Diagnostics which check the sanity of exported include paths
previously skipped over any path containing a generator expression.
Introduce a policy to issue an error message in such cases.
The export files created in the OLD behavior are not usable, because
they contain relative paths or paths to the source or build location
which are not suitable for use on installation. CMake will report an
error on import.
Code such as
target_include_directories(foo INTERFACE
$<INSTALL_INTERFACE:include$<FOO>>
)
should be treated as a relative directory, despite the genex, after
the INSTALL_INTERFACE is stripped away.
Previously, this would generate a relative directory on export, which
would be an error on import, so no policy is needed.
Code such as
install(TARGETS ...
INCLUDES DESTINATION $<INSTALL_INTERFACE:include>
)
should behave as if the INSTALL_INTERFACE wrapper were not present.
In code such as
install(TARGETS ...
INCLUDES DESTINATION $<FOO>include
)
the generator expressions are evaluated at generate-time. Delay
determining whether each entry is a relative path until after
the generator expressions are evaluated. Such relative paths
are based relative to the CMAKE_INSTALL_PREFIX.
Treat paths which are relative and which contain a generator
expression which is not at the beginning as relative to the
source directory.
This matches the behavior of paths which are relative but contain
no generator expression at all.
Previously this would generate a relative path with the IMPORTED
target on export(), which would be a reported as a non-existent
path on import. If used directly in the buildsystem, it would be
reported as a relative path, which is also an error. There is no
need for a policy in this case.
Add the "-e" option to build.make invocations of wmake as part of
the silencing flags. From "wmake /?":
-e erase files after error (no prompt)
This prevents test timeouts on error.
As an INTERFACE_LIBRARY has no direct link dependencies, we can
short-circuit in cmGeneratorExpressionEvaluator and
in cmGlobalGenerator::CheckLocalGenerators.
As they do not generate any output directly, any generate- or install-
related code acn also be short-circuited. Many of the local generators
already do this.
Because only INTERFACE related properties make sense on INTERFACE_LIBRARY
targets, avoid setting other properties, for example via defaults.
Just enough to reach the BuildMacContentDirectory method and the
NeedRelinkBeforeInstall methods.
In the future, those methods can be moved to cmGeneratorTarget.
Define a custom ordering functor to deterministically and strictly
order the cmTarget* key. Otherwise the order would be dependent on
runtime pointer values, which breaks assumptions of some generators.
The functor orders first by target name, and then by directory. Multiple
global targets may have the same name, such as edit_cache, but their
directory differentiates them.
This allows avoiding error-prone hard-coding of literal
string lengths.
Borland is not able to process the template version of this
method. Make it use the macro version instead. This means
that Borland will also use the macro versions of cmArray*.
Download http://www.gnu.org/licenses/old-licenses/lgpl-2.1.txt and place
it as Licenses/LGPLv2.1.txt in our source tree. When building cmake-gui,
use option CMake_GUI_DISTRIBUTE_WITH_Qt_LGPL to enable notification
in the "About" dialog of how the distribution of Qt is licensed.
Install the license file as ${CMAKE_ROOT}/Licenses/LGPLv2.1.txt so that
the dialog can display a path to it.
This variable can be useful in cross-compiling contexts where the
sysroot is read-only or where the sysroot should otherwise remain
pristine.
If the new CMAKE_STAGING_PREFIX variable is set, it is used instead
of CMAKE_INSTALL_PREFIX when generating the installation rules in
cmake_install.cmake.
This way, the CMAKE_INSTALL_PREFIX variable
always refers to the installation prefix on the target device, regardless
of whether host==target.
If any -rpath paths passed to the linker contain the CMAKE_STAGING_PREFIX,
the matching path fragments are replaced with the CMAKE_INSTALL_PREFIX.
Matching paths in the -rpath-link are not transformed.
The cross-prefix usr-move workaround is assumed not to require extension
regarding CMAKE_STAGING_PREFIX. The staging area is a single prefix, so
there is no scope for cross-prefix symlinks. The CMAKE_INSTALL_PREFIX
is still used to determine the workaround path, and that variable
remains the relevant one even if CMAKE_STAGING_PREFIX is used. If the
generated export files are deployed to the target, the workaround
will still be in place, and still be employed if required.
15eeace cmTarget: Trivially make more API const.
be9dfb6 cmTarget: Make GetExportMacro const.
0794c13 cmTarget: Make NameResolvesToFramework const.
1c27521 cmGlobalGenerator: Make NameResolvesToFramework const.
37554ac cmMakefile: Make FindTarget const.
8841d73 cmMakefile: Make IsAlias const.
36e31cd cmTarget: Make GetInterfaceLinkLibraries const.
04d398d cmTarget: Make GetTargetSourceFileFlags const.
50d1520 cmTarget: Make custom command accessors API const.
0f87643 cmGeneratorTarget: Make GetIncludeDirectories const.
a990722 eclipse: Support custom natures via a global property
51726cc eclipse: Add natures for Eclipse based on enabled languages
4a352d4 Notify extra generators about languages
7cd65c9 Add CMAKE_SYSROOT variable to set --sysroot when cross compiling.
5096967 Allow toolchain files to specify an external toolchain.
76552d5 Add compiler target compile options.
f41ecd1 CMakeDetermineCompilerId: Look for internal file only on host
As CMAKE_ROOT_FIND_PATH can be a list, a new CMAKE_SYSROOT is
introduced, which is never a list.
The contents of this variable is passed to supporting compilers
as --sysroot. It is also accounted for when processing implicit
link directories reported by the compiler, and when generating
RPATH information.
Clang can compile code, but uses the gcc tools for other tasks such
as linking. The -gcc-toolchain option can be used for that, but
generalize so that other compilers can be treated the same.
If such a location is specified, use it as a hint for finding
the binutils executables.
For clang, this allows passing -target <triple> to the compiler, and
for qcc, -V<arch> using toolchain files containing something like
set(triple arm-linux-gnueabihf)
set(CMAKE_C_COMPILER "/usr/bin/clang")
set(CMAKE_C_COMPILER_TARGET ${triple})
set(CMAKE_CXX_COMPILER "/usr/bin/clang++")
set(CMAKE_CXX_COMPILER_TARGET ${triple})
or
set(arch gcc_ntoarmv7le)
set(CMAKE_C_COMPILER /opt/qnx650/host/linux/x86/usr/bin/qcc)
set(CMAKE_C_COMPILER_TARGET ${arch})
set(CMAKE_CXX_COMPILER /opt/qnx650/host/linux/x86/usr/bin/QCC)
set(CMAKE_CXX_COMPILER_TARGET ${arch})
Both clang and qcc are inherently cross compiler( driver)s.
When cross-compiling with clang, use the CMAKE_${lang}_COMPILER_TARGET
as the _CMAKE_TOOLCHAIN_PREFIX to find the appropriate binutils.
When cross-compiling with QNX qcc, use the CMAKE_${lang}_COMPILER_TARGET
to set the appropriate _CMAKE_TOOLCHAIN_PREFIX.
Some generators can use the any enabled languages to add extra support
in the relevant build tool. One such is Eclipse since there are many
plugins available for various languages.
After warning that a help output format is no longer supported, fix the
return value from cmDocumentation::CheckOptions to indicate that it was
still a help option that was parsed. Otherwise CMake moves on to treat
the help output file name as a source tree and complains that it does
not exist.
4cce44b Help: Document the CMAKE_MAKE_PROGRAM variable in more detail
558c74d VS: Switch to internal CMAKE_MAKE_PROGRAM lookup by generators
5229f2d Tests: Do not use an explicit make program for VS generators
72dd738 Tests: Fix MFC test heuristic for empty CMAKE_TEST_MAKEPROGRAM
fd6076d Tests: Pass CMAKE_MAKE_PROGRAM instead of --build-makeprogram
68031ab Tests: Configure SubProject-Stage2 test more robustly
003d10c Tests: Simplify VSExcludeFromDefaultBuild configuration
e47d934 Tests: Simplify VSProjectInSubdir configuration
e965cb1 Tests: Simplify CTest.BuildCommand.ProjectInSubdir configuration
72bf255 Tests: Pass --build-options to every test
4d1d772 ctest: Teach --build-options to allow zero options
96966b5 ctest: Make the --build-makeprogram optional for --build-and-test
91a0211 Simplify some calls to cmGlobalGenerator::Build
123a060 Teach GenerateBuildCommand to find its own make program
5f5c92b VS: Add internal APIs to find MSBuild, devenv/VCExpress, and msdev
4ac75fd Prefer CMAKE_MAKE_PROGRAM over CMAKE_BUILD_TOOL (#14548)
...
Teach add_custom_target to check the policy too. Extend the policy to
disallow reserved target names that we use for builtin targets like
"all".
Extend the RunCMake.CMP0037 test to cover these cases.
Fix CMAKE_<LANG>_CREATE_SHARED_LIBRARY_FORBIDDEN_FLAGS implementation to
only remove whole flags. Without this n the Mac we were incorrectly
removing -w from -Wno-write-strings.
Since commit 42ba1b08 (VS: Separate compiler and linker PDB files,
2013-04-05) the VS generators no longer add ProgramDataBaseFileName.
Therefore we should allow projects to do so by mapping the /Fd option.
For VS >= 10 our flag tables map /Fd to ProgramDataBaseFileName already.
Add the mapping for VS 7, 8, and 9.
Drop the "Modules/CMakeVS*FindMake.cmake" files. Override the
cmGlobalGenerator::FindMakeProgram method for VS generators to use their
internal APIs to locate the build tool. Set the CMAKE_MAKE_PROGRAM as a
normal variable for use by project code, but do not cache it. This will
allow CMake and CTest to select the proper tool at build time.
The --build-options option consumes all following arguments until either
--build-target or --test-command. Fix the logic to allow this to be
zero options.
GenerateBuildCommand now knows how to lookup CMAKE_MAKE_PROGRAM or
choose a generator-provided default build tool. Therefore the
--build-makeprogram can now be optional and simply override the
default selection when provided.
Note that with --build-nocmake we now need to load the cache in order to
make the CMAKE_MAKE_PROGRAM entry available to GenerateBuildCommand.
Code paths that look up CMAKE_MAKE_PROGRAM from the cache only to
pass it to Build, which only passes it to GenerateBuildCommand,
no longer need to do so. GenerateBuildCommand now knows how to
look up CMAKE_MAKE_PROGRAM in the cache when no explicit value
is given, so simply pass 0 now.
Add a cmGlobalGenerator::SelectMakeProgram method to select a
caller-provided make program, the CMAKE_MAKE_PROGRAM cache entry, or a
generator-provided default. Call it from all implementations of the
GenerateBuildCommand method with the corresponding generator's default,
if any.
Historically these were both added for the Makefile and Visual Studio
generators, respectively. Later the VS generators started using the
CMAKE_MAKE_PROGRAM cache entry to find the IDE build tool, and the
CMAKE_BUILD_TOOL was simply set as an alias.
Fix the documentation to explain that CMAKE_MAKE_PROGRAM is the modern
variable and that CMAKE_BUILD_TOOL is the compatibility alias, not the
other way around. Replace uses of CMAKE_BUILD_TOOL with
CMAKE_MAKE_PROGRAM in CMake-provided modules. Nothing needs to lookup
CMAKE_BUILD_TOOL in the cache, so simply set it as a normal variable.
All cmGlobalGenerator::GenerateBuildCommand call sites that need to
produce a string now generate "cmake --build" commands. The remaining
call sites immediately pass the result to cmSystemTools::RunSingleCommand.
Avoid the intermediate string and argument parsing by directly producing a
vector of strings. Also drop the ignoreErrors argument because no call
sites remain that use it.
This avoids requiring cmGlobalGenerator::GenerateBuildCommand to produce
a string so that it can be later refactored to produce a vector with no
quoting or escaping. It also makes the ctest_build command match what
"ctest -T Build" would run in a build tree configured with the new
build_command() command behavior. It also ensures that the native build
tool used matches that selected by the configuration of the tree to be
built.
Re-implement the build_command() command to use "cmake --build" instead
of generating a native build tool invocation directly. This command
will internally invoke the proper native build tool.
This avoids requiring cmGlobalGenerator::GenerateBuildCommand to produce
a string so that it can be later refactored to produce a vector with no
quoting or escaping. It will also allow us to later teach CMake to
delay the decision about which build tool to invoke until after the
project build system is generated to disk. For example, on Visual
Studio 10 and above the preferred command-line tool is MSBuild, but we
need to fall back to devenv if the .sln has Intel Fortran .vfproj files.
Create a GenerateCMakeBuildCommand method to generate a command-line
string invoking "cmake --build" for a given target and configuration.
