At the top of a build tree we configure inside the CMakeFiles directory
files such as "CMakeSystem.cmake" and "CMake<lang>Compiler.cmake" to
save information detected about the system and compilers in use. The
method of detection and the exact results store varies across CMake
versions as things improve. This leads to problems when loading files
configured by a different version of CMake. Previously we ignored such
existing files only if the major.minor part of the CMake version
component changed, and depended on the CMakeCache.txt to tell us the
last version of CMake that wrote the files. This led to problems if the
user deletes the CMakeCache.txt or we add required information to the
files in a patch-level release of CMake (still a "feature point" release
by modern CMake versioning convention).
Ensure that we always have version-consistent platform information files
by storing them in a subdirectory named with the CMake version. Every
version of CMake will do its own system and compiler identification
checks even when a build tree has already been configured by another
version of CMake. Stored results will not clobber those from other
versions of CMake which may be run again on the same tree in the future.
Loaded results will match what the system and language modules expect.
Rename the undocumented variable CMAKE_PLATFORM_ROOT_BIN to
CMAKE_PLATFORM_INFO_DIR to clarify its purpose. The new variable points
at the version-specific directory while the old variable did not.
When a language is not enabled at the top level of a project but is
enabled in multiple disjoint subdirectories we should re-use the
CMake<lang>Compiler.cmake file from the first directory. Load the file
whenever it exists and is not left from a different version of CMake.
bd34963 Refactor generation of shared library flags
55d7aa4 Add platform variable for flags specific to shared libraries
31d7a0f Add platform variables for position independent code flags
CMAKE_SHARED_LIBRARY_<lang>_FLAGS has flags on various platforms for a
variety of purposes that are correlated with shared libraries but not
exclusive to them. Refactor generation of these flags to use new
purpose-specific platform variables
CMAKE_<lang>_COMPILE_OPTIONS_DLL
CMAKE_<lang>_COMPILE_OPTIONS_PIC
CMAKE_<lang>_COMPILE_OPTIONS_PIE
Activate the DLL flags specifically for shared libraries. Add a new
POSITION_INDEPENDENT_CODE target property to activate PIC/PIE flags, and
default to true for shared libraries to preserve default behavior.
Initialize the new property from CMAKE_POSITION_INDEPENDENT_CODE to
allow easy global configuration in projects.
Although the default behavior is unchanged by this refactoring, the new
approach ignores CMAKE_SHARED_LIBRARY_<lang>_FLAGS completely. We must
leave it set in case projects reference the value. Furthermore, if a
project modifies CMAKE_SHARED_LIBRARY_<lang>_FLAGS it expects the new
value to be used. Add policy CMP0018 to handle compatibility with
projects that modify this platform variable.
Add a PositionIndependentCode test on platforms where we can get
meaningful results.
Add cmGlobalGenerator::GenerateRuleFile to compute a generator-specific
rule file location. This will allow specific generators to override the
location of .rule files without changing the behavior of other
generators.
Rename cmGlobalGenerator::GetCMakeCFG{InitDirectory => IntDir} to
have a shorter name without a typo. Add a 'const' qualifier since
the method is only for lookup and never needs to modify anything.
Add a virtual cmGlobalGenerator::ComputeTargetObjects method invoked
during cmGeneratorTarget construction. Implement it in the Makefile
generator to pre-compute all object file names for each target. Use
the results during generation instead of re-computing it later.
Construct the instances after the final set of targets is known but
before computing inter-target dependencies. This order will allow
initialization of cmGeneratorTarget instances to adjust and finalize
declared inter-target dependencies.
Eliminate callers of cmMakefile::GetIncludeDirectories.
All callers of GetIncludeDirectories should go through the local generator
object.
Only the local generator calls cmTarget::GetIncludeDirectories directly.
Consider the case motivating commit e01cce28 (Allow add_dependencies()
on imported targets, 2010-11-19). An imported target references a file
generated at build time by a custom target on which it depends. Had the
file been built directly using add_library or add_executable its target
name would have been visible globally. Therefore the imported target
representing the file should be globally visible also.
Teach the IMPORTED signature of add_(executable|library) to accept a new
"GLOBAL" option to make the imported target visible globally.
