Reference OBJECT libraries for inclusion in targets that have no other
sources to verify that the linker language propagates correctly from the
object libraries. Test with a STATIC library, a SHARED library, and an
EXECUTABLE target. Use the static and shared libraries each in
executables that end up using the object library symbols.
In VS 6, 7, and 7.1 add a dummy object file to convince the IDE to build
the targets without sources. In Xcode add a dummy source file to
convince it to build targets without sources.
Teach the RunCMake.ObjectLibrary test to verify that languages used in
an OBJECT library are propagated to targets that use it so that the
languages can be included in link analysis.
Add "RunCMake.ObjectLibrary" test to verify that unsupported use cases
are rejected with errors:
* An OBJECT library may not reference another object library
* An OBJECT library may not be referenced in target_link_libraries
* An OBJECT library may not contain non-compiling sources
* An OBJECT library may not have pre/post build/link commands
* An OBJECT library may not be installed, exported, or imported
Also verify that invalid $<TARGET_OBJECTS:...> expressions are
diagnosed.
Add "ObjectLibrary" test to build and use OBJECT libraries. Build
multiple object libraries in separate directories with different flags.
Use a custom command to generate a source file in one OBJECT library.
Reference the OBJECT libraries for inclusion in a STATIC library, a
SHARED library, and an EXECUTABLE target. Use the static and shared
libraries each in executables that end up using the object library
symbols. Verify that object library symbols are exported from the
shared library.
55b2aa8 Use generalized RunCMake test infrastrucure for build_command test
eb33000 Use generalized RunCMake test infrastrucure for find_package test
42a81e7 Add stronger infrastructure for CMake-only tests
The CMakeCommands.build_command test performs output/error checking
so move it over to RunCMake to re-use the generalized infrastrucure.
This is the only test left using Tests/CMakeCommands/CMakeLists.txt
so remove it.
The CMakeOnly directory added by commit 9a20abf0 (Add infrastructure for
CMake-only tests, 2012-01-11) was sufficient only for tests that always
run CMake to successfully configure a project. Later commit eeaaffcb
(find_package: Test error and warning messages in failure cases,
2012-02-28) added a sample test that covers failure cases.
Generalize the above to create new "RunCMake" test infrastructure that
can run CMake multiple times for a single project with different
variations and check for expected result/stdout/stderr. Allow for both
successful and failing CMake project configuration cases. This will be
useful to test error messages and failure behavior.
b28e7fa VS6: Avoid SBCS test on VS6 (#12189)
df19b9c VS6: Avoid _MBCS define when _SBCS is defined (#12189)
ba89e92 Visual Studio: Allow setting Single Byte Character Set (#12189)
d662dff Fix shadowed variable warning on dashboard results
f66e735 Fix compiler warning reported on older Borland dashboard.
d90eed4 Fix compiler error reported on older Borland dashboard.
8233636 Update the documentation regarding INCLUDE_DIRECTORIES.
d899eb7 Call ExpandVariablesInString for each target's INCLUDE_DIRECTORIES
c21db87 Make search paths ordered and unique
22021f0 Remove cmMakefile::GetIncludeDirectories
9106b56 Extract and use the INCLUDE_DIRECTORIES target properties.
840509b Keep the INCLUDE_DIRECTORIES target property up to date.
a4d5f7b Add API to get the ordered includes for a target.
8adaee2 CMake: Eliminate cmMakefile::IncludeDirectories
7620932 Remove include flags memoization.
97a5faa Make it safe to call this method without creating duplicates.
edd5303 Refactor GetIncludeFlags to take includes instead of fetching them
The function configure_package_config_file() may be used instead of
configure_file() for generating the Config.cmake files for installation,
they help to make those files relocatable.
Alex
The previous commit, df19b9ca, assumed that the corresponding
_UNICODE functionality in the VS6 generator actually worked.
That turns out not to be the case. Unicode definition does not
actually suppress _MBCS definition, so neither does this new
code...
Don't test it here, since the patch submitter for _SBCS does
not need VS6 support.
If somebody needs _UNICODE and _SBCS support to suppress the
definition of _MBCS in the VS6 generator, it is work yet to do.
Patches welcome.
4689eed reflect that the QtAutomoc depends on QtGui
ab9661c Remove QtGui dependency in Qt4Deploy test and verify QtSql existance.
52e8279 Fix for Qt4Deploy on some test machines.
672e3bb Add test for DeployQt4.cmake
4853e1e Fix plugin installation issues.
35cbf23 Ensure libs are passed to BundleUtilities.
0ac1535 Fix bad plugin paths.
a2123e8 Fix mismatched arguments.
fc6f340 Don't use QT_LIBRARIES_PLUGINS by default.
The MSYS cvs tool interprets "c:/" as a "machine:" name for SSH. Detect
the MSYS cvs by looking for the string "msys" in the executable file
itself. Then convert the repo path to an MSYS path such as "/c/...".
Fix both the CTest.UpdateCVS and ExternalProject tests that use local
CVS repositories.
eeaaffc find_package: Test error and warning messages in failure cases
52dffb9 Merge branch 'test-CMakeCommands' into find_package-improve-messages
d365104 find_package: Optionally warn when implicitly using Config mode
31ead5f find_package: Reject mixed use of MODULE- and CONFIG-only options
6d83083 find_package: mention requested version number in error message
9c39bbd find_package: add CONFIG mode keyword alias for NO_MODULE
f310f67 find_package: add MODULE mode to use only Find-modules
7d67dcf find_package: improve error message when no Find module is present
978d89b find_package: rename NoModule to UseFindModules
We no longer support CVS checkouts from the Git repository.
Drop the case from the CheckSourceTree test. This will also
prevent the test from running and failing when CVS is found
but Git is not.
Add a "CMakeCommands.find_package" test to run CMake on a bunch of cases
in which find_package fails. Check that the process return code and
warning/error messages are as expected. Record expected test output in
corresponding files for reference by the check. These files will also
serve as a reference for the message text in each case.
${CMake_SOURCE_DIR} and ${CMake_BINARY_DIR} cannot be embedded into regex
directly. If they contain special regex metacharacters like +, the regex
will break. So just escape such metacharacters with a backslash before
embedding the path into the regex.
The issue affected the following tests: CTestTestConfigFileInBuildDir1 and
CTestTestConfigFileInBuildDir2.
Eliminate callers of cmMakefile::GetIncludeDirectories.
All callers of GetIncludeDirectories should go through the local generator
object.
Only the local generator calls cmTarget::GetIncludeDirectories directly.
35c48e1 Check*.cmake: Expand imported targets in CMAKE_REQUIRED_LIBRARIES
61cb4ea bootstrap: move while() and endwhile() into the bootstrap build
c9f2886 -don't pull in CheckTypeSize.cmake from the cmake which is being built
628f365 -remove trailing whitespace
Add the function cmake_expand_imported_targets() to expand imported
targets in a list of libraries into their on-disk file names for a
particular configuration. Adapt the implementation from KDE's
HANDLE_IMPORTED_TARGETS_IN_CMAKE_REQUIRED_LIBRARIES which has been in
use for over 2 years. Call the function from all the Check*.cmake
macros to handle imported targets named in CMAKE_REQUIRED_LIBRARIES.
Alex
For all current build machines the modules FindPkgConfig, FindFreetype, and
FindLibXslt return a version number. Enforce this to early catch when this
is not always the case.
This did not work because find_library() did only treat the given name as
complete filename if is matched "PREFIX.*SUFFIX":
find_library(MYLIB libfoo.so.2)
Now it is also taken as a whole if the name matches "PREFIX.*SUFFIX\..*".
If a variable exists called CMAKE_PROJECT_<projectName>_INCLUDE,
the file pointed to by that variable will be included as the last step
of the project command.
For Visual Studio using the Preprocessor Define _SBCS. This behavior
is similar to the way that _UNICODE and _MBCS work already.
