The PGI compilers on Linux do not have the -fPIE flag. Remove the table
entry added by commit v2.8.9~125^2~2 (Add platform variables for
position independent code flags, 2012-05-05), which likely included it
only as part of a sweeping introduction of such flags.
In Platform/Windows-MSVC the C and CXX flags are initialized to
contain preprocessor definitions describing the platform. On
WinCE platforms this may not be just -DWIN32. This information
may be important to RC sources too, so add such preprocessor
definitions to the default RC flags.
Suggested-by: Gunnar Roth <gunnar.roth@gmx.de>
The RC language is special in that it is automatically enabled
on Windows-based platforms when another primary language is
enabled. Move enablement of RC from early in the enablement
of the other language to late. This will allow it to use
information detected as part of enabling C, CXX, or Fortran.
3d612c73 MSVC: Compile with arch-specific flags on ARM platforms (#14552)
886dcaa7 MSVC: Distinguish among ARM architectures more precisely (#14552)
ea986676 MSVC: Define /DWINCE when building for WinCE platforms (#14552)
Otherwise find_library is unable to lookup the XCTest framework which
is not located in the SDK serach path:
In the 10.10 SDK the SDK frameworks are located here:
$DEVELOPER_DIR/Platforms/MacOSX.platform/Developer/SDKs/MacOSX10.10.sdk/System/Library/Frameworks
whereas the Platform SDKs are located here:
$DEVELOPER_DIR/Platforms/MacOSX.platform/Developer/Library/Frameworks
Signed-off-by: Gregor Jasny <gjasny@googlemail.com>
Initialize CMAKE_SHARED_LINKER_FLAGS_RELWITHDEBINFO_INIT from the value
of CMAKE_EXE_LINKER_FLAGS_RELWITHDEBINFO_INIT rather than the one for
the DEBUG configuration. This typo has been present since the logic was
first added in commit 36db45082e (ENH: fix up several problems with new
stuff, 2002-11-11).
Reported-by: Gunnar Roth <gunnar.roth@gmx.de>
Revert commits:
2d738ce3 Help: Add notes for topic 'feature_record_msvc'
f73718c9 Features: Enable writing of MSVC compiler feature header.
64c30bdc Features: Record for MSVC C++ 2015 and MSVC C 2010-2015.
225c0ef8 Features: Record for MSVC 2010-2013.
This topic was merged to master prematurely, so remove it.
Initializer lists are only properly supported in 2015 and above.
Previous Visual Studio releases said they supported initializer lists
but silently produced bad code.
Cleanup of Windows-wcl386.cmake in commit v3.1.0-rc1~693^2 (Watcom:
Cleanup Windows-wcl386 configuration, 2014-04-01) also introduced use of
the 'symfile' link option but did not mention it in the commit message.
There is no way to set the symbol file name of a target, so it is better
to revert that change. It is easy to run 'wstrip *' if the symbols need
to be stripped, but it is very difficult to get the right names for the
.sym files to install with debug/rel_with_deb_info configurations.
When testing CMAKE_<LANG>_COMPILER_ID values, do not explicitly
dereference or quote the variable. We want if() to auto-dereference the
variable and not its value. Also replace MATCHES with STREQUAL where
equivalent.
Nsight Tegra Visual Studio Edition handles prefixing of library names
with '-l' automatically, so teach the generator not to do so.
Reported-by: Mourad Boufarguine <mourad@boufarguine.name>
Simply include the "Windows" platform equivalents. This will allow
-DCMAKE_SYSTEM_NAME=WindowsPhone or -DCMAKE_SYSTEM_NAME=WindowsStore to
select variants of the Windows platform while re-using most of the
platform information from "Windows".
7079f33d WindowsCE: Drop unused Platform/WindowsCE-MSVC module
05373f7e WindowsCE: Refactor setting of "WINCE"
1acde6b0 MSVC: Use STREQUAL to check for WindowsCE
This module was created to mirror Platform/Windows-MSVC.cmake, but this
is not necessary because nothing includes "Platform/<os>-<id>.cmake"
directly. The Platform/Windows-MSVC module is only a helper for the
Platform/Windows-MSVC-<lang> modules.
