Since commit v3.3.0-rc1~62^2~5 (cmTarget: Store only cmListFileContext
for CMP0023 handling, 2015-05-18) a call to target_link_libraries on a
target that was defined in another (non-ancestor) directory crashes
because no execution context is left active. Fix this by getting the
execution context from the actual cmMakefile where the current
target_link_libraries call takes place. Test this by verifying that
such calls correctly produce an error diagnostic instead of crashing.
When writing export files, correctly encode property values that contain
characters special to the CMake language parser. We must ensure that
they parse correctly when loaded on the consuming side.
Reported-by: Dan Liew <dan@su-root.co.uk>
The fix in commit v3.2.3~3^2 (Fix assertion failure on unmatched foreach
in function, 2015-05-18) broke handling of unmatched non-loop blocks
because it assumed all function blockers removed during error unwinding
were for loops, essentially switching the set of mishandled cases.
The purpose of the loop block push/pop operations is to define a scope
matching the lifetime of the loop function blockers. Since our function
blockers already have the proper lifetime, simply move the push/pop
operations to their constructor/destructor.
Extend the RunCMake.Syntax test with a case covering this.
Since Qt 5.4.2, it is necessary to compile against Qt 5 with -fPIC
and not -fPIE when using GCC 5. Not doing so results in a hanging
test in this case, so use the PIC flag directly instead.
In commit v3.2.0-rc1~480^2 (QtAutogen: Regenerate qrc files if their input
changes, 2014-09-17) the "cmake -E cmake_autogen" rule was switched from
always running to running as a custom command with dependencies if rcc
is enabled. This is not correct because automoc always needs to re-run.
Switch back to always running the command.
8bcec4d2 Help: Add notes for topic 'GNUInstallDirs-special-prefixes'
c8bd37ec GNUInstallDirs: Add special cases for certain prefixes
5f30f175 GNUInstallDirs: Add test cases
Teach the module to handle SYSCONFDIR and LOCALSTATEDIR properly if
CMAKE_INSTALL_PREFIX is set to `/` or `/usr` -- i.e. as expected by GNU
Coding Standard (i.e. set SYSCONFDIR to `/etc` and `LOCALSTATEDIR` to
`/var`). Also if CMAKE_INSTALL_PREFIX is set to /opt/pkg, `SYSCONFDIR`
must be set to `/etc/opt/pkg` and `LOCALSTATEDIR` to `/var/opt/pkg`
according to FHS.
Add a RunCMake.GNUInstallDirs test with cases covering various install
prefixes. Hard-code the architecture information. Tolerate all
platform-specific LIBDIR values.
Currently the root prefix is not handled well, but verify the current
behavior in the test anyway. This can be addressed with a future
change.
Inspired-by: Alex Turbov <i.zaufi@gmail.com>
Move PARTIALLY_RELOCATABLE_WARNING test to the new common CPack test
script structure to have all tests in one place as well as additional
benefit of having some more checks done during test execution.
Create a <LANG>_COMPILER_LAUNCHER target property (initialized by a
CMAKE_<LANG>_COMPILER_LAUNCHER variable) to specify a compiler launcher
tool. This will supersede the CMAKE_<LANG>_COMPILER_ARG1 approach to
using such tools. The old approach set CMAKE_<LANG>_COMPILER to the
launcher tool while the new approach leaves this variable set to the
actual compiler.
Implement this property for Makefile and Ninja generators. It cannot be
implemented for VS or Xcode generators as the IDE build tools offer no
such hooks.
The VS >= 10 generators need to parse the .sln file from the build
directory to locate targets in subdirectories. This occurs after we
change the working directory to the build tree. If a relative directory
other than "." was given then we would change to it and also refer to
the .sln file location with it. Fix this by converting the build tree
to a full path always. This will also give a more informative error
message when the directory does not exist.
Make RETURN_VALUE report -1 if the update command failed as the
documentation claims. Also avoid reporting a ctest script-level failure
if the update command fails because we still correctly administered the
update step.
Use the KWSys Process "MergeOutput" option to give each test child
process the same pipe for both stdout and stderr. This allows natural
merging of stdout and stderr together instead of merging on arbitrary
buffered read boundaries as before.
The CMAKE_FRAMEWORK_PATH and CMAKE_APPBUNDLE_PATH cache variables are
supposed to be used to generate the extra paths passed to pkg-config,
but instead the CMAKE_PREFIX_PATH variable is used.
