gkrellm/po/da.po

# Danish Translation of GKrellM
# Released under GPL
# Chris Larsen <darth@vader.dk>, 2003
# In case of doubt the computer terms have been taken from
# http://www.klid.dk/dansk/ordlister/ordliste.html
#
msgid ""
msgstr ""
"Project-Id-Version: gkrellm 2.1.14\n"
"Report-Msgid-Bugs-To: \n"
"POT-Creation-Date: 2010-10-07 10:00-0500\n"
"PO-Revision-Date: 2004-11-09 23:10+0100\n"
"Last-Translator: Chris Larsen <darth@vader.dk>\n"
"Language-Team: n/a\n"
"Language: \n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=iso-8859-1\n"
"Content-Transfer-Encoding: 8bit\n"
"PO-Creation-Date: 2003-07-26 12:00+0200\n"

#: ../src/alerts.c:1165
msgid "GKrellM Set Alerts"
msgstr "GKrellM S<>t Alarm"

#: ../src/alerts.c:1177 ../src/battery.c:1134 ../src/gui.c:567
#: ../src/sensors.c:2820
msgid "Alerts"
msgstr "Alarmer"

#: ../src/alerts.c:1200
msgid "High Limits"
msgstr "<22>vre Gr<47>nser"

#: ../src/alerts.c:1207
msgid "High alarm limit"
msgstr "<22>vre alarm gr<67>nse"

#: ../src/alerts.c:1213
msgid "High warn limit"
msgstr "<22>vre advarsels gr<67>nse"

#: ../src/alerts.c:1220
msgid "Low Limits"
msgstr "Nedre gr<67>nse"

#: ../src/alerts.c:1226
msgid "Low warn limit"
msgstr "Nedre advarsels gr<67>nse"

#: ../src/alerts.c:1231
msgid "Low alarm limit"
msgstr "Nedre alarm gr<67>nse"

#: ../src/alerts.c:1241
msgid "Seconds limit conditions must exist to have an alert"
msgstr "Begr<67>nsnig p<> sekunder skal forefindes for at have en alarm"

#: ../src/alerts.c:1253
msgid "Commands - with repeat intervals in seconds"
msgstr "Kommandoer - med gentagelses interval i sekunder"

#: ../src/alerts.c:1263
msgid "Alarm command:"
msgstr "Alarm kommando:"

#: ../src/alerts.c:1283
msgid "Warn command:"
msgstr "Advarsels kommando:"

#: ../src/alerts.c:1307
msgid "A repeat of zero seconds executes the command once per alert."
msgstr "En gentagelse af nul sekunder udf<64>rer kommandoen en gang per alarm."

#: ../src/battery.c:578 ../src/battery.c:976 ../src/battery.c:1009
msgid "GKrellM Battery"
msgstr "GKrellM Batteri"

#: ../src/battery.c:579
msgid ""
"Battery times are unavailable.  You\n"
"could select the Estimated Time option."
msgstr ""
"Batteri tider er ikke tilg<6C>ngelige. Du\n"
"kan v<>lge at bruge estimeret tid."

#: ../src/battery.c:812 ../src/battery.c:818 ../src/battery.c:1229
#: ../src/battery.c:1260
msgid "Battery"
msgstr "Batteri"

#: ../src/battery.c:813
msgid "Battery Percent Limits"
msgstr "Batteri procent gr<67>nser"

#: ../src/battery.c:819
msgid "Battery Minutes Remaining Limits"
msgstr "Batteri minutter tilbage gr<67>nser"

#: ../src/battery.c:977 ../src/battery.c:1010
msgid ""
"The Battery alert units are changed\n"
"and the alert must be reconfigured."
msgstr ""
"Batteriets alarm enheder er <20>ndret\n"
"og alarm skal omkonfigureres"

#: ../src/battery.c:1117 ../src/mail.c:3848 ../src/sensors.c:2688
msgid "<h>Setup\n"
msgstr "<h>Ops<70>tning\n"

#: ../src/battery.c:1118
msgid "<b>Display Estimated Time\n"
msgstr "<b>Vis estimeret tid\n"

#: ../src/battery.c:1119
msgid ""
"If battery times are not reported by the BIOS or if the reported times\n"
"are inaccurate, select this option to display a battery time remaining or\n"
"time to charge which is calculated based on the current battery percentage\n"
"level, user supplied total battery times, and a linear extrapolation model.\n"
msgstr ""
"Hvis batteri tid ikke bliver rapporteret af BIOS eller hvis de raportede\n"
"tider er un<75>jagtige, s<> v<>lg denne mulighed for at vise resterende batteri\n"
"tid, batteri opladnings tid som er beregnet p<> grundlag af den aktuelle\n"
"batteri opladnings procent, brugerens indtastede totale batteri levetid\n"
"og en lin<69>r ekstrapolations model.\n"

#: ../src/battery.c:1124
msgid "<b>Total Battery Times\n"
msgstr "<b>Total batteri tider\n"

#: ../src/battery.c:1125
msgid ""
"Enter the typical total run time and total charge time in hours for your\n"
"battery.\n"
msgstr ""
"Indtast den typiske total k<>re tid og total opladnings tid i timer for dit\n"
"batteri.\n"

#: ../src/battery.c:1128
msgid "<b>Exponential Charge Model\n"
msgstr "<b>Eksponentiel opladnings model\n"

#: ../src/battery.c:1129
#, no-c-format
msgid ""
"For some charging systems battery capacity rises exponentially, which\n"
"means the simple linear model will grossly underestimate the time to 100%.\n"
"Select the exponential model for more accuracy in this case.\n"
msgstr ""
"For nogle opladnins systemer stiger batteriets kapacitet eksponentielt, som\n"
"f<>lge af dette vil den simple lin<69>re model fejlagtigt beregne levetid til "
"100%.\n"
"Hvis dette er tilf<6C>ldet, V<>lg da den eksponentielle opladnings model.\n"

#: ../src/battery.c:1136 ../src/cpu.c:1284 ../src/disk.c:1360 ../src/fs.c:2494
#: ../src/mem.c:1281 ../src/net.c:2934 ../src/proc.c:904 ../src/sensors.c:2698
msgid "Substitution variables may be used in alert commands.\n"
msgstr "Erstatninger for variable m<> bruges i alarm kommandoer.\n"

#: ../src/battery.c:1137
msgid "\t$p    battery percent level.\n"
msgstr "\t$p    batteri niveau i procent\n"

#: ../src/battery.c:1138
msgid "\t$t    battery time left.\n"
msgstr "\t$t    batteri tid tilbage\n"

#: ../src/battery.c:1139
msgid "\t$n    battery number.\n"
msgstr "\t$n    batteri nummer.\n"

#: ../src/battery.c:1140
msgid "\t$o    online state (boolean).\n"
msgstr "\t$o    online status (boolsk).\n"

#: ../src/battery.c:1141
msgid "\t$c    charging state (boolean).\n"
msgstr "\t$c    opladnings status (boolsk).\n"

#: ../src/battery.c:1143 ../src/fs.c:2496 ../src/inet.c:1823 ../src/mem.c:1284
msgid "<h>Mouse Button Actions:\n"
msgstr "<h>Muse knap funktioner:\n"

#: ../src/battery.c:1144 ../src/fs.c:2497 ../src/gui.c:1038 ../src/inet.c:1824
#: ../src/mail.c:3889 ../src/mail.c:3892 ../src/mem.c:1285
msgid "<b>\tLeft "
msgstr "<b>\tVenstre "

#: ../src/battery.c:1145
msgid ""
" click on the charging state decal to toggle the display mode\n"
"\t\tbetween a minutes, percentage, or charging rate display.\n"
msgstr ""
" klik p<> opladnings tilstand dekorationen for at skifte visning\n"
"\t\tmellem minutter, procent eller opladnings rate.\n"

#: ../src/battery.c:1147 ../src/inet.c:1827 ../src/mail.c:3895
msgid "<b>\tMiddle "
msgstr "<b>\tMellem "

#: ../src/battery.c:1148
msgid ""
" clicking anywhere on the Battery panel also toggles the display mode.\n"
msgstr " klik p<> et vilk<6C>rligt sted p<> Batteri panelet skifter visningen.\n"

#: ../src/battery.c:1164 ../src/clock.c:714 ../src/cpu.c:1307
#: ../src/disk.c:1385 ../src/fs.c:2532 ../src/gui.c:1063 ../src/gui.c:1926
#: ../src/mail.c:4243 ../src/mem.c:1307 ../src/proc.c:918
#: ../src/sensors.c:2836 ../src/sensors.c:2871 ../src/uptime.c:277
msgid "Options"
msgstr "Muligheder"

#: ../src/battery.c:1169 ../src/clock.c:720 ../src/clock.c:739
#: ../src/disk.c:1398 ../src/plugins.c:1746 ../src/sensors.c:2768
msgid "Enable"
msgstr "Aktiver"

#: ../src/battery.c:1174
msgid "Composite Battery"
msgstr "Komposit batteri"

#: ../src/battery.c:1178
msgid "Real Batteries"
msgstr "Faktiske batterier"

#: ../src/battery.c:1184
msgid "Enable Battery"
msgstr "Aktiver batteri"

#: ../src/battery.c:1193
msgid "Display estimated time remaining and time to charge"
msgstr "Vis estimeret tid tilbage og tid til opladning"

#: ../src/battery.c:1201
msgid "Total battery run time in hours"
msgstr "Total batteri k<>re tid i timer"

#: ../src/battery.c:1205
msgid "Total battery charge time in hours"
msgstr "Total batteri opladnings tid i timer"

#: ../src/battery.c:1210
msgid "Exponential charge model"
msgstr "Eksponentiel opladnings model"

#: ../src/battery.c:1218 ../src/inet.c:2017
msgid "Seconds between updates"
msgstr "Sekunder mellem opdatering"

#: ../src/battery.c:1222 ../src/clock.c:755 ../src/cpu.c:1358
#: ../src/disk.c:1431 ../src/fs.c:2529 ../src/inet.c:2011 ../src/mail.c:3932
#: ../src/mem.c:1346 ../src/net.c:3075 ../src/proc.c:958 ../src/sensors.c:2737
#: ../src/uptime.c:274
msgid "Setup"
msgstr "Ops<70>tning"

#: ../src/battery.c:1225 ../src/clock.c:782 ../src/cpu.c:1389
#: ../src/disk.c:1453 ../src/inet.c:2041 ../src/mem.c:1418 ../src/net.c:3063
#: ../src/proc.c:977 ../src/uptime.c:285
msgid "Launch Commands"
msgstr "K<>r kommandoer"

#: ../src/battery.c:1246
msgid "Alerts check for percent capacity remaining."
msgstr ""

#: ../src/battery.c:1251 ../src/clock.c:790 ../src/cpu.c:1412
#: ../src/disk.c:1467 ../src/fs.c:2574 ../src/gui.c:1173 ../src/gui.c:2007
#: ../src/inet.c:2054 ../src/mail.c:4311 ../src/mem.c:1436 ../src/net.c:3105
#: ../src/proc.c:989 ../src/sensors.c:2917
msgid "Info"
msgstr "Info"

#: ../src/chart.c:1039
msgid "Ag8"
msgstr "Ag8"

#: ../src/chart.c:2310 ../src/chart.c:2467
msgid "/Control/Auto mode sticks at peak value"
msgstr "/Kontrol/Auto tilstand h<>nger i maximum v<>rdi"

#: ../src/chart.c:2314 ../src/chart.c:2465
msgid "/Control/Auto mode recalibrate"
msgstr "/Kontrol/Auto tilstand rekalibrering"

#: ../src/chart.c:2463
msgid "/Control"
msgstr "/Kontrol"

#: ../src/chart.c:2464 ../src/chart.c:2469 ../src/chart.c:2475
msgid "/Control/-"
msgstr "/Kontrol/-"

#: ../src/chart.c:2470 ../src/chart.c:2474 ../src/chart.c:2501
msgid "/Control/Sequence.../1 2 5"
msgstr "/Kontrol/Sekvens.../1 2 5"

#: ../src/chart.c:2472 ../src/chart.c:2503
msgid "/Control/Sequence.../1 1.5 2 3 5 7"
msgstr "/Kontrol/Sekvens.../1 1.5 2 3 5 7"

#: ../src/chart.c:2538
msgid "GKrellM Chart Config"
msgstr "GKrellM Graf konfiguration"

#: ../src/chart.c:2559
msgid "Line style"
msgstr "Linie stil"

#: ../src/chart.c:2566
msgid "Inverted"
msgstr "Inverteret"

#: ../src/chart.c:2574
msgid "Split view"
msgstr "Delt visning"

#: ../src/chart.c:2586
msgid "Hide"
msgstr "Gem"

#: ../src/chart.c:2601
msgid "Resolution per Grid"
msgstr "Opl<70>sning per indeling"

#: ../src/chart.c:2621
msgid "Auto"
msgstr "Auto"

#: ../src/chart.c:2633
msgid "Number of Grids"
msgstr "Antal indelinger"

#: ../src/chart.c:2638
msgid "0: Auto    1-5: Constant"
msgstr "0: Auto    1-5: Konstant"

#: ../src/chart.c:2647
msgid "Chart height"
msgstr "Graf h<>jde"

