The default OS X 10.4 linker incorrectly searches for dependencies of
linked shared libraries only under the -isysroot location. It fails to
find dependencies of linked shared libraries in cases such as the
ExportImport test. It produces errors like:
/usr/libexec/gcc/i686-apple-darwin8/4.0.1/ld: warning can't open dynamic library:
libtestLib3Imp.dylib
referenced from: /.../ExportImport/Root/lib/libtestLib3lib.1.2.dylib
(checking for undefined symbols may be affected) (No such file or directory, errno = 2)
/usr/libexec/gcc/i686-apple-darwin8/4.0.1/ld: Undefined symbols: _testLib3Imp
referenced from libtestLib3lib expected to be defined in
libtestLib3Imp.dylib
or with CMAKE_SKIP_RPATH off to enable install_name in the Export side:
/usr/libexec/gcc/i686-apple-darwin8/4.0.1/ld: warning can't open dynamic library:
/Developer/SDKs/MacOSX10.4u.sdk/.../ExportImport/Export/impl/libtestLib3Imp.dylib
referenced from: /.../ExportImport/Export/libtestLib3lib.1.2.dylib
(checking for undefined symbols may be affected) (No such file or directory, errno = 2)
/usr/libexec/gcc/i686-apple-darwin8/4.0.1/ld: Undefined symbols:_testLib3Imp
referenced from libtestLib3lib expected to be defined in
/.../ExportImport/Export/impl/libtestLib3Imp.dylib
Note how "/Developer/SDKs/MacOSX10.4u.sdk" is prepended to the dependent
library path.
Commit 2cff26fa (Support linking to shared libs with dependent libs,
2008-01-31) and commit 82fcaebe (Pass dependent library search path to
linker on some platforms, 2008-02-01) worked around the problem by
defining platform variable CMAKE_LINK_DEPENDENT_LIBRARY_FILES. It tells
CMake to link to dependent libraries explicitly by their path thus
telling the linker where to find them.
Unfortunately the workaround had the side effect of linking dependent
libraries and defeats most benefits of LINK_INTERFACE_LIBRARIES.
Fortunately OS X 10.5 and above do not need to find transitive
dependencies at all so we can avoid the workaround on Modern OS X.
Previously we linked C, Fortran, and ASM shared libraries compiled with
the HP compiler using a direct invocation of the linker (ld). This
behavior was left historically from support for an ancient HP C compiler
that did not know how to create shared libraries. Fortran shared
libraries need to be linked with the compiler to get the language
runtime library dependencies as is already done for C++.
Update the HP-UX-HP* platform information to use the compiler front end
when linking shared libraries. This works on modern HP tools and
produces correct behavior. If there is a need to support older tools
again we can add a special case for them.
...if it matches "windres", as opposed to being exactly equal to "windres"
Cross-compiling windres compilers are named something like
"i686-w64-mingw32-windres" (for example)
automoc now defaults to strict mode, also with Qt4, i.e. it behaves as
the documentation says by default. I also inverted the switch
CMAKE_AUTOMOC_STRICT_MODE to CMAKE_AUTOMOC_RELAXED_MODE.
Docs and test adapted accordingly.
Alex
The User may now specific a list of file that shouldn't be
automatically handled by CPack but specified by the user.
Like %config(noreplace) or specific %attr.
The concerned files/dir lines will be removed from the set
automatically handled by CPack.
The mingw32-make tool does not handle parenthesis in the path to a
source file consistently. When CMake is installed in a typical location
like "c:\Program Files (x86)\CMake 2.8\" the mingw32-make tool fails on
the FortranCInterface detection project sometimes with errors like
>mingw32-make -f CMakeFiles\myfort.dir\build.make CMakeFiles/myfort.dir/my_module.f90.obj
mingw32-make: *** No rule to make target `x86)/CMake 2.8/share/cmake-2.8/Modules/FortranCInterface/my_module.f90)',
needed by `CMakeFiles/myfort.dir/my_module.f90.obj'. Stop.
due to parens in the path to the FortranCInterface source directory.
However, the behavior varies with the file name of build.make:
>copy CMakeFiles\myfort.dir\build.make CMakeFiles\myfort.dir\build2.make
>mingw32-make -f CMakeFiles\myfort.dir\build2.make CMakeFiles/myfort.dir/my_module.f90.obj
[ 3%] Building Fortran object CMakeFiles/myfort.dir/my_module.f90.obj
Tested with
>mingw32-make -v
GNU Make 3.82
Built for i386-pc-mingw32
Work around the problem by copying the whole FortranCInterface source
directory in to the project build tree.
2d11951 Merge branch 'master' into AutomocIncludedDotMocFileHandling
1eca18f automoc: add documentation for CMAKE_AUTOMOC_STRICT_MODE
bc278ce automoc: fix line length
62e223e automoc: add variable CMAKE_AUTOMOC_STRICT_MODE, to enable strict parsing
40c5167 automoc: accept even more .moc files in non-strict mode
c207f5d automoc: also accept other files when .moc is included in non-strict mode
9c0df72 automoc: add a StrictParseCppFile(), which is only qmake-compatible
174bf35 automoc: move the code for finding headers into separate function
8507eae automoc: fix handling of included _p.moc files
7ada172 automoc: some more linebreaks for the warnings for better readability
3b93e26 automoc: add extra check whether the header contains Q_PRIVATE_SLOT
4745715 Add a test case for the use of Q_PRIVATE_SLOT.
bde4edb automoc: add special handling for including basename_p.moc, with test
74ab0f6 automoc: move some code from the big parsing loop into separate functions
bc7560e automoc: add test for including a moc_abc_p.cpp file
30fd8e6 automoc: add test for including the moc file from another header
...
Teach CMakePlatformId.h to construct an "INFO:compiler_version[]" string
literal from macros COMPILER_VERSION_(MAJOR|MINOR|PATCH|TWEAK) to be
defined in CMake(C|CXX)CompilerId.(c|cpp) for each compiler. Provide
conversion macros DEC() and HEX() to decode decimal or hex digits from
integer values. Parse the version out of the compiler id binary along
with the other INFO values already present.
Store the result in variable CMAKE_<LANG>_COMPILER_VERSION in the format
"major[.minor[.patch[.tweak]]]". Save the value persistently in
CMake(C|CXX)Compiler.cmake in the build tree. Document the variable for
internal use since we do not set it everywhere yet.
Report the compiler version on the compiler id result line e.g.
The C compiler identification is GNU 4.5.2
Report CMAKE_(C|CXX)_COMPILER_(ID|VERSION) in SystemInformation test.
ae62a1c Test CMAKE_GNUtoMS option in ExportImport on MinGW and MSys
afb00fe Add CMAKE_GNUtoMS option to convert GNU .dll.a to MS .lib
61e8629 Factor makefile generator link rule lookup into helper function
a603250 Load platform files that need to know the ABI when possible
ecd8414 Fortran: Detect pointer size in gfortran on MinGW
0efe602 TinyCC: Add default compilation flags (#12605)
ec636e2 TinyCC: Add compiler info for shared libs on Linux (#12605)
1f49d72 Recognize the Tiny C Compiler (#12605)
This allows you to have more than source file with the same name but different
directories. The intermediate and configuration files are now in this same directory.
Nvcc can emit '/path' instead of '//path' which can cause a lot of grief later. We test
to see if the file exists, if it doesn't then we see if the file exists with '/'
prepended. Files that don't exist won't be added to the list.
Fix a long outstanding bug when a file in the dependency list wasn't found. This bug
wouldn't reset the dependencies, so the makefile would still want the missing file when
building. The work around was to configure twice, but this is no longer necessary.
Teach the Windows-GNU.cmake platform file to look for Visual Studio
tools matching the target ABI. Add an extra step to the link command
for shared libraries and executables that export symbols and on which a
new GNUtoMS property is set (initialized by the CMAKE_GNUtoMS option).
Tell the GNU linker to output a module definition (.def) file listing
exported symbols in addition to the GNU-format import library (.dll.a).
Pass the .def file to the MS "lib" tool to construct a MS-format DLL
import library (.lib).
Teach the install(TARGETS) command to install the MS import library next
to the GNU one. Teach the install(EXPORT) and export() command to set
the IMPORTED_IMPLIB property pointing at the import library to use the
import library matching the tools in the importing project.
Load platform files named in CMAKE_<lang>_ABI_FILES for each language
once the ABI sizeof(void*) is known. During the first configuration
this is after the test for working compiler and ABI detection checks.
During later configurations the ABI information is immediately available
because it has been saved in CMake<lang>Compiler.cmake.
Use __SIZEOF_POINTER__ which the GNU Fortran compiler defines at least
on 64-bit MinGW. Assume default size 4 on MinGW if gfortran does not
define the size.
Adding VERBATIM to the ADD_CUSTOM_COMMAND calls in the qt4 macros
ensures that paths are properly quoted when passed to the shell.
This fixes issues when building projects that contained paths with
special characters (according to /bin/sh), such as parentheses or
spaces.
Use the "-shared" option to link shared libraries. The compiler does
not support "-Wl," or "-rpath" but does know how to pass "-soname"
through to the linker.
Perform multiple separate searches in order. If ZLIB_ROOT is set search
it exclusively so it takes precedence over CMAKE_PREFIX_PATH. This
allows a user to provide -DZLIB_ROOT=/path/to/zlib/prefix on the CMake
command line to tell it exactly where to find zlib. Otherwise fall back
to a normal search.
Inspired-by: Andreas Schneider <asn@cryptomilk.org>
982b766 Eclipse: use new variable CMAKE_ECLIPSE_GENERATE_SOURCE_PROJECT
1110e45 Eclipse: create links to subprojects also in the source-project (#12579)
65dde30 FindGettext: two more fixes for files with multiple dots
e48fcff -make GETTEXT_PROCESS_PO_FILES() work with files with multiple dots
ecb4459 Strip trailing whitespace
Handle @rpath much like other Unixes, by doing a find_file with the given directories.
Also, consider a library to be local if it is found in the same directory or a subdirectory relative to the user
executable/library. Previously, it was local only if found in the same directory.
This case is encountered when @rpath is used with framework libraries, which are inside a directory tree.
Previously ECLIPSE_CDT4_GENERATE_SOURCE_PROJECT was used, but the
new name CMAKE_ECLIPSE_GENERATE_SOURCE_PROJECT is more in line with
the general naming conventions in cmake, and, more importantly IMO,
in cmake-gui it now appears right next to the other eclipse-related
variables, which all start with CMAKE_ECLIPSE_.
A warning is printed if the old variable is TRUE and the new one isn't,
so users should notice that they have to enable the new one.
Alex
537020f Tests: Nudge MFC test to pass on VS 6 dashboards (#11213)
51f442e VS11: Update InstallRequiredSystemLibraries.cmake for VS11 (#11213)
d85ab7a Tests: Add environment logging to the MFC test (#11213)
011694c VS10: Use expected values for UseOfMfc (#11213)
a2e6d24 Tests: Fix MFC test to work with VS 10 and later (#11213)
Patch by Albert Astals Cid.
E.g. plasma_package_org.kde.activityswitcher.po will now be installed
correctly as plasma_package_org.kde.activityswitcher.mo, and not as
plasma_package_org.mo.
This is kind-of related to #12282
Alex
I've just found out that use of FindBISON.cmake shipped with CMake 2.8
on system where bison++ is default bison executable (e.g. Debian Linux)
will result in corrupted CMakeCache.txt file and parse error due to
"Offending entry"
As FindBISON.cmake logic used to obtain installed bison executable
version is tailored to match only the message used in GNU Bison it fails
on absolutely different Bison++ version message and whole version
message including \n characters is stored into BISON_VERSION which is
then dumped into CMakeCache.txt, so everything after first \n character
makes "Offending entry".
467ee36 Check plugin variables are defined before warning.
4571ea6 Don't resolve directories; are never relative.
9cfc920 Match fixup_qt4_executable with documentation.
This commit adds a new target property AUTOMOC_MOC_OPTIONS, which
can be set to add extra options for the moc invocations done via automoc.
