- Add TIFF::TIFF imported target
- Document imported target
- Add testcase to test the standard variables and the imported
target
Also:
- Add TIFF_INCLUDE_DIRS to match common practice
- Update documentation generally, including documenting
TIFF_INCLUDE_DIRS
If multiple input files are provided then the destination must be a
directory. If only one input file is provided then destination may be
either a file or directory.
7a327727 Embarcadero: Fix erroneous interpretation of __CODEGEARC_VERSION__.
25211d75 Compiler ID: Compiler versions must be a valid, numeric version string.
060442c2 Embarcadero: Check code using CMAKE_CXX_COMPILER_ID and CMAKE_C_COMPILER_ID.
f3b3219c Embarcadero/Watcom: Properly skip VSResource test for other generators.
ddbda722 Embarcadero: Fix bug where duplicate Ninja job pools would be created.
The CMAKE_CXX_COMPILER_ID and CMAKE_C_COMPILER_ID variables are set to
"Borland" for older versions of the compiler. Newer CodeGear/Embarcadero
compilers will have those variables set to "Embarcadero". Search for lines of
code referencing both the variable name and Borland to be sure that they also
refer to Embarcadero.
A typical iOS application bundle (also Framework Bundle) contains the
application executable and any resources used by the application (for
instance, the application icon, other images, and localized content) in
the top-level bundle directory. The same rule applies to Framework
Bundles.
Explicitly enable deprecated warnings by default, via the
cmake::GetSuppressDeprecatedWarnings method, which signals
suppression is turned off unless the CMake variables are set
as required.
Add tests and update the documentation for the new
functionality.
Change the '-Wdev' and '-Wno-dev' options to also enable and
suppress the deprecated warnings output, via the
'CMAKE_WARN_DEPRECATED' CMake variable, by default. This
action does not happen if the user specifies a deprecated
warning message option.
Add tests and update the documentation for the new
functionality.
Add 'deprecated' warning options type, to allow setting
CMAKE_WARN_DEPRECATED via the -W '-Wdeprecated' and
'-Wno-deprecated' options.
Add tests for new options and updated documentation.
Refactor the -Wdev and -Wno-dev options parser to use a generic -W
parser that follows the GCC pattern, excluding support for
-Werror=TYPE and -Wno-error=TYPE formats for now.
Explicitly enable author warnings by default, via the
cmake::GetSuppressDevWarnings method, which signals suppression
is turned off unless the CMake variables are set as required.
Add test cases for author and deprecated messages displayed by
default.
Make the message suppression more consistent, by adding a check
for the message related CMake variables in cmake::IssueMessage,
which allows callers of IssueMessage other than the message
command to behave as expected. Also added a check for
CMAKE_SUPPRESS_DEVELOPER_WARNINGS in the message command to
mirror the deprecated message type behaviour.
Added a 'force' flag to the cmake::IssueMessage method, to
make the message suppression consistent, when setting the
message related CMake variables directly in a CMake file.
Expand message command tests to cover the AUTHOR_WARNING message
type as well.
Change the Cobertura handler to look for an environment variable
called "COBERTURADIR" which contains the directory where the
coverage.xml file is found. If that variable doesn't exist,
continue to use the default of the binary directory.
Update the test to use an appropriate value in the environment
variables.
This fixes a bug where 64 bit builds with /bigobj incorrectly determined
that the object files were not 64 bit. This manifested itself with
printf type functions showing up as undefined because the leading
underscore was being removed and should not be removed.
If a custom command has a SYMBOLIC output (that is never actually
created) then do not mark the custom command build statement as
'restat'. Otherwise other custom commands that depend on the symbolic
output may not always re-run because after running the first custom
command Ninja 'restat' will detect that the output timestamp did not
change and skip its dependents.
This was observed with the ExternalProject BUILD_ALWAYS option where
Ninja would not re-run the 'install' step each time 'build' re-runs.
Refactoring in commit v3.4.0-rc1~74^2~1 (MSVC: Rewrite manifest file
handling with Makefile and Ninja, 2015-09-15) broke handling of this
option. Fix it and add a test case.
Commit c389f8bb (cmLocalGenerator: Port Find method away from
GetGeneratorTarget, 2015-10-25) ported the implementation of
FindGeneratorTargetToUse away from the FindTargetToUse method,
but neglected to handle alias targets.
The latter method has a parameter to determine whether to
include alias targets in the search, but as that is only
needed at configure time, this generate-time equivalent does
not need the condition.
Changes in commit v3.4.0-rc1~124^2~1 (cmFindProgramCommand: Re-implement
search using more flexible approach, 2015-09-01) did not preserve the
behavior of looking for the given name with no search path at all.
Fix this and add a test case covering finding an absolute path with
no search directories.
In some cases, CMake returned the following error:
-- Checking for module 'foo'
-- Package 'foo' not found
When the actual error returned by pkg-config was:
Package 'bar', required by 'foo', not found
Now, the actual error is forwarded to the user.
-- Checking for module 'foo'
-- Package 'bar', required by 'foo', not found
For the standard case (i.e. the package was indeed not found), the
CMake error was:
-- Checking for module 'foo'
-- Package 'foo' not found
But it now prints:
-- Checking for module 'foo'
-- No package 'foo' found
The associated test was also updated. ${last} refers to the last
CLI argument.
Refactoring in commit v3.4.0-rc1~390^2~1 (cmCTestMultiProcessHandler:
Refactor RUN_SERIAL implementation, 2015-06-01) forgot to update a code
path for cleaning up after a failed RUN_SERIAL test. This causes an
infinite loop after a RUN_SERIAL test fails. Fix it and add a test.
a4bbdc5e cmLocalGenerator: Remove cmGeneratorTargetsType from setter API.
04b6bb16 cmLocalGenerator: Simplify semantic of adding generator targets.
400e3d19 cmLocalGenerator: Don't store imported generator targets
726e461b CMP0063: Split unit test by target type.
Commit v3.4.0-rc1~494^2~4 (cmMakefile: Add API for elseif to create
backtrace., 2015-05-29) removed the use of cmMakefileCall to push/pop
execution context in favor of a new way to create backtraces.
However, a call to cmMakefile::GetExecutionContext is still invoked to
issue a contextual CMP0054 warning through cmConditionEvaluator. As
the elseif is not part of the call stack, this resulted in trying to
access an empty vector.
Avoid the attempt at getting execution context when evaluating elseif by
constructing a context and backtrace on behalf of the cmConditionEvaluator
in all cases.
The HTML file for the Delphi Code coverage was being found by the
Dashboard coverage run of CMake itself. Switch it to be a configured
file to eliminate this extra reading.
Add new API for the subdirs command to cmState.
This fixes a regression introduced in commit f716460e (cmMakefile: Move
invokation to initialize snapshot., 2015-10-06).
Revert commit v3.4.0-rc1~10^2~2 (Features: Disable support for Oracle
SolarisStudio on non-Linux, 2015-09-29) and two follow-up commits.
The support of compile features and language standards on Orcale
SolarisStudio needs more investigation so for CMake 3.4 we should
just act as 3.3 did.
