When CMake reports failure to configure a project, especially when the
toolchain does not initialize properly, the true reason may be clear
from reading the CMakeFiles/CMake(Output|Error).log files. Advise users
to look at these files if they exist when configuration fails.
Add RunCMake.Configure test to check that the log files are mentioned
when configuration fails.
Always populate the INTERFACE_LINK_LIBRARIES for interface
entries. Don't populate the old interface properties
matching (IMPORTED_)?LINK_INTERFACE_LIBRARIES(_<CONFIG>)?
if CMP0022 is NEW.
Because the INTERFACE_LINK_LIBRARIES property is now populated by
the target_link_libraries when operating on a static library,
make an equivalent change which populates the property with
the same value when the old link_libraries() command is used. This
silences the policy warning in that case.
This property is generated only for targets which have recorded
policy CMP0022 as NEW, and a compatibility mode is added to
additionally export the old interfaces in that case too.
If the old interfaces are not exported, the generated export files
require CMake 2.8.12. Because the unit tests use a version which
is not yet called 2.8.12, temporarily require a lower version.
This property replaces the properties which
match (IMPORTED_)?LINK_INTERFACE_LIBRARIES(_<CONFIG>)?, and is enabled
for IMPORTED targets, and for non-IMPORTED targets only with a policy.
For static libraries, the INTERFACE_LINK_LIBRARIES property is
also used as the source of transitive usage requirements content.
Static libraries still require users to link to all entries in
their LINK_LIBRARIES, but usage requirements such as INCLUDE_DIRECTORIES
COMPILE_DEFINITIONS and COMPILE_OPTIONS can be restricted to only
certain interface libraries.
Because the INTERFACE_LINK_LIBRARIES property is populated unconditionally,
we need to compare the evaluated result of it with the link implementation
to determine whether to issue the policy warning for static libraries. For
shared libraries, the policy warning is issued if the contents of
the INTERFACE_LINK_LIBRARIES property differs from the contents of the
relevant config-specific old LINK_INTERFACE_LIBRARIES property.
Copy cmGlobalVisualStudio11Generator to cmGlobalVisualStudio12Generator
and update version numbers accordingly. Add the VS12 enumeration value.
Add module CMakeVS12FindMake to find MSBuild. Look for MSBuild in its
now-dedicated Windows Registry entry. Teach the platform module
Windows-MSVC to set MSVC12 and document the variable. Teach module
InstallRequiredSystemLibraries to look for the VS 12 runtime libraries.
Teach tests CheckCompilerRelatedVariables, Preprocess, VSExternalInclude,
and RunCMake.GeneratorToolset to treat VS 12 as they do VS 10 and 11.
Inspired-by: Minmin Gong <minmin.gong@gmail.com>
Extend the signature
try_compile(RESULT_VAR <bindir> <srcfile> ...)
to allow multiple sources as
try_compile(RESULT_VAR <bindir> SOURCES <srcfile>... ...)
Process the sources to generate a CMakeLists.txt that enables all needed
languages.
Teach the TryCompile test to try cases with two sources of the same
language and of mixed languages. Teach RunCMake.try_compile to cover
error cases for the signature.
Use makefile->IssueMessage() to print the unprocessed watch message in a
format consistent with other CMake messages and with a more complete
call stack for the access.
When a watch does not specify a command to call then variable_watch
prints out a message to stderr. Remove code after that which collects
all variable values to construct a message that is never printed.
Otherwise such code causes a READ_ACCESS watch to trigger on all
variables in the currents scope.
Reported-by: Yichao Yu <yyc1992@gmail.com>
This is initialized by CMAKE_<LANG>_VISIBILITY_PRESET. The target
property is used as the operand to the -fvisibility= compile option
with GNU compilers and clang.
Process all arguments in a single loop using a simple state machine.
While at it, fix some error message typos. Also allow LINK_LIBRARIES
with no actual libraries to disable use of the -DLINK_LIBRARIES=...
from the CMAKE_FLAGS. This was already possible in the old logic if
LINK_LIBRARIES was immediately followed by another keyword argument
instead of the end of the argument list, so allow it in general.
Update the RunCMake.try_compile test cases accordingly.
7378792 if: Add test for IS_DIRECTORY
4ab10e0 Merge branch 'master' into fix-FileIsDirectory-SEGV
045d6ae KWSys: Fix SystemTools::FileIsDirectory with long paths (#14176)
Add a RunCMake.if test to cover if() command behavior. Start with a
test for IS_DIRECTORY cases with an existing directory and a long path,
both with a trailing slash.
