Since commit c8ef6430 (Allow directory names containing '=' and warn if
necessary, 2012-02-06) we allow directories with '=' instead of
rejecting them as was previously done since commit 8704525f (Reject
directory names containing '=', 2011-01-14). However, we did not warn
in all cases that '=' may cause failure, such as when it appears on the
right-hand side of a dependency line.
Both commits above were made assuming that '=' cannot be escaped in Make
syntax, but it can be achieved with a variable:
EQUALS = =
left$(EQUALS)side : right$(EQUALS)side
Use this approach to escape '=' in dependency lines, thus supporting
the character in paths.
All our tests now pass when CMake is built in source and build trees
both containing '=', except for the "OutOfSource" test. It fails in
its coverage of the obscure "OutOfBinary" test case where part of the
build tree is located outside the main build tree of the test. The
reason is that CMake must invoke a command like
$(MAKE) -f /path/with=sign/build.make /path/with=sign/somefile
but the make tool interprets the last argument as a variable assignment.
This is an acceptable limitation, since the case is so obscure, in
exchange for supporting '=' cleanly otherwise.
When reading archive entries from disk strip any "fflags" entry headers
that may have been loaded from the filesystem when libarchive is built
with HAVE_STRUCT_STAT_ST_FLAGS (struct stat has 'st_flags'). The local
filesystem flags are not useful for distribution. Furthermore, GNU tar
does not understand the "SCHILY.fflags" extended header used to store
the flags in the archive. Use the approach from commit e8558efa
(cmArchiveWrite: Clear xattr and acl from entries, 2011-04-07) to remove
the flags and avoid producing the non-portable extended header.
When MinGW is used slashes are used for dependencies
because ar.exe can't read rsp files with backslashes.
Many thx to Claus Klein for starting working on this.
Building CMake with g++ 2.9-aix51-020209 on an AIX 5.3 system gives:
cmsys/hashtable.hxx: In function `const long unsigned int *cmsys::get_stl_prime_list ()':
cmsys/hashtable.hxx:399: warning: sorry: semantics of inline function static data
`const long unsigned int _stl_prime_list[31]' are wrong (you'll wind up with multiple copies)
cmsys/hashtable.hxx:399: warning: you can work around this by removing the initializer
Give get_stl_prime_list internal linkage.
3545645 Exclude the CompileCommandOutput test on WIN32.
fbaddf4 Escape the source file to be compiled if required.
db839be Make the CMAKE_EXPORT_COMPILE_COMMANDS option work with Ninja.
8778357 Add newline to the output.
2c04bc0 Move the EscapeJSON method to a sharable location.
4986d52 Use CPACK_xxx and CMAKE_xxx in a consistent way.
f90223c Fix KWStyle warning
47f0dbd CPack add necessary check to detect/warns/error on ABSOLUTE DESTINATION
6ba055b CPack add easy possibility to warn about CPACK_SET_DESTDIR
Commit "KWSys: Fix SystemTools environment memory handling" (2012-04-26)
added a _WIN32 case inside !KWSYS_CXX_HAS_ENVIRON_IN_STDLIB_H to dllimport
the "environ" global. Howver, KWSYS_CXX_HAS_ENVIRON_IN_STDLIB_H is true
on every Windows toolchain we support so the case is never reached.
Furthermore, even if it were reached the use of dllimport is incorrect
because the toolchain might not be compiling with a dynamic runtime
library. Remove the unused incorrect line and supporting conditionals.
Fortran sources that pass through the C preprocessor may use
#include "header"
syntax or
#include <header>
syntax. CMake already follows the former. Teach it to follow the
latter.
More generally add the check for possible generator "activation" at
runtime depending on a generator specific check.
The dynamic behavior is currently implemented only for MacOS
and should be fully backward compatible for other system.
Inspired-By Tom Hughes <tomtheengineer@gmail.com>
CMAKE_xxx vars are now used in the CMake-generated cmake_install.cmake
script while CPACK_xxx equivalent vars are used from within CPack.
CPack is responsible for getting/forwarding definitions of
CPACK_xxxx var corresponding to CMAKE_xxxx when invoking
CMake-generated install scripts.
As a consequence:
CMAKE_ABSOLUTE_DESTINATION_FILES
CMAKE_WARN_ON_ABSOLUTE_INSTALL_DESTINATION
CMAKE_ERROR_ON_ABSOLUTE_INSTALL_DESTINATION
may be used from outside CPack as well.
e.g.
cmake -DCMAKE_ERROR_ON_ABSOLUTE_INSTALL_DESTINATION=1 -P cmake_install.cmake
works as expected.
c806b23 CDash now supports lots of files in coverage. So, show all files.
761d931 Do not try to run bullseye coverage if COVFILE env is empty.
5b69ce4 Update test data to match new coverage format.
1b418f1 Change GT.M Coverage Parser global
b0c07a1 Disable bullseye coverage for mumps coverage test.
0a169e6 Remove uncovered files from cache coverage data.
a7abf5e Add ability to specify more than one package directory or coverage directory.
220afca Use <TARGET_FILE> expression to run ctest so it works with Xcode and VS IDE.
62f6bce Use a script to run the test because WORKING_DIRECTORY is not in 2.8.2.
f5c5db0 Fix some warnings and a bug where it went past the length of a vector.
7955e99 Add support for Cache coverage.
a86cd33 Add virutal destructor to silence warning.
319eeb0 Add test for mumps coverage. Also refactor code to prepare for cache coverage.
72210c2 Fix line length.
dd07161 Fix warning about char* instead of const char*.
e6412e0 Add support to ctest for GTM mumps coverage.
In trace mode ('--trace'), any 'elseif' or 'else' commands that are
evaluated as part of a conditional block will be printed. Previously,
only the opening 'if' command of a conditional block was printed.
The [usually] wrong usage of absolute DESTINATION in INSTALL rules
keeps popping-up on the ML. We shall have some way to:
1) easily detect it.
2) forbids this for some CPack generator like NSIS
In fact it should certainly be forbidden for *any* generators
when used on Windows but we may implements that on top of the current
patch.
The patch ask the task to the generated cmake_install.cmake scripts.
Those scripts are a little bit more complicated with that but
iff there are absolute DESTINATION. This cost nothing if relative
DESTINATION are used.
Two new vars are introduced (and documented to handle that):
CPACK_WARN_ON_ABSOLUTE_INSTALL_DESTINATION
and
CPACK_ERROR_ON_ABSOLUTE_INSTALL_DESTINATION
Until now an unnamed component was always named "Unspecified".
Now this name is taken from the new cmake variable CMAKE_INSTALL_DEFAULT_COMPONENT_NAME,
which is initialized to "Unspecified". But it can now be set to something
project-specific, per directory
Alex
The coverage global should be in the local namespace. This means the global
will be ^ZZCOVERAGE instead of ^COVERAGE. Change the parser to look for ^ZZCOVERAGE
instead of the old ^COVERAGE
Header files listed in a target's PUBLIC_HEADER or similar properties
are marked as OS X Framework content. Refactoring performed by
commit 11d9b211 (Add cmGeneratorTarget to represent a target during generation, 2012-03-07)
commit 45c2f932 (Simplify cmMakefileTargetGenerator using cmGeneratorTarget, 2012-03-07)
commit 328c0f65 (Simplify cmVisualStudio10TargetGenerator source classification, 2012-03-19)
and related commits accidentally removed such files from treatment as
normal header files by the VS generator (generators other than Makefiles
and Xcode). Move handling of such files out of cmGeneratorTarget and
back to cmMakefileTargetGenerator. The central cmGeneratorTarget
classification will always treat them as header or extra sources.
The hash_fun.hxx header is configured whether FundamentalType is enabled
or not and so cannot depend on it. Run the relevant platform tests
whether or not FundamentalType is on and configure the result directly
into hash_fun. While at it, remove the dependence of SystemInformation
on FundamentalType too since it needs only information that we now
always compute.
d931ce9 VS10: Generate relative source paths when possible (#12570)
b2e7c7a VS11: Do not use source path conversion workaround specific to VS 10
4248132 VS10: Convert paths normally unless forced to relative
c2ba6ba VS10: Simplify vcxproj.filter file generation
4f2d9d2 VS10: Refactor custom commands to use WriteSource
Add a boolean target property NO_SONAME which may be used to disable
soname for the specified shared library or module even if the platform
supports it. This property should be useful for private shared
libraries or various plugins which live in private directories and have
not been designed to be found or loaded globally.
