Re-run if the input file changes or if the output file is removed.
This only works with the Makefile generators currently. The limitation
of the Ninja generator is tracked as issue #15256. The IDE
generators will need larger refactoring as they currently rely on
being able to determine the depends and output files at the start of
generate-time, which is too early for the file(GENERATE) case.
67bd514a Ninja: Refactor restat to be a string internally
ef42e57d Ninja: Use a TARGET_FILE variable to hold the link output file
592644c4 Tests/BuildDepends: Drop unneeded help for Ninja
2d75d7e5 Help: Add notes for topic 'console-pool'
f42d86f0 Ninja: Implement USES_TERMINAL using the console pool if available
f281ae01 Ninja: Remove unused declaration
d5eae556 Ninja: factor out the test for console pool support
4d1fedf4 Give the interactive cache editor the USES_TERMINAL property
fe5d6e8c Add USES_TERMINAL option for custom commands
ad6ee426 Rename doing_verbatim to doing_nothing
The external project's build process may generate byproducts on which
other rules in the driving project's build later depend. Provide a way
for the driving project to specify what byproducts it expects to be made
available by the custom commands that drive the external project.
A common idiom in CMake-based build systems is to have custom commands
that generate files not listed explicitly as outputs so that these
files do not have to be newer than the inputs. The file modification
times of such "byproducts" are updated only when their content changes.
Then other build rules can depend on the byproducts explicitly so that
their dependents rebuild when the content of the original byproducts
really does change.
This "undeclared byproduct" approach is necessary for Makefile, VS, and
Xcode build tools because if a byproduct were listed as an output of a
rule then the rule would always rerun when the input is newer than the
byproduct but the byproduct may never be updated.
Ninja solves this problem by offering a 'restat' feature to check
whether an output was really modified after running a rule and tracking
the fact that it is up to date separately from its timestamp. However,
Ninja also stats all dependencies up front and will only restat files
that are listed as outputs of rules with the 'restat' option enabled.
Therefore an undeclared byproduct that does not exist at the start of
the build will be considered missing and the build will fail even if
other dependencies would cause the byproduct to be available before its
dependents build.
CMake works around this limitation by adding 'phony' build rules for
custom command dependencies in the build tree that do not have any
explicit specification of what produces them. This is not optimal
because it prevents Ninja from reporting an error when an input to a
rule really is missing. A better approach is to allow projects to
explicitly specify the byproducts of their custom commands so that no
phony rules are needed for them. In order to work with the non-Ninja
generators, the byproducts must be known separately from the outputs.
Add a new "BYPRODUCTS" option to the add_custom_command and
add_custom_target commands to specify byproducts explicitly. Teach the
Ninja generator to specify byproducts as outputs of the custom commands.
In the case of POST_BUILD, PRE_LINK, and PRE_BUILD events on targets
that link, the byproducts must be specified as outputs of the link rule
that runs the commands. Activate 'restat' for such rules so that Ninja
knows it needs to check the byproducts, but not for link rules that have
no byproducts.
Teach the add_custom_command and add_custom_target commands a new
USES_TERMINAL option. Use it to tell the generator to give the command
direct access to the terminal if possible.
string SUBSTRING command now ignores length if it points
past end of string and uses end of string instead.
String SUBSTRING tests now cover more corner cases.
3c497f11 Help: Add notes for topic 'ExternalProject_UPDATE_DISCONNECTED'
aba5cec6 ExternalProject: Add unit tests for UPDATE_DISCONNECTED
3f606fa7 ExternalProject: Add UPDATE_DISCONNECTED option
c0b749cf ExternalProject: Always add a command to a step
The CPackComponentsForAll-*, GeneratorExpression, and
TestsWorkingDirectory tests all build binaries that they later
need to run or package for the tested configuration. Tell the
'ctest --build-and-test' call to use the same configuration
for driving the build process.
The evaluation files must be known before cmTargetTraceDependencies
attempts to find them, but we must actually generate the files after
cmTargetTraceDependencies, as that can add to target SOURCES. The
limitation is that the generated output name must not depend on the
SOURCES of a target if the generated file is used by that target.
Mark the output files as GENERATED so that trace dependencies does
not expect them to already exist in the filesystem.
Move the invokation of ForceLinkerLanguage in the Generate logic
to after the generated file names are known. ForceLinkerLanguage
tries to determine the sources of a target (in order to determine
an already-known language) and otherwise fails to get information
about the generated file.
Test that the output of file(GENERATE) can be used as a target source
file and that accessing the target SOURCES in the name of the output
file is an error. Accessing the TARGET_OBJECTS would be a similar
error if it was legal to use that generator expression in this
context. That is not currently possible and is a different error
condition, so test the current error output as a reminder to change
the expected output if that becomes possible in the future. Test
that generated rule files resulting from cmTargetTraceDependencies
appear in the SOURCES generated in the output file.
Since commit v3.1.0-rc1~227^2~1 (De-duplicate shared library targets in
generated link lines, 2014-07-30) we de-duplicate shared library targets
on the link line. However, some toolchains will fail linking if an
executable is linking to a shared library that is not used directly and
a static library that depends on the shared one. The linker may not
keep the reference to the shared library the first time and then the
symbols needed by the static library may not be found.
Fix this by reversing the direction of the for loop that removes the
duplicate shared libraries, in order to ensure that the last occurrence
of the library is left instead of the first one.
Extend Tests/Dependency with a case covering this behavior. Create an
executable that links to a shared library and a static library but only
needs the shared library as a dependency of the static library.
