This patch solves the problem of installing both: Device and Simulator
libraries on iOS. Before only one of them was installed.
If the IOS_INSTALL_COMBINED property is set on a target, a
special install hook will be activated which builds the corresponding
target and combines both at the install location.
The original patch was contributed by Ruslan Baratov, and polished by
Gregor Jasny.
Create a new dialog window for the cmake-gui that provides controls for
setting the state of suppression of developer and deprecated warning
messages. This replaces the previous single checkbox for setting the
state of suppression of developer warnings.
Added a note for the new functionality to the release notes.
- Add TIFF::TIFF imported target
- Document imported target
- Add testcase to test the standard variables and the imported
target
Also:
- Add TIFF_INCLUDE_DIRS to match common practice
- Update documentation generally, including documenting
TIFF_INCLUDE_DIRS
If multiple input files are provided then the destination must be a
directory. If only one input file is provided then destination may be
either a file or directory.
Explicitly enable deprecated warnings by default, via the
cmake::GetSuppressDeprecatedWarnings method, which signals
suppression is turned off unless the CMake variables are set
as required.
Add tests and update the documentation for the new
functionality.
Change the '-Wdev' and '-Wno-dev' options to also enable and
suppress the deprecated warnings output, via the
'CMAKE_WARN_DEPRECATED' CMake variable, by default. This
action does not happen if the user specifies a deprecated
warning message option.
Add tests and update the documentation for the new
functionality.
Add 'deprecated' warning options type, to allow setting
CMAKE_WARN_DEPRECATED via the -W '-Wdeprecated' and
'-Wno-deprecated' options.
Add tests for new options and updated documentation.
The -T parameter to CMake may now be specified through cmake-gui via a
new text field in the first-time configure wizard (below the generator
chooser).
The generator factories specify whether or not they support toolsets.
This information is propagated to the Qt code and used to determine if
the selected generator should also display the optional Toolset widgets.
04a2a923 Help: Add notes for topic 'cpack-deb-new-component-vars'
57672e72 CPackDeb: CPACK_DEBIAN_PACKAGE_NAME documentation improvement
a45a4b2d CPackDeb: set package control field per component
a60574f1 CPackDeb: set priority control field per component
24012e3c CPackDeb: additional CPACK_DEBIAN_PACKAGE_SECTION documentation
47182ab8 CPackDeb: set section control field per component
Also add GTK2_TARGETS variable containing all imported targets.
Previously, the GTK2_LIBRARIES variable was filled with the paths to the
libraries, and only the GTK2_XXX_LIBRARY variables contained the imported
targets.
Multiple languages for SLAs and the SLA UI can be added via the CPack
variables CPACK_DMG_SLA_DIR and CPACK_DMG_SLA_LANGUAGES. For each
language defined in the languages variable, CPack will search for
<language>.menu.txt and <language>.license.txt in CPACK_DMG_SLA_DIR.
If the sla directory variable is not defined, the old behaviour using
CPACK_RESOURCE_FILE_LICENSE is retained.
This module was added by commit v2.6.0~1489 (...supporting embedded
compilers..., 2007-07-02) to avoid needing to build the compiler id
detection source on toolchains that need special flags or linker files
to produce executables. Since then CMake has learned other ways to
identify such compilers (e.g. passing vendor-specific version flags and
checking for vendor-specific banners in the output). Furthermore, CMake
now detects a lot more than just the compiler id during language
initialization in order to support things like <LANG>_STANDARD and
COMPILE_FEATURES. Therefore CMakeForceCompiler is no longer a viable
approach because it skips such detection.
One remaining challenge to support toolchains that require special
linker files is to build the test for a working compiler, compiler ABI
detection binary, and other try_compile cases. This will have to be
worked out as such cases are encountered.
The change made by commit v3.4.0-rc1~342^2 (Factor an <INCLUDES>
placeholder out of <FLAGS> in rule variables, 2015-07-13) affects an
internal interface. Since it is commonly used by projects anyway, add a
release note covering the change in placeholders.
Starting with sigc++ 2.5.1, c++11 must be enabled in order to use
sigc++. The GTK2::sigc++ imported target will automatically enable the
required build flags in order to build with the version found on the
system.
Move all development release notes into a new version-specific document:
tail -q -n +3 Help/release/dev/* > Help/release/3.4.rst
git rm -- Help/release/dev/*
except the sample topic:
git checkout HEAD -- Help/release/dev/0-sample-topic.rst
Reference the new document from the release notes index document.
Add a title and intro sentence to the new document by hand.
Teach the VS 2015 generator to produce a WindowsTargetPlatformVersion
value. Use the CMAKE_SYSTEM_VERSION to specify the version and if not
set choose a default based on available SDKs. Activate this behavior
when targeting Windows 10.
