3af13782 Help: Update discussion of relocable packages in cmake-packages(7)
227992c3 Help: Reorganize and refine discussion of relocatable packages
031d894f Help: Place relocatable package notes in their own subsections
6e331ce9 Help: Fix typo in cmake-packages(7) manual
ba9b9d79 Help: Fix syntax in non-relocatable usage requirements example
Many places in our documentation refer to "Makefile Generators" or
"Visual Studio" generators as a group of generators. Give such
places a linkable document section to reference since they cannot
cross-reference the individual generators in the groups.
Explain at the beginning of the section the requirements for a package
to be relocatable to justify the rest of the section content.
Generalize example to use fictional package names instead of real ones,
especially because FindBoost provides no alternative yet. Reword the
discussion to represent the preferred approach as "ideal" but also
suggest workarounds when find modules do not provide the imported
targets.
Re-organize the content added to the cmake-packages(7) manual by
* commit v3.0.0-rc1~184^2 (Help: Document export(EXPORT) in the
cmake-packages manual, 2013-12-23),
* commit v3.0.0-rc1~154^2~1 (Help: Add notes about relocatability
of config-file packages, 2014-01-07), and
* commit v3.2.0-rc1~345^2 (Help: Warn that paths should not be used
in INTERFACE_ build properties, 2014-11-22).
These commits broke the natural flow of the original manual and made
wording after the new content make less sense. Move the content into
new subsections to restore the flow of the original manual and to
make explicitly the purpose of the new content.
Shorten the relocatable usage requirement "warnings". Refer to the
new cmake-packages(7) manual subsection to reduce duplication. Also
clarify the distinction between paths to library dependencies and
paths to their header files.
These notes apply only for the use case of creating a package for
redistribution on machines other than that where it is built. Clarify
this to readers by placing the discussion in dedicated sections titled
accordingly.
Beginning in CUDA 5.5 a static version of the cuda runtime library
became available. Since nvcc defaults to using this library over the
shared version, FindCUDA will also default to using this version. There
are many advantages to using the static version (most importantly to
avoid conflicts with multiple versions when building a CUDA based
library). Offer a CUDA_USE_STATIC_CUDA_RUNTIME option to control
this behavior.
Add policy CMP0059 to cover this change. The property has been
deprecated since CMake 2.4 anyway.
This will help clean up cmMakefile -- the DefineFlagsOrig member should
not need to exist.
Much of the information in the old set() command documentation is now
covered in the cmake-language(7) manual. Rewrite the documentation
with this in mind. Split up the signatures for each kind of variable
into different subsections.
Make wording of the directory and target properties more consitent
and complementary. Specify that the value is a ";-list" with a link
to the cmake-language(7) manual section on lists.
Revert commit v3.0.0-rc1~175^2~20 (add_dependencies: Disallow use with
INTERFACE_LIBRARY, 2013-12-25). Teach our dependency analysis to
transitively follow INTERFACE target utility dependencies as was done or
IMPORTED targets in commit v2.8.6~127^2~1 (Allow add_dependencies() on
imported targets, 2010-11-19). Extend the InterfaceLibrary test with a
case to cover header generation for a header-only INTERFACE library via
a custom target.
Extend the ``DATA{Dir/,...}`` syntax with a new ``RECURSE:`` option
to enable recursive matching of associated files. This will allow
an entire directory tree of data to be referenced at once.
bd9c7f9b Ninja: Add policy to require explicit custom command byproducts
ed8e30b0 cmGlobalNinjaGenerator: Optimize handling of known build outputs
ad094f43 cmGlobalNinjaGenerator: Fix spelling of "unknown"
82a37d3c cmGlobalNinjaGenerator: Drop unused member
4178cd88 Help: Add notes for topic 'xcode-xctest'
87a4b858 Tests: Add XCTest example to test Frameworks and Cocoa App Bundles
ba14510b OS X: Add FindXCTest module
3714955b OS X: Add handling for XCTest bundles
54a5cdbb Tests: Compute Xcode version for any generator on OS X
Add a module to lookup XCTest Framework and xctest utility.
It also provides APIs for creating 'xctest' targets.
Signed-off-by: Gregor Jasny <gjasny@googlemail.com>
Add policy CMP0058 to avoid generating 'phony' ninja rules for unknown
custom command dependencies. This requires projects to specify their
custom command byproducts explicitly. With this requirement we no
longer have to assume that unknown custom command dependencies are
generated and can instead simply assume they are source files expected
to exist when the build starts. This is particularly important in
in-source builds. It is also helpful for out-of-source builds to allow
Ninja to diagnose missing files before running custom command rules that
depend on them.
GLOB lists directories by default and GLOB_RECURSE does not.
LIST_DIRECTORIES enables user to control the behavior explicitly for
consistently for both GLOB and GLOB_RECURSE.
Implement a brand new FindMatlab module:
- Add support for versions and components.
- Find Matlab and its version in a more precise and multiplatform way.
- Add API to create a new mex extension with documentation.
- Add API to add matlab unit tests (with or without the unit test framework).
- Find as much as possible based on a single Matlab_ROOT_DIR cache entry
and allow the user to change it to re-find everything.
ec428faf Genex: Extend cmGeneratorExpressionContext constructor.
082b6a9d Genex: Split cmGeneratorExpressionContext into own file.
9df1f0fc Genex: Split cmGeneratorExpressionNode into own file.
80b9f0cb Genex: Extract an evaluateWithContext method.
642048ce Help: Move docs of $<0:...> and $<1:...> to output section.
232a6883 Help: Add release notes for target-language-genex.
9e168941 File(GENERATE): Process genex evaluation files for each language.
b734fa44 Genex: Allow COMPILE_LANGUAGE when processing include directories.
0b945ea9 Genex: Allow COMPILE_LANGUAGE when processing compile definitions.
5c559f11 Genex: Enable use of COMPILE_LANGUAGE for compile options.
e387ce7d Genex: Add a COMPILE_LANGUAGE generator expression.
4a0128f4 VS6: Compute CMAKE_*_FLAGS and COMPILE_DEFINITIONS* only when needed
Previously the module did not support projects using installation
components because install(PROGRAMS) was never called with COMPONENT.
Add an option to specify the COMPONENT so that projects doing this do
not have to resort to using CMAKE_INSTALL_SYSTEM_RUNTIME_LIBS_SKIP and
writing the install rule by hand.
4efef3f7 Help: Clarify that ARGV# beyond ARGC will have an undefined behavior (#15380)
e3363bfb Help: Refine the .rst formatting of macro and function documentation
Allow URL templates to contain a %(algo:<key>) placeholder that is
replaced by mapping the canonical hash algorithm name through a map
defined by the <key>.
