Necessary for the Xcode generator, in which the CMakeLists.txt
files are added as sources merely for convenient access, without
any associated custom command.
Implement cmGlobalGenerator::ComputeTargetObjects in the Ninja generator
to pre-compute all the object file names. Use the results during
generation instead of re-computing it later.
Describe the OBJECT library signature of add_library and the
$<TARGET_OBJECTS:...> expressions needed to use object libraries.
Also document the what is not allowed for object library targets.
For now do not allow an OBJECT library to reference other object
libraries. Teach cmTarget::ComputeLinkImplementation to include the
languages of object libraries used by a target.
The write code introduced by commit 0b0d1b1d (add CMakeCache.txt
support, 2001-02-22) uses a temporary file but does not replace the
original atomically. Use cmGeneratedFileStream to do both
copy-if-different and atomic replacement.
Before, find_package in Config mode always set Foo_FOUND to true if the
Config file has been found and could be executed.
If the Config file itself detected some problem, like a missing dependency,
it did not have a way to signal to the outside that the package is not working.
With this patch, if a Config file sets Foo_FOUND to FALSE, this is taken into
account and not overridden.
Alex
Treat OBJECT libraries as STATIC libraries. The VS project file format
provides no way to avoid running the librarian so hide the resulting
.lib away next to the object files as it should never be referenced.
The object files will be left behind for reference by other targets
later.
This library type can compile sources to object files but does not link
or archive them. It will be useful to reference from executable and
normal library targets for direct inclusion of object files in them.
Diagnose and reject the following as errors:
* An OBJECT library may not be referenced in target_link_libraries.
* An OBJECT library may contain only compiling sources and supporting
headers and custom commands. Other source types that are not normally
ignored are not allowed.
* An OBJECT library may not have PRE_BUILD, PRE_LINK, or POST_BUILD
commands.
* An OBJECT library may not be installed, exported, or imported.
Some of these cases may be supported in the future but are not for now.
Teach the VS generator that OBJECT_LIBRARY targets are "linkable" just
like STATIC_LIBRARY targets for the LinkLibraryDependencies behavior.
On machines where a usr/bin/packagemaker symlink is found, we were
unable to find the version.plist file relative to the symlink.
Resolve the symlink first, so we can find it relative to the
real PackageMaker.
Add cmGeneratorTarget::ObjectDirectory member to hold the value. In
ComputeTargetObjects set the value to the full path to the target object
directory including any necessary placeholder for the configuration
name.
CMake does not automatically pass the Fortran module output directory
location to the module search path. Add a note to the documentation
that the location must also be specified by INCLUDE_DIRECTORIES.
Rename cmGlobalGenerator::GetCMakeCFG{InitDirectory => IntDir} to
have a shorter name without a typo. Add a 'const' qualifier since
the method is only for lookup and never needs to modify anything.
Implement cmGlobalGenerator::ComputeTargetObjects in the VS generator
to pre-compute all the object file names. Use the results during
generation instead of re-computing it later.
Add a virtual cmGlobalGenerator::ComputeTargetObjects method invoked
during cmGeneratorTarget construction. Implement it in the Makefile
generator to pre-compute all object file names for each target. Use
the results during generation instead of re-computing it later.
Construct the instances after the final set of targets is known but
before computing inter-target dependencies. This order will allow
initialization of cmGeneratorTarget instances to adjust and finalize
declared inter-target dependencies.
Some per-target information and logic is common to all generators.
Some of that information is currently stored in cmTarget but that
should be reserved for the configure step. Create a class to hold
per-target information for generators. On construction classify
sources from the target and store them in separate members. This
classification is already implemented separately in each generator.
The long-standing sporadic failures of CPack tests on the Mac dashboards
are caused by an occasional problem running hdiutil. To compensate for
this, a retry loop was added in the code in a previous commit: a9fa71a4
... but the logic for breaking out of the retry loop was flawed, breaking
out of the loop (and not retrying) when the hdiutil command returns an
error instead of when it returns success.
This commit fixes the flawed logic, bumps up the number of retries from
4 to 10, and adds a half-second delay in between retries.
The delay is specifically added in case a virus checker or spotlight indexer
is temporarily causing the hdiutil failure by hanging onto a newly created
file longer than hdiutil expects it to.
As with all sporadically occurring issues, we'll never know if this is
really fixed all the way. But I'll be happy even if we can only get it to
happen just a bit less often.
Xcode 4.3 installs into "/Applications" by default, from the Mac App Store.
Also, the paths to the available SDKs changed: they are now within the
Xcode.app bundle.
PackageMaker is installed as a separate program, and may be installed
anywhere. It is not installed with Xcode 4.3 by default anymore.
Download the "Auxiliary Tools for Xcode" to get PackageMaker.
Put PackageMaker inside the Xcode.app bundle, in its nested Applications
folder, or put it alongside Xcode in "/Applications" and CMake will find
it.
Update references to "find" paths: add new possible locations for finding
Xcode.app and PackageMaker.app. Prefer the most recent version's locations
first, but keep the old locations as fallback search paths, too.
Thanks to all the contributors who provided and tested out various patches
for fixing this issue. Especially, but by no means limited to:
Francisco Requena Espí, Jamie Kirkpatrick and drfrogsplat.
b28e7fa VS6: Avoid SBCS test on VS6 (#12189)
df19b9c VS6: Avoid _MBCS define when _SBCS is defined (#12189)
ba89e92 Visual Studio: Allow setting Single Byte Character Set (#12189)
d662dff Fix shadowed variable warning on dashboard results
f66e735 Fix compiler warning reported on older Borland dashboard.
d90eed4 Fix compiler error reported on older Borland dashboard.
8233636 Update the documentation regarding INCLUDE_DIRECTORIES.
d899eb7 Call ExpandVariablesInString for each target's INCLUDE_DIRECTORIES
c21db87 Make search paths ordered and unique
22021f0 Remove cmMakefile::GetIncludeDirectories
9106b56 Extract and use the INCLUDE_DIRECTORIES target properties.
840509b Keep the INCLUDE_DIRECTORIES target property up to date.
a4d5f7b Add API to get the ordered includes for a target.
8adaee2 CMake: Eliminate cmMakefile::IncludeDirectories
7620932 Remove include flags memoization.
97a5faa Make it safe to call this method without creating duplicates.
edd5303 Refactor GetIncludeFlags to take includes instead of fetching them
If in Config mode a configuration file could not be found, cmake printed
an error, but did not actually stop processing. With SetFatalErrorOccured
it does.
Alex
Simplify cmLocalVisualStudioGenerator::ComputeObjectNameRequirements to
loop over the original vector of source files instead of recursively
traversing source groups just to find the same files. Drop from
cmVisualStudio10TargetGenerator::ComputeObjectNames temporary source
group calculation now that it is not needed for computing object names.
Remove partial implementation added by commit ca0230a3 (check in initial
conv library stuff, 2007-02-16) since it was never finished. It does
not make sense for multi-configuration generators since no specific
build configuration is processed at CMake time.
This allows downstreams to use
set(CMAKE_WIN32_EXECUTABLE ON)
set(CMAKE_MACOSX_BUNDLE ON)
to create executables with the WIN32_EXECUTABLE and MACOSX_BUNDLE
properties set on by default.
