This fixes a bug where 64 bit builds with /bigobj incorrectly determined
that the object files were not 64 bit. This manifested itself with
printf type functions showing up as undefined because the leading
underscore was being removed and should not be removed.
If a custom command has a SYMBOLIC output (that is never actually
created) then do not mark the custom command build statement as
'restat'. Otherwise other custom commands that depend on the symbolic
output may not always re-run because after running the first custom
command Ninja 'restat' will detect that the output timestamp did not
change and skip its dependents.
This was observed with the ExternalProject BUILD_ALWAYS option where
Ninja would not re-run the 'install' step each time 'build' re-runs.
Move generation of 'restat = 1' from the CUSTOM_COMMAND rule to every
build statement using it. This will allow future selection of this
option on a per-custom-command basis.
Our check of CMAKE_PLATFORM_NO_VERSIONED_SONAME, originally added by
commit v3.1.0-rc1~416^2 (Add basic Android platform module, 2014-06-06),
was dropped accidentally by commit v3.4.0-rc1~250^2~21
(cmGeneratorTarget: Move GetLibraryNames from cmTarget, 2015-08-04).
Restore the check in the new location of the GetLibraryNames method.
Our check of CMAKE_PLATFORM_NO_VERSIONED_SONAME, originally added by
commit v3.1.0-rc1~416^2 (Add basic Android platform module, 2014-06-06),
was dropped accidentally by commit v3.4.0-rc1~250^2~21
(cmGeneratorTarget: Move GetLibraryNames from cmTarget, 2015-08-04).
Restore the check in the new location of the GetLibraryNames method.
MS tools have a limit on the number of symbols that can be listed
in a `.def` file. If multiple `.obj` files provide a symbol then
avoid listing it more than once in the generated `.def` file to
avoid counting toward the limit.
Refactoring in commit v3.4.0-rc1~74^2~1 (MSVC: Rewrite manifest file
handling with Makefile and Ninja, 2015-09-15) broke handling of this
option. Fix it and add a test case.
The -T parameter to CMake may now be specified through cmake-gui via a
new text field in the first-time configure wizard (below the generator
chooser).
The generator factories specify whether or not they support toolsets.
This information is propagated to the Qt code and used to determine if
the selected generator should also display the optional Toolset widgets.
4bca9401 Improve appearance of CMake .dmg package on OS X
c4b9ee18 CPack/DragNDrop: Update documentation to include new variables
167a4655 CPack/DragNDrop: Optionally run an AppleScript when making a package
9c1dfbfd CPack/DragNDrop: Place the background image file in a hidden folder
47302038 CPack/DragNDrop: Use source file extension for background image
While the DragNDropGenerator supports custom DS_Store and backgrounds,
it is still very hard to automatically setup nice looking packages. The
primary issue is that the DS_Store embeds the name of the volume in the
path to backgrounds, which means that if a package embeds the version in
its volume name a new DS_Store must generated for each release.
Instead one now can use applescript to setup the DS_Store.
This change also ensures that temporary RW image has enough space for
these changes, creating 1 MB dummy padding file, that is later removed
from the image.
Co-Author: Adam Strzelecki <adam.strzelecki@java.pl>
By using a hidden folder we avoid the need to mark the file as hidden
from finder, and it makes it easier for future work to refer to the
background image file.
Instead of blindly copying the `CPACK_DMG_BACKGROUND_IMAGE` file to
`background.png`, we instead use the same file extension as the source
image. This is needed for proper support of multi resolution `tif`
backgrounds.
The top-level WiX feature implicitly created by the WIX generator
represents the package as a whole.
As such it does not make sense to allow installer users to deselect
it from the installation.
Suggested-by: Mark Stijnman
The moved-from location checks for the existence of whether certain
generators are needed for any target in a loop, rather than whether
the current target has an install rule.
This was introduced in commit v3.4.0-rc1~275^2~3 (cmInstallCommand: Move
the SetHaveInstallRule invocation., 2015-07-28). Move the
SetHaveInstallRule call to a more-obvious place where the
cmInstallTargetGenerator is constructed.
Commit c389f8bb (cmLocalGenerator: Port Find method away from
GetGeneratorTarget, 2015-10-25) ported the implementation of
FindGeneratorTargetToUse away from the FindTargetToUse method,
but neglected to handle alias targets.
The latter method has a parameter to determine whether to
include alias targets in the search, but as that is only
needed at configure time, this generate-time equivalent does
not need the condition.
Multiple languages for SLAs and the SLA UI can be added via the CPack
variables CPACK_DMG_SLA_DIR and CPACK_DMG_SLA_LANGUAGES. For each
language defined in the languages variable, CPack will search for
<language>.menu.txt and <language>.license.txt in CPACK_DMG_SLA_DIR.
If the sla directory variable is not defined, the old behaviour using
CPACK_RESOURCE_FILE_LICENSE is retained.
Teach the lexer to extract the #line directive prefix and line number as
a new token type. Teach the parser to recognize this token followed by
a string as the file name (plus possibly other content). Report the
named file as included by the source file.
Changes in commit v3.4.0-rc1~124^2~1 (cmFindProgramCommand: Re-implement
search using more flexible approach, 2015-09-01) did not preserve the
behavior of looking for the given name with no search path at all.
Fix this and add a test case covering finding an absolute path with
no search directories.
In commit v3.2.0-rc1~480^2 (QtAutogen: Regenerate qrc files if their
input changes, 2014-09-17) we added use of the rcc `--list` option.
Prior to Qt 5.2 this option was called just `-list`. Run `rcc --help`
to check for support for `--list` before using it and otherwise fall
back to the `-list` option for compatibility with older versions.