59238dc Fix --find-package mode on Cygwin, where enable_language(RC) is called
98472e4 Require the current cmake version in --find-package mode
a6ccf3c Use $(CXXFLAGS) and $(LDFLAGS) in the --find-package test Makefile
4386918 Fix line length
7d69310 Only enable the test when using GNU make
3011149 Make the test harder by always having a space in the include dirs
ab57ff6 Make the --find-package test harder
626fc71 Much improved test, should now be executed on all UNIXes
ec6982d Disable any STATUS output in --find-package mode
e552ae7 Dont check for -isysroot and -mmacosx-version on OSX in --find-package mode
e589589 Rename helper macros print_compile_flags() to set_compile_flags_var()
aecfc1f Fix test on OpenBSD with BSD make
6bb4ca3 The makefile for the test was kindof wrong
fd15b5e Only run the test if we are using a makefile generator under UNIX
9fc87c6 Add a test for the new --find-package mode
d3ae0ff Improve documentation for --find-package mode
bf07375 Add a cmake.m4 for using cmake in autoconf projects instead of pkgconfig
b0e3578 Use the file-utility to test for 64bit if there is no /usr/lib64
53edfb2 Better support for lib64 and Debian multiarch
b8fdaa1 Fix copyright notice in new CMakeFindPackageMode.cmake
7690edf Replace cmake::GetScriptMode() with GetWorkingMode()
e4f603b Implement find-package mode of cmake
a91d662 Add find-package mode, which does nothing yet
b976e70 Make clLocalGenerator::GetTargetFlags() public
dd2f814 Merge branch 'dev/add_test-working-directory' into dev/strict-mode
949d32c Unwatch manual variables upon removal in cmake-gui
3939032 Unwatch manual variables upon removal in ccmake
8354413 Add method to unwatch a manual variable
8ed3c85 Give a better message for unused variables
729db48 Fix ArgumentExpansion test expected results
89c2544 Checking for a definition is a usage
5625dee Don't output to stderr in the GUI
ad25a96 Merge branch 'ImprovedDotSupport2' into dev/strict-mode
c128abe Merge branch 'AddCMAKE_CURRENT_LIST_DIR' into dev/strict-mode
9bcaff0 Merge branch 'cmake-guiRememberAdvancedCheckbox' into dev/strict-mode
544d0c3 Fix expected output for WarnUninitialized test
4e3bea4 Update expected messages to new format
8e8c9e4 Don't check at destruction for usage
668e005 Use cmake::IssueMessage for warnings
88cd4c1 Use 'CMake Warning' versus 'warning' for CDash
3c3b98d Initialize the class before setting warn flags
cf8b15a Ignore files under the CMakeFiles directory
fd50f06 Don't check for unused vars at configure time
447a04c Don't warn during configure when doing everything
b97ee21 Check for unused variables at the end of generate
c18c977 When checking for variables, specify a reason
3f1121f Use a long int since Line is a long as well
2507f93 Change the failure case string to 'Unexpected'
fe390a2 Add 'ArgumentExpansion' test
8dbb209 Wrong boolean value for CLI warnings
d4ee998 Hard-code the --no-warn-unused-cli flag
a267b99 Fix line lengths
82ed104 Flag that the directories have been set
5aa535b Add argument to arg parsing to not set directories
367e5c3 Revert "Revert "When calling CMake, set the args and the cache""
ab5d4e4 Revert "When calling CMake, set the args and the cache"
9b90040 When calling CMake, set the args and the cache
fe56002 Fix long lines for KWStyle
5d30cfc Set a watch on variables added through the gui
33c63b1 Add a method to put a watch for variables
535253f Initialize the warning variables earlier
cbb286c Fix the path detection to work for top-level
62be1f7 Initialize the usage stack earlier
c6e7fab Factor out the checks for unused variables
5e41ba8 When using the API, check for Add vs. Remove
dee1976 Fix typo in VariableUnusedViaUnset test
f231ce5 Remove old false positive avoidance code
a117e02 Revert "Add test for unused warnings at the end of scope"
2c82f2b Exempt CMAKE(CURRENT|PARENT)_LIST_FILE from usage
6d7d449 Ignore CLI warnings for ABI determination
7740a73 Only return local keys that are defined
bef3aee Use the API so that warnings can be tracked
05cb0f4 Check for unused variables in the dtor
91c4c99 Add test for unused warnings at the end of scope
ca90f67 Fix detection of unused variables when setting
f7438ca Add test for unused detection via setting it
