The find_package command, on Windows, has always searched build trees
recently visited by cmake-gui (or CMakeSetup at one time). This was
done when the command was created with the intention of simplifying
workflows involving building multiple dependent projects. However,
this behavior depends on recent developer interaction and therefore
can create different find results based on transient system states.
It can lead to surprising results and user confusion.
Since this behavior was first added CMake has gained many more search
options, better error messages when a package is not found, and a
package registry. The latter in particular allows projects to make
their build trees available for dependent projects to find without
user intervention. Therefore the originally intended workflow can
be achieved in other, more stable ways.
After the above evoluion of find_package we have now decided that
the magic search-where-cmake-gui-was behavior does more harm than
good. Drop it. We do not need a policy for this behavior change
because it only affects interactive use.
Use the KWSys Process "MergeOutput" option to give the child process
the same pipe (or file) for both stdout and stderr. This allows
natural merging of stdout and stderr together instead of merging
on arbitrary buffered read boundaries as before.
5731fb2e ctest_build: mention CTEST_BUILD_COMMAND in the docs
753da8c6 ctest_build: update the default target documentation
5ab896ae ctest_build: spruce up the documentation a bit
This reverts commit 242c3966 (add_custom_command: Diagnose
MAIN_DEPENDENCY limitation, 2015-03-09) and the follow up commit
b372a99a (UseSWIG: Do not use MAIN_DEPENDENCY on custom commands,
2015-03-26).
I misdiagnosed the underlying issue that prompted creation of policy CMP0057.
The actual issue surfaces when a single custom command's MAIN_DEPENDENCY
is listed in more than one target; this issue will have to be addressed
independently.
The previous example for CMP0054 did not show how critical the policy is
since the result is the same in both cases (NEW and OLD behavior).
Instead show an example when the policy does make a difference.
Add sections to the cmake-buildsystem(7) manual and cross-reference
them with relevant variables and target properties. This avoids
duplicating the information and allows it to be more detailed.
Many projects put their project() call first, but the actions taken
by this command can be influenced by policies and other information
set by a call to cmake_minimum_required. Document in each of these
two commands that cmake_minimum_required should be called first.
Suggested-by: Alan W. Irwin
The documentation of this variable in the CTest module is outdated
and has been superseded by the ctest(1) manual. In particular, the
latter mentions that it works with the Ninja generator as well as
makefile generators. Remove the documentation from the CTest module
and replace it with a link to the main variable documentation (which
already references the ctest(1) manual).
66b641f4 Help: Add notes for topic 'add-GreenHills-MULTI-generator'
48004d9d Add a 'Green Hills MULTI' generator on Windows
051d8be1 cmLocalGenerator: Constify some cmTarget and cmGeneratorTarget arguments
Green Hills MULTI is an IDE for embedded real-time systems. The IDE's
product page can be found here:
http://www.ghs.com/products/MULTI_IDE.html
It supports cross compiling on ARM, Intel x86, and other architectures
with various operating systems. The IDE exists on Linux and Windows
host systems, but CMake will currently only generate the project files
on Windows host systems.
The UPPERCASE name was inconsistent with config-packages, the
find_dependency macro, and even FPHSA itself, which expects
components to be specified with names matching ExactCase.
The FOUND_VAR was only permitted to have two possible values, and
now both are set for compatibility. Document it as obsolete, and
adjust the code for the same. Users of the variable should just
remove it.
We never implemented them for VS 11 (2012), 12 (2013), or 14 (2015).
For VS 10 (2010) the reload macro does not work correctly when run from
inside a build launched through the IDE because stopping the build kills
the CMake that is driving the reload. Fortunately VS >= 10 know how to
reload the whole solution anyway.
The GITUpdateCustom and P4UpdateCustom options take only one command
line with all arguments as a ;-list, not a ;-list of multiple command
lines. Fix the incorrect documentation originally added by commit
v3.1.0-rc1~463^2 (Help: Document ctest dashboard client usage,
2014-05-30).
882f48e5 Link libraries by full path even in implicit directories
318cd370 Help: Add link target for Find Modules section of cmake-developer.7
1535dcd8 Tests: Teach RunCMake to optionally merge command output to stdout
When CMP0003 was first introduced we wanted to link all libraries by
full path. However, some projects had problems on platforms where
find_library would find /usr/lib/libfoo.so when the project really
wanted to link to /usr/lib/<arch>/libfoo.so and had been working by
accident because pre-CMP0003 behavior used -lfoo to link.