Co-Author: Brad King <brad.king@kitware.com>
c02c747b Tests: Update expected CTestTestFailedSubmit output
a427ed0c curl: Skip sanity check that triggers Clang warning
17b24d55 curl: Disable warnings to avoid changing 3rd party code
4c3bd340 curl: Skip check for inet_pton on Windows
54cb23c6 curl: Restore installation of OpenSSL DLLs
c50f0327 curl: Restore CURL_CA_BUNDLE option
681693c9 curl: Restore CMake-specific zlib selection code
10d80b68 curl: Restore CMake-specific test and install code
19593042 curl: Configure build to work within CMake
cf54aebb curl: Fix curl.h inclusion of curlbuild.h from CMake sources
c17e3207 curl: Use arch-aware CHECK_TYPE_SIZE results
1f7cb7e2 curl: Fix detection of headers with dependencies
b18c9044 curl: Drop inclusion of .rc file for static lib
860f0a2d curl: Select file APIs on Windows
5a3b55ed curl: Do not use 'dl' on HP-UX
59242702 curl: Simplify if() conditions on check result variables
...
b6b37e30 Makefile: Add assembly and preprocessed targets for Fortran
0842b084 Makefile: Refactor checks for lang-specific targets and export compile cmds
1531df2b configure_file: Warn about unknown arguments
4abbb140 Qt4: Fix configure_file call to use COPYONLY, not COPY_ONLY
bd7ba8e2 KWSys: Fix configure_file call to use COPYONLY, not COPY_ONLY
e9282782 Help: Fix configure_file call to use COPYONLY, not COPY_ONLY
Extend the RunCMake.configure_file test with a case covering possible
common typos of the COPYONLY option.
Reported-by: Iosif Neitzke <iosif.neitzke@gmail.com>
609037f4 ExternalProject: Add unit tests for CMAKE_CACHE_DEFAULT_ARGS
98cdb658 ExternalProject: Add CMAKE_CACHE_DEFAULT_ARGS arguments
36cf8a1e Tests/Tutorial: Fix when USE_MYMATH is OFF
This argument allows to set default arguments that are written in the
initial cache file, but that are not forced, and therefore allows the
user to change these values later (CMAKE_ARGS and CMAKE_CACHE_ARGS
always overwrite the values).
Also add some documentation to explain the differences between these 3
arguments.
Extend ExternalProjectLocal test to cover CMAKE_CACHE_DEFAULT_ARGS.
Unit tests for the square root of "-25" currently fail when USE_MYMATH
is disabled. The "mysqrt" method in the tutorials, returns "0" for a
negative value, while "sqrt" returns "NaN", and therefore the output is
not accepted by the test.
This patch checks if the number is negative and eventually returns "0"
before calling "sqrt" or "mysqrt" to fix this issue.
Printing a NaN might cause issues with the string catched by the tests
on some platform. Therefore assume that "0" is correct and "fix" the
USE_MYMATH=OFF version by checking if the number is negative and
eventually returning "0" before calling "sqrt" or "mysqrt".
Some compilers (e.g. MSVC) can have a different encoding than the build tool.
Changing the test to not use a full include path written to a header file by cmake.
6e1c359f QtAutogen: Regenerate qrc files if their input changes (#15074)
a2995318 QtAutogen: Expand rccfiles into a vector early in the autogen process.
506151af QtAutogen: Extract a GetRccExecutable method.
d1b62185 Merge branch 'parent-scope-tests' into variable-pull-failure
5f414cef Revert "cmDefinitions: Don't store parent lookups"
e0c0b1ac test: add a test for PARENT_SCOPE with multiple scopes
064c415d test: add test for PARENT_SCOPE behavior
Get dependencies from the output of ``rcc --list`` if using
Qt 5. Otherwise process the file in the same way as the
qt4_add_resources macro.
This does not work for RCC files which are generated.
The cmake_autogen build step is implemented as a PRE_BUILD step
of the target currently if possible, rather than a standalone
custom target. This is to keep the number of (synthesized)
custom targets that appear in the UI low, but in some cases
it is necessary to fall back to a full custom target.
Fall back to a full custom target for the VS builds if autorcc
is used.
* parent-scope-tests:
test: add a test for PARENT_SCOPE with multiple scopes
test: add test for PARENT_SCOPE behavior
Conflicts:
Tests/RunCMake/set/RunCMakeTest.cmake
Enable per-component description and summary setting through
CPACK_RPM_<component>_PACKAGE_DESCRIPTION,
CPACK_COMPONENT_<compName>_DESCRIPTION and
CPACK_RPM_<component>_PACKAGE_SUMMARY variables.
Extend the CPackComponentsForAll test to cover these.
In the case of:
-DCACHE_VARS=-DEXTERNAL_PROJECT_CMAKE_ARG:BOOL=TRUE
the variable is parsed out as:
CACHE_VARS=-DEXTERNAL_PROJECT_CMAKE_ARG
because the parser allows '=' in the variable name. Disallow such a name
on the command line.
When testing CMAKE_<LANG>_COMPILER_ID values, do not explicitly
dereference or quote the variable. We want if() to auto-dereference the
variable and not its value. Also replace MATCHES with STREQUAL where
equivalent.
Changes in commit b9aa5041 (cmLocalGenerator: Simplify GetIncludeFlags
output formatting, 2014-03-04) caused Windows Resource Compiler include
directories to be computed as relative paths in the Ninja generator.
This breaks the cmcldeps handling of include paths. The reason for the
regression is that several cmLocalGenerator::GetIncludeFlags callers
treated the fourth "bool forResponseFile" argument as if it controlled
whether include directories were a full path. It actually did control
that by accident until the above commit.