The ExternalData_LINK_CONTENT option tells ExternalData to convert real
data files it finds into content links and to "stage" the original
content in a ".ExternalData_<algo>_<hash>" file. However, after a data
object has been staged it is possible that a user-provided pattern in
the "REGEX:" option will later match the staged object file. We must
not process staged object files even when a user pattern matches them.
Fix the implementation to not match a staged object file as a normal
data file for conversion. Extend the RunCMake.ExternalData test to
cover this case.
The idea is to write to a temp file which contains generator
expressions, and at generate time, evaluate the generator expressions,
and write the result to a file.
Because executables on Windows are limited in the length of command line
it is possible to use, it is common to write command line arguments to a
file instead and specify the file as a source of arguments.
This new FILE(GENERATE) subcommand allows the use of generator
expressions to create such files so that they can be used with
add_custom_command for example.
Commit b8259c3d (Centralize maintenance of usage requirement include
directories, 2013-04-29) changed the handling of the property.
Previously setting the property directly instead of via
target_link_libraries would not result in transitive include
directory handling.
When called with a non-existent LHS target name the user may be trying
to add file-level dependencies. Clarify the error message to explain
the difference between target-level and file-level dependencies. Point
the reader at the commands and options needed for the latter.
The commit to add the INTERFACE_QT_MAJOR_VERSION in qtbase.git
is 14054d45 (Set the INTERFACE_QT_MAJOR_VERSION to 5., 2013-03-16)
which will be part of Qt 5.1.0.
If there is a Qt 5.0.3 release, there is no guarantee it will
contain that commit. Make sure such a Qt version does not fail
with this test if not.
We can do this check only if the TargetName is non-empty, which means
that we're evaluating INTERFACE_INCLUDE_DIRECTORIES from a linked
dependency which was set using target_link_libraries.
It is possible to have relative paths in INCLUDE_DIRECTORIES already
in CMake 2.8.10.2, so that part will require a policy to fix.
It is considered an error if the INTERFACE_INCLUDE_DIRECTORIES contains
a directory which does not exist, which indicates a programmer error
by the upstream, or a packaging error.
One of the RunCMake.CompatibleInterface tests also needs to be updated
due to this change. Non-existant includes were used in the test, but
are not needed.
Check that source and binary directories are not part of the
INTERFACE_INCLUDE_DIRECTORIES for installed IMPORTED targets.
This is limited to directories which do not contain generator
expressions to evaluate. Such paths can only be checked at time
of use of the imported target, which will be done in a follow up
patch.
d90f49b CTest: Fail early without PROJECT_BINARY_DIR (#14005)
2e1c2bd build_command: Fail early without CMAKE_MAKE_PROGRAM (#14005)
4e5cb37 Refactor RunCMake.build_command test to allow more cases
Do not use PROJECT_BINARY_DIR before it is defined. If it is not
defined when needed, fail with an error message suggesting that the
project() command be invoked first.
If CMAKE_MAKE_PROGRAM is not set fail with an error message instead of
crashing. Suggest calling project() or enable_language() first to
ensure that CMAKE_MAKE_PROGRAM is set.
Move the ErrorsOFF/ON common logic from CMakeLists.txt into an
ErrorsCommon file to allow other test cases to be added that do not use
the Errors test logic.
The CMake language implicitly flattens lists so a ";" in a list element
must be escaped with a backslash. List expansion removes backslashes
escaping semicolons to leave raw semicolons in the values. Teach
ExternalData_Add_Test and ExternalData_Expand_Arguments to re-escape
semicolons found in list elements so the resulting argument lists work
as if constructed directly by the set() command.
For example:
ExternalData_Add_Test(Data NAME test1 COMMAND ... "a\\;b")
ExternalData_Expand_Arguments(Data args2 "c\\;d")
add_test(NAME test2 COMMAND ... ${args2})
should be equivalent to
set(args1 "a\\;b")
add_test(NAME test1 COMMAND ... ${args1})
set(args2 "c\\;d")
add_test(NAME test2 COMMAND ... ${args2})
which is equivalent to
add_test(NAME test1 COMMAND ... "a;b")
add_test(NAME test2 COMMAND ... "c;d")
Note that it is not possible to make ExternalData_Add_Test act exactly
like add_test when quoted arguments contain semicolons because the CMake
language flattens lists when constructing function ARGN values. This
re-escape approach at least allows test arguments to have semicolons.