We first tried to address that in commit v2.6.0~440 (Teach find_library
to avoid returning library paths in system directories, 2008-01-23) by
returning just "foo" for libraries in implicit link directories. This
caused problems for projects expecting find_library to always return a
full path. We ended up using the solution in commit v2.6.0~366 (...
switch library paths found in implicit link directories to use -l,
2008-01-31). However, the special case for libraries in implicit link
directories has also proven problematic and confusing.
Introduce policy CMP0060 to switch to linking all libraries by full path
even if they are in implicit link directories. Explain in the policy
documentation the factors that led to the original approach and now to
this approach.
Prefix test commands with the CROSSCOMPILING_EMULATOR property
for target executables. This allows test suites to be run on the host
when crosscompiling.
If the CMAKE_CROSSCOMPILING_EMULATOR variable is defined, and
CMAKE_CROSSCOMPILING is TRUE, then use CMAKE_CROSSCOMPILING_EMULATOR to run
the try_run executables. This prevents the need to populate
TryRunResults.cmake when cross compiling.
Extend sentences in other documentation linking to this manual to
say that it has a list of supported compilers.
Co-Author: Brad King <brad.king@kitware.com>
Add CROSSCOMPILING_EMULATOR target property for executables. This is used by
subsequent patches to run exectuables created for the target system when
crosscompiling. The property is initialized by the
CMAKE_CROSSCOMPILING_EMULATOR variable when defined.
6f82b5e8 Help: Link to properties in set_tests_properties.
66f5af29 Help: Link to properties in set_directory_properties docs.
f7dd3f7c Help: Add link in set_source_files_properties command docs.
3b256173 Help: Shorten too-long title marker.
8fc3a2fb Help: Add references to cmake-property sections.
Organize the documentation into subsections to separate the signatures.
Refactor the discussion of allowed link items into bullet points and
expand into more detail on each.
XAML files are by default of type Page in the vcxproj and can be
overriden by setting the VS_XAML_TYPE property. The .cpp and .h file
of the same name are automatically added as depending on the XAML file.
New VSXaml test builds a basic XAML WindowsStore 8.1 app with VS2013.
3af13782 Help: Update discussion of relocable packages in cmake-packages(7)
227992c3 Help: Reorganize and refine discussion of relocatable packages
031d894f Help: Place relocatable package notes in their own subsections
6e331ce9 Help: Fix typo in cmake-packages(7) manual
ba9b9d79 Help: Fix syntax in non-relocatable usage requirements example
Many places in our documentation refer to "Makefile Generators" or
"Visual Studio" generators as a group of generators. Give such
places a linkable document section to reference since they cannot
cross-reference the individual generators in the groups.
Explain at the beginning of the section the requirements for a package
to be relocatable to justify the rest of the section content.
Generalize example to use fictional package names instead of real ones,
especially because FindBoost provides no alternative yet. Reword the
discussion to represent the preferred approach as "ideal" but also
suggest workarounds when find modules do not provide the imported
targets.
Re-organize the content added to the cmake-packages(7) manual by
* commit v3.0.0-rc1~184^2 (Help: Document export(EXPORT) in the
cmake-packages manual, 2013-12-23),
* commit v3.0.0-rc1~154^2~1 (Help: Add notes about relocatability
of config-file packages, 2014-01-07), and
* commit v3.2.0-rc1~345^2 (Help: Warn that paths should not be used
in INTERFACE_ build properties, 2014-11-22).
These commits broke the natural flow of the original manual and made
wording after the new content make less sense. Move the content into
new subsections to restore the flow of the original manual and to
make explicitly the purpose of the new content.
Shorten the relocatable usage requirement "warnings". Refer to the
new cmake-packages(7) manual subsection to reduce duplication. Also
clarify the distinction between paths to library dependencies and
paths to their header files.
These notes apply only for the use case of creating a package for
redistribution on machines other than that where it is built. Clarify
this to readers by placing the discussion in dedicated sections titled
accordingly.
Beginning in CUDA 5.5 a static version of the cuda runtime library
became available. Since nvcc defaults to using this library over the
shared version, FindCUDA will also default to using this version. There
are many advantages to using the static version (most importantly to
avoid conflicts with multiple versions when building a CUDA based
library). Offer a CUDA_USE_STATIC_CUDA_RUNTIME option to control
this behavior.
Add policy CMP0059 to cover this change. The property has been
deprecated since CMake 2.4 anyway.