Replace references to <CMAKE_SHARED_LIBRARY_SONAME_${LANG}_FLAG> and
hard-coded -install_name flags with a conditional <SONAME_FLAG> which is
expanded to the value of the CMAKE_SHARED_LIBRARY_SONAME_${LANG}_FLAG
definition as long as soname supports is enabled for the target in
question. Keep expanding CMAKE_SHARED_LIBRARY_SONAME_${LANG}_FLAG in
rules in case third party projects still use it. Such projects would
not yet use NO_SONAME so the adjacent <TARGET_SONAME> will always be
expanded. Make <TARGET_INSTALLNAME_DIR> NO_SONAME aware as well. Since
-install_name is soname on OS X, this should not be a problem if this
variable is expanded only if soname is enabled.
The Ninja generator performs rule variable substitution only once
globally per rule to put its own placeholders. Final substitution is
performed by ninja at build time. Therefore we cannot conditionally
replace the soname placeholders on a per-target basis. Rather than
omitting $SONAME from rules.ninja, simply do not write its contents for
targets which have NO_SONAME. Since 3 variables are affected by
NO_SONAME ($SONAME, $SONAME_FLAG, $INSTALLNAME_DIR), set them only if
soname is enabled.
Since commit ed0075bd (Use relative paths for custom command inputs,
2011-06-22) CMake generates full paths to source files in VS 10 project
files to avoid trouble with deep source/build tree paths. However, the VS
10 IDE will not populate the source file property dialog for a file
referenced by full path. Instead use a relative path when possible. When
not possible produce a detailed warning explaining the problem and
suggesting use of shorter directory paths.
CMake <= 2.8.4 generated VS 10 project files with a relative path to
source files. Then commit ed0075bd (Use relative paths for custom command
inputs, 2011-06-22) switched to using relative paths only for source files
holding custom commands and full paths for other sources. This behavior
was inhereted by the VS 11 generator but is not needed so use the
workaround only for exactly VS 10. Explain the behavior in comments.
Most CMake generators produce relative paths within the build tree and
full paths to files outside the build tree. Make VS 10 and VS 11
project files consistent with this approach except for paths forced to
be relative to work around a VS 10 bug.
Remove the duplicate source file classification logic used to generate
the filter files. Instead record during the main vcxproj file
generation the source files generated for each tool. Also record
whether or not each source file is converted to a relative path. Use
the recorded result during filter generation to ensure consistency
between the project file and filter file.
The SystemTools::PutEnv function tries to provide the "putenv" API
without leaking memory. However, the kwsysDeletingCharVector singleton
frees memory that may still be referenced by the environment table,
having been placed there by putenv. If any static destruction or
processing by an external tool happens after the singleton is destroyed
and accesses the environment it will read invalid memory.
Replace use of putenv with setenv/unsetenv when available. The latter
manage internal copies of the values passed instead of referencing the
original memory. When setenv/unsetenv are not available use putenv with
a singleton that removes its values from the environment before freeing
their memory. This requires an "unputenv" implementation. On at least
some platforms it must be written in terms of "putenv" because other
APIs are not available and direct modification of the "environ" global
is not safe (e.g. on Windows there is interaction with "wenviron").
Fortunately either putenv("A=") or putenv("A") will remove "A" from the
environment on these platforms. On other platforms fall back to direct
manipulation of "environ".
Also add UnPutEnv to the API and add a test for the behavior of both.
Generate anchors of the form
<a name="..."></a>
instead of
<a name="..."/>
to ensure browsers know that the anchor contains no text and do not try
to guess an end of the range. Also make the "section_Index" and item
label anchors empty instead of containing the section header or label
text. This ensures that the text associated with target anchors is not
rendered as if it were a hyperlink.
Since commit 4fbdce2b (try_compile: Use random executable file name,
2012-02-13) a different <target>.dir is used for each try-compile.
Cleanup the directories as well as their content to avoid accumulating
leftover temporary directories.
c9747f3 Ninja: CMAKE_USE_NINJA is the name of the macro
2a081a2 Ninja: no additional variable needed to enable ninja
b8c3e8c Ninja: enable Ninja for CodeBlocks
11bd9b5 Ninja: remove GCC -Wshadow warning
f93e818 Ninja: add option to enable ninja where it is not enabled by default
73426ac Ninja: no 16:9 screens for the cmake team ;)
8217c26 Ninja: ensure output directories exist
KWSys is no longer shared in projects via a server-side directory
symlink in CVS. An automated nightly date stamp commit can no longer be
shared by multiple projects directly. It needs a per-project replay
robot so the nightly commits end up needing N+1 robots instead of N.
Remove the DateStamp feature because it is no longer useful or
maintained by nightly commits.
Replace use of AppendEnv/RestoreEnv pairs with instances of
SaveRestoreEnvironment. Simplify the signature of AppendEnv and use it
in place of similar loops elsewhere. Move the RestoreEnv implementation
inside the SaveRestoreEnvironment destructor which is the only place
left that calls it.
Move the CMake version number components out of "CMakeLists.txt" into
dedicated file "Source/CMakeVersion.cmake". Set the TWEAK level to the
date explicitly. Add a "Source/CMakeVersion.bash" script to update the
date, thus replacing KWSys DateStamp for CMake. Teach the bootstrap
script to extract the version components from their new location.
It seems that file.seekg(0) will, in some circumstances, cause the next
file.getline() to omit the first character it reads. Workaround the
bug by seeking from ios::beg explicitly.
Hide custom command .rule files inside the CMakeFiles directory. Ensure
a short, deterministic, and unique name by using a hash of the directory
path containing the output file. Preserve the file name so the entry in
the IDE is human-readable. Clarify the comment that explains why the
rule file must be created on disk.
Add cmGlobalGenerator::GenerateRuleFile to compute a generator-specific
rule file location. This will allow specific generators to override the
location of .rule files without changing the behavior of other
generators.
Teach cmMakefile::AddCustomCommandToOutput to return the cmSourceFile
instance to which the custom command is attached. Use the return value
instead of separately adding a .rule extension and searching for the
source. Mark CMake-generated .rule files explicitly with a property
instead of trusting the file extension.
When loading a find module or package config file the find_package
command defines several variables to provide information about the
caller's request. Previously this was documented only in the
Modules/readme.txt file which is not distributed. Document the
behavior explicitly in the main find_package documentation.
Since commit ed1ea24c (Fix INSERT to allow inserting to empty list,
2006-05-15) the list command allows insertion into an empty list at
index 0. Fix rejection of insertion at non-zero (negative) indices to
present an error message instead of crashing.
While at it, fix the error message of the GET and REMOVE_AT operations
when the list is empty to not present a bogus allowed range.
Add a "RunCMake.list" test to cover failure cases on empty lists.
Commit ffbe61bb (make sure english is used for output of gcov, 2008-05-10)
taught ctest_coverage to set LC_ALL=POSIX to get English output from gcov.
Use the more portable value LC_ALL=C and restore the original value when
finished.
This commit creates a dummy text file for each OBJECT library for
the CodeBlocks generator, so the generated project file can reference
a unique file for each target. Most probably these files are unused.
Alex
01e979a VS: Add CMakeLists.txt re-run rules at start of generation
9a2c60e Classify known header file extensions as headers
1c48992 Always compile sources with known language
Previously, we were setting the default configuration for a generated
Xcode project to the hard-coded string "Debug" even in cases where users
customized their configuration types such that the list did not contain
"Debug". Now, we use the first string listed in CMAKE_CONFIGURATION_TYPES
as the default config for generated Xcode projects.
Refactoring in commit a2514f15 (Simplify cmNinjaTargetGenerator using
cmGeneratorTarget, 2012-03-13) accidentally removed mapping of .def file
paths through ConvertToNinjaPath (via GetSourceFilePath). Take the
ModuleDefinitionFile value from cmGeneratorTarget and map it correctly
through ConvertToNinjaPath.
In addition to generating cleaner paths in the ninja build files this
correctly links up references to a generated .def file with the custom
command output that produces it.