#: ../src/clock.c:49
msgid "%l:%M <span foreground=\"$A\"><small>%S</small></span>"
msgstr ""

#: ../src/clock.c:54
msgid "%a <span foreground=\"$A\"><big><big>%e</big></big></span> %b"
msgstr ""

#: ../src/clock.c:688
msgid "<h>Clock/Calendar Format Strings\n"
msgstr ""

#: ../src/clock.c:689
msgid ""
"The display format strings should contain strftime conversion\n"
"characters and Pango text attribute markup strings.\n"
msgstr ""

#: ../src/clock.c:692
msgid ""
"For the clock, the provided default strings will display a 12 hour\n"
"clock with seconds, a 12 hour clock with AM/PM indicator, or a 24 hour\n"
"clock with seconds.\n"
msgstr ""

#: ../src/clock.c:696
msgid ""
"The special $A substitution variable expands to the current theme\n"
"alternate color and is for use with the Pango \"foreground\" attribute.\n"
msgstr ""

#: ../src/clock.c:716 ../src/clock.c:787 ../src/clock.c:850
msgid "Calendar"
msgstr "Kalender"

#: ../src/clock.c:723 ../src/clock.c:742
msgid "Display format string:"
msgstr ""

#: ../src/clock.c:735 ../src/clock.c:801 ../src/clock.c:811
msgid "Clock"
msgstr "Ur"

#: ../src/clock.c:757
msgid "Clock Chime Commands"
msgstr "Ur klokkeslag kommandoer"

#: ../src/clock.c:762
msgid "Hour"
msgstr "Time"

#: ../src/clock.c:770
msgid "Quarter hour"
msgstr "Kvarter"

#: ../src/clock.c:780
msgid "Loop hour chime command"
msgstr "K<>r klokkelsag kommand uendeligt"

#: ../src/config.c:272
#, c-format
msgid "Bad textcolor line %s\n"
msgstr "D<>rlig tekst farve linie %s\n"

#: ../src/config.c:1052 ../src/config.c:1083
#, c-format
msgid "  Cannot load file image: %s\n"
msgstr "  Kan ikke hente billed filen: %s\n"

#: ../src/config.c:1058
msgid "  Cannot load GdkPixbuf inline data.\n"
msgstr "  Kan ikke hente GdkPixbuf inline data.\n"

#: ../src/config.c:1089
#, c-format
msgid "  Cannot load xpm: %s\n"
msgstr "  Kan ikke hente xpm: %s\n"

#: ../src/config.c:1753
#, c-format
msgid ""
"Incomplete config line:\n"
"    %s\n"
msgstr ""
"Ufuldst<73>ndig konfigurations linie:\n"
"    %s\n"

#: ../src/config.c:2438
#, c-format
msgid "Cannot open config file %s for writing.\n"
msgstr "Kan ikke <20>bne konfigurations fil %s for skrivning.\n"

#: ../src/cpu.c:187
#, c-format
msgid "CPU%s"
msgstr "CPU%s"

#: ../src/cpu.c:855
msgid "sys time"
msgstr "sys tid"

#: ../src/cpu.c:856
msgid "user time"
msgstr "user tid"

#: ../src/cpu.c:865 ../src/cpu.c:869 ../src/cpu.c:1117
msgid "nice time"
msgstr "nice tid"

#: ../src/cpu.c:977 ../src/cpu.c:1444
msgid "CPU"
msgstr "CPU"

#: ../src/cpu.c:978 ../src/fs.c:1301 ../src/mem.c:998
msgid "Percent Usage"
msgstr "Procent forbrug"

#: ../src/cpu.c:1276 ../src/disk.c:1352 ../src/gui.c:1010 ../src/inet.c:1812
#: ../src/mem.c:1254 ../src/net.c:2918 ../src/proc.c:895
msgid "<h>Chart Labels\n"
msgstr "<h>Graf beskrivelser\n"

#: ../src/cpu.c:1277 ../src/disk.c:1353 ../src/inet.c:1813 ../src/mem.c:1255
#: ../src/net.c:2919 ../src/proc.c:896
msgid "Substitution variables for the format string for chart labels:\n"
msgstr "Erstat variablerne i format strengen for graf beskrivelser:\n"

#: ../src/cpu.c:1278
msgid "\t$L    the CPU label\n"
msgstr "\t$L    CPU beskrivelse\n"

#: ../src/cpu.c:1279
msgid "\t$T    total CPU time percent usage\n"
msgstr "\t$T    total CPU tid i procent\n"

#: ../src/cpu.c:1280
msgid "\t$s    sys time percent usage\n"
msgstr "\t$s    sys tid i procent\n"

#: ../src/cpu.c:1281
msgid "\t$u    user time percent usage\n"
msgstr "\t$u    bruger tid i procent\n"

#: ../src/cpu.c:1282
msgid "\t$n    nice time percent usage\n"
msgstr "\t$n    nice tid i procent\n"

#: ../src/cpu.c:1311
msgid "Enable CPU"
msgstr "Aktiv<69>r CPU"

#: ../src/cpu.c:1316
msgid "Exclude nice CPU time from krell even if nice is shown on chart"
msgstr "Eksluder nice CPU tid fra krell selvom nice ikke er vist p<> grafen"

#: ../src/cpu.c:1321 ../src/proc.c:928
msgid "Draw fan and temperature values separately (not alternating)."
msgstr "Plot bl<62>ser og temperatur v<>rdier seperat (ikke skiftende)."

#: ../src/cpu.c:1328
msgid "Apply any CPU chart config height change to all CPU charts"
msgstr ""
"Tildel h<>jde <20>ndringer fra hvilken som helst CPU graf, til alle CPU grafer"

#: ../src/cpu.c:1331
msgid "SMP Charts Select"
msgstr "V<>lg SMP Graf"

#: ../src/cpu.c:1334
msgid "Real CPUs."
msgstr "Faktiske CPUer."

#: ../src/cpu.c:1339
msgid "Composite CPU."
msgstr "Samlet CPU."

#: ../src/cpu.c:1345
msgid "Composite and real"
msgstr "Samlet og realistisk"

#: ../src/cpu.c:1361 ../src/disk.c:1434 ../src/inet.c:2023 ../src/mem.c:1349
#: ../src/net.c:3078 ../src/proc.c:961
msgid "Format String for Chart Labels"
msgstr "Format streng for graf beskrivelser"

#: ../src/cpu.c:1374
msgid "\\fu \\.$u\\n\\fs \\.$s"
msgstr "\\fu \\.$u\\n\\fs \\.$s"

#: ../src/cpu.c:1376
msgid "\\ww\\D2\\f\\au\\.$u\\D1\\f\\as\\.$s"
msgstr "\\ww\\D2\\f\\au\\.$u\\D1\\f\\as\\.$s"

#: ../src/cpu.c:1378
msgid "\\ww\\D3\\f\\au\\.$u\\D0\\f\\as\\.$s"
msgstr "\\ww\\D3\\f\\au\\.$u\\D0\\f\\as\\.$s"

#: ../src/cpu.c:1397
#, c-format
msgid "%s"
msgstr "%s"

#: ../src/disk.c:325 ../src/disk.c:1406 ../src/disk.c:1476 ../src/disk.c:1504
#: ../src/sensors.c:2297 ../src/sensors.c:2375 ../src/sysdeps/openbsd.c:410
msgid "Disk"
msgstr "Disk"

#: ../src/disk.c:766 ../src/disk.c:1228
msgid "Write bytes"
msgstr "Skrivning bytes"

#: ../src/disk.c:767 ../src/disk.c:1225
msgid "Read bytes"
msgstr "L<>sning bytes"

#: ../src/disk.c:778
msgid "Disk I/O blocks per sec"
msgstr "Disk I/O blokke per sek"

#: ../src/disk.c:778
msgid "Disk I/O bytes per sec"
msgstr "Disk I/O bytes per sek"

#: ../src/disk.c:894 ../src/net.c:2419
msgid "Bytes per second"
msgstr "Bytes per sekund"

#: ../src/disk.c:1092
msgid "Composite chart combines data for all disks"
msgstr "Samlet graf for data fra alle diske"

#: ../src/disk.c:1354
msgid "\t$L    the Disk label\n"
msgstr ""

#: ../src/disk.c:1355 ../src/inet.c:1814 ../src/mem.c:1256 ../src/net.c:2920
msgid "\t$M    maximum chart value\n"
msgstr "\t$M    maximum graf v<>rdi\n"

#: ../src/disk.c:1356
msgid "\t$T    total read bytes + write bytes\n"
msgstr "\t$T    total l<>ste bytes + skrevne bytes\n"

#: ../src/disk.c:1357
msgid "\t$r    read bytes\n"
msgstr "\t$r    l<>ste bytes\n"

#: ../src/disk.c:1358
msgid "\t$w    write bytes\n"
msgstr "\t$w    skrevne bytes\n"

#: ../src/disk.c:1447
msgid "\\f\\ww\\r\\f$M\\D2\\f\\ar\\. $r\\D1\\f\\aw\\. $w"
msgstr "\\f\\ww\\r\\f$M\\D2\\f\\ar\\. $r\\D1\\f\\aw\\. $w"

#: ../src/fs.c:39 ../src/mem.c:63
msgid "$t - $f free"
msgstr "$t - $f fri"

#: ../src/fs.c:40 ../src/mem.c:1382 ../src/mem.c:1405
msgid "$t - $u used"
msgstr "$t - $u brugt"

#: ../src/fs.c:41 ../src/mem.c:1384 ../src/mem.c:1407
msgid "$t - $U"
msgstr "$t - $U"

#: ../src/fs.c:880
msgid "GKrellM Mount Error"
msgstr "GkrellM monterings fejl"

#: ../src/fs.c:1570
msgid "Primary"
msgstr "Prim<69>r"

#: ../src/fs.c:1584 ../src/fs.c:2309
msgid "Secondary"
msgstr "Sekund<6E>r"

#: ../src/fs.c:1926 ../src/fs.c:2023 ../src/fs.c:2035 ../src/fs.c:2043
msgid "Entry Error"
msgstr "Indtastning fejl"

#: ../src/fs.c:1927
msgid ""
"At least one primary fs monitor must exist to click on in order to show\n"
"secondary ones.\n"
msgstr ""
"Mindst en prim<69>r filsystem overv<72>gning skal eksistere for at man kan f<> vist "
"de sekund<6E>re.\n"

#: ../src/fs.c:2025
msgid "Both a label and a mount point must be entered."
msgstr "B<>de en beskrivelse og et monteringspunkt skal indtastes"

#: ../src/fs.c:2036
msgid "Both mount and umount commands must be entered."
msgstr "B<>de 'mount' og 'umount' kommandoerne skal indtastes."

#: ../src/fs.c:2044
msgid "Missing ejectable device entry."
msgstr "Mangler udskydbar enheds linie."

#: ../src/fs.c:2276 ../src/fs.c:2398 ../src/inet.c:1873 ../src/inet.c:1879
#: ../src/inet.c:1964 ../src/inet.c:1984 ../src/sensors.c:2777
msgid "Label"
msgstr "Beskrivelse"

#: ../src/fs.c:2285 ../src/fs.c:2402
msgid "Mount Point"
msgstr "Monteringspunkt"

#: ../src/fs.c:2316
msgid "Show if mounted"
msgstr "Vis hvis monteret"

#: ../src/fs.c:2322
msgid "Enable /etc/fstab mounting"
msgstr "Tillad /etc/fstab montering"

#: ../src/fs.c:2336
msgid "Ejectable"
msgstr "Udskydbar"

#: ../src/fs.c:2342
msgid "Device"
msgstr "Enhed"

#: ../src/fs.c:2357
msgid "mount"
msgstr "montering"

#: ../src/fs.c:2359
msgid "umount"
msgstr "afmontering"

#: ../src/fs.c:2425
msgid "<h>Mounting\n"
msgstr "<h>Montering\n"

#: ../src/fs.c:2426
msgid ""
"Enter file system mount points to monitor and enter a label to describe\n"
"the mount point.  The krell shows the ratio of blocks used to total blocks\n"
"available.  Mounting commands can be enabled for mount points in one\n"
"of two ways:\n"
"\n"
msgstr ""
"Indtast fil systemets monterings punkt der skal overv<72>ges og indtast en\n"
"beskrivelse af monterings punktet. Krell viser forskellen mellem antal "
"blokke\n"
"brugt i forhold til total antal blokke tilbage. Monterings kommandoen kan "
"aktiveres\n"
"p<> en af f<>lgende m<>der:\n"

#: ../src/fs.c:2431
msgid "<b>\t1) Mounting using /etc/fstab: "
msgstr "<b>\t1) Montering gennem /etc/fstab: "