This will help clean up cmMakefile -- the DefineFlagsOrig member should
not need to exist.
Much of the information in the old set() command documentation is now
covered in the cmake-language(7) manual. Rewrite the documentation
with this in mind. Split up the signatures for each kind of variable
into different subsections.
Make wording of the directory and target properties more consitent
and complementary. Specify that the value is a ";-list" with a link
to the cmake-language(7) manual section on lists.
Revert commit v3.0.0-rc1~175^2~20 (add_dependencies: Disallow use with
INTERFACE_LIBRARY, 2013-12-25). Teach our dependency analysis to
transitively follow INTERFACE target utility dependencies as was done or
IMPORTED targets in commit v2.8.6~127^2~1 (Allow add_dependencies() on
imported targets, 2010-11-19). Extend the InterfaceLibrary test with a
case to cover header generation for a header-only INTERFACE library via
a custom target.
Extend the ``DATA{Dir/,...}`` syntax with a new ``RECURSE:`` option
to enable recursive matching of associated files. This will allow
an entire directory tree of data to be referenced at once.
bd9c7f9b Ninja: Add policy to require explicit custom command byproducts
ed8e30b0 cmGlobalNinjaGenerator: Optimize handling of known build outputs
ad094f43 cmGlobalNinjaGenerator: Fix spelling of "unknown"
82a37d3c cmGlobalNinjaGenerator: Drop unused member
4178cd88 Help: Add notes for topic 'xcode-xctest'
87a4b858 Tests: Add XCTest example to test Frameworks and Cocoa App Bundles
ba14510b OS X: Add FindXCTest module
3714955b OS X: Add handling for XCTest bundles
54a5cdbb Tests: Compute Xcode version for any generator on OS X
Add a module to lookup XCTest Framework and xctest utility.
It also provides APIs for creating 'xctest' targets.
Signed-off-by: Gregor Jasny <gjasny@googlemail.com>
Add policy CMP0058 to avoid generating 'phony' ninja rules for unknown
custom command dependencies. This requires projects to specify their
custom command byproducts explicitly. With this requirement we no
longer have to assume that unknown custom command dependencies are
generated and can instead simply assume they are source files expected
to exist when the build starts. This is particularly important in
in-source builds. It is also helpful for out-of-source builds to allow
Ninja to diagnose missing files before running custom command rules that
depend on them.
GLOB lists directories by default and GLOB_RECURSE does not.
LIST_DIRECTORIES enables user to control the behavior explicitly for
consistently for both GLOB and GLOB_RECURSE.
Implement a brand new FindMatlab module:
- Add support for versions and components.
- Find Matlab and its version in a more precise and multiplatform way.
- Add API to create a new mex extension with documentation.
- Add API to add matlab unit tests (with or without the unit test framework).
- Find as much as possible based on a single Matlab_ROOT_DIR cache entry
and allow the user to change it to re-find everything.
ec428faf Genex: Extend cmGeneratorExpressionContext constructor.
082b6a9d Genex: Split cmGeneratorExpressionContext into own file.
9df1f0fc Genex: Split cmGeneratorExpressionNode into own file.
80b9f0cb Genex: Extract an evaluateWithContext method.
642048ce Help: Move docs of $<0:...> and $<1:...> to output section.
232a6883 Help: Add release notes for target-language-genex.
9e168941 File(GENERATE): Process genex evaluation files for each language.
b734fa44 Genex: Allow COMPILE_LANGUAGE when processing include directories.
0b945ea9 Genex: Allow COMPILE_LANGUAGE when processing compile definitions.
5c559f11 Genex: Enable use of COMPILE_LANGUAGE for compile options.
e387ce7d Genex: Add a COMPILE_LANGUAGE generator expression.
4a0128f4 VS6: Compute CMAKE_*_FLAGS and COMPILE_DEFINITIONS* only when needed
Previously the module did not support projects using installation
components because install(PROGRAMS) was never called with COMPONENT.
Add an option to specify the COMPONENT so that projects doing this do
not have to resort to using CMAKE_INSTALL_SYSTEM_RUNTIME_LIBS_SKIP and
writing the install rule by hand.
4efef3f7 Help: Clarify that ARGV# beyond ARGC will have an undefined behavior (#15380)
e3363bfb Help: Refine the .rst formatting of macro and function documentation
Allow URL templates to contain a %(algo:<key>) placeholder that is
replaced by mapping the canonical hash algorithm name through a map
defined by the <key>.