Add an explicit "bool forceFullPaths" argument to GetIncludeFlags
and thread the value through ConvertToIncludeReference as needed.
Update GetIncludeFlags call sites that really wanted to control the
forResponseFile setting to be aware of the new argument. Extend the
VSResource test to cover this case.
631fadea Help: Add notes for topic 'fix-OSX-bundle-rpaths-and-Qt5'
50e261dd OSX: Warn when attempting to change runtime paths on OS X 10.5
9b98fd52 cmake-gui: Make sure we bundle Qt5 Cocoa platform plugin
83a06bb4 BundleUtilities: Framework codesign Resources/Info.plist & Current
f7df82ac BundleUtilities: Resolve & replace @rpath placeholders
14bc686f GetPrerequisites: Make sure dyld placeholders are prefixes
6c313797 BundleUtilities: Use find on UNIX for fast executable lookup
Even though 10.5 supports @rpath, the support is not complete
enough for CMake. For instance, install_name_tool doesn't support
adding and removing rpaths.
Also modifying BundleUtilities test to remove an undesirable cmake
generated runtime path. The intent was to build with the install
rpath as is done with the other cases in this test.
ba907f7d FPHSA: fix when requested or found version is exactly 0
4f9bf446 FPHSA: when EXACT version match is requested only compare the components given
e0e75a72 Help: Add notes for topic 'ctest-memcheck-sanitizers'
7345a1f7 tests: Add a test for ctest_memcheck MemorySanitizer
0c6330da ctest_memcheck: Add support for MemorySanitizer msan
9ba8bf12 tests: add a test for ctest_memcheck UndefinedBehaviorSanitizer
816c100a ctest_memcheck: Add support for UndefinedBehaviorSanitizer ubsan
b67ef537 ctest_memcheck: Order sanitizer type code consistently
f48a2968 Tests: Organize CTestTestMemcheck inner test code
Given that you have a foobar that identifies itself as 1.2.3 from now on a
find_package(foobar 1.2 EXACT)
will succeed, as 1.2.3 will now be considered as being 1.2. Until now this was
only the case for version 1.2.0.
f25e431d tests: set sanitizer options properly
f0661bf3 tests: fix copy/paste from tsan -> asan comments
ca9cc25c ctest: add support for additional sanitizer options
0b9ffffc ctest: update documentation for CTEST_MEMORYCHECK_TYPE
df84281d Help: Add notes for topic 'vs-nsight-tegra-generator'
69e198dc VS: Generate Nsight Tegra project revision number
5365c9ac VS: Map Nsight Tegra file types in .vcxproj files
178f56a5 VS: Fix Tegra-Android platform linking of libraries by name
7115702f Tests: Add test for VS Nsight Tegra generator support
a6289499 VS: Generate ANDROID_GUI executables as app packages
c12e4699 Add 'ANDROID_API' target property to set Android Target API
9a4df52a Add 'ANDROID_GUI' target property to mark Android applications
16569abf cmTarget: Track internally whether platform is Android
ef0fd4f0 VS: Teach vcxproj generation about the Tegra-Android platform
d09b60f5 VS: Detect compiler id of Nsight Tegra-Android toolchains
2f071466 VS: Teach VS >= 10 to recognize CMAKE_SYSTEM_NAME 'Android'
Nsight Tegra Visual Studio Edition handles prefixing of library names
with '-l' automatically, so teach the generator not to do so.
Reported-by: Mourad Boufarguine <mourad@boufarguine.name>
Create a VSNsightTegra test based on the "two-libs" example from the
Android NDK. Add it whenever testing on a machine with VS 11 or 12
and the NVIDIA Nsight Tegra Visual Studio Edition installed. Exclude
it when there is a space in the path to the source or build tree because
the tools do not seem to support it.
This version of the Intel Fortran plugin to Visual Studio says:
please make sure that $(OutDir), $(TargetName) and $(TargetExt)
property values match the value specified in %(Link.OutputFile)
We must set TargetName and TargetExt in addition to the existing
setting for OutputDirectory. The settings do not appear to hurt
older versions of Intel Fortran, so set them unconditionally.
Extend the FortranOnly test to cover a corresponding use case by
using the OUTPUT_NAME target property.
Inspired-by: Ian Harvey <Ian.Harvey@megms.com.au>
c655f0c4 VS: Drop GenerateManifest from .vcxproj files for non-MS tools
227a3367 VS: Use case-insensitive check for hlsl,jpg,png,xml file extensions
4a24015a Tests: Always detect VS and SDK availability on Windows
Error message from cygwin's curl (using `--system-libs`) in
CTestTestFailedSubmit-ftp was:
Failed to connect to port 21: Connection timed out
^^^
Update our regex to match this.
Unlike with Unix Makefiles generator modifying compiler paths was not
protected with Ninja generator. It was possible to modify them in the
cache without the expected effect on the generated solution. Also
activate corresponding tests with Ninja.
be6a555d Tests: Test setting a generator platform in a toolchain file
d506fee8 Tests: Use -A option to pass generator platform selection
11c9ddd6 ExternalProject: Use -A option to pass generator platform
29bd843e CTest: Use -A option to pass generator platform selection
eb7d8156 cmake: Add -A option to specify a generator platform
858d5a0b Fix if() checks of CMAKE_SYSTEM_NAME on Cygwin
e177e7af FPHSA: Avoid if() dereferencing of quoted variable
425acc52 cmcurl: Use if(DEFINED) to simplify conditions
cede5cbd libarchive: Avoid depending on if() to dereference a quoted variable
2d97178b FindGTK2: Avoid depending on if() to dereference a quoted variable
0b12815d Modules/Test*.cmake: Use if(DEFINED) to simplify conditions
188a1f23 If: Introduce policy CMP0054 - don't dereference quoted variables in if()
b900c1cc If: Extract cmConditionEvaluator from if() implementation
Define the 'cmake -A' option to set CMAKE_GENERATOR_PLATFORM
without having to spell out the whole variable name. We choose
the name '-A' for "platform" because '-P' is already taken, and
in the common use case the "platform" is actually an architecture
(e.g. x64).
