Teach add_custom_target to check the policy too. Extend the policy to
disallow reserved target names that we use for builtin targets like
"all".
Extend the RunCMake.CMP0037 test to cover these cases.
Historically these were both added for the Makefile and Visual Studio
generators, respectively. Later the VS generators started using the
CMAKE_MAKE_PROGRAM cache entry to find the IDE build tool, and the
CMAKE_BUILD_TOOL was simply set as an alias.
Fix the documentation to explain that CMAKE_MAKE_PROGRAM is the modern
variable and that CMAKE_BUILD_TOOL is the compatibility alias, not the
other way around. Replace uses of CMAKE_BUILD_TOOL with
CMAKE_MAKE_PROGRAM in CMake-provided modules. Nothing needs to lookup
CMAKE_BUILD_TOOL in the cache, so simply set it as a normal variable.
Re-implement the build_command() command to use "cmake --build" instead
of generating a native build tool invocation directly. This command
will internally invoke the proper native build tool.
This avoids requiring cmGlobalGenerator::GenerateBuildCommand to produce
a string so that it can be later refactored to produce a vector with no
quoting or escaping. It will also allow us to later teach CMake to
delay the decision about which build tool to invoke until after the
project build system is generated to disk. For example, on Visual
Studio 10 and above the preferred command-line tool is MSBuild, but we
need to fall back to devenv if the .sln has Intel Fortran .vfproj files.
bf755c7 set: Add unit tests for set/unset PARENT_SCOPE
bc280f1 set: Fix handling of empty value with PARENT_SCOPE
20afbd5 set: Handle value-less PARENT_SCOPE explicitly
Since commit 7d47c693 (Drop compatibility with CMake < 2.4, 2013-10-08)
we no longer need to use the configure_file IMMEDIATE option to support
compatibility modes less than 2.0.
Allow ExternalData_URL_TEMPLATES to be empty if a value for
ExternalData_OBJECT_STORES is provided. Assume in this use case that
the object stores will already contain all needed objects. Extend the
Module.ExternalData test to cover this case (all objects in stores).
Extend the RunCMake.ExternalData test to cover the non-failure message
case when stores are provided without URL templates.
Split the test cases covering spaces and colons into separate units.
Run the space cases everywhere. Disable the colon cases where they
are known to fail. This approach increases platform coverage for the
test and makes the known-failure logic as local as possible.
No Makefile generator on Windows can generate targets with ':'
in their name because the CMakeFiles/<target>.dir directory cannot
be created. Skip this part of the test on all Windows Make tools.
Commit 239b0c6b (Don't add invalid content to static lib
INTERFACE_LINK_LIBRARIES., 2013-10-20) extended a test which
excercised the logic of the LINK_ONLY generator expression.
Commit ef10b87c (CMP0022: Plain target_link_libraries must populate
link interface, 2013-11-02) removed the instance of LINK_ONLY which
was excercised by that test.
Add a new test which excercises the other instance of LINK_ONLY by
setting the CMP0022 policy to NEW and consuming the contents of the
INTERFACE_LINK_LIBRARIES target property.
Resolve conflict in Source/cmTarget.cxx by integrating the changes to
the internal copy constructor from both sides. Also resolve a logical
conflict by dropping the special case for INTERFACE_LIBRARY targets.
Since cmTarget::SetMakefile already forces CMP0022 to NEW for such
targets we need no special handling.
Resolve conflict in Source/cmTargetLinkLibrariesCommand.h by dropping
the documentation change. We will make the same change in the new
location of the same documentation in a separate commit.
Resolve conflicts in
Tests/RunCMake/CMP0022/CMP0022-WARN-empty-old-stderr.txt
Tests/RunCMake/CMP0022/RunCMakeTest.cmake
by taking the side from the 'policy-CMP0022-fixes' branch.
Since cmTarget::ComputeLinkInterface is called separately for each
"head" target that links a target, the warning we produce when
CMP0022 is not set could be repeated. Add explicit logic to allow
the warning to appear at most once. Multiple copies of the warning
for the same target are almost always identical and therefore
redundant. In the rare case that two copies of the warning are
different, the second can appear in a future run after the first
is fixed.
When cmExportFileGenerator::SetImportLinkInterface exports the old
LINK_INTERFACE_LIBRARIES property values it skips doing so for
non-linkable targets because target->GetLinkInterface returns NULL for
such targets.
Since cmExportFileGenerator::PopulateInterfaceLinkLibrariesProperty
looks at the INTERFACE_LINK_LIBRARIES property directly instead of using
the computed link interface, teach it to skip exporting the property if
target->IsLinkable returns false.
Extend the RunCMake.CMP0022 test with a case covering this. Simply
export an executable target that links to a library that is not
exported.
The CMP0022 NEW behavior is that the INTERFACE_LINK_LIBRARIES property
exactly defines the link interface. The plain target_link_libraries
signature says linking is transitive by default, so it should populate
the property.
Teach the target_link_libraries plain signature to populate the
INTERFACE_LINK_LIBRARIES regardless of the CMP0022 setting. Refactor
the cmTarget::ComputeLinkInterface checks that warn when the policy is
not set to compare the new property to either the explicitly set old
link interface properties or the link implementation fallback for all
linkable target types, not just static libraries.
This fixes a regression in 2.8.12.0 that caused target_link_libraries to
not implement transitive linking in the plain signature once the policy
CMP0022 is set to NEW.
