3e6b2ab6 CPack/DEB: component version of PACKAGE_CONTROL_EXTRA
506f6bc0 CPack/DEB: Remove duplicate string(TOUPPER) calls
32e9276a Tests/RunCMake/CPack/DEB: add verifyDebControl
47d1f118 Tests/RunCMake/CPack: found files should be preserved
Add variable CTEST_CHANGE_ID to configure the setting. This allows
CTest clients to give CDash information about what change is being
tested so that CDash can take actions to report the results (e.g. to a
pull request page).
Package file names that are found during validation
should be preserved in FOUND_FILE_${NO} variables
that can be later used in custom VerifyResult scripts.
Extend the Nsight Tegra project generator to add bunch of properties
with the backing variables to fine-tune the generated projects.
Add target properties that map to all "Configuration" PropertyGroups for
each configuration:
* ANDROID_ARCH
* ANDROID_STL_TYPE
Add target properties that map to the AntBuild section of vcxproj files:
* ANDROID_ANT_ADDITIONAL_OPTIONS
* ANDROID_ASSETS_DIRECTORIES
* ANDROID_JAR_DEPENDENCIES
* ANDROID_JAR_DIRECTORIES
* ANDROID_JAVA_SOURCE_DIR
* ANDROID_NATIVE_LIB_DEPENDENCIES
* ANDROID_NATIVE_LIB_DIRECTORIES
* ANDROID_PROCESS_MAX
* ANDROID_PROGUARD
* ANDROID_PROGUARD_CONFIG_PATH
* ANDROID_SECURE_PROPS_PATH
* ANDROID_SKIP_ANT_STEP
Reviewed-by: Dmitry Polyanitsa <dpolyanitsa@nvidia.com>
Move failure cases from the CMake.{If,List,While,GetProperty} tests over
to the RunCMake.{if,list,while,get_property} tests to use the more
modern infrastructure. This also avoids using REGEX_ESCAPE_STRING to
try to regex-match full paths.
Subsume the CTestTestConfigFileInBuildDir test cases into the
RunCMake.ctest_start test as new cases to avoid infrastructure
duplication. This also avoids using REGEX_ESCAPE_STRING to try to
regex-match full paths.
Commit v3.3.0-rc1~196^2~7 (cmake: Simplify command clean up
loop., 2015-04-12) introduced a bug that built-in commands which
were renamed no longer had their original name restored when
cleanup is performed between configure runs. Check for that
and restore the commands with their original name.
Extend the complex test for this. That test is run by ctest with
the --build-two-config command line option.
We use a special dedicated structure to store the LINK_LIBRARIES target
property. Do not try to construct a string from a NULL value. Instead
leave the property structure empty when no value is given.
Reported-by: Ghyslain Leclerc <ghleclerc@gmail.com>
Since commit v3.3.0-rc1~397^2 (Check*CompilerFlag: Refactor method used
to pass flags, 2015-02-24) these check modules pass the flags to the
compiler front-end during linking as well as during compilation. This
breaks checks for flags like '-x c++' that are meant only for the
compilation step. Revert the change and add a test covering a
compiler-only flag.
8f86407c Windows: Optionally generate DLL module definition files automatically
069aa93b bindexplib: Add support for "/bigobj" format objects
61bbbdcf bindexplib: Fix treatment of some symbols
de70c922 bindexplib: Teach DumpFile to return errors
8ea69dfe bindexplib: Build source as part of CMakeLib
2963cb2a bindexplib: Wrap long lines
4ff09893 bindexplib: Drop code that CMake does not need
7de8276c bindexplib: Add copyright/license notice block
65086ad7 bindexplib: Import original implementation from CERN
d2475bb5 cmListFileBacktrace: Implement in terms of cmState::Snapshot.
238aac23 cmListFile: Remove FilePath member from cmListFileContext.
329098a9 cmMakefile: Set the FilePath on the frame from the cmState.