995cfb0 Don't warn if the variable wasn't defined
aefc91d Add test for usage checks via unset
a8e97f8 Remove VarRemoved code since it's been superceded
59463ef Rework CheckVariableForUnused usage
f117423 Fix line lengths to be no more than 78
e49a935 Improve unused warning logic
e01e40c Mark ARGC, ARGV*, and ARGN as used
a17aff7 Ignore CMAKE_MATCH_* variables for usage
02a114d Add method to allow variables to be marked as used
a0b0d23 CMAKE_DO_TRY_COMPILE is no longer used
ae3eff3 Fix the path used for ignoring system warnings
056b441 Fix missing case for usage of a variable
980e048 Factor out checks for unused variables
83acb0a Remove now unused variables
3801463 Use built-ins for readability and maintainability
8b52015 Push the initialize and unused states when copying
439877f Be consistent with single and double quotes
4cf1706 Add documentation for check-system-vars
b74777f Fix the spelling of the flag for warn-unused-vars
b948120 Change logic of flag to turn off cli unused checks
f047a17 Add test for uninitialized variables
75bda38 Add tests for unused command line variables
300fc15 Fix detection of system files
d784e6a Run the unused variables check on the final pass
9efc057 VariableWatch is not available when bootstrapping
2e78224 Add a missing comma to the warning message
7499700 Add a flag to warn about system files
fff9f6d Rename flags again and use variablewatch for cli
786e269 Add warn-unused to the Qt interface
636e6c4 Default to marking things as used
4ff0340 Rename find-unused to warn-unused
d7999e9 Rename strict-mode to warn-uninitialized
e141bc9 Detect unused variables
d3e8eb5 Add flags to detect unused variables
f332e14 Complete strict-mode checks for uninitialized vars
52f9637 Add method to get the local scope variables
f794d58 Make --strict-mode option, and integrate with cmake-gui
48b5b85 Add a warning when variables are used uninitialized.
cd626ea For macros make sure the FilePath points to a valid pointer in the args.
During a try_compile cmGlobalGenerator::EnableLanguage uses results from
the outer project. Reject attempts to enable languages in the test
project that are not "ready" in the outer project. Mark a language as
"ready" when all its information has been loaded and we are ready to
generate build rules.
This also avoids infinite recursion introduced by commit 295b5b60 (Honor
CMAKE_USER_MAKE_RULES_OVERRIDE in try_compile, 2010-06-29) for projects
that set CMAKE_USER_MAKE_RULES_OVERRIDE to a file that uses try_compile.
The file is loaded along with the information for a given langauge so
the language is not yet "ready".
4499d50 Mark CustomCommand test perconfig.out as SYMBOLIC
f0cdb60 Introduce "generator expression" syntax to custom commands (#11209)
4749e4c Record set of targets used in cmGeneratorExpression
ef9e9de Optionally suppress errors in cmGeneratorExpression
45e1953 Factor per-config sample targets out of 'Testing' test
4091bca Factor generator expression docs out of add_test
bfb7288 Record backtrace in cmCustomCommand
Remove a boolean parameter of cmGlobalGenerator::CreateGlobalTarget that
is never set to true anymore. Remove global target "consolidation" loop
because no global targets exist before it runs anymore.
Visual Studio Express editions do not support solution folders,
so default behavior should be as if USE_FOLDERS global property
is OFF.
Also, allow folder names to be the same as target names: internally,
use a prefix to distinguish folder GUIDs from target GUIDs. Add
a target and folder with the same name in the ExternalProject
test to exercise this code.
For CMake itself, provide a new option CMAKE_USE_FOLDERS that
defaults to ON so that Visual Studio users get a nicely organized
CMake project. Express edition users will have to turn off the
CMAKE_USE_FOLDERS option in order to build CMake in the VS Express
IDE.
Since commit bc43b0f2 (Do not link library dependencies in VS solutions,
2009-10-20) CMake disables for VS >= 8 linking of a target to libraries
that happen to be listed as solution-level dependencies. Therefore we
can list the direct dependencies of each target in the solution file and
let VS handle transitive dependencies automatically.
