If the expression $<TARGET_PROPERTY:prop> appears in the content
of a target property, the target that prop is read from is
the 'head target' of the expression. In contexts such as evaluating
the content of a target property during generation, such
as INCLUDE_DIRECTORIES, the 'head target' is the one on which the
initial request was made.
If evaluating a generator expression which is not a target property
content, the target must be explicitly specified. Such contexts
include add_custom_command and file(GENERATE). The content might
then look like
$<TARGET_PROPERTY:tgt,prop>
However, as there is no HeadTarget set, any generator expressions
evaluated as part of reading prop from tgt which do not specify
the tgt directly report an error.
Modify the logic of the TARGET_PROPERTY generator expression so
that in such contexts, the 'head target' is set to the appropriate
target which was first encountered.
It is common to specify a CMAKE_TOOLCHAIN_FILE and get a warning
for using it despite it not being used.
The WarnUnusedCliUnused test relies on the warning being emitted
each time cmake is run on an existing build. That behavior is changed
by this patch to warn only on the first invokation of CMake, and not
on subsequent invokations (because the variable is in the cache with
the same value). For that test, a clean target is added which clears
the cache and cause the warning to be emitted each time.
As the Ninja generator does not support the feature needed to test
this, it is not tested with that generator.
This command is similar to add_definitions, in that it affects
the compile options of all targets which follow it. The implementation
is similar to the implementation of the include_directories command,
in that it is based on populating a COMPILE_OPTIONS directory property
and using that to initialize the same property on targets.
Unlike the include_directories command however, the add_compile_options
command does not affect previously defined targets. That is, in
the following code, foo will not be compiled with -Wall, but bar
will be:
add_library(foo ...)
add_compile_options(-Wall)
add_library(bar ...)
Use makefile->IssueMessage() to print the unprocessed watch message in a
format consistent with other CMake messages and with a more complete
call stack for the access.
When a watch does not specify a command to call then variable_watch
prints out a message to stderr. Remove code after that which collects
all variable values to construct a message that is never printed.
Otherwise such code causes a READ_ACCESS watch to trigger on all
variables in the currents scope.
Reported-by: Yichao Yu <yyc1992@gmail.com>
Checkout [1] as an example of the test failures. In that particular cases, the
failures is caused by the plus sign in the path being pass unescaped
(buildd-cmake_2.8.9-1~bpo60+1-armel-3Lvkef) to the regexp.
In addition to failures in the log, the following new tests also fail in 2.8.11:
243 - CTestTestMemcheckUnknown (Failed)
244 - CTestTestMemcheckUnknownQuoted (Failed)
248 - CTestTestMemcheckDummyValgrindFailPre (Failed)
249 - CTestTestMemcheckDummyValgrindFailPost (Failed)
250 - CTestTestMemcheckDummyPurify (Failed)
251 - CTestTestMemcheckDummyBC (Failed)
253 - CMake.List (Failed)
[1] https://buildd.debian.org/status/fetch.php?pkg=cmake&arch=armel&ver=2.8.9-1~bpo60%2B1&stamp=1369243896
dc1d025 OS X: Add test for rpaths on Mac.
8576b3f OS X: Add support for @rpath in export files.
00d71bd Xcode: Add rpath support in Xcode generator.
94e7fef OS X: Add RPATH support for Mac.
This fixes bug #13797.
The kinds of changes applied in 373faae5 for frameworks are now
applied to CFBundle. The prefix and suffix for CFBundles are
now handled in cmTarget::GetFullNameInternal.
That will allow things like this:
find_package(Qt4)
qt4_generate_moc(myfile.h moc_myfile.cpp TARGET foo) # Note, foo target doesn't
# exist until below.
add_library(foo ...)
The qt4_generate_moc call would use the INCLUDE_DIRECTORIES from
the foo target using generator expressions. Currently it reads
the INCLUDE_DIRECTORIES directory property, meaning that include_directories()
is required.
Support for the TARGET is also added to qt4_wrap_cpp, but not qt4_automoc,
as that is deprecated in favor of the AUTOMOC target property.
The moc tool reports failure if the Q_INTERFACES macro is used with
an argument which has not appeared with Q_DECLARE_INTERFACE, so that is
the basis of the unit test.
The command line arguments are now always written to a file, which is
passed to moc as the @atfile. This was already the case on Windows, but
now it is used everywhere. The reason for that is that it is not currently
possible to expand the list of includes from a target directly in
a add_custom_command invokation (though that may become possible in the
future). There is not a big disadvantage to using the file anyway on
unix, so having one code path instead of two is also a motivation.