Optionally allow the "-i" make flag and additional native options.
This is a virtual method that is overridden by every generator
subclass. The base class implementation should never be called,
so replace it with a dummy implementation.
bf755c7 set: Add unit tests for set/unset PARENT_SCOPE
bc280f1 set: Fix handling of empty value with PARENT_SCOPE
20afbd5 set: Handle value-less PARENT_SCOPE explicitly
06b0dbe OS X: Drop version number from CMake.app bundle name (#11693)
84af42b Configure NSIS-packaged CMake version and install destination
7655029 Configure NSIS-packaged CMake documentation link in Start Menu
Just as
set(VAR "")
sets VAR to an empty string in the current scope, the code
set(VAR "" PARENT_SCOPE)
is documented to set the variable to an empty string in the parent
scope. Fix the implementation to make it so.
The code "set(VAR PARENT_SCOPE)" unsets VAR in the parent scope.
Implement this case explicitly next to where "set(VAR)" is explicitly
handled to unset VAR in the current scope.
3bade75 Help: Parse Copyright.txt instead of using current year
2bbf6bd Copyright.txt: Add test to check year range
3ee67d0 Copyright.txt: Update year range to end in 2013
621ba1f cmake-gui: Parse Copyright.txt instead of duplicating notice
993b685 bootstrap: Parse Copyright.txt instead of duplicating notice
Always name the application bundle "CMake.app". Users can rename it
after installation if they wish. This is the typical approach used by
OS X applications, including Xcode. It allows CMake to be upgraded
without manually re-running CMake in every build tree to update the path
to CMake. It also makes the executable location in the CMake build tree
more predicatable.
Refactor edit_cache tool selection to ask each global generator for its
preference. Teach the Ninja generator to always use cmake-gui because
Ninja by design cannot run interactive terminal dialogs like ccmake.
Teach the Makefile generator to use cmake-gui when also using an "extra"
generator whose IDE has no terminal to run ccmake, and otherwise fall
back to CMAKE_EDIT_COMMAND selection for normal Makefile build systems.
dcac9be Make accessors for compile-related information const.
19a8a3c cmTarget: Don't finalize include directories in GetIncludeDirectories.
3305364 cmGlobalGenerator: Rename the FinalizeCompileDefinitions method.
Rename cmSystemTools::FindExecutableDirectory to FindCMakeResources.
Teach it to compute the locations of cmake, ctest, cpack, ccmake, and
cmake-gui executables, and the location of CMAKE_ROOT. Provide this
information from static cmSystemTools::Get<resource>() methods.
Refactor code that needs these locations to use the new APIs.
Teach FindCMakeResources to use the OS X system API to lookup the
executable location. When running from the CMake build tree itself,
leave a file in the tree that FindCMakeResources can use to read the
location of the source tree. This avoids the need to compile the source
tree location into a binary that may be installed and used without the
source tree.
Teach the QtDialog on OS X to create a "cmake-gui" symlink in the build
tree next to "cmake" and the other tools, as is already done in the
install tree for the application bundle. This ensures a consistent set
of executables are available in one directory.
Replace the std::map<>::clear() method with one that first deletes
the cmExportSet instances held by each map entry, and then clears.
Otherwise the cmGlobalGenerator::ClearGeneratorMembers added by
commit 5cf1120f (cmGlobalGenerator: Refactor member cleanup between
configures, 2013-11-04) leaks the cmExportSet instances.
This change causes the GetLinkInterfaceDependentStringProperty method,
called in SetupAutoGenerateTarget, after the creation of generator
targets. In CMake 4.0, the GetLinkInterfaceDependentStringProperty
will move to the cmGeneratorTarget class, and this patch is a necessary
prerequisite to that.
The SetupAutoGenerateTarget method will soon be invoked at a later
time in a followup commit. We need to ensure that we create the
utility autogen target early.
In commit 18412153 (Refactor cmTarget::GetCompileDefinitions...,
2013-06-06) cmQtAutomoc was refactored to get all compile definitions
from the target instead of separately asking the target and querying the
directory-level COMPILE_DEFINITIONS property value. While the
generation process does integrate directory-level COMPILE_DEFINITIONS
into the target definitions, this did not happen until after Automoc
targets are constructed. Therefore the commit regressed use of
directory-level definitions in Automoc targets.
Factor the definition finalization logic out from the
cmGlobalGenerator::CreateGeneratorTargets method into a new
cmGlobalGenerator::FinalizeTargetCompileDefinitions method and call it
before constructing Automoc targets. This will place the
directory-level definitions into the target in time to use them for the
Automoc targets.
Extend the QtAutomoc test to cover this case.
Do not access an argument index not known to exist.
Port the change from commit 9ef66f2b (cmake: Validate -E cmake_automoc
argument count, 2013-11-05) to the new location of the code.
Factor member cleanup out from cmGlobalGenerator::Configure and the
destructor into a dedicated helper to avoid duplication. This fixes
clearing of BuildExportSets between configures.
In the CMake interactive dialogs cmGlobalGenerator::Configure may
run more than once. Clear the cmGlobalGenerator::EvaluationFiles
data between configures to avoid accessing deleted data.
b51696f CMP0022: Update target_link_libraries plain signature documentation
25b7f87 Merge branch 'policy-CMP0022-fixes' into policy-CMP0022-fixes-for-master
0a561a0 CMP0022: Warn about a given target at most once
23d21b7 Do not export INTERFACE_LINK_LIBRARIES from non-linkable targets
ef10b87 CMP0022: Plain target_link_libraries must populate link interface
0e06788 CMP0022: Add test for target_link_libraries plain signature
c0f4a61 CMP0022: Add unit test for null pointer check and message.
4b0cfa7 Merge branch 'output-CMP0022-entries' into policy-CMP0022-fixes
Resolve conflict in Source/cmTarget.cxx by integrating the changes to
the internal copy constructor from both sides. Also resolve a logical
conflict by dropping the special case for INTERFACE_LIBRARY targets.
Since cmTarget::SetMakefile already forces CMP0022 to NEW for such
targets we need no special handling.
Resolve conflict in Source/cmTargetLinkLibrariesCommand.h by dropping
the documentation change. We will make the same change in the new
location of the same documentation in a separate commit.
Resolve conflicts in
Tests/RunCMake/CMP0022/CMP0022-WARN-empty-old-stderr.txt
Tests/RunCMake/CMP0022/RunCMakeTest.cmake
by taking the side from the 'policy-CMP0022-fixes' branch.
Since cmTarget::ComputeLinkInterface is called separately for each
"head" target that links a target, the warning we produce when
CMP0022 is not set could be repeated. Add explicit logic to allow
the warning to appear at most once. Multiple copies of the warning
for the same target are almost always identical and therefore
redundant. In the rare case that two copies of the warning are
different, the second can appear in a future run after the first
is fixed.
When cmExportFileGenerator::SetImportLinkInterface exports the old
LINK_INTERFACE_LIBRARIES property values it skips doing so for
non-linkable targets because target->GetLinkInterface returns NULL for
such targets.
Since cmExportFileGenerator::PopulateInterfaceLinkLibrariesProperty
looks at the INTERFACE_LINK_LIBRARIES property directly instead of using
the computed link interface, teach it to skip exporting the property if
target->IsLinkable returns false.
Extend the RunCMake.CMP0022 test with a case covering this. Simply
export an executable target that links to a library that is not
exported.
The CMP0022 NEW behavior is that the INTERFACE_LINK_LIBRARIES property
exactly defines the link interface. The plain target_link_libraries
signature says linking is transitive by default, so it should populate
the property.
Teach the target_link_libraries plain signature to populate the
INTERFACE_LINK_LIBRARIES regardless of the CMP0022 setting. Refactor
the cmTarget::ComputeLinkInterface checks that warn when the policy is
not set to compare the new property to either the explicitly set old
link interface properties or the link implementation fallback for all
linkable target types, not just static libraries.
This fixes a regression in 2.8.12.0 that caused target_link_libraries to
not implement transitive linking in the plain signature once the policy
CMP0022 is set to NEW.
In commit c4373b33 (cmTarget: Make GetProperty() const, 2013-10-29)
we accidentally changed the cmFindCommon.cxx logic in a way that
looks like a local experiment leftover that went unnoticed due to
the size of the other changes in the commit. Revert it.
Make sure that CMakeCache.txt is the last file being removed since
the binary directory may be left in a state that is no longer
removable otherwise.
Also retry removal a couple of times which makes this more robust
on windows where file locks may temporarily prevent removal.
In commit c4373b33 (cmTarget: Make GetProperty() const, 2013-10-29)
we accidentally changed the cmTargetLinkLibrariesCommand.cxx logic
in a way that looks like a local experiment leftover that went
unnoticed due to the size of the other changes in the commit.
Revert it.
If a symlink fails to extract and the host system is Windows then report
a warning and skip the entry instead of failing. This will allow
archives containing symbolic links to be extracted on Windows with
somewhat gracefully degraded behavior.
Simplify extraction message logic to be easier to follow and to write a
newline before any error messages that may be produced. Also flip
handling of the archive_write_header return code to handle success in
the "then" case and failure in the "else" case.
Teach cmGlobalGenerator::CheckTargets to include OBJECT_LIBRARY targets
in the check for source file existence.
Extend the RunCMake.ObjectLibrary test to cover this case.
Address warnings:
Source/QtDialog/CMakeSetupDialog.cxx:1233:15:
warning: declaration of 'cursor' shadows a member of 'this' [-Wshadow]
Source/QtDialog/CMakeSetupDialog.cxx:1260:15:
warning: declaration of 'cursor' shadows a member of 'this' [-Wshadow]
by renaming the local variable to 'textCursor'.
Teach the cmGeneratorExpressionEvaluator filesystem artifact logic
to reject OBJECT_LIBRARY targets since they have no main artifact.
Without the explicit rejection evaluation falls through to an
internal CMake error message in cmTarget::GetOutputInfo.
Extend the RunCMake.GeneratorExpression test to cover these cases.
b54dbeb Test foreach/function/macro handling of bracket arguments
ccdf7e0 macro: Do not substitute for placeholders in bracket arguments
999abb9 macro: Add extra indentation to placeholder substitution code
Instead of removing the depot name, which causes problems when looking
at the file change list in CDash, make the Update test remove a given
prefix from the files retrieved from Update.xml.
This has follow-on effects for other methods and classes. Further
work on making the use of const cmTarget pointers common can be
done, particularly with a view to generate-time methods.
It only generates a default constructed SourceEntry for each
cmSourceFile.
this->Internal->SourceEntries[sf];
in cmTargetTraceDependencies::Trace has the same effect, and is called
early in generation-time for each source file anyway.
638843a Remove the Location member from cmTarget.
90ef1cf Move GenerateTargetManifest to cmGeneratorTarget.
25f1df3 Split CreateGeneratorTargets into two methods.
Simply print out the lines as normal paragraph text. Teach the
CMakeLib.testRST test to cover this syntax. Update the
cmake-developer.7 manual to document support for the directives.
It is never used. Presumably it only exists so that a const char * can
be returned from GetLocation. However, that is getting in the way
now, so use a static std::string instead, which is already a common
pattern in cmake.
9c87d9c Add automatic rcc invocation for Qt.
84218e1 Add automatic uic invocation for Qt.
94a0ca6 Record which files are skipped by automoc.
18fb758 Run the main executable created in the autogen tests.
e485ba1 Rename the QtAutomoc tests to QtAutogen.
7ce65c3 Add extra checks for the AUTOMOC target property.
32771fc Update output messages for generic use.
f371ab5 Rename RunAutomoc to RunAutogen.
85b3d6e Extract an SetupAutoMocTarget method.
ca124a1 Rename the AutomocInfo.cmake file to be more generic.
a342c9f Move some makefile definitions up away from moc-specific code.
98632ef Add the AUTOGEN_TARGETS_FOLDER and obsolete AUTOMOC_TARGETS_FOLDER.
63378ba Rename some variables to reflect broader scope.
97f1aa3 Rename method to reflect generic use.
4abb111 Rename local variable to reflect generic use.
03878c9 Move variable set to where it is used.
...
Rename the Visual Studio >= 10 generators to indicate the version year:
Visual Studio 10 => Visual Studio 10 2010
Visual Studio 11 => Visual Studio 11 2012
Visual Studio 12 => Visual Stduio 12 2013
Report the names with the year to the list of available generators so
that the cmake-gui drop-down shows the years. When selecting a
generator from the "-G" option or from an existing CMAKE_GENERATOR cache
entry, recognize names without the years for compatibility and map them
to the names with years.
Update the generator names in the cmake-generators.7 manual.