2402bb8c Help: Document Windows 10 Universal Applications in cmake-toolchains(7)
1be2f12c VS: Add support for Windows 10 Universal (Store) Applications
2798dbda VS: Refactor indentation of LinkLibraryDependencies
8c426183 MSVC: Add system libs for WindowsStore on VS 2015
d1b87d72 VS: Select Windows 10 Store SDK and toolset for VS 2015
Teach the VS 2015 generator to support WindowsStore 10.0 applications.
Add target properties to customize them:
* VS_WINDOWS_TARGET_PLATFORM_MIN_VERSION: Specifies the minimum version
of the OS that the project can target.
* VS_DESKTOP_EXTENSIONS_VERSION, VS_MOBILE_EXTENSIONS_VERSIONS,
VS_IOT_EXTENSIONS_VERSION: Add a reference to the version of the SDK
specified to the target allowing to target the extended functionality in
a universal project.
* VS_IOT_STARTUP_TASK: Specifies that the target should be
built as an IOT continuous background task.
5fdf7594 Tests: Suppress WriteCompilerDetectionHeader failure on SunPro
c824b23d Features: Fix C++98 flags on Oracle SolarisStudio 12.4 on Linux
61bc0f73 Features: Disable support for Oracle SolarisStudio on non-Linux
On an Oracle 12.4 build the c_using_fortran executable cannot find the
"fsu" library at runtime. Since this is an implementation detail of the
"hello" library, link that library to it privately so that "-lfsu" does
not propagate to the executables consuming it.
Rather than using the CXXFLAGS environment variable in the make-only
build, copy the CMAKE_CXX_FLAGS used to build the files on the CMake
side. This will account for any changes made by CompileFlags.cmake
or cache-provided flags.
Use the run_cmake() function to generate the test build tree with
the proper CMake generator and also to verify that it succeeds.
Drop our PreTestError helper as it is no longer needed.
The DEPENDENCIES test case uses install(TARGETS) and so generates a warning:
CMake Warning in CMakeLists.txt:
WARNING: Target "test_prog" has runtime paths which cannot be changed
during install. To change runtime paths, OS X version 10.6 or newer is
required. Therefore, runtime paths will not be changed when installing.
CMAKE_BUILD_WITH_INSTALL_RPATH may be used to work around this limitation.
Set CMAKE_BUILD_WITH_INSTALL_RPATH to avoid the warning since we do not
need to run the binaries from the build tree anyway.
We do support SunPro 5.13 compiler features, but only on Linux.
Suppress the portion of the test that fails on Solaris until
the larger problem can be addressed.
9298f56d CPack: allow packaging of empty directories
ecd71c9c SystemTools: time operations on directories
19c6f4ee SystemTools: set time file permissions
749a140a CPackDeb: allow empty directories in component packages
The Ninja generator and Visual Studio generators are special-cased for the
QtAutogen feature. In order to reduce the number of custom targets, the Visual
Studio generators prefer to create custom commands instead, and in order to
create appropriate Ninja files, generated rcc files are listed as byproducts.
This requires the use of the GetConfigCommonSourceFiles API of the
cmGeneratorTarget for those generators when initializing the autogen target.
The initializer method is called from Compute() after the cmGeneratorTarget
objects are created, however the initialization of the object directory occurs
later in the InitGeneratorTargets method. That means that the resulting object
locations are computed incorrectly and cached before the object directory is
determined, so the generated buildsystem can not find the object files.
The initialization of the object directory was split from the creation of
cmGeneratorTarget instances in commit 0e0258c8 (cmGlobalGenerator: Split
creation of generator object from initialization., 2015-07-25). The motivation
for the split was to do only what is essential to do early in cases where
cmGeneratorTargets need to be created at configure-time. That is required for
the purpose of implementing policies CMP0024 and CMP0026, and for
try_compile(LINK_LIBRARIES). However, the split was not really necessary.
Compute the object directory in the cmGeneratorTarget constructor instead.
The QtAutogen unit test already tests the use of TARGET_OBJECTS with AUTOMOC,
and that test already passes on Ninja. The reason it already passes is that
the QtAutogen target also uses the AUTORCC feature, and specifies several qrc
files in its SOURCES. Later in the Compute algorithm (after the
InitGeneratorTargets call), the rcc files are determined and target->AddSource
is called. The AddSource call clears the previously mentioned cache of source
files, causing it to be regenerated when next queried, this time taking account
of the object directory.
Extend the test suite with a new target which does not make use of AUTORCC with
qrc files so that the test added alone would break without the fix in this
commit.
Some commands on Windows do not understand forward slash paths and
require backslashes. In order to help projects generate shell
invocations of such commands, provide a generator expression to convert
paths to the shell-preferred path format for the current generator.
This will allow custom commands to generate paths the same way CMake
does for compiler command invocations.
The latter is now the preferred URL for visiting cmake.org with a
browser. Convert using the shell code:
git ls-files -z | xargs -0 sed -i 's|http://www\.cmake|https://cmake|g'
In the Ninja generator we run all build rules from the top of the build
tree rather than changing into each subdirectory. Therefore we convert
all paths relative to the HOME_OUTPUT directory. However, the Convert
method on cmLocalGenerator restricts relative path conversions to avoid
leaving the build tree with a "../" sequence. Therefore conversions
performed for "subdirectories" that are outside the top of the build
tree always use full paths while conversions performed for
subdirectories that are inside the top of the build tree may use
relative paths to refer to the same files.
Since Ninja always runs rules from the top of the build tree we should
convert them using only the top-level cmLocalGenerator in order to
remain consistent. Also extend the test suite with a case that fails
without this fix.
The changes in commit 47b060ae (CPackDeb: allow empty directories in
component packages, 2015-09-21), commit b58de9fe (CPack: allow packaging
of empty directories, 2015-09-21), and commit b761e90d (CPack: remove
accidental changes, 2015-09-22) regressed packaging of CMake itself.
Revert the changes until they can be revised and rebased on other
changes that make additional fixes.
fff9434d FindThreads: officially announce it works with only C++ enabled
66db914a FindThreads: fix printing a pointer value in test code
0b38424c FindThreads: make the call to try_run() work also if only C++ is enabled
9924a212 FindThreads: replace CheckIncludeFiles by CheckIncludeFile
a27bc0cc Check(Function|Library|Symbol)Exists: make it work if only C++ is enabled
7279f293 FindThreads: add simple testcase
The changes in commit c96fe0b4 (cmake: Add -W options to control
deprecation warnings and errors, 2015-07-28) fail to account for
-Wdev warnings produced by places in CMake other than message().
This causes a regression in which -Wno-dev fails to suppress such
warnings. Revert the feature until it can be revised accordingly.
2514e426 CMP0026: Use compatibility codepath until configure is finished (#15748)
b98f7712 cmGlobalGenerator: Add API for the configure step being finished.
b5de2bd9 cmLocalGenerator: Simplify condition.
If variable is set to TRUE, values of all variables prefixed with CPACK_
will be escaped so special characters such as dolar sign, quotes or
foreward slash will not be lost. By default variable is treated as set
to FALSE for back compatibility.
The cpack_encode_variables macro is changed into a function to remove
scope pollution. There should be no other effects.
Use it instead of the similar cmMakefile API. It is necessary to
know that the Configure step is completely done, not just that one
particular cmMakefile is finished configuring.
Prior to commit 611220f7 (cmTarget: Use reliable test for CMP0024 and CMP0026
OLD., 2015-07-25), this was determined by checking whether cmGeneratorTargets
exist yet, which happens after the Configure step.
