The lexical scope counting added by commit v3.2.0-rc1~332^2~1 (Track
nested loop levels in CMake language with a stack of counters,
2014-11-18) forgot to account for scopes popped by error messages about
unclosed scopes. Teach the error handler to pop the lexical scope it
reports as unclosed. Re-order the lexical scope RAII object to be
inside the variable scope RAII object scope so that the lexical scope
is fully closed before we check assertions about variable scopes.
Extend the RunCMake.Syntax test with a case covering this.
There is no need to duplicate these in all cmLocalGenerators.
Rename the symbols according to current conventions.
Add explicit calls to Set{Source,Binary}Directory with empty strings
in order to trigger the population of the components containers with
the current working directory in cmLocalGenerator. Having
directories set to empty is a special case in CMake, which is relied
on for the `if(CMAKE_BINARY_DIR)` condition at the end of
CMakeDetermineSystem.cmake.
The InitializeAutogenTarget creates new targets and adds them to the
Targets container on the makefile. In this method, we have a reference
to that container and we are iterating over it. That happens to work
with hash_map, but it fails with undefined behavior when using the
std::unordered_map from libstdc++-4.9 (and likely others).
ce167b54 cmMakefile: Handle CMP0014 before configuring the generator.
7baef756 cmLocalGenerator: Assert that there is a parent.
63255342 cmMakefile: Remove redundant variable set.
894961af cmMakefile: Use the state to determine the parent directory.
115e9199 Use new top-level check abstraction.
c5059c90 cmLocalGenerator: Add abstraction to check if top-level.
b17686d2 cmGlobalGenerator: Move some flags from cmLocalGenerator.
ed41a8e7 cmLocalGenerator: Port loops to cmState::Snapshot.
48a9e91b cmState: Add an accessor for Parent snapshot and a validity check.
e7f7c2e2 cmLocalGenerator: Convert two recursive methods to loops.
c5cb3a73 cmLocalGenerator: Get project directories from the cmState.
76b59831 cmLocalGenerator: Initialize state before creating cmMakefile.
34c9ee2e cmLocalGenerator: Require a global generator in the constructor.
3837c483 Tests: Add case for 'ctest' run with bad CTestTestfile
b317b38d cmGlobalBorlandMakefileGenerator: Do not inherit from NMake generator
94867698 Don't use a cmLocalGenerator instance to call static methods.
...
If the CMakeLists.txt file does not exist, there must be a parent.
The case for the top-level of the project is already handled in
cmake::DoPreConfigureChecks.
The Borland generator re-implements every method the NMake generator
does, so there is no reason to inherit this way. Instead inherit
directly from cmGlobalUnixMakefileGenerator3 like all the other
makefile generators do.
KWSys upstream added an attribute to export .gitattributes so that
importing snapshots into the sources of other projects would bring along
the attributes. However, we don't want to export them from CMake.
Drop .gitattributes entries not relevant to CMake.
Teach the legacy two-argument signature to use CMAKE_CONFIG_TYPE
from the environment only if it is non-empty. This makes behavior
consistent with the main signature.
The find_package command, on Windows, has always searched build trees
recently visited by cmake-gui (or CMakeSetup at one time). This was
done when the command was created with the intention of simplifying
workflows involving building multiple dependent projects. However,
this behavior depends on recent developer interaction and therefore
can create different find results based on transient system states.
It can lead to surprising results and user confusion.
Since this behavior was first added CMake has gained many more search
options, better error messages when a package is not found, and a
package registry. The latter in particular allows projects to make
their build trees available for dependent projects to find without
user intervention. Therefore the originally intended workflow can
be achieved in other, more stable ways.
After the above evoluion of find_package we have now decided that
the magic search-where-cmake-gui-was behavior does more harm than
good. Drop it. We do not need a policy for this behavior change
because it only affects interactive use.
The GNU 4.8 standard library's cstdio header is not aware that C++14
honors C11's removal of "gets" from stdio.h and results in an error:
/.../include/c++/4.8/cstdio:120:11: error: no member named 'gets' in the global namespace
Detect this problematic case and default to using C++11 instead of
C++14 for building CMake itself.
20560e8d Ninja: Do not use newlines in response files with Windows GNU tools (#15439)
b3de0dfe Ninja: Use forward slashes for any GCC on Windows (#15439)
378c2a0e Ninja: Refactor detection of MinGW tools on Windows
957c2aac RC: Simplify selection of resource compiler based on C/C++ toolchain
Use the KWSys Process "MergeOutput" option to give the child process
the same pipe (or file) for both stdout and stderr. This allows
natural merging of stdout and stderr together instead of merging
on arbitrary buffered read boundaries as before.
Since commit v2.8.11~213^2 (Ninja: Avoid LNK1170 linker error, 2013-02-01)
we generate linker response files with "$in_newline" to support a large
number of object files with the MS link.exe tool. However, the GNU linker
on Windows does not understand the newline endings that Ninja puts in the
response files. Switch back to "$in" for that case.
Check for CMAKE_COMPILER_IS_MINGW only after enabling a language when it
might actually be set. Previously this worked by accident because the
check for working compiler or a second language enabled would cause the
code path to be taken.
Store UsingMinGW as an instance member of cmGlobalNinjaGenerator so that
it is reset on each reconfigure. Otherwise cmake-gui cannot switch
between build trees for MinGW or non-MinGW tools.
Revert the refactoring by commit v2.8.11~105^2~1 (Ninja: use MinGW
generator code in EnableLanguage, 2013-03-09) and move the MinGW-
specific logic back to the "MinGW Makefiles" generator. Instead teach
the platform information modules for GNU and MSVC on Windows to set the
preferred RC compiler just before enabling the RC language. This way
we choose the RC compiler based on the C/C++ toolchain that is actually
enabled.
013ada80 cmPolicies: Implement PolicyMap in terms of bitset.
be6664c2 cmPolicies: Implement abstraction for PolicyMap.
de211686 Port to static cmPolicies API.
13981f20 cmPolicies: Make all API static.
23e2bcc8 cmPolicies: Remove unused DefinePolicy method.
5641ba4f cmPolicies: Remove unused cmPolicy class.
3de54497 cmPolicies: Loop over all policies using enum constants.
387aff20 cmPolicies: Trivialize GetPolicyStatus method.
dbf680d6 cmPolicies: Use more-direct ID access.
8c204133 cmPolicies: Implement in terms of public API.
e3a8c029 cmPolicies: Make private method file-static.
cb765af0 cmPolicies: Implement short description access with XMacros.
5df267fa cmPolicies: Implement version check with XMacro.
2235cfeb cmPolicies: Implement id to version with XMacro.
05d84388 cmPolicies: Implement id to string conversion with XMacro.
6eaade8a cmPolicies: Introduce XMacro table for policy data.
