The generator name is "Xcode", not "XCode". Fix this typo. Explicitly
exclude the SubDirSpaces test on Xcode because it does not work. Also
tell the RunCMake.File_Generate test when Xcode is not multi-config so
it can exlcude the OutputConflict case.
Inspired-by: Daniele E. Domenichelli <daniele.domenichelli@iit.it>
Callers of cmTarget::GetLinkImplementationClosure are interested in the
set of targets whose interface properties propagate to the current
target. This excludes targets guarded by $<LINK_ONLY>.
Teach the CompatibleInterface test to cover suppression of interface
compatibility tests with $<LINK_ONLY>. Although this is not recommended
in practice, it is a way of covering the above behavior.
Previously this generator expression was used internally by the
target_link_libraries command to honor private linking requirements of
static libraries in their INTERFACE_LINK_LIBRARIES. Remove the check
that limits $<LINK_ONLY> to this use case to make it available for
project code to use too.
This adds support for memory and leak sanitizers. This is built into
clang and gcc 4.8 and new compilers. It is activated with a -f switch
during compile.
Fix cmTarget::GetSourceFiles to set EvaluateForBuildsystem on the
$<TARGET_PROPERTY:...,INTERFACE_SOURCES> generator expression so that
the $<TARGET_OBJECTS> generator expression is allowed within an
INTERFACE_SOURCES value.
Extend the InterfaceLibrary test to cover this case. Extend the
RunCMake.TargetObjects test to cover failure of $<TARGET_OBJECTS>
when used through $<TARGET_PROPERTY:...,INTERFACE_SOURCES> in a
non-buildsystem context.
This commit adds support for ThreadSanitizer to ctest. ThreadSanitizer
is part of the clang compiler and also gcc 4.8 and later. You have to
compile the code with special flags. Then your code gets the the
ThreadSanitizer ability built into it. To pass options to the
ThreadSanitizer you use an environment variable. This commit teaches
ctest to parse the output from ThreadSanitizer and send it to CDash.
Loosen this restriction on OBJECT libraries to allow source files of any
name to be generated by custom commands or listed for reference in IDE
projects so long as they would not affect linking of a normal library.
Update the rejection message to be more specific about the looser
restriction.
Extend the ObjectLibrary test to cover a ".cmake" file generated by a
custom command in an OBJECT library.
Use the AddInterfaceEntries helper to avoid duplication. In
TargetPropertyEntry, replace the TargetName string member with a
reference to the full cmLinkImplItem that produced the entry. This is
possible because the cmLinkImplItem is available in AddInterfaceEntries
(it was not available in GetIncludeDirectories). Having the full
cmLinkImplItem allows processIncludeDirectories to implement CMP0027 OLD
behavior without repeating the target name lookup.
Update the RunCMake.CompatibleInterface test DebugProperties case
expected output for the new order of the messages.
Move the subtests that test with local projects into their own test. The reason
is that on slower or crowded machines the test may reach the limit of 25
minutes and therefore fail while it would pass if it was given enough time.
The split is roughly 3:1 with regard to the execution time, with the new
ExternalProjectLocal test being the faster one.
Print the "timeout correctly killed" message using message(STATUS) so
that 'ctest -S' puts it in the same pipe as the rest of the test command
handler output. This ensures it shows up in the same order every time.
Commit v2.8.11~156^2~2 (Expand includes and defines transitively
in 'external' genexes., 2013-02-13) introduced a recursive loop
and a stack overflow during evaluation of a link implementation
which depends on a transitive property, such as
add_library(empty1 ...)
add_library(empty2 ...)
target_link_libraries(empty1
PRIVATE
$<$<STREQUAL:$<TARGET_PROPERTY:INCLUDE_DIRECTORIES>,/foo/bar>:empty2>
)
There is no use-case for code like that currently, but it should not
cause a stack overflow.
Avoid the recursion by reporting an error early if a case like this
is found.
A library or executable target that consists only of a reference to an
object library may have no sources to compile or custom commands to run.
The command in the target is the link (or archive) command. Add missing
order-only dependencies to link commands so that target ordering
dependencies are satisfied for it without depending on an intermediate
compilation rule.
Extend the ObjectLibrary test to cover this case.
Co-Author: Brad King <brad.king@kitware.com>
9998d78d Tests: Speed up RunCMake.include_directories test
6eee5d74 Tests: Drop broken and now unused RunCMake_TEST_FILE option
f0f15b93 Tests: Refactor RunCMake.include_directories to drop RunCMake_TEST_FILE
8707814e Tests: Refactor RunCMake.File_Generate to drop RunCMake_TEST_FILE
f0e298ad Help: Add notes for topic 'vs14-generator'
5c105140 Tests: Simplify LoadCommand tests
b1cbd577 FindBoost: Add -vc140 mangling for VS 14
bdc7d9c8 VS14: Fix Cl and Link flag tables as previous versions
d96b3f68 VS14: Generate flag tables from MSBuild v140 tool files
65624c39 VS14: Add Visual Studio 14 generator (#14982)
8635ac23 Tests/Preprocess: Remove unnecessary VS version tests
Remove unnecessary language initializations. Change the main
CMakeLists.txt project() call to specify NONE. Use enable_language(CXX)
instead of project() in cases that need it to avoid enabling C too.
We cannot use -DRunCMake_TEST=${RunCMake_TEST_FILE} because test cases
use project(${RunCMake_TEST}) and the project name cannot be a path to a
file. The parent and grandparent commits removed the only uses of the
option. Drop it now.
Drop out-of-place coverage of CheckFunctionExists module. The "printf"
symbol is not available on VS 14 without including the <stdio.h> header
to get a definition.
Call the generator "Visual Studio 14" without any year because this
version of VS does not provide a year in the product name.
Copy cmGlobalVisualStudio12Generator to cmGlobalVisualStudio14Generator
and update version numbers accordingly. Add the VS14 enumeration value.
Teach the platform module Windows-MSVC to set MSVC14 and document the
variable. Teach module InstallRequiredSystemLibraries to look for the VS
14 runtime libraries.
Teach tests CheckCompilerRelatedVariables, VSExternalInclude, and
RunCMake.GeneratorToolset to treat VS 14 as they do VS 10, 11, and 12.
Co-Author: Pawel Stopinski <diokhan@go2.pl>
f5c18c9c cmTarget: Drop GetDirectLinkLibraries methods
281eb3d8 cmTarget: Improve HaveBuildTreeRPATH implementation
d912220e cmTarget: Lookup targets in LinkInterface and LinkImplementation
edce4351 cmExportFileGenerator: Make SetImportLinkProperty a template
097be413 cmTarget: Add GetUtilityItems to get target ordering dependencies
4dad5fd2 cmTarget: Add cmLinkItem to refer to a target by name and pointer
a2723442 Fix scope of transitive target name lookups
069d60fe cmTarget: Add method to lookup other targets in a target's scope
47ab3ca6 cmTarget: Constify GetLinkImplementationClosure results
9f3ed029 cmTarget: Constify GetTransitivePropertyTargets results
6f0951af cmTarget: Drop 'head' target from GetImportInfo
0dc9e88d cmTarget: Remove 'head' argument from GetLinkImplementation
4ac72455 cmTarget: Drop 'head' argument from GetLinkClosure
bcdb7ff9 cmTarget: Remove 'head' argument from GetLinkerLanguage
bd9b667b cmComputeLinkInformation: Remove 'head' argument
06328dd5 cmTarget: Remove 'head' argument from GetLinkInformation
...
Since commit v2.8.12~436^2 (VS 10: Escape ; as %3B in preprocessor
definitions, 2013-04-11) the Tests/Preprocessor/CMakeLists.txt file no
longer uses the PP_VS1XX values, so stop setting them.
Installing large directories, e.g., the output of a doxygen run, prints
one line per file resulting in too much noise in the build output. Add
an option to the install(DIRECTORY) command to not print anything upon
make install.
Extend the RunCMake.install test with cases covering MESSAGE_NEVER
behavior of the install(DIRECTORY) command.
Suggested-by: Stefan Eilemann <Stefan.Eilemann@epfl.ch>
Create a variable to allow users to control which installation
messages are printed. In particular, provide a "LAZY" setting
that prints "Installing" messages but not "Up-to-date" messages.
This is desirable for incremental re-installations.
Suggested-by: J Decker <d3ck0r@gmail.com>
Create options "MESSAGE_ALWAYS", "MESSAGE_LAZY", and "MESSAGE_NEVER" to
specify whether to print the "Installing" and "Up-to-date" messages.
Extend the RunCMake.file test with cases covering these options.
Teach cmFileCopier::InstallDirectory to detect whether the destination
directory exists. If so, report it as "Up-to-date" instead of
"Installing". This resolves message asymmetry with file installations.
Extend the RunCMake.file and RunCMake.install tests to check the
installation output on both the first and second run.
Suggested-by: J Decker <d3ck0r@gmail.com>
Extend the cmake command-line interface to support
cmake -E env [--unset=NAME]... [NAME=VALUE]... COMMAND [ARG]...
This will be useful to run processes with modified environments
without using a shell or a full "cmake -P" script to wrap it.
Extend the RunCMake.CommandLine test to cover success and failure cases.
Inspired-by: Jonathan Bohren <jbo@jhu.edu>
In cmTarget, cmGeneratorTarget, and cmGeneratorExpressionEvaluator, fix
target name lookups to occur in the cmMakefile context of the target
that referenced the name, not the current 'head' target. The context
matters for imported targets because they are directory-scoped instead
of globally unique. We already do this in cmComputeLinkDepends and
cmComputeTargetDepends.
Extend the InterfaceLibrary test with an example covering this behavior.
cb67509b VS: Remove unused parameter of WriteTargetConfigurations
790e1677 VS: Fix subproject .sln dependencies on custom targets
5fba44cf VS: Move VS-only API out of cmGlobalGenerator
Each project listed in a .sln must be marked (or not) as part of the
"default build" for each configuration. For targets created by the
add_custom_target() command we add them to the default build if they
are not excluded in some way or if another target depends on them.
In the top-level .sln, a custom target is excluded if it is not
created with the ALL option to add_custom_target. In subdirectory
.sln files, a target may also be excluded if it is not within the
directory and is brought into the solution only due to a dependency
from another target in the solution.
Fix the "IsPartOfDefaultBuild" and "IsDependedOn" methods to check
every target to be included in the .sln for a dependency on the
custom target. Otherwise transitive dependencies through targets
not in the current subdirectory will not be considered.
Extend the SubProject test with a custom target to cover this case.
Reported-by: William Deurwaarder <William.Deurwaarder@tomtom.com>
Reported-by: Dirk Steenpass <dirk.steenpass@gmail.com>
Add the ability to parse the XML output of the Jacoco tool.
Jacoco (www.eclemma.org/jacoco) is a Java coverage tool.
Add and integrate a class for the parser and
include a test which utilizes the new parser.
ddec418a Features: Add compiler version support to WriteCompilerDetectionHeader.
b7029576 Project: Add configurable name for version computation macros.
78acaafe Project: Separate simulated compiler id from version detection.
567af1a5 WCDH: Issue a better message for version compatibility.
86be733f cmGeneratorExpression: Add workaround for Borland compiler
3495ab0a tests: update unused variable test expected output
2a1b2d84 backtrace: Convert to local paths in IssueMessage
a0829205 genex: remove the need for backtraces
efc20569 cmake: remove dummy backtraces for IssueMessage
d46c650d cmMakefile: return a backtrace
Xcode 1.5 does not support multiple configurations. The generator also
adds some sources internally that cause extra OriginDebug output.
Update the expected output to tolerate it.
Delay use of CMAKE_GENERATOR_TOOLSET until the CMakeSystem.cmake
file has been configured and loaded during the first project() or
enable_language() command. This gives the toolchain file named by
CMAKE_TOOLCHAIN_FILE a chance to set CMAKE_GENERATOR_TOOLSET. This
point is still early enough to set the generator toolset prior to
the initialization of any languages that might use the toolset.
The cmake::GeneratorToolset member variable remains an indication
of what was specified by the -T option or loaded from the cache.
It does not need to be updated based on the toolchain file setting.
The cmMakefile::TryCompile can still pass cmake::GeneratorToolset
into the inner instance because the try-compiled project will do
platform and language initialization using the CMakeSystem module
configured for the outer project.
Extend the RunCMake.GeneratorToolset test with cases that use a
toolchain file to set CMAKE_GENERATOR_TOOLSET.
Add support for Cobertura coverage files written by Java.
Add a test which uses the report from a Java run of Cobertura to calculate coverage.
In the documentation of CTEST_COVERAGE_COMMAND, give a sample .sh file to merge
the Cobertura .ser files and generate the XML report from the merged file.
If we fail to create the generator named by CMAKE_GENERATOR, exit
with an error message instead of crashing. While at it, fix the
wording of the error message when CMAKE_GENERATOR is not set.
Extend the RunCMake.CommandLine test with cases covering the
"cmake --build" option when the named directory does not provide
a CMakeCache.txt with a valid CMAKE_GENERATOR.
While tracing dependencies of a target, cmTargetTraceDependencies
follows sources by full path to determine if the source is to be
produced by a custom command. Commit 4959f341 (cmSourceFileLocation:
Collapse full path for directory comparisons., 2014-03-27) changed
the storage of target sources to be in the form of a normalized
path instead of an unnormalized path.
The path is followed by looking it up in a mapping via
cmMakefile::GetSourceFileWithOutput to acquire an appropriate
cmSourceFile. The mapping is populated with the OUTPUT components
of add_custom_command invocations, however it is populated with
unnormalized paths. This means that the tracing logic does not
find appropriate cmSourceFiles, and does not generate appropriate
build rules for the generated sources.
Normalize the paths in the OUTPUT components of add_custom_command
to resolve this.
The paths in the DEPENDS component of add_custom_command are also
not normalized, leading to the same problem again. Normalize the
depends paths after generator evaluation and expansion.
Teach set_property and get_property an "INSTALL" property type to be
associated with install-tree file paths. Make the properties available
to CPack for use during packaging. Add a "prop_inst" Sphinx domain
object type for documentation of such properties.
Write to the timeout test log file before sleeping and flush to be sure
it is created. Move the check that the after-sleep line is not written
out to the ctest script. Rename the CheckChild test to TestSleep since
it no longer checks. Do not try to read the log file if it does not
exist.
When CMP0053 is in WARN mode, variables get expanded twice, leaking the
fact that the string was expanded twice and changing behavior. Instead,
suppress variable watches when running the expansion to trigger the
CMP0053 warning.
Allow setting build properties based on the features available
for a target. The availability of features is determined at
generate-time by evaluating the link implementation.
Ensure that the <LANG>_STANDARD determined while evaluating
COMPILE_FEATURES in the link implementation is not lower than that
provided by the INTERFACE of the link implementation. This is
similar to handling of transitive properties such as
POSITION_INDEPENDENT_CODE.
The languages used in compiling STATIC libraries need to be propagated
to dependents regardless of the settings of INTERFACE_LINK_LIBRARIES or
CMP0022. They are independent of the libraries in the link interface.
