Since commit v3.0.0-rc1~335^2~1 (eclipse: Add natures for Eclipse based
on enabled languages, 2013-08-29) CXX projects got only "ccnature", but
Eclipse itself also adds "cnature" when creating C++ projects. Fix this
by adding both for CXX projects.
65b81da4 cmVariableWatch: Use the cmDeleteAll algorithm with for_each.
30d2de9a cmGeneratorExpressionEvaluator: Replace own algorithm with cmDeleteAll.
4a6e795b Use the cmDeleteAll algorithm instead of trivial raw loops.
abb4a678 Add a generic algorithm for deleting items in a container.
The sweeping pattern change in commit 238dd2fb (Use insert instead of a
loop in some cases, 2014-11-22) accidentally changed the iterator range
used on the queue in cmCTestBuildHandler::ProcessBuffer. Instead of
ending at the iterator positioned at the next newline to populate
CurrentProcessingLine, it was changed to go to the end of the queue.
This causes the line to contain newlines and possibly be cut off in the
middle of a line. Fix this regression by restoring use of the proper
end-of-line position.
Case where CPACK_CMAKE_GENERATOR value is non existent or
or contains multiple words that were not quoted was not
handled and produced a segmentation fault.
Specialize for std::map types to delete the second element from
the iterator. This is not quite general enough that it can
be used everywhere, because CMake inherits from std::map and
creates typedefs with custom comparison functors etc, which
can not use this algorithm.
Commit v3.1.0-rc1~297^2~5 (cmTarget: Drop 'head' argument from
GetSourceFiles, 2014-07-10) exposed a dormant bug in source file computation,
causing the test case to regress. After that commit, the source file
computation and caching finds an existing container of source files. Prior to
that patch, the GetSourceFiles method was called with either a null pointer
for the head cmTarget, or it was called with the this pointer. The
processSources method is eventually called, which normalizes the difference
between the null pointer and the this pointer for the head target. However,
the cache key depends on the actual pre-normalized pointer. The change in
that commit caused the entry to be found in the cache where it was not before,
which resulted in incorrect behavior.
Prior to that commit, the test case also fails if the GetSourceFiles overload
taking a vector<cmSourceFile*> is changed to normalize the head target at
the beginning of the method:
cmTarget const* head = head_ ? head_ : this;
Such a construct was correctly used in other locations where similar caching
was in place, before being removed in commit v3.1.0-rc1~310^2~25 (cmTarget:
Remove 'head' argument from GetLinkInformation, 2014-06-12), but is not
neccessary anymore.
Commit v3.1.0-rc1~674^2~2 (cmTarget: Cache the cmSourceFiles in
GetSourceFiles., 2014-04-05) introduced the caching, but fails the test case
for an unrelated reason. That unrelated error was introduced in
commit v3.1.0-rc1~688^2~5 (cmTarget: Allow any generator expression in
SOURCES property., 2014-03-18) and fixed in
commit v3.1.0-rc1~561^2~1 (cmTarget: Fix listing of source files at
configure-time., 2014-04-13).
All commits which fail the test case in the testable way do so when such a
cached version of the source files is found and returned at generate
time. In the test case, the cached content is populated at configure-time
through the use of the deprecated LOCATION property with CMP0026 OLD. The
cached content is an empty container for the bar target in the test case,
because its source file 'foo.cpp.o' is not known until generate-time. That
means that no source files are available to compute the link language and
the reported error is issued.
The actual problem is that the SourceFilesMap should be cleared after
configure time by cmTarget::ClearLinkMaps. Clear it there now.
55a73e6b Use the cmJoin algorithm where possible.
8dc8d756 cmStandardIncludes: Add a join algorithm for string containers.
b5813cee cmInstallCommand: Remove unused variable.
4035ef78 cmake -E tar: error out on multiple compression formats
d811d238 cmSystemTools: use an enumeration for compression formats
df16dcfb cmake -E tar: add support for .xz files with 'J'
b0a5d393 cmake -E tar: clean up flag documentation
This commit fixes a segmentation fault I encountered when my
Coverage.xml referenced a system file, eg /usr/lib/python/foo.py.
Similar to other CMake coverage parsers, this one now ignores any
files it finds that are not located within this project's source
or binary directories.
3660d063 cmTarget: Use insert instead of std::copy.
5c28495f Help: Remove documented restriction on template use.
ac3d3829 Help: Remove documented restriction on find in conditions.
36b8de56 Help: Remove documented restriction on insert APIs.
6162c919 Use two-iterator std::set::insert where appropriate.
238dd2fb Use insert instead of a loop in some cases.
2f7ef7e3 Revert "Misc. fixes for the Oracle / Sun compiler."
4c69ec6f SolarisStudio: Use alternative standard library to build CMake.
The "." in the extension was dropped by commit v3.1.0-rc1~556^2~2
(cmSourceFile: Cache the isUiFile check, 2014-02-08) by mistake. This
caused the options to not be set.
This requires the input range to supply BidirectionalIterators, which
is not a problem for where it is currently useful to us. The alternative
would be to not invoke --last;, and instead create an output iterator
similar to std::ostream_iterator, but which puts the delimiter before
the item to output.
Case where CPACK_CMAKE_GENERATOR value is non existent or
or contains multiple words that were not quoted was not
handled and produced a segmentation fault.
When configured to use UTF-8 internally, add a UTF-8 BOM
to generated .sln files for Visual Studio to correctly
handle them.
Otherwise, some versions of Visual Studio will read them
as ANSI encoded files.
When uploading files greater 2GB a cast to 'int' overflows, leading to a
bad alloc when passed to new. Also avoid floating point arithmetic when
integer calculations will work as well.
Reported-by: Justin Borodinsky <justin.borodinsky@gmail.com>
07fc7b75 Tests: Test using objects from a language enabled in a subdirectory (#15325)
fdbfcfdf Ninja: Generate rules only for languages compiled in a target (#15325)
e2a489c7 Remove some temporary vectors for ExpandListArgument.
0f99feec cmGeneratorExpression: Remove unused header.
722f1a71 CTest: Expand a string directly into a container.
Refactoring in commit v3.1.0-rc1~688^2~2 (cmTarget: Compute languages
from object libraries on demand, 2014-03-18) taught cmTarget::GetLanguages
to (correctly) include the languages of object library sources. Previously
this was done only in cmTarget::ComputeLinkImplementationLanguages to
choose the linker language.
The Ninja generator writes out generic build rules for each language
compiled within a target using the rule variables defined in the
directory of the target. This only needs to be done for languages
actually compiled within the current target. Switch from using the
cmTarget::GetLanguages method to get the list of languages over to
using cmTarget::GetSourceFiles directly so we do not get the languages
in object libraries.
Strictly speaking this should make no difference because it is not safe
to use objects from a language not enabled in the directory containing
a target or else the link information for the language may not be
considered. However, in cases when no link information happens to be
needed for a language it was possible in CMake 3.0 and below to enable
a language only in a subdirectory providing an object library, and then
use the objects from a containing directory. The above change teaches
the Ninja generator to continue working in this case.
b189c599 Tests: Run CFBundleTest only with valid configuration
3a605693 Xcode: Call IsCFBundleOnApple to decide if bundle is being built
207b7af0 cmTarget: Use GetCFBundleDirectory within GetFullNameInternal
One piece of code has some ambiguous type deduction that seems to
resolve correctly for most compilers but not for the Oracle compiler.
Make it more explicit.
