708d1cf1ee
ENH: Support more preprocessor values in VS6
...
Previously we rejected all preprocessor definition values containing
spaces for the VS6 IDE generator. In fact VS6 does support spaces but
not in combination with '"', '$', or ';', and only if we use the sytnax
'-DNAME="value with spaces"' instead of '-D"NAME=value with spaces"'.
Now we support all definition values that do not have one of these
invalid pairs. See issue #8779 .
2009-04-24 11:18:06 -04:00
f6828c391d
BUG: Fix invalid array access discovered during investigation of issue #7832 .
2009-04-07 15:13:07 -04:00
b59d0a4d13
BUG: Allow more shell ops in custom commands
...
This extends the set of common shell operators to include "||", "&&",
"1>", and "2>". See issue #6868 .
2009-03-17 15:11:33 -04:00
66d69f864a
ENH: Refactor generation of CTestTestfile content
...
This moves code which generates ADD_TEST and SET_TESTS_PROPERTIES calls
into CTestTestfile.cmake files out of cmLocalGenerator and into a
cmTestGenerator class. This will allow more advanced generation without
cluttering cmLocalGenerator. The cmTestGenerator class derives from
cmScriptGenerator to get support for per-configuration script
generation (not yet enabled).
2009-03-16 10:40:46 -04:00
98c51ff6dc
ENH: Overhaul CMake version numbering
...
This moves the version numbers into an isolated configured header so
that not all of CMake needs to rebuild when the version changes.
Previously we had spaces, dashes and/or the word 'patch' randomly chosen
before the patch number. Now we always report version numbers in the
traditional format "<major>.<minor>.<patch>[-rc<rc>]".
We still use odd minor numbers for development versions. Now we also
use the CCYYMMDD date as the patch number of development versions, thus
allowing tests for exact CMake versions.
2009-03-05 15:17:07 -05:00
8c3290b4a3
BUG: Use new include dir suppresson for all gens
...
This fixes CMAKE_<LANG>_IMPLICIT_INCLUDE_DIRECTORIES to be used for all
generators instead of just those that construct their own compiler
command lines directly. See issue #8598 .
2009-02-26 09:16:16 -05:00
3498a8c668
ENH: Simplify reverse cmLocalGenerator::Convert
...
It does not make sense to call the reverse Convert signature (for remote
paths corresponding to CMake-managed directories) with NONE or FULL
since they have no path. Patch from Modestas Vainius. See issue #7779 .
2009-02-26 08:49:10 -05:00
cb788e8f6d
ENH: Re-enable system include dir suppression
...
This creates variable CMAKE_<LANG>_IMPLICIT_INCLUDE_DIRECTORIES to
specify implicit include directories on a per-language basis. This
replaces the previous platform-wide variable. It is necessary to
avoid explicit specification of -I/usr/include on some compilers
(such as HP aCC) because:
1.) It may break ordering among system include directories defined
internally by the compiler, thus getting wrong system headers.
2.) It tells the compiler to treat the system include directory
as a user include directory, enabling warnings in the headers.
See issue #8598 .
2009-02-25 11:44:46 -05:00
39f8b91125
BUG: Remove implicit include dir suppression
...
We used to suppress generation of -I/usr/include (and on OSX also
-I/usr/local/include). This behavior seems to cause more trouble than
it's worth, so I'm removing it until someone encounters the original
problem it fixed. See issue #8598 .
2009-02-24 15:37:09 -05:00
15c52e9891
ENH: Add rule substitutions useful for launchers
...
This defines make rule substitutions <LANGUAGE>, <TARGET_NAME>,
<TARGET_TYPE>, and <OUTPUT>. They will be useful for RULE_LAUNCH_*
property values.
2009-02-10 08:52:07 -05:00
b604b98c56
ENH: Define RULE_LAUNCH_* properties
...
This defines global, directory, and target properties
RULE_LAUNCH_COMPILE, RULE_LAUNCH_LINK, and RULE_LAUNCH_CUSTOM. Their
values specify 'launcher' command lines which are prefixed to compile,
link, and custom build rules by Makefile generators.
2009-02-10 08:51:15 -05:00
a27e9ca4a2
BUG: Fix old-style install to prefix top
...
The old install_files, install_programs, and install_targets commands
used to permit installation to the top of the prefix by specifying
destination '/'. This was broken in 2.6.0 to 2.6.2 by changes to
enforce valid destinations that did not account for this case. This
change fixes the case by converting the install destination to '.' which
is the new-style way to specify the top of the installation prefix.
2009-02-04 10:34:10 -05:00
1dee719cdc
BUG: Fix issue #6195 . Add CMAKE_OSX_DEPLOYMENT_TARGET cache variable to specify the target deployment runtime OS version of the built executables on Mac OSX. Thanks to Mike Jackson for the patch.
2009-01-27 10:30:55 -05:00
205fce61b6
ENH: Warn if build dir is too long for filesystem
...
When an object file directory is too deep to place an object file
without exceeding CMAKE_OBJECT_PATH_MAX, this issues a warning.
Previously we silently ignored the problem. See issue #7860 .
2008-12-16 09:15:18 -05:00
3cf9265fa7
ENH: Refactor passing of max length object dir
...
When computing the maximum length full path to the build directory under
which object files will be placed, pass the actual path instead of just
its length. This will be useful for error message generation.
2008-12-16 09:14:40 -05:00
ad44a41a18
ENH: Fix optional use of relative paths.
...
These changes refactor cmLocalGenerator methods Convert and
ConvertToOutputForExisting to support references inside the build tree
using relative paths. After this commit, all tests pass with Makefile
generators when relative paths are enabled by default. See issue #7779 .
2008-10-09 15:30:07 -04:00
8bffd5af36
ENH: Simplify framework -F flag generation
...
This removes an unnecessary use of ConvertToOutputForExisting which is
needed only on Windows to consider short-pathing.
2008-10-09 15:07:35 -04:00
f89dae7a94
ENH: Create Info.plist files in OS X Frameworks
...
A Mac OS X Framework should provide a Resources/Info.plist file
containing meta-data about the framework. This change generates a
default Info.plist for frameworks and provides an interface for users to
customize it.
2008-09-02 12:06:32 -04:00
990c6b0b90
ENH: Allow custom limit on object file path length
...
Some native build tools, particularly those for cross compiling, may
have a limit on the length of the full path to an object file name that
is lower than the platform otherwise supports. This change allows the
limit to be set by the project toolchain file through the variable
CMAKE_OBJECT_PATH_MAX.
2008-08-21 09:54:36 -04:00
061d20be38
ENH: Add UNKNOWN type for IMPORTED libraries
...
When creating an IMPORTED target for a library that has been found on
disk, it may not be known whether the library is STATIC or SHARED.