Teach cmGlobalGenerator::CheckTargets to include OBJECT_LIBRARY targets
in the check for source file existence.
Extend the RunCMake.ObjectLibrary test to cover this case.
Teach the cmGeneratorExpressionEvaluator filesystem artifact logic
to reject OBJECT_LIBRARY targets since they have no main artifact.
Without the explicit rejection evaluation falls through to an
internal CMake error message in cmTarget::GetOutputInfo.
Extend the RunCMake.GeneratorExpression test to cover these cases.
In certain scenarios, it is preferable to keep a 'dirty' install prefix
than to clear it, and to expect that content will not be found there.
Add a CMAKE_FIND_NO_INSTALL_PREFIX variable that can be set to disable
searching the install prefix.
Bracket arguments recorded in command invocations inside foreach,
function, and macro blocks should not have any replacements done when
the arguments are replayed later. Teach the RunCMake.Syntax test to
cover these cases.
Add an Escape1 test case covering \-escape cases inside bracket, quoted,
and unquoted arguments. Also cover comments immediately after quoted
and unquoted arguments on lines containing \# escapes.
3e04946 Require CMAKE_<LANG>_COMPILER to be found as a full path
6007f7c CMakeDetermineCompilerId: Always use compiler detected from IDE
332771c CMakeDetermine*Compiler: Remove temporary cache entry
All generators now support detection of the full path to the compiler, so
require it to be so. This will allow CMake<LANG>Information.cmake and
other logic to assume the full path to the compiler tool is available.
The Makefile generators already rejected CMAKE_<LANG>_COMPILER values
that did not name an existing compiler. Extend this error message to
all generators, make it occur as early as possible, and improve the
message with advice about how to set the compiler. If the full path to
the compiler is not known, finish enabling languages with a fatal error
so configuration does not continue.
For now, allow the RC language compiler to not be a full path. Later we
will need to detect the full path to "rc" under the VS IDE.
Add a RunCMake.CompilerNotFound test to cover failure cases.
Fix the RunCMake.CompilerChange test EmptyCompiler case to work
when configuration does not continue past enable_language.
Only valid target names or generator expressions may appear in
the target field of a LINK_ONLY expression.
Other content like link flags should still be added to that property
(wrapped in config-specific generator expressions), but not wrapped
in LINK_ONLY. Otherwise undue warnings would be issued for the
policy CMP0022.
The LINK_ONLY expression only has an effect for actual target
names anyway, so there is no logical deficit.
Set the minimum required version of CMake high enough to avoid the
warning for CMAKE_LEGACY_CYGWIN_WIN32. The warning appears on stderr
and breaks the expected output matching.
It was a subtest of the RunCMake.ObjectLibrary test. However, we need
to test a build with ExternalProject after running CMake, which RunCMake tests
do not do.
Teach the CMake language lexer to treat the \-LF pair terminating a
line ending in an odd number of backslashes inside a quoted argument
as a continuation. Drop the pair from the returned quoted argument
token text. This will allow long lines inside quoted argument
strings to be divided across multiple lines in the source file.
It will also allow quoted argument text to start on the line after
the opening quote. For example, the code:
set(x "\
...")
sets variable "x" to the value "..." with no opening newline.
Previously an odd number of backslashes at the end of a line inside
a quoted argument would put a \-LF pair (or a \-CR pair) literally
in the argument. Then the command-argument evaluator would complain
that the \-escape sequence is invalid. Therefore this syntax is
available to use without changing behavior of valid existing code.
Teach the RunCMake.Syntax test to cover cases of quoted arguments
with lines ending in \, \\, and \\\. Odd counts are continuations.
Drop all behavior activated by setting CMAKE_BACKWARDS_COMPATIBILITY to
a value lower than 2.4, and generate an error when projects or the user
attempt to do so. In the error suggest using a CMake 2.8.x release.
Teach cmake_minimum_required to warn about projects that do not require
at least CMake 2.4. They are not supported by CMake >= 3.0.
Replace the documentation of CMAKE_BACKWARDS_COMPATIBILITY with a
reference to policy CMP0001.
Other warnings for the same policy already have similar output since
commit 81d2793e (Add differing target property content to policy CMP0022
warning, 2013-09-11).
Add cmCommand::Disallowed helper to check the setting of a policy that
disallows the command. Add a RunCMake.DisallowedCommands test
placeholder. Add a Help/policy/DISALLOWED_COMMAND.txt file for
inclusion by each policy document to avoid duplication of the common
text.
Add a string(CONCAT) command to simply concatenate input arguments
together. This will be useful for combining strings from different
quoting syntaxes. Add a RunCMake.string test covering these cases.
Introduce a policy to control the behavior.
The AliasTargets unit test already tests that using a
double-semicolon in the name is not an error. Change the ExportImport
test to use a namespace with a double-semicolon too.
daa0f6f Add Lua-style long brackets and long comments to CMake language
a8c6523 cmListFileLexer: Convert CRLF -> LF newlines explicitly
dbd9333 cmListFileLexer: Allow a leading UTF-8 Byte-Order-Mark (#11137)
5645783 cmListFileLexer: Allow command names with one letter (#14181)
Set the minimum required version of CMake high enough to avoid the
warning for CMAKE_LEGACY_CYGWIN_WIN32. The warning appears on stderr
and breaks the expected output matching.