Prior to commit v2.8.12~192^2~2 (Introduce the INTERFACE_LINK_LIBRARIES
property, 2013-06-04) the cmTarget::ComputeLinkInterface code path for
"explicitLibraries" could never be taken for STATIC libraries, so the
logic to propagate languages existed only in the non-explicitLibraries
code path. After that commit, INTERFACE_LINK_LIBRARIES could be set for
STATIC libraries to cause the "explicitLibraries" code path to be taken.
The commit also left the old non-explicitLibraries code path conditional
on CMP0022 not being set to NEW. Thus link language propagation was
left missing from two cases by that commit.
The explicitLibraries code path was fixed to propagate languages by
commit v2.8.12~149^2~1 (cmTarget: Fix iface libraries and languages for
static libraries, 2013-07-26). However, the non-explicitLibraries case
was never taught to propagate languages when CMP0022 is set to NEW. Fix
that now. Factor the logic to propagate link languages out of the link
interface libraries conditions so that it always occurs. Update
Tests/Fortran to set CMP0022 to NEW to test this case (because the test
passes only if link language propagation works).
The languages used in compiling STATIC libraries need to be propagated
to dependents regardless of the settings of INTERFACE_LINK_LIBRARIES or
CMP0022. They are independent of the libraries in the link interface.
Prior to commit v2.8.12~192^2~2 (Introduce the INTERFACE_LINK_LIBRARIES
property, 2013-06-04) the cmTarget::ComputeLinkInterface code path for
"explicitLibraries" could never be taken for STATIC libraries, so the
logic to propagate languages existed only in the non-explicitLibraries
code path. After that commit, INTERFACE_LINK_LIBRARIES could be set for
STATIC libraries to cause the "explicitLibraries" code path to be taken.
The commit also left the old non-explicitLibraries code path conditional
on CMP0022 not being set to NEW. Thus link language propagation was
left missing from two cases by that commit.
The explicitLibraries code path was fixed to propagate languages by
commit v2.8.12~149^2~1 (cmTarget: Fix iface libraries and languages for
static libraries, 2013-07-26). However, the non-explicitLibraries case
was never taught to propagate languages when CMP0022 is set to NEW. Fix
that now. Factor the logic to propagate link languages out of the link
interface libraries conditions so that it always occurs. Update
Tests/Fortran to set CMP0022 to NEW to test this case (because the test
passes only if link language propagation works).
Fix the MUMPS coverage parser:
* Account for tabs after entry points
* Stop double incrementing lines that have explicit calls to the 0 line
* If a line has been previously marked as non executable, but then
contains a count, increment it an extra one to push it back into
the executable code set.
Add a custom routine and corresponding coverage files in the test case.
This file is smaller and has cmcov/mcov files that have data for only
that routine.
Add source file properties to control Xcode file type attributes:
XCODE_EXPLICIT_FILE_TYPE => explicitFileType
XCODE_LAST_KNOWN_FILE_TYPE => lastKnownFileType
Add a RunCMake.XcodeProject test to verify generated project content.
Add properties and variables corresponding to CXX equivalents.
Add features for c_function_prototypes (C90), c_restrict (C99),
c_variadic_macros (C99) and c_static_assert (C11). This feature
set can be extended later.
Add a <PREFIX>_RESTRICT symbol define to WriteCompilerDetectionHeader
to conditionally represent the c_restrict feature.
Provide a function to write a portable header to detect compiler
features. Generate a preprocessor #error for unknown compilers
and compiler versions whose features are not yet recorded. This
error condition might be relaxed in the future, but for now it
is useful for verification of expectations.
ba387cb8 Help: Add notes for topic 'package-disable-registry'
be8ae960 Allow the Package Registry to be disabled (#14849)
d09fda5d Tests: Improve FindPackageTest for in-source builds
ac24a1c0 Tests: Improve FindPackageTest exported package version
When a project is packaged for redistribution the local package
registries should not be updated or consulted. They are for developers.
Add variables to disable use of package registries globally:
* CMAKE_EXPORT_NO_PACKAGE_REGISTRY that disables the export(PACKAGE)
command
* CMAKE_FIND_PACKAGE_NO_PACKAGE_REGISTRY that disables the User Package
Registry in all the find_package calls.
* CMAKE_FIND_PACKAGE_NO_SYSTEM_PACKAGE_REGISTRY that disables the
System Package Registry in all the find_package calls.
Update documentation and unit tests.
bc9a8bba Makefile: Undef FEATURE_STRING iteration define after use.
eb638c75 Tests: Make CompileFeatures feature list lang-specific.
e2f09aff CMakeConfigurableFile: Remove excess newline.
5109b042 Features: Fix GNU 4.8.1 version test.
6a9fdbeb Test: Parameterize the language in the CompileFeature test.
f5bf9d43 Tests: Make CompileFeature tests use highest standard known.
These policies should be checked at the call site that tries to access
the LOCATION or SOURCES property, not the directory scope containing the
target. Thread the caller context through cmTarget::GetProperty to use
for checking the policy setting and emitting a diagnostic with proper
backtrace.
Extend the RunCMake.CMP0026 and RunCMake.CMP0051 tests with
cross-directory cases.
This policy should be checked at the call site that tries to access the
LOCATION property, not the directory scope containing the target.
Thread the caller context through cmTarget::GetProperty to use for
checking the policy setting and emitting a diagnostic with proper
backtrace.
Extend the RunCMake.CMP0026 test with a cross-directory case.
Remove the use of check_cxx_source_compiles which is now just getting in
the way.
Blacklist the cxx_alignof feature in the test with GNU 4.7. The test
file compiles, but it is documented as available first in GNU 4.8.
Include tests for:
- @ expansion during normal execution
- various characters in variable names for comparison between the new
and the old parser
- corner cases in the parsers
- correct messages when behavior is different
205215fb cmTarget: Add CXX_STANDARD_REQUIRED to control decay.
1df2116b Features: Decay language flag if requested is not available.
c4f4dac2 Project: Fix exit-on-error with compile feature tests.
5bb7ce72 Project: Use nullary form of main for compile feature tests.
64254e7a Project: Remove extern from static string in feature tests.
0d9c99bf Help: Fix order of help entries.
dc7639bd Tests: Fix name of cache variable.
If creation of the global generator fails, return early with an error
message instead of trying to use the generator and crashing.
Add a CTestTestBadGenerator test to cover this case.
Reported-by: Mathieu Malaterre <malat@debian.org>
Bug-Debian: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=747306
Commit b8af2011 (cmTarget: Fix listing of source files at
configure-time., 2014-04-13) refactored a GetObjectLibrariesCMP0026
method out of GetLanguages. In flight, a conditional use of a target
if available was changed to an assert-available.
This code is only used to read the LOCATION property at configure
time, when the link information is incomplete, and not all targets
are defined, so the assert is inappropriate, even though it can lead
to incorrect information being generated. CMP0026 warns about the
potentially incorrect information anyway.
Old versions of aCC need a special compiler flag to get full C++98 template
support as e.g. CMake itself or the Complex and ComplexOneConfig tests need.
The same versions need a special flag to get a proper C++ library, too.
8d0b1cca Features: FATAL_ERROR on compilers with no recorded features.
447fbb3f Tests: Execute compile features tests unconditionally.
597bb72e Tests: Run RunCMake.target_compile_features unconditionally.
Users of the new target_compile_features command are expected to
check the existence of the CMAKE_CXX_COMPILE_FEATURES variable before
attempting to use it to require features.
When the primary source tree path named by a DATA{} reference does not
exist, produce an AUTHOR_WARNING instead of a FATAL_ERROR. This is
useful when writing a new DATA{} reference to a test reference output
that has not been created yet. This way the developer can run the test,
manually verify the output, and then copy it into place to provide the
reference and eliminate the warning.
If the named source tree path is expected to be a file but exists as a
directory, we still need to produce a FATAL_ERROR.
f21ac16e Replace MATCHES test on numbers with EQUAL test
7eacbaed Replace MATCHES ".+" tests with NOT STREQUAL ""
3a71d34c Use CMAKE_SYSTEM_NAME instead of CMAKE_SYSTEM where sufficient
b0b4b460 Remove .* expressions from beginning and end of MATCHES regexs
5bd48ac5 Replace string(REGEX REPLACE) with string(REPLACE) where possible
2622bc3f Clean up usage of if(... MATCHES regex) followed string(REGEX REPLACE regex)
The matches have already been calculated and can simply be taken from
CMAKE_MATCH_n variables. This avoids multiple compilations of the same or very
similar regular expressions.
Since commit e5da9e51 (cmTarget: Allow any generator expression in
SOURCES property., 2014-03-18), source files are computed by
true evaluation of generator expressions, including TARGET_OBJECTS.
This evaluation requires the presence of cmGeneratorTarget objects
since commit bf98cc25 (Genex: Evaluate TARGET_OBJECTS as a normal
expression., 2014-02-26).
Ensure that we don't attempt to evaluate the TARGET_OBJECTS generator
expression at configure-time, as can happen if CMP0024 or CMP0026
are OLD. Use old-style parsing of the source item to extract
object target names in that case.
Avoid calling GetProperty("SOURCES") to bypass warnings from CMP0051.
Refactor existing logic in GetLanguages which is similar in intent to
the new GetSourceFiles code.
Allow directories in the source tree or build tree only if the
install tree is a subdirectory of the source tree or build tree,
as appropriate.
Re-use the test files in the RunCMake.include_directories test
to run in multiple scenarios. Bump the required CMake version
in the test to 3.0 to ensure that the new policy warnings are
emitted correctly.
Expect cxx_variadic_templates to implement N2555.
N2555 is essentially a bugfix and predates most compiler releases which
aimed to experimentally support variadic templates.
This can be used to set the compiler features required by particular
targets. An error is issued at CMake time if the compiler does not
support the required feature. If a language dialect flag is required
by the features used, that will be added automatically.
Base the target_compile_features command on cmTargetPropCommandBase. This
gives us 'free' handling of IMPORTED, ALIAS, INTERFACE, non-compilable
and missing targets.
Extend the interface of the target_compile_features command with
PUBLIC and INTERFACE keywords. Populate the INTERFACE_COMPILER_FEATURES
target property if they are set. Consume the INTERFACE_COMPILER_FEATURES
target property from linked dependent targets to determine the final
required compiler features and the compile flag, if needed.
Use the same pattern of origin-debugging which is used for other
build properties.
Record the availability of this feature for GNU 4.8 on (UNIX AND
NOT APPLE) only. In the future, availability can be recorded for
earlier GNU, for other platforms and for other compilers. Initially
the affected configurations are as restricted as possible to allow
for easy testing while extending the features vector in only one
dimension.
The error message when using the set_property API directly is not
very good, but follow up commits will provide origin debugging of
the property and a target_compile_features command which will
provide a configure-time backtrace when possible.
This will allow decoupling the name of the test from the name and
location of the source file under test, which means one source
file can be used for multiple tests.
Rename the PARENT_SCOPE test in RunCMake.set to not use a keyword
of the if() command as a file name. As the filename is now used
with an if condition, this causes a conflict.
On OS X 10.9 the system libcurl has a different error message when
failing to connect:
Failed connect to :21; Connection refused
Match this message to pass the test.
9407174b target_sources: New command to add sources to target.
81ad69e0 Make the SOURCES target property writable.
6e636f2e cmTarget: Make the SOURCES origin tracable.
3676fb49 cmTarget: Allow transitive evaluation of SOURCES property.
e6971df6 cmTarget: Make the source files depend on the config.
df753df9 cmGeneratorTarget: Don't add computed sources to the target.
869328aa cmComputeTargetDepends: Use valid config to compute target depends.
5de63265 Genex: Only evaluate TARGET_OBJECTS to determine target sources.
aa0a3562 cmGeneratorTarget: Compute target objects on demand
042c1c83 cmTarget: Compute languages from object libraries on demand.
fdcefe3c cmGeneratorTarget: Compute consumed object libraries on demand.
c355d108 cmComputeTargetDepends: Track object library depends.
e5da9e51 cmTarget: Allow any generator expression in SOURCES property.
5702e106 cmTarget: Include TARGET_OBJECTS genex in target SOURCES property.
857d30b5 cmGlobalGenerator: Add interface to call ForceLinkerLanguages
28e1d2f8 cmStringCommand: Add GENEX_STRIP subcommand.
bf98cc25 Genex: Evaluate TARGET_OBJECTS as a normal expression.
8cd113ad cmTarget: Store strings instead of cmSourceFile* to represent SOURCES.
4959f341 cmSourceFileLocation: Collapse full path for directory comparisons.
fcc92878 cmSourceFileLocation: Remove unused Update method.
59e8740a cmTarget: Remove AddSourceFile method
26d494ba cmTarget: Use string API to add sources to cmTarget objects.
d38423ec cmTarget: Add a method to obtain list of filenames for sources.
...
Extend the cmGeneratorExpressionDAGChecker with an interface
returning the name of the top target. Use that to determine
when there is a DAG violation, as required by the RunCMake.Languages
tests.
Disallow the use of config-specific source files with
the Visual Studio and Xcode generators. They don't have
any way to represent the condition currently.
Use the same common-config API in cmQtAutoGenerators. While
it accepts config-specific files, it doesn't have to support
multiple configurations yet.
Loop over the configs in cmTargetTraceDependencies
and cmGlobalGenerator::WriteSummary and consume all source
files.
Loop over the configs in cmComputeTargetDepends and compute the
object library dependencies for each config.
The output of this expression may contain macros for IDEs to replace
such as $(Configuration), $(CURRENT_ARCH) etc. To avoid generating
content which is not usable in other contexts, report an error if
there is an attempt to use it in other contexts.
This commit may be reverted in the future if a solution to the
above difference is implemented.
Remove use of UseObjectLibraries from Makefile and Ninja generators. It
is not needed now because those generators use GetExternalObjects
which already contains the objects from object libraries.
The VS10 generator calls both the UseObjectLibraries and the GetExternalObjects
methods. Ensure that duplicates are not created by skipping objects
from object libraries in handling of GetExternalObjects.
Similarly, fix VS6, VS7 and Xcode object handling by skipping
external objects from OBJECT_LIBRARY usage as appropriate.
The error message in the BadSourceExpression1 test is now reported
by the generator expression evaluator, so it has different text.
Don't store a mapping of the directory to the ui file. The directory
will be a unique key, allowing only one ui file to be specified.
Use the source file name instead as the mapping key.
The rcc tool generates a cpp file with a symbol called qInitResources
or called qInitResources_${name}, if the name is passed. The
qInitResources symbol clashes if multiple qrc files are used in
one target.
Always pass the name to ensure that the symbol is unique. This is also
the behavior of the qtx_add_resource macros.
Since commit v2.8.12~327^2 (Qt4Macros: Allow specifying a TARGET
in invokations of macros., 2013-02-26), a parameters file is
populated with moc arguments at generate-time.
When the compile definitions or include directories change, the
parameters file is updated but moc is not re-run in response.
Fix that by making the moc invocation depend on the parameters file.
Reported-At: https://bugreports.qt-project.org/browse/QTBUG-36970
Rely on evaluation in cmCustomCommandGenerator for the generators.