Teach the RunCMake test infrastructure to use -A to pass the generator
platform. Extend the RunCMake.GeneratorPlatform test with a case to
verify that the -A option cannot be repeated.
The CMAKE_SYSTEM_NAME is "CYGWIN", but we also define a variable
named "CYGWIN" to "1". Avoid allowing if() to expand the "CYGWIN"
string as a variable.
For VS generator names that do not specify the platform name, read
CMAKE_GENERATOR_PLATFORM to get it.
Extend the RunCMake.GeneratorPlatform test with a case covering
use of the x64 platform when the test generator is a Visual Studio
generator whose name does not specify a platform.
Reject the option by default. It will be implemented on a per-generator
basis. Pass the setting into try_compile project generation. Add cache
entry CMAKE_GENERATOR_PLATFORM and associated variable documentation to
hold the value persistently.
Add a RunCMake.GeneratorPlatform test to cover basic use cases for the
option. Verify that CMAKE_GENERATOR_PLATFORM is empty by default, and
that it is rejected when the generator does not support a user setting.
A few different regular expressions were being used in various
places to extract info strings from binaries. This uses a
consistent regex amongst all of them now. This also fixes the
broken ABI detection for Cray compilers.
39fefde2 VS: Add test case for Windows Phone and Windows Store
89da8465 MSVC: Define 'WIN32' for Windows Store and Windows Phone
ed7f085f Help: Add notes for topic 'vs-windows-apps'
dd11ae8f VS: Do not compile C sources as WinRT (#15100)
b8e40538 VS: Mark Windows Phone and Store targets as App Containers
0432f062 VS: Always ignore ole32 on Windows Phone 8.0
e6ff2f8b VS: Generate Windows Metadata for WinRT components
ee48f4c7 VS: Generate Windows Phone and Windows Store projects as Unicode
cb1aceed VS: Add VS_WINRT_COMPONENT property to enable CompileAsWinRT
401269e4 VS: Handle .pfx files explicitly in generator
23782171 VS: Handle AppxManifest sources explicitly in generator
bc373c6d VS: Set Window Phone/Store app type in CMake-generated targets
d89b2889 VS: Mark CMake-generated targets as Utility in .vcxproj files
03ad8f28 CMakeDetermineCompilerABI: Link with standard libraries on MSVC
cbd1d42b Help: Add notes for topic 'vs-masm'
0f8522a6 VS: Add MASM support to VS 8 and 9 (#8170, #14984)
a43f4400 VS: Move internal MasmEnabled member up to VS 7 generator
df3b007d VS: Add test for MASM support
e8727449 VS: Populate MASM tool build settings in .vcxproj files
0271a5f9 VS: Manually fix MASM flag table entries
1d662e48 VS: Generate MASM flag tables from MSBuild tool files
4f6940df VS: Fix ASM_MASM support in VS >= 10
d7866c52 ASM_MASM: Fix selection of ml64
0374abdb ASM_MASM: Add preprocessor definitions to compile lines
5b0a46e1 ASM_MASM: Do not require compiler to be a full path
802dbe52 cmLocalVisualStudio7Generator: Rename local 'lang' var
653529ce CTest: Allow / to be in the build name, and be consistent with the build name
39b5df2f ctest_update: Add CTEST_UPDATE_VERSION_ONLY option to only note the version
This allows ctest_update to get the current version without actually
changing the repository. This is useful when using Jenkins or an
external project to update the source to a specific version, but you
still want the current version to show up in CDash.
Copy the CheckCSourceCompiles module and port it to Fortran.
Extend the FortranOnly test to try using the new module.
Suggested-by: Nicolas Bock <nicolasbock@gmail.com>
The lexer changes in commit v3.0.0-rc1~495^2 (Add Lua-style long
brackets and long comments to CMake language, 2013-08-06) accidentally
left out matching '[' as a single character in an unquoted argument.
Add a lexer rule to match it and extend the RunCMake.Syntax test to
cover this case.
The current file parser for a MUMPS routine uses a period "." as the
one of the signals that a line of MUMPS code is executable. This is not
a correct assumption. Add the period to the list of characters that CTest
will not consider the start of a line of code.
Update the test routine to have an entry point with code to match the scenario
mentioned above.
Teach the Makefile generators to escape '#' characters on the right hand
side of variable assignments in flags.make. This is needed for flags
like '-Wno-error=#warnings'. Otherwise the make tool treats them as
comments and leaves them out of the _FLAGS variable value.
Add a case to the CompileOptions test covering '#' in a COMPILE_OPTIONS
value, at least on compilers where it is known to be supported.
When $<TARGET_PROPERTY> names a build property like COMPILE_DEFINITIONS
but not the usage requirement (INTERFACE_) version of it, the value
should be that used to build the target. It should not be influenced by
a dependent 'head' target like usage requirements are.
Extend the CompileDefinitions test with a case covering the corrected
behavior.
Reviewed-by: Stephen Kelly <steveire@gmail.com>
After calls to ProcessSourceItemCMP0049, check for an empty return
string to detect a failure instead of trusting GetErrorOccuredFlag.