Added tests to confirm this behavior.
We do not yet support "make install" in the external project case.
Document this explicitly in the interface. Require the caller to use an
option to "disable" the unsupported behavior. This will allow us to add
the behavior by default in the future without clobbering existing
projects that handle the installation themselves.
cmake_add_fortran_directory uses imported targets when using the
mingw fortran compiler. This change makes those targets global
in scope so they act just like the real targets that exist when
a fortran compiler exists and regular add_subdirectory is used.
The SunPro compiler does not add the fortran runtime library when
creating a shared fortran library. Link to the SunPro Fortran runtime
libraries explicitly.
Fix the implementation to allow full paths with spaces. Change the
interpretation of relative paths to be with respect to the current binary
directory. This matches the convention used in ExternalProject. Test
both full and relative paths in the VSGNUFortran test.
This patch adds a new module that allows for easy integration of MinGW
gfortran and the Visual Studio compiler. It is done in a function called
cmake_add_fortran_subdirectory. The patch also includes a test for this
feature.
Define a "check_language(<lang>)" macro to test whether <lang> can be
enabled. Cache the result in CMAKE_<lang>_COMPILER. Add a test case
covering expected results.
ed1b126 CMakeOnly.AllFindModules: require version for some modules
2dee929 CMakeOnly.AllFindModules: suppress two modules from testing
3c4b4ff CMakeOnly.AllFindModules: always check FindQt
9d72b25 CMakeOnly.AllFindModules: clean up the Qt3/Qt4 code
If CXX or Fortran is enabled before C then the values of
CMAKE_SHARED_MODULE_C_FLAGS
CMAKE_SHARED_MODULE_CREATE_C_FLAGS
may not be available. On platforms where MODULE library (plugin) creation
is the same as SHARED library creation initialize the MODULE creation
flags from the SHARED creation flags of the matching language instead of
assuming that C has been enabled first.
Teach the COnly and CxxOnly tests to build MODULE libraries. The latter
covers this specific case.
Causes compiler modules (currently only GNU) to set a
CMAKE_DEPFILE_FLAGS_${lang} variable, which communicates to
the generator the flags required to cause the compiler to create
dependency files.
98d2031 Fix BundleUtilities test failure with space in build path.
36d6641 Fix new BundleUtilities test failure on Mac 10.4.x
0d96dec GetPrerequisites: Add test for @rpath support.
880139a GetPrerequisites: Add support for @rpath on Mac OS X.
9a6b102 GetPrerequisites: Add support for @rpath on Mac OS X.
8d83043 AllFindModules test: also check Qt3 modules if Qt4 is not found
e797e7f AllFindModules test: keep complete output
ec631d5 add a test that loops through most Find* modules
This removes some useless checking. The results of these things are never
properly checked so they should not count as testcases. At the end they only
needlessly clutter the output.
6856b4d Merge topic 'link-shared-depend-cycle-issue-12647' into check_symbol_exists
8e1f376 add a test for Check{,CXX}SymbolExists
813eca6 CheckSymbolExists: force the compiler to keep the referenced symbol
0df1942 Detect SGI MIPSpro compiler version with its id
a5e892c Document compiler version macro formats used for detection
d7c6f41 Detect HP compiler version with its id
3dd9fa9 Detect SunPro compiler version with its id
c198730 Detect Watcom compiler version with its id
5899b98 Detect Clang compiler version with its id
b8cfa65 Detect PGI compiler version with its id
6dae666 Detect IBM XL compiler version with its id
4080d55 Detect Borland compiler version with its id
2cc205a Detect Intel compiler version with its id (#11937)
a6d83cc Detect MSVC compiler version with its id
a662855 Detect GNU compiler version with its id (#6251)
fa7141f Add framework to detect compiler version with its id (#12408)
Since commit 183b9509 (Follow all dependencies of shared library private
dependencies, 2011-12-14) we honor LINK_INTERFACE_LIBRARIES when
following dependent shared libraries. The link interface properties may
form a cycle if set incorrectly by a project. Furthermore, the property
LINK_DEPENDENT_LIBRARIES may form a cycle if set incorrectly by hand
(though CMake should never generate one). In either case, do not follow
the cycle forever when following the dependent shared library closure.
We only need to add dependency edges to the constraint graph once.
Add "LinkInterfaceLoop" test to cover this case.
Some tests only need to run CMake to configure and generate a build
tree, but not actually perform the build. Add a new "Tests/CMakeOnly"
directory dedicated for this purpose. Add a helper script to drive each
test by creating a fresh build tree and running CMake on it. Add macro
"add_CMakeOnly_test" to help create tests using the script.
53d31c2 complex: Remove unused option to test CMakeLib
c1789e6 complex: Remove test dependence on cmSystemTools
569cee1 complex: Move cmSystemTools::UpperCase test to CMakeLibTests
49d6dd6 complex: Simplify test for single-character exe name
76ac88b complex: Move GeneratedFileStream test to CMakeLibTests
137e597 complex: Remove dynamic loader tests
6337920 complex: Sync Tests/ComplexOneConfig with Tests/Complex
6a75821 complex: Remove ancient unused ComplexRelativePaths test
This test belongs in the CMakeLibTests test driver executable which
correctly links to CMakeLib. Fix incorrect library link order in the
Complex tests exposed by this change.
The two test sources must remain identical. Apply to ComplexOneConfig
the change that commit f578381e (Fix vs2010 project generation error
when HEADER_FILE_ONLY is set, 2010-12-20) made to Complex.
This adds a test that uses two project commands in the same CMakeLists.txt
file. It also adds a fix so that cmake --build will work in that case.
The fix sets the name of the last project command in the top level
CMakeLists.txt in the cache variable CMAKE_PROJECT_NAME. This variable
is used by cmake --build to find the project name.
Since commit 38aab379 (Set CMAKE_<lang>_COMPILER_ID for VS generators,
2011-09-02) the VS IDE generators set the C and C++ compiler id to MSVC
and the Fortran compiler id to Intel. This caused the Fortran test to
fail compatible compiler detection because the if() test
"${CMAKE_C_COMPILER_ID}" MATCHES "MSVC"
is evaluated as the "var MATCHES regex" signature which evaluates the
compiler id "MSVC" as a variable which is defined to 1 which does not
match "MSVC".
Combine tests for non-identical but compatible compiler vendors into a
single regex match whose left hand side will not be defined as a
variable.
In cmComputeLinkDepends we compute the transitive closure of private
shared library dependencies. When a shared library is added to this
closure we must follow all of its dependencies whether they are private
or public. Previously we only followed the private dependencies. Fix
the implementation to follow the public dependencies too. Also extend
the ExportImport test to cover this case.
automoc now defaults to strict mode, also with Qt4, i.e. it behaves as
the documentation says by default. I also inverted the switch
CMAKE_AUTOMOC_STRICT_MODE to CMAKE_AUTOMOC_RELAXED_MODE.
Docs and test adapted accordingly.
Alex
Teach CMakePlatformId.h to construct an "INFO:compiler_version[]" string
literal from macros COMPILER_VERSION_(MAJOR|MINOR|PATCH|TWEAK) to be
defined in CMake(C|CXX)CompilerId.(c|cpp) for each compiler. Provide
conversion macros DEC() and HEX() to decode decimal or hex digits from
integer values. Parse the version out of the compiler id binary along
with the other INFO values already present.
Store the result in variable CMAKE_<LANG>_COMPILER_VERSION in the format
"major[.minor[.patch[.tweak]]]". Save the value persistently in
CMake(C|CXX)Compiler.cmake in the build tree. Document the variable for
internal use since we do not set it everywhere yet.
Report the compiler version on the compiler id result line e.g.
