c9761de Improve documentation for WriteBasicConfigVersionFile.cmake
208bb90 Set UNSUITABLE instead of not COMPATIBLE
bb03c2d Really fix copyright notice
d50a61a Fix copyright notice
4ba09bc Add some tests for write_basic_config_version_file()
02b1e4b Add example to documentation
d216a67 Provide macro write_basic_config_version_file()
Any STATUS output will be fed directly to the compiler, which
will not understand any status messages. Error messages
are fine, since they are errors and it is ok if the compiler
fails in such cases.
Alex
It already works :-)
Needs more refactoring, e.g. using the cmake facilities to turn a string
into a vector etc.
Also still missing is the part which creates the custom target.
Alex
Makes VS 7, 8 and 9 generators consistent with the VS 10
generator. Adds the "AdditionalIncludeDirectories" attribute
at the vcproj level so that all idl files inherit the /I
command line args.
For the specialization of hash<>(), the types long long and __int64
may be the same type. While the CMakeLists indicate that if __int64 is
a alias for another type the it will not be enabled, on mingw they
both appear to be the same type and enabled.
This patch only enable specialization for long long OR __int64 to
avoid the potential conflict.
Author: Bradley Lowekamp <blowekamp@mail.nih.gov>
Change-Id: I813a9ac008b296fab5a369c48e6dd5460fd0c035
Added hash function for types long long and __int64, conditional on
detection by FundamentalType.
Author: Bradley Lowekamp <blowekamp@mail.nih.gov>
Change-Id: Ie273f55cd4387ca3dbbe00b9d96ad4935e456c9e
For custom commands in VS2010 Fortran projects the INTDIR variable
is different than in the rest of the solution because Intel
fortran still uses the old VS project files even in VS2010. So,
we replace $(Configuration) directly in the project files. I have also
added a FortranOnly test that tests this feature and is run on any
generator that has Fortran abilities.
We already use GetSystemTimeAsFileTime() and gettimeofday()
unconditionally on supported Windows and non-Windows platforms,
respectively. Remove outdated portability complexity.
This deterministic ordering makes it easier for a developer
comparing the ctest output of two test runs to see what changed
from run to run.
Thanks to Fraser Hutchison for the patch.
e2e8c0a Also put builtin include dirs into CodeBlocks project file
92c0dc5 Remove useless line of code
a5683f8 Patch by Campbell Barton: puts definitions into C::B project file
b62349c FeatureSummary.cmake: update documentation
f366cf8 FeatureSummary.cmake: cosmetics
f407bb5 FeatureSummary.cmake: only higher TYPEs can override previous TYPEs
02d47ab FeatureSummary.cmake: error out when a REQUIRED package is missing
91a1527 FeatureSummary.cmake: add INCLUDE_QUIET_PACKAGES keyword
0671a02 FeatureSummary.cmake: remove "comment" field
aae13f4 Extend FeatureSummary: add PURPOSE of package and TYPE
Refactor code from CMakeFindEclipseCDT4.cmake so it can be used
alkso for CodeBlocks, and move it into new file
CMakeExtraGeneratorDetermineCompilerMacrosAndIncludeDirs.cmake.
Alex
This macro can be used to generate basic version files which can be
installed along a Config.cmake file to provide versioning support.
This (3rd try) is implemented using a macro, which maps
the COMPATIBILITY mode to a filename and configure_file()s the
resulting file.
Alex
Since commit 85c0a69a (Cygwin: Do not define 'WIN32', 2010-12-17) WIN32
is not defined on Cygwin. Update documentation of the WIN32 variable
accordingly.
Fix NSIS template to more thoroughly use CPACK_PACKAGE_INSTALL_REGISTRY_KEY.
This allows different versions of software to have a separate sections in the
registry to keep track of things (installed components, and uninstall stuff).
Change default of CPACK_PACKAGE_INSTALL_REGISTRY_KEY to follow the value of
CPACK_PACKAGE_INSTALL_DIRECTORY so if an installation overwrites another installation,
the proper registry entries are more likely to be overwritten.
Fix CPack/NSIS generator to not insert code in the NSIS template to skip installation
of already installed components. This enables a repair like behavior and also enables
installing patch releases on top of an older installation.
Thanks to Pau Garcia i Quiles for the inspiration for the patch.
I've tweaked it a bit compared to what's in the bug tracker: this
commit does not allow empty global variable names.
I also added usage of the new feature to an existing test. Although
it has no effect on the resulting Visual Studio projects, you can
verify that the VSResource test produces a non-empty globals section
in the generated .vcproj(x) files.
4a50b5f Add a basic test for CMAKE_DISABLE_FIND_PACKAGE_<package>
a66df08 Add documentation for the CMAKE_DISABLE_FIND_PACKAGE_<Name> switch
6e1d3ed Add a switch to disable a find_package() call completely
Now found packages are not stored in ENABLED/DISABLED_FEATURES
anymore, but always in PACKAGES_FOUND/NOT_FOUND.
ENABLED/DISABLED_FEATURES is now only used via
ADD_FEATURE_INFO(), e.g. for stuff set via option().
Alex
set_property() has APPEND, which creates a list. E.g. when
appending to COMPILE_FLAGS a string is needed, not a list.