79c3a2a8 cmGlobalGenerator: Remove map from cmTarget to cmGeneratorTarget
c389f8bb cmLocalGenerator: Port Find method away from GetGeneratorTarget
02533038 VS6: Port to FindGeneratorTarget
b6278e9f cmake: Port find_package mode away from GetGeneratorTarget
7a6caae1 cmMakefile: Add imported target accessor
0fb187cc CMP0026: Port away from GetGeneratorTarget
8caf1f36 cmGlobalGenerator: Add FindGeneratorTarget API
278ba2db cmGeneratorTarget: Add API for globally visible IMPORTED
79c11d23 Xcode: Port away from GetGeneratorTarget
9b244cc0 cmLocalGenerator: Store imported targets in a separate container.
def6da61 cmLocalGenerator: Port FindGeneratorTarget away from GetGeneratorTarget
a67231ac cmTarget: Implement ALIAS in terms of name mapping
d566f39a cmGlobalGenerator: Remove unneeded GetGeneratorTarget
0c97d32f cmGlobalGenerator: Remove direct storage of targets
383bfd95 cmTargetCollectLinkLanguages: Remove cmMakefile dependency
7f6bedda cmGeneratorTarget: Port cmOptionalLinkImplementation
...
b272a656 cmSystemTools: Preemptively adapt to future libarchive 4.0 changes
87f1f363 cmArchiveWrite: Preemptively adapt to future libarchive 4.0 changes
45cd9e63 Update libarchive configuration within CMake
c09acf4f libarchive: Update README-CMake.txt for new snapshot
2f940f89 libarchive: Drop use of pthread.h for CMake build
1e473817 libarchive: Do not use pthread.h API without header
43d577dc libarchive: Test for Clang builtin before using it
85e0bb84 libarchive: Avoid using 'uint8_t' as bitfield type
c70491d6 libarchive: Avoid using name 'hz'
1bbba477 libarchive: Drop outdated CMake portability snprintf
64bdf0b7 libarchive: Avoid non-portable u_int8_t
8f837fc9 libarchive: Use CommonCrypto APIs on OS X only when available
61a0251e libarchive: Define O_CLOEXEC when missing
832fe4b1 libarchive: Fix VS 7.1 Debug build
0b82f51a libarchive: Guard bcyrpt.h with HAVE_BCRYPT_H
5333c04c libarchive: Drop CMake-specific Borland compiler workaround
...
Ensure that cmStandardIncludes.h is included before any platform header
in cmGeneratorExpressionEvaluator.h. That file needs to change as
a result of removal of the cmMakefile.h header from
cmGeneratorExpressionNode.h, affecting the compilation of
cmGeneratorExpressionNode.cxx.
On AIX we need to include our own headers first to get large file
support macros defined consistently within system headers. The old
order in this header worked only because it was always included after
other headers.
This reverts commit 9a271e1323. The
`-list` option is not documented and may be removed in future Qt
versions. Fixing this correctly will require detecting the availability
of `--list` or `-list` based on the `rcc` version found. For now we
choose to support the documented option that will be supported in future
Qt versions.
This reverts commit 9a271e1323. The
`-list` option is not documented and may be removed in future Qt
versions. Fixing this correctly will require detecting the availability
of `--list` or `-list` based on the `rcc` version found. For now we
choose to support the documented option that will be supported in future
Qt versions.
6cac952b VS: Port interface to cmGeneratorTarget
97b37688 VS: Port WriteUtilityDepends to cmGeneratorTarget
600af01d VS: Port utility depends to cmGeneratorTarget
330bfa83 VS: Port target depends to cmGeneratorTarget
b13e26e2 VS: Port ProjectDepends to cmGeneratorTarget.
8ac8739b VS: Port TargetIsFortranOnly to cmGeneratorTarget
84fb579f VS: Port WriteProject to cmGeneratorTarget
1eff421a VS: Port loop to cmGeneratorTarget
94fd5a5a VS: Port ImplibDir to cmGeneratorTarget
ce9e9a92 VS: Port LinkClosure to cmGeneratorTarget
26e23e84 VS: Port ComputeLongestObjectDirectory to cmGeneratorTarget
01c26986 VS7: Port to cmGeneratorTarget
459c8910 VS10: Port to cmGeneratorTarget.
7f8bb857 VS6: Port to cmGeneratorTarget.
a0ebd69b Graphviz: Port to cmGeneratorTarget.
bcee21ce C::B: Port API to cmGeneratorTarget.
...
Changes in commit v3.4.0-rc1~79^2~1 (CPackDeb: use of libarchive and
removal of fakeroot, 2015-09-11) accidentally set the wrong compression
scheme for the `control.tar.gz` file. Set it explicitly to GZip.
Refactoring in commit v3.4.0-rc1~390^2~1 (cmCTestMultiProcessHandler:
Refactor RUN_SERIAL implementation, 2015-06-01) forgot to update a code
path for cleaning up after a failed RUN_SERIAL test. This causes an
infinite loop after a RUN_SERIAL test fails. Fix it and add a test.
c099e00f Access policy status from cmGeneratorTarget at generate time.
d74bca5a cmGeneratorTarget: Copy the policy map from the cmTarget.
c6e86955 cmTarget: Remove unused NameResolvesToFramework.
18046bd5 cmCommonTargetGenerator: Use NameResolvesToFramework without cmTarget.
91411641 Move ComputeLinkType out of cmTarget.
6d94078e cmGeneratorTarget: Move IsDLLPlatform from cmTarget.
3ebc6285 cmGeneratorTarget: Move HaveWellDefinedOutputFiles from cmTarget.
311018e5 cmGeneratorTarget: Move GetExportMacro from cmTarget.
215cd21a cmGeneratorTarget: Provide direct access to the backtrace.
1df8bd3a cmGlobalGenerator: Port IsRootOnlyTarget to cmGeneratorTarget.
83703bda cmGeneratorTarget: Copy IsExecutableWithExports from cmTarget.
c0969b10 cmMakeDepend: Inline into inheriting class.
6a1e7328 cmMakeDepend: Inline into only user.
00f50b00 cmMakeDepend: Inline into header.
3df749af Remove vestigial declarations.
3029c27e cmMakeDepend: Use public cmMakefile API.
a4bbdc5e cmLocalGenerator: Remove cmGeneratorTargetsType from setter API.
04b6bb16 cmLocalGenerator: Simplify semantic of adding generator targets.
400e3d19 cmLocalGenerator: Don't store imported generator targets
726e461b CMP0063: Split unit test by target type.
Commit v3.4.0-rc1~494^2~4 (cmMakefile: Add API for elseif to create
backtrace., 2015-05-29) removed the use of cmMakefileCall to push/pop
execution context in favor of a new way to create backtraces.
However, a call to cmMakefile::GetExecutionContext is still invoked to
issue a contextual CMP0054 warning through cmConditionEvaluator. As
the elseif is not part of the call stack, this resulted in trying to
access an empty vector.
