It is common to specify a CMAKE_TOOLCHAIN_FILE and get a warning
for using it despite it not being used.
The WarnUnusedCliUnused test relies on the warning being emitted
each time cmake is run on an existing build. That behavior is changed
by this patch to warn only on the first invokation of CMake, and not
on subsequent invokations (because the variable is in the cache with
the same value). For that test, a clean target is added which clears
the cache and cause the warning to be emitted each time.
As the Ninja generator does not support the feature needed to test
this, it is not tested with that generator.
Checkout [1] as an example of the test failures. In that particular cases, the
failures is caused by the plus sign in the path being pass unescaped
(buildd-cmake_2.8.9-1~bpo60+1-armel-3Lvkef) to the regexp.
In addition to failures in the log, the following new tests also fail in 2.8.11:
243 - CTestTestMemcheckUnknown (Failed)
244 - CTestTestMemcheckUnknownQuoted (Failed)
248 - CTestTestMemcheckDummyValgrindFailPre (Failed)
249 - CTestTestMemcheckDummyValgrindFailPost (Failed)
250 - CTestTestMemcheckDummyPurify (Failed)
251 - CTestTestMemcheckDummyBC (Failed)
253 - CMake.List (Failed)
[1] https://buildd.debian.org/status/fetch.php?pkg=cmake&arch=armel&ver=2.8.9-1~bpo60%2B1&stamp=1369243896
dc1d025 OS X: Add test for rpaths on Mac.
8576b3f OS X: Add support for @rpath in export files.
00d71bd Xcode: Add rpath support in Xcode generator.
94e7fef OS X: Add RPATH support for Mac.
In Qt 5.1, Qt5::Core has a INTERFACE_QT_MAJOR_VERSION property
of '5', and since CMake 2.8.11, Qt4::QtCore has an
INTERFACE_QT_MAJOR_VERSION of '4'. This was introduced in
commit 4aa10cd6 (FindQt4: Set the INTERFACE_QT_MAJOR_VERSION for
Qt4::QtCore, 2013-03-16), to produce an error if Qt 4 and Qt 5
are erroneously used by the same target. This can also be used
however to determine the Qt major version, and therefore the
particular moc executable to use during automoc steps. This means
that targets in a single buildsystem can use a selection of Qt 4
and Qt 5, and still take advantage of the CMAKE_AUTOMOC feature
without conflicting.
6489015 Remove an endif() followed by an if() for the same condition.
e7813b1 Add a test for Qt5Automoc
27fb96b Make the QtAutomoc test compile with either Qt 4 or Qt 5
ac9a5f4 ctest_build: Pass projectDir to GenerateBuildCommand
a6c0299 CTest: Simplify ctest_* command source/build dir lookup
1ca9318 VS: Add test for building MSBuild project in subdir
3cd4000 VS: Use .sln parser to build targets in subdirs with msbuild (#13623)
df035e4 VS: Create parser for Visual Studio .sln files
de8be9e Add projectDir parameter to GenerateBuildCommand
Add support to maintain designer functionality for Visual Studio C++
Windows Forms projects. Also add a test project showing how to use
the CMakeLists.txt file and, when successfully configured, will allow
use of the designer for the included form.
This allows the ctest_build command's TARGET option to name a target
in a subdirectory and still build properly with msbuild.
Add test case covering use of ctest_build() with such a TARGET.
Add test covering cmGlobalGenerator::GenerateBuildCommand for VS
solutions with MSBuild and building a target defined in a subdirectory
and not part of ALL.
In particular, this checks that CTest's use of select() has a sufficient
file descriptor set size limit (FD_SETSIZE) to handle many child
processes at the same time. Running 20 tests requires more than 64
descriptors, the Cygwin default that we override.
Since commit e03f83f3 (ProcessorCount test: fix path to cmsysTestsCxx
executable, 2013-01-24) the directory references a target that is not
built when BUILD_TESTING is OFF. It makes no sense to add tests without
BUILD_TESTING anyway.
While at it, use add_subdirectory instead of subdirs to add CMakeTests.
Commit 79568f95 (automoc: Add source file to target early to set the
linker language, 2013-02-20) changed automoc initialization to a two
step process. In the first step, the generated source file was added
to the target, which allows the link language to be determined.
However, this bypassed the check for the availability of Qt itself.
At build-time the automoc file could not be generated because the moc
tool was not available to create it.
The solution is to only add the automoc file to the target if Qt is
found.
Extend the Module.ExternalData test to cover a DATA{} reference whose
name contains a space. Skip the case when the native build tool does
not support spaces.
Some make tools do not support spaces inside the source tree paths.
Decide early whether to add tests that depend on support for spaces so
we can use the result in a decision for any test.
All ctest --build-and-test invocations require the options
--build-generator ${CMAKE_GENERATOR}
--build-makeprogram ${CMAKE_TEST_MAKEPROGRAM}
to be passed and have consistent values, except for a few special cases.
Collect the generator options in a variable instead of repeating the
options everywhere explicitly.
5484c60 Merge branch 'vs6-rule-files' into add-ExternalData-module
1fd8d01 ExternalData: Attach download rules to content links in IDEs
a6d3ffc Fix Module.ExternalData test on VS 6
aed590a Fix Module.ExternalData test on Cygwin
06e8ded Merge branch 'fix-atomic-rename-on-Windows' into add-ExternalData-module
e2e0d2e ExternalData: Collapse ../ components in DATA{} paths
ee2abfd ExternalData: Add support for SHA 1 and 2 hash algorithms
aa8b228 ExternalData: Generalize hash algo/ext handling
9e518a8 ExternalData: Allow DATA{} syntax to reference directories
175ed02 ExternalData: Allow ()-groups in series match regex
4befecc ExternalData: Add tests covering interfaces and errors
bcd2580 ExternalData: Improve series matching using an explicit syntax
c0cebcb ExternalData: Remove unused private interface
5275993 ExternalData: Cleanup stray TODO and typo in comments
7bb8344 ExternalData: Do not match directory names when resolving DATA{}
00d801f ExternalData: Remove compatibility with CMake < 2.8.5
...