When tracing target dependencies, depend on the union of dependencies
for all configurations.
Repeated "cmake . && ninja" calls were resulting in rebuilds every time.
Change the test so that it uses "file(WRITE" to generate a ".in" file and
then configure_file to "copy if different" that ".in" file to the final
generated source file.
Now, rebuilds will only occur if there are changes to the generated source
file on "cmake ." runs after the first one.
The FindKDE4 module (incorrectly) modifies CMAKE_MODULE_PATH on the
caller's behalf. This causes KDE4-installed find modules to be used by
the test instead of those in CMake. Teach the test to restore the
CMAKE_MODULE_PATH to its original value after each find_package call.
This ensures that the next find_package actually tests our module.
Use CMAKE_PREFIX_PATH, CMAKE_FRAMEWORK_PATH, and CMAKE_APPBUNDLE_PATH
cache and environment variables to extend PKG_CONFIG_PATH before calling
pkg-config.
In each of the path in these variables it searches for lib/pkgconfig.
Then, depending on the system, it searches for
lib/${CMAKE_LIBRARY_ARCHITECTURE}/pkgconfig (debian) or for
lib64/pkgconfig (other 64 bit unixes). If any of these path is found,
it is appended to the PKG_CONFIG_PATH enviromnent variable.
Add two new arguments to the pkg_check_module and pkg_search_module
macro, NO_CMAKE_PATH and NO_CMAKE_ENVIRONMENT_PATH. The new signature
are therefore:
pkg_check_modules(<PREFIX> [REQUIRED] [QUIET]
[NO_CMAKE_PATH] [NO_CMAKE_ENVIRONMENT_PATH]
<MODULE> [<MODULE>]*)
pkg_search_module(<PREFIX> [REQUIRED] [QUIET]
[NO_CMAKE_PATH] [NO_CMAKE_ENVIRONMENT_PATH]
<MODULE> [<MODULE>]*)
By default, if CMAKE_MINIMUM_REQUIRED_VERSION is 3.1 or later (in
order to keep compatibility with the previous behavior), or if
PKG_CONFIG_USE_CMAKE_PREFIX_PATH is set, the CMAKE_PREFIX_PATH,
CMAKE_FRAMEWORK_PATH, and CMAKE_APPBUNDLE_PATH cache and environment
variables will be added to pkgconfig search path.
The NO_CMAKE_PATH and NO_CMAKE_ENVIRONMENT_PATH arguments disable this
behavior for the cache variables and the environment variables,
respectively, similarly to the find_package() command.
Restore support for the undocumented <CONFIG>_LOCATION target property
removed by commit v3.0.0-rc1~175^2 (cmTarget: Remove support for
<CONFIG>_LOCATION property, 2013-12-30) as part of the CMP0026 OLD
behavior.
Visual Studio is handled as a special case for autogen depends. However,
the special handling works only for target dependencies, not file
dependencies output by a custom command.
Use a PRE_BUILD step only if all depends are targets.
b633b263 CPackWiX: Fix test to build with expected config
191f25e2 stringapi: Prevent a NULL dereference in WiX
219d6ad6 speedup: Avoid excess iterator dereferences
caaad357 speedup: Cache strings for comparisons
7abf4e31 stringapi: Use strings for dependency information
94fc63e2 stringapi: Use strings for cache iterator values
85fc9f26 stringapi: Command names
6557382d stringapi: Use strings for program paths
1a1b737c stringapi: Use strings for generator names
24b5e93d stringapi: Use strings for directories
11ed3e2c stringapi: Add string overload for the Def struct
b3bf31a5 stringapi: Miscellaneous char* parameters
5af95c39 typo: Match argument name with the header
2b17626e stringapi: Pass strings as install directories in CPack
3def29da stringapi: Use strings for feature arguments
acb116e3 stringapi: Return a string reference for the configuration
...
Casts from std::string -> cmStdString were high on the list of things
taking up time. Avoid such implicit casts across function calls by just
using std::string everywhere.
The comment that the symbol name is too long is no longer relevant since
modern debuggers alias the templates anyways and the size is a
non-issue since the underlying methods are generated since it's
inherited.
Since commit 71b14dcb (Utilities/Release: Do not upload doc staging
tarball, 2014-02-26) the prefix upload_release.cmake computes does not
match any files when used with -DVERSION=master as has been done for the
nightly binary builds. Since the version is not actually 'master'
anyway, change the nightly binary upload logic to explicitly pass the
destination directory. Do not pass any VERSION so the default is taken
and matches the binaries.
9608ef6f Tests: Optionally configure tests exclusively, with an external CMake
9f5bd180 Tests: Drop CMAKE_TEST_GENERATOR(|_TOOLSET) variables
76477267 Tests: Drop CMAKE_TEST_MAKEPROGRAM variable
a8a9fb7e Tests: Rename CMAKE_TEST_MAKEPROGRAM uses for explicit make program
40475573 Tests: Rename CMAKE_TEST_MAKEPROGRAM uses for nested test projects
f99734b2 Tests: Rename CMAKE_TEST_DEVENV -> CMake_TEST_DEVENV
3c01ee5a Tests: Drop CMAKE_TEST_MSVC and test MSVC directly
daf0a5fe Tests: Drop CMAKE_TEST_GENERATOR and CMAKE_TEST_MAKEPROGRAM options
e5096312 Tests: Drop kwsys test
When running CMake from the build tree the CMAKE_ROOT is the
entire source tree. Fix the CMP0017 check to be specific to
the Modules/ directory under CMAKE_ROOT so that Tests/ does
not count. Fix the FindPackageTest modules to include FPHSA
by full path from CMAKE_ROOT so that they do not include the
local FPHSA which reports an error meant to test that CMP0017
works.
Add an undocumented CMake_TEST_EXTERNAL_CMAKE option to name an external
CMake 'bin' directory. Skip all main CMake binary builds and instead
configure the Tests directory to run using the external CMake provided.
This will provide a means to exercise the CMake test suite generating
for target platforms and compilers with which the CMake source does not
build. That will allow us to raise the level of C++ features required
of a compiler to build our source while retaining tests for generating
projects with older compiler tools.
In the ExportImport, Fortran, and MacRuntimePath tests the
CMAKE_TEST_MAKEPROGRAM variable is used to pass an explicit request for
a CMAKE_MAKE_PROGRAM value to be used when building the inner projects.
Rename these use cases to CMake_TEST_NESTED_MAKE_PROGRAM.
Follow the convention of naming variables related to the CMake build
itself as "CMake_" rather than "CMAKE_". While at it, consolidate the
code computing CMake_TEST_DEVENV to be more localized.
Drop the option to test with a different generator and make program than
was used to build. This was used only to test support for the Open
Watcom compiler which at one time could not build CMake. Instead we
will allow CMake to be configured to skip building binaries and just run
the test suite using an external CMake (in a future change).
For now leave the two option variables hard-coded to the old option
defaults until code can be updated to stop using them.
KWSys now has its own dashboard and test clients that run on all the
machines where we test CMake. We no longer need a test inside CMake to
test KWSys independently.
On OS X we pass -DCMAKE_POLICY_DEFAULT_CMP0025=NEW to all tests.
Once tests start using cmake_minimum_required(VERSION 3.0) then
CMake will warn that CMAKE_POLICY_DEFAULT_CMP0025 is unused.
These warnings are not part of the expected test output and can
cause such tests to fail. Pass --no-warn-unused-cli to each test
cmake invocation to tell it not to produce these warnings.
Since commit v2.8.12~437^2~2 (VS: Separate compiler and linker PDB files
2013-04-05) we no longer set /Fd with the PDB_NAME or PDB_OUTPUT_DIRECTORY
properties. Those properties now exclusively handle linker PDB files.
Since STATIC libraries do not link their compiler PDB file becomes more
important. Add new target properties "COMPILE_PDB_NAME[_<CONFIG>]" and
"COMPILE_PDB_OUTPUT_DIRECTORY[_<CONFIG>]" to specify the compiler PDB
file location and pass the value to the MSVC /Fd option.
f9d5b1fd Handle Mac OSX source flags for individual files lazily.
64d39841 cmGeneratorTarget: Classify sources on demand, not up front.
d3682d86 cmGeneratorTarget: Use a method to access the definition file.
5771f81d cmTarget: Add GetTransitiveTargetClosure method.
a6dd4990 cmTarget: Create a temporary cmTarget in checkInterfacePropertyCompatibility
b8b99cc1 cmTarget: Avoid computing languages when computing transitive targets.
01bca553 cmTarget: Move ComputeLinkInterface to the internal class.
d93e1af2 cmTarget: Extract a ComputeLinkInterfaceLibraries method.
3bcb197c cmTarget: Re-arrange the ComputeLinkInterface method.
326d07d2 cmTarget: Extract a ComputeLinkImplementationLanguages method.
21e91350 cmTarget: Change GetTransitivePropertyLinkLibraries to output targets.
f81eb49e cmTarget: Find source files on request.
84e5f5a0 cmTarget: Move SourceFileFlags to cmGeneratorTarget.
Replace calls to GetLinkInformation with calls to a method to get only
the target closure, not the link languages etc. The replaced calls
are used while evaluating generator expressions only. This makes
transitive generator expression evaluation independent from
the languages of a target. In a follow-up topic, it will be possible
to make the languages depend on generator expression evaluation, via
evaluation of the SOURCES and INTERFACE_SOURCES target properties.
Because the order of entries is not the same as the final link line,
the order of debug output is different in the RunCMake.CompatibleInterface
test, because the BOOL_PROP7 target property is evaluated first. Adjust
the test to account for that new order.
Teach the install(FILES) and install(PROGRAMS) commands to evaluate
generator expressions in the list of files.
Extend the ExportImport test to cover installation cases involving
generator expressions.
There are some corner cases in variable expansion which would be nice to
capture before going and rewriting the variable expansion code. The
majority of these are related to configuring files and strings with '@'
in them in conjunction with @ONLY being specified. Another is testing
for '(' usage inside of ENV variable references based on whether it is
quoted or not.
Teach ExternalProject_Add a new BUILD_ALWAYS option to skip using
the build step stamp file and execute the step on every build.
Extend the BuildDepends test with a case to cover this option.
4b7f2f52 Help: Add hyperlink targets for argument types in cmake-language(7)
113df227 Remove ChangeLog.manual
79f55909 Remove ChangeLog.txt
d25dbc90 Tests/BundleTest: Drop use of ChangeLog.txt
This has to be tested separately from the invalid_signature test because
target sources are evaluate at a later time, and earlier errors in the
invalid_signature test cause early exit.
Enable the C and CXX languages only in the test cases that really need
them. In the failure cases we do not get far enough to really use the
languages, so skip enabling them.
The qtx_add_resources() macro adds the resource file to the output list
to maintain file-level dependencies. Having the qrc file in a target
sources is a precondition for AUTORCC to function.
When processing the source files of a target, only add the generated
qrc_<file>.cpp to the target sources if AUTORCC is ON. This avoids
pre-porting conflict with the macro.
Reported-by: Micha Hergarden
41d2f2c4 write_basic_package_version_file: use PROJECT_VERSION
7e142c5a project: Manage VERSION variables
16d040c9 project: Add optional LANGUAGES keyword
00007dcc Help: Format project command and variable documentation
Commit 321e348e (QtAutogen: Use Qt 4 IMPORTED targets to find
executable locations., 2014-01-24) attempted to fix this problem,
but only solved it for a particular ordering of find_package for
Qt 4 and Qt 5.
Add a test to ensure that it works with both orderings.
f7ae1d8a QtAutogen: Short-circut some logic when moc is not available.
4b989d5f QtAutogen: Separate source file processing from AUTOMOC.
c48d877d QtAutogen: Make some methods appropriately file-static.
394e86df QtAutogen: Fix autouic target options in the presence of a config.
964d7f2a QtAutogen: Remove unused variables.
0d934efd QtAutogen: Remove read of SKIP_AUTOUIC target property.
321e348e QtAutogen: Use Qt 4 IMPORTED targets to find executable locations.
e96683b0 Qt4: Use IMPORTED executable names with custom commands.
e6182f5d Qt4: Create IMPORTED executable targets for all Qt executables.
Teach the project() command to set variables
{PROJECT,<PROJECT-NAME>}_VERSION{,_MAJOR,_MINOR,_PATCH,_TWEAK}
holding the project version number and its components. Add project()
command option "VERSION" to specify the version explicitly, and default
to the empty string when it is not given.
Since this clears variables when no VERSION is given, this may change
behavior for existing projects that set the version variables themselves
prior to calling project(). Add policy CMP0048 for compatibility.
Suggested-by: Alex Neundorf <neundorf@kde.org>
Teach the project() command to recognize an optional "LANGUAGES"
keyword after the project name and prior to the list of languages.
Do not allow multiple copies of the keyword. If the keyword is
specified and no languages are listed, imply NONE.
Set the minimum required version of CMake high enough to avoid the
warning for CMAKE_LEGACY_CYGWIN_WIN32. The warning appears on stderr
and breaks the expected output matching.
Avoid using the moc from Qt 5 with Qt 4 based targets. Moc generates
a version check to ensure that such generated code does not compile.
The Qt4And5Automoc unit test should have been testing this, but it
was not because the test was broken. In that unit test, moc was run
on trivial files which have no significant content, and in particular
no Q_OBJECT macro. Therefore moc was generating empty files which
do not even contain the version check. Fix this by generating files
for input to moc at cmake time.
a432b93b file DOWNLOAD: Display the curl result status when a hash mismatch occurs.
1cb9ef81 file DOWNLOAD: Test non-zero return status.
f73f0fb3 file DOWNLOAD: Add test for bad hash.
b5e2265f ExternalProject: Reattempt download when verification fails.
Mark unknown revisions as such and fail instead of reporting revision 0.
Otherwise CTest reports massive file updates between revisions when the
server timeouts while trying to fetch the current revision number.
Define a new 'CMAKE_CONFIGURE_DEPENDS' directory property that projects
can use to specify input files to the CMake configuration process.
Extend the RunCMake.Configure test to verify that the build system
re-runs CMake when this input changes.
Extend the RunCMake.Configure with a case to verify that the CMake
configuration process does not immediately re-run the first time that
the generated build system is invoked.
The logic added by commit ffc0b5e4 (Overwrite the symlink if it already
exists, 2007-02-15) does not recognize and remove existing broken links
before replacing them. Improve the logic to remove any existing
destination file or link (but not directory). On failure, report an
error message explaining why the existing path could not be removed or
the new one could not be created.
Add a RunCMake.CommandLine test to cover 'cmake -E' cases. Start with
test cases covering 'cmake -E create_symlink' behavior on UNIX platforms.
Add a 'run_cmake_command' function that can be used by tests to run a
given command-line and check the results rather than always running a
CMake configuration process. This can be used in the future to test
'cmake -E' for example.
The all target was depending on the clean and pngtest targets, but
when running the tests with -jN, those can be executed out of order.
Make the main.o target depend on the clean target instead to fix
this.
73e9340 get_target_property: Error on non-existent target.
ab9f58f FindQt4: Ensure target exists before calling get_target_property.
