Before this commit, the value of PATH at cmake time was put into the eclipse
project file. The problem with this is that this will be lost the first time
cmake is rerun from an build inside eclipse which was started without the
environment externally already set.
This patch now:
-adds the env.var to the cache if it is not already in the cache
-reuses the variable from the cache if it is in the cache, but not in the env.
-uses the variable from the cache if it contains the whole content of the
current env.var (e.g. if it is the full PATH plus the MSVC dirs)
Also store INTEL_LICENSE_FILE in the project file if an Intel compiler is used.
Alex
The Eclipse and KDevelop generators set the VERBOSE environment variable to
TRUE in the project files, because they must be able to "see" the full
command lines and errors, otherwise they can't parse the errors. But the
VERBOSE env.var. also enables cmakes own verbose output, which can be quite
long. This commit introduces an environment variable CMAKE_NO_VERBOSE, which
when set disables cmake's verbose output also when VERBOSE is set. This
env.var is now set by both the Eclipse and the KDevelop generators.
Alex
Previously we produced commit times formatted like
1261403774 -0500
which is what the Git plumbing prints. Now we use a human-readable
format like
2009-12-21 15:28:06 -0500
which is still easy to machine-parse.
Previously we escaped quotes in <UpdateCommand>...</UpdateCommand>
values using '"'. This is not necessary because the value is in
xml CDATA and not an xml attribute.
A Subversion revision is unique across the entire repository, but work
trees typically correspond only to a subdirectory below the root path.
In order to specify the version of the source code that was tested,
CTest now submits a <SVNPath> element in Update.xml that specifies the
directory of the repository that corresponds to the work tree. In
combination with the revision number this uniquely specifies the tested
source. See issue #7541.
We teach CTest to report in a <Revision> element the revision of the
source tree that was tested. This makes sense for all modern VCS tools
because they version the whole tree. We simply omit this element for
CVS because it only versions files. See issue #7541.
The SharedForward header contains a preprocessor table mapping from
platform to equivalents for ldd and LD_LIBRARY_PATH. This commit fixes
the table preprocessor directives to guarantee at most one platform.
This generalizes the commit "Fix compilation of VTK on debian/sparc".
The TestSharedForward executable and TestDynload module do not actually
link to a KWSys library, but it is nice to build them after the
libraries just like all other test binaries.
This also works around a universal binary bug in Xcode 2.x. It forgets
to create the output directory for the executable before linking it. We
avoid the problem by putting the library in the directory first.
CMake has a special case for the "make install" target when building
CMake itself. We use the just-built CMake to install itself since an
existing CMake installation cannot replace itself (at least on Windows).
We simplify the code that computes the location of the CMake binary by
taking advantage of existing generator support for target lookup. This
will make it robust to any changes in CMake's own CMakeLists.txt files
in the future.
Some fixes for including Qt frameworks.
Remove extra "QtGui.framework" so its not Contents/Frameworks/QtGui.framework/QtGui.framwork/... anymore.
Also include QtGui Resource folder, so a Cocoa/Qt based cmake-gui app works.
CTest filters the output from tools and tests to ensure that the XML
build/test result documents it generates have valid characters.
Previously we just converted all non-ASCII bytes into XML-escaped
Unicode characters of the corresponding index. This does not preserve
tool output encoded in UTF-8.
We now assume UTF-8 output from tools and implement decoding as
specified in RFC 3629. Valid characters are preserved, possibly with
XML escaping. Invalid byte sequences and characters are converted to
human-readable hex values with distinguishing tags. See issue #10003.
We re-arrange EXECUTABLE_OUTPUT_PATH settings to avoid putting utility
and test executables in the 'bin' directory of the build tree. This
makes the directory look like that in the installation tree, except that
on multi-configuration generators we still use a per-config
subdirectory.
KWSys should not set variables outside its namespace. It can honor the
EXECUTABLE_OUTPUT_PATH set by a host project, but tere is no need for it
to set a default in the host project cache.
The DumpDocumentation executable and some supporting code and tests were
completely unused by CMake. Generation of documentation is done by the
individual executables with --help* options. In this commit we simply
remove the unused code, executable, and test.
The Intel Fortran plugin to VS defines VFFortranCompilerTool as the
compiler tool. This commit fixes generated projects to use that tool
for per-source settings instead of VCCLCompilerTool. We were already
using it for target-wide compiler settings.
In order to kill process trees we need to list all processes to find
those whose parent we are killing. We implement process listing on
OpenSolaris by using "ps -ef" and parsing the resulting format:
UID PID PPID C STIME TTY TIME CMD
%*s %d %d %*[^\n]\n
In order to kill process trees we need to list all processes to find
those whose parent we are killing. We implement process listing on QNX
using "ps -Af" and parsing the resulting format:
UID PID PPID C STIME TTY TIME CMD
%*d %d %d %*[^\n]\n
We enumerate processes to identify those whose parent is being killed so
that we can recursively kill the children. Enumeration uses the
Process32(First|Next) windows API functions, which accept PROCESSENTRY32
objects to be filled. This commit corrects the declaration of the entry
structure to account for its size on 64-bit Windows.
On UNIX systems we kill a tree of processes by performing a DFS walk of
the tree. We send SIGSTOP to each process encountered, recursively
handle its children, and then send SIGKILL.
We once used the above approach in the past, but it was removed by the
commit "Do not send both SIGSTOP and SIGKILL when killing a process".
The commit was meant to work-around an OS X 10.3 bug in which the child
would not always honor SIGKILL after SIGSTOP. At the time we wrongly
assumed that the process tree remains intact after SIGKILL and before
the child is reaped. In fact the grandchildren may be re-parented to
ppid=1 even before the child is reaped, which causes the DFS walk to
miss them.