However, the library may still be linked using the file found from disk.
Use of an IMPORTED target is still important to allow per-configuration
files to be specified for the library.
This change creates an UNKNOWN type for IMPORTED library targets. The
IMPORTED_LOCATION property (and its per-config equivalents) specifies
the location of the library. CMake makes no assumptions about the
library that cannot be inferred from the file on disk. This will help
projects and find-modules import targets found on disk or specified by
the user.
2008-08-18 11:39:22 -04:00
0bf093fd17
STYLE: Convert unused target type cases to default
...
In switch statements that deal with only a few target types, use a
'default' case for the remaining target types instead of listing them
explicitly. This will make it easier to add more types in the future.
2008-08-18 11:26:51 -04:00
7e11c5e928
BUG: Custom command depends may match sources
...
Custom command dependencies that are not full paths or targets may also
match source files. When one does, the full information about the
source file's location and name may be used. This fixes the case when a
custom commands depends by relative path on a source file generated by
another custom command specifying its output by relative path.
2008-08-05 13:27:06 -04:00
d35b5a2fb1
BUG: Do not convert RPATH entries to full path.
...
When generating RPATH entries on the link line using a repeated linker
flag (-R ... -R ... style) do not convert individual entries to a full
path. We need to preserve what the user requested.
2008-08-05 09:55:08 -04:00
e44a9c9299
BUG: Fix escaping in link scripts
...
When generating escape sequences for the native build tool do not put in
Makefile escapes for paths generated into link scripts. This fixes
putting "$ORIGIN" into the RPATH, and probably some other subtle
problems.
2008-08-05 09:55:02 -04:00
d6f02cd911
BUG: fix for bug 7421, fortran did not get arch flags on the mac
2008-07-30 10:44:57 -04:00
1d1d874cf1
COMP: fix compiler warning and follow style
2008-07-22 13:32:43 -04:00
c1b8ad4e1d
ENH: Allow users to specify a custom Info.plist template
...
- Create MACOSX_BUNDLE_INFO_PLIST target property to specify template.
- Look for MacOSXBundleInfo.plist.in in CMAKE_MODULE_PATH by default.
- See issue #6983 .
2008-05-17 12:53:56 -04:00
10c91ded4f
ENH: add support for Intel Fortran Visual studio IDE
2008-04-30 13:26:04 -04:00
c7d84b21c6
BUG: Do not escape shell operators when generating command lines.
...
- See bug#6868.
- Update CustomCommand test to check.
2008-04-29 15:34:49 -04:00
2421c11a98
BUG: move this back out of the if statemtn
2008-04-29 12:10:47 -04:00
d4fdbeed64
ENH: allow users to set sysroot
2008-04-28 13:53:14 -04:00
30630137f5
ENH: fix for the correct path to cmake
2008-03-28 15:54:20 -04:00
73df9a5cd4
ENH: change CMP_ to CMP
2008-03-13 11:38:46 -04:00
5233b75a77
ENH: Improve handling of old-style compatibility.
...
- Remove CMP_0001 (no slash in target name) and restore
old CMAKE_BACKWARDS_COMPATIBILITY check for it
- Replace all checks of CMAKE_BACKWARDS_COMPATIBILITY
with cmLocalGenerator::NeedBackwardsCompatibility calls
- Create new CMP_0001 to determine whether or not
CMAKE_BACKWARDS_COMPATIBILITY is used.
(old = use, new = ignore)
- Show CMAKE_BACKWARDS_COMPATIBILITY in cache only when
CMP_0001 is set to OLD or WARN
- Update documentation of cmake_policy and cmake_minimum_required
to indicate their relationship and the 2.4 version boundary
- When no cmake policy version is set in top level makefile
implicitly call cmake_policy(VERSION 2.4) which restores
CMAKE_BACKWARDS_COMPATIBILITY and other 2.4 compatibility
- Fix tests MakeClean and Preprocess to call
cmake_policy(VERSION 2.6) because they depend on new policies
2008-03-07 15:30:35 -05:00
d732de4a8a
ENH: Cleanup builtin chrpath support
...
- Move computation of extended build-tree rpath
to cmComputeLinkInformation
- Only enable the extended build-tree rpath if
the target will be installed
- Generalize the interface of file(CHRPATH)
- When changing the rpath on installation only
replace the part generated by CMake because
the native tools (ex SunCC on Linux) might have
added their own part to the rpath
2008-03-02 14:35:23 -05:00
230c8972f7
BUG: Do not place $(CMAKE_COMMAND) in link scripts.
2008-03-01 09:08:34 -05:00
67f8c0fd10
ENH: Allow multiple OS X applications bundles to be created in a single build directory. Converted Info.plist files to be generated directly instead of configured with make variables. The MACOSX_BUNDLE_* variables are now properties (and vars for compatibility).
2008-02-14 15:31:08 -05:00
82fcaebe28
ENH: Pass dependent library search path to linker on some platforms.
...
- Move runtime path ordering out of cmComputeLinkInformation
into its own class cmOrderRuntimeDirectories.
- Create an instance of cmOrderRuntimeDirectories for runtime
path ordering and another instance for dependent library
path ordering.
- Replace CMAKE_DEPENDENT_SHARED_LIBRARY_MODE with explicit
CMAKE_LINK_DEPENDENT_LIBRARY_FILES boolean.
- Create CMAKE_LINK_DEPENDENT_LIBRARY_DIRS boolean.
- Create variables to specify -rpath-link flags:
CMAKE_SHARED_LIBRARY_RPATH_LINK_<LANG>_FLAG
CMAKE_EXECUTABLE_RPATH_LINK_<LANG>_FLAG
- Enable -rpath-link flag on Linux and QNX.
- Documentation and error message updates
2008-02-01 08:56:00 -05:00
52b3f85642
ENH: Enable use of link script whenever incremental archive construction rules are available. Enable use of archive construction rules on MSYS.
2008-01-29 21:16:49 -05:00
ffac622a85
ENH: Add cmTarget::GetLinkInformation method to allow several places in the generators to share link information while only computing it once per configuration for a target. Use it to simplify the chrpath feature.
2008-01-29 15:07:33 -05:00
5594ad4885
ENH: Updated exporting and importing of targets to support libraries and configurations.
...
- Created cmExportFileGenerator hierarchy to implement export file generation
- Installed exports use per-config import files loaded by a central one.
- Include soname of shared libraries in import information
- Renamed PREFIX to NAMESPACE in INSTALL(EXPORT) and EXPORT() commands
- Move addition of CMAKE_INSTALL_PREFIX to destinations to install generators
- Import files compute the installation prefix relative to their location when loaded
- Add mapping of importer configurations to importee configurations
- Rename IMPORT targets to IMPORTED targets to distinguish from windows import libraries
- Scope IMPORTED targets within directories to isolate them
- Place all properties created by import files in the IMPORTED namespace
- Document INSTALL(EXPORT) and EXPORT() commands.