Run the test with the ctest --build-noclean option. The test
CMakeLists.txt file already uses file(REMOVE_RECURSE) to clean out
downloaded data anyway. Some file removed by "msdev ... /clean" causes
CMake to re-run in the middle of the build step and file(REMOVE_RECURSE)
wipes out already-generated files.
The test added by commit e378ba5f (Add CTestLimitDashJ test, 2012-12-26)
crashes with CTest compiled by Borland 5.8. There seems to be interaction
among the large number of internal ctest runs. It is probably related to
the undiscovered underlying issue mentioned in commit 32478069 (CTest:
Prevent creation of unbounded number of tests in ctest, 2012-12-18) when
fixing the symptom covered by the CTestLimitDashJ test.
Add --force-new-ctest-process to avoid the crash. Further investigation
will still be needed to identify the true problem.
Add a Module.ExternalData test to verify data retrieval and test
argument DATA{} references.
Add a RunCMake.ExternalData test to verify error handling and automatic
transformation of a raw data to a content link and staged object.
This means for example, that consumers can use:
target_link_libraries(foo ${QT_QTGUI_LIBRARIES})
instead of also needing to specify all 'public' dependencies:
target_link_libraries(foo ${QT_QTGUI_LIBRARIES} ${QT_QTCORE_LIBRARIES} )
when using the IMPORTED targets. Also populate the
IMPORTED_LINK_DEPENDENT_LIBRARIES property so CMake can help the linker
find shared library dependencies.
Add a test that verifies that when ctest -j 4 is called, at most, 4 tests
are executed at any one time.
The test works by running the same script as each of 100 tests. And then setting
up test properties for DEPENDS, RUN_SERIAL, PROCESSORS and COST in order to get
the tests to run in a semi-deterministic ordering, even in parallel. The script
writes a file, sleeps for a bit, and then deletes the file. In the meantime, it
counts files that currently exist, and emits output that triggers a test failure
if the count of files is ever greater than 4.
Prior to the commit that fixed bug #12904, this would result in a failed test
because the output of some of the tests would indicate that more than 4 tests
were running simultaneously.
Now that this issue is resolved, this test will help guarantee that it stays
resolved moving forward.
This new CPack generator produces an *.msi installer file.
Requires having the WiX Toolset installed in order to work
properly.
Download the WiX Toolset installer "WiX36.exe" here:
http://wix.codeplex.com/releases/view/93929
These tests were not running properly on Visual Studio or
Xcode dashboards before this commit because of the "Debug"
or "Release" sub-directory. The scripts already have
CMAKE_CPACK_COMMAND since the correct CMake executable is
used to run the scripts, so just use that, rather than
passing down an incorrect path to the CPack executable.
a41d3a4 ExternalProjectUpdateTest: Only support Git 1.6.5 and greater.
de760c1 ExternalProject: Verify when a fetch occurs during update test.
0a34433 ExternalProject: Make sure the ExternalProjectUpdate setup is available.
9b66c8f ExternalProject: Always do a git fetch for a remote ref.
2619f4d ExternalProject: Add tests for UPDATE_COMMAND.
378aa12 ExternalProject: Do smoke tests for Git Tutorial builds.
d075829 ExternalProject: Only run 'git fetch' when required.
This prepares the numberous tests that occur in the ExternalProjectUpdate
test. The tests were passing previously because a fresh build was not performed.
Tests are added for UPDATE_COMMAND to ensure it is working properly. Testing
infrastructure is added along with tests for Git, but tests for other version
control systems could easily be added in the future.
995a35f CTest: add a check with a quoted memory checker
de8bffc CTest: add a test for CTEST_CUSTOM_MEMCHECK_IGNORE
d26c9b6 CTest: improve memory checker type detection
fcae1da CTest: add tests that simulate memcheck runs
6187876 CTest: fix pre and post test commands with spaces
95bc8aa CTest: fix usage of memory checker with spaces in path
Move it out of the condition that also accepts MinGW/MSYS.
Teach the test to allow the Intel for Windows compiler but
do not verify the results because the compiler does not
seem to write PDB output in all cases.
This enables changing the name and output folder of the debug symbol
files produced by MS compilers.
Inspired-by: Thomas Bernard <thomas.bernard@ipetronik.com>
f0a1065 Rename files from main.cpp to more meaningful names.
ca7fb14 Fix the test setting COMPILE_DEFINITIONS target property
733deb6 Fix CompileDefinitions test on Visual Studio.
3dae652 Don't duplicate -D defines sent to the compiler.
There is no need to do so. Be consistent with include directories and
ensure uniqueness.
This requires changing the API of the cmLocalGenerator::AppendDefines
method, and changing the generators to match.
The test unfortunately can't test for uniqueness, but it at least verifies
that nothing gets lost.
Add generator expressions that combine and use boolean test results:
$<0:...> = empty string (ignores "...")
$<1:...> = content of "..."
$<AND:?[,?]...> = '1' if all '?' are '1', else '0'
$<OR:?[,?]...> = '0' if all '?' are '0', else '1'
$<NOT:?> = '0' if '?' is '1', else '1'
These will be useful to evaluate (future) boolean query expressions and
condition content on the results. Include tests and documentation.
After conversion of Modules .cmake files to lower case the
FAIL_REGULAR_EXPRESSION for this test matched warnings in modules other
than the test line itself. Make the pass and fail regular expressions
specific to the file containing the lines they are testing.
Ancient versions of CMake required else(), endif(), and similar block
termination commands to have arguments matching the command starting the
block. This is no longer the preferred style.