Co-Author: Brad King <brad.king@kitware.com>
Some commands on Windows do not understand forward slash paths and
require backslashes. In order to help projects generate shell
invocations of such commands, provide a generator expression to convert
paths to the shell-preferred path format for the current generator.
This will allow custom commands to generate paths the same way CMake
does for compiler command invocations.
The changes in commit 47b060ae (CPackDeb: allow empty directories in
component packages, 2015-09-21), commit b58de9fe (CPack: allow packaging
of empty directories, 2015-09-21), and commit b761e90d (CPack: remove
accidental changes, 2015-09-22) regressed packaging of CMake itself.
Revert the changes until they can be revised and rebased on other
changes that make additional fixes.
fff9434d FindThreads: officially announce it works with only C++ enabled
66db914a FindThreads: fix printing a pointer value in test code
0b38424c FindThreads: make the call to try_run() work also if only C++ is enabled
9924a212 FindThreads: replace CheckIncludeFiles by CheckIncludeFile
a27bc0cc Check(Function|Library|Symbol)Exists: make it work if only C++ is enabled
7279f293 FindThreads: add simple testcase
The changes in commit c96fe0b4 (cmake: Add -W options to control
deprecation warnings and errors, 2015-07-28) fail to account for
-Wdev warnings produced by places in CMake other than message().
This causes a regression in which -Wno-dev fails to suppress such
warnings. Revert the feature until it can be revised accordingly.
If variable is set to TRUE, values of all variables prefixed with CPACK_
will be escaped so special characters such as dolar sign, quotes or
foreward slash will not be lost. By default variable is treated as set
to FALSE for back compatibility.
The cpack_encode_variables macro is changed into a function to remove
scope pollution. There should be no other effects.
Add ctest command-line options:
--test-output-size-passed <n>
--test-output-size-failed <n>
to set the amount of test output to store in Test.xml as a command-line
dashboard client.
e134e53b Add support for *.manifest source files with MSVC tools
da00be63 MSVC: Rewrite manifest file handling with Makefile and Ninja
d488b5c9 Ninja: Always add OBJECT_DIR variable to link rules
6d620f5a VS: Add manifest tool settings to VS 8 and 9 project files
7c5b6ed5 ExternalProject: Use "git stash save --all" only if supported (#15722)
b04c3815 ExternalProject: Use GIT_VERSION_STRING instead of custom method
becb14c9 CPack/DEB: test preserve extra config file permissions
7044e8ee CPackDeb: use of libarchive and removal of fakeroot
415405a3 cmArchiveWrite: control user/group, permissions and recursive file adding
4f2ff601 Tests: Make RunCMake.CPack error messages more readable
81b748ae cmGeneratedFileStream: Fix spelling in comment
Classify .manifest sources separately, add dependencies on them, and
pass them to the MS manifest tool to merge with linker-generated
manifest files.
Inspired-by: Gilles Khouzam <gillesk@microsoft.com>
The calls to find_program now use NAMES_PER_DIR so that the first executable
(e.g. h5pcc) appearing on their PATH will get chosen. The HDF5_PREFER_PARALLEL
variable swaps the search order when it is set to true in the event that a
directory being search contains both h5cc and h5pcc.
Mangling is prevented by using a function instead of a macro for setting
default value of some CPack variables. Function is meant for internal use
in CPack.cmake only.
Old macro is deprecated but kept for backwards compatibility - was
intended for internal use only as it can't be used for CPack after
CPack.cmake script is included.
Patch removes local workarounds that were required by old macro,
fixes default setting of variables that by default inherit value from
another variable that already went through old default setting macro
(e.g. value of CPACK_PACKAGE_INSTALL_REGISTRY_KEY caused error for
wrong escapes if CPACK_PACKAGE_INSTALL_DIRECTORY contained escaped
back slashes) and provides a test for correct escaping of characters.
8ea7611b find_program: Optionally consider all names in each directory
fc1990c9 cmFindProgramCommand: Re-implement search using more flexible approach
fdbfc9f6 Tests: Add explicit testing for find_program
907a919b cmSystemTools: Drop unused StringEndsWith method
ed4de3c9 cmFindProgramCommand: Use Names member instead of passing it
bf32b95e cmFindLibraryCommand: Avoid repeating search for the same name
Add an OPENSSL_USE_STATIC_LIBS option to enable it. Adjust
CMAKE_FIND_LIBRARY_SUFFIXES to only look for .a and .lib files. Also
adjust the search paths on Windows for installer locations of static
libraries.
Provide each variant in ZLIB_LIBRARIES and ZLIB::ZLIB imported location
properties when one is found, while maintaining support for manually
setting the library via ZLIB_LIBRARY.
When more than one value is given to the NAMES option this command by
default will consider one name at a time and search every directory for
it. Add a NAMES_PER_DIR option to tell this command to consider one
directory at a time and search for all names in it.
In the get_filename_component command, add a new BASE_DIR parameter to
use with the ABSOLUTE and REALPATH options. This will be used when
finding an absolute path from a relative path.