Extend the Module.ExternalData test to cover the behavior.
Extend the RunCMake.ExternalData test to cover error cases.
6cc01c14 CPackWIX: Add release notes for the wix-shortcut-properties topic.
135febf0 CPackWIX: Enhance CMake CPack WIX generated installer.
e6731f48 CPackWIX: Add new CPACK_STARTUP_SHORTCUTS property.
279605f5 CPackWIX: Add installed file properties for the creation of shortcuts.
53d7daff CPackWIX: Refactor start menu and desktop shortcut creation.
dc0f3fb4 CPackWIX: Explicitly list CPack WIX headers for IDE convenience.
Since jsoncpp 0.7.0 (2014-11-20) the upstream may provide a CMake
package configuration file such that find_package(jsoncpp) will find a
jsoncppConfig.cmake file. In order to avoid conflicting with this
(especially on case-insensitive filesystems), and since we always prefer
projects to provide package config files (that they maintain), it is
better to not provide FindJsonCpp publicly.
Move FindJsonCpp into a private source directory that is not installed
so that we can still use it for building CMake itself.
Reported-by: Ryan Pavlik <ryan.pavlik@gmail.com>
The find_package command already knows how to compute installation
prefixes from PATH. Use the same approach to establish prefixes for
find_library, find_file, and find_path to use to look in directories
like "<prefix>/lib[/<arch>]" and "<prefix>/include" for libraries and
headers. This will reduce the amount of configuration end users need to
do to establish a work environment rooted under a specific prefix.
4cf3589e Help: Add notes for topic 'compiler-version-Fortran'
f611406f Fortran: Test that CMAKE_Fortran_COMPILER_VERSION is set (#15372)
c6e1f464 Fortran: Detect G95 compiler version
0033faac Fortran: Detect PGI compiler version
302d47b1 Fortran: Detect XL and VisualAge compiler versions
8c8b77a5 Fortran: Detect GNU compiler version
49562a77 Fortran: Detect PathScale compiler version
aa77b631 Fortran: Detect SunPro compiler version
2e09c423 Fortran: Detect Intel compiler version
e6ebc814 Fortran: Add infrastructure to detect compiler version (#15372)
Pre-C++98 compilers required that the template argument be
used in the function parameters. Those compilers are no longer
supported as hosts, so drop the workaround.
This will allow us to use a value other than just the config name
for the project OutputDirectory setting used for $(OutDir).
Also use $(ConfigurationName) instead of $(OutDir) for the link
directory configuration suffix since that is a hard-coded instance of
a use case for CMAKE_CFG_INTDIR.
This will allow per-config destinations for targets in EXPORT sets.
Using multiple install(TARGETS) with separate CONFIGURATIONS is
rejected as a target appearing more than once in an export set.
Now instead one can write
install(TARGETS foo EXPORT exp DESTINATION lib/$<CONFIG>)
to get a single logical membership of the target in the export set
while still having a per-config destination.
f7e33820 Add release notes for export-interface-source-files.
6da65b39 Allow export of targets with INTERFACE_SOURCES.
736bcb96 Tests: Move IfacePaths test stderr files.
d9f8390d Tests: Run IfacePaths tests with a parameter.
cc152094 Tests: Split part of include_directories test to a generic location.
63668954 Help: Add notes for topic 'makefile-progress-improvements'
ae775fe8 Makefile: Change link step message color to bold green
7bb50e4a Makefile: Add progress to link step messages
c6ada827 Makefile: Print all color escape sequences before newline
8521fdf5 Makefile: Fix output during parallel builds (#12991)
69ac6d27 bootstrap: Enable color Makefile output
1814cf74 Help: Add notes for topic 'add-CheckFortranCompilerFlag'
54e900ab CheckFortranCompilerFlag: Add test case
393a45e2 CheckFortranCompilerFlag: Add module to check Fortran flag existence
In commit v3.0.0-rc1~9 (Help: Rename 3.0 release notes to 3.0.0,
2014-02-19) we anticipated the possibility of bugfix-only release notes.
However, in practice we have no release notes for bug fix releases
because we do not cover bug fixes in release notes at all, only new
features. Instead we've been updating the feature-level release notes
document in bug fix releases, treating errors in the document as bugs.
It makes more sense to maintain release notes at the feature-release
level, so rename the documents accordingly. Also update the document
titles and intro text to refer only to feature versions and not bugfix
versions.
Add section headers similar to the 3.1 release notes and move each
individual bullet into an appropriate section. Revise and consolidate
some bullets covering related areas.
Co-Author: Stephen Kelly <steveire@gmail.com>
Move all development release notes into a new version-specific document:
tail -q -n +3 Help/release/dev/* > Help/release/3.2.0.rst
git rm -- Help/release/dev/*
except the sample topic:
git checkout HEAD -- Help/release/dev/0-sample-topic.rst
Reference the new document from the release notes index document.
Add a title and intro sentence to the new document by hand.
809a5a5e Help: Add notes for topic 'CTestCoverageCollectGCOV-refinements'
03c0812c CTestCoverageCollectGCOV: Fix handling of international characters
8caa4e72 CTestCoverageCollectGCOV: Add test case
5c828cc8 CTestCoverageCollectGCOV: Allow custom flags to gcov
30cb628e CTestCoverageCollectGCOV: Fix handling of large file counts
Define an empty string in CMAKE_<LANG>_STANDARD_DEFAULT to mean that
the toolchain has no notion of lanuage standard levels. In this case
the <LANG>_STANDARD[_REQUIRED] properties will have no effect.
Update the RunCMake.CompileFeatures test to exclude the
LinkImplementationFeatureCycle test when there is no standard default.
It can never fail because no use of specific features will adjust the
CXX_STANDARD level required for any target since the standard levels
have no meaning in this case.
ab9fa54d Xcode: Switch to internal CMAKE_MAKE_PROGRAM lookup by generator (#15324)
11e2e6ca Xcode: Select make program at build time
e4055a61 Xcode: Add internal API to find xcodebuild
The "cmakexbuild" wrapper is not needed for Xcode 4 and above, and the
path to it may change when CMake moves. Avoid storing a specific path
to a build program in CMakeCache.txt and instead compute the value for
CMAKE_MAKE_PROGRAM on demand. However, if a user does set the value
explicitly then honor it.
This does for Xcode what commit v3.0.0-rc1~260^2~4 (VS: Switch to
internal CMAKE_MAKE_PROGRAM lookup by generators, 2013-11-15) did for
Visual Studio generators.
This will make them use the 'console' pool with the Ninja generator.
Impacted targets are:
- Built-in targets: install, install/local, install/strip, tests,
package, package_source, rebuild_cache
- Targets provided by the CTestTargets module: Nightly, Continuous,
Experimental,
and all their variants (*Start, *Configure, ...)