#: ../src/fs.c:2433
msgid ""
"If a mount point is in your\n"
"\t/etc/fstab and you have mount permission then mount and umount\n"
"\tcommands can be enabled and executed for that mount point simply\n"
"\tby checking the \"Enable /etc/fstab mounting\" option.\n"
"\tMount table entries in /etc/fstab need the \"user\" or \"owner\" option\n"
"\tset to grant this permission unless GKrellM is run as root.\n"
"\tFor example, if you run GKrellM as a normal user and you want\n"
"\tto be able to mount your floppy, your /etc/fstab could have\n"
"\teither of:\n"
msgstr ""
"S<>fremt et monterings punkt er i din\n"
"\t/etc/fstab og du har rettigheder til s<> kan 'mount' og 'umount'\n"
"\tkommandoerne aktiveres og k<>res for dette monterings punkt simpelthen\n"
"\tved at aktivere \"Tillad /etc/fstab montering\" muligheden.\n"
"\tMonterings tabel linierne i /etc/fstab skal have \"user\" eller \"owner\" "
"flag\n"
"\tsat for at tillade rettigheder til GKrellM undtagen hvis den k<>res som "
"root.\n"
"\tFor eksempel, hvis du k<>rer GKrellM som normal bruger og du vil\n"
"\thave mulighed for at montere din floppy, din /etc/fstab kunne have\n"
"\ten linie som enten:\n"

#: ../src/fs.c:2443
msgid "<i>\t\t/dev/fd0 /mnt/floppy ext2 user,noauto,rw,exec 0 0\n"
msgstr "<i>\t\t/dev/fd0 /mnt/floppy ext2 user,noauto,rw,exec 0 0\n"

#: ../src/fs.c:2444
msgid "\tor\n"
msgstr "\teller\n"

#: ../src/fs.c:2445
msgid ""
"<i>\t\t/dev/fd0 /mnt/floppy ext2 user,defaults 0 0\n"
"\n"
msgstr ""
"<i>\t\t/dev/fd0 /mnt/floppy ext2 user,defaults 0 0\n"
"\n"

#: ../src/fs.c:2447
msgid "<b>\t2) Mounting using custom commands: "
msgstr "<b>\t2) Montering med brugertilpassede kommandoer: "

#: ../src/fs.c:2448
msgid ""
"If GKrellM is run as root or if\n"
"\tyou have sudo permission to run the mount commands, then a custom\n"
"\tmount command can be entered into the \"mount command\" entry\n"
"\tbox.  A umount command must also be entered if you choose this\n"
"\tmethod.  Example mount and umount entries using sudo:\n"
msgstr ""
"S<>fremt GKrellM k<>rer som root eller hvis\n"
"\tdu har sudo rettigheder til at k<>re 'mount' kommandoer, s<> kan en\n"
"\tbrugertilpasset 'mount' kommando indtastes i \"monterings kommando\"\n"
"\tfeltet. En 'umount' kommando skal ogs<67> indtastes, s<>fremt du v<>lger\n"
"\tdenne metode. Eksempler p<> mount og umount linier ved brug af sudo:\n"

#: ../src/fs.c:2454
msgid "<i>\t\tsudo /bin/mount -t msdos /dev/fd0 /mnt/A\n"
msgstr "<i>\t\tsudo /bin/mount -t msdos /dev/fd0 /mnt/A\n"

#: ../src/fs.c:2455
msgid "<i>\t\tsudo /bin/umount /mnt/A\n"
msgstr "<i>\t\tsudo /bin/umount /mnt/A\n"

#: ../src/fs.c:2457
msgid ""
"\tNotes: the mount point specified in a custom mount command\n"
"\t(/mnt/A in this example) must be the same as entered in the\n"
"\t\"Mount Point\" entry.  You should have the NOPASSWD option set\n"
"\tin /etc/sudoers if using sudo.\n"
"\n"
msgstr ""
"\tBem<65>rk: monterings punktet anvendt i brugertilpaasset mount kommando\n"
"\t(/mnt/A i dette eksemepl) skal v<>re det samme som indstastet i\n"
"\t\"Monterinspunkt\" feltet. Du b<>r have aktiveret NOPASSWD mulighed\n"
"\ti /etc/sudoers s<>fremt du anvender sudo.\n"

#: ../src/fs.c:2462
msgid "<h>Primary and Secondary Monitors\n"
msgstr "<h>Prim<69>re og Sekund<6E>re overv<72>gninger\n"

#: ../src/fs.c:2463
#, no-c-format
msgid ""
"File system monitors can be created as primary (always visible)\n"
"or secondary which can be hidden and then shown when they are of\n"
"interest.  For example, you might make primary file system monitors\n"
"for root, home, or user so they will be always visible, but make\n"
"secondary monitors for less frequently used mount points such as\n"
"floppy, zip, backup partitions, foreign file system types, etc.\n"
"Secondary FS monitors can also be configured to always be visible if they\n"
"are mounted by checking the \"Show if mounted\" option.   Using this\n"
"feature you can show the secondary group, mount a file system, and have\n"
"that FS monitor remain visible even when the secondary group is hidden.\n"
"A standard cdrom mount will show as 100% full but a monitor for it\n"
"could be created with mounting enabled just to have the\n"
"mount/umount convenience.\n"
"\n"
msgstr ""
"Fil system overv<72>gninger kan laves som enten prim<69>re (altid vist)\n"
"eller sekund<6E>re, som kan skjules og kun vises s<>fremt det er interresant.\n"
"For eksemepl, du vil lave en prim<69>r fil system overv<72>gning af root, home,\n"
"eller user s<> de altid er vist, medens mindre brugte fil systemer som\n"
"floppy,zip, backup partitioner, eksterne fil system type, etc.\n"
"oprettes som sekund<6E>re fil system overv<72>gning.\n"
"Sekund<6E>re FS overv<72>ning kan ogs<67> konfigureres til at v<>re synlige, s<>fremt\n"
"de er monterede, ved at aktivere \"Vis hvis monteret\". Ved at anvende\n"
"denne mulighed, kan du vise den sekund<6E>re gruppe, montere et fil system,\n"
"og have den FS overv<72>gning synlig, selvom den sekund<6E>re grupper er skjult.\n"
"Et standard cdrom monterings punkt vil vises som 100% fyldt, men en "
"overv<72>gning\n"
"kunne oprettes blot for at have monterings muligeden tilstede.\n"
"\n"

#: ../src/fs.c:2480 ../src/mem.c:1261
msgid "<h>Panel Labels\n"
msgstr "<h>Panel beskrivelser\n"

#: ../src/fs.c:2481
msgid "Substitution variables for the format string for file system panels:\n"
msgstr "Erstat variable i format strenge for fil system panelerne:\n"

#: ../src/fs.c:2482
msgid "\t$t    total capacity\n"
msgstr "\t$t    total kapacitet\n"

#: ../src/fs.c:2483
msgid "\t$u    used space\n"
msgstr "\t$u    brugt plads\n"

#: ../src/fs.c:2484
msgid "\t$f    free space\n"
msgstr "\t$f    fri plads\n"

#: ../src/fs.c:2485
msgid "\t$U    used %,\n"
msgstr "\t$U    % brugt,\n"

#: ../src/fs.c:2486 ../src/mem.c:1270
msgid "\t$F    free %\n"
msgstr "\tF$    % fri\n"

#: ../src/fs.c:2487
msgid "\t$l    the panel label\n"
msgstr "\t$l    panel beskrivelse\n"

#: ../src/fs.c:2489
msgid "\t$D    the mount point\n"
msgstr "\t$D    monterings punktet\n"

#: ../src/fs.c:2491
msgid "\t$D    the disk\n"
msgstr "\t$D    disken\n"

#: ../src/fs.c:2498
msgid "click on a panel to scroll a programmable display\n"
msgstr "klik p<> panelet for at rulle den programmerbare visning\n"

#: ../src/fs.c:2499
msgid "\t\tof file system capacities (default is total and free space).\n"
msgstr "\t\taf fil systemes kapaciteter (standard er total og fri plads).\n"

#: ../src/fs.c:2500
msgid "<b>\tWheel "
msgstr "<b>\tHjul "

#: ../src/fs.c:2501
msgid "Shows and hides the secondary file system monitors.\n"
msgstr "Vis og skjul de sekund<6E>re fil system overv<72>gninger.\n"

#: ../src/fs.c:2519
msgid "Panels"
msgstr "Paneler"

#: ../src/fs.c:2537
msgid "Use binary units (MiB, GiG) for reporting disk capacities."
msgstr "Anvend bin<69>re enheder (MiB, GiG) for raportering af disk kapaciteter."

#: ../src/fs.c:2543
msgid "Auto eject when ejectable devices are unmounted"
msgstr "Auto udskyd n<>r udskydbare enheder bliver afmonteret"

#: ../src/fs.c:2552
msgid "Seconds between data updates for local mounted file systems"
msgstr "Sekunder mellem opdatering af data for lokalt monterede fil systemer"

#: ../src/fs.c:2557
msgid "Seconds between data updates for remote mounted file systems"
msgstr "Sekunder mellem opdatering af data for eksternt monterede fil systemer"

#: ../src/fs.c:2561 ../src/mem.c:1371
msgid "Format String for Panel Labels"
msgstr "Format streng for panel beskrivelser"

#: ../src/fs.c:2588
msgid "File System"
msgstr "Fil System"

#: ../src/gui.c:403
#, c-format
msgid "%s command"
msgstr "%s kommando"

#: ../src/gui.c:421
msgid "comment"
msgstr "kommentar"

#: ../src/gui.c:770
#, c-format
msgid ""
"GKrellM %d.%d.%d%s\n"
"GNU Krell Monitors\n"
"\n"
"Copyright (c) 1999-2010 by Bill Wilson\n"
"billw@gkrellm.net\n"
"http://gkrellm.net\n"
"\n"
"Released under the GNU General Public License"
msgstr ""
"GKrellM %d.%d.%d%s\n"
"GNU Krell Monitors\n"
"\n"
"Copyright (c) 1999-2010 by Bill Wilson\n"
"billw@gkrellm.net\n"
"http://gkrellm.net\n"
"\n"
"Udgivet under GNU General Public Licensen"

#: ../src/gui.c:786
msgid ""
"Mac OS X code was contributed by:\n"
"Ben Hines <bhines@alumni.ucsd.edu>\n"
"and\n"
"Hajimu UMEMOTO <ume@mahoroba.org>"
msgstr ""
"Mac OS X kode bidraget af:\n"
"Ben Hines <bhines@alumni.ucsd.edu>\n"
"og\n"
"Hajimu UMEMOTO <ume@mahoroba.org>"

#: ../src/gui.c:796
msgid ""
"FreeBSD system dependent code was contributed by:\n"
"Hajimu UMEMOTO <ume@mahoroba.org>"
msgstr ""
"FreeBSD system afh<66>ngig kode bidraget af:\n"
"Hajimu UMEMOTO <ume@mahoroba.org>"

#: ../src/gui.c:804
msgid ""
"DragonFly system dependent code was contributed by:\n"
"Joerg Sonnenberger <joerg@bec.de>"
msgstr ""

#: ../src/gui.c:812
msgid ""
"NetBSD system dependent code was contributed by:\n"
"Anthony Mallet <anthony.mallet@useless-ficus.net>"
msgstr ""
"NetBSD system afh<66>ngig kode bidraget af:\n"
"Anthony Mallet <anthony.mallet@useless-ficus.net>"

#: ../src/gui.c:820
msgid ""
"Solaris system dependent code was contributed by:\n"
"Daisuke Yabuki <dxy@acm.org>"
msgstr ""
"Solaris system afh<66>ngig kode bidraget af:\n"
"Daisuke Yabuki <dxy@acm.org>"

#: ../src/gui.c:828
msgid ""
"Windows system dependent code was contributed by:\n"
"Bill Nalen <bill@nalens.com>\n"
"Stefan Gehn <stefan+gkrellm@srcbox.net>\n"
msgstr ""

#: ../src/gui.c:996
msgid "<h>Krells\n"
msgstr "<h>Krells\n"

#: ../src/gui.c:997
msgid ""
"Krells are the horizontally moving indicators below each chart and\n"
"on meter style monitors.  Depending on the monitor, they show fast\n"
"response data rates, a percentage of some capacity, or something else.\n"
msgstr ""
"Krells er de horisontale indikatorer under hver graf og p<>\n"
"m<>ler stil grafer. Afh<66>ngig af overv<72>gnigen, viser disse hurtige\n"
"data rater, en procentdel af en kapacitet, eller noget lignende.\n"

#: ../src/gui.c:1001
msgid "<h>Charts\n"
msgstr "<h>Grafer\n"

#: ../src/gui.c:1002
msgid ""
"The default for most charts is to automatically adjust the number of\n"
"grid lines drawn and the resolution per grid so drawn data will be\n"
"nicely visible.  You may change this to fixed grids of 1-5 and/or\n"
"fixed grid resolutions in the chart config windows.  However,\n"
"some combination of the auto scaling modes may give best results.\n"
msgstr ""
"Standarden for de fleste grafer er at automatisk at justere antallet\n"
"af indelinger og opl<70>sningen per indeling er vist s<>ledes at data\n"
"altid presenteres bedst muligt. Du kan <20>ndre dette til fikserede indelinger\n"
"af 1-5 og/eller fikserede indelings opl<70>sning i grafens konfigurations\n"
"vindue. I de fleste tilf<6C>lde vil auto skalering dog give de bedste "
"resultater.\n"

#: ../src/gui.c:1008 ../src/gui.c:1034 ../src/sensors.c:2908
msgid "See the README or do a \"man gkrellm\" for more information.\n"
msgstr "See README file eller udf<64>r \"man gkrellm\" for mere information.\n"

#: ../src/gui.c:1011
msgid "Chart label format strings place text on charts using position codes:\n"
msgstr ""
"Graf beskrivelses format strenge placerer tekst p<> grafer ved at bruge\n"
"f<>lgende positions koder:\n"