Extend the Module.ExternalData test to cover the behavior.
Extend the RunCMake.ExternalData test to cover error cases.
6cc01c14 CPackWIX: Add release notes for the wix-shortcut-properties topic.
135febf0 CPackWIX: Enhance CMake CPack WIX generated installer.
e6731f48 CPackWIX: Add new CPACK_STARTUP_SHORTCUTS property.
279605f5 CPackWIX: Add installed file properties for the creation of shortcuts.
53d7daff CPackWIX: Refactor start menu and desktop shortcut creation.
dc0f3fb4 CPackWIX: Explicitly list CPack WIX headers for IDE convenience.
Since jsoncpp 0.7.0 (2014-11-20) the upstream may provide a CMake
package configuration file such that find_package(jsoncpp) will find a
jsoncppConfig.cmake file. In order to avoid conflicting with this
(especially on case-insensitive filesystems), and since we always prefer
projects to provide package config files (that they maintain), it is
better to not provide FindJsonCpp publicly.
Move FindJsonCpp into a private source directory that is not installed
so that we can still use it for building CMake itself.
Reported-by: Ryan Pavlik <ryan.pavlik@gmail.com>
The find_package command already knows how to compute installation
prefixes from PATH. Use the same approach to establish prefixes for
find_library, find_file, and find_path to use to look in directories
like "<prefix>/lib[/<arch>]" and "<prefix>/include" for libraries and
headers. This will reduce the amount of configuration end users need to
do to establish a work environment rooted under a specific prefix.
4cf3589e Help: Add notes for topic 'compiler-version-Fortran'
f611406f Fortran: Test that CMAKE_Fortran_COMPILER_VERSION is set (#15372)
c6e1f464 Fortran: Detect G95 compiler version
0033faac Fortran: Detect PGI compiler version
302d47b1 Fortran: Detect XL and VisualAge compiler versions
8c8b77a5 Fortran: Detect GNU compiler version
49562a77 Fortran: Detect PathScale compiler version
aa77b631 Fortran: Detect SunPro compiler version
2e09c423 Fortran: Detect Intel compiler version
e6ebc814 Fortran: Add infrastructure to detect compiler version (#15372)
Pre-C++98 compilers required that the template argument be
used in the function parameters. Those compilers are no longer
supported as hosts, so drop the workaround.
This will allow us to use a value other than just the config name
for the project OutputDirectory setting used for $(OutDir).
Also use $(ConfigurationName) instead of $(OutDir) for the link
directory configuration suffix since that is a hard-coded instance of
a use case for CMAKE_CFG_INTDIR.
This will allow per-config destinations for targets in EXPORT sets.
Using multiple install(TARGETS) with separate CONFIGURATIONS is
rejected as a target appearing more than once in an export set.
Now instead one can write
install(TARGETS foo EXPORT exp DESTINATION lib/$<CONFIG>)
to get a single logical membership of the target in the export set
while still having a per-config destination.
f7e33820 Add release notes for export-interface-source-files.
6da65b39 Allow export of targets with INTERFACE_SOURCES.
736bcb96 Tests: Move IfacePaths test stderr files.
d9f8390d Tests: Run IfacePaths tests with a parameter.
cc152094 Tests: Split part of include_directories test to a generic location.
63668954 Help: Add notes for topic 'makefile-progress-improvements'
ae775fe8 Makefile: Change link step message color to bold green
7bb50e4a Makefile: Add progress to link step messages
c6ada827 Makefile: Print all color escape sequences before newline
8521fdf5 Makefile: Fix output during parallel builds (#12991)
69ac6d27 bootstrap: Enable color Makefile output
1814cf74 Help: Add notes for topic 'add-CheckFortranCompilerFlag'
54e900ab CheckFortranCompilerFlag: Add test case
393a45e2 CheckFortranCompilerFlag: Add module to check Fortran flag existence
In commit v3.0.0-rc1~9 (Help: Rename 3.0 release notes to 3.0.0,
2014-02-19) we anticipated the possibility of bugfix-only release notes.
However, in practice we have no release notes for bug fix releases
because we do not cover bug fixes in release notes at all, only new
features. Instead we've been updating the feature-level release notes
document in bug fix releases, treating errors in the document as bugs.
It makes more sense to maintain release notes at the feature-release
level, so rename the documents accordingly. Also update the document
titles and intro text to refer only to feature versions and not bugfix
versions.