Read file names from the lines of a specified file. Reject input lines
starting in '-' to leave room for option parsing to be added later. Add
just '--add-file=' now to allow files starting in '-' to be specified.
d0adcccb try_run: Add tests for LINK_LIBRARIES with mock libraries.
223c5cb7 try_run: Add test for bad link libraries.
e2b1f058 try_run: Add support for LINK_LIBRARIES option.
Most functionality is already implemented in Source/cmCoreTryCompile.{h,cxx}.
Document and improve argument parsing.
This functionality is already being used by a number of modules, like
CheckCSourceCompiles.cmake, but it is not documented.
The command has been documented as 'deprecated', but it is not really
slated for removal and can still be used. Clarify this in the
documentation. While at it, revise the documentation to use wording
more consistent with that now in target_link_libraries.
Suggested-by: Christoph Grüninger <foss@grueninger.de>
When using system curl, we trust it to be configured with desired CA
certs. When using our own build of curl, we use os-configured CA certs
on Windows and OS X. On other systems, try to achieve this by searching
for common CA cert locations. According to a brief investigation, the
curl packages on popular Linux distros are currently configured as:
* Arch: /etc/ssl/certs/ca-certificates.crt
* Debian with OpenSSL: /etc/ssl/certs
* Debian with GNU TLS: /etc/ssl/certs/ca-certificates.crt
* Debian with NSS: /etc/ssl/certs/ca-certificates.crt
* Fedora: /etc/pki/tls/certs/ca-bundle.crt
* Gentoo with OpenSSL: /etc/ssl/certs
* Gentoo without OpenSSL: /etc/ssl/certs/ca-certificates.crt
Teach CMake and CTest to look for these paths and use them as a CA path
or bundle when no other os-configured or user-specified CAs are
available.
Provide a function to run gcov and create a tarball of results.
Since CDash tracks the md5sum of the files uploaded, use the
--mtime option with "cmake -E tar" so that tar files could be
created that would have the same md5sum with the same content.
This adds support for the new cdash API where arbitrary files can be
uploaded to the CDash server. This CDash API communicates via json
files so the json parser jsoncpp was added to the Utilities directory.
Add an option to set the mtime of entries in a tarball so that one can
create a tarball with a consistent content hash (e.g. MD5) for a given
set of files regardless of their current timestamps on disk. This will
be useful for submission of tarballs to CDash, which tracks content
hashes to avoid duplication.
Inspired-by: Bill Hoffman <bill.hoffman@kitware.com>
004e1540 Features: Record for GNU 4.4.
2a5ca650 Features: Wrap failure-test in UNIX condition.
1ae2c6b2 Features: Blacklist cxx_constexpr test for GNU 4.5.
c66e3317 Features: Use a more-common feature in cycle-test.
c43a6dc5 Features: Update comment in test to match the code.
78259135 Features: Test presence of cxx_auto_type with genex.
7b9fc88b Features: Remove outdated comment.
00194ea7 Help: Add notes for topic 'SolarisStudio-compile-features'
bcb04783 Features: Record for SolarisStudio 12.4.
536c535c Features: Adjust cxx_variadic_templates unit test for SolarisStudio.
5d57970d Features: Use variable in cxx_inheriting_constructors test.
69182ce4 Features: Ensure that the cxx_auto_type test is correct.
59e6e15c Help: Add notes for topic 'WriteCompilerDetectionHeader-multi-file-lang'
54156d72 WCDH: Generate per-language files in multi-file mode.
d84d6ed4 WCDH: Allow compilers to specify features for one language but not the other.
7dcdfec9 WCDH: Find a language-specific DetermineCompiler.cmake if present.
770ba876 Help: Add notes for topic 'GNU-4.6-compile-features'
b15c008f Features: Record for GNU 4.6.
f13a2eb1 Features: Adjust the RunCMake test to use more-common features.
1f19ac4d Features: Adjust cxx_variadic_templates unit test for GNU < 4.7.
0798d1e5 Features: Extend the generalized_initializers test for GNU < 4.7.
938bd94e Features: Test __GXX_EXPERIMENTAL_CXX0X__ macro for GNU < 4.7 compatibility.
462c630b Features: Don't test __cplusplus value for CXX98 on GNU.
222ec86f Features: Test an old value of __STDC_VERSION__ for GNU < 4.7 compatibility.
6e909035 Features: Record C/CXX dialect flags for GNU 4.6.
bfc995cc Features: Remove wrong content from else() condition.
1532b921 Features: Make cxx_noexcept available from GNU 4.6.
1f4649e6 Features: Update the default_dialect test for old GNU-like compilers.
a60027a6 Features: Ensure appropriate return value from feature test macros.
This fixes several reported bugs about CMake not handling
non-ascii paths on Windows.
Practically, the use of some unicode characters may still
be limited by the build or compiler tools.
For example, a user may be limited by the build tools to
using characters within the Windows ANSI code page (which can
include non-ascii characters in the current system language).
da928d30 Help: Add notes for topic 'Apple-compiler-selection'
1f085e11 OS X: Resolve compiler in /usr/bin to that reported by Xcode xcrun
85d31735 CMakeDetermineCompiler: Factor out xcrun invocation into a macro
dcd72a74 Help: Add notes for topic 'Xcode-clang-compile-features'
3ad893b5 Features: Record for historical Xcode clang versions.
98965fb1 Features: Record dialect flags for AppleClang 4.0+.
Revert commits:
2d738ce3 Help: Add notes for topic 'feature_record_msvc'
f73718c9 Features: Enable writing of MSVC compiler feature header.
64c30bdc Features: Record for MSVC C++ 2015 and MSVC C 2010-2015.
225c0ef8 Features: Record for MSVC 2010-2013.
This topic was merged to master prematurely, so remove it.
4035ef78 cmake -E tar: error out on multiple compression formats
d811d238 cmSystemTools: use an enumeration for compression formats
df16dcfb cmake -E tar: add support for .xz files with 'J'
b0a5d393 cmake -E tar: clean up flag documentation
3660d063 cmTarget: Use insert instead of std::copy.
5c28495f Help: Remove documented restriction on template use.
ac3d3829 Help: Remove documented restriction on find in conditions.
36b8de56 Help: Remove documented restriction on insert APIs.
6162c919 Use two-iterator std::set::insert where appropriate.
238dd2fb Use insert instead of a loop in some cases.
2f7ef7e3 Revert "Misc. fixes for the Oracle / Sun compiler."
4c69ec6f SolarisStudio: Use alternative standard library to build CMake.
2d738ce3 Help: Add notes for topic 'feature_record_msvc'
f73718c9 Features: Enable writing of MSVC compiler feature header.