- Document IMPORTED signature of add_executable and add_library
- Enable finding of imported targets in cmComputeLinkDepends
2008-01-28 08:38:36 -05:00
09af624dee
BUG: Fix generation of Watcom link lines.
...
- Work-around bug in Watcom command line parsing for spaces in paths.
- Add 'library' option before libraries specified by file path.
2008-01-23 13:30:55 -05:00
865c2bc6d6
BUG: Work-around bug in MSVC 6 command line parsing.
2008-01-23 13:03:03 -05:00
96fd5909d9
ENH: Implement linking with paths to library files instead of -L and -l separation. See bug #3832
...
- This is purely an implementation improvement. No interface has changed.
- Create cmComputeLinkInformation class
- Move and re-implement logic from:
cmLocalGenerator::ComputeLinkInformation
cmOrderLinkDirectories
- Link libraries to targets with their full path (if it is known)
- Dirs specified with link_directories command still added with -L
- Make link type specific to library names without paths
(name libfoo.a without path becomes -Wl,-Bstatic -lfoo)
- Make directory ordering specific to a runtime path computation feature
(look for conflicting SONAMEs instead of library names)
- Implement proper rpath support on HP-UX and AIX.
2008-01-22 09:13:04 -05:00
c3ab83150c
ENH: improve backwards compatibility
2008-01-19 15:09:36 -05:00
7c473d4828
BUG: fix bugs 5539 (progress going beyond 100% when new files are added) and 5889 (tests are not found in some cases when using add_subdirectory to .. etc)
2008-01-18 10:25:25 -05:00
8d1d5500c8
ENH: Enable use of COMPILE_DEFINITIONS property for Fortran sources.
2008-01-17 19:58:01 -05:00
433099ecdd
ENH: Converted cmMakefile DefineFlags added by ADD_DEFINITIONS command into a COMPILE_DEFINITIONS directory property.
2008-01-17 19:29:43 -05:00
456631225b
ENH: use CTestTestfile.txt
2008-01-17 12:44:59 -05:00
18b9e7db6c
ENH: Enable CMAKE_<lang>_DEFINE_FLAG for COMPILE_DEFINITIONS property implementation.
2008-01-17 10:00:19 -05:00
8262ccfd4e
ENH: Create COMPILE_DEFINITIONS property for targets and source files. Create <config>_COMPILE_DEFINITIONS property as per-configuration version. Add Preprocess test to test the feature. Document limitations on Xcode and VS6 generators.
2008-01-14 09:20:58 -05:00
340468a090
BUG: Removed stray debugging statement.
2008-01-13 16:59:09 -05:00
857e2e15dd
ENH: Improved escaping in kwsys/System. Added escape of % for NMake. Added escape of ; for the VS IDE.
2008-01-13 16:36:20 -05:00
ee886fbbdb
ENH: add CMAKE_DEFINE_FLAG_(LANG) that can replace -D flags with what the compiler actually uses
2008-01-11 13:00:29 -05:00
52eb0ccac7
BUG: Restore old interface of "make foo.o" and "make foo.i" even though object file names now include source extensions. For Java we also need to always remove the source extension (.java -> .class). This fixes the re-opening of bug #6169 .
2008-01-07 16:12:37 -05:00
3efc6e40cb
BUG: Do not remove the source file extension when computing an object file name. This addresses bug #6169 . If CMAKE_BACKWARDS_COMPATIBILITY is 2.4 or lower maintain the old behavior so that existing build trees and old project releases are not affected.
2007-12-28 23:07:26 -05:00
f872c10b7e
ENH: Added method cmLocalGenerator::GetBackwardsCompatibility to reduce parsing of CMAKE_BACKWARDS_COMPATIBILITY variable. Add cmLocalGenerator::NeedBackwardsCompatibility to simplify checks for compatibility requirements.
2007-12-28 23:07:14 -05:00
850721f9af
COMP: Fixed data loss warning.
2007-12-20 09:27:59 -05:00
ac017f7aba
STYLE: fix warnings: comparison signed/unsigned, unused variable
...
Alex
2007-12-19 03:56:13 -05:00
3ae731fab7
ENH: add support for chrpath, so the RPATH in ELF files can be changed when
...
installing without having to link the target again -> can save a lot of time
chrpath is handled very similar to install_name_tool on the mac. If the
RPATH in the build tree file is to short, it is padded using the separator
character.
This is currently disabled by default, it can be enabled using the option
CMAKE_USE_CHRPATH. There are additional checks whether it is safe to enable
it. I will rework them and use FILE(READ) instead to detect whether the
binaries are actually ELF files.
chrpath is available here
http://www.tux.org/pub/X-Windows/ftp.hungry.com/chrpath/
or kde svn (since a few days): http://websvn.kde.org/trunk/kdesupport/chrpath/
Alex
2007-12-18 17:50:27 -05:00
f2bb0af819
STYLE: restructure OutputLinkLibraries() a bit, so that new there is a
...
function which returns the RPATH, so e.g. the install rpath can be queried
when the command for the build rpath is created. This is a first step for
supporting chrpath.
Alex
2007-11-26 17:57:39 -05:00
5765fbbb88
ENH: fix spelling error
2007-10-22 14:01:49 -04:00
613c35e033
ENH: do not always add -arch flags
2007-10-19 22:24:00 -04:00
c8e832dcf5
BUG: Fix #5868 - add COMPONENT handling to the SCRIPT and CODE signatures of the INSTALL command.
2007-10-15 07:08:15 -04:00
79d9041d81
BUG: fix for bug 0003618 , allow one arch in OSX_ARCHS to work
2007-10-12 10:58:59 -04:00
c3b42e90ed
ENH: add flag so a terminating slash for the link path can be specified (needed by the Digital Mars D compiler)
...
Alex
2007-08-28 16:19:01 -04:00
7ff741f14d
STYLE: more space in the cmake_install.cmake script (easier to read)
...
Alex
2007-08-21 16:22:55 -04:00
ea874415d9
ENH: Moved GetTargetDirectory method up to cmLocalGenerator. This provides a common interface to something that was implemented in most local generators anyway.
2007-08-01 15:25:40 -04:00
ee91e25499
BUG: Only pay attention to the FRAMEWORK target property for SHARED library targets
2007-08-01 13:04:45 -04:00
dddbad259c
PERF: micro optimization: the (*pos1) && (*pos1=='/') were redundant, and
...
hasDoubleSlash is false in most cases, so in most cases 3 comparisons were
done, now only one
Alex
2007-07-23 09:06:48 -04:00
a4429ad30a
STYLE: fix line lengths and add "remove -f" to the docs
...