3e04946 Require CMAKE_<LANG>_COMPILER to be found as a full path
6007f7c CMakeDetermineCompilerId: Always use compiler detected from IDE
332771c CMakeDetermine*Compiler: Remove temporary cache entry
All generators now support detection of the full path to the compiler, so
require it to be so. This will allow CMake<LANG>Information.cmake and
other logic to assume the full path to the compiler tool is available.
The Makefile generators already rejected CMAKE_<LANG>_COMPILER values
that did not name an existing compiler. Extend this error message to
all generators, make it occur as early as possible, and improve the
message with advice about how to set the compiler. If the full path to
the compiler is not known, finish enabling languages with a fatal error
so configuration does not continue.
For now, allow the RC language compiler to not be a full path. Later we
will need to detect the full path to "rc" under the VS IDE.
Add a RunCMake.CompilerNotFound test to cover failure cases.
Fix the RunCMake.CompilerChange test EmptyCompiler case to work
when configuration does not continue past enable_language.
ff59365 CTest: fix dashboard issues associated with the ctest-fix-run-serial topic
7a665ae CTest: added test for RUN_SERIAL issue #14484384beff CTest: added comments that describe the basic test sorting approach
adbe00d CTest: removed redundant copy of test dependency set
1b750cb CTest: perform cycle test early
6d4d7ca CTest: consider previously failed tests before all others
e809d8c CTest: prioritize tests by their depth in the dependency graph
44017a4 CTest: handle dependent and non dependent test requirements equally
ff6c401 cmTarget: Add interface for compatible numeric properties
e4e20c1 cmTarget: Add enumeration for consistency to expect from properties.
9877769 cmTarget: Assign consistent content back to the property being evaluated.
816b4a8 cmTarget: Make consistentProperty return consistent content.
030800a cmTarget: Add a template to create correct implied content.
Teach the ctest_update implementation to use the p4 command-line
client to perform updates and extract the list of changes.
Add a CTest.UpdateP4 test like those that exist already for the other
version control tools. Make the test available when p4 and the p4d
server are found. During the test launch p4d in the background to
serve a repository from the test directory. Then direct the client
toward this server for the duration of the test.
Only valid target names or generator expressions may appear in
the target field of a LINK_ONLY expression.
Other content like link flags should still be added to that property
(wrapped in config-specific generator expressions), but not wrapped
in LINK_ONLY. Otherwise undue warnings would be issued for the
policy CMP0022.
The LINK_ONLY expression only has an effect for actual target
names anyway, so there is no logical deficit.
Since commit c9a5f34b (Cleanup use of CMake version in install
destinations, 2013-09-26) we use the full CMake version in default
install destinations. For rapidly changing versions of the form
<major>.<minor>.<patch>.<date>-g<commit>[-dirty]
used by developers this is too granular. Instead use just
<major>.<minor>.<patch>
as the version for default install destinations. This will still
be granular enough for unique directories in releases.
On Cygwin continue to use the full ${CMake_VERSION} as was the case
prior to the above-mentioned commit.
The source files are already processed by cmQtAutomoc to look for
moc includes, so extend that to also look for ui_ includes and
find corresponding .ui files to process.
This replaces the need to invoke qt4_wrap_ui().
As the ui files are not likely to be part of the SOURCES of the
target, store the options associated with them separately in the
cmMakefile for querying during the autogen run.
There is no need for a "cmake_automoc" backward compatibility command
because it is internal, undocumented, and only executed from a matching
version of cmake.
When using the boost MPL library, one can set a define to increase
the limit of how many variadic elements should be supported. The
default for BOOST_MPL_LIMIT_VECTOR_SIZE is 20:
http://www.boost.org/doc/libs/1_36_0/libs/mpl/doc/refmanual/limit-vector-size.html
If the foo library requires that to be set to 30, and the independent
bar library requires it to be set to 40, consumers of both need to set
it to 40.
add_library(foo INTERFACE)
set_property(TARGET foo PROPERTY INTERFACE_boost_mpl_vector_size 30)
set_property(TARGET foo PROPERTY COMPATIBLE_INTERFACE_NUMBER_MAX boost_mpl_vector_size)
target_compile_definitions(foo INTERFACE BOOST_MPL_LIMIT_VECTOR_SIZE=$<TARGET_PROPERTY:boost_mpl_vector_size>)
add_library(bar INTERFACE)
set_property(TARGET bar PROPERTY INTERFACE_boost_mpl_vector_size 40)
# Technically the next two lines are redundant, but as foo and bar are
# independent, they both set these interfaces.
set_property(TARGET bar PROPERTY COMPATIBLE_INTERFACE_NUMBER_MAX boost_mpl_vector_size)
target_compile_definitions(bar INTERFACE BOOST_MPL_LIMIT_VECTOR_SIZE=$<TARGET_PROPERTY:boost_mpl_vector_size>)
add_executable(user)
target_link_libraries(user foo bar)
Because the TARGET_PROPERTY reads the boost_mpl_vector_size property
from the HEAD of the dependency graph (the user target), and because
that property appears in the COMPATIBLE_INTERFACE_NUMBER_MAX of
the dependencies of the user target, the maximum value for it is
chosen for the compile definition, ie, 40.
There are also use-cases for choosing the minimum value of a number.
In Qt, deprecated API can be disabled by version. Setting the
definition QT_DISABLE_DEPRECATED_BEFORE=0 disables no deprecated
API. Setting it to 0x501000 disables API which was deprecated before
Qt 5.1 etc.
If two dependencies require the use of API which was deprecated in
different Qt versions, then COMPATIBLE_INTERFACE_NUMBER_MIN can be
used to ensure that both can compile.
Otherwise, in the string case, we would get a null pointer instead
of the implied empty string. That will become relevant when the
comparison result is used.
When scanning CMake module files for .rst comments, recognize
bracket comments starting in ".rst:" too. For example:
#[[.rst:
Include the bracket comment content terminated by the closing bracket.
Exclude the line containing the bracket if it starts in "#".
Teach the CMakeLib.testRST test to cover multiple bracket lengths
and ending brackets on lines with and without "#".
Update the cmake-developer.7 manual to document the bracket-comment
syntax for .rst documentation.
Teach the CMake language lexer to treat the \-LF pair terminating a
line ending in an odd number of backslashes inside a quoted argument
as a continuation. Drop the pair from the returned quoted argument
token text. This will allow long lines inside quoted argument
strings to be divided across multiple lines in the source file.
It will also allow quoted argument text to start on the line after
the opening quote. For example, the code:
set(x "\
...")
sets variable "x" to the value "..." with no opening newline.
Previously an odd number of backslashes at the end of a line inside
a quoted argument would put a \-LF pair (or a \-CR pair) literally
in the argument. Then the command-argument evaluator would complain
that the \-escape sequence is invalid. Therefore this syntax is
available to use without changing behavior of valid existing code.
Teach the RunCMake.Syntax test to cover cases of quoted arguments
with lines ending in \, \\, and \\\. Odd counts are continuations.
Drop all behavior activated by setting CMAKE_BACKWARDS_COMPATIBILITY to
a value lower than 2.4, and generate an error when projects or the user
attempt to do so. In the error suggest using a CMake 2.8.x release.
Teach cmake_minimum_required to warn about projects that do not require
at least CMake 2.4. They are not supported by CMake >= 3.0.
Replace the documentation of CMAKE_BACKWARDS_COMPATIBILITY with a
reference to policy CMP0001.
d169b1f Genex: Use cmArraySize for targetPolicyWhitelist
86d5d80 Genex: Remove use of TransitiveWhitelistCompare
73d7705 Add some templates for cleaner array iteration.
Other warnings for the same policy already have similar output since
commit 81d2793e (Add differing target property content to policy CMP0022
warning, 2013-09-11).
The cmRST implementation and the list of capabilities documented in the
cmake-developer.7 manual must be kept in sync. Add a note to each file
to reference the other.
Add cmCommand::Disallowed helper to check the setting of a policy that
disallows the command. Add a RunCMake.DisallowedCommands test
placeholder. Add a Help/policy/DISALLOWED_COMMAND.txt file for
inclusion by each policy document to avoid duplication of the common
text.
Teach cmRST to recognize non-markup lines ending in '::' followed by a
blank line as starting a literal block. Record the whole block as if it
were a literal block directive and print it just like a code block.
Extend the CMakeLib.testRST test to cover such cases.
Move the ProcessDirectiveParsedLiteral and ProcessDirectiveCodeBlock
method internals into an OutputMarkupLines helper. Pass through it a
new "inlineMarkup" parameter and teach OutputLine to understand it.
When false, do not process inline markup. Extend the CMakeLib.testRST
test to cover the two cases.
CMake/Source/cmGeneratorExpressionParser.cxx: In member function ‘void cmGeneratorExpressionParser::ParseGeneratorExpression(std::vector<cmGeneratorExpressionEvaluator*>&)’:
CMake/Source/cmGeneratorExpressionParser.cxx:116:55: warning: conversion to ‘unsigned int’ from ‘long int’ may alter its value [-Wconversion]
CMake/Source/cmGeneratorExpressionParser.cxx:240:39: warning: conversion to ‘int’ from ‘long int’ may alter its value [-Wconversion]
Add a string(CONCAT) command to simply concatenate input arguments
together. This will be useful for combining strings from different
quoting syntaxes. Add a RunCMake.string test covering these cases.
Teach the Xcode generator to set 'lastKnownFileType' to be 'folder' for
file references that are directories. If you set 'explicitFileType' to
'sourcecode', then Xcode cannot browse the directory.
Introduce a policy to control the behavior.
The AliasTargets unit test already tests that using a
double-semicolon in the name is not an error. Change the ExportImport
test to use a namespace with a double-semicolon too.
The result is that the depends of the target are created.
So,
add_library(somelib foo.cpp)
add_library(anotherlib EXCLUDE_FROM_ALL foo.cpp)
add_library(extra EXCLUDE_FROM_ALL foo.cpp)
target_link_libraries(anotherlib extra)
add_library(iface INTERFACE)
target_link_libraries(iface INTERFACE anotherlib)
Executing 'make iface' will result in the anotherlib and extra targets
being made.
Adding a regular executable to the INTERFACE of an INTERFACE_LIBRARY
will not result in the executable being built with 'make iface' because
of the logic in cmComputeTargetDepends::AddTargetDepend.
So far, this is implemented only for the Makefile generator. Other
generators will follow if this feature is possible for them.
Make INTERFACE_LIBRARY targets part of the all target by default.
Test this by building the all target and making the expected library
EXCLUDE_FROM_ALL.
Teach the VS 7-9 generators to honor the
VS_DOTNET_TARGET_FRAMEWORK_VERSION
target property. This was already done for VS >= 10 by commit cfe6300a
(VS: Add support for .NET target framework version, 2013-06-14).
Inspired-by: mar.na@t-online.de
187385a cmCoreTryCompile: Fix typo in comments.
af2a3ab cmTarget: Remove unused variable.
620b0e9 target_link_libraries(): Fix code snippet in documentation.
2d4ce80 cmPolicies: Fix typo
d6dd264 include(): Use lower case and () to refer to the include() command.
765d783 cmSystemTools: Drop old RunCommand method
52b80b2 exec_program: Re-implement using KWSys Process
c076476 cmake: Drop "cmake -E comspec" Win9x helper
f551135 cmExtraEclipseCDT4Generator: Replace RunCommand with RunSingleCommand
daa0f6f Add Lua-style long brackets and long comments to CMake language
a8c6523 cmListFileLexer: Convert CRLF -> LF newlines explicitly
dbd9333 cmListFileLexer: Allow a leading UTF-8 Byte-Order-Mark (#11137)
5645783 cmListFileLexer: Allow command names with one letter (#14181)
Drop use of cmSystemTools::RunCommand. It used popen on UNIX
(equivalent to /bin/sh -c "$command") and direct CreateProcess calls on
Windows. Implement equivalent behavior using the KWSys Process library.
Copy windows shortpath conversion logic from cmSystemTools::RunCommand.
Enable the --use-stderr behavior by default and ignore the old option.
Passing through the pipes allows color terminal output and other things
to work as if one ran the native build command directly.
d14898b Intel: Fix detection of MSVC version simulated by pre-11.0 Fortran
a85e17e Intel: When simulating MSVC, re-use Windows-MSVC (#14476)
af40e8c VS: Detect Intel Fortran compiler id and version
b8522a8 VS: Expose Intel Fortran .vfproj format version to CMake language
2d36c9a CMakeDetermineCompilerId: Fix Intel Fortran compiler id detection
a6fd17c VS: Fix CMAKE_<LANG>_COMPILER detection with Intel toolset (#14471)
Lookup the Intel VS plugin version on demand in the VS global generator,
compute the corresponding .vfproj format version number, and memoize it.