If {ARCHIVE,LIBRARY,RUNTIME}_OUTPUT_DIRECTORY is set with a genex then
do not add the per-config subdirectory on multi-config generators.
This will allow projects to use $<CONFIG> to place the per-config
part of the directory path somewhere other than the end.
if(TEST TestNameThatExists) will return true if a test with the name
TestNameThatExists has been added with add_test. The syntax is similar
to if(TARGET TargetName). Since use of "TEST" as an argument to if()
could previously be interpreted as a non-keyword argument, add policy
CMP0064 to treat it as a keyword as NEW behavior.
Refactor the -Wdev and -Wno-dev to use a generic -W parser that follows
the GCC pattern. Include support for setting CMAKE_ERROR_DEPRECATED and
CMAKE_WARN_DEPRECATED via the deprecated warning. Add -Werror=dev and
-Wno-error=dev options so that dev warning options are in line with
deprecated warning options. Use a new CMAKE_SUPPRESS_DEVELOPER_ERRORS
internal cache entry to store the above new dev options persistently.
Add tests for new options and updated cmake documentation and release
notes to list new options.
The --trace option is helpful, but sometimes, what you're looking for is
deep under many layers of function calls and figuring out what instance
of the function call you're looking at is tedious to determine (usually
involving patching and message()). Instead, add a --trace-expand option
to trace while expanding commands into what CMake actually sees.
Extend the Nsight Tegra project generator to add bunch of properties
with the backing variables to fine-tune the generated projects.
Add target properties that map to all "Configuration" PropertyGroups for
each configuration:
* ANDROID_ARCH
* ANDROID_STL_TYPE
Add target properties that map to the AntBuild section of vcxproj files:
* ANDROID_ANT_ADDITIONAL_OPTIONS
* ANDROID_ASSETS_DIRECTORIES
* ANDROID_JAR_DEPENDENCIES
* ANDROID_JAR_DIRECTORIES
* ANDROID_JAVA_SOURCE_DIR
* ANDROID_NATIVE_LIB_DEPENDENCIES
* ANDROID_NATIVE_LIB_DIRECTORIES
* ANDROID_PROCESS_MAX
* ANDROID_PROGUARD
* ANDROID_PROGUARD_CONFIG_PATH
* ANDROID_SECURE_PROPS_PATH
* ANDROID_SKIP_ANT_STEP
Reviewed-by: Dmitry Polyanitsa <dpolyanitsa@nvidia.com>
Add a TARGET_MESSAGES property to control whether Makefile targets print
the "Built target " completion messages. Default to ON to preserve
existing behavior.
8f86407c Windows: Optionally generate DLL module definition files automatically
069aa93b bindexplib: Add support for "/bigobj" format objects
61bbbdcf bindexplib: Fix treatment of some symbols
de70c922 bindexplib: Teach DumpFile to return errors
8ea69dfe bindexplib: Build source as part of CMakeLib
2963cb2a bindexplib: Wrap long lines
4ff09893 bindexplib: Drop code that CMake does not need
7de8276c bindexplib: Add copyright/license notice block
65086ad7 bindexplib: Import original implementation from CERN
Allow the `Swift` language to be enabled with the Xcode generator for
Xcode >= 6.1. Reject it on other generators and with older Xcode
versions. Since Apple is the only vendor implementing the language
right now, the compiler id can be just `Apple`.
Added new USES_TERMINAL option to the ExternalProject_Add_Step
function. This option passes USES_TERMINAL to the underlying
add_custom_command call so that the Ninja console pool is used.
Also, corresponding new USES_TERMINAL_<step> options were added
to the ExternalProject_Add function.
Justification: if using Ninja with a CMake superbuild, it's often
desirable to limit the superbuild to ONE sub-Ninja process at a
time to avoid oversubscribing the CPU. Using the console pool also
makes it easy to monitor the progress of the sub-Ninja process.
Independent USES_TERMINAL_<step> arguments are passed to
ExternalProject_Add instead of one USES_TERMINAL argument that
controls everything. Users may wish to run some steps in parallel
but not others (e.g. parallelize configure but not build).
Create target property WINDOWS_EXPORT_ALL_SYMBOLS to automatically
generate a module definition file from MS-compatible .obj files and give
it to the linker in order to export all symbols from the .dll part of a
SHARED library.
Add a TestLoad setting to CTest that can be set via a new --test-load
command-line option, CTEST_TEST_LOAD variable, or TEST_LOAD option to
the ctest_test command. Teach cmCTestMultiProcessHandler to measure
the CPU load and avoid starting tests that may take more than the
spare load currently available. The expression
<current_load> + <test_processors> <= <max-load>
must be true to start a new test.