The C compiler identification is GNU 4.5.2
Report CMAKE_(C|CXX)_COMPILER_(ID|VERSION) in SystemInformation test.
ae62a1c Test CMAKE_GNUtoMS option in ExportImport on MinGW and MSys
afb00fe Add CMAKE_GNUtoMS option to convert GNU .dll.a to MS .lib
61e8629 Factor makefile generator link rule lookup into helper function
a603250 Load platform files that need to know the ABI when possible
ecd8414 Fortran: Detect pointer size in gfortran on MinGW
This test will fail to get a proper version number if running on a (e.g.
German) localized system because the regular expression used to match the
Subversion version output does not match. Instead of duplicating code just
remove the local test altogether and use the version that FindSubversion.cmake
already detects.
Since the export() command needs to know the final location of a target
in the build tree we cannot allow properties affecting the location or
name of a target file to be set after the target is passed to export().
Fix a violation of this rule in the SimpleInstall test.
ac2e45d Provide std::ios_base typedef on GCC < 3
28c46ca cmNewLineStyle: Use cmStandardIncludes.h
75e83e9 cmNewLineStyle: Remove trailing comma in enum
be6502c bootstrap: Include cmNewLineStyle in build
a087490 Add NEWLINE_STYLE option to configure_file (#3957)
537020f Tests: Nudge MFC test to pass on VS 6 dashboards (#11213)
51f442e VS11: Update InstallRequiredSystemLibraries.cmake for VS11 (#11213)
d85ab7a Tests: Add environment logging to the MFC test (#11213)
011694c VS10: Use expected values for UseOfMfc (#11213)
a2e6d24 Tests: Fix MFC test to work with VS 10 and later (#11213)
c71f7ab Tests: Avoid MFC test automatically for Watcom WMake builds (#11213)
a42e3f2 Tests: Fix MFC test for old vs6 dashboards (#11213)
b297da6 Tests: Fix MFC test w/ Make-based generators (#11213)
54595e6 Tests: Avoid MFC test automatically for VCExpress builds (#11213)
36b0c43 Tests: Add the MFC test (#11213)
InstallRequiredSystemLibraries does not install any dlls when
used with VS 6 dashboards. Modify the ValidateBuild script to
expect only 1 file when building with VS 6.
Using "-DCMAKE_INSTALL_PREFIX=<INSTALL_DIR>" does not work when
<INSTALL_DIR> evaluates to a long enough string. However, using
"-DCMAKE_INSTALL_PREFIX:PATH=<INSTALL_DIR>" does work, even with
the longer strings. So: make sure to include the ":PATH" when using
this construct with ExternalProject calls so that they may install
to the proper location on VS 6 builds. All existing calls that match
"CMAKE_INSTALL_PREFIX.*INSTALL_DIR" include the ":PATH" after this
commit.
By the way: https://twitter.com/DLRdave/status/134339505397309440
The mfc app in the test was generated by the VS 7.1 wizard,
and due to changes in VS since then, the values used for WINVER
and _WIN32_WINNT caused compile errors when built with VS 10
or later. Change them to values appropriate for targeting
Windows XP or later when building with VS 10 or later.
See http://msdn.microsoft.com/en-us/library/6sehtctf.aspx
for more info.
The MFC test's mfc1 directory was a "VS-MFC-wizard-generated"
starter MFC app, using VS 7.1 as the generator. There's one define
used in the generated rc file that was not available back in the
VS6 days... Put a conditional define in here based on _MSC_VER
to enable the test app to build on VS6 dashboards.
Build a simple, do-nothing VS 7.1 MFC wizard generated app
with CMake.
Build it two different ways via ExternalProject, one with
CMAKE_MFC_FLAG set to 1 for linking to MFC statically, and
one with CMAKE_MFC_FLAG set to 2 for linking to the shared
MFC dlls.
Validate that the install tree of the static build has only
one *.exe file in it and nothing else. Also validate that the
install tree of the shared library build has multiple files in
it (no less than 3) and that they are only of the expected types
*.exe, *.dll and *.manifest.
This commit does not address the issue reported in #11213,
it merely adds a test that may be used to show that the
bug report is valid. After this commit, the MFC test should
fail on any dashboard machines that have MSVC defined, but
cannot build an MFC app. We can then analyze that failure
data as input to solving the issue.
Provide the ability to configure CTest with settings different from the ones
available in the source tree by checking first if CTestConfig.cmake
exists in the build tree.
The motivation is to allow build system checking out external project to
test and/or package them and submit the associated results to a different
dashboard than the one specified (or not) in the source of the external
project.
For example, the build system of Slicer can checkout, build, test
and package what I will call "extensions". These extensions can be developed
by third parties who can test and submit to their own dashboard / project.
When checked out by Slicer build system, the default dashboard can now be
overwritten by adding a custom CTestConfig.cmake to the build directory.
And if not overwritten, it would avoid to create CTestConfig.cmake within
the source checkout of the extension.
Older svn versions do not have the --depth option for "svn add".
Fortunately we do not need it for versions that old. Look for the
option and use it only when available.
The test adds a subdirectory with
svn add subdir
svn add ... subdir/foo.txt subdir/bar.txt
Subversion 1.7 fails on the second command with
svn: warning: W150002: '.../subdir/foo.txt' is already under version control
svn: warning: W150002: '.../subdir/bar.txt' is already under version control
svn: E200009: Could not add all targets because some targets don't exist
because it considers adding an already-versioned file to be an error.
Avoid the problem by using
svn add --depth=empty subdir
to add the subdirectory without the files it contains.
This fixes#12533.
Before automoc did not check the header if the source file contained a
statement, now it does.
Additionally, moc is now only run on explicitely listed headers which
contain a Q_OBJECT macro.
Alex
BSD make doesn't use -v for printing its name and version, and so
complains on stderr that this is a bad command line option, used
in Tests/FindPackageModeMakefileTest/CMakeLists.txt .
Silence stderr to make that ugly output go away.
Patch by David Coppy.
Alex
Teach the CheckCompilerRelatedVariables test to verify MSVC11. Update
the special cases already in the Preprocess and VSExternalInclude tests
for VS 10 to work for VS 11 too.
67fcc83 Simplify IntelVSImplicitPath detection project
a7ce26d Move IntelVSImplicitPath project to better location
539a822 Enable Fortran tests for IDE builds.
555f589 For VS Intel Fortran IDE builds, add a check to find the Fortran library PATH.
71402eb FortranCInterface: Compile separate Fortran lib in VerifyC[XX]
Presently, this test is only run manually because not all machines
have an iOS SDK, complications associated with certificates and code
signing, having a device attached, ...
If you're setup to do iOS dev work, you can easily run this test
manually on your Mac using the Xcode generator and run the result
in the simulator or on your attached device.
90efed6 Xcode: Honor Fortran_FORMAT target and source file property
5c0c635 Fortran: Add support for free- and fixed-form flags
47a0c75 VS: Map Fortran free- and fixed-format flags to IDE options
d6e2a06 VS: Map per-source Fortran flags to IDE options
One of the dashmacmini5 runs of this test results in an
"Illegal exception" detected instead of a segfault. For
the purposes of this test, we're going to say that either
is a "crash."
6a6393c Don't use a variable name that might be used in other files.
5ca8c56 Fix up verbatim code sections of the dox.
75596e6 Don't start a line with a dash(-)
826374a Remove blank line at the start of the file.
8b9b8e1 Add documentation about the prefix and no_deprecated options.
51bc63a Fix the feature of using a specific prefix for macros.
3449f6b Add quotes in case cmake is installed in a prefix with a space.
36d28f2 Fix Compiler id variable name.
99b2aab Disable the tests for Watcom.
7ac0ab1 Quote paths in case there is a space in one of them.
89108b9 Look for errors reported by PGI too.
e0cc024 Add missing NO_EXPORT macro variant.
1b031d1 More consistency in the macro options.
03d60c7 Try to make the macros do almost nothing for Watcom.
6adeda9 Possibly fix configuration test on AIX.
e253348 Possibly fix test on HPUX.
32eff0c Test for too-old-intel compilers.