Avoid the attempt at getting execution context when evaluating elseif by
constructing a context and backtrace on behalf of the cmConditionEvaluator
in all cases.
Set variables in the platform information modules to tell the Ninja
generator what deps type to use instead of hard-coding conditions in the
generator itself.
d8f8940b cmGeneratorTarget: Move IsCFBundleOnApple from cmTarget.
7550879f cmGeneratorTarget: Move IsXCTestOnApple from cmTarget.
88d10d55 cmGeneratorTarget: Copy IsAppBundleOnApple from cmTarget.
b5f5de70 cmGeneratorTarget: Copy IsFrameworkOnApple from cmTarget.
8e20ea6e cmGeneratorTarget: Move IsLinkable from cmTarget.
a527abf0 Xcode: Port internal API to cmGeneratorTarget.
eb3be7d6 cmGeneratorTarget: Move GetExportName from cmTarget.
d231c31b Export: Port internal API to cmGeneratorTarget.
e6661282 Export: Port internal utility to cmGeneratorTarget.
2b9cc1e2 Export: Port some API to cmGlobalGenerator.
97062ac2 cmInstallTargetGenerator: Port GetInstallFilename to cmGeneratorTarget.
6a72b3c8 Export: Port interface to cmGeneratorTarget.
1293c156 cmExportTryCompileFileGenerator: Port to cmGeneratorTarget.
381e7afd cmExportSet: Store a cmGeneratorTarget.
65911cae cmGlobalGenerator: Compute export() related classes early.
37ab74a6 cmLocalGenerator: Port PList handling to cmGeneratorTarget.
...
55474e61 cmState: Move GetTargetTypeName from cmTarget.
38df5c36 Remove now-obsolete casts.
4ee2b267 cmGeneratorTarget: Use enum for GetType.
eac15298 cmState: Move TargetType enum from cmTarget.
482b3811 cmTarget: Move link type enum out.
2ee1cb85 cmTarget: Move ImportInfoMap out of internal class.
a48bcabd cmTarget: Move backtrace member out of internal class.
6694d993 cmTarget: Remove unneeded constructors.
983c00f8 Generators: Use GetType from the cmGeneratorTarget.
7f5ec9f1 cmLocalGenerator: Port GetTargetDirectory to cmGeneratorTarget.
06f56d3b cmLocalUnixMakefileGenerator3: Port AppendCleanCommand to cmGeneratorTarget.
c8f8f165 cmLocalUnixMakefileGenerator3: Port another API to cmGeneratorTarget.
9f299a12 cmLocalUnixMakefileGenerator3: Port API to cmGenertorTarget.
Do not produce "{optgroup=GhsCommonOptions}" in the generated .gpj
files. The flag was added originally to match an old project file, but
it does not seem necessary and is not compatible with all GHS versions.
2293d43d cmLocalGenerator: Store cmGeneratorTargets.
488723f5 cmMakefile: Store container of cmExportBuildFileGenerators.
15834405 cmGeneratorExpression: Port interface to cmGeneratorTarget.
11165525 cmGeneratorExpression: Port to cmLocalGenerator.
1fdccff5 Genex: Port implementation detail to cmGeneratorTarget.
ce75c86e cmGeneratorTarget: Move GetSupportDirectory from cmTarget.
526cc7dc cmGeneratorTarget: Move HasImportLibrary from cmTarget.
8d2e3e53 cmGeneratorTarget: Move HasImplibGNUtoMS from cmTarget.
a143d4ac Sublime: Port some API to cmGeneratorTarget.
993aace7 cmGeneratorTarget: Port processILibs to cmGeneratorTarget.
43ade995 cmGeneratorTarget: Port getTypedProperty to cmGeneratorTarget.
5fd2f43f cmGeneratorTarget: Port handleSystemIncludesDep to cmGeneratorTarget.
f7acd742 cmGeneratorTarget: Port LinkImplClosure to cmGeneratorTarget.
763f7b19 cmCommonTargetGenerator: Port implementation detail to cmGeneratorTarget.
ceb35b63 cmLinkItem: Port to cmGeneratorTarget.
bf2d061a cmGeneratorTarget: Move FindTargetToLink from cmTarget.
61c02dec cmHeadToLinkInterfaceMap: Port to cmGeneratorTarget.
9ca4cae5 cmGeneratorTarget: Move GetUtilityItems from cmTarget.
d6b394ed cmComputeLinkDepends: Port result API to cmGeneratorTarget.
7c8236ef cmComputeLinkInformation: Port result API to cmGeneratorTarget.
...
Set a cmLocalGenerator on each instance at compute time. That will
soon be needed to access cmGeneratorTarget instances.
If a cmExportBuildFileGenerator is processed early during configure time as a
result of CMP0024 it must be removed from the list to process later at generate
time.
Add new API for the subdirs command to cmState.
This fixes a regression introduced in commit f716460e (cmMakefile: Move
invokation to initialize snapshot., 2015-10-06).
1c1c2a12 cmGeneratorTarget: Port ExpandLinkItems away from cmTarget.
c66084f5 cmGeneratorTarget: Port GetImportLinkInterface away from cmTarget.
83c29e39 cmGeneratorTarget: Port ComputeLinkImplementationLibraries away from cmTarget.
19882554 cmGeneratorTarget: Port handleSystemIncludesDep away from cmTarget.
c1f687b1 cmGeneratorTarget: Port GetLinkImplementationLibrariesInternal.
a6e1f05c cmGeneratorTarget: Port ComputeLinkInterface away from cmTarget.
654002fe cmGeneratorTarget: Port ComputeLinkInterfaceLibraries away from cmTarget.
922c8901 cmGeneratorTarget: Port GetLinkInterface away from cmTarget.
eaa5b9cb cmGeneratorTarget: Port cmTargetCollectLinkLanguages away from cmTarget.
f539da12 cmGeneratorTarget: Port GetLinkInterfaceLibraries away from cmTarget.
1c5d70f9 cmGeneratorTarget: Port processILibs away from cmTarget.
064c2488 cmComputeLinkDepends: Port some API to cmGeneratorTarget.
3e428fdc cmGeneratorTarget: Move IsImportedSharedLibWithoutSOName from cmTarget.
110fd2fb cmGeneratorTarget: Move GetOutputTargetType from cmTarget.
e7391699 cmGeneratorTarget: Move HasMacOSXRpathInstallNameDir from cmTarget.
c5718217 cmGeneratorTarget: Move HaveInstallTreeRPATH from cmTarget.