37ebeb9 FindQt4: Fix use of get_target_property to use actual target name.
6aabb6a Genex: Use case-sensitive comparison for COMPILER_ID.
5bb53f6 cmTarget: Deprecate COMPILE_DEFINITIONS_ properties with a policy.
This is consistent with other similar expressions such as PLATFORM_ID,
and makes the CONFIGURATION expression obsolete.
Fix an off-by-one error in
GeneratorExpressionContent::EvaluateParameters exposed by a unit test.
Remove the test for 'bad' nullary use of $<CONFIG>.
Add a unit test to verify that $<CONFIG> and $<CONFIGURATION> have
the same value.
As a new feature it does not need to participate in CMP0024.
Store cmExportBuildFileGenerator instances which correspond to the
export(EXPORT) signature in a second map which does not own the
pointers. This avoids the need to add cmExportBuildFileGenerator
and dependencies to the bootstrap system.
Direct users of IMPORTED targets treat INTERFACE_INCLUDE_DIRECTORIES
as SYSTEM, after commit a63fcbcb (Always consider includes from IMPORTED
targets to be SYSTEM., 2013-08-29). It was intended that transitive
use of an IMPORTED target would have the same behavior, but that
did not work. The implementation processed only direct dependencies
in cmTarget::FinalizeSystemIncludeDirectories.
Implement transitive evaluation of dependencies by traversing the
link interface of each target in the link implementation.
Test that it is an error to read a number-compatible property to
determine the link implementation. An alternative would be to
consider the value to be "0", however, that is too arbitrary
given the use-cases of this feature. Values from this feature may
be used in setting a define, where "0" may have special or invalid
meaning and should be explicit.
If the dependent target sets the property to boolean false, ensure
that that appears in the debug report. Previously, the report
output contained whether the property was consistent among dependencies,
displaying 'TRUE', instead of the content of the property, which may
be 'FALSE'.
Return a std::pair from the consistentProperty method. This makes
it possible to make the return value for string types easier to
reason about. The return value of consistentProperty was previously
set to an empty static string to emulate a 'true' value for the caller
in commit 816b4a8a (cmTarget: Make consistentProperty
return consistent content., 2013-10-22). The pair makes the
consistency result properly typed.
Don't refer to 'both', but a 'mixture'. List all compatible interface
property types possible.
Add another test for a mixture of three compatibilities.
The include_directories() and add_compile_options() commands
should not append to the corresponding target property for IMPORTED
targets. This is already the case for add_definitions().
Teach the export command to handle export sets defined by invocations
of install(TARGETS ... EXPORT foo). This makes maintenance of targets
exported to both the build tree and install tree trivial.
The first regression resulted in endless looping due to unrun test
dependencies. The second regression prioritized all tests with dependencies
in serial test runs.
Added a new variable CPACK_WIX_PATCH_FILE that users can point at an
XML patch file. Fragments defined within the patch file will be inserted
at supported insertion points (currently Component, File and Directory).
Instead of running many small tests with many cmake projects, simply
compare the generated export header against a reference.
Remove the helper macros and the try_compiles which are duplicates
of the library build tests.
Commit b04f3b9a (Create make rules for INTERFACE_LIBRARY
targets., 2013-08-21) extended the makefile generator to create
build targets for INTERFACE_LIBRARY targets. No other generators
were extended with this feature.
This conflicts with the feature of whitelisting of target properties
read from INTERFACE_LIBRARY targets. The INTERFACE_* properties
of the INTERFACE_LIBRARY may legitimately contain TARGET_PROPERTY
generator expressions for reading properties from the 'head target'.
The 'head target' would be the INTERFACE_LIBRARY itself when creating
the build rules for it, which means that non-whitelisted properties
would be read.
The INTERFACE_LIBRARY type does not have any LOCATION at all, so
return early from GetMappedConfig. GetMappedConfig is called from
two locations, one of which already pre-checks the INTERFACE_LIBRARY
case. Remove that pre-check and handle that case inside the method
instead.
77f3772 cmTarget: Require a compatible INTERFACE_AUTOUIC_OPTIONS from dependencies.
2e60b5f cmTarget: Report origin of COMPATIBLE_INTERFACE properties.
Revert the origin-tracking infrastructure from commit 98093c45 (QtAutoUic:
Add INTERFACE_AUTOUIC_OPTIONS target property., 2013-11-20). Use the
compatibility-tracking for compatible strings instead.
If two different dependencies require different AUTOUIC_OPTIONS,
cmake will now appropriately issue an error.
Since commit fd6076d0 (Tests: Pass CMAKE_MAKE_PROGRAM instead of
--build-makeprogram, 2013-11-15) the ExportImport, Fortran, and
MacRuntimePath tests use the value of CMAKE_TEST_MAKEPROGRAM as the
CMAKE_MAKE_PROGRAM for their nested projects configurations.
Teach these tests to initialize CMAKE_TEST_MAKEPROGRAM when it is
not provided, such as when building the tests manually.
Commit 66b290e7 (export(): Process the export() command at generate
time., 2012-10-06 ) refactored export() so that it could evaluate
strings at generate-time. This was intended for evaluating target
properties, but that commit also removed a check for target
existence at configure-time. Restore that check and add a test for
this case.
98093c4 QtAutoUic: Add INTERFACE_AUTOUIC_OPTIONS target property.
02542b4 QtAutoUic: Handle new -include command line parameter.
1242f4e Genex: Add {UPPER,LOWER}_CASE and MAKE_C_IDENTIFIER.
754b321 QtAutogen: Use config without prefix in map key.
5838aba Export: Report error on relative include with genex.
7a3e45b Export: Prefix relative items with genexes in INSTALL_INTERFACE.
f088a32 Export: Process INSTALL_INTERFACE in INCLUDES DESTINATION.
9eedc85 Export: Process relative includes after genex evaluation.
80790f3 Export: Test existing behavior of exporting includes with genexes.
38afc82 target_include_directories: Allow relative path with genex
Transitively consume the property from linked dependents.
Implement configuration-specific support by following the pattern
set out for compile definitions and includes in cmQtAutoGenerators.
Implement support for origin-tracking with CMAKE_DEBUG_TARGET_PROPERTIES.
This is motivated by the needs of KDE, which provides a separate
translation system based on gettext instead of the Qt linguist
translation system. The Qt uic tool provides command line options
for configuring the method used to translate text, and to add an
include directive to the generated file to provide the method.
http://thread.gmane.org/gmane.comp.kde.devel.frameworks/7930/focus=7992
Implement the interface to provide the uic options as a usage-requirement
on the KI18n target, as designed for KDE.
Creates a hierarchy of WiX features from CPack components and component groups.
Switch to the FeatureTree UI in case components have been defined.
Handles the component REQUIRE and HIDDEN options
and the component group EXPANDED option.
Diagnostics which check the sanity of exported include paths
previously skipped over any path containing a generator expression.
Introduce a policy to issue an error message in such cases.
The export files created in the OLD behavior are not usable, because
they contain relative paths or paths to the source or build location
which are not suitable for use on installation. CMake will report an
error on import.
Code such as
target_include_directories(foo INTERFACE
$<INSTALL_INTERFACE:include$<FOO>>
)
should be treated as a relative directory, despite the genex, after
the INSTALL_INTERFACE is stripped away.
Previously, this would generate a relative directory on export, which
would be an error on import, so no policy is needed.
Code such as
install(TARGETS ...
INCLUDES DESTINATION $<INSTALL_INTERFACE:include>
)
should behave as if the INSTALL_INTERFACE wrapper were not present.
In code such as
install(TARGETS ...
INCLUDES DESTINATION $<FOO>include
)
the generator expressions are evaluated at generate-time. Delay
determining whether each entry is a relative path until after
the generator expressions are evaluated. Such relative paths
are based relative to the CMAKE_INSTALL_PREFIX.
Treat paths which are relative and which contain a generator
expression which is not at the beginning as relative to the
source directory.
This matches the behavior of paths which are relative but contain
no generator expression at all.
Previously this would generate a relative path with the IMPORTED
target on export(), which would be a reported as a non-existent
path on import. If used directly in the buildsystem, it would be
reported as a relative path, which is also an error. There is no
need for a policy in this case.
This variable can be useful in cross-compiling contexts where the
sysroot is read-only or where the sysroot should otherwise remain
pristine.
If the new CMAKE_STAGING_PREFIX variable is set, it is used instead
of CMAKE_INSTALL_PREFIX when generating the installation rules in
cmake_install.cmake.
This way, the CMAKE_INSTALL_PREFIX variable
always refers to the installation prefix on the target device, regardless
of whether host==target.
If any -rpath paths passed to the linker contain the CMAKE_STAGING_PREFIX,
the matching path fragments are replaced with the CMAKE_INSTALL_PREFIX.
Matching paths in the -rpath-link are not transformed.
The cross-prefix usr-move workaround is assumed not to require extension
regarding CMAKE_STAGING_PREFIX. The staging area is a single prefix, so
there is no scope for cross-prefix symlinks. The CMAKE_INSTALL_PREFIX
is still used to determine the workaround path, and that variable
remains the relevant one even if CMAKE_STAGING_PREFIX is used. If the
generated export files are deployed to the target, the workaround
will still be in place, and still be employed if required.
4cce44b Help: Document the CMAKE_MAKE_PROGRAM variable in more detail
558c74d VS: Switch to internal CMAKE_MAKE_PROGRAM lookup by generators
5229f2d Tests: Do not use an explicit make program for VS generators
72dd738 Tests: Fix MFC test heuristic for empty CMAKE_TEST_MAKEPROGRAM
fd6076d Tests: Pass CMAKE_MAKE_PROGRAM instead of --build-makeprogram
68031ab Tests: Configure SubProject-Stage2 test more robustly
003d10c Tests: Simplify VSExcludeFromDefaultBuild configuration
e47d934 Tests: Simplify VSProjectInSubdir configuration
e965cb1 Tests: Simplify CTest.BuildCommand.ProjectInSubdir configuration
72bf255 Tests: Pass --build-options to every test
4d1d772 ctest: Teach --build-options to allow zero options
96966b5 ctest: Make the --build-makeprogram optional for --build-and-test
91a0211 Simplify some calls to cmGlobalGenerator::Build
123a060 Teach GenerateBuildCommand to find its own make program
5f5c92b VS: Add internal APIs to find MSBuild, devenv/VCExpress, and msdev
4ac75fd Prefer CMAKE_MAKE_PROGRAM over CMAKE_BUILD_TOOL (#14548)
...
Teach add_custom_target to check the policy too. Extend the policy to
disallow reserved target names that we use for builtin targets like
"all".
Extend the RunCMake.CMP0037 test to cover these cases.
Pass the CMAKE_TEST_MAKEPROGRAM, if any, to each test at CMake time in
the CMAKE_MAKE_PROGRAM cache entry. Pass the CMAKE_TEST_MAKEPROGRAM
into the ExportImport, Fortran, and MacRuntimePath tests so that they
may do the same for the nested project configurations.
Now "ctest --build-and-test" can get the make program from the test
build tree cache, so drop the explicit --build-makeprogram.
Fix the condition that adds the test to check CMAKE_TEST_GENERATOR
rather than the tools used to build CMake. Drop the test on Ninja
because the generator does not support subproject generation anyway.
Stop using the general build_generator_args and pass the
--build-generator options explicitly. Also pass --build-makeprogram
explicitly when CMAKE_TEST_MAKEPROGRAM is available because there is no
CMakeCache.txt in the test project subdirectory from which to pick up
the make program.
Create a CTEST_TEST_DEVENV variable that is set to the
CMAKE_MAKE_PROGRAM used for Visual Studio 7, 8, and 9. It will always
be either "devenv" or "VCExpress", and not "MSBuild". Add the
VSExcludeFromDefaultBuild test only when this variable is set, and use
its value as the --build-makeprogram value.
More work will be needed later to restore the test on VS 10 and above
when devenv is available, but this is the simplest approach for now.
The test is only enabled on VS 10 and above, where the generators now
select for "ctest --build-and-test" the MSBuild tool by default.
Simplify the test configuration by dropping the --build-makeprogram
option and all the logic needed to compute its value. The test will
automatically use MSBuild.
Historically these were both added for the Makefile and Visual Studio
generators, respectively. Later the VS generators started using the
CMAKE_MAKE_PROGRAM cache entry to find the IDE build tool, and the
CMAKE_BUILD_TOOL was simply set as an alias.
Fix the documentation to explain that CMAKE_MAKE_PROGRAM is the modern
variable and that CMAKE_BUILD_TOOL is the compatibility alias, not the
other way around. Replace uses of CMAKE_BUILD_TOOL with
CMAKE_MAKE_PROGRAM in CMake-provided modules. Nothing needs to lookup
CMAKE_BUILD_TOOL in the cache, so simply set it as a normal variable.
Some extra options are for "ctest --build-and-test" directly, and others
are values for "--build-options". Split these two roles out into two
separate variables and update existing uses.
Use "cmake --build" to drive the "install" target from the CMake build
tree itself. This avoids using the heavier "ctest --build-and-test"
just to run the native build tool to drive installation.
Run the bootstrap script through "cmake -P" instead of
"ctest --build-and-test" so that we do not need to abuse
the --build-makeprogram option of the latter.
Re-implement the build_command() command to use "cmake --build" instead
of generating a native build tool invocation directly. This command
will internally invoke the proper native build tool.
This avoids requiring cmGlobalGenerator::GenerateBuildCommand to produce
a string so that it can be later refactored to produce a vector with no
quoting or escaping. It will also allow us to later teach CMake to
delay the decision about which build tool to invoke until after the
project build system is generated to disk. For example, on Visual
Studio 10 and above the preferred command-line tool is MSBuild, but we
need to fall back to devenv if the .sln has Intel Fortran .vfproj files.
bf755c7 set: Add unit tests for set/unset PARENT_SCOPE
bc280f1 set: Fix handling of empty value with PARENT_SCOPE
20afbd5 set: Handle value-less PARENT_SCOPE explicitly
Since commit 7d47c693 (Drop compatibility with CMake < 2.4, 2013-10-08)
we no longer need to use the configure_file IMMEDIATE option to support
compatibility modes less than 2.0.
Allow ExternalData_URL_TEMPLATES to be empty if a value for
ExternalData_OBJECT_STORES is provided. Assume in this use case that
the object stores will already contain all needed objects. Extend the
Module.ExternalData test to cover this case (all objects in stores).
Extend the RunCMake.ExternalData test to cover the non-failure message
case when stores are provided without URL templates.
3bade75 Help: Parse Copyright.txt instead of using current year
2bbf6bd Copyright.txt: Add test to check year range
3ee67d0 Copyright.txt: Update year range to end in 2013
621ba1f cmake-gui: Parse Copyright.txt instead of duplicating notice
993b685 bootstrap: Parse Copyright.txt instead of duplicating notice
Add a CMake.Copyright test that, when the CMake version number knows the
year (as it does in development versions), checks that Copyright.txt has
been updated with the current version year.
Split the test cases covering spaces and colons into separate units.
Run the space cases everywhere. Disable the colon cases where they
are known to fail. This approach increases platform coverage for the
test and makes the known-failure logic as local as possible.