Add it as a CMAKE_VS_INTEL_Fortran_PROJECT_VERSION platform definition.
These policies were introduced after 2.8.12 in anticipation of 2.8.13.
However, we've now decided the next release will be 3.0.0, so update the
version of introduction accordingly.
The full policy documentation was moved to Help/policy/*.rst by commit
f051814e (Convert builtin help to reStructuredText source files,
2013-10-15). We no longer need the builtin string literals.
In commit 87cc62ca (Drop "full" documentation output types, 2013-09-13)
we dropped code using the LongDescription field of policy definitions.
We need to follow it up with a change similar to commit 399e9c46 (Drop
builtin property documentation, 2013-09-16) to remove the policy
documentation. Do that now. Keep the short description as it is used
in policy error and warning messages.
This has not been allowed since they were introduced in
commit 91438222 (target_link_libraries: Add LINK_(PUBLIC|PRIVATE)
options, 2011-10-07), but allowing this form makes it more compatible
with the newer PUBLIC and PRIVATE keywords.
Teach the CMake language parser to recognize Lua-style "long bracket"
arguments. These start with two '[' separated by zero or more '='
characters e.g. "[[" or "[=[" or "[==[". They end with two ']'
separated by the same number of '=' as the opening bracket. There is no
nesting of brackets of the same level (number of '='). No escapes,
variable expansion, or other processing is performed on the content
between such brackets so they always represent exactly one argument.
Also teach CMake to parse and ignore "long comment" syntax. A long
comment starts with "#" immediately followed by an opening long bracket.
It ends at the matching close long bracket.
Teach the RunCMake.Syntax test to cover long bracket and long comment
cases.
Read input files in binary mode instead of text mode and convert CRLF
newlines to LF newlines explicitly in our own buffer. This is necessary
to read CMake source files with CRLF newlines on platforms whose C
runtime libraries do not transform newlines in text mode. For example,
a Cygwin or Linux binary may not transform CRLF -> LF in files read from
a Windows filesystem. Perform the conversion ourselves to ensure that
multi-line string literals in CMake source files have LF newlines
everywhere.
Teach the lexer to read a UTF-8, UTF-16 BE/LE, or UTF-32 BE/LE
Byte-Order-Mark from the start of a file if any is present. Report an
error on files using UTF-16 or UTF-32 and accept a UTF-8 or missing BOM.
Teach the lexer to treat a single letter as an identifier instead of an
unquoted argument. Outside of a command invocation, the parser treats
an identifier as a command name and an unquoted argument as an error.
Inside of a command invocation, the parser treats an identifier as an
unquoted argument. Therefore this change to the lexer will make what
was previously an error case work with no other behavioral change.
9b212ad Make --help-* options available from all command-line tools
5dde65a Help: De-duplicate manual/(cmake|ccmake).1.rst build options
ae944d1 Help: Organize manual/*.1.rst sections
4f7d708 Help: Drop leftover conversion content from manual/*.1.rst
Check for "cmake -E ..." up front (along with "cmake --build ...") and
skip normal command line processing. Drop the special handling for -E
from the normal processing to simplify things. Strictly speaking, it
was previously possible to invoke command mode with -E anywhere in the
command line e.g. "cmake echo -E message" or "cmake echo message -E",
but no one should be using it as it was not documented and looks
strange.
Make the standard --help-* options available from all command-line
tools. Drop options that are no longer supported:
--copyright, --help-full, --help-html, --help-man,
--help-compatcommands, --help-custom-modules
De-duplicate Help/manual/*.1.rst help options by using an
OPTIONS_HELP.txt file included from each manual.
7038a93 Modules/readme.txt: Update steps to add module documentation
a77e308 CPack: Replace #<type> markup with reStructuredText equivalent
e7ca48f Help: Factor out cmake-generator-expressions manual page
97e8650 Help: Factor out COMPILE_DEFINITIONS disclaimer duplication
8982161 Help: Factor out find_* command duplication
30b2186 Help: Factor out *_OUTPUT_(NAME|DIRECTORY).rst duplication
bfe07aa Build Help documentation during CMake build using Sphinx
53ded59 Drop unused builtin documentation APIs
0c39a75 Drop the 'Full' field from cmDocumentationEntry
e33d8d2 Drop builtin command documentation
399e9c4 Drop builtin property documentation
6035c04 get_property: Drop test for builtin property documentation
80a3273 Drop all documentation formatters except Usage
b336a1eb Teach COMPATIBLE_INTERFACE_* checks to use Help .rst documents
ec6df36 Teach --help-* options to load documentation from .rst files
25f2877 Add class cmRST to do basic reStructuredText processing
...
Drop all DefineProperty calls for non-chained properties. Drop the
documentation from the chained ones. The documentation for all
properties is now in Help/prop_*/*.rst files.
We now need only the Usage formatter to support command-line options
that print basic usage, and the supporting indented=>preformatted markup
processor to support CMake message formatting. Drop all other
documentation formatters and move the remaining code up into the top
cmDocumentationFormatter class.
These checks want to know if named target properties are builtin, which
is now known by checking the Help/prop_tgt directory. (Previously the
check could be confused by a define_property call in the project.)
Install the Help directory next to Modules to make it available in CMake
distributions. Use cmRST to read Help .rst documents and print them as
help output.
Add options
--help-manual-list
--help-manual
to list available manuals or print one of them. Implement the options
--help-commands
--help-modules
--help-policies
--help-properties
--help-variables
by mapping to the corresponding manual page. Implement the options
--help-command-list
--help-module-list
--help-policy-list
--help-property-list
--help-variable-list
by globbing the available Help .rst documents of the corresponding type
and reading their titles. Implement the options
--help-command
--help-module
--help-policy
--help-property
--help-variable
by globbing the matching Help .rst document(s) and printing them.
Create a cmRST class to perform just enough reStructuredText processing
to support display of Help documents in human-readable text format.
This will be used to implement --help-* command-line options.
Support directives "include", "replace", "parsed-literal", "toctree"
(Sphinx), and "cmake-module" (CMake Sphinx Extension to scan .cmake
modules). Support inline CMake Sphinx Domain roles to convert
cross-references to corresponding title text. Support inline
substitutions defined by the "replace" directive, but keep it simple by
requiring replacements to be defined before use.
Add a CMakeLib "testRST" case to cover processing of supported
constructs and compare results against expected output.
We will no longer support full documentation generation from executables
and will instead generate documentation with other tools. Disable (with
a warning left behind) the command-line options:
--copyright
--help-compatcommands
--help-full
--help-html
--help-man
Drop supporting code. Drop manual sections generation from executables.
Remove internal documentation construction APIs. Drop unused sections
See Also, Author, Copyright, Compat Commands, Custom Modules.
Temporarily add a RST formatter to convert builtin documentation to .rst
source files. This will be removed shortly after we use it to convert
documentation.
Teach the RST formatter to:
* Output preformatted blocks as reStructuredText "::" literal blocks.
* Output option lists as bullet lists with option names enclosed in
reStructuredText ``literal`` quoting.
* Output individual documentation objects (commands, variables, etc.)
in separate .rst files organized in directories by type.
Replace references to cmVersion::GetCMakeVersion() in builtin
documentation with the literal placeholder "|release|" that will be
defined as a substitution later.
With our modern development workflow it is less likely a property will
be added to C++ code without documentation. This mode only existed to
support the DocTest which had very limited coverage of the properties
anyway.
Factor the CMAKE_DATA_DIR, CMAKE_DOC_DIR, and CMAKE_MAN_DIR selection
out of CMakeLists.txt and into a Source/CMakeInstallDestinations.cmake
script. Load the script from the original location of the code.
Cache the destination values as empty strings so we know if the user
sets them explicitly. If not, then compute defaults based on the
platform and full CMake version string. By not caching the versioned
defaults, we can change them in a single build tree as the version
changes.
Remove duplication of the install destination defaults from the
bootstrap script. Cache empty defaults there too. Parse from the CMake
code the default values to report in the help output. Keep the CMake
code in a structured format to make this reliable.
Move logic to compute CMake_VERSION out of the top-level CMakeLists.txt
file to a dedicated Source/CMakeVersionCompute.cmake module and include
it from the original location. This will allow it to be re-used.
a4263c9 export(): Handle multiple dependent export sets.
66b290e export(): Process the export() command at generate time.
5fe5c32 export(): Set a Makefile on the cmExportBuildFileGenerator.
e383555 cmExportInstallFileGenerator: Fix comment to match reality.
list(APPEND) has been able to append nothing since commit a06dcdba
(Allow LIST(APPEND) command to append nothing, 2008-01-16) but the
documentation still used to imply that at least one argument is
required.
The final location and name of a build-target is not determined
until generate-time. However, reading the LOCATION property from
a target is currently allowed at configure time. Apart from creating
possibly-erroneous results, this has an impact on the implementation
of cmake itself, and prevents some major cleanups from being made.
Disallow reading LOCATION from build-targets with a policy. Port some
existing uses of it in CMake itself to use the TARGET_FILE generator
expression.
The export-sets topic, merged in commit 49c7b649 (Merge topic
'export-sets', 2012-10-01) changed install(EXPORT) to allow
exporting targets whose dependents are exported separately
to different locations. Doing the same for export() was not
possible because the export() command was executed at
configure-time.
Now that export() is also executed at generate-time, make it
possible to export to multiple dependent export sets.
Make the API for adding targets string based so that it can easily
use cmGeneratorTarget.
Teach the cmIncludeCommand to generate the exported file at
configure-time instead if it is to be include()d.
The RunCMake.ExportWithoutLanguage test now needs a dummy header.h
file as expected error from export() is now reported after the
missing file error.
This is better than the cmCommand, because the lifetime of that is
not as useful, and it is only used to report an error anyway.
In the next commit, the cmExportBuildFileGenerator will outlive the
cmCommand.
Compilers for languages other than C and C++ on OS X may not understand
the -F framework search flag. Create a new platform information
variable CMAKE_<LANG>_FRAMEWORK_SEARCH_FLAG to hold the flag, and set it
for C and CXX lanugages in the Platform/Darwin module.
Reported-by: Vittorio Giovara <vittorio.giovara@gmail.com>
f973737 GenerateExportHeader: Port to use message(DEPRECATION)
f69606d Qt4Macros: Port to use message(DEPRECATION)
509c142 message: Add a DEPRECATION mode
54ef2be Haiku: Include files cleanup in cmCTest
38d5555 Haiku: Remove outdated preprocessor checks
1dc61f8 Haiku: Remove use of B_COMMON_DIRECTORY
7ebc1cb Haiku: Several fixes to platform module
1763c31 Set policy CMP0025 to NEW while building CMake itself
aa53ee5 Add policy CMP0025 for Apple Clang compiler id compatibility
ab65862 Clang: Add separate "AppleClang" compiler id
By default, the message is not issued. If CMAKE_ERROR_DEPRECATED
is on, the message is fatal. If CMAKE_WARN_DEPRECATED is on, the
message is a warning.
3d8356d Clang: Support Windows variants for GNU and MSVC (#13035, #14458)
51ab85c CMakeDetermineCompilerId: Add notion of "simulated" id/version
be10826 CMakeDetermineCompilerId: Fix local var init
This assumes that coverage.py has been run in such a way to produce its
standard XML output. This uses the Cobertura schema and should be somewhat
generalizable.
Add a new command line argument to ctest. This allows users to
rerun tests that failed during the previous call to ctest. This
is accomplished by analyzing the most recently modified file named
"^LastTestsFailed*" in the Testing/Temporary subdirectory of the
project's binary directory.
Add an unset() command option to remove a variable from the calling
scope, just like the set() command's PARENT_SCOPE option. Teach the
Unset test to cover such cases.
CMake is aware of the policy's NEW behavior and the AppleClang compiler
id. Set the policy to NEW explicitly to avoid the warning and get the
NEW behavior.
Also teach the RunCMake test infrastructure to build tests with
-DCMAKE_POLICY_DEFAULT_CMP0025=NEW to avoid the policy warning
in test output that must match specific regular expressions.
The parent commit introduced a separate "AppleClang" compiler id for
Apple's Clang distribution. Add a policy in order to support projects
that expect this compiler's id to be just "Clang". When the policy is
OLD or not set, map AppleClang back to Clang. Continue to use the
AppleClang id internally while enabling the language, but set the
CMAKE_<LANG>_COMPILER_ID after project() or enable_language() to the
compatible value for use by project code.