Teach the CMake language parser to recognize Lua-style "long bracket"
arguments. These start with two '[' separated by zero or more '='
characters e.g. "[[" or "[=[" or "[==[". They end with two ']'
separated by the same number of '=' as the opening bracket. There is no
nesting of brackets of the same level (number of '='). No escapes,
variable expansion, or other processing is performed on the content
between such brackets so they always represent exactly one argument.
Also teach CMake to parse and ignore "long comment" syntax. A long
comment starts with "#" immediately followed by an opening long bracket.
It ends at the matching close long bracket.
Teach the RunCMake.Syntax test to cover long bracket and long comment
cases.
Read input files in binary mode instead of text mode and convert CRLF
newlines to LF newlines explicitly in our own buffer. This is necessary
to read CMake source files with CRLF newlines on platforms whose C
runtime libraries do not transform newlines in text mode. For example,
a Cygwin or Linux binary may not transform CRLF -> LF in files read from
a Windows filesystem. Perform the conversion ourselves to ensure that
multi-line string literals in CMake source files have LF newlines
everywhere.
Teach the lexer to read a UTF-8, UTF-16 BE/LE, or UTF-32 BE/LE
Byte-Order-Mark from the start of a file if any is present. Report an
error on files using UTF-16 or UTF-32 and accept a UTF-8 or missing BOM.
Teach the lexer to treat a single letter as an identifier instead of an
unquoted argument. Outside of a command invocation, the parser treats
an identifier as a command name and an unquoted argument as an error.
Inside of a command invocation, the parser treats an identifier as an
unquoted argument. Therefore this change to the lexer will make what
was previously an error case work with no other behavioral change.
The final location and name of a build-target is not determined
until generate-time. However, reading the LOCATION property from
a target is currently allowed at configure time. Apart from creating
possibly-erroneous results, this has an impact on the implementation
of cmake itself, and prevents some major cleanups from being made.
Disallow reading LOCATION from build-targets with a policy. Port some
existing uses of it in CMake itself to use the TARGET_FILE generator
expression.
Make the API for adding targets string based so that it can easily
use cmGeneratorTarget.
Teach the cmIncludeCommand to generate the exported file at
configure-time instead if it is to be include()d.
The RunCMake.ExportWithoutLanguage test now needs a dummy header.h
file as expected error from export() is now reported after the
missing file error.
f973737 GenerateExportHeader: Port to use message(DEPRECATION)
f69606d Qt4Macros: Port to use message(DEPRECATION)
509c142 message: Add a DEPRECATION mode
1763c31 Set policy CMP0025 to NEW while building CMake itself
aa53ee5 Add policy CMP0025 for Apple Clang compiler id compatibility
ab65862 Clang: Add separate "AppleClang" compiler id
By default, the message is not issued. If CMAKE_ERROR_DEPRECATED
is on, the message is fatal. If CMAKE_WARN_DEPRECATED is on, the
message is a warning.
Previously if headers required to check if a struct has a member can be
compiled with C++ compiler only, the check would fail because the C
compiler fails. As a consequence, the result variable would be set to
false, even if the struct has that particular member.
Teach CHECK_STRUCT_HAS_MEMBER to accept a new optional argument LANGUAGE
that allows one to explicitly set the compiler to use. The new
signature is therefore:
CHECK_STRUCT_HAS_MEMBER (<struct> <member> <header> <variable>
[LANGUAGE <language>])
CMake is aware of the policy's NEW behavior and the AppleClang compiler
id. Set the policy to NEW explicitly to avoid the warning and get the
NEW behavior.
Also teach the RunCMake test infrastructure to build tests with
-DCMAKE_POLICY_DEFAULT_CMP0025=NEW to avoid the policy warning
in test output that must match specific regular expressions.
Currently, export() is executed at configure-time.
One problem with this is that certain exported properties like
the link interface may not be complete at the point the export() is
encountered leading to an incorrect or incomplete exported
representation. Additionally, the generated IMPORTED_LOCATION
property may even be incorrect if commands following the export()
have an effect on it.
Another problem is that it requires the C++ implementation of cmake
to be capable of computing the exported information at configure time.
This is a limitation on the cleanup and maintenance of the code. At
some point in the future, this limitation will be dropped and more
implementation will be moved from cmTarget to cmGeneratorTarget.
This target type only contains INTERFACE_* properties, so it can be
used as a structural node. The target-specific commands enforce
that they may only be used with the INTERFACE keyword when used
with INTERFACE_LIBRARY targets. The old-style target properties
matching LINK_INTERFACE_LIBRARIES_<CONFIG> are always ignored for
this target type.
The name of the INTERFACE_LIBRARY must match a validity generator
expression. The validity is similar to that of an ALIAS target,
but with the additional restriction that it may not contain
double colons. Double colons will carry the meaning of IMPORTED
or ALIAS targets in CMake 2.8.13.
An ALIAS target may be created for an INTERFACE library.
At this point it can not be exported and does not appear in the
buildsystem and project files are not created for them. That may
be added as a feature in a later commit.
The generators need some changes to handle the INTERFACE_LIBRARY
targets returned by cmComputeLinkInterface::GetItems. The Ninja
generator does not use that API, so it doesn't require changes
related to that.
When RunCMake tests run during dynamic analysis, valgrind may add lines
of the form "==[0-9]+==..." to the output. Remove such lines from the
actual output before matching it against the expected output.
Since commit 58e52416 (Warn about arguments not separated by whitespace,
2013-02-16) we warn about arguments not separated by spaces. Loosen the
warning to not complain about left parens not separated by spaces from
the preceding token. This is common in code like "if(NOT(X))".