...
a0836ed9 Port to cmMakefile::GetGlobalGenerator.
cbf143bb cmComputeTargetDepends: Use simpler global generator access.
040491fc cmComputeLinkDepends: Remove unused local generator.
0bb6dbe0 cmMakefile: Extract an accessor for the global generator.
e1bdf5f5 cmMakefile: Use GetCMakeInstance.
efcca935 cmMakefile: Simplify GetCMakeInstance implementation.
6c7dad41 cmDefinitions: Make Get method static.
a7ce0c7b cmDefinitions: Make GetInternal method static.
7a5039fa cmDefinitions: Use static member without this->.
191573f7 cmDefinitions: Remove Parent pointer.
8b1745a1 cmDefinitions: Accept varStack iterators in Get API.
Since commit 80909041 (cmMakefile: Disable copy constructor, 2015-04-18)
the only call to cmMakefile::Initialize is in one constructor. Inline
it and drop the separate method.
In commit 86f3cd0f (cmMakefile: Require the localGenerator in the
constructor, 2015-04-27) we added use of GetDefinition to the
Initialize method. Set SuppressWatches before calling this method
since GetDefinition checks it.
When Configure is executed multiple times with the same cmake
instance (either using CTest --two-config or a interactive gui), the
location and structural data was preserved though it would not be used
again. Fix that by clearing the data in a method called early in
the configure step.
For some reason, using recursion here is faster to configure ParaView
than using a loop. Probably some compiler optimization is inhibited
by using a loop.
Co-Author: Brad King <brad.king@kitware.com>
When given the command line
tool a\ b c
mingw32-make incorrectly passes "a b" and "c" to the tool. When given
the command line
tool a\ b "c"
mingw32-make correctly passes "a\", "b", and "c" to the tool.
Since commit v3.1.0-rc1~861^2 (MSVC: Add properties to configure
compiler PDB files, 2014-02-24) we pass the compiler pdb option to
MS-style compiler tools as "/Fd<dir>\" but mingw32-make may consume
the backslash as escaping a following space as described above.
Workaround this problem by changing the backslash to a forward
slash as had been used prior to the above commit.
b48ea26a cmDefinitions: Invert conditional code.
5ccff640 cmDefinitions: Externalize looping for ClosureKeys.
f79cd99d cmDefinitions: Implement MakeClosure in terms of reverse iterators.
aa4d1ee8 cmDefinitions: Convert MakeClosure into a static method.
60becdc6 cmDefinitions: Implement MakeClosure in terms of a list of ancestors.
d858f363 cmDefinitions: Use list of cmDefinitions* to create closure.
aaaa65b6 cmMakefile: Remove stack adaptor for the VarStack.
f983d891 cmDefinitions: Replace recursion with loop.
24885d4e cmDefinitions: Replace private constructor with MakeClosure.
012a75a0 cmDefinitions: Make ClosureKeys API vector-based.
ca9fa77d cmDefinitions: Inline GetClosureKeys implementation.
78e1454e cmDefinitions: Replace ClosureKeys recursion with looping.
818bf727 cmDefinitions: Change LocalKeys to return a vector.
5067ae41 cmDefinitions: Externalize the Set logic.
60200ca5 cmDefinitions: Add an Erase method.
b43c162e cmMakefile: Use the Internal class to enclose the VarStack.
This reverts commit 242c3966 (add_custom_command: Diagnose
MAIN_DEPENDENCY limitation, 2015-03-09) and the follow up commit
b372a99a (UseSWIG: Do not use MAIN_DEPENDENCY on custom commands,
2015-03-26).
I misdiagnosed the underlying issue that prompted creation of policy CMP0057.
The actual issue surfaces when a single custom command's MAIN_DEPENDENCY
is listed in more than one target; this issue will have to be addressed
independently.
In commit 74de9a73 (cmGlobalGenerator: Delegate storage of enabled
languages to cmState, 2015-04-11) the original LanguageEnabled
member of cmGlobalGenerator was left behind by mistake. One use
of it in EnableLanguagesFromGenerator (for try_compile) was left,
but the member is not populated anymore. Drop the member and
teach EnableLanguagesFromGenerator to copy the list of enabled
languages from one cmState to the other.
Reported-by: Matt McCormick <matt.mccormick@kitware.com>
The purpose of the stack is to allow access only to the top of it. Access
to items which are not at the top is needed, so cmDefinitions objects
get a Parent pointer.
The existence of the Parent pointer is a workaround for the inappropriate
use of stack in the first place. Remove it now.
Construct the final list directly in a named return value. Use
a single set to track bindings already found.
Co-Author: Brad King <brad.king@kitware.com>
46f6a5f4 cmState: Store the Current directories.
3a041c59 Introduce cmState::Snapshot.
ae6c8a9d cmState: Store the Source and Binary directories.
86f3cd0f cmMakefile: Require the localGenerator in the constructor.
a48aebcb cmLocalGenerator: Require a parent in the constructor.
e4c78b37 cmMakefile: Inline SetHome* methods into last remaining caller.
410f39a4 cmMakefile: Delegate storage of Home dirs to the cmake class.
Create snapshots for buildsystem directories during configure time.
This class will be extended in follow up commits to snapshot
all values in the cmState.
Check that a non-optional file exists before attempting to include
it. This makes more sense than relying on an error case deeper
within cmListFileCache.
Use more reliable logic to detect if a path ends in ".framework". The
old logic added by commit v2.4.0~791 (add better support for framework
linking, 2005-12-26) did not account for paths not ending in it at all.
With a 9-character path the logic and "npos == -1" happens to make the
old check pass.
This is needed for 'mode_t', and on mingw-w64 in particular. We added
use of 'mode_t' in commit v3.2.0-rc1~421^2 (file(GENERATE): Use
permissions of input file if present, 2014-07-22).
8dc3a67c cmMakefile: Out-of-line the directory methods.
0f3c8cfa cmMakefile: Use method abstraction to access directories.
b288a997 cmMakefile: Rename SetStart* directory API to SetCurrent*.
932d53bc cmMakefile: Remove redundant method duplication.
32b8f03a cmMakefile: Port users of GetStart* methods to new names.
54d6a918 cmMakefile: Rename GetCurrent{Output,Binary}Directory.
55d80d0a cmMakefile: Rename GetCurrent{,Source}Directory.
b23cf06f cmake: Remove redundant start directories.
fcf246ac cmMakefile: Populate Home directories on initialize.
8878bea7 cmake: Initialize Home directories on cmake for find-package mode.
044dc815 Use the Home directories from the cmake class where intended.
d67e8f24 cmake: Fix directory used to find the cache
1ea085d1 cmMakefile: Initialize dir definitions early.
f034bb2f Remove redundant calls to MakeStartDirectoriesCurrent.
3a68c323 cmMakefile: Fix wrong parameter names.