#: ../src/gui.c:1012
msgid "\t\\t    top left\n"
msgstr "\t\\t    <20>verst venstre\n"

#: ../src/gui.c:1013
msgid "\t\\b    bottom left\n"
msgstr "\t\\b    nederst venstre\n"

#: ../src/gui.c:1014
msgid "\t\\n    next line\n"
msgstr "\t\\n    n<>ste linie\n"

#: ../src/gui.c:1015
msgid "\t\\N    next line only if last string had visible characters\n"
msgstr ""
"\t\\N    n<>ste linie kun hvis den forrige streng havde synlige bogstaver\n"

#: ../src/gui.c:1016
msgid "\t\\p    previous line\n"
msgstr "\t\\p    forrige linie\n"

#: ../src/gui.c:1017
msgid "\t\\c    center the text\n"
msgstr "\t\\c    centrer teksten\n"

#: ../src/gui.c:1018
msgid "\t\\C    begin drawing text at the center\n"
msgstr "\t\\C    start teksten i center\n"

#: ../src/gui.c:1019
msgid "\t\\r    right justify\n"
msgstr "\t\\r    h<>jrestillet\n"

#: ../src/gui.c:1020
msgid "\t\\f    use alternate font for the next string\n"
msgstr "\t\\f    anvend alternativ skrifttype for den efterf<72>lgende streng\n"

#: ../src/gui.c:1021
msgid "\t\\w    use the following string to define a field width\n"
msgstr "\t\\w    anvend den efterf<72>lgende streng til at angive felt bredde\n"

#: ../src/gui.c:1022
msgid "\t\\a    draw left justified in the defined field width\n"
msgstr "\t\\a    tegn venstrestillet i den definered felt bredde\n"

#: ../src/gui.c:1023
msgid "\t\\e    draw right justified in the defined field width\n"
msgstr "\t\\e    tegn h<>jrestillet i den definerede felt bredde\n"

#: ../src/gui.c:1024
msgid "\t\\.     no-op.  Used to break a string into two strings.\n"
msgstr "\t\\.     no-op.  Anvendes til at bryde en streng i to stykker\n"

#: ../src/gui.c:1025
msgid ""
"\t\\D0   bottom of charts first data view (D2 for second data view ...)\n"
msgstr ""
"\t\\D0   bunden af grafens f<>rste data vindue (D2 for anden data "
"visning ...)\n"

#: ../src/gui.c:1026
msgid "\t\\D1   top of charts first data view (D3 for second data view ...)\n"
msgstr ""
"\t\\D1   toppen af grafens f<>rste data vindue (D3 for andet data "
"vindue ...)\n"

#: ../src/gui.c:1028
msgid ""
"<h>\n"
"Commands\n"
msgstr "Kommandoer\n"

#: ../src/gui.c:1029
msgid ""
"\tMany monitors can be configured to launch commands.  Just enter the\n"
"\tcommand where you see a \"command\" entry and also a comment if you\n"
"\twant a tooltip to appear for the command.  After a command is entered,\n"
"\tfor a monitor, a button for launching it will become visible when you\n"
"\tmove the mouse into the panel area of the monitor.\n"
"\n"
msgstr ""
"\tMange overv<72>gninger kan konfigureres til at starte programmer. Indtast "
"den\n"
"\t<>nskede kommando hvor du kan se et \"kommando\" felt og en kommentar\n"
"\ts<74>fremt du <20>nsker et tool-tip vist for kommandoen. Efter kommandoer er\n"
"\tindtastet for en overv<72>gning vil en knap blive vist n<>r muse pilen "
"flyttes\n"
"\tind i panelet p<> overv<72>geren.\n"
"\n"

#: ../src/gui.c:1037 ../src/mail.c:3888
msgid ""
"<h>\n"
"Mouse Button Actions:\n"
msgstr "Muse knap funktioner:\n"

#: ../src/gui.c:1039
msgid "clicking on charts will toggle a display of some extra info.\n"
msgstr "klik p<> en graf will skifte til visgning af ekstra information.\n"

#: ../src/gui.c:1040 ../src/gui.c:1042
msgid "<b>\tRight "
msgstr "<b>\tH<74>jre "

#: ../src/gui.c:1041
msgid "clicking on charts brings up a chart configuration window.\n"
msgstr "klik p<> en graf viser grafens konfigurations vindue.\n"

#: ../src/gui.c:1043
msgid "clicking on many panels opens its monitor configuration window.\n"
msgstr ""
"klik p<> mange af panelerne <20>bner overv<72>gnings konfigurations vinduet.\n"

#: ../src/gui.c:1072
msgid "Hostname display"
msgstr "V<>rtsnavn visning"

#: ../src/gui.c:1078
msgid "Short hostname"
msgstr "Kort v<>rtsnavn"

#: ../src/gui.c:1083
msgid "System name display"
msgstr "Systemnavn visning"

#: ../src/gui.c:1088
msgid "Remember screen location at exit and move to it at next startup"
msgstr "Husk position ved afslutning"

#: ../src/gui.c:1094
msgid "Allow multiple instances"
msgstr "Tillad flere instanser"

#: ../src/gui.c:1101
msgid ""
"Make gkrellm a topmost window (restart gkrellm for this to take effect)."
msgstr ""
"G<>r gkrellm til et top vindue (genstart gkrellm for at dette skal tage "
"effekt)."

#: ../src/gui.c:1110 ../src/hostname.c:400
msgid "gkrellmd server disconnect"
msgstr "gkrellmd server forbindelse afbrudt"

#: ../src/gui.c:1118
msgid "Krell and LED updates per second."
msgstr "Krell og LED opdatering per sekund."

#: ../src/gui.c:1124
msgid "GKrellM width"
msgstr "GKrellM bredde"

#: ../src/gui.c:1128
msgid "Properties"
msgstr "Egenskaber"

#: ../src/gui.c:1131
msgid "Set sticky state"
msgstr "Aktiv<69>r kl<6B>brig tilstand"

#: ../src/gui.c:1134
msgid "Set on top of other windows of the same type"
msgstr "Aktiv<69>r at s<>tte top over vinduer af samme type"

#: ../src/gui.c:1137
msgid "Set below other windows of the same type"
msgstr "Aktiv<69>r at s<>tte under vinduer af samme type"

#: ../src/gui.c:1144
msgid "Set window type to be a dock or panel"
msgstr "Aktiv<69>r at s<>tte vindue type til dock eller panel"

#: ../src/gui.c:1149
msgid "Use window manager decorations"
msgstr "Anvend vinduesh<73>ndtering dekorationer"

#: ../src/gui.c:1153
msgid "Do not include on a taskbar"
msgstr "Vis ikke i process linien"

#: ../src/gui.c:1157
msgid "Do not include on a pager"
msgstr "Vis ikke i side-skifter"

#: ../src/gui.c:1167
msgid ""
"Some of these properties require a standards compliant window manager.\n"
"You may have to restart gkrellm for them to take effect.\n"
msgstr ""
"Nogle af disse egenskaber kr<6B>ver en vindues h<>ndtering der overholder visse "
"standarder.\n"
"Nogle gange er det n<>dvendigt at genstarte gkrellm for at <20>ndringer tr<74>der i "
"kraft.\n"

#: ../src/gui.c:1575
#, c-format
msgid "%d total theme alternatives"
msgstr "%d total antal tema alternativer"

#: ../src/gui.c:1874 ../src/gui.c:1906
msgid "Theme"
msgstr "Tema"

#: ../src/gui.c:1878
msgid "Theme:"
msgstr "Tema:"

#: ../src/gui.c:1888
msgid "Author:"
msgstr "Forfatter:"

#: ../src/gui.c:1934
msgid "Track Gtk theme changes for similarly named themes"
msgstr "F<>lg Gtk tema <20>ndringer for temaer med lignende navne"

#: ../src/gui.c:1941
msgid "Default"
msgstr "Standard"

#: ../src/gui.c:1956
msgid "Scale"
msgstr "Skala"

#: ../src/gui.c:1962
msgid "Fonts"
msgstr "Skrifttyper"

#: ../src/gui.c:1965
msgid "Large font"
msgstr "Stor type"

#: ../src/gui.c:1977 ../src/gui.c:1991 ../src/gui.c:2004
msgid "Browse"
msgstr "Gennemse"

#: ../src/gui.c:1979
msgid "Normal font"
msgstr "Normal type"

#: ../src/gui.c:1993
msgid "Small font"
msgstr "Lille type"

#: ../src/gui.c:2008
#, c-format
msgid "Untar your theme tar files in %s/%s"
msgstr "Udpak dine tema tar filer i %s/%s"

#: ../src/gui.c:2017
msgid "Download themes from the GKrellM theme site at www.muhri.net"
msgstr "Download temaer fra GKrellM tema hjemmesiden www.muhri.net"

#: ../src/gui.c:2311
msgid "Configuration"
msgstr "Konfiguration"

#: ../src/gui.c:2339
msgid "General"
msgstr "Generel"

#: ../src/gui.c:2344
msgid "Builtins"
msgstr "Indbyggede"

#: ../src/gui.c:2364 ../src/plugins.c:1733
msgid "Plugins"
msgstr "Moduler"

#: ../src/gui.c:2369
msgid "Themes"
msgstr "Temaer"

#: ../src/gui.c:2374
msgid "About"
msgstr "Om"

#: ../src/gui.c:2399
msgid "Monitors"
msgstr "Overv<72>gninger"

#: ../src/gui.c:2471 ../src/gui.c:2482
msgid "/Quit"
msgstr "/Afslut"

#: ../src/gui.c:2478
msgid "/Configuration"
msgstr "/Konfiguration"

#: ../src/gui.c:2479
msgid "/Theme/Prev"
msgstr "/Tema/Forrige"

#: ../src/gui.c:2480
msgid "/Theme/Next"
msgstr "/Tema/N<>ste"

#: ../src/gui.c:2489
msgid "/Theme prev"
msgstr "/Tema forrige"

#: ../src/gui.c:2490
msgid "/Theme next"
msgstr "/Tema n<>ste"

#: ../src/inet.c:628
#, c-format
msgid "%s Connections"
msgstr "%s forbindelser"

#: ../src/inet.c:719
msgid "No current connections."
msgstr "Ingen forbindelser."

#: ../src/inet.c:946
#, c-format
msgid "inet%d"
msgstr "inet%d"

#: ../src/inet.c:958
msgid "TCP hits per minute"
msgstr "TCP forbindelers per minut"

#: ../src/inet.c:961
msgid "TCP hits per hour"
msgstr "TCP forbindelser per time"

#: ../src/inet.c:1792
msgid ""
"Inet charts show historical TCP port hits on a minute or hourly\n"
"chart. Below the chart there is a strip where marks are drawn for\n"
"port hits in second intervals.   The inet krell has a full scale\n"
"value of 5 hits and samples once per second.  The extra info\n"
"display shows current TCP port connections.\n"
"\n"
"For each internet monitor, you can specify two labeled data sets with\n"
"one or two non-zero port numbers entered for each data set.  Two\n"
"ports are allowed because some internet ports are related and you\n"
"might want to group them.  Check /etc/services for port numbers.\n"
"\n"
"For example, if you created an inet monitor:\n"
msgstr ""
"Inet grafer viser historiske TCP port forbindelser per minut eller time.\n"
"Under grafen er der en stribe hvor der vises markering for port "
"forbindelser\n"
"i sekund intervaller. Inet krell har en full skala v<>rdi af 5 og opsamling "
"en gang\n"
"per sekund. Extraf information der vises er de aktuelle TCP port "
"forbindelser.\n"
"\n"
"For hver enkelt internet overv<72>gning, kan du specificere two data s<>t with\n"
"enten en eller two port numre (som ikke er nul). To porte er tilladt\n"
"fordi nogle internet porte er besl<73>gtede og du <20>nsker m<>ske at gruppere "
"dem.\n"
"Se i /etc/services for de enkelte port numres funktion og beskrivelse.\n"
"\n"
"For eksempel hvis du opretter en inet overv<72>gning:\n"

#: ../src/inet.c:1803
msgid "<i>\thttp 80 8080   ftp 21\n"
msgstr "<i>\thttp 80 8080   ftp 21\n"

#: ../src/inet.c:1805
msgid ""
"Http hits on the standard http port 80 and www web caching service\n"
"on port 8080 are combined and plotted in the one color.  Ftp hits\n"
"on the single ftp port 21 are plotted in another color.\n"
"\n"
msgstr ""
"Http forbindelser p<> standard http port 80 og www web cache service\n"
"p<> port 8080 bliver kombineret og vist i en farve. Ftp forbindelser\n"
"p<> den enkelte ftp port 21 bliver vist i en anden farve.\n"

#: ../src/inet.c:1809
msgid ""
"If the range button is checked, then all port numbers between Port0 and\n"
"Port1 are monitored and included in the plot.\n"
"\n"
msgstr ""
"Hvis interval knappen er aktiv, s<> vil alle port numre mellem Port0 og\n"
"Port1 bliver overv<72>get og inkluderet i grafen.\n"
"\n"

#: ../src/inet.c:1815
msgid "\t$a    current active connections for Data0\n"
msgstr "\t$a    aktuelle aktive forbindelser for Data0\n"