Move it to the Platform/Windows module since it is independent of the
compiler used. While at it, remove redundant "WIN32" setting from
Platform/Windows-MSVC since Plaform/Windows already sets its.
Allow the combination
-DCMAKE_OSX_DEPLOYMENT_TARGET="10.8" -DCMAKE_OSX_SYSROOT="/"
to work. Treat the "/" sysroot as targeting the current OS X version.
Commit v3.0.0-rc1~111^2 (QNX: Introduce QCC compiler id for that
QNX platform compiler., 2014-01-20) split handling of the QNX QCC
compiler into a separate compiler-id. That refactoring results in
the QCC compiler not using the CMake-compiler-id "GNU", which means
that the __compiler_gnu macro is no longer executed for it.
Add Compiler/QCC*.cmake modules to define and call the __compiler_qcc
macro and teach it to call __compiler_gnu internally. Remove the
corresponding pieces from the Platform/QNX*.cmake modules.
It is also necessary to change the language conditional to dereference
the lang macro parameter, which is another bug introduced by the
same commit. The extra -lang-c++ flag is only necessary when the CXX
compiler is specified as 'qcc' instead of 'QCC' in the toolchain file,
which is why this bug was not noticed before. The flag is also necessary
in that case when linking in order to find the appropriate standard
libraries. The flag was not previously added when linking executables,
so linking failed even with CMake 2.8.12 with the lower-case compiler-id.
Co-Author: Brad King <brad.king@kitware.com>
On WinCE we must link both shared libraries and executables with the
/subsystem:windowsce flag. Teach Platform/Windows-MSVC to pass it
to the linker in both cases.
Suggested-by: Gunnar Roth <gunnar.roth@gmx.de>
Call the generator "Visual Studio 14" without any year because this
version of VS does not provide a year in the product name.
Copy cmGlobalVisualStudio12Generator to cmGlobalVisualStudio14Generator
and update version numbers accordingly. Add the VS14 enumeration value.
Teach the platform module Windows-MSVC to set MSVC14 and document the
variable. Teach module InstallRequiredSystemLibraries to look for the VS
14 runtime libraries.
Teach tests CheckCompilerRelatedVariables, VSExternalInclude, and
RunCMake.GeneratorToolset to treat VS 14 as they do VS 10, 11, and 12.
Co-Author: Pawel Stopinski <diokhan@go2.pl>
Create a Platform/Android module that includes Platform/Linux since
Android is based on Linux. Provide only the minimal settings needed to
get builds with Android NDK toolchains to work.
Disable use of RPATH since the Android loader ignores it and we cannot
predict the install destination anyway.
Android supports soname but shared library names must end in ".so" and
we cannot represent the versioned names with associated symlinks on all
host operating systems anyway. However, we do want the SONAME of
library files to be set so that linking to them by path to the library
file produces NEEDED entries with the soname and not the path. Add a
new CMAKE_PLATFORM_NO_VERSIONED_SONAME setting to tell the
cmTarget::GetLibraryNames method that not to use the VERSION or
SOVERSION target properties in the soname.
Add to the Platform/Windows-GNU module list of VS registry entries those
for VS 2013. Also add the name "vcvars64.bat" used by VS 10 and above
for 64-bit tools.
Just like -I flag has its -isystem counterpart which marks an include
directory as a system directory and prevents unwanted warnings, on Apple
systems there is -iframework -- a system directory replacement for -F.
Use this flag to implement include_directories(SYSTEM) for frameworks.
For example if one installs Xcode 4.6 on OS X 10.9, it doesn't contain
a 10.9 SDK, so fallback to the next newest version which, in this case,
happens to be a 10.8 SDK.
This fixes bug #14572.
