Since commit fd6076d0 (Tests: Pass CMAKE_MAKE_PROGRAM instead of
--build-makeprogram, 2013-11-15) the ExportImport, Fortran, and
MacRuntimePath tests use the value of CMAKE_TEST_MAKEPROGRAM as the
CMAKE_MAKE_PROGRAM for their nested projects configurations.
Teach these tests to initialize CMAKE_TEST_MAKEPROGRAM when it is
not provided, such as when building the tests manually.
Commit 66b290e7 (export(): Process the export() command at generate
time., 2012-10-06 ) refactored export() so that it could evaluate
strings at generate-time. This was intended for evaluating target
properties, but that commit also removed a check for target
existence at configure-time. Restore that check and add a test for
this case.
98093c4 QtAutoUic: Add INTERFACE_AUTOUIC_OPTIONS target property.
02542b4 QtAutoUic: Handle new -include command line parameter.
1242f4e Genex: Add {UPPER,LOWER}_CASE and MAKE_C_IDENTIFIER.
754b321 QtAutogen: Use config without prefix in map key.
5838aba Export: Report error on relative include with genex.
7a3e45b Export: Prefix relative items with genexes in INSTALL_INTERFACE.
f088a32 Export: Process INSTALL_INTERFACE in INCLUDES DESTINATION.
9eedc85 Export: Process relative includes after genex evaluation.
80790f3 Export: Test existing behavior of exporting includes with genexes.
38afc82 target_include_directories: Allow relative path with genex
Transitively consume the property from linked dependents.
Implement configuration-specific support by following the pattern
set out for compile definitions and includes in cmQtAutoGenerators.
Implement support for origin-tracking with CMAKE_DEBUG_TARGET_PROPERTIES.
This is motivated by the needs of KDE, which provides a separate
translation system based on gettext instead of the Qt linguist
translation system. The Qt uic tool provides command line options
for configuring the method used to translate text, and to add an
include directive to the generated file to provide the method.
http://thread.gmane.org/gmane.comp.kde.devel.frameworks/7930/focus=7992
Implement the interface to provide the uic options as a usage-requirement
on the KI18n target, as designed for KDE.
Creates a hierarchy of WiX features from CPack components and component groups.
Switch to the FeatureTree UI in case components have been defined.
Handles the component REQUIRE and HIDDEN options
and the component group EXPANDED option.
Diagnostics which check the sanity of exported include paths
previously skipped over any path containing a generator expression.
Introduce a policy to issue an error message in such cases.
The export files created in the OLD behavior are not usable, because
they contain relative paths or paths to the source or build location
which are not suitable for use on installation. CMake will report an
error on import.
Code such as
target_include_directories(foo INTERFACE
$<INSTALL_INTERFACE:include$<FOO>>
)
should be treated as a relative directory, despite the genex, after
the INSTALL_INTERFACE is stripped away.
Previously, this would generate a relative directory on export, which
would be an error on import, so no policy is needed.
Code such as
install(TARGETS ...
INCLUDES DESTINATION $<INSTALL_INTERFACE:include>
)
should behave as if the INSTALL_INTERFACE wrapper were not present.
In code such as
install(TARGETS ...
INCLUDES DESTINATION $<FOO>include
)
the generator expressions are evaluated at generate-time. Delay
determining whether each entry is a relative path until after
the generator expressions are evaluated. Such relative paths
are based relative to the CMAKE_INSTALL_PREFIX.
Treat paths which are relative and which contain a generator
expression which is not at the beginning as relative to the
source directory.
This matches the behavior of paths which are relative but contain
no generator expression at all.
Previously this would generate a relative path with the IMPORTED
target on export(), which would be a reported as a non-existent
path on import. If used directly in the buildsystem, it would be
reported as a relative path, which is also an error. There is no
need for a policy in this case.
This variable can be useful in cross-compiling contexts where the
sysroot is read-only or where the sysroot should otherwise remain
pristine.
If the new CMAKE_STAGING_PREFIX variable is set, it is used instead
of CMAKE_INSTALL_PREFIX when generating the installation rules in
cmake_install.cmake.
This way, the CMAKE_INSTALL_PREFIX variable
always refers to the installation prefix on the target device, regardless
of whether host==target.
If any -rpath paths passed to the linker contain the CMAKE_STAGING_PREFIX,
the matching path fragments are replaced with the CMAKE_INSTALL_PREFIX.
Matching paths in the -rpath-link are not transformed.
The cross-prefix usr-move workaround is assumed not to require extension
regarding CMAKE_STAGING_PREFIX. The staging area is a single prefix, so
there is no scope for cross-prefix symlinks. The CMAKE_INSTALL_PREFIX
is still used to determine the workaround path, and that variable
remains the relevant one even if CMAKE_STAGING_PREFIX is used. If the
generated export files are deployed to the target, the workaround
will still be in place, and still be employed if required.
4cce44b Help: Document the CMAKE_MAKE_PROGRAM variable in more detail
558c74d VS: Switch to internal CMAKE_MAKE_PROGRAM lookup by generators
5229f2d Tests: Do not use an explicit make program for VS generators
72dd738 Tests: Fix MFC test heuristic for empty CMAKE_TEST_MAKEPROGRAM
fd6076d Tests: Pass CMAKE_MAKE_PROGRAM instead of --build-makeprogram
68031ab Tests: Configure SubProject-Stage2 test more robustly
003d10c Tests: Simplify VSExcludeFromDefaultBuild configuration
e47d934 Tests: Simplify VSProjectInSubdir configuration
e965cb1 Tests: Simplify CTest.BuildCommand.ProjectInSubdir configuration
72bf255 Tests: Pass --build-options to every test
4d1d772 ctest: Teach --build-options to allow zero options
96966b5 ctest: Make the --build-makeprogram optional for --build-and-test
91a0211 Simplify some calls to cmGlobalGenerator::Build
123a060 Teach GenerateBuildCommand to find its own make program
5f5c92b VS: Add internal APIs to find MSBuild, devenv/VCExpress, and msdev
4ac75fd Prefer CMAKE_MAKE_PROGRAM over CMAKE_BUILD_TOOL (#14548)
...
Teach add_custom_target to check the policy too. Extend the policy to
disallow reserved target names that we use for builtin targets like
"all".
Extend the RunCMake.CMP0037 test to cover these cases.
Pass the CMAKE_TEST_MAKEPROGRAM, if any, to each test at CMake time in
the CMAKE_MAKE_PROGRAM cache entry. Pass the CMAKE_TEST_MAKEPROGRAM
into the ExportImport, Fortran, and MacRuntimePath tests so that they
may do the same for the nested project configurations.
Now "ctest --build-and-test" can get the make program from the test
build tree cache, so drop the explicit --build-makeprogram.
Fix the condition that adds the test to check CMAKE_TEST_GENERATOR
rather than the tools used to build CMake. Drop the test on Ninja
because the generator does not support subproject generation anyway.
Stop using the general build_generator_args and pass the
--build-generator options explicitly. Also pass --build-makeprogram
explicitly when CMAKE_TEST_MAKEPROGRAM is available because there is no
CMakeCache.txt in the test project subdirectory from which to pick up
the make program.
Create a CTEST_TEST_DEVENV variable that is set to the
CMAKE_MAKE_PROGRAM used for Visual Studio 7, 8, and 9. It will always
be either "devenv" or "VCExpress", and not "MSBuild". Add the
VSExcludeFromDefaultBuild test only when this variable is set, and use
its value as the --build-makeprogram value.
More work will be needed later to restore the test on VS 10 and above
when devenv is available, but this is the simplest approach for now.
The test is only enabled on VS 10 and above, where the generators now
select for "ctest --build-and-test" the MSBuild tool by default.
Simplify the test configuration by dropping the --build-makeprogram
option and all the logic needed to compute its value. The test will
automatically use MSBuild.
Historically these were both added for the Makefile and Visual Studio
generators, respectively. Later the VS generators started using the
CMAKE_MAKE_PROGRAM cache entry to find the IDE build tool, and the
CMAKE_BUILD_TOOL was simply set as an alias.
Fix the documentation to explain that CMAKE_MAKE_PROGRAM is the modern
variable and that CMAKE_BUILD_TOOL is the compatibility alias, not the
other way around. Replace uses of CMAKE_BUILD_TOOL with
CMAKE_MAKE_PROGRAM in CMake-provided modules. Nothing needs to lookup
CMAKE_BUILD_TOOL in the cache, so simply set it as a normal variable.
Some extra options are for "ctest --build-and-test" directly, and others
are values for "--build-options". Split these two roles out into two
separate variables and update existing uses.
Use "cmake --build" to drive the "install" target from the CMake build
tree itself. This avoids using the heavier "ctest --build-and-test"
just to run the native build tool to drive installation.
Run the bootstrap script through "cmake -P" instead of
"ctest --build-and-test" so that we do not need to abuse
the --build-makeprogram option of the latter.
Re-implement the build_command() command to use "cmake --build" instead
of generating a native build tool invocation directly. This command
will internally invoke the proper native build tool.
This avoids requiring cmGlobalGenerator::GenerateBuildCommand to produce
a string so that it can be later refactored to produce a vector with no
quoting or escaping. It will also allow us to later teach CMake to
delay the decision about which build tool to invoke until after the
project build system is generated to disk. For example, on Visual
Studio 10 and above the preferred command-line tool is MSBuild, but we
need to fall back to devenv if the .sln has Intel Fortran .vfproj files.
bf755c7 set: Add unit tests for set/unset PARENT_SCOPE
bc280f1 set: Fix handling of empty value with PARENT_SCOPE
20afbd5 set: Handle value-less PARENT_SCOPE explicitly
Since commit 7d47c693 (Drop compatibility with CMake < 2.4, 2013-10-08)
we no longer need to use the configure_file IMMEDIATE option to support
compatibility modes less than 2.0.
Allow ExternalData_URL_TEMPLATES to be empty if a value for
ExternalData_OBJECT_STORES is provided. Assume in this use case that
the object stores will already contain all needed objects. Extend the
Module.ExternalData test to cover this case (all objects in stores).
Extend the RunCMake.ExternalData test to cover the non-failure message
case when stores are provided without URL templates.
3bade75 Help: Parse Copyright.txt instead of using current year
2bbf6bd Copyright.txt: Add test to check year range
3ee67d0 Copyright.txt: Update year range to end in 2013
621ba1f cmake-gui: Parse Copyright.txt instead of duplicating notice
993b685 bootstrap: Parse Copyright.txt instead of duplicating notice
Add a CMake.Copyright test that, when the CMake version number knows the
year (as it does in development versions), checks that Copyright.txt has
been updated with the current version year.
Split the test cases covering spaces and colons into separate units.
Run the space cases everywhere. Disable the colon cases where they
are known to fail. This approach increases platform coverage for the
test and makes the known-failure logic as local as possible.
No Makefile generator on Windows can generate targets with ':'
in their name because the CMakeFiles/<target>.dir directory cannot
be created. Skip this part of the test on all Windows Make tools.
Commit 239b0c6b (Don't add invalid content to static lib
INTERFACE_LINK_LIBRARIES., 2013-10-20) extended a test which
excercised the logic of the LINK_ONLY generator expression.
Commit ef10b87c (CMP0022: Plain target_link_libraries must populate
link interface, 2013-11-02) removed the instance of LINK_ONLY which
was excercised by that test.
Add a new test which excercises the other instance of LINK_ONLY by
setting the CMP0022 policy to NEW and consuming the contents of the
INTERFACE_LINK_LIBRARIES target property.
In commit 18412153 (Refactor cmTarget::GetCompileDefinitions...,
2013-06-06) cmQtAutomoc was refactored to get all compile definitions
from the target instead of separately asking the target and querying the
directory-level COMPILE_DEFINITIONS property value. While the
generation process does integrate directory-level COMPILE_DEFINITIONS
into the target definitions, this did not happen until after Automoc
targets are constructed. Therefore the commit regressed use of
directory-level definitions in Automoc targets.
Factor the definition finalization logic out from the
cmGlobalGenerator::CreateGeneratorTargets method into a new
cmGlobalGenerator::FinalizeTargetCompileDefinitions method and call it
before constructing Automoc targets. This will place the
directory-level definitions into the target in time to use them for the
Automoc targets.
Extend the QtAutomoc test to cover this case.
b51696f CMP0022: Update target_link_libraries plain signature documentation
25b7f87 Merge branch 'policy-CMP0022-fixes' into policy-CMP0022-fixes-for-master
0a561a0 CMP0022: Warn about a given target at most once
23d21b7 Do not export INTERFACE_LINK_LIBRARIES from non-linkable targets
ef10b87 CMP0022: Plain target_link_libraries must populate link interface
0e06788 CMP0022: Add test for target_link_libraries plain signature
c0f4a61 CMP0022: Add unit test for null pointer check and message.
4b0cfa7 Merge branch 'output-CMP0022-entries' into policy-CMP0022-fixes
Resolve conflict in Source/cmTarget.cxx by integrating the changes to
the internal copy constructor from both sides. Also resolve a logical
conflict by dropping the special case for INTERFACE_LIBRARY targets.
Since cmTarget::SetMakefile already forces CMP0022 to NEW for such
targets we need no special handling.
Resolve conflict in Source/cmTargetLinkLibrariesCommand.h by dropping
the documentation change. We will make the same change in the new
location of the same documentation in a separate commit.