Alex
2007-07-17 10:44:09 -04:00
95a8331edb
ENH: produce a lot more output when running with --debug-output
...
-try to fix build error on HPUX
Alex
2007-07-17 09:25:08 -04:00
e126db1f71
BUG: handle dependencies to imported targets better: don't create a
...
dependency if the target name was not listed in DEPENDS, if it was listed in
DEPENDS, create a dependency to the file
Seems to work, but have to check with Brad.
Alex
2007-06-21 13:08:22 -04:00
35936433e1
ENH: Merging changes from branch CMake-SourceFile2-b between tags
...
CMake-SourceFile2-bp and CMake-SourceFile2-b-mp1 to trunk. This
commit is surrounded by tags CMake-SourceFile2-b-mp1-pre and
CMake-SourceFile2-b-mp1-post on the trunk.
The changes re-implement cmSourceFile and the use of it to allow
instances to be created much earlier. The use of cmSourceFileLocation
allows locating a source file referenced by a user to be much simpler
and more robust. The two SetName methods are no longer needed so some
duplicate code has been removed. The strange "SourceName" stuff is
gone. Code that created cmSourceFile instances on the stack and then
sent them to cmMakefile::AddSource has been simplified and converted
to getting cmSourceFile instances from cmMakefile. The CPluginAPI has
preserved the old API through a compatibility interface.
Source lists are gone. Targets now get real instances of cmSourceFile
right away instead of storing a list of strings until the final pass.
TraceVSDependencies has been re-written to avoid the use of
SourceName. It is now called TraceDependencies since it is not just
for VS. It is now implemented with a helper object which makes the
code simpler.
2007-06-18 11:59:23 -04:00
74750610cf
ENH: determine typesize by compiling a file and reading strings from the compiled output.
...
Tested with various gcc, XCode, MSVC7, sdcc
For OSX when doing TRY_COMPILE() CMAKE_OSX_ARCHITECTURES is used, if there are different results an error is generated. CMAKE_OSX_ARCHITECTURES can be overwritten for the TRY_COMPILES with CMAKE_TRY_COMPILE_OSX_ARCHITECTURES.
Alex
2007-06-04 17:08:46 -04:00
3f2dd9bc54
ENH: Made cmTarget::GetSourceFiles method return reference to const so addition of cmSourceFile pointers must be done with an access method in cmTarget.
2007-05-28 10:25:03 -04:00
79756b0e67
BUG: don't use non-imported target when cross compiling as commands in custom commands
...
STYLE: remove now invalid comments, use this->
Alex
2007-05-24 08:43:31 -04:00
5639c69d39
ENH: Removed unused code now that INSTALL_FILES and INSTALL_PROGRAMS are not targets.
2007-05-23 18:23:17 -04:00
9d75da9eaf
ENH: Removed unused code now that INSTALL_FILES and INSTALL_PROGRAMS are not targets.
2007-05-23 18:22:52 -04:00
ba7780a3c4
ENH: Fixed INSTALL_FILES and INSTALL_PROGRAMS commands to not create targets. No targets of type cmTarget::INSTALL_FILES or cmTarget::INSTALL_PROGRAMS are created, so we do not need to check for them everywhere anymore.
2007-05-23 15:40:12 -04:00
4878c00905
ENH: add the IMPORT keyword to ADD_EXECUTABLE(), which generates an
...
"imported" executable target. This can then be used e.g. with
ADD_CUSTOM_COMMAND() to generate stuff. It adds a second container for
"imported" targets, and FindTarget() now takes an additional argument bool
useImportedTargets to specify whether you also want to search in the
imported targets or only in the "normal" targets.
Alex
2007-05-22 10:24:59 -04:00
92c0f41251
ENH: Use CMAKE_PLATFORM_IMPLICIT_LINK_DIRECTORIES from platform files to block link directories.
2007-05-18 11:36:23 -04:00
891f2130cf
COMP: fix link rules with nmake, the linker command has to be converted to shortpath form for nmake
...
Alex
2007-05-18 10:32:22 -04:00
c25d2bfdd2
ENH: Added testing for custom command line arguments containing all special characters on the US keyboard. Fixed curly brace arguments on borland and % arguments in mingw32-make.
2007-05-17 10:53:18 -04:00
bd78952748
BUG: Do not emit /usr/lib32 or /usr/lib64 as linker paths. Submitted by David Faure.
2007-05-16 09:07:53 -04:00
76dd86b410
BUG: fix -D escaped quotes for watcom
2007-05-10 14:43:55 -04:00
7f11536704
ENH: now target names can be used in add_custom_command() and
...
add_custom_target() as COMMAND, and cmake will recognize them and replace
them with the actual output path of these executables. Also the dependency
will be added automatically. Test included.
ENH: moved TraceVSDependencies() to the end of GlobalGenerator::Configure(),
so it is done now in one central place
Alex
2007-05-09 08:25:45 -04:00
39ccc4fb11
ENH: fix it so that the FRAMEWORK property does not break the building of normal shared libs on non-mac platforms
2007-05-08 11:53:39 -04:00
9323a27989
ENH: initial support for creation of frameworks on Mac
2007-05-08 10:32:54 -04:00
47159b69be
BUG: Fix ComputeLinkInformation. When using a loader_flag link item the full per-configuration path should be used. The fullPathLibs returned should refer to the import library if it was used. Since the full paths are used for dependencies the executable used with loader_flag should be returned also.
2007-04-18 09:56:06 -04:00
4241e699c7
BUG: Cannot escape link items because some need the spaces to separate arguments. Instead just escape the argument to the loader flag.
2007-04-18 00:04:56 -04:00
07b9423e7d
BUG: Fix ComputeLinkInformation for non-linked targets. Why is it called for utility targets anyway?
2007-04-17 23:16:35 -04:00
f9f5772557
ENH: Added use of platform variable CMAKE_SHARED_MODULE_LOADER_<lang>_FLAG to add a special flag when linking a plugin to an executable that loads it.
2007-04-17 16:11:00 -04:00
a017333d9a
ENH: Added option CMAKE_INSTALL_SO_NO_EXE on linux to choose whether the default permissions for shared libraries include the executable bit. This is necessary to support the conflicting policies of Debian and Fedora. These changes address bug#4805.
2007-04-10 11:22:15 -04:00
5ed2141d12
ENH: make sure default /System framework is not added with -F
2007-03-30 10:53:02 -04:00
5a32aa5919
ENH: Added target property ENABLE_EXPORTS for executable targets. It enables the executables for linking by loadable modules that import symbols from the executable. This finishes the executable import library support mentioned in bug #4210 .