...
28749903 cmState: Internalize the initialization of a snapshot from its parent.
6c02f62f Remove now-unused directory setters.
360e4e1d Set the current dirs on the snapshot before creating the cmMakefile.
f716460e cmMakefile: Move invokation to initialize snapshot.
The cmMakefile should get a fully prepared snapshot and not clobber its
definitions. It should eventually be able to process list files from any
starting-point snapshot, though that is some refactoring away still.
616f0311 cmGlobalGenerator: Move path computation to Compute.
9eea0486 cmGlobalGenerator: Do more computation at compute time.
2eca0559 cmGlobalGenerator: De-virtualize Compute().
21f428f4 VisualStudio: Replace Compute override with AddExtraIDETargets override.
a9588e90 VisualStudio10: Initialize the LongestSource at generate time.
4407eee0 cmGlobalGenerator: Call AddExtraIDETargets as a hook of Compute().
a09c545d Xcode: Extract a AddExtraIDETargets method.
2402bb8c Help: Document Windows 10 Universal Applications in cmake-toolchains(7)
1be2f12c VS: Add support for Windows 10 Universal (Store) Applications
2798dbda VS: Refactor indentation of LinkLibraryDependencies
8c426183 MSVC: Add system libs for WindowsStore on VS 2015
d1b87d72 VS: Select Windows 10 Store SDK and toolset for VS 2015
Teach the VS 2015 generator to support WindowsStore 10.0 applications.
Add target properties to customize them:
* VS_WINDOWS_TARGET_PLATFORM_MIN_VERSION: Specifies the minimum version
of the OS that the project can target.
* VS_DESKTOP_EXTENSIONS_VERSION, VS_MOBILE_EXTENSIONS_VERSIONS,
VS_IOT_EXTENSIONS_VERSION: Add a reference to the version of the SDK
specified to the target allowing to target the extended functionality in
a universal project.
* VS_IOT_STARTUP_TASK: Specifies that the target should be
built as an IOT continuous background task.
3f077996 VS: Add support for selecting the Windows 10 SDK (#15670)
5dfc4c5f VS: Add hook to initialize Windows platform settings
61c472a2 cmSystemTools: Add VersionCompareGreater helper
Teach the VS 2015 generator to produce a WindowsTargetPlatformVersion
value. Use the CMAKE_SYSTEM_VERSION to specify the version and if not
set choose a default based on available SDKs. Activate this behavior
when targeting Windows 10.
Co-Author: Brad King <brad.king@kitware.com>
Instead of always adding CMAKE_SHARED_LIBRARY_LINK_<LANG>_FLAGS to
executables, or just when the ENABLE_EXPORTS property is set (CMP0065),
make sure that the target platform also actually supports shared
libraries. If not, then the executable cannot possibly provide symbols
to them anyway.
On Solaris there is a global typedef called 'single':
/usr/include/floatingpoint.h:77:15: note: shadowed declaration is here
typedef float single;
Avoid shadowing it by using a different name.
1fe39020 QtAutogen: Port away from cmLocalGenerator.
59a729b2 QtAutogen: Split initializer class into separate file.
1e83a963 QtAutogen: Split initializer methods into separate class.
12f0e13c QtAutogen: Simplify generator initialization API.
65ff75d3 QtAutogen: Remove unnecessary dereference.
64b78c14 QtAutogen: Move Source initialization to prior loop.
c3c20d3c QtAutogen: Add _automoc.cpp sources before initializing.
8b6ec29d QtAutogen: Move initialization condition to caller.
9470b056 QtAutogen: Move condition to prior loop.
b7491b1c QtAutogen: Move condition to prior loop.
e791c854 QtAutogen: Make some methods static.
6210ec64 QtAutogen: Make internal method private.
a3ceb998 QtAutogen: Don't use members to initialize automoc targets.
dced2fe1 QtAutogen: Rename variable.
f9a77e76 QtAutogen: Don't use a member to store skipped uic files.
c3633e7a QtAutogen: Add missing includes and forward declarations.
9298f56d CPack: allow packaging of empty directories
ecd71c9c SystemTools: time operations on directories
19c6f4ee SystemTools: set time file permissions
749a140a CPackDeb: allow empty directories in component packages
The Ninja generator and Visual Studio generators are special-cased for the
QtAutogen feature. In order to reduce the number of custom targets, the Visual
Studio generators prefer to create custom commands instead, and in order to
create appropriate Ninja files, generated rcc files are listed as byproducts.
This requires the use of the GetConfigCommonSourceFiles API of the
cmGeneratorTarget for those generators when initializing the autogen target.
The initializer method is called from Compute() after the cmGeneratorTarget
objects are created, however the initialization of the object directory occurs
later in the InitGeneratorTargets method. That means that the resulting object
locations are computed incorrectly and cached before the object directory is
determined, so the generated buildsystem can not find the object files.
The initialization of the object directory was split from the creation of
cmGeneratorTarget instances in commit 0e0258c8 (cmGlobalGenerator: Split
creation of generator object from initialization., 2015-07-25). The motivation
for the split was to do only what is essential to do early in cases where
cmGeneratorTargets need to be created at configure-time. That is required for
the purpose of implementing policies CMP0024 and CMP0026, and for
try_compile(LINK_LIBRARIES). However, the split was not really necessary.
Compute the object directory in the cmGeneratorTarget constructor instead.
The QtAutogen unit test already tests the use of TARGET_OBJECTS with AUTOMOC,
and that test already passes on Ninja. The reason it already passes is that
the QtAutogen target also uses the AUTORCC feature, and specifies several qrc
files in its SOURCES. Later in the Compute algorithm (after the
InitGeneratorTargets call), the rcc files are determined and target->AddSource
is called. The AddSource call clears the previously mentioned cache of source
files, causing it to be regenerated when next queried, this time taking account
of the object directory.
Extend the test suite with a new target which does not make use of AUTORCC with
qrc files so that the test added alone would break without the fix in this
commit.
When we generate a ".rule" file to attach a custom command in a VS IDE
project, set the file timestamp to be old enough to prevent the rule
from re-running due to its timestamp.
Some commands on Windows do not understand forward slash paths and
require backslashes. In order to help projects generate shell
invocations of such commands, provide a generator expression to convert
paths to the shell-preferred path format for the current generator.