Teach the RunCMake.Syntax test to cover cases of left parens not
separated by spaces and check that no warning appears.
Set the minimum required version of CMake high enough to avoid the
warning for CMAKE_LEGACY_CYGWIN_WIN32. The warning appears on stderr
and breaks the expected output matching.
In the future CMake will introduce Lua-style long bracket syntax.
Warn about unquoted arguments that in the future will be treated
as opening long brackets.
Teach the RunCMake.Syntax test to cover such cases and ensure that the
warning appears.
Teach the lexer to return tokens for whitespace. Teach the parser to
tolerate the space tokens where whitespace is allowed. Also teach the
parser to diagnose and warn about cases of quoted arguments followed
immediately by another argument. This was accidentally allowed
previously, so we only warn.
Update the RunCMake.Syntax test case StringNoSpace expected stderr to
include the warnings.
If a line inside a string ends in a backslash count the following
newline character as a line increment. Add a test covering this case to
verify that subsequent line numbers are correct.
Test basic unquoted and quoted argument parsing cases including failure
on an unterminated string and an unterminated command invocation. Also
cover arguments not separated by any spaces, which is accidentally
allowed by the current parser.
* The ALIAS name must match a validity regex.
* Executables and libraries may be aliased.
* An ALIAS acts immutable. It can not be used as the lhs
of target_link_libraries or other commands.
* An ALIAS can be used with add_custom_command, add_custom_target,
and add_test in the same way regular targets can.
* The target of an ALIAS can be retrieved with the ALIASED_TARGET
target property.
* An ALIAS does not appear in the generated buildsystem. It
is kept separate from cmMakefile::Targets for that reason.
* A target may have multiple aliases.
* An ALIAS target may not itself have an alias.
* An IMPORTED target may not have an alias.
* An ALIAS may not be exported or imported.
Commit 650e61f8 (Add a convenient way to add the includes install
dir to the INTERFACE., 2013-01-05) introduced an error case for
using the install(TARGETS) command with specified INCLUDES DESTINATION,
but no specified EXPORT set.
It is convenient to use a variable to set the various destinations
for different outputs (as KDE does), and some targets such as
executables are installed but not exported. This was triggering
the error case, but as it is a common case, remove the error.
First, it prevents a NULL dereference and second it reiterates that
targets without languages are not supported by CMake.
Add a RunCMake.ExportWithoutLanguage test exporting a library without a
languages.
Add a new signature to help populate INTERFACE_LINK_LIBRARIES and
LINK_LIBRARIES cleanly in a single call. Add policy CMP0023 to control
whether the keyword signatures can be mixed with uses of the plain
signatures on the same target.
Export the INCLUDES DESTINATION without appending to the
INTERFACE_INCLUDE_DIRECTORIES of the target itself. That way, a target
can be exported multiple times with different INCLUDES DESTINATION
without unintended cross-pollution of export sets.
It accepted an optional argument to test for equality, but no way
to get the linker language of a particular target.
TARGET_PROPERTY provides this flexibility and STREQUAL provides
the necessary API for equality test.
Extend the CompileDefinitions test to cover accessing the
property of another target.
In CMakeDetermineCompilerABI we use try_compile with the COPY_FILE
option to get a copy of the compiled binary used to detect the ABI
information. We already tolerate the case when compilation fails.
However, when compilation appears to succeed but does not produce the
expected executable the try_compile command immediately reports an error
because the COPY_FILE fails.
Tolerate COPY_FILE failure without stopping the overall configuration
process by using the try_compile COPY_FILE_ERROR option to capture the
error message. Log the full error to CMakeError.log and simply report
failure to detect the ABI as if compilation had failed.
Teach the RunCMake.Configure test to cover this case and verify that the
messages show up as expected both in stdout and in CMakeError.log.
3e30d9e TLL: Don't populate old link interface if CMP0022 is NEW.
574fec9 Export: Generate INTERFACE_LINK_LIBRARIES property on targets.
d0a76ea Introduce the INTERFACE_LINK_LIBRARIES property.
ddde61c Introduce the LINK_ONLY generator expression.
5aa9731 GenexEval: Add abstracted access to link interface for a target.
When the COPY_FILE operation fails optionally capture the error message
with a COPY_FILE_ERROR option instead of reporting the error
immediately. This gives callers a chance to do something else or report
the error.
Teach the RunCMake.try_compile test to cover bad argument combinations
involving COPY_FILE_ERROR. Teach the TryCompile test to cover the case
of a COPY_FILE error message captured by COPY_FILE_ERROR.
Use preprocessor loops and add a unit test for the appropriate
policies. All policies whose value is recorded at target creation
time should be part of this list.
When CMake reports failure to configure a project, especially when the
toolchain does not initialize properly, the true reason may be clear
from reading the CMakeFiles/CMake(Output|Error).log files. Advise users
to look at these files if they exist when configuration fails.
Add RunCMake.Configure test to check that the log files are mentioned
when configuration fails.
Always populate the INTERFACE_LINK_LIBRARIES for interface
entries. Don't populate the old interface properties
matching (IMPORTED_)?LINK_INTERFACE_LIBRARIES(_<CONFIG>)?
if CMP0022 is NEW.
Because the INTERFACE_LINK_LIBRARIES property is now populated by
the target_link_libraries when operating on a static library,
make an equivalent change which populates the property with
the same value when the old link_libraries() command is used. This
silences the policy warning in that case.
