Add 'deprecated' warning options type, to allow setting
CMAKE_WARN_DEPRECATED via the -W '-Wdeprecated' and
'-Wno-deprecated' options.
Add tests for new options and updated documentation.
Refactor the -Wdev and -Wno-dev options parser to use a generic -W
parser that follows the GCC pattern, excluding support for
-Werror=TYPE and -Wno-error=TYPE formats for now.
Explicitly enable author warnings by default, via the
cmake::GetSuppressDevWarnings method, which signals suppression
is turned off unless the CMake variables are set as required.
Add test cases for author and deprecated messages displayed by
default.
Make the message suppression more consistent, by adding a check
for the message related CMake variables in cmake::IssueMessage,
which allows callers of IssueMessage other than the message
command to behave as expected. Also added a check for
CMAKE_SUPPRESS_DEVELOPER_WARNINGS in the message command to
mirror the deprecated message type behaviour.
Added a 'force' flag to the cmake::IssueMessage method, to
make the message suppression consistent, when setting the
message related CMake variables directly in a CMake file.
Expand message command tests to cover the AUTHOR_WARNING message
type as well.
The -T parameter to CMake may now be specified through cmake-gui via a
new text field in the first-time configure wizard (below the generator
chooser).
The generator factories specify whether or not they support toolsets.
This information is propagated to the Qt code and used to determine if
the selected generator should also display the optional Toolset widgets.
The cmMakefile should get a fully prepared snapshot and not clobber its
definitions. It should eventually be able to process list files from any
starting-point snapshot, though that is some refactoring away still.
The changes in commit c96fe0b4 (cmake: Add -W options to control
deprecation warnings and errors, 2015-07-28) fail to account for
-Wdev warnings produced by places in CMake other than message().
This causes a regression in which -Wno-dev fails to suppress such
warnings. Revert the feature until it can be revised accordingly.
heaptrack showed a 1 byte allocation with the backtrace pointing
here, as is the case since commit v3.3.0-rc1~112^2~5 (cmPolicies:
Remove unused cmPolicy class., 2015-05-03)
The logic in commit c96fe0b4 (cmake: Add -W options to control
deprecation warnings and errors, 2015-07-28) accidentally enables
errors on warnings by default in scripts because there is no
initialization of CMAKE_SUPPRESS_DEVELOPER_ERRORS to TRUE.
Rename internal CMAKE_SUPPRESS_DEVELOPER_ERRORS cache entry to
CMAKE_ERROR_DEVELOPER_WARNINGS. Fix the logic in the message() command
to treat AUTHOR_WARNING as an error only if the option is explicitly
enabled.
Refactor the -Wdev and -Wno-dev to use a generic -W parser that follows
the GCC pattern. Include support for setting CMAKE_ERROR_DEPRECATED and
CMAKE_WARN_DEPRECATED via the deprecated warning. Add -Werror=dev and
-Wno-error=dev options so that dev warning options are in line with
deprecated warning options. Use a new CMAKE_SUPPRESS_DEVELOPER_ERRORS
internal cache entry to store the above new dev options persistently.
Add tests for new options and updated cmake documentation and release
notes to list new options.
57f03e59 Port some of the cmExportFileGenerator API to cmGeneratorTarget.
57ab0f70 Port cmExportBuildFileGenerator to cmGeneratorTarget.
570938cb cmExportTryCompileFileGenerator: Create cmGeneratorTargets.
ec38e4c8 Move GetFullPath to cmGeneratorTarget
dfb025bf Move GetLocationForBuild to cmGeneratorTarget.
9f2dca80 Move GetLocation to cmGeneratorTarget.
c7a8e74b Always access target location from a cmGeneratorTarget instance.
5b60eaf6 cmTarget: Restore the ImportedGetLocation method.
50b17a61 cmIncludeCommand: Populate the cmGeneratorTargets in deprecated path.
ba266858 cmTarget: Create cmGeneratorTargets before reading deprecated LOCATION.
5ab3a946 cmTarget: Inline GetLocation into deprecated callers.
496f4cd0 cmGlobalGenerator: Create cmGeneratorTargets before QtAutomoc.
de80993a cmGlobalGenerator: Create cmGeneratorTargets earlier.