The latter could have been left from a preceding non-fatal error.
Extend the RunCMake.Configure test to cover a case that exposed this
problem.
Since the Sanitizers write out one log file per process, a single
test might have more than one log file. This commit allows ctest
to read all of the log files found for a particual test.
When running CMake under Leak or Address Sanitizer tools, the fake reporting
would get picked up by the outer CMake and reported as leaks and address
failures on the CMake dashboard. This commit makes sure the test only
reports simulated errors when asked to.
These tests cover the OLD behavior of some policies. Set them to
OLD to avoid warnings in the test output. Leave a comment that
explains why this is done here but not recommended in general.
The generator name is "Xcode", not "XCode". Fix this typo. Explicitly
exclude the SubDirSpaces test on Xcode because it does not work. Also
tell the RunCMake.File_Generate test when Xcode is not multi-config so
it can exlcude the OutputConflict case.
Inspired-by: Daniele E. Domenichelli <daniele.domenichelli@iit.it>
Callers of cmTarget::GetLinkImplementationClosure are interested in the
set of targets whose interface properties propagate to the current
target. This excludes targets guarded by $<LINK_ONLY>.
Teach the CompatibleInterface test to cover suppression of interface
compatibility tests with $<LINK_ONLY>. Although this is not recommended
in practice, it is a way of covering the above behavior.
Previously this generator expression was used internally by the
target_link_libraries command to honor private linking requirements of
static libraries in their INTERFACE_LINK_LIBRARIES. Remove the check
that limits $<LINK_ONLY> to this use case to make it available for
project code to use too.
This adds support for memory and leak sanitizers. This is built into
clang and gcc 4.8 and new compilers. It is activated with a -f switch
during compile.
Fix cmTarget::GetSourceFiles to set EvaluateForBuildsystem on the
$<TARGET_PROPERTY:...,INTERFACE_SOURCES> generator expression so that
the $<TARGET_OBJECTS> generator expression is allowed within an
INTERFACE_SOURCES value.
Extend the InterfaceLibrary test to cover this case. Extend the
RunCMake.TargetObjects test to cover failure of $<TARGET_OBJECTS>
when used through $<TARGET_PROPERTY:...,INTERFACE_SOURCES> in a
non-buildsystem context.
This commit adds support for ThreadSanitizer to ctest. ThreadSanitizer
is part of the clang compiler and also gcc 4.8 and later. You have to
compile the code with special flags. Then your code gets the the
ThreadSanitizer ability built into it. To pass options to the
ThreadSanitizer you use an environment variable. This commit teaches
ctest to parse the output from ThreadSanitizer and send it to CDash.
Loosen this restriction on OBJECT libraries to allow source files of any
name to be generated by custom commands or listed for reference in IDE
projects so long as they would not affect linking of a normal library.
Update the rejection message to be more specific about the looser
restriction.
Extend the ObjectLibrary test to cover a ".cmake" file generated by a
custom command in an OBJECT library.
Use the AddInterfaceEntries helper to avoid duplication. In
TargetPropertyEntry, replace the TargetName string member with a
reference to the full cmLinkImplItem that produced the entry. This is
possible because the cmLinkImplItem is available in AddInterfaceEntries
(it was not available in GetIncludeDirectories). Having the full
cmLinkImplItem allows processIncludeDirectories to implement CMP0027 OLD
behavior without repeating the target name lookup.
Update the RunCMake.CompatibleInterface test DebugProperties case
expected output for the new order of the messages.
Move the subtests that test with local projects into their own test. The reason
is that on slower or crowded machines the test may reach the limit of 25
minutes and therefore fail while it would pass if it was given enough time.
The split is roughly 3:1 with regard to the execution time, with the new
ExternalProjectLocal test being the faster one.
Print the "timeout correctly killed" message using message(STATUS) so
that 'ctest -S' puts it in the same pipe as the rest of the test command
handler output. This ensures it shows up in the same order every time.
Commit v2.8.11~156^2~2 (Expand includes and defines transitively
in 'external' genexes., 2013-02-13) introduced a recursive loop
and a stack overflow during evaluation of a link implementation
which depends on a transitive property, such as
add_library(empty1 ...)
add_library(empty2 ...)
target_link_libraries(empty1
PRIVATE
$<$<STREQUAL:$<TARGET_PROPERTY:INCLUDE_DIRECTORIES>,/foo/bar>:empty2>
)
There is no use-case for code like that currently, but it should not
cause a stack overflow.
Avoid the recursion by reporting an error early if a case like this
is found.
A library or executable target that consists only of a reference to an
object library may have no sources to compile or custom commands to run.
The command in the target is the link (or archive) command. Add missing
order-only dependencies to link commands so that target ordering
dependencies are satisfied for it without depending on an intermediate
compilation rule.
Extend the ObjectLibrary test to cover this case.
Co-Author: Brad King <brad.king@kitware.com>
9998d78d Tests: Speed up RunCMake.include_directories test
6eee5d74 Tests: Drop broken and now unused RunCMake_TEST_FILE option
f0f15b93 Tests: Refactor RunCMake.include_directories to drop RunCMake_TEST_FILE
8707814e Tests: Refactor RunCMake.File_Generate to drop RunCMake_TEST_FILE
f0e298ad Help: Add notes for topic 'vs14-generator'
5c105140 Tests: Simplify LoadCommand tests
b1cbd577 FindBoost: Add -vc140 mangling for VS 14
bdc7d9c8 VS14: Fix Cl and Link flag tables as previous versions
d96b3f68 VS14: Generate flag tables from MSBuild v140 tool files
65624c39 VS14: Add Visual Studio 14 generator (#14982)
8635ac23 Tests/Preprocess: Remove unnecessary VS version tests
Remove unnecessary language initializations. Change the main
CMakeLists.txt project() call to specify NONE. Use enable_language(CXX)
instead of project() in cases that need it to avoid enabling C too.