91158a33 cmMakefile: Create intermediate variables for snapshot frames.
821f91d6 cmMakefile: Create a scoped context for parsing listfiles.
30d44efa cmMakefile: Access the execution list file from the cmState.
6361f680 cmState: Store execution context.
94704d75 cmState: Add GetCallStackParent method.
a8e54460 cmState: Store snapshots for more different types.
dbafb015 cmMakefile: Split CallStack into two pieces.
27ff19a9 cmLinkedTree: Add operator* to the iterator.
Allow the `Swift` language to be enabled with the Xcode generator for
Xcode >= 6.1. Reject it on other generators and with older Xcode
versions. Since Apple is the only vendor implementing the language
right now, the compiler id can be just `Apple`.
Added new USES_TERMINAL option to the ExternalProject_Add_Step
function. This option passes USES_TERMINAL to the underlying
add_custom_command call so that the Ninja console pool is used.
Also, corresponding new USES_TERMINAL_<step> options were added
to the ExternalProject_Add function.
Justification: if using Ninja with a CMake superbuild, it's often
desirable to limit the superbuild to ONE sub-Ninja process at a
time to avoid oversubscribing the CPU. Using the console pool also
makes it easy to monitor the progress of the sub-Ninja process.
Independent USES_TERMINAL_<step> arguments are passed to
ExternalProject_Add instead of one USES_TERMINAL argument that
controls everything. Users may wish to run some steps in parallel
but not others (e.g. parallelize configure but not build).
Create target property WINDOWS_EXPORT_ALL_SYMBOLS to automatically
generate a module definition file from MS-compatible .obj files and give
it to the linker in order to export all symbols from the .dll part of a
SHARED library.
In commit v3.3.0-rc1~352^2~3 (Genex: Allow COMPILE_LANGUAGE when
processing compile definitions, 2015-03-04) the name of the variable
used to pass preprocessor definitions to the Fortran dependency scanner
was changed to be per-language, but the actual dependency scanning code
was not updated accordingly. Update the code and add a test case.
Reported-by: Radovan Bast <radovan.bast@gmail.com>
Add a TestLoad setting to CTest that can be set via a new --test-load
command-line option, CTEST_TEST_LOAD variable, or TEST_LOAD option to
the ctest_test command. Teach cmCTestMultiProcessHandler to measure
the CPU load and avoid starting tests that may take more than the
spare load currently available. The expression
<current_load> + <test_processors> <= <max-load>
must be true to start a new test.
Co-Author: Zack Galbreath <zack.galbreath@kitware.com>
If a Windows resource (.rc) source file is included in a STATIC library,
the VS "link" tool will process the compiled ".res" file and needs to know
the target architecture. Without it, we may get a LNK4068 warning and
possibly a LNK1112 error. Add /machine: to the default static library
flags to give the link tool the information it needs.
Since commit v3.3.0-rc1~62^2~5 (cmTarget: Store only cmListFileContext
for CMP0023 handling, 2015-05-18) a call to target_link_libraries on a
target that was defined in another (non-ancestor) directory crashes
because no execution context is left active. Fix this by getting the
execution context from the actual cmMakefile where the current
target_link_libraries call takes place. Test this by verifying that
such calls correctly produce an error diagnostic instead of crashing.
When writing export files, correctly encode property values that contain
characters special to the CMake language parser. We must ensure that
they parse correctly when loaded on the consuming side.
Reported-by: Dan Liew <dan@su-root.co.uk>
The fix in commit v3.2.3~3^2 (Fix assertion failure on unmatched foreach
in function, 2015-05-18) broke handling of unmatched non-loop blocks
because it assumed all function blockers removed during error unwinding
were for loops, essentially switching the set of mishandled cases.
The purpose of the loop block push/pop operations is to define a scope
matching the lifetime of the loop function blockers. Since our function
blockers already have the proper lifetime, simply move the push/pop
operations to their constructor/destructor.