This bug was introduced by the refactor in commit v3.1.0-rc1~747^2~1.
The <LANG>_VISIBILITY_PRESET and VISIBILITY_INLINES_HIDDEN were first
merged in commit v2.8.12~322 (Merge topic 'VISIBILITY_PRESET-property',
2013-06-05) but worked only for shared libraries and executables with
exports. Prior to commit v3.0.0-rc1~581^2 (GenerateExportHeader:
Deprecate add_compiler_export_flags function., 2013-09-02) the
add_compiler_export_flags function was used to add visibility flags to
all targets.
The visibility flags are useful for sources in all target types because
they may be later linked into shared libraries or executables with
exports. Introduce policy CMP0063 to enable them for all target types
while preserving compatibility with existing projects that do not expect
this.
Enable languages only in the individual test case. Enable the test
everywhere except Visual Studio generators (which do not implement the
properties) and just set fake flags as needed to activate relevant code
paths. Drop unneeded CMAKE_SUPPRESS_REGENERATION which seems to have
been copied from an unrelated test when this test was created.
Add an ExternalData_NO_SYMLINKS to enable use of copies instead of
symlinks to populate the real data files behind a DATA{} reference.
This will be useful on UNIX-like systems when the underlying filesystem
does not actually support symbolic links.
Suggested-by: Matt McCormick <matt.mccormick@kitware.com>
The 'ctest --launch' command must be placed before the IWYU launcher on
the compiler command line. Extend the RunCMake.IncludeWhatYouUse test
to cover this case. The Ninja generator already does it correctly.
This reverts commit f85db2f323.
Discussion by the QtCreator community at
https://bugreports.qt.io/browse/QTCREATORBUG-13695
raises concerns about this particular approach to working with CMake
projects using QtCreator. Also, the functionality and design of the QBS
extra generator was never discussed on the CMake mailing list or with
QtCreator developers. There may be better ways to make the two tools
work together.
In order to avoid committing to long-term support of this generator
prior to such discussion taking place, revert it from CMake for now.
We may restore this or use an alternative design based on results of
such discussion.
Create a <LANG>_INCLUDE_WHAT_YOU_USE target property (initialized by a
CMAKE_<LANG>_INCLUDE_WHAT_YOU_USE variable) to specify an IWYU command
line to be run along with the compiler.
Add an internal "cmake -E __run_iwyu" mode to wrap the compiler call.
Run a given include-what-you-use command line with the compiler options
and report a warning if it finds anything. Then run the real compiler.
Co-Author: Brad King <brad.king@kitware.com>
d7923b82 Use std::unordered_map instead of hash_map where available.
820777af Tests: Don't rely on ordering of targets in maps.
921d74d8 AutoGen: Don't iterate over a container while populating it.
61d52e6e cmListFileBacktrace: Hide the context-stack implementation detail.
a271f7f1 cmTarget: Simplify CMP0023 message loop.
f4300cd4 cmTarget: Simplify output computation.
65a42849 cmTarget: Store context in stack only if different.
9645cba3 cmListFileContext: Implement EqualityComparable.
52a8d19c cmTarget: Store only cmListFileContext for CMP0023 handling.
59ba1215 cmTarget: Remove needless iteration.
18f810a8 cmListFileContext: Sort by line before file.
e96b5d14 cmListFileContext: Implement LessThanComparable.
7eb0dfa0 cmMakefile: Use std::set::insert API to simplify CMP0054 handling.
f9785e0c cmMakefile: Simplify CMP0054 handling.
e17b5e42 cmMakefile: Add access to the top-level execution context.
1ec1bf9f if(): Test the effect of cmMakefileCall use in elseif() handling.
9b4aefad cmMakefile: Replace deques with vectors.
The lexical scope counting added by commit v3.2.0-rc1~332^2~1 (Track
nested loop levels in CMake language with a stack of counters,
2014-11-18) forgot to account for scopes popped by error messages about
unclosed scopes. Teach the error handler to pop the lexical scope it
reports as unclosed. Re-order the lexical scope RAII object to be
inside the variable scope RAII object scope so that the lexical scope
is fully closed before we check assertions about variable scopes.
Extend the RunCMake.Syntax test with a case covering this.
ce167b54 cmMakefile: Handle CMP0014 before configuring the generator.