Narrow down the decision if a CFBundle is built to one place.
This is a preparation patch to add another target property
which, if set, will imply BUNDLE. Having only one function
which will have to look at both properties helps to keep code
clean.
Signed-off-by: Gregor Jasny <gjasny@googlemail.com>
Also add a 'CMAKE_ANDROID_API_MIN' variable to set the property
default. Teach the VS generator to write the MIN API value into
Nsight Tegra project files.
In cmCTestMemCheckHandler::PostProcessBoundsCheckerTest return early
if the output file name is empty. We already do this in the similar
cmCTestMemCheckHandler::AppendMemTesterOutput method.
When install(EXPORT) is given an absolute destination we cannot compute
the install prefix relative to the installed export file location.
Previously we disallowed installation of targets in such exports with a
relative destination, but did not enforce this for target property
values besides the location of the main target file. This could lead to
broken installations when the EXPORT is installed to an absolute path
but usage requirements are specified relative to the install prefix.
Since an EXPORT installed to an absolute destination cannot be relocated
we can just hard-code the value of CMAKE_INSTALL_PREFIX as the base for
relative paths. This will allow absolute install(EXPORT) destinations
to work with relative destinations for targets and usage requirements.
Extend the ExportImport test with a case covering this behavior.
A few pieces of code have some ambiguous type deduction that seems to
resolve correctly for most compilers but not for the Oracle compiler.
This makes those few instances more explicit.
In the unlikely event that someone has a billion+ scripts (or some
codepath returns negative numbers), we could overflow and make a pile of
errors a non-error. This change also allows us to use flags for the
error in the future rather than just "something went wrong".
We use cmGlobalGenerator::GetDirectoryContent to avoid repeating
directory listings. However, GetDirectoryContent loads content from
disk at most once. This breaks find_library calls that occur when disk
content has changed since preceding find_library calls.
Teach cmGlobalGenerator::GetDirectoryContent to save the directory
modification time when content is loaded and re-load content if it
changes.
Create a RunCMake.find_library test with a case covering this.
Given a rule of the form
out1 out2: dep1
out1 out2: dep2
Borland Make complains that there are multiple rules for "out1"
even though this works when there is only one output. Instead
generate
out1 out2: dep1 dep2
for Borland Make, but only when there are multiple outputs.
Convert the StringToInt helper into a StringToLong helper with a 'long'
result type. This will make the helper more useful to other callers
that want to use strtol.
While at it, also check errno after calling strtol in case the
conversion fails with a range error.
Because ctest reads in binary but writes in text mode, Windows' newline
transformation can be applied multiple times causing '\n' in the source
application to be written out as '\r\r\n' instead.
Fix the generated makefiles for custom commands with multiple outputs to
list all the outputs on the left hand side of the build rule. This is
much simpler and more reliable than the old multiple-output-pair
infrastructure.
The Xcode generator uses Makefiles under a run-script build-phase to
drive custom commands. Fix the generated makefiles for custom commands
with multiple outputs to list all the outputs on the left hand side of
the build rule. This is much simpler and more reliable than the old
multiple-output-pair infrastructure.
If a source file COMPILE_FLAGS option adds "-wd", the .vcxproj file
will have a DisableSpecificWarnings setting for the source file.
Add to the setting a reference to %(DisableSpecificWarnings) to
inherit any such flags set for the whole target.
Copy CMAKE_EXE_LINKER_FLAGS into the test project generated by
try_compile, just like we already copy CMAKE_<LANG>_FLAGS.
Add CMake Policy CMP0056 to activate this behavior in a compatible way,
but do not warn by default when the policy is not set since it will
affect all try_compile calls.
Extend the RunCMake.try_compile test with a case covering this behavior
for each policy setting.
When compiling the ABI detection test project, do not override
CMAKE_EXE_LINKER_FLAGS completely. The normally selected value of this
variable may influence how the link is done and may be needed to be
representative of how the calling project will be built. Instead pass a
variable that try_compile will reference as additional flags. Leave
this behavior of try_compile undocumented for now.
With PushScope and PopScope, keeping track of another bit of data for
each scope isn't easy. Instead, store it as another CMake variable so it
gets implicitly tracked along with everything else.
This works in a revert of commit
7d674b5f0b.
Provide options to fail without blocking or to block up to a timeout.
Provide options to specify the scope containing the lock so it can be
released automatically at the end of a function, file, or process.
Extend the RunCMake.file test with cases covering the file(LOCK) command
usage and error cases.
Add a VS_DEPLOYMENT_LOCATION source file property to specify where to
put files that are part of the package. For example:
set_property(SOURCE ${ASSET_FILES} PROPERTY VS_DEPLOYMENT_LOCATION "assets")
Without this, sources marked with VS_DEPLOYMENT_CONTENT cannot be
located properly.
Create properties VS_SHADER_ENTRYPOINT and VS_SHADER_MODEL. Without
these many .hlsl source files may not be possible to use. Extend the
VSWinStorePhone test project to cover them.
When _UNICODE is defined VS uses wmain instead of main as the entry function.
To make this correctly work on WindowsCE EntryPointSymbol needs to be set to
mainWCRTStartup instead of mainACRTStartup for console applications and to
wWinMainCRTStartup instead of WinMainCRTStartup for GUI applications.
Signed-off-by: Pascal Bach <pascal.bach@siemens.com>
When checking target types for TARGET_SUPPORTS_SHARED_LIBS == false,
enumerate exactly the library types not supported rather than trying to
maintain a list of all the types that are supported. Otherwise
add_library(SomeImportedLib UNKNOWN IMPORTED)
warns on platforms that do not support shared libraries.
Reported-by: Kelly Thompson <kgt@lanl.gov>
Since commit v3.1.0-rc1~821^2 (Windows: Use response files to specify
link libraries for GNU tools, 2014-03-04) we use a response file to pass
possibly long linker flag lists to the GNU linker on Windows. On MinGW,
this may cause gfortran to use a response file to pass some flags to its
own internal invocation. This is okay except when we are parsing
implicit link flags from the compiler ABI detection build. If gfortran
uses a response file in that case then we may miss extracting some of
the implicit link flags, such as -lgfortran. Fortunately, in the
compiler ABI detection case we do not actually link to anything so the
response file is empty. Work around this problem by simply not using a
response file when the list of flags it is used to pass is empty (or
just whitespace).
Reported-by: Bill Somerville <bill@classdesign.com>
8a75c7ef Help: Document the export limitation of INTERFACE_SOURCES.
e1348056 Export: Disallow export of targets with INTERFACE_SOURCES
bb5905bb cmTarget: Don't allow relative paths in INTERFACE_SOURCES
808c77e2 Merge branch 'revert-cached-regex-clear' into revert-cached-regex-clear-for-master
7d674b5f Revert "ClearMatches: Only clear matches which were actually set" (#15261)
This can be allowed in the next release, but it needs to have some
features present and tested such as
* Ensuring that relative paths do not appear in the generated property.
* Ensuring that paths to the source or build directories do not appear.
* Generating a check in the file for CMake 3.1 or later so that the
resulting property will be consumed.
* Ensuring that any referenced targets are part of an export set and
generating a check for them.
* INSTALL_INTERFACE and BUILD_INTERFACE content.
All of these checks are already done for INTERFACE_INCLUDE_DIRECTORIES,
but it is too late to add them for INTERFACE_SOURCES for CMake 3.1.
As the checks introduce some new error conditions, it is better to
disallow exporting fully for this case and introduce proper error
conditions later instead of policies.