64c30bdc Features: Record for MSVC C++ 2015 and MSVC C 2010-2015.
225c0ef8 Features: Record for MSVC 2010-2013.
Support was added in commit v3.1.0-rc1~475^2 (Features: Add support
for C++14 features., 2014-05-06), but the documentation for this
property was not amended.
AppleClang does not support the cxx_thread_local feature, even
though it is based on a Clang version which does support the
feature.
http://stackoverflow.com/a/23850891/2428389
A possible reason for that is that thread_local might be used as
a variable in existing Apple SDK headers.
Extend the WriteCompilerDetectionHeader module to generate a define
for that feature with portability fallbacks. For the avoidance of
making it easy to write code which looks correct but which has odd
runtime behavior, don't set the define symbol at all if no
equivalent keyword is known.
bb83cdaa Help: Add notes for topic 'AppleClang-5.1-features'
bd6b42c1 Features: Record for AppleClang 5.1
b341799e Tests: Fix RunCMake.CompileFeatures test NonValidTarget2 case
The change in commit v3.1.0-rc1~174^2 (Makefile: Handle '#' in
COMPILE_OPTIONS, 2014-08-12) was not compatible with code that
tries to workaround the original bug. Unfortunately there is no
good way to fix the bug in a compatible way. Add a release note
to call attention to the change.
On OS X, when CMAKE_USE_OPENSSL is OFF, use the OS implementation.
This will allow the OS-configured CA list to be trusted automatically.
This is supported on OS X 10.6 and above using AppleClang, Clang, and
GNU compilers.
Also add a 'CMAKE_ANDROID_API_MIN' variable to set the property
default. Teach the VS generator to write the MIN API value into
Nsight Tegra project files.
When install(EXPORT) is given an absolute destination we cannot compute
the install prefix relative to the installed export file location.
Previously we disallowed installation of targets in such exports with a
relative destination, but did not enforce this for target property
values besides the location of the main target file. This could lead to
broken installations when the EXPORT is installed to an absolute path
but usage requirements are specified relative to the install prefix.
Since an EXPORT installed to an absolute destination cannot be relocated
we can just hard-code the value of CMAKE_INSTALL_PREFIX as the base for
relative paths. This will allow absolute install(EXPORT) destinations
to work with relative destinations for targets and usage requirements.
Extend the ExportImport test with a case covering this behavior.
The use of FeatureSummary inside a find module is not a convention
yet used by upstream CMake modules. Drop the example from the
documentation about how to write find modules. If in the future
we add use of FeatureSummary to many of the upstream find modules
then this example can be restored as part of establishing the
convention.
The use of FeatureSummary inside a find module is not a convention
yet used by upstream CMake modules. Drop the example from the
documentation about how to write find modules. If in the future
we add use of FeatureSummary to many of the upstream find modules
then this example can be restored as part of establishing the
convention.
In commit v3.1.0-rc1~484^2 (Help: Format and revise file() command
documentation, 2014-05-23) the signature of file(GENERATE) was
accidentally simplified too much and dropped specification of the
required argument ordering. Restore the signature to make the order
clear.
If this option is enabled, the test step is created with the
EXCLUDE_FROM_MAIN option, and if TEST_BEFORE_INSTALL is enabled, the
install step does not depend on the test step.
This means that the test step is never executed, unless the test target
is explicitly created by calling ExternalProject_Add_StepTarget, or by
passing it with the STEP_TARGETS option, or with the EP_STEP_TARGETS
directory property.
An IMPORTED target in either type of package can equally depend on
an IMPORTED target in a Find module, which must be found as a
dependency, which is presumably the problem being implied. This is
not a distinction of creating an IMPORTED target in a Find module.
The FindXerces module was added in commit v3.1.0-rc1~155^2 (FindXerces:
New module to find Apache Xerces-C++, 2014-08-17). However, there are
two implementations of Xerces, one in C++:
http://xerces.apache.org/xerces-c/
and one in Java:
http://xerces.apache.org/xerces-j/
Rename FindXerces to FindXercesC to clarify that it is about the C++
implementation.
While at it, add the missing CMake 3.1 release note about this module.
Suggested-by: Erik Sjölund <erik.sjolund@gmail.com>
Copy CMAKE_EXE_LINKER_FLAGS into the test project generated by
try_compile, just like we already copy CMAKE_<LANG>_FLAGS.
Add CMake Policy CMP0056 to activate this behavior in a compatible way,
but do not warn by default when the policy is not set since it will
affect all try_compile calls.
Extend the RunCMake.try_compile test with a case covering this behavior
for each policy setting.
With PushScope and PopScope, keeping track of another bit of data for
each scope isn't easy. Instead, store it as another CMake variable so it
gets implicitly tracked along with everything else.
This works in a revert of commit
7d674b5f0b.
Provide options to fail without blocking or to block up to a timeout.
Provide options to specify the scope containing the lock so it can be
released automatically at the end of a function, file, or process.
Extend the RunCMake.file test with cases covering the file(LOCK) command
usage and error cases.
Add a VS_DEPLOYMENT_LOCATION source file property to specify where to
put files that are part of the package. For example:
set_property(SOURCE ${ASSET_FILES} PROPERTY VS_DEPLOYMENT_LOCATION "assets")
Without this, sources marked with VS_DEPLOYMENT_CONTENT cannot be
located properly.
Create properties VS_SHADER_ENTRYPOINT and VS_SHADER_MODEL. Without
these many .hlsl source files may not be possible to use. Extend the
VSWinStorePhone test project to cover them.
Revert the feature added by commit v3.1.0-rc1~420^2~2 (FindOpenGL:
Provide imported targets for GL and GLU, 2014-05-31). Unfortunately it
does not work on Windows because the full path to each library file is
not actually known. The IMPORTED_LOCATION of an imported target must be
a full path, but OPENGL_gl_LIBRARY is just 'opengl32' on Windows because
the actual library file is in some implicit link directory that we may
know know.
More infrastructure will be needed in CMake to allow a name-only
imported library. Until that exists, we will not be able to provide
imported targets in FindOpenGL.
In commit 079e8469ab (... OpenGL always needs X11 on Unix, 2002-09-05)
the FindOpenGL module was taught to search for X11 as a dependency of
the OpenGL library. This was done without a detailed explanation, and
the dependency should not be explicitly needed because OpenGL headers
should not expose applications to X11 APIs directly.
Unfortunately the only way to know if anything legitimately depends on
this behavior (perhaps in static library cases) is to simply remove it
and wait for issues to be reported. If so, then we can add some kind of
compatibility setting for this later. Add a release note to draw
attention to this change.