7baef756 cmLocalGenerator: Assert that there is a parent.
63255342 cmMakefile: Remove redundant variable set.
894961af cmMakefile: Use the state to determine the parent directory.
115e9199 Use new top-level check abstraction.
c5059c90 cmLocalGenerator: Add abstraction to check if top-level.
b17686d2 cmGlobalGenerator: Move some flags from cmLocalGenerator.
ed41a8e7 cmLocalGenerator: Port loops to cmState::Snapshot.
48a9e91b cmState: Add an accessor for Parent snapshot and a validity check.
e7f7c2e2 cmLocalGenerator: Convert two recursive methods to loops.
c5cb3a73 cmLocalGenerator: Get project directories from the cmState.
76b59831 cmLocalGenerator: Initialize state before creating cmMakefile.
34c9ee2e cmLocalGenerator: Require a global generator in the constructor.
3837c483 Tests: Add case for 'ctest' run with bad CTestTestfile
b317b38d cmGlobalBorlandMakefileGenerator: Do not inherit from NMake generator
94867698 Don't use a cmLocalGenerator instance to call static methods.
...
d430cb7c Tests: Fix failures when running under the default install prefix (#15566)
332ee3e3 Tests: Fix CheckSourceTree test when build is under source (#15566)
Fix test cases whose behavior differs when their source or build tree is
under CMAKE_INSTALL_PREFIX by setting an install prefix under the build
tree. Otherwise they may fail when run under the default install prefix
(e.g. /usr/local).
Since the build tree will populate content under the source tree
the test cannot reliably check that the source tree is pristine.
Simply skip most of the test in this case.
CPack DEB and RPM generators were not used for some tests because
CPACK_BINARY_DEB and CPACK_BINARY_RPM variable were not set. Fix this,
simplify generator selection in CTEST_RUN_CPackComponentsForAll, and fix
bugs that were detected after tests were run.
Use the KWSys Process "MergeOutput" option to give the child process
the same pipe (or file) for both stdout and stderr. This allows
natural merging of stdout and stderr together instead of merging
on arbitrary buffered read boundaries as before.
The VSExcludeFromDefaultBuild have not been enabled on VS >= 10 since
commit v3.0.0-rc1~260^2~9 (Tests: Simplify VSExcludeFromDefaultBuild
configuration, 2013-11-14). Since commit v3.0.0-rc1~260^2~2 (VS: Add
CMAKE_VS_(DEVENV|MSBUILD|MSDEV)_COMMAND variables, 2013-12-04) we can
simply check the CMAKE_VS_DEVENV_COMMAND variable for a devenv tool
to use for the test.
This reverts commit 242c3966 (add_custom_command: Diagnose
MAIN_DEPENDENCY limitation, 2015-03-09) and the follow up commit
b372a99a (UseSWIG: Do not use MAIN_DEPENDENCY on custom commands,
2015-03-26).
I misdiagnosed the underlying issue that prompted creation of policy CMP0057.
The actual issue surfaces when a single custom command's MAIN_DEPENDENCY
is listed in more than one target; this issue will have to be addressed
independently.
The iface_test_bld gets the excludedFromAll include directory with
"-isystem" because it is added indirectly through an imported target.
On AIX with GCC the -isystem flag causes sources to be preprocessed as:
# 3 "/.../excludedFromAll.h" 2 3 4
The flags after the file name are documented here:
https://gcc.gnu.org/onlinedocs/cpp/Preprocessor-Output.html
and the "4" flag says that following content is extern "C". This
causes the excludedFromAll function to be declared as a C symbol
and not mangled for C++, which fails to link later because the
symbol is really provided as C++.
Work around this by setting the NO_SYSTEM_FROM_IMPORTED target property
on iface_test_bld. Somehow iface_test_exp does not end up with -isystem
so we do not need this workaround for that target.
Use file(GENERATE) to write the logging wrapper scripts to evaluate
generator expressions. Use a per-config script names in case the
content varies by configuration.
Use file(GENERATE) to write the initial cache file so that we can
evaluate generator expressions. Use a per-config initial cache file
name in case the content varies by configuration.
Add an ExternalProjectSubdir test directory with a minimal test showing
use of ExternalProject_Add for a source tree in a subdirectory. This
will allow us to easily add test external projects that cover specific
behavior where the client project must check results.