Add ctest command-line options:
--test-output-size-passed <n>
--test-output-size-failed <n>
to set the amount of test output to store in Test.xml as a command-line
dashboard client.
Add documentation and tests for the existing
CTEST_CUSTOM_MAXIMUM_PASSED_TEST_OUTPUT_SIZE
CTEST_CUSTOM_MAXIMUM_FAILED_TEST_OUTPUT_SIZE
CTest variables.
e134e53b Add support for *.manifest source files with MSVC tools
da00be63 MSVC: Rewrite manifest file handling with Makefile and Ninja
d488b5c9 Ninja: Always add OBJECT_DIR variable to link rules
6d620f5a VS: Add manifest tool settings to VS 8 and 9 project files
f38625be Tests: Teach RunCMake to tolerate 'Bullseye Testing' lines in test output
1a75a966 Tests: Teach RunCMake to tolerate 'Time Machine' lines in test output
becb14c9 CPack/DEB: test preserve extra config file permissions
7044e8ee CPackDeb: use of libarchive and removal of fakeroot
415405a3 cmArchiveWrite: control user/group, permissions and recursive file adding
4f2ff601 Tests: Make RunCMake.CPack error messages more readable
81b748ae cmGeneratedFileStream: Fix spelling in comment
Classify .manifest sources separately, add dependencies on them, and
pass them to the MS manifest tool to merge with linker-generated
manifest files.
Inspired-by: Gilles Khouzam <gillesk@microsoft.com>
When testing under Bullseye coverage, some tests get lines on stderr of
the form:
... Bullseye Testing Technology ...
Remove such lines from output before matching because they are not
representative of the actual test output.
On some OS X machines some tests get lines on stderr of the form:
... attempting to exclude an item from Time Machine by path ...
produced by the system. Remove such lines from output before matching
because they are not representative of the actual test output.
7a6e5f06 Tests: Cover find_program when the environment duplicate some HINTS
40122975 Merge branch 'fix-bad-search-ordering' into test-search-ordering
02440154 find_*: Fix search order when the environment duplicates some HINTS
When compiling with
LDFLAGS='-Wl,-z,relro -specs=/usr/lib/rpm/redhat/redhat-hardened-ld'
the compiler output includes a line like
COLLECT_GCC_OPTIONS='-specs=/usr/lib/rpm/redhat/redhat-hardened-ld' ...
that our link line regex matches due to an argument ending in "-ld".
Since it is not really the link line no implicit link information is
dectected. Exclude "VAR=..." lines from consideration as link lines to
fix this.
Extend the RunCMake.set_property test with cases covering buildsystem
directory properties:
* COMPILE_DEFINITIONS
* COMPILE_OPTIONS
* INCLUDE_DIRECTORIES
Also test a non-buildsystem property to document the equivalence
in behavior.
This is a change in behavior from CMake 3.3, but there is no semantic meaning
to empty entries in buildsystem properties. This also restores behavior to
that of CMake 2.8.10.
Mangling is prevented by using a function instead of a macro for setting
default value of some CPack variables. Function is meant for internal use
in CPack.cmake only.
Old macro is deprecated but kept for backwards compatibility - was
intended for internal use only as it can't be used for CPack after
CPack.cmake script is included.
Patch removes local workarounds that were required by old macro,
fixes default setting of variables that by default inherit value from
another variable that already went through old default setting macro
(e.g. value of CPACK_PACKAGE_INSTALL_REGISTRY_KEY caused error for
wrong escapes if CPACK_PACKAGE_INSTALL_DIRECTORY contained escaped
back slashes) and provides a test for correct escaping of characters.
9cdf6ef4 Swift: Add proper Swift compiler test
1aa29f0d Swift: Remove positive Swift language tests
d778a1c2 Swift: Require Xcode 6.1 and for MacOS X at least SDK 10.10
4da60024 Swift: Fix Compiler-Id detection for Swift 2
874a265c Swift: Make SwiftMix compatible with Swift 2
b9856862 Tests: Cover set_property for buildsystem target properties
407ff47e cmTarget: Fix memory leak when SOURCES property is cleared
cf74fc24 cmTarget: Fix buildsystem property empty value set and append operations
8ea7611b find_program: Optionally consider all names in each directory
fc1990c9 cmFindProgramCommand: Re-implement search using more flexible approach
fdbfc9f6 Tests: Add explicit testing for find_program
907a919b cmSystemTools: Drop unused StringEndsWith method
ed4de3c9 cmFindProgramCommand: Use Names member instead of passing it
bf32b95e cmFindLibraryCommand: Avoid repeating search for the same name
It's relatively complex to determine in advance if a Xcode, SDK,
and Deployment Target configuration is capable of running Swift.
For example the following combinations do not work:
* deployment target < OS X 10.9
* Xcode 6.2 and macosx10.9 SDK
* Xcode 7 Beta 6 and macosx10.10 SDK
Until we found out how to query Xcode for Swift support in a reliable
way, the RunCMake.Swift test cases will be restricted to negative ones.
The Watcom compiler does not have stream operators for std::string.
Since KWSys no longer provides the operators for us, just use c_str()
to avoid the problem and allow the test to compile on Watcom.
Extend the RunCMake.set_property test with cases covering buildsystem
target properties:
* COMPILE_DEFINITIONS
* COMPILE_FEATURES
* COMPILE_OPTIONS
* INCLUDE_DIRECTORIES
* LINK_LIBRARIES
* SOURCES
Also test a non-buildsystem property to document the current difference
in behavior. Refactor the existing LINK_LIBRARIES case to the same
more-extensive test as the rest. Use the output generated by CMake 3.3
as the expected output for each test case.
The test case added to RunCMake.set_property by commit 675ef165 (Allow
LINK_SEARCH_{START,END}_STATIC props to have default values, 2015-08-07)
is not a test of the set_property command and so belongs in its own test
case. Create a new RunCMake.LinkStatic test to cover cases related to
static linking.
While at it, simplify the LINK_SEARCH_STATIC test case to enable only C.
When more than one value is given to the NAMES option this command by
default will consider one name at a time and search every directory for
it. Add a NAMES_PER_DIR option to tell this command to consider one
directory at a time and search for all names in it.
Previously this command was tested only implicitly as part of larger
tests. Add a RunCMake.find_program test to cover find_program cases
specifically and independently.
Commit 899458ab (Tests: Cover NO_SONAME property for SHARED libraries,
2015-08-20) introduced a few new ExportImport tests, and the
check_lib_{no}soname.cmake scripts that parse readelf(1)'s output.
Make the regular expression matching the SONAME line output by readelf
less strict, as the output format varies across implementations: GNU
binutils' readelf is the only one to write each ELF header within
parentheses (which the previous regular expression expected). The new
tests were thus failing when either Fedora's elfutils (eu-readelf) or
elftoolchain's readelf (present on recent FreeBSD versions) were being
used, as they both list the headers without parentheses.
The same issue also affected Tests/Plugin's check_mod_soname.cmake, so
fix that one as well -- the only reason the test was not failing is that
it tested that the regular expression did not match, which was always
the case with a non-binutils readelf.
ad262917 Xcode: Add unit test for iOS project install (#12506)
48fe617e Fix installation of iOS targets (#12506)
d2c2319d Replace CMAKE_XCODE_EFFECTIVE_PLATFORMS with call to PlatformIsAppleIos
CPackConfig.cmake file generation from CMake test suite.