Resolve conflicts in
Tests/RunCMake/CMP0022/CMP0022-WARN-empty-old-stderr.txt
Tests/RunCMake/CMP0022/RunCMakeTest.cmake
by taking the side from the 'policy-CMP0022-fixes' branch.
Since cmTarget::ComputeLinkInterface is called separately for each
"head" target that links a target, the warning we produce when
CMP0022 is not set could be repeated. Add explicit logic to allow
the warning to appear at most once. Multiple copies of the warning
for the same target are almost always identical and therefore
redundant. In the rare case that two copies of the warning are
different, the second can appear in a future run after the first
is fixed.
When cmExportFileGenerator::SetImportLinkInterface exports the old
LINK_INTERFACE_LIBRARIES property values it skips doing so for
non-linkable targets because target->GetLinkInterface returns NULL for
such targets.
Since cmExportFileGenerator::PopulateInterfaceLinkLibrariesProperty
looks at the INTERFACE_LINK_LIBRARIES property directly instead of using
the computed link interface, teach it to skip exporting the property if
target->IsLinkable returns false.
Extend the RunCMake.CMP0022 test with a case covering this. Simply
export an executable target that links to a library that is not
exported.
The CMP0022 NEW behavior is that the INTERFACE_LINK_LIBRARIES property
exactly defines the link interface. The plain target_link_libraries
signature says linking is transitive by default, so it should populate
the property.
Teach the target_link_libraries plain signature to populate the
INTERFACE_LINK_LIBRARIES regardless of the CMP0022 setting. Refactor
the cmTarget::ComputeLinkInterface checks that warn when the policy is
not set to compare the new property to either the explicitly set old
link interface properties or the link implementation fallback for all
linkable target types, not just static libraries.
This fixes a regression in 2.8.12.0 that caused target_link_libraries to
not implement transitive linking in the plain signature once the policy
CMP0022 is set to NEW.
Teach cmGlobalGenerator::CheckTargets to include OBJECT_LIBRARY targets
in the check for source file existence.
Extend the RunCMake.ObjectLibrary test to cover this case.
Some compilers, such as Clang on OS X, do not want the -g flag for both
generating assembly code and assembling it. Drop the -g flag from
generation of main.s in the Assembler test.
Teach the cmGeneratorExpressionEvaluator filesystem artifact logic
to reject OBJECT_LIBRARY targets since they have no main artifact.
Without the explicit rejection evaluation falls through to an
internal CMake error message in cmTarget::GetOutputInfo.
Extend the RunCMake.GeneratorExpression test to cover these cases.
b54dbeb Test foreach/function/macro handling of bracket arguments
ccdf7e0 macro: Do not substitute for placeholders in bracket arguments
999abb9 macro: Add extra indentation to placeholder substitution code
Instead of removing the depot name, which causes problems when looking
at the file change list in CDash, make the Update test remove a given
prefix from the files retrieved from Update.xml.
In certain scenarios, it is preferable to keep a 'dirty' install prefix
than to clear it, and to expect that content will not be found there.
Add a CMAKE_FIND_NO_INSTALL_PREFIX variable that can be set to disable
searching the install prefix.
Bracket arguments recorded in command invocations inside foreach,
function, and macro blocks should not have any replacements done when
the arguments are replayed later. Teach the RunCMake.Syntax test to
cover these cases.
Simply print out the lines as normal paragraph text. Teach the
CMakeLib.testRST test to cover this syntax. Update the
cmake-developer.7 manual to document support for the directives.
Add an Escape1 test case covering \-escape cases inside bracket, quoted,
and unquoted arguments. Also cover comments immediately after quoted
and unquoted arguments on lines containing \# escapes.
9c87d9c Add automatic rcc invocation for Qt.
84218e1 Add automatic uic invocation for Qt.
94a0ca6 Record which files are skipped by automoc.
18fb758 Run the main executable created in the autogen tests.
e485ba1 Rename the QtAutomoc tests to QtAutogen.
7ce65c3 Add extra checks for the AUTOMOC target property.
32771fc Update output messages for generic use.
f371ab5 Rename RunAutomoc to RunAutogen.
85b3d6e Extract an SetupAutoMocTarget method.
ca124a1 Rename the AutomocInfo.cmake file to be more generic.
a342c9f Move some makefile definitions up away from moc-specific code.
98632ef Add the AUTOGEN_TARGETS_FOLDER and obsolete AUTOMOC_TARGETS_FOLDER.
63378ba Rename some variables to reflect broader scope.
97f1aa3 Rename method to reflect generic use.
4abb111 Rename local variable to reflect generic use.
03878c9 Move variable set to where it is used.
...
3e04946 Require CMAKE_<LANG>_COMPILER to be found as a full path
6007f7c CMakeDetermineCompilerId: Always use compiler detected from IDE
332771c CMakeDetermine*Compiler: Remove temporary cache entry
All generators now support detection of the full path to the compiler, so
require it to be so. This will allow CMake<LANG>Information.cmake and
other logic to assume the full path to the compiler tool is available.
The Makefile generators already rejected CMAKE_<LANG>_COMPILER values
that did not name an existing compiler. Extend this error message to
all generators, make it occur as early as possible, and improve the
message with advice about how to set the compiler. If the full path to
the compiler is not known, finish enabling languages with a fatal error
so configuration does not continue.
For now, allow the RC language compiler to not be a full path. Later we
will need to detect the full path to "rc" under the VS IDE.
Add a RunCMake.CompilerNotFound test to cover failure cases.
Fix the RunCMake.CompilerChange test EmptyCompiler case to work
when configuration does not continue past enable_language.
ff59365 CTest: fix dashboard issues associated with the ctest-fix-run-serial topic
7a665ae CTest: added test for RUN_SERIAL issue #14484384beff CTest: added comments that describe the basic test sorting approach
adbe00d CTest: removed redundant copy of test dependency set
1b750cb CTest: perform cycle test early
6d4d7ca CTest: consider previously failed tests before all others
e809d8c CTest: prioritize tests by their depth in the dependency graph
44017a4 CTest: handle dependent and non dependent test requirements equally
ff6c401 cmTarget: Add interface for compatible numeric properties
e4e20c1 cmTarget: Add enumeration for consistency to expect from properties.
9877769 cmTarget: Assign consistent content back to the property being evaluated.
816b4a8 cmTarget: Make consistentProperty return consistent content.
030800a cmTarget: Add a template to create correct implied content.
Teach the ctest_update implementation to use the p4 command-line
client to perform updates and extract the list of changes.
Add a CTest.UpdateP4 test like those that exist already for the other
version control tools. Make the test available when p4 and the p4d
server are found. During the test launch p4d in the background to
serve a repository from the test directory. Then direct the client
toward this server for the duration of the test.
Only valid target names or generator expressions may appear in
the target field of a LINK_ONLY expression.
Other content like link flags should still be added to that property
(wrapped in config-specific generator expressions), but not wrapped
in LINK_ONLY. Otherwise undue warnings would be issued for the
policy CMP0022.
The LINK_ONLY expression only has an effect for actual target
names anyway, so there is no logical deficit.
Set the minimum required version of CMake high enough to avoid the
warning for CMAKE_LEGACY_CYGWIN_WIN32. The warning appears on stderr
and breaks the expected output matching.
It was a subtest of the RunCMake.ObjectLibrary test. However, we need
to test a build with ExternalProject after running CMake, which RunCMake tests
do not do.
The source files are already processed by cmQtAutomoc to look for
moc includes, so extend that to also look for ui_ includes and
find corresponding .ui files to process.
This replaces the need to invoke qt4_wrap_ui().
As the ui files are not likely to be part of the SOURCES of the
target, store the options associated with them separately in the
cmMakefile for querying during the autogen run.
Don't try to show the windows, which would require a gui capable test
machine, and that's not guaranteed.
Automatically link to qtmain.a on Windows to avoid a policy warning. Set
policy CMP0020 to NEW by increasing the required version.
Don't attempt to run the test when using Windows.
When using the boost MPL library, one can set a define to increase
the limit of how many variadic elements should be supported. The
default for BOOST_MPL_LIMIT_VECTOR_SIZE is 20:
http://www.boost.org/doc/libs/1_36_0/libs/mpl/doc/refmanual/limit-vector-size.html
If the foo library requires that to be set to 30, and the independent
bar library requires it to be set to 40, consumers of both need to set
it to 40.
add_library(foo INTERFACE)
set_property(TARGET foo PROPERTY INTERFACE_boost_mpl_vector_size 30)
set_property(TARGET foo PROPERTY COMPATIBLE_INTERFACE_NUMBER_MAX boost_mpl_vector_size)
target_compile_definitions(foo INTERFACE BOOST_MPL_LIMIT_VECTOR_SIZE=$<TARGET_PROPERTY:boost_mpl_vector_size>)
add_library(bar INTERFACE)
set_property(TARGET bar PROPERTY INTERFACE_boost_mpl_vector_size 40)
# Technically the next two lines are redundant, but as foo and bar are
# independent, they both set these interfaces.
set_property(TARGET bar PROPERTY COMPATIBLE_INTERFACE_NUMBER_MAX boost_mpl_vector_size)
target_compile_definitions(bar INTERFACE BOOST_MPL_LIMIT_VECTOR_SIZE=$<TARGET_PROPERTY:boost_mpl_vector_size>)
add_executable(user)
target_link_libraries(user foo bar)
Because the TARGET_PROPERTY reads the boost_mpl_vector_size property
from the HEAD of the dependency graph (the user target), and because
that property appears in the COMPATIBLE_INTERFACE_NUMBER_MAX of
the dependencies of the user target, the maximum value for it is
chosen for the compile definition, ie, 40.
There are also use-cases for choosing the minimum value of a number.
In Qt, deprecated API can be disabled by version. Setting the
definition QT_DISABLE_DEPRECATED_BEFORE=0 disables no deprecated
API. Setting it to 0x501000 disables API which was deprecated before
Qt 5.1 etc.
If two dependencies require the use of API which was deprecated in
different Qt versions, then COMPATIBLE_INTERFACE_NUMBER_MIN can be
used to ensure that both can compile.
When scanning CMake module files for .rst comments, recognize
bracket comments starting in ".rst:" too. For example:
#[[.rst:
Include the bracket comment content terminated by the closing bracket.
Exclude the line containing the bracket if it starts in "#".
Teach the CMakeLib.testRST test to cover multiple bracket lengths
and ending brackets on lines with and without "#".
Update the cmake-developer.7 manual to document the bracket-comment
syntax for .rst documentation.
Teach the CMake language lexer to treat the \-LF pair terminating a
line ending in an odd number of backslashes inside a quoted argument
as a continuation. Drop the pair from the returned quoted argument
token text. This will allow long lines inside quoted argument
strings to be divided across multiple lines in the source file.
It will also allow quoted argument text to start on the line after
the opening quote. For example, the code:
set(x "\
...")
sets variable "x" to the value "..." with no opening newline.
Previously an odd number of backslashes at the end of a line inside
a quoted argument would put a \-LF pair (or a \-CR pair) literally
in the argument. Then the command-argument evaluator would complain
that the \-escape sequence is invalid. Therefore this syntax is
available to use without changing behavior of valid existing code.
Teach the RunCMake.Syntax test to cover cases of quoted arguments
with lines ending in \, \\, and \\\. Odd counts are continuations.
Drop all behavior activated by setting CMAKE_BACKWARDS_COMPATIBILITY to
a value lower than 2.4, and generate an error when projects or the user
attempt to do so. In the error suggest using a CMake 2.8.x release.
Teach cmake_minimum_required to warn about projects that do not require
at least CMake 2.4. They are not supported by CMake >= 3.0.
Replace the documentation of CMAKE_BACKWARDS_COMPATIBILITY with a
reference to policy CMP0001.
Other warnings for the same policy already have similar output since
commit 81d2793e (Add differing target property content to policy CMP0022
warning, 2013-09-11).
Add cmCommand::Disallowed helper to check the setting of a policy that
disallows the command. Add a RunCMake.DisallowedCommands test
placeholder. Add a Help/policy/DISALLOWED_COMMAND.txt file for
inclusion by each policy document to avoid duplication of the common
text.
Teach cmRST to recognize non-markup lines ending in '::' followed by a
blank line as starting a literal block. Record the whole block as if it
were a literal block directive and print it just like a code block.
Extend the CMakeLib.testRST test to cover such cases.
Move the ProcessDirectiveParsedLiteral and ProcessDirectiveCodeBlock
method internals into an OutputMarkupLines helper. Pass through it a
new "inlineMarkup" parameter and teach OutputLine to understand it.
When false, do not process inline markup. Extend the CMakeLib.testRST
test to cover the two cases.
Add a string(CONCAT) command to simply concatenate input arguments
together. This will be useful for combining strings from different
quoting syntaxes. Add a RunCMake.string test covering these cases.
Introduce a policy to control the behavior.
The AliasTargets unit test already tests that using a
double-semicolon in the name is not an error. Change the ExportImport
test to use a namespace with a double-semicolon too.
The result is that the depends of the target are created.
So,
add_library(somelib foo.cpp)
add_library(anotherlib EXCLUDE_FROM_ALL foo.cpp)
add_library(extra EXCLUDE_FROM_ALL foo.cpp)
target_link_libraries(anotherlib extra)
add_library(iface INTERFACE)
target_link_libraries(iface INTERFACE anotherlib)
Executing 'make iface' will result in the anotherlib and extra targets
being made.