Since commit 328c0f65 (Simplify cmVisualStudio10TargetGenerator source
classification, 2012-03-19) the VS 10 generator uses the
cmGeneratorTarget source classification instead of directly getting the
list of source files from the target. This accidentally dropped the
CMakeLists.txt files from generated projects because they are added too
late for cmGeneratorTarget.
All generator-specific source files must be added to targets prior to
cmGeneratorTarget construction. Refactor addition of the CMakeLists.txt
files with CMake re-run custom commands to take place before normal
generation begins, and therefore early enough to be included in the
cmGeneratorTarget classification.
Commit 328c0f65 (Simplify cmVisualStudio10TargetGenerator source
classification, 2012-03-19) introduced the first use of source
classification from cmGeneratorTarget (which originated as Makefile
generator logic) in a Visual Studio generator for handling of header
files. Fix classification of header files to match known header
extensions instead of only the HEADER_FILE_ONLY property. Make it
consistent with the "Header Files" source group.
Refactoring by commit 11d9b211 (Add cmGeneratorTarget to represent a
target during generation, 2012-03-07) and commit 45c2f932 (Simplify
cmMakefileTargetGenerator using cmGeneratorTarget, 2012-03-07) preserved
behavior introduced by commit 7740ccd1 (some cleanup of the makefile
generator, 2006-02-14) that favored the IgnoreFile extension test over
the availability of a known compilation language associated with a
source file. If a source is not marked as HEADER_FILE_ONLY and has a
known language extension or an explicit LANGUAGE property it should be
treated as that language. The LANGUAGE source file property
documentation says so.
9b32475 automoc: add define to test which caused bug #130182066511 automoc: fix#13018, proper cmake escaping to avoid false rebuilds
c652812 make cmLocalGenerator::EscapeForCMake() static
The variables stored in the AutomocInfo.cmake file were not properly
escaped, so when reading them back they could turn into lists, if they
contained double quotes initially.
This patch fixes this by using cmLocalGenerator::EscapeForCMake() to
escape the variables properly.
Alex
Patch by Amine Khaldi!
Also, start using the -MT flag to set a target name for depfiles.
This works around a bug observed in distcc, as explained in the
comment. Based on a patch by Alexander Usov.
Commit 9a6ff950 (Fix for bug where VS2010 did not use .obj files,
2011-04-01) assumed that if an external object is GENERATED that it is
the output of a custom command in the current target. If it is
generated by another target then VS will not automatically include the
external object in the current target. This bug was preserved by the
refactoring in the parent commit.
Instead use <None> for external objects generated by a custom command in
the current target and <Object> for all other external objects. Update
the ExternalOBJ test to cover this case.
Combine WriteCLSources and WriteObjSources into a single method. Use
the cmGeneratorTarget source classification to simplify tool selection
for each source file. Extend the classification to handle .idl files.
0cf8447 find_package: additional test for checking the error message
56ae3f9 find_package: add test for setting Foo_FOUND to FALSE in a Config file
16c0c73 find_package: allow <pkg>Config.cmake to set <pkg>_FOUND to FALSE
0f4dfa6 CPack: Use real path to PackageMaker to find its version file (#12621)
4693cf8 Xcode: Detect new default locations of Xcode 4.3 bits and pieces (#12621)
* ninja-object-library: (37 commits)
Ninja: Honor $<TARGET_OBJECTS:...> source expressions
Build object library targets in Ninja
Pre-compute object file names before Ninja generation
Simplify cmNinjaTargetGenerator using cmGeneratorTarget
Ninja: Avoid using 'this' in member initializers
Ninja: Fix for PDB files with spaces in the path.
Ninja: Constify use of cmCustomCommand
Ninja: add /DEF: flag to linker call
Ninja: Add a cache option CMAKE_ENABLE_NINJA to enable the ninja generator.
Ninja: Add friend struct so it can access the private ConvertToNinjaPath.
Ninja: add .def file support
Ninja: ensure the output dir exists at compile time
Ninja: Remove an unnecessary variable
Ninja: Use cmSystemTools::ExpandListArgument to split compile/link commands
Ninja: Add a missed license header
Ninja: CMake: Adapt Ninja generator for per-target include dirs
Ninja: windows msvc: create for each target a .pdb file
Ninja: Import library support for Windows
Ninja: mark the Windows specific hacks with a comment only
Ninja: disable unfinished Windows ninja support
...
Treat OBJECT libraries as STATIC libraries. The Xcode project file
format provides no way to avoid running the libtool so hide the
resulting .a away next to the object files as it should never be
referenced. The object files will be left behind for reference by other
targets later.
This patch adds documentation for OPTIONAL_COMPONENTS to cmFindPackage.cxx,
and also extends Modules/readme.txt significantly with regard to how
components should be handled.
Alex
Add an OPTIONAL_COMPONENTS keyword to find_package() so we can have a
clear distinction between required and optional components. Don't allow
a component to be both required and optional.
Alex
8485208 Ninja: shell escape $(CMAKE_SOURCE_DIR) and $(CMAKE_BINARY_DIR)
df84767 Ninja: add support for OBJECT_OUTPUTS, fix PrecompiledHeader test case
48eb7fc Ninja: Avoid using 'this' in member initializers
bba37dd Ninja: Fix for PDB files with spaces in the path.
ac800f4 Ninja: Constify use of cmCustomCommand
9a0d5a8 Ninja: add /DEF: flag to linker call
d40eebd Ninja: Add a cache option CMAKE_ENABLE_NINJA to enable the ninja generator.
8c63433 Ninja: Add friend struct so it can access the private ConvertToNinjaPath.
dbe3dce Ninja: add .def file support
f1bb08f Ninja: ensure the output dir exists at compile time
7a6b5f4 Ninja: Remove an unnecessary variable
80ff210 Ninja: Use cmSystemTools::ExpandListArgument to split compile/link commands
d2731a3 Ninja: Add a missed license header
eabc9b0 Ninja: CMake: Adapt Ninja generator for per-target include dirs
bada88e Merge branch 'target-include-directories' into ninja-generator
54bd175 Ninja: windows msvc: create for each target a .pdb file
...
For example, when CPACK_<GEN>_COMPONENT_INSTALL and
CPACK_MONOLITHIC_INSTALL are both set. Previously, this
combination of variable settings produced an error without
any explanation. Now, in this case CPACK_MONOLITHIC_INSTALL wins
without trouble.
This is useful for when e.g. CPACK_ARCHIVE_COMPONENT_INSTALL is
globally on and one wants MONOLITHIC install for STGZ (but not
other generators). The same behavior may be obtained by re-setting
CPACK_ARCHIVE_COMPONENT_INSTALL to 0 but in any case the
'both set' case should have been handled without error.
Necessary for the Xcode generator, in which the CMakeLists.txt
files are added as sources merely for convenient access, without
any associated custom command.
Implement cmGlobalGenerator::ComputeTargetObjects in the Ninja generator
to pre-compute all the object file names. Use the results during
generation instead of re-computing it later.
Describe the OBJECT library signature of add_library and the
$<TARGET_OBJECTS:...> expressions needed to use object libraries.
Also document the what is not allowed for object library targets.
For now do not allow an OBJECT library to reference other object
libraries. Teach cmTarget::ComputeLinkImplementation to include the
languages of object libraries used by a target.
The write code introduced by commit 0b0d1b1d (add CMakeCache.txt
support, 2001-02-22) uses a temporary file but does not replace the
original atomically. Use cmGeneratedFileStream to do both
copy-if-different and atomic replacement.
Before, find_package in Config mode always set Foo_FOUND to true if the
Config file has been found and could be executed.
If the Config file itself detected some problem, like a missing dependency,
it did not have a way to signal to the outside that the package is not working.
With this patch, if a Config file sets Foo_FOUND to FALSE, this is taken into
account and not overridden.
Alex
Treat OBJECT libraries as STATIC libraries. The VS project file format
provides no way to avoid running the librarian so hide the resulting
.lib away next to the object files as it should never be referenced.
The object files will be left behind for reference by other targets
later.
This library type can compile sources to object files but does not link
or archive them. It will be useful to reference from executable and
normal library targets for direct inclusion of object files in them.
Diagnose and reject the following as errors:
* An OBJECT library may not be referenced in target_link_libraries.