The stderr may have warning messages. We should not treat these lines
as resource files. However, we must still recognize error message lines
for missing resource files that may be generated.
Extend the QtAutogen test to cover a generated resource as the only one
listed in a .qrc file. This causes 'rcc --list' to print a warning to
stderr that we now intend to ignore.
Extend the RunSingleCommand signature to capture stdout and stderr
separately. Allow both to be captured to the same std::string
to preserve existing behavior. Update all call sites to do this
so that this refactoring does not introduce functional changes.
66b641f4 Help: Add notes for topic 'add-GreenHills-MULTI-generator'
48004d9d Add a 'Green Hills MULTI' generator on Windows
051d8be1 cmLocalGenerator: Constify some cmTarget and cmGeneratorTarget arguments
6693590f Xcode: Refine quoting rules for Strings
a6331eb8 Xcode: Let PrintComment decide if the comment is non-empty
6e8952c1 Xcode: PrintComment will prepend a whitespace itself before the comment
4bd2544b Xcode: Do not add whitespace after attribute group opening brace
5cb4c838 Xcode: Properly indent PBXFileReference and PBXBuildFile
a723427b Xcode: Remove extra space in PBXProject comment
2fe8bca5 Xcode: Add comment after root object
2e0e205e Xcode: Indent using tabs
7b68c8df Xcode: Sort Xcode objects by Id
Green Hills MULTI is an IDE for embedded real-time systems. The IDE's
product page can be found here:
http://www.ghs.com/products/MULTI_IDE.html
It supports cross compiling on ARM, Intel x86, and other architectures
with various operating systems. The IDE exists on Linux and Windows
host systems, but CMake will currently only generate the project files
on Windows host systems.
Refactoring of content list that removes
use of find and sed to make listing algorithm
more clear and remove external dependencies.
Patch also limits man pages handling to
locations listed in brp-compress rpm script
by default - fixes bug report #14660.
e8fdd5f1 QtAutogen: Workaround rcc CRCRLF newlines on Windows (#15459)
15f1a6b4 Tests/QtAutogen: Avoid touching files in the source tree
3f7c7c65 Tests/QtAutogen: Help Qt5Autogen test find Qt5 on Windows
26b5cc5e Tests/QtAutogen: Enable per-config source tests when possible
45566408 Tests/QtAutogen: Require CMake 3.1 to set policies everywhere
The UPPERCASE name was inconsistent with config-packages, the
find_dependency macro, and even FPHSA itself, which expects
components to be specified with names matching ExactCase.
The FOUND_VAR was only permitted to have two possible values, and
now both are set for compatibility. Document it as obsolete, and
adjust the code for the same. Users of the variable should just
remove it.
The 'rcc --list' operation may print newlines of the form CRCRLF,
so strip any trailing CR characters found on each line.
Update the Tests/QtAutogen test to use a resource named in a
subdirectory. This causes 'rcc --list' to display a blank line
and tests that it is correctly filtered out.
Pass CMAKE_BUILD_TYPE into the test on generators that use it so that
the per-config part of the test can activate as needed. Do not make the
per-config part conditional on the Debug configuration because the
generator expressions evaluate to empty in other configurations.
Skip the per-config source case with the Ninja generator because it does
not currently work. cmQtAutoGenerators::InitializeAutogenTarget needs
to know the list of source files on a target, but generator expressions
in the list cannot be evaluated until after CreateGeneratorTargets has
been called. That cannot happen until after Autogen targets have been
generated. It is a chicken-and-egg problem.
07d44d63 cmake: Remove confusing duplication.
ea819b29 cmMakefile: Remove unused method.
6ad86c7f cmMakefile: Remove bad comment.
fca2b542 cmMakefile: Internalize setting of CMakeInstance on Properties.
7bb4e3db cmMakefile: Out-of-line Home directory accessors.
6241253a cmake: Out-of-line Home and Start directory methods.
0ee3ccb3 cmake: Fix variable name bugs.
57dd094e Use vector, not list for cmCommand storage.
6deb43e6 Remove some files which do not need to be in BootstrapCommands.
ecdb1b3b Add some missing includes.
04b307b9 cmake: Simplify CommandExists method.
0f1f324b cmake: Rename oddly named variables.
275185ac cmake: Constify GetCommand method.
c57f086a cmake: Don't lower-case a string needlessly.