While at it, teach ExternalData APIs to not transform "DATA{...;...}"
arguments because the contained semicolons are non-sensical.
Suggested-by: Jean-Christophe Fillion-Robin <jchris.fillionr@kitware.com>
Move the Tests/FPHSA_InvalidFOUND_VAR test case over to a new
RunCMake.FPHSA test with a BadFoundVar case. The RunCMake tests are
built to cover failure cases easily and robustly.
e83e6a1 Test Unix Makefiles generator support for changing compilers
c307e1c Tests/RunCMake: Allow tests to control build tree behavior
2963c98 Merge branch 'empty-compiler-crash' into compiler-change-cleanup
1df09e5 Delete entire CMakeFiles directory when deleting CMakeCache.txt (#13756)
Add RunCMake.CompilerChange test to cover use of -DCMAKE_C_COMPILER=cc
to change the compiler of an existing build tree. Also test for proper
failure with -DCMAKE_C_COMPILER="" and no CC in the environment.
This is a partial revert of commit 77cecb77 (Add includes and compile
definitions with target_link_libraries., 2012-11-05).
As the interface includes and defines are now determined by the link
closure, there is no need to populate the corresponding properties
explicitly.
ba48e63 Generate config-specific interface link libraries propeties.
deb51a7 Remove unused forward declarations.
9712362 Don't allow utility or global targets in the LINKED expression.
faa927e Make sure INTERFACE properties work with OBJECT libraries.
510fdcb Whitelist target types in target_{include_directories,compile_definitions}
4de7178 Ensure that the build interface includes have been added.
df74bc3 Only append build interface include dirs to particular targets.
d4e5c67 Don't keep track of content determined by target property values.
1fb545a Move a special case for PIC from the genex to the cmTarget code.
57175d5 Only use early evaluation termination for transitive properties.
4cf161a Fix determination of evaluating link libraries.
3a298c0 Fix generation of COMPILE_DEFINITIONS in DependInfo.cmake.
655e98b Ensure type specific compatible interface properties do not intersect.
46e2896 The COMPATIBLE_INTERFACE does not affect the target it is set on.
5f926a5 Test printing origin of include dirs from tll().
7c0ec75 De-duplicate validation of genex target names.
...
Implement generator toolset selection (cmake -T) for VS >= 10 by setting
the PlatformToolset. Extend the RunCMake.GeneratorToolset test case to
verify CMAKE_GENERATOR_TOOLSET when the generator supports -T.
Since commit 485a940e (VS: Simplify MSVC version reporting, 2012-08-23)
all MSVC version information is detected during the compiler id step
from the actual compiler invoked by generated build systems rather than
hard-coded in VS generators. Therefore we can set the PlatformToolset
in VS >= 10 project files and support toolsets from other VS versions.
Reject the option by default. It will be implemented on a per-generator
basis. Pass the setting into try_compile project generation. Add cache
entry CMAKE_GENERATOR_TOOLSET and associated variable documentation to
hold the value persistently.
Add a RunCMake.GeneratorToolset test to cover basic "-T" option cases.
Verify that CMAKE_GENERATOR_TOOLSET is empty without -T, that -T is
rejected when the generator doesn't support it, and that two -T options
are always rejected.
e48d842 Cache context-independent includes on evaluation.
089fe1c Optimize genex evaluation for includes and defines.
179f495 find_package: Reword <package>_NO_INTERFACES documentation
e7b579b Test workaround of bad interface include directories from depends.
77cecb7 Add includes and compile definitions with target_link_libraries.
0b92602 Add the $<LINKED:...> generator expression.
0fa7f69 Add API to check if we're reading a includes or defines property.
2c3654c Add a way to exclude INTERFACE properties from exported targets.
d4297d5 Export targets to a targets file, not a Config file.
df4d2b2 Make it an error for INSTALL_PREFIX to be evaluated.
7ceeba9 Advance more when preprocessing exported strings.
30268b4 Handle reading empty properties defined by the link interface.