Apple distributes their own Clang build with their own version numbers
that differ from upstream Clang. Use the __apple_build_version__ symbol
to identify the Apple Clang compiler and report the Apple Build Version
as the fourth version component in CMAKE_<LANG>_COMPILER_VERSION. Add
Compiler/AppleClang-<lang> and Platform/Darwin-AppleClang-<lang> modules
that simply include the upstream equivalents.
Fix comparisons of CMAKE_<LANG>_COMPILER_ID to Clang in CMake's own
source and tests to account for AppleClang.
Currently, export() is executed at configure-time.
One problem with this is that certain exported properties like
the link interface may not be complete at the point the export() is
encountered leading to an incorrect or incomplete exported
representation. Additionally, the generated IMPORTED_LOCATION
property may even be incorrect if commands following the export()
have an effect on it.
Another problem is that it requires the C++ implementation of cmake
to be capable of computing the exported information at configure time.
This is a limitation on the cleanup and maintenance of the code. At
some point in the future, this limitation will be dropped and more
implementation will be moved from cmTarget to cmGeneratorTarget.
This target type only contains INTERFACE_* properties, so it can be
used as a structural node. The target-specific commands enforce
that they may only be used with the INTERFACE keyword when used
with INTERFACE_LIBRARY targets. The old-style target properties
matching LINK_INTERFACE_LIBRARIES_<CONFIG> are always ignored for
this target type.
The name of the INTERFACE_LIBRARY must match a validity generator
expression. The validity is similar to that of an ALIAS target,
but with the additional restriction that it may not contain
double colons. Double colons will carry the meaning of IMPORTED
or ALIAS targets in CMake 2.8.13.
An ALIAS target may be created for an INTERFACE library.
At this point it can not be exported and does not appear in the
buildsystem and project files are not created for them. That may
be added as a feature in a later commit.
The generators need some changes to handle the INTERFACE_LIBRARY
targets returned by cmComputeLinkInterface::GetItems. The Ninja
generator does not use that API, so it doesn't require changes
related to that.
6a47c37 add_test: Mention generator expressions in old-style add_test docs
d331292 cmTestGenerator: Evaluate generator expressions in test properties
6fe5c4a cmTestGenerator: Separate test properties for each configuration
6931999 VS6: Add some delimiting between error message and content.
d1a5f12 cmTarget: Fix typo in comment.
961c0ba Fix comments to match the code.
7cca50c Remove unused include.
This commit adds the ability to ccmake of cycling through cache options.
This uses the STRINGS property of the cache entry. The enter key will cycle
forward, and the right and left arrows will go up and down in the list.
Re-insert the semicolon which was removed during splitting.
Commit d777b8e7 (Genex: Allow relative paths in INSTALL_INTERFACE.,
2013-07-25) introduced the prefixItems method to allow relative paths
in the argument of the INSTALL_INTERFACE expression. That method was
buggy in that it did not re-introduce the semicolon separator in
the result.
This bug also affects paths which are already absolute in user code.
Some compilers try to simulate other compilers as a drop-in replacement
supporting all the same command-line options and predefined preprocessor
macros. In such cases it will be useful to have CMake load the compiler
information files for the simulated compiler instead of duplicating the
information. Teach CMakeDetermineCompilerId to extract the simulated
compiler id and version when the compiler id detection provides it.
Move the cmake::ExecuteCMakeCommand static method and all the static
methods it calls out of the 'cmake' class to a separate 'cmcmd' class.
Build the latter as part of the main cmake executable with cmakemain.cxx
and not in CMakeLib. Drop unused header includes from "cmake.cxx".
By moving this implementation out of cmake.cxx we avoid carrying it
around in all the executables that use class 'cmake'. It is needed only
for the main "cmake -E" functionality.
Xcode 2.1 through 4 supported $(CURRENT_ARCH) in a PBXFileReference
'path' value used in the "Link Binary with Libraries" build phase.
CMake uses this to reference object file locations on link lines to
bring in OBJECT library content. However, Xcode 5 now evaluates the
$(CURRENT_ARCH) reference in this context as "undefined_arch" so the
wrong path is given to the linker. There seems to be no alternative way
to produce an architecture-specific value in a PBXFileReference.
Fortunately Xcode 5 now also handles link dependencies for paths linked
through OTHER_LDFLAGS. For Xcode >= 5, move the OBJECT library object
file references from the link build phase to OTHER_LDFLAGS. We can
still show the object files in the source group listing in either case.
Xcode 5.0 now computes dependencies from files linked through
OTHER_LDFLAGS, so we no longer need the XCODE_DEPEND_HELPER hack to
re-link dependents when targets change.
In buggy code like
add_custom_command(
OUTPUT ${CMAKE_CURRENT_BINARY_DIR}/out.h
MAIN_DEPENDENCY ${CMAKE_CURRENT_SOURCE_DIR}/out.h.in
...)
add_custom_command(
OUTPUT ${CMAKE_CURRENT_BINARY_DIR}/out.h
...)
that has more than one rule to generate the same output CMake has always
used the first rule. However, since commit 2268c41a (Optimize custom
command full-path dependency lookup, 2013-08-06) we update the map from
output to cmSourceFile for every rule generating an output, effectively
keeping the last command instead of the first.
Fix this regression by checking for each map update if the output
already has an entry. If so, keep only the original entry. The VS 8
generator triggers this with a special case for generate.stamp rules
that differ between ZERO_CHECK and normal targets, so do not warn for
now. Leave a TODO comment for warning in the future.
Multiple libraries in a single buildsystem can be exported to multiple
export-sets.
If a library from one export set depends on a library from
another export set, the export logic generates a check in the targets
file to verify that the target in the other export set is found. That
check is executed at downstream-find_package-time.
However, a target may depend privately on a target in another export
set. In that case, the depend used to also be listed in the required
targets in the targets file. Change the export logic to ignore the
private link entries instead.
Resolve conflict in Source/cmTestGenerator.cxx by taking "their" side
(test-property-genex). It already accounts for the lower-case change in
"our" side (generate-modern-style).
The old-style add_test() call does not support generator expressions at
all. This also applies to the properties for the test, but it is not
mentioned at all.
This is useful for cases like:
add_test(NAME mytest COMMAND mydriver $<TARGET_FILE:myexe>)
set_tests_properties(mytest PROPERTIES
REQUIRED_FILES "$<TARGET_FILE:myexe>"
WORKING_DIRECTORY "${CMAKE_CURRENT_BINARY_DIR}/$<CONFIGURATION>"
)
In this example we require the actual test executable to exist to
run the test in addition to the test driver at argv[0]. Also the
$<CONFIGURATION> expression improves over \${CTEST_CONFIGURATION_TYPE}
because the latter is not normalized for case-sensitive filesystems.
Move property generation from GenerateScriptConfigs to separate copies
in GenerateOldStyle and GenerateScriptForConfig. This causes the
per-config tests generated for the add_test(NAME) signature to each get
their own test properties. This will allow us to later change the
property values based on the test configuration.
While at it, generate lower-case CMake code (e.g. set_tests_properties).
Inspired-by: Ben Boeckel <mathstuf@gmail.com>
State explicitly that the dependencies will build before the target.
Drop wording that may imply the opposite.
Suggested-by: Rob Stewart <robert.stewart@sig.com>
Teach cmListFileLexerDestroy to call cmListFileLexerSetToken with a NULL
token to free the token string buffer. Without this, if an error occurs
before the token cleanup happens when EOF is reached, then the token
string buffer may leak.
Only one argument is required. Also avoid using the same variable name twice in
the input list and follow the convention used elsewhere for optional arguments.
Similar incomplete generator expressions are already tested
in the GeneratorExpression unit test, but those are executed
with add_custom_target. The generator expressions in the include
directories are run through the preprocessor, whereas the ones
run through add_custom_target are not.
The version of Intel Fortran that actually uses 9.10 as a project format
is very old. Default to the latest format version (11.0) and use the
older format only when known to be necessary.
Suggested-by: Dick Munroe <munroe@csworks.com>
We populate and maintain a vector of structs to keep track of
backtraces already, so no need to populate the Properties container
additionally.
For completeness, it is necessary to remove the condition for
populating the vector for only valid library names and generator
expressions. That condition is now determined when evaluating the
generator expressions.
Since commit ad502502 (cmMakefile: Track configured files so we can
regenerate them, 2013-06-18) cmMakefile::ConfigureFile records the
configured file as an output file generated by CMake. The intention is
that for make and ninja we can re-run CMake when one of the files it
generates goes missing. However, files configured temporarily in
CMakeTmp directories by Check* modules do not live past the CMake
invocation.
We have to also track input files to the configure command. In theory
the input to a configure command could it self be a file that is going
to be deleted later (output from a custom command or configure_file).
The feature needs access to all link libraries. In the future that
will only be possible to calculate at generate-time.
Even when the files were generated at configure time, they were
generated after user code in CMakeLists files were generated. No
policy is needed to handle manipulation of the files from CMake
code, because that was never possible.
Since commit ad502502 (cmMakefile: Track configured files so we can
regenerate them, 2013-06-18) cmMakefile::ConfigureFile records the
configured file as an output file generated by CMake. The intention is
that for make and ninja we can re-run CMake when one of the files it
generates goes missing. However, files configured temporarily in
CMakeTmp directories by Check* modules do not live past the CMake
invocation.
Teach cmMakefile::FinalPass to stop tracking files that don't
exist after we are finished generation.
When CMAKE_SUPPRESS_REGENERATION tells us not to create the ZERO_CHECK
target we should not add dependencies on it from other targets either.
Reviewed-by: Mateusz Loskot <mateusz@loskot.net>
This is necessary because custom commands and targets may create
custom files whose names are determined by generator expressions.
For example, clang should be using $<TARGET_FILE> and $<TARGET_FILE_DIR>
instead of reverse engineering the output file name:
http://thread.gmane.org/gmane.comp.compilers.clang.scm/80523
However, that can only be done when ADDITIONAL_MAKE_CLEAN_FILES
also accepts and evaluates generator expressions.
Similarly, KDE uses the LOCATION property where $<TARGET_FILE>
would also be better in KDE4_HANDLE_RPATH_FOR_EXECUTABLE but
also appends the result to ADDITIONAL_MAKE_CLEAN_FILES.
After this patch, both can be ported to generator expressions.
Commit 10a069b5 (Genex: Fix $<CONFIG> with IMPORTED targets and
multiple locations., 2013-07-15) changed the logic here to include
handling of the MAP_IMPORTED_CONFIG_<CONFIG> target property, but
it was buggy in several ways.
Uppercase the configs in all cases, and compare the mapped configs
with the parameter to the CONFIG genex, instead of with the key of
the mapping.
Ensure CMAKE_DATA_DIR, CMAKE_DOC_DIR, and CMAKE_MAN_DIR are always
relative paths in CMake code, and set defaults accordingly. Use the
install() command instead of install_files() and install_targets().
This is more modern and also avoids stripping of the first character
from user-specified destinations.
While at it, fix the default destinations reported in the bootstrap
help.
The MSBuild version for each Visual Studio generator isn't 4.0. With
Visual Studo 2013 the ToolsVersion moved from being tied to the .NET
framework and now has its own version number.
Exclude Ninja and Xcode from the CMP0021 test
They do not behave the same as the makefile generator with
relative paths.
Don't overwrite the header file for in-source builds.
The commits 9db31162 (Remove CMake-language block-end command
arguments, 2012-08-13) and 77543bde (Convert CMake-language
commands to lower case, 2012-08-13) changed most cmake code
to use lowercase commands and no parameters in termination
commands. However, those changes excluded cmake code generated
in c++ by cmake.
Make a similar style change to code generated by cmake.
With this, projects can enable MACOSX_RPATH by default, but still have
a way to install libraries with no install name dirs into locations
such as /usr/local/lib by setting INSTALL_NAME_DIR="".
Convert the incoming value to a path in the same way that the
already-cached value was converted before comparison.
Do the actual comparison only one time, after both values are
normalized.
Since commit 58e52416 (Warn about arguments not separated by whitespace,
2013-02-16) we warn about arguments not separated by spaces. Loosen the
warning to not complain about left parens not separated by spaces from
the preceding token. This is common in code like "if(NOT(X))".
Teach the RunCMake.Syntax test to cover cases of left parens not
separated by spaces and check that no warning appears.