Co-Author: Zack Galbreath <zack.galbreath@kitware.com>
8bcec4d2 Help: Add notes for topic 'GNUInstallDirs-special-prefixes'
c8bd37ec GNUInstallDirs: Add special cases for certain prefixes
5f30f175 GNUInstallDirs: Add test cases
Create a <LANG>_COMPILER_LAUNCHER target property (initialized by a
CMAKE_<LANG>_COMPILER_LAUNCHER variable) to specify a compiler launcher
tool. This will supersede the CMAKE_<LANG>_COMPILER_ARG1 approach to
using such tools. The old approach set CMAKE_<LANG>_COMPILER to the
launcher tool while the new approach leaves this variable set to the
actual compiler.
Implement this property for Makefile and Ninja generators. It cannot be
implemented for VS or Xcode generators as the IDE build tools offer no
such hooks.
Revert commit v3.3.0-rc1~435^2 (Windows-GNU: Do not tell find_library to
treat '.dll' as linkable, 2015-02-18). MinGW tools support linking to
'.dll' files directly and many non-CMake build systems still do not
provide a separate '.dll.a' file.
The test for this variable was removed in commit v2.8.8~330^2~7 (complex:
Remove ancient unused ComplexRelativePaths test, 2011-12-23).
Commit v3.1.0-rc1~425^2~2 (backtrace: Convert to local paths in
IssueMessage, 2014-03-12) appears to have accidentally made some backtraces
print relative paths with the variable because conversions which used to be
done at configure time, before the variable had an effect are now potentially
done at generate time.
The documentation of the variable says not to use it, and the docs are wrong in
that the variable actually applies in per-directory scope.
The read of the variable makes it harder to split conversion methods from
cmLocalGenerator where they don't belong. Remove it now.
Add section headers similar to the 3.2 release notes and move each
individual bullet into an appropriate section. Revise and consolidate
some bullets covering related areas.
Move all development release notes into a new version-specific document:
tail -q -n +3 Help/release/dev/* > Help/release/3.3.rst
git rm -- Help/release/dev/*
except the sample topic:
git checkout HEAD -- Help/release/dev/0-sample-topic.rst
Reference the new document from the release notes index document.
Add a title and intro sentence to the new document by hand.
The <LANG>_VISIBILITY_PRESET and VISIBILITY_INLINES_HIDDEN were first
merged in commit v2.8.12~322 (Merge topic 'VISIBILITY_PRESET-property',
2013-06-05) but worked only for shared libraries and executables with
exports. Prior to commit v3.0.0-rc1~581^2 (GenerateExportHeader:
Deprecate add_compiler_export_flags function., 2013-09-02) the
add_compiler_export_flags function was used to add visibility flags to
all targets.
The visibility flags are useful for sources in all target types because
they may be later linked into shared libraries or executables with
exports. Introduce policy CMP0063 to enable them for all target types
while preserving compatibility with existing projects that do not expect
this.
Add an ExternalData_NO_SYMLINKS to enable use of copies instead of
symlinks to populate the real data files behind a DATA{} reference.
This will be useful on UNIX-like systems when the underlying filesystem
does not actually support symbolic links.
Suggested-by: Matt McCormick <matt.mccormick@kitware.com>
This reverts commit f85db2f323.
Discussion by the QtCreator community at
https://bugreports.qt.io/browse/QTCREATORBUG-13695
raises concerns about this particular approach to working with CMake
projects using QtCreator. Also, the functionality and design of the QBS
extra generator was never discussed on the CMake mailing list or with
QtCreator developers. There may be better ways to make the two tools
work together.
In order to avoid committing to long-term support of this generator
prior to such discussion taking place, revert it from CMake for now.
We may restore this or use an alternative design based on results of
such discussion.
e462ef74 Help: Add notes for topic 'cmake-gui-osx-install-command-line'
8ea2db26 cmake-gui: Replace command-line install dialog with information box
438ce4a0 cmake-gui: Add --install option to add command-line tools on OS X
41477d5c cmake-gui: Drop undocumented and unused --mac-install option
Create a <LANG>_INCLUDE_WHAT_YOU_USE target property (initialized by a
CMAKE_<LANG>_INCLUDE_WHAT_YOU_USE variable) to specify an IWYU command
line to be run along with the compiler.
The find_package command, on Windows, has always searched build trees
recently visited by cmake-gui (or CMakeSetup at one time). This was
done when the command was created with the intention of simplifying
workflows involving building multiple dependent projects. However,
this behavior depends on recent developer interaction and therefore
can create different find results based on transient system states.
It can lead to surprising results and user confusion.
Since this behavior was first added CMake has gained many more search
options, better error messages when a package is not found, and a
package registry. The latter in particular allows projects to make
their build trees available for dependent projects to find without
user intervention. Therefore the originally intended workflow can
be achieved in other, more stable ways.
After the above evoluion of find_package we have now decided that
the magic search-where-cmake-gui-was behavior does more harm than
good. Drop it. We do not need a policy for this behavior change
because it only affects interactive use.