09ff226 Merge branch 'add-const-qualifiers' into doxygen-fixes
31ab25c doxygen: MathCommand is not about string operators
486033a doxygen: review cmake.h
937bb4b doxygen: remove a few comments
4774590 doxygen: fix some comments in cmPolicies.h
4a48be3 doxygen: Small fixes in cmake.h apidocs
1e5b971 doxygen: Use proper syntax to document enum
54ab11c doxygen: Improve API docs of GetRealDependency
80072d4 doxygen: cmPropertyDefinition
eeaaffc find_package: Test error and warning messages in failure cases
52dffb9 Merge branch 'test-CMakeCommands' into find_package-improve-messages
d365104 find_package: Optionally warn when implicitly using Config mode
31ead5f find_package: Reject mixed use of MODULE- and CONFIG-only options
6d83083 find_package: mention requested version number in error message
9c39bbd find_package: add CONFIG mode keyword alias for NO_MODULE
f310f67 find_package: add MODULE mode to use only Find-modules
7d67dcf find_package: improve error message when no Find module is present
978d89b find_package: rename NoModule to UseFindModules
Remove dependency on /Developer/Headers/FlatCarbon when creating SLAs for DMG images.
Instead, of adding those .r files on the command line, include the necessary .r files
from the generated .r file.
Define variable CMAKE_FIND_PACKAGE_WARN_NO_MODULE for use by a project
that wants to use an explicit mode in every call to find_package in
order to generate more specific failure messages. Word the warning
using the new CONFIG and MODULE mode keywords when the minimum required
version of CMake is new enough to have them. Otherwise word the warning
using the old NO_MODULE mode keyword.
Inspired-by: Alex Neundorf <neundorf@kde.org>
Explain exactly why CMake is looking for a package configuration file
and who is expected to provide what:
CMake Error at CMakeLists.txt:7 (find_package):
By not providing "Find<pkg>.cmake" in CMAKE_MODULE_PATH the caller
has asked CMake to find a package configuration file provided by
"<pkg>", but CMake did not find one.
Could not find a package configuration file provided by "<pkg>"
with any of the names:
<pkg>Config.cmake
<pkg>-config.cmake
Add the installation prefix of "<pkg>" to CMAKE_PREFIX_PATH or
set "<pkg>_DIR" to a directory containing one of the above files.
If "<pkg>" provides separate development package or SDK be sure
it has been installed.
The first paragraph explains how CMake is interpreting the intention of
the caller. This puts the blame or credit at the call site in the
project code where it belongs both when it is a bug and when it is
intentional. It can be dropped in NO_MODULE mode.
Suggested-by: Brad King <brad.king@kitware.com>
In commit 41c2895b (Added version support to Config mode of find_package
command, 2008-01-28) the error message was computed but was not
reported. Add the SetError call to report it.
The purpose of the TargetType enumeration was overloaded for install
type because install rules were once recorded as targets. Factor the
install types out into their own enumeration.
This concerns all variables common to all CPack generators.
Variables mainly used and/or set in CPack.cmake are documented
therein. C++ built-in variables are documented in
cmCPackDocumentVariables.cxx.
The confluence of the ninja-generator and target-include-directories
branches conspired to produce a nice little compiler error when
they were both merged into 'next'...
Yay for Continuous dashboards!
For strict backwards compatibility only. This should be unnecessary at
this point, but introducing a policy to deprecate it properly is a
whole different topic branch...
Eliminate callers of cmMakefile::GetIncludeDirectories.
All callers of GetIncludeDirectories should go through the local generator
object.
Only the local generator calls cmTarget::GetIncludeDirectories directly.
35c48e1 Check*.cmake: Expand imported targets in CMAKE_REQUIRED_LIBRARIES
61cb4ea bootstrap: move while() and endwhile() into the bootstrap build
c9f2886 -don't pull in CheckTypeSize.cmake from the cmake which is being built
628f365 -remove trailing whitespace
Generally these are only required in build statements, as Ninja wants
to be able to chop paths up. But it doesn't hurt to also try to use
them in command line arguments.
This did not work because find_library() did only treat the given name as
complete filename if is matched "PREFIX.*SUFFIX":
find_library(MYLIB libfoo.so.2)
Now it is also taken as a whole if the name matches "PREFIX.*SUFFIX\..*".
If a variable exists called CMAKE_PROJECT_<projectName>_INCLUDE,
the file pointed to by that variable will be included as the last step
of the project command.
For Visual Studio using the Preprocessor Define _SBCS. This behavior
is similar to the way that _UNICODE and _MBCS work already.
Added tests to confirm this behavior.
Append a random number to the "cmTryCompileExec" file name to avoid
rapid creation and deletion of the same executable file name. Some
filesystems lock executable files when they are created and cause
subsequent try-compile tests to fail arbitrarily. Use a different
name each time to avoid conflict.
Even if there are no lines covered in the file the gcov coverage report still
contains valueable information, the amount of uncovered lines and which exactly
they are. Set 'Covered="true"' for files we have a gcov report for even if they
have no lines covered. Otherwise CDash will neither show the uncovered line
count nor the detailed coverage report for this file.
When CTEST_EXTRA_COVERAGE_GLOB was used to collect otherwise uncovered files
'Covered="true"' was unconditionally set, so this can't be worse here.
d4b77eb Avoid discovering system infos for documentation. Adding some path is enough.
9002f73 Fix non existent std::string::clear on VS6
02ccb32 Create getDocumentedModulesListInDir which may be used in other context.
24fbc28 Add missing section markup for CPackComponent
bafd8a9 Example of builtin variable documentation (i.e. only used in C++ source code).
543f1ad Make the load of script documentation more efficient and dynamic.
cdbd1a9 Fix another compiler warning due to a typo
52c53de Really avoid compiler warning about unused vars
37f90ed Calm down compiler warning about unused var
7c82b7f Fix potential bad memory access, thanks to Eike
62b589b Suppress unused var, beautify code, avoid 1 extra newline.
751713f Update bash completion file in order to handle new CPack doc options.
1629615 CPack Documentation extraction from CMake script begins to work
83e34dd Implement simple CMake script comment markup language.
c6a0169 CPack begin the implementation of --help-command* and --help-variables*
CPack help will be searched in any CPack*.cmake file located
near to CPack.cmake file. The script files is parsed iff
the first line begin with ##section. Moreover the documentation
section name is specified on the remaining part of the line
minus the space immediately following ##section.
OpenBSD shared library names end in a ".#.#" version number suffix.
Teach cmComputeLinkInformation to tolerate the extra suffix after
the normal library name suffixes when parsing library names.
5d18851 CPackArchive restore default behavior and provide new variable.
3cab24a CPack Add top level directory in component install for Archive Generators
When configuring or generating the 'ng' of the end of the second line
is not cleared. This patch fixes this.
The problem was introduced by commit fd632195 (ccmake: Align 'g' and 'q'
key instructions, 2011-01-07) which adjusted the length of lines that
need clearing.
The approach taken by commit 8704525f (Reject directory names containing
'=', 2011-01-14) was perhaps too heavy-handed for avoiding the obscure
cases when '=' in the path fails due to limitations of Make syntax.
Only two CMake tests:
LinkDirectory
OutOfSource
fail when the path contains '=' and they cover obscure cases. Instead
of rejecting such paths outright just warn when the problem may occur.
An implementation ;-separated list parsing was added by commit a1f976ce
(VS: Add support for three new project properties, 2011-11-23) and again
by commit 9e01aefd (VS: Add support for WinRT project properties,
2012-02-03). Refactor both instances to use ExpandListArgument.
VS_WINRT_EXTENSIONS: Boolean property that correspond to "Enable
Tailored Features" in Visual Studio 11 IDE.
VS_WINRT_REFERENCES: Semicolon-delimited list of *.winmd references to
add to the project, which creates a new <ItemGroup>.
CPACK_COMPONENT_INCLUDE_TOPLEVEL_DIRECTORY should be set by the user
in order to get the toplevel directory included in the archive
whenever a componentized archive is requested. This solves bug #12129
and keeps fully backward compatible behavior.