5484c60 Merge branch 'vs6-rule-files' into add-ExternalData-module
1fd8d01 ExternalData: Attach download rules to content links in IDEs
a6d3ffc Fix Module.ExternalData test on VS 6
aed590a Fix Module.ExternalData test on Cygwin
06e8ded Merge branch 'fix-atomic-rename-on-Windows' into add-ExternalData-module
e2e0d2e ExternalData: Collapse ../ components in DATA{} paths
ee2abfd ExternalData: Add support for SHA 1 and 2 hash algorithms
aa8b228 ExternalData: Generalize hash algo/ext handling
9e518a8 ExternalData: Allow DATA{} syntax to reference directories
175ed02 ExternalData: Allow ()-groups in series match regex
4befecc ExternalData: Add tests covering interfaces and errors
bcd2580 ExternalData: Improve series matching using an explicit syntax
c0cebcb ExternalData: Remove unused private interface
5275993 ExternalData: Cleanup stray TODO and typo in comments
7bb8344 ExternalData: Do not match directory names when resolving DATA{}
00d801f ExternalData: Remove compatibility with CMake < 2.8.5
...
This is both a short form of using a TARGET_DEFINED expression
together with a TARGET_PROPERTY definition, and a way to strip
non-target content from interface properties when exporting.
Use a trailing slash to reference a directory. Require that a list
of associated files be specified to select from within the directory.
One may simply use DATA{Dir/,REGEX:.*} to reference all files but
get a directory passed on the command line.
Add a Module.ExternalData test to verify data retrieval and test
argument DATA{} references.
Add a RunCMake.ExternalData test to verify error handling and automatic
transformation of a raw data to a content link and staged object.
6063fef Output include directories as LOG messages, not warnings.
aa66748 Specify the target whose includes are being listed.
d70204a Only output includes once after the start of 'generate-time' when debugging.
0d46e9a Store includes from the same include_directories call together.
Otherwise, we get a separate IncludeDirectoriesEntry for each include,
and that causes unnecessary and confusing splitting in the output when
debugging the INCLUDE_DIRECTORIES property.
This new expression allows checking how a policy was set when a target
was created. That information is only recorded for a subset of policies,
so a whitelist is used.
This allows a dependee to inform a target that it should have its
POSITION_INDEPENDENT_CODE property set to ON, or OFF. The value of
the POSITION_INDEPENDENT_CODE property, if set, must be consistent
with any INTERFACE_POSITION_INDEPENDENT_CODE properties on dependees.
Add a test covering the consistency checks on platforms where they run.
Historically CMake has always expanded ${} variable references in the
values given to include_directories(), link_directories(), and
link_libraries(). This has been unnecessary since general ${}
evaluation syntax was added to the language a LONG time ago, but has
remained for compatibility with VERY early CMake versions.
For a long time the re-expansion was a lightweight operation because it
was only processed once at the directory level and the fast-path of
cmMakefile::ExpandVariablesInString was usually taken because values did
not have any '$' in them. Then commit d899eb71 (Call
ExpandVariablesInString for each target's INCLUDE_DIRECTORIES,
2012-02-22) made the operation a bit heavier because the expansion is
now needed on a per-target basis. In the future we will support
generator expressions in INCLUDE_DIRECTORIES with $<> syntax, so the
fast-path in cmMakefile::ExpandVariablesInString will no longer be taken
and re-expansion will be very expensive.
Add policy CMP0019 to skip the re-expansion altogether in NEW behavior.
In OLD behavior perform the expansion but improve the fast-path
heuristic to match ${} but not $<>. If the policy is not set then warn
if expansion actually does anything. We expect this to be encountered
very rarely in practice.
This command works only when building projects using the same
architecture as the running CMake binary. Since it was introduced
CMake has learned macro() and function() to add commands, and the
execute_process() command to launch advanced external computations.
Add a RunCMake.load_command test to verify the warning appears.
It should be possible for example to do this:
"$<AND:${FOO},$<BOOL:${TGT}>,$<BOOL:$<TARGET_PROPERTY:${TGT},PROP>"
such that it works simliarly to the C code:
if (foo && tgt && tgt->prop())
{
}
The example of generator expression code is a little bit contrived as
it could be written other ways with the same functionality. Nevertheless,
as these cases already work and are intentional, test for them.
This fixes a regression introduced in commit 290e92ad (Move
GetIncludeDirectories to cmGeneratorTarget, 2012-09-16) which loops over
cmGeneratorTargets before they get created, so the container is empty.
Otherwise the comma is treated as plain text by ParseContent.
$<STREQUAL:,> should be valid and true.
$<STREQUAL:,something> should be valid and false.
$<STREQUAL:,,> should be non-valid as it is 3 parameters.
$<STREQUAL:something,,> should be non-valid as it is 3 parameters.
Additionally, this allows reporting the correct error for other
expressions. For example $<TARGET_PROPERTY:,> should be invalid
because it has an empty target and empty property. It shouldn't
attempt to read the property ',' on the 'implicit this' target.