This property is generated only for targets which have recorded
policy CMP0022 as NEW, and a compatibility mode is added to
additionally export the old interfaces in that case too.
If the old interfaces are not exported, the generated export files
require CMake 2.8.12. Because the unit tests use a version which
is not yet called 2.8.12, temporarily require a lower version.
This property replaces the properties which
match (IMPORTED_)?LINK_INTERFACE_LIBRARIES(_<CONFIG>)?, and is enabled
for IMPORTED targets, and for non-IMPORTED targets only with a policy.
For static libraries, the INTERFACE_LINK_LIBRARIES property is
also used as the source of transitive usage requirements content.
Static libraries still require users to link to all entries in
their LINK_LIBRARIES, but usage requirements such as INCLUDE_DIRECTORIES
COMPILE_DEFINITIONS and COMPILE_OPTIONS can be restricted to only
certain interface libraries.
Because the INTERFACE_LINK_LIBRARIES property is populated unconditionally,
we need to compare the evaluated result of it with the link implementation
to determine whether to issue the policy warning for static libraries. For
shared libraries, the policy warning is issued if the contents of
the INTERFACE_LINK_LIBRARIES property differs from the contents of the
relevant config-specific old LINK_INTERFACE_LIBRARIES property.
Copy cmGlobalVisualStudio11Generator to cmGlobalVisualStudio12Generator
and update version numbers accordingly. Add the VS12 enumeration value.
Add module CMakeVS12FindMake to find MSBuild. Look for MSBuild in its
now-dedicated Windows Registry entry. Teach the platform module
Windows-MSVC to set MSVC12 and document the variable. Teach module
InstallRequiredSystemLibraries to look for the VS 12 runtime libraries.
Teach tests CheckCompilerRelatedVariables, Preprocess, VSExternalInclude,
and RunCMake.GeneratorToolset to treat VS 12 as they do VS 10 and 11.
Inspired-by: Minmin Gong <minmin.gong@gmail.com>
Extend the signature
try_compile(RESULT_VAR <bindir> <srcfile> ...)
to allow multiple sources as
try_compile(RESULT_VAR <bindir> SOURCES <srcfile>... ...)
Process the sources to generate a CMakeLists.txt that enables all needed
languages.
Teach the TryCompile test to try cases with two sources of the same
language and of mixed languages. Teach RunCMake.try_compile to cover
error cases for the signature.
Use makefile->IssueMessage() to print the unprocessed watch message in a
format consistent with other CMake messages and with a more complete
call stack for the access.
When a watch does not specify a command to call then variable_watch
prints out a message to stderr. Remove code after that which collects
all variable values to construct a message that is never printed.
Otherwise such code causes a READ_ACCESS watch to trigger on all
variables in the currents scope.
Reported-by: Yichao Yu <yyc1992@gmail.com>
This is initialized by CMAKE_<LANG>_VISIBILITY_PRESET. The target
property is used as the operand to the -fvisibility= compile option
with GNU compilers and clang.
Process all arguments in a single loop using a simple state machine.
While at it, fix some error message typos. Also allow LINK_LIBRARIES
with no actual libraries to disable use of the -DLINK_LIBRARIES=...
from the CMAKE_FLAGS. This was already possible in the old logic if
LINK_LIBRARIES was immediately followed by another keyword argument
instead of the end of the argument list, so allow it in general.
Update the RunCMake.try_compile test cases accordingly.
7378792 if: Add test for IS_DIRECTORY
4ab10e0 Merge branch 'master' into fix-FileIsDirectory-SEGV
045d6ae KWSys: Fix SystemTools::FileIsDirectory with long paths (#14176)
Add a RunCMake.if test to cover if() command behavior. Start with a
test for IS_DIRECTORY cases with an existing directory and a long path,
both with a trailing slash.
The ExternalData_LINK_CONTENT option tells ExternalData to convert real
data files it finds into content links and to "stage" the original
content in a ".ExternalData_<algo>_<hash>" file. However, after a data
object has been staged it is possible that a user-provided pattern in
the "REGEX:" option will later match the staged object file. We must
not process staged object files even when a user pattern matches them.
Fix the implementation to not match a staged object file as a normal
data file for conversion. Extend the RunCMake.ExternalData test to
cover this case.
The idea is to write to a temp file which contains generator
expressions, and at generate time, evaluate the generator expressions,
and write the result to a file.
Because executables on Windows are limited in the length of command line
it is possible to use, it is common to write command line arguments to a
file instead and specify the file as a source of arguments.
This new FILE(GENERATE) subcommand allows the use of generator
expressions to create such files so that they can be used with
add_custom_command for example.
Commit b8259c3d (Centralize maintenance of usage requirement include
directories, 2013-04-29) changed the handling of the property.
Previously setting the property directly instead of via
target_link_libraries would not result in transitive include
directory handling.
When called with a non-existent LHS target name the user may be trying
to add file-level dependencies. Clarify the error message to explain
the difference between target-level and file-level dependencies. Point
the reader at the commands and options needed for the latter.
The commit to add the INTERFACE_QT_MAJOR_VERSION in qtbase.git
is 14054d45 (Set the INTERFACE_QT_MAJOR_VERSION to 5., 2013-03-16)
which will be part of Qt 5.1.0.
If there is a Qt 5.0.3 release, there is no guarantee it will
contain that commit. Make sure such a Qt version does not fail
with this test if not.