42154ec Fix up the regex command for Intel.
a147a06 Add some settings for non-truncation of test output.
bf73e75 Hopefully add version extraction for Intel.
aa4f0b6 Fix the version extraction regex for clang.
a493d1a Test the correct cxx variable.
b6ee2ee Comment the test assertion for now
a9a8b9e Exclude win32 from hidden visibility checks.
afae7a9 Start testing expected values for compiler flags.
1ae3365 Exclude PGI from exports and deprecated.
f426496 Exclude cygwin from the hidden visibility feature.
f84c7db Don't enable deprecated on old GCC
9672b33 Don't enable deprecated on HP.
10d8c44 Disable testing of deprecated macros.
97392a7d Fixup forgotten part of aed84517c92aeab4f Borland can't do deprecated.
c41c68b Try to error on deprecated on Intel and SunCC.
aed8451 Test for deprecated attribute before declspec.
c448b09 Perform the -Werror test only once.
fb88c6e Add some messaging output to make remaining issues findable.
01e9e98 Test -Werror instead of enabling it per compiler.
9aab2aa Expect the tests to pass if hidden visibilty is not enabled.
856bdb3 Don't change the expected build result based on the platform.
df4615e Add the COMPILER_HAS_DEPRECATED only if it has a declspec variant
78a6e1c Exclude the XL compiler from the hidden-visibility test.
e1f7ee3 Test for compiler features, instead of for specific platforms.
9554e10 Split the deprecated available check from setting macro values.
1590d5f Don't export methods on already exported classes.
750b67c Don't use hidden visibility on non-mingw windows either.
1f3be45 Make sure the hidden visibility variables never get set on MINGW.
399f415 Only set the deprecated attribute if hidden visibilty is enabled.
1c6b41b Remember to surround the other deprecated test in the Borland check.
3f7e036 Export deprecated free methods too.
7fa5592 Add some debug output to narrow down deprecation test issues
7924c1d Another attempt at fixing Borland.
50460ea Fix off-by-not in test for Borland.
b443459 Use the correct project name compiletest not compilefail
fc3772e Another attempt to fix the tests on Borland.
bab4a22 Disable all export macros on Borland.
cff9493 Only set the COMPILER_HAS_HIDDEN_VISIBILITY if GCC >= 4.2
af443b8 Set the CMAKE_RUNTIME_OUTPUT_DIRECTORY for windows builds.
61726f8 Only run the failure tests with gcc >= 4.2
002ddf2 Fix typo and tests failing as a result.
4443037 Fix tests with clang.
ffaa127 Test expected no-op instead of aborting the build.
6aca0e2 Short-circuit the tests on unsupported compilers.
d123bce Add some debug output.
3574b75 Simplify the compiler feature check
c7a937b Simplify. We already know we have hidden visibility at this point.
3b188c8 Test for features, not specific compilers.
4718233 Remove the fatal_warnings option which is no longer used.
b19911e Add missing licence header.
706ed2b Add a newline at the end of the file.
8963716 Add a newline at the end of the file.
def0a54 Handle the case where the user changes the DEFINE_SYMBOL property.
3088070 Add the GenerateExportMacro with unit tests.
Define a "Fortran_FORMAT" target and source file property. Initialize
the target property from a "CMAKE_Fortran_FORMAT" variable. Interpret
values "FIXED" and "FREE" to indicate the source file format. Append
corresponding flags to the compiler command line.
59238dc Fix --find-package mode on Cygwin, where enable_language(RC) is called
98472e4 Require the current cmake version in --find-package mode
a6ccf3c Use $(CXXFLAGS) and $(LDFLAGS) in the --find-package test Makefile
4386918 Fix line length
7d69310 Only enable the test when using GNU make
3011149 Make the test harder by always having a space in the include dirs
ab57ff6 Make the --find-package test harder
626fc71 Much improved test, should now be executed on all UNIXes
ec6982d Disable any STATUS output in --find-package mode
e552ae7 Dont check for -isysroot and -mmacosx-version on OSX in --find-package mode
e589589 Rename helper macros print_compile_flags() to set_compile_flags_var()
aecfc1f Fix test on OpenBSD with BSD make
6bb4ca3 The makefile for the test was kindof wrong
fd15b5e Only run the test if we are using a makefile generator under UNIX
9fc87c6 Add a test for the new --find-package mode
d3ae0ff Improve documentation for --find-package mode
bf07375 Add a cmake.m4 for using cmake in autoconf projects instead of pkgconfig
b0e3578 Use the file-utility to test for 64bit if there is no /usr/lib64
53edfb2 Better support for lib64 and Debian multiarch
b8fdaa1 Fix copyright notice in new CMakeFindPackageMode.cmake
7690edf Replace cmake::GetScriptMode() with GetWorkingMode()
e4f603b Implement find-package mode of cmake
a91d662 Add find-package mode, which does nothing yet
b976e70 Make clLocalGenerator::GetTargetFlags() public
920a046 QtAutomoc: Eliminate compiler warning
b00463f QtAutomoc test: Pass QT_QMAKE_EXECUTABLE
e78ce44 Fix automoc with VS builds: apply patch from Bill
71165e9 Silence warning in automoc: use long instead of int
1879bcc Fix build: use std::ios::out|ios::trunc instead of std::ios_base::out
678e124 Only enable the automoc test after checking that Qt4 works
71c29d1 Fix bootstrap test with automoc
afb3edc Fix warnings
add30e9 Fix build: non-void function must return a value
7e6d845 Automoc.cmake is not needed anymore
2963d0b Fix logic which decides when to execute automoc test
77a5c6e Add documentation for AUTOMOC, add initialization via CMAKE_AUTOMOC
bf8ef77 Add a test for automoc
d045fd4 Nicer progress message for the automoc target
50cd6ce Move automoc processing from add_executable/library to cmGlobalGenerator
cbaac2a Remove trailing whitespace
c27607b Refactor SetupAutomocTarget() so it can be run after creating the target
24d9b7d Remove trailing whitespace
58b7fe6 Use cout instead of printf()
72caf4d Add the generated automoc.cpp file to the cleaned files
ddb517d Color output when running moc
9303295 Initialize verbose based onb the env.var.
ace1215 Move code for parsing a cpp-file from the big loop to separate function
735a5bb Fix line lengths
83b730c Add AUTOMOC to the add_library() command
126c6ea Add the cmake module required currently for automoc
de91feb Remove the need to check for .h/.cxx during buildtime
d65689a Add actual automoc code from automoc
d1c0a5f Start implementing skeleton for automoc in cmake
a65011b Start work on automoc: add empty cmQtAutomoc class
On some systems which contribute nightly builds there were strange
errors which seemed to hint that the installed Qt4 is not usable/
not usable with this compiler. So first check whether it works,
and only if this was successful, enable the test.
Alex
The makefile used in the test uses $(shell ...), which is
AFAIK a GNU extension, and will probably not work e.g. with OpenBSD make.
According to the FreeBSD make manpage their make has a != assignment,
which seems to do something similar, but I don't have such a system
around for testing.
Also, the point of this test is not to write a portable makefile,
but to check whether cmake --find-package prints a correct string.
Alex
The commit message for the previous commit was wrong, it should
have been: fix the test by using $(shell ...) syntax instead
of backticks in the Makefile.
With backticks I couldn't get the quoting right.
Printing -I"/some/path with space" did not work, the compiler
complained that there is not file "with". Also backslashes in
different numbers did not make it work.
Alex
c9761de Improve documentation for WriteBasicConfigVersionFile.cmake
208bb90 Set UNSUITABLE instead of not COMPATIBLE
bb03c2d Really fix copyright notice
d50a61a Fix copyright notice
4ba09bc Add some tests for write_basic_config_version_file()
02b1e4b Add example to documentation
d216a67 Provide macro write_basic_config_version_file()
Instead of relying on that some development package is installed on the
system, now a tiny library is built, which is the searched and used
during the test.