CMake doesn't find Visual C++ Express and uses "NMake Makefiles"
generator by default when one calls cmake WITHOUT using the -G options.
Teach CMake to find VC Express to use it as the default generator just
like the commercial versions.
Consider the case motivating commit e01cce28 (Allow add_dependencies()
on imported targets, 2010-11-19). An imported target references a file
generated at build time by a custom target on which it depends. Had the
file been built directly using add_library or add_executable its target
name would have been visible globally. Therefore the imported target
representing the file should be globally visible also.
Teach the IMPORTED signature of add_(executable|library) to accept a new
"GLOBAL" option to make the imported target visible globally.
- Enhance extract doc parser. Seems robust now. The legacy
module documentation parser works as before ignoring
the new markup.
- Proof of concept for CPack (generic), CPack RPM and CPack Deb
generator for macro and variables.
Try cpack --help-command and cpack --help-variables
The language is very simple. It use ##<keyword> special comment
which opens a structured documentation block and ##end closes it.
This may be used to extract documentation for macro as 'command'
and 'variables' such that cpack --help-command and --help-variable
does parse builtin modules files (CPack.cmake, CPackComponent.cmake,
...) in order to extract the corresponding doc.
This modifications set tries to keep the unified doc for cmake/ctest/cpack
while introducing tool specific documentation separated.
Some documentation sections for CMake do not fit well to CPack.
0df1942 Detect SGI MIPSpro compiler version with its id
a5e892c Document compiler version macro formats used for detection
d7c6f41 Detect HP compiler version with its id
3dd9fa9 Detect SunPro compiler version with its id
c198730 Detect Watcom compiler version with its id
5899b98 Detect Clang compiler version with its id
b8cfa65 Detect PGI compiler version with its id
6dae666 Detect IBM XL compiler version with its id
4080d55 Detect Borland compiler version with its id
2cc205a Detect Intel compiler version with its id (#11937)
a6d83cc Detect MSVC compiler version with its id
a662855 Detect GNU compiler version with its id (#6251)
fa7141f Add framework to detect compiler version with its id (#12408)
Since commit 183b9509 (Follow all dependencies of shared library private
dependencies, 2011-12-14) we honor LINK_INTERFACE_LIBRARIES when
following dependent shared libraries. The link interface properties may
form a cycle if set incorrectly by a project. Furthermore, the property
LINK_DEPENDENT_LIBRARIES may form a cycle if set incorrectly by hand
(though CMake should never generate one). In either case, do not follow
the cycle forever when following the dependent shared library closure.
We only need to add dependency edges to the constraint graph once.
Add "LinkInterfaceLoop" test to cover this case.
This wasn't necessary for TAR-like (TGZ, TBZ2, etc...) archive
because for those the size was 0. Either there is an error in
upstream libarchive concerning the size or we should not rely
on size of the entry for adding content.
6c611c6 libarchive: Restore CMake 2.6.3 as minimum version
2f5b677 libarchive: Update README-CMake.txt for new snapshot
156cb3b Merge branch 'libarchive-upstream' into update-libarchive
fd42bf1 libarchive: Set .gitattributes to allow trailing whitespace
4f4fe6e libarchive 3.0.2-r4051 (reduced)
65b6e19 libarchive: Avoid bogus conversion warning from PGI compiler
9ccaeb1 libarchive: Suppress PathScale compiler warnings
2309438 libarchive: Rename isoent_rr_move_dir parameter isoent => curent
b6ca96e libarchive: Include linux/types.h before linux/fiemap.h
f293b73 libarchive: Define _XOPEN_SOURCE=500 on HP-UX
6781a09 libarchive: Cleanup after ZLIB_WINAPI check
f15d757 libarchive: Remove hard-coded build configuration
3a9f449 libarchive: Use Apple copyfile.h API only if available
6af6b96 libarchive: Do not use MNT_NOATIME if not defined
02d5e40 libarchive: Check for 'struct statvfs' member 'f_iosize'
8b7ee30 libarchive: Do not use ST_NOATIME if not defined
...
Instead of enabling interrupt only when a progress or message callback is called, add a new callback specifically for
interrupt. This new callback is called from GetFatalErrorOccured() so cmake-gui can immediately report interrupt status
instead of calling queuing a call to cmSystemTools::SetFatalErrorOccured() and waiting for the progress or message
callback to be called to process that queued call.
This adds a test that uses two project commands in the same CMakeLists.txt
file. It also adds a fix so that cmake --build will work in that case.
The fix sets the name of the last project command in the top level
CMakeLists.txt in the cache variable CMAKE_PROJECT_NAME. This variable
is used by cmake --build to find the project name.
Now also CMAKE_ASM_INCLUDE_PATH is written into
CMakeDirectoryInformation.cmake, which is necessary to make
the dependency scanning for included files work.
Alex
Fix a crash which occurs when SystemTools::GetPath attempts to process
an empty environment variable.
Author: Vladimir Panteleev <vladimir@thecybershadow.net>
QKeySequence::Quit does not work on all platforms, and since it
translates to Ctrl+Q on all platforms where it does work, Ctrl+Q was
hardcoded instead.
Fix the regex meant to match errors of the form:
C:\some\dir\source.cpp(17): catastrophic error: could not open source file "some_header.h"
to make the space between ')' and ':' optional.
The default OS X 10.4 linker incorrectly searches for dependencies of
linked shared libraries only under the -isysroot location. It fails to
find dependencies of linked shared libraries in cases such as the
ExportImport test. It produces errors like:
/usr/libexec/gcc/i686-apple-darwin8/4.0.1/ld: warning can't open dynamic library:
libtestLib3Imp.dylib
referenced from: /.../ExportImport/Root/lib/libtestLib3lib.1.2.dylib
(checking for undefined symbols may be affected) (No such file or directory, errno = 2)
/usr/libexec/gcc/i686-apple-darwin8/4.0.1/ld: Undefined symbols: _testLib3Imp
referenced from libtestLib3lib expected to be defined in
libtestLib3Imp.dylib
or with CMAKE_SKIP_RPATH off to enable install_name in the Export side:
/usr/libexec/gcc/i686-apple-darwin8/4.0.1/ld: warning can't open dynamic library:
/Developer/SDKs/MacOSX10.4u.sdk/.../ExportImport/Export/impl/libtestLib3Imp.dylib
referenced from: /.../ExportImport/Export/libtestLib3lib.1.2.dylib
(checking for undefined symbols may be affected) (No such file or directory, errno = 2)
/usr/libexec/gcc/i686-apple-darwin8/4.0.1/ld: Undefined symbols:_testLib3Imp
referenced from libtestLib3lib expected to be defined in
/.../ExportImport/Export/impl/libtestLib3Imp.dylib
Note how "/Developer/SDKs/MacOSX10.4u.sdk" is prepended to the dependent
library path.
Commit 2cff26fa (Support linking to shared libs with dependent libs,
2008-01-31) and commit 82fcaebe (Pass dependent library search path to
linker on some platforms, 2008-02-01) worked around the problem by
defining platform variable CMAKE_LINK_DEPENDENT_LIBRARY_FILES. It tells
CMake to link to dependent libraries explicitly by their path thus
telling the linker where to find them.
Unfortunately the workaround had the side effect of linking dependent
libraries and defeats most benefits of LINK_INTERFACE_LIBRARIES.
Fortunately OS X 10.5 and above do not need to find transitive
dependencies at all so we can avoid the workaround on Modern OS X.
In cmComputeLinkDepends we compute the transitive closure of private
shared library dependencies. When a shared library is added to this
closure we must follow all of its dependencies whether they are private
or public. Previously we only followed the private dependencies. Fix
the implementation to follow the public dependencies too. Also extend
the ExportImport test to cover this case.