Adding a regular executable to the INTERFACE of an INTERFACE_LIBRARY
will not result in the executable being built with 'make iface' because
of the logic in cmComputeTargetDepends::AddTargetDepend.
So far, this is implemented only for the Makefile generator. Other
generators will follow if this feature is possible for them.
Make INTERFACE_LIBRARY targets part of the all target by default.
Test this by building the all target and making the expected library
EXCLUDE_FROM_ALL.
daa0f6f Add Lua-style long brackets and long comments to CMake language
a8c6523 cmListFileLexer: Convert CRLF -> LF newlines explicitly
dbd9333 cmListFileLexer: Allow a leading UTF-8 Byte-Order-Mark (#11137)
5645783 cmListFileLexer: Allow command names with one letter (#14181)
Set the minimum required version of CMake high enough to avoid the
warning for CMAKE_LEGACY_CYGWIN_WIN32. The warning appears on stderr
and breaks the expected output matching.
This has not been allowed since they were introduced in
commit 91438222 (target_link_libraries: Add LINK_(PUBLIC|PRIVATE)
options, 2011-10-07), but allowing this form makes it more compatible
with the newer PUBLIC and PRIVATE keywords.
Teach the CMake language parser to recognize Lua-style "long bracket"
arguments. These start with two '[' separated by zero or more '='
characters e.g. "[[" or "[=[" or "[==[". They end with two ']'
separated by the same number of '=' as the opening bracket. There is no
nesting of brackets of the same level (number of '='). No escapes,
variable expansion, or other processing is performed on the content
between such brackets so they always represent exactly one argument.
Also teach CMake to parse and ignore "long comment" syntax. A long
comment starts with "#" immediately followed by an opening long bracket.
It ends at the matching close long bracket.
Teach the RunCMake.Syntax test to cover long bracket and long comment
cases.
Read input files in binary mode instead of text mode and convert CRLF
newlines to LF newlines explicitly in our own buffer. This is necessary
to read CMake source files with CRLF newlines on platforms whose C
runtime libraries do not transform newlines in text mode. For example,
a Cygwin or Linux binary may not transform CRLF -> LF in files read from
a Windows filesystem. Perform the conversion ourselves to ensure that
multi-line string literals in CMake source files have LF newlines
everywhere.
Teach the lexer to read a UTF-8, UTF-16 BE/LE, or UTF-32 BE/LE
Byte-Order-Mark from the start of a file if any is present. Report an
error on files using UTF-16 or UTF-32 and accept a UTF-8 or missing BOM.
Teach the lexer to treat a single letter as an identifier instead of an
unquoted argument. Outside of a command invocation, the parser treats
an identifier as a command name and an unquoted argument as an error.
Inside of a command invocation, the parser treats an identifier as an
unquoted argument. Therefore this change to the lexer will make what
was previously an error case work with no other behavioral change.
Create a cmRST class to perform just enough reStructuredText processing
to support display of Help documents in human-readable text format.
This will be used to implement --help-* command-line options.
Support directives "include", "replace", "parsed-literal", "toctree"
(Sphinx), and "cmake-module" (CMake Sphinx Extension to scan .cmake
modules). Support inline CMake Sphinx Domain roles to convert
cross-references to corresponding title text. Support inline
substitutions defined by the "replace" directive, but keep it simple by
requiring replacements to be defined before use.
Add a CMakeLib "testRST" case to cover processing of supported
constructs and compare results against expected output.
With our modern development workflow it is less likely a property will
be added to C++ code without documentation. This mode only existed to
support the DocTest which had very limited coverage of the properties
anyway.
a4263c9 export(): Handle multiple dependent export sets.
66b290e export(): Process the export() command at generate time.
5fe5c32 export(): Set a Makefile on the cmExportBuildFileGenerator.
e383555 cmExportInstallFileGenerator: Fix comment to match reality.
This allows the use of the $<TARGET_FILE:...> generator expression as a
replacement for the use of the LOCATION target property. The use of the
LOCATION target property is now deprecated for in-build targets.
Also drop other checks for older CMake versions:
* Simplify cmake_set_target_folder macro.
* Use find_package(LibArchive) unconditionally.
* Simplify condition for running testVisualStudioSlnParser test.
* Convert two macros to functions.
* Unconditionally run the CTestTestRerunFailed test.
The final location and name of a build-target is not determined
until generate-time. However, reading the LOCATION property from
a target is currently allowed at configure time. Apart from creating
possibly-erroneous results, this has an impact on the implementation
of cmake itself, and prevents some major cleanups from being made.
Disallow reading LOCATION from build-targets with a policy. Port some
existing uses of it in CMake itself to use the TARGET_FILE generator
expression.
Make the API for adding targets string based so that it can easily
use cmGeneratorTarget.
Teach the cmIncludeCommand to generate the exported file at
configure-time instead if it is to be include()d.
The RunCMake.ExportWithoutLanguage test now needs a dummy header.h
file as expected error from export() is now reported after the
missing file error.
f973737 GenerateExportHeader: Port to use message(DEPRECATION)
f69606d Qt4Macros: Port to use message(DEPRECATION)
509c142 message: Add a DEPRECATION mode
7efef02 FindGTK2: Add tests for components and targets in gtk and gtkmm modules
95fc47a FindGTK2: Make pangocairo and cairo optional dependencies
26f790f FindGTK2: Change extra includes -> optional
24e0272 FindGTK2: do not skip target creation if optional dependencies are not found
d5f130c FindGTK2: Refactor _GTK2_ADJUST_LIB_VARS into _GTK2_ADD_TARGET
fffbd72 FindGTK2: Do not add freetype includes if they are not found
b69720d FindGTK2: Add libraries to the GTK2_LIBRARIES variable only when found
425ec40 FindGTK2: Do not link libfreetype
e9f46df FindGTK2: Add config directories only if different from include ones
56a79e1 FindGTK2: Set INTERFACE_COMPILE_DEFINITIONS target property only if not empty
4b47586 FindGTK2: Add check to ensure that target exists
61242cc FindGTK2: Fix gmodule, glibmm, pangoft2, and pangoxft targets
4b876de FindGTK2: Link freetype libs to targets including freetype includes
67e761f FindGTK2: Small cleanup
682eea3 FindGTK2: Do not require the GTK_ prefix in all the internal functions
0bc3763 FindGTK2: Better handling of include directories
...
54ef2be Haiku: Include files cleanup in cmCTest
38d5555 Haiku: Remove outdated preprocessor checks
1dc61f8 Haiku: Remove use of B_COMMON_DIRECTORY
7ebc1cb Haiku: Several fixes to platform module
1763c31 Set policy CMP0025 to NEW while building CMake itself
aa53ee5 Add policy CMP0025 for Apple Clang compiler id compatibility
ab65862 Clang: Add separate "AppleClang" compiler id
Drop the HELP_XCODE workarounds needed on older Xcode versions when
using Xcode >= 5. We now expect builds and rebuilds to work using
proper dependencies with no special help.
By default, the message is not issued. If CMAKE_ERROR_DEPRECATED
is on, the message is fatal. If CMAKE_WARN_DEPRECATED is on, the
message is a warning.
* Do not define BEOS anymore (this includes workarounds which we don't
need most of the time in Haiku, so we prefer opt-in IF(HAIKU) in the
cmake files instead).
* On the other hand, do define UNIX (we are trying to be compliant) and
HAIKU (there is still a number of things we don't do like the
average UNIX clone)
* Do not use UnixPaths, as our filesystem hierarchy isn't anything like
what it expects.
* Do not use -nostart, which the compiler doesn't know about anymore.
This used to be an Haiku extension to gcc, and is equivalent to
-shared which is the default gcc option.
* While "dl" functions are provided in libroot, this is always
implicitly linked so there is no need to tell cmake about it.
* Forcing position-independent code is not needed, so remove it.
* On the other hand, include appropriate linker options for executables
and shared libraries.
* Support for the two available compilers in Haiku (gcc2 and gcc4) and
pick the right headers and libraries according to the currently
selected one.
* With the adoption of the package manager, the directory layout was
changed. Tell cmake where to look for header files and libraries.
* As we don't define BEOS anymore, enable the workaround we still need
for HAIKU as well. This is the lack of a libm (it is part of the
implicitly linked in libroot)
Applied-by: Rolf Eike Beer <eike@sf-mail.de>
Previously if headers required to check if a struct has a member can be
compiled with C++ compiler only, the check would fail because the C
compiler fails. As a consequence, the result variable would be set to
false, even if the struct has that particular member.
Teach CHECK_STRUCT_HAS_MEMBER to accept a new optional argument LANGUAGE
that allows one to explicitly set the compiler to use. The new
signature is therefore:
CHECK_STRUCT_HAS_MEMBER (<struct> <member> <header> <variable>
[LANGUAGE <language>])
This assumes that coverage.py has been run in such a way to produce its
standard XML output. This uses the Cobertura schema and should be somewhat
generalizable.
Add a new command line argument to ctest. This allows users to
rerun tests that failed during the previous call to ctest. This
is accomplished by analyzing the most recently modified file named
"^LastTestsFailed*" in the Testing/Temporary subdirectory of the
project's binary directory.
Add an unset() command option to remove a variable from the calling
scope, just like the set() command's PARENT_SCOPE option. Teach the
Unset test to cover such cases.
CMake is aware of the policy's NEW behavior and the AppleClang compiler
id. Set the policy to NEW explicitly to avoid the warning and get the
NEW behavior.
Also teach the RunCMake test infrastructure to build tests with
-DCMAKE_POLICY_DEFAULT_CMP0025=NEW to avoid the policy warning
in test output that must match specific regular expressions.
Apple distributes their own Clang build with their own version numbers
that differ from upstream Clang. Use the __apple_build_version__ symbol
to identify the Apple Clang compiler and report the Apple Build Version
as the fourth version component in CMAKE_<LANG>_COMPILER_VERSION. Add
Compiler/AppleClang-<lang> and Platform/Darwin-AppleClang-<lang> modules
that simply include the upstream equivalents.
Fix comparisons of CMAKE_<LANG>_COMPILER_ID to Clang in CMake's own
source and tests to account for AppleClang.
Currently, export() is executed at configure-time.
One problem with this is that certain exported properties like
the link interface may not be complete at the point the export() is
encountered leading to an incorrect or incomplete exported
representation. Additionally, the generated IMPORTED_LOCATION
property may even be incorrect if commands following the export()
have an effect on it.
Another problem is that it requires the C++ implementation of cmake
to be capable of computing the exported information at configure time.
This is a limitation on the cleanup and maintenance of the code. At
some point in the future, this limitation will be dropped and more
implementation will be moved from cmTarget to cmGeneratorTarget.
This target type only contains INTERFACE_* properties, so it can be
used as a structural node. The target-specific commands enforce
that they may only be used with the INTERFACE keyword when used
with INTERFACE_LIBRARY targets. The old-style target properties
matching LINK_INTERFACE_LIBRARIES_<CONFIG> are always ignored for
this target type.
The name of the INTERFACE_LIBRARY must match a validity generator
expression. The validity is similar to that of an ALIAS target,
but with the additional restriction that it may not contain
double colons. Double colons will carry the meaning of IMPORTED
or ALIAS targets in CMake 2.8.13.
An ALIAS target may be created for an INTERFACE library.
At this point it can not be exported and does not appear in the
buildsystem and project files are not created for them. That may
be added as a feature in a later commit.
The generators need some changes to handle the INTERFACE_LIBRARY
targets returned by cmComputeLinkInterface::GetItems. The Ninja
generator does not use that API, so it doesn't require changes
related to that.
6a47c37 add_test: Mention generator expressions in old-style add_test docs
d331292 cmTestGenerator: Evaluate generator expressions in test properties
6fe5c4a cmTestGenerator: Separate test properties for each configuration
Re-insert the semicolon which was removed during splitting.
Commit d777b8e7 (Genex: Allow relative paths in INSTALL_INTERFACE.,
2013-07-25) introduced the prefixItems method to allow relative paths
in the argument of the INSTALL_INTERFACE expression. That method was
buggy in that it did not re-introduce the semicolon separator in
the result.
This bug also affects paths which are already absolute in user code.
The lack of Qt4 on a system should silently skip the corresponding tests
with no other messages. This is already the case for other find_package
calls in Tests/CMakeLists.txt.
Xcode 5.0 now relinks targets when their shared libraries dependencies
are modified, and there seems to be no way to stop it. Report this as a
known limitation in the test output and do not fail.
In Tests/Architecture and Tests/BuildDepends/Project we select a set of
OS X cpu architectures to use for the test. Prior to Xcode 4 we always
used i386 and ppc. Starting with Xcode 4, the tools do not support ppc
but do support x86_64, so we switch to that. Fix the version check to
recognize Xcode >= 5 as at least Xcode 4 and use the new architectures.
This is useful for cases like:
add_test(NAME mytest COMMAND mydriver $<TARGET_FILE:myexe>)
set_tests_properties(mytest PROPERTIES
REQUIRED_FILES "$<TARGET_FILE:myexe>"
WORKING_DIRECTORY "${CMAKE_CURRENT_BINARY_DIR}/$<CONFIGURATION>"
)
In this example we require the actual test executable to exist to
run the test in addition to the test driver at argv[0]. Also the
$<CONFIGURATION> expression improves over \${CTEST_CONFIGURATION_TYPE}
because the latter is not normalized for case-sensitive filesystems.