* An OBJECT library may contain only compiling sources and supporting
headers and custom commands. Other source types that are not normally
ignored are not allowed.
* An OBJECT library may not have PRE_BUILD, PRE_LINK, or POST_BUILD
commands.
* An OBJECT library may not be installed, exported, or imported.
Some of these cases may be supported in the future but are not for now.
Teach the VS generator that OBJECT_LIBRARY targets are "linkable" just
like STATIC_LIBRARY targets for the LinkLibraryDependencies behavior.
On machines where a usr/bin/packagemaker symlink is found, we were
unable to find the version.plist file relative to the symlink.
Resolve the symlink first, so we can find it relative to the
real PackageMaker.
Add cmGeneratorTarget::ObjectDirectory member to hold the value. In
ComputeTargetObjects set the value to the full path to the target object
directory including any necessary placeholder for the configuration
name.
CMake does not automatically pass the Fortran module output directory
location to the module search path. Add a note to the documentation
that the location must also be specified by INCLUDE_DIRECTORIES.
Rename cmGlobalGenerator::GetCMakeCFG{InitDirectory => IntDir} to
have a shorter name without a typo. Add a 'const' qualifier since
the method is only for lookup and never needs to modify anything.
Implement cmGlobalGenerator::ComputeTargetObjects in the VS generator
to pre-compute all the object file names. Use the results during
generation instead of re-computing it later.
Add a virtual cmGlobalGenerator::ComputeTargetObjects method invoked
during cmGeneratorTarget construction. Implement it in the Makefile
generator to pre-compute all object file names for each target. Use
the results during generation instead of re-computing it later.
Construct the instances after the final set of targets is known but
before computing inter-target dependencies. This order will allow
initialization of cmGeneratorTarget instances to adjust and finalize
declared inter-target dependencies.
Some per-target information and logic is common to all generators.
Some of that information is currently stored in cmTarget but that
should be reserved for the configure step. Create a class to hold
per-target information for generators. On construction classify
sources from the target and store them in separate members. This
classification is already implemented separately in each generator.
The long-standing sporadic failures of CPack tests on the Mac dashboards
are caused by an occasional problem running hdiutil. To compensate for
this, a retry loop was added in the code in a previous commit: a9fa71a4
... but the logic for breaking out of the retry loop was flawed, breaking
out of the loop (and not retrying) when the hdiutil command returns an
error instead of when it returns success.
This commit fixes the flawed logic, bumps up the number of retries from
4 to 10, and adds a half-second delay in between retries.
The delay is specifically added in case a virus checker or spotlight indexer
is temporarily causing the hdiutil failure by hanging onto a newly created
file longer than hdiutil expects it to.
As with all sporadically occurring issues, we'll never know if this is
really fixed all the way. But I'll be happy even if we can only get it to
happen just a bit less often.
Xcode 4.3 installs into "/Applications" by default, from the Mac App Store.
Also, the paths to the available SDKs changed: they are now within the
Xcode.app bundle.
PackageMaker is installed as a separate program, and may be installed
anywhere. It is not installed with Xcode 4.3 by default anymore.
Download the "Auxiliary Tools for Xcode" to get PackageMaker.
Put PackageMaker inside the Xcode.app bundle, in its nested Applications
folder, or put it alongside Xcode in "/Applications" and CMake will find
it.
Update references to "find" paths: add new possible locations for finding
Xcode.app and PackageMaker.app. Prefer the most recent version's locations
first, but keep the old locations as fallback search paths, too.
Thanks to all the contributors who provided and tested out various patches
for fixing this issue. Especially, but by no means limited to:
Francisco Requena Espí, Jamie Kirkpatrick and drfrogsplat.
b28e7fa VS6: Avoid SBCS test on VS6 (#12189)
df19b9c VS6: Avoid _MBCS define when _SBCS is defined (#12189)
ba89e92 Visual Studio: Allow setting Single Byte Character Set (#12189)
d662dff Fix shadowed variable warning on dashboard results
f66e735 Fix compiler warning reported on older Borland dashboard.
d90eed4 Fix compiler error reported on older Borland dashboard.
8233636 Update the documentation regarding INCLUDE_DIRECTORIES.
d899eb7 Call ExpandVariablesInString for each target's INCLUDE_DIRECTORIES
c21db87 Make search paths ordered and unique
22021f0 Remove cmMakefile::GetIncludeDirectories
9106b56 Extract and use the INCLUDE_DIRECTORIES target properties.
840509b Keep the INCLUDE_DIRECTORIES target property up to date.
a4d5f7b Add API to get the ordered includes for a target.
8adaee2 CMake: Eliminate cmMakefile::IncludeDirectories
7620932 Remove include flags memoization.
97a5faa Make it safe to call this method without creating duplicates.
edd5303 Refactor GetIncludeFlags to take includes instead of fetching them
If in Config mode a configuration file could not be found, cmake printed
an error, but did not actually stop processing. With SetFatalErrorOccured
it does.
Alex
Simplify cmLocalVisualStudioGenerator::ComputeObjectNameRequirements to
loop over the original vector of source files instead of recursively
traversing source groups just to find the same files. Drop from
cmVisualStudio10TargetGenerator::ComputeObjectNames temporary source
group calculation now that it is not needed for computing object names.
Remove partial implementation added by commit ca0230a3 (check in initial
conv library stuff, 2007-02-16) since it was never finished. It does
not make sense for multi-configuration generators since no specific
build configuration is processed at CMake time.
This allows downstreams to use
set(CMAKE_WIN32_EXECUTABLE ON)
set(CMAKE_MACOSX_BUNDLE ON)
to create executables with the WIN32_EXECUTABLE and MACOSX_BUNDLE
properties set on by default.
09ff226 Merge branch 'add-const-qualifiers' into doxygen-fixes
31ab25c doxygen: MathCommand is not about string operators
486033a doxygen: review cmake.h
937bb4b doxygen: remove a few comments
4774590 doxygen: fix some comments in cmPolicies.h
4a48be3 doxygen: Small fixes in cmake.h apidocs
1e5b971 doxygen: Use proper syntax to document enum
54ab11c doxygen: Improve API docs of GetRealDependency
80072d4 doxygen: cmPropertyDefinition
eeaaffc find_package: Test error and warning messages in failure cases
52dffb9 Merge branch 'test-CMakeCommands' into find_package-improve-messages
d365104 find_package: Optionally warn when implicitly using Config mode
31ead5f find_package: Reject mixed use of MODULE- and CONFIG-only options
6d83083 find_package: mention requested version number in error message
9c39bbd find_package: add CONFIG mode keyword alias for NO_MODULE
f310f67 find_package: add MODULE mode to use only Find-modules
7d67dcf find_package: improve error message when no Find module is present
978d89b find_package: rename NoModule to UseFindModules
Remove dependency on /Developer/Headers/FlatCarbon when creating SLAs for DMG images.
Instead, of adding those .r files on the command line, include the necessary .r files
from the generated .r file.
Define variable CMAKE_FIND_PACKAGE_WARN_NO_MODULE for use by a project
that wants to use an explicit mode in every call to find_package in
order to generate more specific failure messages. Word the warning
using the new CONFIG and MODULE mode keywords when the minimum required
version of CMake is new enough to have them. Otherwise word the warning
using the old NO_MODULE mode keyword.
Inspired-by: Alex Neundorf <neundorf@kde.org>
Explain exactly why CMake is looking for a package configuration file
and who is expected to provide what:
CMake Error at CMakeLists.txt:7 (find_package):
By not providing "Find<pkg>.cmake" in CMAKE_MODULE_PATH the caller
has asked CMake to find a package configuration file provided by
"<pkg>", but CMake did not find one.
Could not find a package configuration file provided by "<pkg>"
with any of the names:
<pkg>Config.cmake
<pkg>-config.cmake
Add the installation prefix of "<pkg>" to CMAKE_PREFIX_PATH or
set "<pkg>_DIR" to a directory containing one of the above files.
If "<pkg>" provides separate development package or SDK be sure
it has been installed.
The first paragraph explains how CMake is interpreting the intention of
the caller. This puts the blame or credit at the call site in the
project code where it belongs both when it is a bug and when it is
intentional. It can be dropped in NO_MODULE mode.
