8555c2b Look for VCExpress as a possible build tool as well as devenv.
ed0075b Use relative paths for custom command inputs.
38368d5 Revert "With very long file names, VS 2010 was unable to compile files."
8cd66dc Use devenv instead of msbuild for vs2010.
For source files we use full paths. This allows for longer directory
names with VS2010. However, the use of full paths causes the GUI
to not display the custom commands.
As discussed, this adds a switch CMAKE_DISABLE_FIND_PACKAGE_<name>,
which, when set to TRUE, keeps the find_package() command from executing.
When the package is REQUIRED at the same time, an error is generated.
Alex
The workaround added by commit 7e92f0b4 (Hack to make echo command work
properly in mingw32-make, 2006-10-05) and updated by commit 69356d8a
(Juse use cmake -E echo instead of the native echo, 2006-10-13) no
longer seems necessary with modern mingw32-make. Furthermore it slows
performance due to the time spent loading a cmake process instead of
plain echo.
Do not require the C language to be enabled to do lib->lib64 conversion.
The check was originally added by commit a5825cd1 (check in new find
stuff, 2006-03-02) to ensure that CMAKE_SIZEOF_VOID_P is set. Since
commit 3fdf1411 (FIND_LIBRARY should not require CMAKE_SIZEOF_VOID_P,
2008-02-11) the code following the check does not fail when the variable
is not set, so just remove the original check. This allows conversion
for any language that is enabled so long as the address size is known.
Reported-by: Christoph Höger <choeger@cs.tu-berlin.de>
1ed19bc multiarch: Set CMAKE_LIBRARY_ARCHITECTURE_REGEX for Linux|Hurd|kFreeBSD
52a6ed2 Test find_package multiarch support (#12037)
b41ad3b Teach find_(library|package) about Linux multiarch (#12037)
When add_test(NAME) is called without the CONFIGURATIONS argument then
the test is intended to run in any configuration. In multi-config
generators like the VS IDE and Xcode tests created by add_test(NAME) can
only be run when testing a known configuration (otherwise there is no
way to generate the test command line). If no test command line is
known for a particular configuration, or if no configuration is given to
ctest, report the test as not run instead of silently skipping it.
Also fix CMake's own TestsWorkingDirectory test invocation to correct a
previously silent failure exposed by this change.
When generating per-config blocks in test and install scripts replace
the form
IF()
# config == A
ENDIF()
IF()
# config == B
ENDIF()
with
IF()
# config == A
ELSEIF()
# config == B
ELSE()
# no config matches
ENDIF()
for clarity and to support the else() case cleanly.
f09ba0f Fix style errors added by parent and grandparent
eeeeca1 XCode: Support target folders on XCode.
59ed84e Xcode: Support multiple level nesting of XCode folders (#10039)
d0a403f CMake: Move tokenize to cmSystemTools
Implement support for multiarch as specified here:
http://wiki.debian.org/Multiarchhttps://wiki.ubuntu.com/MultiarchSpec
Detect the <arch> part of <prefix>/lib/<arch> from the implicit library
search path from each compiler to set CMAKE_<lang>_LIBRARY_ARCHITECTURE.
Define CMAKE_LIBRARY_ARCHITECTURE using one of these values (they should
all be the same). Teach the find_library and find_package commands to
search <prefix>/lib/<arch> whenever they would search <prefix>/lib.
27aa446 One more try. Use full path by default, and relative on broken compilers.
2dfc121 Use bin tree for inclues to avoid -I with spaces in the path.
6d29b4b Append and do not clobber CMAKE_CXX_FLAGS in the test.
7815e90 Fix for bug#10798. VS10 did not append -I flags with COMPILE_FLAGS prop.
In cmMakefile.cxx GetCMakeCFGInitDirectory is replaced with
GetCMakeFilesDirectory for .rule files. In some cases with
external projects, that directory will not exist. With vs10
the .rule files must exist or the rule will run with every build.