Run the following shell code:
for c in else endif endforeach endfunction endmacro endwhile; do
echo 's/\b'"$c"'\(\s*\)(.\+)/'"$c"'\1()/'
done >convert.sed &&
git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' |
egrep -z -v '^(Utilities/cm|Source/kwsys/)' |
egrep -z -v 'Tests/CMakeTests/While-Endwhile-' |
xargs -0 sed -i -f convert.sed &&
rm convert.sed
1fc8df9 Add missing this->.
7a3ecf5 Fix memory leak in Makefile generator.
9f7dc83 Ninja: also bootstrap ninja files
5d365b2 Ninja: enable ninja support everywhere
d569f3e Ninja: void function can't return a value
52160bf Ninja: enable ninja on Mac so all Mac CDash-builds are tested, cleanup later
56aeac6 Ninja: fixes for bcc
7a6bc9e Ninja: remove 'this' from member initializer list
44ba4cf Ninja: remove warnings
7751966 Ninja: remove 'friend' in ninja code
c3988ee Re-factor OS X content generator start up.
f8e0a51 Re-factor framework directory computation.
f36c7b0 Re-factor Mac OS X content directory computation.
5d885db Re-factor bundle content copying rules generation.
3b2a01e Ninja: Use same echo message as makefiles.
7bb56c5 Re-factor CFBundle generation.
...
b47cffa CPack: Use bin subdir when looking for dpkg and rpmbuild
a8c659c Find dpkg and rpmbuild in usual Fink and MacPort paths
848f220 Do not run cpack at CMake time it is not available.
cpack was used to get the list of available i.e. ACTIVE CPack generators
in the CMake tests suite. This was done in order to get dynamically
available CPack generators like DEB or RPM that may or may not be
available on some platform like MacOSX depending on the fact that
some command are installed or not. We may do that but not during
initial configuration.
The current patch fixes the problem and we may do better in the future
like configuring CPack tests later.
bd34963 Refactor generation of shared library flags
55d7aa4 Add platform variable for flags specific to shared libraries
31d7a0f Add platform variables for position independent code flags
CMAKE_SHARED_LIBRARY_<lang>_FLAGS has flags on various platforms for a
variety of purposes that are correlated with shared libraries but not
exclusive to them. Refactor generation of these flags to use new
purpose-specific platform variables
CMAKE_<lang>_COMPILE_OPTIONS_DLL
CMAKE_<lang>_COMPILE_OPTIONS_PIC
CMAKE_<lang>_COMPILE_OPTIONS_PIE
Activate the DLL flags specifically for shared libraries. Add a new
POSITION_INDEPENDENT_CODE target property to activate PIC/PIE flags, and
default to true for shared libraries to preserve default behavior.
Initialize the new property from CMAKE_POSITION_INDEPENDENT_CODE to
allow easy global configuration in projects.
Although the default behavior is unchanged by this refactoring, the new
approach ignores CMAKE_SHARED_LIBRARY_<lang>_FLAGS completely. We must
leave it set in case projects reference the value. Furthermore, if a
project modifies CMAKE_SHARED_LIBRARY_<lang>_FLAGS it expects the new
value to be used. Add policy CMP0018 to handle compatibility with
projects that modify this platform variable.
Add a PositionIndependentCode test on platforms where we can get
meaningful results.
More generally add the check for possible generator "activation" at
runtime depending on a generator specific check.
The dynamic behavior is currently implemented only for MacOS
and should be fully backward compatible for other system.
Inspired-By Tom Hughes <tomtheengineer@gmail.com>
Add "ObjectLibrary" test to build and use OBJECT libraries. Build
multiple object libraries in separate directories with different flags.
Use a custom command to generate a source file in one OBJECT library.
Reference the OBJECT libraries for inclusion in a STATIC library, a
SHARED library, and an EXECUTABLE target. Use the static and shared
libraries each in executables that end up using the object library
symbols. Verify that object library symbols are exported from the
shared library.
The CMakeCommands.build_command test performs output/error checking
so move it over to RunCMake to re-use the generalized infrastrucure.
This is the only test left using Tests/CMakeCommands/CMakeLists.txt
so remove it.
The CMakeOnly directory added by commit 9a20abf0 (Add infrastructure for
CMake-only tests, 2012-01-11) was sufficient only for tests that always
run CMake to successfully configure a project. Later commit eeaaffcb
(find_package: Test error and warning messages in failure cases,
2012-02-28) added a sample test that covers failure cases.
Generalize the above to create new "RunCMake" test infrastructure that
can run CMake multiple times for a single project with different
variations and check for expected result/stdout/stderr. Allow for both
successful and failing CMake project configuration cases. This will be
useful to test error messages and failure behavior.
b28e7fa VS6: Avoid SBCS test on VS6 (#12189)
df19b9c VS6: Avoid _MBCS define when _SBCS is defined (#12189)
ba89e92 Visual Studio: Allow setting Single Byte Character Set (#12189)
The previous commit, df19b9ca, assumed that the corresponding
_UNICODE functionality in the VS6 generator actually worked.
That turns out not to be the case. Unicode definition does not
actually suppress _MBCS definition, so neither does this new
code...
Don't test it here, since the patch submitter for _SBCS does
not need VS6 support.
If somebody needs _UNICODE and _SBCS support to suppress the
definition of _MBCS in the VS6 generator, it is work yet to do.
Patches welcome.
4689eed reflect that the QtAutomoc depends on QtGui
ab9661c Remove QtGui dependency in Qt4Deploy test and verify QtSql existance.
52e8279 Fix for Qt4Deploy on some test machines.
672e3bb Add test for DeployQt4.cmake
4853e1e Fix plugin installation issues.
35cbf23 Ensure libs are passed to BundleUtilities.
0ac1535 Fix bad plugin paths.
a2123e8 Fix mismatched arguments.
fc6f340 Don't use QT_LIBRARIES_PLUGINS by default.
${CMake_SOURCE_DIR} and ${CMake_BINARY_DIR} cannot be embedded into regex
directly. If they contain special regex metacharacters like +, the regex
will break. So just escape such metacharacters with a backslash before
embedding the path into the regex.