Suggested-by: Brad King <brad.king@kitware.com>
In commit 41c2895b (Added version support to Config mode of find_package
command, 2008-01-28) the error message was computed but was not
reported. Add the SetError call to report it.
The purpose of the TargetType enumeration was overloaded for install
type because install rules were once recorded as targets. Factor the
install types out into their own enumeration.
This concerns all variables common to all CPack generators.
Variables mainly used and/or set in CPack.cmake are documented
therein. C++ built-in variables are documented in
cmCPackDocumentVariables.cxx.
The confluence of the ninja-generator and target-include-directories
branches conspired to produce a nice little compiler error when
they were both merged into 'next'...
Yay for Continuous dashboards!
For strict backwards compatibility only. This should be unnecessary at
this point, but introducing a policy to deprecate it properly is a
whole different topic branch...
Eliminate callers of cmMakefile::GetIncludeDirectories.
All callers of GetIncludeDirectories should go through the local generator
object.
Only the local generator calls cmTarget::GetIncludeDirectories directly.
35c48e1 Check*.cmake: Expand imported targets in CMAKE_REQUIRED_LIBRARIES
61cb4ea bootstrap: move while() and endwhile() into the bootstrap build
c9f2886 -don't pull in CheckTypeSize.cmake from the cmake which is being built
628f365 -remove trailing whitespace
Generally these are only required in build statements, as Ninja wants
to be able to chop paths up. But it doesn't hurt to also try to use
them in command line arguments.
This did not work because find_library() did only treat the given name as
complete filename if is matched "PREFIX.*SUFFIX":
find_library(MYLIB libfoo.so.2)
Now it is also taken as a whole if the name matches "PREFIX.*SUFFIX\..*".
If a variable exists called CMAKE_PROJECT_<projectName>_INCLUDE,
the file pointed to by that variable will be included as the last step
of the project command.
For Visual Studio using the Preprocessor Define _SBCS. This behavior
is similar to the way that _UNICODE and _MBCS work already.
Added tests to confirm this behavior.
Append a random number to the "cmTryCompileExec" file name to avoid
rapid creation and deletion of the same executable file name. Some
filesystems lock executable files when they are created and cause
subsequent try-compile tests to fail arbitrarily. Use a different
name each time to avoid conflict.
Even if there are no lines covered in the file the gcov coverage report still
contains valueable information, the amount of uncovered lines and which exactly
they are. Set 'Covered="true"' for files we have a gcov report for even if they
have no lines covered. Otherwise CDash will neither show the uncovered line
count nor the detailed coverage report for this file.
When CTEST_EXTRA_COVERAGE_GLOB was used to collect otherwise uncovered files
'Covered="true"' was unconditionally set, so this can't be worse here.
d4b77eb Avoid discovering system infos for documentation. Adding some path is enough.
9002f73 Fix non existent std::string::clear on VS6
02ccb32 Create getDocumentedModulesListInDir which may be used in other context.
24fbc28 Add missing section markup for CPackComponent
bafd8a9 Example of builtin variable documentation (i.e. only used in C++ source code).
543f1ad Make the load of script documentation more efficient and dynamic.
cdbd1a9 Fix another compiler warning due to a typo
52c53de Really avoid compiler warning about unused vars
37f90ed Calm down compiler warning about unused var
7c82b7f Fix potential bad memory access, thanks to Eike
62b589b Suppress unused var, beautify code, avoid 1 extra newline.
751713f Update bash completion file in order to handle new CPack doc options.
1629615 CPack Documentation extraction from CMake script begins to work
83e34dd Implement simple CMake script comment markup language.
c6a0169 CPack begin the implementation of --help-command* and --help-variables*
CPack help will be searched in any CPack*.cmake file located
near to CPack.cmake file. The script files is parsed iff
the first line begin with ##section. Moreover the documentation
section name is specified on the remaining part of the line
minus the space immediately following ##section.
OpenBSD shared library names end in a ".#.#" version number suffix.
Teach cmComputeLinkInformation to tolerate the extra suffix after
the normal library name suffixes when parsing library names.
5d18851 CPackArchive restore default behavior and provide new variable.
3cab24a CPack Add top level directory in component install for Archive Generators
When configuring or generating the 'ng' of the end of the second line
is not cleared. This patch fixes this.
The problem was introduced by commit fd632195 (ccmake: Align 'g' and 'q'
key instructions, 2011-01-07) which adjusted the length of lines that
need clearing.
The approach taken by commit 8704525f (Reject directory names containing
'=', 2011-01-14) was perhaps too heavy-handed for avoiding the obscure
cases when '=' in the path fails due to limitations of Make syntax.
Only two CMake tests:
LinkDirectory
OutOfSource
fail when the path contains '=' and they cover obscure cases. Instead
of rejecting such paths outright just warn when the problem may occur.
An implementation ;-separated list parsing was added by commit a1f976ce
(VS: Add support for three new project properties, 2011-11-23) and again
by commit 9e01aefd (VS: Add support for WinRT project properties,
2012-02-03). Refactor both instances to use ExpandListArgument.
VS_WINRT_EXTENSIONS: Boolean property that correspond to "Enable
Tailored Features" in Visual Studio 11 IDE.
VS_WINRT_REFERENCES: Semicolon-delimited list of *.winmd references to
add to the project, which creates a new <ItemGroup>.
CPACK_COMPONENT_INCLUDE_TOPLEVEL_DIRECTORY should be set by the user
in order to get the toplevel directory included in the archive
whenever a componentized archive is requested. This solves bug #12129
and keeps fully backward compatible behavior.
CMake doesn't find Visual C++ Express and uses "NMake Makefiles"
generator by default when one calls cmake WITHOUT using the -G options.
Teach CMake to find VC Express to use it as the default generator just
like the commercial versions.
Consider the case motivating commit e01cce28 (Allow add_dependencies()
on imported targets, 2010-11-19). An imported target references a file
generated at build time by a custom target on which it depends. Had the
file been built directly using add_library or add_executable its target
name would have been visible globally. Therefore the imported target
representing the file should be globally visible also.
Teach the IMPORTED signature of add_(executable|library) to accept a new
"GLOBAL" option to make the imported target visible globally.
- Enhance extract doc parser. Seems robust now. The legacy
module documentation parser works as before ignoring
the new markup.
- Proof of concept for CPack (generic), CPack RPM and CPack Deb
generator for macro and variables.
Try cpack --help-command and cpack --help-variables
The language is very simple. It use ##<keyword> special comment
which opens a structured documentation block and ##end closes it.
This may be used to extract documentation for macro as 'command'
and 'variables' such that cpack --help-command and --help-variable
does parse builtin modules files (CPack.cmake, CPackComponent.cmake,
...) in order to extract the corresponding doc.
This modifications set tries to keep the unified doc for cmake/ctest/cpack
while introducing tool specific documentation separated.
Some documentation sections for CMake do not fit well to CPack.
0df1942 Detect SGI MIPSpro compiler version with its id
a5e892c Document compiler version macro formats used for detection
d7c6f41 Detect HP compiler version with its id
3dd9fa9 Detect SunPro compiler version with its id
c198730 Detect Watcom compiler version with its id
5899b98 Detect Clang compiler version with its id
b8cfa65 Detect PGI compiler version with its id
6dae666 Detect IBM XL compiler version with its id
4080d55 Detect Borland compiler version with its id
2cc205a Detect Intel compiler version with its id (#11937)
a6d83cc Detect MSVC compiler version with its id
a662855 Detect GNU compiler version with its id (#6251)
fa7141f Add framework to detect compiler version with its id (#12408)
Since commit 183b9509 (Follow all dependencies of shared library private
dependencies, 2011-12-14) we honor LINK_INTERFACE_LIBRARIES when
following dependent shared libraries. The link interface properties may
form a cycle if set incorrectly by a project. Furthermore, the property
LINK_DEPENDENT_LIBRARIES may form a cycle if set incorrectly by hand
(though CMake should never generate one). In either case, do not follow
the cycle forever when following the dependent shared library closure.
We only need to add dependency edges to the constraint graph once.
Add "LinkInterfaceLoop" test to cover this case.