Fixes this warning from g++ 4.8:
CMake/Source/cmDocumentation.cxx:835:23: warning: typedef 'sdoc_t' locally defined but not used [-Wunused-local-typedefs]
SDOC_UNKNOWN} sdoc_t;
^
The extendResult method expects a non-empty parameters vector, as
assured by the normal case. Avoid calling the method when the parser
finds an incomplete generator expression, but has already entered
the state of expecting to find parameters.
b93982f Merge branch 'dev/fix-variable-watch-crash' into cmake-syntax
c50f7ed cmListFileLexer: Modify flex output to avoid Borland warning
bf73264 Warn about unquoted arguments that look like long brackets
58e5241 Warn about arguments not separated by whitespace
e75b69f cmListFileCache: Convert CMake language parser to class
e945949 Add RunCMake.Syntax test cases for command invocation styles
0546484 cmListFileArgument: Generalize 'Quoted' bool to 'Delimeter' enum
28685ad cmListFileLexer: Split normal and legacy unquoted arguments
1eafa3e cmListFileLexer: Fix line number after backslash in string
f3155cd Add RunCMake.Syntax test to cover argument parsing
6aa0c21 variable_watch: Add test for watching a variable multiple times
b86e37c variable_watch: Check newValue for NULL
f9bb20f variable_watch: Don't share memory for callbacks
05dad99 variable_watch: Fix a typo in the error message
00ce12a variable_watch: Prevent making extra entries in the watch map
34b397e variable_watch: Allow specifying the data to match in RemoveWatch
e43e207 variable_watch: Match client_data when finding duplicates
0d6acb1 variable_watch: Add a deleter for the client data
fc7c3b4 variable_watch: Store client data as pointers
The command itself is owned by the cmMakefile class, but the
cmVariableWatch which holds a pointer to the cmVariableWatchCommand via
the client_data for the callback outlives the cmMakefile class in the Qt
GUI. This means that when the cmMakefile is destroyed, the variable
watch is still in effect, but with a stale pointer.
To fix this, each callback is now a separate entity completely and
doesn't rely on the command which spawned it at all.
An example CMakeLists.txt which demonstrates the issue (only displayed
in cmake-gui, so no tests can be written for it):
set(var 0)
variable_watch(var)
When removing a watch on a variable, using the operator [] on the
internal map will create an empty watch if the variable doesn't have any
existing watches. Rather than creating this empty structure in the map,
return if there isn't a watch on the variable already.
If a callback has the same data as another call, we don't want to delete
the old callback. This is because if the client_data is the same, it
might get deleted causing the new client_data to be bogus. Now, AddWatch
will return true if it will use the watch, false otherwise. Callers
should check the return value to know whether client_data was adopted by
the watch or not.
The client data is arbitrary and the callback may be called an
unspecified number of times, so the cmVariableWatch must be the one to
delete the client data in the end (if it is needed at all).
In the future CMake will introduce Lua-style long bracket syntax.
Warn about unquoted arguments that in the future will be treated
as opening long brackets.
Teach the RunCMake.Syntax test to cover such cases and ensure that the
warning appears.
Teach the lexer to return tokens for whitespace. Teach the parser to
tolerate the space tokens where whitespace is allowed. Also teach the
parser to diagnose and warn about cases of quoted arguments followed
immediately by another argument. This was accidentally allowed
previously, so we only warn.
Update the RunCMake.Syntax test case StringNoSpace expected stderr to
include the warnings.
Replace the boolean value that indicates whether an argument is unquoted
or quoted with a generalized enumeration of possible argument types.
For now "Quoted" and "Unquoted" remain the only types.
If a line inside a string ends in a backslash count the following
newline character as a line increment. Add a test covering this case to
verify that subsequent line numbers are correct.
The output file used for memory checker runs must be unique for every test run
in parallel, so simply make them unique for every test run. Simply use the test
index to avoid collisions.
Some generated cm*Lexer.h headers define preprocessor macros normally
provided by <stdint.h>. The latter is included indrectly by cmMakefile.h
since commit 2268c41a (Optimize custom command full-path dependency
lookup, 2013-08-06). Adjust the order to avoid redefinition warnings.
c90151b VS: Unify how the name of the generator is specified
3873d29 Fix detection of WinCE SDKs with 64bit verion of CMake
40a4302 VS12: Remove duplicated overload of UseFolderProperty()
b02f09d VS: Replace ArchitectureId with PlatformName
4b15dc8 VS: Set CMAKE_VS_PLATFORM_NAME for VS7 and VS71 too
60e568c VS10: Do not set the TargetMachine when detecting the compiler
dfbfe6f VS6: Hardcode id_machine_6 for compiler detection
In the common case of custom command dependencies specified via full
path optimize the implementation of GetSourceFileWithOutput using a
(hash) map. This is significantly faster than the existing linear
search. In the non-full-path case fall back to the existing linear
suffix search.
Since we do not need the information about the target architecture
we can use the PlatformName only to specify the this information.
This also removes setting of the MSVC_*_ARCHITECTURE_ID variable
which is not required, because this variable gets set by the
compiler detection code in CMAKE_DETERMINE_COMPILER_ID_CHECK().
* The ALIAS name must match a validity regex.
* Executables and libraries may be aliased.
* An ALIAS acts immutable. It can not be used as the lhs
of target_link_libraries or other commands.
* An ALIAS can be used with add_custom_command, add_custom_target,
and add_test in the same way regular targets can.
* The target of an ALIAS can be retrieved with the ALIASED_TARGET
target property.
* An ALIAS does not appear in the generated buildsystem. It
is kept separate from cmMakefile::Targets for that reason.
* A target may have multiple aliases.
* An ALIAS target may not itself have an alias.
* An IMPORTED target may not have an alias.
* An ALIAS may not be exported or imported.
Fix generation of the AdditionalIncludeDirectories element content to
escape for XML syntax. We already escape content of other elements,
this one was simply missing by accident.
Use the WIN32_EXECUTABLE target property only to set the SubSystem build
attribute default. When user-specified flags are later parsed they may
then override it.
33e6e0b VS6: Add handling of CMAKE_*_LINKER_FLAGS_<CONFIG> variables
152dfda Add additonal tests for the linker flags
20ed496 Add documentation for the missing CMAKE_*_LINKER_FLAGS_* variables
54f7019 Add CMAKE_STATIC_LINKER_FLAGS to CMakeCommonLanguageInclude
2a43c30 Add support for CMAKE_STATIC_LINKER_FLAGS
14bbf83 Unify the way the flags of a static library are read
Add CMAKE_MODULE_LINKER_FLAGS_*, CMAKE_SHARED_LINKER_FLAGS_* and
CMAKE_STATIC_LINKER_FLAGS_* to cmDocumentVariables.cxx with a
similar documentation as CMAKE_EXE_LINKER_FLAGS_*.
Since commit ad502502 (cmMakefile: Track configured files so we can
regenerate them, 2013-06-18) cmMakefile::ConfigureFile records the
configured file as an output file generated by CMake. The intention is
that for make and ninja we can re-run CMake when one of the files it
generates goes missing. However, files configured temporarily in
CMakeTmp directories by Check* modules do not live past the CMake
invocation.
Teach cmMakefile::ConfigureFile to skip tracking files with "CMakeTmp"
in their path, just like cmCoreTryCompile::TryCompileCode does to
avoid adding dependencies on temporary source files. In the future
we will need a more general filter to avoid recording as CMake
outputs any files that do not exist at the end of generation.
The new feature of install(TARGETS ... INCLUDES DESTINATION) introduced
in commit 650e61f8 (Add a convenient way to add the includes install
dir to the INTERFACE., 2013-01-05) introduced this crash. If the
new feature is used with a target which has no
INTERFACE_INCLUDE_DIRECTORIES, a segfault occurred.
Commit 650e61f8 (Add a convenient way to add the includes install
dir to the INTERFACE., 2013-01-05) introduced an error case for
using the install(TARGETS) command with specified INCLUDES DESTINATION,
but no specified EXPORT set.
It is convenient to use a variable to set the various destinations
for different outputs (as KDE does), and some targets such as
executables are installed but not exported. This was triggering
the error case, but as it is a common case, remove the error.
Pass the original file handles to the native tool when using the
--use-stderr option in the build command. This enables the
usage of advanced terminal features like colored output.
This reverts commit 6187876dea.
It was actually possible before to have paths with spaces in them, the spaces
just need to be quoted. This way spaces will work as argument separators.
Ninja relies on the generator to produce paths that match up with the
paths used in the build.ninja file, which are spelled with backslashes.
Therefore, cmcldeps should canonicalize depfile paths to use backslashes
and relativize paths to the build directory.
GCC warns:
dereferencing type-punned pointer will break strict-aliasing rules [-Wstrict-aliasing]
on constructs like
*(sha_word64*)&var =
so use memcpy to perform such assignments instead.
First, it prevents a NULL dereference and second it reiterates that
targets without languages are not supported by CMake.
Add a RunCMake.ExportWithoutLanguage test exporting a library without a
languages.
Add a new signature to help populate INTERFACE_LINK_LIBRARIES and
LINK_LIBRARIES cleanly in a single call. Add policy CMP0023 to control
whether the keyword signatures can be mixed with uses of the plain
signatures on the same target.
Export the INCLUDES DESTINATION without appending to the
INTERFACE_INCLUDE_DIRECTORIES of the target itself. That way, a target
can be exported multiple times with different INCLUDES DESTINATION
without unintended cross-pollution of export sets.
It accepted an optional argument to test for equality, but no way
to get the linker language of a particular target.
TARGET_PROPERTY provides this flexibility and STREQUAL provides
the necessary API for equality test.
Extend the CompileDefinitions test to cover accessing the
property of another target.
We already document the variables CMAKE_<LANG>_FLAGS_{DEBUG, MINSIZEREL,
RELEASE, RELWITHDEBINFO}. However, CMAKE_<LANG>_FLAGS is not documented,
even though it's available (and useful).
On windows we had a subset of the paths as unix style and a subset as windows
so when doing the set intersection it resulted in the same file being
found twice.
bf23891 CPackWIX: Add support for custom WiX templates
155bb01 CMakeCPack: Provide an upgrade guid for WiX
bfa2e29 CPackWIX: Add option to specify the language(s) of the installer
6e51ea9 CPackWIX: Handle multiple shortcuts in the start menu
6d77e1a CPackWIX: Fix MSI package layout regression from parent
8c0e325 CPackWIX: Handle CPACK_PACKAGE_EXECUTABLES (#13967)
Fix a regression created by commit 373faae5 (Refactor how bundles and
frameworks are supported, 2013-05-05).
Since the ninja file isn't aware of how framework symlinks work, we
suppress symlink creation and let cmOSXBundleGenerator handle it. Also,
use the real name of framework library in build rules as was done
before, instead of the symlink.
This patch adds a comment above the block which protects
the exported targets file against multiple inclusion, to make
the file easier to understand for readers.
Alex
WiX provides a lot of functionality for installers that cannot be
supported (easily) in the default WIX.template.in file.
For most users, the default template should be fine. However if users
want to produce merge modules, include custom actions, etc, this new
option allows for a hook into how the wxs is produced.
Add an assignment operator to cmCustomCommand to copy the Backtrace
member pointee and avoid multiple-free on destruction.
Reported-by: Vitezslav Cizek <vcizek@suse.cz>
9cf3547 Add the INTERFACE_SYSTEM_INCLUDE_DIRECTORIES target property.
1925cff Add a SYSTEM parameter to target_include_directories (#14180)
286f227 Extend the cmTargetPropCommandBase interface property handling.
83498d4 Store system include directories in the cmTarget.
f1fcbe3 Add Target API to determine if an include is a system include.
2679a34 Remove unused variable.
The VS IDE sets the environment variable VS_UNICODE_OUTPUT when
executing build rules in order to tell MS tools to report output through
a back door instead of through stdout/stderr. Unset this variable so
that CMake can capture or properly redirect all output from processes it
runs even when running inside a VS IDE build environment.
This generalizes the special cases fixed by commit 80d045b0 (When
GetPrerequisites.cmake runs dumpbin while running inside the VS IDE...,
2008-05-01) and commit 44aff73d (ExternalProject: Avoid bleed-through
output when logging, 2011-01-06), so drop special handling of
VS_UNICODE_OUTPUT in those instances.
Unlike other target properties, this does not have a corresponding
non-INTERFACE variant.
This allows propagation of system attribute on include directories
from link dependents.
Drop the "vsProjectFile" argument from cmTarget::TraceDependencies. It
appears to be the modern equivalent to a hunk added in commit ba68f771
(...added new custom command support, 2003-06-03):
+ name = libName;
+ name += ".dsp.cmake";
+ srcFilesToProcess.push(name);
but was broken by refactoring at some point. The current behavior tries
to trace dependencies on a source file named the same as a target, which
makes no sense. Furthermore, in code of the form
add_executable(foo foo.c)
add_custom_command(OUTPUT "${somewhere}/foo" ... DEPENDS foo)
the "vsProjectFile" value "foo" matches source "${somewhere}/foo.rule"
generated to hold the custom command and causes the command to be added
to the "foo" target incorrectly.