This is equivalent to the OPTIONS parameter in the qt4_wrap_cpp() macro.
Alex
66bd543 Eclipse: fix#12417, don't create wrong src pathentries
70de8bd Eclipse: detect number of CPUs, set CMAKE_ECLIPSE_MAKE_ARGUMENTS accordigly
117f2b8 Eclipse: add Build and Clean targets to targets
c3f30bd Eclipse: move code for generating links to targets into separate function
cef6bd9 Eclipse: move code for generating links to projects into separate function
b6d4de7 Eclipse: add virtual folder for each target
COVERAGE_EXTRA_FLAGS is a space separated value of extra flags
that will be passed to gcov when ctest's coverage handler invokes
gcov to do coverage analysis.
Map to CoverageExtraFlags in the CTest ini file. Use default value
of "-l" to match the coverage handler's earlier behavior from ctest
2.8.4 and earlier. The fix for related issue #11717 had added a " -p"
which was the cause of both #12415 and #12490. Here, we revert that
change to the default value, so -p is no longer there by default.
The people that care to add -p may do so in their own build trees
by appending " -p" to the new cache variable COVERAGE_EXTRA_FLAGS.
dcd2459 Eclipse: better message when Eclipse version could not be determined
b4b2fc3 Eclipse: don't create VirtualFolders if not supported
5b200e3 Detect whether the current Eclipse version supports VirtualFolders
4974ec9 Eclipse generator: detect Eclipse version
41e2b1d Make add_compiler_export_flags a function again.
6a10deb Made ADD_COMPILER_EXPORT_FLAGS into a macro.
2d1acfe Don't warn when nothing to do in visibility function.
d679568 Just code style changes.
67fcc83 Simplify IntelVSImplicitPath detection project
a7ce26d Move IntelVSImplicitPath project to better location
539a822 Enable Fortran tests for IDE builds.
555f589 For VS Intel Fortran IDE builds, add a check to find the Fortran library PATH.
71402eb FortranCInterface: Compile separate Fortran lib in VerifyC[XX]
Making this a macro had unintended issues on (among others) Windows
compilers. Moving it back to being a function using PARENT_SCOPE still
satisfies the use case where we simply want to obtain the extra flags.
Use the ENV{LIB} variable directly instead of parsing the output of the
whole environment from "set". Store the output in a .cmake script and
include it from CMakeDetermineCompilerABI instead of using file(READ).
To use VS C and Fotran in the same solution, it is required that VS be
able to find the Fortran run time libraries as they will be implicitly
linked by any Fortran library used by VS C programs. This adds a check
into CMakeDetermineCompilerABI using a try-compile to find the correct
PATH.
The Intel Fortran plugin for Visual Studio requires Fortran source files
to be compiled in a separate target from C and C++ code. Compile the
VerifyFortran.f source file in a separate library and link the main
VerifyFortanC executable to it.
90efed6 Xcode: Honor Fortran_FORMAT target and source file property
5c0c635 Fortran: Add support for free- and fixed-form flags
47a0c75 VS: Map Fortran free- and fixed-format flags to IDE options
d6e2a06 VS: Map per-source Fortran flags to IDE options
1c2508a Use FIND_PACKAGE_HANDLE_STANDARD_ARGS second mode
d179500 Update documentation of FindPythonInterp.cmake
4fd1e28 Determine python version
20980ef Search for the installed python interpreter first
Re-fix problem exposed by recent commit to FindPythonInterp.
If the find "details" has new lines in it, then replace them
with the empty string so that the string may be saved as a
cache entry that can be re-read next time CMake runs.
Use REGEX REPLACE, and replace with an empty string, eliminating
the problem characters, so that we may easily extend this to
include additional problem characters in the future if necessary.
Currently the VS generators do not support Intel C/C++ .icproj files and
the MS tools do not include a Fortran compiler. Therefore we can always
set the C and CXX compiler IDs to "MSVC" and the Fortran ID to "Intel".
This fixes a regression in support for the Intel Fortran compiler under
the VS plugin introduced by commit cd43636c (Modernize Intel compiler
info on Windows, 2010-12-16). The commit moved the compiler information
into platform files that only load when the proper compiler id is set.
It worked for the NMake Makefiles generator but not for the VS IDE
generator because it did not set the compiler id.
6a6393c Don't use a variable name that might be used in other files.
5ca8c56 Fix up verbatim code sections of the dox.
75596e6 Don't start a line with a dash(-)
826374a Remove blank line at the start of the file.
8b9b8e1 Add documentation about the prefix and no_deprecated options.
51bc63a Fix the feature of using a specific prefix for macros.
3449f6b Add quotes in case cmake is installed in a prefix with a space.
36d28f2 Fix Compiler id variable name.
99b2aab Disable the tests for Watcom.
7ac0ab1 Quote paths in case there is a space in one of them.
89108b9 Look for errors reported by PGI too.
e0cc024 Add missing NO_EXPORT macro variant.
1b031d1 More consistency in the macro options.
03d60c7 Try to make the macros do almost nothing for Watcom.
6adeda9 Possibly fix configuration test on AIX.
e253348 Possibly fix test on HPUX.
32eff0c Test for too-old-intel compilers.
42154ec Fix up the regex command for Intel.
a147a06 Add some settings for non-truncation of test output.
bf73e75 Hopefully add version extraction for Intel.
aa4f0b6 Fix the version extraction regex for clang.
a493d1a Test the correct cxx variable.
b6ee2ee Comment the test assertion for now
a9a8b9e Exclude win32 from hidden visibility checks.
afae7a9 Start testing expected values for compiler flags.
1ae3365 Exclude PGI from exports and deprecated.
f426496 Exclude cygwin from the hidden visibility feature.
f84c7db Don't enable deprecated on old GCC
9672b33 Don't enable deprecated on HP.
10d8c44 Disable testing of deprecated macros.
97392a7d Fixup forgotten part of aed84517c92aeab4f Borland can't do deprecated.
c41c68b Try to error on deprecated on Intel and SunCC.
aed8451 Test for deprecated attribute before declspec.
c448b09 Perform the -Werror test only once.
fb88c6e Add some messaging output to make remaining issues findable.
01e9e98 Test -Werror instead of enabling it per compiler.
9aab2aa Expect the tests to pass if hidden visibilty is not enabled.
856bdb3 Don't change the expected build result based on the platform.
df4615e Add the COMPILER_HAS_DEPRECATED only if it has a declspec variant
78a6e1c Exclude the XL compiler from the hidden-visibility test.
e1f7ee3 Test for compiler features, instead of for specific platforms.
9554e10 Split the deprecated available check from setting macro values.
1590d5f Don't export methods on already exported classes.
750b67c Don't use hidden visibility on non-mingw windows either.
1f3be45 Make sure the hidden visibility variables never get set on MINGW.
399f415 Only set the deprecated attribute if hidden visibilty is enabled.
1c6b41b Remember to surround the other deprecated test in the Borland check.
3f7e036 Export deprecated free methods too.
7fa5592 Add some debug output to narrow down deprecation test issues
7924c1d Another attempt at fixing Borland.
50460ea Fix off-by-not in test for Borland.
b443459 Use the correct project name compiletest not compilefail
fc3772e Another attempt to fix the tests on Borland.
bab4a22 Disable all export macros on Borland.
cff9493 Only set the COMPILER_HAS_HIDDEN_VISIBILITY if GCC >= 4.2
af443b8 Set the CMAKE_RUNTIME_OUTPUT_DIRECTORY for windows builds.
61726f8 Only run the failure tests with gcc >= 4.2
002ddf2 Fix typo and tests failing as a result.
4443037 Fix tests with clang.
ffaa127 Test expected no-op instead of aborting the build.
6aca0e2 Short-circuit the tests on unsupported compilers.
d123bce Add some debug output.
3574b75 Simplify the compiler feature check
c7a937b Simplify. We already know we have hidden visibility at this point.
3b188c8 Test for features, not specific compilers.
4718233 Remove the fatal_warnings option which is no longer used.
b19911e Add missing licence header.
706ed2b Add a newline at the end of the file.
8963716 Add a newline at the end of the file.
def0a54 Handle the case where the user changes the DEFINE_SYMBOL property.
3088070 Add the GenerateExportMacro with unit tests.
FindBoost now attempts to find Boost using find_package(Boost NO_MODULE)
before it does a module mode search.
User can now set any of these to Boost's install prefix to detect it in module
or config mode:
- Boost_DIR for consistency with other CMake modules
- BOOST_ROOT or BOOSTROOT for adherence to boost convention
Define a "Fortran_FORMAT" target and source file property. Initialize
the target property from a "CMAKE_Fortran_FORMAT" variable. Interpret
values "FIXED" and "FREE" to indicate the source file format. Append
corresponding flags to the compiler command line.
- Build wasn't properly using -soname linker args, so installed libraries
could depend on relative paths from the build directory.
- Consolidated GNU linker args to one place in the BlueGeneP-base platform
file, since ld is used by both XL and GNU toolchains on BlueGene.
Linking broken on non-AIX machines when using XL compilers due to those
machines not using the CreateExportList tool. Made use of this tool
conditional on finding it.
59238dc Fix --find-package mode on Cygwin, where enable_language(RC) is called
98472e4 Require the current cmake version in --find-package mode
a6ccf3c Use $(CXXFLAGS) and $(LDFLAGS) in the --find-package test Makefile
4386918 Fix line length
7d69310 Only enable the test when using GNU make
3011149 Make the test harder by always having a space in the include dirs
ab57ff6 Make the --find-package test harder
626fc71 Much improved test, should now be executed on all UNIXes
ec6982d Disable any STATUS output in --find-package mode
e552ae7 Dont check for -isysroot and -mmacosx-version on OSX in --find-package mode
e589589 Rename helper macros print_compile_flags() to set_compile_flags_var()
aecfc1f Fix test on OpenBSD with BSD make
6bb4ca3 The makefile for the test was kindof wrong
fd15b5e Only run the test if we are using a makefile generator under UNIX
9fc87c6 Add a test for the new --find-package mode
d3ae0ff Improve documentation for --find-package mode
bf07375 Add a cmake.m4 for using cmake in autoconf projects instead of pkgconfig
b0e3578 Use the file-utility to test for 64bit if there is no /usr/lib64
53edfb2 Better support for lib64 and Debian multiarch
b8fdaa1 Fix copyright notice in new CMakeFindPackageMode.cmake
7690edf Replace cmake::GetScriptMode() with GetWorkingMode()
e4f603b Implement find-package mode of cmake
a91d662 Add find-package mode, which does nothing yet
b976e70 Make clLocalGenerator::GetTargetFlags() public
920a046 QtAutomoc: Eliminate compiler warning
b00463f QtAutomoc test: Pass QT_QMAKE_EXECUTABLE
e78ce44 Fix automoc with VS builds: apply patch from Bill
71165e9 Silence warning in automoc: use long instead of int
1879bcc Fix build: use std::ios::out|ios::trunc instead of std::ios_base::out
678e124 Only enable the automoc test after checking that Qt4 works
71c29d1 Fix bootstrap test with automoc
afb3edc Fix warnings
add30e9 Fix build: non-void function must return a value
7e6d845 Automoc.cmake is not needed anymore
2963d0b Fix logic which decides when to execute automoc test
77a5c6e Add documentation for AUTOMOC, add initialization via CMAKE_AUTOMOC
bf8ef77 Add a test for automoc
d045fd4 Nicer progress message for the automoc target
50cd6ce Move automoc processing from add_executable/library to cmGlobalGenerator
cbaac2a Remove trailing whitespace
c27607b Refactor SetupAutomocTarget() so it can be run after creating the target
24d9b7d Remove trailing whitespace
58b7fe6 Use cout instead of printf()
72caf4d Add the generated automoc.cpp file to the cleaned files
ddb517d Color output when running moc
9303295 Initialize verbose based onb the env.var.
ace1215 Move code for parsing a cpp-file from the big loop to separate function
735a5bb Fix line lengths
83b730c Add AUTOMOC to the add_library() command
126c6ea Add the cmake module required currently for automoc
de91feb Remove the need to check for .h/.cxx during buildtime
d65689a Add actual automoc code from automoc
d1c0a5f Start implementing skeleton for automoc in cmake
a65011b Start work on automoc: add empty cmQtAutomoc class
Fix problem exposed by recent commit to FindPythonInterp.