2007-03-22 09:45:25 -04:00
1f639ee76c
ENH: Added computation of object file names that are almost always short enough to not exceed the filesystem path length limitation. This is useful when a source file from outside the tree is referenced with a long full path. The object file name previously would contain the entire path which when combined with the build output directory could exceed the filesystem limit. Now CMake recognizes this case and replaces enough of the beginning of the full path to the source file with an md5sum of the replaced portion to make the name fit on disk. This addresses bug#4520.
2007-03-16 10:34:25 -04:00
9da6f96d98
BUG: Reverting previous changes related to using an empty string for a relative path to the current directory. Too many places want the . version. Instead we can just convert the . to an empty string in the one place that motiviated the original change.
2007-03-14 16:29:10 -04:00
a724f0d425
BUG: During relative path conversion if the remote and target paths are the same return the empty string instead of ".".
2007-03-14 13:36:24 -04:00
d720036e61
BUG: Fix check of EXCLUDE_FROM_ALL property to use boolean type. This is required for installation of subdirectories to work.
2007-03-13 11:58:12 -04:00
b99129d2d8
ENH: some code cleanup
2007-03-12 10:26:59 -04:00
1e25f2b3db
BUG: Use real path subdirectory check instead of substring comparison to identify when paths are below the relative path tops. Otherwise when the build tree is next to the source tree with the same name plus a suffix the relative path from the binary to source tree is allowed even though it goes outside cmake-managed directories.
2007-03-09 17:15:13 -05:00
54923d6ad8
ENH: Implemented new policy to choose the directory part of the object file name. This should keep the names looking as nice and short as possible. This partially addresses bug#4520.
2007-03-09 10:30:07 -05:00
528f60f4a6
ENH: Added implib option to cmTarget::GetDirectory to support a separate directory containing the import library. This is an incremental step for bug#4210.
2007-03-09 09:30:16 -05:00
4089c76890
BUG: Some calls to Convert() were converting for MAKEFILE but then passing the output to the build shell. The calls have now been converted to call Convert() with SHELL.
2007-03-08 10:31:03 -05:00
2f2b5b2503
ENH: SetupPathConversions is now called automatically on demand.
2007-03-08 08:38:40 -05:00
b90e241a31
ENH: Modified GetObjectFileNameWithoutTarget to use relative paths for object file names with sources above the current directory so long as the relative path conversion works.
2007-03-07 17:39:16 -05:00
4036627487
ENH: Improved computation of RelativePathTopSource and RelativePathTopBinary to use higher relative path tops when the source directories jump around in a tree below the original source top.
2007-03-07 17:32:35 -05:00
ad4055f3e2
ENH: Set RelativePathTopSource and RelativePathTopBinary independently for each local generator. Relative path conversion is safe within a tree as long as it does not go above the highest parent directory still managed by CMake.
2007-03-07 16:35:53 -05:00
c841258170
COMP: Add missing include for assert.
2007-03-07 15:30:30 -05:00
fc19882e8f
ENH: Moved ConvertToRelativePath from cmGlobalGenerator to cmLocalGenerator. This is in preparation for setting up each local generator to have its own RelativePathTopSource and RelativePathTopBinary based on its ancestor directories.
2007-03-07 15:15:46 -05:00
1503caa14e
ENH: remove qnx special stuff that does not work
2007-02-28 17:26:20 -05:00
ecbec236b1
ENH: one more pass at paths with spaces and parens
2007-02-28 14:29:26 -05:00
90974ea1d6
ENH: go back to \ escapes for qnx
2007-02-26 11:56:13 -05:00
4d5321f891
ENH: go back to EscapeForShell version
2007-02-26 11:41:41 -05:00
512d5dd1e3
ENH: try and use \ for space and () escapes
2007-02-25 16:13:33 -05:00
f0d5bdf86e
ENH: try another thing 3
2007-02-23 20:37:35 -05:00
d7e57294fb
ENH: try another thing
2007-02-23 17:38:59 -05:00
77ad2d62c2
ENH: add some debug stuff
2007-02-23 17:07:57 -05:00
ae1d9e8b93
ENH: add some debug stuff
2007-02-23 16:44:13 -05:00
8ad3430931
ENH: Make EXCLUDE_FROM_ALL a target and directory properties. Also, make IsInAll use EXCLUDE_FROM_ALL. Also, enable the test that tests this
2007-02-23 09:46:27 -05:00
48202ef623
ENH: hack put the hack back for qnx to try and fix spaces in the path
2007-02-22 17:34:14 -05:00
0b350cbb97
ENH: undo hack and try to get dashboard back
2007-02-22 17:26:36 -05:00
c1eae5b891
BUG: Hack to try working around a problem with spaces in an rpath on QNX.
2007-02-22 16:23:12 -05:00
417b2073df
ENH: add new escape stuff
2007-02-22 15:33:49 -05:00
5647e6e254
ENH: fix parens in the path with spaces in the path
2007-02-21 21:24:17 -05:00
f7cd9f76ce
STYLE: fix line length issues
2007-02-17 08:46:25 -05:00
66523061d0
ENH: remove warnings and debug statement
2007-02-17 08:38:41 -05:00
ca0230a33e
ENH: check in initial conv library stuff
2007-02-16 16:12:17 -05:00
8013ffd23b
ENH: do not use crazy long paths to object files for try compile
2007-01-31 16:49:25 -05:00
37d979e0fc
ENH: this does not need to be safe as the value is checked
2007-01-23 14:28:40 -05:00
0272c209a5
ENH: avoid crash, but do not make it an error if include flags is missing from a language
2007-01-23 13:08:40 -05:00
91bd8099d8
ENH: make the include flag required for a language avoids seg fault
2007-01-23 11:39:22 -05:00
27379d7b08
ENH: make properties a bit more formal with documentation and chaining
2006-12-07 09:45:32 -05:00
26b527ac0f
ENH: fix bug in full path to target depends stuff
2006-12-06 23:05:10 -05:00
d045ae45f2
BUG: Do not print empty install configuration repeatedly.
2006-12-04 13:54:32 -05:00
ccb77b65c6
ENH: unify version stuff, get rid of it out of cmake and cmMakefile and only use cmVersion
2006-11-29 15:59:16 -05:00
9baa760315
BUG: fix problem when a target name is the same as the output of a custom command
2006-11-25 10:59:26 -05:00
54731fa2c8
ENH: Adding support for # escape in Watcom WMake.
2006-10-25 11:23:04 -04:00
b155f3aa1c
ENH: Adding image version number (major.minor) property to windows binaries. Default is 0.0, but the VERSION target property may change the value. Windows now has first-class support for dll and exe versioning. This addresses bug#1219.