No Makefile generator on Windows can generate targets with ':'
in their name because the CMakeFiles/<target>.dir directory cannot
be created. Skip this part of the test on all Windows Make tools.
Commit 239b0c6b (Don't add invalid content to static lib
INTERFACE_LINK_LIBRARIES., 2013-10-20) extended a test which
excercised the logic of the LINK_ONLY generator expression.
Commit ef10b87c (CMP0022: Plain target_link_libraries must populate
link interface, 2013-11-02) removed the instance of LINK_ONLY which
was excercised by that test.
Add a new test which excercises the other instance of LINK_ONLY by
setting the CMP0022 policy to NEW and consuming the contents of the
INTERFACE_LINK_LIBRARIES target property.
In commit 18412153 (Refactor cmTarget::GetCompileDefinitions...,
2013-06-06) cmQtAutomoc was refactored to get all compile definitions
from the target instead of separately asking the target and querying the
directory-level COMPILE_DEFINITIONS property value. While the
generation process does integrate directory-level COMPILE_DEFINITIONS
into the target definitions, this did not happen until after Automoc
targets are constructed. Therefore the commit regressed use of
directory-level definitions in Automoc targets.
Factor the definition finalization logic out from the
cmGlobalGenerator::CreateGeneratorTargets method into a new
cmGlobalGenerator::FinalizeTargetCompileDefinitions method and call it
before constructing Automoc targets. This will place the
directory-level definitions into the target in time to use them for the
Automoc targets.
Extend the QtAutomoc test to cover this case.
b51696f CMP0022: Update target_link_libraries plain signature documentation
25b7f87 Merge branch 'policy-CMP0022-fixes' into policy-CMP0022-fixes-for-master
0a561a0 CMP0022: Warn about a given target at most once
23d21b7 Do not export INTERFACE_LINK_LIBRARIES from non-linkable targets
ef10b87 CMP0022: Plain target_link_libraries must populate link interface
0e06788 CMP0022: Add test for target_link_libraries plain signature
c0f4a61 CMP0022: Add unit test for null pointer check and message.
4b0cfa7 Merge branch 'output-CMP0022-entries' into policy-CMP0022-fixes
Resolve conflict in Source/cmTarget.cxx by integrating the changes to
the internal copy constructor from both sides. Also resolve a logical
conflict by dropping the special case for INTERFACE_LIBRARY targets.
Since cmTarget::SetMakefile already forces CMP0022 to NEW for such
targets we need no special handling.
Resolve conflict in Source/cmTargetLinkLibrariesCommand.h by dropping
the documentation change. We will make the same change in the new
location of the same documentation in a separate commit.
Resolve conflicts in
Tests/RunCMake/CMP0022/CMP0022-WARN-empty-old-stderr.txt
Tests/RunCMake/CMP0022/RunCMakeTest.cmake
by taking the side from the 'policy-CMP0022-fixes' branch.
Since cmTarget::ComputeLinkInterface is called separately for each
"head" target that links a target, the warning we produce when
CMP0022 is not set could be repeated. Add explicit logic to allow
the warning to appear at most once. Multiple copies of the warning
for the same target are almost always identical and therefore
redundant. In the rare case that two copies of the warning are
different, the second can appear in a future run after the first
is fixed.
When cmExportFileGenerator::SetImportLinkInterface exports the old
LINK_INTERFACE_LIBRARIES property values it skips doing so for
non-linkable targets because target->GetLinkInterface returns NULL for
such targets.
Since cmExportFileGenerator::PopulateInterfaceLinkLibrariesProperty
looks at the INTERFACE_LINK_LIBRARIES property directly instead of using
the computed link interface, teach it to skip exporting the property if
target->IsLinkable returns false.
Extend the RunCMake.CMP0022 test with a case covering this. Simply
export an executable target that links to a library that is not
exported.
The CMP0022 NEW behavior is that the INTERFACE_LINK_LIBRARIES property
exactly defines the link interface. The plain target_link_libraries
signature says linking is transitive by default, so it should populate
the property.
Teach the target_link_libraries plain signature to populate the
INTERFACE_LINK_LIBRARIES regardless of the CMP0022 setting. Refactor
the cmTarget::ComputeLinkInterface checks that warn when the policy is
not set to compare the new property to either the explicitly set old
link interface properties or the link implementation fallback for all
linkable target types, not just static libraries.
This fixes a regression in 2.8.12.0 that caused target_link_libraries to
not implement transitive linking in the plain signature once the policy
CMP0022 is set to NEW.
Teach cmGlobalGenerator::CheckTargets to include OBJECT_LIBRARY targets
in the check for source file existence.
Extend the RunCMake.ObjectLibrary test to cover this case.
Some compilers, such as Clang on OS X, do not want the -g flag for both
generating assembly code and assembling it. Drop the -g flag from
generation of main.s in the Assembler test.
Teach the cmGeneratorExpressionEvaluator filesystem artifact logic
to reject OBJECT_LIBRARY targets since they have no main artifact.
Without the explicit rejection evaluation falls through to an
internal CMake error message in cmTarget::GetOutputInfo.
Extend the RunCMake.GeneratorExpression test to cover these cases.
b54dbeb Test foreach/function/macro handling of bracket arguments
ccdf7e0 macro: Do not substitute for placeholders in bracket arguments
999abb9 macro: Add extra indentation to placeholder substitution code
Instead of removing the depot name, which causes problems when looking
at the file change list in CDash, make the Update test remove a given
prefix from the files retrieved from Update.xml.
In certain scenarios, it is preferable to keep a 'dirty' install prefix
than to clear it, and to expect that content will not be found there.
Add a CMAKE_FIND_NO_INSTALL_PREFIX variable that can be set to disable
searching the install prefix.
Bracket arguments recorded in command invocations inside foreach,
function, and macro blocks should not have any replacements done when
the arguments are replayed later. Teach the RunCMake.Syntax test to
cover these cases.
Simply print out the lines as normal paragraph text. Teach the
CMakeLib.testRST test to cover this syntax. Update the
cmake-developer.7 manual to document support for the directives.
Add an Escape1 test case covering \-escape cases inside bracket, quoted,
and unquoted arguments. Also cover comments immediately after quoted
and unquoted arguments on lines containing \# escapes.
9c87d9c Add automatic rcc invocation for Qt.
84218e1 Add automatic uic invocation for Qt.
94a0ca6 Record which files are skipped by automoc.
18fb758 Run the main executable created in the autogen tests.
e485ba1 Rename the QtAutomoc tests to QtAutogen.
7ce65c3 Add extra checks for the AUTOMOC target property.
32771fc Update output messages for generic use.
f371ab5 Rename RunAutomoc to RunAutogen.
85b3d6e Extract an SetupAutoMocTarget method.
ca124a1 Rename the AutomocInfo.cmake file to be more generic.
a342c9f Move some makefile definitions up away from moc-specific code.
98632ef Add the AUTOGEN_TARGETS_FOLDER and obsolete AUTOMOC_TARGETS_FOLDER.
63378ba Rename some variables to reflect broader scope.
97f1aa3 Rename method to reflect generic use.
4abb111 Rename local variable to reflect generic use.
03878c9 Move variable set to where it is used.
...
3e04946 Require CMAKE_<LANG>_COMPILER to be found as a full path
6007f7c CMakeDetermineCompilerId: Always use compiler detected from IDE
332771c CMakeDetermine*Compiler: Remove temporary cache entry
All generators now support detection of the full path to the compiler, so
require it to be so. This will allow CMake<LANG>Information.cmake and
other logic to assume the full path to the compiler tool is available.
The Makefile generators already rejected CMAKE_<LANG>_COMPILER values
that did not name an existing compiler. Extend this error message to
all generators, make it occur as early as possible, and improve the
message with advice about how to set the compiler. If the full path to
the compiler is not known, finish enabling languages with a fatal error
so configuration does not continue.
For now, allow the RC language compiler to not be a full path. Later we
will need to detect the full path to "rc" under the VS IDE.
Add a RunCMake.CompilerNotFound test to cover failure cases.
Fix the RunCMake.CompilerChange test EmptyCompiler case to work
when configuration does not continue past enable_language.
ff59365 CTest: fix dashboard issues associated with the ctest-fix-run-serial topic
7a665ae CTest: added test for RUN_SERIAL issue #14484384beff CTest: added comments that describe the basic test sorting approach
adbe00d CTest: removed redundant copy of test dependency set
1b750cb CTest: perform cycle test early
6d4d7ca CTest: consider previously failed tests before all others
e809d8c CTest: prioritize tests by their depth in the dependency graph
44017a4 CTest: handle dependent and non dependent test requirements equally
ff6c401 cmTarget: Add interface for compatible numeric properties
e4e20c1 cmTarget: Add enumeration for consistency to expect from properties.
9877769 cmTarget: Assign consistent content back to the property being evaluated.
816b4a8 cmTarget: Make consistentProperty return consistent content.
030800a cmTarget: Add a template to create correct implied content.
Teach the ctest_update implementation to use the p4 command-line
client to perform updates and extract the list of changes.
Add a CTest.UpdateP4 test like those that exist already for the other
version control tools. Make the test available when p4 and the p4d
server are found. During the test launch p4d in the background to
serve a repository from the test directory. Then direct the client
toward this server for the duration of the test.
Only valid target names or generator expressions may appear in
the target field of a LINK_ONLY expression.
Other content like link flags should still be added to that property
(wrapped in config-specific generator expressions), but not wrapped
in LINK_ONLY. Otherwise undue warnings would be issued for the
policy CMP0022.
The LINK_ONLY expression only has an effect for actual target
names anyway, so there is no logical deficit.
Set the minimum required version of CMake high enough to avoid the
warning for CMAKE_LEGACY_CYGWIN_WIN32. The warning appears on stderr
and breaks the expected output matching.
It was a subtest of the RunCMake.ObjectLibrary test. However, we need
to test a build with ExternalProject after running CMake, which RunCMake tests
do not do.
The source files are already processed by cmQtAutomoc to look for
moc includes, so extend that to also look for ui_ includes and
find corresponding .ui files to process.
This replaces the need to invoke qt4_wrap_ui().
As the ui files are not likely to be part of the SOURCES of the
target, store the options associated with them separately in the
cmMakefile for querying during the autogen run.
Don't try to show the windows, which would require a gui capable test
machine, and that's not guaranteed.
Automatically link to qtmain.a on Windows to avoid a policy warning. Set
policy CMP0020 to NEW by increasing the required version.
Don't attempt to run the test when using Windows.
When using the boost MPL library, one can set a define to increase
the limit of how many variadic elements should be supported. The
default for BOOST_MPL_LIMIT_VECTOR_SIZE is 20:
http://www.boost.org/doc/libs/1_36_0/libs/mpl/doc/refmanual/limit-vector-size.html
If the foo library requires that to be set to 30, and the independent
bar library requires it to be set to 40, consumers of both need to set
it to 40.
add_library(foo INTERFACE)
set_property(TARGET foo PROPERTY INTERFACE_boost_mpl_vector_size 30)
set_property(TARGET foo PROPERTY COMPATIBLE_INTERFACE_NUMBER_MAX boost_mpl_vector_size)
target_compile_definitions(foo INTERFACE BOOST_MPL_LIMIT_VECTOR_SIZE=$<TARGET_PROPERTY:boost_mpl_vector_size>)
add_library(bar INTERFACE)
set_property(TARGET bar PROPERTY INTERFACE_boost_mpl_vector_size 40)
# Technically the next two lines are redundant, but as foo and bar are
# independent, they both set these interfaces.
set_property(TARGET bar PROPERTY COMPATIBLE_INTERFACE_NUMBER_MAX boost_mpl_vector_size)
target_compile_definitions(bar INTERFACE BOOST_MPL_LIMIT_VECTOR_SIZE=$<TARGET_PROPERTY:boost_mpl_vector_size>)
add_executable(user)
target_link_libraries(user foo bar)
Because the TARGET_PROPERTY reads the boost_mpl_vector_size property
from the HEAD of the dependency graph (the user target), and because
that property appears in the COMPATIBLE_INTERFACE_NUMBER_MAX of
the dependencies of the user target, the maximum value for it is
chosen for the compile definition, ie, 40.
There are also use-cases for choosing the minimum value of a number.
In Qt, deprecated API can be disabled by version. Setting the
definition QT_DISABLE_DEPRECATED_BEFORE=0 disables no deprecated
API. Setting it to 0x501000 disables API which was deprecated before
Qt 5.1 etc.
If two dependencies require the use of API which was deprecated in
different Qt versions, then COMPATIBLE_INTERFACE_NUMBER_MIN can be
used to ensure that both can compile.
When scanning CMake module files for .rst comments, recognize
bracket comments starting in ".rst:" too. For example:
#[[.rst:
Include the bracket comment content terminated by the closing bracket.
Exclude the line containing the bracket if it starts in "#".
Teach the CMakeLib.testRST test to cover multiple bracket lengths
and ending brackets on lines with and without "#".
Update the cmake-developer.7 manual to document the bracket-comment
syntax for .rst documentation.
Teach the CMake language lexer to treat the \-LF pair terminating a
line ending in an odd number of backslashes inside a quoted argument
as a continuation. Drop the pair from the returned quoted argument
token text. This will allow long lines inside quoted argument
strings to be divided across multiple lines in the source file.
It will also allow quoted argument text to start on the line after
the opening quote. For example, the code:
set(x "\
...")
sets variable "x" to the value "..." with no opening newline.
Previously an odd number of backslashes at the end of a line inside
a quoted argument would put a \-LF pair (or a \-CR pair) literally
in the argument. Then the command-argument evaluator would complain
that the \-escape sequence is invalid. Therefore this syntax is
available to use without changing behavior of valid existing code.
Teach the RunCMake.Syntax test to cover cases of quoted arguments
with lines ending in \, \\, and \\\. Odd counts are continuations.
Drop all behavior activated by setting CMAKE_BACKWARDS_COMPATIBILITY to
a value lower than 2.4, and generate an error when projects or the user
attempt to do so. In the error suggest using a CMake 2.8.x release.
Teach cmake_minimum_required to warn about projects that do not require
at least CMake 2.4. They are not supported by CMake >= 3.0.
Replace the documentation of CMAKE_BACKWARDS_COMPATIBILITY with a
reference to policy CMP0001.
Other warnings for the same policy already have similar output since
commit 81d2793e (Add differing target property content to policy CMP0022
warning, 2013-09-11).
Add cmCommand::Disallowed helper to check the setting of a policy that
disallows the command. Add a RunCMake.DisallowedCommands test
placeholder. Add a Help/policy/DISALLOWED_COMMAND.txt file for
inclusion by each policy document to avoid duplication of the common
text.
Teach cmRST to recognize non-markup lines ending in '::' followed by a
blank line as starting a literal block. Record the whole block as if it
were a literal block directive and print it just like a code block.
Extend the CMakeLib.testRST test to cover such cases.
Move the ProcessDirectiveParsedLiteral and ProcessDirectiveCodeBlock
method internals into an OutputMarkupLines helper. Pass through it a
new "inlineMarkup" parameter and teach OutputLine to understand it.