The stderr may have warning messages. We should not treat these lines
as resource files. However, we must still recognize error message lines
for missing resource files that may be generated.
Extend the QtAutogen test to cover a generated resource as the only one
listed in a .qrc file. This causes 'rcc --list' to print a warning to
stderr that we now intend to ignore.
Preparation for per component variables.
Patch makes sure we know which variables
will be set for per component generator
and also prevents accidental overflows
of variable values between components.
They are maintained as containing the same content as the 'home'
directories, but they are never read from.
Fix some comments and help strings which confused the two by
name. They actually mean what is called CMAKE_SOURCE_DIR in
cmake code.
Extend the RunSingleCommand signature to capture stdout and stderr
separately. Allow both to be captured to the same std::string
to preserve existing behavior. Update all call sites to do this
so that this refactoring does not introduce functional changes.
66b641f4 Help: Add notes for topic 'add-GreenHills-MULTI-generator'
48004d9d Add a 'Green Hills MULTI' generator on Windows
051d8be1 cmLocalGenerator: Constify some cmTarget and cmGeneratorTarget arguments
6693590f Xcode: Refine quoting rules for Strings
a6331eb8 Xcode: Let PrintComment decide if the comment is non-empty
6e8952c1 Xcode: PrintComment will prepend a whitespace itself before the comment
4bd2544b Xcode: Do not add whitespace after attribute group opening brace
5cb4c838 Xcode: Properly indent PBXFileReference and PBXBuildFile
a723427b Xcode: Remove extra space in PBXProject comment
2fe8bca5 Xcode: Add comment after root object
2e0e205e Xcode: Indent using tabs
7b68c8df Xcode: Sort Xcode objects by Id
Green Hills MULTI is an IDE for embedded real-time systems. The IDE's
product page can be found here:
http://www.ghs.com/products/MULTI_IDE.html
It supports cross compiling on ARM, Intel x86, and other architectures
with various operating systems. The IDE exists on Linux and Windows
host systems, but CMake will currently only generate the project files
on Windows host systems.
Call the Internal method with equivalent parameters, passing a null first
argument.
A duplicate path computation exists inside the external_in condition now,
but that is harmless at this point.
Because all external callers of this method pass a null first
parameter, this change has no effect for them.
This also makes it obvious that the CMAKE_PARENT_LIST_FILE is set to
the name of the file being read itself for CMakeLists.txt files,
which may not make any sense.
This is a unique function call in CMake, and it was likely a
programming error when introduced. All other similar calls to
ReadListFile use a null first paramter.
The effect of this patch is to no-longer define CMAKE_PARENT_LIST_FILE
to the config file itself while evaluating it.
The ReadListFile method also no longer hits a condition that it uses
CollapseFullPath on the input file. However, as cpack does not
set the StartDirectory anyway, this has no effect. See bug 15522.
this patch series aims to minimize deltas between the CMake Xcode
generator and Xcode itself. It was started by the observation that
if one makes any change to the project within Xcode (e.g. to see
how a variable is called internally) the user cannot diff the CMake
project and the one stored by Xcode afterwards.
Xcode keeps the objects ordered by the object id.
Because cmake stores them into an unordered container
at creation time they must be sorted before writing the
pbxproj file.
I tested this series with Xcode 6.3 and Xcode 3.2. Both show a
reduced diff after this series was applied.
e8fdd5f1 QtAutogen: Workaround rcc CRCRLF newlines on Windows (#15459)
15f1a6b4 Tests/QtAutogen: Avoid touching files in the source tree
3f7c7c65 Tests/QtAutogen: Help Qt5Autogen test find Qt5 on Windows
26b5cc5e Tests/QtAutogen: Enable per-config source tests when possible
45566408 Tests/QtAutogen: Require CMake 3.1 to set policies everywhere
Refine logic added in commit 0ffd3534 (CPack single component packaging,
2015-04-02). Component packaging should be enabled if either at least
one component or one group is set and should not require both.
The 'rcc --list' operation may print newlines of the form CRCRLF,
so strip any trailing CR characters found on each line.
Update the Tests/QtAutogen test to use a resource named in a
subdirectory. This causes 'rcc --list' to display a blank line
and tests that it is correctly filtered out.
5d056c0d Port Global property interaction to cmState.
de722d7d Move property initialization to cmState.
9b5f80a8 Move global properties to cmState.
0076b5d8 cmake: Remove the happy global property scope pattern.
24b7f31d cmake: Remove unused cmCommand methods.
0aec4913 Port cmCommand consumers to cmState.
96f8c5f9 cmState: Move cmCommand-related methods from cmake class.
97e53ebb cmake: Simplify command clean up loop.
1e738bcf cmake: Simplify RemoveUnscriptableCommands algorithm.
62854e99 cmState: Move try_compile state from cmake class.
db8425be cmake: Get enabled languages from cmState.
74de9a73 cmGlobalGenerator: Delegate storage of enabled languages to cmState.
b159bff7 Move property definition to cmState.
Global properties are already global in scope, so remove the
overload for specifying it and port users of the API.
The call from cmMakefile::GetProperty can be simplified because
the scope is only used during chaining, and there is no further
chaining after processing global properties.
We never implemented them for VS 11 (2012), 12 (2013), or 14 (2015).
For VS 10 (2010) the reload macro does not work correctly when run from
inside a build launched through the IDE because stopping the build kills
the CMake that is driving the reload. Fortunately VS >= 10 know how to
reload the whole solution anyway.
At this point, it is an interface to the cache. It will be extended
to be a universal interface for access to and manipulation of
configuration-time data (defintions, properties on targets,
directories, source files etc).
This will allow porting all command implementations away
from the cmMakefile and cmTarget classes, and result in something
more-purely related to configuration-time processing of cmake
commands. That should serve at least the following goals:
* Split the CMake implementation more definitively into three
stages: Configuration, computation and generation, and be able to
implement each optimally for memory access patterns etc.
* Make better IDE integration possible by making more configuration
data available.
* Make it possiblte to use a smaller library than CMakeLib.a in
cpack and ctest, resulting in smaller executables.
* Make it possible to run the configure step multiple times in
the same CMake run (#14539).
Manage its lifetime in the cmake class, and add a convenience accessor
to cmMakefile.
07d44d63 cmake: Remove confusing duplication.
ea819b29 cmMakefile: Remove unused method.
6ad86c7f cmMakefile: Remove bad comment.
fca2b542 cmMakefile: Internalize setting of CMakeInstance on Properties.
7bb4e3db cmMakefile: Out-of-line Home directory accessors.
6241253a cmake: Out-of-line Home and Start directory methods.
0ee3ccb3 cmake: Fix variable name bugs.
57dd094e Use vector, not list for cmCommand storage.
6deb43e6 Remove some files which do not need to be in BootstrapCommands.
ecdb1b3b Add some missing includes.