Currently it contains only a simple test without special
characters in variable value.
Test is not part of RunCMake/CPack as those tests are
expected to be run for a specified generator.
Currently the CMAKE_XCODE_EFFECTIVE_PLATFORMS property acts only as
a kind of toggle switch to enable iOS project layout features.
But instead of relying on this undocumented property, better detect
the presence of an iOS SDK directly.
Starting with Xcode 7 the OSX and iOS SDKs contain only stub
files for dynamic system libraries. These stub files contain
some meta data and a list of exported sysbols in plain text.
They are handled by the toolchain like regular dylibs.
04e708d8 Remove use of include <cmsys/IOStream.hxx> from KWSys
e8585f45 Remove use of include <cmsys/stl/*> and cmsys_stl::*
6db713c0 Remove use of include <cmsys/ios/*> and cmsys_ios::*
Refactoring in commit 6ed9c7e0 (cmState: Host buildsystem properties for
directories, 2015-07-18) broke include_directories(BEFORE). Fix it and
add a test case.
This property was added by commit v2.8.9~204^2~2 (Support building
shared libraries or modules without soname, 2012-04-22). A test for
using the property on MODULE libraries was added by commit
v2.8.9~204^2~1 (Test NO_SONAME property, 2012-04-23). Add such a test
for SHARED libraries too.
Since support for generator expressions was added to OUTPUT_NAME it is
possible for project code to cause recursion in this method by using a
$<TARGET_FILE> genex. Detect and reject such cases.
In the get_filename_component command, add a new BASE_DIR parameter to
use with the ABSOLUTE and REALPATH options. This will be used when
finding an absolute path from a relative path.
Use the CMAKE_LINK_SEARCH_START_STATIC and CMAKE_LINK_SEARCH_END_STATIC
variables to initialize the LINK_SEARCH_START_STATIC and
LINK_SEARCH_END_STATIC target properties respectively.
The change in commit 27252b24 (cmComputeLinkInformation: Simplify
generator object access, 2015-08-02) broke the conditional use of a
target introduced in commit 41abdc17 (cmGeneratorTarget: Move GetSOName
from cmTarget, 2015-08-04). Restore the conditional lookup. Add a test
case that hacks platform information variables to trigger this code
everywhere.
If {ARCHIVE,LIBRARY,RUNTIME}_OUTPUT_DIRECTORY is set with a genex then
do not add the per-config subdirectory on multi-config generators.
This will allow projects to use $<CONFIG> to place the per-config
part of the directory path somewhere other than the end.
d035e968 get_filename_component: Fix bug where CACHE was ignored.
38ed5866 get_filename_component: Added initial tests for PROGRAM component.
772ca69f get_filename_component: Tests now check for proper CACHE usage.
If PROGRAM_ARGS is provided to get_filename_component, fix bug where the
command failed to honor the CACHE argument.
Added test cases to RunCMake.get_filename_component that fail when the
bug is not fixed to prevent regressions.
Signed-off-by: James Johnston <johnstonj.public@codenest.com>
The RunCMake.get_filename_component test now tests basic functionality
of the PROGRAM component argument of get_filename_component.
Signed-off-by: James Johnston <johnstonj.public@codenest.com>
The RunCMake.get_filename_component test was improved to assert that
each test variable outputted by get_filename_component is or is not
a cache variable, as per the particular test.
Signed-off-by: James Johnston <johnstonj.public@codenest.com>
nmake and jom generators no longer warn about missing INCLUDE/LIB
environment variables unless the C/CXX compiler cannot be found. This
is useful if the user does not want to use these generators with the
Visual C++ compiler, or they do not want to enable any language.
Refactoring in commit v3.3.0-rc1~76^2 (cmMakefile: Handle CMP0014 before
configuring the generator, 2015-05-14) accidentally left the file name
"/CMakeLists.txt" in the error message. Remove it and add a test case.
if(TEST TestNameThatExists) will return true if a test with the name
TestNameThatExists has been added with add_test. The syntax is similar
to if(TARGET TargetName). Since use of "TEST" as an argument to if()
could previously be interpreted as a non-keyword argument, add policy
CMP0064 to treat it as a keyword as NEW behavior.
da98b896 Tests: In CTestTest2 skip the kwsys.testProcess-10 test that leaks
129640f2 CTestCustom: Ignore kwsys.testProcess-10 for MemCheck as KWSys does
d0915bc8 Merge branch 'upstream-kwsys' into update-kwsys
1feafc64 KWSys 2015-07-30 (f63febb7)
This test intentionally leaks memory so KWSys excludes it from MemCheck.
However, when CTestTest2 runs under our own MemCheck then valgrind may
recursively check tests run by ctest_test() calls in our test.cmake
script. Teach these calls to exluce testProcess-10 too. Also read
the KWSys CTestCustom.cmake file so ctest_memcheck() will ignore the
test too.
Refactor the -Wdev and -Wno-dev to use a generic -W parser that follows
the GCC pattern. Include support for setting CMAKE_ERROR_DEPRECATED and
CMAKE_WARN_DEPRECATED via the deprecated warning. Add -Werror=dev and
-Wno-error=dev options so that dev warning options are in line with
deprecated warning options. Use a new CMAKE_SUPPRESS_DEVELOPER_ERRORS
internal cache entry to store the above new dev options persistently.
Add tests for new options and updated cmake documentation and release
notes to list new options.
The --trace option is helpful, but sometimes, what you're looking for is
deep under many layers of function calls and figuring out what instance
of the function call you're looking at is tedious to determine (usually
involving patching and message()). Instead, add a --trace-expand option
to trace while expanding commands into what CMake actually sees.
The actual file timestamp dependency is known to not work on
Visual Studio or Xcode generators. Tolerate such failure for
these generators (Tests/CustomCommand already covers using
OBJECT_DEPENDS to pull a custom command into a target, and
that still works with these generators).
3e6b2ab6 CPack/DEB: component version of PACKAGE_CONTROL_EXTRA
506f6bc0 CPack/DEB: Remove duplicate string(TOUPPER) calls
32e9276a Tests/RunCMake/CPack/DEB: add verifyDebControl
47d1f118 Tests/RunCMake/CPack: found files should be preserved
Add variable CTEST_CHANGE_ID to configure the setting. This allows
CTest clients to give CDash information about what change is being
tested so that CDash can take actions to report the results (e.g. to a
pull request page).
Package file names that are found during validation
should be preserved in FOUND_FILE_${NO} variables
that can be later used in custom VerifyResult scripts.
Extend the Nsight Tegra project generator to add bunch of properties
with the backing variables to fine-tune the generated projects.