Alex
BSD make doesn't seem to support -C, so do not use it,
According to the documentation the working directory is set
to CMAKE_CURRENT_BINARY_DIR anyway, so it should work just the same.
Alex
For custom commands in VS2010 Fortran projects the INTDIR variable
is different than in the rest of the solution because Intel
fortran still uses the old VS project files even in VS2010. So,
we replace $(Configuration) directly in the project files. I have also
added a FortranOnly test that tests this feature and is run on any
generator that has Fortran abilities.
But only if it exists at the default location:
C:/MinGW/bin/libgmp-10.dll
This is so that the pop-up dialog about not being able to load
that dll does not hang the test when there's nobody watching.
Generated Update.xml file is larger than the previously
hard-coded limit of 4096. Introduce variable max_update_xml_size
and bump it up to 16k for reliable test runs.
Thanks to Pau Garcia i Quiles for the inspiration for the patch.
I've tweaked it a bit compared to what's in the bug tracker: this
commit does not allow empty global variable names.
I also added usage of the new feature to an existing test. Although
it has no effect on the resulting Visual Studio projects, you can
verify that the VSResource test produces a non-empty globals section
in the generated .vcproj(x) files.
1a53fb7 Use correct default multiple architecture values in test
5f7acc8 Base architecture choice logic on Xcode version
c050c59 Fix BuildDepends test to work with Xcode 4
923b030 Fix Architecture test to work with Xcode 4
4a50b5f Add a basic test for CMAKE_DISABLE_FIND_PACKAGE_<package>
a66df08 Add documentation for the CMAKE_DISABLE_FIND_PACKAGE_<Name> switch
6e1d3ed Add a switch to disable a find_package() call completely
1417a55 Java: Fix documentation format and indentation
0b7627d Java: Use set_property/get_property for target variables.
b01a505 Java: Create correct jar archive dependencies.
f99c312 Java: Added some dependency magic to avoid recompilations.
f3233ba Java: Create java_class_filelist only if it does't exist.
a22ed3d Tests: Check for the new Java exeutable variables.
c177c8e Tests: Java tests should test UseJava.cmake
5c2106c Modules: Added CMake Java support.
a4b6275 FindJava: Find missing java development executables.
ppc tools are no longer available in the Xcode 4 installation.
Eliminate the use of the hard-coded 'ppc' in the test when
running on Snow Leopard or later.
ppc tools are no longer available in the Xcode 4 installation.
Eliminate the use of the hard-coded 'ppc' in the test when
running on Snow Leopard or later.
set_property() has APPEND, which creates a list. E.g. when
appending to COMPILE_FLAGS a string is needed, not a list.
With the APPEND_STRING option the value is append as string,
not as list.
Alex
This patch adds two macros cmake_push_check_state() and
cmake_pop_check_state(), which can be used to save and restore
the contents of the CMAKE_REQUIRED_xxx variables.
Alex
1ed19bc multiarch: Set CMAKE_LIBRARY_ARCHITECTURE_REGEX for Linux|Hurd|kFreeBSD
52a6ed2 Test find_package multiarch support (#12037)
b41ad3b Teach find_(library|package) about Linux multiarch (#12037)
When add_test(NAME) is called without the CONFIGURATIONS argument then
the test is intended to run in any configuration. In multi-config
generators like the VS IDE and Xcode tests created by add_test(NAME) can
only be run when testing a known configuration (otherwise there is no
way to generate the test command line). If no test command line is
known for a particular configuration, or if no configuration is given to
ctest, report the test as not run instead of silently skipping it.
Also fix CMake's own TestsWorkingDirectory test invocation to correct a
previously silent failure exposed by this change.
51e16c0 BundleUtilities: Avoid test on Watcom dashboards (#12034)
41f962a Revert "BundleUtilities: Run test on Windows if either MSVC or dumpbin was found."
e17135e BundleUtilities: Add rpath to loadable modules in test.
8064044 BundleUtilities: Print reason for not loading module.so
f3de459 BundleUtilities: Run test on Windows if either MSVC or dumpbin was found.
900bf98 BundleUtilities: Disable running test on Windows unless using MSVC.
fa4dc08 BundleUtilities: Fix issues with custom target DEPENDS in test (#12034)
e40b79e BundleUtilities: Fix test when using xcode (#12034)
b68d3dc BundleUtilities: Fix regex to extract dependents from ldd (#12034)
7ac7b43 BundleUtilities: Work w/ non .app exes on Mac (#12034)
27aa446 One more try. Use full path by default, and relative on broken compilers.
2dfc121 Use bin tree for inclues to avoid -I with spaces in the path.
6d29b4b Append and do not clobber CMAKE_CXX_FLAGS in the test.
7815e90 Fix for bug#10798. VS10 did not append -I flags with COMPILE_FLAGS prop.
Also add a test of BundleUtilities including an exe,
some shared libs, a plugin, and a framework-style lib.
This test presently runs (and this functionality works)
on Linux, Mac and Windows.
For now, the framework-style lib is built as a plain old
shared lib because there is another yet-unresolved issue
with local frameworks without rpaths on the Mac.
cdc2b41 Fix CompileCommandOutput test build on Windows
7039d1f Fix CompileCommandOutput test for Make tools not supporting spaces
4268e3d run_compile_commands: Cast istream::get() result to char
c45c60b run_compile_commands: Avoid extra stl vector conversion
7c5be51 run_compile_commands: Avoid shadow in std::map<>::at workaround
169bb05 Provide std::map<>::at for use in run_compile_commands
4e2185c Make std::map usage more portable in language=>flags/defines maps
a7e7a04 Fix run_compile_commands build on Apple GCC 3.3
c9174c0 Fix signed/unsigned comparison in EscapeJSON
8346a28 Only offer the compile command output feature on unix systems
0e6b05f Adds a test for the compile command line output.
5674844 make compile command output optional
fe07b05 implement cxx command output
65c0c24 cache flags and defines
3f064ef refactor flags and defines
8bd3e51 Absoft: Enable FortranCInterface check in Fortran test
d7b376b Absoft: Detect implicit link libraries on Linux and Mac
ac5b999 Add Absoft Fortran compiler id and basic flags
Use the "-X -v" flag to the Absoft front-end to pass "-v" to the gcc it
invokes under the hood. Teach CMakeParseImplicitLinkInfo to exclude
linker version lines from consideration as link lines. Fix parsing of
Sun's linker search path option "-Y..." to avoid conflict with the Mac
linker option "-Y<num>".
The Sun compiler does not provide the proper vector constructor to
initialize it from an iterator pair of a non-matching type. Extend the
ParseUnixCommandLine API to provide a vector of the proper type so no
conversion is needed.
Many compilers we support do not provide the at() member of std::map.
Use the workaround added by commit a7e7a04a (Fix run_compile_commands
build on Apple GCC 3.3, 2011-05-16) for all compilers.
08b9397 find_package: Fix system package registry test path conversion
93021ad find_package: Test system package registry when possible
b95f3ca find_package: Check both 32-bit and 64-bit registry views
a0d76c1 find_package: Search a "system package registry"
549458f find_package: Document user package registry locations
c9563db find_package: Cleanup user package registry less aggressively
4df1197 find_package: Rename implementation of user package registry
Do not use file(TO_NATIVE_PATH) to compute the value to store in the
registry. It is meant for constructing values to be put in shells.
Since find_package() can use the value with CMake-normalized slashes do
not bother with any conversion.
Teach the FindPackagTest to try creating the appropriate HKLM system
package registry value. If it works then add a test to verify that
find_package() reads it as expected. Then delete the value to cleanup.
Which adds --non-interactive and --trust-server-cert to the svn
checkout and update command lines. This allows ExternalProject
clients to pull from an https:// based svn server even though
the server may not have a valid or trusted certificate.