When false, do not process inline markup. Extend the CMakeLib.testRST
test to cover the two cases.
Add a string(CONCAT) command to simply concatenate input arguments
together. This will be useful for combining strings from different
quoting syntaxes. Add a RunCMake.string test covering these cases.
Introduce a policy to control the behavior.
The AliasTargets unit test already tests that using a
double-semicolon in the name is not an error. Change the ExportImport
test to use a namespace with a double-semicolon too.
The result is that the depends of the target are created.
So,
add_library(somelib foo.cpp)
add_library(anotherlib EXCLUDE_FROM_ALL foo.cpp)
add_library(extra EXCLUDE_FROM_ALL foo.cpp)
target_link_libraries(anotherlib extra)
add_library(iface INTERFACE)
target_link_libraries(iface INTERFACE anotherlib)
Executing 'make iface' will result in the anotherlib and extra targets
being made.
Adding a regular executable to the INTERFACE of an INTERFACE_LIBRARY
will not result in the executable being built with 'make iface' because
of the logic in cmComputeTargetDepends::AddTargetDepend.
So far, this is implemented only for the Makefile generator. Other
generators will follow if this feature is possible for them.
Make INTERFACE_LIBRARY targets part of the all target by default.
Test this by building the all target and making the expected library
EXCLUDE_FROM_ALL.
daa0f6f Add Lua-style long brackets and long comments to CMake language
a8c6523 cmListFileLexer: Convert CRLF -> LF newlines explicitly
dbd9333 cmListFileLexer: Allow a leading UTF-8 Byte-Order-Mark (#11137)
5645783 cmListFileLexer: Allow command names with one letter (#14181)
Set the minimum required version of CMake high enough to avoid the
warning for CMAKE_LEGACY_CYGWIN_WIN32. The warning appears on stderr
and breaks the expected output matching.
This has not been allowed since they were introduced in
commit 91438222 (target_link_libraries: Add LINK_(PUBLIC|PRIVATE)
options, 2011-10-07), but allowing this form makes it more compatible
with the newer PUBLIC and PRIVATE keywords.
Teach the CMake language parser to recognize Lua-style "long bracket"
arguments. These start with two '[' separated by zero or more '='
characters e.g. "[[" or "[=[" or "[==[". They end with two ']'
separated by the same number of '=' as the opening bracket. There is no
nesting of brackets of the same level (number of '='). No escapes,
variable expansion, or other processing is performed on the content
between such brackets so they always represent exactly one argument.
Also teach CMake to parse and ignore "long comment" syntax. A long
comment starts with "#" immediately followed by an opening long bracket.
It ends at the matching close long bracket.
Teach the RunCMake.Syntax test to cover long bracket and long comment
cases.
Read input files in binary mode instead of text mode and convert CRLF
newlines to LF newlines explicitly in our own buffer. This is necessary
to read CMake source files with CRLF newlines on platforms whose C
runtime libraries do not transform newlines in text mode. For example,
a Cygwin or Linux binary may not transform CRLF -> LF in files read from
a Windows filesystem. Perform the conversion ourselves to ensure that
multi-line string literals in CMake source files have LF newlines
everywhere.
Teach the lexer to read a UTF-8, UTF-16 BE/LE, or UTF-32 BE/LE
Byte-Order-Mark from the start of a file if any is present. Report an
error on files using UTF-16 or UTF-32 and accept a UTF-8 or missing BOM.
Teach the lexer to treat a single letter as an identifier instead of an
unquoted argument. Outside of a command invocation, the parser treats
an identifier as a command name and an unquoted argument as an error.
Inside of a command invocation, the parser treats an identifier as an
unquoted argument. Therefore this change to the lexer will make what
was previously an error case work with no other behavioral change.
Create a cmRST class to perform just enough reStructuredText processing
to support display of Help documents in human-readable text format.
This will be used to implement --help-* command-line options.
Support directives "include", "replace", "parsed-literal", "toctree"
(Sphinx), and "cmake-module" (CMake Sphinx Extension to scan .cmake
modules). Support inline CMake Sphinx Domain roles to convert
cross-references to corresponding title text. Support inline
substitutions defined by the "replace" directive, but keep it simple by
requiring replacements to be defined before use.
Add a CMakeLib "testRST" case to cover processing of supported
constructs and compare results against expected output.
With our modern development workflow it is less likely a property will
be added to C++ code without documentation. This mode only existed to
support the DocTest which had very limited coverage of the properties
anyway.
a4263c9 export(): Handle multiple dependent export sets.
66b290e export(): Process the export() command at generate time.
5fe5c32 export(): Set a Makefile on the cmExportBuildFileGenerator.
e383555 cmExportInstallFileGenerator: Fix comment to match reality.
This allows the use of the $<TARGET_FILE:...> generator expression as a
replacement for the use of the LOCATION target property. The use of the
LOCATION target property is now deprecated for in-build targets.
Also drop other checks for older CMake versions:
* Simplify cmake_set_target_folder macro.
* Use find_package(LibArchive) unconditionally.
* Simplify condition for running testVisualStudioSlnParser test.
* Convert two macros to functions.
* Unconditionally run the CTestTestRerunFailed test.
The final location and name of a build-target is not determined
until generate-time. However, reading the LOCATION property from
a target is currently allowed at configure time. Apart from creating
possibly-erroneous results, this has an impact on the implementation
of cmake itself, and prevents some major cleanups from being made.
Disallow reading LOCATION from build-targets with a policy. Port some
existing uses of it in CMake itself to use the TARGET_FILE generator
expression.
Make the API for adding targets string based so that it can easily
use cmGeneratorTarget.
Teach the cmIncludeCommand to generate the exported file at
configure-time instead if it is to be include()d.
The RunCMake.ExportWithoutLanguage test now needs a dummy header.h
file as expected error from export() is now reported after the
missing file error.
f973737 GenerateExportHeader: Port to use message(DEPRECATION)
f69606d Qt4Macros: Port to use message(DEPRECATION)
509c142 message: Add a DEPRECATION mode
7efef02 FindGTK2: Add tests for components and targets in gtk and gtkmm modules
95fc47a FindGTK2: Make pangocairo and cairo optional dependencies
26f790f FindGTK2: Change extra includes -> optional
24e0272 FindGTK2: do not skip target creation if optional dependencies are not found
d5f130c FindGTK2: Refactor _GTK2_ADJUST_LIB_VARS into _GTK2_ADD_TARGET
fffbd72 FindGTK2: Do not add freetype includes if they are not found
b69720d FindGTK2: Add libraries to the GTK2_LIBRARIES variable only when found
425ec40 FindGTK2: Do not link libfreetype
e9f46df FindGTK2: Add config directories only if different from include ones
56a79e1 FindGTK2: Set INTERFACE_COMPILE_DEFINITIONS target property only if not empty
4b47586 FindGTK2: Add check to ensure that target exists
61242cc FindGTK2: Fix gmodule, glibmm, pangoft2, and pangoxft targets
4b876de FindGTK2: Link freetype libs to targets including freetype includes
67e761f FindGTK2: Small cleanup
682eea3 FindGTK2: Do not require the GTK_ prefix in all the internal functions
0bc3763 FindGTK2: Better handling of include directories
...
54ef2be Haiku: Include files cleanup in cmCTest
38d5555 Haiku: Remove outdated preprocessor checks
1dc61f8 Haiku: Remove use of B_COMMON_DIRECTORY
7ebc1cb Haiku: Several fixes to platform module
1763c31 Set policy CMP0025 to NEW while building CMake itself
aa53ee5 Add policy CMP0025 for Apple Clang compiler id compatibility
ab65862 Clang: Add separate "AppleClang" compiler id
Drop the HELP_XCODE workarounds needed on older Xcode versions when
using Xcode >= 5. We now expect builds and rebuilds to work using
proper dependencies with no special help.
By default, the message is not issued. If CMAKE_ERROR_DEPRECATED
is on, the message is fatal. If CMAKE_WARN_DEPRECATED is on, the
message is a warning.
* Do not define BEOS anymore (this includes workarounds which we don't
need most of the time in Haiku, so we prefer opt-in IF(HAIKU) in the
cmake files instead).
* On the other hand, do define UNIX (we are trying to be compliant) and
HAIKU (there is still a number of things we don't do like the
average UNIX clone)
* Do not use UnixPaths, as our filesystem hierarchy isn't anything like
what it expects.
* Do not use -nostart, which the compiler doesn't know about anymore.
This used to be an Haiku extension to gcc, and is equivalent to
-shared which is the default gcc option.
* While "dl" functions are provided in libroot, this is always
implicitly linked so there is no need to tell cmake about it.
* Forcing position-independent code is not needed, so remove it.
* On the other hand, include appropriate linker options for executables
and shared libraries.
* Support for the two available compilers in Haiku (gcc2 and gcc4) and
pick the right headers and libraries according to the currently
selected one.
* With the adoption of the package manager, the directory layout was
changed. Tell cmake where to look for header files and libraries.
* As we don't define BEOS anymore, enable the workaround we still need
for HAIKU as well. This is the lack of a libm (it is part of the
implicitly linked in libroot)
Applied-by: Rolf Eike Beer <eike@sf-mail.de>
Previously if headers required to check if a struct has a member can be
compiled with C++ compiler only, the check would fail because the C
compiler fails. As a consequence, the result variable would be set to
false, even if the struct has that particular member.
Teach CHECK_STRUCT_HAS_MEMBER to accept a new optional argument LANGUAGE
that allows one to explicitly set the compiler to use. The new
signature is therefore:
CHECK_STRUCT_HAS_MEMBER (<struct> <member> <header> <variable>
[LANGUAGE <language>])
This assumes that coverage.py has been run in such a way to produce its
standard XML output. This uses the Cobertura schema and should be somewhat
generalizable.
Add a new command line argument to ctest. This allows users to
rerun tests that failed during the previous call to ctest. This
is accomplished by analyzing the most recently modified file named
"^LastTestsFailed*" in the Testing/Temporary subdirectory of the
project's binary directory.
Add an unset() command option to remove a variable from the calling
scope, just like the set() command's PARENT_SCOPE option. Teach the
Unset test to cover such cases.
CMake is aware of the policy's NEW behavior and the AppleClang compiler
id. Set the policy to NEW explicitly to avoid the warning and get the
NEW behavior.
Also teach the RunCMake test infrastructure to build tests with
-DCMAKE_POLICY_DEFAULT_CMP0025=NEW to avoid the policy warning
in test output that must match specific regular expressions.
Apple distributes their own Clang build with their own version numbers
that differ from upstream Clang. Use the __apple_build_version__ symbol
to identify the Apple Clang compiler and report the Apple Build Version
as the fourth version component in CMAKE_<LANG>_COMPILER_VERSION. Add
Compiler/AppleClang-<lang> and Platform/Darwin-AppleClang-<lang> modules
that simply include the upstream equivalents.
Fix comparisons of CMAKE_<LANG>_COMPILER_ID to Clang in CMake's own
source and tests to account for AppleClang.
Currently, export() is executed at configure-time.
One problem with this is that certain exported properties like
the link interface may not be complete at the point the export() is
encountered leading to an incorrect or incomplete exported
representation. Additionally, the generated IMPORTED_LOCATION
property may even be incorrect if commands following the export()
have an effect on it.
Another problem is that it requires the C++ implementation of cmake
to be capable of computing the exported information at configure time.
This is a limitation on the cleanup and maintenance of the code. At
some point in the future, this limitation will be dropped and more
implementation will be moved from cmTarget to cmGeneratorTarget.
This target type only contains INTERFACE_* properties, so it can be
used as a structural node. The target-specific commands enforce
that they may only be used with the INTERFACE keyword when used
with INTERFACE_LIBRARY targets. The old-style target properties
matching LINK_INTERFACE_LIBRARIES_<CONFIG> are always ignored for
this target type.
The name of the INTERFACE_LIBRARY must match a validity generator
expression. The validity is similar to that of an ALIAS target,
but with the additional restriction that it may not contain
double colons. Double colons will carry the meaning of IMPORTED
or ALIAS targets in CMake 2.8.13.
An ALIAS target may be created for an INTERFACE library.
At this point it can not be exported and does not appear in the
buildsystem and project files are not created for them. That may
be added as a feature in a later commit.
The generators need some changes to handle the INTERFACE_LIBRARY
targets returned by cmComputeLinkInterface::GetItems. The Ninja
generator does not use that API, so it doesn't require changes
related to that.
6a47c37 add_test: Mention generator expressions in old-style add_test docs
d331292 cmTestGenerator: Evaluate generator expressions in test properties
6fe5c4a cmTestGenerator: Separate test properties for each configuration
Re-insert the semicolon which was removed during splitting.
Commit d777b8e7 (Genex: Allow relative paths in INSTALL_INTERFACE.,
2013-07-25) introduced the prefixItems method to allow relative paths
in the argument of the INSTALL_INTERFACE expression. That method was
buggy in that it did not re-introduce the semicolon separator in
the result.
This bug also affects paths which are already absolute in user code.
The lack of Qt4 on a system should silently skip the corresponding tests
with no other messages. This is already the case for other find_package
calls in Tests/CMakeLists.txt.
Xcode 5.0 now relinks targets when their shared libraries dependencies
are modified, and there seems to be no way to stop it. Report this as a
known limitation in the test output and do not fail.
In Tests/Architecture and Tests/BuildDepends/Project we select a set of
OS X cpu architectures to use for the test. Prior to Xcode 4 we always
used i386 and ppc. Starting with Xcode 4, the tools do not support ppc
but do support x86_64, so we switch to that. Fix the version check to
recognize Xcode >= 5 as at least Xcode 4 and use the new architectures.
This is useful for cases like:
add_test(NAME mytest COMMAND mydriver $<TARGET_FILE:myexe>)
set_tests_properties(mytest PROPERTIES
REQUIRED_FILES "$<TARGET_FILE:myexe>"
WORKING_DIRECTORY "${CMAKE_CURRENT_BINARY_DIR}/$<CONFIGURATION>"
)
In this example we require the actual test executable to exist to
run the test in addition to the test driver at argv[0]. Also the
$<CONFIGURATION> expression improves over \${CTEST_CONFIGURATION_TYPE}
because the latter is not normalized for case-sensitive filesystems.
When RunCMake tests run during dynamic analysis, valgrind may add lines
of the form "==[0-9]+==..." to the output. Remove such lines from the
actual output before matching it against the expected output.
In commit 10bc50ea (Tests: ignore Guard Malloc messages in MemChecker
tests, 2013-05-13) we forgot to escape backslashes in the CMake language
to get them into the regex. Add them now.
Add the CMake.PolicyCheck test.
This test uses "git grep" to look for policies added in a "dated"
version of CMake. It will fail if a policy is added as of,
for example, CMake 2.8.11.20130828.
The intent is to prevent such constructs from making it into an
"official" release. Three instances actually appeared in the first
attempted release candidate for 2.8.12.
This test may sometimes yield false positives. After all, it's just
using a regular expression to detect this condition, and something
in a comment could possibly match it. As of right now, that's not
true, but it's easy to imagine such a comment being added.