The Watcom tools do their own command-line parsing and do not accept
double-quotes. Instead we single-quote the target output name when
invoking wlink and other Watcom tools. This fixes support for spaces in
the target output directory path when it is not under the build tree.
We create CMake Policy CMP0015 to make link_directories() treat relative
paths with respect to the source tree while retaining compatibility.
This makes it consistent with include_directories() and other commands.
Changes based on patch from Alex. See issue #9697.
In CTest command-driven script mode we support starting without a source
tree. Previously the ctest_start() command would do some initialization
but could not do anything that required CTestConfig.cmake from the input
source tree. Later, ctest_update() would run CTEST_CHECKOUT_COMMAND to
create the source tree, and then re-initialize everything. This
delayed-initialization approach led to many complicated cases of which
only some worked. For example, the second initialization only worked
correctly in Nightly mode and simply failed for Experimental and
Continuous builds.
A simpler solution is to run CTEST_CHECKOUT_COMMAND during ctest_start()
and then have a single initialization path. In principle this change in
behavior could break scripts that set the checkout command after
ctest_start() but before ctest_update(). However, the convention we've
always followed has been to set all variables before ctest_start().
See issue #9450.
We make the cmCTest::Initialize method private since it is only called
from inside the class implementation. We also combine the two boolean
arguments into one since they both meant the same thing.
We suppress Intel warning 1572 because the cases where we do equality
tests are valid. Since this project does not do numerical computations
we need not worry about real instances against which this warning
protects.
-use CMAKE_EXECUTABLE_FORMAT and CMAKE_SYSTEM_NAME to decide which binary
parsers to load (ELF/Mach O/PE)
-use CMAKE_(C|CXX)_COMPILER_ID to load the respective compiler error parser
-remove EclipseToolchainType, which was a mixture between compiler and operating system
Alex
The commit "Enable loose loop constructs in KWSys" set the minimum
required CMake version to 2.4.5. This regressed the setting of CMP0003,
so we restore it in this commit.
The FundamentalType header needs to know type sizes at preprocessing
time. This commit teaches it to avoid using CHECK_TYPE_SIZE because the
macro does not work for types whose size varies across architectuers in
Mac OS X universal binaries. Fortunately the Mac compilers provide just
enough information to detect the needed type sizes during preprocessing.
We now use preprocessor macros instead of configuration tests whenever
they are available. As a side effect this reduces the number of
try-compiles needed with GCC.
See issue #9913.
This macro helps KWSys perform try-compile tests that extract 'INFO'
strings out of compiled binaries. It works for CMake 2.6 and above.
On CMake 2.4 it always returns an empty list of information values,
so this should be used only as an optimization until 2.6 is required.
In KWSys IOStream we need to detect whether 'long long' exists but we do
not need its size. We avoid using CHECK_TYPE_SIZE because it does not
work for types whose size varies across architectuers in Mac OS X
universal binaries. See issue #9913.
The list of libraries to be linked into the current target must be
specified using windows slashes to that UNC paths such as
\\server\share\somelibrary.lib
work correctly. See issue #9917.
VS 10 provides $(Configuration) and $(ConfigurationName) but only the
former is documented so we prefer it. This also makes CMAKE_CFG_INTDIR
consistent with its documentation. See issue #9916.
The commit "Fix get_filename_component ABSOLUTE mode" broke REALPATH
treatment of relative paths because it stopped storing the absolute path
in local variable 'filename'. This commit fixes the call to GetRealPath
to use the proper local variable and adds a test.
The ctest subdirs command now checks the relative path first, and if that does not exist, also checks if the given path was absolute. Thanks vodall for the patch.
Previously we silently ignored such calls and set nothing. The commit
"Initialize directory scope with closure of parent" inroduced a bad test
for the top scope. This commit fixes the test to avoid dereferencing a
null pointer, and adds a warning when the case is encountered.
This allows for a built in bzip and zip capability, so external tools
will not be needed for these packagers. The cmake -E tar xf should be
able to handle all compression types now as well.
We create per-configuration target properties to specify ARCHIVE,
LIBRARY, and RUNTIME output directories. The properties override the
generic properties for the <CONFIG> configuration:
ARCHIVE_OUTPUT_DIRECTORY -> ARCHIVE_OUTPUT_DIRECTORY_<CONFIG>
LIBRARY_OUTPUT_DIRECTORY -> LIBRARY_OUTPUT_DIRECTORY_<CONFIG>
RUNTIME_OUTPUT_DIRECTORY -> RUNTIME_OUTPUT_DIRECTORY_<CONFIG>
For multi-configuration generators, the per-configuration subdirectory
normally appended to the generic output directory is not added to the
configuration-specific property values. This allows projects to set the
exact location at which binaries will be placed for each configuration.
See issue #9163.
VS 6 forgets to create the output directory for a static library if it
differs from the intermediate files directory. We work around this VS
bug by creating a pre-link event on the library target to make the
directory.
This commit removes use of configuration-less cmTarget::GetDirectory()
by the VS 6 generator (except for compatibility with user templates).
We replace OUTPUT_DIRECTORY_<CONFIG> tokens in the templates using the
per-configuration result of cmTarget::GetDirectory(config).
The try_compile() command's COPY_FILE option should not try to actually
copy the file if it cannot be found. Some C runtime library's fopen
cannot handle an empty file name.
Previously the Xcode generator set SYMROOT to be the target output
directory. This told Xcode to put the "<proj>.build" directory in the
output path too.
This commit sets SYMROOT, CONFIGURATION_BUILD_DIR, and OBJROOT to put
intermediate files in the build directory corresponding to the source
directory that created each target. This is more consistent with the VS
IDE generators. Now only the build output files (actual targets) go to
the target output directory.