Follow the pattern of checks that are made for INTERFACE_INCLUDE_DIRECTORIES.
Existence is already checked by cmSourceFile::GetFullPath. Add a check
to disallow relative paths in source directories. Otherwise code such as
target_sources(lib1 INTERFACE foo.cpp)
would fail if consumed by a target in a different directory.
Unlike the INTERFACE_INCLUDE_DIRECTORIES behavior, we don't care whether
the entry comes from an IMPORTED target or not. In the include directories
case, the directory for a non-imported target might not exist yet but
might be created. In the sources case, a file which does not yet
exist in the filesystem must be explicitly marked with the GENERATED
property.
Adjust existing tests and add a new test for the error.
Since commit v3.1.0-rc1~688^2~15 (cmTarget: Add a method to obtain list of
filenames for sources, 2014-03-17) we have code paths that lookup sources by
strings containing their own full path after normalization to the actual case
on disk. This fails in the case that a cmSourceFile has already been created
with a different case in the filename. The comparison of the directory works
because it is always normalized. Only the comparison of the file name fails.
Fix this by using a case-insensitive comparison of source file names on
platforms that do not have case-sensitive filesystems.
Extract a new method to encapsulate the requirements of evaluating
dependent-expressions, namely, propagation of the
EvaluateForBuildsystem setting, which is missing from the
getLinkedTargetsContent implementation.
Commit v3.1.0-rc1~688^2 (Genex: Only evaluate TARGET_OBJECTS to determine
target sources., 2014-03-20) introduced an error case for use of
TARGET_OBJECTS outside of the context of generating the buildsystem,
as the path to object files may be dependent on buildsystem
variables (See bug #15226).
Commit v3.1.0-rc1~314^2 (Allow INTERFACE_SOURCES to specify
$<TARGET_OBJECTS> (#14970), 2014-07-09) made it possible to
propagate such content to dependent targets.
While that commit propagated the EvaluateForBuildsystem setting
for the case of a TARGET_PROPERTY expression, as generated for
direct dependencies of a target in
cmTargetInternals::AddInterfaceEntries, it did not add propagation
for content from further transitive target dependencies, as determined
by getLinkedTargetsContent.
This reverts commit v3.1.0-rc1~557^2~2 (ClearMatches: Only clear matches
which were actually set, 2014-03-12). The optimization did not track
the match count in the same scope as the variables, allowing possible
inconsistency.
Resolve conflicts in Source/cmIfCommand.cxx, Source/cmMakefile.cxx,
and Source/cmMakefile.h by moving the changes to the new location
of the code involved.
It gets incremented while entering a loop block (e.g. foreach or while)
and gets decremented when leaving the block. Because scope borders for
example at function borders must be taken into account the counter is
put into a stack. With every new scope an empty counter is pushed on the
stack, when leaving the scope the original value is restored.
This will allow easy querying if the break command is properly nested
within a loop scope.
Signed-off-by: Gregor Jasny <gjasny@googlemail.com>
7a687292 ccmake: Cleanup and simplify conditional blocks for HP-UX
44f02b42 ccmake: Use standard getmaxyx instead of non-standard getmax[xy]
ee3d06a4 ccmake: Remove incomplete support for cur_colr on old HP-UX
This commit fixes a bug where it was impossible to specify
/INCREMENTAL to Fortran projects built with Visual Studio.
The problem was due to the fact that .vfproj files expect
the value of this flag to be "linkIncremental{No,Yes},
whereas .vcproj files expect this value to be 0, 1, or 2.
The implementation of this fix adds a new data structure for
Visual Studio linker flags specific to Fortran. This can
easily be extended in the future if more such discrepencies
between C/C++ and Fortran linking are discovered.
Re-run if the input file changes or if the output file is removed.
This only works with the Makefile generators currently. The limitation
of the Ninja generator is tracked as issue #15256. The IDE
generators will need larger refactoring as they currently rely on
being able to determine the depends and output files at the start of
generate-time, which is too early for the file(GENERATE) case.
67bd514a Ninja: Refactor restat to be a string internally
ef42e57d Ninja: Use a TARGET_FILE variable to hold the link output file
592644c4 Tests/BuildDepends: Drop unneeded help for Ninja
2d75d7e5 Help: Add notes for topic 'console-pool'
f42d86f0 Ninja: Implement USES_TERMINAL using the console pool if available
f281ae01 Ninja: Remove unused declaration
d5eae556 Ninja: factor out the test for console pool support
4d1fedf4 Give the interactive cache editor the USES_TERMINAL property
fe5d6e8c Add USES_TERMINAL option for custom commands
ad6ee426 Rename doing_verbatim to doing_nothing
A common idiom in CMake-based build systems is to have custom commands
that generate files not listed explicitly as outputs so that these
files do not have to be newer than the inputs. The file modification
times of such "byproducts" are updated only when their content changes.
Then other build rules can depend on the byproducts explicitly so that
their dependents rebuild when the content of the original byproducts
really does change.
This "undeclared byproduct" approach is necessary for Makefile, VS, and
Xcode build tools because if a byproduct were listed as an output of a
rule then the rule would always rerun when the input is newer than the
byproduct but the byproduct may never be updated.
Ninja solves this problem by offering a 'restat' feature to check
whether an output was really modified after running a rule and tracking
the fact that it is up to date separately from its timestamp. However,
Ninja also stats all dependencies up front and will only restat files
that are listed as outputs of rules with the 'restat' option enabled.
Therefore an undeclared byproduct that does not exist at the start of
the build will be considered missing and the build will fail even if
other dependencies would cause the byproduct to be available before its
dependents build.
CMake works around this limitation by adding 'phony' build rules for
custom command dependencies in the build tree that do not have any
explicit specification of what produces them. This is not optimal
because it prevents Ninja from reporting an error when an input to a
rule really is missing. A better approach is to allow projects to
explicitly specify the byproducts of their custom commands so that no
phony rules are needed for them. In order to work with the non-Ninja
generators, the byproducts must be known separately from the outputs.
Add a new "BYPRODUCTS" option to the add_custom_command and
add_custom_target commands to specify byproducts explicitly. Teach the
Ninja generator to specify byproducts as outputs of the custom commands.
In the case of POST_BUILD, PRE_LINK, and PRE_BUILD events on targets
that link, the byproducts must be specified as outputs of the link rule
that runs the commands. Activate 'restat' for such rules so that Ninja
knows it needs to check the byproducts, but not for link rules that have
no byproducts.
Use an explicit "$TARGET_FILE" variable instead of "$out" so that
we can have multiple output files while still only referencing the
main one in command lines.
Now that we know the year component of this VS version we
can add it to the generator name. For convenience, map
the name without the year to the name with the year.
Visual Studio 14 (2015) complains if a static character array is
declared with more than 65535 elements. This limit should be large
enough for SharedForward clients, so just hard-code that instead of
trying to compute a limit.
Teach the add_custom_command and add_custom_target commands a new
USES_TERMINAL option. Use it to tell the generator to give the command
direct access to the terminal if possible.
CMake requires both the Desktop SDK and the correct platform SDK
(Windows Phone or Windows Store) to be installed when targeting the
Windows mobile platforms. Verify that the right platform components are
installed and give a more detailed error message when something is
wrong.
string SUBSTRING command now ignores length if it points
past end of string and uses end of string instead.
String SUBSTRING tests now cover more corner cases.