If the find "details" has new lines in it, then replace them
with literal "\n" two character sequences so that the string
may be saved as a cache entry that can be re-read next time
CMake runs.
Using the second mode of FIND_PACKAGE_HANDLE_STANDARD_ARGS allows for
checking the version number. Now a user can require a minimum version of
the python interpreter with find_package(PythonInterp VERSION)
The old approach to determine the python executeable chooses the newest
version from _Python_VERSIONS if no additonal versions are passed.
With python it is possible to install different versions side-by-side.
Therefore a user can install e.g. python 2.5 and 2.7. Python 2.7 maybe
only installed for testing new features and 2.5 for building and running
his software. Thus the default installation for the user would be python
2.5 and then returning PYTHON_EXECUTEABLE python2.7 would be wrong. The
new approuch searches first for the the default python executable e.g.
/usr/bin/python on unix and if it can't be found _Python_VERSIONS is
used.
In --find-package mode we can't enable a language, since a lot of
stuff has not been set up, e.g. which make tool to use.
So disable enable_language() in this mode.
Alex
The test "complex" sets the variable CMAKE_BACKWARDS_COMPATIBILITY
to 1.4. When that variable is set, configure_file does not default
to IMMEDIATE mode processing. And so, the output file likely does
not exist yet by the time the next line in the CMakeLists.txt file
is processed. When that next line is "try_compile" on that file,
this is a problem.
Fix the problem by explicitly using IMMEDIATE in the configure_file
call.
This problem was quite mysterious, as it only showed up on the
"complex" test, when the previous commit introduced a CheckSymbolExists
call into the FindThreads module. Which is not even explicitly included
in the "complex" test... FindThreads gets included indirectly only
as a side effect of setting CMAKE_BACKWARDS_COMPATIBILITY to 1.4 and
even then it's included indirectly by auto-inclusion of
CMakeBackwardCompatibilityC.cmake...
Wow. Just wow.
This fixes the problem that otherwise Platforms/CYGWIN.cmake doesn't
know whether it should set WIN32 or not.
Now it uses always the current behaviour.
Alex
QNX has the phtread stuff in the standard library. The best way would
IMHO be to check if a program that uses pthread_* can be successfully
linked without specifying any linker option before trying out the
different flags.
To support Intel Fortran, CMake started using devenv and VCExpress
for build tools with VS2010. However, VCExpress does not always work.
This change makes CMake use MSBuild when devenv is not found. This should
be OK, since Intel Fortran can not be used with VCExpress.
c9761de Improve documentation for WriteBasicConfigVersionFile.cmake
208bb90 Set UNSUITABLE instead of not COMPATIBLE
bb03c2d Really fix copyright notice
d50a61a Fix copyright notice
4ba09bc Add some tests for write_basic_config_version_file()
02b1e4b Add example to documentation
d216a67 Provide macro write_basic_config_version_file()
If CMAKE_SIZEOF_VOID_P is not set from the outside, it checks for the
existance of /usr/lib64, and if it exists, SIZEOF_VOID_P is set to 8.
For multiarch, if this is debian and
CMAKE_${LANGUAGE}_LANGUAGE_ARCHITECTURE has not been set, it globs
for the files in /lib, and uses the first one which matches
CMAKE_LIBRARY_ARCHITECTURE_REGEX.
Alex
Commit 6d434ee6 (Split XL compiler information files, 2009-09-30)
added Platform/AIX-(XL|VisualAge)-(C|CXX|Fortran).cmake modules
to support the old and new compiler branding for all languages.
Add the "AIX-VisualAge-Fortran" combination that was left out
accidentally.
e2e8c0a Also put builtin include dirs into CodeBlocks project file
92c0dc5 Remove useless line of code
a5683f8 Patch by Campbell Barton: puts definitions into C::B project file
81a70c6 Add basic version check for giflib
2462f65 FindGif: add giflib4 as one more name for the library under Windows
f97620e FindGIF/FindFreetype.cmake: remove standard search paths from find-calls
7c38523 Strip trailing whitespace
825c457 FindPostgreSQL: fix PATH_SUFFIXES, better output for FPHSA
e159bb5 Mark the results from find() as advanced
da1bdaf Use FPHSA(), remove unnecessary stuff and don't recommend link_directories()
217d068 More PATH_SUFFIXES for finding Postgresql and also search catalog/pg_type.h
b62349c FeatureSummary.cmake: update documentation
f366cf8 FeatureSummary.cmake: cosmetics
f407bb5 FeatureSummary.cmake: only higher TYPEs can override previous TYPEs
02d47ab FeatureSummary.cmake: error out when a REQUIRED package is missing
91a1527 FeatureSummary.cmake: add INCLUDE_QUIET_PACKAGES keyword
0671a02 FeatureSummary.cmake: remove "comment" field
aae13f4 Extend FeatureSummary: add PURPOSE of package and TYPE
Refactor code from CMakeFindEclipseCDT4.cmake so it can be used
alkso for CodeBlocks, and move it into new file
CMakeExtraGeneratorDetermineCompilerMacrosAndIncludeDirs.cmake.
Alex
This is used e.g. in KDE, there on Solaris an old version of giflib
was found (version 3), which could be detected by checking for the
UserData member variable:
http://websvn.kde.org/?view=revision&revision=545738
Alex
This macro can be used to generate basic version files which can be
installed along a Config.cmake file to provide versioning support.
This (3rd try) is implemented using a macro, which maps
the COMPATIBILITY mode to a filename and configure_file()s the
resulting file.
Alex
Fix NSIS template to more thoroughly use CPACK_PACKAGE_INSTALL_REGISTRY_KEY.
This allows different versions of software to have a separate sections in the
registry to keep track of things (installed components, and uninstall stuff).
Change default of CPACK_PACKAGE_INSTALL_REGISTRY_KEY to follow the value of
CPACK_PACKAGE_INSTALL_DIRECTORY so if an installation overwrites another installation,
the proper registry entries are more likely to be overwritten.
Fix CPack/NSIS generator to not insert code in the NSIS template to skip installation
of already installed components. This enables a repair like behavior and also enables
installing patch releases on top of an older installation.
Allows wlib to generate proper exports if two routines have
the same spelling, but different case (like Scale and scale).
Thanks to J Decker for the patch.
On Apple's gcc, the compiler emits a warning such as "warning: command
line option "-Wno-deprecated" is valid for C++/ObjC++ but not for C"
when it is passed that flag on its command line.
When testing for that flag with a plain C file, we should report that
the flag is unsupported for C files. The new FAIL_REGEX option added
here produces this behavior.
In both files find_path() and find_library() are called with multiple
additional search PATHS which are already anyway part of the default
search dirs, so it should be safe to remove them.
Alex
1417a55 Java: Fix documentation format and indentation
0b7627d Java: Use set_property/get_property for target variables.
b01a505 Java: Create correct jar archive dependencies.
f99c312 Java: Added some dependency magic to avoid recompilations.
f3233ba Java: Create java_class_filelist only if it does't exist.
a22ed3d Tests: Check for the new Java exeutable variables.
c177c8e Tests: Java tests should test UseJava.cmake
5c2106c Modules: Added CMake Java support.
a4b6275 FindJava: Find missing java development executables.
Now found packages are not stored in ENABLED/DISABLED_FEATURES
anymore, but always in PACKAGES_FOUND/NOT_FOUND.
ENABLED/DISABLED_FEATURES is now only used via
ADD_FEATURE_INFO(), e.g. for stuff set via option().
Alex
What was given as comment to set_package_info(), now goes into
the PURPOSE field. It was not clear what the comment should contain,
with the PURPOSE this is much clearer now.
Alex
With the PURPOSE a project can state what the package in question
is used for in the project (as opposed to describing what the package
does in general).
TYPE can be one of OPTIONAL (default)
RUNTIME - not needed for building, only at runtime
RECOMMENDED - as OPTIONAL, but you should really have it
REQUIRED - cmake will fail if one of these is not found
This can be set using the new function set_package_properties()
Alex
This patch adds two macros cmake_push_check_state() and
cmake_pop_check_state(), which can be used to save and restore
the contents of the CMAKE_REQUIRED_xxx variables.
Alex
In find-package mode, cmake executes Modules/CMakeFindPackage.cmake,
which calls find_package(), and this is then evaluated in cmake.cxx,
which prints an appropriate message to stdout, so it can be used
e.g. in a normal Makefile:
$ /opt/cmake-HEAD/bin/cmake --find-package -DNAME=JPEG
-DCOMPILER_ID=GNU -DLANGUAGE=C -DMODE=EXIST
JPEG found.
$ /opt/cmake-HEAD/bin/cmake --find-package -DNAME=JPEG
-DCOMPILER_ID=GNU -DLANGUAGE=C -DMODE=COMPILE
$ /opt/cmake-HEAD/bin/cmake --find-package -DNAME=JPEG
-DCOMPILER_ID=GNU -DLANGUAGE=C -DMODE=LINK
-rdynamic -ljpeg
Alex
This reverts commit 1088b0278e.
Wrapper dependency scanning (fix for #4147) does not work at CMake
configuration time if an input file is provided by a custom command
(regression #12307). Revert to original behavior until a solution is
found.
8555c2b Look for VCExpress as a possible build tool as well as devenv.
ed0075b Use relative paths for custom command inputs.
38368d5 Revert "With very long file names, VS 2010 was unable to compile files."
8cd66dc Use devenv instead of msbuild for vs2010.
If FindMPI can't interrogate any of the available compilers, it attempts to compile simple MPI
programs with CMAKE_${lang}_COMPILER. If this works, it uses that as MPI_${lang}_COMPILER.
This allows MPI to be discovered on Cray XT/XE systems, where modules are used and cc, CC, and ftn
compilers *are* MPI compilers.
Without this, regular swig (not 2.0) executable is not found
automatically.
Commit 55b7c87e (Add support for new swig 2.0 application, 2011-03-28)
added support for finding swig 2.0 at the (accidental) expense of not
finding 1.x. Fix this regression.
Patch from Aaron C. Meadows
Adds support for detecting VS 2010 SP1
Also improves performance using CMAKE_CXX_COMPILER if it is available
and for robustness falls back using try_compile() and try_run()
1ed19bc multiarch: Set CMAKE_LIBRARY_ARCHITECTURE_REGEX for Linux|Hurd|kFreeBSD
52a6ed2 Test find_package multiarch support (#12037)
b41ad3b Teach find_(library|package) about Linux multiarch (#12037)
Fix typo introduced by commit e28c16b4 (Split GNU compiler information
files, 2009-12-02).
Reported-by: Campbell Barton <ideasman42@gmail.com>
Suggested-by: Michael Hertling <mhertling@online.de>
* Fix linux CMAKE_LIBRARY_ARCHITECTURE_REGEX to support armel-linux-gnueabi.
* Add CMAKE_LIBRARY_ARCHITECTURE_REGEX on kFreeBSD.
* Add CMAKE_LIBRARY_ARCHITECTURE_REGEX on GNU (Hurd).
Also regex is improved to support quadlets. Even if I have not seen this
in the wild yet, reportedly they are possible.
Workaround an issue where users wanted to use Boost_LIBRARIES with the
install() command and debug/optimized keywords were interfering. Now
debug/optimized keywords are removed if the release & debug library
are the same.
Implement support for multiarch as specified here:
http://wiki.debian.org/Multiarchhttps://wiki.ubuntu.com/MultiarchSpec
Detect the <arch> part of <prefix>/lib/<arch> from the implicit library
search path from each compiler to set CMAKE_<lang>_LIBRARY_ARCHITECTURE.