We can do this check only if the TargetName is non-empty, which means
that we're evaluating INTERFACE_INCLUDE_DIRECTORIES from a linked
dependency which was set using target_link_libraries.
It is possible to have relative paths in INCLUDE_DIRECTORIES already
in CMake 2.8.10.2, so that part will require a policy to fix.
It is considered an error if the INTERFACE_INCLUDE_DIRECTORIES contains
a directory which does not exist, which indicates a programmer error
by the upstream, or a packaging error.
One of the RunCMake.CompatibleInterface tests also needs to be updated
due to this change. Non-existant includes were used in the test, but
are not needed.
Check that source and binary directories are not part of the
INTERFACE_INCLUDE_DIRECTORIES for installed IMPORTED targets.
This is limited to directories which do not contain generator
expressions to evaluate. Such paths can only be checked at time
of use of the imported target, which will be done in a follow up
patch.
d90f49b CTest: Fail early without PROJECT_BINARY_DIR (#14005)
2e1c2bd build_command: Fail early without CMAKE_MAKE_PROGRAM (#14005)
4e5cb37 Refactor RunCMake.build_command test to allow more cases
Do not use PROJECT_BINARY_DIR before it is defined. If it is not
defined when needed, fail with an error message suggesting that the
project() command be invoked first.
If CMAKE_MAKE_PROGRAM is not set fail with an error message instead of
crashing. Suggest calling project() or enable_language() first to
ensure that CMAKE_MAKE_PROGRAM is set.
Move the ErrorsOFF/ON common logic from CMakeLists.txt into an
ErrorsCommon file to allow other test cases to be added that do not use
the Errors test logic.
The CMake language implicitly flattens lists so a ";" in a list element
must be escaped with a backslash. List expansion removes backslashes
escaping semicolons to leave raw semicolons in the values. Teach
ExternalData_Add_Test and ExternalData_Expand_Arguments to re-escape
semicolons found in list elements so the resulting argument lists work
as if constructed directly by the set() command.
For example:
ExternalData_Add_Test(Data NAME test1 COMMAND ... "a\\;b")
ExternalData_Expand_Arguments(Data args2 "c\\;d")
add_test(NAME test2 COMMAND ... ${args2})
should be equivalent to
set(args1 "a\\;b")
add_test(NAME test1 COMMAND ... ${args1})
set(args2 "c\\;d")
add_test(NAME test2 COMMAND ... ${args2})
which is equivalent to
add_test(NAME test1 COMMAND ... "a;b")
add_test(NAME test2 COMMAND ... "c;d")
Note that it is not possible to make ExternalData_Add_Test act exactly
like add_test when quoted arguments contain semicolons because the CMake
language flattens lists when constructing function ARGN values. This
re-escape approach at least allows test arguments to have semicolons.
While at it, teach ExternalData APIs to not transform "DATA{...;...}"
arguments because the contained semicolons are non-sensical.
Suggested-by: Jean-Christophe Fillion-Robin <jchris.fillionr@kitware.com>
Move the Tests/FPHSA_InvalidFOUND_VAR test case over to a new
RunCMake.FPHSA test with a BadFoundVar case. The RunCMake tests are
built to cover failure cases easily and robustly.
e83e6a1 Test Unix Makefiles generator support for changing compilers
c307e1c Tests/RunCMake: Allow tests to control build tree behavior
2963c98 Merge branch 'empty-compiler-crash' into compiler-change-cleanup
1df09e5 Delete entire CMakeFiles directory when deleting CMakeCache.txt (#13756)
Add RunCMake.CompilerChange test to cover use of -DCMAKE_C_COMPILER=cc
to change the compiler of an existing build tree. Also test for proper
failure with -DCMAKE_C_COMPILER="" and no CC in the environment.
This is a partial revert of commit 77cecb77 (Add includes and compile
definitions with target_link_libraries., 2012-11-05).
As the interface includes and defines are now determined by the link
closure, there is no need to populate the corresponding properties
explicitly.
ba48e63 Generate config-specific interface link libraries propeties.
deb51a7 Remove unused forward declarations.
9712362 Don't allow utility or global targets in the LINKED expression.
faa927e Make sure INTERFACE properties work with OBJECT libraries.
510fdcb Whitelist target types in target_{include_directories,compile_definitions}
4de7178 Ensure that the build interface includes have been added.
df74bc3 Only append build interface include dirs to particular targets.
d4e5c67 Don't keep track of content determined by target property values.
1fb545a Move a special case for PIC from the genex to the cmTarget code.
57175d5 Only use early evaluation termination for transitive properties.
4cf161a Fix determination of evaluating link libraries.
3a298c0 Fix generation of COMPILE_DEFINITIONS in DependInfo.cmake.
655e98b Ensure type specific compatible interface properties do not intersect.
46e2896 The COMPATIBLE_INTERFACE does not affect the target it is set on.
5f926a5 Test printing origin of include dirs from tll().
7c0ec75 De-duplicate validation of genex target names.
...
Implement generator toolset selection (cmake -T) for VS >= 10 by setting
the PlatformToolset. Extend the RunCMake.GeneratorToolset test case to
verify CMAKE_GENERATOR_TOOLSET when the generator supports -T.
Since commit 485a940e (VS: Simplify MSVC version reporting, 2012-08-23)
all MSVC version information is detected during the compiler id step
from the actual compiler invoked by generated build systems rather than
hard-coded in VS generators. Therefore we can set the PlatformToolset
in VS >= 10 project files and support toolsets from other VS versions.