This wasn't necessary for TAR-like (TGZ, TBZ2, etc...) archive
because for those the size was 0. Either there is an error in
upstream libarchive concerning the size or we should not rely
on size of the entry for adding content.
6c611c6 libarchive: Restore CMake 2.6.3 as minimum version
2f5b677 libarchive: Update README-CMake.txt for new snapshot
156cb3b Merge branch 'libarchive-upstream' into update-libarchive
fd42bf1 libarchive: Set .gitattributes to allow trailing whitespace
4f4fe6e libarchive 3.0.2-r4051 (reduced)
65b6e19 libarchive: Avoid bogus conversion warning from PGI compiler
9ccaeb1 libarchive: Suppress PathScale compiler warnings
2309438 libarchive: Rename isoent_rr_move_dir parameter isoent => curent
b6ca96e libarchive: Include linux/types.h before linux/fiemap.h
f293b73 libarchive: Define _XOPEN_SOURCE=500 on HP-UX
6781a09 libarchive: Cleanup after ZLIB_WINAPI check
f15d757 libarchive: Remove hard-coded build configuration
3a9f449 libarchive: Use Apple copyfile.h API only if available
6af6b96 libarchive: Do not use MNT_NOATIME if not defined
02d5e40 libarchive: Check for 'struct statvfs' member 'f_iosize'
8b7ee30 libarchive: Do not use ST_NOATIME if not defined
...
Instead of enabling interrupt only when a progress or message callback is called, add a new callback specifically for
interrupt. This new callback is called from GetFatalErrorOccured() so cmake-gui can immediately report interrupt status
instead of calling queuing a call to cmSystemTools::SetFatalErrorOccured() and waiting for the progress or message
callback to be called to process that queued call.
This adds a test that uses two project commands in the same CMakeLists.txt
file. It also adds a fix so that cmake --build will work in that case.
The fix sets the name of the last project command in the top level
CMakeLists.txt in the cache variable CMAKE_PROJECT_NAME. This variable
is used by cmake --build to find the project name.
Now also CMAKE_ASM_INCLUDE_PATH is written into
CMakeDirectoryInformation.cmake, which is necessary to make
the dependency scanning for included files work.
Alex
Fix a crash which occurs when SystemTools::GetPath attempts to process
an empty environment variable.
Author: Vladimir Panteleev <vladimir@thecybershadow.net>
QKeySequence::Quit does not work on all platforms, and since it
translates to Ctrl+Q on all platforms where it does work, Ctrl+Q was
hardcoded instead.
Fix the regex meant to match errors of the form:
C:\some\dir\source.cpp(17): catastrophic error: could not open source file "some_header.h"
to make the space between ')' and ':' optional.
The default OS X 10.4 linker incorrectly searches for dependencies of
linked shared libraries only under the -isysroot location. It fails to
find dependencies of linked shared libraries in cases such as the
ExportImport test. It produces errors like:
/usr/libexec/gcc/i686-apple-darwin8/4.0.1/ld: warning can't open dynamic library:
libtestLib3Imp.dylib
referenced from: /.../ExportImport/Root/lib/libtestLib3lib.1.2.dylib
(checking for undefined symbols may be affected) (No such file or directory, errno = 2)
/usr/libexec/gcc/i686-apple-darwin8/4.0.1/ld: Undefined symbols: _testLib3Imp
referenced from libtestLib3lib expected to be defined in
libtestLib3Imp.dylib
or with CMAKE_SKIP_RPATH off to enable install_name in the Export side:
/usr/libexec/gcc/i686-apple-darwin8/4.0.1/ld: warning can't open dynamic library:
/Developer/SDKs/MacOSX10.4u.sdk/.../ExportImport/Export/impl/libtestLib3Imp.dylib
referenced from: /.../ExportImport/Export/libtestLib3lib.1.2.dylib
(checking for undefined symbols may be affected) (No such file or directory, errno = 2)
/usr/libexec/gcc/i686-apple-darwin8/4.0.1/ld: Undefined symbols:_testLib3Imp
referenced from libtestLib3lib expected to be defined in
/.../ExportImport/Export/impl/libtestLib3Imp.dylib
Note how "/Developer/SDKs/MacOSX10.4u.sdk" is prepended to the dependent
library path.
Commit 2cff26fa (Support linking to shared libs with dependent libs,
2008-01-31) and commit 82fcaebe (Pass dependent library search path to
linker on some platforms, 2008-02-01) worked around the problem by
defining platform variable CMAKE_LINK_DEPENDENT_LIBRARY_FILES. It tells
CMake to link to dependent libraries explicitly by their path thus
telling the linker where to find them.
Unfortunately the workaround had the side effect of linking dependent
libraries and defeats most benefits of LINK_INTERFACE_LIBRARIES.
Fortunately OS X 10.5 and above do not need to find transitive
dependencies at all so we can avoid the workaround on Modern OS X.
In cmComputeLinkDepends we compute the transitive closure of private
shared library dependencies. When a shared library is added to this
closure we must follow all of its dependencies whether they are private
or public. Previously we only followed the private dependencies. Fix
the implementation to follow the public dependencies too. Also extend
the ExportImport test to cover this case.
Adds "include progress.make" to build.make, just like for
add_executable and add_library targets. The code was copied
from cmMakefileTargetGenerator::WriteCommonCodeRules().
Commit 1be4b6f4 (Order VS local generator Version ivar values
consistently, 2011-11-10) fixed the Version ivar of the VS 10 local
generator by setting it correctly to 10 instead of leaving it at 7.
This broke generation of .vfproj files for the Intel Fortran plugin to
VS 10 by mixing VS 9 and 10 formats together in one file. Teach the
local generator to pretend the Version is 9 for Intel Fortran targets.
automoc now defaults to strict mode, also with Qt4, i.e. it behaves as
the documentation says by default. I also inverted the switch
CMAKE_AUTOMOC_STRICT_MODE to CMAKE_AUTOMOC_RELAXED_MODE.
Docs and test adapted accordingly.
Alex
Generate the rerun dependency file for the top-level project() and each
subdirectory project() into the corresponding build directory. Do not
clobber them all with the one for the last subproject. This mistake was
left from when the Xcode generator did not produce subprojects.
2d11951 Merge branch 'master' into AutomocIncludedDotMocFileHandling
1eca18f automoc: add documentation for CMAKE_AUTOMOC_STRICT_MODE
bc278ce automoc: fix line length
62e223e automoc: add variable CMAKE_AUTOMOC_STRICT_MODE, to enable strict parsing
40c5167 automoc: accept even more .moc files in non-strict mode
c207f5d automoc: also accept other files when .moc is included in non-strict mode
9c0df72 automoc: add a StrictParseCppFile(), which is only qmake-compatible
174bf35 automoc: move the code for finding headers into separate function
8507eae automoc: fix handling of included _p.moc files
7ada172 automoc: some more linebreaks for the warnings for better readability
3b93e26 automoc: add extra check whether the header contains Q_PRIVATE_SLOT
4745715 Add a test case for the use of Q_PRIVATE_SLOT.
bde4edb automoc: add special handling for including basename_p.moc, with test
74ab0f6 automoc: move some code from the big parsing loop into separate functions
bc7560e automoc: add test for including a moc_abc_p.cpp file
30fd8e6 automoc: add test for including the moc file from another header
...
Teach CMakePlatformId.h to construct an "INFO:compiler_version[]" string
literal from macros COMPILER_VERSION_(MAJOR|MINOR|PATCH|TWEAK) to be
defined in CMake(C|CXX)CompilerId.(c|cpp) for each compiler. Provide
conversion macros DEC() and HEX() to decode decimal or hex digits from
integer values. Parse the version out of the compiler id binary along
with the other INFO values already present.
Store the result in variable CMAKE_<LANG>_COMPILER_VERSION in the format
"major[.minor[.patch[.tweak]]]". Save the value persistently in
CMake(C|CXX)Compiler.cmake in the build tree. Document the variable for
internal use since we do not set it everywhere yet.
Report the compiler version on the compiler id result line e.g.