The issue affected the following tests: CTestTestConfigFileInBuildDir1 and
CTestTestConfigFileInBuildDir2.
For Visual Studio using the Preprocessor Define _SBCS. This behavior
is similar to the way that _UNICODE and _MBCS work already.
Added tests to confirm this behavior.
This patch adds a new module that allows for easy integration of MinGW
gfortran and the Visual Studio compiler. It is done in a function called
cmake_add_fortran_subdirectory. The patch also includes a test for this
feature.
Some tests only need to run CMake to configure and generate a build
tree, but not actually perform the build. Add a new "Tests/CMakeOnly"
directory dedicated for this purpose. Add a helper script to drive each
test by creating a fresh build tree and running CMake on it. Add macro
"add_CMakeOnly_test" to help create tests using the script.
53d31c2 complex: Remove unused option to test CMakeLib
c1789e6 complex: Remove test dependence on cmSystemTools
569cee1 complex: Move cmSystemTools::UpperCase test to CMakeLibTests
49d6dd6 complex: Simplify test for single-character exe name
76ac88b complex: Move GeneratedFileStream test to CMakeLibTests
137e597 complex: Remove dynamic loader tests
6337920 complex: Sync Tests/ComplexOneConfig with Tests/Complex
6a75821 complex: Remove ancient unused ComplexRelativePaths test
This adds a test that uses two project commands in the same CMakeLists.txt
file. It also adds a fix so that cmake --build will work in that case.
The fix sets the name of the last project command in the top level
CMakeLists.txt in the cache variable CMAKE_PROJECT_NAME. This variable
is used by cmake --build to find the project name.
c71f7ab Tests: Avoid MFC test automatically for Watcom WMake builds (#11213)
a42e3f2 Tests: Fix MFC test for old vs6 dashboards (#11213)
b297da6 Tests: Fix MFC test w/ Make-based generators (#11213)
54595e6 Tests: Avoid MFC test automatically for VCExpress builds (#11213)
36b0c43 Tests: Add the MFC test (#11213)
Build a simple, do-nothing VS 7.1 MFC wizard generated app
with CMake.
Build it two different ways via ExternalProject, one with
CMAKE_MFC_FLAG set to 1 for linking to MFC statically, and
one with CMAKE_MFC_FLAG set to 2 for linking to the shared
MFC dlls.
Validate that the install tree of the static build has only
one *.exe file in it and nothing else. Also validate that the
install tree of the shared library build has multiple files in
it (no less than 3) and that they are only of the expected types
*.exe, *.dll and *.manifest.
This commit does not address the issue reported in #11213,
it merely adds a test that may be used to show that the
bug report is valid. After this commit, the MFC test should
fail on any dashboard machines that have MSVC defined, but
cannot build an MFC app. We can then analyze that failure
data as input to solving the issue.
Provide the ability to configure CTest with settings different from the ones
available in the source tree by checking first if CTestConfig.cmake
exists in the build tree.
The motivation is to allow build system checking out external project to
test and/or package them and submit the associated results to a different
dashboard than the one specified (or not) in the source of the external
project.
For example, the build system of Slicer can checkout, build, test
and package what I will call "extensions". These extensions can be developed
by third parties who can test and submit to their own dashboard / project.
When checked out by Slicer build system, the default dashboard can now be
overwritten by adding a custom CTestConfig.cmake to the build directory.
And if not overwritten, it would avoid to create CTestConfig.cmake within
the source checkout of the extension.
67fcc83 Simplify IntelVSImplicitPath detection project
a7ce26d Move IntelVSImplicitPath project to better location
539a822 Enable Fortran tests for IDE builds.
555f589 For VS Intel Fortran IDE builds, add a check to find the Fortran library PATH.
71402eb FortranCInterface: Compile separate Fortran lib in VerifyC[XX]
One of the dashmacmini5 runs of this test results in an
"Illegal exception" detected instead of a segfault. For
the purposes of this test, we're going to say that either
is a "crash."
6a6393c Don't use a variable name that might be used in other files.
5ca8c56 Fix up verbatim code sections of the dox.
75596e6 Don't start a line with a dash(-)
826374a Remove blank line at the start of the file.
8b9b8e1 Add documentation about the prefix and no_deprecated options.
51bc63a Fix the feature of using a specific prefix for macros.
3449f6b Add quotes in case cmake is installed in a prefix with a space.
36d28f2 Fix Compiler id variable name.
99b2aab Disable the tests for Watcom.
7ac0ab1 Quote paths in case there is a space in one of them.
89108b9 Look for errors reported by PGI too.
e0cc024 Add missing NO_EXPORT macro variant.
1b031d1 More consistency in the macro options.
03d60c7 Try to make the macros do almost nothing for Watcom.
6adeda9 Possibly fix configuration test on AIX.
e253348 Possibly fix test on HPUX.
32eff0c Test for too-old-intel compilers.
42154ec Fix up the regex command for Intel.
a147a06 Add some settings for non-truncation of test output.
bf73e75 Hopefully add version extraction for Intel.
aa4f0b6 Fix the version extraction regex for clang.
a493d1a Test the correct cxx variable.
b6ee2ee Comment the test assertion for now
a9a8b9e Exclude win32 from hidden visibility checks.
afae7a9 Start testing expected values for compiler flags.
1ae3365 Exclude PGI from exports and deprecated.
f426496 Exclude cygwin from the hidden visibility feature.
f84c7db Don't enable deprecated on old GCC
9672b33 Don't enable deprecated on HP.
10d8c44 Disable testing of deprecated macros.
97392a7d Fixup forgotten part of aed84517c92aeab4f Borland can't do deprecated.
c41c68b Try to error on deprecated on Intel and SunCC.
aed8451 Test for deprecated attribute before declspec.
c448b09 Perform the -Werror test only once.
fb88c6e Add some messaging output to make remaining issues findable.