This fix creates the path that the .rule file is in. In addition,
it is now a CMake error if the .rule file can not be created.
A post-build phase of each target invokes the XCODE_DEPEND_HELPER.make
file to erase any targets that link to it. Narrow the set of targets
tested by each post-build phase to those that depend on the newly
completed target. This avoids removing files from partially built
unrelated targets that happen to be building in parallel.
0e591ed Fix type conversion warning
9c3a0b9 We will actually compress memcheck output if the server supports it.
8024c53 Dynamic analysis test output should not be compressed.
cdc2b41 Fix CompileCommandOutput test build on Windows
7039d1f Fix CompileCommandOutput test for Make tools not supporting spaces
4268e3d run_compile_commands: Cast istream::get() result to char
c45c60b run_compile_commands: Avoid extra stl vector conversion
7c5be51 run_compile_commands: Avoid shadow in std::map<>::at workaround
169bb05 Provide std::map<>::at for use in run_compile_commands
4e2185c Make std::map usage more portable in language=>flags/defines maps
a7e7a04 Fix run_compile_commands build on Apple GCC 3.3
c9174c0 Fix signed/unsigned comparison in EscapeJSON
8346a28 Only offer the compile command output feature on unix systems
0e6b05f Adds a test for the compile command line output.
5674844 make compile command output optional
fe07b05 implement cxx command output
65c0c24 cache flags and defines
3f064ef refactor flags and defines
7ff98b7 Fix forced-seed argument type in string(RANDOM)
3d92c8c Explicitly cast time value in cmSystemTools::RandomSeed
eb6f461 VS 6: Define _WIN32_WINNT to load wincrypt.h correctly
e1b0a11 Improve string(RANDOM) default seed
Clang points out that local variable 'seed' needs to be "unsigned int":
Source/cmStringCommand.cxx:828:21: warning: operands of ? are integers
of different signs: 'int' and 'unsigned int' [-Wsign-compare]
srand(force_seed? seed : cmSystemTools::RandomSeed());
^ ~~~~ ~~~~~~~~~~~~~~~~~~~~~~~~~~~
Use static_cast to avoid warnings like
conversion to ‘unsigned int’ from ‘__time_t’ may alter its value
conversion to ‘unsigned int’ from ‘__suseconds_t’ may alter its value
We do not care if the value is truncated because we are looking for just
32 bits anyway.
The Sun compiler does not provide the proper vector constructor to
initialize it from an iterator pair of a non-matching type. Extend the
ParseUnixCommandLine API to provide a vector of the proper type so no
conversion is needed.
The naive time(0) seed is unique only within one second. Instead try to
read a real source of entropy and otherwise fall back to a combination
of the process id and high-resolution time.
Older versions of GCC, the HP compiler, and the SGI MIPSpro compiler do
not like the use of make_pair in this case and the conversions it
requires:
a value of type "const char *" cannot be used to initialize an entity
of type "char [1]"
/usr/include/g++-3/stl_pair.h:68: assignment of read-only location
Instead use a map lookup pattern already used throughout the rest of our
source tree.
Under Windows "locationURI" must be used for virtual folders, while
"location" must be used only for linked folders. Under Linux it doesn't
seem to matter.
Alex
08b9397 find_package: Fix system package registry test path conversion
93021ad find_package: Test system package registry when possible
b95f3ca find_package: Check both 32-bit and 64-bit registry views
a0d76c1 find_package: Search a "system package registry"
549458f find_package: Document user package registry locations
c9563db find_package: Cleanup user package registry less aggressively
4df1197 find_package: Rename implementation of user package registry
08fa5dd Also generate dependers-graphviz files.
4f96a76 GRAPHVIZ_IGNORE_TARGETS is now a list of regular expressions
5698ad2 Make it possible to exlude external libs from dot files
The system package registry is under HKEY_LOCAL_MACHINE\SOFTWARE which
has separate views for 32-bit and 64-bit applications. Look in both
views, but prefer the architecture matching the build target platform.