When RunCMake tests run during dynamic analysis, valgrind may add lines
of the form "==[0-9]+==..." to the output. Remove such lines from the
actual output before matching it against the expected output.
In commit 10bc50ea (Tests: ignore Guard Malloc messages in MemChecker
tests, 2013-05-13) we forgot to escape backslashes in the CMake language
to get them into the regex. Add them now.
Add the CMake.PolicyCheck test.
This test uses "git grep" to look for policies added in a "dated"
version of CMake. It will fail if a policy is added as of,
for example, CMake 2.8.11.20130828.
The intent is to prevent such constructs from making it into an
"official" release. Three instances actually appeared in the first
attempted release candidate for 2.8.12.
This test may sometimes yield false positives. After all, it's just
using a regular expression to detect this condition, and something
in a comment could possibly match it. As of right now, that's not
true, but it's easy to imagine such a comment being added.
The new test may also not catch all future problems of this sort.
However, it will catch problems of this sort for all code that follows
the present layout style in Source/cmPolicies.cxx.
The old version encountered a compile error on newer versions of GCC.
Update to the latest supported release of Trilinos, remove the version
number from the name of the Contract, and some other minor tweaks to
get the test passing once more.
This is necessary because custom commands and targets may create
custom files whose names are determined by generator expressions.
For example, clang should be using $<TARGET_FILE> and $<TARGET_FILE_DIR>
instead of reverse engineering the output file name:
http://thread.gmane.org/gmane.comp.compilers.clang.scm/80523
However, that can only be done when ADDITIONAL_MAKE_CLEAN_FILES
also accepts and evaluates generator expressions.
Similarly, KDE uses the LOCATION property where $<TARGET_FILE>
would also be better in KDE4_HANDLE_RPATH_FOR_EXECUTABLE but
also appends the result to ADDITIONAL_MAKE_CLEAN_FILES.
After this patch, both can be ported to generator expressions.
Exclude Ninja and Xcode from the CMP0021 test
They do not behave the same as the makefile generator with
relative paths.
Don't overwrite the header file for in-source builds.
Refactor generation of PASS_REGULAR_EXPRESSION for tests
CTestTestMemcheckDummyPurify
CTestTestMemcheckDummyValgrind
CTestTestMemcheckDummyValgrindPrePost
CTestTestMemcheckDummyValgrindIgnoreMemcheck
Avoid duplicating the normal ctest output matching expression. Use
literal newlines instead of "\n" to improve readability. Integrate
matching of guard-malloc lines at the end of the output with expressions
matching tool output like lines for BullseyeCoverage.
Since commit 58e52416 (Warn about arguments not separated by whitespace,
2013-02-16) we warn about arguments not separated by spaces. Loosen the
warning to not complain about left parens not separated by spaces from
the preceding token. This is common in code like "if(NOT(X))".
Teach the RunCMake.Syntax test to cover cases of left parens not
separated by spaces and check that no warning appears.
Set the minimum required version of CMake high enough to avoid the
warning for CMAKE_LEGACY_CYGWIN_WIN32. The warning appears on stderr
and breaks the expected output matching.
The extendResult method expects a non-empty parameters vector, as
assured by the normal case. Avoid calling the method when the parser
finds an incomplete generator expression, but has already entered
the state of expecting to find parameters.
b93982f Merge branch 'dev/fix-variable-watch-crash' into cmake-syntax
c50f7ed cmListFileLexer: Modify flex output to avoid Borland warning
bf73264 Warn about unquoted arguments that look like long brackets
58e5241 Warn about arguments not separated by whitespace
e75b69f cmListFileCache: Convert CMake language parser to class
e945949 Add RunCMake.Syntax test cases for command invocation styles
0546484 cmListFileArgument: Generalize 'Quoted' bool to 'Delimeter' enum
28685ad cmListFileLexer: Split normal and legacy unquoted arguments
1eafa3e cmListFileLexer: Fix line number after backslash in string
f3155cd Add RunCMake.Syntax test to cover argument parsing
6aa0c21 variable_watch: Add test for watching a variable multiple times
b86e37c variable_watch: Check newValue for NULL
f9bb20f variable_watch: Don't share memory for callbacks
05dad99 variable_watch: Fix a typo in the error message
00ce12a variable_watch: Prevent making extra entries in the watch map
34b397e variable_watch: Allow specifying the data to match in RemoveWatch
e43e207 variable_watch: Match client_data when finding duplicates
0d6acb1 variable_watch: Add a deleter for the client data
fc7c3b4 variable_watch: Store client data as pointers
In the future CMake will introduce Lua-style long bracket syntax.
Warn about unquoted arguments that in the future will be treated
as opening long brackets.
Teach the RunCMake.Syntax test to cover such cases and ensure that the
warning appears.
Teach the lexer to return tokens for whitespace. Teach the parser to
tolerate the space tokens where whitespace is allowed. Also teach the
parser to diagnose and warn about cases of quoted arguments followed
immediately by another argument. This was accidentally allowed
previously, so we only warn.
Update the RunCMake.Syntax test case StringNoSpace expected stderr to
include the warnings.
If a line inside a string ends in a backslash count the following
newline character as a line increment. Add a test covering this case to
verify that subsequent line numbers are correct.
Test basic unquoted and quoted argument parsing cases including failure
on an unterminated string and an unterminated command invocation. Also
cover arguments not separated by any spaces, which is accidentally
allowed by the current parser.
The output file used for memory checker runs must be unique for every test run
in parallel, so simply make them unique for every test run. Simply use the test
index to avoid collisions.
The Borland-built CTest binary has trouble running many instances of
itself in parallel, making the test unreliable. No particular recent
change appears to be the culprit and the failure is not reliably
reproducible. Just silence the failure for now by skipping the test.
* The ALIAS name must match a validity regex.
* Executables and libraries may be aliased.
* An ALIAS acts immutable. It can not be used as the lhs
of target_link_libraries or other commands.
* An ALIAS can be used with add_custom_command, add_custom_target,
and add_test in the same way regular targets can.
* The target of an ALIAS can be retrieved with the ALIASED_TARGET
target property.
* An ALIAS does not appear in the generated buildsystem. It
is kept separate from cmMakefile::Targets for that reason.
* A target may have multiple aliases.
* An ALIAS target may not itself have an alias.
* An IMPORTED target may not have an alias.
* An ALIAS may not be exported or imported.
33e6e0b VS6: Add handling of CMAKE_*_LINKER_FLAGS_<CONFIG> variables
152dfda Add additonal tests for the linker flags
20ed496 Add documentation for the missing CMAKE_*_LINKER_FLAGS_* variables
54f7019 Add CMAKE_STATIC_LINKER_FLAGS to CMakeCommonLanguageInclude
2a43c30 Add support for CMAKE_STATIC_LINKER_FLAGS
14bbf83 Unify the way the flags of a static library are read
The VS 6 IDE does not want to recompile a particular source after
a particular header it includes is modified, even by hand. For
now just silence the failure and document it with a comment.
The new feature of install(TARGETS ... INCLUDES DESTINATION) introduced
in commit 650e61f8 (Add a convenient way to add the includes install
dir to the INTERFACE., 2013-01-05) introduced this crash. If the
new feature is used with a target which has no
INTERFACE_INCLUDE_DIRECTORIES, a segfault occurred.
Commit 650e61f8 (Add a convenient way to add the includes install
dir to the INTERFACE., 2013-01-05) introduced an error case for
using the install(TARGETS) command with specified INCLUDES DESTINATION,
but no specified EXPORT set.
It is convenient to use a variable to set the various destinations
for different outputs (as KDE does), and some targets such as
executables are installed but not exported. This was triggering
the error case, but as it is a common case, remove the error.
This reverts commit 6187876dea.
It was actually possible before to have paths with spaces in them, the spaces
just need to be quoted. This way spaces will work as argument separators.
First, it prevents a NULL dereference and second it reiterates that
targets without languages are not supported by CMake.
Add a RunCMake.ExportWithoutLanguage test exporting a library without a
languages.
Teach the Preprocess test to get, set, and then get the same value for
the COMPILE_DEFINITIONS target property and verify that the value is not
changed. This ensures the internal structured storage of the property
value can reproduce the original string value.
Add a new signature to help populate INTERFACE_LINK_LIBRARIES and
LINK_LIBRARIES cleanly in a single call. Add policy CMP0023 to control
whether the keyword signatures can be mixed with uses of the plain
signatures on the same target.
Export the INCLUDES DESTINATION without appending to the
INTERFACE_INCLUDE_DIRECTORIES of the target itself. That way, a target
can be exported multiple times with different INCLUDES DESTINATION
without unintended cross-pollution of export sets.
It accepted an optional argument to test for equality, but no way
to get the linker language of a particular target.
TARGET_PROPERTY provides this flexibility and STREQUAL provides
the necessary API for equality test.
Extend the CompileDefinitions test to cover accessing the
property of another target.
bf23891 CPackWIX: Add support for custom WiX templates
155bb01 CMakeCPack: Provide an upgrade guid for WiX
bfa2e29 CPackWIX: Add option to specify the language(s) of the installer
6e51ea9 CPackWIX: Handle multiple shortcuts in the start menu
6d77e1a CPackWIX: Fix MSI package layout regression from parent
8c0e325 CPackWIX: Handle CPACK_PACKAGE_EXECUTABLES (#13967)
If one of the libraries (_DEBUG or _RELEASE) is not set, the value is
set to the value of the other one. FindQt4, from which the macro is
extracted, sets the values to XXX_LIBRARY_{DEBUG,RELEASE}-NOTFOUND
instead. In both cases the XXX_LIBRARY is correct, but using NOTFOUND
makes it easier to understand which one is missing.
Update Tests/CMakeOnly/SelectLibraryConfigurations with the new logic.
In CMakeDetermineCompilerABI we use try_compile with the COPY_FILE
option to get a copy of the compiled binary used to detect the ABI
information. We already tolerate the case when compilation fails.
However, when compilation appears to succeed but does not produce the
expected executable the try_compile command immediately reports an error
because the COPY_FILE fails.
Tolerate COPY_FILE failure without stopping the overall configuration
process by using the try_compile COPY_FILE_ERROR option to capture the
error message. Log the full error to CMakeError.log and simply report
failure to detect the ABI as if compilation had failed.
Teach the RunCMake.Configure test to cover this case and verify that the
messages show up as expected both in stdout and in CMakeError.log.
The test uses generate_export_header(cmp0022OLD ...) to generate the
cmp0022_export.h header used by both cmp0022OLD and cmp0022NEW. In
the latter the _EXPORTS symbol does not match what the header expects
so the library does not export anything. The Watcom linker does not
like to create shared libraries that do not export any symbols.
Fix this by setting the DEFINE_SYMBOL property on cmp0022NEW to match
that of cmp0022OLD as the header expects.
9cf3547 Add the INTERFACE_SYSTEM_INCLUDE_DIRECTORIES target property.
1925cff Add a SYSTEM parameter to target_include_directories (#14180)
286f227 Extend the cmTargetPropCommandBase interface property handling.
83498d4 Store system include directories in the cmTarget.
f1fcbe3 Add Target API to determine if an include is a system include.
2679a34 Remove unused variable.
Unlike other target properties, this does not have a corresponding
non-INTERFACE variant.
This allows propagation of system attribute on include directories
from link dependents.
3e30d9e TLL: Don't populate old link interface if CMP0022 is NEW.
574fec9 Export: Generate INTERFACE_LINK_LIBRARIES property on targets.
d0a76ea Introduce the INTERFACE_LINK_LIBRARIES property.
ddde61c Introduce the LINK_ONLY generator expression.
5aa9731 GenexEval: Add abstracted access to link interface for a target.
When the COPY_FILE operation fails optionally capture the error message
with a COPY_FILE_ERROR option instead of reporting the error
immediately. This gives callers a chance to do something else or report
the error.
Teach the RunCMake.try_compile test to cover bad argument combinations
involving COPY_FILE_ERROR. Teach the TryCompile test to cover the case
of a COPY_FILE error message captured by COPY_FILE_ERROR.
If CMAKE_<lang>_FLAGS contains quotes or other CMake language characters
they must be escaped when written into the generated CMakeLists.txt file
so that the test project parses them properly.
Teach the TryCompile test to cover this case by adding a flag with
quotes into CMAKE_C_FLAGS during a C language try_compile.
Use preprocessor loops and add a unit test for the appropriate
policies. All policies whose value is recorded at target creation
time should be part of this list.
When CMake reports failure to configure a project, especially when the
toolchain does not initialize properly, the true reason may be clear
from reading the CMakeFiles/CMake(Output|Error).log files. Advise users
to look at these files if they exist when configuration fails.
Add RunCMake.Configure test to check that the log files are mentioned
when configuration fails.
Always populate the INTERFACE_LINK_LIBRARIES for interface
entries. Don't populate the old interface properties
matching (IMPORTED_)?LINK_INTERFACE_LIBRARIES(_<CONFIG>)?
if CMP0022 is NEW.
Because the INTERFACE_LINK_LIBRARIES property is now populated by
the target_link_libraries when operating on a static library,
make an equivalent change which populates the property with
the same value when the old link_libraries() command is used. This
silences the policy warning in that case.