04b307b9 cmake: Simplify CommandExists method.
0f1f324b cmake: Rename oddly named variables.
275185ac cmake: Constify GetCommand method.
c57f086a cmake: Don't lower-case a string needlessly.
23368c9b cmake: Use make_pair instead of Foo::value_type.
14c70b8c cmake: out-of-line try compile state methods.
...
9660a3cc Makefile: Fix multiple custom command outputs with one missing
5c08e255 KWSys SystemTools: Teach Touch with !create to succeed on missing file
6a661f0603 fixed the
locale used for message output but at the same time broke the locale
used for filename encodings.
This commit preserves LC_CTYPE in the presence of LC_ALL.
The use of "cmake -E touch_nocreate" added in commit v3.2.1~4^2
(Makefile: Fix multiple custom command outputs regression, 2015-03-06)
caused builds to fail when one of the outputs is intentionally not
created. This was fixed by our parent commit by making touch_nocreate
succeed when the file is missing. Add a test case covering it.
For the Watcom WMake generator, check for the SYMBOLIC source file
property separately on each output. The mark is needed on outputs that
are not really created to tell 'wmake' not to complain that it is
missing. The mark is also needed on outputs that are created or 'wmake'
will not consider them out of date when they exist.
Inspired-by: Ben Boeckel <ben.boeckel@kitware.com>
ba404938 cmCacheManager: Port consumers to non-iterator API.
f3922a9a Port QtDialog to non-iterator cache API.
3e6a76e4 Port CursesDialog to non-iterator cache API.
9e641567 cmMakefile: Port away from CacheEntry.Initialized.
1e2dbfce cmCacheManager: Add non-iterator-based API.
60a62a91 cmCacheManager: Return a C string from GetValue.
77f2807c cmCacheManager: Rename GetCacheValue to GetInitializedCacheValue.
14973054 Add API for cache loading, deleting and saving to the cmake class.
1f2c12eb cmMakefile: Remove cache version accessors.
97c50a8d cmMakefile: Simplify GetDefinitions implementation.
882f48e5 Link libraries by full path even in implicit directories
318cd370 Help: Add link target for Find Modules section of cmake-developer.7
1535dcd8 Tests: Teach RunCMake to optionally merge command output to stdout
When CMP0003 was first introduced we wanted to link all libraries by
full path. However, some projects had problems on platforms where
find_library would find /usr/lib/libfoo.so when the project really
wanted to link to /usr/lib/<arch>/libfoo.so and had been working by
accident because pre-CMP0003 behavior used -lfoo to link.
We first tried to address that in commit v2.6.0~440 (Teach find_library
to avoid returning library paths in system directories, 2008-01-23) by
returning just "foo" for libraries in implicit link directories. This
caused problems for projects expecting find_library to always return a
full path. We ended up using the solution in commit v2.6.0~366 (...
switch library paths found in implicit link directories to use -l,
2008-01-31). However, the special case for libraries in implicit link
directories has also proven problematic and confusing.
Introduce policy CMP0060 to switch to linking all libraries by full path
even if they are in implicit link directories. Explain in the policy
documentation the factors that led to the original approach and now to
this approach.
This is for consistency with other CMake access interfaces such as
definitions and properties which use a null value as a 'not present'
value. It is source compatible with existing callers, and it returns
a pointer into actual real cache entry storage.
Prefix test commands with the CROSSCOMPILING_EMULATOR property
for target executables. This allows test suites to be run on the host
when crosscompiling.
If the CMAKE_CROSSCOMPILING_EMULATOR variable is defined, and
CMAKE_CROSSCOMPILING is TRUE, then use CMAKE_CROSSCOMPILING_EMULATOR to run
the try_run executables. This prevents the need to populate
TryRunResults.cmake when cross compiling.
This topic was never tested without some follow-up commits. The
GetCacheEntryValue API returns a pointer to memory freed on return.
It will have to be revised along with the rest of the original topic.
* Re-order VS generators from newest to oldest.
* Show how to specify a VS generator with a target platform
* Increase the option output indentation to avoid extra wrapping
with longer generator names.
9410e24a cmCacheManager: Port consumers to non-iterator API.
7b7ae3b1 Port QtDialog to non-iterator cache API.
228c629c Port CursesDialog to non-iterator cache API.
2e50f5e7 cmMakefile: Port away from CacheEntry.Initialized.
e6224367 cmCacheManager: Add non-iterator-based API.
9ada4c04 cmCacheManager: Rename GetCacheValue to GetInitializedCacheValue.
1fe7f24c Add API for cache loading, deleting and saving to the cmake class.
08c642c6 cmMakefile: Remove cache version accessors.
cec8f97e cmMakefile: Simplify GetDefinitions implementation.
Add CROSSCOMPILING_EMULATOR target property for executables. This is used by
subsequent patches to run exectuables created for the target system when
crosscompiling. The property is initialized by the
CMAKE_CROSSCOMPILING_EMULATOR variable when defined.
c37cf7fa cmCacheManager: Remove unused method
64556e3d cmCacheManager: Remove unused overloads.
23bb5d22 cmCacheManager: Remove use of intermediate overload.
510562e3 cmGlobalGenerator: Don't fetch the cache manager in a loop.
629e9489 cmake: Clear member rather than explicit erase.
d280bae9 cmake: Be clear that there is no chaining after global properties.
364c7ea1 cmake: Remove unused method.
47acfe1d cmake: Remove unused member.
a469bf7b cmMakefile: Remove one wrong and one insufficiently helpful comment.
257c1649 cmListFile: Remove unused member.
fe17092c cmMakefile: Remove bogus comment.
199b28ac Remove duplicate tag name.
RPM, DEB and archive packages were not created
in cases when CPACK_<generator>_COMPONENT_INSTALL
was set to ON and a single component existed.
Patch also changes CPackRPM test to implicitly
test for this case.
XAML files are by default of type Page in the vcxproj and can be
overriden by setting the VS_XAML_TYPE property. The .cpp and .h file
of the same name are automatically added as depending on the XAML file.
New VSXaml test builds a basic XAML WindowsStore 8.1 app with VS2013.
Otherwise an #include directive on the first line of a source file is
ignored if the file contains a Byte-Order-Mark.
Suggested-by: Aleksey Konovalov <konovalov.aleks@gmail.com>
Add policy CMP0059 to cover this change. The property has been
deprecated since CMake 2.4 anyway.
This will help clean up cmMakefile -- the DefineFlagsOrig member should
not need to exist.
In cpack we load the platform information modules to give the
configuration scripts access to the host system information.
CYGWIN.cmake warns unless we explicitly tell it not to warn
since there is no chance for a cmake_minimum_required(VERSION)
to be called.
The CMAKE_MAKE_PROGRAM selected by CMake while configuring the project
should also be used to drive the "preinstall" target during packaging.