Extend the RunCMake.Syntax test with a case covering this.
Since Qt 5.4.2, it is necessary to compile against Qt 5 with -fPIC
and not -fPIE when using GCC 5. Not doing so results in a hanging
test in this case, so use the PIC flag directly instead.
In commit v3.2.0-rc1~480^2 (QtAutogen: Regenerate qrc files if their input
changes, 2014-09-17) the "cmake -E cmake_autogen" rule was switched from
always running to running as a custom command with dependencies if rcc
is enabled. This is not correct because automoc always needs to re-run.
Switch back to always running the command.
8bcec4d2 Help: Add notes for topic 'GNUInstallDirs-special-prefixes'
c8bd37ec GNUInstallDirs: Add special cases for certain prefixes
5f30f175 GNUInstallDirs: Add test cases
Teach the module to handle SYSCONFDIR and LOCALSTATEDIR properly if
CMAKE_INSTALL_PREFIX is set to `/` or `/usr` -- i.e. as expected by GNU
Coding Standard (i.e. set SYSCONFDIR to `/etc` and `LOCALSTATEDIR` to
`/var`). Also if CMAKE_INSTALL_PREFIX is set to /opt/pkg, `SYSCONFDIR`
must be set to `/etc/opt/pkg` and `LOCALSTATEDIR` to `/var/opt/pkg`
according to FHS.
Add a RunCMake.GNUInstallDirs test with cases covering various install
prefixes. Hard-code the architecture information. Tolerate all
platform-specific LIBDIR values.
Currently the root prefix is not handled well, but verify the current
behavior in the test anyway. This can be addressed with a future
change.
Inspired-by: Alex Turbov <i.zaufi@gmail.com>
Move PARTIALLY_RELOCATABLE_WARNING test to the new common CPack test
script structure to have all tests in one place as well as additional
benefit of having some more checks done during test execution.
Create a <LANG>_COMPILER_LAUNCHER target property (initialized by a
CMAKE_<LANG>_COMPILER_LAUNCHER variable) to specify a compiler launcher
tool. This will supersede the CMAKE_<LANG>_COMPILER_ARG1 approach to
using such tools. The old approach set CMAKE_<LANG>_COMPILER to the
launcher tool while the new approach leaves this variable set to the
actual compiler.
Implement this property for Makefile and Ninja generators. It cannot be
implemented for VS or Xcode generators as the IDE build tools offer no
such hooks.
The VS >= 10 generators need to parse the .sln file from the build
directory to locate targets in subdirectories. This occurs after we
change the working directory to the build tree. If a relative directory
other than "." was given then we would change to it and also refer to
the .sln file location with it. Fix this by converting the build tree
to a full path always. This will also give a more informative error
message when the directory does not exist.
Make RETURN_VALUE report -1 if the update command failed as the
documentation claims. Also avoid reporting a ctest script-level failure
if the update command fails because we still correctly administered the
update step.
Use the KWSys Process "MergeOutput" option to give each test child
process the same pipe for both stdout and stderr. This allows natural
merging of stdout and stderr together instead of merging on arbitrary
buffered read boundaries as before.
The CMAKE_FRAMEWORK_PATH and CMAKE_APPBUNDLE_PATH cache variables are
supposed to be used to generate the extra paths passed to pkg-config,
but instead the CMAKE_PREFIX_PATH variable is used.
This bug was introduced by the refactor in commit v3.1.0-rc1~747^2~1.
The <LANG>_VISIBILITY_PRESET and VISIBILITY_INLINES_HIDDEN were first
merged in commit v2.8.12~322 (Merge topic 'VISIBILITY_PRESET-property',
2013-06-05) but worked only for shared libraries and executables with
exports. Prior to commit v3.0.0-rc1~581^2 (GenerateExportHeader:
Deprecate add_compiler_export_flags function., 2013-09-02) the
add_compiler_export_flags function was used to add visibility flags to
all targets.