611220f7 cmTarget: Use reliable test for CMP0024 and CMP0026 OLD.
bbad6ba5 cmLocalGenerator: Remove unused AddCustomCommandToCreateObject method.
e4dc83ad cmLocalGenerator: Remove unused AddBuildTargetRule method.
...
The --trace option is helpful, but sometimes, what you're looking for is
deep under many layers of function calls and figuring out what instance
of the function call you're looking at is tedious to determine (usually
involving patching and message()). Instead, add a --trace-expand option
to trace while expanding commands into what CMake actually sees.
Since commit v2.4.0~4158 (When the initially configured generator is
invalid, allow the user to change the generator without deleting the cache
by hand, 2003-05-13) we remove CMAKE_GENERATOR from the cache if an error
occurs and CMAKE_MAKE_PROGRAM is not cached. This worked at the time
because all generators initialized the CMAKE_MAKE_PROGRAM cache entry.
Since commit v3.0.0-rc1~260^2~4 (VS: Switch to internal CMAKE_MAKE_PROGRAM
lookup by generators, 2013-11-15) and commit v3.2.0-rc1~39^2 (Xcode:
Switch to internal CMAKE_MAKE_PROGRAM lookup by generator, 2015-01-28) the
VS and Xcode generators no longer store CMAKE_MAKE_PROGRAM in the cache.
Therefore any error during generation would wipe out CMAKE_GENERATOR from
the cache and cause the next configuration to choose a default generator.
Simply drop the behavior introduced by the original commit and always
preserve CMAKE_GENERATOR. Since the time that behavior was introduced a
lot more state is now saved in CMakeCache.txt and CMakeFiles/ during the
initial configuration so it is not safe to change generators without
starting fresh anyway.
The test for this variable was removed in commit v2.8.8~330^2~7 (complex:
Remove ancient unused ComplexRelativePaths test, 2011-12-23).
Commit v3.1.0-rc1~425^2~2 (backtrace: Convert to local paths in
IssueMessage, 2014-03-12) appears to have accidentally made some backtraces
print relative paths with the variable because conversions which used to be
done at configure time, before the variable had an effect are now potentially
done at generate time.
The documentation of the variable says not to use it, and the docs are wrong in
that the variable actually applies in per-directory scope.
The read of the variable makes it harder to split conversion methods from
cmLocalGenerator where they don't belong. Remove it now.
Currently cmMakefile calls MakeRelative on a copy of the backtrace,
emits the copy to the stream once, then discards the copy. There
is no need to have API for the path conversion.
Don't create a snapshot in Initialize(), but leave the creation
responsibility to the cmake instance instead. Previously, the
cmState would Initialize() in its constructor, and the cmake instance
would re-Initialize() during Configure(). The end result was the
same and there would be one snapshot present. However, cmLocalGenerator
also created a snapshot on construction, and that one was used, leaving
the first snapshot unused, and potential for off-by-one errors.
Fix that by making the cmLocalGenerator use the existing snapshot
if it is top-level. Add a CurrentSnapshot to the cmake instance and
populated it while configuring a directory. This will eventually
replace the 'current local generator' concept. Fix the GetParent
implementation to be able to return the first snapshot.
This reverts commit f85db2f323.
Discussion by the QtCreator community at
https://bugreports.qt.io/browse/QTCREATORBUG-13695
raises concerns about this particular approach to working with CMake
projects using QtCreator. Also, the functionality and design of the QBS
extra generator was never discussed on the CMake mailing list or with
QtCreator developers. There may be better ways to make the two tools
work together.
In order to avoid committing to long-term support of this generator
prior to such discussion taking place, revert it from CMake for now.
We may restore this or use an alternative design based on results of
such discussion.
fa9eb814 cmLocalGenerator: Remove redundant path access.
1933f3d1 cmLocalGenerator: Remove redundant path conversions.
9e4b6cc2 cmState: Store computed relative paths to to current directories.
991f5e49 cmState::Snapshot: Store components for current directories.
57bdc1a2 cmState: Compute and store directory components.
61d52e6e cmListFileBacktrace: Hide the context-stack implementation detail.
a271f7f1 cmTarget: Simplify CMP0023 message loop.
f4300cd4 cmTarget: Simplify output computation.