Generalize the "user package registry" created by commit ed0650f6 (Teach
find_package to search a "package registry", 2009-09-01). Define a
corresponding "system" registry key under HKEY_LOCAL_MACHINE. This
gives package installers a place to create a registry value that points
at the right location for find_package() to locate the package.
Delete only REG_SZ entries that are specifically detected to point to
invalid paths. This will allow future versions to add other value types
for different purposes.
This file has not been used in KWSys since commit "Moved test for large
file support into kwsysPlatformCxxTests.cxx", 2006-08-25. CMake 2.6.0
and above come with a copy of this module anyway, and KWSys has required
CMake 2.6.3 since commit "KWSys: Require at least CMake 2.6.3",
2011-03-01.
234bae7 VS10: Fix exit code of custom commands with setlocal/endlocal (#11938)
b98fdd5 VS: Use setlocal/endlocal only in VS 10 custom commands
06fcbc4 VS10: Fix working directory of consecutive custom commands (#11938)
Use the pattern
setlocal
...
endlocal & call :cmErrorLevel %errorlevel% & goto :cmDone
:cmErrorLevel
exit /b %1
:cmDone
if %errorlevel% neq 0 goto :VCEnd
in custom commands to preserve the %errorlevel% from inside the
setlocal/endlocal block.
The setlocal/endlocal and errorlevel pattern added by commit 06fcbc47
(VS10: Fix working directory of consecutive custom commands, 2011-04-08)
does not work well in VS 7.1. Restore the original behavior for VS
versions that do not need the new behavior.
Copy the files specified in CPACK_DEBIAN_PACKAGE_CONTROL_EXTRA to the right
directory when packaging components. This fixes#12061.
Signed-off-by: Eric NOULARD <eric.noulard@gmail.com>
The parent commit assumed that "cd /d" would work in all Windows shells.
While all modern versions of windows have shells that support it, the
shells used by NMake and Borland make do not. Borland make does not
seem to even support changing drive letters with "d:". Just revert the
feature for all make tools except MinGW where the shell is known to
support this feature.
Teach cmLocalUnixMakefileGenerator3::CreateCDCommand to change working
directories for make tools using a Windows shell using "cd /d" instead
of just "cd". This tells the shell to change the current drive letter
as well as the working directory on that drive.
Commit abaa0267 (When the working directory for a custom command is on
another drive..., 2007-12-17) fixed the same problem for VS IDE
generators as reported by issue #6150.
The VS 10 msbuild tool uses a single command shell to invoke all the
custom command scripts in a project. Isolate the environment and
working directory of custom commands using setlocal/endlocal. The
form of each command is
set errlev=
setlocal
cd c:\work\dir
if %errorlevel% neq 0 goto :cmEnd
c:
if %errorlevel% neq 0 goto :cmEnd
command1 ...
if %errorlevel% neq 0 goto :cmEnd
...
commandN ...
if %errorlevel% neq 0 goto :cmEnd
:cmEnd
endlocal & set errlev=%errorlevel%
if %errlev% neq 0 goto :VCEnd
so that all changes to the environment and working directory are
isolated within the script and the return code is preserved.
Some find modules call find_package recursively to locate a package
configuration file for the package instead of searching for individual
pieces. Commit 79e9b755 (Help recursive find_package calls in modules,
2008-10-03) taught find_package to forward the version number and EXACT
arguments through the recursive call automatically. Do the same for the
component list.
When reading archive entries from disk strip any xattr and acl entry
headers that may have been loaded from the filesystem (e.g. selinux).
These fields are only useful for backup tools and not for packaging and
distribution of software. Furthermore, the GNU tar 1.15.1 on at least
one Linux distribution treats unknown entry headers as an error rather
than a warning. Therefore avoiding such fields is necessary for archive
portability.