1abd7cd9 Use containers of labeled search paths instead of individual members
2a9ac4bd Encapsulate search path manipulation functions into a seperate class.
32922840 Refactor and seperate search path construction for find commands
The special case added by commit v2.4.0~3051 (When building CMake
itself, use the new cmake to install so that the current cmake can be
overwritten, 2004-06-09) does not make sense when cross-compiling.
The evaluation files must be known before cmTargetTraceDependencies
attempts to find them, but we must actually generate the files after
cmTargetTraceDependencies, as that can add to target SOURCES. The
limitation is that the generated output name must not depend on the
SOURCES of a target if the generated file is used by that target.
Mark the output files as GENERATED so that trace dependencies does
not expect them to already exist in the filesystem.
Move the invokation of ForceLinkerLanguage in the Generate logic
to after the generated file names are known. ForceLinkerLanguage
tries to determine the sources of a target (in order to determine
an already-known language) and otherwise fails to get information
about the generated file.
Test that the output of file(GENERATE) can be used as a target source
file and that accessing the target SOURCES in the name of the output
file is an error. Accessing the TARGET_OBJECTS would be a similar
error if it was legal to use that generator expression in this
context. That is not currently possible and is a different error
condition, so test the current error output as a reminder to change
the expected output if that becomes possible in the future. Test
that generated rule files resulting from cmTargetTraceDependencies
appear in the SOURCES generated in the output file.
Manage classes of search paths in labeled containers. This removes the
need to have a seperate member variable for each type of search path, but
also allows path types to be grouped togethor in various different ways
and manipulated as subsets of the full set of search paths.
The functions for adding the various different types of paths have been
factored out into a new class, cmSearchPath. It is to be used as a helper
container class for the various find_* commands.
Prior to this commit, the set of search paths to traverse for find commands
was incrementally constructed. This change allows each group of paths, i.e.
CMakeVariablePaths, UserHintsPaths, SystemEnvironmentPaths, etc. to be
constructed and manipulated independently, and then all combined togethor.
Visual Studio 12 (2013) deprecated GetVersionEx:
warning C4996: 'GetVersionExW': was declared deprecated
in favor of either "versionhelpers.h" or VerifyVersionInfo, neither of
which exist in some of the older compilers we support. Rather than
try to port conditionally to VerifyVersionInfo, simply suppress the
warning for now.
Since commit v3.1.0-rc1~227^2~1 (De-duplicate shared library targets in
generated link lines, 2014-07-30) we de-duplicate shared library targets
on the link line. However, some toolchains will fail linking if an
executable is linking to a shared library that is not used directly and
a static library that depends on the shared one. The linker may not
keep the reference to the shared library the first time and then the
symbols needed by the static library may not be found.
Fix this by reversing the direction of the for loop that removes the
duplicate shared libraries, in order to ensure that the last occurrence
of the library is left instead of the first one.
Extend Tests/Dependency with a case covering this behavior. Create an
executable that links to a shared library and a static library but only
needs the shared library as a dependency of the static library.
Co-Author: Brad King <brad.king@kitware.com>
b6b37e30 Makefile: Add assembly and preprocessed targets for Fortran
0842b084 Makefile: Refactor checks for lang-specific targets and export compile cmds
The logic introduced in commit v3.1.0-rc1~688^2~9 (Genex: Evaluate
TARGET_OBJECTS as a normal expression, 2014-02-26) ordered a map
by pointer value and then constructed a list of object files by
iterating over the map. This is not deterministic.
Since commit v3.1.0-rc1~688^2~5 (cmTarget: Allow any generator
expression in SOURCES property, 2014-03-18) the order produced by the
above-mentioned logic started being used for the actual list of object
files on the link line. Since it is not deterministic, spurious
re-links occur after re-running CMake simply because the order of
objects changed on the link line.
Fix this by iterating over the original vector of source files instead
of the map. This has a deterministic order.
The checks are now split into languages that are able to generate
assembly listings, languages that are able to generate preprocessed
listings, and languages that are able to export the compile commands.
For unescaped file: URLs on Windows, libcurl expects
the ANSI code page.
This fixes the CMake.FileUpload test when CMake is configured
to use UTF-8 internally with a non-ascii build directory name.
1531df2b configure_file: Warn about unknown arguments
4abbb140 Qt4: Fix configure_file call to use COPYONLY, not COPY_ONLY
bd7ba8e2 KWSys: Fix configure_file call to use COPYONLY, not COPY_ONLY
e9282782 Help: Fix configure_file call to use COPYONLY, not COPY_ONLY
Extend the RunCMake.configure_file test with a case covering possible
common typos of the COPYONLY option.
Reported-by: Iosif Neitzke <iosif.neitzke@gmail.com>
6e1c359f QtAutogen: Regenerate qrc files if their input changes (#15074)
a2995318 QtAutogen: Expand rccfiles into a vector early in the autogen process.
506151af QtAutogen: Extract a GetRccExecutable method.
d1b62185 Merge branch 'parent-scope-tests' into variable-pull-failure
5f414cef Revert "cmDefinitions: Don't store parent lookups"
e0c0b1ac test: add a test for PARENT_SCOPE with multiple scopes
064c415d test: add test for PARENT_SCOPE behavior
Get dependencies from the output of ``rcc --list`` if using
Qt 5. Otherwise process the file in the same way as the
qt4_add_resources macro.
This does not work for RCC files which are generated.
The cmake_autogen build step is implemented as a PRE_BUILD step
of the target currently if possible, rather than a standalone
custom target. This is to keep the number of (synthesized)
custom targets that appear in the UI low, but in some cases
it is necessary to fall back to a full custom target.
Fall back to a full custom target for the VS builds if autorcc
is used.
This reverts commit 5abfde6cb8.
The behaviors associated with implicit pulldown on variable lookup
seriously conflict with the optimizations made in these commits.
Basically, since values were copied upon variable lookup, not just on
PARENT_SCOPE, coupled with PARENT_SCOPE's behavior based on whether the
variable is in the current scope or not causes serious problems with not
storing a value for every variable at every scope.
The commit changed behavior of the following example, among other cases:
function(test_set)
set(blah "value2")
message("before PARENT_SCOPE blah=${blah}")
set(blah ${blah} PARENT_SCOPE)
message("after PARENT_SCOPE blah=${blah}")
endfunction()
set(blah value1)
test_set()
message("in parent scope, blah=${blah}")
Reported-by: Alex Merry <alex.merry@kde.org>
Reported-by: Ben Cooksley <bcooksley@kde.org>
In the case of:
-DCACHE_VARS=-DEXTERNAL_PROJECT_CMAKE_ARG:BOOL=TRUE
the variable is parsed out as:
CACHE_VARS=-DEXTERNAL_PROJECT_CMAKE_ARG
because the parser allows '=' in the variable name. Disallow such a name
on the command line.
Changes in commit b9aa5041 (cmLocalGenerator: Simplify GetIncludeFlags
output formatting, 2014-03-04) caused Windows Resource Compiler include
directories to be computed as relative paths in the Ninja generator.
This breaks the cmcldeps handling of include paths. The reason for the
regression is that several cmLocalGenerator::GetIncludeFlags callers
treated the fourth "bool forResponseFile" argument as if it controlled
whether include directories were a full path. It actually did control
that by accident until the above commit.
Add an explicit "bool forceFullPaths" argument to GetIncludeFlags
and thread the value through ConvertToIncludeReference as needed.