This corresponds to the g++ and clang++
option -fvisibility-inlines-hidden on linux. On Windows with MinGW,
this corresponds to -fno-keep-inline-dllexport. That option is
not supported by clang currently.
This is initialized by CMAKE_<LANG>_VISIBILITY_PRESET. The target
property is used as the operand to the -fvisibility= compile option
with GNU compilers and clang.
Process all arguments in a single loop using a simple state machine.
While at it, fix some error message typos. Also allow LINK_LIBRARIES
with no actual libraries to disable use of the -DLINK_LIBRARIES=...
from the CMAKE_FLAGS. This was already possible in the old logic if
LINK_LIBRARIES was immediately followed by another keyword argument
instead of the end of the argument list, so allow it in general.
Update the RunCMake.try_compile test cases accordingly.
7378792 if: Add test for IS_DIRECTORY
4ab10e0 Merge branch 'master' into fix-FileIsDirectory-SEGV
045d6ae KWSys: Fix SystemTools::FileIsDirectory with long paths (#14176)
Add a RunCMake.if test to cover if() command behavior. Start with a
test for IS_DIRECTORY cases with an existing directory and a long path,
both with a trailing slash.
In Qt 5.1, Qt5::Core has a INTERFACE_QT_MAJOR_VERSION property
of '5', and since CMake 2.8.11, Qt4::QtCore has an
INTERFACE_QT_MAJOR_VERSION of '4'. This was introduced in
commit 4aa10cd6 (FindQt4: Set the INTERFACE_QT_MAJOR_VERSION for
Qt4::QtCore, 2013-03-16), to produce an error if Qt 4 and Qt 5
are erroneously used by the same target. This can also be used
however to determine the Qt major version, and therefore the
particular moc executable to use during automoc steps. This means
that targets in a single buildsystem can use a selection of Qt 4
and Qt 5, and still take advantage of the CMAKE_AUTOMOC feature
without conflicting.
The ExternalData_LINK_CONTENT option tells ExternalData to convert real
data files it finds into content links and to "stage" the original
content in a ".ExternalData_<algo>_<hash>" file. However, after a data
object has been staged it is possible that a user-provided pattern in
the "REGEX:" option will later match the staged object file. We must
not process staged object files even when a user pattern matches them.
Fix the implementation to not match a staged object file as a normal
data file for conversion. Extend the RunCMake.ExternalData test to
cover this case.
The VS 6 IDE does not like spaces in definition values so CMake drops
them and warns. The Tests/CompileDefinitions test C code that looks for
the dropped definitions already knows to skip them, but CMake still
warns. Silence the warnings by avoiding such values in the first place
on VS 6.
The variables in this module are used to configure a header file
with defines whose name depends on the name of the target.
As valid names of targets may be invalid for use as defines, convert
the names of the defines used to C identifiers first. This is already
done in C++ code for the DEFINE_SYMBOL property.
This is not as simple as ensuring that the BASE_NAME is a C identifier,
because most of the define names are configurable, and because use of
a BASE_NAME which is not a C identifier, such as 4square can become a
C identifier by specifying a prefix in the generate_export_header
macro.
They can't be used when evaluating link libraries, but they can be
used for include directories and compile definitions. Later they can
be used for compile options.
The idea is to write to a temp file which contains generator
expressions, and at generate time, evaluate the generator expressions,
and write the result to a file.
Because executables on Windows are limited in the length of command line
it is possible to use, it is common to write command line arguments to a
file instead and specify the file as a source of arguments.
This new FILE(GENERATE) subcommand allows the use of generator
expressions to create such files so that they can be used with
add_custom_command for example.
Make handling of directory separators consistent between
non-bundle and bundle code.
Remove xcode specific flag from cmTarget when getting install_name.
Add (more) consistent convenience functions in cmTarget to get
directories inside of bundles and frameworks to add files to.
This refactor also fixes bug #12263 where frameworks
had the wrong install name when SKIP_BUILD_RPATH.
Also make install_name for frameworks consistent between Makefile
and Xcode generator.
The parent commit added a empty_entry_test shared library to the
IncludeDirectories test. Some toolchains fail to create a shared
library with no user-defined symbols, so provide a dummy symbol.
a7ba452 Add the JOIN generator expression.