Suggested-by: Tim Kientzle <tim@kientzle.com>
3e32db7 cmCTestUploadCommand::CheckArgumentKeyword should return false if not FILES
6b6f309 Add the FILES keyword to ctest_upload command
28cdd0a Don't tar/gz ctest_upload() files
fbe4356 Change 'Files' tag to 'Upload' in Upload.xml
350546d Implement ctest_upload command
For VS2010 if a precompiled .obj file was the output of a custom commad,
it was used as part of the build. If it was not, then VS did not
use it as part of the build. This commit updates the test to check
for this issue, and fixes the problem. This fixes bugs #0011891 and
Also allow generators to override the default packaging method.
Add a ONE_PER_GROUP option so that method can be specified by the user without relying on defaults.
All commands accepting file paths should normalize the slashes so that
the string-represented names can be compared reliably. The commands
add_library and add_executable have done this for years. We taught
add_custom_command to normalize its OUTPUT names in commit a75a0a14
(Normalize add_custom_command OUTPUT names, 2010-12-15). We handled a
special case of the DEPENDS option in commit 7befc007 (Handle trailing
slashes on add_custom_command DEPENDS, 2011-01-26).
Teach both add_custom_command and add_custom_target to normalize slashes
of DEPENDS files up front. This approach subsumes the above-mentioned
special case so remove the one line added for it but keep its test.
Extend the CustomCommand test to check that slash count mismatches
between custom command OUTPUT and DEPENDS can still be linked correctly.
A search-and-replace in commit 8d32d229 (make commands lower case by
default, 2007-10-10) accidentally changed the variable reference
CMAKE_INCLUDE_DIRECTORIES_BEFORE to CMAKE_include_directories_BEFORE.
Change it back.
The curses dialog (ccmake) allows variables to be specified on the
command line. If any of these variables is used during any configure
iteration or during generate we must not warn about it.
The Qt dialog (cmake-gui) allows variables to be added and removed in
the GUI interactively. If a variable is added, removed, and then added
again we must still warn if it is unused.
Set target property RUNTIME_OUTPUT_DIRECTORY explicitly on ProcessFwd9x
and EncodeExecutable so that we know exactly where the executables will
exist on disk.
At some point in the past VS 2010 failed some tests with custom commands when
relative paths were not used. It seems that those problems have been fixed.
However, the relative paths apparently are appended to the current working
directoy before vs accesses the file. So, with a long path, relative paths
cause it to create a combined path that is too long.
86cb17b Pass include directories with response files to GNU on Windows
9a0b9bc Optionally pass include directories with response files
6e8a67f Generate target-wide flags before individual build rules
d099546 Factor old-style -D flags out from -I flag generation
Some samples of things that got unnoticed by our nightly builds:
$ JAVA_HOME= mvn
Warning: JAVA_HOME environment variable is not set.
...
$ mvn
[INFO] Scanning for projects...
[INFO] ------------------------------------------------------------------------
[ERROR] BUILD FAILURE
...
Create platform option CMAKE_<lang>_USE_RESPONSE_FILE_FOR_INCLUDES to
enable use of response files for passing the list of include directories
to compiler command lines.
This switches the internal generation order but does not affect the
results. The new order ensures that any internal state changed by
generating target-wide flags is known when the individual rules that use
those flags are generated.
Move the GetDefineFlags call from cmLocalGenerator::GetIncludeFlags to
all call sites so that the method exclusively constructs a string of
include search path flags.
Avoid GCC warning
warning: suggest parentheses around ‘&&’ within ‘||’ [-Wparentheses]
added by commit c6a8e4c7 (The link interface of MODULE libraries is
empty, 2011-03-09).
KWSys Robot
Brad King
Bill Hoffman
Alex Neundorf
Matej Hribernik
Modestas Vainius
Johan Björk
Sean McBride
Daniel R. Gomez
Rolf Eike Beer
Zach Mullen
David Cole
Wesley Turner
Manuel Klimek
Eric NOULARD
Martin Konrad
Clinton Stimpson