The visibility flags are useful for sources in all target types because
they may be later linked into shared libraries or executables with
exports. Introduce policy CMP0063 to enable them for all target types
while preserving compatibility with existing projects that do not expect
this.
Enable languages only in the individual test case. Enable the test
everywhere except Visual Studio generators (which do not implement the
properties) and just set fake flags as needed to activate relevant code
paths. Drop unneeded CMAKE_SUPPRESS_REGENERATION which seems to have
been copied from an unrelated test when this test was created.
Add an ExternalData_NO_SYMLINKS to enable use of copies instead of
symlinks to populate the real data files behind a DATA{} reference.
This will be useful on UNIX-like systems when the underlying filesystem
does not actually support symbolic links.
Suggested-by: Matt McCormick <matt.mccormick@kitware.com>
The 'ctest --launch' command must be placed before the IWYU launcher on
the compiler command line. Extend the RunCMake.IncludeWhatYouUse test
to cover this case. The Ninja generator already does it correctly.
This reverts commit f85db2f323.
Discussion by the QtCreator community at
https://bugreports.qt.io/browse/QTCREATORBUG-13695
raises concerns about this particular approach to working with CMake
projects using QtCreator. Also, the functionality and design of the QBS
extra generator was never discussed on the CMake mailing list or with
QtCreator developers. There may be better ways to make the two tools
work together.
In order to avoid committing to long-term support of this generator
prior to such discussion taking place, revert it from CMake for now.
We may restore this or use an alternative design based on results of
such discussion.
Create a <LANG>_INCLUDE_WHAT_YOU_USE target property (initialized by a
CMAKE_<LANG>_INCLUDE_WHAT_YOU_USE variable) to specify an IWYU command
line to be run along with the compiler.
Add an internal "cmake -E __run_iwyu" mode to wrap the compiler call.
Run a given include-what-you-use command line with the compiler options
and report a warning if it finds anything. Then run the real compiler.
Co-Author: Brad King <brad.king@kitware.com>
d7923b82 Use std::unordered_map instead of hash_map where available.
820777af Tests: Don't rely on ordering of targets in maps.
921d74d8 AutoGen: Don't iterate over a container while populating it.
61d52e6e cmListFileBacktrace: Hide the context-stack implementation detail.
a271f7f1 cmTarget: Simplify CMP0023 message loop.
f4300cd4 cmTarget: Simplify output computation.
65a42849 cmTarget: Store context in stack only if different.
9645cba3 cmListFileContext: Implement EqualityComparable.
52a8d19c cmTarget: Store only cmListFileContext for CMP0023 handling.
59ba1215 cmTarget: Remove needless iteration.
18f810a8 cmListFileContext: Sort by line before file.
e96b5d14 cmListFileContext: Implement LessThanComparable.
7eb0dfa0 cmMakefile: Use std::set::insert API to simplify CMP0054 handling.
f9785e0c cmMakefile: Simplify CMP0054 handling.
e17b5e42 cmMakefile: Add access to the top-level execution context.
1ec1bf9f if(): Test the effect of cmMakefileCall use in elseif() handling.
9b4aefad cmMakefile: Replace deques with vectors.
The lexical scope counting added by commit v3.2.0-rc1~332^2~1 (Track
nested loop levels in CMake language with a stack of counters,
2014-11-18) forgot to account for scopes popped by error messages about
unclosed scopes. Teach the error handler to pop the lexical scope it
reports as unclosed. Re-order the lexical scope RAII object to be
inside the variable scope RAII object scope so that the lexical scope
is fully closed before we check assertions about variable scopes.
Extend the RunCMake.Syntax test with a case covering this.
Brad King
Clifford Yapp
Stephen Kelly
Zack Galbreath
Domen Vrankar
Mikhail Filimonov
Robert Goulet
Daniel Pfeifer
James Johnston
Bill Hoffman
Betsy McPhail
Alex Turbov
Daniele E. Domenichelli
Raffi Enficiaud