This will allow custom commands to generate paths the same way CMake
does for compiler command invocations.
Ensure that all targets have their _automoc.cpp before attempting
to initialize the autogen target. The initialization evaluates
generator expressions for target sources, and must include the
_automoc.cpp of object library dependents in order for TARGET_OBJECTS
to include the object file for the corresponding _automoc.cpp file.
The latter is now the preferred URL for visiting cmake.org with a
browser. Convert using the shell code:
git ls-files -z | xargs -0 sed -i 's|http://www\.cmake|https://cmake|g'
In the Ninja generator we run all build rules from the top of the build
tree rather than changing into each subdirectory. Therefore we convert
all paths relative to the HOME_OUTPUT directory. However, the Convert
method on cmLocalGenerator restricts relative path conversions to avoid
leaving the build tree with a "../" sequence. Therefore conversions
performed for "subdirectories" that are outside the top of the build
tree always use full paths while conversions performed for
subdirectories that are inside the top of the build tree may use
relative paths to refer to the same files.
Since Ninja always runs rules from the top of the build tree we should
convert them using only the top-level cmLocalGenerator in order to
remain consistent. Also extend the test suite with a case that fails
without this fix.
The changes in commit 47b060ae (CPackDeb: allow empty directories in
component packages, 2015-09-21), commit b58de9fe (CPack: allow packaging
of empty directories, 2015-09-21), and commit b761e90d (CPack: remove
accidental changes, 2015-09-22) regressed packaging of CMake itself.
Revert the changes until they can be revised and rebased on other
changes that make additional fixes.
8bfff686 cmLocalGenerator: Compute object max path on construction.
2c2479fb cmGlobalGenerator: Create all local generators after Configure().
194bb068 cmGlobalGenerator: Remove unused method.
c5f07e05 cmGlobalGenerator: Create local generators after all makefiles configured.
dd408de4 cmGlobalGenerator: Create local generator after configuring the makefile.
8a88089b cmMakefile: Create the local generator after configuring the makefile.
934aa454 Makefiles: Remove need to create local generator at configure time.
61b48e70 Makefiles: Port to cmOutputConverter.
In TryCompileCode we construct an internal argv[] vector that needs to
have a fake argv[0] so our internal cmake command line looks like a real
command line. Fix construction of the fake argv[0] when try_compile is
called without the CMAKE_FLAGS argument. Otherwise the first internal
-DVAR=val argument that we use to pass information like
CMAKE_OSX_SYSROOT is ignored.
The changes in commit c96fe0b4 (cmake: Add -W options to control
deprecation warnings and errors, 2015-07-28) fail to account for
-Wdev warnings produced by places in CMake other than message().
This causes a regression in which -Wno-dev fails to suppress such
warnings. Revert the feature until it can be revised accordingly.
When using "cmake --build ." or "MSBuild ALL_BUILD.vcxproj" to drive the
build the dependencies in the .sln file are not considered. This means
that ProjectReference elements in .vcxproj files are used to order
targets. We must ensure that the ZERO_CHECK target is listed as the
first dependency of every target so that when it causes regeneration of
the build files then MSBuild has not yet loaded the updated files.
Refactor cmGlobalVisualStudioGenerator::TargetCompare to store the name of
the target that should come first instead of hard-coding "ALL_BUILD".
Update client sites to specify "ALL_BUILD" when ordering for .sln files
and an empty string otherwise (in cases when "ALL_BUILD" should not be
encountered anyway).
Set policy CMP0065 to the value used in the calling project.
Set the the value of CMAKE_ENABLE_EXPORTS if set in the calling
project to initialize the target property appropriately.
2514e426 CMP0026: Use compatibility codepath until configure is finished (#15748)
b98f7712 cmGlobalGenerator: Add API for the configure step being finished.
b5de2bd9 cmLocalGenerator: Simplify condition.
Use it instead of the similar cmMakefile API. It is necessary to
know that the Configure step is completely done, not just that one
particular cmMakefile is finished configuring.
Prior to commit 611220f7 (cmTarget: Use reliable test for CMP0024 and CMP0026
OLD., 2015-07-25), this was determined by checking whether cmGeneratorTargets
exist yet, which happens after the Configure step.
Add ctest command-line options:
--test-output-size-passed <n>
--test-output-size-failed <n>
to set the amount of test output to store in Test.xml as a command-line
dashboard client.
e134e53b Add support for *.manifest source files with MSVC tools
da00be63 MSVC: Rewrite manifest file handling with Makefile and Ninja
d488b5c9 Ninja: Always add OBJECT_DIR variable to link rules
6d620f5a VS: Add manifest tool settings to VS 8 and 9 project files
becb14c9 CPack/DEB: test preserve extra config file permissions
7044e8ee CPackDeb: use of libarchive and removal of fakeroot
415405a3 cmArchiveWrite: control user/group, permissions and recursive file adding
4f2ff601 Tests: Make RunCMake.CPack error messages more readable
81b748ae cmGeneratedFileStream: Fix spelling in comment
Fixes#15685, where the right Qt5 dlls on Windows were not packaged because
they were not found when relying on the PATH environment variable.
Also some cleanup of code introduced in 8120e13f, but no longer needed with 678aaad1.
Classify .manifest sources separately, add dependencies on them, and
pass them to the MS manifest tool to merge with linker-generated
manifest files.
Inspired-by: Gilles Khouzam <gillesk@microsoft.com>
Add a helper class private to "cmcmd.cxx" to contain the implementation.
Update the link logic to use the intermediate files directory for each
target to hold manifest and resource files before embedding into the
binary. Preserve the old behavior of placing the .manifest file next
to the binary when not linking incrementally even though it will be
embedded.
7a6e5f06 Tests: Cover find_program when the environment duplicate some HINTS
40122975 Merge branch 'fix-bad-search-ordering' into test-search-ordering
02440154 find_*: Fix search order when the environment duplicates some HINTS
7046eedd ccmake: Use more-portable call to set_field_buffer (#15740)
da1a02f7 ccmake: Avoid using non-portable 'curcol' field (#15739)
6c442e5a ccmake: Pass format string to 'printw' (#15738)
'curcol' is an implementation detail of ncurses so other implementations
of 'form' may not have it. The switch-to-previous-field logic only
exists for overloaded requests of REQ_DEL_PREV, so no need to check for
REQ_DEL_CHAR. For REQ_DEL_PREV, check if the field changed and if it
did, change it back.