Reported-by: Dainius "GreatEmerald" Masiliūnas <pastas4@gmail.com>
Some applications only need the OpenSSL crypto library and want to avoid
linking against the SSL library. Set OPENSSL_CRYPTO_LIBRARY and
OPENSSL_SSL_LIBRARY in the code paths that do not need to find them
separately, and document them publicly. This allows applications to be
more specific when linking against OpenSSL.
8a75c7ef Help: Document the export limitation of INTERFACE_SOURCES.
e1348056 Export: Disallow export of targets with INTERFACE_SOURCES
bb5905bb cmTarget: Don't allow relative paths in INTERFACE_SOURCES
Since commit v3.1.0-rc1~479^2~1 (Add an "installed file" property
scope, 2014-05-15) the get_property and set_property commands
support an 'INSTALL' scope. Add documentation for this scope.
bb1111ea Help: Warn that paths should not be used in INTERFACE_ build properties.
96691d12 Help: Fix typo in genex in documentation.
f8f02451 Help: Use a property-specific command instead of the generic one.
8609a884 Help: Make remaining build property docs consistent.
bcface39 Help: Link to target_link_libraries from target properies.
e12926e7 Help: Format the LINK_INTERFACE_LIBRARIES target properies.
c8540e94 Help: Unify the help text of INTERFACE_ build properties.
Since commit v2.8.11~227^2~1 (Don't allow targets args in the new target
commands, 2013-01-29) the target_include_directories command does not
support target names on the right hand side, but that commit forgot to
remove it from the docs. It was never released with such support.
Update the command documentation now.
2d75d7e5 Help: Add notes for topic 'console-pool'
f42d86f0 Ninja: Implement USES_TERMINAL using the console pool if available
f281ae01 Ninja: Remove unused declaration
d5eae556 Ninja: factor out the test for console pool support
4d1fedf4 Give the interactive cache editor the USES_TERMINAL property
fe5d6e8c Add USES_TERMINAL option for custom commands
ad6ee426 Rename doing_verbatim to doing_nothing
A common idiom in CMake-based build systems is to have custom commands
that generate files not listed explicitly as outputs so that these
files do not have to be newer than the inputs. The file modification
times of such "byproducts" are updated only when their content changes.
Then other build rules can depend on the byproducts explicitly so that
their dependents rebuild when the content of the original byproducts
really does change.
This "undeclared byproduct" approach is necessary for Makefile, VS, and
Xcode build tools because if a byproduct were listed as an output of a
rule then the rule would always rerun when the input is newer than the
byproduct but the byproduct may never be updated.
Ninja solves this problem by offering a 'restat' feature to check
whether an output was really modified after running a rule and tracking
the fact that it is up to date separately from its timestamp. However,
Ninja also stats all dependencies up front and will only restat files
that are listed as outputs of rules with the 'restat' option enabled.
Therefore an undeclared byproduct that does not exist at the start of
the build will be considered missing and the build will fail even if
other dependencies would cause the byproduct to be available before its
dependents build.
CMake works around this limitation by adding 'phony' build rules for
custom command dependencies in the build tree that do not have any
explicit specification of what produces them. This is not optimal
because it prevents Ninja from reporting an error when an input to a
rule really is missing. A better approach is to allow projects to
explicitly specify the byproducts of their custom commands so that no
phony rules are needed for them. In order to work with the non-Ninja
generators, the byproducts must be known separately from the outputs.
Add a new "BYPRODUCTS" option to the add_custom_command and
add_custom_target commands to specify byproducts explicitly. Teach the
Ninja generator to specify byproducts as outputs of the custom commands.
In the case of POST_BUILD, PRE_LINK, and PRE_BUILD events on targets
that link, the byproducts must be specified as outputs of the link rule
that runs the commands. Activate 'restat' for such rules so that Ninja
knows it needs to check the byproducts, but not for link rules that have
no byproducts.
Now that we know the year component of this VS version we
can add it to the generator name. For convenience, map
the name without the year to the name with the year.
Teach the add_custom_command and add_custom_target commands a new
USES_TERMINAL option. Use it to tell the generator to give the command
direct access to the terminal if possible.
Format the reStructuredText markup manually. Organize the command
options into a definition list. Use inline markup to cross-reference
related documents.
string SUBSTRING command now ignores length if it points
past end of string and uses end of string instead.
String SUBSTRING tests now cover more corner cases.
3c497f11 Help: Add notes for topic 'ExternalProject_UPDATE_DISCONNECTED'
aba5cec6 ExternalProject: Add unit tests for UPDATE_DISCONNECTED
3f606fa7 ExternalProject: Add UPDATE_DISCONNECTED option
c0b749cf ExternalProject: Always add a command to a step
Add support for Sun/Uniforum/GNU gettext libintl. This belongs in CMake
rather than upstream because:
* There are multiple upstreams (Sun, GNU).
* It may or may not be in the glibc C library depending
upon the platform and build options used.
Although we already have a FindGettext module, that is for the tools.
This module is for the library, and is independent because it's
perfectly OK to use libintl without the gettext tools (and vice versa),
and they might not all be found. Add cross references between the two
modules in notes to make the relationship clearer.
The changes made by commit v3.1.0-rc1~46^2~1 (FindITK: Drop this ancient
compatibility module, 2014-10-02) and commit v3.1.0-rc1~46^2 (FindVTK:
Drop this ancient compatibility module, 2014-10-02) need to come with
release notes explaining that the modules were dropped. Also remove a
release not related to an update made to FindVTK that was never
released.
1531df2b configure_file: Warn about unknown arguments
4abbb140 Qt4: Fix configure_file call to use COPYONLY, not COPY_ONLY
bd7ba8e2 KWSys: Fix configure_file call to use COPYONLY, not COPY_ONLY
e9282782 Help: Fix configure_file call to use COPYONLY, not COPY_ONLY
When we explain in add_definitions documentation that it is intended
only for preprocessor definitions, link to add_compile_options for
adding other flags. Also explicitly mention that the order of
add_definitions calls with respect to target creation does not matter.
This differs from the behavior now explicitly stated in the
documentation of add_compile_options.
Explain that it affects only targets added after the call. Fix the link
to the COMPILE_OPTIONS directory propert documentation. Update the
latter to explain that it is used to initialize the corresponding target
property when a target is created.
80b19a71 Help/manual: Avoid long lines in code blocks
4fdacedc Help: Clarify formatting of CPACK_WIX_ACL documentation
35ca4863 Help: Wrap long ctest_submit signature line
58b2d760 Modules: Format documentation to avoid over-long preformatted lines
Update the wording of some examples to avoid long lines in code blocks.
Otherwise the formatted documentation can exceed certain column width
limitations.
Add section headers similar to the 3.0 release notes and move each
individual bullet into an appropriate section. Highlight the new VS
generator capabilities for Windows Phone, Windows Store, and NVIDIA
Nsight Tegra with dedicated subsections.