Use the KWSys Process "MergeOutput" option to give the child process
the same pipe (or file) for both stdout and stderr. This allows
natural merging of stdout and stderr together instead of merging
on arbitrary buffered read boundaries as before.
This reverts commit 242c3966 (add_custom_command: Diagnose
MAIN_DEPENDENCY limitation, 2015-03-09) and the follow up commit
b372a99a (UseSWIG: Do not use MAIN_DEPENDENCY on custom commands,
2015-03-26).
I misdiagnosed the underlying issue that prompted creation of policy CMP0057.
The actual issue surfaces when a single custom command's MAIN_DEPENDENCY
is listed in more than one target; this issue will have to be addressed
independently.
66b641f4 Help: Add notes for topic 'add-GreenHills-MULTI-generator'
48004d9d Add a 'Green Hills MULTI' generator on Windows
051d8be1 cmLocalGenerator: Constify some cmTarget and cmGeneratorTarget arguments
The UPPERCASE name was inconsistent with config-packages, the
find_dependency macro, and even FPHSA itself, which expects
components to be specified with names matching ExactCase.
The FOUND_VAR was only permitted to have two possible values, and
now both are set for compatibility. Document it as obsolete, and
adjust the code for the same. Users of the variable should just
remove it.
We never implemented them for VS 11 (2012), 12 (2013), or 14 (2015).
For VS 10 (2010) the reload macro does not work correctly when run from
inside a build launched through the IDE because stopping the build kills
the CMake that is driving the reload. Fortunately VS >= 10 know how to
reload the whole solution anyway.
882f48e5 Link libraries by full path even in implicit directories
318cd370 Help: Add link target for Find Modules section of cmake-developer.7
1535dcd8 Tests: Teach RunCMake to optionally merge command output to stdout
When CMP0003 was first introduced we wanted to link all libraries by
full path. However, some projects had problems on platforms where
find_library would find /usr/lib/libfoo.so when the project really
wanted to link to /usr/lib/<arch>/libfoo.so and had been working by
accident because pre-CMP0003 behavior used -lfoo to link.
We first tried to address that in commit v2.6.0~440 (Teach find_library
to avoid returning library paths in system directories, 2008-01-23) by
returning just "foo" for libraries in implicit link directories. This
caused problems for projects expecting find_library to always return a
full path. We ended up using the solution in commit v2.6.0~366 (...
switch library paths found in implicit link directories to use -l,
2008-01-31). However, the special case for libraries in implicit link
directories has also proven problematic and confusing.
Introduce policy CMP0060 to switch to linking all libraries by full path
even if they are in implicit link directories. Explain in the policy
documentation the factors that led to the original approach and now to
this approach.
XAML files are by default of type Page in the vcxproj and can be
overriden by setting the VS_XAML_TYPE property. The .cpp and .h file
of the same name are automatically added as depending on the XAML file.
New VSXaml test builds a basic XAML WindowsStore 8.1 app with VS2013.
Beginning in CUDA 5.5 a static version of the cuda runtime library
became available. Since nvcc defaults to using this library over the
shared version, FindCUDA will also default to using this version. There
are many advantages to using the static version (most importantly to
avoid conflicts with multiple versions when building a CUDA based
library). Offer a CUDA_USE_STATIC_CUDA_RUNTIME option to control
this behavior.
Add policy CMP0059 to cover this change. The property has been
deprecated since CMake 2.4 anyway.
This will help clean up cmMakefile -- the DefineFlagsOrig member should
not need to exist.
Revert commit v3.0.0-rc1~175^2~20 (add_dependencies: Disallow use with
INTERFACE_LIBRARY, 2013-12-25). Teach our dependency analysis to
transitively follow INTERFACE target utility dependencies as was done or
IMPORTED targets in commit v2.8.6~127^2~1 (Allow add_dependencies() on
imported targets, 2010-11-19). Extend the InterfaceLibrary test with a
case to cover header generation for a header-only INTERFACE library via
a custom target.
Extend the ``DATA{Dir/,...}`` syntax with a new ``RECURSE:`` option
to enable recursive matching of associated files. This will allow
an entire directory tree of data to be referenced at once.
bd9c7f9b Ninja: Add policy to require explicit custom command byproducts
ed8e30b0 cmGlobalNinjaGenerator: Optimize handling of known build outputs
ad094f43 cmGlobalNinjaGenerator: Fix spelling of "unknown"
82a37d3c cmGlobalNinjaGenerator: Drop unused member
4178cd88 Help: Add notes for topic 'xcode-xctest'
87a4b858 Tests: Add XCTest example to test Frameworks and Cocoa App Bundles
ba14510b OS X: Add FindXCTest module
3714955b OS X: Add handling for XCTest bundles
54a5cdbb Tests: Compute Xcode version for any generator on OS X
Add policy CMP0058 to avoid generating 'phony' ninja rules for unknown
custom command dependencies. This requires projects to specify their
custom command byproducts explicitly. With this requirement we no
longer have to assume that unknown custom command dependencies are
generated and can instead simply assume they are source files expected
to exist when the build starts. This is particularly important in
in-source builds. It is also helpful for out-of-source builds to allow
Ninja to diagnose missing files before running custom command rules that
depend on them.