96ec314 Make it possible for any genex to have arbitrary content at the end.
bd638ee Rename the method determining if a genex accepts arbitrary content.
dc742fe Extract the ProcessArbitraryContent method.
Both <string> and <cmSystemTools.h> include <stdio.h> one or the other way. It
looks like the CMake header adds a define that will cause another part of the
system header to be used, resulting in conflicting definitions.
6489015 Remove an endif() followed by an if() for the same condition.
e7813b1 Add a test for Qt5Automoc
27fb96b Make the QtAutomoc test compile with either Qt 4 or Qt 5
This allows for example, the buildsystem to use names like 'boost_any'
instead of the overly generic 'any', and still be able to generate
IMPORTED targets called 'boost::any'.
Teach CMakeParseImplicitLinkInfo to convert the CMAKE_LINKER file name
to a regular expression that matches only the original name. Escape
special characters like '+' so they are not treated as regex syntax.
Extend the ImplicitLinkInfoTest to test handling of a CMAKE_LINKER value
with many special characters.
10bc50e Tests: ignore Guard Malloc messages in MemChecker tests
159c3e9 Tests: add a test with custom options passed to valgrind
61ddb93 CTest: fix comment documenting cmBoundsCheckerParser class
cbdfcb0 Tests: add test for non-existent Valgrind suppression file
3b5b758 CTest: drop suppression for gcc 2.9.6 errors from default Valgrind flags
7752253 Tests: verify that memory checker output files are always present
abf1df4 Tests: remove code duplication in CTestTestMemCheck tests
f499422 CTest: remove unreachable code and CTestTestMemcheckUnknown test
dde6306 CTest: use an output file for Valgrind (#14110)
bcc0f3f Tests: create output files for all memory checkers
ac9a5f4 ctest_build: Pass projectDir to GenerateBuildCommand
a6c0299 CTest: Simplify ctest_* command source/build dir lookup
1ca9318 VS: Add test for building MSBuild project in subdir
3cd4000 VS: Use .sln parser to build targets in subdirs with msbuild (#13623)
df035e4 VS: Create parser for Visual Studio .sln files
de8be9e Add projectDir parameter to GenerateBuildCommand
This generator expression joins a list with a separator. The separator
may contain arbitrary content, such as commas, which is ordinarily a
delimiter in the generator expression syntax.
Add support to maintain designer functionality for Visual Studio C++
Windows Forms projects. Also add a test project showing how to use
the CMakeLists.txt file and, when successfully configured, will allow
use of the designer for the included form.
All supported memory checkers now write their output to a file. Use a dummy
checker that ignores the given filename and ensure that the missing file is
reported as error.
The code for the tests is basically the same for all those subtests, so have
one template and configure that for as many tests as possible to make it
easier maintainable.
The memory checker command can't be quoted at this point, because previously it
has been tested that the given file exists, which will fail if the name is
quoted. The CTestTestMemcheckUnknown test aimed to test this case, has always
failed to do so and serves no useful purpose therefore.
The dummy memory tester implementation now understands the command line
switches for all memory checkers to redirect the output to a file. This avoids
triggering the error cases for BoundsChecker and Purify because the output file
does not exist.
Commit b8259c3d (Centralize maintenance of usage requirement include
directories, 2013-04-29) changed the handling of the property.
Previously setting the property directly instead of via
target_link_libraries would not result in transitive include
directory handling.
This allows the ctest_build command's TARGET option to name a target
in a subdirectory and still build properly with msbuild.
Add test case covering use of ctest_build() with such a TARGET.
Add test covering cmGlobalGenerator::GenerateBuildCommand for VS
solutions with MSBuild and building a target defined in a subdirectory
and not part of ALL.
Create class cmVisualStudioSlnParser as a generic parser for Visual
Studio .sln files. Implement minimum functionality but keep class
extensible. Add tests for the class.
Use the suggestion from http://support.microsoft.com/kb/2262855 to escape
semicolons in preprocessor definitions for VS >= 10. Update the
COMPILE_DEFINITIONS documentation disclaimer list of known limitations
accordingly. Update our "Preprocess" test to cover the case.
Suggested-by: Jean-Christophe Fillion-Robin <jchris.fillionr@kitware.com>
The MS tools create two types of PDB files as explained here:
http://msdn.microsoft.com/en-us/library/yd4f8bd1%28v=vs.71%29.aspxhttp://msdn.microsoft.com/en-us/library/yd4f8bd1%28v=vs.80%29.aspxhttp://msdn.microsoft.com/en-us/library/yd4f8bd1%28v=vs.90%29.aspxhttp://msdn.microsoft.com/en-us/library/yd4f8bd1%28v=vs.100%29.aspx
One is created by the compiler (/Fd) and the other by the linker (/pdb).