Initialize variables CMAKE_OSX_SYSROOT, CMAKE_OSX_DEPLOYMENT_TARGET, and
CMAKE_OSX_ARCHITECTURES prior to enabling any languages. This will
allow compiler identification to consider these values.
Extend CMAKE_PLATFORM_IMPLICIT_LINK_DIRECTORIES with these paths. We
already have the equivalents under /usr. Systems that have these
directories have their dynamic loaders configured already. Do not allow
them to appear in the RPATH explicitly.
f21ac16e Replace MATCHES test on numbers with EQUAL test
7eacbaed Replace MATCHES ".+" tests with NOT STREQUAL ""
3a71d34c Use CMAKE_SYSTEM_NAME instead of CMAKE_SYSTEM where sufficient
b0b4b460 Remove .* expressions from beginning and end of MATCHES regexs
5bd48ac5 Replace string(REGEX REPLACE) with string(REPLACE) where possible
2622bc3f Clean up usage of if(... MATCHES regex) followed string(REGEX REPLACE regex)
Since commit v2.6.0~388 (Added build rule variables
CMAKE_<LANG>_ARCHIVE_..., 2008-01-29) we use separate "ar cr ..." and
"ar r ..." steps to incrementally add a large list of object files to an
archive. Since the "r" command replaces existing objects of the same
name in an archive, if multiple objects have the same file name and
appear in separate append steps then one overwrites the other. Instead,
use "ar cq ..." and "ar q ..." to always append to the archive.
We already remove the archive before creating it so this will not cause
objects to be appended to existing archives on incremental rebuilds.
* Remove Watcom linker caseexact options already defined in system
definition.
* Use win_dll system for SHARED_LIBRARY and SHARED_MODULE.
* Use explicit target definition -bt=.. option for proper initialization
of compiler Windows environment (predefined macros)
* Reorganize compiler options to global options and configuration
specific options
* Use option to optimize out stack checking code for release version
Drop the CMAKE_NO_QUOTED_OBJECTS internal variable from the Makefile
generators. The underlying problem is with the Watcom linker, not with
WMake. The Watcom linker wants object files to be single-quoted. Add
<LINK-RULE>_USE_WATCOM_QUOTE platform information variables to tell the
generators to use Watcom-style single quotes for object files on link
lines.
On Windows, Watcom uses the GetCommandLine API to get the original
command-line string and do custom parsing that expects single quotes.
On POSIX systems, Watcom approximates the original command line by
joining all argv[] entries separated by a single space. Therefore we
need to double-quote the single-quoted arguments so that the shell does
not consume them and they are available for the parser to see.
64c2342a Watcom: Enable 'WMake Makefiles' generator on Linux
5d9aa66c Watcom: Introduce OpenWatcom compiler id and fix compiler version
9292d3b8 Watcom: Detect compiler target architecture and platform
fbc883c9 Watcom: Add one blank line to Makefile for better readability
Distinguish "Open Watcom" from old "Watcom" by introducing a new
"OpenWatcom" compiler id. The __WATCOMC__ format is "VVRP" for Watcom
and "VVRP + 1100" for Open Watcom.
Work around the command-line-length limit by using an @linklibs.rsp
response file to pass the flags for link libraries. This allows
very long lists of libraries to be used in addition to the existing
support for passing object files via response file.
Suggested-by: Peter Keuschnigg <peter.keuschnigg@pmu.ac.at>
Create each DLL import library by passing "option implib=..." to the
linker for its SHARED library. This works even when there are no
symbols to be exported. Leave the option out for MODULE libraries
because we do not need an import library for them. For executables,
retain the separate invocation of wlib because we want an import
library only when the ENABLE_EXPORTS property is set, and in that
case the project should provide symbols.
Suggested-by: J Decker <d3ck0r@gmail.com>
Since commit v2.8.12~437^2~2 (VS: Separate compiler and linker PDB files
2013-04-05) we no longer set /Fd with the PDB_NAME or PDB_OUTPUT_DIRECTORY
properties. Those properties now exclusively handle linker PDB files.