Teach CPack to use "cmake --build" instead of constructing the build
command line itself. The "cmake --build" command already knows how
to select the proper make tool.
Add .DELETE_ON_ERROR to the "build.make" files that contain the actual
build rules that generate files. This tells GNU make to delete the
output of a rule if the recipe modifies the output but returns failure.
This is particularly useful for custom commands that use shell
redirection to produce a file.
Do not add .DELETE_ON_ERROR for Borland or Watcom make tools because
they may not tolerate it and would not honor it anyway. Other make
tools that do not understand .DELETE_ON_ERROR will not be hurt.
Suggested-by: Andrey Vihrov <andrey.vihrov@gmail.com>
Revert commit v3.0.0-rc1~175^2~20 (add_dependencies: Disallow use with
INTERFACE_LIBRARY, 2013-12-25). Teach our dependency analysis to
transitively follow INTERFACE target utility dependencies as was done or
IMPORTED targets in commit v2.8.6~127^2~1 (Allow add_dependencies() on
imported targets, 2010-11-19). Extend the InterfaceLibrary test with a
case to cover header generation for a header-only INTERFACE library via
a custom target.
The rcc outputs are byproducts of the cmake_autogen rule, not outputs.
We still must run cmake_autogen on every run even if the rcc outputs
exist. Ninja requires explicit byproduct specification, which is now
possible in CMake since commit v3.2.0-rc1~340^2~2 (Add an option for
explicit BYPRODUCTS of custom commands, 2014-11-13). Revise the logic
introduced by commit v3.2.0-rc1~480^2 (QtAutogen: Regenerate qrc files
if their input changes, 2014-09-17) to specify byproducts explicitly.
Teach the Xcode generator that ONLY_ACTIVE_ARCH=YES means to use ARCHS,
and that the default of ONLY_ACTIVE_ARCH=NO means to use NATIVE_ARCH and
ignore ARCHS. In the latter case there is no reason to generate ARCHS.
"XML_Parser" in cmexpat is a typedef for void* while newer releases of
expat seem to use struct XML_ParserStruct *XML_Parser.
Add static_casts so that the build works with either variant.
The file lock functionality added in commit v3.2.0-rc1~297^2~1 (file:
Add LOCK subcommand to do file and directory locking, 2014-11-26) forgot
to close the lock file descriptors. Eventually it was possible to run
out of file descriptors and locks could not longer be acquired. Fix
this by closing the file descriptor or handle when we are done with it.
Also set the member back to the initial value from the constructor
to leave everything in a consistent state (useful for debugging).
Co-Author: Ruslan Baratov <ruslan_baratov@yahoo.com>
bd9c7f9b Ninja: Add policy to require explicit custom command byproducts
ed8e30b0 cmGlobalNinjaGenerator: Optimize handling of known build outputs
ad094f43 cmGlobalNinjaGenerator: Fix spelling of "unknown"
82a37d3c cmGlobalNinjaGenerator: Drop unused member
4178cd88 Help: Add notes for topic 'xcode-xctest'
87a4b858 Tests: Add XCTest example to test Frameworks and Cocoa App Bundles
ba14510b OS X: Add FindXCTest module
3714955b OS X: Add handling for XCTest bundles
54a5cdbb Tests: Compute Xcode version for any generator on OS X
Add policy CMP0058 to avoid generating 'phony' ninja rules for unknown
custom command dependencies. This requires projects to specify their
custom command byproducts explicitly. With this requirement we no
longer have to assume that unknown custom command dependencies are
generated and can instead simply assume they are source files expected
to exist when the build starts. This is particularly important in
in-source builds. It is also helpful for out-of-source builds to allow
Ninja to diagnose missing files before running custom command rules that
depend on them.
Teach WriteUnknownExplicitDependencies to take ownership of the set of
WriteBuild outputs immediately since no other methods need the data.
This avoids re-inserting the whole set into another already populated
set.
GLOB lists directories by default and GLOB_RECURSE does not.
LIST_DIRECTORIES enables user to control the behavior explicitly for
consistently for both GLOB and GLOB_RECURSE.
The phony rules added by commit v2.8.12~248^2 (Ninja: Custom Command
file depends don't need to exist before building, 2013-06-07) are
circular, e.g.
build side-effect: phony side-effect
This is not diagnosed by Ninja as of version 1.5, but the dependency
does not make sense. Simply drop it and use phony rules of the form
build side-effect: phony
instead.
Reported-by: Daniel Dunbar
Any environment vars that were configured for a test via the
ENVIRONMENT property will now be output when the test is run
with verbose logging enabled.
ec428faf Genex: Extend cmGeneratorExpressionContext constructor.
082b6a9d Genex: Split cmGeneratorExpressionContext into own file.
9df1f0fc Genex: Split cmGeneratorExpressionNode into own file.
80b9f0cb Genex: Extract an evaluateWithContext method.
642048ce Help: Move docs of $<0:...> and $<1:...> to output section.
8701a3f4 cmRemoveDuplicates: Partially specialize the API for pointer types.
eec7091d cmRemoveDuplicates: Type-parameterize all uniq-operations
7cbafa8c cmRemoveDuplicates: Store unique iterators instead of values.
95dd238f cmRemoveDuplicates: Fix iterator -> const_iterator.
4448f175 cmInstalledFile: Move Property implementation out of line.
7916d7ba Include cmAlgorithms where it is used.
If de-duplicating a container of pointers, there is no need to
store iterators to them, as that is just more 'pointer chasing'.
Store the pointers themselves and use API which compares the pointers
in the specialization.
There is no need to copy all of the values in the container in
order to determine uniqueness. Iterators can be stored instead
and can be used with standard algorithms with custom comparison
methods.
This also means that we use less space in case the value_type size
is greater than sizeof(iterator). That is common for std::string
which may require up to 32 bytes (libstdc++ 5.0 and MSVC at least).
With libstdc++ 4.9 and older, std::string is 8 bytes, so we likely
don't gain anything here.
Inspired-by: Daniel Pfeifer <daniel@pfeifer-mail.de>
232a6883 Help: Add release notes for target-language-genex.
9e168941 File(GENERATE): Process genex evaluation files for each language.
b734fa44 Genex: Allow COMPILE_LANGUAGE when processing include directories.
0b945ea9 Genex: Allow COMPILE_LANGUAGE when processing compile definitions.
5c559f11 Genex: Enable use of COMPILE_LANGUAGE for compile options.
e387ce7d Genex: Add a COMPILE_LANGUAGE generator expression.
4a0128f4 VS6: Compute CMAKE_*_FLAGS and COMPILE_DEFINITIONS* only when needed
VCExpress does not produce output if its pipes are connected to
an interactive terminal. Add a special case to 'cmake --build'
to capture the output through a pipe and re-print it instead of
sharing output pipes with VCExpress.