With the APPEND_STRING option the value is append as string,
not as list.
Alex
In find-package mode, cmake executes Modules/CMakeFindPackage.cmake,
which calls find_package(), and this is then evaluated in cmake.cxx,
which prints an appropriate message to stdout, so it can be used
e.g. in a normal Makefile:
$ /opt/cmake-HEAD/bin/cmake --find-package -DNAME=JPEG
-DCOMPILER_ID=GNU -DLANGUAGE=C -DMODE=EXIST
JPEG found.
$ /opt/cmake-HEAD/bin/cmake --find-package -DNAME=JPEG
-DCOMPILER_ID=GNU -DLANGUAGE=C -DMODE=COMPILE
$ /opt/cmake-HEAD/bin/cmake --find-package -DNAME=JPEG
-DCOMPILER_ID=GNU -DLANGUAGE=C -DMODE=LINK
-rdynamic -ljpeg
Alex
A common mistake when using custom commands is to list the output of a
command in multiple targets that may build in parallel. Warn against
this case in the documentation and suggest a better approach.
8555c2b Look for VCExpress as a possible build tool as well as devenv.
ed0075b Use relative paths for custom command inputs.
38368d5 Revert "With very long file names, VS 2010 was unable to compile files."
8cd66dc Use devenv instead of msbuild for vs2010.
For source files we use full paths. This allows for longer directory
names with VS2010. However, the use of full paths causes the GUI
to not display the custom commands.
As discussed, this adds a switch CMAKE_DISABLE_FIND_PACKAGE_<name>,
which, when set to TRUE, keeps the find_package() command from executing.
When the package is REQUIRED at the same time, an error is generated.
Alex
The workaround added by commit 7e92f0b4 (Hack to make echo command work
properly in mingw32-make, 2006-10-05) and updated by commit 69356d8a
(Juse use cmake -E echo instead of the native echo, 2006-10-13) no
longer seems necessary with modern mingw32-make. Furthermore it slows
performance due to the time spent loading a cmake process instead of
plain echo.
Do not require the C language to be enabled to do lib->lib64 conversion.
The check was originally added by commit a5825cd1 (check in new find
stuff, 2006-03-02) to ensure that CMAKE_SIZEOF_VOID_P is set. Since
commit 3fdf1411 (FIND_LIBRARY should not require CMAKE_SIZEOF_VOID_P,
2008-02-11) the code following the check does not fail when the variable
is not set, so just remove the original check. This allows conversion
for any language that is enabled so long as the address size is known.
Reported-by: Christoph Höger <choeger@cs.tu-berlin.de>
1ed19bc multiarch: Set CMAKE_LIBRARY_ARCHITECTURE_REGEX for Linux|Hurd|kFreeBSD
52a6ed2 Test find_package multiarch support (#12037)
b41ad3b Teach find_(library|package) about Linux multiarch (#12037)
When add_test(NAME) is called without the CONFIGURATIONS argument then
the test is intended to run in any configuration. In multi-config
generators like the VS IDE and Xcode tests created by add_test(NAME) can
only be run when testing a known configuration (otherwise there is no
way to generate the test command line). If no test command line is
known for a particular configuration, or if no configuration is given to
ctest, report the test as not run instead of silently skipping it.
Also fix CMake's own TestsWorkingDirectory test invocation to correct a
previously silent failure exposed by this change.
When generating per-config blocks in test and install scripts replace
the form
IF()
# config == A
ENDIF()
IF()
# config == B
ENDIF()
with
IF()
# config == A
ELSEIF()
# config == B
ELSE()
# no config matches
ENDIF()
for clarity and to support the else() case cleanly.
f09ba0f Fix style errors added by parent and grandparent
eeeeca1 XCode: Support target folders on XCode.
59ed84e Xcode: Support multiple level nesting of XCode folders (#10039)
d0a403f CMake: Move tokenize to cmSystemTools
Implement support for multiarch as specified here:
http://wiki.debian.org/Multiarchhttps://wiki.ubuntu.com/MultiarchSpec
Detect the <arch> part of <prefix>/lib/<arch> from the implicit library
search path from each compiler to set CMAKE_<lang>_LIBRARY_ARCHITECTURE.
Define CMAKE_LIBRARY_ARCHITECTURE using one of these values (they should
all be the same). Teach the find_library and find_package commands to
search <prefix>/lib/<arch> whenever they would search <prefix>/lib.
27aa446 One more try. Use full path by default, and relative on broken compilers.
2dfc121 Use bin tree for inclues to avoid -I with spaces in the path.
6d29b4b Append and do not clobber CMAKE_CXX_FLAGS in the test.
7815e90 Fix for bug#10798. VS10 did not append -I flags with COMPILE_FLAGS prop.
In cmMakefile.cxx GetCMakeCFGInitDirectory is replaced with
GetCMakeFilesDirectory for .rule files. In some cases with
external projects, that directory will not exist. With vs10
the .rule files must exist or the rule will run with every build.
This fix creates the path that the .rule file is in. In addition,
it is now a CMake error if the .rule file can not be created.
David Cole
Johan Bjork
KWSys Robot
Alex Neundorf
Brad King
Bill Hoffman
Clinton Stimpson
Steven Velez
Modestas Vainius
Matej Hribernik