2006-10-16 18:17:14 -04:00
023041362d
BUG: Do not try to compute the location of a non-library target for linking.
2006-10-13 10:03:54 -04:00
86dd8579c5
BUG: TARGET_QUOTED should always be replaced if Target is set in the rule variables.
2006-10-10 14:13:35 -04:00
bdf8e186e5
BUG: Need to match shared library names before static because some platforms have static name patterns that match their shared patterns but not vice versa. This is needed for implementing bug#1644 on cygwin.
2006-10-05 16:59:46 -04:00
7ad07e0811
BUG: Fix link flags on cygwin shared libraries. This requires that the shared library prefix be supported in the link library regex.
2006-10-05 15:08:20 -04:00
c11cf31c9b
ENH: Adding SYSTEM option to INCLUDE_DIRECTORIES command. This addresses bug #3462 .
2006-10-05 08:55:59 -04:00
406f3554c7
BUG: Fixed display of custom command comments with quotes, dollars, and other special characters in them.
2006-10-04 18:52:29 -04:00
9a1d4e92eb
BUG: Fix/cleanup custom commands and custom targets. Make empty comment strings work. Fix ZERO_CHECK target always out of date for debugging. Fix Makefile driving of custom commands in a custom target. Fix dependencies on custom targets not in ALL in VS generators.
2006-09-28 16:40:35 -04:00
019dabc97f
BUG: MSYS makefile shell needs posix paths to executables in some cases and it does not hurt to do it always.
2006-09-28 10:37:19 -04:00
0b135767d6
BUG: Do not filter system directories for include file dependencies.
2006-09-28 09:49:40 -04:00
dd332a00cc
ENH: Re-implemented command line argument shell quoting to support several platforms with one code base.
2006-09-27 13:43:46 -04:00
c1b4a0bf74
BUG: Disable new shell escape code until backward compatibility can be established in the new implementation.
2006-09-25 10:22:48 -04:00
6d72bb5ae1
BUG: Need to escape spaces in custom command line arguments.
2006-09-21 15:35:41 -04:00
45a44a70b3
BUG: Do not escape parens because we need to be able to reference make variables in the scripts.
2006-09-21 15:30:06 -04:00
2459ceb076
BUG: Centralized generation of command line arguments in escaped form. This addresses bug#3786 for several platforms.
2006-09-21 15:14:06 -04:00
4a3a9eb883
BUG: Do not look for linker language unless it is needed.
2006-09-16 11:52:00 -04:00
1d0502927c
ENH: Adding support to link specifically to an archive or a shared library based on the file name specified. This fixes the problem of having -lfoo linking to libfoo.so even when it came from libfoo.a being specified.
2006-09-15 14:09:10 -04:00
eef327b944
ENH: Adding install/local global target for Makefile generators. This runs installation only in the current directory and not subdirectories.
2006-08-29 10:03:47 -04:00
8f1aaf28c1
ENH: make sure RuleVariable struct is initialized correctly, also make sure custom command targets do not crash cmake
2006-08-08 13:44:25 -04:00
5cfa1b02ab
ENH: Added generation of rules to manually request preprocessed or generated assembly sources.
2006-08-07 23:25:21 -04:00
88702ff442
ENH: Moved GetSourceFileLanguage up to cmLocalGenerator.
2006-08-03 09:26:07 -04:00
9bf5af6e32
ENH: Moved unique object file name computation from cmLocalUnixMakefileGenerator3 up to cmLocalGenerator for use by all generators. Created cmLocalVisualStudioGenerator as superclass for all VS generators. Implemented on-demand unique object file name computation for VS 7 generator to avoid slow compiles when all sources are in subdirectories.
2006-07-11 11:41:38 -04:00
b4542762a7
ENH: Added target property INSTALL_RPATH_USE_LINK_PATH to append the linker search path directories not inside the project to the INSTALL_RPATH automatically. The property is initialized by the variable CMAKE_INSTALL_RPATH_USE_LINK_PATH when the target is created.
2006-06-15 10:12:19 -04:00
8e9a6beccc
ENH: centralized locaiton of CMakeFiles setting
2006-06-14 12:28:32 -04:00
7dc8a92246
STYLE: fix line length
2006-05-12 11:56:09 -04:00
50a0f71120
ENH: Added CONFIGURATIONS option to INSTALL command to allow per-configuration install rules.
2006-05-05 14:57:19 -04:00
8d3d137dc9
ENH: make sure special vs ide path is only used for msvc_ide builds
2006-04-25 11:58:01 -04:00
8c02cc6627
ENH: Added option CMAKE_INCLUDE_DIRECTORIES_PROJECT_BEFORE to put all in-project include directories before all out-of-project include directories.
2006-04-25 09:54:12 -04:00
0005d625a0
ENH: add special windows CMAKE_MSVCIDE_RUN_PATH variable for adding to the path of vs IDE for running custom commands from cmake
2006-04-25 09:38:29 -04:00
e6ef33f598
ENH: name pdb files for visual studio make based builds
2006-04-19 16:36:14 -04:00
8fa5ed7300
ENH: fix java for ide builds again
2006-04-17 15:35:51 -04:00
5ecfd3d4d3
ENH: fix java and add OBJECT_DIR support
2006-04-17 14:01:22 -04:00
ed4974da55
ENH: enable test for java with IDE builds
2006-04-11 17:11:34 -04:00
08289893b8
ENH: Split CMAKE_STANDARD_LIBRARIES into per-language variables CMAKE_<lang>_STANDARD_LIBRARIES. This is needed to get programmable language support working with Visual Studio generators. It makes sense anyway.
2006-04-11 16:55:49 -04:00
bb014b0f4d
ENH: Restored implementation of AddCustomCommandToCreateObject. Updated it to use newer custom command functionality.
2006-04-11 14:53:57 -04:00
ae2cbc346d
BUG: Install scripts should honor EXCLUDE_FROM_ALL options for subdirectories. This addresses bug#3100.
2006-04-11 13:32:48 -04:00
acf33ba191
BUG: Do not add non-per-config subdirectory name of cmake target libraries as full path libs.
2006-04-11 11:40:24 -04:00
d5719f22c1
ENH: Added support for multiple outputs generated by a single custom command. For Visual Studio generators the native tool provides support. For Xcode and Makefile generators a simple trick is used. The first output is considered primary and has the build rule attached. Other outputs simply depend on the first output with no build rule. During cmake_check_build_system CMake detects when a secondary output is missing and removes the primary output to make sure all outputs are regenerated. This approach always builds the custom command at the right time and only once even during parallel builds.