Since STATIC libraries do not link their compiler PDB file becomes more
important. Add new target properties "COMPILE_PDB_NAME[_<CONFIG>]" and
"COMPILE_PDB_OUTPUT_DIRECTORY[_<CONFIG>]" to specify the compiler PDB
file location and pass the value to the MSVC /Fd option.
Create platform information modules Platform/Darwin-Intel-(C|CXX).cmake
and helper module Platform/Darwin-Intel.cmake. Teach existing module
Platform/Darwin-Intel-Fortran.cmake to use the helper too. Move
information from Platform/Darwin-icc.cmake into these files and drop
information already in Platform/Darwin.cmake to avoid duplication.
Introduce policy CMP0047 to control resetting the id for
compatibility.
De-duplicate content in the QNX platform file by including the GNU
one. QNX is a form of GNU platform.
Do not clear CMAKE_SHARED_LIBRARY_${lang}_FLAGS variables. They
are populated again later by the Compiler/GNU.cmake file anyway.
Modify the CMAKE_CXX_COMPILE_OBJECT variable only when the QCC
compiler id is in use, and the language is CXX. Use the QNX
recommended flag for QCC instead of the gcc compatible -x flag.
Populate new module files to handle system includes and depfiles
when using the QCC compiler.
Remove code which unsets the system include and depfiles related
variables. When a GNU driver is used instead of the QCC one, the
appropriate flags will be used. These variables were previously
cleared for lowest-common-denominator compatibility with both
drivers.
This variable can be useful in cross-compiling contexts where the
sysroot is read-only or where the sysroot should otherwise remain
pristine.
If the new CMAKE_STAGING_PREFIX variable is set, it is used instead
of CMAKE_INSTALL_PREFIX when generating the installation rules in
cmake_install.cmake.
This way, the CMAKE_INSTALL_PREFIX variable
always refers to the installation prefix on the target device, regardless
of whether host==target.
If any -rpath paths passed to the linker contain the CMAKE_STAGING_PREFIX,
the matching path fragments are replaced with the CMAKE_INSTALL_PREFIX.
Matching paths in the -rpath-link are not transformed.
The cross-prefix usr-move workaround is assumed not to require extension
regarding CMAKE_STAGING_PREFIX. The staging area is a single prefix, so
there is no scope for cross-prefix symlinks. The CMAKE_INSTALL_PREFIX
is still used to determine the workaround path, and that variable
remains the relevant one even if CMAKE_STAGING_PREFIX is used. If the
generated export files are deployed to the target, the workaround
will still be in place, and still be employed if required.
For clang, this allows passing -target <triple> to the compiler, and
for qcc, -V<arch> using toolchain files containing something like
set(triple arm-linux-gnueabihf)
set(CMAKE_C_COMPILER "/usr/bin/clang")
set(CMAKE_C_COMPILER_TARGET ${triple})
set(CMAKE_CXX_COMPILER "/usr/bin/clang++")
set(CMAKE_CXX_COMPILER_TARGET ${triple})
or
set(arch gcc_ntoarmv7le)
set(CMAKE_C_COMPILER /opt/qnx650/host/linux/x86/usr/bin/qcc)
set(CMAKE_C_COMPILER_TARGET ${arch})
set(CMAKE_CXX_COMPILER /opt/qnx650/host/linux/x86/usr/bin/QCC)
set(CMAKE_CXX_COMPILER_TARGET ${arch})
Both clang and qcc are inherently cross compiler( driver)s.
When cross-compiling with clang, use the CMAKE_${lang}_COMPILER_TARGET
as the _CMAKE_TOOLCHAIN_PREFIX to find the appropriate binutils.
When cross-compiling with QNX qcc, use the CMAKE_${lang}_COMPILER_TARGET
to set the appropriate _CMAKE_TOOLCHAIN_PREFIX.