The commit "modified the if command to address bug 9123 some" changed
the if() command behavior with respect to named boolean constants. It
introduced policy CMP0012 to provide compatibility. However, it also
changed behavior with respect to numbers (like '2') but did not cover
the change with the policy. Also, the behavior it created for numbers
is confusing ('2' is false).
This commit teaches if() to recognize numbers again, and treats them
like the C language does in terms of boolean conversion. We also fix
the CMP0012 check to trigger in all cases where the result of boolean
coersion differs from that produced by CMake 2.6.4.
The if() command reports its arguments at the beginning of some error
messages. Originally it reported the un-expanded form of the arguments
because in ancient CMake versions no context information was available.
Now it is more useful to see the real arguments, which may be mentioned
in the main error message. Since full context information is now
available, users can refer back to the source if they need to see the
unexpanded form of the arguments.
For example, the code
set(regex "++")
if("x" MATCHES "${regex}")
endif()
now produces the message
if given arguments:
"x" "MATCHES" "++"
Regular expression "++" cannot compile
instead of
if given arguments
"x" MATCHES "${regex}"
Regular expression "++" cannot compile
The commit "Set version info for shared libs on OSX" taught the Xcode
generator to honor VERSION and SOVERSION properties. However, it also
set version '1.0.0' as the default when no version property is set,
which is inconsistent with the Makefiles generator. This commit fixes
the default to '0.0.0' for consistency.
See issue #9773.
The reverted commit attempted to preserve the "../" PREFIX work-around
for avoiding per-config build directories in the VS IDE generators.
However, the original reporter has concluded that a "../" PREFIX no
longer works everywhere in VS 10 project files anyway. Rather than set
OutputPath, this commit restores the $(OutDir)$(TargetName)$(TargetExt)
default.
See issue #9768.
This commit fixes the cmparseMSBuildXML.py script to generate correct
flag table entries for booleans with optional value. These flags use
two entries: the first should ignore the value and enable the option,
and the second should use the value if given. Previously the first
entry did not recognize flags with values.
In particular this fixes flags like /MP4, but the change corrects
matching of some other flags too. See issue #9771.
This commit teaches the VS 10 generator to detect the -D_UNICODE option
in preprocessor definitions and set the CharacterSet attribute to the
value 'Unicode'. This was already done for other VS IDE versions.
See issue #9769
The default $(OutDir)$(TargetName)$(TargetExt) for this value works in
most cases because we set the three properties. However, if the target
property PREFIX contains a path component (not documented but happens to
work in other VS generators) we drop it from TargetName and do not put
it in OutDir either. This commit corrects the resulting path by setting
the OutputPath property explicitly with the full path.
See issue #9768.
Intel Fortran on Mac OS X enables Fortran support in Xcode. This commit
teaches CMake to associate Fortran sources properly in Xcode projects.
See issue #9739.
The VS 10 flag table generation script did not produce correct entries
for precompiled header flags. Since precompiled header flag translation
requires multiple entries cooperating in a certain order, it is not
worth the time to make the generation script work automatically. This
commit manually adds the proper entries.
See issue #9753.
MS changed the location of the Microsoft.Cpp.$(Platform).user.props
file. This commit teaches the VS 10 generator about the new location.
See issue #9759.
Versioned UNIX libraries and executables produce multiple names for a
single target using one of
cmake -E cmake_symlink_library
cmake -E cmake_symlink_executable
to create symlinks to the real file for the extra names. However, when
cross-compiling from Windows to Linux we cannot create symlinks. This
commit teaches CMake to make copies instead of symbolic links when
running on windows. While this approach does not produce exactly what
Linux wants to see, at least the build will complete and the binary will
run on the target system. See issue #9171.
During installation of a target we generate "tweak" rules to update the
installed file (RPATH, strip, ranlib, etc.). However, some targets
install multiple files, such as the versioned names of a shared library.
Previously the extra files for a target have always been symbolic links,
but for cross-compiling from Windows to UNIX they may need to be copies.
This commit teaches the generated install scripts to loop over all files
installed for the target to apply tweaks to those that are not symlinks.
See issue #9171.
In cmInstallTargetGenerator::GenerateScriptForConfig we were computing
the full 'from' paths for all target files to be installed, but only
computing a 'to' path for the "main" target file. This commit teaches
the method to compute both 'from' and 'to' paths for every target file
to be installed. The result is cleaner, easier to follow, and will
allow installation tweaks to be added later on all target files.
We factor the implementation of
cmake -E cmake_symlink_library
cmake -E cmake_symlink_executable
out of cmake::ExecuteCMakeCommand into methods
cmake::SymlinkLibrary
cmake::SymlinkExecutable
plus a helper method cmake::SymlinkInternal.
The cmInstallTargetGenerator methods AddStripRule and AddRanlibRule do
not need the target type argument. They can simply use the type of the
target for which the generator instance was created.
The CMAKE_OSX_ARCHITECTURES variable works only as a global setting.
This commit defines target properties
OSX_ARCHITECTURES
OSX_ARCHITECTURES_<CONFIG>
to specify OS X architectures on a per-target and per-configuration
basis. See issue #8725.
Both generators use the CMAKE_EDIT_COMMAND variable to determine whether
they should add the edit_cache target, i.e. they don't add it if it's
ccmake, since this does not work inside the output log view of
Eclipse/Codeblocks. But instead of requiring the variable to be set they now
check it for 0 and handle this appropriately. This should help Dave getting
some testing for them :-)
Alex
In VS 8 and greater this commit implements
add_dependencies(myexe mylib) # depend without linking
by adding the
LinkLibraryDependencies="false"
option to project files. Previously the above code would cause myexe to
link to mylib in VS 8 and greater. This option prevents dependencies
specified only in the solution from being linked. We already specify
the real link library dependencies in the project files, and any project
depending on this to link would not have worked in Makefile generators.