We cannot use -DRunCMake_TEST=${RunCMake_TEST_FILE} because test cases
use project(${RunCMake_TEST}) and the project name cannot be a path to a
file. The parent and grandparent commits removed the only uses of the
option. Drop it now.
Drop out-of-place coverage of CheckFunctionExists module. The "printf"
symbol is not available on VS 14 without including the <stdio.h> header
to get a definition.
Call the generator "Visual Studio 14" without any year because this
version of VS does not provide a year in the product name.
Copy cmGlobalVisualStudio12Generator to cmGlobalVisualStudio14Generator
and update version numbers accordingly. Add the VS14 enumeration value.
Teach the platform module Windows-MSVC to set MSVC14 and document the
variable. Teach module InstallRequiredSystemLibraries to look for the VS
14 runtime libraries.
Teach tests CheckCompilerRelatedVariables, VSExternalInclude, and
RunCMake.GeneratorToolset to treat VS 14 as they do VS 10, 11, and 12.
Co-Author: Pawel Stopinski <diokhan@go2.pl>
f5c18c9c cmTarget: Drop GetDirectLinkLibraries methods
281eb3d8 cmTarget: Improve HaveBuildTreeRPATH implementation
d912220e cmTarget: Lookup targets in LinkInterface and LinkImplementation
edce4351 cmExportFileGenerator: Make SetImportLinkProperty a template
097be413 cmTarget: Add GetUtilityItems to get target ordering dependencies
4dad5fd2 cmTarget: Add cmLinkItem to refer to a target by name and pointer
a2723442 Fix scope of transitive target name lookups
069d60fe cmTarget: Add method to lookup other targets in a target's scope
47ab3ca6 cmTarget: Constify GetLinkImplementationClosure results
9f3ed029 cmTarget: Constify GetTransitivePropertyTargets results
6f0951af cmTarget: Drop 'head' target from GetImportInfo
0dc9e88d cmTarget: Remove 'head' argument from GetLinkImplementation
4ac72455 cmTarget: Drop 'head' argument from GetLinkClosure
bcdb7ff9 cmTarget: Remove 'head' argument from GetLinkerLanguage
bd9b667b cmComputeLinkInformation: Remove 'head' argument
06328dd5 cmTarget: Remove 'head' argument from GetLinkInformation
...
Since commit v2.8.12~436^2 (VS 10: Escape ; as %3B in preprocessor
definitions, 2013-04-11) the Tests/Preprocessor/CMakeLists.txt file no
longer uses the PP_VS1XX values, so stop setting them.
Installing large directories, e.g., the output of a doxygen run, prints
one line per file resulting in too much noise in the build output. Add
an option to the install(DIRECTORY) command to not print anything upon
make install.
Extend the RunCMake.install test with cases covering MESSAGE_NEVER
behavior of the install(DIRECTORY) command.
Suggested-by: Stefan Eilemann <Stefan.Eilemann@epfl.ch>
Create a variable to allow users to control which installation
messages are printed. In particular, provide a "LAZY" setting
that prints "Installing" messages but not "Up-to-date" messages.
This is desirable for incremental re-installations.
Suggested-by: J Decker <d3ck0r@gmail.com>
Create options "MESSAGE_ALWAYS", "MESSAGE_LAZY", and "MESSAGE_NEVER" to
specify whether to print the "Installing" and "Up-to-date" messages.
Extend the RunCMake.file test with cases covering these options.
Teach cmFileCopier::InstallDirectory to detect whether the destination
directory exists. If so, report it as "Up-to-date" instead of
"Installing". This resolves message asymmetry with file installations.
Extend the RunCMake.file and RunCMake.install tests to check the
installation output on both the first and second run.
Suggested-by: J Decker <d3ck0r@gmail.com>
Extend the cmake command-line interface to support
cmake -E env [--unset=NAME]... [NAME=VALUE]... COMMAND [ARG]...
This will be useful to run processes with modified environments
without using a shell or a full "cmake -P" script to wrap it.
Extend the RunCMake.CommandLine test to cover success and failure cases.
Inspired-by: Jonathan Bohren <jbo@jhu.edu>
In cmTarget, cmGeneratorTarget, and cmGeneratorExpressionEvaluator, fix
target name lookups to occur in the cmMakefile context of the target
that referenced the name, not the current 'head' target. The context
matters for imported targets because they are directory-scoped instead
of globally unique. We already do this in cmComputeLinkDepends and
cmComputeTargetDepends.
Extend the InterfaceLibrary test with an example covering this behavior.
cb67509b VS: Remove unused parameter of WriteTargetConfigurations
790e1677 VS: Fix subproject .sln dependencies on custom targets
5fba44cf VS: Move VS-only API out of cmGlobalGenerator
Each project listed in a .sln must be marked (or not) as part of the
"default build" for each configuration. For targets created by the
add_custom_target() command we add them to the default build if they
are not excluded in some way or if another target depends on them.
In the top-level .sln, a custom target is excluded if it is not
created with the ALL option to add_custom_target. In subdirectory
.sln files, a target may also be excluded if it is not within the
directory and is brought into the solution only due to a dependency
from another target in the solution.