The new test may also not catch all future problems of this sort.
However, it will catch problems of this sort for all code that follows
the present layout style in Source/cmPolicies.cxx.
The old version encountered a compile error on newer versions of GCC.
Update to the latest supported release of Trilinos, remove the version
number from the name of the Contract, and some other minor tweaks to
get the test passing once more.
This is necessary because custom commands and targets may create
custom files whose names are determined by generator expressions.
For example, clang should be using $<TARGET_FILE> and $<TARGET_FILE_DIR>
instead of reverse engineering the output file name:
http://thread.gmane.org/gmane.comp.compilers.clang.scm/80523
However, that can only be done when ADDITIONAL_MAKE_CLEAN_FILES
also accepts and evaluates generator expressions.
Similarly, KDE uses the LOCATION property where $<TARGET_FILE>
would also be better in KDE4_HANDLE_RPATH_FOR_EXECUTABLE but
also appends the result to ADDITIONAL_MAKE_CLEAN_FILES.
After this patch, both can be ported to generator expressions.
Exclude Ninja and Xcode from the CMP0021 test
They do not behave the same as the makefile generator with
relative paths.
Don't overwrite the header file for in-source builds.
Refactor generation of PASS_REGULAR_EXPRESSION for tests
CTestTestMemcheckDummyPurify
CTestTestMemcheckDummyValgrind
CTestTestMemcheckDummyValgrindPrePost
CTestTestMemcheckDummyValgrindIgnoreMemcheck
Avoid duplicating the normal ctest output matching expression. Use
literal newlines instead of "\n" to improve readability. Integrate
matching of guard-malloc lines at the end of the output with expressions
matching tool output like lines for BullseyeCoverage.
Since commit 58e52416 (Warn about arguments not separated by whitespace,
2013-02-16) we warn about arguments not separated by spaces. Loosen the
warning to not complain about left parens not separated by spaces from
the preceding token. This is common in code like "if(NOT(X))".
Teach the RunCMake.Syntax test to cover cases of left parens not
separated by spaces and check that no warning appears.
Set the minimum required version of CMake high enough to avoid the
warning for CMAKE_LEGACY_CYGWIN_WIN32. The warning appears on stderr
and breaks the expected output matching.
The extendResult method expects a non-empty parameters vector, as
assured by the normal case. Avoid calling the method when the parser
finds an incomplete generator expression, but has already entered
the state of expecting to find parameters.
b93982f Merge branch 'dev/fix-variable-watch-crash' into cmake-syntax
c50f7ed cmListFileLexer: Modify flex output to avoid Borland warning
bf73264 Warn about unquoted arguments that look like long brackets
58e5241 Warn about arguments not separated by whitespace
e75b69f cmListFileCache: Convert CMake language parser to class
e945949 Add RunCMake.Syntax test cases for command invocation styles
0546484 cmListFileArgument: Generalize 'Quoted' bool to 'Delimeter' enum
28685ad cmListFileLexer: Split normal and legacy unquoted arguments
1eafa3e cmListFileLexer: Fix line number after backslash in string
f3155cd Add RunCMake.Syntax test to cover argument parsing
6aa0c21 variable_watch: Add test for watching a variable multiple times
b86e37c variable_watch: Check newValue for NULL
f9bb20f variable_watch: Don't share memory for callbacks
05dad99 variable_watch: Fix a typo in the error message
00ce12a variable_watch: Prevent making extra entries in the watch map
34b397e variable_watch: Allow specifying the data to match in RemoveWatch
e43e207 variable_watch: Match client_data when finding duplicates
0d6acb1 variable_watch: Add a deleter for the client data
fc7c3b4 variable_watch: Store client data as pointers
In the future CMake will introduce Lua-style long bracket syntax.
Warn about unquoted arguments that in the future will be treated
as opening long brackets.
Teach the RunCMake.Syntax test to cover such cases and ensure that the
warning appears.
Teach the lexer to return tokens for whitespace. Teach the parser to
tolerate the space tokens where whitespace is allowed. Also teach the
parser to diagnose and warn about cases of quoted arguments followed
immediately by another argument. This was accidentally allowed
previously, so we only warn.
Update the RunCMake.Syntax test case StringNoSpace expected stderr to
include the warnings.
If a line inside a string ends in a backslash count the following
newline character as a line increment. Add a test covering this case to
verify that subsequent line numbers are correct.
Test basic unquoted and quoted argument parsing cases including failure
on an unterminated string and an unterminated command invocation. Also
cover arguments not separated by any spaces, which is accidentally
allowed by the current parser.
The output file used for memory checker runs must be unique for every test run
in parallel, so simply make them unique for every test run. Simply use the test
index to avoid collisions.
The Borland-built CTest binary has trouble running many instances of
itself in parallel, making the test unreliable. No particular recent
change appears to be the culprit and the failure is not reliably
reproducible. Just silence the failure for now by skipping the test.
* The ALIAS name must match a validity regex.
* Executables and libraries may be aliased.
* An ALIAS acts immutable. It can not be used as the lhs
of target_link_libraries or other commands.
* An ALIAS can be used with add_custom_command, add_custom_target,
and add_test in the same way regular targets can.
* The target of an ALIAS can be retrieved with the ALIASED_TARGET
target property.
* An ALIAS does not appear in the generated buildsystem. It
is kept separate from cmMakefile::Targets for that reason.
* A target may have multiple aliases.
* An ALIAS target may not itself have an alias.
* An IMPORTED target may not have an alias.
* An ALIAS may not be exported or imported.
33e6e0b VS6: Add handling of CMAKE_*_LINKER_FLAGS_<CONFIG> variables
152dfda Add additonal tests for the linker flags
20ed496 Add documentation for the missing CMAKE_*_LINKER_FLAGS_* variables
54f7019 Add CMAKE_STATIC_LINKER_FLAGS to CMakeCommonLanguageInclude
2a43c30 Add support for CMAKE_STATIC_LINKER_FLAGS
14bbf83 Unify the way the flags of a static library are read
The VS 6 IDE does not want to recompile a particular source after
a particular header it includes is modified, even by hand. For
now just silence the failure and document it with a comment.
The new feature of install(TARGETS ... INCLUDES DESTINATION) introduced
in commit 650e61f8 (Add a convenient way to add the includes install
dir to the INTERFACE., 2013-01-05) introduced this crash. If the
new feature is used with a target which has no
INTERFACE_INCLUDE_DIRECTORIES, a segfault occurred.
Commit 650e61f8 (Add a convenient way to add the includes install
dir to the INTERFACE., 2013-01-05) introduced an error case for
using the install(TARGETS) command with specified INCLUDES DESTINATION,
but no specified EXPORT set.
It is convenient to use a variable to set the various destinations
for different outputs (as KDE does), and some targets such as
executables are installed but not exported. This was triggering
the error case, but as it is a common case, remove the error.
This reverts commit 6187876dea.
It was actually possible before to have paths with spaces in them, the spaces
just need to be quoted. This way spaces will work as argument separators.
First, it prevents a NULL dereference and second it reiterates that
targets without languages are not supported by CMake.
Add a RunCMake.ExportWithoutLanguage test exporting a library without a
languages.
Teach the Preprocess test to get, set, and then get the same value for
the COMPILE_DEFINITIONS target property and verify that the value is not
changed. This ensures the internal structured storage of the property
value can reproduce the original string value.
Add a new signature to help populate INTERFACE_LINK_LIBRARIES and
LINK_LIBRARIES cleanly in a single call. Add policy CMP0023 to control
whether the keyword signatures can be mixed with uses of the plain
signatures on the same target.
Export the INCLUDES DESTINATION without appending to the
INTERFACE_INCLUDE_DIRECTORIES of the target itself. That way, a target
can be exported multiple times with different INCLUDES DESTINATION
without unintended cross-pollution of export sets.
It accepted an optional argument to test for equality, but no way
to get the linker language of a particular target.
TARGET_PROPERTY provides this flexibility and STREQUAL provides
the necessary API for equality test.
Extend the CompileDefinitions test to cover accessing the
property of another target.
bf23891 CPackWIX: Add support for custom WiX templates
155bb01 CMakeCPack: Provide an upgrade guid for WiX
bfa2e29 CPackWIX: Add option to specify the language(s) of the installer
6e51ea9 CPackWIX: Handle multiple shortcuts in the start menu
6d77e1a CPackWIX: Fix MSI package layout regression from parent
8c0e325 CPackWIX: Handle CPACK_PACKAGE_EXECUTABLES (#13967)
If one of the libraries (_DEBUG or _RELEASE) is not set, the value is
set to the value of the other one. FindQt4, from which the macro is
extracted, sets the values to XXX_LIBRARY_{DEBUG,RELEASE}-NOTFOUND
instead. In both cases the XXX_LIBRARY is correct, but using NOTFOUND
makes it easier to understand which one is missing.
Update Tests/CMakeOnly/SelectLibraryConfigurations with the new logic.
In CMakeDetermineCompilerABI we use try_compile with the COPY_FILE
option to get a copy of the compiled binary used to detect the ABI
information. We already tolerate the case when compilation fails.
However, when compilation appears to succeed but does not produce the
expected executable the try_compile command immediately reports an error
because the COPY_FILE fails.
Tolerate COPY_FILE failure without stopping the overall configuration
process by using the try_compile COPY_FILE_ERROR option to capture the
error message. Log the full error to CMakeError.log and simply report
failure to detect the ABI as if compilation had failed.
Teach the RunCMake.Configure test to cover this case and verify that the
messages show up as expected both in stdout and in CMakeError.log.
The test uses generate_export_header(cmp0022OLD ...) to generate the
cmp0022_export.h header used by both cmp0022OLD and cmp0022NEW. In
the latter the _EXPORTS symbol does not match what the header expects
so the library does not export anything. The Watcom linker does not
like to create shared libraries that do not export any symbols.
Fix this by setting the DEFINE_SYMBOL property on cmp0022NEW to match
that of cmp0022OLD as the header expects.
9cf3547 Add the INTERFACE_SYSTEM_INCLUDE_DIRECTORIES target property.
1925cff Add a SYSTEM parameter to target_include_directories (#14180)
286f227 Extend the cmTargetPropCommandBase interface property handling.
83498d4 Store system include directories in the cmTarget.
f1fcbe3 Add Target API to determine if an include is a system include.
2679a34 Remove unused variable.
Unlike other target properties, this does not have a corresponding
non-INTERFACE variant.
This allows propagation of system attribute on include directories
from link dependents.
3e30d9e TLL: Don't populate old link interface if CMP0022 is NEW.
574fec9 Export: Generate INTERFACE_LINK_LIBRARIES property on targets.
d0a76ea Introduce the INTERFACE_LINK_LIBRARIES property.
ddde61c Introduce the LINK_ONLY generator expression.
5aa9731 GenexEval: Add abstracted access to link interface for a target.
When the COPY_FILE operation fails optionally capture the error message
with a COPY_FILE_ERROR option instead of reporting the error
immediately. This gives callers a chance to do something else or report
the error.
Teach the RunCMake.try_compile test to cover bad argument combinations
involving COPY_FILE_ERROR. Teach the TryCompile test to cover the case
of a COPY_FILE error message captured by COPY_FILE_ERROR.
If CMAKE_<lang>_FLAGS contains quotes or other CMake language characters
they must be escaped when written into the generated CMakeLists.txt file
so that the test project parses them properly.
Teach the TryCompile test to cover this case by adding a flag with
quotes into CMAKE_C_FLAGS during a C language try_compile.
Use preprocessor loops and add a unit test for the appropriate
policies. All policies whose value is recorded at target creation
time should be part of this list.
When CMake reports failure to configure a project, especially when the
toolchain does not initialize properly, the true reason may be clear
from reading the CMakeFiles/CMake(Output|Error).log files. Advise users
to look at these files if they exist when configuration fails.
Add RunCMake.Configure test to check that the log files are mentioned
when configuration fails.
Always populate the INTERFACE_LINK_LIBRARIES for interface
entries. Don't populate the old interface properties
matching (IMPORTED_)?LINK_INTERFACE_LIBRARIES(_<CONFIG>)?
if CMP0022 is NEW.
Because the INTERFACE_LINK_LIBRARIES property is now populated by
the target_link_libraries when operating on a static library,
make an equivalent change which populates the property with
the same value when the old link_libraries() command is used. This
silences the policy warning in that case.
This property is generated only for targets which have recorded
policy CMP0022 as NEW, and a compatibility mode is added to
additionally export the old interfaces in that case too.
If the old interfaces are not exported, the generated export files
require CMake 2.8.12. Because the unit tests use a version which
is not yet called 2.8.12, temporarily require a lower version.
This property replaces the properties which
match (IMPORTED_)?LINK_INTERFACE_LIBRARIES(_<CONFIG>)?, and is enabled
for IMPORTED targets, and for non-IMPORTED targets only with a policy.
For static libraries, the INTERFACE_LINK_LIBRARIES property is
also used as the source of transitive usage requirements content.
Static libraries still require users to link to all entries in
their LINK_LIBRARIES, but usage requirements such as INCLUDE_DIRECTORIES
COMPILE_DEFINITIONS and COMPILE_OPTIONS can be restricted to only
certain interface libraries.
Because the INTERFACE_LINK_LIBRARIES property is populated unconditionally,
we need to compare the evaluated result of it with the link implementation
to determine whether to issue the policy warning for static libraries. For
shared libraries, the policy warning is issued if the contents of
the INTERFACE_LINK_LIBRARIES property differs from the contents of the
relevant config-specific old LINK_INTERFACE_LIBRARIES property.
If a non-IMPORTED library is added to the INTERFACE_LINK_LIBRARIES
of a IMPORTED target, the non-IMPORTED target needs to become a
target dependency and link dependency of the consuming target.
This is already the case since commit 30962029 (Make targets depend
on the link interface of their dependees, 2012-12-26), and fixed in
the parent commit, so test that it works.
9a76d83 VS12: Find proper MSBuild for VSProjectInSubdir test
4e5cb39 Merge branch 'master' into vs12-generator
78fdbbc FindBoost: Add -vc120 mangling for VS 12
e99d7b1 VS12: Generate flag tables from MSBuild v120 tool files
77ac9b8 VS12: Add Visual Studio 12 generator (#14251)
539356f Ninja: Custom Command file depends don't need to exist before building
874e171 Ninja: GlobalNinjaGenerator WriteBuild and WritePhonyBuild non static
88d27ad Add a test to expose a bug with add_custom_command and ninja.
If the CTest make program is not msbuild we find the msbuild
corresponding to the current test generator. In the case of
VS 12 search for the msbuild it provides.
Copy cmGlobalVisualStudio11Generator to cmGlobalVisualStudio12Generator
and update version numbers accordingly. Add the VS12 enumeration value.
Add module CMakeVS12FindMake to find MSBuild. Look for MSBuild in its
now-dedicated Windows Registry entry. Teach the platform module
Windows-MSVC to set MSVC12 and document the variable. Teach module
InstallRequiredSystemLibraries to look for the VS 12 runtime libraries.
Teach tests CheckCompilerRelatedVariables, Preprocess, VSExternalInclude,
and RunCMake.GeneratorToolset to treat VS 12 as they do VS 10 and 11.