Adds "include progress.make" to build.make, just like for
add_executable and add_library targets. The code was copied
from cmMakefileTargetGenerator::WriteCommonCodeRules().
Commit 1be4b6f4 (Order VS local generator Version ivar values
consistently, 2011-11-10) fixed the Version ivar of the VS 10 local
generator by setting it correctly to 10 instead of leaving it at 7.
This broke generation of .vfproj files for the Intel Fortran plugin to
VS 10 by mixing VS 9 and 10 formats together in one file. Teach the
local generator to pretend the Version is 9 for Intel Fortran targets.
automoc now defaults to strict mode, also with Qt4, i.e. it behaves as
the documentation says by default. I also inverted the switch
CMAKE_AUTOMOC_STRICT_MODE to CMAKE_AUTOMOC_RELAXED_MODE.
Docs and test adapted accordingly.
Alex
Generate the rerun dependency file for the top-level project() and each
subdirectory project() into the corresponding build directory. Do not
clobber them all with the one for the last subproject. This mistake was
left from when the Xcode generator did not produce subprojects.
2d11951 Merge branch 'master' into AutomocIncludedDotMocFileHandling
1eca18f automoc: add documentation for CMAKE_AUTOMOC_STRICT_MODE
bc278ce automoc: fix line length
62e223e automoc: add variable CMAKE_AUTOMOC_STRICT_MODE, to enable strict parsing
40c5167 automoc: accept even more .moc files in non-strict mode
c207f5d automoc: also accept other files when .moc is included in non-strict mode
9c0df72 automoc: add a StrictParseCppFile(), which is only qmake-compatible
174bf35 automoc: move the code for finding headers into separate function
8507eae automoc: fix handling of included _p.moc files
7ada172 automoc: some more linebreaks for the warnings for better readability
3b93e26 automoc: add extra check whether the header contains Q_PRIVATE_SLOT
4745715 Add a test case for the use of Q_PRIVATE_SLOT.
bde4edb automoc: add special handling for including basename_p.moc, with test
74ab0f6 automoc: move some code from the big parsing loop into separate functions
bc7560e automoc: add test for including a moc_abc_p.cpp file
30fd8e6 automoc: add test for including the moc file from another header
...
Teach CMakePlatformId.h to construct an "INFO:compiler_version[]" string
literal from macros COMPILER_VERSION_(MAJOR|MINOR|PATCH|TWEAK) to be
defined in CMake(C|CXX)CompilerId.(c|cpp) for each compiler. Provide
conversion macros DEC() and HEX() to decode decimal or hex digits from
integer values. Parse the version out of the compiler id binary along
with the other INFO values already present.
Store the result in variable CMAKE_<LANG>_COMPILER_VERSION in the format
"major[.minor[.patch[.tweak]]]". Save the value persistently in
CMake(C|CXX)Compiler.cmake in the build tree. Document the variable for
internal use since we do not set it everywhere yet.
Report the compiler version on the compiler id result line e.g.
The C compiler identification is GNU 4.5.2
Report CMAKE_(C|CXX)_COMPILER_(ID|VERSION) in SystemInformation test.
ae62a1c Test CMAKE_GNUtoMS option in ExportImport on MinGW and MSys
afb00fe Add CMAKE_GNUtoMS option to convert GNU .dll.a to MS .lib
61e8629 Factor makefile generator link rule lookup into helper function
a603250 Load platform files that need to know the ABI when possible
ecd8414 Fortran: Detect pointer size in gfortran on MinGW
Teach the Windows-GNU.cmake platform file to look for Visual Studio
tools matching the target ABI. Add an extra step to the link command
for shared libraries and executables that export symbols and on which a
new GNUtoMS property is set (initialized by the CMAKE_GNUtoMS option).
Tell the GNU linker to output a module definition (.def) file listing
exported symbols in addition to the GNU-format import library (.dll.a).
Pass the .def file to the MS "lib" tool to construct a MS-format DLL
import library (.lib).
Teach the install(TARGETS) command to install the MS import library next
to the GNU one. Teach the install(EXPORT) and export() command to set
the IMPORTED_IMPLIB property pointing at the import library to use the
import library matching the tools in the importing project.
Load platform files named in CMAKE_<lang>_ABI_FILES for each language
once the ABI sizeof(void*) is known. During the first configuration
this is after the test for working compiler and ABI detection checks.
During later configurations the ABI information is immediately available
because it has been saved in CMake<lang>Compiler.cmake.
ParseCppFile() is the one which is automoc4/KDE4-compatible, and which
becomes a bit crowded. By separating these two it is easier to ensure
that the strict one doesn't get broken accidentially.
Alex
Since the export() command needs to know the final location of a target
in the build tree we cannot allow properties affecting the location or
name of a target file to be set after the target is passed to export().
Fix a violation of this rule in the SimpleInstall test.
ac2e45d Provide std::ios_base typedef on GCC < 3
28c46ca cmNewLineStyle: Use cmStandardIncludes.h
75e83e9 cmNewLineStyle: Remove trailing comma in enum
be6502c bootstrap: Include cmNewLineStyle in build
a087490 Add NEWLINE_STYLE option to configure_file (#3957)
This ensures that stl types are compiled consistently with
the reset of CMake. Otherwise one may get errors like
Undefined symbol: .cmNewLineStyle::ReadFromArguments(
const std::vector<std::_LFS_ON::basic_string ...)
due to inconsistent large file support definitions.
This is again for KDE4 compatiblity. If foo.moc is included, in general
moc should run on foo.cpp. Usually this can't cause problems.
It can only cause problems if moc must run on the header, and the resulting
file must be included in the cpp file, which is the case with the
Q_PRIVATE_SLOT macro.
This makes the test added by Stephen pass.
Alex
VS_GLOBAL_PROJECT_TYPES: A string containing UUIDs to embed in the
Visual Studio project file under <ProjectTypes>.
VS_GLOBAL_KEYWORD: Allows specification of a keyword like "ManagedCProj"
instead of the default "Win32Proj", under <Keyword>
VS_DOTNET_REFERENCES: Semicolon-delimited list of .NET references to add
to the project, which creates a new <ItemGroup>.
Remove extra parens in test for not handling LINK_INTERFACE_LIBRARIES.
Remove redundant test for equality with ProcessingPrivateInterface
subsumed by test for inequality with ProcessingPublicInterface.
982b766 Eclipse: use new variable CMAKE_ECLIPSE_GENERATE_SOURCE_PROJECT
1110e45 Eclipse: create links to subprojects also in the source-project (#12579)
Typical <package>Config.cmake files for find_package() rely only on the
files generated by install(EXPORT). They might be wrong, for whatever
reasons, like people manually deleted files, projects were packaged
wrong by distributions, whatever. To protect against this, add checks
that the file locations we are importing actually exist on disk.
Alex
Up to 100 completion strings for the names of added variables
are saved in the settings, so it will remember the variables
you are usually adding.
It also ensures that CMAKE_INSTALL_PREFIX is always there, since
this is maybe the one which is set most often.
Alex
Previously ECLIPSE_CDT4_GENERATE_SOURCE_PROJECT was used, but the
new name CMAKE_ECLIPSE_GENERATE_SOURCE_PROJECT is more in line with
the general naming conventions in cmake, and, more importantly IMO,
in cmake-gui it now appears right next to the other eclipse-related
variables, which all start with CMAKE_ECLIPSE_.
A warning is printed if the old variable is TRUE and the new one isn't,
so users should notice that they have to enable the new one.
Alex
Similar fix to commit d093abef for the Makefile generators. Prevents
premature exit from sequence of commands. Even when no errors occur,
the previous construct without "call " was exiting the sequence before
executing the full set of commands...