Reject the option by default. It will be implemented on a per-generator
basis. Pass the setting into try_compile project generation. Add cache
entry CMAKE_GENERATOR_TOOLSET and associated variable documentation to
hold the value persistently.
Add a RunCMake.GeneratorToolset test to cover basic "-T" option cases.
Verify that CMAKE_GENERATOR_TOOLSET is empty without -T, that -T is
rejected when the generator doesn't support it, and that two -T options
are always rejected.
e48d842 Cache context-independent includes on evaluation.
089fe1c Optimize genex evaluation for includes and defines.
179f495 find_package: Reword <package>_NO_INTERFACES documentation
e7b579b Test workaround of bad interface include directories from depends.
77cecb7 Add includes and compile definitions with target_link_libraries.
0b92602 Add the $<LINKED:...> generator expression.
0fa7f69 Add API to check if we're reading a includes or defines property.
2c3654c Add a way to exclude INTERFACE properties from exported targets.
d4297d5 Export targets to a targets file, not a Config file.
df4d2b2 Make it an error for INSTALL_PREFIX to be evaluated.
7ceeba9 Advance more when preprocessing exported strings.
30268b4 Handle reading empty properties defined by the link interface.
5484c60 Merge branch 'vs6-rule-files' into add-ExternalData-module
1fd8d01 ExternalData: Attach download rules to content links in IDEs
a6d3ffc Fix Module.ExternalData test on VS 6
aed590a Fix Module.ExternalData test on Cygwin
06e8ded Merge branch 'fix-atomic-rename-on-Windows' into add-ExternalData-module
e2e0d2e ExternalData: Collapse ../ components in DATA{} paths
ee2abfd ExternalData: Add support for SHA 1 and 2 hash algorithms
aa8b228 ExternalData: Generalize hash algo/ext handling
9e518a8 ExternalData: Allow DATA{} syntax to reference directories
175ed02 ExternalData: Allow ()-groups in series match regex
4befecc ExternalData: Add tests covering interfaces and errors
bcd2580 ExternalData: Improve series matching using an explicit syntax
c0cebcb ExternalData: Remove unused private interface
5275993 ExternalData: Cleanup stray TODO and typo in comments
7bb8344 ExternalData: Do not match directory names when resolving DATA{}
00d801f ExternalData: Remove compatibility with CMake < 2.8.5
...
This is both a short form of using a TARGET_DEFINED expression
together with a TARGET_PROPERTY definition, and a way to strip
non-target content from interface properties when exporting.
Use a trailing slash to reference a directory. Require that a list
of associated files be specified to select from within the directory.
One may simply use DATA{Dir/,REGEX:.*} to reference all files but
get a directory passed on the command line.
Add a Module.ExternalData test to verify data retrieval and test
argument DATA{} references.
Add a RunCMake.ExternalData test to verify error handling and automatic
transformation of a raw data to a content link and staged object.
6063fef Output include directories as LOG messages, not warnings.
aa66748 Specify the target whose includes are being listed.
d70204a Only output includes once after the start of 'generate-time' when debugging.
0d46e9a Store includes from the same include_directories call together.
Otherwise, we get a separate IncludeDirectoriesEntry for each include,
and that causes unnecessary and confusing splitting in the output when
debugging the INCLUDE_DIRECTORIES property.
This new expression allows checking how a policy was set when a target
was created. That information is only recorded for a subset of policies,
so a whitelist is used.
This allows a dependee to inform a target that it should have its
POSITION_INDEPENDENT_CODE property set to ON, or OFF. The value of
the POSITION_INDEPENDENT_CODE property, if set, must be consistent
with any INTERFACE_POSITION_INDEPENDENT_CODE properties on dependees.
Add a test covering the consistency checks on platforms where they run.
Historically CMake has always expanded ${} variable references in the
values given to include_directories(), link_directories(), and
link_libraries(). This has been unnecessary since general ${}
evaluation syntax was added to the language a LONG time ago, but has
remained for compatibility with VERY early CMake versions.
For a long time the re-expansion was a lightweight operation because it
was only processed once at the directory level and the fast-path of
cmMakefile::ExpandVariablesInString was usually taken because values did
not have any '$' in them. Then commit d899eb71 (Call
ExpandVariablesInString for each target's INCLUDE_DIRECTORIES,
2012-02-22) made the operation a bit heavier because the expansion is
now needed on a per-target basis. In the future we will support
generator expressions in INCLUDE_DIRECTORIES with $<> syntax, so the
fast-path in cmMakefile::ExpandVariablesInString will no longer be taken
and re-expansion will be very expensive.
Add policy CMP0019 to skip the re-expansion altogether in NEW behavior.
In OLD behavior perform the expansion but improve the fast-path
heuristic to match ${} but not $<>. If the policy is not set then warn
if expansion actually does anything. We expect this to be encountered
very rarely in practice.
This command works only when building projects using the same
architecture as the running CMake binary. Since it was introduced
CMake has learned macro() and function() to add commands, and the
execute_process() command to launch advanced external computations.
Add a RunCMake.load_command test to verify the warning appears.
It should be possible for example to do this:
"$<AND:${FOO},$<BOOL:${TGT}>,$<BOOL:$<TARGET_PROPERTY:${TGT},PROP>"
such that it works simliarly to the C code:
if (foo && tgt && tgt->prop())
{
}
The example of generator expression code is a little bit contrived as
it could be written other ways with the same functionality. Nevertheless,
as these cases already work and are intentional, test for them.