Simply drop the incorrect source file trace and supporting logic.
Return early in cmake::ReportUndefinedPropertyAccesses if there is no
global generator instead of opening a file and leaking the descriptor.
Reported-by: Ömer Fadıl USTA <omerusta@gmail.com>
The return statement uses d1, d2, d3, and d4 variables but the code
which initialize them inside a if statement and not always this if
statement is corrent. On the other hand these variables are using for
return statement and needed to be initialized. A trivial fix to pervent
some compilers will give build error.
Reviewed-by: Igor Murzov <e-mail@date.by>
d7dd010 Add target property debugging for COMPILE_DEFINITIONS
1841215 Refactor cmTarget::GetCompileDefinitions to use an out-vector, not a string.
afc9243 Add an overload of cmIDEOptions::AddDefines taking a vector of strings.
d95651e Overload cmLocalGenerator::AppendDefines to add a list.
3e30d9e TLL: Don't populate old link interface if CMP0022 is NEW.
574fec9 Export: Generate INTERFACE_LINK_LIBRARIES property on targets.
d0a76ea Introduce the INTERFACE_LINK_LIBRARIES property.
ddde61c Introduce the LINK_ONLY generator expression.
5aa9731 GenexEval: Add abstracted access to link interface for a target.
When the COPY_FILE operation fails optionally capture the error message
with a COPY_FILE_ERROR option instead of reporting the error
immediately. This gives callers a chance to do something else or report
the error.
Teach the RunCMake.try_compile test to cover bad argument combinations
involving COPY_FILE_ERROR. Teach the TryCompile test to cover the case
of a COPY_FILE error message captured by COPY_FILE_ERROR.
If CMAKE_<lang>_FLAGS contains quotes or other CMake language characters
they must be escaped when written into the generated CMakeLists.txt file
so that the test project parses them properly.
Teach the TryCompile test to cover this case by adding a flag with
quotes into CMAKE_C_FLAGS during a C language try_compile.
Use constructs similar to those for COMPILE_OPTIONS. This is a little
different because there is a command to remove_definitions(), so
we can't populate the equivalent target property until generate-time
in cmGlobalGenerator.
Use preprocessor loops and add a unit test for the appropriate
policies. All policies whose value is recorded at target creation
time should be part of this list.
When CMake reports failure to configure a project, especially when the
toolchain does not initialize properly, the true reason may be clear
from reading the CMakeFiles/CMake(Output|Error).log files. Advise users
to look at these files if they exist when configuration fails.
Add RunCMake.Configure test to check that the log files are mentioned
when configuration fails.
We have two mappings for the "/MAP" flag. The first does not care
whether there is a value and activates the GenerateMapFile boolean
setting. The second takes a value and puts it in the MapFileName
setting. The latter must treat the ":" as part of the flag.
This is similar to commit 8ae66bf4 (Fix optionally-valued booleans in VS
10 flag table, 2009-10-23).
The wording "Commands in the file are processed immediately as if they
were written in place of the include command" sounds as if some kind of
macro replacement is performed. This is not accurate. Update the
wording to describe behavior of the included code in terms of the
variable access scope.
Always populate the INTERFACE_LINK_LIBRARIES for interface
entries. Don't populate the old interface properties
matching (IMPORTED_)?LINK_INTERFACE_LIBRARIES(_<CONFIG>)?
if CMP0022 is NEW.
Because the INTERFACE_LINK_LIBRARIES property is now populated by
the target_link_libraries when operating on a static library,
make an equivalent change which populates the property with
the same value when the old link_libraries() command is used. This
silences the policy warning in that case.
This property is generated only for targets which have recorded
policy CMP0022 as NEW, and a compatibility mode is added to
additionally export the old interfaces in that case too.
If the old interfaces are not exported, the generated export files
require CMake 2.8.12. Because the unit tests use a version which
is not yet called 2.8.12, temporarily require a lower version.
This property replaces the properties which
match (IMPORTED_)?LINK_INTERFACE_LIBRARIES(_<CONFIG>)?, and is enabled
for IMPORTED targets, and for non-IMPORTED targets only with a policy.
For static libraries, the INTERFACE_LINK_LIBRARIES property is
also used as the source of transitive usage requirements content.
Static libraries still require users to link to all entries in
their LINK_LIBRARIES, but usage requirements such as INCLUDE_DIRECTORIES
COMPILE_DEFINITIONS and COMPILE_OPTIONS can be restricted to only
certain interface libraries.
Because the INTERFACE_LINK_LIBRARIES property is populated unconditionally,
we need to compare the evaluated result of it with the link implementation
to determine whether to issue the policy warning for static libraries. For
shared libraries, the policy warning is issued if the contents of
the INTERFACE_LINK_LIBRARIES property differs from the contents of the
relevant config-specific old LINK_INTERFACE_LIBRARIES property.
CMake requires the top-level CMakeLists.txt to contain a direct call to
the project() command and will insert one if there is not. Document
this requirement since some authors have tried to use include() to load
a file calling the project command.
This was missing from commit 30962029 (Make targets depend on the
link interface of their dependees., 2012-12-26), which caused
only immeditate entries of the link interface to become target
depends.
Entries from the cmMakefile are processed and maintained similarly
to other include directories. The include_directories(SYSTEM)
signature affects all following targets, and all prior targets
in the same makefile.
Add to the brief documentation of the Visual Studio 10, 11, and 12
generators the corresponding VS product year. Clarify that VS11 is for
Visual Studio 2012, and VS12 is for Visual Studio 2013.
9a76d83 VS12: Find proper MSBuild for VSProjectInSubdir test
4e5cb39 Merge branch 'master' into vs12-generator
78fdbbc FindBoost: Add -vc120 mangling for VS 12
e99d7b1 VS12: Generate flag tables from MSBuild v120 tool files
77ac9b8 VS12: Add Visual Studio 12 generator (#14251)
539356f Ninja: Custom Command file depends don't need to exist before building
874e171 Ninja: GlobalNinjaGenerator WriteBuild and WritePhonyBuild non static
88d27ad Add a test to expose a bug with add_custom_command and ninja.
When converting custom commands for the ninja build system we
need to make sure that any file dependencies that exist in the build
tree are converted to phony targets. This tells ninja that these
files might not exist when starting the build, but could be generated
during the build.
This is done by tracking all dependencies for custom command targets.
After all have been written out we remove all items from the set
that have been seen as a target, custom command output, an alias,
or a file in the source directory. Anything that is left is considered
to be a file that will be generated as a side effect of another
custom command.
To properly track the usage of dependencies that are generated at
compile time as the side effect of other build steps we need
to make the WriteBuild and WritePhonyBuild commands non static
Run cmparseMSBuildXML.py on cl.xml, lib.xml, and link.xml to generate
our flag tables:
python cmparseMSBuildXML.py -x ".../MSBuild/Microsoft.Cpp/v4.0/v120/1033/cl.xml" > cmVS12CLFlagTable.h
python cmparseMSBuildXML.py -x ".../MSBuild/Microsoft.Cpp/v4.0/v120/1033/lib.xml" > cmVS12LibFlagTable.h
python cmparseMSBuildXML.py -x ".../MSBuild/Microsoft.Cpp/v4.0/v120/1033/link.xml" > cmVS12LinkFlagTable.h
Fix up the declaration names at the top of each file. Finally, teach
cmVisualStudio10TargetGenerator to select the version of the table
matching the version of VS.
Copy cmGlobalVisualStudio11Generator to cmGlobalVisualStudio12Generator
and update version numbers accordingly. Add the VS12 enumeration value.
Add module CMakeVS12FindMake to find MSBuild. Look for MSBuild in its
now-dedicated Windows Registry entry. Teach the platform module
Windows-MSVC to set MSVC12 and document the variable. Teach module
InstallRequiredSystemLibraries to look for the VS 12 runtime libraries.
Teach tests CheckCompilerRelatedVariables, Preprocess, VSExternalInclude,
and RunCMake.GeneratorToolset to treat VS 12 as they do VS 10 and 11.
Inspired-by: Minmin Gong <minmin.gong@gmail.com>
In each .l and .y input file that has instructions for manual
transformation of the output to include a step to remove the 'register'
storage specifier.
This has been requested, along with a patch, by Shaun Williams
in http://public.kitware.com/Bug/view.php?id=13788 .
It adds a global property AUTOMOC_TARGETS_FOLDER, which can
be used to group the automoc targets together in a folder e.g.
in Visual Studio.
Alex
In my project group we are using CMake to generate c++/cli winform
projects and I noticed the work done in commit 79ec7868 (VS: Add Windows
Forms Support, 2013-04-29) was in the right direction for solving some
of the problems we were facing.
The changes as submitted was breaking some functionality in our
projects, so I made some changes that fixes our problems and I believe
that it will also work for others.
* Resx files did not link correctly with the winform h-file so I added
the Resx configuration to the vcxproj file.
* I removed the functionality for setting <CLRSupport> true for the
project based on if an resx-file is pressent. This is preventing
us from using native cpp code. Also this do not address that some
projects will need to set other options like clr:pure, clr:safe.
This could be implemented as a cmake option, so it is possible to
specify exactly what is needed. Existing VSWindowsFormsResx Test
project is updated so it will be working with my changes.
d221eac Refactor target COMPILE_OPTIONS and COMPILE_FLAGS handling
b6385ca Escape target flags taken from COMPILE_OPTIONS
0c9cc9a Embarcadero: Use response files only for includes, objects, and libs
Replace the cmLocalGenerator GetCompileOptions method with an
AddCompileOptions method since all call sites of the former simply
append the result to a flags string anyway.
Add a "lang" argument to AddCompileOptions and move the
CMAKE_<LANG>_FLAGS_REGEX filter into it. Move the call sites in each
generator to a location that has both the language and configuration
available. In the Makefile generator this also moves the flags from
build.make to flags.make where they belong.
Factor appending of individual flags out into an AppendFlagEscape method
in cmLocalGenerator and teach it to use EscapeForShell. Update all
COMPILE_OPTIONS handling to use AppendFlagEscape.
Override the method in the Xcode generator to use its custom escape
implementation.
Teach the CompileOptions test to add an option that requires escaping
everywhere instead of just with the GNU tools.
While calculating dependencies collapse sequences such as
../../../a/b/c/../../d/e/../../e/f
to avoid total path lengths over the Windows path length limit as much
as possible.
ff015ee Genex: Report error if a target file is needed to evaluate link libraries.
b58aff9 Genex: Extend EvaluatingLinkLibraries to also check the top target name.
b1c19ce Genex: Make LINK_LANGUAGE report an error when evaluating link libraries.
0e1cb07 Add missing return after error report.
Currently when a configured file is removed from the build directory,
running the build command will not regenerate the file. Now detect
this and will rerun cmake properly when a user issues the build
command.
AddCMakeDependFile and AddCMakeOutputFile both store as std::string
and all calling sites use std::string. So instead of creating more
temporary objects, lets just use std::strings.
Through use of libarchive internally we support .zip files as well as
.tar format. The ExternalProject module makes use of this feature.
Document support officially.
Expose the internal system information API to the CMake language. For
example, it is useful to see how much memory the system has available to
estimate an upper limit of tests that can run in parallel.
Each call to AddDefinition has overhead for variable watches and such.
Avoid extra calls when not needed.
This decreases the configure time for ParaView by 10 seconds on my
machine. Without the change about 1,000,000 set-to-empty calls were
being made. After the change it drops to about 100,000.
The SHA512_Update implementation accesses input data via 64-bit
integers. This requires alignment of the input buffer on some
architectures. Align our stack-allocated buffer for file content to
satisfy this requirement.
Describe explicitly the scope in which enable_language must be
invoked to handle all direct and indirect uses of a language.
While at it, re-word documentation of the OPTIONAL keyword to
avoid confusion over its partial implementation.
For clang, this allows passing -target <triple> to the compiler, and
for qcc, -V<arch> using toolchain files containing something like
set(triple arm-linux-gnueabihf)
set(CMAKE_C_COMPILER "/usr/bin/clang")
set(CMAKE_C_COMPILER_TARGET ${triple})
set(CMAKE_CXX_COMPILER "/usr/bin/clang++")
set(CMAKE_CXX_COMPILER_TARGET ${triple})
or
set(arch gcc_ntoarmv7le)
set(CMAKE_C_COMPILER /opt/qnx650/host/linux/x86/usr/bin/qcc)
set(CMAKE_C_COMPILER_TARGET ${arch})
set(CMAKE_CXX_COMPILER /opt/qnx650/host/linux/x86/usr/bin/QCC)
set(CMAKE_CXX_COMPILER_TARGET ${arch})
Both clang and qcc are inherently cross compiler( driver)s.