The two options should not specify the same file. Split them up.
In the VS IDE generators, simply drop ProgramDataBaseFileName to
take the VS default "/Fd$(IntDir)vc$(PlatformToolsetVersion).pdb".
In the Makefile generators, set "/Fd" on the compile line to be
the directory containing object files (with a trailing slash the
compiler will add the "vc$(PlatformToolsetVersion).pdb" filename
automatically). Drop the /Fd option from the exe link command
line and add "/pdb" instead (already done for dll linking).
Update these rules for both MSVC and Intel tools.
Drop support for PDB_OUTPUT_DIRECTORY and PDB_NAME in STATIC
libraries because the generated .pdb files are only from /Fd
and not real linker-generated .pdb files. Update documentation to
clarify that the PDB_* properties are only for linker .pdb files.
This regresses the PDBDirectoryAndName test for STATIC libraries.
Since it is not clear at this time what should be done for STATIC
library .pdb files, comment out the relevant portion of the test
and leave a TODO comment.
When called with a non-existent LHS target name the user may be trying
to add file-level dependencies. Clarify the error message to explain
the difference between target-level and file-level dependencies. Point
the reader at the commands and options needed for the latter.
The commit to add the INTERFACE_QT_MAJOR_VERSION in qtbase.git
is 14054d45 (Set the INTERFACE_QT_MAJOR_VERSION to 5., 2013-03-16)
which will be part of Qt 5.1.0.
If there is a Qt 5.0.3 release, there is no guarantee it will
contain that commit. Make sure such a Qt version does not fail
with this test if not.
We can do this check only if the TargetName is non-empty, which means
that we're evaluating INTERFACE_INCLUDE_DIRECTORIES from a linked
dependency which was set using target_link_libraries.
It is possible to have relative paths in INCLUDE_DIRECTORIES already
in CMake 2.8.10.2, so that part will require a policy to fix.
It is considered an error if the INTERFACE_INCLUDE_DIRECTORIES contains
a directory which does not exist, which indicates a programmer error
by the upstream, or a packaging error.
One of the RunCMake.CompatibleInterface tests also needs to be updated
due to this change. Non-existant includes were used in the test, but
are not needed.
Check that source and binary directories are not part of the
INTERFACE_INCLUDE_DIRECTORIES for installed IMPORTED targets.
This is limited to directories which do not contain generator
expressions to evaluate. Such paths can only be checked at time
of use of the imported target, which will be done in a follow up
patch.
In particular, this checks that CTest's use of select() has a sufficient
file descriptor set size limit (FD_SETSIZE) to handle many child
processes at the same time. Running 20 tests requires more than 64
descriptors, the Cygwin default that we override.
Rename the variable added by commit 9ce1b9ef (Add
CMAKE_BUILD_INTERFACE_INCLUDES build-variable, 2012-11-25) to
CMAKE_INCLUDE_CURRENT_DIR_IN_INTERFACE to be more consistent with the
existing CMAKE_INCLUDE_CURRENT_DIR variable.
Suggested-by: Alex Neundorf <neundorf@kde.org>
We can't find both preprocessing expressions at once, because then
the BUILD_INTERFACE will always be favored if both are present, even
if INSTALL_INTERFACE appears first.
This was affecting the behavior of install(EXPORT) because the
INTERFACE_INCLUDE_DIRECTORIES contained entries like
/foo/include;$<INSTALL_INTERFACE:/bar/include>
As the INSTALL_INTERFACE always evaluates to '0', it always needs
to be preprocessed properly.
Since commit e03f83f3 (ProcessorCount test: fix path to cmsysTestsCxx
executable, 2013-01-24) the directory references a target that is not
built when BUILD_TESTING is OFF. It makes no sense to add tests without
BUILD_TESTING anyway.
While at it, use add_subdirectory instead of subdirs to add CMakeTests.
d90f49b CTest: Fail early without PROJECT_BINARY_DIR (#14005)
2e1c2bd build_command: Fail early without CMAKE_MAKE_PROGRAM (#14005)
4e5cb37 Refactor RunCMake.build_command test to allow more cases
Do not use PROJECT_BINARY_DIR before it is defined. If it is not
defined when needed, fail with an error message suggesting that the
project() command be invoked first.