We were already avoiding this problem in VS 7.1 and below by inserting
intermediate mylib_UTILITY targets. It was more important for those
versions because if a static library depended on another library the
librarian would copy the dependees into the depender! This is no longer
the case with VS 8 and above so we do not need that workaround.
See issue #9732.
In Visual Studio project files we pass compiler flags to the whole
target based on the linker language, which works for MS tools and
combinations of C and C++. For the Intel Fortran plugin though the
generated .vfproj files should never contain C or C++ options.
We generate .vfproj files only for targets consisting only of Fortran
code. Now that the linker language is computed transitively through
linking it is possible that the linker language is C++ for an otherwise
Fortran-only project. This commit forces Fortran as the linker language
for the purpose of specifying target-wide flags in .vfproj files.
See issue #9719.
The commit "Avoid non-root copies of root-only targets" moved the check
for root-only targets into cmGlobalGenerator::GetTargetSets to avoid
adding multiple ALL_BUILD targets to the "original" target set. This
approach did not work for ZERO_CHECK targets though because those are
pulled in by dependency analysis.
Instead we eliminate duplicate ZERO_CHECK targets altogether and refer
to a single one from all solution files. This cleans up VS 10 project
file references to ZERO_CHECK targets anyway.
We revert commit "Create CMake Policy CMP0015 to fix set(CACHE)" because
the NEW behavior of the policy breaks a valid use case:
# CMakeLists.txt
option(BUILD_SHARED_LIBS "..." ON)
add_library(mylib ...)
set(BUILD_SHARED_LIBS OFF) # we want only mylib to be shared
add_subdirectory(ThirdParty)
# ThirdParty/CMakeLists.txt
option(BUILD_SHARED_LIBS "..." ON)
# uh, oh, with NEW behavior this dir uses shared libs!!!
We'll re-introduce the policy later with a different change in behavior
to resolve the motivating case, which was more subtle but less common.
See issue #9008.
The commit "Really fix color check for dependency scanning" disabled
color unless "make COLOR=ON" is specified. This restores the previous
default behavior when CMAKE_COLOR_MAKEFILE is ON while retaining the
previous commit's fix. See issue #9680.
The commit "Fix color check for dependency scanning" was meant to
disable color if CMAKE_COLOR_MAKEFILE was off. It did remove use of the
activation option '--color' but it failed to make the default false when
the option was missing. This commit corrects that. See issue #9680.
The commit "add support for borland run time flag for shared builds"
started using the value of CMAKE_SHARED_LIBRARY_CXX_FLAGS to link
executables because Borland requires some flags both at compile and link
time. This change ended up propagating all the way to the current
Makefile generators and the behavior applies on all platforms.
In general it is incorrect to use these flags to link executables. The
commit "Split Borland compiler information files" re-wrote Borland
support to work without this behavior, so we remove it in this commit.
Patch from Ben Hutchings. See issue #9659.
This commit re-writes Borland compiler build rules. We split the rules
into modern <os>-<id>-<lang> information modules but share a common
macro between languages to avoid duplication.
We also address a bug in the previous rules that would build some target
types against the static Borland runtime and others against the shared
Borland runtime in one build tree. Now we always use the shared runtime
as is the default in the rules for MS tools.
When <pkg>_DIR is set to an incorrect version we search again and store
the result in the variable, even if it is <pkg>_DIR-NOTFOUND.
There was a bug in the case when the new search does not find anything
and the old value came from a cache entry with UNINITALIZED type. The
command used to try to load a package configuration file from the last
place searched, and would leave the old wrong value in the entry. This
commit fixes the behavior to avoid trying to load a missing file and to
set the value to <pkg>_DIR-NOTFOUND as expected.
In cmMakefile::AddCacheDefinition we collapse paths specified in PATH or
FILEPATH cache entries originally specified on the command line with
UNINITALIZED type. This commit fixes the logic to avoid collapsing
<var>-NOTFOUND and other false values. The change allows other CMake
code to force a NOTFOUND value on an entry with UNINITALIZED type.
The commit "Support more special characters in file(STRINGS)" added code
using a 'char' literal as an array index. Some compilers warn about
this because char might be a signed type, leading to negative indices.
We replace the literal with an integer to avoid the warning.
The commits "Teach Fortran compiler identification about the Portland
Group compiler" and "Fix previous change to file(STRINGS) command"
taught file(STRINGS) to recognize the form-feed '\f' character as part
of string literals. The Portland Group Fortran compiler also puts 0x14
bytes at the end of string literals in some cases. We generalize the
previous solution and add the new character in this commit.
Scanning the dependencies for kdelibs/khtml/ (when all files are scanned) is
now down to 4.6 s from 6.3 s before this change (without the
headerLocationCache it takes about 14 s here).
It doesn't really make sense to include the complete include path as part
of the key for the map, since the include path will be the same for
all files in a project, so it doesn't add anything.
Alex
In cmGlobalGenerator::GetTargetSets we collect targets from all local
generators in a tree or subtree corresponding to a project() command.
Some targets, such as ALL_BUILD, are duplicated in each subdirectory
with a project() command. For such targets we should keep only the copy
for the top-most (root) local generator.
Previously this filtering was done in each VS IDE generator, but it is
easier to do it in one place when the targets are first encountered.
This also fixes bad ALL_BUILD dependencies generated for VS 7.0 because
the cmGlobalVisualStudio7Generator::WriteTargetDepends method was not
filtering out duplicates. Now we avoid duplicates from the start.
The commit "Target copy ctor should copy internal state" created a new
cmTargetInternals constructor but failed to initialize a POD member that
the original constructor initializes. This commit fixes it.
Ideally we should never copy cmTarget instances, but it is a pain to
remove current uses of it. The pimplized portion of cmTarget has mostly
members that cache results, but some are part of the object state.