In certain scenarios, it is preferable to keep a 'dirty' install prefix
than to clear it, and to expect that content will not be found there.
Add a CMAKE_FIND_NO_INSTALL_PREFIX variable that can be set to disable
searching the install prefix.
Drop all behavior activated by setting CMAKE_BACKWARDS_COMPATIBILITY to
a value lower than 2.4, and generate an error when projects or the user
attempt to do so. In the error suggest using a CMake 2.8.x release.
Teach cmake_minimum_required to warn about projects that do not require
at least CMake 2.4. They are not supported by CMake >= 3.0.
Replace the documentation of CMAKE_BACKWARDS_COMPATIBILITY with a
reference to policy CMP0001.
In generators such as Ninja that can run multiple "cl" processes that
refer to the same compiler .pdb file (/Fd) at the same time, MSVC from
Visual Studio 2013 complains:
fatal error C1041: cannot open program database '.../vc120.pdb';
if multiple CL.EXE write to the same .PDB file, please use /FS
According to "cl /?":
/FS force to use MSPDBSRV.EXE
Add the flag to compilation lines for this compiler version just after the
/Fd option.
Teach CMake(C|CXX|Fortran)CompilerId* to report the MSVC version
simulated by the Intel compiler, if any. Refactor the Windows-Intel
platform information helper module to load Windows-MSVC instead of
duplicating the information. Teach Windows-MSVC to understand when
it is loaded as the simulated Fortran compiler (its preprocessor is
simulated).
Compilers for languages other than C and C++ on OS X may not understand
the -F framework search flag. Create a new platform information
variable CMAKE_<LANG>_FRAMEWORK_SEARCH_FLAG to hold the flag, and set it
for C and CXX lanugages in the Platform/Darwin module.
Reported-by: Vittorio Giovara <vittorio.giovara@gmail.com>
54ef2be Haiku: Include files cleanup in cmCTest
38d5555 Haiku: Remove outdated preprocessor checks
1dc61f8 Haiku: Remove use of B_COMMON_DIRECTORY
7ebc1cb Haiku: Several fixes to platform module
1763c31 Set policy CMP0025 to NEW while building CMake itself
aa53ee5 Add policy CMP0025 for Apple Clang compiler id compatibility
ab65862 Clang: Add separate "AppleClang" compiler id
* Do not define BEOS anymore (this includes workarounds which we don't
need most of the time in Haiku, so we prefer opt-in IF(HAIKU) in the
cmake files instead).
* On the other hand, do define UNIX (we are trying to be compliant) and
HAIKU (there is still a number of things we don't do like the
average UNIX clone)
* Do not use UnixPaths, as our filesystem hierarchy isn't anything like
what it expects.
* Do not use -nostart, which the compiler doesn't know about anymore.
This used to be an Haiku extension to gcc, and is equivalent to
-shared which is the default gcc option.
* While "dl" functions are provided in libroot, this is always
implicitly linked so there is no need to tell cmake about it.
* Forcing position-independent code is not needed, so remove it.
* On the other hand, include appropriate linker options for executables
and shared libraries.
* Support for the two available compilers in Haiku (gcc2 and gcc4) and
pick the right headers and libraries according to the currently
selected one.
* With the adoption of the package manager, the directory layout was
changed. Tell cmake where to look for header files and libraries.
* As we don't define BEOS anymore, enable the workaround we still need
for HAIKU as well. This is the lack of a libm (it is part of the
implicitly linked in libroot)
Applied-by: Rolf Eike Beer <eike@sf-mail.de>
Apple distributes their own Clang build with their own version numbers
that differ from upstream Clang. Use the __apple_build_version__ symbol
to identify the Apple Clang compiler and report the Apple Build Version
as the fourth version component in CMAKE_<LANG>_COMPILER_VERSION. Add
Compiler/AppleClang-<lang> and Platform/Darwin-AppleClang-<lang> modules
that simply include the upstream equivalents.