This fixes a regression introduced in commit 290e92ad (Move
GetIncludeDirectories to cmGeneratorTarget, 2012-09-16) which loops over
cmGeneratorTargets before they get created, so the container is empty.
Otherwise the comma is treated as plain text by ParseContent.
$<STREQUAL:,> should be valid and true.
$<STREQUAL:,something> should be valid and false.
$<STREQUAL:,,> should be non-valid as it is 3 parameters.
$<STREQUAL:something,,> should be non-valid as it is 3 parameters.
Additionally, this allows reporting the correct error for other
expressions. For example $<TARGET_PROPERTY:,> should be invalid
because it has an empty target and empty property. It shouldn't
attempt to read the property ',' on the 'implicit this' target.
The expressions may be parsed and then cached and evaluated multiple
times. They are evaluated lazily so that literals such as ',' can be
treated as universal parameter separators, and can be processed from
results without appearing literally, and without interfering with the
parsing/evaluation of the entire expression.
This expression evaluates to '1' or '0' to indicate whether the build
configuration for which the expression is evaluated matches tha named
configuration. In combination with the "$<0:...>" and "$<1:...>"
expressions this allows per-configuration content to be generated.
Add generator expressions that combine and use boolean test results:
$<0:...> = empty string (ignores "...")
$<1:...> = content of "..."
$<AND:?[,?]...> = '1' if all '?' are '1', else '0'
$<OR:?[,?]...> = '0' if all '?' are '0', else '1'
$<NOT:?> = '0' if '?' is '1', else '1'
These will be useful to evaluate (future) boolean query expressions and
condition content on the results. Include tests and documentation.
Ancient versions of CMake required else(), endif(), and similar block
termination commands to have arguments matching the command starting the
block. This is no longer the preferred style.
Run the following shell code:
for c in else endif endforeach endfunction endmacro endwhile; do
echo 's/\b'"$c"'\(\s*\)(.\+)/'"$c"'\1()/'
done >convert.sed &&
git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' |
egrep -z -v '^(Utilities/cm|Source/kwsys/)' |
egrep -z -v 'Tests/CMakeTests/While-Endwhile-' |
xargs -0 sed -i -f convert.sed &&
rm convert.sed
Previously CMake silently accepted the empty string and added a bogus
dependency on the current directory. Instead warn about the empty file
name and ignore it. We cannot make this an error because there may be
existing projects that accidentally depend on the old behavior.
Add a RunCMake.include test to cover this case.
Since commit e1409ac5 (Support building shared libraries or modules
without soname, 2012-04-22) CMake crashes on the code
add_library(foo SHARED foo.nolang)
because the logic to lookup the language's soname flag was moved from
cmTarget::GetLibraryNames to cmMakefile::GetSONameFlag without its check
for a NULL language. Restore the check for NULL.
Add RunCMake.Languages test to cover language error cases like this one.
Add "RunCMake.include_external_msproject" test to use the TYPE, GUID, and
PLATFORM options to include_external_msproject. Since projects with
custom types and platforms cannot be loaded without special VS plugins
validate the results by directly parsing the generated solution (.sln).
Co-Author: Leonid Yurchenko <nocturne@qarea.com>
Look for a <SubTest>-check.cmake script and load it to check side
effects of the sub test. Provide it with the test source and build tree
paths in variables. Check for a failure message in a result variable.
Since commit ed1ea24c (Fix INSERT to allow inserting to empty list,
2006-05-15) the list command allows insertion into an empty list at
index 0. Fix rejection of insertion at non-zero (negative) indices to
present an error message instead of crashing.
While at it, fix the error message of the GET and REMOVE_AT operations
when the list is empty to not present a bogus allowed range.
Add a "RunCMake.list" test to cover failure cases on empty lists.
Teach the RunCMake.ObjectLibrary test to verify that languages used in
an OBJECT library are propagated to targets that use it so that the
languages can be included in link analysis.
Add "RunCMake.ObjectLibrary" test to verify that unsupported use cases
are rejected with errors:
* An OBJECT library may not reference another object library
* An OBJECT library may not be referenced in target_link_libraries
* An OBJECT library may not contain non-compiling sources
* An OBJECT library may not have pre/post build/link commands
* An OBJECT library may not be installed, exported, or imported
Also verify that invalid $<TARGET_OBJECTS:...> expressions are
diagnosed.
The CMakeCommands.build_command test performs output/error checking
so move it over to RunCMake to re-use the generalized infrastrucure.
This is the only test left using Tests/CMakeCommands/CMakeLists.txt
so remove it.
The CMakeOnly directory added by commit 9a20abf0 (Add infrastructure for
CMake-only tests, 2012-01-11) was sufficient only for tests that always
run CMake to successfully configure a project. Later commit eeaaffcb
(find_package: Test error and warning messages in failure cases,
2012-02-28) added a sample test that covers failure cases.
Generalize the above to create new "RunCMake" test infrastructure that
can run CMake multiple times for a single project with different
variations and check for expected result/stdout/stderr. Allow for both
successful and failing CMake project configuration cases. This will be
useful to test error messages and failure behavior.
Nils Gladitz
Brad King
Daniele E. Domenichelli
Stephen Kelly
Ben Boeckel
Ben Boeckel
Andreas Mohr
Petr Kmoch
Kitware Robot
David Cole
Alex Neundorf