This work was started from a patch by Thomas Schiffer.
Thanks, Thomas!
See the newly added documentation of the FOLDER target
property for details.
Also added global properties, USE_FOLDERS and
PREDEFINED_TARGETS_FOLDER. See new docs here, too.
By default, the FOLDER target property is used to organize
targets into folders in IDEs that have support for such
organization.
This commit adds "solution folder" support to the Visual
Studio generators. Currently works with versions 7 through
10.
Also, use the new FOLDER property in the ExternalProject
test and in the CMake project itself.
a99f620 Fix unused parameter warning in VS 7.1 generator
79a88c3 Refactor VS <= 7.1 utility-depends workaround
325bdb2 Factor out duplicate VS target dependency code
6bea843 Factor out global generator ComputeTargetDepends method
We store custom command rule hashes in CMakeFiles/CMakeRuleHashes.txt
persistently across CMake runs. When the rule hash changes we delete
the custom command output file and write a new hash into the persistence
file.
This functionality was first added by the commit 'Introduce "rule
hashes" to help rebuild files when rules change.' (2008-06-02).
However, the implementation in cmGlobalGenerator::CheckRuleHashes kept
the file open for read when attempting to rewrite a new file. On
Windows filesystems this prevented the new version of the file from
being written! This caused the first set of rule hashes to be used
forever within a build tree, meaning that all custom commands whose
rules changed would be rebuilt every time CMake regenerated the build
tree.
In this commit we address the problem by splitting the read and write
operations into separate methods. This ensures that the input stream is
closed before the output stream opens the file.
CMake has a special case for the "make install" target when building
CMake itself. We use the just-built CMake to install itself since an
existing CMake installation cannot replace itself (at least on Windows).
We simplify the code that computes the location of the CMake binary by
taking advantage of existing generator support for target lookup. This
will make it robust to any changes in CMake's own CMakeLists.txt files
in the future.
In cmGlobalGenerator::GetTargetSets we collect targets from all local
generators in a tree or subtree corresponding to a project() command.
Some targets, such as ALL_BUILD, are duplicated in each subdirectory
with a project() command. For such targets we should keep only the copy
for the top-most (root) local generator.
Previously this filtering was done in each VS IDE generator, but it is
easier to do it in one place when the targets are first encountered.
This also fixes bad ALL_BUILD dependencies generated for VS 7.0 because
the cmGlobalVisualStudio7Generator::WriteTargetDepends method was not
filtering out duplicates. Now we avoid duplicates from the start.
This commit cleans up the declaration, definition, and invocations of
the GetTargetSets method and related code. There is no change in
function except to make the method virtual.
This converts the CMake license to a pure 3-clause OSI-approved BSD
License. We drop the previous license clause requiring modified
versions to be plainly marked. We also update the CMake copyright to
cover the full development time range.
The cmGlobalGenerator::AddTargetDepends method traces the dependencies
of targets recursively to collect the complete set of targets needed for
a given project (for VS .sln files). This commit teaches the method to
avoid tracing its dependencies more than once. Otherwise the code does
an all-paths walk needlessly.
The try_compile command builds the cmTryCompileExec executable using the
cmTryCompileExec/fast target with Makefile generators in order to save
time since dependencies are not needed. However, in project mode the
command builds an entire source tree that may have dependencies.
Therefore we can use the /fast target approach only in one-source mode.
When building an entire source tree with try_compile instead of just a
single source file, it is possible that the CMakeLists.txt file in the
try-compiled project invokes try_compile. This commit fixes propagation
of language-initialization results from the outer-most project into any
number of try-compile levels.
This generalizes the previous CMakeFiles/LabelFiles.txt created at the
top of the build tree to a CMakeFiles/TargetDirectories.txt file. It
lists the target support directories for all targets in the project.
Labels can still be loaded by looking for Labels.txt files in each
target directory.
The second argument of add_subdirectory must name a unique binary
directory or the build files will clobber each other. This enforces
uniqueness with an error message.
This creates a new LABELS property for targets and source files. We
write the labels of each target and its source files in target-specific
locations in the build tree for future use.
During bootstrap we do not bother with rule hashing. This updates the
dummy implementation to account for the recent change in rule hash
method signatures.