2006-04-11 11:06:19 -04:00
8e39418f6c
BUG: Fixed cmOrderLinkDirectories to deal with raw link items that do not yet exist and correct drive letter case to avoid duplicate paths on windows. Fixed cmLocalGenerator to pass CMake targets as full paths to cmOrderLinkDirectories to make sure the ordering will pick up the proper target libraries.
2006-04-05 11:05:06 -04:00
99ee1883d4
BUG: Removing part of earlier fix because it does not work with VS generators. It may be restored later after cmOrderLinkDirs is further fixed.
2006-04-04 17:14:20 -04:00
57a9e26c15
BUG: Fixed cmOrderLinkDirectories to make sure cmake-built libraries are found properly. Also taking libraries that will be built but may not yet exist into account. The per-configuration subdirectories that are included by generators in the link path are checked for conflicting libraries also. Potentially conflicting libraries that are actually symlinks back to the desired library are no longer considered conflicting, which avoids bogus impossible ordering warnings.
2006-04-04 14:25:17 -04:00
2301a025ea
ENH: Added global TargetManifest computation between Configure and Generate steps. This allows generators to know what other targets will exist on disk when the build completes.
2006-04-04 11:48:19 -04:00
3c8e899102
ENH: add support for per config target LINK_FLAGS
2006-04-03 12:57:51 -04:00
08b14163ee
ENH: Added named component installation implementation. Installation behavior should be unchanged unless -DCOMPONENT=<name> is specified when cmake_install.cmake is invoked.
2006-03-30 13:33:48 -05:00
93f5712a7d
COMP: Remove warnings
2006-03-28 16:25:29 -05:00
f7c1723135
ENH: add support for universal binaries
2006-03-24 09:15:05 -05:00
0376fe4b9b
ENH: Added support for linking to MS .lib libraries in MinGW.
2006-03-22 11:10:58 -05:00
bcfca6e1c1
ENH: Enabling CMAKE_INCLUDE_CURRENT_DIR even for in-source builds to be more consistent with its name. This also makes double-quote and angle-bracket include styles (almost) identical.
2006-03-21 08:45:57 -05:00
77c65b954e
BUG: Fixed generation of mismatched IF in install script. This bug was introduced during the m_ sweep.
2006-03-16 14:51:54 -05:00
3d96e52261
STYLE: some m_ to this-> cleanup
2006-03-15 11:02:08 -05:00
3f532f5489
ENH: add support for language flags at rule expansion time
2006-03-06 15:14:23 -05:00
2b7e43961c
BUG: Fix for generated install scripts to support prefixes with trailing slashes or just a single slash.
2006-03-05 09:09:12 -05:00
a2e136fd17
ENH: Added PERMISSIONS and RENAME options to the INSTALL command's FILES and PROGRAMS mode, and corresponding support to FILE(INSTALL). Default permissions for shared libraries on non-Windows/non-OSX platforms no longer has the execute bit set.
2006-03-03 18:44:32 -05:00
586a9427d3
ENH: Created target property INSTALL_NAME_DIR initalized by CMAKE_INSTALL_NAME_DIR specifying the directory portion of the OSX install_name field in shared libraries. This is the OSX equivalent of RPATH.
2006-02-24 13:13:14 -05:00
576f0b65c7
BUG: Fix generation of Xcode 2.0 and earlier projects to use CMAKE_BUILD_TYPE.
2006-02-24 11:13:31 -05:00
f119d6e4ef
COMP: Remove warnings
2006-02-24 10:56:39 -05:00
39e636a4a4
ENH: change expand stuff to pass a struct for all the args
2006-02-20 13:42:18 -05:00
518080136d
ENH: Implemented FILES and PROGRAMS forms of the INSTALL command as replacements for the INSTALL_FILES and INSTALL_PROGRAMS commands. This addresses the request for absolute path install destinations in bug#2691.
2006-02-19 18:47:13 -05:00
96f0266228
ENH: Created new install script generation framework. The INSTALL command creates the generators which are later used by cmLocalGenerator to create the cmake_install.cmake files. A new target installation interface is provided by the INSTALL command which fixes several problems with the INSTALL_TARGETS command. See bug#2691. Bugs 1481 and 1695 are addressed by these changes.
2006-02-19 15:25:27 -05:00
98a187a8d4
ENH: Automatic include directories should not be done by default as was just implemented. Instead a project may now set CMAKE_INCLUDE_CURRENT_DIR to get this behavior. The current source and binary directories are added automatically to the beginning of the include path in every directory. This simulates in-source behavior for double-quote includes when there are generated sources and headers in the directory.
2006-02-19 13:10:25 -05:00
377f4e79b1
BUG: Remove trailing slashes from install destinations.
2006-02-18 16:47:28 -05:00
644f6e83ee
COMP: Fixed shadowed variable warning.
2006-02-18 15:42:14 -05:00
81677b3130
ENH: Generate import libraries for DLLs on Cygwin and MinGW.
2006-02-18 15:37:23 -05:00
9ba0283870
ENH: If CMAKE_NO_AUTOMATIC_INCLUDE_DIRECTORIES is not set try to approximate in-source build include file behavior in an out-of-source build by adding the build tree directory corresponding to a source tree directory at the beginning of the include path. Also fixed VS6 and VS7 generators to use cmLocalGenerator's computation of include paths. The VS6 generator will now short-path the include directories if the total length is too long in order to try to avoid its truncation limit.
2006-02-18 11:51:23 -05:00
537e2b4ed5
ENH: Implemented RPATH specification support. It is documented by the command SET_TARGET_PROPERTIES.
2006-02-16 15:19:00 -05:00
b8a33fb424
ENH: Added INSTALL command as a placeholder for a future generic install specification interface. Currently it supports only a SCRIPT option specifying a script to run during the install stage.
2006-02-10 13:54:36 -05:00
6cccf0ab30
ENH: fix bug for single char libraries
2006-02-10 10:11:16 -05:00
347c5f4b46
ENH: add working directory support
2006-02-08 10:58:36 -05:00
a2c1777300
COMP: fix warning
2006-01-24 07:58:55 -05:00
a6a20d8ce2
ENH: fix warning
2006-01-23 17:24:18 -05:00
7f237c51f4
ENH: fix problem with watcom and short paths and -I
2006-01-23 13:50:23 -05:00
8340c0d186
ENH: Further centralized custom command dependency computation. Custom command dependencies in the source tree may now also be specified relative to the source directory.
2006-01-13 20:51:45 -05:00
079826d367
COMP: Removed unused variables.
2006-01-13 19:35:16 -05:00
327489ae59
COMP: Removed unused paramter from cmLocalGenerator::OutputLinkLibraries.
2006-01-13 18:33:51 -05:00
22c62c9e65
BUG: Sweeping changes to cleanup computation of target names. This should
...
fix many bugs related to target names being computed inconsistently.