Update GetIncludeFlags call sites that really wanted to control the
forResponseFile setting to be aware of the new argument. Extend the
VSResource test to cover this case.
631fadea Help: Add notes for topic 'fix-OSX-bundle-rpaths-and-Qt5'
50e261dd OSX: Warn when attempting to change runtime paths on OS X 10.5
9b98fd52 cmake-gui: Make sure we bundle Qt5 Cocoa platform plugin
83a06bb4 BundleUtilities: Framework codesign Resources/Info.plist & Current
f7df82ac BundleUtilities: Resolve & replace @rpath placeholders
14bc686f GetPrerequisites: Make sure dyld placeholders are prefixes
6c313797 BundleUtilities: Use find on UNIX for fast executable lookup
Even though 10.5 supports @rpath, the support is not complete
enough for CMake. For instance, install_name_tool doesn't support
adding and removing rpaths.
Also modifying BundleUtilities test to remove an undesirable cmake
generated runtime path. The intent was to build with the install
rpath as is done with the other cases in this test.
e0e75a72 Help: Add notes for topic 'ctest-memcheck-sanitizers'
7345a1f7 tests: Add a test for ctest_memcheck MemorySanitizer
0c6330da ctest_memcheck: Add support for MemorySanitizer msan
9ba8bf12 tests: add a test for ctest_memcheck UndefinedBehaviorSanitizer
816c100a ctest_memcheck: Add support for UndefinedBehaviorSanitizer ubsan
b67ef537 ctest_memcheck: Order sanitizer type code consistently
f48a2968 Tests: Organize CTestTestMemcheck inner test code
Revert commit 7243c951 (Ninja: Don't limit custom cmd side-effects to
build folder, 2014-06-27) because it causes every custom command
dependency in the source tree to get a phony rule. For large projects
these rules get too big for Ninja to handle efficiently. While the
original change addressed a valid concern, it did not seem to occur
regularly in practice because well-behaved projects generate their
side-effects only in the build tree. Until we support explicit
specification of side-effects (CMake issue #14963), we will have to use
this as a middle-ground.
f25e431d tests: set sanitizer options properly
f0661bf3 tests: fix copy/paste from tsan -> asan comments
ca9cc25c ctest: add support for additional sanitizer options
0b9ffffc ctest: update documentation for CTEST_MEMORYCHECK_TYPE
When the file is not found in $CMAKE_SOURCE_DIR/<file path>,
the CurFileName pointer remained set to the previous file. This
caused the new file's coverage data to populate the into the
wrong object giving incorrect results and occasionally resulting
in a seg fault.
The pre-defined 'console' pool is a non-buffered pool that runs with a
depth of 1. CMake re-run cannot be run concurrently and it will
eventually output something. A non-buffered pool allows to get it as
soon as possible
Also, generate the minimal required version of Ninja in the build file.
df84281d Help: Add notes for topic 'vs-nsight-tegra-generator'
69e198dc VS: Generate Nsight Tegra project revision number
5365c9ac VS: Map Nsight Tegra file types in .vcxproj files
178f56a5 VS: Fix Tegra-Android platform linking of libraries by name
7115702f Tests: Add test for VS Nsight Tegra generator support
a6289499 VS: Generate ANDROID_GUI executables as app packages
c12e4699 Add 'ANDROID_API' target property to set Android Target API
9a4df52a Add 'ANDROID_GUI' target property to mark Android applications
16569abf cmTarget: Track internally whether platform is Android
ef0fd4f0 VS: Teach vcxproj generation about the Tegra-Android platform
d09b60f5 VS: Detect compiler id of Nsight Tegra-Android toolchains
2f071466 VS: Teach VS >= 10 to recognize CMAKE_SYSTEM_NAME 'Android'
Nsight Tegra 2.0 will be revision '8'. Generate this revision number
and add a NsightTegraUpgradeOnceWithoutPrompt element to tell newer
versions not to prompt when upgrading the generated project file.
Map ".java" to JCompile, ".asm" and ".s" to ClCompile, and a few
Android-specific source file names to AndroidBuild. This allows
Nsight Tegra 1.6 and above to check up-to-dateness of such sources.
Bump NsightTegraProjectRevisionNumber to 7 to allow these fields.
When an executable is marked with ANDROID_GUI, generate an AntBuild
step in the .vcxproj file and point it at the directory found to
contain AndroidManifest.xml. Assume it also contains build.xml.
This version of the Intel Fortran plugin to Visual Studio says:
please make sure that $(OutDir), $(TargetName) and $(TargetExt)
property values match the value specified in %(Link.OutputFile)
We must set TargetName and TargetExt in addition to the existing
setting for OutputDirectory. The settings do not appear to hurt
older versions of Intel Fortran, so set them unconditionally.
Extend the FortranOnly test to cover a corresponding use case by
using the OUTPUT_NAME target property.
Inspired-by: Ian Harvey <Ian.Harvey@megms.com.au>
c655f0c4 VS: Drop GenerateManifest from .vcxproj files for non-MS tools
227a3367 VS: Use case-insensitive check for hlsl,jpg,png,xml file extensions
4a24015a Tests: Always detect VS and SDK availability on Windows
Also add a 'CMAKE_ANDROID_GUI' variable to set the property default
so a project can easily make all executables Android applications.
An Android application executable file has the same extension as a
shared library (.so).
Complete the basic implementation of the VS Tegra-Android generators
by replacing parts of vcxproj files that are specific to MS tools
with settings defined for the NVIDIA Nsight Tegra tools.
Current limitations include:
* We have no "flag table" so flags will be passed in the additional
options fields instead of mapped to the vcxproj elements defined
by Nsight Tegra msbuild platform definition files.
* We have no interface to set the AndroidArch, AndroidStlType, or
AndroidTargetAPI fields so defaults will be used.
* The Nsight Tegra msbuild platform definition files do not provide
a working "Utility" target type so for add_custom_target we need
to use a "StaticLibrary" target type and leave out ClCompile rules.
* There is also no target type for plain command-line executables
so for add_executable we need to use a "DynamicLibrary" target.
Full application bundles will likely require new CMake target
properties (like WIN32_EXECUTABLE for Windows GUI executables).
When CMAKE_SYSTEM_NAME is 'Android', check for an installation of
'NVIDIA Nsight Tegra Visual Studio Edition' and generate .vcxproj
files for the "Tegra-Android" platform. Also make the installed
version available in a CMAKE_VS_NsightTegra_VERSION variable.
In commit v3.0.0-rc1~429^2~2 (Remove the Location member from cmTarget,
2012-10-07) a few extra slashes were added to the path construction
logic, perhaps due to a partially implemented attempt at handling the
case that GetDirectory returns an empty string. This leads to LOCATION
paths with double slashes in some cases. Remove them now.
Unlike with Unix Makefiles generator modifying compiler paths was not
protected with Ninja generator. It was possible to modify them in the
cache without the expected effect on the generated solution. Also
activate corresponding tests with Ninja.
In cmGlobalGenerator::EnableLanguage, fix error messages for missing
module files to actually name the missing module instead of using the
empty string returned by GetModulesFile.
When CMAKE_SYSTEM_NAME is 'WindowsCE':
* Set the Subsystem and EntryPointSymbol accordingly.