Commit 089fe1c1 (Optimize genex evaluation for includes and
defines., 2013-02-01) introduced an optimization on DAG processing
to not reprocess properties on targets which have already been seen.
This was refactored slightly in commit 8dfdf1c7 (Fix the tests for
evaluating includes and defines., 2013-02-18), but was not extended
to cover COMPILE_OPTIONS in commit 80ca9c4b (Add COMPILE_OPTIONS target
property., 2013-05-16).
This omission causes the same performance regression in running
cmake on LLVM which 089fe1c1 fixed before, but this time for the
transitive evaluation of the COMPILE_OPTIONS property.
As CMAKE_ROOT_FIND_PATH can be a list, a new CMAKE_SYSROOT is
introduced, which is never a list.
The contents of this variable is passed to supporting compilers
as --sysroot. It is also accounted for when processing implicit
link directories reported by the compiler, and when generating
RPATH information.
Extend the signature
try_compile(RESULT_VAR <bindir> <srcfile> ...)
to allow multiple sources as
try_compile(RESULT_VAR <bindir> SOURCES <srcfile>... ...)
Process the sources to generate a CMakeLists.txt that enables all needed
languages.
Teach the TryCompile test to try cases with two sources of the same
language and of mixed languages. Teach RunCMake.try_compile to cover
error cases for the signature.
If the expression $<TARGET_PROPERTY:prop> appears in the content
of a target property, the target that prop is read from is
the 'head target' of the expression. In contexts such as evaluating
the content of a target property during generation, such
as INCLUDE_DIRECTORIES, the 'head target' is the one on which the
initial request was made.
If evaluating a generator expression which is not a target property
content, the target must be explicitly specified. Such contexts
include add_custom_command and file(GENERATE). The content might
then look like
$<TARGET_PROPERTY:tgt,prop>
However, as there is no HeadTarget set, any generator expressions
evaluated as part of reading prop from tgt which do not specify
the tgt directly report an error.
Modify the logic of the TARGET_PROPERTY generator expression so
that in such contexts, the 'head target' is set to the appropriate
target which was first encountered.
In commit 2bc22bda (Xcode: Add frameworks search paths from link
dependeny closure, 2012-12-07) we made framework search paths from the
link closure conditional on target type, skipping it on STATIC and
OBJECT library targets that do not actually link. However, the
framework search paths also influence the compile lines (-F options) so
we need them for all target types. The Makefile generator already does
this, as did the Xcode generator prior to the above-mentioned commit.
Fix the wording of the documentation for CMAKE_PARENT_LIST_FILE to
clarify that it only applies to the include stack in the current
directory. Specify exactly what commands can include files instead of
saying "somehow invoke".
It is common to specify a CMAKE_TOOLCHAIN_FILE and get a warning
for using it despite it not being used.
The WarnUnusedCliUnused test relies on the warning being emitted
each time cmake is run on an existing build. That behavior is changed
by this patch to warn only on the first invokation of CMake, and not
on subsequent invokations (because the variable is in the cache with
the same value). For that test, a clean target is added which clears
the cache and cause the warning to be emitted each time.
As the Ninja generator does not support the feature needed to test
this, it is not tested with that generator.
This command is similar to add_definitions, in that it affects
the compile options of all targets which follow it. The implementation
is similar to the implementation of the include_directories command,
in that it is based on populating a COMPILE_OPTIONS directory property
and using that to initialize the same property on targets.
Unlike the include_directories command however, the add_compile_options
command does not affect previously defined targets. That is, in
the following code, foo will not be compiled with -Wall, but bar
will be:
add_library(foo ...)
add_compile_options(-Wall)
add_library(bar ...)
Use makefile->IssueMessage() to print the unprocessed watch message in a
format consistent with other CMake messages and with a more complete
call stack for the access.
When a watch does not specify a command to call then variable_watch
prints out a message to stderr. Remove code after that which collects
all variable values to construct a message that is never printed.
Otherwise such code causes a READ_ACCESS watch to trigger on all
variables in the currents scope.
Reported-by: Yichao Yu <yyc1992@gmail.com>
In commit 9a5b4eba (All variable accesses should produce watch
callbacks, 2007-05-17) we added a new enumeration value but did not
update the list of strings matching them. Add the missing entry.
Without this, variable_watch prints REMOVED_ACCESS instead of
MODIFIED_ACCESS when set the value of the variable.
dc1d025 OS X: Add test for rpaths on Mac.
8576b3f OS X: Add support for @rpath in export files.
00d71bd Xcode: Add rpath support in Xcode generator.
94e7fef OS X: Add RPATH support for Mac.
RPATH support is activated on targets that have the MACOSX_RPATH
property turned on.
For install time, it is also useful to set INSTALL_RPATH to help
find dependent libraries with an @rpath in their install name.
Also adding detection of rpath conflicts when using frameworks.
This fixes bug #13797.
The kinds of changes applied in 373faae5 for frameworks are now
applied to CFBundle. The prefix and suffix for CFBundles are
now handled in cmTarget::GetFullNameInternal.
This corresponds to the g++ and clang++
option -fvisibility-inlines-hidden on linux. On Windows with MinGW,
this corresponds to -fno-keep-inline-dllexport. That option is
not supported by clang currently.
This is initialized by CMAKE_<LANG>_VISIBILITY_PRESET. The target
property is used as the operand to the -fvisibility= compile option
with GNU compilers and clang.
Currently it only adds the contents of the COMPILE_FLAGS target
property, but it can be extended to handle a new COMPILE_OPTIONS
generator expression enabled property.
Process all arguments in a single loop using a simple state machine.
While at it, fix some error message typos. Also allow LINK_LIBRARIES
with no actual libraries to disable use of the -DLINK_LIBRARIES=...
from the CMAKE_FLAGS. This was already possible in the old logic if
LINK_LIBRARIES was immediately followed by another keyword argument
instead of the end of the argument list, so allow it in general.
Update the RunCMake.try_compile test cases accordingly.
3aa9ce4 GenexEval: Fix evaluation of INCLUDE_DIRECTORIES target property.
0b39fef GenexEval: Extract a getLinkedTargetsContent from TargetPropertyNode.
53164ac cmTarget: Remove some hardcoding of transitive property names.
This property should come from the content of the property itself,
plus the INTERFACE_INCLUDE_DIRECTORIES of the link *implementation*.
In contrast, when the INTERFACE_INCLUDE_DIRECTORIES is evaluated for
a target, the INTERFACE_INCLUDE_DIRECTORIES of the link *interface*
is used.
Similar logic applies for the COMPILE_DEFINITIONS target properties.
If the propertyName is already an INTERFACE_ variant of the property,
ie, the expression is similar to
$<TARGET_PROPERTY:foo,INTERFACE_INCLUDE_DIRECTORIES>
then the INTERFACE_INCLUDE_DIRECTORIES of the link *interface* of foo
is used.
However, if the propertyName is not an INTERFACE_ variant, and the
interfacePropertyName is, ie, the expression is similar to:
$<TARGET_PROPERTY:foo,INCLUDE_DIRECTORIES>
then the INTERFACE_INCLUDE_DIRECTORIES of the link *implementation*
of foo is used.
This will be used to process transitive components of properties
which depend on linked targets. Currently only the link interface
of the target can be used as the source of the linked targets, but
in the next commit it will be possible to use the link implementation
as the source of link targets.
This commit does not change the semantics of the code.
Commit e65ef08b (try_compile: Fix quoting of libraries in generated
CMakeLists.txt, 2013-05-24) added quoting to entries specified in
the LINK_LIBRARIES. However, if the input entries contain whitespace
padding, that quoted whitespace causes an error in the generated
CMakeLists.txt at target_link_libraries.
Strictly, it is an error to have space separated entries in the
CMAKE_REQUIRED_LIBRARIES, as it was never properly handled by
CMakeExpandImportedTargets even prior to commit 236133e7 (Handle
targets in the LINK_LIBRARIES of try_compile., 2013-02-09). However,
it is causing a regression in KDE code which tests the next branch.
In Qt 5.1, Qt5::Core has a INTERFACE_QT_MAJOR_VERSION property
of '5', and since CMake 2.8.11, Qt4::QtCore has an
INTERFACE_QT_MAJOR_VERSION of '4'. This was introduced in
commit 4aa10cd6 (FindQt4: Set the INTERFACE_QT_MAJOR_VERSION for
Qt4::QtCore, 2013-03-16), to produce an error if Qt 4 and Qt 5
are erroneously used by the same target. This can also be used
however to determine the Qt major version, and therefore the
particular moc executable to use during automoc steps. This means
that targets in a single buildsystem can use a selection of Qt 4
and Qt 5, and still take advantage of the CMAKE_AUTOMOC feature
without conflicting.
Since commit 236133e7 (Handle targets in the LINK_LIBRARIES of
try_compile, 2013-02-09) libraries passed to the new LINK_LIBRARIES
option of try_compile are not quoted inside the generated CMakeLists.txt
file. Quote the library names so they re-parse correctly when loaded by
CMake to configure and generate the test project.
Reported-by: Bogdan Cristea <cristeab@gmail.com>
They can't be used when evaluating link libraries, but they can be
used for include directories and compile definitions. Later they can
be used for compile options.
The idea is to write to a temp file which contains generator
expressions, and at generate time, evaluate the generator expressions,
and write the result to a file.
Because executables on Windows are limited in the length of command line
it is possible to use, it is common to write command line arguments to a
file instead and specify the file as a source of arguments.
This new FILE(GENERATE) subcommand allows the use of generator
expressions to create such files so that they can be used with
add_custom_command for example.
Make handling of directory separators consistent between
non-bundle and bundle code.
Remove xcode specific flag from cmTarget when getting install_name.
Add (more) consistent convenience functions in cmTarget to get
directories inside of bundles and frameworks to add files to.
This refactor also fixes bug #12263 where frameworks
had the wrong install name when SKIP_BUILD_RPATH.
Also make install_name for frameworks consistent between Makefile
and Xcode generator.
Since commit c519bb2b (XCode: Also qoute [] as needed to set
build-configurations, 2011-04-05) we escape "[]" conditions for
XCODE_ATTRIBUTE_ settings. However, we need to handle the "variant"
condition with a special case to map it only into the settings for the
matching configuration.
a7ba452 Add the JOIN generator expression.
96ec314 Make it possible for any genex to have arbitrary content at the end.
bd638ee Rename the method determining if a genex accepts arbitrary content.
dc742fe Extract the ProcessArbitraryContent method.
Checking if a byte is 0 before checking it for something else doesn't do
anything useful. Also one can be sure that it can't be anything wanted
if the value was set to 0 immediately before.
Refactor lookup of CMAKE_(EXE|MODULE|SHARED)_LINKER_FLAGS(|_<CONFIG>)
variables to ensure all combinations are handled. Use the helper method
AddConfigVariableFlags to simplify the implementation.
.../Source/cmakewizard.cxx: In member function ‘virtual void cmakewizard::AskUser(const char*, cmCacheManager::CacheIterator&)’:
.../Source/cmakewizard.cxx:31:35: warning: conversion to ‘int’ from ‘long unsigned int’ may alter its value [-Wconversion]
if(!fgets(buffer, sizeof(buffer)-1, stdin))
^
.../Source/cmakewizard.cxx: In member function ‘virtual bool cmakewizard::AskAdvanced()’:
.../Source/cmakewizard.cxx:70:35: warning: conversion to ‘int’ from ‘long unsigned int’ may alter its value [-Wconversion]
if(!fgets(buffer, sizeof(buffer)-1, stdin))
The compiler is (partly) right here: sizeof() returns a size_t, which often is
bigger as as int as it is unsigned long or something similar. Add an explicit
cast to get rid of that warning here, the buffer has a size of 4KiB, so the
value will fit into an int on all sane platforms.
When processing link line entries we check for matches with known naming
patterns for static and shared libraries. Teach this logic to recognize
numerical suffixes after shared library names such as "libfoo.so.1".
Generate the default AssemblerListingLocation through the flag map so
that it can be overridden by a user /Fa flag. Also teach the VS 7-9
generators to map /Fa to AssemblerListingLocation.
While at it, fix the AssemblerListingLocation default value to have a
trailing slash after the configuration name. This ensures it will be
treated as a directory and not a file name.
This allows for example, the buildsystem to use names like 'boost_any'
instead of the overly generic 'any', and still be able to generate
IMPORTED targets called 'boost::any'.