Move all development release notes into a new version-specific document:
tail -q -n +3 Help/release/dev/* > Help/release/3.1.0.rst
git rm -- Help/release/dev/*
except the sample topic:
git checkout HEAD -- Help/release/dev/0-sample-topic.rst
Reference the new document from the release notes index document.
Add a title and intro sentence to the new document by hand.
631fadea Help: Add notes for topic 'fix-OSX-bundle-rpaths-and-Qt5'
50e261dd OSX: Warn when attempting to change runtime paths on OS X 10.5
9b98fd52 cmake-gui: Make sure we bundle Qt5 Cocoa platform plugin
83a06bb4 BundleUtilities: Framework codesign Resources/Info.plist & Current
f7df82ac BundleUtilities: Resolve & replace @rpath placeholders
14bc686f GetPrerequisites: Make sure dyld placeholders are prefixes
6c313797 BundleUtilities: Use find on UNIX for fast executable lookup
e0e75a72 Help: Add notes for topic 'ctest-memcheck-sanitizers'
7345a1f7 tests: Add a test for ctest_memcheck MemorySanitizer
0c6330da ctest_memcheck: Add support for MemorySanitizer msan
9ba8bf12 tests: add a test for ctest_memcheck UndefinedBehaviorSanitizer
816c100a ctest_memcheck: Add support for UndefinedBehaviorSanitizer ubsan
b67ef537 ctest_memcheck: Order sanitizer type code consistently
f48a2968 Tests: Organize CTestTestMemcheck inner test code
The modern dashboard server is CDash, not Dart, so update the manual
to talk about CTest as a CDash client. Also drop documentation for
a Dart2-specific option.
f25e431d tests: set sanitizer options properly
f0661bf3 tests: fix copy/paste from tsan -> asan comments
ca9cc25c ctest: add support for additional sanitizer options
0b9ffffc ctest: update documentation for CTEST_MEMORYCHECK_TYPE
The FindVTK module only existed to help find_package(VTK) calls work in
old projects written to use "USE_VTK_FILE" instead of "VTK_USE_FILE".
Drop it to allow find_package(VTK) calls to search for VTKConfig.cmake
directly.
The FindITK module only existed to help find_package(ITK) calls work in
old projects written to use "USE_ITK_FILE" instead of "ITK_USE_FILE".
Drop it to allow find_package(ITK) calls to search for ITKConfig.cmake
directly.
df84281d Help: Add notes for topic 'vs-nsight-tegra-generator'
69e198dc VS: Generate Nsight Tegra project revision number
5365c9ac VS: Map Nsight Tegra file types in .vcxproj files
178f56a5 VS: Fix Tegra-Android platform linking of libraries by name
7115702f Tests: Add test for VS Nsight Tegra generator support
a6289499 VS: Generate ANDROID_GUI executables as app packages
c12e4699 Add 'ANDROID_API' target property to set Android Target API
9a4df52a Add 'ANDROID_GUI' target property to mark Android applications
16569abf cmTarget: Track internally whether platform is Android
ef0fd4f0 VS: Teach vcxproj generation about the Tegra-Android platform
d09b60f5 VS: Detect compiler id of Nsight Tegra-Android toolchains
2f071466 VS: Teach VS >= 10 to recognize CMAKE_SYSTEM_NAME 'Android'
Also add a 'CMAKE_ANDROID_GUI' variable to set the property default
so a project can easily make all executables Android applications.
An Android application executable file has the same extension as a
shared library (.so).
When CMAKE_SYSTEM_NAME is 'Android', check for an installation of
'NVIDIA Nsight Tegra Visual Studio Edition' and generate .vcxproj
files for the "Tegra-Android" platform. Also make the installed
version available in a CMAKE_VS_NsightTegra_VERSION variable.
be6a555d Tests: Test setting a generator platform in a toolchain file
d506fee8 Tests: Use -A option to pass generator platform selection
11c9ddd6 ExternalProject: Use -A option to pass generator platform
29bd843e CTest: Use -A option to pass generator platform selection
eb7d8156 cmake: Add -A option to specify a generator platform
858d5a0b Fix if() checks of CMAKE_SYSTEM_NAME on Cygwin
e177e7af FPHSA: Avoid if() dereferencing of quoted variable
425acc52 cmcurl: Use if(DEFINED) to simplify conditions
cede5cbd libarchive: Avoid depending on if() to dereference a quoted variable
2d97178b FindGTK2: Avoid depending on if() to dereference a quoted variable
0b12815d Modules/Test*.cmake: Use if(DEFINED) to simplify conditions
188a1f23 If: Introduce policy CMP0054 - don't dereference quoted variables in if()
b900c1cc If: Extract cmConditionEvaluator from if() implementation
Define the 'cmake -A' option to set CMAKE_GENERATOR_PLATFORM
without having to spell out the whole variable name. We choose
the name '-A' for "platform" because '-P' is already taken, and
in the common use case the "platform" is actually an architecture
(e.g. x64).
Teach the RunCMake test infrastructure to use -A to pass the generator
platform. Extend the RunCMake.GeneratorPlatform test with a case to
verify that the -A option cannot be repeated.
The ctest_configure command already reads the CTEST_CMAKE_GENERATOR
variable to get the value for the cmake -G option. Read new variable
CTEST_CMAKE_GENERATOR_PLATFORM to pass on as CMAKE_GENERATOR_PLATFORM.
The "ctest --build-and-test" mode already has "--build-generator" to
specify the -G option to CMake. Add a "--build-generator-platform" option
to specify a value to pass on as CMAKE_GENERATOR_PLATFORM.
For VS generator names that do not specify the platform name, read
CMAKE_GENERATOR_PLATFORM to get it.
Extend the RunCMake.GeneratorPlatform test with a case covering
use of the x64 platform when the test generator is a Visual Studio
generator whose name does not specify a platform.
Reject the option by default. It will be implemented on a per-generator
basis. Pass the setting into try_compile project generation. Add cache
entry CMAKE_GENERATOR_PLATFORM and associated variable documentation to
hold the value persistently.
Add a RunCMake.GeneratorPlatform test to cover basic use cases for the
option. Verify that CMAKE_GENERATOR_PLATFORM is empty by default, and
that it is rejected when the generator does not support a user setting.
Explain that try_compile calls need to be protected with conditions to
avoid running more than once so that it is easy to isolate a single
try_compile to perform with --debug-trycompile.