- Centralized computation of a target's file name to a method in
cmTarget. Now that global knowledge is always available the
*_CMAKE_PATH cache variables are no longer needed.
- Centralized computation of link library command lines and link
directory search order.
- Moved computation of link directories needed to link CMake targets
to be after evaluation of linking dependencies.
This also removed alot of duplicate code in which each version had its
own bugs.
This commit is surrounded by the tags
CMake-TargetNameCentralization1-pre
and
CMake-TargetNameCentralization1-post
so make the large set of changes easy to identify.
2006-01-13 18:18:32 -05:00
82bb6fae0d
ENH: add framework support to FIND_FILE
2005-12-27 14:56:56 -05:00
452925649a
ENH: add better support for framework linking
2005-12-26 13:14:19 -05:00
f6588b7919
ENH: fix borland make clean targets before build, add new generators for msys and mingw
2005-12-22 16:42:36 -05:00
163e3ff56c
ENH: Removed cmMakefile arguments from cmTarget methods because cmTarget has the ivar m_Makefile now. Re-implemented cmLocalUnixMakefileGenerator3::AppendAnyDepend to use the new global knowledge and avoid the need to look at the cache for information about other targets. This should fix problems with custom commands and executables with the OUTPUT_NAME set. Also the <target>_LIBRARY_TYPE cache variable is no longer needed at all and has been removed.
2005-12-14 10:47:33 -05:00
ea7c7bb34d
ENH: Allow the installer to overwrite the install prefix
2005-12-10 12:11:20 -05:00
34e7834451
ENH: Add support for output reguilar expression
2005-11-08 17:59:20 -05:00
fcce3ac0a1
ENH: Add a way for test to intentionally fail
2005-09-06 23:31:41 -04:00
d392acb4e6
ENH: Added versioned executable support. This partially addresses bug#2143. Also made OUTPUT_NAME work when installing executables.
2005-08-17 16:11:18 -04:00
e59e9d0e59
ENH: fix bug 2087 lib prefix stripped off on windows
2005-08-10 12:55:41 -04:00
bebc745824
ENH: Add set and get test propety command
2005-07-31 11:51:42 -04:00
c6b011e35e
ENH: put cmake files intoa CMakeFiles subdir to clean up bin tree
2005-07-29 09:19:25 -04:00
f85f919dbc
ENH: reduce the number of files produced still needs a bit more cleanup
2005-07-27 09:49:37 -04:00
b8b298104b
ENH: make sure flags set in CC or CXX environment variables stay with the compiler
2005-07-20 15:44:55 -04:00
44b54d2b94
ENH: fix for bug 992, mac bundle install fix
2005-07-14 16:00:40 -04:00
1b115dc2e3
ENH: add -L as possible library flag
2005-07-13 16:24:16 -04:00
d11707c6e6
BUG: fix for debug optimized link libraries
2005-07-05 09:00:20 -04:00
369308ca76
ENH: make LOCATION an computed property of the target and get rid of a bunch of const junk
2005-06-22 09:06:46 -04:00
708828dc37
ENH: removed old convert calls
2005-06-10 08:41:47 -04:00
6af66e8b20
ENH: Add capability to include files to DartTestfile.txt and add example of that
2005-06-07 09:57:05 -04:00
a3a7f040c6
COMP: shut up warning
2005-05-13 15:50:42 -04:00
8c65179339
ENH: warning fixes and some first steps in cleaning up the convert code
2005-05-13 09:54:30 -04:00
26d4dd174f
COMP: Remove warning
2005-04-25 09:59:59 -04:00
d395b563ed
ENH: Improve internal test handling by creating a test class. Command cmEnableTesting now only sets CMAKE_TESTING_ENABLED and cmAddTest only adds a test to the list. The actual test files are written by local generator. This way we can at some point in the future replace DartTestfile with some XML file
2005-04-24 15:59:51 -04:00
1b71f4477b
ENH: Added cmTarget::GetBaseName and cmTarget::GetFullName methods and removed cmLocalGenerator::GetFullTargetName and cmLocalUnixMakefileGenerator2::GetBaseTargetName. This functionality is more sensibly implemented in cmTarget. It is also needed for an upcoming feature in which both the shared and static versions of a library will be removed before one is linked.
2005-04-22 15:23:21 -04:00
c8cc20a1af
BUG: add missing header for borland
2005-04-12 15:11:54 -04:00
1004073942
ENH: performance improvements
2005-04-12 13:27:07 -04:00
ee7fbdf058
BUG: local gen was setting proj dir when it shouldnt
2005-04-12 09:36:18 -04:00
e0fab29395
ENH: remove commented code
2005-03-22 07:27:10 -05:00
345cf04012
ENH: big change that includes immediate subdir support, removing the notion of inherited commands, makefiles no longer read in the parent makefiles but instead inherit thier parent makefiles current settings
2005-03-18 10:41:41 -05:00
791aa6052b
ENH: add support for out of source source
2005-03-14 11:29:15 -05:00
ea258e9a1a
ENH: Converted some ConvertToRelativeOutputPath calls to ConvertToOptionallyRelativeOutputPath in preparation for making ConvertToRelativeOutputPath not check CMAKE_USE_RELATIVE_PATHS.
2005-02-24 16:25:47 -05:00
cb48e0c161
ENH: Merged implementations of ConvertToRelative*Path methods. The main ConvertToRelativePath method is now in cmGlobalGenerator. It converts paths only if they are at least inside the deepest common directory between the top-level source and build trees. Each cmLocalGenerator instance calls this global method with its own output directory as the "local" argument from which paths are relative. Added separate ConvertToOptionallyRelative path that pays attention to the CMAKE_USE_RELATIVE_PATHS option.
2005-02-24 16:04:54 -05:00
2ebbf64508
ENH: remove unused code
2005-02-24 14:27:16 -05:00
ff812580eb
ENH: add a new library path ordering algorithm to make sure -L paths will pick the correct libraries if possible
2005-02-24 13:16:41 -05:00
7c7b173042
ENH: Added better default install location for windows builds. The previous default /usr/local did not make much sense. Now "%SystemDrive%/Program Files/PROJECT_NAME" is used, which is the windows equivalent to /usr/local.
2005-02-22 15:22:40 -05:00
39af9ee1e4
ENH: Updated implementation of custom commands. Multiple command lines are now supported effectively allowing entire scripts to be written. Also removed extra variable expansions and cleaned up passing of commands through to the generators. The command and individual arguments are now kept separate all the way until the generator writes them out. This cleans up alot of escaping issues.
2005-02-22 10:32:44 -05:00
Brad King
David Cole
Bill Hoffman
Ken Martin
Alexander Neundorf
Andy Cedilnik