The expressions may be parsed and then cached and evaluated multiple
times. They are evaluated lazily so that literals such as ',' can be
treated as universal parameter separators, and can be processed from
results without appearing literally, and without interfering with the
parsing/evaluation of the entire expression.
This expression evaluates to '1' or '0' to indicate whether the build
configuration for which the expression is evaluated matches tha named
configuration. In combination with the "$<0:...>" and "$<1:...>"
expressions this allows per-configuration content to be generated.
Add generator expressions that combine and use boolean test results:
$<0:...> = empty string (ignores "...")
$<1:...> = content of "..."
$<AND:?[,?]...> = '1' if all '?' are '1', else '0'
$<OR:?[,?]...> = '0' if all '?' are '0', else '1'
$<NOT:?> = '0' if '?' is '1', else '1'
These will be useful to evaluate (future) boolean query expressions and
condition content on the results. Include tests and documentation.
Ancient versions of CMake required else(), endif(), and similar block
termination commands to have arguments matching the command starting the
block. This is no longer the preferred style.
Run the following shell code:
for c in else endif endforeach endfunction endmacro endwhile; do
echo 's/\b'"$c"'\(\s*\)(.\+)/'"$c"'\1()/'
done >convert.sed &&
git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' |
egrep -z -v '^(Utilities/cm|Source/kwsys/)' |
egrep -z -v 'Tests/CMakeTests/While-Endwhile-' |
xargs -0 sed -i -f convert.sed &&
rm convert.sed
Previously CMake silently accepted the empty string and added a bogus
dependency on the current directory. Instead warn about the empty file
name and ignore it. We cannot make this an error because there may be
existing projects that accidentally depend on the old behavior.
Add a RunCMake.include test to cover this case.
Since commit e1409ac5 (Support building shared libraries or modules
without soname, 2012-04-22) CMake crashes on the code
add_library(foo SHARED foo.nolang)
because the logic to lookup the language's soname flag was moved from
cmTarget::GetLibraryNames to cmMakefile::GetSONameFlag without its check
for a NULL language. Restore the check for NULL.
Add RunCMake.Languages test to cover language error cases like this one.
Add "RunCMake.include_external_msproject" test to use the TYPE, GUID, and
PLATFORM options to include_external_msproject. Since projects with
custom types and platforms cannot be loaded without special VS plugins
validate the results by directly parsing the generated solution (.sln).
Co-Author: Leonid Yurchenko <nocturne@qarea.com>
Look for a <SubTest>-check.cmake script and load it to check side
effects of the sub test. Provide it with the test source and build tree
paths in variables. Check for a failure message in a result variable.
Since commit ed1ea24c (Fix INSERT to allow inserting to empty list,
2006-05-15) the list command allows insertion into an empty list at
index 0. Fix rejection of insertion at non-zero (negative) indices to
present an error message instead of crashing.
While at it, fix the error message of the GET and REMOVE_AT operations
when the list is empty to not present a bogus allowed range.
Add a "RunCMake.list" test to cover failure cases on empty lists.
Teach the RunCMake.ObjectLibrary test to verify that languages used in
an OBJECT library are propagated to targets that use it so that the
languages can be included in link analysis.
Add "RunCMake.ObjectLibrary" test to verify that unsupported use cases
are rejected with errors:
* An OBJECT library may not reference another object library
* An OBJECT library may not be referenced in target_link_libraries
* An OBJECT library may not contain non-compiling sources
* An OBJECT library may not have pre/post build/link commands
* An OBJECT library may not be installed, exported, or imported
Also verify that invalid $<TARGET_OBJECTS:...> expressions are
diagnosed.
The CMakeCommands.build_command test performs output/error checking
so move it over to RunCMake to re-use the generalized infrastrucure.
This is the only test left using Tests/CMakeCommands/CMakeLists.txt
so remove it.
The CMakeOnly directory added by commit 9a20abf0 (Add infrastructure for
CMake-only tests, 2012-01-11) was sufficient only for tests that always
run CMake to successfully configure a project. Later commit eeaaffcb
(find_package: Test error and warning messages in failure cases,
2012-02-28) added a sample test that covers failure cases.
Generalize the above to create new "RunCMake" test infrastructure that
can run CMake multiple times for a single project with different
variations and check for expected result/stdout/stderr. Allow for both
successful and failing CMake project configuration cases. This will be
useful to test error messages and failure behavior.
Brad King
Stephen Kelly
Andreas Mohr
Petr Kmoch
Kitware Robot
David Cole
Alex Neundorf