39fefde2 VS: Add test case for Windows Phone and Windows Store
89da8465 MSVC: Define 'WIN32' for Windows Store and Windows Phone
ed7f085f Help: Add notes for topic 'vs-windows-apps'
dd11ae8f VS: Do not compile C sources as WinRT (#15100)
b8e40538 VS: Mark Windows Phone and Store targets as App Containers
0432f062 VS: Always ignore ole32 on Windows Phone 8.0
e6ff2f8b VS: Generate Windows Metadata for WinRT components
ee48f4c7 VS: Generate Windows Phone and Windows Store projects as Unicode
cb1aceed VS: Add VS_WINRT_COMPONENT property to enable CompileAsWinRT
401269e4 VS: Handle .pfx files explicitly in generator
23782171 VS: Handle AppxManifest sources explicitly in generator
bc373c6d VS: Set Window Phone/Store app type in CMake-generated targets
d89b2889 VS: Mark CMake-generated targets as Utility in .vcxproj files
03ad8f28 CMakeDetermineCompilerABI: Link with standard libraries on MSVC
The MSVC /ZW flag is valid only for C++ sources. Whenever we enable
CompileAsWinRT for the whole target, disable it for all C sources.
Update the documentation of VS_WINRT_COMPONENT to drop the statement
about undefined behavior for non-C++ sources, because it is now
defined as expected.
cbd1d42b Help: Add notes for topic 'vs-masm'
0f8522a6 VS: Add MASM support to VS 8 and 9 (#8170, #14984)
a43f4400 VS: Move internal MasmEnabled member up to VS 7 generator
df3b007d VS: Add test for MASM support
e8727449 VS: Populate MASM tool build settings in .vcxproj files
0271a5f9 VS: Manually fix MASM flag table entries
1d662e48 VS: Generate MASM flag tables from MSBuild tool files
4f6940df VS: Fix ASM_MASM support in VS >= 10
d7866c52 ASM_MASM: Fix selection of ml64
0374abdb ASM_MASM: Add preprocessor definitions to compile lines
5b0a46e1 ASM_MASM: Do not require compiler to be a full path
802dbe52 cmLocalVisualStudio7Generator: Rename local 'lang' var
Deprecate VS_WINRT_EXTENSIONS and document VS_WINRT_COMPONENT as for VS
generators only. Also define _WINRT_DLL in SHARED libraries in order to
get a .lib produced.
Inspired-by: Paul Annetts <paul@lightunobscured.com>
- autodetects Ice on all major platforms
- allows building with all supported Visual Studio versions on Windows
- autodetects the slice path on most platforms
- separately detects the Ice programs, headers, slice files and
libraries so that any Ice configuration or installation errors can
be accurately reported, making diagnosis of Ice problems simpler
aa21001b Help: Add notes for topic 'vs-special-source-file-properties'
6fe770e1 VS: Add a source file property to set the hlsl shader type
9b4dc2ad VS: Add a source file property to mark content for Windows App deployment
f063a914 VS: Re-arrange WriteExtraSource to support tool configuration
653529ce CTest: Allow / to be in the build name, and be consistent with the build name
39b5df2f ctest_update: Add CTEST_UPDATE_VERSION_ONLY option to only note the version
This allows ctest_update to get the current version without actually
changing the repository. This is useful when using Jenkins or an
external project to update the source to a specific version, but you
still want the current version to show up in CDash.
Copy the CheckCSourceCompiles module and port it to Fortran.
Extend the FortranOnly test to try using the new module.
Suggested-by: Nicolas Bock <nicolasbock@gmail.com>
Create a VS_DEPLOYMENT_CONTENT source file property, supporting
generator expressions, to compute whether a source file should be marked
as DeploymentContent or ExcludedFromBuild in Windows Phone and Windows
Store projects.
Inspired-by: Minmin Gong <minmin.gong@gmail.com>
5d3d9a22 Help: Add notes for topic 'vs-windows-phone-and-store'
401a00d9 VS: Set WindowsPhone and WindowsStore min VS version required
709cebde VS: Generate WindowsPhone and WindowsStore application types
72395ab2 VS: Add .sln "Deploy" mark for WindowsPhone and WindowsStore binaries
2074f581 MSVC: Add system libs for WindowsPhone and WindowsStore
c72f0887 MSVC: Add default WindowsPhone and WindowsStore compile flags
1c94558a MSVC: Disable incremental linking for WindowsPhone and WindowsStore
592098e2 Define 'WINDOWS_PHONE' and 'WINDOWS_STORE' variables
aa42a78f Add WindowsPhone and WindowsStore platform information modules
b94ddf6c CMakeDetermineCompilerId: Recognize WindowsPhone and WindowsStore
d7938bff VS: Select WindowsPhone and WindowsStore default toolsets
3abd150c VS: Save WindowsPhone and WindowsStore system internally
5bf1c5cc Help: Document add_custom_command PRE_BUILD/PRE_LINK for exe/lib only (#15059)
2a58c872 Help: Revise and format 'add_custom_command' docs
cb88742d Help: Remove stray content from 'add_custom_command' docs
State explicitly that the PRE_LINK mode is not for targets created by
the add_custom_target command. The existing wording for PRE_BUILD being
treated as PRE_LINK by non-VS generators will now imply this restriction
for PRE_BUILD too.
Format the reStructuredText markup manually. Organize the command
options into a definition list. Use inline markup to cross-reference
related documents.
Document the COMPILE_DEFINITIONS_<Config> properties as deprecated.
Add new sections for deprecated properties and move POST_INSTALL_SCRIPT
and PRE_INSTALL_SCRIPT there as well.
Previously this generator expression was used internally by the
target_link_libraries command to honor private linking requirements of
static libraries in their INTERFACE_LINK_LIBRARIES. Remove the check
that limits $<LINK_ONLY> to this use case to make it available for
project code to use too.
This reverts commit cfab942e5f.
Since commit v2.8.11~362^2 (Generate an early-return guard in target
Export files, 2012-11-30) an external include guard is not needed.
In the cmake-generator-expressions(7) manual, link to the variables
that correspond to the PLATFORM_ID, C_COMPILER_ID, CXX_COMPILER_ID,
C_COMPILER_VERSION, and CXX_COMPILER_VERSION generator expressions.
Fix cmTarget::GetSourceFiles to set EvaluateForBuildsystem on the
$<TARGET_PROPERTY:...,INTERFACE_SOURCES> generator expression so that
the $<TARGET_OBJECTS> generator expression is allowed within an
INTERFACE_SOURCES value.
Extend the InterfaceLibrary test to cover this case. Extend the
RunCMake.TargetObjects test to cover failure of $<TARGET_OBJECTS>
when used through $<TARGET_PROPERTY:...,INTERFACE_SOURCES> in a
non-buildsystem context.