The C compiler identification is GNU 4.5.2
Report CMAKE_(C|CXX)_COMPILER_(ID|VERSION) in SystemInformation test.
ae62a1c Test CMAKE_GNUtoMS option in ExportImport on MinGW and MSys
afb00fe Add CMAKE_GNUtoMS option to convert GNU .dll.a to MS .lib
61e8629 Factor makefile generator link rule lookup into helper function
a603250 Load platform files that need to know the ABI when possible
ecd8414 Fortran: Detect pointer size in gfortran on MinGW
Teach the Windows-GNU.cmake platform file to look for Visual Studio
tools matching the target ABI. Add an extra step to the link command
for shared libraries and executables that export symbols and on which a
new GNUtoMS property is set (initialized by the CMAKE_GNUtoMS option).
Tell the GNU linker to output a module definition (.def) file listing
exported symbols in addition to the GNU-format import library (.dll.a).
Pass the .def file to the MS "lib" tool to construct a MS-format DLL
import library (.lib).
Teach the install(TARGETS) command to install the MS import library next
to the GNU one. Teach the install(EXPORT) and export() command to set
the IMPORTED_IMPLIB property pointing at the import library to use the
import library matching the tools in the importing project.
Load platform files named in CMAKE_<lang>_ABI_FILES for each language
once the ABI sizeof(void*) is known. During the first configuration
this is after the test for working compiler and ABI detection checks.
During later configurations the ABI information is immediately available
because it has been saved in CMake<lang>Compiler.cmake.
ParseCppFile() is the one which is automoc4/KDE4-compatible, and which
becomes a bit crowded. By separating these two it is easier to ensure
that the strict one doesn't get broken accidentially.
Alex
Since the export() command needs to know the final location of a target
in the build tree we cannot allow properties affecting the location or
name of a target file to be set after the target is passed to export().
Fix a violation of this rule in the SimpleInstall test.
ac2e45d Provide std::ios_base typedef on GCC < 3
28c46ca cmNewLineStyle: Use cmStandardIncludes.h
75e83e9 cmNewLineStyle: Remove trailing comma in enum
be6502c bootstrap: Include cmNewLineStyle in build
a087490 Add NEWLINE_STYLE option to configure_file (#3957)
This ensures that stl types are compiled consistently with
the reset of CMake. Otherwise one may get errors like
Undefined symbol: .cmNewLineStyle::ReadFromArguments(
const std::vector<std::_LFS_ON::basic_string ...)
due to inconsistent large file support definitions.
This is again for KDE4 compatiblity. If foo.moc is included, in general
moc should run on foo.cpp. Usually this can't cause problems.
It can only cause problems if moc must run on the header, and the resulting
file must be included in the cpp file, which is the case with the
Q_PRIVATE_SLOT macro.
This makes the test added by Stephen pass.
Alex
VS_GLOBAL_PROJECT_TYPES: A string containing UUIDs to embed in the
Visual Studio project file under <ProjectTypes>.
VS_GLOBAL_KEYWORD: Allows specification of a keyword like "ManagedCProj"
instead of the default "Win32Proj", under <Keyword>
VS_DOTNET_REFERENCES: Semicolon-delimited list of .NET references to add
to the project, which creates a new <ItemGroup>.
Remove extra parens in test for not handling LINK_INTERFACE_LIBRARIES.
Remove redundant test for equality with ProcessingPrivateInterface
subsumed by test for inequality with ProcessingPublicInterface.
982b766 Eclipse: use new variable CMAKE_ECLIPSE_GENERATE_SOURCE_PROJECT
1110e45 Eclipse: create links to subprojects also in the source-project (#12579)
Typical <package>Config.cmake files for find_package() rely only on the
files generated by install(EXPORT). They might be wrong, for whatever
reasons, like people manually deleted files, projects were packaged
wrong by distributions, whatever. To protect against this, add checks
that the file locations we are importing actually exist on disk.
Alex
Up to 100 completion strings for the names of added variables
are saved in the settings, so it will remember the variables
you are usually adding.
It also ensures that CMAKE_INSTALL_PREFIX is always there, since
this is maybe the one which is set most often.
Alex
Previously ECLIPSE_CDT4_GENERATE_SOURCE_PROJECT was used, but the
new name CMAKE_ECLIPSE_GENERATE_SOURCE_PROJECT is more in line with
the general naming conventions in cmake, and, more importantly IMO,
in cmake-gui it now appears right next to the other eclipse-related
variables, which all start with CMAKE_ECLIPSE_.
A warning is printed if the old variable is TRUE and the new one isn't,
so users should notice that they have to enable the new one.
Alex
Similar fix to commit d093abef for the Makefile generators. Prevents
premature exit from sequence of commands. Even when no errors occur,
the previous construct without "call " was exiting the sequence before
executing the full set of commands...
Add a cast to lines converting "uint64_t" to "unsigned int" that are
known safe due to use of modulus with a small integer. This avoids
compiler warnings such as
conversion from 'cm_sha2_uint64_t' to 'unsigned int',
possible loss of data
from MSVC.
-enable the KDE4-compatiblity mode only when using Qt4
-always (except in the KDE4 compat mode) error out if a cpp-file
contains "Q_OBJECT", but does not include filename.moc
Alex
Define an abstract API around the backend hash algorithm. Expose
ifstream errors to HashFile callers. Always try opening the file.
Succeed only if the end of file is reached without error.
537020f Tests: Nudge MFC test to pass on VS 6 dashboards (#11213)
51f442e VS11: Update InstallRequiredSystemLibraries.cmake for VS11 (#11213)
d85ab7a Tests: Add environment logging to the MFC test (#11213)
011694c VS10: Use expected values for UseOfMfc (#11213)
a2e6d24 Tests: Fix MFC test to work with VS 10 and later (#11213)
Since the parent commit the local generator Version ivar may be
compared for ordering. Convert comparisons:
"==VS10" becomes ">=VS10"
"!=VS10" becomes "< VS10"
to support an explicit enumeration value for VS11 with no change
in behavior.
Move the Version member to the top cmLocalVisualStudioGenerator class
and set it consistently for instances created by all the global
generator versions. Use an enumeration type with values scaled by a
factor of 10 so we can handle VS 7.1 without out-of-order numbers.
VS 7.1 support for SuppressStartupBanner was broken by commit 25116a3c
(Fix CMAKE_VERBOSE_MAKEFILE for VS10 vcxproj files, 2011-10-11) because
it assumed comparison of VS version numbers works. Now it does.
Handing th std::string instead the char* to the find()
reduces the time from 17 to 15 seconds (for a 1000 times loop of a
relatively small file), which is around 10 percent.
Alex
There are multiple/many places in KDE where the developer includes
moc_foo.cpp, and expects moc to run on foo.cpp, instead of foo.h.
He should use foo.moc, but right now this is handled by automoc4,
so we must stay compatible. So support this too, but warn about
it.
Alex
Use expected values for the UseOfMfc xml element in
VS 10 .vcxproj files.
CMAKE_MFC_FLAG=1 maps to "Static"
CMAKE_MFC_FLAG=2 maps to "Dynamic"
all other values map to "false"
Thanks to Randy Schott and McBen for their patches which
served as inspiration and motivation for getting this done.
See also http://public.kitware.com/Bug/view.php?id=11224
The Watcom WMake tool has trouble running commands in paths that have
parentheses. We already convert most commands to a shortpath for Watcom
if the path contains a space, but the use of $(CMAKE_COMMAND) hides the
true path from that conversion. Factor the shortpath conversion code
out into a new ConvertShellCommand method. Teach it to convert paths
that contain parentheses as well as spaces. Use the new method to
convert the value of $(CMAKE_COMMAND) and other helper variables.
Teach cmComputeLinkInformation to generate the "-framework" option as a
separate link item preceding the actual framework name. Then escape the
framework name to pass as an argument through a shell. This fixes the
link line for frameworks with spaces in the name.
The build system generators that call cli.GetItems() and generate the
final list of items on the link line already handle escaping correctly
for items that are paths. However, for raw link items like "-lfoo" they
just pass through to the command line verbatim. This is incorrect. The
generators should escape these items too. Unfortunately we cannot fix
that without introducing a new CMake Policy because projects may already
be passing raw link flags with their own escapes to work around this
bug. Therefore we punt on this bug for now and go with the above fix.
Eclipse doesn't handle this case well. When doing out-of-source builds
we create a linked resource which points to CMAKE_SOURCE_DIR, so the
user can browse the source dir in Eclipse. This is not possible
when the build dir is a subdir of the source dir.