01e9e98 Test -Werror instead of enabling it per compiler.
9aab2aa Expect the tests to pass if hidden visibilty is not enabled.
856bdb3 Don't change the expected build result based on the platform.
df4615e Add the COMPILER_HAS_DEPRECATED only if it has a declspec variant
78a6e1c Exclude the XL compiler from the hidden-visibility test.
e1f7ee3 Test for compiler features, instead of for specific platforms.
9554e10 Split the deprecated available check from setting macro values.
1590d5f Don't export methods on already exported classes.
750b67c Don't use hidden visibility on non-mingw windows either.
1f3be45 Make sure the hidden visibility variables never get set on MINGW.
399f415 Only set the deprecated attribute if hidden visibilty is enabled.
1c6b41b Remember to surround the other deprecated test in the Borland check.
3f7e036 Export deprecated free methods too.
7fa5592 Add some debug output to narrow down deprecation test issues
7924c1d Another attempt at fixing Borland.
50460ea Fix off-by-not in test for Borland.
b443459 Use the correct project name compiletest not compilefail
fc3772e Another attempt to fix the tests on Borland.
bab4a22 Disable all export macros on Borland.
cff9493 Only set the COMPILER_HAS_HIDDEN_VISIBILITY if GCC >= 4.2
af443b8 Set the CMAKE_RUNTIME_OUTPUT_DIRECTORY for windows builds.
61726f8 Only run the failure tests with gcc >= 4.2
002ddf2 Fix typo and tests failing as a result.
4443037 Fix tests with clang.
ffaa127 Test expected no-op instead of aborting the build.
6aca0e2 Short-circuit the tests on unsupported compilers.
d123bce Add some debug output.
3574b75 Simplify the compiler feature check
c7a937b Simplify. We already know we have hidden visibility at this point.
3b188c8 Test for features, not specific compilers.
4718233 Remove the fatal_warnings option which is no longer used.
b19911e Add missing licence header.
706ed2b Add a newline at the end of the file.
8963716 Add a newline at the end of the file.
def0a54 Handle the case where the user changes the DEFINE_SYMBOL property.
3088070 Add the GenerateExportMacro with unit tests.
59238dc Fix --find-package mode on Cygwin, where enable_language(RC) is called
98472e4 Require the current cmake version in --find-package mode
a6ccf3c Use $(CXXFLAGS) and $(LDFLAGS) in the --find-package test Makefile
4386918 Fix line length
7d69310 Only enable the test when using GNU make
3011149 Make the test harder by always having a space in the include dirs
ab57ff6 Make the --find-package test harder
626fc71 Much improved test, should now be executed on all UNIXes
ec6982d Disable any STATUS output in --find-package mode
e552ae7 Dont check for -isysroot and -mmacosx-version on OSX in --find-package mode
e589589 Rename helper macros print_compile_flags() to set_compile_flags_var()
aecfc1f Fix test on OpenBSD with BSD make
6bb4ca3 The makefile for the test was kindof wrong
fd15b5e Only run the test if we are using a makefile generator under UNIX
9fc87c6 Add a test for the new --find-package mode
d3ae0ff Improve documentation for --find-package mode
bf07375 Add a cmake.m4 for using cmake in autoconf projects instead of pkgconfig
b0e3578 Use the file-utility to test for 64bit if there is no /usr/lib64
53edfb2 Better support for lib64 and Debian multiarch
b8fdaa1 Fix copyright notice in new CMakeFindPackageMode.cmake
7690edf Replace cmake::GetScriptMode() with GetWorkingMode()
e4f603b Implement find-package mode of cmake
a91d662 Add find-package mode, which does nothing yet
b976e70 Make clLocalGenerator::GetTargetFlags() public
920a046 QtAutomoc: Eliminate compiler warning
b00463f QtAutomoc test: Pass QT_QMAKE_EXECUTABLE
e78ce44 Fix automoc with VS builds: apply patch from Bill
71165e9 Silence warning in automoc: use long instead of int
1879bcc Fix build: use std::ios::out|ios::trunc instead of std::ios_base::out
678e124 Only enable the automoc test after checking that Qt4 works
71c29d1 Fix bootstrap test with automoc
afb3edc Fix warnings
add30e9 Fix build: non-void function must return a value
7e6d845 Automoc.cmake is not needed anymore
2963d0b Fix logic which decides when to execute automoc test
77a5c6e Add documentation for AUTOMOC, add initialization via CMAKE_AUTOMOC
bf8ef77 Add a test for automoc
d045fd4 Nicer progress message for the automoc target
50cd6ce Move automoc processing from add_executable/library to cmGlobalGenerator
cbaac2a Remove trailing whitespace
c27607b Refactor SetupAutomocTarget() so it can be run after creating the target
24d9b7d Remove trailing whitespace
58b7fe6 Use cout instead of printf()
72caf4d Add the generated automoc.cpp file to the cleaned files
ddb517d Color output when running moc
9303295 Initialize verbose based onb the env.var.
ace1215 Move code for parsing a cpp-file from the big loop to separate function
735a5bb Fix line lengths
83b730c Add AUTOMOC to the add_library() command
126c6ea Add the cmake module required currently for automoc
de91feb Remove the need to check for .h/.cxx during buildtime
d65689a Add actual automoc code from automoc
d1c0a5f Start implementing skeleton for automoc in cmake
a65011b Start work on automoc: add empty cmQtAutomoc class
On some systems which contribute nightly builds there were strange
errors which seemed to hint that the installed Qt4 is not usable/
not usable with this compiler. So first check whether it works,
and only if this was successful, enable the test.
Alex
For custom commands in VS2010 Fortran projects the INTDIR variable
is different than in the rest of the solution because Intel
fortran still uses the old VS project files even in VS2010. So,
we replace $(Configuration) directly in the project files. I have also
added a FortranOnly test that tests this feature and is run on any
generator that has Fortran abilities.