These should be copied in the copy ctor instead of re-initialized.
The Encoding key is now deprecated by the FreeDesktop standard and all
strings are required to be encoded in UTF-8. This desktop entry
explicitly specified an Encoding of UTF-8, which is harmless but no
longer necessary. See
http://standards.freedesktop.org/desktop-entry-spec/1.0/apc.html
for details. Patch from Modestas Vainius. See issue #9659.
In cmTarget we compute the link implementation, link interface, and link
closure structures on-demand and cache the results. This commit teaches
cmTarget to invalidate results after a LINK_INTERFACE_* property changes
or a new link library is added. We also clear the results at the end of
the Configure step to ensure the Generate step uses up-to-date results.
In cmTarget::SetProperty and cmTarget::AppendProperty we check whether
changing the property invalidates cached information. The check was
duplicated in the two methods, so this commit moves the check into a
helper method called from both.
This method is called during ConfigureFinalPass on every target. It
gives each target a chance to do some final processing after it is known
that no more commands will affect it. Currently we just call the old
AnalyzeLibDependencies that used to be called directly.
This commit re-words the warning message produced for CMP0012 to avoid
the word 'you' since often the person reading the message is not the
author of the code. We also add an example of the bad OLD behavior to
the policy documentation.
These policies were originally developed during the 2.7.x series and
intended for 2.6.5. There was never a 2.6.5 release, so we should refer
to 2.8.0 instead.
This commit creates target and directory properties to enable the Intel
interprocedural optimization support on Linux. Enabling it adds the
compiler option '-ipo' and uses 'xiar' to create archives.
See issue #9615.
This creates cmTarget::GetFeature and cmMakefile::GetFeature methods to
query "build feature" properties. These methods handle local-to-global
scope and per-configuration property lookup. Specific build features
will be defined later.
We create cmMakefileTargetGenerator::AddFeatureFlags to consolidate
addition of language flags. Currently it just adds the flags from
generic per-language flag variables (AddLanguageFlags).
There is confusion whether the file "currently being processed" inside a
function or macro is the file containing the definition or not. This
commit explicitly describes the behavior. See issue #9646.
In VS 6, 7, and 7.1 solutions we implement
add_dependencies(myexe mylib) # depend without linking
by creating an intermediate mylib_UTILITY target with dependencies
myexe -> mylib_UTILITY -> mylib
to avoid linking myexe to mylib. Previously these extra targets were
only added to the solution files in an ancestor directory of that
defining mylib. For example, in the project:
# CMakeLists.txt
project(TOP)
add_subdirectory(A)
add_subdirectory(b)
# A/CMakeLists.txt
add_library(mylib ...)
# B/CMakeLists.txt
project(B)
add_executable(myexe ...)
add_dependencies(myexe mylib)
the solution for TOP would have mylib_UTILITY but the solution for B
would not even though it pulls in mylib through the dependency. This
commit fixes solutions generated in other directories so that any
solution that has mylib will get mylib_UTILITY also.
See issue #9568.
This commit cleans up the declaration, definition, and invocations of
the GetTargetSets method and related code. There is no change in
function except to make the method virtual.
This teaches the VS 6 IDE generator to use the transitive closure of
target dependencies. This re-uses much of the implementation already
done for the other VS>6 generators. See issue #8223 and issue #9568.
We move cmGlobalVisualStudio7Generator::OrderedTargetDependSet up to
cmGlobalVisualStudioGenerator so it can be re-used for other VS
versions. See issue #9568.
Some find-modules use get_filename_component() to expand registry
values. We need to look in both the 32-bit and 64-bit registry views
when expanding values. We prefer the one that the target application
would see. See issue #8792.
When building through NMake with VS 6, the module definition file must
be passed without spaces in the path. This is because 'cl -link' does
not escape the spaces when passing the value on to the linker.
Since Haiku does not have /usr (and therefore /usr/local), this commit
changes the default install prefix to the equivalent directory of
/boot/common.
See issue #9607.
We recognize .def source files and map them to the /DEF:<file> option in
the MSVC tools. Previously this worked only for shared libraries. This
commit cleans up the implementation and makes it work for executables
too. See issue #9613.
When constructing cmVisualStudioGeneratorOptions to parse options for
tools 'link' and 'lib' the tool type is now Linker, not Compiler. This
tells it not to recognize flags starting in '/D' as preprocessor macros,
such as the '/DEF:<file>' linker option. See issue #9613.
The commit "cmparseMSBuildXML should output StringProperty values too"
fixed the script that generated
Source/cmVS10CLFlagTable.h
Source/cmVS10LibFlagTable.h
Source/cmVS10LinkFlagTable.h
This commit updates the files with the new output.
Some older STL implementations invoke the comparison functor as a const
object, so the function call operator must be 'const' qualified. This
fixes the commit "Fix support for OLD behavior of policy CMP0002" to
compile on older STLs.
The commit "Cleanup make progress rule generation code" introduced a map
from target name to the progress.make file location. Policy CMP0002's
OLD behavior allows duplicate target names in different directories, so
only one ends up with a progress.make file. This commit fixes the map
to order by target name first and build directory second, restoring
support for duplicate target names.
This converts the CMake license to a pure 3-clause OSI-approved BSD
License. We drop the previous license clause requiring modified
versions to be plainly marked. We also update the CMake copyright to
cover the full development time range.
This converts the KWSys license to a pure 3-clause OSI-approved BSD
License. We drop the previous license clause requiring modified
versions to be plainly marked. We also update the KWSys copyright to
cover the full development time range.