Due to a difference in how AdditionalOptions are implemented in the
Fortran component of VS and the C/C++ component, flags that are not
listed in the flag table are at risk of being overwritten.
The unknown argument warning added by commit v3.2.0-rc1~452^2
(configure_file: Warn about unknown arguments, 2014-10-31) failed to
account for options handled by the NewLineStyle member instead of
directly in the main loop. Simply whitelist them for now.
In commit v3.2.0-rc1~272^2~2 (Makefile: Fix rebuild with multiple custom
command outputs, 2014-12-05) we changed the generated makefile pattern
for multiple outputs from
out1: depends...
commands...
out2: out1
to
out1 out2: depends...
commands...
This was based on the incorrect assumption that make tools would treat
this as a combined output rule and run the command(s) exactly once for
them. It turns out that instead this new pattern is equivalent to
out1: depends...
commands...
out2: depends...
commands...
so the commands may be run more than once.
Some documents suggest using a "dedicated witness" stamp file:
stamp: depends...
rm -f stamp
touch stamp.tmp
commands...
mv stamp.tmp stamp
out1 out2: stamp
However, if the commands fail the error message will refer to the stamp
instead of any of the real outputs, which may be confusing to readers.
Also, this approach seems to have the same behavior of the original
approach that motiviated the above commit: multiple invocations are
needed to bring consumers of the outputs up to date.
Instead we can return to the original approach but add an explicit
touch to each extra output rule:
out1: depends...
commands...
out2: out1
touch -c out2
This causes make tools to recognize that all outputs have changed and
therefore to execute any commands that consume them.
Preserve all but the last extension when generating .wixobj output
filenames from source files and make sure they are unique.
Output .wixobj files in cpack staging area instead
of the current working directory.
Rename the example jacoco.xml file to be jacoco.xml.in to stop CMake
from apptempting to calculate Jacoco Coverage when running over itself.
Enclose a push of -1 to the coverage vector to only happen if there is a
fin to calculate for. This prevents a crash if the target file doesn't
exist.
This should allow the consuming IDE to determine which target specific
preprocessor definitions and include directories are relevant for a
given source file.
This fixes RunCMake.(Configure|configure_file|try_compile) test
failures that failed to match empty stderr due to jom printing
its identification line.
d1082448 Tests: Extend RunCMake.CommandLine to cover 'cmake --build' for 'ninja -v'
ce935ebe cmake: Teach --build to honor CMAKE_VERBOSE_MAKEFILE for Ninja
A more-specific error message is always displayed earlier in the
output if any real error occurred. This final summary message
is distracting to readers searching through the output for the
word "error". Simply drop it.
The Ninja build system does not support a in-file verbositiy switch.
Instead teach 'cmake --build' to extract the CMAKE_VERBOSE_MAKEFILE
setting and pass it as an optional '-v' argument to Ninja. This can
serve as a reasonable fallback.
Signed-off-by: Gregor Jasny <gjasny@googlemail.com>
Revert commit v3.2.0-rc1~165^2 (Encoding: Write Visual Studio solution
file with BOM, 2014-12-26). The BOM breaks the VS IDE version selector
when loading the .sln from Windows Explorer.
47c2da6a cmAlgorithms: Cache the end iterators in algorithms.
a5b10ae6 cmAlgorithms: Remove needless assignment.
7fd8557f cmAlgorithms: Maintain the pivot iterator in cmRemoveIndices.
1f796791 cmAlgorithms: Relax iterator requirement for cmRemoveIndices.
ba959934 cmAlgorithms: Make cmRemoveDuplicates work with more containers.
cae45df7 cmAlgorithms: Rename template argument to RemoveN.
b917f4c0 cmAlgorithms: Relax cmRemoveN requirement to FwdIter.
bbc1a978 cmAlgorithms: Add a size() to cmRange.
47a3e22e cmAlgorithms: Rename template type in cmDeleteAll algorithm.
cb75eec0 cmAlgorithms: Add const to const objects.
Generate the OutputDirectory element value as an absolute path
to the same location as the existing relative path. Somehow
this addresses an occasional failure in a large/complex build,
and should not hurt basic use cases.
Shorten the CFBundleExecutable in the PList file of Bundles to
the file name only as it is done for Frameworks, too.
Signed-off-by: Gregor Jasny <gjasny@googlemail.com>
6cc01c14 CPackWIX: Add release notes for the wix-shortcut-properties topic.
135febf0 CPackWIX: Enhance CMake CPack WIX generated installer.
e6731f48 CPackWIX: Add new CPACK_STARTUP_SHORTCUTS property.
279605f5 CPackWIX: Add installed file properties for the creation of shortcuts.
53d7daff CPackWIX: Refactor start menu and desktop shortcut creation.
dc0f3fb4 CPackWIX: Explicitly list CPack WIX headers for IDE convenience.
c021f59c cmMakefile: Store macro list in a vector not in a map.
2d130896 cmMakefile: Fix list of macros generation.
f1969234 cmFunctionCommand: Remove ineffectual code.
1116698a cmTarget: Don't needlessly clear vectors in the destructor.
bb9d71b4 Replace loops with algorithms.
4afe6c26 cmAlgorithms: Add cmReverseRange adaptor.
a3a0a8c2 cmAlgorithms: Add cmFindNot algorithm.
8c74a41f cmRST: Replace two erase with a rotate and larger erase.
61fe1919 cmAlgorithms: Update concept requirement to FowardIterator
09d6125b cmAlgorithms: Move cmRotate out of 'implementation detail' namespace.
8ed6ecac cmRST: Move two algorithms beside each other.
dfe49c20 cmRST: Use std::min where appropriate.
21b0654a cmGlobalGenerator: Convert set insert algorithm to vector algorithms.
416df93a Convert some raw loops to cmWrap.
37b88d34 cmAlgorithms: Add cmWrap.
a2818093 Use cmJoin where possible.
76207b08 cmCacheManager: Replace loop with algorithm.
60c3bb73 cmGlobalGenerator: Replace loop with algorithm.
05fec779 cmTarget: Port loop to algorithm.
9c225767 cmGlobalGenerator: Replace set::insert algorithm with cmRemoveDuplicates.
...
cmCTestOptionalLog takes a boolean argument that indicates
whether or not the message should be suppressed. Note that
error messages will still be printed, even if suppression is
requested. This macro will allow us to provide more
fine-grained control over what messages CTest prints to the
console.
Port some existing cmJoin to use it.
cmJoin is cumbersome to use in cases where the objective is to
somehow 'quote' each item and then join it with a separator. In that
case, the joiner string is harder to read and reason about. cmWrap
aims to solve that.
Provide an overload taking char wrappers to simplify the case
of surrounding every element in quotes without needing to escape
the quote character.