1417a55 Java: Fix documentation format and indentation
0b7627d Java: Use set_property/get_property for target variables.
b01a505 Java: Create correct jar archive dependencies.
f99c312 Java: Added some dependency magic to avoid recompilations.
f3233ba Java: Create java_class_filelist only if it does't exist.
a22ed3d Tests: Check for the new Java exeutable variables.
c177c8e Tests: Java tests should test UseJava.cmake
5c2106c Modules: Added CMake Java support.
a4b6275 FindJava: Find missing java development executables.
When add_test(NAME) is called without the CONFIGURATIONS argument then
the test is intended to run in any configuration. In multi-config
generators like the VS IDE and Xcode tests created by add_test(NAME) can
only be run when testing a known configuration (otherwise there is no
way to generate the test command line). If no test command line is
known for a particular configuration, or if no configuration is given to
ctest, report the test as not run instead of silently skipping it.
Also fix CMake's own TestsWorkingDirectory test invocation to correct a
previously silent failure exposed by this change.
51e16c0 BundleUtilities: Avoid test on Watcom dashboards (#12034)
41f962a Revert "BundleUtilities: Run test on Windows if either MSVC or dumpbin was found."
e17135e BundleUtilities: Add rpath to loadable modules in test.
8064044 BundleUtilities: Print reason for not loading module.so
f3de459 BundleUtilities: Run test on Windows if either MSVC or dumpbin was found.
900bf98 BundleUtilities: Disable running test on Windows unless using MSVC.
fa4dc08 BundleUtilities: Fix issues with custom target DEPENDS in test (#12034)
e40b79e BundleUtilities: Fix test when using xcode (#12034)
b68d3dc BundleUtilities: Fix regex to extract dependents from ldd (#12034)
7ac7b43 BundleUtilities: Work w/ non .app exes on Mac (#12034)
Also add a test of BundleUtilities including an exe,
some shared libs, a plugin, and a framework-style lib.
This test presently runs (and this functionality works)
on Linux, Mac and Windows.
For now, the framework-style lib is built as a plain old
shared lib because there is another yet-unresolved issue
with local frameworks without rpaths on the Mac.
3e32db7 cmCTestUploadCommand::CheckArgumentKeyword should return false if not FILES
6b6f309 Add the FILES keyword to ctest_upload command
28cdd0a Don't tar/gz ctest_upload() files
fbe4356 Change 'Files' tag to 'Upload' in Upload.xml
350546d Implement ctest_upload command
The parent commit 46c0a583 (Enable Java test more carefully on Apple,
2011-03-18) failed to restore the exclusion of Xcode when enabling the
Java test that was originally removed by commit c8f39193 (Avoid problem
reading jni.h on Macs, 2010-10-25). The Xcode generator does not work
with the current Java support at all.
The CTEST_RUN_Java option added by commit c8f39193 (Avoid problem
reading jni.h on Macs, 2010-10-25) was a quick hack to disable the Java
test on Mac machines after an update from Apple created a broken jni.h
symlink. Remove the option and instead test whether jni.h exists as a
readable file before reading it. This restores the original Java test
enabling logic but makes it robust to the broken symlink.
Add "LinkStatic" test that links a static executable against "libm.a".
Pass both "/usr/lib/libm.a" and "-lm" to target_link_libraries to
trigger the link type logic for both cases. If CMake incorrectly
switches the link type to shared for "-lm" then the link will fail.
Since commit 024d05ad (Fix use of module .def files for MS tools,
2009-09-29) module .def files work for any platform that sets
CMAKE_LINK_DEF_FILE_FLAG correctly. Set it in the Windows-GNU platform
information file to enable support with MinGW tools. Also enable the
test added by commit 0db2c850 (Test use of module .def files for MS
tools, 2009-09-29) for MinGW and MSYS generators.
dd2f814 Merge branch 'dev/add_test-working-directory' into dev/strict-mode
949d32c Unwatch manual variables upon removal in cmake-gui
3939032 Unwatch manual variables upon removal in ccmake
8354413 Add method to unwatch a manual variable
8ed3c85 Give a better message for unused variables
729db48 Fix ArgumentExpansion test expected results
89c2544 Checking for a definition is a usage
5625dee Don't output to stderr in the GUI
ad25a96 Merge branch 'ImprovedDotSupport2' into dev/strict-mode
c128abe Merge branch 'AddCMAKE_CURRENT_LIST_DIR' into dev/strict-mode
9bcaff0 Merge branch 'cmake-guiRememberAdvancedCheckbox' into dev/strict-mode
544d0c3 Fix expected output for WarnUninitialized test
4e3bea4 Update expected messages to new format
8e8c9e4 Don't check at destruction for usage
668e005 Use cmake::IssueMessage for warnings
88cd4c1 Use 'CMake Warning' versus 'warning' for CDash
3c3b98d Initialize the class before setting warn flags
cf8b15a Ignore files under the CMakeFiles directory
fd50f06 Don't check for unused vars at configure time
447a04c Don't warn during configure when doing everything
b97ee21 Check for unused variables at the end of generate
c18c977 When checking for variables, specify a reason
3f1121f Use a long int since Line is a long as well
2507f93 Change the failure case string to 'Unexpected'
fe390a2 Add 'ArgumentExpansion' test
8dbb209 Wrong boolean value for CLI warnings
d4ee998 Hard-code the --no-warn-unused-cli flag
a267b99 Fix line lengths
82ed104 Flag that the directories have been set
5aa535b Add argument to arg parsing to not set directories
367e5c3 Revert "Revert "When calling CMake, set the args and the cache""
ab5d4e4 Revert "When calling CMake, set the args and the cache"
9b90040 When calling CMake, set the args and the cache
fe56002 Fix long lines for KWStyle
5d30cfc Set a watch on variables added through the gui
33c63b1 Add a method to put a watch for variables