Define CMAKE_LIBRARY_ARCHITECTURE using one of these values (they should
all be the same). Teach the find_library and find_package commands to
search <prefix>/lib/<arch> whenever they would search <prefix>/lib.
51e16c0 BundleUtilities: Avoid test on Watcom dashboards (#12034)
41f962a Revert "BundleUtilities: Run test on Windows if either MSVC or dumpbin was found."
e17135e BundleUtilities: Add rpath to loadable modules in test.
8064044 BundleUtilities: Print reason for not loading module.so
f3de459 BundleUtilities: Run test on Windows if either MSVC or dumpbin was found.
900bf98 BundleUtilities: Disable running test on Windows unless using MSVC.
fa4dc08 BundleUtilities: Fix issues with custom target DEPENDS in test (#12034)
e40b79e BundleUtilities: Fix test when using xcode (#12034)
b68d3dc BundleUtilities: Fix regex to extract dependents from ldd (#12034)
7ac7b43 BundleUtilities: Work w/ non .app exes on Mac (#12034)
When the path to "resolved_embedded_item" was shorter than
the path to the bundle being fixed up, fixup_bundle would
fail with a cmake error like:
"string end index: 110 is out of range 0 - 85"
Detect when the path of resolved_embedded_item is too short
to be embedded in the bundle, and report the proper error
message, so the poor developer reading it has a snowball's
chance of actually fixing the issue.
517837f Fix , to - in Copyright message so it passes CMake.ModuleNotices test
162f3fb Merge branch 'master' of git://public.kitware.com/cmake into 12128_FindProtobuf_module_behavior_under_Windows_is_annoying
ca000a0 FindProtobuf: Better MSVC support, Searching for protobuf lite
e38216c Remove unnecessary mark_as_advanced from FindHDF5.
93ba19e FindHDF5 ensures good link lines when libraries are duplicated.
0584701 Fix for bug 11752, mixed debug and release libraries.
4e12284 Use HDF5_FOUND to control autoconf and CMake built FindHDF5.
2ba826e Use CMAKE_CURRENT_LIST_DIR to locate FindPackageHandleStandardArgs.
3978f32 Add logic for CMake built HDF5 install.
063ac87 HDF5 high level library is a find COMPONENT now.
34ea179 Modified the FindHDF5.cmake file to locate the Fortran bindings.
Also add a test of BundleUtilities including an exe,
some shared libs, a plugin, and a framework-style lib.
This test presently runs (and this functionality works)
on Linux, Mac and Windows.
For now, the framework-style lib is built as a plain old
shared lib because there is another yet-unresolved issue
with local frameworks without rpaths on the Mac.
Add support for finding debug libraries
Add support for searching Google provided MSVC project dir structure for libs
Add support for finding Protobuf "Lite" libraries
cdc2b41 Fix CompileCommandOutput test build on Windows
7039d1f Fix CompileCommandOutput test for Make tools not supporting spaces
4268e3d run_compile_commands: Cast istream::get() result to char
c45c60b run_compile_commands: Avoid extra stl vector conversion
7c5be51 run_compile_commands: Avoid shadow in std::map<>::at workaround
169bb05 Provide std::map<>::at for use in run_compile_commands
4e2185c Make std::map usage more portable in language=>flags/defines maps
a7e7a04 Fix run_compile_commands build on Apple GCC 3.3
c9174c0 Fix signed/unsigned comparison in EscapeJSON
8346a28 Only offer the compile command output feature on unix systems
0e6b05f Adds a test for the compile command line output.
5674844 make compile command output optional
fe07b05 implement cxx command output
65c0c24 cache flags and defines
3f064ef refactor flags and defines
8bd3e51 Absoft: Enable FortranCInterface check in Fortran test
d7b376b Absoft: Detect implicit link libraries on Linux and Mac
ac5b999 Add Absoft Fortran compiler id and basic flags
Use the "-X -v" flag to the Absoft front-end to pass "-v" to the gcc it
invokes under the hood. Teach CMakeParseImplicitLinkInfo to exclude
linker version lines from consideration as link lines. Fix parsing of
Sun's linker search path option "-Y..." to avoid conflict with the Mac
linker option "-Y<num>".
The find module calls find_package( HDF5 QUIET NO_MODULE ). If that succeeds,
the find module variables are set based on the imported target locations.
The HDF5 high level library was originally hard coded as a dependency when the C
bindings are desired. The high level API is now requested as a COMPONENT.
a55da06 Added backward compatibility for input as well as output vars.
a32a633 FindMPI: Fix documentation formatting
706b73e FindMPI: Handle multiple languages
Users can now supply MPI_COMPILER, MPI_INCLUDE_PATH, MPI_LIBRARY,
and others as with the old FindMPI. These are mapped to their
respective equivalents for C and CXX. Fortran is not touched, as
there was no Fortran support in the old FindMPI.
The custom error message that mentions PREFIX/lib/InsightToolkit is not
accurate for ITKv4. Just use the more generic message that find_package
generates by default. This module is now almost a no-op but exists to
tell find_package to look for the InsightToolkit name as well as ITK.
The previous commit added --non-interactive as a "side effect"
of turning on SVN_TRUST_CERT. While reviewing that commit, we
decided all ExternalProject svn usage should be non-interactive.
That way, if there's any sort of problem, svn will return an
error right away rather than hang forever waiting for input...
Which adds --non-interactive and --trust-server-cert to the svn
checkout and update command lines. This allows ExternalProject
clients to pull from an https:// based svn server even though
the server may not have a valid or trusted certificate.
Caveat emptor: I would NOT recommend using this except as a
short-term work-around. Rather, the server should have a valid,
trusted certificate, or the client should be using "http" instead
of "https".
This commit fixes BUG: 0011782. UseSWIG would be using the same variable
to declare module information. The problem would only be noticed in parallel builds
Fix this variable declaration by properly resetting it.
This commit fixes BUG: 0011215 by properly expanding $(OutDir)
Instead of creating the output directory using file(MAKE_DIRECTORY)
we use cmake -E to create the directory at execution time
This commit fixes BUG: 0004147 it directly uses swig executable
to compute a list of dependencies directly from the .i files
to make sure to rebuild the swig module any of its direct dep.
is touched
The XL toolchain supports shared object files stored in archives. Since
CMake lists libraries on link lines by full path it is common for a
shared library link line to contain the path to an archive file.
When linking a shared library the compiler front-end by default runs
CreateExportList to construct the list of symbols to be exported.
Unfortunately it passes all files found on the command line to the tool
so archive and library files get processed along with the object files.
The tool returns a list of all symbols in all objects, archives, and
libraries on the command line. This causes the linker to copy every
object file out of every archive into the shared library whether they
are dependencies of the original object files or not.
Work around this problem by running CreateExportList ourselves with just
the original object files intended for inclusion in the shared library.
Then pass the list it produces on the link line to prevent the compiler
front-end from constructing its own. This tells the linker to export
only the symbols provided by the original source files of the shared
library.
Factor duplicate information out of Compiler/XL-<lang>.cmake modules
into a macro in a new Compiler/XL.cmake module. Invoke it from the
per-language files to produce the original settings.
Since commit e1729238 (Add initial XL C compiler flags for safer builds,
2009-09-30) CMake sets the initial XL C flags to include "-qthreaded"
and "-qhalt=e". Do the same for C++ and Fortran with this toolchain.
112f1dd FindOpenSSL: Use find_package_handle_standard_args for version check.
a091ba6 FindOpenSSL: Fixed crypto und ssl variable names.
a164649 FindOpenSSL: We should only use hints to find OpenSSL.
0fb5142 FindOpenSSL: Added support for pkg-config.
The command generating the jar file depends on java_class_filelist which
is generated by another command.
Signed-off-by: Andreas Schneider <asn@cryptomilk.org>
Compile java sources within a custom_command using automatically checked
file dependencies and create java_class_filelist after java compile.
Signed-off-by: Andreas Schneider <asn@cryptomilk.org>
The regex was slightly wrong, it excluded the last line, so e.g.
/usr/include/ didn't end up in the .cproject file.
Thanks to Shash Chatterjee for the patch.
Alex
The AMD64 ABI document http://www.x86-64.org/documentation/abi.pdf
does specify that 64bits binary libraries should end up in <prefix>/lib64
and 32bits ones in <prefix>/lib. All but debian based distros do so,
and some like OpenSUSE even enforce the rule when packaging with RPM
and refuse to build the RPM if this is not the case.
After some discussion (see the bug notes) we cannot do that behind
the scene and the current fix supposes that the user shall use
the CMAKE_INSTALL_LIBDIR variables content in its INSTALL rules if
he wants to put the lib in the right place. CMAKE_INSTALL_LIBDIR
shall have the appropriate value depending on the Linux distribution
found and 32/64bitness of the host.
The cross-compiling case (even 32bits compile on a 64bits host)
is not handled.
The Cray Fortran compiler started using module init symbols in version 7.3.2.
Starting in commit 71287734 (Teach FortranC interface for Intel, PGI, and gcc
4.2, 2009-08-05) we provide C versions of the module init symbols so that the
detection executable can link when the C versions of the module-mangled symbols
are picked up.
If no C module-mangled symbol matches then we cannot let the C module init
symbol appear because it will be duplicated by the Fortran copy that provides
the module-mangled symbol. This was first handled for the PathScale compiler
in commit 21faaa5d (FortranCInterface: Fix PathScale detection, 2010-01-22) and
commit 46858720 (FortranCInterface: Fix PathScale detection again, 2010-02-16).
Handle it now for the Cray compiler too.
86cb17b Pass include directories with response files to GNU on Windows
9a0b9bc Optionally pass include directories with response files
6e8a67f Generate target-wide flags before individual build rules
d099546 Factor old-style -D flags out from -I flag generation
Also, comment out all "debugging" calls to message() that helped
us interpret the output on other platforms when running on the
dashboard clients.
Using ERROR_QUIET avoids unnecessary stderr output while calling
external tools to determine the processor count. If there's an
error parsing the output, we set the count to 0 anyhow.
Also, the test will fail on a CMake dashboard run if the count
comes back equal to 0.
Now that the code is "done"-ish, remove the debugging output.
Expect no output on stdout or stderr when calling the
ProcessorCount function from now on.
This check if the function exists and the prototype we want to use is
correct. There are still functions which have different prototypes on
different UNIX systems.
The GNU 4.x toolchain on MinGW (and therefore MSYS) allows compiler
options to be passed via response files. Use this to pass include
directory -I options. This allows the include file search path to be
very long despite shell and mingw32-make command line length limits.
Adjust whitespace to make the output of "--help-module FindMPI" look
good. Also separate the comment containing the copyright and license
notice so it does not appear in the documentation.
Adds support for:
- MPI_<lang>_COMPILER and other useful variables for C, CXX, Fortran
- Better compiler interrogation (handles mvapich)
- Supports specifying an MPI compiler name directly on the command line
without and absolute path, e.g.: cmake -D MPI_CXX_COMPILER=mpixlC
- Better compiler name searching tries to match MPI compiler to regular
CMAKE_<lang>_COMPILER_ID, if it's available.
Gets rid of:
- MPI_LIBRARY, MPI_EXTRA_LIBRARY cache variables. These and other old
vars are still exported for backward compatibility, but they're not
cached.
Also, add message output (temporarily) for gathering data
on all the dashboard machines. After the test runs on the
overnight dashboards tonight, I'll comment out the message
output and commit/push again.
Credit goes to David Cole ( http://www.kitware.com/blog/home/post/63 ).
Also add a script-based test of the new module.
Signed-off-by: Michael Wild <themiwi@users.sourceforge.net>
ade04de Remove debbuging typo
a201028 CPack try to please SUSE 64 bits and install lib in lib64 and not lib.