This property is generated only for targets which have recorded
policy CMP0022 as NEW, and a compatibility mode is added to
additionally export the old interfaces in that case too.
If the old interfaces are not exported, the generated export files
require CMake 2.8.12. Because the unit tests use a version which
is not yet called 2.8.12, temporarily require a lower version.
This property replaces the properties which
match (IMPORTED_)?LINK_INTERFACE_LIBRARIES(_<CONFIG>)?, and is enabled
for IMPORTED targets, and for non-IMPORTED targets only with a policy.
For static libraries, the INTERFACE_LINK_LIBRARIES property is
also used as the source of transitive usage requirements content.
Static libraries still require users to link to all entries in
their LINK_LIBRARIES, but usage requirements such as INCLUDE_DIRECTORIES
COMPILE_DEFINITIONS and COMPILE_OPTIONS can be restricted to only
certain interface libraries.
Because the INTERFACE_LINK_LIBRARIES property is populated unconditionally,
we need to compare the evaluated result of it with the link implementation
to determine whether to issue the policy warning for static libraries. For
shared libraries, the policy warning is issued if the contents of
the INTERFACE_LINK_LIBRARIES property differs from the contents of the
relevant config-specific old LINK_INTERFACE_LIBRARIES property.
If a non-IMPORTED library is added to the INTERFACE_LINK_LIBRARIES
of a IMPORTED target, the non-IMPORTED target needs to become a
target dependency and link dependency of the consuming target.
This is already the case since commit 30962029 (Make targets depend
on the link interface of their dependees, 2012-12-26), and fixed in
the parent commit, so test that it works.
9a76d83 VS12: Find proper MSBuild for VSProjectInSubdir test
4e5cb39 Merge branch 'master' into vs12-generator
78fdbbc FindBoost: Add -vc120 mangling for VS 12
e99d7b1 VS12: Generate flag tables from MSBuild v120 tool files
77ac9b8 VS12: Add Visual Studio 12 generator (#14251)
539356f Ninja: Custom Command file depends don't need to exist before building
874e171 Ninja: GlobalNinjaGenerator WriteBuild and WritePhonyBuild non static
88d27ad Add a test to expose a bug with add_custom_command and ninja.
If the CTest make program is not msbuild we find the msbuild
corresponding to the current test generator. In the case of
VS 12 search for the msbuild it provides.
Copy cmGlobalVisualStudio11Generator to cmGlobalVisualStudio12Generator
and update version numbers accordingly. Add the VS12 enumeration value.
Add module CMakeVS12FindMake to find MSBuild. Look for MSBuild in its
now-dedicated Windows Registry entry. Teach the platform module
Windows-MSVC to set MSVC12 and document the variable. Teach module
InstallRequiredSystemLibraries to look for the VS 12 runtime libraries.
Teach tests CheckCompilerRelatedVariables, Preprocess, VSExternalInclude,
and RunCMake.GeneratorToolset to treat VS 12 as they do VS 10 and 11.
Inspired-by: Minmin Gong <minmin.gong@gmail.com>
In my project group we are using CMake to generate c++/cli winform
projects and I noticed the work done in commit 79ec7868 (VS: Add Windows
Forms Support, 2013-04-29) was in the right direction for solving some
of the problems we were facing.
The changes as submitted was breaking some functionality in our
projects, so I made some changes that fixes our problems and I believe
that it will also work for others.
* Resx files did not link correctly with the winform h-file so I added
the Resx configuration to the vcxproj file.
* I removed the functionality for setting <CLRSupport> true for the
project based on if an resx-file is pressent. This is preventing
us from using native cpp code. Also this do not address that some
projects will need to set other options like clr:pure, clr:safe.
This could be implemented as a cmake option, so it is possible to
specify exactly what is needed. Existing VSWindowsFormsResx Test
project is updated so it will be working with my changes.
Factor appending of individual flags out into an AppendFlagEscape method
in cmLocalGenerator and teach it to use EscapeForShell. Update all
COMPILE_OPTIONS handling to use AppendFlagEscape.
Override the method in the Xcode generator to use its custom escape
implementation.
Teach the CompileOptions test to add an option that requires escaping
everywhere instead of just with the GNU tools.
ff015ee Genex: Report error if a target file is needed to evaluate link libraries.
b58aff9 Genex: Extend EvaluatingLinkLibraries to also check the top target name.
b1c19ce Genex: Make LINK_LANGUAGE report an error when evaluating link libraries.
0e1cb07 Add missing return after error report.
Expose the internal system information API to the CMake language. For
example, it is useful to see how much memory the system has available to
estimate an upper limit of tests that can run in parallel.
Even with the NMake Makefiles generator, it is not able to properly
clean up after the test.
http://open.cdash.org/testDetails.php?test=193424220&build=2934501
Internal cmake changing into directory: C:/Dashboards/My Tests/CMake-nmake10-x64-continuous/Tests/WarnUnusedCliUnused
Error: cmake execution failed
CMake Error: Error: generator : NMake Makefiles
Does not match the generator used previously: Visual Studio 10
Either remove the CMakeCache.txt file or choose a different binary directory.
Extend the signature
try_compile(RESULT_VAR <bindir> <srcfile> ...)
to allow multiple sources as
try_compile(RESULT_VAR <bindir> SOURCES <srcfile>... ...)
Process the sources to generate a CMakeLists.txt that enables all needed
languages.
Teach the TryCompile test to try cases with two sources of the same
language and of mixed languages. Teach RunCMake.try_compile to cover
error cases for the signature.
If the expression $<TARGET_PROPERTY:prop> appears in the content
of a target property, the target that prop is read from is
the 'head target' of the expression. In contexts such as evaluating
the content of a target property during generation, such
as INCLUDE_DIRECTORIES, the 'head target' is the one on which the
initial request was made.
If evaluating a generator expression which is not a target property
content, the target must be explicitly specified. Such contexts
include add_custom_command and file(GENERATE). The content might
then look like
$<TARGET_PROPERTY:tgt,prop>
However, as there is no HeadTarget set, any generator expressions
evaluated as part of reading prop from tgt which do not specify
the tgt directly report an error.
Modify the logic of the TARGET_PROPERTY generator expression so
that in such contexts, the 'head target' is set to the appropriate
target which was first encountered.
It is common to specify a CMAKE_TOOLCHAIN_FILE and get a warning
for using it despite it not being used.
The WarnUnusedCliUnused test relies on the warning being emitted
each time cmake is run on an existing build. That behavior is changed
by this patch to warn only on the first invokation of CMake, and not
on subsequent invokations (because the variable is in the cache with
the same value). For that test, a clean target is added which clears
the cache and cause the warning to be emitted each time.
As the Ninja generator does not support the feature needed to test
this, it is not tested with that generator.
This command is similar to add_definitions, in that it affects
the compile options of all targets which follow it. The implementation
is similar to the implementation of the include_directories command,
in that it is based on populating a COMPILE_OPTIONS directory property
and using that to initialize the same property on targets.
Unlike the include_directories command however, the add_compile_options
command does not affect previously defined targets. That is, in
the following code, foo will not be compiled with -Wall, but bar
will be:
add_library(foo ...)
add_compile_options(-Wall)
add_library(bar ...)
Use makefile->IssueMessage() to print the unprocessed watch message in a
format consistent with other CMake messages and with a more complete
call stack for the access.
When a watch does not specify a command to call then variable_watch
prints out a message to stderr. Remove code after that which collects
all variable values to construct a message that is never printed.
Otherwise such code causes a READ_ACCESS watch to trigger on all
variables in the currents scope.
Reported-by: Yichao Yu <yyc1992@gmail.com>
Checkout [1] as an example of the test failures. In that particular cases, the
failures is caused by the plus sign in the path being pass unescaped
(buildd-cmake_2.8.9-1~bpo60+1-armel-3Lvkef) to the regexp.
In addition to failures in the log, the following new tests also fail in 2.8.11:
243 - CTestTestMemcheckUnknown (Failed)
244 - CTestTestMemcheckUnknownQuoted (Failed)
248 - CTestTestMemcheckDummyValgrindFailPre (Failed)
249 - CTestTestMemcheckDummyValgrindFailPost (Failed)
250 - CTestTestMemcheckDummyPurify (Failed)
251 - CTestTestMemcheckDummyBC (Failed)
253 - CMake.List (Failed)
[1] https://buildd.debian.org/status/fetch.php?pkg=cmake&arch=armel&ver=2.8.9-1~bpo60%2B1&stamp=1369243896
dc1d025 OS X: Add test for rpaths on Mac.
8576b3f OS X: Add support for @rpath in export files.
00d71bd Xcode: Add rpath support in Xcode generator.
94e7fef OS X: Add RPATH support for Mac.
This fixes bug #13797.
The kinds of changes applied in 373faae5 for frameworks are now
applied to CFBundle. The prefix and suffix for CFBundles are
now handled in cmTarget::GetFullNameInternal.
That will allow things like this:
find_package(Qt4)
qt4_generate_moc(myfile.h moc_myfile.cpp TARGET foo) # Note, foo target doesn't
# exist until below.
add_library(foo ...)
The qt4_generate_moc call would use the INCLUDE_DIRECTORIES from
the foo target using generator expressions. Currently it reads
the INCLUDE_DIRECTORIES directory property, meaning that include_directories()
is required.
Support for the TARGET is also added to qt4_wrap_cpp, but not qt4_automoc,
as that is deprecated in favor of the AUTOMOC target property.
The moc tool reports failure if the Q_INTERFACES macro is used with
an argument which has not appeared with Q_DECLARE_INTERFACE, so that is
the basis of the unit test.
The command line arguments are now always written to a file, which is
passed to moc as the @atfile. This was already the case on Windows, but
now it is used everywhere. The reason for that is that it is not currently
possible to expand the list of includes from a target directly in
a add_custom_command invokation (though that may become possible in the
future). There is not a big disadvantage to using the file anyway on
unix, so having one code path instead of two is also a motivation.
This corresponds to the g++ and clang++
option -fvisibility-inlines-hidden on linux. On Windows with MinGW,
this corresponds to -fno-keep-inline-dllexport. That option is
not supported by clang currently.
This is initialized by CMAKE_<LANG>_VISIBILITY_PRESET. The target
property is used as the operand to the -fvisibility= compile option
with GNU compilers and clang.
Process all arguments in a single loop using a simple state machine.
While at it, fix some error message typos. Also allow LINK_LIBRARIES
with no actual libraries to disable use of the -DLINK_LIBRARIES=...
from the CMAKE_FLAGS. This was already possible in the old logic if
LINK_LIBRARIES was immediately followed by another keyword argument
instead of the end of the argument list, so allow it in general.
Update the RunCMake.try_compile test cases accordingly.
7378792 if: Add test for IS_DIRECTORY
4ab10e0 Merge branch 'master' into fix-FileIsDirectory-SEGV
045d6ae KWSys: Fix SystemTools::FileIsDirectory with long paths (#14176)
Add a RunCMake.if test to cover if() command behavior. Start with a
test for IS_DIRECTORY cases with an existing directory and a long path,
both with a trailing slash.
In Qt 5.1, Qt5::Core has a INTERFACE_QT_MAJOR_VERSION property
of '5', and since CMake 2.8.11, Qt4::QtCore has an
INTERFACE_QT_MAJOR_VERSION of '4'. This was introduced in
commit 4aa10cd6 (FindQt4: Set the INTERFACE_QT_MAJOR_VERSION for
Qt4::QtCore, 2013-03-16), to produce an error if Qt 4 and Qt 5
are erroneously used by the same target. This can also be used
however to determine the Qt major version, and therefore the
particular moc executable to use during automoc steps. This means
that targets in a single buildsystem can use a selection of Qt 4
and Qt 5, and still take advantage of the CMAKE_AUTOMOC feature
without conflicting.
The ExternalData_LINK_CONTENT option tells ExternalData to convert real
data files it finds into content links and to "stage" the original
content in a ".ExternalData_<algo>_<hash>" file. However, after a data
object has been staged it is possible that a user-provided pattern in
the "REGEX:" option will later match the staged object file. We must
not process staged object files even when a user pattern matches them.
Fix the implementation to not match a staged object file as a normal
data file for conversion. Extend the RunCMake.ExternalData test to
cover this case.
The VS 6 IDE does not like spaces in definition values so CMake drops
them and warns. The Tests/CompileDefinitions test C code that looks for
the dropped definitions already knows to skip them, but CMake still
warns. Silence the warnings by avoiding such values in the first place
on VS 6.
The variables in this module are used to configure a header file
with defines whose name depends on the name of the target.
As valid names of targets may be invalid for use as defines, convert
the names of the defines used to C identifiers first. This is already
done in C++ code for the DEFINE_SYMBOL property.
This is not as simple as ensuring that the BASE_NAME is a C identifier,
because most of the define names are configurable, and because use of
a BASE_NAME which is not a C identifier, such as 4square can become a
C identifier by specifying a prefix in the generate_export_header
macro.
They can't be used when evaluating link libraries, but they can be
used for include directories and compile definitions. Later they can
be used for compile options.
The idea is to write to a temp file which contains generator
expressions, and at generate time, evaluate the generator expressions,
and write the result to a file.