This commit adds KWSys configuration option KWSYS_INSTALL_DOC_DIR to
specify the directory for installation of documentation. We use it to
put the KWSys Copyright.txt file at the location
${KWSYS_INSTALL_DOC_DIR}/${KWSYS_NAMESPACE}/Copyright.txt
in the project installation tree. This helps containing projects meet
the license requirement to distribute the copyright and license with
binary forms.
The commit "Generate proper Intel Fortran project version" replaced the
hard-coded 9.10 value with a runtime registry lookup of the real
version. Version 10.1 actually uses project file format 9.10, so this
commit switches it back for that version. See issue #9169.
Applications on Haiku are discouraged from storing their data in $HOME.
This teaches export(PACKAGE) and find_package() to use the BeAPI on
Haiku to store the package registry instead of using ~/.cmake/packages.
See issue #9603.
Set the working_dir entry in the codeblocks project file of executable
targets to the directory where the executable is created. Then when running
CB, executing the target (not building), will run it from that directory.
Alex
CMake policies CMP0014 and CMP0015 were implemented in the development
series version 2.7.x but will be first released in 2.8.0. Now that the
development version number is higher than that (2.9.x) we can update
their version of introduction to the actual release number.
In CMake Policy documentation we specify the default behavior for the
current version of CMake. This commit fixes that version by reporting
the full version number instead of just major and minor.
The commit "Fix KWSys SystemTools build on cygwin with -mwin32" tried to
restore the state of the _WIN32 definition that was broken by the commit
"Optimize KWSys SystemTools::FileExists on Windows". It did so for the
case of building with -mwin32 on cygwin, but since including <windows.h>
defines _WIN32, it failed for the case of not using -mwin32.
This commit restores the state of _WIN32 in all cases by undefining it
after including <windows.h> if it was not defined beforehand.
Xcode 1.5 writes helper scripts at the projectDirPath location for
targets that do not set SYMROOT. We now add SYMROOT to custom targets
so that all targets set it. This prevents Xcode 1.5 from touching the
source directory now that we always set projectDirPath.
See issue #8481.
Now only the dependencies for the file where the dependencies actually may
have changed are rescanned, before that this was done for all source files
even if only one source file had changed.
This reduces e.g. on my machine the time for scanning the dependencies
of kdelibs/khtml/ when only one file (khtml_global.cpp) has changed from
around 7.5 seconds to 1.2 seconds.
The tests succeed, it does what I expected it to do on kdelibs, and Brad
also reviewed the patch, so I think it should be ok.
Alex
Commit "Optimize KWSys SystemTools::FileExists on Windows" accidentally
added "#undef _WIN32" when including <windows.h> on cygwin, which breaks
builds using the -mwin32 flag. This commit removes that line and fixes
the real error it was intended to avoid.
Xcode project source file references need to always be relative to the
top of the source tree in order for SCM and debug symbols to work right.
We must even allow the relative paths to cross outside of the top source
or build directories.
For subdirectory project() command Xcode projects we use the source
directory containing the project() command as the top. Relative paths
are generated accordingly for each subproject.
See issue #8481.
In cmLocalGenerator::ConvertToRelativePath we normally convert to
relative path only if the local and remote paths both lie inside the
source tree or both lie inside the build tree. This commit adds an
optional 'force' argument to allow conversion even when this rule is
violated.
If CMakeDirectoryInformation.cmake is newer than depend.internal the include
directories may have changed, so dependencies need to be scanned again.
Ok by Brad.
Alex
We optimize this method by using the GetFileAttributesExA native Windows
API to check for file existence when possible. For real Windows builds
we always use it. For Cygwin we use cygwin_conv_to_win32_path to get a
native Windows path if possible and otherwise fall back to 'access'.
Cygwin-to-Windows path conversion and cache by Wojciech Migda.
See issue #8826.
When reading the depend.internal file, check only once for every depender
whether it exists, instead of repeatedly in a loop for each dependee. Within
that function it can only change of the depender is removed. This is taken
care of.
This reduces the number of access() calls in kdelibs/khtml from 180000 to
90000 (i.e. 50%), and reduces the time for that (without the actual
scanning) from 0.3 s to 0.21 s on my system.
Alex
This subclass of cmGlobalXCodeGenerator only provided two virtual method
overrides, and it made construction of the Xcode generator instance
complicated. This commit removes it and replaces the virtual methods
with tests of the Xcode version. The change removes duplicate code.
Previously we checked for this flag by parsing the version number of GCC
out of 'gcc --version', but this is not reliable because the format can
vary greatly. Now we run 'gcc -v --help' and look for '-isysroot' in
the list of options.
We also now store the result on a per-language basis in the per-compiler
info file "CMake<LANG>Compiler.cmake". This is necessary to make it
accessible from try-compile projects so that they generate correctly.
Some vendor tools convert PDB file names given on the command line to
lower-case before creating the file. When CMake places a mixed-case PDB
file name into the build system, the file does not exist the first time
and it is written with mixed case. After the first build though the
native tool has created a lower-case version of the file. If CMake does
CollapseFullPath again, the file exists so the actual-case lookup gets
the lower-case name. This causes the build files to change so the
project rebuilds.
The solution is to avoid calling CollapseFullPath for files generated by
the build. In the case of PDB files we already construct them from
paths that have been collapsed, so we can just skip the call altogether.
See issue #9350.
In cmMakefile::AddSubDirectory we were checking for addition of the same
source directory multiple times. However, the check code was incorrect
because it compared pointers instetad of pointed-to strings. Since the
check was written, a better check was added right after it to enforce
unique binary directories (in which case duplicate sources are fine).
This commit simply removes the old-style check code.
Before this change all targets were displayed in the top level directory of
the project. Now the targets are displayed in the correct directory.
The targets "clean" and "all" are now created in every subdirectory.
Also now the targets for just compiling one file, preprocessing one file,
assembling one file are are created for Eclipse.