#: ../src/inet.c:1816
msgid "\t$cN   total connections in last N minutes (or hours) for Data0\n"
msgstr ""
"\t$cN   total antal forbindelser for de sidste N minutter (eller timer) for "
"Data0\n"

#: ../src/inet.c:1817
msgid "\t$l    label for Data0\n"
msgstr "\t$l    beskrivelse for Data0\n"

#: ../src/inet.c:1818
msgid "\t$A    current active connections for Data1\n"
msgstr "\t$A    aktuelle antal forbindelser for Data1\n"

#: ../src/inet.c:1819
msgid "\t$CN   total connections in last N minutes (or hours) for Data1\n"
msgstr ""
"\t$CN   total antal forbindelser for de sidste N minutter (eller timer) for "
"Data1\n"

#: ../src/inet.c:1820
msgid "\t$L    label for Data1\n"
msgstr "\t$L    beskrivelse for Data1\n"

#: ../src/inet.c:1825
msgid ""
"click on an inet chart to toggle the extra info display of\n"
"\t\tcurrent TCP port connections.\n"
msgstr ""
"klik p<> en inet graf for at aktivere den ekstra information\n"
"\t\tvisning af aktuell TCP port forbindelser.\n"

#: ../src/inet.c:1828
msgid "click on an inet chart to toggle hour/minute charts.\n"
msgstr "klik p<> en inet graf for skifte mellem timer/minutter grafer.\n"

#: ../src/inet.c:1855
msgid "Ports"
msgstr "Porte"

#: ../src/inet.c:1861
msgid "Data0"
msgstr "Data0"

#: ../src/inet.c:1865
msgid "Data1"
msgstr "Data1"

#: ../src/inet.c:1875 ../src/inet.c:1881 ../src/inet.c:1969 ../src/inet.c:1989
msgid "Port0"
msgstr "Port0"

#: ../src/inet.c:1877 ../src/inet.c:1883 ../src/inet.c:1974 ../src/inet.c:1994
msgid "Port1"
msgstr "Port1"

#: ../src/inet.c:1915 ../src/inet.c:1920
msgid "Port0 - Port1 is a range"
msgstr "Port0 - Port1 er et interval"

#: ../src/inet.c:2067
msgid "Internet"
msgstr "Internet"

#: ../src/krell.c:961
msgid "create_krell: NULL image or style\n"
msgstr "create_krell: NUL billede eller stil\n"

#: ../src/mail.c:733
msgid "Unable to connect."
msgstr "Kan ikke forbinde."

#: ../src/mail.c:734
msgid "Bad response after connect."
msgstr "Forkert svar efter forbindelse"

#: ../src/mail.c:735
msgid "Bad response after username."
msgstr "Forkert svar efter brugernavn"

#: ../src/mail.c:736
msgid "Bad response after password."
msgstr "Forkert svar efter adgangskode"

#: ../src/mail.c:737
msgid "Bad response after STAT or STATUS."
msgstr "Forkert svar efter STAT eller STATUS."

#: ../src/mail.c:738
msgid "Bad response after UIDL."
msgstr "Forkert svar efter UDIL."

#: ../src/mail.c:739
msgid "Bad APOP response after connect."
msgstr "Forkert APOP svar efter forbindelse."

#: ../src/mail.c:740
msgid "Bad CRAM_MD5 response after connect."
msgstr "Forker CRAM_MD5 svar efter forbindelse."

#: ../src/mail.c:788
#, c-format
msgid "Mail TCP Error: %s - %s\n"
msgstr "Mail TCP Fejl: %s - %s\n"

#: ../src/mail.c:819
msgid "Cannot initialize SSL method."
msgstr "Kan ikke initialisere SSL metode."

#: ../src/mail.c:823
msgid "Cannot initialize SSL server certificate handler."
msgstr "Kan ikke initialisere SSL server certifikat h<>ndtering."

#: ../src/mail.c:829
msgid "Cannot initialize SSL handler."
msgstr "Kan ikke initialisere SSL h<>ndtering."

#: ../src/mail.c:955 ../src/mail.c:1027
msgid "could not decode BASE64 challenge\n"
msgstr "kunne ikke dekode BASE64 udfordring\n"

#: ../src/mail.c:962
#, c-format
msgid "decoded as %s\n"
msgstr "dekodet som %s\n"

#: ../src/mail.c:1079
msgid "Bad response after STLS."
msgstr "Forkert svar efter STLS."

#: ../src/mail.c:1254
msgid "Bad response after STARTTLS."
msgstr "Forkert svar efter STARTTLS."

#: ../src/mail.c:1272
msgid "Bad response after CAPABILITY."
msgstr ""

#: ../src/mail.c:1834
#, c-format
msgid "mute"
msgstr "stille"

#: ../src/mail.c:2109
msgid "seen"
msgstr "set"

#: ../src/mail.c:3573
msgid "GKrellM Config Error"
msgstr "GKrellM konfigurations fejl"

#: ../src/mail.c:3574
msgid "Incomplete mailbox entries"
msgstr "Ukomplette mailbox linier"

#: ../src/mail.c:3838
msgid "<h>Mailboxes\n"
msgstr "<h>Mail konti\n"

#: ../src/mail.c:3840
msgid "Mailboxes to monitor can be local or remote mailbox types.\n"
msgstr ""
"Mail kontoer der overv<72>ges kan enten v<>re lokale eller fjerne mail konto "
"typer.\n"

#: ../src/mail.c:3841
msgid ""
"For local mailboxes, the path name may be a mbox file or it may be\n"
"a Maildir or MH mail style directory.\n"
msgstr ""
"For lokale mail konti, kan stien pege p<> en mbox fil eller\n"
"en Maildir eller MH mail type folder.\n"

#: ../src/mail.c:3849
msgid "<b>Mail reading program\n"
msgstr "<b>Mail program\n"

#: ../src/mail.c:3850
msgid ""
"If you enter a mail reading program (your mail user agent or MUA)\n"
"it can be launched by clicking on the mail monitor message count button.\n"
msgstr ""
"Hvis du indtaster et mail program (mail agent eller MUA)\n"
"kan det startes ved at klikke p<> mail overv<72>gningens besked t<>ller knap.\n"

#: ../src/mail.c:3853
msgid "<b>Sound notify program\n"
msgstr "<b>Lyd besked program\n"

#: ../src/mail.c:3854
msgid ""
"If you enter a notify (sound) command, it will be run when new mail\n"
"is detected.\n"
msgstr ""
"S<>fremt du indtaster en besked kommando, vil dette k<>re n<>r ny post\n"
"er fundet\n"

#: ../src/mail.c:3861
msgid "<b>fetch/check Program\n"
msgstr "<b>hent/tjek program\n"

#: ../src/mail.c:3862
msgid ""
"If you want to download remote mail or check for remote mail without\n"
"using the builtin POP3 or IMAP mail checking which is set up in the\n"
msgstr ""
"S<>fremt du anvender et program til at hente eller checke ekstern post\n"
"uden at anvende de indbyggede POP3 eller IMAP protokoller som er sat op i\n"

#: ../src/mail.c:3864 ../src/mail.c:3882
msgid "<i>Mailboxes"
msgstr "<i>Mail konti"

#: ../src/mail.c:3865
msgid ""
" tab, then do this by entering a mail fetch/check command.\n"
"For example, fetchmail can be run periodically to download mail\n"
"messages from a remote server to your local mailboxes where GKrellM\n"
"can count them.\n"
"\n"
"Or, GKrellM can read the output and report the results from some mail\n"
"checking programs which count remote or local messages.  If you enter\n"
"a command like this that checks mail without downloading, then you\n"
"must tell GKrellM this is the expected behaviour by selecting in the\n"
"Options tab:\n"
msgstr ""
" fanebladet, s<> indtast din hent/tjekke kommando.\n"
"F.eks., fetchmail kan k<>res periodisk for at hente post\n"
"fra en server til din lokale mail konto hvor GKrellM\n"
"s<> kan t<>lle beskederne.\n"
"\n"
"Eller GKrellM can l<>se udskriften fra et program der t<>ller antallet\n"
"af beskeder lokalt eller p<> en server. S<>fremt du anvender en kommando\n"
"der g<>re dette, skal du aktivere dette i fanebladet for Egenskaber:\n"

#: ../src/mail.c:3875
msgid "<i>\tFetch/check program checks messages only\n"
msgstr "<i>\tHent/tjek program t<>ller kun beskeder\n"

#: ../src/mail.c:3876
msgid ""
"For checking messages on a remote server, GKrellM can read the\n"
"output of the program "
msgstr ""
"For at tjekke beskeder p<> en server kan GKrellM l<>se udskriften\n"
"programmet "

#: ../src/mail.c:3878
msgid "<i>fetchmail -c"
msgstr "<i>fetchmail -c"

#: ../src/mail.c:3879
msgid " (you must append the -c).\n"
msgstr " (du skal tilf<6C>je -c).\n"

#: ../src/mail.c:3880
msgid ""
"But, do not combine these methods for the same mailbox!  If you enter a\n"
"POP3 mailbox in the "
msgstr ""
"NB. Du m<> ikke anvende denne metode for den samme mail konto. Hvis du "
"bruger\n"
"POP3 til at tjekke en mailbox"

#: ../src/mail.c:3883
msgid " tab, then don't check it again with fetchmail.\n"
msgstr " m<> du ikke tjekke den igen med fetchmail\n"

#: ../src/mail.c:3890
msgid "click the mail count button to launch the mail reading program.\n"
msgstr "klikker man p<> mail t<>ller knappen starter dette mail programmet.\n"

#: ../src/mail.c:3891
msgid "\t\tIf options permit, also stop animations and reset remote counts.\n"
msgstr ""
"\t\tHvis egenskaberne tillader det, stop animationer og nulstil eksterne "
"t<>llere.\n"

#: ../src/mail.c:3893
msgid ""
"click the envelope decal to force a mail check regardless of\n"
"\t\tany mute mode or inhibit mail checking option settings.\n"
msgstr ""
"click p<> konvelut ikonet for at tvinge et tjek af mail, uanset\n"
"\t\tindstilleng af Stille eller Forbyd mail tjek egenskaberne.\n"

#: ../src/mail.c:3896
msgid ""
"click the mail panel to toggle a mute mode which inhibits\n"
"\t\tthe sound notify program and optionally inhibits all mail\n"
"\t\tchecking.\n"
msgstr ""
"click p<> mail panelet for at skifte til Stille indstilling\n"
"\t\tsom bevirker at lyd besked programmet og valgfrit stopper\n"
"\t\talt mail tjek\n"

#: ../src/mail.c:3937
msgid "Enable Mailcheck"
msgstr "Tillad Mailtjek"

#: ../src/mail.c:3949
msgid "Mail reading program:"
msgstr "Mail program:"

#: ../src/mail.c:3964
msgid "Notify (sound) program:"
msgstr "Besked (lyd) program:"

#: ../src/mail.c:3981
msgid "Mail fetch/check program:"
msgstr "Mail hent/tjek program:"

#: ../src/mail.c:4000
msgid "Run fetch/check program at local interval"
msgstr ""

#: ../src/mail.c:4010
msgid "Check local mailboxes every"
msgstr "Tjek lokale mail konti hver"

#: ../src/mail.c:4017
msgid "seconds"
msgstr "sekunder"

#: ../src/mail.c:4023
msgid "Do remote checks every"
msgstr "Udf<64>r server tjek hver"

#: ../src/mail.c:4025
msgid "Check mail every"
msgstr "Tjek mail hver"

#: ../src/mail.c:4032
msgid "minutes"
msgstr "minutter"

#: ../src/mail.c:4035
msgid "Mailboxes"
msgstr "Mail konti"

#: ../src/mail.c:4051
msgid "Path name:"
msgstr "Sti navn:"

#: ../src/mail.c:4069
msgid "Server"
msgstr "Server:"

#: ../src/mail.c:4076
msgid "User name"
msgstr "Brugernavn:"

#: ../src/mail.c:4083
msgid "Password"
msgstr "Adgangskode"

#: ../src/mail.c:4091 ../src/mail.c:4183
msgid "Protocol"
msgstr "Protokol"

#: ../src/mail.c:4106
msgid "Use SSL"
msgstr "Anvend SSL"

#: ../src/mail.c:4114
msgid "No"
msgstr "Nej"

#: ../src/mail.c:4122
msgid "IMAP folder"
msgstr "IMAP folder"

#: ../src/mail.c:4132
msgid "Specify port"
msgstr "Angiv port"

#: ../src/mail.c:4151
msgid "Local mailbox"
msgstr "Lokal mail konto"

#: ../src/mail.c:4157
msgid "Remote mailbox"
msgstr "Server mail konto"

#: ../src/mail.c:4193
msgid "Mailbox"
msgstr "Mail konto"

#: ../src/mail.c:4204
msgid "Animation"
msgstr "Animation"

#: ../src/mail.c:4207
msgid "Animation Select"
msgstr "V<>lg animation"

#: ../src/mail.c:4212
msgid "None"
msgstr "Ingen"

#: ../src/mail.c:4215
msgid "Envelope"
msgstr "Konvolut"

#: ../src/mail.c:4220
msgid "Daemon"
msgstr "D<>mon"

#: ../src/mail.c:4222
msgid "Penguin"
msgstr "Pingvin"

#: ../src/mail.c:4226
msgid "Both"
msgstr "Begge"