Since jsoncpp 0.7.0 (2014-11-20) the upstream may provide a CMake
package configuration file such that find_package(jsoncpp) will find a
jsoncppConfig.cmake file. In order to avoid conflicting with this
(especially on case-insensitive filesystems), and since we always prefer
projects to provide package config files (that they maintain), it is
better to not provide FindJsonCpp publicly.
Move FindJsonCpp into a private source directory that is not installed
so that we can still use it for building CMake itself.
Reported-by: Ryan Pavlik <ryan.pavlik@gmail.com>
The find_package command already knows how to compute installation
prefixes from PATH. Use the same approach to establish prefixes for
find_library, find_file, and find_path to use to look in directories
like "<prefix>/lib[/<arch>]" and "<prefix>/include" for libraries and
headers. This will reduce the amount of configuration end users need to
do to establish a work environment rooted under a specific prefix.
At the start of each configure step we already reset the generator
selection (CMAKE_GENERATOR) to match that loaded for the current
project. Add missing code to reset the generator platform and toolset
(CMAKE_GENERATOR_PLATFORM and CMAKE_GENERATOR_TOOLSET) also so that they
do not leak across projects.
6652afe6 CTest: Use clear instead of erase-all.
75661fdf cmListCommand: Move size variable out of loop.
10e53e23 cmAlgorithms: Add missing const to functors.
74906322 cmAlgorithms: Remove sort of already-sorted container.
2acd04c9 cmcmd: Remove some comment copy-pasta.
2d833232 cmCoreTryCompile: Remove variable assignment.
26602cf5 cmLocalGenerator: Move variable population inside of condition.
cfb84834 Update comment to match recent dashboard testing.
6010f936 Revert "cmGlobalGenerator: Fix value type pushed into autogens vector"
0550b9e3 Revert "Attempt to fix the compile of cmake on Sun CC."
1ee4721f Help: Fix formatting of command parameter.
62429a1e cmGlobalGenerator: Remove unneeded pointer check.
c697c1fa cmTarget: Remove template argument workaround.
This reverts commit ae6fc555a7.
Use the more-natural make_pair algorithm. The compiler motivating
the need for this is not supported as a host anymore.
Pre-C++98 compilers required that the template argument be
used in the function parameters. Those compilers are no longer
supported as hosts, so drop the workaround.
Teach cmLocalVisualStudio7Generator to set 'OutputDirectory' using the
same method as is used to set the 'OutputFile' in the generated project
file. Also, OutputDirectory only needs to be set for targets that run the
linker or librarian. These two changes make the VS 7 OutputDirectory
consistent with what cmVisualStudio10TargetGenerator generates for OutDir.
Without this, since the VS Intel Fortran plugin for VS >= 10 still uses
the VS 7 .vfproj file format, when executing test VSGNUFortran using
Intel Fortran Compiler 15.xx, the following warning is issued just
before compilation:
TargetPath(...) does not match the Linker's OutputFile property value (...).
This may cause your project to build incorrectly.
To correct this, please make sure that $(OutDir), $(TargetName) and $(TargetExt)
property values match the value specified in %(Link.OutputFile).
Subsequently, an error is reported during linking.
Inspired-by: Vincent Newsum <vynewsum@gmail.com>
This will allow us to use a value other than just the config name
for the project OutputDirectory setting used for $(OutDir).
Also use $(ConfigurationName) instead of $(OutDir) for the link
directory configuration suffix since that is a hard-coded instance of
a use case for CMAKE_CFG_INTDIR.
The entire vector will be destroyed at once at the end of the scope,
and the remove algorithms already give us the end of the range of
interesting values, so just use those sentinals.
Start by creating a vector to hold a unique values of the input range. We
expect that in most cases, there will be relatively few duplicates, so
reserving enough memory for a complete copy is worthwhile. Unlike a solution
involving a std::set, this algorithm allocates all the memory it needs
in one go and in one place, so it is more cache friendly.
Populate the unique copy with a lower_bound insert algorithm and record the
indices of duplicates. This is the same complexity as the std::set insert
algorithm, but without the need to allocate memory on the heap and other
disadvantages of std::set.
Remove the duplicates with the cmRemoveIndices algorithm.
Implement ContainerAlgorithms::RemoveN to remove N elements to the
end of a container by rotating. The rotate is implemented in terms
of the efficient swap algorithm, optimized even more in the standard
library implementation when the compiler supports the rvalue-references
feature to move elements. Implement cmRemoveN with a Range API
for completeness.
std::rotate in C++11 is specified to return an iterator, but
c++98 specifies it to return void. libstdc++ 5.0 will be the first
version to have the correct return type. Implement
ContainerAlgorithms::Rotate in terms of std::rotate and return the
correct iterator from it. While std::rotate requires forward iterators,
this workaround means cmRotate requires bidirectional iterators. As
most of CMake uses random access iterators anyway, this should not
be a problem.
Implement cmRemoveIndices in terms of the RemoveN algorithm, such
that each element which is not removed is rotated only once. This
can not use the cmRemoveN range-API algorithm because that would
require creating a new range, but the range must be taken by reference
and so it can't be a temporary.
These remove algorithms are not part of the STL and I couldn't find them
anywhere else either.
Use a ostringstream to account for the input being a variable of type
size_t as a result of using std::distance. There is no single
format string which portably accepts a size_t.
b5f98e50 cmMacroCommand: Manipulate target string directly.
83414d5a cmMacroCommand: Move computation of ARGV%n names out of double loop.
9a1f8f35 cmMacroCommand: Move ARGV replacement out of condition.
4aa7bd2a cmMacroCommand: Remove condition around ARGN replacement.
6774c92b cmMacroCommand: Declare tmps in the scope that it's used.
2c4a7298 cmMacroCommand: Declare arg in the scope that it is used.
a551851a cmMacroCommand: Inline variable computation.
f79c0f76 cmMacroCommand: Compute variables outside of two loops.
8e0827b6 cmMacroCommand: Remove intermediate arg variables.
f2c49f59 cmMacroCommand: Remove condition around ARGN computation.
3250a7e5 cmMacroCommand: Remove conditional append of semicolon.
081a13f7 cmMacroCommand: Declare arg variables where used and initialized.
17b5ebd3 cmMacroCommand: Join the args strings outside of the loops.
7c3f6376 Convert loop into two algorithms.
8a399c8c Convert loop to the common pattern.
abfca975 Move loop inside of condition.
0b61b86d Handle last element outside of the loop.
e21f7829 cmTarget: Use a sorted vector in place of a set.
559dc155 cmSet: Replace loop with cmJoin.
0ea71932 cmFindBase: Replace loop with cmJoin on range.
9380e85f Convert loops to cmJoin algorithm with cmRange.
bb10012f cmStringCommand: Accumulate with cmJoin and range adaptors.
0c12f1ea cmAlgorithms: Add a range adaptor and API for adjusting a range.
27c6f017 Use cmJoin to accumulate string ranges.