This simplifies computation of custom command rule hashes to hash
content exactly chosen as the custom commands are generated.
Unfortunately this will change the hashes of existing build trees from
earlier CMake versions, but this is not a big deal. The change is
necessary so that in the future we can make optional adjustments to
custom command lines at generate time without changing the hashes every
time the option is changed.
Previously the cmGlobalGenerator::GetDirectoryContent method would work
safely only during build system generation. These changes make it safe
to use during each configure step by flushing it at the beginning.
When looking for NOTFOUND libraries, use the direct dependencies of a
target instead of all dependencies. At least one target will trigger
the NOTFOUND error anyway because at least one must directly link it.
This removes another use of the old-style link line computation.
After reporting an error about circular target dependencies do not try
to continue generation because the dependency computation object is not
in a useful state.
- The source-file signature of try_compile looks up the language
of the source file using the extension-to-language map so that
it knows what language to enable in the generated project.
- This map needs to be filled before loading a file specified by
CMAKE_USER_MAKE_RULES_OVERRIDE
CMAKE_USER_MAKE_RULES_OVERRIDE_<LANG>
so that the user file may call the try_compile() source-file
signature.
- It must still be re-filled after loading CMake<LANG>Information.cmake
in case the compiler- or platform-specific files added anything.
- See bug #7340.
ENH: -if no compiler has been found, don't test it, and also remove the compiler
information file again. This makes optionally enabling a language work
better.
Alex
- The rule hash should use only commands specified by the user.
- No make output (echo and progress) rules should be included.
- No outputs or dependencies need be included. The native build tool
will take care of them.
- In CMake 2.4 custom commands would not rebuild when rules changed.
- In CMake 2.6.0 custom commands have a dependency on build.make
which causes them to rebuild when changed, but also when any
source is added or removed. This is too often.
- We cannot have a per-rule file because Windows filesystems
do not deal well with lots of small files.
- Instead we add a persistent CMakeFiles/CMakeRuleHashes.txt file
at the top of the build tree that is updated during each
CMake Generate step. It records a hash of the build rule for
each file to be built. When the hash changes the file is
removed so that it will be rebuilt.
- Previously this was done implicitly by the check for a target
link language which checked all source full paths.
- The recent change to support computing a link language without
finding all the source files skipped the implicit check.
- This change adds an explicit check to find all source files.
- CMake 1.8 and below did not do the check but could get in
infinite loops due to the local generate step.
- CMake 2.0 added the check but failed to perform it in directories
with no targets (see bug #678).
- CMake 2.2 removed the local generate which fixed the problem but
did not remove the check.
- Between CMake 2.4 and 2.6.0rc6 the check was fixed to work even
when no targets appear in a directory (see bug #6923).
- Bottom line: the check is no longer needed.
- Cycles may be formed among static libraries
- Native build system should not have cycles in target deps
- Create cmComputeTargetDepends to analyze dependencies
- Identify conneced components and use them to fix deps
- Diagnose cycles containing non-STATIC targets
- Add debug mode property GLOBAL_DEPENDS_DEBUG_MODE
- Use results in cmGlobalGenerator as target direct depends
- Imported frameworks have the FRAMEWORK property set
- Added cmTarget::IsFrameworkOnApple method to simplify checks
- Also remove separate IMPORTED_ENABLE_EXPORTS property and just use ENABLE_EXPORTS since, like FRAMEWORK, it just represents the target type.
- Document FRAMEWORK keyword in INSTALL command.
- Updated IMPORTED_LOCATION property documentation for Frameworks
- Created cmExportFileGenerator hierarchy to implement export file generation
- Installed exports use per-config import files loaded by a central one.
- Include soname of shared libraries in import information
- Renamed PREFIX to NAMESPACE in INSTALL(EXPORT) and EXPORT() commands
- Move addition of CMAKE_INSTALL_PREFIX to destinations to install generators
- Import files compute the installation prefix relative to their location when loaded
- Add mapping of importer configurations to importee configurations
- Rename IMPORT targets to IMPORTED targets to distinguish from windows import libraries
- Scope IMPORTED targets within directories to isolate them
- Place all properties created by import files in the IMPORTED namespace
- Document INSTALL(EXPORT) and EXPORT() commands.