#: ../src/mail.c:4239
msgid "Run animation continuously as long as there is a new mail count"
msgstr "K<>r animationen s<> l<>nge der er ny post"

#: ../src/mail.c:4246
msgid "Message Counting"
msgstr "T<>l beskeder"

#: ../src/mail.c:4251
msgid "new/total"
msgstr "nye/total"

#: ../src/mail.c:4255
msgid "new"
msgstr "nye"

#: ../src/mail.c:4259
msgid "do not count"
msgstr "t<>l ikke"

#: ../src/mail.c:4272
msgid "Fetch/check program checks messages only (see Mail Info tab)"
msgstr "Hent/tjek program t<>ller kun beskeder (see Mail Info faneblad)"

#: ../src/mail.c:4277
msgid "Reset remote message counts when message count button is pressed."
msgstr "Nulstil server besked t<>ller n<>r besked t<>ller knap bliv aktiveret"

#: ../src/mail.c:4282
msgid "Count accessed but unseen mail as new (if this status is available)"
msgstr ""
"T<>l antallet af tilg<6C>ede beskeder som ikke er l<>st som ny (s<>fremt denne "
"status er tilg<6C>ngelig)"

#: ../src/mail.c:4287
msgid "Mute mode inhibits all mail checking, not just notify (sound) program"
msgstr ""
"Stille indstilling stopper alt mail tjek, ikke kun besked (lyd) program"

#: ../src/mail.c:4292
msgid "Inhibit all mail checking while the mail reader is running"
msgstr "Stop mail tjek medens mail program k<>rer"

#: ../src/mail.c:4297
msgid "Allow multiple launches of the mail reader program"
msgstr "Tillad flere instanser af mail program"

#: ../src/mail.c:4302
msgid "List mailboxes containing new mail in a tooltip"
msgstr "Vis mail konti der indeholder ny post i et tool-tip"

#: ../src/mail.c:4308
msgid "Ignore .mh_sequences when checking MH mail."
msgstr "Ignorer .mg_sequences n<>r der tjekkes MH post."

#: ../src/mail.c:4331
msgid "Mail"
msgstr "Post"

#: ../src/main.c:135
msgid ""
"You can configure your monitors by right clicking on\n"
"the top frame of GKrellM or by hitting the F1 key\n"
"with the mouse in the GKrellM window.\n"
"\n"
"Read the Info pages in the config for setup help."
msgstr ""
"Du kan konfigurere dine overv<72>gere ved at h<>jre klikke\n"
"p<> top rammen af GKrellM eller ved at trykke p<> F1 tasten\n"
"\n"
"L<>s info sider i konfigurationen for at f<> hj<68>lp til ops<70>tningen."

#: ../src/main.c:174
msgid "Error: Could not load all fonts.\n"
msgstr "Fejl: Kunne ikke indl<64>se alle skrifttyperne.\n"

#: ../src/main.c:1704
msgid "GKrellM Introduction"
msgstr "GKrellm Introduktion"

#: ../src/main.c:1782
msgid ""
"usage: gkrellm [options]\n"
"options:\n"
msgstr ""

#: ../src/main.c:1784
msgid "   -t, --theme theme_dir    Select a theme directory.\n"
msgstr ""

#: ../src/main.c:1785
msgid "   -g, --geometry +x+y      Position the window on the screen.\n"
msgstr ""

#: ../src/main.c:1786
msgid "       --wm                 Allow window manager decorations.\n"
msgstr ""

#: ../src/main.c:1787
msgid ""
"       --m2                 Left button side frame shading (for 2 btn "
"mice).\n"
msgstr ""

#: ../src/main.c:1788
msgid "       --nt                 No transparency.\n"
msgstr ""

#: ../src/main.c:1789
msgid "   -w, --withdrawn          Draw GKrellM in withdrawn mode.\n"
msgstr ""

#: ../src/main.c:1790
msgid ""
"   -c, --config suffix      Use alternate config files generated by\n"
"                            appending \"suffix\" to config file names.\n"
msgstr ""

#: ../src/main.c:1792
msgid ""
"   -f, --force-host-config  Creates config files generated by appending the\n"
"                            hostname to config file names.  Subsequent runs\n"
"                            automatically will use these configs unless a\n"
"                            specific config is specified with --config.\n"
"                            This is a convenience for allowing remote runs\n"
"                            with independent configs in a shared home dir\n"
"                            and for the hostname to be in the window title.\n"
"                            This option has no effect in client mode.\n"
msgstr ""

#: ../src/main.c:1800
msgid ""
"   -s, --server hostname    Run in client mode: connect to \"hostname\" and\n"
"                            read monitor data from a gkrellmd server.\n"
msgstr ""

#: ../src/main.c:1802
msgid ""
"   -P, --port server_port   Use \"server_port\" for the server connection.\n"
msgstr ""

#: ../src/main.c:1803
msgid ""
"       --nc                 No config mode prevents configuration changes.\n"
msgstr ""

#: ../src/main.c:1804
msgid "       --config-clean       Clean out unused configs on config write.\n"
msgstr ""

#: ../src/main.c:1805
msgid "       --nolock             Allow multiple gkrellm instances.\n"
msgstr ""

#: ../src/main.c:1806
msgid ""
"   -p, --plugin plugin.so   While developing, load your plugin under test.\n"
msgstr ""

#: ../src/main.c:1807
msgid ""
"       --demo               Force enabling of many monitors so themers can\n"
"                            see everything. All config saving is inhibited.\n"
msgstr ""

#: ../src/main.c:1810
msgid "   -v, --version            Print GKrellM version number and exit.\n"
msgstr ""

#: ../src/main.c:1811
msgid ""
"   -d, --debug-level n      Turn debugging on for selective code sections.\n"
msgstr ""

#: ../src/main.c:1813
msgid ""
"\n"
"debug-level numbers are (bitwise OR to debug multiple sections):\n"
"     0x10    mail\n"
"     0x20    net\n"
"     0x40    timer button\n"
"     0x80    sensors\n"
"     0x800   inet\n"
"     0x1000  dump gkrellmd server data\n"
"     0x2000  GUI\n"
"     0x8000  battery\n"
"     0x20000 plugin \n"
"\n"
msgstr ""

#: ../src/main.c:1832
msgid "GKrellM"
msgstr ""

#: ../src/main.c:2025
msgid "segmentation fault"
msgstr "segmenterings fejl"

#: ../src/main.c:2027
msgid "floating point exception"
msgstr "flydende tal fejl"

#: ../src/main.c:2029
msgid "aborted"
msgstr "afbrudt"

#: ../src/main.c:2032
msgid "initializing"
msgstr "initialiseret"

#: ../src/main.c:2217
#, c-format
msgid "Bad arg: %s\n"
msgstr "Forkert argument: %s\n"

#: ../src/mem.c:708
msgid "Swap Out"
msgstr "Swap ud"

#: ../src/mem.c:709
msgid "Swap In"
msgstr "Swap in"

#: ../src/mem.c:718
msgid "Swap in/out pages per sec"
msgstr "Swap ind/ud sider per sek"

#: ../src/mem.c:827 ../src/mem.c:1391 ../src/mem.c:1422
msgid "Mem"
msgstr "Mem"

#: ../src/mem.c:903 ../src/mem.c:996 ../src/mem.c:1310 ../src/mem.c:1412
#: ../src/mem.c:1429
msgid "Swap"
msgstr "Swap"

#: ../src/mem.c:994 ../src/mem.c:1328 ../src/mem.c:1452
msgid "Memory"
msgstr "Hukommelse"

#: ../src/mem.c:1247
msgid "<h>Used and Free\n"
msgstr "<h>Brug og Fri\n"

#: ../src/mem.c:1248
msgid ""
"The used and free memory here are calculated from the kernel reported\n"
"used and free by subtracting or adding the buffers and cache memory.  See\n"
"the README and compare to the \"-/+ buffers/cache:\" line from the free\n"
"command.  If you show three memory krells, the kernel \"raw free\" is\n"
"the space after the rightmost krell.\n"
msgstr ""
"Brugt og fri hukommelse bliver beregnet fra kernens v<>rdier for brugt og "
"fri\n"
"ved at addere eller subtrahere v<>rdierne for buffere og cache hukommelse. "
"Se\n"
"i README filen og sammenlign \"-/+ buffers/cache:\" linien fra kommandoen "
"'free'\n"
"Vis du viser 3 hukommelses krells, s<> er kernenes \"raw free\" omr<6D>det "
"efter\n"
"den krell l<>ngst til h<>jre.\n"

#: ../src/mem.c:1257
msgid "\t$T    total swap in blocks + swap out blocks\n"
msgstr "\t$T    total swap i blokke + swap ud blokke\n"

#: ../src/mem.c:1258
msgid "\t$i    swap in blocks\n"
msgstr "\t$i    swap ind blokke\n"

#: ../src/mem.c:1259
msgid "\t$o    swap out blocks\n"
msgstr "\t$o    swap ud blokke\n"

#: ../src/mem.c:1262
msgid ""
"Substitution variables for the format string for the Mem and Swap\n"
"panels (a MiB is a binary megabyte - 2^20):\n"
msgstr ""
"Erstatnings variabler til format strengen for Mem og Swap\n"
"panelern (en MiB er en bin<69>r megabyte - 2^20):\n"

#: ../src/mem.c:1265
msgid "For memory and swap:\n"
msgstr "For hukommelse og swap:\n"

#: ../src/mem.c:1266
msgid "\t$t    total MiB\n"
msgstr "\t$t    total MiB\n"

#: ../src/mem.c:1267
msgid "\t$u    used MiB\n"
msgstr "\t$u    brugt MiB\n"

#: ../src/mem.c:1268
msgid "\t$f    free MiB\n"
msgstr "\t$f    fri MiB\n"

#: ../src/mem.c:1269
msgid "\t$U    used %\n"
msgstr "\t$U    % brugt\n"

#: ../src/mem.c:1271
msgid "\t$l    the panel label"
msgstr "\t$l    panel beskrivelse"

#: ../src/mem.c:1273
msgid "For memory only:\n"
msgstr "Kun til hukommelse:\n"

#: ../src/mem.c:1274
msgid "\t$s    shared MiB\n"
msgstr "\t$s    delt MiB\n"

#: ../src/mem.c:1275
msgid "\t$b    buffered MiB\n"
msgstr "\t$b    buffer MiB\n"

#: ../src/mem.c:1276
msgid "\t$c    cached MiB\n"
msgstr "\t$c    cache MiB\n"

#: ../src/mem.c:1278
msgid ""
"The free and used variables may have a 'r' qualifier for printing\n"
"raw free and raw used values.  For example: $fr for raw free.\n"
msgstr ""

#: ../src/mem.c:1286
msgid ""
"click on a panel to scroll a programmable display of\n"
"\t\tof memory or swap usage.\n"
msgstr ""
"klik p<> et panel for at rulle den programmerbare visning\n"
"\t\taf hukommelse og swap forbrug.\n"

#: ../src/mem.c:1315
msgid "Enable swap pages in/out chart"
msgstr "Aktiv<69>r swap sider ind/ud graf"

#: ../src/mem.c:1321
msgid "Enable swap meter"
msgstr "Aktiv<69>r swap m<>ler"

#: ../src/mem.c:1335
msgid "Enable memory meter"
msgstr "Aktiv<69>r hukommelses m<>ler"

#: ../src/mem.c:1343
msgid "Show three memory krells:   [used | buffers | cache | raw free]"
msgstr "Vis 3 hukommelses krells:   [used | buffers | cache | raw free]"

#: ../src/mem.c:1386
msgid "$t - $u used  $s sh  $b bf  $c ca"
msgstr "$t - $u used  $s sh  $b bf  $c ca"

#: ../src/net.c:687
msgid "Received"
msgstr ""

#: ../src/net.c:691
msgid "Transmitted"
msgstr ""

#: ../src/net.c:695
msgid "Total"
msgstr "Total"

#: ../src/net.c:703
msgid "Connect Time"
msgstr "Tilkoblet tid"

#: ../src/net.c:720
#, c-format
msgid "%s Statistics"
msgstr ""

#: ../src/net.c:740
msgid "Daily"
msgstr ""

#: ../src/net.c:741
msgid "Date"
msgstr ""

#: ../src/net.c:743
msgid "Weekly"
msgstr ""

#: ../src/net.c:745
msgid "Week Ending"
msgstr ""

#: ../src/net.c:747
msgid "Monthly"
msgstr ""

#: ../src/net.c:749
msgid "Month"
msgstr "M<>ned"

#: ../src/net.c:806
#, c-format
msgid "get_connect_state changed from %d to %d  (check=%d)\n"
msgstr "get_connect_state <20>ndret fra %d til %d (tjek=%d)\n"

#: ../src/net.c:849
#, c-format
msgid "set_timer_button_state from %d to %d (check=%d)\n"
msgstr "set_timer_button_state fra %d til %d tjek=%d)\n"

#: ../src/net.c:862
#, c-format
msgid "update_timer_button net_timed old_state=%d new_state=%d\n"
msgstr "update_timer_button net_timed gammel_status=%d ny_status=%d\n"

#: ../src/net.c:923
msgid "  **** Stale pppd pppX.pid file detected!\n"
msgstr "  **** Gammel pppd pppX.pid file funder!\n"