Add a cast to lines converting "uint64_t" to "unsigned int" that are
known safe due to use of modulus with a small integer. This avoids
compiler warnings such as
conversion from 'cm_sha2_uint64_t' to 'unsigned int',
possible loss of data
from MSVC.
-enable the KDE4-compatiblity mode only when using Qt4
-always (except in the KDE4 compat mode) error out if a cpp-file
contains "Q_OBJECT", but does not include filename.moc
Alex
Define an abstract API around the backend hash algorithm. Expose
ifstream errors to HashFile callers. Always try opening the file.
Succeed only if the end of file is reached without error.
537020f Tests: Nudge MFC test to pass on VS 6 dashboards (#11213)
51f442e VS11: Update InstallRequiredSystemLibraries.cmake for VS11 (#11213)
d85ab7a Tests: Add environment logging to the MFC test (#11213)
011694c VS10: Use expected values for UseOfMfc (#11213)
a2e6d24 Tests: Fix MFC test to work with VS 10 and later (#11213)
Since the parent commit the local generator Version ivar may be
compared for ordering. Convert comparisons:
"==VS10" becomes ">=VS10"
"!=VS10" becomes "< VS10"
to support an explicit enumeration value for VS11 with no change
in behavior.
Move the Version member to the top cmLocalVisualStudioGenerator class
and set it consistently for instances created by all the global
generator versions. Use an enumeration type with values scaled by a
factor of 10 so we can handle VS 7.1 without out-of-order numbers.
VS 7.1 support for SuppressStartupBanner was broken by commit 25116a3c
(Fix CMAKE_VERBOSE_MAKEFILE for VS10 vcxproj files, 2011-10-11) because
it assumed comparison of VS version numbers works. Now it does.
Handing th std::string instead the char* to the find()
reduces the time from 17 to 15 seconds (for a 1000 times loop of a
relatively small file), which is around 10 percent.
Alex
There are multiple/many places in KDE where the developer includes
moc_foo.cpp, and expects moc to run on foo.cpp, instead of foo.h.
He should use foo.moc, but right now this is handled by automoc4,
so we must stay compatible. So support this too, but warn about
it.
Alex
Use expected values for the UseOfMfc xml element in
VS 10 .vcxproj files.
CMAKE_MFC_FLAG=1 maps to "Static"
CMAKE_MFC_FLAG=2 maps to "Dynamic"
all other values map to "false"
Thanks to Randy Schott and McBen for their patches which
served as inspiration and motivation for getting this done.
See also http://public.kitware.com/Bug/view.php?id=11224
The Watcom WMake tool has trouble running commands in paths that have
parentheses. We already convert most commands to a shortpath for Watcom
if the path contains a space, but the use of $(CMAKE_COMMAND) hides the
true path from that conversion. Factor the shortpath conversion code
out into a new ConvertShellCommand method. Teach it to convert paths
that contain parentheses as well as spaces. Use the new method to
convert the value of $(CMAKE_COMMAND) and other helper variables.
Teach cmComputeLinkInformation to generate the "-framework" option as a
separate link item preceding the actual framework name. Then escape the
framework name to pass as an argument through a shell. This fixes the
link line for frameworks with spaces in the name.
The build system generators that call cli.GetItems() and generate the
final list of items on the link line already handle escaping correctly
for items that are paths. However, for raw link items like "-lfoo" they
just pass through to the command line verbatim. This is incorrect. The
generators should escape these items too. Unfortunately we cannot fix
that without introducing a new CMake Policy because projects may already
be passing raw link flags with their own escapes to work around this
bug. Therefore we punt on this bug for now and go with the above fix.
Eclipse doesn't handle this case well. When doing out-of-source builds
we create a linked resource which points to CMAKE_SOURCE_DIR, so the
user can browse the source dir in Eclipse. This is not possible
when the build dir is a subdir of the source dir.
Alex
CommandLineArguments.cxx:
remark #181: argument is incompatible with corresponding format
string conversion
SystemInformation.cxx:
remark #193: zero used for undefined preprocessing identifier "_WIN32"
warning #177: variable "Regebx" was declared but never referenced
SystemTools.cxx(375):
remark #444: destructor for base class "std::vector<char*>" is not virtual
class kwsysDeletingCharVector : private kwsys_stl::vector<char*>
Author: Hans Johnson <hans-johnson@uiowa.edu>
Change-Id: Ibc899c3ba14990158ef7bbabace4b435b22495c3
This commit adds a new target property AUTOMOC_MOC_OPTIONS, which
can be set to add extra options for the moc invocations done via automoc.
This is equivalent to the OPTIONS parameter in the qt4_wrap_cpp() macro.
Alex
Set the working directory for make targets which are associated
to virtual folders, otherwise Eclipse simply runs make from the
current working directory (where Eclipse has been started), and
where probably not the correct makefile is located.
Alex
Judging from the questions I see on the #cmake IRC channel this is one
of the most common pitfalls for people coming from other build systems,
especially plain Makefiles. Finally put this into the documentation to
stop people getting fooled into using this.
Text by Brad King.
Provide the ability to configure CTest with settings different from the ones
available in the source tree by checking first if CTestConfig.cmake
exists in the build tree.
The motivation is to allow build system checking out external project to
test and/or package them and submit the associated results to a different
dashboard than the one specified (or not) in the source of the external
project.
For example, the build system of Slicer can checkout, build, test
and package what I will call "extensions". These extensions can be developed
by third parties who can test and submit to their own dashboard / project.
When checked out by Slicer build system, the default dashboard can now be
overwritten by adding a custom CTestConfig.cmake to the build directory.
And if not overwritten, it would avoid to create CTestConfig.cmake within
the source checkout of the extension.
Important when calling ctest commands in a loop from a script.
Each time Populate gets called, it uses the current definition
of the variable. Without the clear, it was accumulating additional
identical values each time through the loop.
66bd543 Eclipse: fix#12417, don't create wrong src pathentries
70de8bd Eclipse: detect number of CPUs, set CMAKE_ECLIPSE_MAKE_ARGUMENTS accordigly
117f2b8 Eclipse: add Build and Clean targets to targets
c3f30bd Eclipse: move code for generating links to targets into separate function
cef6bd9 Eclipse: move code for generating links to projects into separate function
b6d4de7 Eclipse: add virtual folder for each target
5e8e9ad automoc: always run moc on the cpp file if there is a foo.moc included
ea8ac9f Add copyright notices
56aa6ff automoc:run moc on the header if the source file contains include "foo.moc"
In the log entry, the newline is missing. The output without the newline
character is a bit strange, like
SetCTestConfigurationFromCMakeVariable:MemoryCheckCommand:CTEST_MEMORYCHECK_COMMANDSetCTestConfiguration:MemoryCheckCommand:/usr/bin/valgrind
Instead of
SetCTestConfigurationFromCMakeVariable:MemoryCheckCommand:CTEST_MEMORYCHECK_COMMAND
SetCTestConfiguration:MemoryCheckCommand:/usr/bin/valgrind
This patch changes this to add a newline.
Signed-off-by: Bernhard Walle <walle@corscience.de>
Define variable CMAKE_LINK_INTERFACE_LIBRARIES to initialize the
value of this property when a target is created. This allows authors
to write
set(CMAKE_LINK_INTERFACE_LIBRARIES "")
to disable transitive linking to implementation dependencies of shared
libraries on platforms where it is possible.
They were miss-aligned with the 'enter' key instruction.