Because executables on Windows are limited in the length of command line
it is possible to use, it is common to write command line arguments to a
file instead and specify the file as a source of arguments.
This new FILE(GENERATE) subcommand allows the use of generator
expressions to create such files so that they can be used with
add_custom_command for example.
Make handling of directory separators consistent between
non-bundle and bundle code.
Remove xcode specific flag from cmTarget when getting install_name.
Add (more) consistent convenience functions in cmTarget to get
directories inside of bundles and frameworks to add files to.
This refactor also fixes bug #12263 where frameworks
had the wrong install name when SKIP_BUILD_RPATH.
Also make install_name for frameworks consistent between Makefile
and Xcode generator.
The parent commit added a empty_entry_test shared library to the
IncludeDirectories test. Some toolchains fail to create a shared
library with no user-defined symbols, so provide a dummy symbol.
a7ba452 Add the JOIN generator expression.
96ec314 Make it possible for any genex to have arbitrary content at the end.
bd638ee Rename the method determining if a genex accepts arbitrary content.
dc742fe Extract the ProcessArbitraryContent method.
Both <string> and <cmSystemTools.h> include <stdio.h> one or the other way. It
looks like the CMake header adds a define that will cause another part of the
system header to be used, resulting in conflicting definitions.
6489015 Remove an endif() followed by an if() for the same condition.
e7813b1 Add a test for Qt5Automoc
27fb96b Make the QtAutomoc test compile with either Qt 4 or Qt 5
This allows for example, the buildsystem to use names like 'boost_any'
instead of the overly generic 'any', and still be able to generate
IMPORTED targets called 'boost::any'.
Teach CMakeParseImplicitLinkInfo to convert the CMAKE_LINKER file name
to a regular expression that matches only the original name. Escape
special characters like '+' so they are not treated as regex syntax.
Extend the ImplicitLinkInfoTest to test handling of a CMAKE_LINKER value
with many special characters.
10bc50e Tests: ignore Guard Malloc messages in MemChecker tests
159c3e9 Tests: add a test with custom options passed to valgrind
61ddb93 CTest: fix comment documenting cmBoundsCheckerParser class
cbdfcb0 Tests: add test for non-existent Valgrind suppression file
3b5b758 CTest: drop suppression for gcc 2.9.6 errors from default Valgrind flags
7752253 Tests: verify that memory checker output files are always present
abf1df4 Tests: remove code duplication in CTestTestMemCheck tests
f499422 CTest: remove unreachable code and CTestTestMemcheckUnknown test
dde6306 CTest: use an output file for Valgrind (#14110)
bcc0f3f Tests: create output files for all memory checkers
ac9a5f4 ctest_build: Pass projectDir to GenerateBuildCommand
a6c0299 CTest: Simplify ctest_* command source/build dir lookup
1ca9318 VS: Add test for building MSBuild project in subdir
3cd4000 VS: Use .sln parser to build targets in subdirs with msbuild (#13623)
df035e4 VS: Create parser for Visual Studio .sln files
de8be9e Add projectDir parameter to GenerateBuildCommand
This generator expression joins a list with a separator. The separator
may contain arbitrary content, such as commas, which is ordinarily a
delimiter in the generator expression syntax.
Add support to maintain designer functionality for Visual Studio C++
Windows Forms projects. Also add a test project showing how to use
the CMakeLists.txt file and, when successfully configured, will allow
use of the designer for the included form.
All supported memory checkers now write their output to a file. Use a dummy
checker that ignores the given filename and ensure that the missing file is
reported as error.
The code for the tests is basically the same for all those subtests, so have
one template and configure that for as many tests as possible to make it
easier maintainable.
The memory checker command can't be quoted at this point, because previously it
has been tested that the given file exists, which will fail if the name is
quoted. The CTestTestMemcheckUnknown test aimed to test this case, has always
failed to do so and serves no useful purpose therefore.
The dummy memory tester implementation now understands the command line
switches for all memory checkers to redirect the output to a file. This avoids
triggering the error cases for BoundsChecker and Purify because the output file
does not exist.
Commit b8259c3d (Centralize maintenance of usage requirement include
directories, 2013-04-29) changed the handling of the property.
Previously setting the property directly instead of via
target_link_libraries would not result in transitive include
directory handling.
This allows the ctest_build command's TARGET option to name a target
in a subdirectory and still build properly with msbuild.
Add test case covering use of ctest_build() with such a TARGET.
Add test covering cmGlobalGenerator::GenerateBuildCommand for VS
solutions with MSBuild and building a target defined in a subdirectory
and not part of ALL.
Create class cmVisualStudioSlnParser as a generic parser for Visual
Studio .sln files. Implement minimum functionality but keep class
extensible. Add tests for the class.
Use the suggestion from http://support.microsoft.com/kb/2262855 to escape
semicolons in preprocessor definitions for VS >= 10. Update the
COMPILE_DEFINITIONS documentation disclaimer list of known limitations
accordingly. Update our "Preprocess" test to cover the case.
Suggested-by: Jean-Christophe Fillion-Robin <jchris.fillionr@kitware.com>
The MS tools create two types of PDB files as explained here:
http://msdn.microsoft.com/en-us/library/yd4f8bd1%28v=vs.71%29.aspxhttp://msdn.microsoft.com/en-us/library/yd4f8bd1%28v=vs.80%29.aspxhttp://msdn.microsoft.com/en-us/library/yd4f8bd1%28v=vs.90%29.aspxhttp://msdn.microsoft.com/en-us/library/yd4f8bd1%28v=vs.100%29.aspx
One is created by the compiler (/Fd) and the other by the linker (/pdb).
The two options should not specify the same file. Split them up.
In the VS IDE generators, simply drop ProgramDataBaseFileName to
take the VS default "/Fd$(IntDir)vc$(PlatformToolsetVersion).pdb".
In the Makefile generators, set "/Fd" on the compile line to be
the directory containing object files (with a trailing slash the
compiler will add the "vc$(PlatformToolsetVersion).pdb" filename
automatically). Drop the /Fd option from the exe link command
line and add "/pdb" instead (already done for dll linking).
Update these rules for both MSVC and Intel tools.
Drop support for PDB_OUTPUT_DIRECTORY and PDB_NAME in STATIC
libraries because the generated .pdb files are only from /Fd
and not real linker-generated .pdb files. Update documentation to
clarify that the PDB_* properties are only for linker .pdb files.
This regresses the PDBDirectoryAndName test for STATIC libraries.
Since it is not clear at this time what should be done for STATIC
library .pdb files, comment out the relevant portion of the test
and leave a TODO comment.
When called with a non-existent LHS target name the user may be trying
to add file-level dependencies. Clarify the error message to explain
the difference between target-level and file-level dependencies. Point
the reader at the commands and options needed for the latter.
The commit to add the INTERFACE_QT_MAJOR_VERSION in qtbase.git
is 14054d45 (Set the INTERFACE_QT_MAJOR_VERSION to 5., 2013-03-16)
which will be part of Qt 5.1.0.
If there is a Qt 5.0.3 release, there is no guarantee it will
contain that commit. Make sure such a Qt version does not fail
with this test if not.
We can do this check only if the TargetName is non-empty, which means
that we're evaluating INTERFACE_INCLUDE_DIRECTORIES from a linked
dependency which was set using target_link_libraries.
It is possible to have relative paths in INCLUDE_DIRECTORIES already
in CMake 2.8.10.2, so that part will require a policy to fix.
It is considered an error if the INTERFACE_INCLUDE_DIRECTORIES contains
a directory which does not exist, which indicates a programmer error
by the upstream, or a packaging error.
One of the RunCMake.CompatibleInterface tests also needs to be updated
due to this change. Non-existant includes were used in the test, but
are not needed.
Check that source and binary directories are not part of the
INTERFACE_INCLUDE_DIRECTORIES for installed IMPORTED targets.
This is limited to directories which do not contain generator
expressions to evaluate. Such paths can only be checked at time
of use of the imported target, which will be done in a follow up
patch.
In particular, this checks that CTest's use of select() has a sufficient
file descriptor set size limit (FD_SETSIZE) to handle many child
processes at the same time. Running 20 tests requires more than 64
descriptors, the Cygwin default that we override.
Rename the variable added by commit 9ce1b9ef (Add
CMAKE_BUILD_INTERFACE_INCLUDES build-variable, 2012-11-25) to
CMAKE_INCLUDE_CURRENT_DIR_IN_INTERFACE to be more consistent with the
existing CMAKE_INCLUDE_CURRENT_DIR variable.
Suggested-by: Alex Neundorf <neundorf@kde.org>
We can't find both preprocessing expressions at once, because then
the BUILD_INTERFACE will always be favored if both are present, even
if INSTALL_INTERFACE appears first.
This was affecting the behavior of install(EXPORT) because the
INTERFACE_INCLUDE_DIRECTORIES contained entries like
/foo/include;$<INSTALL_INTERFACE:/bar/include>
As the INSTALL_INTERFACE always evaluates to '0', it always needs
to be preprocessed properly.
Since commit e03f83f3 (ProcessorCount test: fix path to cmsysTestsCxx
executable, 2013-01-24) the directory references a target that is not
built when BUILD_TESTING is OFF. It makes no sense to add tests without
BUILD_TESTING anyway.
While at it, use add_subdirectory instead of subdirs to add CMakeTests.
d90f49b CTest: Fail early without PROJECT_BINARY_DIR (#14005)
2e1c2bd build_command: Fail early without CMAKE_MAKE_PROGRAM (#14005)
4e5cb37 Refactor RunCMake.build_command test to allow more cases
Do not use PROJECT_BINARY_DIR before it is defined. If it is not
defined when needed, fail with an error message suggesting that the
project() command be invoked first.
If CMAKE_MAKE_PROGRAM is not set fail with an error message instead of
crashing. Suggest calling project() or enable_language() first to
ensure that CMAKE_MAKE_PROGRAM is set.
Move the ErrorsOFF/ON common logic from CMakeLists.txt into an
ErrorsCommon file to allow other test cases to be added that do not use
the Errors test logic.
Commit 79568f95 (automoc: Add source file to target early to set the
linker language, 2013-02-20) changed automoc initialization to a two
step process. In the first step, the generated source file was added
to the target, which allows the link language to be determined.
However, this bypassed the check for the availability of Qt itself.
At build-time the automoc file could not be generated because the moc
tool was not available to create it.
The solution is to only add the automoc file to the target if Qt is
found.
The CMake language implicitly flattens lists so a ";" in a list element
must be escaped with a backslash. List expansion removes backslashes
escaping semicolons to leave raw semicolons in the values. Teach
ExternalData_Add_Test and ExternalData_Expand_Arguments to re-escape
semicolons found in list elements so the resulting argument lists work
as if constructed directly by the set() command.
For example:
ExternalData_Add_Test(Data NAME test1 COMMAND ... "a\\;b")
ExternalData_Expand_Arguments(Data args2 "c\\;d")
add_test(NAME test2 COMMAND ... ${args2})
should be equivalent to
set(args1 "a\\;b")
add_test(NAME test1 COMMAND ... ${args1})
set(args2 "c\\;d")
add_test(NAME test2 COMMAND ... ${args2})
which is equivalent to
add_test(NAME test1 COMMAND ... "a;b")
add_test(NAME test2 COMMAND ... "c;d")
Note that it is not possible to make ExternalData_Add_Test act exactly
like add_test when quoted arguments contain semicolons because the CMake
language flattens lists when constructing function ARGN values. This
re-escape approach at least allows test arguments to have semicolons.
While at it, teach ExternalData APIs to not transform "DATA{...;...}"
arguments because the contained semicolons are non-sensical.
Suggested-by: Jean-Christophe Fillion-Robin <jchris.fillionr@kitware.com>
Extend the range of valid target names with the + sign. This character
can commonly be used for target names, such as those containing 'c++'.
Add a test but skip it for Borland and Watcom tools which do not support
the character.
Suggested-By: Benjamin Kloster
12fb50d GetPrerequisites: Add documentation for objdump
8eb2fe9 GetPrerequisites: Enable test for BundleUtilities on MinGW
33c94c8 GetPrerequisites: Add support for objdump
5260a86 GetPrerequisites: Move tool search paths up
cbf0756 Revert "Add the TARGET_DEFINED generator expression"
21a342c Remove use of TARGET_DEFINED from the target_link_libraries test.
47b8d32 Remove use of TARGET_DEFINED from the ExportImport test.
2e39d21 Remove use of TARGET_DEFINED from target_include_directories test.
8dfdf1c Fix the tests for evaluating includes and defines.
98a6725 Fix constness of accessors.
7e70744 Expand includes and defines transitively in 'external' genexes.
d1a2729 Fix DAG checker finding cycling dependencies.
e72eaad Workaround broken code where a target has itself in its link iface.
ec2c67b Strip stray semicolons when evaluating generator expressions.
236133e Handle targets in the LINK_LIBRARIES of try_compile.
1c0597c Add a new Export generator for IMPORTED targets.
f2ab17d Keep track of all targets seen while evaluating a genex.
This reverts commit 2bee6f5ba5.
This expression is not used, and has a semantic which is not completely
optimal (namely considering utility targets to be targets, though
usually we are interested in linkable targets).
Remove it so that we have more freedom to define better expressions in
the future.