* When CMAKE_SYSTEM_VERSION is 8.0 (Windows CE 2013),
select the CE800 toolset by default.
be6a555d Tests: Test setting a generator platform in a toolchain file
d506fee8 Tests: Use -A option to pass generator platform selection
11c9ddd6 ExternalProject: Use -A option to pass generator platform
29bd843e CTest: Use -A option to pass generator platform selection
eb7d8156 cmake: Add -A option to specify a generator platform
858d5a0b Fix if() checks of CMAKE_SYSTEM_NAME on Cygwin
e177e7af FPHSA: Avoid if() dereferencing of quoted variable
425acc52 cmcurl: Use if(DEFINED) to simplify conditions
cede5cbd libarchive: Avoid depending on if() to dereference a quoted variable
2d97178b FindGTK2: Avoid depending on if() to dereference a quoted variable
0b12815d Modules/Test*.cmake: Use if(DEFINED) to simplify conditions
188a1f23 If: Introduce policy CMP0054 - don't dereference quoted variables in if()
b900c1cc If: Extract cmConditionEvaluator from if() implementation
Define the 'cmake -A' option to set CMAKE_GENERATOR_PLATFORM
without having to spell out the whole variable name. We choose
the name '-A' for "platform" because '-P' is already taken, and
in the common use case the "platform" is actually an architecture
(e.g. x64).
Teach the RunCMake test infrastructure to use -A to pass the generator
platform. Extend the RunCMake.GeneratorPlatform test with a case to
verify that the -A option cannot be repeated.
The CMAKE_SYSTEM_NAME is "CYGWIN", but we also define a variable
named "CYGWIN" to "1". Avoid allowing if() to expand the "CYGWIN"
string as a variable.
Call SetSystemName, SetGeneratorPlatform, and SetGeneratorToolset
exactly once after reading CMakeSystem.cmake, and not again on another
call to enable_language() or project().
On Arch Linux, /lib and /lib64 are symlinks to /usr/lib. When ordering
runtime library search paths, we must not consider these to be distinct
directories. Before considering conflicts between two directories,
check that they do not have the same 'realpath'.
Inspired-by: Myles English <mylesenglish@gmail.com>
The ctest_configure command already reads the CTEST_CMAKE_GENERATOR
variable to get the value for the cmake -G option. Read new variable
CTEST_CMAKE_GENERATOR_PLATFORM to pass on as CMAKE_GENERATOR_PLATFORM.
The "ctest --build-and-test" mode already has "--build-generator" to
specify the -G option to CMake. Add a "--build-generator-platform" option
to specify a value to pass on as CMAKE_GENERATOR_PLATFORM.
For VS generator names that do not specify the platform name, read
CMAKE_GENERATOR_PLATFORM to get it.
Extend the RunCMake.GeneratorPlatform test with a case covering
use of the x64 platform when the test generator is a Visual Studio
generator whose name does not specify a platform.
Reject the option by default. It will be implemented on a per-generator
basis. Pass the setting into try_compile project generation. Add cache
entry CMAKE_GENERATOR_PLATFORM and associated variable documentation to
hold the value persistently.
Add a RunCMake.GeneratorPlatform test to cover basic use cases for the
option. Verify that CMAKE_GENERATOR_PLATFORM is empty by default, and
that it is rejected when the generator does not support a user setting.
Rename the 'PlatformName' member to 'DefaultPlatformName' and make
sure it is only read through a 'GetPlatformName()' call. This will
allow non-default names to be chosen later.
Move handling of an empty toolset name into the implementation of the
method. This simplifies the VS 10 implementation of default toolset
selection because it has one code path that is always called.
Xcode requires a separate PBXFileReference for each target source group
that references a source file. Xcode 6 now diagnoses re-use of the same
PBXFileReference from multiple source groups. Add the referencing
target name to our internal map key so we use a per-target reference.
Xcode requires a separate PBXFileReference for each target source group
that references a source file. Xcode 6 now diagnoses re-use of the same
PBXFileReference from multiple source groups. Add the referencing
target name to our internal map key so we use a per-target reference.
39fefde2 VS: Add test case for Windows Phone and Windows Store
89da8465 MSVC: Define 'WIN32' for Windows Store and Windows Phone
ed7f085f Help: Add notes for topic 'vs-windows-apps'
dd11ae8f VS: Do not compile C sources as WinRT (#15100)
b8e40538 VS: Mark Windows Phone and Store targets as App Containers
0432f062 VS: Always ignore ole32 on Windows Phone 8.0
e6ff2f8b VS: Generate Windows Metadata for WinRT components
ee48f4c7 VS: Generate Windows Phone and Windows Store projects as Unicode
cb1aceed VS: Add VS_WINRT_COMPONENT property to enable CompileAsWinRT
401269e4 VS: Handle .pfx files explicitly in generator
23782171 VS: Handle AppxManifest sources explicitly in generator
bc373c6d VS: Set Window Phone/Store app type in CMake-generated targets
d89b2889 VS: Mark CMake-generated targets as Utility in .vcxproj files
03ad8f28 CMakeDetermineCompilerABI: Link with standard libraries on MSVC
The MSVC /ZW flag is valid only for C++ sources. Whenever we enable
CompileAsWinRT for the whole target, disable it for all C sources.
Update the documentation of VS_WINRT_COMPONENT to drop the statement
about undefined behavior for non-C++ sources, because it is now
defined as expected.
* Add AppContainerApplication to non-UTILITY targets
* Generate app manifest and related files if project does not provide them.
Place them in a per-target directory to avoid clashes.
* Mark WinRT components with WinMDAssembly
* Import Windows Phone 8.0 targets in .vcxproj files when necessary,
and reference platform.winmd.
Inspired-by: Paul Annetts <paul@lightunobscured.com>
cbd1d42b Help: Add notes for topic 'vs-masm'
0f8522a6 VS: Add MASM support to VS 8 and 9 (#8170, #14984)
a43f4400 VS: Move internal MasmEnabled member up to VS 7 generator
df3b007d VS: Add test for MASM support
e8727449 VS: Populate MASM tool build settings in .vcxproj files
0271a5f9 VS: Manually fix MASM flag table entries
1d662e48 VS: Generate MASM flag tables from MSBuild tool files
4f6940df VS: Fix ASM_MASM support in VS >= 10
d7866c52 ASM_MASM: Fix selection of ml64
0374abdb ASM_MASM: Add preprocessor definitions to compile lines
5b0a46e1 ASM_MASM: Do not require compiler to be a full path
802dbe52 cmLocalVisualStudio7Generator: Rename local 'lang' var
Deprecate VS_WINRT_EXTENSIONS and document VS_WINRT_COMPONENT as for VS
generators only. Also define _WINRT_DLL in SHARED libraries in order to
get a .lib produced.
Inspired-by: Paul Annetts <paul@lightunobscured.com>
Teach cmGeneratorTarget to classify .pfx files as package
certificate key files. Teach cmVisualStudio10TargetGenerator
to write them as PackageCertificateKeyFile in .vcxproj files.
Inspired-by: Minmin Gong <minmin.gong@gmail.com>
Teach cmGeneratorTarget to extract .appxmanifest sources separately.
Teach cmVisualStudio10TargetGenerator to write them with the
AppxManifest tool in .vcxproj files. This will allow us to detect
whether the project provides an application manfiest explicitly.
Generate the ApplicationType and ApplicationTypeRevision elements in
.vcxproj files for CMake-generated targets like 'INSTALL' and
'RUN_TESTS'. This was accidentally left out of commit 709cebde (VS:
Generate WindowsPhone and WindowsStore application types, 2014-07-31).