Before:
----
Press [enter] to edit option CMake Version 2.8.3.20110107-g4b05a-dirty
Press [c] to configure
Press [h] for help Press [q] to quit without generating
----
After:
----
Press [enter] to edit option CMake Version 2.8.3.20110107-g4b05a-dirty
Press [c] to configure
Press [h] for help Press [q] to quit without generating
----
Actually the Eclipse generator now does not create any CDT_SOURCE
pathentries anymore, since I was not able to find out what they are
good for, not even by asking on the cdt-dev mailing list.
So, at least the warning from eclipse about bad pathentries are gone
this way, and I didn't see anything which was not working anymore.
Let's see whether we can find out what they are good for.
Alex
With this commit the virtual folder for the targets now
have "Build" and "Clean" targets associated to them, so you can
build and clean per-target now in the project explorer.
Alex
This makes automoc behaves as the documentation says.
If there is a #include "foo.moc" in the source file, moc
will be executed on foo.cpp.
Before it was also executed on foo.cpp, but only if foo.cpp
contained a Q_OBJECT macro, otherwise moc was executed on
foo.h. This was confusing, and this change also shouldn't break
anything, since the headers are moc'ed anyway if they contain
a Q_OBJECT macro.
Alex
This fixes#12533.
Before automoc did not check the header if the source file contained a
statement, now it does.
Additionally, moc is now only run on explicitely listed headers which
contain a Q_OBJECT macro.
Alex
COVERAGE_EXTRA_FLAGS is a space separated value of extra flags
that will be passed to gcov when ctest's coverage handler invokes
gcov to do coverage analysis.
Map to CoverageExtraFlags in the CTest ini file. Use default value
of "-l" to match the coverage handler's earlier behavior from ctest
2.8.4 and earlier. The fix for related issue #11717 had added a " -p"
which was the cause of both #12415 and #12490. Here, we revert that
change to the default value, so -p is no longer there by default.
The people that care to add -p may do so in their own build trees
by appending " -p" to the new cache variable COVERAGE_EXTRA_FLAGS.
For each target a virtual folder is created, which contains
one virtual folder for each sourcegroup, which contain
links to the actual source files (#12294, #12223)
Alex
dcd2459 Eclipse: better message when Eclipse version could not be determined
b4b2fc3 Eclipse: don't create VirtualFolders if not supported
5b200e3 Detect whether the current Eclipse version supports VirtualFolders
4974ec9 Eclipse generator: detect Eclipse version
32f8437 Fix line-too-long style violations
029ab31 Constify XCode generator getters to match cmGlobalGenerator
fec4b63 Fix configuration-dependent flag lookup in cmLocalGenerator::GetTargetFlags
557956f Introduce a cmGlobalGenerator::ResolveLanguageCompiler function
5b114c9 Introduce a cmLocalGenerator::ConvertToIncludeReference function
903d914 Make cmLocalGenerator::ConvertToLinkReference virtual
8a0eb78 Constify many getters of cmGlobalGenerator.
4532d36 Add const versions of some getters.
3db2973 Refactor TargetTypeNames.
Commit 8a0eb78f (Constify many getters of cmGlobalGenerator, 2011-03-26)
added const qualifiers to many cmGlobalGenerator methods but left the
resulting lines beyond our style's limit of 79 characters.
Commit 8a0eb78f (Constify many getters of cmGlobalGenerator, 2011-03-26)
added const qualifiers to many cmGlobalGenerator methods. Fix the
signature of the virtual function overrides in cmGlobalXCodeGenerator to
match.
Files for the ASM language are those assembler files which are processed
by the C/CXX compiler, and they may contain preprocessor directives, so
run the C dependency scanner also on them.
Alex
Specifically, perform configuration-dependent lookup of
STATIC_LIBRARY_FLAGS for static libraries, and use the correct prefix
for configuration-dependent lookup of LINK_FLAGS (i.e. "LINK_FLAGS_",
as opposed to the value of the LINK_FLAGS property).
Make it a static method instead of an array. It is safer for the
type checking and if we add a new target type we will be warned to add
a case to the switch.
As Dave Cole pointed out the previous commit only checked for 10.x and 12.x.
11.0 was accounted for, but 11.1, 11.2 and 11.3 were not. This patch
should make it work for those versions as well. I did a web check and there
are 11.0, 11.1, 11.2 and 11.3 versions from Intel. I assume if 12.x uses
11.0 as the version in the .vfproj file, then all of the 11.x versions would
as well.
f15945e Use makefile->IssueMessage() for better error messages
c886e31 Improve behaviour of --find-package mode with try_run/try_compile
31f43fd Remove trailing whitespace
The intel compiler for 12.0 and 12.1 are known to expect the file version
to be 11.0 in the .vfproj file. For 10.x it should be 9.10. Prior to
this fix 12.0 and 10.1 were the only values checked. If those did not match
the actual version of intel was put in the vfproj file causing an error
about future version load attempt in the IDE.
All find_* commands re-root the list of paths and then add trailing
slashes. Factor this pair of calls out into a dedicated method. The
new method would be the only caller to AddTrailingSlashes, so subsume
that method into it.
If a http server responds with a result code greater than 400 then the
data returned from the download probably do not match that expected.
Teach file(DOWNLOAD) to fail with an error in this case instead of
silently pretending that the download worked. The file(UPLOAD) command
already does this.
Instead of failing with an error message which says things have not been
setup correctly, it now says that try_compile/try_run() are not
supported in find_package mode (#12426).
Alex
Caveats apply: only valid when not overriding default value for output
dir *and* there is a CMAKE_XCODE_EFFECTIVE_PLATFORMS value.
For now, CMAKE_XCODE_EFFECTIVE_PLATFORMS must be defined in each
project, or in the cache for a build.
Code relying on value of LOCATION and similar properties may not
work if it depends on file existence on disk since CMake will not
evaluate $(EFFECTIVE_PLATFORM_NAME). This feature is only enabled
for making it easier to build Xcode iOS projects where the developer
wants to be able to switch easily between simulator and device builds.
90efed6 Xcode: Honor Fortran_FORMAT target and source file property
5c0c635 Fortran: Add support for free- and fixed-form flags
47a0c75 VS: Map Fortran free- and fixed-format flags to IDE options
d6e2a06 VS: Map per-source Fortran flags to IDE options
The '-E build build_dir' command was created and documented, but then
morphed into '--build build_dir' instead, ... and then the -E documentation
was never removed. This commit fixes that oversight.
...when building CPack archive-based packages (.tar.gz and similar)
Rather, put the symlinks-to-directories into the archive as files,
and expect/trust that the things the symlinks point to are also in
the archive.
Do not recurse through directory symlinks when adding files.
Recursing through directory symlinks will generate broken archives,
i.e., they will look something like this:
foo -> bar/bar
foo/Info <- Shouldn't be in archive.
bar/bar
bar/bar/Info
This behaviour was previously broken; regardless of the
RecurseThroughSymLinks value, symlinks to directories were
NEVER added as files in the results.
When RecurseThroughSymLinks is ON, symlinks to directories
should be recursed as if they were the actual directories
to gather the files within.
However, when RecurseThroughSymLinks is OFF, symlinks to
directories should be returned as files in the result.
Inspired-by: Johan Björk <phb@spotify.com>
Previous code was missing some matches in the output. This commit
fixes the regular expressions used for output matching to detect
numbers reported with commas in them, too.
Without this call, recent refactoring changes in the Visual
Studio generators yield no GUIDs saved in the cache. Putting
the SaveCache here *once* avoids scattering many calls to it
in specific generators.
Added hashing fuction for std::string. This adds default support for
std::strings to KWSys hashing containers.