535253f Initialize the warning variables earlier
cbb286c Fix the path detection to work for top-level
62be1f7 Initialize the usage stack earlier
c6e7fab Factor out the checks for unused variables
5e41ba8 When using the API, check for Add vs. Remove
dee1976 Fix typo in VariableUnusedViaUnset test
f231ce5 Remove old false positive avoidance code
a117e02 Revert "Add test for unused warnings at the end of scope"
2c82f2b Exempt CMAKE(CURRENT|PARENT)_LIST_FILE from usage
6d7d449 Ignore CLI warnings for ABI determination
7740a73 Only return local keys that are defined
bef3aee Use the API so that warnings can be tracked
05cb0f4 Check for unused variables in the dtor
91c4c99 Add test for unused warnings at the end of scope
ca90f67 Fix detection of unused variables when setting
f7438ca Add test for unused detection via setting it
995cfb0 Don't warn if the variable wasn't defined
aefc91d Add test for usage checks via unset
a8e97f8 Remove VarRemoved code since it's been superceded
59463ef Rework CheckVariableForUnused usage
f117423 Fix line lengths to be no more than 78
e49a935 Improve unused warning logic
e01e40c Mark ARGC, ARGV*, and ARGN as used
a17aff7 Ignore CMAKE_MATCH_* variables for usage
02a114d Add method to allow variables to be marked as used
a0b0d23 CMAKE_DO_TRY_COMPILE is no longer used
ae3eff3 Fix the path used for ignoring system warnings
056b441 Fix missing case for usage of a variable
980e048 Factor out checks for unused variables
83acb0a Remove now unused variables
3801463 Use built-ins for readability and maintainability
8b52015 Push the initialize and unused states when copying
439877f Be consistent with single and double quotes
4cf1706 Add documentation for check-system-vars
b74777f Fix the spelling of the flag for warn-unused-vars
b948120 Change logic of flag to turn off cli unused checks
f047a17 Add test for uninitialized variables
75bda38 Add tests for unused command line variables
300fc15 Fix detection of system files
d784e6a Run the unused variables check on the final pass
9efc057 VariableWatch is not available when bootstrapping
2e78224 Add a missing comma to the warning message
7499700 Add a flag to warn about system files
fff9f6d Rename flags again and use variablewatch for cli
786e269 Add warn-unused to the Qt interface
636e6c4 Default to marking things as used
4ff0340 Rename find-unused to warn-unused
d7999e9 Rename strict-mode to warn-uninitialized
e141bc9 Detect unused variables
d3e8eb5 Add flags to detect unused variables
f332e14 Complete strict-mode checks for uninitialized vars
52f9637 Add method to get the local scope variables
f794d58 Make --strict-mode option, and integrate with cmake-gui
48b5b85 Add a warning when variables are used uninitialized.
cd626ea For macros make sure the FilePath points to a valid pointer in the args.
aeb6cd8 Merge branch 'honor-explicit-zero-timeout' into resolve/mingw-cross-compile-resources/honor-explicit-zero-timeout
20d87c8 Teach Simple_Mingw_Linux2Win test to use windres
This test was broken by commit b2f308c8 (Add support for windows
resources with mingw/msys, 2010-12-22) because the test does not set a
resource compiler which is now required on MinGW for the 'RC' language.
Use windres as the resource compiler for the test.
Teach the ArgumentExpansion test to expect flattened lists as has always
been the case in the CMake language. Now that the test should pass
enable the failure regex even when CMAKE_STRICT is not on. Replace the
reference to the old ArgumentExpansion test behavior in the workaround
comment in cmMakefile::TryCompile with a full inline explanation.
e33cbda VSMidl Test: Use correct include_directories with VS6 (#11461)
262da91 Prohibit space in HOME value for VSMidl test.
13caaa3 VS10: Finish Midl support (#11461)
Previously, it was hard-coded at 1000 seconds. Now it uses
the value of CMAKE_LONG_TEST_TIMEOUT, which has a minimum
value of 1500 seconds, but might have a longer value depending
on the CTEST_TEST_TIMEOUT value of the driving dashboard.
This should help avoid test failures on overloaded dashboard
machines where it really does take that long to finish the
test successfully.
This commit addresses all of the following:
http://public.kitware.com/Bug/view.php?id=8165http://public.kitware.com/Bug/view.php?id=10687http://public.kitware.com/Bug/view.php?id=11311http://public.kitware.com/Bug/view.php?id=11461
With this commit, the midl support for VS10 is as
complete as midl support ever was for VS9 and earlier.
The VSMidl test should run on all Visual Studio
generator based dashboards.
CMake no longer sends C++ compiler /D flag values
to the midl compiler in Visual Studio generated
projects. I think if we want to add that in the
future, we should add a way to pass midl compiler
specific flags and perhaps an optional way to add
in the C++ definitions, too. For now, not sending
them along gets past the immediate problem wherein
idl files in a CMake VS generated project just didn't
work at all.
The VSMidl test added in this commit was inspired by
the patch attached to 8165.
The test had to be modified such that it will run in
a directory whose name contains no spaces. There is an
existing bug filed against VS10's midl asking Microsoft
to fix that problem. But for now, the test added in this
commit works by copying the source directory to a location
that avoids spaces in the directory names.
Inspired-By: Robert Lenhardt
971692c Build enable_language command during bootstrap
960ace1 Add testing for windows resources for mingw/msys/cygwin and remove for watcom.
060d6e8 Add support for windres to cygwin.
b2f308c Add support for windows resources with mingw/msys.
8c7b19d Only run resource test for MSVC compilers.
753e208 Disable incremental testing for this test, it crashes vs9 linker.
16e7d4b Add flags to resource builds on vs 2010 with a test.