Add section headers similar to the 3.1 release notes and move each
individual bullet into an appropriate section. Revise and consolidate
some bullets covering related areas.
Co-Author: Stephen Kelly <steveire@gmail.com>
Move all development release notes into a new version-specific document:
tail -q -n +3 Help/release/dev/* > Help/release/3.2.0.rst
git rm -- Help/release/dev/*
except the sample topic:
git checkout HEAD -- Help/release/dev/0-sample-topic.rst
Reference the new document from the release notes index document.
Add a title and intro sentence to the new document by hand.
809a5a5e Help: Add notes for topic 'CTestCoverageCollectGCOV-refinements'
03c0812c CTestCoverageCollectGCOV: Fix handling of international characters
8caa4e72 CTestCoverageCollectGCOV: Add test case
5c828cc8 CTestCoverageCollectGCOV: Allow custom flags to gcov
30cb628e CTestCoverageCollectGCOV: Fix handling of large file counts
Define an empty string in CMAKE_<LANG>_STANDARD_DEFAULT to mean that
the toolchain has no notion of lanuage standard levels. In this case
the <LANG>_STANDARD[_REQUIRED] properties will have no effect.
Update the RunCMake.CompileFeatures test to exclude the
LinkImplementationFeatureCycle test when there is no standard default.
It can never fail because no use of specific features will adjust the
CXX_STANDARD level required for any target since the standard levels
have no meaning in this case.
ab9fa54d Xcode: Switch to internal CMAKE_MAKE_PROGRAM lookup by generator (#15324)
11e2e6ca Xcode: Select make program at build time
e4055a61 Xcode: Add internal API to find xcodebuild
The "cmakexbuild" wrapper is not needed for Xcode 4 and above, and the
path to it may change when CMake moves. Avoid storing a specific path
to a build program in CMakeCache.txt and instead compute the value for
CMAKE_MAKE_PROGRAM on demand. However, if a user does set the value
explicitly then honor it.
This does for Xcode what commit v3.0.0-rc1~260^2~4 (VS: Switch to
internal CMAKE_MAKE_PROGRAM lookup by generators, 2013-11-15) did for
Visual Studio generators.
This will make them use the 'console' pool with the Ninja generator.
Impacted targets are:
- Built-in targets: install, install/local, install/strip, tests,
package, package_source, rebuild_cache
- Targets provided by the CTestTargets module: Nightly, Continuous,
Experimental,
and all their variants (*Start, *Configure, ...)
Read file names from the lines of a specified file. Reject input lines
starting in '-' to leave room for option parsing to be added later. Add
just '--add-file=' now to allow files starting in '-' to be specified.
d0adcccb try_run: Add tests for LINK_LIBRARIES with mock libraries.
223c5cb7 try_run: Add test for bad link libraries.
e2b1f058 try_run: Add support for LINK_LIBRARIES option.
Most functionality is already implemented in Source/cmCoreTryCompile.{h,cxx}.
Document and improve argument parsing.
This functionality is already being used by a number of modules, like
CheckCSourceCompiles.cmake, but it is not documented.
The command has been documented as 'deprecated', but it is not really
slated for removal and can still be used. Clarify this in the
documentation. While at it, revise the documentation to use wording
more consistent with that now in target_link_libraries.
Suggested-by: Christoph Grüninger <foss@grueninger.de>
When using system curl, we trust it to be configured with desired CA
certs. When using our own build of curl, we use os-configured CA certs
on Windows and OS X. On other systems, try to achieve this by searching
for common CA cert locations. According to a brief investigation, the
curl packages on popular Linux distros are currently configured as:
* Arch: /etc/ssl/certs/ca-certificates.crt
* Debian with OpenSSL: /etc/ssl/certs
* Debian with GNU TLS: /etc/ssl/certs/ca-certificates.crt
* Debian with NSS: /etc/ssl/certs/ca-certificates.crt
* Fedora: /etc/pki/tls/certs/ca-bundle.crt
* Gentoo with OpenSSL: /etc/ssl/certs
* Gentoo without OpenSSL: /etc/ssl/certs/ca-certificates.crt
Teach CMake and CTest to look for these paths and use them as a CA path
or bundle when no other os-configured or user-specified CAs are
available.
Provide a function to run gcov and create a tarball of results.
Since CDash tracks the md5sum of the files uploaded, use the
--mtime option with "cmake -E tar" so that tar files could be
created that would have the same md5sum with the same content.