#: ../src/net.c:1524 ../src/net.c:2752
msgid "tx bytes"
msgstr "tx bytes"

#: ../src/net.c:1525 ../src/net.c:2749
msgid "rx bytes"
msgstr "rx bytes"

#: ../src/net.c:1536
msgid "rx/tx bytes per sec"
msgstr "rx/tx bytes per sek"

#: ../src/net.c:2790 ../src/net.c:2979
msgid "none"
msgstr "ingen"

#: ../src/net.c:2883
msgid "<h>Timer Button\n"
msgstr "<h>Timer knap\n"

#: ../src/net.c:2884
msgid ""
"\tThe timer button may be used as a stand alone timer with start and\n"
"\tstop commands, but it is usually linked to a dial up net interface\n"
"\twhere the commands can control the interface and different timer\n"
"\tbutton colors can show connect states:\n"
msgstr ""
"\tTimer knappen kan anvendes som en timer med start og stop kommandoer,\n"
"\tmen er normalt knyttet til opkalds enheden hvor kommandoerne kan "
"kontrollere\n"
"\topkalds enheden og de forskellige timer knapper can vise forbindelses "
"status:\n"

#: ../src/net.c:2894
msgid ""
"Standby state is while the modem phone line is locked while\n"
"\tppp is connecting, and the on state is the ppp link connected.\n"
"\tThe phone line lock is determined by the existence of the modem\n"
"\tlock file /var/lock/LCK..modem.  If your pppd setup does not\n"
"\tuse /dev/modem, then you can configure an alternative with:\n"
msgstr ""
"Standby er den status modem linien er s<>l<EFBFBD>nge ppp er igang\n"
"\tmed at forbinde. T<>ndt status er n<>r ppp forbindelsen er oprettet.\n"
"\tL<74>sningen af telefon linien er afgjort p<> baggrund modem l<>se filen\n"
"\t/var/lock/LCK..modem. S<>fremt din pppd konfiguration ikke anvender\n"
"\t/dev/modem, s<> kan du konfigurere et alternativ med:\n"

#: ../src/net.c:2899
msgid "<i>\t\tln -s /var/lock/LCK..ttySx ~/.gkrellm2/LCK..modem\n"
msgstr "<i>\t\tln -s /var/lock/LCK..ttySx ~/.gkrellm2/LCK..modem\n"

#: ../src/net.c:2900
msgid ""
"\twhere ttySx is the tty device your modem uses.  The ppp on\n"
"\tstate is detected by the existence of /var/run/pppX.pid and\n"
"\tthe time stamp of this file is the base for the on line time.\n"
msgstr ""
"\thvor ttySx er den tty enhed dit modem anvender. Ppp tilkoblet status\n"
"\ter afgjort af tilstedev<65>relsen af filen /var/run/pppX.pid og\n"
"\ttidskoden p<> denne file anvendes for det tidspunkt du gik online.\n"

#: ../src/net.c:2906
msgid ""
"The timer button standby state is not applicable to isdn\n"
"\tinterfaces that are always routed. The on state is isdn on line\n"
"\twhile the ippp interface is routed.  The on line timer is reset\n"
"\twhen the isdn interface transitions from a hangup to an on line\n"
"\tstate\n"
msgstr ""
"Time knappes standby status virker ikke med isdn\n"
"\tenheder der altid er ruted. Forbindelses tilstanden s<> l<>nge\n"
"\tippp enheden er ruted. Online timeren bliver nulstillet\n"
"\tn<74>r isdn enheden g<>r fra offline til online status\n"

#: ../src/net.c:2921
msgid "\t$T    receive + transmit bytes\n"
msgstr "\t$T    modtaget + sendt bytes\n"

#: ../src/net.c:2922
msgid "\t$r    receive bytes\n"
msgstr "\t$r    modtaget bytes\n"

#: ../src/net.c:2923
msgid "\t$t    transmit bytes\n"
msgstr "\t$t    sendt bytes\n"

#: ../src/net.c:2924
msgid "\t$O    cumulative receive + transmit bytes\n"
msgstr "\t$O    akkumuleret modtaget + sendt bytes\n"

#: ../src/net.c:2925
msgid "\t$i    cumulative receive bytes\n"
msgstr "\t$i    akkumuleret modtaget bytes\n"

#: ../src/net.c:2926
msgid "\t$o    cumulative transmit bytes\n"
msgstr "\t$o    akkumuleret sendt bytes\n"

#: ../src/net.c:2927
msgid "\t$L    the optional chart label\n"
msgstr "\t$L    valgfri graf beksrivelse\n"

#: ../src/net.c:2928
msgid "\t$I    the net interface name\n"
msgstr "\t$I    netv<74>rks enhedens navn\n"

#: ../src/net.c:2930
msgid ""
"The cumulative variables may have a 'd', 'w', or 'm' qualifier for\n"
"daily, weekly, or monthly totals.  For example:  $Ow for a\n"
"cumulative weekly receive + transmit bytes.\n"
msgstr ""
"De akkumulerede variable kan anvende 'd', 'w' eller 'm' for daglig,\n"
"ugentlig eller m<>nedlige totaler. F. eks. : $Ow for en\n"
"akkumuleret ugentlig modtaget + sendt bytes.\n"

#: ../src/net.c:2956
msgid "Timer Button"
msgstr "Timer Knap"

#: ../src/net.c:2962
msgid "Enable timer button"
msgstr "Aktiv<69>r timer knap"

#: ../src/net.c:2967
msgid "Show seconds"
msgstr "Vis sekunder"

#: ../src/net.c:2991
msgid "Interface to link to the timer button"
msgstr "Enhed der skal knyttes til timer knappen"

#: ../src/net.c:3002
msgid "Start Command"
msgstr "Start kommando"

#: ../src/net.c:3013
msgid "Stop Command"
msgstr "Stop kommando"

#: ../src/net.c:3027
#, c-format
msgid "Enable %s"
msgstr "Aktiv<69>r %s"

#: ../src/net.c:3044
msgid "Force chart to be always shown even if interface is not routed."
msgstr "Vis altid graf selvom enheden ikke er ruted."

#: ../src/net.c:3057
msgid "Optional label for this interface."
msgstr "Valgfri betegnelse for denne enhed."

#: ../src/net.c:3089
msgid "\\f\\ww\\c\\f$M\\n\\f\\at\\.$t\\n\\f\\ar\\.$r\\b\\c\\f$L"
msgstr "\\f\\ww\\c\\f$M\\n\\f\\at\\.$t\\n\\f\\ar\\.$r\\b\\c\\f$L"

#: ../src/net.c:3091
msgid "\\f\\ww\\c\\f$M\\n\\f\\at\\.$o\\n\\f\\ar\\.$i\\b\\c\\f$L"
msgstr "\\f\\ww\\c\\f$M\\n\\f\\at\\.$o\\n\\f\\ar\\.$i\\b\\c\\f$L"

#: ../src/net.c:3093
msgid "\\f\\ww\\c\\f$M\\D2\\f\\ar\\.$r\\D1\\f\\at\\.$t\\b\\c\\f$L"
msgstr "\\f\\ww\\c\\f$M\\D2\\f\\ar\\.$r\\D1\\f\\at\\.$t\\b\\c\\f$L"

#: ../src/net.c:3102
msgid "Start day for cumulative monthly transmit and receive bytes"
msgstr "Start dag for de akkumulerede m<>nedelige sendte og modtagne bytes"

#: ../src/net.c:3121
msgid "Net"
msgstr "Net"

#: ../src/net.c:3182
msgid "Net Timer"
msgstr "Net Timer"

#: ../src/plugins.c:834
#, c-format
msgid "\t%s: placement is %s %s  G:%d\n"
msgstr "\t%s: placering er %s %s  G:%d\n"

#: ../src/plugins.c:836
msgid "after"
msgstr "efter"

#: ../src/plugins.c:836
msgid "before"
msgstr "f<>r"

#: ../src/plugins.c:896 ../src/plugins.c:903 ../src/plugins.c:919
#, c-format
msgid "\tError: %s\n"
msgstr "\tFejl: %s\n"

#: ../src/plugins.c:938
msgid "\tOoops! plugin returned NULL, aborting\n"
msgstr "\tOoops! modul returnede NULL, afslutter\n"

#: ../src/plugins.c:950
msgid "\tWarning: style name \""
msgstr "\tAdvarsel: stil navn \""

#: ../src/plugins.c:951 ../src/plugins.c:961
msgid ""
"\" already used by:\n"
"\t\t"
msgstr ""
"\" allerede brugt af:\n"
"\t\t"

#: ../src/plugins.c:960
msgid "\tWarning: config keyword \""
msgstr "\tAdvarsel: konfigurations ord \""

#: ../src/plugins.c:1218
msgid "Ignoring duplicate plugin "
msgstr "Ignorerer duplikat modul "

#: ../src/plugins.c:1250
msgid "*** Command line plugin:\n"
msgstr "*** Kommando linie modul:\n"

#: ../src/plugins.c:1526
msgid "GKrellM Place Plugin"
msgstr "GKrellM Placering Modul"

#: ../src/plugins.c:1537
msgid "Builtin Monitors"
msgstr "Indbyggede overv<72>gere"

#: ../src/plugins.c:1567
msgid "Place Plugin"
msgstr "Placer Modul"

#: ../src/plugins.c:1573
msgid "Before selected builtin monitor"
msgstr "F<>r valgt indbygger overv<72>ger"

#: ../src/plugins.c:1580
msgid "With gravity"
msgstr "Med tyngdekraft"

#: ../src/plugins.c:1585
msgid "After selected builtin monitor"
msgstr "Efter valgt indbygget overv<72>ger"

#: ../src/plugins.c:1593
msgid "Plugin Defaults"
msgstr "Modul standard indstillinger"

#: ../src/plugins.c:1696
msgid "from command line"
msgstr "fra kommando linien"

#: ../src/plugins.c:1753
msgid "Plugin"
msgstr "Modul"

#: ../src/plugins.c:1774
msgid "Place"
msgstr "Placering"

#: ../src/plugins.c:1781
msgid "Install Log"
msgstr "Installations log"

#: ../src/plugins.c:1789
msgid "No plugins found."
msgstr "Ingen moduler fundet"

#: ../src/proc.c:556 ../src/proc.c:656 ../src/proc.c:948
msgid "Load"
msgstr "Belastning"

#: ../src/proc.c:559
msgid "Forks"
msgstr "Forgreninger"

#: ../src/proc.c:568
msgid "Average process load per minute"
msgstr "Gennemsnitlig proces belastning per minut"

#: ../src/proc.c:670 ../src/proc.c:941
msgid "Users"
msgstr "Brugere"

#: ../src/proc.c:682 ../src/proc.c:934
msgid "Processes"
msgstr "Processer"

#: ../src/proc.c:887
msgid "<h>Proc Chart"
msgstr "<h>Proc Graf"

#: ../src/proc.c:889
msgid "The krell shows process forks with a full scale value of 10 forks.\n"
msgstr ""
"krellen viser proces forgreninger med en fuld skala v<>rdi af 10 "
"forgreninger.\n"

#: ../src/proc.c:890
msgid ""
"While both load and fork data are drawn on the chart, the grid\n"
"resolution can be set for load only.  The resolution per grid for forks is\n"
"fixed at 10 when using the auto number of grids mode, and at 50 divided by\n"
"the number of grids when using a fixed number of grids mode.\n"
msgstr ""
"Medens b<>de belastning og forgrenings data bliver afbildet p<> grafen,\n"
"kan indelings opl<70>sningen s<>ttes for belastning alene. Indelings "
"opl<70>sningen\n"
"for forgreninger er l<>st p<> 10 n<>r indelinger st<73>r til auto, og den bliver\n"
"sat til 50 divideret med antalet af indeling n<>r et konstant antal "
"indelingen\n"
"anvendes.\n"

#: ../src/proc.c:897
msgid "\t$L    maximum chart value (load)\n"
msgstr "\t$L    maximum graf v<>rdi (belastning)\n"

#: ../src/proc.c:898
msgid "\t$F    maximum chart value (forks)\n"
msgstr "\t$F    maximum graf v<>rdi (forgreninger)\n"

#: ../src/proc.c:899
msgid "\t$l    load\n"
msgstr "\t$l    belastning\n"

#: ../src/proc.c:900
msgid "\t$f    forks\n"
msgstr "\t$f    forgreninger\n"

#: ../src/proc.c:901
msgid "\t$p    processes\n"
msgstr "\t$p    processer\n"

#: ../src/proc.c:902
msgid "\t$u    users\n"
msgstr "\t$u    brugere\n"

#: ../src/proc.c:922
msgid "Enable Proc chart"
msgstr "Aktiv<69>r Proc graf"

#: ../src/proc.c:971
msgid "\\f$L\\r\\f$F \\w88\\b\\p\\a$p\\f procs\\n\\e$u\\f users"
msgstr "\\f$L\\r\\f$F \\w88\\b\\p\\a$p\\f procs\\n\\e$u\\f users"

#: ../src/proc.c:982 ../src/proc.c:1011 ../src/proc.c:1038
msgid "Proc"
msgstr "Proc"

#: ../src/sensors.c:733
#, c-format
msgid "Can't find a %s panel to relocate sensor to."
msgstr "Kan ikke finde et %s panel at flytte sensoren til"