Fix comparisons of CMAKE_<LANG>_COMPILER_ID to Clang in CMake's own
source and tests to account for AppleClang.
Teach the compiler identification preprocessor tests to report when
Clang simulates MSVC, and what version. If not MSVC, assume GNU.
Teach compiler information modules Clang-(C|CXX) to recognize when Clang
simulates MSVC and skip loading the GNU information.
Teach the Windows-MSVC platform information to recognize when it is
loaded as the simulated compiler and use that version information
instead of the real compiler's (different) version scheme.
Add platform modules Windows-Clang-(C|CXX) and support module
Windows-Clang to load either Windows-MSVC or Windows-GNU and wrap
the corresponding information macros.
In Modules/Platform/Darwin.cmake set CMAKE_SYSTEM_FRAMEWORK_PATH to
include framework directories from inside the system SDK corresponding
to CMAKE_OSX_SYSROOT.
Suggested-by: Sean McBride <sean@rogue-research.com>
In commit bd827f98 (Use COFF file header header for architecture
detection, 2013-08-05) the MSVC_<lang>_ARCHITECTURE_ID value computed by
CMakeDetermineCompilerId.cmake changed for WinCE architectures to be the
exact architecture read from the PE header. Fix platform preprocessor
definitions in Modules/Platform/Windows-MSVC.cmake to correspond to the
architecture family (ARM or SHx) instead of the specific architecture.
In commit 8fcf0ab0 (Add support for new Windows CE compiler, 2013-08-04)
we made corelibc conditional on the MSVC version, but the version value
was incorrect. Update it to use corelibc for VS 2008 and below.
In commit fb9f73de (MSVC: Invoke 'link' directly for executables,
2013-04-08) we forgot to remove the /link option handling added by
commit e31df039 (Ninja: move <OBJECTS> in front of the first linker
option, 2012-09-27) to the Platform/Windows-MSVC module. Drop it now.
Since commit 95f78e08 (OS X: Search for SDK based on deployment target,
2013-08-02) we select the default OS X SDK path to match the deployment
target. Fix this behavior in the case that the matching SDK does not
exist and fall back to the SDK for the current host OS X version.
Teach modules CMakeDetermineCompiler and CMakeUnixFindMake to ask Xcode
where to find the compiler or make tools, using 'xcrun --find', if none
is found in the PATH. Teach module Platform/Darwin to add the path to
the SDK to CMAKE_SYSTEM_PREFIX_PATH so that find_* command look there.
Also add the SDK /usr/include directory to the implicit include list in
CMAKE_${lang}_IMPLICIT_INCLUDE_DIRECTORIES to suppress explicit -I
options for it.
When available, use CMAKE_OSX_DEPLOYMENT_TARGET instead of the host OS X
version to select the default SDK. This makes sense because one should
use the SDK matching the deployment target.
Suggested-by: John Ralls <jralls@ceridwen.us>
The linker flags for setting the compatibility and current versions of
libraries on Darwin are set for the supported Fortran compilers.
Set CMAKE_Fortran_CREATE_SHARED_LIBRARY for the NAG Fortran compiler to
have no space after <SONAME_FLAG> so the NAG compiler can parse the
argument correctly.
Copy cmGlobalVisualStudio11Generator to cmGlobalVisualStudio12Generator
and update version numbers accordingly. Add the VS12 enumeration value.
Add module CMakeVS12FindMake to find MSBuild. Look for MSBuild in its
now-dedicated Windows Registry entry. Teach the platform module
Windows-MSVC to set MSVC12 and document the variable. Teach module
InstallRequiredSystemLibraries to look for the VS 12 runtime libraries.
Teach tests CheckCompilerRelatedVariables, Preprocess, VSExternalInclude,
and RunCMake.GeneratorToolset to treat VS 12 as they do VS 10 and 11.
Inspired-by: Minmin Gong <minmin.gong@gmail.com>
Leave other flags directly in the Makefile command lines and outside
any special inline response file syntax. Otherwise Borland does
not support flags with quotes in response files.