23368c9b cmake: Use make_pair instead of Foo::value_type.
14c70b8c cmake: out-of-line try compile state methods.
...
9660a3cc Makefile: Fix multiple custom command outputs with one missing
5c08e255 KWSys SystemTools: Teach Touch with !create to succeed on missing file
The use of "cmake -E touch_nocreate" added in commit v3.2.1~4^2
(Makefile: Fix multiple custom command outputs regression, 2015-03-06)
caused builds to fail when one of the outputs is intentionally not
created. This was fixed by our parent commit by making touch_nocreate
succeed when the file is missing. Add a test case covering it.
For the Watcom WMake generator, check for the SYMBOLIC source file
property separately on each output. The mark is needed on outputs that
are not really created to tell 'wmake' not to complain that it is
missing. The mark is also needed on outputs that are created or 'wmake'
will not consider them out of date when they exist.
Inspired-by: Ben Boeckel <ben.boeckel@kitware.com>
Port most CMakeTestBadCommandLines test cases to RunCMake.CommandLine
and drop the former test. Add validation of expected results, which was
not done by the old test.
882f48e5 Link libraries by full path even in implicit directories
318cd370 Help: Add link target for Find Modules section of cmake-developer.7
1535dcd8 Tests: Teach RunCMake to optionally merge command output to stdout
When CMP0003 was first introduced we wanted to link all libraries by
full path. However, some projects had problems on platforms where
find_library would find /usr/lib/libfoo.so when the project really
wanted to link to /usr/lib/<arch>/libfoo.so and had been working by
accident because pre-CMP0003 behavior used -lfoo to link.
We first tried to address that in commit v2.6.0~440 (Teach find_library
to avoid returning library paths in system directories, 2008-01-23) by
returning just "foo" for libraries in implicit link directories. This
caused problems for projects expecting find_library to always return a
full path. We ended up using the solution in commit v2.6.0~366 (...
switch library paths found in implicit link directories to use -l,
2008-01-31). However, the special case for libraries in implicit link
directories has also proven problematic and confusing.
Introduce policy CMP0060 to switch to linking all libraries by full path
even if they are in implicit link directories. Explain in the policy
documentation the factors that led to the original approach and now to
this approach.
Prefix test commands with the CROSSCOMPILING_EMULATOR property
for target executables. This allows test suites to be run on the host
when crosscompiling.
If the CMAKE_CROSSCOMPILING_EMULATOR variable is defined, and
CMAKE_CROSSCOMPILING is TRUE, then use CMAKE_CROSSCOMPILING_EMULATOR to run
the try_run executables. This prevents the need to populate
TryRunResults.cmake when cross compiling.
Add CROSSCOMPILING_EMULATOR target property for executables. This is used by
subsequent patches to run exectuables created for the target system when
crosscompiling. The property is initialized by the
CMAKE_CROSSCOMPILING_EMULATOR variable when defined.
Some tests may need to read "cmake --build" output passed through from
native build tools and do not know if it will be on stdout or stderr.
Optionally use the same variable for the execute_process output so
that it merges them and we can always match using expected stdout.
VS 2013 originally claimed to support initializer lists but a bug was
found in which it generated bad code silently. For this reason we
previously considered support to not be present. However, Update 3 adds
a hard error on cases that previously generated bad code, so it is now
safe to use initializer lists with VS 2013 Update 3 or greater. At
worst a compiler error will be issued in the cases that do not work, but
that is no different from any other compiler-specific workaround a
project code may need.
The only reason this failed to compile on VS 2013 was because the
compiler uses different initializer_list constructor argument types than
our dummy implementation. The standard does not specify the non-default
constructor argument types for initializer_list. Use a template to
match any two-arg constructor a compiler might select (e.g. begin/end or
begin/len). Use #error to preserve the error on VS 2013.
RPM, DEB and archive packages were not created
in cases when CPACK_<generator>_COMPONENT_INSTALL
was set to ON and a single component existed.
Patch also changes CPackRPM test to implicitly
test for this case.
Brad King
Stephen Kelly
Alex Turbov
Domen Vrankar
Bill Hoffman
Daniele E. Domenichelli
Raffi Enficiaud
Axel Huebl
Robert Goulet
Nils Gladitz
Andrey Pokrovskiy
Geoff Viola
Gregor Jasny
Raffi Enficiaud
Gerald Combs
Matt McCormick