Move the member from cmGlobalVisualStudio10Generator to
cmGlobalVisualStudio7Generator to make it useful for earlier
versions of VS. Set the member to true only starting with
cmGlobalVisualStudio8Generator since we will not implement
MASM support for versions less than VS 8.
5fcb42ab VS: Refactor include directory generation in .vcxproj files
8e026aa7 VS: Refactor include directory slash conversion
9633d112 cmIDEOptions: Add HasFlag method to test if a flag is set
84100102 cmIDEOptions: Add an AppendFlag overload to append multiple values
aa21001b Help: Add notes for topic 'vs-special-source-file-properties'
6fe770e1 VS: Add a source file property to set the hlsl shader type
9b4dc2ad VS: Add a source file property to mark content for Windows App deployment
f063a914 VS: Re-arrange WriteExtraSource to support tool configuration
653529ce CTest: Allow / to be in the build name, and be consistent with the build name
39b5df2f ctest_update: Add CTEST_UPDATE_VERSION_ONLY option to only note the version
Prior to this change / was not allowed in the build name. This was tested
with a CDash server and worked. In addition the safe build name was not
used everywhere. This caused mismatched build names to be in the xml
files going to CDash which caused different rows to be created for the
same build.
This allows ctest_update to get the current version without actually
changing the repository. This is useful when using Jenkins or an
external project to update the source to a specific version, but you
still want the current version to show up in CDash.
The lexer changes in commit v3.0.0-rc1~495^2 (Add Lua-style long
brackets and long comments to CMake language, 2013-08-06) accidentally
left out matching '[' as a single character in an unquoted argument.
Add a lexer rule to match it and extend the RunCMake.Syntax test to
cover this case.
The current file parser for a MUMPS routine uses a period "." as the
one of the signals that a line of MUMPS code is executable. This is not
a correct assumption. Add the period to the list of characters that CTest
will not consider the start of a line of code.
Update the test routine to have an entry point with code to match the scenario
mentioned above.
Run cmparseMSBuildXML.py on masm.xml to generate our flag tables:
python cmparseMSBuildXML.py -x ".../MSBuild/Microsoft.Cpp/v4.0/BuildCustomizations/masm.xml" > cmVS10MASMFlagTable.h
python cmparseMSBuildXML.py -x ".../MSBuild/Microsoft.Cpp/v4.0/V110/BuildCustomizations/masm.xml" > cmVS11MASMFlagTable.h
python cmparseMSBuildXML.py -x ".../MSBuild/Microsoft.Cpp/v4.0/V120/BuildCustomizations/masm.xml" > cmVS12MASMFlagTable.h
python cmparseMSBuildXML.py -x ".../MSBuild/Microsoft.Cpp/v4.0/V140/BuildCustomizations/masm.xml" > cmVS14MASMFlagTable.h
Fix up the declaration names at the top of each file.
Use the cmVisualStudioGeneratorOptions flag map to add the
AdditionalIncludeDirectories element to the project file.
Move appending of %(AdditionalIncludeDirectories) to the
locations that populate the flag vectors instead of where
they are written out.
CPack IFW generator updates:
- Group now can have script;
- Root package (for monolithic or one package installers) can be
configured from group.
CMake updates:
- Native installation (no Unspecified component).
Teach the Makefile generators to escape '#' characters on the right hand
side of variable assignments in flags.make. This is needed for flags
like '-Wno-error=#warnings'. Otherwise the make tool treats them as
comments and leaves them out of the _FLAGS variable value.
Add a case to the CompileOptions test covering '#' in a COMPILE_OPTIONS
value, at least on compilers where it is known to be supported.
2b20110f MSVC: Select default standard libraries for ARM platform
2dfcf0ed VS: Fix generation of desktop applications for ARM
dbb5a7ee CMakeDetermineCompilerId: Fix detection for VS ARM platform
Create a VS_DEPLOYMENT_CONTENT source file property, supporting
generator expressions, to compute whether a source file should be marked
as DeploymentContent or ExcludedFromBuild in Windows Phone and Windows
Store projects.
Inspired-by: Minmin Gong <minmin.gong@gmail.com>
Add WindowsSDKDesktopARMSupport to the .vcxproj to avoid 'error MSB8022:
Compiling Desktop applications for the ARM platform is not supported.'
from VS.
5d3d9a22 Help: Add notes for topic 'vs-windows-phone-and-store'
401a00d9 VS: Set WindowsPhone and WindowsStore min VS version required
709cebde VS: Generate WindowsPhone and WindowsStore application types
72395ab2 VS: Add .sln "Deploy" mark for WindowsPhone and WindowsStore binaries
2074f581 MSVC: Add system libs for WindowsPhone and WindowsStore
c72f0887 MSVC: Add default WindowsPhone and WindowsStore compile flags
1c94558a MSVC: Disable incremental linking for WindowsPhone and WindowsStore
592098e2 Define 'WINDOWS_PHONE' and 'WINDOWS_STORE' variables
aa42a78f Add WindowsPhone and WindowsStore platform information modules
b94ddf6c CMakeDetermineCompilerId: Recognize WindowsPhone and WindowsStore
d7938bff VS: Select WindowsPhone and WindowsStore default toolsets
3abd150c VS: Save WindowsPhone and WindowsStore system internally
Split the monolithic cmCPackIFWGenerator source into three parts:
cmCPackIFWGenerator, cmCPackIFWInstaller, and cmCPackIFWPackage
to isolate the implementations somewhat.
Add a COMMON option to the cpack_ifw_configure_component command to make
the data component common to its parent group.
Change the default packaging method to ONE_PACKAGE_PER_COMPONENT.
This is not incompatible because the CPack IFW generator has not
yet been in a release.
The implementation of CMP0047 detects the QNX compiler id internally,
then changes it to GNU after the language is fully enabled. This is too
late to correctly set the old IS_GNU variables, so set them as part of
the policy OLD behavior.
Reported-by: Mike Lattanzio <mlattanzio@blackberry.com>
The implementation of CMP0047 detects the QNX compiler id internally,
then changes it to GNU after the language is fully enabled. This is too
late to correctly set the old IS_GNU variables, so set them as part of
the policy OLD behavior.
Reported-by: Mike Lattanzio <mlattanzio@blackberry.com>
When $<TARGET_PROPERTY> names a build property like COMPILE_DEFINITIONS
but not the usage requirement (INTERFACE_) version of it, the value
should be that used to build the target. It should not be influenced by
a dependent 'head' target like usage requirements are.
Extend the CompileDefinitions test with a case covering the corrected
behavior.
Reviewed-by: Stephen Kelly <steveire@gmail.com>
The context->Makefile is never NULL, but our checks for it convince
Clang scan-build that it might be NULL. Then it warns about later
unchecked uses. Drop the unnecessary checks.
This showed up because scan-build noticed outputFull was basically
a constant. Logic should be output all valgrind output. Then output
regular test output until output limit is reached.
Teach the VS >= 10 generators to recognize these system names and select
the appropriate default toolset for the system version. Report an error
when the version is not known to be supported by VS.
Inspired-by: Gilles Khouzam <gillesk@microsoft.com>
Add boolean members to the VS >= 10 global generator to save
whether CMAKE_SYSTEM_NAME is WindowsPhone or WindowsStore
without having to repeat a string comparison.
Inspired-by: Gilles Khouzam <gillesk@microsoft.com>
Append %(IgnoreSpecificDefaultLibraries) to any user-specified
libraries so that the system-default list of libraries to ignore
is honored even when the user specifies more.