Conflicts:
Source/cmGeneratorExpressionEvaluator.cxx
Tests/CMakeCommands/target_compile_definitions/CMakeLists.txt
Tests/CMakeCommands/target_compile_definitions/consumer.cpp
Update the unit test introduced in commit 57175d55 (Only use early
evaluation termination for transitive properties., 2013-02-07) to
not use the expression, but still test the appropriate code.
Update the unit test introduced in commit 5daaa5c4 (Fix TARGET_PROPERTY
target extractions., 2013-01-26) to not use the expression, but still
test the appropriate code.
Change the unit test introduced in commit 24dcf0c0 (Make sure
generator expressions can be used with target_include_directories.,
2013-01-16) to not use the expression, but still test the appropriate
code.
We should also check whether the INTERFACE_ variant of a property
is being read, and in the case of the compile definitions, we should
test the _<CONFIG> suffixed variants. That is already available
through the use of the methods.
This way, we use the ALREADY_SEEN optimization when evaluating
the includes of a target in 'external' generator expressions, ie, those
used in a add_custom_command invokation, as opposed to evaluating the
INCLUDE_DIRECTORIES of a target itself via GetIncludeDirectories.
This means that we can use expressions of the form
$<TARGET_PROPERTY:foo,INTERFACE_INCLUDE_DIRECTORIES>
to get a list of the interface include directories of foo, including
those coming from dependencies.
We can't have a test of a target which has a single include directory in
its INCLUDE_DIRECTORIES because the shell on the MSYS platforms transforms
a single include directory to include a prefix, which is not what the test
expects. We test a target with two directories instead as a means to
test a target with no link dependencies.
Move the Tests/FPHSA_InvalidFOUND_VAR test case over to a new
RunCMake.FPHSA test with a BadFoundVar case. The RunCMake tests are
built to cover failure cases easily and robustly.
Imported targets are re-exported so that they can be used by the
try_compile generated code with target_link_libraries.
This makes the use of the cmake_expand_imported_targets macro
obsolete. The macro is not able to expand the generator expressions
which may appear in the IMPORTED_LINK_INTERFACE_LIBRARIES content.
Instead it just sees them as 'not a target'.
In the new mode FPHSA now accepts a FOUND_VAR option, which can be set
either to ExactCase_FOUND or UPPERCASE_FOUND, no other values are
accepted. Also add tests for that, including failure.
Alex
Previously, GetIncludeDirectories was called before calling
target->AddSourceFile(mocCppSource). Since commit a1c4905f (Use the
link information as a source of compile definitions and
includes., 2013-02-12), the include directories are determined by
the link information.
Valid link information requires that the linker language can be
determined, which depends on the source files languages and the
dependent targets languages. In the case of the no_link_languages
target in the unit test, there are no dependencies and the additional
source file no_link_languages_automoc.cpp is added to the target
at generate-time. That file can be used to determine the linker
language, but it must be added to the target before calling
GetIncludeDirectories.
Extend the Module.ExternalData test to cover a DATA{} reference whose
name contains a space. Skip the case when the native build tool does
not support spaces.
Some make tools do not support spaces inside the source tree paths.
Decide early whether to add tests that depend on support for spaces so
we can use the result in a decision for any test.
e83e6a1 Test Unix Makefiles generator support for changing compilers
c307e1c Tests/RunCMake: Allow tests to control build tree behavior
2963c98 Merge branch 'empty-compiler-crash' into compiler-change-cleanup
1df09e5 Delete entire CMakeFiles directory when deleting CMakeCache.txt (#13756)
Add RunCMake.CompilerChange test to cover use of -DCMAKE_C_COMPILER=cc
to change the compiler of an existing build tree. Also test for proper
failure with -DCMAKE_C_COMPILER="" and no CC in the environment.
This reverts commit 2c3654c3de.
The removal of some tests added in commit 77cecb77 (Add includes and compile
definitions with target_link_libraries., 2012-11-05) are also squashed
into this commit.
This is a partial revert of commit 77cecb77 (Add includes and compile
definitions with target_link_libraries., 2012-11-05).
As the interface includes and defines are now determined by the link
closure, there is no need to populate the corresponding properties
explicitly.
ba48e63 Generate config-specific interface link libraries propeties.
deb51a7 Remove unused forward declarations.
9712362 Don't allow utility or global targets in the LINKED expression.
faa927e Make sure INTERFACE properties work with OBJECT libraries.
510fdcb Whitelist target types in target_{include_directories,compile_definitions}
4de7178 Ensure that the build interface includes have been added.
df74bc3 Only append build interface include dirs to particular targets.
d4e5c67 Don't keep track of content determined by target property values.
1fb545a Move a special case for PIC from the genex to the cmTarget code.
57175d5 Only use early evaluation termination for transitive properties.
4cf161a Fix determination of evaluating link libraries.
3a298c0 Fix generation of COMPILE_DEFINITIONS in DependInfo.cmake.
655e98b Ensure type specific compatible interface properties do not intersect.
46e2896 The COMPATIBLE_INTERFACE does not affect the target it is set on.
5f926a5 Test printing origin of include dirs from tll().
7c0ec75 De-duplicate validation of genex target names.
...
This is needed in the case that Automoc is used, as that calls
GetIncludeDirectories, which may cache the resulting include dirs
too early in the generate step.
Also, because the automoc step is so early, we can't cache the
include directories at that point. At that point the build interface
of all dependencies are not populated yet, so we'd be caching the
includes before appending the build interface. Only start caching
when we're definitely generating the buildsystem. At that point, the
includes should be stable.
We still need to invoke AppendBuildInterfaceIncludes
in the GlobalGenerator because the build interface includes affect
mostly the dependencies of targets (such as the automoc targets),
rather than the targets themselves, so the build interface needs
to be appended for all targets before generation is done.
All ctest --build-and-test invocations require the options
--build-generator ${CMAKE_GENERATOR}
--build-makeprogram ${CMAKE_TEST_MAKEPROGRAM}
to be passed and have consistent values, except for a few special cases.
Collect the generator options in a variable instead of repeating the
options everywhere explicitly.
Implement generator toolset selection (cmake -T) for VS >= 10 by setting
the PlatformToolset. Extend the RunCMake.GeneratorToolset test case to
verify CMAKE_GENERATOR_TOOLSET when the generator supports -T.
Since commit 485a940e (VS: Simplify MSVC version reporting, 2012-08-23)
all MSVC version information is detected during the compiler id step
from the actual compiler invoked by generated build systems rather than
hard-coded in VS generators. Therefore we can set the PlatformToolset
in VS >= 10 project files and support toolsets from other VS versions.
Reject the option by default. It will be implemented on a per-generator
basis. Pass the setting into try_compile project generation. Add cache
entry CMAKE_GENERATOR_TOOLSET and associated variable documentation to
hold the value persistently.
Add a RunCMake.GeneratorToolset test to cover basic "-T" option cases.
Verify that CMAKE_GENERATOR_TOOLSET is empty without -T, that -T is
rejected when the generator doesn't support it, and that two -T options
are always rejected.
We need to make sure expressions which evaluate TARGET_PROPERTY:TYPE
multiple times for example get the correct result each time, and
not an empty string instead.
Teach CMakeParseImplicitLinkInfo to convert implicit link library full
paths to a canonical form. This makes them more reproducible in case
different language compiler front-ends add the same library by different
paths e.g. ".../libA.a" and "...//libA.a".
Add a case to the CMake.ImplicitLinkInfo test to cover removal of extra
slashes from both library and directory paths.
e48d842 Cache context-independent includes on evaluation.
089fe1c Optimize genex evaluation for includes and defines.
179f495 find_package: Reword <package>_NO_INTERFACES documentation
e7b579b Test workaround of bad interface include directories from depends.
77cecb7 Add includes and compile definitions with target_link_libraries.
0b92602 Add the $<LINKED:...> generator expression.
0fa7f69 Add API to check if we're reading a includes or defines property.
2c3654c Add a way to exclude INTERFACE properties from exported targets.
d4297d5 Export targets to a targets file, not a Config file.
df4d2b2 Make it an error for INSTALL_PREFIX to be evaluated.
7ceeba9 Advance more when preprocessing exported strings.
30268b4 Handle reading empty properties defined by the link interface.
5484c60 Merge branch 'vs6-rule-files' into add-ExternalData-module
1fd8d01 ExternalData: Attach download rules to content links in IDEs
a6d3ffc Fix Module.ExternalData test on VS 6
aed590a Fix Module.ExternalData test on Cygwin
06e8ded Merge branch 'fix-atomic-rename-on-Windows' into add-ExternalData-module
e2e0d2e ExternalData: Collapse ../ components in DATA{} paths
ee2abfd ExternalData: Add support for SHA 1 and 2 hash algorithms
aa8b228 ExternalData: Generalize hash algo/ext handling
9e518a8 ExternalData: Allow DATA{} syntax to reference directories
175ed02 ExternalData: Allow ()-groups in series match regex
4befecc ExternalData: Add tests covering interfaces and errors
bcd2580 ExternalData: Improve series matching using an explicit syntax
c0cebcb ExternalData: Remove unused private interface
5275993 ExternalData: Cleanup stray TODO and typo in comments
7bb8344 ExternalData: Do not match directory names when resolving DATA{}
00d801f ExternalData: Remove compatibility with CMake < 2.8.5
...
Run the test with the ctest --build-noclean option. The test
CMakeLists.txt file already uses file(REMOVE_RECURSE) to clean out
downloaded data anyway. Some file removed by "msdev ... /clean" causes
CMake to re-run in the middle of the build step and file(REMOVE_RECURSE)
wipes out already-generated files.
This establishes that linking is used to propagate usage-requirements
between targets in CMake code. The use of the target_link_libraries
command as the API for this is chosen because introducing a new command
would introduce confusion due to multiple commands which differ only in
a subtle way.
This is both a short form of using a TARGET_DEFINED expression
together with a TARGET_PROPERTY definition, and a way to strip
non-target content from interface properties when exporting.
The test added by commit e378ba5f (Add CTestLimitDashJ test, 2012-12-26)
crashes with CTest compiled by Borland 5.8. There seems to be interaction
among the large number of internal ctest runs. It is probably related to
the undiscovered underlying issue mentioned in commit 32478069 (CTest:
Prevent creation of unbounded number of tests in ctest, 2012-12-18) when
fixing the symptom covered by the CTestLimitDashJ test.
Add --force-new-ctest-process to avoid the crash. Further investigation
will still be needed to identify the true problem.
Use a trailing slash to reference a directory. Require that a list
of associated files be specified to select from within the directory.
One may simply use DATA{Dir/,REGEX:.*} to reference all files but
get a directory passed on the command line.
Refactor use of the ExternalData_SERIES_MATCH value to avoid assuming
that it has no ()-groups that interfere with group indexing.
Extend the Module.ExternalData test to cover this case.
Add a Module.ExternalData test to verify data retrieval and test
argument DATA{} references.
Add a RunCMake.ExternalData test to verify error handling and automatic
transformation of a raw data to a content link and staged object.
7bf490e Make subclasses responsible for joining content.
f6b16d4 Don't allow targets args in the new target commands.
b3a7e19 Make the Property name protected so that subclasses can use it.
We need to make sure we can export targets which have content such
as $<0:$<TARGET_PROPERTY:not_a_target,INTERFACE_INCLUDE_DIRECTORIES>
That means making not finding a target non-fatal here.
These interface-related link-libraries properties are used to determine
the value of the other INTERFACE properties, so we were getting infinite
recursion and segfaults otherwise.
6063fef Output include directories as LOG messages, not warnings.
aa66748 Specify the target whose includes are being listed.
d70204a Only output includes once after the start of 'generate-time' when debugging.
0d46e9a Store includes from the same include_directories call together.
830246e Export the COMPATIBLE_INTERFACE_BOOL content properties
bd82bb4 Clear the link information in ClearLinkMaps.
e987991 Make INTERFACE determined properties readable in generator expressions.
d9afacc Exit early if we find an inconsistent property.
1800f70 Populate the link information cache before checking dependent properties.
With similar reasoning to the parent commit, as downstreams, we can't
determine what $<CONFIG> generator expressions would be appropriate.
Upstream would have populated the INTERFACE_INCLUDE_DIRECTORIES with
config-specific generator expressions, possibly appropriate for
their DEBUG_CONFIGURATIONS. In theory, if we would add include
directories for a DEBUG intent, we would have to match the upstream
configurations for that.
Rather than attempting to discover the appropriate configurations
at this time, simplify the feature instead. The use of IMPORTED targets
with these commands could still be added in the future if targets
would export their DEBUG_CONFIGURATIONS somehow.
This reverts commit 9cfe4f1b76.
It turns out that correctly adding the content to
the IMPORTED_LINK_INTERFACE_LIBARIES_<CONFIG> of an upstream target
from the buildsystem of a downstream project is not simple.
If upstream had added the INTERFACE content, the config-specific
properties would be determined by the DEBUG_CONFIGURATIONS of
upstream.
As downstream, we don't have any information about what
the DEBUG_CONFIGURATIONS of upstream were, so we can't determine
which configuration-specific properties to populate. The best we can do
is add it to all of them or add it to the ones downstream considers to
be DEBUG_CONFIGURATIONS, neither of which is a good solution.
So, removing the porcelain API for that is the best approach. A human
can still determine which properties to populate and use
the set_property API to populate the desired properies.