Author: Bradley Lowekamp <blowekamp@mail.nih.gov>
Suggested-by: Arnaud Gelas <arnaud_gelas@hms.harvard.edu>
Change-Id: I7e7a0c356b73d19868a3df1db57b702ec7fffe9d
Define a "Fortran_FORMAT" target and source file property. Initialize
the target property from a "CMAKE_Fortran_FORMAT" variable. Interpret
values "FIXED" and "FREE" to indicate the source file format. Append
corresponding flags to the compiler command line.
59238dc Fix --find-package mode on Cygwin, where enable_language(RC) is called
98472e4 Require the current cmake version in --find-package mode
a6ccf3c Use $(CXXFLAGS) and $(LDFLAGS) in the --find-package test Makefile
4386918 Fix line length
7d69310 Only enable the test when using GNU make
3011149 Make the test harder by always having a space in the include dirs
ab57ff6 Make the --find-package test harder
626fc71 Much improved test, should now be executed on all UNIXes
ec6982d Disable any STATUS output in --find-package mode
e552ae7 Dont check for -isysroot and -mmacosx-version on OSX in --find-package mode
e589589 Rename helper macros print_compile_flags() to set_compile_flags_var()
aecfc1f Fix test on OpenBSD with BSD make
6bb4ca3 The makefile for the test was kindof wrong
fd15b5e Only run the test if we are using a makefile generator under UNIX
9fc87c6 Add a test for the new --find-package mode
d3ae0ff Improve documentation for --find-package mode
bf07375 Add a cmake.m4 for using cmake in autoconf projects instead of pkgconfig
b0e3578 Use the file-utility to test for 64bit if there is no /usr/lib64
53edfb2 Better support for lib64 and Debian multiarch
b8fdaa1 Fix copyright notice in new CMakeFindPackageMode.cmake
7690edf Replace cmake::GetScriptMode() with GetWorkingMode()
e4f603b Implement find-package mode of cmake
a91d662 Add find-package mode, which does nothing yet
b976e70 Make clLocalGenerator::GetTargetFlags() public
920a046 QtAutomoc: Eliminate compiler warning
b00463f QtAutomoc test: Pass QT_QMAKE_EXECUTABLE
e78ce44 Fix automoc with VS builds: apply patch from Bill
71165e9 Silence warning in automoc: use long instead of int
1879bcc Fix build: use std::ios::out|ios::trunc instead of std::ios_base::out
678e124 Only enable the automoc test after checking that Qt4 works
71c29d1 Fix bootstrap test with automoc
afb3edc Fix warnings
add30e9 Fix build: non-void function must return a value
7e6d845 Automoc.cmake is not needed anymore
2963d0b Fix logic which decides when to execute automoc test
77a5c6e Add documentation for AUTOMOC, add initialization via CMAKE_AUTOMOC
bf8ef77 Add a test for automoc
d045fd4 Nicer progress message for the automoc target
50cd6ce Move automoc processing from add_executable/library to cmGlobalGenerator
cbaac2a Remove trailing whitespace
c27607b Refactor SetupAutomocTarget() so it can be run after creating the target
24d9b7d Remove trailing whitespace
58b7fe6 Use cout instead of printf()
72caf4d Add the generated automoc.cpp file to the cleaned files
ddb517d Color output when running moc
9303295 Initialize verbose based onb the env.var.
ace1215 Move code for parsing a cpp-file from the big loop to separate function
735a5bb Fix line lengths
83b730c Add AUTOMOC to the add_library() command
126c6ea Add the cmake module required currently for automoc
de91feb Remove the need to check for .h/.cxx during buildtime
d65689a Add actual automoc code from automoc
d1c0a5f Start implementing skeleton for automoc in cmake
a65011b Start work on automoc: add empty cmQtAutomoc class
For project and target objects, save their ids in CMakeCache.txt.
Hopefully, that will be enough to allow user settings to be saved
across multiple CMake generate operations. Other object types may
also need their ids saved: if so, more code than this commit
will be necessary...
If you had a + in the name of a target with nmake, it created a variable
in the makefile that used + in its name, which is not allowed by nmake.
To make the implementation easier, + is now not allowed for any make
generators as part of a variable name.
In SystemTools::ClassInitialize, remove call to AddTranslationPath
that was originally put in place to "work around an SGI problem."
This code precluded using CMake effectively in valid directories
under "/tmp_mnt/"
c9761de Improve documentation for WriteBasicConfigVersionFile.cmake
208bb90 Set UNSUITABLE instead of not COMPATIBLE
bb03c2d Really fix copyright notice
d50a61a Fix copyright notice
4ba09bc Add some tests for write_basic_config_version_file()
02b1e4b Add example to documentation
d216a67 Provide macro write_basic_config_version_file()
Any STATUS output will be fed directly to the compiler, which
will not understand any status messages. Error messages
are fine, since they are errors and it is ok if the compiler
fails in such cases.
Alex
It already works :-)
Needs more refactoring, e.g. using the cmake facilities to turn a string
into a vector etc.
Also still missing is the part which creates the custom target.
Alex
Makes VS 7, 8 and 9 generators consistent with the VS 10
generator. Adds the "AdditionalIncludeDirectories" attribute
at the vcproj level so that all idl files inherit the /I
command line args.
For the specialization of hash<>(), the types long long and __int64
may be the same type. While the CMakeLists indicate that if __int64 is
a alias for another type the it will not be enabled, on mingw they
both appear to be the same type and enabled.
This patch only enable specialization for long long OR __int64 to
avoid the potential conflict.
Author: Bradley Lowekamp <blowekamp@mail.nih.gov>
Change-Id: I813a9ac008b296fab5a369c48e6dd5460fd0c035
Added hash function for types long long and __int64, conditional on
detection by FundamentalType.
Author: Bradley Lowekamp <blowekamp@mail.nih.gov>
Change-Id: Ie273f55cd4387ca3dbbe00b9d96ad4935e456c9e
For custom commands in VS2010 Fortran projects the INTDIR variable
is different than in the rest of the solution because Intel
fortran still uses the old VS project files even in VS2010. So,
we replace $(Configuration) directly in the project files. I have also
added a FortranOnly test that tests this feature and is run on any
generator that has Fortran abilities.
We already use GetSystemTimeAsFileTime() and gettimeofday()
unconditionally on supported Windows and non-Windows platforms,
respectively. Remove outdated portability complexity.
This deterministic ordering makes it easier for a developer
comparing the ctest output of two test runs to see what changed
from run to run.
Thanks to Fraser Hutchison for the patch.
e2e8c0a Also put builtin include dirs into CodeBlocks project file
92c0dc5 Remove useless line of code
a5683f8 Patch by Campbell Barton: puts definitions into C::B project file
b62349c FeatureSummary.cmake: update documentation
f366cf8 FeatureSummary.cmake: cosmetics
f407bb5 FeatureSummary.cmake: only higher TYPEs can override previous TYPEs
02d47ab FeatureSummary.cmake: error out when a REQUIRED package is missing
91a1527 FeatureSummary.cmake: add INCLUDE_QUIET_PACKAGES keyword
0671a02 FeatureSummary.cmake: remove "comment" field
aae13f4 Extend FeatureSummary: add PURPOSE of package and TYPE
Refactor code from CMakeFindEclipseCDT4.cmake so it can be used
alkso for CodeBlocks, and move it into new file
CMakeExtraGeneratorDetermineCompilerMacrosAndIncludeDirs.cmake.
Alex
This macro can be used to generate basic version files which can be
installed along a Config.cmake file to provide versioning support.
This (3rd try) is implemented using a macro, which maps
the COMPATIBILITY mode to a filename and configure_file()s the
resulting file.
Alex
Since commit 85c0a69a (Cygwin: Do not define 'WIN32', 2010-12-17) WIN32
is not defined on Cygwin. Update documentation of the WIN32 variable
accordingly.