Inspired-by: Minmin Gong <minmin.gong@gmail.com>
In my project group we are using CMake to generate c++/cli winform
projects and I noticed the work done in commit 79ec7868 (VS: Add Windows
Forms Support, 2013-04-29) was in the right direction for solving some
of the problems we were facing.
The changes as submitted was breaking some functionality in our
projects, so I made some changes that fixes our problems and I believe
that it will also work for others.
* Resx files did not link correctly with the winform h-file so I added
the Resx configuration to the vcxproj file.
* I removed the functionality for setting <CLRSupport> true for the
project based on if an resx-file is pressent. This is preventing
us from using native cpp code. Also this do not address that some
projects will need to set other options like clr:pure, clr:safe.
This could be implemented as a cmake option, so it is possible to
specify exactly what is needed. Existing VSWindowsFormsResx Test
project is updated so it will be working with my changes.
Factor appending of individual flags out into an AppendFlagEscape method
in cmLocalGenerator and teach it to use EscapeForShell. Update all
COMPILE_OPTIONS handling to use AppendFlagEscape.
Override the method in the Xcode generator to use its custom escape
implementation.
Teach the CompileOptions test to add an option that requires escaping
everywhere instead of just with the GNU tools.
ff015ee Genex: Report error if a target file is needed to evaluate link libraries.
b58aff9 Genex: Extend EvaluatingLinkLibraries to also check the top target name.
b1c19ce Genex: Make LINK_LANGUAGE report an error when evaluating link libraries.
0e1cb07 Add missing return after error report.
Expose the internal system information API to the CMake language. For
example, it is useful to see how much memory the system has available to
estimate an upper limit of tests that can run in parallel.
Even with the NMake Makefiles generator, it is not able to properly
clean up after the test.
http://open.cdash.org/testDetails.php?test=193424220&build=2934501
Internal cmake changing into directory: C:/Dashboards/My Tests/CMake-nmake10-x64-continuous/Tests/WarnUnusedCliUnused
Error: cmake execution failed
CMake Error: Error: generator : NMake Makefiles
Does not match the generator used previously: Visual Studio 10
Either remove the CMakeCache.txt file or choose a different binary directory.
Extend the signature
try_compile(RESULT_VAR <bindir> <srcfile> ...)
to allow multiple sources as
try_compile(RESULT_VAR <bindir> SOURCES <srcfile>... ...)
Process the sources to generate a CMakeLists.txt that enables all needed
languages.
Teach the TryCompile test to try cases with two sources of the same
language and of mixed languages. Teach RunCMake.try_compile to cover
error cases for the signature.
If the expression $<TARGET_PROPERTY:prop> appears in the content
of a target property, the target that prop is read from is
the 'head target' of the expression. In contexts such as evaluating
the content of a target property during generation, such
as INCLUDE_DIRECTORIES, the 'head target' is the one on which the
initial request was made.
If evaluating a generator expression which is not a target property
content, the target must be explicitly specified. Such contexts
include add_custom_command and file(GENERATE). The content might
then look like
$<TARGET_PROPERTY:tgt,prop>
However, as there is no HeadTarget set, any generator expressions
evaluated as part of reading prop from tgt which do not specify
the tgt directly report an error.
Modify the logic of the TARGET_PROPERTY generator expression so
that in such contexts, the 'head target' is set to the appropriate
target which was first encountered.
It is common to specify a CMAKE_TOOLCHAIN_FILE and get a warning
for using it despite it not being used.
The WarnUnusedCliUnused test relies on the warning being emitted
each time cmake is run on an existing build. That behavior is changed
by this patch to warn only on the first invokation of CMake, and not
on subsequent invokations (because the variable is in the cache with
the same value). For that test, a clean target is added which clears
the cache and cause the warning to be emitted each time.
As the Ninja generator does not support the feature needed to test
this, it is not tested with that generator.
This command is similar to add_definitions, in that it affects
the compile options of all targets which follow it. The implementation
is similar to the implementation of the include_directories command,
in that it is based on populating a COMPILE_OPTIONS directory property
and using that to initialize the same property on targets.
Unlike the include_directories command however, the add_compile_options
command does not affect previously defined targets. That is, in
the following code, foo will not be compiled with -Wall, but bar
will be:
add_library(foo ...)
add_compile_options(-Wall)
add_library(bar ...)
Use makefile->IssueMessage() to print the unprocessed watch message in a
format consistent with other CMake messages and with a more complete
call stack for the access.
When a watch does not specify a command to call then variable_watch
prints out a message to stderr. Remove code after that which collects
all variable values to construct a message that is never printed.
Otherwise such code causes a READ_ACCESS watch to trigger on all
variables in the currents scope.
Reported-by: Yichao Yu <yyc1992@gmail.com>
Checkout [1] as an example of the test failures. In that particular cases, the
failures is caused by the plus sign in the path being pass unescaped
(buildd-cmake_2.8.9-1~bpo60+1-armel-3Lvkef) to the regexp.
In addition to failures in the log, the following new tests also fail in 2.8.11:
243 - CTestTestMemcheckUnknown (Failed)
244 - CTestTestMemcheckUnknownQuoted (Failed)
248 - CTestTestMemcheckDummyValgrindFailPre (Failed)
249 - CTestTestMemcheckDummyValgrindFailPost (Failed)
250 - CTestTestMemcheckDummyPurify (Failed)
251 - CTestTestMemcheckDummyBC (Failed)
253 - CMake.List (Failed)
[1] https://buildd.debian.org/status/fetch.php?pkg=cmake&arch=armel&ver=2.8.9-1~bpo60%2B1&stamp=1369243896
dc1d025 OS X: Add test for rpaths on Mac.
8576b3f OS X: Add support for @rpath in export files.
00d71bd Xcode: Add rpath support in Xcode generator.
94e7fef OS X: Add RPATH support for Mac.
This fixes bug #13797.
The kinds of changes applied in 373faae5 for frameworks are now
applied to CFBundle. The prefix and suffix for CFBundles are
now handled in cmTarget::GetFullNameInternal.
That will allow things like this:
find_package(Qt4)
qt4_generate_moc(myfile.h moc_myfile.cpp TARGET foo) # Note, foo target doesn't
# exist until below.
add_library(foo ...)
The qt4_generate_moc call would use the INCLUDE_DIRECTORIES from
the foo target using generator expressions. Currently it reads
the INCLUDE_DIRECTORIES directory property, meaning that include_directories()
is required.
Support for the TARGET is also added to qt4_wrap_cpp, but not qt4_automoc,
as that is deprecated in favor of the AUTOMOC target property.
The moc tool reports failure if the Q_INTERFACES macro is used with
an argument which has not appeared with Q_DECLARE_INTERFACE, so that is
the basis of the unit test.
The command line arguments are now always written to a file, which is
passed to moc as the @atfile. This was already the case on Windows, but
now it is used everywhere. The reason for that is that it is not currently
possible to expand the list of includes from a target directly in
a add_custom_command invokation (though that may become possible in the
future). There is not a big disadvantage to using the file anyway on
unix, so having one code path instead of two is also a motivation.
This corresponds to the g++ and clang++
option -fvisibility-inlines-hidden on linux. On Windows with MinGW,
this corresponds to -fno-keep-inline-dllexport. That option is
not supported by clang currently.
This is initialized by CMAKE_<LANG>_VISIBILITY_PRESET. The target
property is used as the operand to the -fvisibility= compile option
with GNU compilers and clang.
Process all arguments in a single loop using a simple state machine.
While at it, fix some error message typos. Also allow LINK_LIBRARIES
with no actual libraries to disable use of the -DLINK_LIBRARIES=...
from the CMAKE_FLAGS. This was already possible in the old logic if
LINK_LIBRARIES was immediately followed by another keyword argument
instead of the end of the argument list, so allow it in general.
Update the RunCMake.try_compile test cases accordingly.
7378792 if: Add test for IS_DIRECTORY
4ab10e0 Merge branch 'master' into fix-FileIsDirectory-SEGV
045d6ae KWSys: Fix SystemTools::FileIsDirectory with long paths (#14176)
Add a RunCMake.if test to cover if() command behavior. Start with a
test for IS_DIRECTORY cases with an existing directory and a long path,
both with a trailing slash.
In Qt 5.1, Qt5::Core has a INTERFACE_QT_MAJOR_VERSION property
of '5', and since CMake 2.8.11, Qt4::QtCore has an
INTERFACE_QT_MAJOR_VERSION of '4'. This was introduced in
commit 4aa10cd6 (FindQt4: Set the INTERFACE_QT_MAJOR_VERSION for
Qt4::QtCore, 2013-03-16), to produce an error if Qt 4 and Qt 5
are erroneously used by the same target. This can also be used
however to determine the Qt major version, and therefore the
particular moc executable to use during automoc steps. This means
that targets in a single buildsystem can use a selection of Qt 4
and Qt 5, and still take advantage of the CMAKE_AUTOMOC feature
without conflicting.
The ExternalData_LINK_CONTENT option tells ExternalData to convert real
data files it finds into content links and to "stage" the original
content in a ".ExternalData_<algo>_<hash>" file. However, after a data
object has been staged it is possible that a user-provided pattern in
the "REGEX:" option will later match the staged object file. We must
not process staged object files even when a user pattern matches them.
Fix the implementation to not match a staged object file as a normal
data file for conversion. Extend the RunCMake.ExternalData test to
cover this case.
The VS 6 IDE does not like spaces in definition values so CMake drops
them and warns. The Tests/CompileDefinitions test C code that looks for
the dropped definitions already knows to skip them, but CMake still
warns. Silence the warnings by avoiding such values in the first place
on VS 6.
The variables in this module are used to configure a header file
with defines whose name depends on the name of the target.
As valid names of targets may be invalid for use as defines, convert
the names of the defines used to C identifiers first. This is already
done in C++ code for the DEFINE_SYMBOL property.
This is not as simple as ensuring that the BASE_NAME is a C identifier,
because most of the define names are configurable, and because use of
a BASE_NAME which is not a C identifier, such as 4square can become a
C identifier by specifying a prefix in the generate_export_header
macro.
They can't be used when evaluating link libraries, but they can be
used for include directories and compile definitions. Later they can
be used for compile options.
The idea is to write to a temp file which contains generator
expressions, and at generate time, evaluate the generator expressions,
and write the result to a file.
Because executables on Windows are limited in the length of command line
it is possible to use, it is common to write command line arguments to a
file instead and specify the file as a source of arguments.
This new FILE(GENERATE) subcommand allows the use of generator
expressions to create such files so that they can be used with
add_custom_command for example.
Make handling of directory separators consistent between
non-bundle and bundle code.
Remove xcode specific flag from cmTarget when getting install_name.
Add (more) consistent convenience functions in cmTarget to get
directories inside of bundles and frameworks to add files to.
This refactor also fixes bug #12263 where frameworks
had the wrong install name when SKIP_BUILD_RPATH.
Also make install_name for frameworks consistent between Makefile
and Xcode generator.
The parent commit added a empty_entry_test shared library to the
IncludeDirectories test. Some toolchains fail to create a shared
library with no user-defined symbols, so provide a dummy symbol.
a7ba452 Add the JOIN generator expression.
96ec314 Make it possible for any genex to have arbitrary content at the end.
bd638ee Rename the method determining if a genex accepts arbitrary content.
dc742fe Extract the ProcessArbitraryContent method.
Both <string> and <cmSystemTools.h> include <stdio.h> one or the other way. It
looks like the CMake header adds a define that will cause another part of the
system header to be used, resulting in conflicting definitions.
6489015 Remove an endif() followed by an if() for the same condition.
e7813b1 Add a test for Qt5Automoc
27fb96b Make the QtAutomoc test compile with either Qt 4 or Qt 5
This allows for example, the buildsystem to use names like 'boost_any'
instead of the overly generic 'any', and still be able to generate
IMPORTED targets called 'boost::any'.
Teach CMakeParseImplicitLinkInfo to convert the CMAKE_LINKER file name
to a regular expression that matches only the original name. Escape
special characters like '+' so they are not treated as regex syntax.
Extend the ImplicitLinkInfoTest to test handling of a CMAKE_LINKER value
with many special characters.
10bc50e Tests: ignore Guard Malloc messages in MemChecker tests
159c3e9 Tests: add a test with custom options passed to valgrind
61ddb93 CTest: fix comment documenting cmBoundsCheckerParser class
cbdfcb0 Tests: add test for non-existent Valgrind suppression file
3b5b758 CTest: drop suppression for gcc 2.9.6 errors from default Valgrind flags
7752253 Tests: verify that memory checker output files are always present
abf1df4 Tests: remove code duplication in CTestTestMemCheck tests
f499422 CTest: remove unreachable code and CTestTestMemcheckUnknown test
dde6306 CTest: use an output file for Valgrind (#14110)
bcc0f3f Tests: create output files for all memory checkers
ac9a5f4 ctest_build: Pass projectDir to GenerateBuildCommand
a6c0299 CTest: Simplify ctest_* command source/build dir lookup
1ca9318 VS: Add test for building MSBuild project in subdir
3cd4000 VS: Use .sln parser to build targets in subdirs with msbuild (#13623)
df035e4 VS: Create parser for Visual Studio .sln files
de8be9e Add projectDir parameter to GenerateBuildCommand
This generator expression joins a list with a separator. The separator
may contain arbitrary content, such as commas, which is ordinarily a
delimiter in the generator expression syntax.
Add support to maintain designer functionality for Visual Studio C++
Windows Forms projects. Also add a test project showing how to use
the CMakeLists.txt file and, when successfully configured, will allow
use of the designer for the included form.
All supported memory checkers now write their output to a file. Use a dummy
checker that ignores the given filename and ensure that the missing file is
reported as error.
The code for the tests is basically the same for all those subtests, so have
one template and configure that for as many tests as possible to make it
easier maintainable.
The memory checker command can't be quoted at this point, because previously it
has been tested that the given file exists, which will fail if the name is
quoted. The CTestTestMemcheckUnknown test aimed to test this case, has always
failed to do so and serves no useful purpose therefore.
The dummy memory tester implementation now understands the command line
switches for all memory checkers to redirect the output to a file. This avoids
triggering the error cases for BoundsChecker and Purify because the output file
does not exist.
Commit b8259c3d (Centralize maintenance of usage requirement include
directories, 2013-04-29) changed the handling of the property.
Previously setting the property directly instead of via
target_link_libraries would not result in transitive include
directory handling.
Clinton Stimpson
Brad King
Bill Hoffman
Rolf Eike Beer
Stephen Kelly
Ben Boeckel
Joseph Snyder
Nils Gladitz
Daniele E. Domenichelli
Alex Ciobanu
David Cole
Timo Rothenpieler
Gereon Kremer
Pedro Navarro
Matt McCormick
Ruslan Baratov
Zack Galbreath
Adrien Destugues
Patrick Reynolds
Ben Boeckel
David Cole
Patrick Gansterer
Robert Maynard
Fredrik Axelsson
Jonas Andersen
Modestas Vainius
John Farrier
Andreas Mohr