Implement a brand new FindMatlab module:
- Add support for versions and components.
- Find Matlab and its version in a more precise and multiplatform way.
- Add API to create a new mex extension with documentation.
- Add API to add matlab unit tests (with or without the unit test framework).
- Find as much as possible based on a single Matlab_ROOT_DIR cache entry
and allow the user to change it to re-find everything.
232a6883 Help: Add release notes for target-language-genex.
9e168941 File(GENERATE): Process genex evaluation files for each language.
b734fa44 Genex: Allow COMPILE_LANGUAGE when processing include directories.
0b945ea9 Genex: Allow COMPILE_LANGUAGE when processing compile definitions.
5c559f11 Genex: Enable use of COMPILE_LANGUAGE for compile options.
e387ce7d Genex: Add a COMPILE_LANGUAGE generator expression.
4a0128f4 VS6: Compute CMAKE_*_FLAGS and COMPILE_DEFINITIONS* only when needed
Previously the module did not support projects using installation
components because install(PROGRAMS) was never called with COMPONENT.
Add an option to specify the COMPONENT so that projects doing this do
not have to resort to using CMAKE_INSTALL_SYSTEM_RUNTIME_LIBS_SKIP and
writing the install rule by hand.
Allow URL templates to contain a %(algo:<key>) placeholder that is
replaced by mapping the canonical hash algorithm name through a map
defined by the <key>.
Extend the Module.ExternalData test to cover the behavior.
Extend the RunCMake.ExternalData test to cover error cases.
6cc01c14 CPackWIX: Add release notes for the wix-shortcut-properties topic.
135febf0 CPackWIX: Enhance CMake CPack WIX generated installer.
e6731f48 CPackWIX: Add new CPACK_STARTUP_SHORTCUTS property.
279605f5 CPackWIX: Add installed file properties for the creation of shortcuts.
53d7daff CPackWIX: Refactor start menu and desktop shortcut creation.
dc0f3fb4 CPackWIX: Explicitly list CPack WIX headers for IDE convenience.
Since jsoncpp 0.7.0 (2014-11-20) the upstream may provide a CMake
package configuration file such that find_package(jsoncpp) will find a
jsoncppConfig.cmake file. In order to avoid conflicting with this
(especially on case-insensitive filesystems), and since we always prefer
projects to provide package config files (that they maintain), it is
better to not provide FindJsonCpp publicly.
Move FindJsonCpp into a private source directory that is not installed
so that we can still use it for building CMake itself.
Reported-by: Ryan Pavlik <ryan.pavlik@gmail.com>
The find_package command already knows how to compute installation
prefixes from PATH. Use the same approach to establish prefixes for
find_library, find_file, and find_path to use to look in directories
like "<prefix>/lib[/<arch>]" and "<prefix>/include" for libraries and
headers. This will reduce the amount of configuration end users need to
do to establish a work environment rooted under a specific prefix.
4cf3589e Help: Add notes for topic 'compiler-version-Fortran'
f611406f Fortran: Test that CMAKE_Fortran_COMPILER_VERSION is set (#15372)
c6e1f464 Fortran: Detect G95 compiler version
0033faac Fortran: Detect PGI compiler version
302d47b1 Fortran: Detect XL and VisualAge compiler versions
8c8b77a5 Fortran: Detect GNU compiler version
49562a77 Fortran: Detect PathScale compiler version
aa77b631 Fortran: Detect SunPro compiler version
2e09c423 Fortran: Detect Intel compiler version
e6ebc814 Fortran: Add infrastructure to detect compiler version (#15372)
This will allow us to use a value other than just the config name
for the project OutputDirectory setting used for $(OutDir).
Also use $(ConfigurationName) instead of $(OutDir) for the link
directory configuration suffix since that is a hard-coded instance of
a use case for CMAKE_CFG_INTDIR.
This will allow per-config destinations for targets in EXPORT sets.
Using multiple install(TARGETS) with separate CONFIGURATIONS is
rejected as a target appearing more than once in an export set.
Now instead one can write
install(TARGETS foo EXPORT exp DESTINATION lib/$<CONFIG>)
to get a single logical membership of the target in the export set
while still having a per-config destination.
f7e33820 Add release notes for export-interface-source-files.
6da65b39 Allow export of targets with INTERFACE_SOURCES.
736bcb96 Tests: Move IfacePaths test stderr files.
d9f8390d Tests: Run IfacePaths tests with a parameter.
cc152094 Tests: Split part of include_directories test to a generic location.