65a42849 cmTarget: Store context in stack only if different.
9645cba3 cmListFileContext: Implement EqualityComparable.
52a8d19c cmTarget: Store only cmListFileContext for CMP0023 handling.
59ba1215 cmTarget: Remove needless iteration.
18f810a8 cmListFileContext: Sort by line before file.
e96b5d14 cmListFileContext: Implement LessThanComparable.
7eb0dfa0 cmMakefile: Use std::set::insert API to simplify CMP0054 handling.
f9785e0c cmMakefile: Simplify CMP0054 handling.
e17b5e42 cmMakefile: Add access to the top-level execution context.
1ec1bf9f if(): Test the effect of cmMakefileCall use in elseif() handling.
9b4aefad cmMakefile: Replace deques with vectors.
The backtrace will soon not be implemented in terms of a stack of
cmListFileContext objects. Keep the cmListFileContext in the API
for convenience for now.
There is no need to duplicate these in all cmLocalGenerators.
Rename the symbols according to current conventions.
Add explicit calls to Set{Source,Binary}Directory with empty strings
in order to trigger the population of the components containers with
the current working directory in cmLocalGenerator. Having
directories set to empty is a special case in CMake, which is relied
on for the `if(CMAKE_BINARY_DIR)` condition at the end of
CMakeDetermineSystem.cmake.
They are maintained as containing the same content as the 'home'
directories, but they are never read from.
Fix some comments and help strings which confused the two by
name. They actually mean what is called CMAKE_SOURCE_DIR in
cmake code.
66b641f4 Help: Add notes for topic 'add-GreenHills-MULTI-generator'
48004d9d Add a 'Green Hills MULTI' generator on Windows
051d8be1 cmLocalGenerator: Constify some cmTarget and cmGeneratorTarget arguments
Green Hills MULTI is an IDE for embedded real-time systems. The IDE's
product page can be found here:
http://www.ghs.com/products/MULTI_IDE.html
It supports cross compiling on ARM, Intel x86, and other architectures
with various operating systems. The IDE exists on Linux and Windows
host systems, but CMake will currently only generate the project files
on Windows host systems.
Global properties are already global in scope, so remove the
overload for specifying it and port users of the API.
The call from cmMakefile::GetProperty can be simplified because
the scope is only used during chaining, and there is no further
chaining after processing global properties.
At this point, it is an interface to the cache. It will be extended
to be a universal interface for access to and manipulation of
configuration-time data (defintions, properties on targets,
directories, source files etc).
This will allow porting all command implementations away
from the cmMakefile and cmTarget classes, and result in something
more-purely related to configuration-time processing of cmake
commands. That should serve at least the following goals:
* Split the CMake implementation more definitively into three
stages: Configuration, computation and generation, and be able to
implement each optimally for memory access patterns etc.
* Make better IDE integration possible by making more configuration
data available.
* Make it possiblte to use a smaller library than CMakeLib.a in
cpack and ctest, resulting in smaller executables.
* Make it possible to run the configure step multiple times in
the same CMake run (#14539).
Manage its lifetime in the cmake class, and add a convenience accessor
to cmMakefile.
07d44d63 cmake: Remove confusing duplication.
ea819b29 cmMakefile: Remove unused method.
6ad86c7f cmMakefile: Remove bad comment.
fca2b542 cmMakefile: Internalize setting of CMakeInstance on Properties.
7bb4e3db cmMakefile: Out-of-line Home directory accessors.
6241253a cmake: Out-of-line Home and Start directory methods.
0ee3ccb3 cmake: Fix variable name bugs.
57dd094e Use vector, not list for cmCommand storage.
6deb43e6 Remove some files which do not need to be in BootstrapCommands.
ecdb1b3b Add some missing includes.
04b307b9 cmake: Simplify CommandExists method.
0f1f324b cmake: Rename oddly named variables.
275185ac cmake: Constify GetCommand method.
c57f086a cmake: Don't lower-case a string needlessly.
23368c9b cmake: Use make_pair instead of Foo::value_type.
14c70b8c cmake: out-of-line try compile state methods.
...
Michael Scott
Robert Dailey
Stephen Kelly
Brad King
Clinton Stimpson
Ben Boeckel
Geoff Viola