Another solution to this would be for upstream targets to publish
what they consider DEBUG_CONFIGURATIONS, but that can be added in
a future release.
Otherwise, we get a separate IncludeDirectoriesEntry for each include,
and that causes unnecessary and confusing splitting in the output when
debugging the INCLUDE_DIRECTORIES property.
This new expression allows checking how a policy was set when a target
was created. That information is only recorded for a subset of policies,
so a whitelist is used.
Set CMAKE_SUPPRESS_REGENERATION in the Lib1 and Lib2 projects so that
their .vcxproj files do not contain references to ZERO_CHECK. Such
references do not make sense when using the files in another .sln file.
This does not reduce the effectiveness of the test because real projects
that use include_external_msproject will have their own .vcxproj files not
generated by CMake anyway.
The ExternalProject_Add DEPENDS option adds two types of dependencies.
It adds a target-level build order dependency between the external
project target and the named targets. It also adds a file-level
dependency on the "done" stamp file of the named external project
targets. Targets not created by ExternalProject_Add have no such stamp
file and no _EP_STAMP_DIR property. Prior to commit d14c0243 (Refactor
repeated code into function, 2012-04-26) we unconditionally accepted an
empty stamp dir and generated a dependency on a non-existent file.
After that commit we generate an error that no stamp dir is set.
Skip the file-level dependency when the named dependency is not an
external project target in order to allow this use case. Teach the
ExternalProject test to cover the case.
1d74ba2 Test evaluation target via export for generator expressions
522bdac Export the INTERFACE_PIC property.
4ee872c Make the BUILD_INTERFACE of export()ed targets work.
1d47cd9 Add a test for the interfaces in targets exported from the build tree.
6c828f9 Move the exported check for file existence.
cfd4f0a Move the exported check for dependencies of targets
d8fe1fc Only generate one check per missing target.
f623d37 Don't write a comment in the export file without the code.
b279f2b Strip consecutive semicolons when preprocessing genex strings.
The Config and IMPORTED_ variants may also contain generator
expressions.
If 'the implementation is the interface', then the result of
evaluating the expressions at generate time is used to populate
the IMPORTED_LINK_INTERFACE_LIBRARIES property.
1) In the case of non-static libraries, this is fine because the
user still has the option to populate the LINK_INTERFACE_LIBRARIES
with generator expressions if that is what is wanted.
2) In the case of static libraries, this prevents a footgun,
enforcing that the interface and the implementation are really
the same.
Otherwise, the LINK_LIBRARIES could contain a generator
expression which is evaluated with a different context at build
time, and when used as an imported target. That would mean that the
result of evaluating the INTERFACE_LINK_LIBRARIES property for
a static library would not necessarily be the 'link implementation'.
For example:
add_library(libone STATIC libone.cpp)
add_library(libtwo STATIC libtwo.cpp)
add_library(libthree STATIC libthree.cpp)
target_link_libraries(libtwo
$<$<STREQUAL:$<TARGET_PROPERTY:TYPE>,STATIC_LIBRARY>:libone>)
target_link_libraries(libthree libtwo)
If the LINK_LIBRARIES content was simply copied to the
IMPORTED_LINK_INTERFACE_LIBRARIES, then libthree links to libone, but
executables linking to libthree will not link to libone.
3) As the 'implementation is the interface' concept is to be
deprecated in the future anyway, this should be fine.
Make a C executable instead of attempting to make a C++ static
library (and not really succeeding). This was introduced in
commit 894f52f3 (Handle INTERFACE properties transitively for
includes and defines., 2012-09-23).
3581b96 Process the INTERFACE_PIC property from linked dependencies
042ecf0 Add API to calculate link-interface-dependent bool properties or error.
bf5ece5 Keep track of properties used to determine linker libraries.
This allows a dependee to inform a target that it should have its
POSITION_INDEPENDENT_CODE property set to ON, or OFF. The value of
the POSITION_INDEPENDENT_CODE property, if set, must be consistent
with any INTERFACE_POSITION_INDEPENDENT_CODE properties on dependees.
Add a test covering the consistency checks on platforms where they run.
This makes
set(CMAKE_BUILD_INTERFACE_INCLUDES ON)
add the equivalent of
set_property(TARGET tgt APPEND PROPERTY
INTERFACE_INCLUDE_DIRECTORIES
$<BUILD_INTERFACE:${CMAKE_CURRENT_SOURCE_DIR};${CMAKE_CURRENT_BINARY_DIR}>
)
to every target.
If the headers are in CMAKE_CURRENT_SOURCE_DIR, and the generated headers
are in CMAKE_CURRENT_BINARY_DIR, this is a convenient way to build a target
bar, which depends on foo, just by using target_link_libraries() and adding
the INTERFACE_INCLUDE_DIRECTORIES to the INCLUDE_DIRECTORIES of the target
being linked. There will be more-convenient porcelain API to consume the
property in the future.
This makes it possible to use:
target_link_libraries(foo LINK_INTERFACE_LIBRARIES bar)
where foo is an IMPORTED target. Other tll() signatures are not
allowed.
Previously we kept direct link dependencies in OriginalLinkLibraries.
The property exposes the information in the CMake language through the
get/set_property commands. We preserve the OriginalLinkLibraries value
internally to support old APIs like that for CMP0003's OLD behavior, but
the property is now authoritative. This follows up from commit d5cf644a
(Split link information processing into two steps, 2012-11-01).
This will be used later to populate the link interface properties when
exporting targets, and will later allow use of generator expressions
when linking to libraries with target_link_libraries.
Also make targets depend on the (config-specific) union of dependencies.
CMake now allows linking to dependencies or not depending on the config.
However, generated build systems are not all capable of processing
config-specific dependencies, so the targets depend on the union of
dependencies for all configs.
cc676c3 OS X: Detect implicit linker framework search paths
2dd67c7 OS X: Detect implicit link directories on modern toolchains
ba58d0c OS X: Link with all framework search paths, not just the last
894f52f Handle INTERFACE properties transitively for includes and defines.
f5b1980 Populate the ExportedTargets member early in GenerateMainFile
c67b812 Make cycles in target properties ignored, not an error.
d0f950f Use mapped config properties to evaluate $<CONFIG>
26def17 Make all relevant targets available in the genex context.
0c657dc Add API to populate INTERFACE properties in exported targets.
e04f737 Add API to extract target names from a genex string.
b0c8f73 Add the TARGET_NAME generator expression.
77475fe Allow generator expressions to require literals.
b2f1700 GenEx: Add expressions to specify build- or install-only values
This means for example, that consumers can use:
target_link_libraries(foo ${QT_QTGUI_LIBRARIES})
instead of also needing to specify all 'public' dependencies:
target_link_libraries(foo ${QT_QTGUI_LIBRARIES} ${QT_QTCORE_LIBRARIES} )
when using the IMPORTED targets. Also populate the
IMPORTED_LINK_DEPENDENT_LIBRARIES property so CMake can help the linker
find shared library dependencies.
This is for specifying INCLUDE_DIRECTORIES relevant to the build-location
or the install location for example:
set_property(TARGET foo PROPERTY
INTERFACE_INCLUDE_DIRECTORIES
"$<BUILD_INTERFACE:${CMAKE_CURRENT_BINARY_DIR};${CMAKE_CURRENT_SOURCE_DIR}>"
"$<INSTALL_INTERFACE:${CMAKE_INSTALL_PREFIX}/include>"
)
A 'bar' target can then use:
set_property(TARGET bar PROPERTY
INCLUDE_DIRECTORIES
"$<TARGET_PROPERTY:foo,INTERFACE_INCLUDE_DIRECTORIES>"
)
and it will work whether foo is in the same project, or an imported target
from an installation location, or an imported target from a build location
generated by the export() command.
Because the generator expressions are only evaluated at build-time, these
new expressions are equivalent to the ZeroNode and OneNode.
The GeneratorExpression test is split into parts. Some shells can't run
the custom command as it is getting too long.
0941d62 Add a way to print the origins of used include directories.
18a3195 Keep track of INCLUDE_DIRECTORIES as a vector of structs.
76ea420 Use cmsys::auto_ptr to manage cmCompiledGeneratorExpressions
Resolve this warning:
".../Tests/CMakeCommands/target_link_libraries/depB.cpp", line 8: warning:
variable "a" was declared but never referenced
DepA a;
^
Add a test that verifies that when ctest -j 4 is called, at most, 4 tests
are executed at any one time.
The test works by running the same script as each of 100 tests. And then setting
up test properties for DEPENDS, RUN_SERIAL, PROCESSORS and COST in order to get
the tests to run in a semi-deterministic ordering, even in parallel. The script
writes a file, sleeps for a bit, and then deletes the file. In the meantime, it
counts files that currently exist, and emits output that triggers a test failure
if the count of files is ever greater than 4.
Prior to the commit that fixed bug #12904, this would result in a failed test
because the output of some of the tests would indicate that more than 4 tests
were running simultaneously.
Now that this issue is resolved, this test will help guarantee that it stays
resolved moving forward.
Previously we hard-coded a list of implicit framework directories but
did not account for CMAKE_OSX_SYSROOT or for changes to the list across
OS X versions. Instead we should automatically detect the framework
directories for the active toolchain.
The parent commit added the "-Wl,-v" option to ask "ld" to print its
implicit directories. It displays a block such as:
Framework search paths:
/...
Parse this block to extract the list of framework directories.
Detection may fail on toolchains that do not list their framework
directories, such as older OS X linkers. Always treat the paths
<sdk>/Library/Frameworks
<sdk>/System/Library/Frameworks
<sdk>/Network/Library/Frameworks # Older OS X only
/System/Library/Frameworks
as implicit. Note that /System/Library/Frameworks should always be
considered implicit so that frameworks CMake finds there will not
override the SDK copies.
We detect the implicit link directories for the toolchain by adding a
flag to get verbose output from the compiler front-end while linking the
ABI detection binary. Newer OS X toolchains based on Clang do not add
the implicit link directories with -L options to their internal
invocation of "ld". Instead they use a linker that comes with the
toolchain and is already configured with the proper directories.
Add the "-Wl,-v" option to ask "ld" to print its implicit directories.
It displays them in a block such as:
Library search paths:
/...
Parse this block to extract the implicit link directories.
While at it, remove the checks introduced by commit efaf335b (Skip
implicit link information on Xcode, 2009-07-23) and commit 5195a664
(Skip implicit link info for multiple OS X archs, 2009-09-22). Discard
the non-system link directories added by Xcode. Discard all detected
implicit libraries in the multi-architecture case but keep the
directories. The directories are still useful without the libraries
just to suppress addition of explicit -L options for them.
Historically CMake has always expanded ${} variable references in the
values given to include_directories(), link_directories(), and
link_libraries(). This has been unnecessary since general ${}
evaluation syntax was added to the language a LONG time ago, but has
remained for compatibility with VERY early CMake versions.
For a long time the re-expansion was a lightweight operation because it
was only processed once at the directory level and the fast-path of
cmMakefile::ExpandVariablesInString was usually taken because values did
not have any '$' in them. Then commit d899eb71 (Call
ExpandVariablesInString for each target's INCLUDE_DIRECTORIES,
2012-02-22) made the operation a bit heavier because the expansion is
now needed on a per-target basis. In the future we will support
generator expressions in INCLUDE_DIRECTORIES with $<> syntax, so the
fast-path in cmMakefile::ExpandVariablesInString will no longer be taken
and re-expansion will be very expensive.
Add policy CMP0019 to skip the re-expansion altogether in NEW behavior.
In OLD behavior perform the expansion but improve the fast-path
heuristic to match ${} but not $<>. If the policy is not set then warn
if expansion actually does anything. We expect this to be encountered
very rarely in practice.
This new CPack generator produces an *.msi installer file.
Requires having the WiX Toolset installed in order to work
properly.
Download the WiX Toolset installer "WiX36.exe" here:
http://wix.codeplex.com/releases/view/93929
These tests were not running properly on Visual Studio or
Xcode dashboards before this commit because of the "Debug"
or "Release" sub-directory. The scripts already have
CMAKE_CPACK_COMMAND since the correct CMake executable is
used to run the scripts, so just use that, rather than
passing down an incorrect path to the CPack executable.
a41d3a4 ExternalProjectUpdateTest: Only support Git 1.6.5 and greater.
de760c1 ExternalProject: Verify when a fetch occurs during update test.
0a34433 ExternalProject: Make sure the ExternalProjectUpdate setup is available.
9b66c8f ExternalProject: Always do a git fetch for a remote ref.
2619f4d ExternalProject: Add tests for UPDATE_COMMAND.
378aa12 ExternalProject: Do smoke tests for Git Tutorial builds.
d075829 ExternalProject: Only run 'git fetch' when required.
Brad King
Zack Galbreath
Stephen Kelly
Nils Gladitz
Daniele E. Domenichelli
Clinton Stimpson
Pedro Navarro
Adrien Destugues
Patrick Reynolds
Ben Boeckel
David Cole
Rolf Eike Beer
Patrick Gansterer
Robert Maynard
Ben Boeckel
Fredrik Axelsson
Jonas Andersen
Modestas Vainius
John Farrier
Andreas Mohr
Petr Kmoch
Paul Kunysch
Jean-Christophe Fillion-Robin
James Bigler
Michael Tänzer
Alex Neundorf
Yury G. Kudryashov
David Cole
Nils Gladitz