7ebbcf1 CPackRPM non matching ENDIF
0e07b42 CPackRPM even more trace in debug mode or in case of failure
564b731 CPackRPM add more trace output in order to help failing diagnostics
b3ce420 Do not bother enabling C++ in Assembler test
80f6a34 Teach Assembler test to generate main.s at build time
1dafa74 Fix Assembler test to parse C flags string before using
4139a73 -only enable the asm test for the Intel compiler if we are under UNIX
1f6c6b1 -use CMAKE_C_FLAGS when generating the assembler file
d0f71e2 Add ASM platform information for HP compiler on HP
bd580be Merge branch 'hp-compiler-info' into ReworkedAsmSupport
a0bab7a Add ASM platform information for XL compiler on AIX
c03b610 Merge branch 'aix-xl-platform-info' into ReworkedAsmSupport
c623008 Initialize ASM rpath flags for executables with those for shared libs
17c658f Add support for the Intel compiler used for ASM under Windows
4258b24 Add more regex for gcc, always print the ASM compiler ID
9071b8b Add temporary debug output for compiler ID detection for ASM
48f7199 It's ELSEIF(), not ELSIF()
d103c75 Fix bad comparison in the detect assembler-code
20fe0be Only try assembler support for Makefile-based generators
8614470 Use a regexp instead a lot of ORs for checking the compiler ID
cf88092 The Assembler test now tests ASM for GNU, Intel, HP, XL and SunPro
66614a8 Add assemble- and preprocess commands for HP
78f7c59 Fix the default CMAKE_ASM_COMPILE_OBJECT, make XL-ASM use it
7456461 Change the default rules so they fit better to the new ASM handling
5542d58 Set the HP asm file suffix
f745220 Add support for ASm for the HP compiler.
00735d4 Add suport for ASM for the IBM XL compiler
d3e9e8a Add support for ASM for the SunPro compiler
64e66eb Actually use CMAKE_ASM_COMPILER for asm, instead of CMAKE_C_COMPILER
38f92bf Add ASM support for the Intel compiler
4b40d42 Rework the way assembler is handled, use the C/CXX compiler by default
Move HP flags out of Platform/HP-UX.cmake into platform-specific
compiler information files "Platform/HP-UX-HP-<lang>.cmake". Factor
common values into "Platform/HP-UX-HP.cmake" and load it from the
per-language files.
Since the flags for executables are almost always the same as those for
shared libraries each language information file just uses the latter for
the former by default. This reduces duplication in the compiler and
platform flag information files.
Move RPATH flags out of Platform/AIX.cmake into platform-specific
compiler information files Platform/AIX-XL and Platform/AIX-GNU.
The flags need to be set for each compiler of each language.
CMAKE_ASM_COMPILE_OBJECT is now so that it fits for GNU, Intel, HP and Sun
ASM_ATT had to be adjusted. Also adjusted the default
CMAKE_ASM_LINK_EXECUTABLE
Alex
Commit 6a61a8a5 (Honor module .def files with MinGW tools, 2011-02-21)
set CMAKE_LINK_DEF_FILE_FLAG to "-Wl," to enable passing .def files to
the linker on MinGW. However, older GNU tools in the MSYS shell do not
know how to translate "-Wl,/c/..." to "c:/..." and complain that the
file does not exist. Instead set the flag to just "" which tells CMake
it can pass the file through the front-end with no special flag.
7a1027a When checking find_package() components, special case qtmain.
4c1c358 FindQt4: Include builtin FindPackageHandleStandardArgs directly
43cb9b8 Change to use fphsa to check required variables and version.
Since commit 024d05ad (Fix use of module .def files for MS tools,
2009-09-29) module .def files work for any platform that sets
CMAKE_LINK_DEF_FILE_FLAG correctly. Set it in the Windows-GNU platform
information file to enable support with MinGW tools. Also enable the
test added by commit 0db2c850 (Test use of module .def files for MS
tools, 2009-09-29) for MinGW and MSYS generators.
When initializing CMAKE_(EXE|SHARED|MODULE)_LINKER_FLAGS from LDFLAGS
and CMAKE_(EXE|SHARED|MODULE)_LINKER_FLAGS_INIT quote the whole string
in case both are set.
Reported-by: Daniel R. Gomez <gomez@teragram.com>
Clients may define CTEST_TEST_TARGET_ALIAS in a project's
initial cache to get a target of another name that executes
the same underlying command as "make test"
When running
$ mpif77 -c example.f -o example.f.o
mpif77 recognizes -o and produces example.f.o, but when running
$ mpif77 -o example.f.o -c example.f
the -o option is ignored and the object file is example.o. Performing
the same experiment on the underlying compiler tool or with the mpicc
and mpiCC wrappers does not exhibit this behavior, so the issue appears
to be specific to mpif77.
Reported-by: Zhen Wang <zwang26@emory.edu>
This commit changes the way how the assembler support works in cmake.
The language "ASM" now always uses the C/Cxx compiler instead
of the assembler directly. This fixes#8392, assembler files are
not preprocessed.
If one wants to use the assembler directly, the specific
assembler "dialect" has to be enabled. I.e. to get as/gas,
you have to use now ASM-ATT, the same way for ASM_MASM and ASM_NASM.
Implemented this now for gcc.
SunStudio, IBM, HP and Intel still todo.
Alex
dd2f814 Merge branch 'dev/add_test-working-directory' into dev/strict-mode
949d32c Unwatch manual variables upon removal in cmake-gui
3939032 Unwatch manual variables upon removal in ccmake
8354413 Add method to unwatch a manual variable
8ed3c85 Give a better message for unused variables
729db48 Fix ArgumentExpansion test expected results
89c2544 Checking for a definition is a usage
5625dee Don't output to stderr in the GUI
ad25a96 Merge branch 'ImprovedDotSupport2' into dev/strict-mode
c128abe Merge branch 'AddCMAKE_CURRENT_LIST_DIR' into dev/strict-mode
9bcaff0 Merge branch 'cmake-guiRememberAdvancedCheckbox' into dev/strict-mode
544d0c3 Fix expected output for WarnUninitialized test
4e3bea4 Update expected messages to new format
8e8c9e4 Don't check at destruction for usage
668e005 Use cmake::IssueMessage for warnings
88cd4c1 Use 'CMake Warning' versus 'warning' for CDash
3c3b98d Initialize the class before setting warn flags
cf8b15a Ignore files under the CMakeFiles directory
fd50f06 Don't check for unused vars at configure time
447a04c Don't warn during configure when doing everything
b97ee21 Check for unused variables at the end of generate
c18c977 When checking for variables, specify a reason
3f1121f Use a long int since Line is a long as well
2507f93 Change the failure case string to 'Unexpected'
fe390a2 Add 'ArgumentExpansion' test
8dbb209 Wrong boolean value for CLI warnings
d4ee998 Hard-code the --no-warn-unused-cli flag
a267b99 Fix line lengths
82ed104 Flag that the directories have been set
5aa535b Add argument to arg parsing to not set directories
367e5c3 Revert "Revert "When calling CMake, set the args and the cache""
ab5d4e4 Revert "When calling CMake, set the args and the cache"
9b90040 When calling CMake, set the args and the cache
fe56002 Fix long lines for KWStyle
5d30cfc Set a watch on variables added through the gui
33c63b1 Add a method to put a watch for variables
535253f Initialize the warning variables earlier
cbb286c Fix the path detection to work for top-level
62be1f7 Initialize the usage stack earlier
c6e7fab Factor out the checks for unused variables
5e41ba8 When using the API, check for Add vs. Remove
dee1976 Fix typo in VariableUnusedViaUnset test
f231ce5 Remove old false positive avoidance code
a117e02 Revert "Add test for unused warnings at the end of scope"
2c82f2b Exempt CMAKE(CURRENT|PARENT)_LIST_FILE from usage
6d7d449 Ignore CLI warnings for ABI determination
7740a73 Only return local keys that are defined
bef3aee Use the API so that warnings can be tracked
05cb0f4 Check for unused variables in the dtor
91c4c99 Add test for unused warnings at the end of scope
ca90f67 Fix detection of unused variables when setting
f7438ca Add test for unused detection via setting it
995cfb0 Don't warn if the variable wasn't defined
aefc91d Add test for usage checks via unset
a8e97f8 Remove VarRemoved code since it's been superceded
59463ef Rework CheckVariableForUnused usage
f117423 Fix line lengths to be no more than 78
e49a935 Improve unused warning logic
e01e40c Mark ARGC, ARGV*, and ARGN as used
a17aff7 Ignore CMAKE_MATCH_* variables for usage
02a114d Add method to allow variables to be marked as used
a0b0d23 CMAKE_DO_TRY_COMPILE is no longer used
ae3eff3 Fix the path used for ignoring system warnings
056b441 Fix missing case for usage of a variable
980e048 Factor out checks for unused variables
83acb0a Remove now unused variables
3801463 Use built-ins for readability and maintainability
8b52015 Push the initialize and unused states when copying
439877f Be consistent with single and double quotes
4cf1706 Add documentation for check-system-vars
b74777f Fix the spelling of the flag for warn-unused-vars
b948120 Change logic of flag to turn off cli unused checks
f047a17 Add test for uninitialized variables
75bda38 Add tests for unused command line variables
300fc15 Fix detection of system files
d784e6a Run the unused variables check on the final pass
9efc057 VariableWatch is not available when bootstrapping
2e78224 Add a missing comma to the warning message
7499700 Add a flag to warn about system files
fff9f6d Rename flags again and use variablewatch for cli
786e269 Add warn-unused to the Qt interface
636e6c4 Default to marking things as used
4ff0340 Rename find-unused to warn-unused
d7999e9 Rename strict-mode to warn-uninitialized
e141bc9 Detect unused variables
d3e8eb5 Add flags to detect unused variables
f332e14 Complete strict-mode checks for uninitialized vars
52f9637 Add method to get the local scope variables
f794d58 Make --strict-mode option, and integrate with cmake-gui
48b5b85 Add a warning when variables are used uninitialized.
cd626ea For macros make sure the FilePath points to a valid pointer in the args.
The FindPackageHandleStandardArgs module was originally created outside
of CMake. It was added for CMake 2.6.0 by commit e118a627 (add a macro
FIND_PACKAGE_HANDLE_STANDARD_ARGS..., 2007-07-18). However, it also
proliferated into a number of other projects that at the time required
only CMake 2.4 and thus could not depend on CMake to provide the module.
CMake's own find modules started using the module in commit b5f656e0
(use the new FIND_PACKAGE_HANDLE_STANDARD_ARGS in some of the FindXXX
modules..., 2007-07-18).
Then commit d358cf5c (add 2nd, more powerful mode to
find_package_handle_standard_args, 2010-07-29) added a new feature to
the interface of the module that was fully optional and backward
compatible with all existing users of the module. Later commit 5f183caa
(FindZLIB: use the FPHSA version mode, 2010-08-04) and others shortly
thereafter started using the new interface in CMake's own find modules.
This change was also backward compatible because it was only an
implementation detail within each module.
Unforutnately these changes introduced a problem for projects that still
have an old copy of FindPackageHandleStandardArgs in CMAKE_MODULE_PATH.
When any such project uses one of CMake's builtin find modules the line
include(FindPackageHandleStandardArgs)
loads the copy from the project which does not have the new interface!
Then the including find module tries to use the new interface with the
old module and fails.
Whether this breakage can be considered a backward incompatible change
in CMake is debatable. The situation is analagous to copying a standard
library header from one version of a compiler into a project and then
observing problems when the next version of the compiler reports errors
in its other headers that depend on its new version of the original
header. Nevertheless it is a change to CMake that causes problems for
projects that worked with previous versions.
This problem was discovered during the 2.8.3 release candidate cycle.
It is an instance of a more general problem with projects that provide
their own versions of CMake modules when other CMake modules depend on
them. At the time we resolved this instance of the problem with commit
b0118402 (Use absolute path to FindPackageHandleStandardArgs.cmake
everywhere, 2010-09-28) for the 2.8.3 release.
In order to address the more general problem we introduced policy
CMP0017 in commit db44848f (Prefer files from CMAKE_ROOT when including
from CMAKE_ROOT, 2010-11-17). That change was followed by commit
ce28737c (Remove usage of CMAKE_CURRENT_LIST_DIR now that we have
CMP0017, 2010-12-20) which reverted the original workaround in favor of
using the policy. However, existing project releases do not set the
policy behavior to NEW and therefore still exhibit the problem.