63668954 Help: Add notes for topic 'makefile-progress-improvements'
ae775fe8 Makefile: Change link step message color to bold green
7bb50e4a Makefile: Add progress to link step messages
c6ada827 Makefile: Print all color escape sequences before newline
8521fdf5 Makefile: Fix output during parallel builds (#12991)
69ac6d27 bootstrap: Enable color Makefile output
1814cf74 Help: Add notes for topic 'add-CheckFortranCompilerFlag'
54e900ab CheckFortranCompilerFlag: Add test case
393a45e2 CheckFortranCompilerFlag: Add module to check Fortran flag existence
In commit v3.0.0-rc1~9 (Help: Rename 3.0 release notes to 3.0.0,
2014-02-19) we anticipated the possibility of bugfix-only release notes.
However, in practice we have no release notes for bug fix releases
because we do not cover bug fixes in release notes at all, only new
features. Instead we've been updating the feature-level release notes
document in bug fix releases, treating errors in the document as bugs.
It makes more sense to maintain release notes at the feature-release
level, so rename the documents accordingly. Also update the document
titles and intro text to refer only to feature versions and not bugfix
versions.
Add section headers similar to the 3.1 release notes and move each
individual bullet into an appropriate section. Revise and consolidate
some bullets covering related areas.
Co-Author: Stephen Kelly <steveire@gmail.com>
Move all development release notes into a new version-specific document:
tail -q -n +3 Help/release/dev/* > Help/release/3.2.0.rst
git rm -- Help/release/dev/*
except the sample topic:
git checkout HEAD -- Help/release/dev/0-sample-topic.rst
Reference the new document from the release notes index document.
Add a title and intro sentence to the new document by hand.
809a5a5e Help: Add notes for topic 'CTestCoverageCollectGCOV-refinements'
03c0812c CTestCoverageCollectGCOV: Fix handling of international characters
8caa4e72 CTestCoverageCollectGCOV: Add test case
5c828cc8 CTestCoverageCollectGCOV: Allow custom flags to gcov
30cb628e CTestCoverageCollectGCOV: Fix handling of large file counts
ab9fa54d Xcode: Switch to internal CMAKE_MAKE_PROGRAM lookup by generator (#15324)
11e2e6ca Xcode: Select make program at build time
e4055a61 Xcode: Add internal API to find xcodebuild
The "cmakexbuild" wrapper is not needed for Xcode 4 and above, and the
path to it may change when CMake moves. Avoid storing a specific path
to a build program in CMakeCache.txt and instead compute the value for
CMAKE_MAKE_PROGRAM on demand. However, if a user does set the value
explicitly then honor it.
This does for Xcode what commit v3.0.0-rc1~260^2~4 (VS: Switch to
internal CMAKE_MAKE_PROGRAM lookup by generators, 2013-11-15) did for
Visual Studio generators.
This will make them use the 'console' pool with the Ninja generator.
Impacted targets are:
- Built-in targets: install, install/local, install/strip, tests,
package, package_source, rebuild_cache
- Targets provided by the CTestTargets module: Nightly, Continuous,
Experimental,
and all their variants (*Start, *Configure, ...)
Read file names from the lines of a specified file. Reject input lines
starting in '-' to leave room for option parsing to be added later. Add
just '--add-file=' now to allow files starting in '-' to be specified.
d0adcccb try_run: Add tests for LINK_LIBRARIES with mock libraries.
223c5cb7 try_run: Add test for bad link libraries.
e2b1f058 try_run: Add support for LINK_LIBRARIES option.
Most functionality is already implemented in Source/cmCoreTryCompile.{h,cxx}.
Document and improve argument parsing.
This functionality is already being used by a number of modules, like
CheckCSourceCompiles.cmake, but it is not documented.
When using system curl, we trust it to be configured with desired CA
certs. When using our own build of curl, we use os-configured CA certs
on Windows and OS X. On other systems, try to achieve this by searching
for common CA cert locations. According to a brief investigation, the
curl packages on popular Linux distros are currently configured as:
* Arch: /etc/ssl/certs/ca-certificates.crt
* Debian with OpenSSL: /etc/ssl/certs
* Debian with GNU TLS: /etc/ssl/certs/ca-certificates.crt
* Debian with NSS: /etc/ssl/certs/ca-certificates.crt
* Fedora: /etc/pki/tls/certs/ca-bundle.crt
* Gentoo with OpenSSL: /etc/ssl/certs
* Gentoo without OpenSSL: /etc/ssl/certs/ca-certificates.crt
Teach CMake and CTest to look for these paths and use them as a CA path
or bundle when no other os-configured or user-specified CAs are
available.
Add an option to set the mtime of entries in a tarball so that one can
create a tarball with a consistent content hash (e.g. MD5) for a given
set of files regardless of their current timestamps on disk. This will
be useful for submission of tarballs to CDash, which tracks content
hashes to avoid duplication.