Caveat emptor: I would NOT recommend using this except as a
short-term work-around. Rather, the server should have a valid,
trusted certificate, or the client should be using "http" instead
of "https".
Some find modules call find_package recursively to locate a package
configuration file for the package instead of searching for individual
pieces. Commit 79e9b755 (Help recursive find_package calls in modules,
2008-10-03) taught find_package to forward the version number and EXACT
arguments through the recursive call automatically. Do the same for the
component list.
3e32db7 cmCTestUploadCommand::CheckArgumentKeyword should return false if not FILES
6b6f309 Add the FILES keyword to ctest_upload command
28cdd0a Don't tar/gz ctest_upload() files
fbe4356 Change 'Files' tag to 'Upload' in Upload.xml
350546d Implement ctest_upload command
For VS2010 if a precompiled .obj file was the output of a custom commad,
it was used as part of the build. If it was not, then VS did not
use it as part of the build. This commit updates the test to check
for this issue, and fixes the problem. This fixes bugs #0011891 and
The AMD64 ABI document http://www.x86-64.org/documentation/abi.pdf
does specify that 64bits binary libraries should end up in <prefix>/lib64
and 32bits ones in <prefix>/lib. All but debian based distros do so,
and some like OpenSUSE even enforce the rule when packaging with RPM
and refuse to build the RPM if this is not the case.
After some discussion (see the bug notes) we cannot do that behind
the scene and the current fix supposes that the user shall use
the CMAKE_INSTALL_LIBDIR variables content in its INSTALL rules if
he wants to put the lib in the right place. CMAKE_INSTALL_LIBDIR
shall have the appropriate value depending on the Linux distribution
found and 32/64bitness of the host.
The cross-compiling case (even 32bits compile on a 64bits host)
is not handled.
All commands accepting file paths should normalize the slashes so that
the string-represented names can be compared reliably. The commands
add_library and add_executable have done this for years. We taught
add_custom_command to normalize its OUTPUT names in commit a75a0a14
(Normalize add_custom_command OUTPUT names, 2010-12-15). We handled a
special case of the DEPENDS option in commit 7befc007 (Handle trailing
slashes on add_custom_command DEPENDS, 2011-01-26).
Teach both add_custom_command and add_custom_target to normalize slashes
of DEPENDS files up front. This approach subsumes the above-mentioned
special case so remove the one line added for it but keep its test.
Extend the CustomCommand test to check that slash count mismatches
between custom command OUTPUT and DEPENDS can still be linked correctly.
Also, comment out all "debugging" calls to message() that helped
us interpret the output on other platforms when running on the
dashboard clients.
Using ERROR_QUIET avoids unnecessary stderr output while calling
external tools to determine the processor count. If there's an
error parsing the output, we set the count to 0 anyhow.
Also, the test will fail on a CMake dashboard run if the count
comes back equal to 0.
Now that the code is "done"-ish, remove the debugging output.
Expect no output on stdout or stderr when calling the
ProcessorCount function from now on.
The parent commit 46c0a583 (Enable Java test more carefully on Apple,
2011-03-18) failed to restore the exclusion of Xcode when enabling the
Java test that was originally removed by commit c8f39193 (Avoid problem
reading jni.h on Macs, 2010-10-25). The Xcode generator does not work
with the current Java support at all.
The CTEST_RUN_Java option added by commit c8f39193 (Avoid problem
reading jni.h on Macs, 2010-10-25) was a quick hack to disable the Java
test on Mac machines after an update from Apple created a broken jni.h
symlink. Remove the option and instead test whether jni.h exists as a
readable file before reading it. This restores the original Java test
enabling logic but makes it robust to the broken symlink.
More dev work remains to be done here. Removing test failure
condition until that dev work is complete, so it does not
mask or hide other, more important failures, on the dashboard.
Credit goes to David Cole ( http://www.kitware.com/blog/home/post/63 ).
Also add a script-based test of the new module.
Signed-off-by: Michael Wild <themiwi@users.sourceforge.net>
ade04de Remove debbuging typo
a201028 CPack try to please SUSE 64 bits and install lib in lib64 and not lib.
7ebbcf1 CPackRPM non matching ENDIF
0e07b42 CPackRPM even more trace in debug mode or in case of failure
564b731 CPackRPM add more trace output in order to help failing diagnostics
b3ce420 Do not bother enabling C++ in Assembler test
80f6a34 Teach Assembler test to generate main.s at build time
1dafa74 Fix Assembler test to parse C flags string before using
4139a73 -only enable the asm test for the Intel compiler if we are under UNIX
1f6c6b1 -use CMAKE_C_FLAGS when generating the assembler file
d0f71e2 Add ASM platform information for HP compiler on HP
bd580be Merge branch 'hp-compiler-info' into ReworkedAsmSupport
a0bab7a Add ASM platform information for XL compiler on AIX
c03b610 Merge branch 'aix-xl-platform-info' into ReworkedAsmSupport
c623008 Initialize ASM rpath flags for executables with those for shared libs
17c658f Add support for the Intel compiler used for ASM under Windows
4258b24 Add more regex for gcc, always print the ASM compiler ID
9071b8b Add temporary debug output for compiler ID detection for ASM
48f7199 It's ELSEIF(), not ELSIF()
d103c75 Fix bad comparison in the detect assembler-code
20fe0be Only try assembler support for Makefile-based generators
8614470 Use a regexp instead a lot of ORs for checking the compiler ID
cf88092 The Assembler test now tests ASM for GNU, Intel, HP, XL and SunPro
66614a8 Add assemble- and preprocess commands for HP
78f7c59 Fix the default CMAKE_ASM_COMPILE_OBJECT, make XL-ASM use it
7456461 Change the default rules so they fit better to the new ASM handling
5542d58 Set the HP asm file suffix
f745220 Add support for ASm for the HP compiler.
00735d4 Add suport for ASM for the IBM XL compiler
d3e9e8a Add support for ASM for the SunPro compiler
64e66eb Actually use CMAKE_ASM_COMPILER for asm, instead of CMAKE_C_COMPILER
38f92bf Add ASM support for the Intel compiler
4b40d42 Rework the way assembler is handled, use the C/CXX compiler by default
Use a custom command to generate the assembly source file at build time.
Also set CMAKE_VERBOSE_MAKEFILE so the test output contains all the
build rules. These two changes will show the entire .c -> .s -> .o and
final link commands in the test output.
Commit 1f6c6b1c (use CMAKE_C_FLAGS when generating the assembler file,
2011-03-03) added use of CMAKE_C_FLAGS to the assembler generation step.
However, this variable is meant for direct substitution into a shell
command line so we need to parse it to separate the arguments first.
Add "LinkStatic" test that links a static executable against "libm.a".
Pass both "/usr/lib/libm.a" and "-lm" to target_link_libraries to
trigger the link type logic for both cases. If CMake incorrectly
switches the link type to shared for "-lm" then the link will fail.
Commit 6a61a8a5 (Honor module .def files with MinGW tools, 2011-02-21)
enabled use of .def files with GNU tools on Windows. Previously the
Fortran tests's world.def file was used only for the Intel Fortran
Compiler on Windows and contained the symbol name mangled for that
compiler. Instead choose a .def file that names the symbol with proper
mangling for the compiler in use.
1a8eed1 Merge branch 'add-STRING-subcommand-FIND-issue-11795' into fix-2828-more-info-in-script-mode
006124b Avoid direct use of std::stringstream
8a8da36 Merge branch 'fix-2828-more-info-in-script-mode' into add-STRING-subcommand-FIND-issue-11795
1462561 Add a string(FIND) sub-command (#11795)
Since commit 024d05ad (Fix use of module .def files for MS tools,
2009-09-29) module .def files work for any platform that sets
CMAKE_LINK_DEF_FILE_FLAG correctly. Set it in the Windows-GNU platform
information file to enable support with MinGW tools. Also enable the
test added by commit 0db2c850 (Test use of module .def files for MS
tools, 2009-09-29) for MinGW and MSYS generators.