Support for C11's _Thread_local was introduced in GCC in the 4.9 series,
even though we make the C11 compiler flags available in CMake with GCC
>= 4.6.
FreeBSD's runetype.h uses _Thread_local, which causes CMake's own build
to fail when using GCC < 4.9 and -std=gnu11:
/usr/include/runetype.h:92:22: error: expected '=', ',', ';', 'asm' or '__attribute__' before 'const'
extern _Thread_local const _RuneLocale *_ThreadRuneLocale;
Add a test for _Thread_local support and only build CMake itself with
C11 support if it works.
Bug: http://www.cmake.org/Bug/view.php?id=15741
Refactoring in the topic merged by commit v3.2.0-rc1~400 (Merge topic
'refactor-search-path-construction', 2014-11-13) introduced a bug that
filters out duplicate paths in an incorrect order. Restore the search
path to its documented order even when duplicate paths are present.
Reported-by: Marc CHEVRIER <marc.chevrier@sap.com>
5d6aa364 cmLocalGenerator: Always return the end snapshot state of a directory.
3f4e5e8c cmState: Return end snapshot for GetBuildsystemDirectoryParent.
With 64-bit Windows builds, there is no need to remove the leading
underscore from all the symbols. This is because it does not have one
in the .obj file unless it is really in the name. This did not cause
any trouble until VS 2015 which has some system functions that have a
leading underscore that end up in the .def file.
This is needed for proper makefile progress tracking.
The cmLocalGenerator is constructed at configure-time, but only used
at generate time. The StateSnapshot member is currently populated
before configuring, so use the Makefile to get the end snapshot.
This is the appropriate snapshot for future use. Existing users
of this method are mostly just calling GetDirectory on the result,
but the progress tracking of the Makefile generator needs a consistent
snapshot to be used, so the end snapshot should be consistently used.
This is a change in behavior from CMake 3.3, but there is no semantic meaning
to empty entries in buildsystem properties. This also restores behavior to
that of CMake 2.8.10.
This is a change in behavior from CMake 3.3, but there is no semantic meaning
to empty entries in buildsystem properties. This also restores behavior to
that of CMake 2.8.10.
This reverts commit d4736d53cd.
RtlGetVersion is a private API not meant for public use. Another
solution to detecting the Windows version will be needed.
Reported-by: Gilles Khouzam <Gilles.Khouzam@microsoft.com>
04de9007 GHS: Fix generated file path slashes and quoting for 6.1.6
fbe0de92 GHS: Tell MULTI to delete .elf.ael file
63591b94 GHS: Find latest 'int' directory
Since commit v2.8.11~59^2 (cmSystemTools: Generalize TrimWhitespace to
all whitespace, 2013-03-27) we incorrectly use `c <= ' '` to determine
if `c` is a whitespace character. With a signed `char` type UTF-8
encoded strings may be truncated because values above 0x7f appear
negative and therefore less than 0x20. Use `isspace(c)` instead.
Extract the logic added by commit v3.1.0-rc1~386^2 (Encoding: Fix debug
asserts ... with non-ascii chars, 2014-06-16) into a helper function so
we can re-use it.
b9856862 Tests: Cover set_property for buildsystem target properties
407ff47e cmTarget: Fix memory leak when SOURCES property is cleared
cf74fc24 cmTarget: Fix buildsystem property empty value set and append operations
8ea7611b find_program: Optionally consider all names in each directory
fc1990c9 cmFindProgramCommand: Re-implement search using more flexible approach
fdbfc9f6 Tests: Add explicit testing for find_program
907a919b cmSystemTools: Drop unused StringEndsWith method
ed4de3c9 cmFindProgramCommand: Use Names member instead of passing it
bf32b95e cmFindLibraryCommand: Avoid repeating search for the same name
Refactoring in commit 1f54bc1c (cmTarget: Split storage of include
directories from genexes, 2015-08-04), commit 772ecef4 (cmTarget: Split
storage of compile options from genexes, 2015-08-04), commit 44e071ae
(cmTarget: Split storage of compile features from genexes, 2015-08-04),
and commit 197f4de1 (cmTarget: Split storage of compile definitions from
genexes, 2015-08-04) failed to account for value==NULL in SetProperty
and AppendProperty methods.
When more than one value is given to the NAMES option this command by
default will consider one name at a time and search every directory for
it. Add a NAMES_PER_DIR option to tell this command to consider one
directory at a time and search for all names in it.
Avoid using KWSys SystemTools::FindProgram because it does much more
than we actually need for find_program and does not allow us to control
the order of preference between directories and names. Create our own
cmFindProgramHelper much like cmFindLibraryHelper but without all the
find_library-specific parts.
In FindNormalLibraryDirsPerName we consider one name at a time and
search the entire path. Avoid repeated consideration of names by
removing each one from the list of candidates before considering the
next one. This will not change behavior because we already know the
earlier candidates were not found on repeated considering anyway.
Determine the Desktop SDK for Windows Phone and Windows Store from the
generator instead of the version of the targeted app. This allows to
build a Windows Phone 8.1 app on VS 2015 for example.
ad262917 Xcode: Add unit test for iOS project install (#12506)
48fe617e Fix installation of iOS targets (#12506)
d2c2319d Replace CMAKE_XCODE_EFFECTIVE_PLATFORMS with call to PlatformIsAppleIos
Instead of searching for source files in a couple hard-coded
locations, we now search the source and binary directory for files
matching both the name of the covered file and its package
directory structure.
The call to CreateFile added by commit ac0bb433 (VS: Windows Store/Phone
package cert thumbprint, 2015-08-21) passes a wide character path
explicitly so we should call CreateFileW directly. Otherwise it does
not build without -DUNICODE (e.g. in bootstrap on MSYS).
The changes to cmComputeLinkInformation.cxx in commit 675ef165 (Allow
LINK_SEARCH_{START,END}_STATIC props to have default values, 2015-08-07)
are unrelated to the feature added by that change and are incorrect.
They lead to cases of extra -Bdynamic flags. Revert them.
616d8f02 cmGeneratorTarget: Rename method to match operation.
ec56d244 cmGlobalGenerator: Process evaluation files after target depends.