For clang, this allows passing -target <triple> to the compiler, and
for qcc, -V<arch> using toolchain files containing something like
set(triple arm-linux-gnueabihf)
set(CMAKE_C_COMPILER "/usr/bin/clang")
set(CMAKE_C_COMPILER_TARGET ${triple})
set(CMAKE_CXX_COMPILER "/usr/bin/clang++")
set(CMAKE_CXX_COMPILER_TARGET ${triple})
or
set(arch gcc_ntoarmv7le)
set(CMAKE_C_COMPILER /opt/qnx650/host/linux/x86/usr/bin/qcc)
set(CMAKE_C_COMPILER_TARGET ${arch})
set(CMAKE_CXX_COMPILER /opt/qnx650/host/linux/x86/usr/bin/QCC)
set(CMAKE_CXX_COMPILER_TARGET ${arch})
Both clang and qcc are inherently cross compiler( driver)s.
dc1d025 OS X: Add test for rpaths on Mac.
8576b3f OS X: Add support for @rpath in export files.
00d71bd Xcode: Add rpath support in Xcode generator.
94e7fef OS X: Add RPATH support for Mac.
RPATH support is activated on targets that have the MACOSX_RPATH
property turned on.
For install time, it is also useful to set INSTALL_RPATH to help
find dependent libraries with an @rpath in their install name.
Also adding detection of rpath conflicts when using frameworks.
Initialize the CMAKE_CONFIGURATION_TYPES cache entry early during
EnableLanguage like the Xcode generator does. Avoid depending on
the MSVC compiler information module to do it. Otherwise code like
project(MyProj NONE)
sets CMAKE_CONFIGURATION_TYPES late (in GenerateConfigurations), and
to only "Debug" and "Release" instead of the standard set of 4.
Reported-by: Paul Smith <paul@mad-scientist.net>
Commit dac78148 (...makes the mingw cross compiler work out of the
box..., 2007-08-02) added to CMAKE_SYSTEM_PROGRAM_PATH and
CMAKE_SYSTEM_LIBRARY_PATH paths like "/bin" and "/lib" with no Windows
drive letter so that cross-compiling to Windows from Linux would search
these paths under CMAKE_FIND_ROOT_PATH. Later commit 2a782880 (...use
CMAKE_SYSTEM_PREFIX_PATH when possible, 2008-01-16) generalized this
approach by instead adding "/" to CMAKE_SYSTEM_PREFIX_PATH.
Both commits assumed that the paths would never match anything on
Windows hosts without a drive letter. However, Windows evaluates these
paths relative to the current working drive letter so find_* commands
may report paths like "/lib/..." when paths like "c:/lib/..." exist on
what happens to be current drive. Such drive-less paths are not
reliable when the working drive changes, so we should not use them.
Fix WindowsPaths.cmake to add '/' to CMAKE_SYSTEM_PREFIX_PATH only when
cross-compiling to Windows from a non-Windows host. This will avoid
searching and finding local paths without a drive letter on Windows.
Update the CMAKE_<LANG>_LINK_EXECUTABLE rule variable to invoke the
linker directly instead of through the compiler. We already do this
for DLL linking with CMAKE_<LANG>_CREATE_SHARED_LIBRARY.
This also works around a VS 6 cl bug. While invoking the link tool
internally it fails to correctly quote flags like /pdb:... with spaces
in the value.
The MS tools create two types of PDB files as explained here:
http://msdn.microsoft.com/en-us/library/yd4f8bd1%28v=vs.71%29.aspxhttp://msdn.microsoft.com/en-us/library/yd4f8bd1%28v=vs.80%29.aspxhttp://msdn.microsoft.com/en-us/library/yd4f8bd1%28v=vs.90%29.aspxhttp://msdn.microsoft.com/en-us/library/yd4f8bd1%28v=vs.100%29.aspx
One is created by the compiler (/Fd) and the other by the linker (/pdb).
