For custom commands in VS2010 Fortran projects the INTDIR variable
is different than in the rest of the solution because Intel
fortran still uses the old VS project files even in VS2010. So,
we replace $(Configuration) directly in the project files. I have also
added a FortranOnly test that tests this feature and is run on any
generator that has Fortran abilities.
8555c2b Look for VCExpress as a possible build tool as well as devenv.
ed0075b Use relative paths for custom command inputs.
38368d5 Revert "With very long file names, VS 2010 was unable to compile files."
8cd66dc Use devenv instead of msbuild for vs2010.
For source files we use full paths. This allows for longer directory
names with VS2010. However, the use of full paths causes the GUI
to not display the custom commands.
In cmMakefile.cxx GetCMakeCFGInitDirectory is replaced with
GetCMakeFilesDirectory for .rule files. In some cases with
external projects, that directory will not exist. With vs10
the .rule files must exist or the rule will run with every build.
This fix creates the path that the .rule file is in. In addition,
it is now a CMake error if the .rule file can not be created.
For VS2010 if a precompiled .obj file was the output of a custom commad,
it was used as part of the build. If it was not, then VS did not
use it as part of the build. This commit updates the test to check
for this issue, and fixes the problem. This fixes bugs #0011891 and
At some point in the past VS 2010 failed some tests with custom commands when
relative paths were not used. It seems that those problems have been fixed.
However, the relative paths apparently are appended to the current working
directoy before vs accesses the file. So, with a long path, relative paths
cause it to create a combined path that is too long.
Thanks to "McBen <viertelvor12@gmx.net>" for the patch.
(Did not preserve original commit author information because
we have a push check for first and last name, and do not
accept authors with only an alias...)
To get rc defines to work in the VS10 IDE requires \" when
constructing PreprocessorDefinitions strings. This is different
than defines for cl.
Also, per-file rc defines were not being generated. Fix that, too.
WriteCLSources should skip source files with "obj" extensions
since WriteObjSources has already written them into the vcxproj
file. Likewise, WriteGroupSources should skip source files with
"obj" extensions to avoid receiving "item ... already exists under
the filter" project-load-time error messages from Visual Studio.
e33cbda VSMidl Test: Use correct include_directories with VS6 (#11461)
262da91 Prohibit space in HOME value for VSMidl test.
13caaa3 VS10: Finish Midl support (#11461)
This commit addresses all of the following:
http://public.kitware.com/Bug/view.php?id=8165http://public.kitware.com/Bug/view.php?id=10687http://public.kitware.com/Bug/view.php?id=11311http://public.kitware.com/Bug/view.php?id=11461
With this commit, the midl support for VS10 is as
complete as midl support ever was for VS9 and earlier.
The VSMidl test should run on all Visual Studio
generator based dashboards.
CMake no longer sends C++ compiler /D flag values
to the midl compiler in Visual Studio generated
projects. I think if we want to add that in the
future, we should add a way to pass midl compiler
specific flags and perhaps an optional way to add
in the C++ definitions, too. For now, not sending
them along gets past the immediate problem wherein
idl files in a CMake VS generated project just didn't
work at all.
The VSMidl test added in this commit was inspired by
the patch attached to 8165.
The test had to be modified such that it will run in
a directory whose name contains no spaces. There is an
existing bug filed against VS10's midl asking Microsoft
to fix that problem. But for now, the test added in this
commit works by copying the source directory to a location
that avoids spaces in the directory names.
Inspired-By: Robert Lenhardt
8c7b19d Only run resource test for MSVC compilers.
753e208 Disable incremental testing for this test, it crashes vs9 linker.
16e7d4b Add flags to resource builds on vs 2010 with a test.
In vs2010 a bad project file could be generated if a .c or .cxx file
was marked with HEADER_FILE_ONLY, if it was in a library that contained
both c and c++ code. This fixes the error in the code, and adds a test
for this case.