Add target properties that map to all "Configuration" PropertyGroups for
each configuration:
* ANDROID_ARCH
* ANDROID_STL_TYPE
Add target properties that map to the AntBuild section of vcxproj files:
* ANDROID_ANT_ADDITIONAL_OPTIONS
* ANDROID_ASSETS_DIRECTORIES
* ANDROID_JAR_DEPENDENCIES
* ANDROID_JAR_DIRECTORIES
* ANDROID_JAVA_SOURCE_DIR
* ANDROID_NATIVE_LIB_DEPENDENCIES
* ANDROID_NATIVE_LIB_DIRECTORIES
* ANDROID_PROCESS_MAX
* ANDROID_PROGUARD
* ANDROID_PROGUARD_CONFIG_PATH
* ANDROID_SECURE_PROPS_PATH
* ANDROID_SKIP_ANT_STEP
Reviewed-by: Dmitry Polyanitsa <dpolyanitsa@nvidia.com>
Move failure cases from the CMake.{If,List,While,GetProperty} tests over
to the RunCMake.{if,list,while,get_property} tests to use the more
modern infrastructure. This also avoids using REGEX_ESCAPE_STRING to
try to regex-match full paths.
Subsume the CTestTestConfigFileInBuildDir test cases into the
RunCMake.ctest_start test as new cases to avoid infrastructure
duplication. This also avoids using REGEX_ESCAPE_STRING to try to
regex-match full paths.
Commit v3.3.0-rc1~196^2~7 (cmake: Simplify command clean up
loop., 2015-04-12) introduced a bug that built-in commands which
were renamed no longer had their original name restored when
cleanup is performed between configure runs. Check for that
and restore the commands with their original name.
Extend the complex test for this. That test is run by ctest with
the --build-two-config command line option.
We use a special dedicated structure to store the LINK_LIBRARIES target
property. Do not try to construct a string from a NULL value. Instead
leave the property structure empty when no value is given.
Reported-by: Ghyslain Leclerc <ghleclerc@gmail.com>
Since commit v3.3.0-rc1~397^2 (Check*CompilerFlag: Refactor method used
to pass flags, 2015-02-24) these check modules pass the flags to the
compiler front-end during linking as well as during compilation. This
breaks checks for flags like '-x c++' that are meant only for the
compilation step. Revert the change and add a test covering a
compiler-only flag.
8f86407c Windows: Optionally generate DLL module definition files automatically
069aa93b bindexplib: Add support for "/bigobj" format objects
61bbbdcf bindexplib: Fix treatment of some symbols
de70c922 bindexplib: Teach DumpFile to return errors
8ea69dfe bindexplib: Build source as part of CMakeLib
2963cb2a bindexplib: Wrap long lines
4ff09893 bindexplib: Drop code that CMake does not need
7de8276c bindexplib: Add copyright/license notice block
65086ad7 bindexplib: Import original implementation from CERN
d2475bb5 cmListFileBacktrace: Implement in terms of cmState::Snapshot.
238aac23 cmListFile: Remove FilePath member from cmListFileContext.
329098a9 cmMakefile: Set the FilePath on the frame from the cmState.
91158a33 cmMakefile: Create intermediate variables for snapshot frames.
821f91d6 cmMakefile: Create a scoped context for parsing listfiles.
30d44efa cmMakefile: Access the execution list file from the cmState.
6361f680 cmState: Store execution context.
94704d75 cmState: Add GetCallStackParent method.
a8e54460 cmState: Store snapshots for more different types.
dbafb015 cmMakefile: Split CallStack into two pieces.
27ff19a9 cmLinkedTree: Add operator* to the iterator.
Allow the `Swift` language to be enabled with the Xcode generator for
Xcode >= 6.1. Reject it on other generators and with older Xcode
versions. Since Apple is the only vendor implementing the language
right now, the compiler id can be just `Apple`.
Added new USES_TERMINAL option to the ExternalProject_Add_Step
function. This option passes USES_TERMINAL to the underlying
add_custom_command call so that the Ninja console pool is used.
Also, corresponding new USES_TERMINAL_<step> options were added
to the ExternalProject_Add function.
Justification: if using Ninja with a CMake superbuild, it's often
desirable to limit the superbuild to ONE sub-Ninja process at a
time to avoid oversubscribing the CPU. Using the console pool also
makes it easy to monitor the progress of the sub-Ninja process.
Independent USES_TERMINAL_<step> arguments are passed to
ExternalProject_Add instead of one USES_TERMINAL argument that
controls everything. Users may wish to run some steps in parallel
but not others (e.g. parallelize configure but not build).
Create target property WINDOWS_EXPORT_ALL_SYMBOLS to automatically
generate a module definition file from MS-compatible .obj files and give
it to the linker in order to export all symbols from the .dll part of a
SHARED library.
In commit v3.3.0-rc1~352^2~3 (Genex: Allow COMPILE_LANGUAGE when
processing compile definitions, 2015-03-04) the name of the variable
used to pass preprocessor definitions to the Fortran dependency scanner
was changed to be per-language, but the actual dependency scanning code
was not updated accordingly. Update the code and add a test case.
Reported-by: Radovan Bast <radovan.bast@gmail.com>
Add a TestLoad setting to CTest that can be set via a new --test-load
command-line option, CTEST_TEST_LOAD variable, or TEST_LOAD option to
the ctest_test command. Teach cmCTestMultiProcessHandler to measure
the CPU load and avoid starting tests that may take more than the
spare load currently available. The expression
<current_load> + <test_processors> <= <max-load>
must be true to start a new test.
Co-Author: Zack Galbreath <zack.galbreath@kitware.com>
If a Windows resource (.rc) source file is included in a STATIC library,
the VS "link" tool will process the compiled ".res" file and needs to know
the target architecture. Without it, we may get a LNK4068 warning and
possibly a LNK1112 error. Add /machine: to the default static library
flags to give the link tool the information it needs.
Since commit v3.3.0-rc1~62^2~5 (cmTarget: Store only cmListFileContext
for CMP0023 handling, 2015-05-18) a call to target_link_libraries on a
target that was defined in another (non-ancestor) directory crashes
because no execution context is left active. Fix this by getting the
execution context from the actual cmMakefile where the current
target_link_libraries call takes place. Test this by verifying that
such calls correctly produce an error diagnostic instead of crashing.
When writing export files, correctly encode property values that contain
characters special to the CMake language parser. We must ensure that
they parse correctly when loaded on the consuming side.
Reported-by: Dan Liew <dan@su-root.co.uk>
The fix in commit v3.2.3~3^2 (Fix assertion failure on unmatched foreach
in function, 2015-05-18) broke handling of unmatched non-loop blocks
because it assumed all function blockers removed during error unwinding
were for loops, essentially switching the set of mishandled cases.
The purpose of the loop block push/pop operations is to define a scope
matching the lifetime of the loop function blockers. Since our function
blockers already have the proper lifetime, simply move the push/pop
operations to their constructor/destructor.
Extend the RunCMake.Syntax test with a case covering this.
Since Qt 5.4.2, it is necessary to compile against Qt 5 with -fPIC
and not -fPIE when using GCC 5. Not doing so results in a hanging
test in this case, so use the PIC flag directly instead.
In commit v3.2.0-rc1~480^2 (QtAutogen: Regenerate qrc files if their input
changes, 2014-09-17) the "cmake -E cmake_autogen" rule was switched from
always running to running as a custom command with dependencies if rcc
is enabled. This is not correct because automoc always needs to re-run.
Switch back to always running the command.