We introduced in commit a364daf1 (Allow users to specify defaults for
unset policies, 2011-01-03) an option for users to build existing
projects by adding -DCMAKE_POLICY_DEFAULT_CMP0017=NEW to the command
line. Unfortunately this solution still does not allow such projects to
build out of the box, and there is no good way to suggest the use of the
new option.
The only remaining solution to keep existing projects that exhibit this
problem building is to restore the change originally made in commit
b0118402 (Use absolute path to FindPackageHandleStandardArgs.cmake
everywhere, 2010-09-28). This also avoids policy CMP0017 warnings for
this particular instance of the problem the policy addresses.
In commit 295b5b60 (Honor CMAKE_USER_MAKE_RULES_OVERRIDE in try_compile,
2010-06-29) we started passing the value of this variable when building
a try_compile project. If the variable contains a relative path it must
be treated with respect to the file where it is first used. Ensure that
the value is converted to a full path so that it is correctly referenced
in the try_compile projects.
The module header was being placed in the source tree before. Thanks to
Marcel Loose for the patch, this ensures the file is written to the
build tree.
The parent commit added a warning message whenever a required file
does not exist.
As it turns out, the "required" files never exist when built with
Visual Studio Express editions. Add a variable to suppress these
warning messages because only packagers or naive includers of
this file will care to see such warning messages.
We want to warn about this condition by default so that people who
are using InstallRequiredSystemLibraries without understanding it
fully will have a chance of understanding why it's not working in
the event of missing required files.
But we also want to give projects the ability to suppress this warning
(by "project's choice default") so that they can encourage users who
are restricted to using an Express edition to build their project.
Packagers should explicitly use...
-DCMAKE_INSTALL_SYSTEM_RUNTIME_LIBS_NO_WARNINGS=OFF
...when building releases. That way, their release build process will warn
them about any missing files, but only if their project CMakeLists files
use a construct similar to CMake's:
IF(NOT DEFINED CMAKE_INSTALL_SYSTEM_RUNTIME_LIBS_NO_WARNINGS)
SET(CMAKE_INSTALL_SYSTEM_RUNTIME_LIBS_NO_WARNINGS ON)
ENDIF()
Thanks to "J Decker" on the CMake mailing list for pointing out
that one of the MSVC10_CRT_DIR settings was using "VC90" instead
of "VC100".
After fixing that, I added the code to generate a CMake warning
if one of the files we think is "required" does not exist.
Then, with VS10, there were several other problems that the
warning revealed:
- MSVC10_REDIST_DIR needed more PATHS to be found correctly
- the 64-bit directory is named "x64" now, not "amd64" as in
previous VS versions
- manifest files no longer exist as separate files in the
redist subdirectories (they must be built-in as resources
to the dlls...?)
The check works for macros, functions, and variables, but not for types
or enumeration values. Clearly describe the behavior of the check with
respect to each symbol type.
ce28737 Remove usage of CMAKE_CURRENT_LIST_DIR now that we have CMP0017
7db8db5 Improve documentation and messages for the new CMP0017
db44848 Prefer files from CMAKE_ROOT when including from CMAKE_ROOT
1e69c6f Merge branch 'user-policy-defaults' into policy-CMP0017
65a0a2a Merge branch 'include-command-whitespace' into policy-CMP0017
Control the root directory of the default directory presented to
the end user of an NSIS installer by a CPack variable.
Previously, the value used in the NSIS script was $PROGRAMFILES,
which is equivalent to the "ProgramFiles" environment variable.
That default value is still the same, but now a project may
override the value by setting this new variable.
Introduced an additional variable, Python_ADDITIONAL_VERSIONS, to both
FindPythonLibs and FindPythonInterp. Changed FindPythonInterp to loop
over versions rather than hardcoding all versions (more like libs).
Commit aaa88d33 (Build large archives incrementally, 2008-08-04)
hard-coded rules to create static archives incrementally in each
language information file. Set each rule conditionally to allow
compiler and platform information files to override the language
default rules.
Inspired-by: Harald Pohl <pohl.h@eppendorf.de>
Unset VS_UNICODE_OUTPUT when executing a command whose output
is being logged to a file. Previously, running Microsoft tools
in sub-processes of Visual Studio would send their output to
the Visual Studio output pipe named by this environment variable.
Unsetting it forces the output back to the normal stdout and stderr
channels where cmake can intercept it and direct it to the
appropriate log files.
MUI_FINISHPAGE_RUN is frequently used with NSIS and provides a checkbox
on the finish page of an installer which specifies whether the specified
executable should be run when the installer exits. This commit adds support
for this setting in CPack.
NSIS installers default to assuming the executables exist in a
directory named "bin" under the installation directory. As this
isn't usual for Windows programs, the addition of this variable
allows the customization of this directory and links still to be
created correctly.
Add support to InstallRequiredSystemLibraries to only install
debug libraries when both debug and release versions are available.
This is as if you are building a debug package then only the debug
versions are needed but not the release.
InstallRequiredSystemLibraries currently defaults to installing to
bin on WIN32 and lib otherwise. This patch allows you to configure
this by using the variable CMAKE_INSTALL_SYSTEM_RUNTIME_DESTINATION.
It also switches the logic to use a single INSTALL(PROGRAMS) command
rather than two deprecated uses of the INSTALL_PROGRAMS command.
In InstallRequiredSystemLibraries the documentation details the
variable CMAKE_SKIP_INSTALL_RULES to skip installation. This
actually doesn't do anything, the variable required is named
CMAKE_INSTALL_SYSTEM_RUNTIME_LIBS_SKIP. This commit amends the
documentation to point to the correct variable.
971692c Build enable_language command during bootstrap
960ace1 Add testing for windows resources for mingw/msys/cygwin and remove for watcom.
060d6e8 Add support for windres to cygwin.
b2f308c Add support for windows resources with mingw/msys.
This puts the new search behaviour for included files in action, i.e.
now when a file from Modules/ include()s another file, it also gets the
one from Modules/ included, i.e. the one it expects.
Alex
Since commit 70c2dc8a (Make compiler id detection more robust,
2008-03-10) we store compiler identification strings in test binaries
using the form
char* info = "info";
Use the const-correct
char const* info = "info";
form instead. This allows the C++ compiler identification to work with
"-Werror -Wall" or equivalent flags if the compiler would warn about
const-to-non-const conversion.
The TI DSP compiler predefines "__TI_COMPILER_VERSION__". Use this to
identify the C and C++ compilers. For assembler language the C compiler
executable is used:
$ cl6x -h
TMS320C6x C/C++ Compiler v6.1.11
Tools Copyright (c) 1996-2009 Texas Instruments Incorporated
Use this command-line option and output to recognize the assembler.
The Mac linker defines flag -headerpad_max_install_names but not all
front-ends recognize the flag and pass it through (many did in the past,
such as the Apple port of GCC). Use the -Wl, option prefix to tell
front-ends to pass it through without trying to interpret it.
One of Cygwin's goals is to build projects using the POSIX API with no
Windows awareness. Many CMake-built projects have been written to test
for UNIX and WIN32 but not CYGWIN. The preferred behavior under Cygwin
in such projects is to take the UNIX path but not the WIN32 path.
Unfortunately this change is BACKWARDS INCOMPATIBLE for Cygwin-aware
CMake projects! Some projects that previously built under Cygwin and
are Cygwin-aware when they test for WIN32 may now behave differently.
Eventually these projects will need to be updated, but to help users
build them in the meantime we print a warning about the change in
behavior. Furthermore, one may set CMAKE_LEGACY_CYGWIN_WIN32 to request
old behavior during the transition.
Normally we avoid backwards incompatible changes, but we make an
exception in this case for a few reasons:
(1) This behavior is preferred by Cygwin's design goals.
(2) A warning provides a clear path forward for everyone who may see
incompatible behavior, and CMAKE_LEGACY_CYGWIN_WIN32 provides a
compatibility option. The warning and compatibility option both
disappear when the minimum required version of CMake in a project is
sufficiently new, so this issue will simply go away over time as
projects are updated to account for the change.
(3) The fixes required to update projects are fairly insignificant.
Furthermore, the Cygwin distribution has no releases itself so project
versions that predate said fixes tend to be difficult to build anyway.
(4) This change enables many CMake-built projects that did not
previously build under Cygwin to work out-of-the-box. From bug #10122:
"I have built over 120 different source packages with (my patched)
CMake, including most of KDE4, and have found that NOT defining
WIN32 on Cygwin is much more accurate." -- Yaakov Selkowitz
A fully compatible change would require patches on top of these project
releases for Cygwin even though they otherwise need not be aware of it.
(5) Yaakov has been maintaining a fork of CMake with this change for the
Cygwin Ports distribution. It works well in practice. By accepting the
change in upstream CMake we avoid confusion between the versions.
CMake itself builds without WIN32 defined on Cygwin. Simply disable
CMAKE_LEGACY_CYGWIN_WIN32 explicitly in our own CMakeLists.txt file.
09d1c10 FortranCInterface: Recognize NAG Fortran module symbols
af2ad90 Add NAG Fortran compiler information files
24cc3d4 Recognize the NAG Fortran compiler
83892c4 Allow Fortran platform files to set empty values
fe3f878 Detect object files in implicit link information
Use "int main(void)" instead of just "int main()" so that compiling with
"gcc -Werror=strict-prototypes" works. Test this check using the flags
"-Werror -Wstrict-prototypes" to work with old GCC versions.
Since commit aff31479 (Modernize GNU compiler info on Windows,
2009-12-02) the file Modules/Platform/Windows-g++.cmake has been unused.
It just includes the non-existent Modules/Platform/Windows-gcc.cmake so
remove it outright.
This moves Intel compiler info on Windows into new-style modules
Platform/Windows-Intel-<lang>.cmake
using language-independent helper module
Platform/Windows-Intel.cmake
to define macros consolidating the information.
Commit 4430bccc (Change the way 32/64 bit compiles are detected with
MSVC and intel, 2009-11-19) added detection of the target processor to C
and CXX language builds with MS and Intel tools. Do the same for Intel
Fortran for Windows (ifort). Use /machine:<arch> to link executables.
3bc828d Fixed bug where last entry would be lost.
b316087 Escape file write expansion, and build up lists.
68cd3fe Added CMAKE_CACHE_ARGS to ExternalProject.
27ee50a Add ECLIPSE_CDT4_GENERATE_SOURCE_PROJECT as a ADVANCED cache variable (#9631)
50d21d4 Add cache var CMAKE_ECLIPSE_MAKE_ARGUMENTS when using the Eclipse generator
This variable can be set to command line arguments which will be passed
to make when eclipse invokes make, e.g. you can enter "-j8" to get
8 parallel builds (#9930)
Alex
Escaped the @var@ in the file writes - this was being expanded at file
write and so not causing a reconfigure at the right time. I also took
care of build up lists of lists in the variables, especially important
for things like MPI_EXTRA_LIBRARY. Added some error checking, and use
the tmp_dir for initial cache file.
On Windows the limit for command line arguments is 8192 characters, and
this was limiting longer paths with some of our more nested projects
such as Library. Placing the -D arguments into CMAKE_CACHE_ARGS will
write out an initial cache file, that will be passed to CMake with a -C
argument as the initial cache.
By forcing the cache variables we preserve the existing behavior with
-D, to change the values of cache variables in our inner projects.
On Linux the NAG Fortran compiler uses gcc under the hood to link. Use
"-Wl,-v" to pass "-v" to the underlying gcc compiler to get verbose link
output. Detect the NAG Fortran directory (using -dryrun) and then honor
object files in the directory referenced in the implicit link line.
Pass real linker options with "-Wl,-Xlinker,". The -Wl, gets through
the NAG front-end and the -Xlinker gets through the gcc front-end.
The Numerical Algorithms Group (NAG) Fortran compiler does not document
a preprocessor macro to identify it. Check for identifying output using
the -V option.