4e78ebbd cmAlgorithms: Add a Range container and adaptor method.
89102249 Replace common loop pattern with cmJoin
7b8725bf Convert loops populating maybe-empty content into the common pattern.
7ee56f03 Convert loops into the commonly used pattern.
0a4e5674 cmMacroCommand: Remove counting variable.
...
f30022eb install: Allow generator expressions in TARGETS DESTINATION (#14317)
7607c3d1 cmInstallGenerator: Pass destination explicitly to AddInstallRule
ebd556ca cmInstallGenerator: Fix check for absolute install destinations
290ca8e2 cmInstallGenerator: Refactor computation of absolute install dest
f99991db cmInstallGenerator: Move GetDestination to subclasses that need it
It can make sense to declare objects outside of loops if
the size required by the object can grow (eg std::string when
using getline), but that is not the case here.
Avoid using the std::accumulate algorithm which is designed for
numeric types, not complex types. It introduces unneccessary
copies.
Initialize variables where they are populated.
This can make a pair of iterators API compatible with the
cmJoin algorithm and other range-based algorithms.
Accept different iterator types in the cmRange adaptor so that
a const and non-const iterator are accepted.
This will allow per-config destinations for targets in EXPORT sets.
Using multiple install(TARGETS) with separate CONFIGURATIONS is
rejected as a target appearing more than once in an export set.
Now instead one can write
install(TARGETS foo EXPORT exp DESTINATION lib/$<CONFIG>)
to get a single logical membership of the target in the export set
while still having a per-config destination.
In AddInstallRule, check for absolute install destinations before
converting to the absolute install destination. Previously this
worked only by accident because literal "${CMAKE_INSTALL_PREFIX}"
looks like a relative path.
Replace the GetInstallDestination method, which looked up the
Destination ivar, with a new ConvertToAbsoluteDestination method that
takes the nominal destination as an argument. Update call sites
accordingly. This will allow some clients to transform the install
destination before calling the method.
f7e33820 Add release notes for export-interface-source-files.
6da65b39 Allow export of targets with INTERFACE_SOURCES.
736bcb96 Tests: Move IfacePaths test stderr files.
d9f8390d Tests: Run IfacePaths tests with a parameter.
cc152094 Tests: Split part of include_directories test to a generic location.
Since commit v2.8.8~176^2 (try_compile: Use random executable file name,
2012-02-13) the length of the test executable name in generated
try_compile projects has been longer and unpredictable. With Visual
Studio on windows, the tools try to create paths like:
CMakeFiles/CMakeTmp/$tgt.dir/Debug/$tgt.tlog/$tgt.lastbuildstate
With the target name repeated up to 3 times, we must make it short and
of consistent length to avoid overrunning the 260 character limit
imposed by VS tools.
d8639733 cmSystemTools: Remove unnecessary comparison.
803317aa cmSystemTools: Early return if size makes later comparison false.
11093a03 Replace temporary bool by inlining warning condition.
6cd2ee95 Replace loop with member algorithm.
94e993a0 cmComputeLinkDepends: Remove temporary iterator copy.
69dbe51b Replace loop with algorithm.
683fafea Replace a loop with std::transform.
63f584b6 Replace while loop with member insert.
74c4d9d2 Take a size check outside of an inner loop.
71d47115 Use insert member instead of back_inserter.
39622c99 Convert while loop to member insert.
a7fcc148 Convert loop to algorithm.
d46c4f07 Extract a prefix variable from loop.
d59913f0 Take computation out of loop.
3f3db744 cmMakefile: Remove ExpandSourceListArguments.
bd990c80 Remove use of ExpandSourceListArguments.
...
63668954 Help: Add notes for topic 'makefile-progress-improvements'
ae775fe8 Makefile: Change link step message color to bold green
7bb50e4a Makefile: Add progress to link step messages
c6ada827 Makefile: Print all color escape sequences before newline
8521fdf5 Makefile: Fix output during parallel builds (#12991)
69ac6d27 bootstrap: Enable color Makefile output
0f870234 Merge branch 'backport-no-global-setlocale' into no-global-setlocale
cd408d93 Add setlocale() calls around use of libarchive APIs (#14934, #15377)
87be2e14 Do not call setlocale() globally in CMake applications (#15377)
The libarchive APIs use nl_langinfo(CODESET) for iconv so they need the
locale to be set for LC_CTYPE. However, the rest of CMake does not
define any behavior for non-ASCII character classification/conversion so
we do not want to setlocale() globally. Add a RAII class to save, set,
and restore the locale around calls to libarchive APIs.
Inspired-by: Clinton Stimpson <clinton@elemtech.com>
Revert the changes made by commit v3.1.0-rc1~406^2~1 (Encoding: Add
setlocale() to applications, 2014-05-30) and commit v3.1.0-rc1~406^2
(Encoding: Change to only set LC_CTYPE, 2014-06-11), and other setlocale
calls added later in their spirit. CMake has not been taught how to
deal with non-C locales everywhere. We do not define any functionality
for character conversions for non-ASCII strings. Another solution will
be needed to address the original problem motivating addition of
setlocale() calls.
Replace use of separate "cmake -E cmake_progress_report" and "cmake -E
cmake_echo_color" commands to report the progress and message portions
of build output lines with --progress-* options to the latter to print
everything with a single command. The line buffering of the stdout FILE
stream should cause the whole line to be printed with one atomic write.
This will avoid inter-mixing of line-wise messages from different
processes during a parallel build.
The CMAKE_<LANG>_STANDARD_DEFAULT variable indicates whether the
compiler has any notion of standard levels and that CMake knows
about them. If no language standard levels are available, skip
all logic to attempt to add a flag for the level.
Also fail with an internal error if a bad default value is set.
The refactoring in commit v3.1.0-rc1~812^2~16 (stringapi: Pass
configuration names as strings, 2014-02-09) broke the code path in
cmLocalGenerator::GenerateInstallRules that intends to pick a default
install configuration for multi-config generators. Fix the logic to
select an empty default configuration only when using a single-config
generator whose CMAKE_BUILD_TYPE is not set.
Inspired-by: Roman Wüger <roman.wueger@gmx.at>
Reported-by: NoRulez <norulez@me.com>
Stephen Kelly
Brad King
Kitware Robot
Konstantin Podsvirov
Thomas Herz
Robert Goulet
Nils Gladitz
Raffi Enficiaud
Domen Vrankar
Geoff Viola
Gregor Jasny
Gerald Combs
Matt McCormick
Gilles Khouzam
Sean James
Clinton Stimpson
Bill Hoffman
Betsy McPhail
André Klitzing
Justin Borodinsky
Stanislav Ionascu
Zach Mullen
Oyvind Jensen
Joseph Snyder
Paul Martin
Zack Galbreath
Tim Blechmann
Rolf Eike Beer
Ben Boeckel