8bcec4d2 Help: Add notes for topic 'GNUInstallDirs-special-prefixes'
c8bd37ec GNUInstallDirs: Add special cases for certain prefixes
5f30f175 GNUInstallDirs: Add test cases
Teach the module to handle SYSCONFDIR and LOCALSTATEDIR properly if
CMAKE_INSTALL_PREFIX is set to `/` or `/usr` -- i.e. as expected by GNU
Coding Standard (i.e. set SYSCONFDIR to `/etc` and `LOCALSTATEDIR` to
`/var`). Also if CMAKE_INSTALL_PREFIX is set to /opt/pkg, `SYSCONFDIR`
must be set to `/etc/opt/pkg` and `LOCALSTATEDIR` to `/var/opt/pkg`
according to FHS.
Add a RunCMake.GNUInstallDirs test with cases covering various install
prefixes. Hard-code the architecture information. Tolerate all
platform-specific LIBDIR values.
Currently the root prefix is not handled well, but verify the current
behavior in the test anyway. This can be addressed with a future
change.
Inspired-by: Alex Turbov <i.zaufi@gmail.com>
Move PARTIALLY_RELOCATABLE_WARNING test to the new common CPack test
script structure to have all tests in one place as well as additional
benefit of having some more checks done during test execution.
Create a <LANG>_COMPILER_LAUNCHER target property (initialized by a
CMAKE_<LANG>_COMPILER_LAUNCHER variable) to specify a compiler launcher
tool. This will supersede the CMAKE_<LANG>_COMPILER_ARG1 approach to
using such tools. The old approach set CMAKE_<LANG>_COMPILER to the
launcher tool while the new approach leaves this variable set to the
actual compiler.
Implement this property for Makefile and Ninja generators. It cannot be
implemented for VS or Xcode generators as the IDE build tools offer no
such hooks.
The VS >= 10 generators need to parse the .sln file from the build
directory to locate targets in subdirectories. This occurs after we
change the working directory to the build tree. If a relative directory
other than "." was given then we would change to it and also refer to
the .sln file location with it. Fix this by converting the build tree
to a full path always. This will also give a more informative error
message when the directory does not exist.
Make RETURN_VALUE report -1 if the update command failed as the
documentation claims. Also avoid reporting a ctest script-level failure
if the update command fails because we still correctly administered the
update step.
Use the KWSys Process "MergeOutput" option to give each test child
process the same pipe for both stdout and stderr. This allows natural
merging of stdout and stderr together instead of merging on arbitrary
buffered read boundaries as before.
The CMAKE_FRAMEWORK_PATH and CMAKE_APPBUNDLE_PATH cache variables are
supposed to be used to generate the extra paths passed to pkg-config,
but instead the CMAKE_PREFIX_PATH variable is used.
This bug was introduced by the refactor in commit v3.1.0-rc1~747^2~1.
The <LANG>_VISIBILITY_PRESET and VISIBILITY_INLINES_HIDDEN were first
merged in commit v2.8.12~322 (Merge topic 'VISIBILITY_PRESET-property',
2013-06-05) but worked only for shared libraries and executables with
exports. Prior to commit v3.0.0-rc1~581^2 (GenerateExportHeader:
Deprecate add_compiler_export_flags function., 2013-09-02) the
add_compiler_export_flags function was used to add visibility flags to
all targets.
The visibility flags are useful for sources in all target types because
they may be later linked into shared libraries or executables with
exports. Introduce policy CMP0063 to enable them for all target types
while preserving compatibility with existing projects that do not expect
this.
Enable languages only in the individual test case. Enable the test
everywhere except Visual Studio generators (which do not implement the
properties) and just set fake flags as needed to activate relevant code
paths. Drop unneeded CMAKE_SUPPRESS_REGENERATION which seems to have
been copied from an unrelated test when this test was created.
Add an ExternalData_NO_SYMLINKS to enable use of copies instead of
symlinks to populate the real data files behind a DATA{} reference.
This will be useful on UNIX-like systems when the underlying filesystem
does not actually support symbolic links.
Suggested-by: Matt McCormick <matt.mccormick@kitware.com>
The 'ctest --launch' command must be placed before the IWYU launcher on
the compiler command line. Extend the RunCMake.IncludeWhatYouUse test
to cover this case. The Ninja generator already does it correctly.
This reverts commit f85db2f323.
Discussion by the QtCreator community at
https://bugreports.qt.io/browse/QTCREATORBUG-13695
raises concerns about this particular approach to working with CMake
projects using QtCreator. Also, the functionality and design of the QBS
extra generator was never discussed on the CMake mailing list or with
QtCreator developers. There may be better ways to make the two tools
work together.
In order to avoid committing to long-term support of this generator
prior to such discussion taking place, revert it from CMake for now.
We may restore this or use an alternative design based on results of
such discussion.
Create a <LANG>_INCLUDE_WHAT_YOU_USE target property (initialized by a
CMAKE_<LANG>_INCLUDE_WHAT_YOU_USE variable) to specify an IWYU command
line to be run along with the compiler.
Add an internal "cmake -E __run_iwyu" mode to wrap the compiler call.
Run a given include-what-you-use command line with the compiler options
and report a warning if it finds anything. Then run the real compiler.
Co-Author: Brad King <brad.king@kitware.com>
d7923b82 Use std::unordered_map instead of hash_map where available.
820777af Tests: Don't rely on ordering of targets in maps.
921d74d8 AutoGen: Don't iterate over a container while populating it.
61d52e6e cmListFileBacktrace: Hide the context-stack implementation detail.
a271f7f1 cmTarget: Simplify CMP0023 message loop.
f4300cd4 cmTarget: Simplify output computation.
65a42849 cmTarget: Store context in stack only if different.
9645cba3 cmListFileContext: Implement EqualityComparable.
52a8d19c cmTarget: Store only cmListFileContext for CMP0023 handling.
59ba1215 cmTarget: Remove needless iteration.
18f810a8 cmListFileContext: Sort by line before file.
e96b5d14 cmListFileContext: Implement LessThanComparable.
7eb0dfa0 cmMakefile: Use std::set::insert API to simplify CMP0054 handling.
f9785e0c cmMakefile: Simplify CMP0054 handling.
e17b5e42 cmMakefile: Add access to the top-level execution context.
1ec1bf9f if(): Test the effect of cmMakefileCall use in elseif() handling.
9b4aefad cmMakefile: Replace deques with vectors.
The lexical scope counting added by commit v3.2.0-rc1~332^2~1 (Track
nested loop levels in CMake language with a stack of counters,
2014-11-18) forgot to account for scopes popped by error messages about
unclosed scopes. Teach the error handler to pop the lexical scope it
reports as unclosed. Re-order the lexical scope RAII object to be
inside the variable scope RAII object scope so that the lexical scope
is fully closed before we check assertions about variable scopes.
Extend the RunCMake.Syntax test with a case covering this.
ce167b54 cmMakefile: Handle CMP0014 before configuring the generator.
7baef756 cmLocalGenerator: Assert that there is a parent.
63255342 cmMakefile: Remove redundant variable set.
894961af cmMakefile: Use the state to determine the parent directory.
115e9199 Use new top-level check abstraction.
c5059c90 cmLocalGenerator: Add abstraction to check if top-level.
b17686d2 cmGlobalGenerator: Move some flags from cmLocalGenerator.
ed41a8e7 cmLocalGenerator: Port loops to cmState::Snapshot.
48a9e91b cmState: Add an accessor for Parent snapshot and a validity check.
e7f7c2e2 cmLocalGenerator: Convert two recursive methods to loops.
c5cb3a73 cmLocalGenerator: Get project directories from the cmState.