Teach CMakeFortranInformation to use default flags only for variables
that have not been set at all, rather then not set or empty. This will
allow platform or compiler-specific information files to set empty
values without getting the defaults.
The NAG Fortran compiler implicitly passes object files by full path to
the linker. Teach CMakeParseImplicitLinkInfo to parse object files that
match some tool-specific regular expression.
FindTCL.cmake switched variables in the FIND_LIBRARY invocation. The
FIND_LIBRARY() statement for TCL used the TK variables and vice versa.
This patch reverses that into the right usage.
Closes debian issue 600245.
Also, improve the documentation of the fixup_bundle and fixup_bundle_item
functions to clarify that plugin type "libs" need to be copied into
the bundle *before* calling fixup_bundle.
Commit e93a4b4d34 changed the way that
the libs parameter to fixup_bundle is interpreted. Before the commit,
the libs were copied into the bundle first and then fixed up. After
the commit, the copy was skipped, assuming the libs were in the bundle
in the first place, and then the fixups occurred as before.
However, before the commit, it was possible to name a lib from outside
the bundle, and have it copied in and then fixed up. Its resolved
embedded name was always inside the bundle before. After, its resolved
embedded name was just the same as its resolved name, which is in its
original location, and not necessarily inside the bundle.
This manifested itself as a problem with the ParaView call to
fixup_bundle and its many plugins. Previously, ParaView had simply
passed in the list of plugin file names as they existed in the build
tree, and left the copying into the bundle up to the fixup_bundle
function. When built with CMake 2.8.3 (the first version to contain
the above named commit) the fixup_bundle call would inadventently
fixup libraries in the build tree, not libraries that were in the
bundle. Furthermore, the plugins would not be in the final bundle.
This points out the fact that the fix for the bugs made by the above
commit was a backwards-incompatible change in behavior.
This commit makes it an error to try to fixup an item that is not
already inside the bundle to make the change in behavior apparent
to folks who were depending on the prior copy-in behavior: now,
they should get an error, and hopefully, reading the new and
improved documentation, should be able to resolve it in their
projects by adding code to install or copy in such libraries prior
to calling fixup_bundle.
Whew.
e0b6016 Some more fixes for nasm support, from Etienne (#10069)
d25c2eb Use CMAKE_ASM_NASM_FLAGS for nasm instead of FLAGS
e614e9b Add support for yasm, a nasm compatible assembler
79dd9be We already have 2010, fix copyright year.
ffeca06 Add missing copyright headers
7b337ac Improve misleading comments.
e1fc9b9 Add support for nasm assembler, patch by Peter Collingbourne (see #10069)
Use the Config mode of find_package to search for ITKConfig. This makes
FindITK a thin-wrapper around a standard find_package, bringing benefits
like searching lib64 paths when appropriate. This does for FindITK what
commit 2c1a01dc (Modernize FindVTK module, 2009-10-07) did for FindVTK.
The Mac linker defines -headerpad_max_install_names and the GCC
front-end passes this flag through. The PGI compiler does not know
about this flag, so we must use -Wl,-headerpad_max_install_names to pass
it to the linker instead.
CMakeDetermineASMCompiler.cmake relied on that somebody else (usually
during enabling C or CXX) already included that file, and broke if that
was not the case.
Thanks to Louis for the patch
Alex
The Cray Fortran compiler needs "-em" to enable module output and also
"-J." to place the .mod files in the current working directory (instead
of next to the .o file).
Previously FindPerlLibs did not work with the Mac stock Perl because it
includes patches. From "perl -V":
Locally applied patches:
/Library/Perl/Updates/<version> comes before system perl directories
installprivlib and installarchlib points to the Updates directory
Adjust paths accordingly.
48e80eb Fixes to GetPrerequisites for cygwin
bee4802 Append the gp_tool path to the system PATH using native slashes.
8e550ba Remove unecessary TO_CMAKE_PATH for gp_cmd_dir.
1684198 Switch to CMAKE_PATH when doing PATH comparisons on Windows.
be94c49 Fixed appending PATH to dumpbin tool from growing without bounds.
Fix IF(WIN32) guards check for cygwin. Fix checking if the depenency is in a system location to use cygwin style paths on cygwin. Also change GetPrerequisites to switch gp_tool to tools that are very unlikely to be found, ie. dumpbin on Apple and otool on Windows/Unix.
Users PATH may contain elements that end with backslash. This will escape the semicolon when iterating resulting in mismatches.
Fix indentation.
Fix whitespace
This fixes bugs #0011355 and 0008342.
The merged patch is a contribution from Michael Lasmanis and Petri Hodju
with some extra documentation added by the merger.
IF(... MATCHES ...) used for comparing directories chokes especially in the case of C:\Program Files (x86)\<blah> because of regex pattern matching. Switched this to use STREQUAL in a loop instead.
Fixed parallel build for projects using generators that have the
CMAKE_EXTRA_GENERATOR as well as CMAKE_GENERATOR. Thanks to Bill Hoffman
for helping me to track this one down, I missed parallel builds.
There is no need to introduce this extra variable as FindBoost
can simply rely on if Boost_USE_STATIC_RUNTIME is defined
or not to disable the old searching behavior for static runtime
libraries on WIN32.
On a Win32 system with a German version of SilkSVN I couldn't run CMake
again on the working copy as the cache is displayed as corrupted. The
cause is that the regular expression to find the version number will not
match and put everything from the "svn --version" output into the cache,
which contains umlauts and other funny characters.
Fix the regexp to not only match " version " but also " Version " as
it's in the German output. I have no idea what will happen on a French
or Japanese system. This should be easy to test as it happens also on a
German Linux system.
b935f00 Close ENDFUNCTION() properly with the same name as FUNCTION()
07bca48 Set a default DESCRIPTION if none is given for ALL mode of feature_summary()
d5b2915 APPEND and not-APPEND mode of feature_summary() were swapped
In each CMake<lang>Information.cmake file we use an _INCLUDED_FILE
variable to track whether a compiler information file has been loaded.
Reset this variable for each language.
This fixes Fortran under VS generators with the Intel plugin.
Previously the variable would be left set true from C and C++ and then
Fortran would not load old-style files like Platform/Windows-ifort.
If a Qt installation is in CMAKE_PREFIX_PATH and a
QT_QMAKE_EXECUTABLE points to a qmake for a different Qt installation,
prefer finding libs in the latter Qt installation.
Use a separate variable to pass to the BUILD_COMMAND call
and then use set(CACHE) to transfer that to MAKECOMMAND.
That way, if MAKECOMMAND is in the cache already, it is
left untouched. Fixes regression introduced in commit
0b38bb4c with the fix for bug #2336.
Thanks to Evgeniy P for the patch.
Parse compiler flags like "-fmessage-length=0 -fstack-protector
-funwind-tables -fasynchronous-unwind-tables -fno-strict-aliasing" from
the output of "mpicc -show". We already handle preprocessor definition
arguments like -DUSE_STDARG. Honor '-f' flags too.
Add Boost_REALPATH option for people packaging Boost with their app:
Boost_REALPATH Resolves symbolic links for discovered boost libraries
to assist with packaging. For example, instead of
Boost_SYSTEM_LIBRARY_RELEASE being resolved to
"/usr/lib/libboost_system.so" it would be
"/usr/lib/libboost_system.so.1.42.0" instead.
This does not affect linking and should not be
enabled unless the user needs this information.
* Add a warning if the user sets Boost_ROOT which is not correct
* Clarify directions to the user for viewing debugging messages
* Move the CMAKE_FIND_LIBRARY_SUFFIXES tweak outside of a for loop
* Fixed issue 11204: FindBoost.cmake had trouble discovering libraries
when both -sgd and -gd libraries were available by adding a new option
Boost_USE_STATIC_RUNTIME.
Backwards compatibility of searching for first -gd and then -sgd on
WIN32 is maintained unless the user sets Boost_COMPAT_STATIC_RUNTIME to
false (or they have set Boost_USE_STATIC_RUNTIME).
* Fixed issue 8529: FindBoost was unable to detect boost libraries compiled against
STLport, by reworking the way the Boost ABI tag is calculated. There are additional
ABI tag options available now as well.
* Boost_DEBUG now reports the full list of filenames being searched for when
find_library is called.
Use a combination of response files and the archiver to support long
object file lists that do not fit in the Windows command-line length
limit. This can work only with GCC >= 4 because the MinGW GCC 3.x
front-ends do not support response-file syntax.
CUDA 3.2 on Windows systems changed the layout of the library paths. This adds the extra
directories needed to locate the new files.
I also explicitly disable emulation mode for CUDA 3.1+. This feature was deprecated in
3.0 and ultimately removed in 3.1. The script errors out if CUDA_BUILD_EMULATION is
turned on. I didn't want to ignore emulation mode (even with a warning - which most
people may not even see) and have users confused as to why it wasn't working.
The default value for CMAKE_INSTALL_PREFIX should be
based on what architecture the built targets are, not
what architecture CMake itself is.
This fix merely guesses better what the built targets
architecture is. It still may guess incorrectly in some
cases. For those cases, it will have to be up to build
scripts and developers on projects to pass in a correct
value for CMAKE_INSTALL_PREFIX with -D on the command line
or via 'force cache value' logic in CMakeLists.txt files.
7944e4e Allow testing of .CPP on WIN32 as it is a case insensitive OS and should work.
ba0a890 Only test for .CPP on Microsoft compilers which will handle .CPP as c++.
d26cd46 Only use .CPP .CXX and .C++ do not work by default with g+++.
ced61f5 Let CMake recognize .CPP .CXX and .C++ as c++ files.
ede24f8 ENH #8993: FindwxWidgets add support for wx-config custom options.
3dbeeb7 BUG #8184: Fixed FindwxWidgets wrong order of default libs for MinGW.
f46712e BUG #11123: Generic include dir should come after config specific one.
6cb14eb STYLE: Clarified/Fixed documentation of UsewxWidgets.
36c15a2 BUG #10658: FindwxWidgets USE_FILE should not include .cmake extension.
5cdfc9c Improve wording of the error message of find_package() in config-mode
4969c3b Improve version notice in the generated message
e8ae504 Add option CONFIG_MODE to FPHSA()
b4b8f96 Don't create an empty element at the end of Foo_CONSIDERED_CONFIGS/VERSIONS
cc955a0 Small cleanup of FindPackageHandleStandardArgs.cmake
0367245 Replace the two vector<string,string> with one vector<struct{string,string}>
130b0e2 Improve error message in Config-mode when no appropriate version was found
dfe9c95 Record all considered Config files and their versions.
This ensures that any bundle items are made user writable before
any attempt is made to alter them using install_name_tool. This is
because MacPorts/Fink/Homebrew don't install libraries as writable.
This fix is needed to allow fixup_bundle_item to work correctly
when ingesting libraries installed by these package managers.
Set CMAKE_PLATFORM_REQUIRED_RUNTIME_PATH in the HP-UX platform file to
tell CMake to pass -Wl,+b,/usr/lib no matter whether RPATH is enabled or
not. This corrects the behavior of -Wl,+nodefaultrpath to look in this
default library path as documented.
The gdk-pixbuf library was split off from core GTK in 2.21 so it could be used
separately by people outside GTK. Now FindGTK searches and adds it to the
library/include list. Thanks to Vincent Untz for the patch and Ricardo Cruz
for the heads up.
This work was started from a patch by Thomas Schiffer.
Thanks, Thomas!
See the newly added documentation of the FOLDER target
property for details.
Also added global properties, USE_FOLDERS and
PREDEFINED_TARGETS_FOLDER. See new docs here, too.
By default, the FOLDER target property is used to organize
targets into folders in IDEs that have support for such
organization.
This commit adds "solution folder" support to the Visual
Studio generators. Currently works with versions 7 through
10.
Also, use the new FOLDER property in the ExternalProject
test and in the CMake project itself.
Include this prefix in CMAKE_SYSTEM_PREFIX_PATH so that it will be used
for all find* commands. Previously only find_library and find_path
would look under /opt/local/lib and /opt/local/include, respectively.