The Express Edition does not come with 64-bit tools, but one can install
the "Microsoft Windows SDK v7.1" to get them. Detect this case and
check for the SDK. If found, set PlatformToolset to use the SDK tools.
Otherwise, fail with a concise and informative error.
VS10 uses MSBuild underneath. The <Message></Message> CDATA are just
appended to "echo" and executed as a single command. Encode the message
such that it can be passed to echo. Convert newlines to tabs since they
cannot be printed this way.
In targets with no non-header files the linker language cannot be
determined. Since the target project file cannot be generated at all in
this case, give up as soon as it is detected. Otherwise the generation
code may try to run with uninitialized information.
The original implementation of this generator accidentally used
"$(Configuration)/" for source-specific object file names. Correct it
to use "$(IntDir)/" just like the generators for all previous VS
versions. The target-wide output directory is "$(IntDir)/" already.
VS2010 uses IntDir as the location for writing log files for
what happens during custom build steps. With no IntDir settings,
all ExternalProject usage within the same CMakeLists.txt file
would result in multiple utility targets all trying to use the
same custom build log files.
With parallel builds, they would try to use them simultaneously
and result in file access errors, preventing the builds from
completing successfully.
Now each utility target has its own IntDir setting, and so, its
own custom build rule log files.
When none of the options /Z7, /Zi and /ZI are specified in the cmake
project settings, the project will open in the editor with "Program
Database" as the default debug information format, ending up always
generating PDBs regardless of project configuration.
Modify the output project file so that if the debug information format
is not specified in the cmake project settings it will default to no PDB
generated, just like all the previous other Visual Studio versions.
This problem comes from the fact that Microsoft changed the default
setting of the debug information format to be "Program Database" instead
of "Disabled".
Only generate .filters files if they are different than the last time
they were generated. This should prevent the unnecessary reloads
being triggered with Visual Studio 2010 builds.
The list of libraries to be linked into the current target must be
specified using windows slashes to that UNC paths such as
\\server\share\somelibrary.lib
work correctly. See issue #9917.
The reverted commit attempted to preserve the "../" PREFIX work-around
for avoiding per-config build directories in the VS IDE generators.
However, the original reporter has concluded that a "../" PREFIX no
longer works everywhere in VS 10 project files anyway. Rather than set
OutputPath, this commit restores the $(OutDir)$(TargetName)$(TargetExt)
default.
See issue #9768.
This commit teaches the VS 10 generator to detect the -D_UNICODE option
in preprocessor definitions and set the CharacterSet attribute to the
value 'Unicode'. This was already done for other VS IDE versions.
See issue #9769
The default $(OutDir)$(TargetName)$(TargetExt) for this value works in
most cases because we set the three properties. However, if the target
property PREFIX contains a path component (not documented but happens to
work in other VS generators) we drop it from TargetName and do not put
it in OutDir either. This commit corrects the resulting path by setting
the OutputPath property explicitly with the full path.
See issue #9768.
MS changed the location of the Microsoft.Cpp.$(Platform).user.props
file. This commit teaches the VS 10 generator about the new location.
See issue #9759.
In VS 8 and greater this commit implements
add_dependencies(myexe mylib) # depend without linking
by adding the
LinkLibraryDependencies="false"
option to project files. Previously the above code would cause myexe to
link to mylib in VS 8 and greater. This option prevents dependencies
specified only in the solution from being linked. We already specify
the real link library dependencies in the project files, and any project
depending on this to link would not have worked in Makefile generators.
We were already avoiding this problem in VS 7.1 and below by inserting
intermediate mylib_UTILITY targets. It was more important for those
versions because if a static library depended on another library the
librarian would copy the dependees into the depender! This is no longer
the case with VS 8 and above so we do not need that workaround.
See issue #9732.
David Cole
Bill Hoffman
Steven Velez
Brad King
Robert Goulet
Christoph Watzl