- Document IMPORTED signature of add_executable and add_library
- Enable finding of imported targets in cmComputeLinkDepends
- This is purely an implementation improvement. No interface has changed.
- Create cmComputeLinkInformation class
- Move and re-implement logic from:
cmLocalGenerator::ComputeLinkInformation
cmOrderLinkDirectories
- Link libraries to targets with their full path (if it is known)
- Dirs specified with link_directories command still added with -L
- Make link type specific to library names without paths
(name libfoo.a without path becomes -Wl,-Bstatic -lfoo)
- Make directory ordering specific to a runtime path computation feature
(look for conflicting SONAMEs instead of library names)
- Implement proper rpath support on HP-UX and AIX.
Configure() gets easier to overview
-improve the error message, now it also says in which directories and for
which targets the missing variables are used
-minor speedup: the include directories don't have to be checked per target,
per directory is enough
Alex
two-step priority (None or Prefered)
Current order: ASM 0, C 10, Fortran 20, CXX 30, Java 40
This is the same order as automake choses:
http://www.gnu.org/software/automake/manual/html_node/How-the-Linker-is-Chosen.html
This change should be backward compatible:
if there is a project using fortran and CXX, they had to set the
LINKER_LANGUAGE explicitely, otherwise cmake complained (but still generated
the project files). Explicitely setting the linker language still overrides
automatic detection.
If somebody has a custom language for cmake and the PREFERENCE starts with
"P", its changed to 100, which gives it preference over all other languages
(except the other custom languages which have also "Prefered"). "None" is
converted to 0.
Alex
something like this:
ENABLE_LANGUAGE(ASM-ATT)
IF(CMAKE_ASM-ATT_COMPILER_WORKS)
... do assembler stufff
ELSE(CMAKE_ASM-ATT_COMPILER_WORKS)
... fallback to generic C/C++
ENDIF(CMAKE_ASM-ATT_COMPILER_WORKS)
Alex
CMakeDetermineSystem.cmake, since CMAKE_SYSTEM_NAME might already be preset
when using cmake for cross compiling
use type STRING instead of FILEPATH since otherwise a strange filename was
generated
Alex
CMake-SourceFile2-bp and CMake-SourceFile2-b-mp1 to trunk. This
commit is surrounded by tags CMake-SourceFile2-b-mp1-pre and
CMake-SourceFile2-b-mp1-post on the trunk.
The changes re-implement cmSourceFile and the use of it to allow
instances to be created much earlier. The use of cmSourceFileLocation
allows locating a source file referenced by a user to be much simpler
and more robust. The two SetName methods are no longer needed so some
duplicate code has been removed. The strange "SourceName" stuff is
gone. Code that created cmSourceFile instances on the stack and then
sent them to cmMakefile::AddSource has been simplified and converted
to getting cmSourceFile instances from cmMakefile. The CPluginAPI has
preserved the old API through a compatibility interface.
Source lists are gone. Targets now get real instances of cmSourceFile
right away instead of storing a list of strings until the final pass.
TraceVSDependencies has been re-written to avoid the use of
SourceName. It is now called TraceDependencies since it is not just
for VS. It is now implemented with a helper object which makes the
code simpler.
second part copies the values from the cmake variables into internal maps.
So this can now be done after the compiler-specific information has been
loaded, which can now overwrite more settings.
Alex
write generators for IDE projects, which use already existing makefiles
(current the kdevelop generator)
-first stept of the export interface, iniitial export() command
-more replacements for the FIND_XXX docs
Alex
"imported" executable target. This can then be used e.g. with
ADD_CUSTOM_COMMAND() to generate stuff. It adds a second container for
"imported" targets, and FindTarget() now takes an additional argument bool
useImportedTargets to specify whether you also want to search in the
imported targets or only in the "normal" targets.
Alex
add_custom_target() as COMMAND, and cmake will recognize them and replace
them with the actual output path of these executables. Also the dependency
will be added automatically. Test included.
ENH: moved TraceVSDependencies() to the end of GlobalGenerator::Configure(),
so it is done now in one central place
Alex
Stephen Kelly
Brad King
David Cole
Peter Collingbourne
Alex Neundorf
Johan Björk
Ben Boeckel
Bill Hoffman
Ken Martin
Andy Cedilnik