Additionally all targets get a prefix now in eclipse, so that they are
sorted in a way which makes sense (global targets first, then executable and
libraries, then object files, then preprocessed, then assembly). Also
this prefix gives the user a hint what the target is, i.e. whether it's a
library or an executable or something else.
Alex
This commit teaches configure_file how to handle directories for input
and output. It is an error if the input is a directory. If the output
is a directory we put the configured copy of the input file in it with
the same name. See issue #9537.
The configure_file() command now converts relative output paths to full
paths using the current binary directory. Input relative paths were
already converted using the current source directory, but this behavior
was not previously documented.
Now gcc is queried also for the builtin definitions, and they are then added
to the .cproject file. This should make the preprocessor highlighting in
eclipse work better (#9272)
Patch mostly from Miguel.
Alex
The Intel Visual Fortran compiler plugin for MS Visual Studio may be one
of several versions of the Intel compiler. This commit teaches CMake to
detect the plugin version and set the version number in .vfproj files.
See issue #9169.
This method returns the registry key
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\VisualStudio\<version>
A protected GetIDEVersion method retrieves the version-specific part of
the key name.
The commit "Improve dynamic variable scope implementation" optimized
function scopes using an efficient parent scope pointer. However, the
parent scope used to initialize a new directory might not exist later
(like add_subdirectory called inside a function of the parent scope).
This caused CMake to crash when following the dangling pointer to the
original parent scope.
We fix the problem in this commit by always computing the closure of the
parent scope at directory initialization time so that no parent scope
pointer is needed. See issue #9538.
The cmProcess::Buffer class derives from std::vector. We were using
local variable 'data' in the GetLine method but this name shadowed a
member of vector with GNU. This renames it to 'text'.
When we clear the buffer for an output pipe after returning the last
partial line (without a newline) we need to set the partial line range
to empty. Otherwise the buffer object is left in an inconsistent state.
This commit fixes cmCTestRunTest and cmProcess to more efficiently
handle child output. We now use the buffer for each child output pipe
to hold at most a partial line plus one new block of data at a time.
All complete lines are scanned in-place, and then only the partial line
at the end of the buffer is moved back to the beginning before appending
new data.
We also simplify the cmProcess interface by making GetNextOutputLine the
only method that needs to be called while the process is running. This
simplifies cmCTestRunTest so that CheckOutput can be called until it
returns false when the process is done.
The commit "Remove barely-used cmMakefile::AddCacheDefinition" removed
all but one use of the cmCacheManager method 'bool' overload. This
commit removes the other use and the entire method, thus reducing code
duplication.
The commit "Remove barely-used cmMakefile::AddCacheDefinition" broke
option() calls that pass a non-boolean default value. We restore the
old behavior by always coercing the value to 'ON' or 'OFF'.
The GNU compiler warns about possible operator precedence mistakes and
asks for explicit parentheses (-Wparentheses). We add the parentheses
to silence the warning. This also fixes one real logic error in the
find_package() implementation by correcting expression evaluation order.
The set(CACHE) and option() commands should always expose the cache
value. Previously we failed to expose the value when it was already set
if a local variable definition hid it. When set to NEW, this policy
tells the commands to always remove the local variable definition to
expose the cache value. See issue #9008.
The boolean overload of this method was used only to implement option().
We re-implement option() in terms of the main method and removes the
now-unused signature. This removes some duplicate code that had already
fallen behind on changes (it was not removing the local definition
instead of setting it).
Basically the code is now a copy of the one from the CodeBlocks generator,
maybe this could move into a common helper function somewhere:
-only insert GLOBAL targets from the toplevel directory
-don't insert the edit_cache target if it calls ccmake, since this doesn't
work in the output tab of Eclipse
-add the /fast targets
Alex
Visual Studio 10 uses MSBuild to drive the build. Custom commands
appear in MSBuild files inside CustomBuild elements, which appear inside
ItemGroup elements. The Outputs and AdditionalInputs elements of each
CustomBuild element are evaluated according to timestamps on disk.
MSBuild does not use inputs/outputs to order CustomBuild steps within a
single ItemGroup or across multiple ItemGroup elements. Instead we must
put only unrelated CustomBuild elements in a single ItemGroup and order
the item groups from top to bottom using a topological order of the
custom command dependency graph.
This fixes CustomCommand and ExternalProject test failures, so we remove
the expectation of these failures.
In each target we trace dependencies among custom commands to pull in
all source files and build rules necessary to complete the target. This
commit teaches cmTarget to save the inter-source dependencies found
during its analysis. Later this can be used by generators that need to
topologically order custom command rules.
Until now the VS 10 generator did no Windows command-line escaping and
just did XML escapes. This commit teaches the generator to use the same
command-line escape addition code used by other generators. The script
construction method cmLocalVisualStudioGenerator::ConstructScript need
not do XML escapes. Each VS generator version adds the XML escapes
necessary for that version.
It seems that
while(i=file.get(), file)
iterates one character too much on HP-UX, let's see whether
while(file.get(c))
works, at least this is given as example on http://h30097.www3.hp.com/cplus/ifstream_3c__std.htm
Alex
-add all global targets from CMAKE_BINARY_DIR to the menu, but not from the subdirs
-add all utility targets to the menu, except the Nightly/Experimental/Continuous-"sub"targets as e.
Alex
In cmTarget we trace the dependencies of source files in the target to
bring in all custom commands needed to generate them. We clean up the
implementation to use simpler logic and better method names. The new
approach is based on the observation that a source file is actually an
input (dependency) of the rule that it runs (compiler or custom) even in
the case that it is generated (another .rule file has the rule to
generate it).
This teaches cmTarget to use a set of cmSourceFile pointers to guarantee
unique insertion of source files in a target. The order of insertion is
still preserved in the SourceFiles vector.