76b59831 cmLocalGenerator: Initialize state before creating cmMakefile.
34c9ee2e cmLocalGenerator: Require a global generator in the constructor.
3837c483 Tests: Add case for 'ctest' run with bad CTestTestfile
b317b38d cmGlobalBorlandMakefileGenerator: Do not inherit from NMake generator
94867698 Don't use a cmLocalGenerator instance to call static methods.
...
d430cb7c Tests: Fix failures when running under the default install prefix (#15566)
332ee3e3 Tests: Fix CheckSourceTree test when build is under source (#15566)
Fix test cases whose behavior differs when their source or build tree is
under CMAKE_INSTALL_PREFIX by setting an install prefix under the build
tree. Otherwise they may fail when run under the default install prefix
(e.g. /usr/local).
Since the build tree will populate content under the source tree
the test cannot reliably check that the source tree is pristine.
Simply skip most of the test in this case.
CPack DEB and RPM generators were not used for some tests because
CPACK_BINARY_DEB and CPACK_BINARY_RPM variable were not set. Fix this,
simplify generator selection in CTEST_RUN_CPackComponentsForAll, and fix
bugs that were detected after tests were run.
Use the KWSys Process "MergeOutput" option to give the child process
the same pipe (or file) for both stdout and stderr. This allows
natural merging of stdout and stderr together instead of merging
on arbitrary buffered read boundaries as before.
The VSExcludeFromDefaultBuild have not been enabled on VS >= 10 since
commit v3.0.0-rc1~260^2~9 (Tests: Simplify VSExcludeFromDefaultBuild
configuration, 2013-11-14). Since commit v3.0.0-rc1~260^2~2 (VS: Add
CMAKE_VS_(DEVENV|MSBUILD|MSDEV)_COMMAND variables, 2013-12-04) we can
simply check the CMAKE_VS_DEVENV_COMMAND variable for a devenv tool
to use for the test.
This reverts commit 242c3966 (add_custom_command: Diagnose
MAIN_DEPENDENCY limitation, 2015-03-09) and the follow up commit
b372a99a (UseSWIG: Do not use MAIN_DEPENDENCY on custom commands,
2015-03-26).
I misdiagnosed the underlying issue that prompted creation of policy CMP0057.
The actual issue surfaces when a single custom command's MAIN_DEPENDENCY
is listed in more than one target; this issue will have to be addressed
independently.
The iface_test_bld gets the excludedFromAll include directory with
"-isystem" because it is added indirectly through an imported target.
On AIX with GCC the -isystem flag causes sources to be preprocessed as:
# 3 "/.../excludedFromAll.h" 2 3 4
The flags after the file name are documented here:
https://gcc.gnu.org/onlinedocs/cpp/Preprocessor-Output.html
and the "4" flag says that following content is extern "C". This
causes the excludedFromAll function to be declared as a C symbol
and not mangled for C++, which fails to link later because the
symbol is really provided as C++.
Work around this by setting the NO_SYSTEM_FROM_IMPORTED target property
on iface_test_bld. Somehow iface_test_exp does not end up with -isystem
so we do not need this workaround for that target.
Use file(GENERATE) to write the logging wrapper scripts to evaluate
generator expressions. Use a per-config script names in case the
content varies by configuration.
Use file(GENERATE) to write the initial cache file so that we can
evaluate generator expressions. Use a per-config initial cache file
name in case the content varies by configuration.
Add an ExternalProjectSubdir test directory with a minimal test showing
use of ExternalProject_Add for a source tree in a subdirectory. This
will allow us to easily add test external projects that cover specific
behavior where the client project must check results.
The stderr may have warning messages. We should not treat these lines
as resource files. However, we must still recognize error message lines
for missing resource files that may be generated.
Extend the QtAutogen test to cover a generated resource as the only one
listed in a .qrc file. This causes 'rcc --list' to print a warning to
stderr that we now intend to ignore.
Extend the RunSingleCommand signature to capture stdout and stderr
separately. Allow both to be captured to the same std::string
to preserve existing behavior. Update all call sites to do this
so that this refactoring does not introduce functional changes.
66b641f4 Help: Add notes for topic 'add-GreenHills-MULTI-generator'
48004d9d Add a 'Green Hills MULTI' generator on Windows
051d8be1 cmLocalGenerator: Constify some cmTarget and cmGeneratorTarget arguments
6693590f Xcode: Refine quoting rules for Strings
a6331eb8 Xcode: Let PrintComment decide if the comment is non-empty
6e8952c1 Xcode: PrintComment will prepend a whitespace itself before the comment
4bd2544b Xcode: Do not add whitespace after attribute group opening brace
5cb4c838 Xcode: Properly indent PBXFileReference and PBXBuildFile
a723427b Xcode: Remove extra space in PBXProject comment
2fe8bca5 Xcode: Add comment after root object
2e0e205e Xcode: Indent using tabs
7b68c8df Xcode: Sort Xcode objects by Id
Green Hills MULTI is an IDE for embedded real-time systems. The IDE's
product page can be found here:
http://www.ghs.com/products/MULTI_IDE.html
It supports cross compiling on ARM, Intel x86, and other architectures
with various operating systems. The IDE exists on Linux and Windows
host systems, but CMake will currently only generate the project files
on Windows host systems.
Refactoring of content list that removes
use of find and sed to make listing algorithm
more clear and remove external dependencies.
Patch also limits man pages handling to
locations listed in brp-compress rpm script
by default - fixes bug report #14660.
e8fdd5f1 QtAutogen: Workaround rcc CRCRLF newlines on Windows (#15459)
15f1a6b4 Tests/QtAutogen: Avoid touching files in the source tree
3f7c7c65 Tests/QtAutogen: Help Qt5Autogen test find Qt5 on Windows
26b5cc5e Tests/QtAutogen: Enable per-config source tests when possible
45566408 Tests/QtAutogen: Require CMake 3.1 to set policies everywhere
The UPPERCASE name was inconsistent with config-packages, the
find_dependency macro, and even FPHSA itself, which expects
components to be specified with names matching ExactCase.
The FOUND_VAR was only permitted to have two possible values, and
now both are set for compatibility. Document it as obsolete, and
adjust the code for the same. Users of the variable should just
remove it.
The 'rcc --list' operation may print newlines of the form CRCRLF,
so strip any trailing CR characters found on each line.
Update the Tests/QtAutogen test to use a resource named in a
subdirectory. This causes 'rcc --list' to display a blank line
and tests that it is correctly filtered out.
Pass CMAKE_BUILD_TYPE into the test on generators that use it so that
the per-config part of the test can activate as needed. Do not make the
per-config part conditional on the Debug configuration because the
generator expressions evaluate to empty in other configurations.
Skip the per-config source case with the Ninja generator because it does
not currently work. cmQtAutoGenerators::InitializeAutogenTarget needs
to know the list of source files on a target, but generator expressions
in the list cannot be evaluated until after CreateGeneratorTargets has
been called. That cannot happen until after Autogen targets have been
generated. It is a chicken-and-egg problem.
07d44d63 cmake: Remove confusing duplication.
ea819b29 cmMakefile: Remove unused method.
6ad86c7f cmMakefile: Remove bad comment.
fca2b542 cmMakefile: Internalize setting of CMakeInstance on Properties.
7bb4e3db cmMakefile: Out-of-line Home directory accessors.