1: The CTestTestFailedSubmits tests do not need to run the
CTEST_MEMCHECK command. It is covered by the CTestTest2
test. If more coverage *is* required, choose a test that
runs by itself once to add it to... This one gets used
several times in a loop to test submission failure via
the various submission protocols. With memchecking on,
each test here takes 1000 seconds or more on a "fast"
build...
2: Other ctest tests do not need any of the CTEST_MEMORYCHECK_*
variables defined. They don't even call CTEST_MEMCHECK, or
-D NightlyMemCheck, or anything. So: remove the unnecessary
set calls.
3: CTestTest3 has gone intentionally unused for months because
it did not add any coverage and caused no ends of sporadic
randomish failures when network connectivity was spotty.
Remove its directory. Never add it again.
008d116 VSResource: Avoid windres /D with quoted spaces (#11695)
8f9919d Avoid space in rc /D values for VS6 and Cygwin (#11695)
78fe97f Fix line too long KWStyle issue (#11695)
6627560 VS10: Escape double quote chars in defines for rc files (#11695)
dd2f814 Merge branch 'dev/add_test-working-directory' into dev/strict-mode
949d32c Unwatch manual variables upon removal in cmake-gui
3939032 Unwatch manual variables upon removal in ccmake
8354413 Add method to unwatch a manual variable
8ed3c85 Give a better message for unused variables
729db48 Fix ArgumentExpansion test expected results
89c2544 Checking for a definition is a usage
5625dee Don't output to stderr in the GUI
ad25a96 Merge branch 'ImprovedDotSupport2' into dev/strict-mode
c128abe Merge branch 'AddCMAKE_CURRENT_LIST_DIR' into dev/strict-mode
9bcaff0 Merge branch 'cmake-guiRememberAdvancedCheckbox' into dev/strict-mode
544d0c3 Fix expected output for WarnUninitialized test
4e3bea4 Update expected messages to new format
8e8c9e4 Don't check at destruction for usage
668e005 Use cmake::IssueMessage for warnings
88cd4c1 Use 'CMake Warning' versus 'warning' for CDash
3c3b98d Initialize the class before setting warn flags
cf8b15a Ignore files under the CMakeFiles directory
fd50f06 Don't check for unused vars at configure time
447a04c Don't warn during configure when doing everything
b97ee21 Check for unused variables at the end of generate
c18c977 When checking for variables, specify a reason
3f1121f Use a long int since Line is a long as well
2507f93 Change the failure case string to 'Unexpected'
fe390a2 Add 'ArgumentExpansion' test
8dbb209 Wrong boolean value for CLI warnings
d4ee998 Hard-code the --no-warn-unused-cli flag
a267b99 Fix line lengths
82ed104 Flag that the directories have been set
5aa535b Add argument to arg parsing to not set directories
367e5c3 Revert "Revert "When calling CMake, set the args and the cache""
ab5d4e4 Revert "When calling CMake, set the args and the cache"
9b90040 When calling CMake, set the args and the cache
fe56002 Fix long lines for KWStyle
5d30cfc Set a watch on variables added through the gui
33c63b1 Add a method to put a watch for variables
535253f Initialize the warning variables earlier
cbb286c Fix the path detection to work for top-level
62be1f7 Initialize the usage stack earlier
c6e7fab Factor out the checks for unused variables
5e41ba8 When using the API, check for Add vs. Remove
dee1976 Fix typo in VariableUnusedViaUnset test
f231ce5 Remove old false positive avoidance code
a117e02 Revert "Add test for unused warnings at the end of scope"
2c82f2b Exempt CMAKE(CURRENT|PARENT)_LIST_FILE from usage
6d7d449 Ignore CLI warnings for ABI determination
7740a73 Only return local keys that are defined
bef3aee Use the API so that warnings can be tracked
05cb0f4 Check for unused variables in the dtor
91c4c99 Add test for unused warnings at the end of scope
ca90f67 Fix detection of unused variables when setting
f7438ca Add test for unused detection via setting it
995cfb0 Don't warn if the variable wasn't defined
aefc91d Add test for usage checks via unset
a8e97f8 Remove VarRemoved code since it's been superceded
59463ef Rework CheckVariableForUnused usage
f117423 Fix line lengths to be no more than 78
e49a935 Improve unused warning logic
e01e40c Mark ARGC, ARGV*, and ARGN as used
a17aff7 Ignore CMAKE_MATCH_* variables for usage
02a114d Add method to allow variables to be marked as used
a0b0d23 CMAKE_DO_TRY_COMPILE is no longer used
ae3eff3 Fix the path used for ignoring system warnings
056b441 Fix missing case for usage of a variable
980e048 Factor out checks for unused variables
83acb0a Remove now unused variables
3801463 Use built-ins for readability and maintainability
8b52015 Push the initialize and unused states when copying
439877f Be consistent with single and double quotes
4cf1706 Add documentation for check-system-vars
b74777f Fix the spelling of the flag for warn-unused-vars
b948120 Change logic of flag to turn off cli unused checks
f047a17 Add test for uninitialized variables
75bda38 Add tests for unused command line variables
300fc15 Fix detection of system files
d784e6a Run the unused variables check on the final pass
9efc057 VariableWatch is not available when bootstrapping
2e78224 Add a missing comma to the warning message
7499700 Add a flag to warn about system files
fff9f6d Rename flags again and use variablewatch for cli
786e269 Add warn-unused to the Qt interface
636e6c4 Default to marking things as used
4ff0340 Rename find-unused to warn-unused
d7999e9 Rename strict-mode to warn-uninitialized
e141bc9 Detect unused variables
d3e8eb5 Add flags to detect unused variables
f332e14 Complete strict-mode checks for uninitialized vars
52f9637 Add method to get the local scope variables
f794d58 Make --strict-mode option, and integrate with cmake-gui
48b5b85 Add a warning when variables are used uninitialized.
cd626ea For macros make sure the FilePath points to a valid pointer in the args.
d94f9c6 Only set the property if the property was given
b6c302b Default the working dir to the current binary dir
0594287 Add more tests for WorkingDirectory for tests
To get rc defines to work in the VS10 IDE requires \" when
constructing PreprocessorDefinitions strings. This is different
than defines for cl.
Also, per-file rc defines were not being generated. Fix that, too.
aeb6cd8 Merge branch 'honor-explicit-zero-timeout' into resolve/mingw-cross-compile-resources/honor-explicit-zero-timeout
20d87c8 Teach Simple_Mingw_Linux2Win test to use windres
This test was broken by commit b2f308c8 (Add support for windows
resources with mingw/msys, 2010-12-22) because the test does not set a
resource compiler which is now required on MinGW for the 'RC' language.
Use windres as the resource compiler for the test.
Teach the ArgumentExpansion test to expect flattened lists as has always
been the case in the CMake language. Now that the test should pass
enable the failure regex even when CMAKE_STRICT is not on. Replace the
reference to the old ArgumentExpansion test behavior in the workaround
comment in cmMakefile::TryCompile with a full inline explanation.
Some older dashboard machines do not have Rez in /usr/bin
like us modern folk. But most of them will have it in
/Developer/Tools... So make sure we look there.
ce28737 Remove usage of CMAKE_CURRENT_LIST_DIR now that we have CMP0017
7db8db5 Improve documentation and messages for the new CMP0017
db44848 Prefer files from CMAKE_ROOT when including from CMAKE_ROOT
1e69c6f Merge branch 'user-policy-defaults' into policy-CMP0017
65a0a2a Merge branch 'include-command-whitespace' into policy-CMP0017
e33cbda VSMidl Test: Use correct include_directories with VS6 (#11461)
262da91 Prohibit space in HOME value for VSMidl test.
13caaa3 VS10: Finish Midl support (#11461)
Control the root directory of the default directory presented to
the end user of an NSIS installer by a CPack variable.