When CMake is invoked by the VS IDE re-run rule we compute whether or
not CMake really needs to re-run based on some timestamp helper files.
Previously we assumed that if the main generate.stamp file exists then
VS has correctly detected that the file is out of date. However, this
assumption is too aggressive and re-runs CMake unnecessarily sometimes.
This commit removes the assumption and always checks timestamps itself.
The change breaks the explicit user re-run request (R-click -> Compile)
but only in cases when the build system is already up to date.
The VS generators use a ZERO_CHECK target on which all other targets
depend to check whether CMake needs to re-run. This commit simplifies
the addition of a dependency on the target to all other targets.
We also move addition of dependencies to the beginning of the Generate
step. This allows the dependency on ZERO_CHECK to be included in the
global inter-target dependency analysis.
KWSys tries not to force anything on source files that include its
headers, but Borland warning 8027 leaves us no choice when we want to
have inline function definitions. This commit disables the warning for
the RegularExpression header and any file that includes it.
Until now CMake accidentally accepted add_subdirectory() and subdirs()
calls referring to directories that do not contain a CMakeLists.txt
file. We introduce CMake Policy CMP0014 to make this case an error.
This method tells the cmMakefile to read the input CMakeLists.txt file.
We factor out the call into a ReadInputFile method so it can be extended
without polluting the Configure method.
Much of the code in this method was dedicated to computing ObjectMaxPath
after configuring the directory. We move this last step into its own
ComputeObjectMaxPath method for better organization.
The cmLocalGenerator::Configure method sets its cmLocalGenerator
instance as the global generator's current local generator during
configuration. This commit refactors management of the current local
generator to use an automatic variable. This will allow early returns
from the method.
CMake Makefile generators silently ignore missing CMakeLists.txt files
and just treat the source directory as if it had an empty input file.
This will be addressed with a new CMake Policy, but for now we make the
VS generator consistent with the Makefile generator behavior. The VS
generator will need to handle the OLD behavior of the policy anyway.
The cmGlobalGenerator::AddTargetDepends method traces the dependencies
of targets recursively to collect the complete set of targets needed for
a given project (for VS .sln files). This commit teaches the method to
avoid tracing its dependencies more than once. Otherwise the code does
an all-paths walk needlessly.
We define the export(PACKAGE) command mode to store the location of the
build tree in the user package registry. This will help find_package
locate the package in the build tree. It simplies user workflow for
manually building a series of dependent projects.
A common user workflow is to build a series of dependent projects in
order. Each project locates its dependencies with find_package. We
introduce a "user package registry" to help find_package locate packages
built in non-standard search locations.
The registry explicitly stores locations of build trees providing
instances of a given package. There is no defined order among the
locations specified. These locations should provide package
configuration files (<package>-config.cmake) and package version files
(<package>-config-version.cmake) so that find_package will recognize the
packages and test version numbers.
We create target property "LINK_INTERFACE_MULTIPLICITY" and a per-config
version "LINK_INTERFACE_MULTIPLICITY_<CONFIG>". It sets the number of
times a linker should scan through a mutually dependent group of static
libraries. The largest value of this property on any target in the
group is used. This will help projects link even for extreme cases of
cyclic inter-target dependencies.
The 'binary' openmode does not exist on all compilers. We define macro
<kwsys>_ios_binary, where <kwsys> is the KWSys namespace, to refer to
std::ios::binary if it exists and 0 otherwise. Sample usage:
kwsys_ios::ifstream fin(fn, kwsys_ios::ios::in | kwsys_ios_binary);
In cmComputeLinkInformation::Compute we add implicit link information
from languages other than the linker language to the end of the link
line. This factors out that code into separate methods to improve
readability and organization.
CTest runs 'svn status' to identify modified and conflicting files in
the working directory. This commit fixes the interpretation of the 'X'
status, which corresponds to svn eXternals. This status should be
ignored rather than treated as a local modification.
This introduces a new syntax called "generator expressions" to the test
COMMAND option of the add_test(NAME) command mode. These expressions
have a syntax like $<TARGET_FILE:mytarget> and are evaluated during
build system generation. This syntax allows per-configuration target
output files to be referenced in test commands and arguments.
We creates methods IsDLLPlatform() and HasImportLibrary(). The former
returns true on Windows. The latter returns whether the target has a
DLL import library. It is true on Windows for shared libraries and
executables with exports.
We teach cmTestGenerator::GenerateScriptConfigs to use the general
cmLocalGenerator::EscapeForCMake method to write escaped test property
values into test scripts. This eliminates the previous hand-coded
escaping implementation.
The find_package commands looks at the "WhereBuild" registry entries
created by CMakeSetup and cmake-gui hoping that the project was recently
built. CMakeSetup created WhereBuild1..WhereBuild10 but cmake-gui
creates WhereBuild0-WhereBuild9.
This fixes find_package to look at WhereBuild0 so that the most recently
configured project can be found. It is important in the case that the
package to be found was the last one configured in cmake-gui but the
current project that is finding it is configured from the command line.
The try_compile command builds the cmTryCompileExec executable using the
cmTryCompileExec/fast target with Makefile generators in order to save
time since dependencies are not needed. However, in project mode the
command builds an entire source tree that may have dependencies.
Therefore we can use the /fast target approach only in one-source mode.
When building an entire source tree with try_compile instead of just a
single source file, it is possible that the CMakeLists.txt file in the
try-compiled project invokes try_compile. This commit fixes propagation
of language-initialization results from the outer-most project into any
number of try-compile levels.
KWSys Robot
David Cole
Alexander Neundorf
Zach Mullen
Brad King
Clinton Stimpson
Bill Hoffman
Luis Ibanez
Zack Galbreath
Ken Martin
Dave Partyka