Alex
CommandLineArguments.cxx:
remark #181: argument is incompatible with corresponding format
string conversion
SystemInformation.cxx:
remark #193: zero used for undefined preprocessing identifier "_WIN32"
warning #177: variable "Regebx" was declared but never referenced
SystemTools.cxx(375):
remark #444: destructor for base class "std::vector<char*>" is not virtual
class kwsysDeletingCharVector : private kwsys_stl::vector<char*>
Author: Hans Johnson <hans-johnson@uiowa.edu>
Change-Id: Ibc899c3ba14990158ef7bbabace4b435b22495c3
This commit adds a new target property AUTOMOC_MOC_OPTIONS, which
can be set to add extra options for the moc invocations done via automoc.
This is equivalent to the OPTIONS parameter in the qt4_wrap_cpp() macro.
Alex
Set the working directory for make targets which are associated
to virtual folders, otherwise Eclipse simply runs make from the
current working directory (where Eclipse has been started), and
where probably not the correct makefile is located.
Alex
Judging from the questions I see on the #cmake IRC channel this is one
of the most common pitfalls for people coming from other build systems,
especially plain Makefiles. Finally put this into the documentation to
stop people getting fooled into using this.
Text by Brad King.
Provide the ability to configure CTest with settings different from the ones
available in the source tree by checking first if CTestConfig.cmake
exists in the build tree.
The motivation is to allow build system checking out external project to
test and/or package them and submit the associated results to a different
dashboard than the one specified (or not) in the source of the external
project.
For example, the build system of Slicer can checkout, build, test
and package what I will call "extensions". These extensions can be developed
by third parties who can test and submit to their own dashboard / project.
When checked out by Slicer build system, the default dashboard can now be
overwritten by adding a custom CTestConfig.cmake to the build directory.
And if not overwritten, it would avoid to create CTestConfig.cmake within
the source checkout of the extension.
Important when calling ctest commands in a loop from a script.
Each time Populate gets called, it uses the current definition
of the variable. Without the clear, it was accumulating additional
identical values each time through the loop.
66bd543 Eclipse: fix#12417, don't create wrong src pathentries
70de8bd Eclipse: detect number of CPUs, set CMAKE_ECLIPSE_MAKE_ARGUMENTS accordigly
117f2b8 Eclipse: add Build and Clean targets to targets
c3f30bd Eclipse: move code for generating links to targets into separate function
cef6bd9 Eclipse: move code for generating links to projects into separate function
b6d4de7 Eclipse: add virtual folder for each target
5e8e9ad automoc: always run moc on the cpp file if there is a foo.moc included
ea8ac9f Add copyright notices
56aa6ff automoc:run moc on the header if the source file contains include "foo.moc"
In the log entry, the newline is missing. The output without the newline
character is a bit strange, like
SetCTestConfigurationFromCMakeVariable:MemoryCheckCommand:CTEST_MEMORYCHECK_COMMANDSetCTestConfiguration:MemoryCheckCommand:/usr/bin/valgrind
Instead of
SetCTestConfigurationFromCMakeVariable:MemoryCheckCommand:CTEST_MEMORYCHECK_COMMAND
SetCTestConfiguration:MemoryCheckCommand:/usr/bin/valgrind
This patch changes this to add a newline.
Signed-off-by: Bernhard Walle <walle@corscience.de>
Define variable CMAKE_LINK_INTERFACE_LIBRARIES to initialize the
value of this property when a target is created. This allows authors
to write
set(CMAKE_LINK_INTERFACE_LIBRARIES "")
to disable transitive linking to implementation dependencies of shared
libraries on platforms where it is possible.
They were miss-aligned with the 'enter' key instruction.
Before:
----
Press [enter] to edit option CMake Version 2.8.3.20110107-g4b05a-dirty
Press [c] to configure
Press [h] for help Press [q] to quit without generating
----
After:
----
Press [enter] to edit option CMake Version 2.8.3.20110107-g4b05a-dirty
Press [c] to configure
Press [h] for help Press [q] to quit without generating
----
Actually the Eclipse generator now does not create any CDT_SOURCE
pathentries anymore, since I was not able to find out what they are
good for, not even by asking on the cdt-dev mailing list.
So, at least the warning from eclipse about bad pathentries are gone
this way, and I didn't see anything which was not working anymore.
Let's see whether we can find out what they are good for.
Alex
With this commit the virtual folder for the targets now
have "Build" and "Clean" targets associated to them, so you can
build and clean per-target now in the project explorer.
Alex
This makes automoc behaves as the documentation says.
If there is a #include "foo.moc" in the source file, moc
will be executed on foo.cpp.
Before it was also executed on foo.cpp, but only if foo.cpp
contained a Q_OBJECT macro, otherwise moc was executed on
foo.h. This was confusing, and this change also shouldn't break
anything, since the headers are moc'ed anyway if they contain
a Q_OBJECT macro.
Alex
This fixes#12533.
Before automoc did not check the header if the source file contained a
statement, now it does.
Additionally, moc is now only run on explicitely listed headers which
contain a Q_OBJECT macro.
Alex
COVERAGE_EXTRA_FLAGS is a space separated value of extra flags
that will be passed to gcov when ctest's coverage handler invokes
gcov to do coverage analysis.
Map to CoverageExtraFlags in the CTest ini file. Use default value
of "-l" to match the coverage handler's earlier behavior from ctest
2.8.4 and earlier. The fix for related issue #11717 had added a " -p"
which was the cause of both #12415 and #12490. Here, we revert that
change to the default value, so -p is no longer there by default.
The people that care to add -p may do so in their own build trees
by appending " -p" to the new cache variable COVERAGE_EXTRA_FLAGS.
For each target a virtual folder is created, which contains
one virtual folder for each sourcegroup, which contain
links to the actual source files (#12294, #12223)
Alex
dcd2459 Eclipse: better message when Eclipse version could not be determined
b4b2fc3 Eclipse: don't create VirtualFolders if not supported
5b200e3 Detect whether the current Eclipse version supports VirtualFolders
4974ec9 Eclipse generator: detect Eclipse version
32f8437 Fix line-too-long style violations
029ab31 Constify XCode generator getters to match cmGlobalGenerator
fec4b63 Fix configuration-dependent flag lookup in cmLocalGenerator::GetTargetFlags
557956f Introduce a cmGlobalGenerator::ResolveLanguageCompiler function
5b114c9 Introduce a cmLocalGenerator::ConvertToIncludeReference function
903d914 Make cmLocalGenerator::ConvertToLinkReference virtual
8a0eb78 Constify many getters of cmGlobalGenerator.
4532d36 Add const versions of some getters.
3db2973 Refactor TargetTypeNames.
Commit 8a0eb78f (Constify many getters of cmGlobalGenerator, 2011-03-26)
added const qualifiers to many cmGlobalGenerator methods but left the
resulting lines beyond our style's limit of 79 characters.
Commit 8a0eb78f (Constify many getters of cmGlobalGenerator, 2011-03-26)
added const qualifiers to many cmGlobalGenerator methods. Fix the
signature of the virtual function overrides in cmGlobalXCodeGenerator to
match.
Files for the ASM language are those assembler files which are processed
by the C/CXX compiler, and they may contain preprocessor directives, so
run the C dependency scanner also on them.
Alex
Brad King
Peter Kuemmel
Kitware Robot
Daniel R. Gomez
David Cole
Stephen Kelly
Fraser Hutchison
Eric NOULARD
Peter Collingbourne
Brian Helba
Alex Neundorf
Jan Schaffmeister
Bill Hoffman
Nicolas Despres
Minmin Gong
Joseph Snyder
Modestas Vainius
Clinton Stimpson
Jim Hague
Leonid Yurchenko
Rolf Eike Beer
Sean McBride
Alexandru Ciobanu
Konstantin Tokarev
Yury G. Kudryashov
Bjoern Ricks
Aaron C. Meadows
Eugene Golushkov
Daniel Nelson
Raphael Kubo da Costa
Johan Fänge
Valat Sébastien
Aaron Ten Clay
Robert Dailey
Rolf Eike Beer
Jean-Christophe Fillion-Robin
Bernhard Walle
Johan Bjork
Niels Dekker