Fix the "IsPartOfDefaultBuild" and "IsDependedOn" methods to check
every target to be included in the .sln for a dependency on the
custom target. Otherwise transitive dependencies through targets
not in the current subdirectory will not be considered.
Extend the SubProject test with a custom target to cover this case.
Reported-by: William Deurwaarder <William.Deurwaarder@tomtom.com>
Reported-by: Dirk Steenpass <dirk.steenpass@gmail.com>
Add the ability to parse the XML output of the Jacoco tool.
Jacoco (www.eclemma.org/jacoco) is a Java coverage tool.
Add and integrate a class for the parser and
include a test which utilizes the new parser.
ddec418a Features: Add compiler version support to WriteCompilerDetectionHeader.
b7029576 Project: Add configurable name for version computation macros.
78acaafe Project: Separate simulated compiler id from version detection.
567af1a5 WCDH: Issue a better message for version compatibility.
86be733f cmGeneratorExpression: Add workaround for Borland compiler
3495ab0a tests: update unused variable test expected output
2a1b2d84 backtrace: Convert to local paths in IssueMessage
a0829205 genex: remove the need for backtraces
efc20569 cmake: remove dummy backtraces for IssueMessage
d46c650d cmMakefile: return a backtrace
Xcode 1.5 does not support multiple configurations. The generator also
adds some sources internally that cause extra OriginDebug output.
Update the expected output to tolerate it.
Delay use of CMAKE_GENERATOR_TOOLSET until the CMakeSystem.cmake
file has been configured and loaded during the first project() or
enable_language() command. This gives the toolchain file named by
CMAKE_TOOLCHAIN_FILE a chance to set CMAKE_GENERATOR_TOOLSET. This
point is still early enough to set the generator toolset prior to
the initialization of any languages that might use the toolset.
The cmake::GeneratorToolset member variable remains an indication
of what was specified by the -T option or loaded from the cache.
It does not need to be updated based on the toolchain file setting.
The cmMakefile::TryCompile can still pass cmake::GeneratorToolset
into the inner instance because the try-compiled project will do
platform and language initialization using the CMakeSystem module
configured for the outer project.
Extend the RunCMake.GeneratorToolset test with cases that use a
toolchain file to set CMAKE_GENERATOR_TOOLSET.
Add support for Cobertura coverage files written by Java.
Add a test which uses the report from a Java run of Cobertura to calculate coverage.
In the documentation of CTEST_COVERAGE_COMMAND, give a sample .sh file to merge
the Cobertura .ser files and generate the XML report from the merged file.
If we fail to create the generator named by CMAKE_GENERATOR, exit
with an error message instead of crashing. While at it, fix the
wording of the error message when CMAKE_GENERATOR is not set.
Extend the RunCMake.CommandLine test with cases covering the
"cmake --build" option when the named directory does not provide
a CMakeCache.txt with a valid CMAKE_GENERATOR.
While tracing dependencies of a target, cmTargetTraceDependencies
follows sources by full path to determine if the source is to be
produced by a custom command. Commit 4959f341 (cmSourceFileLocation:
Collapse full path for directory comparisons., 2014-03-27) changed
the storage of target sources to be in the form of a normalized
path instead of an unnormalized path.
The path is followed by looking it up in a mapping via
cmMakefile::GetSourceFileWithOutput to acquire an appropriate
cmSourceFile. The mapping is populated with the OUTPUT components
of add_custom_command invocations, however it is populated with
unnormalized paths. This means that the tracing logic does not
find appropriate cmSourceFiles, and does not generate appropriate
build rules for the generated sources.
Normalize the paths in the OUTPUT components of add_custom_command
to resolve this.
The paths in the DEPENDS component of add_custom_command are also
not normalized, leading to the same problem again. Normalize the
depends paths after generator evaluation and expansion.
Teach set_property and get_property an "INSTALL" property type to be
associated with install-tree file paths. Make the properties available
to CPack for use during packaging. Add a "prop_inst" Sphinx domain
object type for documentation of such properties.
Write to the timeout test log file before sleeping and flush to be sure
it is created. Move the check that the after-sleep line is not written
out to the ctest script. Rename the CheckChild test to TestSleep since
it no longer checks. Do not try to read the log file if it does not
exist.
When CMP0053 is in WARN mode, variables get expanded twice, leaking the
fact that the string was expanded twice and changing behavior. Instead,
suppress variable watches when running the expansion to trigger the
CMP0053 warning.
Allow setting build properties based on the features available
for a target. The availability of features is determined at
generate-time by evaluating the link implementation.
Ensure that the <LANG>_STANDARD determined while evaluating
COMPILE_FEATURES in the link implementation is not lower than that
provided by the INTERFACE of the link implementation. This is
similar to handling of transitive properties such as
POSITION_INDEPENDENT_CODE.
The languages used in compiling STATIC libraries need to be propagated
to dependents regardless of the settings of INTERFACE_LINK_LIBRARIES or
CMP0022. They are independent of the libraries in the link interface.
Prior to commit v2.8.12~192^2~2 (Introduce the INTERFACE_LINK_LIBRARIES
property, 2013-06-04) the cmTarget::ComputeLinkInterface code path for
"explicitLibraries" could never be taken for STATIC libraries, so the
logic to propagate languages existed only in the non-explicitLibraries
code path. After that commit, INTERFACE_LINK_LIBRARIES could be set for
STATIC libraries to cause the "explicitLibraries" code path to be taken.
The commit also left the old non-explicitLibraries code path conditional
on CMP0022 not being set to NEW. Thus link language propagation was
left missing from two cases by that commit.