Previously, the value used in the NSIS script was $PROGRAMFILES,
which is equivalent to the "ProgramFiles" environment variable.
That default value is still the same, but now a project may
override the value by setting this new variable.
Previously, it was hard-coded at 1000 seconds. Now it uses
the value of CMAKE_LONG_TEST_TIMEOUT, which has a minimum
value of 1500 seconds, but might have a longer value depending
on the CTEST_TEST_TIMEOUT value of the driving dashboard.
This should help avoid test failures on overloaded dashboard
machines where it really does take that long to finish the
test successfully.
GNU Make 3.82 incorrectly parses make dependencies involving parentheses
in path names. See related upstream issue:
http://savannah.gnu.org/bugs/?30612
Skip testing the ()-named subdirectory.
Previously, only strings containing "http:" qualified as
URLs when found in CPACK_NSIS_MENU_LINKS. Now, we use a
regex to detect strings beginning with any of the following:
ftp://
ftps://
http://
https://
news://
mailto:
This commit also moves the caller of CreateMenuLinks outside
the "if (cpackPackageExecutables)" block, allowing clients to
use CPACK_NSIS_MENU_LINKS without also having CPACK_PACKAGE_EXECUTABLES
defined. That bit of this commit fixes the remainder of the
issue described in http://public.kitware.com/Bug/view.php?id=7828
Also, added a set(CPACK_NSIS_MENU_LINKS ...) to the CPackComponents
test to enable verifying that all of this actually works.
VS6 builds put midl output directly in CMAKE_CURRENT_BINARY_DIR.
Adjust test include_directories to match. Fixes test failure
on dashboard machine DASH3.
Some Windows machines actually define HOME in their
environment. And some of them actually put a directory
with a space in the name as the value.
Make sure the HOME value (CMake variable) in this CMakeLists
file does not contain a space.
This commit addresses all of the following:
http://public.kitware.com/Bug/view.php?id=8165http://public.kitware.com/Bug/view.php?id=10687http://public.kitware.com/Bug/view.php?id=11311http://public.kitware.com/Bug/view.php?id=11461
With this commit, the midl support for VS10 is as
complete as midl support ever was for VS9 and earlier.
The VSMidl test should run on all Visual Studio
generator based dashboards.
CMake no longer sends C++ compiler /D flag values
to the midl compiler in Visual Studio generated
projects. I think if we want to add that in the
future, we should add a way to pass midl compiler
specific flags and perhaps an optional way to add
in the C++ definitions, too. For now, not sending
them along gets past the immediate problem wherein
idl files in a CMake VS generated project just didn't
work at all.
The VSMidl test added in this commit was inspired by
the patch attached to 8165.
The test had to be modified such that it will run in
a directory whose name contains no spaces. There is an
existing bug filed against VS10's midl asking Microsoft
to fix that problem. But for now, the test added in this
commit works by copying the source directory to a location
that avoids spaces in the directory names.
Inspired-By: Robert Lenhardt
8113621 Establish pass criteria for the Trilinos contract test.
7348561 Use m prefix in shorttag value to indicate "md5 of tarball"
c8ac930 Add contract test for Trilinos 10.6.1 snapshot.
971692c Build enable_language command during bootstrap
960ace1 Add testing for windows resources for mingw/msys/cygwin and remove for watcom.
060d6e8 Add support for windres to cygwin.
b2f308c Add support for windows resources with mingw/msys.
8c7b19d Only run resource test for MSVC compilers.
753e208 Disable incremental testing for this test, it crashes vs9 linker.
16e7d4b Add flags to resource builds on vs 2010 with a test.
This patch makes include() and find_package() prefer cmake files
located in CMAKE_ROOT over those in CMAKE_MODULE_PATH.
This makes sure that the including file gets that file included
which it expects, i.e. the one from cmake with which it was tested.
It only changes behaviour when such an included file exists both
in CMAKE_MODULE_PATH and in CMAKE_ROOT.
This comes together with a new policy CMP0017, with default
behaviour it behaves as it always did, but warns.
With NEW behaviour it includes the file from CMAKE_ROOT
instead from CMAKE_MODULE_PATH. This fixes (if CMP0017 is set)
building KDE 4.5 with cmake >= 2.8.3.
Also a basic test for this policy in included.
Check CMAKE_POLICY_DEFAULT_CMP<NNNN> for a default when policy CMP<NNNN>
would otherwise be left unset. This allows users to set policies on the
command line when the project does not set them. One may do this to
quiet warnings or test whether a project will build with new behavior
without modifying code. There may also be cases when users want to
build an existing project release using new behavior for policies
unknown to the project at the time of the release.
667a90a Fix sentence break in add_test documentation
96309fc Make TestsWorkingDirectory test a C file
a4a5e37 Use iostream to make Borland happy
cfe53cd Fully specify the path to old-signature add_test
017d4e9 Group adding tests with its properties
561cc33 Only test the default cwd with Makefiles
d87bae7 Simplify the _default_cwd derivation
992c74f Use --><-- markers to denote the path
5249551 Flip slashes around on Windows
0a014da Add ctype.h include for toupper()
af12f83 Fix header includes for C++ and Visual Studio
5597aa2 Rename the project to match the test
9bf4165 Add tests for WORKING_DIRECTORY arg to add_test
42de5d0 Add WORKING_DIRECTORY argument to add_test
7679f9f Rename WorkingDirectory test
d95f817 Add the WORKING_DIRECTORY property to tests
Add a ValidateBuild.cmake script that runs after the Trilinos
dashboard run is complete. In that script, look for some expected
Trilinos executable files. Run the basic Teuchos unit tests
executable and expect it to return 0 for no errors.
Also, patch the main CMakeLists.txt file to get rid of new warnings
from CMake when variables passed in on the command line go
un-referenced in the CMakeLists processing.
4499d50 Mark CustomCommand test perconfig.out as SYMBOLIC
f0cdb60 Introduce "generator expression" syntax to custom commands (#11209)
4749e4c Record set of targets used in cmGeneratorExpression
ef9e9de Optionally suppress errors in cmGeneratorExpression
45e1953 Factor per-config sample targets out of 'Testing' test
4091bca Factor generator expression docs out of add_test
bfb7288 Record backtrace in cmCustomCommand
86979e4 Change cpack run and verify script to work with multi-config generators.
cdf92c9 Precise the project config type when invoking cpack
08f829b Arrange output in a better way
58bd4f2 CPackTest spit out more output in case of failure
dd2a5aa CPack Default component test for ZIP should be OK
88b7f42 CPack new tests for component install
In vs2010 a bad project file could be generated if a .c or .cxx file
was marked with HEADER_FILE_ONLY, if it was in a library that contained
both c and c++ code. This fixes the error in the code, and adds a test
for this case.
XCode and Visual Studio generators can run from
${EXECUTABLE_OUTPUT_PATH}/${CMAKE_BUILD_TYPE} and determining this at
testing time is not feasible without adding in more
PASS_REGULAR_EXPRESSION's which may create false positives.
Since the parsing code is in cross-platform, generator-agnostic code,
if it passes with Makefiles, it should work with other generators on
other platforms.
The tests-if-CYGWIN topic made a change to Tests/Testing/CMakeLists.txt
in code that the custom-command-generator-expressions topic moved to the
Tests/PerConfig/CMakeLists.txt file. Make the same change to the same
content in the new file. (Only a small part of the file moved so rename
detection did not do this automatically.)
Brad King
Alex Neundorf
David Cole
Rolf Eike Beer
Bill Hoffman
Clinton Stimpson
Modestas Vainius
Stephen Kelly
Eric NOULARD
Aaron C. Meadows
Peter Collingbourne
Peter Kuemmel
Jean-Christophe Fillion-Robin
Sean McBride
Manuel Klimek
Andreas Schneider
Zach Mullen
Michael Wild
M. Konrad
Tim Hütz
Ben Boeckel
Richard Bateman