1e5349a5 cmGlobalGenerator: Access makefile from makefiles container.
2b9a25d7 cmGlobalGenerator: Create global targets directly after Configure.
3e08b4df cmMakefile: Skip Global targets for CMP0019 evaluation.
357bf469 cmGlobalGenerator: Fill the project map at compute time.
ebf8d0a9 cmGlobalGenerator: Rename method.
bd096d30 cmGlobalGenerator: Avoid cmLocalGenerator until after Configure.
ff8ac8ee cmLocalGenerator: Create from already-constructed cmMakefile.
0bd7279f Ninja: Remove some incorrect comments adding no value.
2f2d4da9 cmCTestScriptHandler: Simplify deletes.
7fdc9a8b QtAutogen: Use a smart pointer.
92041eec cmGlobalGenerator: Remove MakeLocalGenerator method.
acb00622 cmGlobalGenerator: Require a snapshot to create a local generator.
83b8a927 cmMakefile: Remove cmLocalGenerator member.
9b6a743b cmLocalGenerator: Remove Parent pointer.
Teach cmSystemTools::MakefileColorEcho to use the color printing API
only when we actually have a color to print. This avoids printing
escape sequences that do not change the text attributes.
Since commit v3.3.0-rc1~480^2~4 (Makefile: Fix output during parallel
builds, 2015-02-05) we always use this code path to print progress and
rule messages even when color is disabled (e.g. in a try_compile). It
is important to avoid printing escapes when there is no color because on
MSYS we have no isatty and so assume that vt100 escapes are supported,
but we do not want to print them when capturing try_compile output.
If we capture the vt100 escapes in try_compile output, they contain
unbalanced square brackets. This causes CMakeParseImplicitLinkInfo
to fail to separate lines in a ;-list and therefore fail to extract
information from the link line. Then mixed-language linking breaks.
Remove use of cmXMLSafe from CTest when generating content that is later
handled by cmXMLWriter. This was broken by refactoring in the topic
merged by commit v3.3.0-rc1~22 (Merge topic 'ctest-xml-refactor',
2015-05-28).
637c56b4 cmGlobalGenerator: Implement FillProjectMap in terms of cmState.
b3f2299e cmState: Move ProjectName from cmMakefile.
6ce940ac cmMakefile: Use std::string in ProjectName API.
e8c0341d cmMakefile: Out-of-line GetProjectName.
867b5be8 cmLocalGenerator: Remove unused Children member.
6c832219 cmLocalGenerator: Implement child traversal in terms of cmState.
3fcf3837 Makefiles: Remove valueless cast.
223f4a66 cmLocalGenerator: Simplify condition.
ae026f54 cmState: Store Children states in parent state.
7fbc56ac cmGlobalUnixMakefileGenerator3: Implement progress in terms of cmState.
65c434e1 cmGlobalUnixMakefileGenerator3: Inline an IsExcluded call.
be56feb6 cmGlobalGenerator: Extract new IsExcluded overload.
45f52003 cmGlobalGenerator: Implement IsExcluded in terms of cmState::Snapshot.
af9fc277 cmState: Make Snapshot EqualityComparable.
9b44018d cmGlobalGenerator: Convert IsExcluded to loop.
5f05b562 cmGlobalGenerator: Refactor IsExcluded.
95925a60 cmGlobalGenerator: Don't use else after return.
Since cmTarget::ComputeOutputDir results can be used in CMake code of script
cmake_install.cmake and in Xcode internals, string ${EFFECTIVE_PLATFORM_NAME}
should be used instead of $(EFFECTIVE_PLATFORM_NAME) because it works for both.
Value of CMAKE_CFG_INTDIR can't be used in BUILD_TYPE argument of install
command since it contains $(EFFECTIVE_PLATFORM_NAME) (e.g. equals to
`Release-iphoneos`, `Debug-iphoneos`, etc.).
Currently the CMAKE_XCODE_EFFECTIVE_PLATFORMS property acts only as
a kind of toggle switch to enable iOS project layout features.
But instead of relying on this undocumented property, better detect
the presence of an iOS SDK directly.
04e708d8 Remove use of include <cmsys/IOStream.hxx> from KWSys
e8585f45 Remove use of include <cmsys/stl/*> and cmsys_stl::*
6db713c0 Remove use of include <cmsys/ios/*> and cmsys_ios::*
3fa1b964 cmGlobalUnixMakefileGenerator3: Change the progress container key.
55e39276 cmState: Make it possible to order cmState::Snapshot.
04168cbb cmGlobalUnixMakefileGenerator3: Rename member.
2394584c cmGlobalGenerator: Rename progress initializer method.
b9eb3cd1 cmGlobalGenerator: Move LG to target map to subclass.
f5d2b7a6 cmGlobalGenerator: Remove clearance of map.
heaptrack showed a 1 byte allocation with the backtrace pointing
here, as is the case since commit v3.3.0-rc1~112^2~5 (cmPolicies:
Remove unused cmPolicy class., 2015-05-03)
Store the definitions in a cmLinkedTree in the cmMakefile. This can
be moved to cmState and then the tree will provide snapshotting
possibilities. It will also make the Closure copy created at
the start of each cmMakefile unnecesarry.
Refactoring in commit 6ed9c7e0 (cmState: Host buildsystem properties for
directories, 2015-07-18) broke include_directories(BEFORE). Fix it and
add a test case.
Since support for generator expressions was added to OUTPUT_NAME it is
possible for project code to cause recursion in this method by using a
$<TARGET_FILE> genex. Detect and reject such cases.
CMAKE_<LANG>_OUTPUT_EXTENSION tells us the proper extension for the
current toolchain. Teach the ComputeObjectFilenames method to use
GetLanguageOutputExtension to look up the extension instead of
hard-coding ".obj". This is already done in the code path for explicit
file names inside our call to GetObjectFileNameWithoutTarget.
In the get_filename_component command, add a new BASE_DIR parameter to
use with the ABSOLUTE and REALPATH options. This will be used when
finding an absolute path from a relative path.
4071a747 curl: Update README-CMake.txt for new snapshot
7727d485 curl: Update configuration of build within CMake
3f2f1a94 curl: Fix check for gethostbyname_r with 5 arguments
91e8d35a Merge branch 'curl-upstream' into update-curl
602cdc06 cmCurl: Tolerate lack of CURLOPT_CAPATH support
70654261 curl 7.44.0 (reduced)
Use the CMAKE_LINK_SEARCH_START_STATIC and CMAKE_LINK_SEARCH_END_STATIC
variables to initialize the LINK_SEARCH_START_STATIC and
LINK_SEARCH_END_STATIC target properties respectively.