The explicitLibraries code path was fixed to propagate languages by
commit v2.8.12~149^2~1 (cmTarget: Fix iface libraries and languages for
static libraries, 2013-07-26). However, the non-explicitLibraries case
was never taught to propagate languages when CMP0022 is set to NEW. Fix
that now. Factor the logic to propagate link languages out of the link
interface libraries conditions so that it always occurs. Update
Tests/Fortran to set CMP0022 to NEW to test this case (because the test
passes only if link language propagation works).
The languages used in compiling STATIC libraries need to be propagated
to dependents regardless of the settings of INTERFACE_LINK_LIBRARIES or
CMP0022. They are independent of the libraries in the link interface.
Prior to commit v2.8.12~192^2~2 (Introduce the INTERFACE_LINK_LIBRARIES
property, 2013-06-04) the cmTarget::ComputeLinkInterface code path for
"explicitLibraries" could never be taken for STATIC libraries, so the
logic to propagate languages existed only in the non-explicitLibraries
code path. After that commit, INTERFACE_LINK_LIBRARIES could be set for
STATIC libraries to cause the "explicitLibraries" code path to be taken.
The commit also left the old non-explicitLibraries code path conditional
on CMP0022 not being set to NEW. Thus link language propagation was
left missing from two cases by that commit.
The explicitLibraries code path was fixed to propagate languages by
commit v2.8.12~149^2~1 (cmTarget: Fix iface libraries and languages for
static libraries, 2013-07-26). However, the non-explicitLibraries case
was never taught to propagate languages when CMP0022 is set to NEW. Fix
that now. Factor the logic to propagate link languages out of the link
interface libraries conditions so that it always occurs. Update
Tests/Fortran to set CMP0022 to NEW to test this case (because the test
passes only if link language propagation works).
Fix the MUMPS coverage parser:
* Account for tabs after entry points
* Stop double incrementing lines that have explicit calls to the 0 line
* If a line has been previously marked as non executable, but then
contains a count, increment it an extra one to push it back into
the executable code set.
Add a custom routine and corresponding coverage files in the test case.
This file is smaller and has cmcov/mcov files that have data for only
that routine.
Add source file properties to control Xcode file type attributes:
XCODE_EXPLICIT_FILE_TYPE => explicitFileType
XCODE_LAST_KNOWN_FILE_TYPE => lastKnownFileType
Add a RunCMake.XcodeProject test to verify generated project content.
Add properties and variables corresponding to CXX equivalents.
Add features for c_function_prototypes (C90), c_restrict (C99),
c_variadic_macros (C99) and c_static_assert (C11). This feature
set can be extended later.
Add a <PREFIX>_RESTRICT symbol define to WriteCompilerDetectionHeader
to conditionally represent the c_restrict feature.
Provide a function to write a portable header to detect compiler
features. Generate a preprocessor #error for unknown compilers
and compiler versions whose features are not yet recorded. This
error condition might be relaxed in the future, but for now it
is useful for verification of expectations.
ba387cb8 Help: Add notes for topic 'package-disable-registry'
be8ae960 Allow the Package Registry to be disabled (#14849)
d09fda5d Tests: Improve FindPackageTest for in-source builds
ac24a1c0 Tests: Improve FindPackageTest exported package version
When a project is packaged for redistribution the local package
registries should not be updated or consulted. They are for developers.
Add variables to disable use of package registries globally:
* CMAKE_EXPORT_NO_PACKAGE_REGISTRY that disables the export(PACKAGE)
command
* CMAKE_FIND_PACKAGE_NO_PACKAGE_REGISTRY that disables the User Package
Registry in all the find_package calls.
* CMAKE_FIND_PACKAGE_NO_SYSTEM_PACKAGE_REGISTRY that disables the
System Package Registry in all the find_package calls.
Update documentation and unit tests.
bc9a8bba Makefile: Undef FEATURE_STRING iteration define after use.
eb638c75 Tests: Make CompileFeatures feature list lang-specific.
e2f09aff CMakeConfigurableFile: Remove excess newline.
5109b042 Features: Fix GNU 4.8.1 version test.
6a9fdbeb Test: Parameterize the language in the CompileFeature test.
f5bf9d43 Tests: Make CompileFeature tests use highest standard known.
These policies should be checked at the call site that tries to access
the LOCATION or SOURCES property, not the directory scope containing the
target. Thread the caller context through cmTarget::GetProperty to use
for checking the policy setting and emitting a diagnostic with proper
backtrace.
Extend the RunCMake.CMP0026 and RunCMake.CMP0051 tests with
cross-directory cases.
This policy should be checked at the call site that tries to access the
LOCATION property, not the directory scope containing the target.
Thread the caller context through cmTarget::GetProperty to use for
checking the policy setting and emitting a diagnostic with proper
backtrace.
Extend the RunCMake.CMP0026 test with a cross-directory case.
Remove the use of check_cxx_source_compiles which is now just getting in
the way.
Blacklist the cxx_alignof feature in the test with GNU 4.7. The test
file compiles, but it is documented as available first in GNU 4.8.
Include tests for:
- @ expansion during normal execution
- various characters in variable names for comparison between the new
and the old parser
- corner cases in the parsers
- correct messages when behavior is different
Stephen Kelly
Brad King
Peter Collingbourne
Domen Vrankar
Daniele E. Domenichelli
Tim Gallagher
Rolf Eike Beer
Joseph Snyder
Pascal Bach
Clinton Stimpson
Ben Boeckel
Bill Hoffman
Tony Kelman
Sylvain Joubert
Nils Gladitz
Chuck Atkins
Gilles Khouzam