88e6447 Add macro ADD_FEATURE_INFO() and improve docs.
b353524 Improve wording of the documentation.
6fc88b2 Improve documentation.
3333878 Log the required package version and major improvement to FeatureSummary
3178767 Merge 'CPack-FixDESTDIR-Issue7000' from github.com:TheErk/CMake
6a521f8 CPack Enable better handling of absolute installed files
40dc97d CPack Backward-compatibly enforce DESTDIR for DEB and RPM
Now the version number is also printed if no required version was
specified, but a version number was detected (showing more information
shouldn't hurt).
The code for generating the failure message in config-mode is moved
into a separate helper macro, it was becoming too much.
Alex
When this option is used for FPHSA(), it automatically handles the
information created by a preceding find_package(NO_MODULE) all and
creates a proper success/error message.
Alex
ADD_FEATURE_INFO() can be used to set the info for a feature,
e.g. an option().
set_feature_info() has been renamed to set_package_info(), since this is
about found or not found packages. For compatiblity set_feature_info()
is still provided.
Alex
of http://github.com/themiwi/CMake
into fix-10747
Conflicts:
Modules/BundleUtilities.cmake
There was one newly added function in BundleUtilities.cmake
which also needed the same "documentation at top" treatment.
find_package() now also stores the required version automatically, so it
can be used by FeatureSummary.cmake.
This was one of the requested features for setting up nightly builds
for KDE, since with this functionality it will be possible to write
a file at the end of each project which lists all required packages
and their versions. This file could then be compared for equality
with an older one and if something has changed the build maintainer
can be emailed.
In FeatureSummary.cmake there is now a new function feature_summary(),
which also allows to print the log to a file or into a variable.
It also allows to specify whether to append to a file or to write a new
one, and what information to log.
Docs are still missing.
Alex
Fix bug 11120. Parameters files previously went into source
directory when qt4_generate_moc() was given relative paths.
Also simplified some logic for absolute paths.
This commit introduces the ability to add custom targets
that correspond to individual ExternalProject steps.
The main motivation behind this new feature is to drive
sub-project based dashboard steps as external projects
with separate targets for update, configure, build and
test output. This makes it easy to construct a ctest -S
script to drive such a dashboard.
With no STEP_TARGETS defined, there are no additional
custom targets introduced, to minimize the chatter in
the target name space. Clients may define STEP_TARGETS
on a per-ExternalProject_Add basis, or at the directory
level by setting the EP_STEP_TARGETS directory property.
The idea of the patch is to let the install generator define
CPACK_ABSOLUTE_INSTALL_FILES then when CMake is installing
project he will concatenate the list of files and give
it to specific CPack Generator by defining CPACK_ABSOLUTE_INSTALL_FILES
to be the list of ALL files that were installed using absolute destination.
An example of use has been applied to RPM generator which now
tries to automatically build a relocatable package.
Included patch by Simone Rossetto to check if either Python or Perl
are present in the system. Whichever intepreter that is detected
is now used to run the test generator program. If both interpreters
are detected, the CXXTEST_USE_PYTHON variable is obeyed.
Also added support for CXXTEST_TESTGEN_ARGS, for manually specifying
options to the CxxTest code generator.
c327cbd Modules: Fix CMakeParseArguments copyright notice
9eb6cc1 Merge branch 'module-notices' into CMakeParseArguments
b173b87 Add macro CMakeParseArguments() and use it in FPHSA()
In CMAKE_DETERMINE_COMPILER_ID_VENDOR() the compiler is called with various
arguments. In some cases, this can make the compiler hang and wait
forever for input (e.g. "as -v"). That's why add an timeout
so it terminates finally. 10 seconds should be more than enough,
this is the time it takes to startup the compiler, which is
usually quite fast.
Alex
For assembler, the "compiler ID" cannot be detected by "compiling" a
source file, since there is not source file all assemblers understand.
Instead the function CMAKE_DETERMINE_COMPILER_ID_VENDOR() is used to
run the assembler and check its output.
For this the CMAKE_DETERMINE_COMPILER_ID_VENDOR() function had to be
extended so that it creates the run directory if it doesn't exist yet.
In CMakeASMInformation.cmake now also CMAKE_ASM_COMPILER_ID is used
(but there are no such files yet, will come with the support for the
IAR toolchain).
Alex
ZLIB_VERSION_STRING was "1.2.3.#define ZLIB_VERSION "1.2.3"" here, because
the result of the matching for the tweak version was also appended if there
was no TWEAK version and the regexp failed, which gives as result not
an empty string, but the full string.
Now it is only appended if the regexp matches.
Alex
This adds a macro cmake_parse_arguments() (as discussed on cmake-devel)
which can be used in macros or functions to help with parsing its
arguments. Detailled docs are included.
find_package_handle_standard_args() is the first user of this new macro.
Alex
The _TARGET_SUPPORTS_SHARED_LIBS variable was being altered outside of
the find module, moving it into the function fixes any of these scoping
issues. Fix tested and verified in VTK and Titan.
BlueGeneP-base: Internal base shared by static and dynamic files
BlueGeneP-static: Platform file for all-static builds
BlueGeneP-dynamic: Platform file for "default" dynamic builds
* Add support for detecting fontconfig.h header
* Call find_package(Freetype) since it's required
* Add support for allowing users to add additional library directories
via the GTK2_ADDITIONAL_SUFFIXES variable (kind of a future-kludge in
case the GTK developers change versions on any of the directories in the
future).
* Fixed a problem on Windows where you had to configure twice to find
the gtk & gdk libraries
430336c Merge branch 'findsubversion_fphsa_cleanup'
b6c6156 Use FPHSA() in FindSWIG, including version checking.
656cd2f Improved version checking for FindCUDA using the new mode of FPHSA
126db7b Improved version checking for FindSubversion using the new mode of FPHSA()
77d909b Fix DETAILS string with version number in FHPSA()
19b68b9 Improved version checking for FindJava using the new FPHSA() mode
6bb0b6e Improved version checking for FindRuby using the new mode of FPHSA()
946493f FindSquish doesn't detect the version, remove that from the documentation
cb9d1ea Add version checking support to FindFlex and FindPerlLibs
Use response files for C and CXX languages with the Intel compiler on
Windows. We already used them for Fortran. This enables creation of
libraries and executables with a very large number of object files.
Read zlib.h by using file(STRINGS.....REGEX) to limit the amount of text we apply the version regex on. This patch also addresses the fact that the version string may contain a tweak component.
Patch by Simone Rossetto
This additional mode also supports version checking and should be
easily extendible, e.g. for COMPONENT stuff.
Updated FindBISON.cmake as first user of this new mode.
Docs updated.
Alex
The intent was to warn about misspelled keyword arguments,
but the effect was to warn about valid argument values far
too often. Let's stop annoying and confusing people.
By default, if an embedded item is a framework, copy its
main dylib file explicitly, and then also its Resources
if it has any.
Inspect a variable, BU_COPY_FULL_FRAMEWORK_CONTENTS, and
if it's ON, copy the entire framework into the bundle.
ExternalProject_Add calls that did not explicitly request a
CMAKE_GENERATOR would not get recursive parallel make behavior.
This commit fixes that issue.
38c762c Merge 'remove-CTestTest3' into ctest-file-checksum
46df0b4 Activate retry code on any curl submit failure.
8705497 Checksum test should use CMAKE_TESTS_CDASH_SERVER
d0d1cdd Mock checksum failure output for old CDash versions
af5ef0c Testing for CTest checksum
86e81b5 CTest should resubmit in the checksum failed case
d6b7107 Fix subscript out of range crash
082c87e Cross-platform fixes for checksum/retry code
e525649 Checksums on CTest submit files, and retry timed out submissions.
56da481 Changed ADDITIONAL_SEARCH_PATHS to PostgreSQL_ADDITIONAL_SEARCH_PATHS.
106de67 Forgot the copyright notice.
5ecfe16 Adding a FindPostgreSQL.cmake module
7fd3739 Find correct Qt plugins for cross-compiling.
ff888dd Fix some issues with refinding when qmake executable is changed.
22e725f Tweak for cygwin, don't convert : to ;
b55da4c Add cross-compiling support to FindQt4.cmake
Fix niggly in ExternalProject that would inadvertently
create a log file of output when a command was explicitly
set to the empty string.
Also, increase the default value for showing context
around build errors to 10 lines, up from 6. Also add
the ability to customize this setting so that users
can put it back to 6 or even lower if they want, or
show more if they want.
-remove trailing whitespace
-fix description of CPACK_RPM_PACKAGE_SUMMARY
-fix description of CPACK_RPM_PACKAGE_VENDOR
-fix description of CPACK_RPM_PACKAGE_PROVIDES
-do not put changelog of that file to generated RPM but read it from CPACK_RPM_CHANGELOG_FILE
-add CPACK_RPM_PACKAGE_URL
-add CPACK_RPM_PACKAGE_OBSOLETES
-add CPACK_RPM_PACKAGE_SUGGESTS
-add a loop so adding more user supplied header fields is easy
Signed-off-by: Eric NOULARD <eric.noulard@gmail.com>
Commit d84cbd0f (FindMPI: Parse mpicc flags more carefully, 2010-06-24)
broke parsing of '-L' flags appearing after '-Wl,' by expecting a
preceding space. Update the regular expression to allow '-Wl,-L' too.
Do not hard-code known BlueGene/L MPI libraries. We do not know their
location so the linker cannot find them without the proper -L search
path. The MPI compiler tells us about the libraries anyway, and if it
does not then the user can fix the problem locally by editing the
MPI_EXTRA_LIBRARY cache entry.
Extend the fix from commit 68c7d3e2 (FindMPI: Do not parse -l in middle
of library name, 2010-06-24). Parse -D, -I, -L, and -Wl only with
preceding spaces or at the beginning of the string.
ldd can return "not found" and we need to handle it correctly.
In that case, we extract only the name of the library instead of trying for its full path.
Some zlib.h files have ZLIB_VERSION "1.2.3.3" with 4 numbers instead of 3.
The regex is changed to grab the first 3 numbers.
It was slow because if it failed to find that string near the top of the file,
where it usually is, it would read the entire file.
We parse the output of 'mpicc -shome:link' to look for -l options
specifying libraries. Fix the parsing regex to avoid matching the
string '-l' in the middle of a library name.
Avoid issues with two external projects trying to extract two
separate trees at the same time into the same location. Should
fix the sporadically failing ExternalProject test on the dashboards
for parallel builds.
In version 3.0 of the CUDA toolkit when building code for emulation, you need to link
against a new version of the cuda run time library called cudartemu. This CL adds a check
for the new library and uses it when present and in emulation mode. Note that this
library is not present in previous or subsequent versions of the CUDA toolkit.
Optionally hide the output of each external project build step by
wrapping its command in a launcher script. Make output available in log
files instead. This simplifies the output of external project builds.
Brad King
Alex Neundorf
David Cole
Tim Gallagher
Mike McQuaid
Eric NOULARD
James Bigler
Alexey Ozeritsky
Mathieu Malaterre
Pierre-Francois Laquerre
Clinton Stimpson
Stephen Kelly
Rolf Eike Beer
Ondrej Balaz
Mateusz Loskot
Dan Kegel
Nicolas Despres
Philip Lowman
Marcus D. Hanwell
Bill Hoffman
Todd Gamblin
Andreas Schneider
David Faure
Björn Ricks
Will Dicharry
Arnaud Gelas
Aaron C. Meadows
Matej Hribernik
Modestas Vainius
Julien Malik
Christoph Höger
Manuel Klimek
Oliver Buchtala
Clement Creusot
Martin Konrad
Michael Wild
Markus Rathgeb
Nikita Krupen'ko
Wojciech Migda
Yaakov Selkowitz
Kai Wasserbäch
Ben Boeckel
Andrius Štikonas
Dave Abrahams
David Partyka
David Gobbi
Marcel Loose
Miguel A. Figueroa-Villanueva
Arjen Verweij
Kovarththanan Rajaratnam
Pino Toscano
Andrew Maclean