667a90a Fix sentence break in add_test documentation
96309fc Make TestsWorkingDirectory test a C file
a4a5e37 Use iostream to make Borland happy
cfe53cd Fully specify the path to old-signature add_test
017d4e9 Group adding tests with its properties
561cc33 Only test the default cwd with Makefiles
d87bae7 Simplify the _default_cwd derivation
992c74f Use --><-- markers to denote the path
5249551 Flip slashes around on Windows
0a014da Add ctype.h include for toupper()
af12f83 Fix header includes for C++ and Visual Studio
5597aa2 Rename the project to match the test
9bf4165 Add tests for WORKING_DIRECTORY arg to add_test
42de5d0 Add WORKING_DIRECTORY argument to add_test
7679f9f Rename WorkingDirectory test
d95f817 Add the WORKING_DIRECTORY property to tests
A cycle exists when the DFS returns to the root node, not just when
multiple paths lead to the same node.
Inspired-By: Alexander Esilevich <aesilevich@pathscale.com>
f6f3ae5 Update tag in the Contracts/cse-snapshot test.
1e4fd5f Enable overriding contract test timeout values.
c81ad34 Add a contract test for building the CSE.
942ace8 Fix contract test so it is not hard coded to the vtk542 test.
fd343a1 Add a "Contract" test for VTK. The test downloads and builds VTK.
Apple released an update recently in which there
was a broken symlink for jni.h that pointed to
a non-existent file. CMake had trouble configuring
because it encountered an error trying to read
jni.h.
We avoid the problem here by introducing a variable
CTEST_RUN_Java, which defaults to OFF on Macs, that
indicates whether to even attempt finding java, reading
jni.h and adding the "Java" CMake test.
If you would like to test Java on a Mac where the
jni.h symlink is not busted, feel free to pass in
-DCTEST_RUN_Java:BOOL=ON when configuring CMake.
Use a longer value as the default timeout (6 hours).
For a per-contract-test timeout value, set ${project}_TEST_TIMEOUT
in the project's RunTest.cmake file. To use a longer value for
all non-specific contract tests, set a CMake cache variable
named CMAKE_CONTRACT_TEST_TIMEOUT_DEFAULT.
All timeout values are in seconds.
Also, patch up last commit to defer evaluation of ENV{HOME}
until EnforceConfig.cmake is included at ctest time. This
allows Windows machines to have "\\" characters in the HOME
environment variable if they want to.
To activate the CSE contract test on a given Linux
machine's CMake dashboard, put
CMAKE_CONTRACT_PROJECTS:STRING=cse-snapshot
in the CMake dashboard's initial cache.
The chosen snapshot does not generate subproject
dependency info right now. That code was in a
previous revision in the CSE's svn repo that
apparently has not been merged into the present cse
git repository master branch. After that is fixed up
in the cse repo, we can update the tag here so that
the snapshot built here can run a sub-project based
dashboard script. For now, it runs as one big build
step, building 'all'.
The idea is that we can make sure that CMake is staying backwards
compatible by testing projects against CMake as the changes are made
in CMake. Because these tests will take a long time to run, they
will not be enabled by default. Instead, they will be enabled by
putting a cache variable into CMake.
This command allows a user to quickly see the list of all available
test labels. The labels are also printed in verbose show only mode,
alongside their corresponding tests.
Pass the test when there is "Submission problem" in the output. This is
at least applicable to XMLRPC. Full error message is below:
------
Submission problem: Curl failed to perform HTTP POST request. curl_easy_perform() says: <url> malformed (-504)
.
Problems when submitting via XML-RPC
------
38c762c Merge 'remove-CTestTest3' into ctest-file-checksum
46df0b4 Activate retry code on any curl submit failure.
8705497 Checksum test should use CMAKE_TESTS_CDASH_SERVER
d0d1cdd Mock checksum failure output for old CDash versions
af5ef0c Testing for CTest checksum
86e81b5 CTest should resubmit in the checksum failed case
d6b7107 Fix subscript out of range crash
082c87e Cross-platform fixes for checksum/retry code
e525649 Checksums on CTest submit files, and retry timed out submissions.
The CTestTestFailedSubmit-http test was failing on the
hut11 Experimental dashboards with "Empty reply from
server" due to a localhost settings change.
At this point, CTestTest3 causes more problems than it's worth.
It uses CVS to grab a remote (over the network) copy of kwsys
code for testing. This causes some sort of problem nearly every
night on the nightly CMake dashboards. Worse: it causes problems
on different machines on different nights, then the next day, it's
fine again. So: remove this test and monitor the coverage.
If we lose a significant portion of code coverage, I will revert
this commit and re-activate the test. However, if we do not lose
a significant portion of code coverage, I will remove the code
for the test as well as removing it from the CMakeLists.txt file.
Brad King and I discussed this over the last few weeks, and we both
think we have sufficient coverage of all the checkout and update code
in other locally (non-network) based tests.
On the other hand, even if we do take a mild hit on coverage temporarily,
it should be relatively easy to increase our coverage again by adding
bits to those other locally based tests.
The bootstrap script works under MSYS, so test it. Use a launcher batch
file since 'ctest --build-and-test' is a Windows program and will not
honor the shebang line in the script.
Even though this test is checking that the ctest running it can handle
test output without newlines we should run the just-built CMake binary.
This allows the MemCheck test mode to check the correct CMake.
Add a LinkFlags test series to check that these properties work. Since
no link flag is accepted everywhere we test for presence of flags by
adding a bad flag and looking for the complaint in the test output.
Brad King
Stephen Kelly
Rolf Eike Beer
Modestas Vainius
Clinton Stimpson
John Farrier
Petr Kmoch
Paul Kunysch
Michael Tänzer
David Cole
Nils Gladitz
Matt McCormick
Yuchen Deng
Alex Neundorf
Marcin Wojdyr
Kitware Robot
Nicolas Despres
Eric NOULARD
Bill Hoffman
Aaron C. Meadows
Peter Collingbourne
Jean-Christophe Fillion-Robin
Manuel Klimek
Andreas Schneider
Zach Mullen
M. Konrad
Richard Bateman
Ben Boeckel