Inspired-by: Bill Hoffman <bill.hoffman@kitware.com>
004e1540 Features: Record for GNU 4.4.
2a5ca650 Features: Wrap failure-test in UNIX condition.
1ae2c6b2 Features: Blacklist cxx_constexpr test for GNU 4.5.
c66e3317 Features: Use a more-common feature in cycle-test.
c43a6dc5 Features: Update comment in test to match the code.
78259135 Features: Test presence of cxx_auto_type with genex.
7b9fc88b Features: Remove outdated comment.
00194ea7 Help: Add notes for topic 'SolarisStudio-compile-features'
bcb04783 Features: Record for SolarisStudio 12.4.
536c535c Features: Adjust cxx_variadic_templates unit test for SolarisStudio.
5d57970d Features: Use variable in cxx_inheriting_constructors test.
69182ce4 Features: Ensure that the cxx_auto_type test is correct.
59e6e15c Help: Add notes for topic 'WriteCompilerDetectionHeader-multi-file-lang'
54156d72 WCDH: Generate per-language files in multi-file mode.
d84d6ed4 WCDH: Allow compilers to specify features for one language but not the other.
7dcdfec9 WCDH: Find a language-specific DetermineCompiler.cmake if present.
770ba876 Help: Add notes for topic 'GNU-4.6-compile-features'
b15c008f Features: Record for GNU 4.6.
f13a2eb1 Features: Adjust the RunCMake test to use more-common features.
1f19ac4d Features: Adjust cxx_variadic_templates unit test for GNU < 4.7.
0798d1e5 Features: Extend the generalized_initializers test for GNU < 4.7.
938bd94e Features: Test __GXX_EXPERIMENTAL_CXX0X__ macro for GNU < 4.7 compatibility.
462c630b Features: Don't test __cplusplus value for CXX98 on GNU.
222ec86f Features: Test an old value of __STDC_VERSION__ for GNU < 4.7 compatibility.
6e909035 Features: Record C/CXX dialect flags for GNU 4.6.
bfc995cc Features: Remove wrong content from else() condition.
1532b921 Features: Make cxx_noexcept available from GNU 4.6.
1f4649e6 Features: Update the default_dialect test for old GNU-like compilers.
a60027a6 Features: Ensure appropriate return value from feature test macros.
This fixes several reported bugs about CMake not handling
non-ascii paths on Windows.
Practically, the use of some unicode characters may still
be limited by the build or compiler tools.
For example, a user may be limited by the build tools to
using characters within the Windows ANSI code page (which can
include non-ascii characters in the current system language).
da928d30 Help: Add notes for topic 'Apple-compiler-selection'
1f085e11 OS X: Resolve compiler in /usr/bin to that reported by Xcode xcrun
85d31735 CMakeDetermineCompiler: Factor out xcrun invocation into a macro
dcd72a74 Help: Add notes for topic 'Xcode-clang-compile-features'
3ad893b5 Features: Record for historical Xcode clang versions.
98965fb1 Features: Record dialect flags for AppleClang 4.0+.
Revert commits:
2d738ce3 Help: Add notes for topic 'feature_record_msvc'
f73718c9 Features: Enable writing of MSVC compiler feature header.
64c30bdc Features: Record for MSVC C++ 2015 and MSVC C 2010-2015.
225c0ef8 Features: Record for MSVC 2010-2013.
This topic was merged to master prematurely, so remove it.
4035ef78 cmake -E tar: error out on multiple compression formats
d811d238 cmSystemTools: use an enumeration for compression formats
df16dcfb cmake -E tar: add support for .xz files with 'J'
b0a5d393 cmake -E tar: clean up flag documentation
Ruslan Baratov
Chris Pavlina
Michael Scott
Bartosz Kosiorek
Brad King
Domen Vrankar
Roger Leigh
Bartosz Kosiorek
Gregor Jasny
Roger Leigh
Robert Dailey
Chuck Atkins
Robert Maynard
Daniele E. Domenichelli
Simon Levermann
Raffi Enficiaud
Colin Tracey
Thijs Wenker
Gilles Khouzam
Konstantin Podsvirov
Stefan Kislinskiy
Rolf Eike Beer
Robert Goulet
Ben Boeckel
Roman Donchenko
Roman Wüger
Andreas Bergmeier
Paul Romano
Marc Chevrier
Felix Geyer
James Johnston
Roger Leigh
Matt McCormick
Ben Boeckel
Clifford Yapp
Mikhail Filimonov
Michael Ensslin
Daniel Pfeifer
Bill Hoffman
Betsy McPhail
Stephen Kelly
Nils Gladitz
James Bigler
Stanislav Ionascu
Raffi Enficiaud
Gaëtan Lehmann
Johan Andruejol
Justin Borodinsky
Sylvain Joubert
Clinton Stimpson