6241253a cmake: Out-of-line Home and Start directory methods.
0ee3ccb3 cmake: Fix variable name bugs.
57dd094e Use vector, not list for cmCommand storage.
6deb43e6 Remove some files which do not need to be in BootstrapCommands.
ecdb1b3b Add some missing includes.
04b307b9 cmake: Simplify CommandExists method.
0f1f324b cmake: Rename oddly named variables.
275185ac cmake: Constify GetCommand method.
c57f086a cmake: Don't lower-case a string needlessly.
23368c9b cmake: Use make_pair instead of Foo::value_type.
14c70b8c cmake: out-of-line try compile state methods.
...
9660a3cc Makefile: Fix multiple custom command outputs with one missing
5c08e255 KWSys SystemTools: Teach Touch with !create to succeed on missing file
The use of "cmake -E touch_nocreate" added in commit v3.2.1~4^2
(Makefile: Fix multiple custom command outputs regression, 2015-03-06)
caused builds to fail when one of the outputs is intentionally not
created. This was fixed by our parent commit by making touch_nocreate
succeed when the file is missing. Add a test case covering it.
For the Watcom WMake generator, check for the SYMBOLIC source file
property separately on each output. The mark is needed on outputs that
are not really created to tell 'wmake' not to complain that it is
missing. The mark is also needed on outputs that are created or 'wmake'
will not consider them out of date when they exist.
Inspired-by: Ben Boeckel <ben.boeckel@kitware.com>
Port most CMakeTestBadCommandLines test cases to RunCMake.CommandLine
and drop the former test. Add validation of expected results, which was
not done by the old test.
882f48e5 Link libraries by full path even in implicit directories
318cd370 Help: Add link target for Find Modules section of cmake-developer.7
1535dcd8 Tests: Teach RunCMake to optionally merge command output to stdout
When CMP0003 was first introduced we wanted to link all libraries by
full path. However, some projects had problems on platforms where
find_library would find /usr/lib/libfoo.so when the project really
wanted to link to /usr/lib/<arch>/libfoo.so and had been working by
accident because pre-CMP0003 behavior used -lfoo to link.
We first tried to address that in commit v2.6.0~440 (Teach find_library
to avoid returning library paths in system directories, 2008-01-23) by
returning just "foo" for libraries in implicit link directories. This
caused problems for projects expecting find_library to always return a
full path. We ended up using the solution in commit v2.6.0~366 (...
switch library paths found in implicit link directories to use -l,
2008-01-31). However, the special case for libraries in implicit link
directories has also proven problematic and confusing.
Introduce policy CMP0060 to switch to linking all libraries by full path
even if they are in implicit link directories. Explain in the policy
documentation the factors that led to the original approach and now to
this approach.
Prefix test commands with the CROSSCOMPILING_EMULATOR property
for target executables. This allows test suites to be run on the host
when crosscompiling.
If the CMAKE_CROSSCOMPILING_EMULATOR variable is defined, and
CMAKE_CROSSCOMPILING is TRUE, then use CMAKE_CROSSCOMPILING_EMULATOR to run
the try_run executables. This prevents the need to populate
TryRunResults.cmake when cross compiling.
Add CROSSCOMPILING_EMULATOR target property for executables. This is used by
subsequent patches to run exectuables created for the target system when
crosscompiling. The property is initialized by the
CMAKE_CROSSCOMPILING_EMULATOR variable when defined.
Some tests may need to read "cmake --build" output passed through from
native build tools and do not know if it will be on stdout or stderr.
Optionally use the same variable for the execute_process output so
that it merges them and we can always match using expected stdout.
VS 2013 originally claimed to support initializer lists but a bug was
found in which it generated bad code silently. For this reason we
previously considered support to not be present. However, Update 3 adds
a hard error on cases that previously generated bad code, so it is now
safe to use initializer lists with VS 2013 Update 3 or greater. At
worst a compiler error will be issued in the cases that do not work, but
that is no different from any other compiler-specific workaround a
project code may need.
The only reason this failed to compile on VS 2013 was because the
compiler uses different initializer_list constructor argument types than
our dummy implementation. The standard does not specify the non-default
constructor argument types for initializer_list. Use a template to
match any two-arg constructor a compiler might select (e.g. begin/end or
begin/len). Use #error to preserve the error on VS 2013.
RPM, DEB and archive packages were not created
in cases when CPACK_<generator>_COMPONENT_INSTALL
was set to ON and a single component existed.
Patch also changes CPackRPM test to implicitly
test for this case.
XAML files are by default of type Page in the vcxproj and can be
overriden by setting the VS_XAML_TYPE property. The .cpp and .h file
of the same name are automatically added as depending on the XAML file.
New VSXaml test builds a basic XAML WindowsStore 8.1 app with VS2013.
Otherwise an #include directive on the first line of a source file is
ignored if the file contains a Byte-Order-Mark.
Suggested-by: Aleksey Konovalov <konovalov.aleks@gmail.com>
Add policy CMP0059 to cover this change. The property has been
deprecated since CMake 2.4 anyway.
This will help clean up cmMakefile -- the DefineFlagsOrig member should
not need to exist.
When the cmake sources are all set to read-only (e.g. after importing
into perforce), the CMake.ELF test fails because the copy of the binary
is also read-only and cannot be modified. Fix this by copying the
binary without source permissions.
When matching ctest command-line output, we must account for the
formatting of times that take 10 seconds or more. The values are
right-justified, so use " +" to match any amount of space before them.
RPM packages can contain symbolic links to relative paths - including
support for multiple relocation paths through generation of post install
relocation scripts. Add basic support with limitations described in
documentation.
Revert commit v3.0.0-rc1~175^2~20 (add_dependencies: Disallow use with
INTERFACE_LIBRARY, 2013-12-25). Teach our dependency analysis to
transitively follow INTERFACE target utility dependencies as was done or
IMPORTED targets in commit v2.8.6~127^2~1 (Allow add_dependencies() on
imported targets, 2010-11-19). Extend the InterfaceLibrary test with a
case to cover header generation for a header-only INTERFACE library via
a custom target.
Extend the ``DATA{Dir/,...}`` syntax with a new ``RECURSE:`` option
to enable recursive matching of associated files. This will allow
an entire directory tree of data to be referenced at once.
Bartosz Kosiorek
Brad King
Roger Leigh
Bartosz Kosiorek
James Johnston
Michael Scott
Roger Leigh
Joseph Snyder
Bill Hoffman
Gregor Jasny
Stephen Kelly
Raffi Enficiaud
Benjamin Chrétien
Tamas Kenez
Gilles Khouzam
Domen Vrankar
Stefan Kislinskiy
Rolf Eike Beer
Marc Chevrier
Robert Goulet
Chuck Atkins
Ben Boeckel
Ben Boeckel
Roman Donchenko
Roman Wüger
Raphael Kubo da Costa
Tony Kelman
Felix Geyer
Konstantin Podsvirov
Matt McCormick
Clifford Yapp
Zack Galbreath
Mikhail Filimonov
Daniel Pfeifer
Betsy McPhail
Alex Turbov
Daniele E. Domenichelli
Axel Huebl
Nils Gladitz
Andrey Pokrovskiy
Geoff Viola
Raffi Enficiaud
Gerald Combs
Bill Newcomb
Clinton Stimpson