Fix NSIS template to more thoroughly use CPACK_PACKAGE_INSTALL_REGISTRY_KEY.
This allows different versions of software to have a separate sections in the
registry to keep track of things (installed components, and uninstall stuff).
Change default of CPACK_PACKAGE_INSTALL_REGISTRY_KEY to follow the value of
CPACK_PACKAGE_INSTALL_DIRECTORY so if an installation overwrites another installation,
the proper registry entries are more likely to be overwritten.
Fix CPack/NSIS generator to not insert code in the NSIS template to skip installation
of already installed components. This enables a repair like behavior and also enables
installing patch releases on top of an older installation.
Thanks to Pau Garcia i Quiles for the inspiration for the patch.
I've tweaked it a bit compared to what's in the bug tracker: this
commit does not allow empty global variable names.
I also added usage of the new feature to an existing test. Although
it has no effect on the resulting Visual Studio projects, you can
verify that the VSResource test produces a non-empty globals section
in the generated .vcproj(x) files.
4a50b5f Add a basic test for CMAKE_DISABLE_FIND_PACKAGE_<package>
a66df08 Add documentation for the CMAKE_DISABLE_FIND_PACKAGE_<Name> switch
6e1d3ed Add a switch to disable a find_package() call completely
Now found packages are not stored in ENABLED/DISABLED_FEATURES
anymore, but always in PACKAGES_FOUND/NOT_FOUND.
ENABLED/DISABLED_FEATURES is now only used via
ADD_FEATURE_INFO(), e.g. for stuff set via option().
Alex
set_property() has APPEND, which creates a list. E.g. when
appending to COMPILE_FLAGS a string is needed, not a list.
With the APPEND_STRING option the value is append as string,
not as list.
Alex
In find-package mode, cmake executes Modules/CMakeFindPackage.cmake,
which calls find_package(), and this is then evaluated in cmake.cxx,
which prints an appropriate message to stdout, so it can be used
e.g. in a normal Makefile:
$ /opt/cmake-HEAD/bin/cmake --find-package -DNAME=JPEG
-DCOMPILER_ID=GNU -DLANGUAGE=C -DMODE=EXIST
JPEG found.
$ /opt/cmake-HEAD/bin/cmake --find-package -DNAME=JPEG
-DCOMPILER_ID=GNU -DLANGUAGE=C -DMODE=COMPILE
$ /opt/cmake-HEAD/bin/cmake --find-package -DNAME=JPEG
-DCOMPILER_ID=GNU -DLANGUAGE=C -DMODE=LINK
-rdynamic -ljpeg
Alex
A common mistake when using custom commands is to list the output of a
command in multiple targets that may build in parallel. Warn against
this case in the documentation and suggest a better approach.
Update cm_sha2.[hc] from sha2.[hc] in "sha2-1.1-ALPHA.tgz" downloaded
today from
http://www.aarongifford.com/computers/sha.html
with trivial whitespace cleanup. This adds SHA-224 support.
Copy cm_sha2.[hc] from sha2.[hc] in "sha2-1.0.tar.gz" downloaded today
from
http://www.aarongifford.com/computers/sha.html
with trivial whitespace cleanup. Also fix #include to account for
rename.
8555c2b Look for VCExpress as a possible build tool as well as devenv.
ed0075b Use relative paths for custom command inputs.
38368d5 Revert "With very long file names, VS 2010 was unable to compile files."
8cd66dc Use devenv instead of msbuild for vs2010.
For source files we use full paths. This allows for longer directory
names with VS2010. However, the use of full paths causes the GUI
to not display the custom commands.
As discussed, this adds a switch CMAKE_DISABLE_FIND_PACKAGE_<name>,
which, when set to TRUE, keeps the find_package() command from executing.
When the package is REQUIRED at the same time, an error is generated.
Alex
The workaround added by commit 7e92f0b4 (Hack to make echo command work
properly in mingw32-make, 2006-10-05) and updated by commit 69356d8a
(Juse use cmake -E echo instead of the native echo, 2006-10-13) no
longer seems necessary with modern mingw32-make. Furthermore it slows
performance due to the time spent loading a cmake process instead of
plain echo.
Do not require the C language to be enabled to do lib->lib64 conversion.
The check was originally added by commit a5825cd1 (check in new find
stuff, 2006-03-02) to ensure that CMAKE_SIZEOF_VOID_P is set. Since
commit 3fdf1411 (FIND_LIBRARY should not require CMAKE_SIZEOF_VOID_P,
2008-02-11) the code following the check does not fail when the variable
is not set, so just remove the original check. This allows conversion
for any language that is enabled so long as the address size is known.
Reported-by: Christoph Höger <choeger@cs.tu-berlin.de>
1ed19bc multiarch: Set CMAKE_LIBRARY_ARCHITECTURE_REGEX for Linux|Hurd|kFreeBSD
52a6ed2 Test find_package multiarch support (#12037)
b41ad3b Teach find_(library|package) about Linux multiarch (#12037)
When add_test(NAME) is called without the CONFIGURATIONS argument then
the test is intended to run in any configuration. In multi-config
generators like the VS IDE and Xcode tests created by add_test(NAME) can
only be run when testing a known configuration (otherwise there is no
way to generate the test command line). If no test command line is
known for a particular configuration, or if no configuration is given to
ctest, report the test as not run instead of silently skipping it.
Also fix CMake's own TestsWorkingDirectory test invocation to correct a
previously silent failure exposed by this change.
When generating per-config blocks in test and install scripts replace
the form
IF()
# config == A
ENDIF()
IF()
# config == B
ENDIF()
with
IF()
# config == A
ELSEIF()
# config == B
ELSE()
# no config matches
ENDIF()
for clarity and to support the else() case cleanly.
f09ba0f Fix style errors added by parent and grandparent
eeeeca1 XCode: Support target folders on XCode.
59ed84e Xcode: Support multiple level nesting of XCode folders (#10039)
d0a403f CMake: Move tokenize to cmSystemTools
Implement support for multiarch as specified here:
http://wiki.debian.org/Multiarchhttps://wiki.ubuntu.com/MultiarchSpec
Detect the <arch> part of <prefix>/lib/<arch> from the implicit library
search path from each compiler to set CMAKE_<lang>_LIBRARY_ARCHITECTURE.
Define CMAKE_LIBRARY_ARCHITECTURE using one of these values (they should
all be the same). Teach the find_library and find_package commands to
search <prefix>/lib/<arch> whenever they would search <prefix>/lib.
27aa446 One more try. Use full path by default, and relative on broken compilers.
2dfc121 Use bin tree for inclues to avoid -I with spaces in the path.
6d29b4b Append and do not clobber CMAKE_CXX_FLAGS in the test.
7815e90 Fix for bug#10798. VS10 did not append -I flags with COMPILE_FLAGS prop.
KWSys Robot
David Cole
Brad King
Bill Hoffman
Alex Neundorf
Peter Kuemmel
Alexandru Ciobanu
Eric NOULARD
Stephen Kelly
Konstantin Tokarev
Yury G. Kudryashov
Rolf Eike Beer
Clinton Stimpson
Peter Collingbourne
Bjoern Ricks
Modestas Vainius
Aaron C. Meadows
Nicolas Despres
Eugene Golushkov
Daniel Nelson
Raphael Kubo da Costa
Johan Fänge
Valat Sébastien
Aaron Ten Clay
Robert Dailey
Rolf Eike Beer
Jean-Christophe Fillion-Robin
Bernhard Walle
Johan Bjork
Niels Dekker
Matt McCormick
Johannes Stallkamp
Thomas Jarosch
Steven Velez
Matej Hribernik