If CMAKE_MAKE_PROGRAM is not set fail with an error message instead of
crashing. Suggest calling project() or enable_language() first to
ensure that CMAKE_MAKE_PROGRAM is set.
Move the ErrorsOFF/ON common logic from CMakeLists.txt into an
ErrorsCommon file to allow other test cases to be added that do not use
the Errors test logic.
Commit 79568f95 (automoc: Add source file to target early to set the
linker language, 2013-02-20) changed automoc initialization to a two
step process. In the first step, the generated source file was added
to the target, which allows the link language to be determined.
However, this bypassed the check for the availability of Qt itself.
At build-time the automoc file could not be generated because the moc
tool was not available to create it.
The solution is to only add the automoc file to the target if Qt is
found.
The CMake language implicitly flattens lists so a ";" in a list element
must be escaped with a backslash. List expansion removes backslashes
escaping semicolons to leave raw semicolons in the values. Teach
ExternalData_Add_Test and ExternalData_Expand_Arguments to re-escape
semicolons found in list elements so the resulting argument lists work
as if constructed directly by the set() command.
For example:
ExternalData_Add_Test(Data NAME test1 COMMAND ... "a\\;b")
ExternalData_Expand_Arguments(Data args2 "c\\;d")
add_test(NAME test2 COMMAND ... ${args2})
should be equivalent to
set(args1 "a\\;b")
add_test(NAME test1 COMMAND ... ${args1})
set(args2 "c\\;d")
add_test(NAME test2 COMMAND ... ${args2})
which is equivalent to
add_test(NAME test1 COMMAND ... "a;b")
add_test(NAME test2 COMMAND ... "c;d")
Note that it is not possible to make ExternalData_Add_Test act exactly
like add_test when quoted arguments contain semicolons because the CMake
language flattens lists when constructing function ARGN values. This
re-escape approach at least allows test arguments to have semicolons.
While at it, teach ExternalData APIs to not transform "DATA{...;...}"
arguments because the contained semicolons are non-sensical.
Suggested-by: Jean-Christophe Fillion-Robin <jchris.fillionr@kitware.com>
Extend the range of valid target names with the + sign. This character
can commonly be used for target names, such as those containing 'c++'.
Add a test but skip it for Borland and Watcom tools which do not support
the character.
Suggested-By: Benjamin Kloster
12fb50d GetPrerequisites: Add documentation for objdump
8eb2fe9 GetPrerequisites: Enable test for BundleUtilities on MinGW
33c94c8 GetPrerequisites: Add support for objdump
5260a86 GetPrerequisites: Move tool search paths up
cbf0756 Revert "Add the TARGET_DEFINED generator expression"
21a342c Remove use of TARGET_DEFINED from the target_link_libraries test.
47b8d32 Remove use of TARGET_DEFINED from the ExportImport test.
2e39d21 Remove use of TARGET_DEFINED from target_include_directories test.
8dfdf1c Fix the tests for evaluating includes and defines.
98a6725 Fix constness of accessors.
7e70744 Expand includes and defines transitively in 'external' genexes.
d1a2729 Fix DAG checker finding cycling dependencies.
e72eaad Workaround broken code where a target has itself in its link iface.
ec2c67b Strip stray semicolons when evaluating generator expressions.
236133e Handle targets in the LINK_LIBRARIES of try_compile.
1c0597c Add a new Export generator for IMPORTED targets.
f2ab17d Keep track of all targets seen while evaluating a genex.
This reverts commit 2bee6f5ba5.
This expression is not used, and has a semantic which is not completely
optimal (namely considering utility targets to be targets, though
usually we are interested in linkable targets).
Remove it so that we have more freedom to define better expressions in
the future.
Conflicts:
Source/cmGeneratorExpressionEvaluator.cxx
Tests/CMakeCommands/target_compile_definitions/CMakeLists.txt
Tests/CMakeCommands/target_compile_definitions/consumer.cpp
Update the unit test introduced in commit 57175d55 (Only use early
evaluation termination for transitive properties., 2013-02-07) to
not use the expression, but still test the appropriate code.
Brad King
Stephen Kelly
Rolf Eike Beer
Modestas Vainius
Clinton Stimpson
John Farrier
Andreas Mohr
Petr Kmoch
Paul Kunysch
Jean-Christophe Fillion-Robin
James Bigler
Michael Tänzer