No call sites pass NULL to the output argument, so take it by
reference to avoid the if(output) conditions. Propagate the
change through the TryCompile APIs that call it.
After calls to ProcessSourceItemCMP0049, check for an empty return
string to detect a failure instead of trusting GetErrorOccuredFlag.
The latter could have been left from a preceding non-fatal error.
Extend the RunCMake.Configure test to cover a case that exposed this
problem.
Add a new additional entry to the FilePaths array when a
"package" tag has been found. This path should consist of the package
information found appended to the projects source directory.
This change will allow code held in a /src/main/java/* directory off of the
projects source directory to be found, unlike now which assumes a subdirectory
contains the code.
The linker will bring in shared libraries as a whole and use them even
for symbols that are needed by entries later in the link line.
Therefore we do not need to repeat them. De-duplicate link entries that
we know are shared libraries because we have a cmTarget associated with
them.
Tested-by: Jean-Christophe Fillion-Robin <jchris.fillionr@kitware.com>
0ac28adc VS: Map .jpg and .png sources to Image tool
58bb14d4 VS: Map .xml to XML tool
972cf1d7 VS: Map .appxmanifest sources to AppxManifest tool
15fb1022 VS: Refactor handling of resx headers
c2ef6d23 VS: Refactor handling of "header" sources in VS >= 10
2df38911 VS: Refactor handling of "extra" sources in VS >= 10
143b4005 VS: Convert 'WriteSource' tool argument to std::string
Create a WriteHeaderSource method to handle writing of sources
classified by cmGeneratorTarget as header files. This will be
useful to add special VS-specific handling for some headers.
Create a WriteExtraSource method to handle writing of sources not
classified by cmGeneratorTarget for any particular purpose. This
will be useful to add special VS-specific handling for some sources.
Add a virtual cmGlobalVisualStudio10Generator::InitializeSystem method
called from SetSystemName once the SystemName and SystemVersion members
have been populated. This will give VS version-specific generators a
chance to recognize and adapt to the target system.
Xcode 6 introduced an 'OTHER_LIBTOOLFLAGS' setting for the "Other
Librarian Flags" of a static library. Now 'OTHER_LDFLAGS' are ignored.
Teach the Xcode generator to choose the correct name for the build
setting based on the type of target and the version of Xcode.
Inspired-by: Jamie Kirkpatrick <jkp@spotify.com>
b9be4d21 Help: Add notes for topic 'cpack-ifw-generator'
73b336c9 CPackIFW: Replace use of strftime with cmTimestamp
44850a26 CPack: Add an "IFW" generator for Qt Framework Installer
09164c63 VS: Encode more content correctly in vcxproj files (#15031)
29a0642b VS: Encode mapped flag values in XML project files (#15031)
8fa087ab cmVisualStudioGeneratorOptions: Simplify XML escaping API
1c209ac1 cmIDEOption: Store mapped flag values as a vector<string>
91c93354 cmVisualStudio10TargetGenerator: Remove dupilcate line
The cmGlobalGenerator::ResolveLanguageCompiler method, invoked only by
Makefile generators, contains code originally added by commit v2.4.0~796
(..., add new generators for msys and mingw, 2005-12-22) to compute the
full path to the compiler and save the result back into the cache value.
Since then the CMakeDetermine*Compiler modules have learned to resolve
the full path to the compiler and save it in CMake*Compiler.cmake files
configured in the build tree. The value of CMAKE_<LANG>_COMPILER in the
cache is now only for reference of what the user originally specified.
The full path is now available in a normal variable of the same name,
and this is used by project code and the generators.
When the user specifies -DCMAKE_<LANG>_COMPILER=name on the command-line
of an existing build tree that uses a Makefile generator, it is first
stored in the cache with an uninitialized type. Then later when
ResolveLanguageCompiler updates the cache entry and sets the type to
FILEPATH, cmMakefile::AddCacheDefinition does CollapseFullPath on the
"name" and ends up with something like "$PWD/name" which is unlikely to
be correct. Furthermore, cmMakefile::AddCacheDefinition proceeds to
remove the normal variable of the same name, so the value originally
saved in CMake<LANG>Compiler.cmake is ignored and the generators use the
wrong path to the compiler.
Resolve this by dropping the code from ResolveLanguageCompiler that
touches the cache value of CMAKE_<LANG>_COMPILER. As explained above it
is no longer needed anyway.
Since the Sanitizers write out one log file per process, a single
test might have more than one log file. This commit allows ctest
to read all of the log files found for a particual test.
In cmVisualStudio10TargetGenerator, add missing cmVS10EscapeXML
calls around paths to source and object files, custom command
dependencies and outputs, and platform name/version values.
Teach cmVisualStudioGeneratorOptions to encode FlagMap entries
and the FlagString value properly in vcproj/vcxproj XML files.
Update the one existing call site that pre-encoded the value
to not do so.
Some FlagMap entries are ;-lists. Store values as vector<string> so
that individual values may contain ';' characters. Delay the
construction of the final ;-list until writing to the VS project file.
With this approach the generated file may contain ;-separated values
that contain encoded ';' characters.
Delay conversion of the path to object files (on the left-hand side
of dependencies) until just before they are written. Also do not
convert the format of paths written to the 'depend.internal' file.
This is consistent with the way the right-hand side of dependencies
are already handled.
Make the virtual 'Generate' method protected. Make 'DoGenerate'
the main entry point to generation. This gives cmGlobalGenerator
a chance to do some early operations before the individual
generator-specific implementations take over.
In GetLinkInterface, GetLinkInterfaceLibraries, and
GetImportLinkInterface, lookup the HeadToLinkInterfaceMap for the
current configuration first, and then index it by head target. In
GetLinkImplementationLibrariesInternal, lookup the
HeadToLinkImplementationMap for the current configuration first, and
then index it by head target.
These use a huge amount of memory that accumulates as generation
proceeds. On the Unix Makefiles generator, only GetIncludeDirectories
and GetCompileDefinitions are even called more than once per target
(once for build files, once for dependency scanning preprocessor info).
Another approach will be needed to avoid duplicate computation in the
cases where it does occur.
These use a huge amount of memory that accumulates as generation
proceeds. On the Unix Makefiles generator, only GetIncludeDirectories
and GetCompileDefinitions are even called more than once per target
(once for build files, once for dependency scanning preprocessor info).
Another approach will be needed to avoid duplicate computation in the
cases where it does occur.
a9c9b66c cmTarget: use a hash_map for cmTargets typedef
bcb6dbc1 cmTarget: help the optimizer a bit
679f3dee cmTarget: use hash_set for sets of strings
23d6520d cmTarget: Allow caching of empty genex expansions
cd54f1db cmTarget: Only copy GenEx expansions when necessary
b75fc0e1 cmTarget: Don't set properties on custom targets
66076915 cmTarget: Use static strings for special property names
cebefa71 cmTarget: Sort special property checks
97ce676e cmTarget: Fast path for regular properties
4cfa918a cmTarget: Factor out common code
85242b7d cmTarget: Use else/if trees rather than an if tree
7a526c35 VS: Delay getting platform name in local generator
e7fdb44b VS: Delay detection of VS 10 Express 64-bit tools
6e176e6d VS: Delay platform definitions until system name is known
d3d9218a VS: Remove unused method from VS 9 generator
eeb60102 VS: Refactor CMAKE_FORCE_*64 platform definitions
ecb34faa Tell generators about CMAKE_SYSTEM_NAME as soon as it is known