The two options should not specify the same file. Split them up.
In the VS IDE generators, simply drop ProgramDataBaseFileName to
take the VS default "/Fd$(IntDir)vc$(PlatformToolsetVersion).pdb".
In the Makefile generators, set "/Fd" on the compile line to be
the directory containing object files (with a trailing slash the
compiler will add the "vc$(PlatformToolsetVersion).pdb" filename
automatically). Drop the /Fd option from the exe link command
line and add "/pdb" instead (already done for dll linking).
Update these rules for both MSVC and Intel tools.
Drop support for PDB_OUTPUT_DIRECTORY and PDB_NAME in STATIC
libraries because the generated .pdb files are only from /Fd
and not real linker-generated .pdb files. Update documentation to
clarify that the PDB_* properties are only for linker .pdb files.
This regresses the PDBDirectoryAndName test for STATIC libraries.
Since it is not clear at this time what should be done for STATIC
library .pdb files, comment out the relevant portion of the test
and leave a TODO comment.
The flag was added incorrectly by commit 9c3a6eb4 (Need -brtl when creating
shared libraries, 2003-05-16). According to "man ld" the -G option implies
"-brtl -bnortllib ...", -brtl implies "-brtllib", and -brtllib should only be
used for executables, not shared libraries. Therefore it is incorrect and
unnecessary to specify -brtl explicitly after -G.
Reported-by: Kevin Burge <kcburge@gmail.com>
The GNU compiler front-ends on AIX invoke the linker with flags of the
form "-L/path/to/gnu/runtime/lib" to tell ld where to find the language
runtime libraries. They depend on the default libpath behavior
documented in "man ld" to add the -L paths also to the runtime libpath
so the dynamic loader can find the language runtime libraries. This
differs from platforms whose linkers have distinct -rpath flags that
non-system compilers can use to tell the dynamic loader where to find
their language runtime libraries.
Since commit 96fd5909 (Implement linking with paths to library files,
2008-01-22) CMake always passes "-Wl,-blibpath:" followed by any
project-defined RPATH plus "/usr/lib:/lib" in order to explicitly set
the runtime libpath and avoid getting all the project -L paths in the
runtime libpath. The explicit libpath prevents the GNU compiler runtime
library -L paths from being placed in the libpath and then the dynamic
loader fails to find the language runtime libraries.
CMake already detects the implicit link directories for each language
since commit 07ea19ad (Implicit link info for C, CXX, and Fortran,
2009-07-23). Add the implicit link directories to the explicit runtime
libpath for GNU compilers on AIX to fix this use case.
Since commit c70beb4b (change the default borland stack size, 2003-05-05),
commit 1b572eb9 (remove -H flags, 2003-05-08), and commit 2d411398 (Stack size
in generated programs should be 10 meg, 2003-06-12) CMake adds link flags to
select a 10MB stack. At the time this was for consistency with our behavior on
MS, but that was recently removed by commit 51af1da3 (Remove "/STACK:10000000"
from default linker flags, 2012-11-23).
Change our Embarcadero link flags to select the default stack and heap settings
according to the compiler documentation. This is more reliable than leaving
the flags out completely as it has been reported that the linker does not
always use its documented defaults.
Suggested-by: Mathäus Mendel <contato@mathausmendel.com>
Brad King
Zack Galbreath
Todd Gamblin
Gunnar Roth
Gregor Jasny
Robert Maynard
Stephen Kelly
Fraser Hutchison
Tim Gallagher
J Decker
Ben Boeckel
Gilles Khouzam
Paul Annetts
Nils Gladitz
Jeremy Huddleston
Rolf Eike Beer
Mikołaj Siedlarek
Clinton Stimpson
Peter Kümmel
Jiri Malak
Adrien Destugues
Alex Neundorf
Flynn Marquardt
Patrick Gansterer
Graham Markall
Andreas Mohr