The change in commit 27252b24 (cmComputeLinkInformation: Simplify
generator object access, 2015-08-02) broke the conditional use of a
target introduced in commit 41abdc17 (cmGeneratorTarget: Move GetSOName
from cmTarget, 2015-08-04). Restore the conditional lookup. Add a test
case that hacks platform information variables to trigger this code
everywhere.
Since curl 7.39 the CURLOPT_CAPATH setting may be rejected with a
CURLE_NOT_BUILT_IN error. Simply tolerate this with silent failure
since we just will not use the CAPATH setting in this case.
If {ARCHIVE,LIBRARY,RUNTIME}_OUTPUT_DIRECTORY is set with a genex then
do not add the per-config subdirectory on multi-config generators.
This will allow projects to use $<CONFIG> to place the per-config
part of the directory path somewhere other than the end.
8c076a8b cmTarget: Remove unused AddSystemIncludeDirectories overload
5790aca4 target_include_directories: Support relative SYSTEM include dirs (#15464)
The compiler version reported since commit v2.8.2~1018 (CTest-side
support for compiler name and compiler version, 2009-10-12) only
reported the version of the compiler used to build CMake, and only
if it defined "_COMPILER_VERSION". Instead use the version of
the compiler used to build the project CTest is testing.
6d8a125e cmQtAutoGenerators: Prefer a generator to access global generator.
5f66900e cmGlobalGenerator: Port Find API to cmMakefile.
c5b8841f cmGlobalGenerator: Create global targets from cmMakefiles.
8f75ea3b cmGlobalGenerator: Port global target creation to cmMakefile.
56f0540b cmGlobalGenerator: Port Configure-time check to cmMakefile.
19b546ef cmGlobalGenerator: Base final target property computation on Makefiles.
f8be9ba9 cmGlobalGenerator: Base progress on Makefiles, not LocalGenerators.
bc1097e3 cmExportLibraryDependenciesCommand: Port to cmMakefile.
204aecdf cmGlobalGenerator: Port configure-time code to cmMakefile.
3dd6f0a5 cmake: Port configure-time code to cmMakefile.
73e4df99 cmGlobalGenerator: Store a container of cmMakefiles.
19369937 cmGeneratorTarget: Port internal type to cmGeneratorTarget.
32f131b0 cmGeneratorTarget: Prefer the local generator to access the global.
29886ce7 cmTarget: Use a simpler delete algorithm.
197f4de1 cmTarget: Split storage of compile definitions from genexes.
44e071ae cmTarget: Split storage of compile features from genexes.
772ecef4 cmTarget: Split storage of compile options from genexes.
1f54bc1c cmTarget: Split storage of include directories from genexes.
7568199b cmTarget: Request only the link libraries where needed.
10040601 cmLinkImplementationLibraries: Move to namespace scope.
d9da6ee2 cmLinkItem: Split to separate file.
27252b24 cmComputeLinkInformation: Simplify generator object access.
d035e968 get_filename_component: Fix bug where CACHE was ignored.
38ed5866 get_filename_component: Added initial tests for PROGRAM component.
772ca69f get_filename_component: Tests now check for proper CACHE usage.
If PROGRAM_ARGS is provided to get_filename_component, fix bug where the
command failed to honor the CACHE argument.
Added test cases to RunCMake.get_filename_component that fail when the
bug is not fixed to prevent regressions.
Signed-off-by: James Johnston <johnstonj.public@codenest.com>
nmake and jom generators no longer warn about missing INCLUDE/LIB
environment variables unless the C/CXX compiler cannot be found. This
is useful if the user does not want to use these generators with the
Visual C++ compiler, or they do not want to enable any language.
a309409e cmOrderDirectories: Port to cmGeneratorTarget.
f83e8402 cmGeneratorTarget: Move CompileInfoMap from cmTarget.
b3f0e353 cmGeneratorTarget: Move GetCompilePDBDirectory from cmTarget.
34c43741 cmGeneratorTarget: Move GetOutputName from cmTarget.
4329a71c cmComputeLinkDepends: Port to cmGeneratorTarget.
c93230ac cmComputeLinkInformation: Port to cmGeneratorTarget.
ee26add4 cmGeneratorTarget: Move IsBundleOnApple from cmTarget.
c8a5f5ae cmMakefileTargetGenerator: Add accessor for GeneratorTarget.
f8076644 cmGeneratorTarget: Move GetLinkClosure from cmTarget.
7c809fa2 cmGeneratorTarget: Move GetLinkerLanguage from cmTarget.
6da99de3 cmGeneratorTarget: Move GetFrameworkDirectory from cmTarget.
d6bb319b cmGeneratorTarget: Move GetFullName from cmTarget.
7a460852 cmGeneratorTarget: Move GetAppBundleDirectory from cmTarget.
d560bfd2 cmGeneratorTarget: Move GetInstallNameDir* from cmTarget.
89e2a080 cmGeneratorTarget: Move GetMacContentDirectory from cmTarget.
62720e44 cmGeneratorTarget: Move GetFullNameComponents from cmTarget.
...
Our explicit list of characters that require quoting does not account
for non-ascii characters (e.g. UTF-8) that also need quoting. Invert
the logic to quote a string unless it contains exclusively a set of
characters we whitelist.
Bill Hoffman
Brad King
Ty Smith
Kitware Robot
Robert Dailey
Zack Galbreath
Robert Maynard
Bartosz Kosiorek
Sean McBride
Nils Gladitz
Stephen Kelly
Simon Levermann
Raffi Enficiaud
Tim Grothe
Gregor Jasny
Andrew Shaitorov
Geoff Viola
Derek Bruening
Colin Tracey
Gilles Khouzam
Chuck Atkins
Domen Vrankar
Mike Pagel
Stefan Kislinskiy
Robert Goulet
Roman Wüger
Clinton Stimpson
Thomas Klausner
Joerg Sonnenberger
Raphael Kubo da Costa
Daniel Pfeifer
Páder Rezső
Felix Geyer
Bastien Schatt
James Johnston
Francois Best