#: ../src/sensors.c:1620 ../src/sensors.c:2941
msgid "Sensors"
msgstr "Sensorer"

#: ../src/sensors.c:1692
msgid "Sensor Volt Limits"
msgstr "Sensorer Volt gr<67>nser"

#: ../src/sensors.c:1696
msgid "Sensor Temperature Limits (in displayed degree units)"
msgstr "Sensorer Temparatur g<>rnse (i viste grad enheder)"

#: ../src/sensors.c:1700
msgid "Sensor Fan RPM Limits"
msgstr "Sensorer Bl<42>ser RPM gr<67>nser"

#: ../src/sensors.c:2036 ../src/sensors.c:2838
msgid "Temperatures"
msgstr "Temperatur"

#: ../src/sensors.c:2043
msgid "Fans"
msgstr "Bl<42>ser"

#: ../src/sensors.c:2050 ../src/sensors.c:2851
msgid "Voltages"
msgstr "Volt"

#: ../src/sensors.c:2660
msgid ""
"Can't read sensor data from mbmon daemon.\n"
"Check mbmon port number and '-r' option.\n"
"Run gkrellm -d 0x80 for debug output.\n"
msgstr ""

#: ../src/sensors.c:2682
msgid "<b>No sensors detected.\n"
msgstr "<b>Ingen sensorer fundet.\n"

#: ../src/sensors.c:2689
msgid ""
"Enter data scaling factors and offsets for the sensors if the default\n"
"values are not correct for your motherboard.  Do a man gkrellm or\n"
"see the GKrellM README for more information.\n"
msgstr ""
"Indtast data skalerings faktorer and justering for sensorerne hvis\n"
"standard v<>rdier ikke er korrekte for dit motherboard. Konsulter man "
"gkrellm\n"
"eller GKrellM README filen.\n"

#: ../src/sensors.c:2692
msgid "Enter a zero factor and a blank label to restore default values.\n"
msgstr ""
"Indtast en nul faktor og en blank beskrivelse for at genskabe standard "
"indstillingen.\n"

#: ../src/sensors.c:2694
msgid "Drag and drop sensor rows to change the displayed order.\n"
msgstr "Tr<54>k og slip sensor r<>kker for at <20>ndre visnings r<>kkef<65>lgen.\n"

#: ../src/sensors.c:2696
msgid "Temperature offset values must be in centigrade units.\n"
msgstr "Temperatur justering v<>rdier skal v<>re i celsius grader.\n"

#: ../src/sensors.c:2699
msgid "\t$s    current sensor value.\n"
msgstr "\t$s    aktuelle sensor v<>rdig\n"

#: ../src/sensors.c:2700
msgid "\t$l    sensor label.\n"
msgstr "\t$l    sensor beskrivelse\n"

#: ../src/sensors.c:2762
msgid "Sensor"
msgstr "Sensor"

#: ../src/sensors.c:2800
msgid "Factor"
msgstr "Faktor"

#: ../src/sensors.c:2805
msgid "Offset"
msgstr "Justering"

#: ../src/sensors.c:2810
msgid "Location"
msgstr "Lokation"

#: ../src/sensors.c:2842
msgid "Display fahrenheit"
msgstr "Vis fahrenheit"

#: ../src/sensors.c:2846
msgid "Show units"
msgstr ""

#: ../src/sensors.c:2853
msgid "Normal with labels"
msgstr "Normal med beskrivelser"

#: ../src/sensors.c:2863
msgid "Compact with no labels"
msgstr "Kompakt, ingen beskrivelser"

#: ../src/sensors.c:2888
msgid "MBmon Daemon Port"
msgstr ""

#: ../src/sensors.c:2893
msgid ""
"<small>Daemon command must be: <b>mbmon -r -P port</b>\n"
"where 'port' must match the port number entered here:</small>"
msgstr ""

#: ../src/uptime.c:282
msgid "Enable Uptime"
msgstr "Aktiv<69>r oppetid"

#: ../src/uptime.c:289 ../src/uptime.c:299
msgid "Uptime"
msgstr "Oppetid"

#: ../src/utils.c:117
msgid "Unterminated quote\n"
msgstr "Uafsluttet citat\n"

#: ../src/utils.c:233
#, c-format
msgid "Cannot create directory: %s\n"
msgstr "Kan ikke oprette katalog: %s\n"

#: ../src/winops-gtk-mac.c:133 ../src/winops-x11.c:387
msgid "Exiting because multiple instances option is off.\n"
msgstr "Afslutter fordi flere instanser ikke er tilladt.\n"

#: ../src/winops-x11.c:458
msgid "Warning: -w flag is ignored when the window dock type is set"
msgstr "Advaserl: -w flag bliver ignoreret n<>r vinduets dock type er sat"

#: ../src/sysdeps/linux.c:3877
msgid "Use nvclock for NVIDIA GPU temperatures"
msgstr ""

#~ msgid ""
#~ "Messages: %d\n"
#~ "Unseen: %d\n"
#~ msgstr ""
#~ "Beskeder: %d\n"
#~ "Ul<55>ste: %d\n"

#~ msgid "Display 24 hour instead of 12 hour time"
#~ msgstr "Vis 24 timer istedet for 12 timers ur"

#~ msgid "Show seconds instead of am/pm in 12 hour time mode"
#~ msgstr "Vis sekunder istedet for am/pm i 12 timers ur"

#~ msgid "Show seconds in 24 hour time mode"
#~ msgstr "Vis sekunder i 24 timers ur"

#~ msgid "Format string for FS data display"
#~ msgstr "Format streng for FS data visning"

#~ msgid ""
#~ "usage: gkrellm [options]\n"
#~ "options:\n"
#~ "   -t, --theme theme_dir    Select a theme directory.\n"
#~ "   -g, --geometry +x+y      Position the window on the screen.\n"
#~ "       --wm                 Allow window manager decorations.\n"
#~ "       --m2                 Left button side frame shading (for 2 btn "
#~ "mice).\n"
#~ "       --nt                 No transparency.\n"
#~ "   -w, --withdrawn          Draw GKrellM in withdrawn mode.\n"
#~ "   -c, --config suffix      Use alternate config files generated by\n"
#~ "                            appending \"suffix\" to config file names.\n"
#~ "   -f, --force-host-config  Creates config files generated by appending "
#~ "the\n"
#~ "                            hostname to config file names.  Subsequent "
#~ "runs\n"
#~ "                            automatically will use these configs unless "
#~ "a\n"
#~ "                            specific config is specified with --config.\n"
#~ "                            This is a convenience for allowing remote "
#~ "runs\n"
#~ "                            with independent configs in a shared home "
#~ "dir\n"
#~ "                            and for the hostname to be in the window "
#~ "title.\n"
#~ "                            This option has no effect in client mode.\n"
#~ "   -s, --server hostname    Run in client mode: connect to \"hostname\" "
#~ "and\n"
#~ "                            read monitor data from a gkrellmd server.\n"
#~ "   -P, --port server_port   Use \"server_port\" for the server "
#~ "connection.\n"
#~ "       --nc                 No config mode prevents configuration "
#~ "changes.\n"
#~ "   -p, --plugin plugin.so   While developing, load your plugin under "
#~ "test.\n"
#~ "       --demo               Force enabling of many monitors so themers "
#~ "can\n"
#~ "                            see everything. All config saving is "
#~ "inhibited.\n"
#~ "   -v, --version            Print GKrellM version number and exit.\n"
#~ "   -d, --debug-level n      Turn debugging on for selective code "
#~ "sections.\n"
#~ "\n"
#~ "debug-level numbers are (bitwise OR to debug multiple sections):\n"
#~ "     0x10  mail\n"
#~ "     0x20  net\n"
#~ "     0x40  timer button\n"
#~ "     0x80  sensors\n"
#~ "\n"
#~ msgstr ""
#~ "anvendelse: gkrellm [flag]\n"
#~ "   -t, --theme theme_dir    V<>lg tema folder.\n"
#~ "   -g, --geometry +x+y      Set position af vinduet p<> sk<73>rmen.\n"
#~ "       --wm                 Tillad vindue h<>ndterings dekorationer.\n"
#~ "       --m2                 Venstre knap oprullning (for 2 knaps mus)\n"
#~ "       --nt                 Ingen transparens\n"
#~ "   -w, --withdrawn          Vis GKrellM tilbagetrukken.\n"
#~ "   -c, --config suffix      Anvend alternativ konfigurations fil ved\n"
#~ "                            at tilf<6C>je \"suffix\" til konfigurations "
#~ "filens navn.\n"
#~ "   -f, --force-host-config  Opret konfigurations filter ved at tilf<6C>je\n"
#~ "                            v<>rtsnavnet til konfigurations filens navn. "
#~ "Efterf<72>lgende\n"
#~ "                            k<>rsler vil automatisk anvende disse, "
#~ "undtagen hvis\n"
#~ "                            en specifik konfigurationsfil angives med --"
#~ "config.\n"
#~ "                            Dette er til for at hj<68>lpe hvis man anveder "
#~ "fjern\n"
#~ "                            overv<72>gning med uafh<66>ngige konfiguration i en "
#~ "delt\n"
#~ "                            hjemme folder\n"
#~ "                            Dette flag har ingen effekt i klient "
#~ "indstilling.\n"
#~ "   -s, --server hostname    K<>r i klient indstilling: Forbind til "
#~ "\"hostname\" og\n"
#~ "                            l<>s overv<72>gnings data fra en gkrellmd "
#~ "server.\n"
#~ "   -P, --port server_port   Anvend \"server_port\" for server "
#~ "forbindelsen.\n"
#~ "       --nc                 Ingen konfiguration. Forhindrer "
#~ "konfigurations <20>ndringer.\n"
#~ "   -p, --plugin plugin.so   Til udvikling, l<>ser dit modul under test.\n"
#~ "       --demo               Tving aktivering af mange overv<72>gere s<> "
#~ "temaer kan se alt.\n"
#~ "                            Konfigurations <20>ndringer gemmes ikke.\n"
#~ "   -v, --version            Vis GKrellM version nummer og afslut.\n"
#~ "   -d, --debug-level n      Sl<53> fejlfinding til for udvalgte kode "
#~ "sektioner.\n"
#~ "\n"
#~ "debug-level identikatorer er (bitwise OR for at fejlfinde flere samtidige "
#~ "sektioner):\n"
#~ "     0x10  mail\n"
#~ "     0x20  net\n"
#~ "     0x40  timer knap\n"
#~ "     0x80  sensorer\n"
#~ "\n"

#~ msgid ""
#~ "Windows system dependent code was contributed by:\n"
#~ "Bill Nalen <bill@nalens.com>"
#~ msgstr ""
#~ "Windows system afh<66>ngig kode bidraget af:\n"
#~ "Bill Nalen <bill@nalens.com>"

#~ msgid ""
#~ "GKrellM %d.%d.%d%s\n"
#~ "GNU Krell Monitors\n"
#~ "\n"
#~ "Copyright (c) 1999-2005 by Bill Wilson\n"
#~ "billw@gkrellm.net\n"
#~ "http://gkrellm.net\n"
#~ "\n"
#~ "Released under the GNU General Public License"
#~ msgstr ""
#~ "GKrellM %d.%d.%d%s\n"
#~ "GNU Krell Monitors\n"
#~ "\n"
#~ "Copyright (c) 1999-2005 af Bill Wilson\n"
#~ "billw@gkrellm.net\n"
#~ "http://gkrellm.net\n"
#~ "\n"
#~ "Frigivet under GNU General Public Licens"

#~ msgid "Receive"
#~ msgstr "Modtag"

#~ msgid "Transmit"
#~ msgstr "Send"

#~ msgid "Today"
#~ msgstr "Idag"

#~ msgid "Week"
#~ msgstr "Uge"

#~ msgid "Use above alternate fonts instead of theme specified fonts"
#~ msgstr "Anvend ovenst<73>ende skrifttyper istedet for tema skrifttyper"

#~ msgid "mdir %s total=%d old=%d new=%d\n"
#~ msgstr "mdir %s total=%d gamle=%d nye=%d\n"

#~ msgid "Draw mail: new=%d count=%d "
#~ msgstr "Tegn mail: nye=%d antal=%d "

#~ msgid "string=<%s>\n"
#~ msgstr "streng=<%s>\n"

#~ msgid "mail pipe_command: old command <%s> still running.\n"
#~ msgstr "mail videreled_kommando: gammel kommando <%s> k<>rer stadig.\n"

#~ msgid "mail launching pipe_command <%s>\n"
#~ msgstr "mail starter videreled_kommando <%s>\n"

#~ msgid "Mail user agent is already running.\n"
#~ msgstr "Mail program k<>rer allerede.\n"

#~ msgid "Ay8"
#~ msgstr "Ay8"

#~ msgid "Load fonts as fontsets"
#~ msgstr "Indl<64>s skrifttyper som skrifttype s<>t"

#~ msgid "mail could not run pipe_command <%s>\n"
#~ msgstr "mail kunne ikke k<>re videreled_kommando <%s>\n"

#~ msgid "Show seconds in timer button"
#~ msgstr "Vis sekunder i timer knappen"

#~ msgid "Voice string:"
#~ msgstr "Stemme streng:"

#~ msgid "\t$r    read blocks\n"
#~ msgstr "\t$r    l<>ste blokke\n"