2c470b77 add_library: Allow arbitrary non-linked sources in OBJECT libraries
de4f3e2c Tests: Fix broken dependency in ObjectLibrary test
54bf5858 Tests: Resolve TODO comment left in ObjectLibrary test
This commit adds support for ThreadSanitizer to ctest. ThreadSanitizer
is part of the clang compiler and also gcc 4.8 and later. You have to
compile the code with special flags. Then your code gets the the
ThreadSanitizer ability built into it. To pass options to the
ThreadSanitizer you use an environment variable. This commit teaches
ctest to parse the output from ThreadSanitizer and send it to CDash.
Loosen this restriction on OBJECT libraries to allow source files of any
name to be generated by custom commands or listed for reference in IDE
projects so long as they would not affect linking of a normal library.
Update the rejection message to be more specific about the looser
restriction.
Extend the ObjectLibrary test to cover a ".cmake" file generated by a
custom command in an OBJECT library.
f0e298ad Help: Add notes for topic 'vs14-generator'
5c105140 Tests: Simplify LoadCommand tests
b1cbd577 FindBoost: Add -vc140 mangling for VS 14
bdc7d9c8 VS14: Fix Cl and Link flag tables as previous versions
d96b3f68 VS14: Generate flag tables from MSBuild v140 tool files
65624c39 VS14: Add Visual Studio 14 generator (#14982)
8635ac23 Tests/Preprocess: Remove unnecessary VS version tests
Call the generator "Visual Studio 14" without any year because this
version of VS does not provide a year in the product name.
Copy cmGlobalVisualStudio12Generator to cmGlobalVisualStudio14Generator
and update version numbers accordingly. Add the VS14 enumeration value.
Teach the platform module Windows-MSVC to set MSVC14 and document the
variable. Teach module InstallRequiredSystemLibraries to look for the VS
14 runtime libraries.
Teach tests CheckCompilerRelatedVariables, VSExternalInclude, and
RunCMake.GeneratorToolset to treat VS 14 as they do VS 10, 11, and 12.
Co-Author: Pawel Stopinski <diokhan@go2.pl>
Installing large directories, e.g., the output of a doxygen run, prints
one line per file resulting in too much noise in the build output. Add
an option to the install(DIRECTORY) command to not print anything upon
make install.
Extend the RunCMake.install test with cases covering MESSAGE_NEVER
behavior of the install(DIRECTORY) command.
Suggested-by: Stefan Eilemann <Stefan.Eilemann@epfl.ch>
Create a variable to allow users to control which installation
messages are printed. In particular, provide a "LAZY" setting
that prints "Installing" messages but not "Up-to-date" messages.
This is desirable for incremental re-installations.
Suggested-by: J Decker <d3ck0r@gmail.com>
Extend the cmake command-line interface to support
cmake -E env [--unset=NAME]... [NAME=VALUE]... COMMAND [ARG]...
This will be useful to run processes with modified environments
without using a shell or a full "cmake -P" script to wrap it.
Extend the RunCMake.CommandLine test to cover success and failure cases.
Inspired-by: Jonathan Bohren <jbo@jhu.edu>
f0a0f3dc WCDH: Fix compiler id test for compatibility macros.
627ad96b Project: Detect other compilers before detecting Clang.
bc950169 WCDH: Remove noise from generated defines.
eecd93fc Features: Escape the COMPILE_OPTIONS for dialects.
The DECL part is redundant, and the language part is not needed. The
source language and context already determines the language, so there
is no need to repeat it in the define name.
The add_library(INTERFACE) and Interface Libraries documentation
list all the INTERFACE_* properties and target_* commands that
can be used to define the interface. Add INTERFACE_SOURCES
and target_sources() to these lists for completeness.
7eef823e Help: Add comma to assist parsing of ctest_build command docs.
5fb9b16d Help: Document that file(GENERATE) re-writes only when needed.
95135ac3 Help: Add missing external link marker.
Delay use of CMAKE_GENERATOR_TOOLSET until the CMakeSystem.cmake
file has been configured and loaded during the first project() or
enable_language() command. This gives the toolchain file named by
CMAKE_TOOLCHAIN_FILE a chance to set CMAKE_GENERATOR_TOOLSET. This
point is still early enough to set the generator toolset prior to
the initialization of any languages that might use the toolset.
The cmake::GeneratorToolset member variable remains an indication
of what was specified by the -T option or loaded from the cache.
It does not need to be updated based on the toolchain file setting.
The cmMakefile::TryCompile can still pass cmake::GeneratorToolset
into the inner instance because the try-compiled project will do
platform and language initialization using the CMakeSystem module
configured for the outer project.
Extend the RunCMake.GeneratorToolset test with cases that use a
toolchain file to set CMAKE_GENERATOR_TOOLSET.
Add support for Cobertura coverage files written by Java.
Add a test which uses the report from a Java run of Cobertura to calculate coverage.
In the documentation of CTEST_COVERAGE_COMMAND, give a sample .sh file to merge
the Cobertura .ser files and generate the XML report from the merged file.
In the ctest(1) manual and ctest_start() command documentation, convert
mentions of CTest Script variables to cross-references so they will be
rendered as links.
Explicitly specify the sequence of underline characters we use in the
CMake documentation. It is the same sequence as that suggested in the
Sphinx documentation, but we have our own descriptions.
This is the convention suggested in the Sphinx documentation and is
already used in several other places in the CMake documentation.
Update a few places where we were using other characters.
Explain how to use $<BUILD_INTERFACE> and $<INSTALL_INTERFACE> directly
in the documentation of the target_include_directories command and
INTERFACE_INCLUDE_DIRECTORIES target property. Otherwise readers need
to notice the link to the cmake-buildsystem(7) manual and find the
example in that to understand the need for these expressions.
Also fix the explanation in cmake-buildsystem(7) to not claim that
relative paths may be used inside a BUILD_INTERFACE expression.
Brad King
James Bigler
Stephen Kelly
Gregor Jasny
Bill Hoffman
Stanislav Ionascu
Domen Vrankar
Raffi Enficiaud
Gaëtan Lehmann
Nils Gladitz
Johan Andruejol
Daniele E. Domenichelli
Zack Galbreath
Nicolas Bock
Robert Maynard
Robert Goulet
Justin Borodinsky
Sylvain Joubert
Matt McCormick
Ben Boeckel
William Lynch
Clinton Stimpson
Christoph Grüninger
Tim Blechmann
Dmitry Polyanitsa
Kelly Thompson
Ruslan Baratov
Gilles Khouzam
Cedric Perthuis
David Demelier
Hannes Mezger
Christopher Dembia
Christoph Grüninger
Peter Collingbourne
Roger Leigh
Iosif Neitzke
Pascal Bach
Andrew Bauer
Alan W. Irwin
Roger Leigh
Daniel Pfeifer
Konstantin Podsvirov
Joseph Snyder