This adds support for the new cdash API where arbitrary files can be
uploaded to the CDash server. This CDash API communicates via json
files so the json parser jsoncpp was added to the Utilities directory.
Add an option to set the mtime of entries in a tarball so that one can
create a tarball with a consistent content hash (e.g. MD5) for a given
set of files regardless of their current timestamps on disk. This will
be useful for submission of tarballs to CDash, which tracks content
hashes to avoid duplication.
Inspired-by: Bill Hoffman <bill.hoffman@kitware.com>
004e1540 Features: Record for GNU 4.4.
2a5ca650 Features: Wrap failure-test in UNIX condition.
1ae2c6b2 Features: Blacklist cxx_constexpr test for GNU 4.5.
c66e3317 Features: Use a more-common feature in cycle-test.
c43a6dc5 Features: Update comment in test to match the code.
78259135 Features: Test presence of cxx_auto_type with genex.
7b9fc88b Features: Remove outdated comment.
00194ea7 Help: Add notes for topic 'SolarisStudio-compile-features'
bcb04783 Features: Record for SolarisStudio 12.4.
536c535c Features: Adjust cxx_variadic_templates unit test for SolarisStudio.
5d57970d Features: Use variable in cxx_inheriting_constructors test.
69182ce4 Features: Ensure that the cxx_auto_type test is correct.
59e6e15c Help: Add notes for topic 'WriteCompilerDetectionHeader-multi-file-lang'
54156d72 WCDH: Generate per-language files in multi-file mode.
d84d6ed4 WCDH: Allow compilers to specify features for one language but not the other.
7dcdfec9 WCDH: Find a language-specific DetermineCompiler.cmake if present.
770ba876 Help: Add notes for topic 'GNU-4.6-compile-features'
b15c008f Features: Record for GNU 4.6.
f13a2eb1 Features: Adjust the RunCMake test to use more-common features.
1f19ac4d Features: Adjust cxx_variadic_templates unit test for GNU < 4.7.
0798d1e5 Features: Extend the generalized_initializers test for GNU < 4.7.
938bd94e Features: Test __GXX_EXPERIMENTAL_CXX0X__ macro for GNU < 4.7 compatibility.
462c630b Features: Don't test __cplusplus value for CXX98 on GNU.
222ec86f Features: Test an old value of __STDC_VERSION__ for GNU < 4.7 compatibility.
6e909035 Features: Record C/CXX dialect flags for GNU 4.6.
bfc995cc Features: Remove wrong content from else() condition.
1532b921 Features: Make cxx_noexcept available from GNU 4.6.
1f4649e6 Features: Update the default_dialect test for old GNU-like compilers.
a60027a6 Features: Ensure appropriate return value from feature test macros.
This fixes several reported bugs about CMake not handling
non-ascii paths on Windows.
Practically, the use of some unicode characters may still
be limited by the build or compiler tools.
For example, a user may be limited by the build tools to
using characters within the Windows ANSI code page (which can
include non-ascii characters in the current system language).
da928d30 Help: Add notes for topic 'Apple-compiler-selection'
1f085e11 OS X: Resolve compiler in /usr/bin to that reported by Xcode xcrun
85d31735 CMakeDetermineCompiler: Factor out xcrun invocation into a macro
dcd72a74 Help: Add notes for topic 'Xcode-clang-compile-features'
3ad893b5 Features: Record for historical Xcode clang versions.
98965fb1 Features: Record dialect flags for AppleClang 4.0+.
Revert commits:
2d738ce3 Help: Add notes for topic 'feature_record_msvc'
f73718c9 Features: Enable writing of MSVC compiler feature header.
64c30bdc Features: Record for MSVC C++ 2015 and MSVC C 2010-2015.
225c0ef8 Features: Record for MSVC 2010-2013.
This topic was merged to master prematurely, so remove it.
4035ef78 cmake -E tar: error out on multiple compression formats
d811d238 cmSystemTools: use an enumeration for compression formats
df16dcfb cmake -E tar: add support for .xz files with 'J'
b0a5d393 cmake -E tar: clean up flag documentation
3660d063 cmTarget: Use insert instead of std::copy.
5c28495f Help: Remove documented restriction on template use.
ac3d3829 Help: Remove documented restriction on find in conditions.
36b8de56 Help: Remove documented restriction on insert APIs.
6162c919 Use two-iterator std::set::insert where appropriate.
238dd2fb Use insert instead of a loop in some cases.
2f7ef7e3 Revert "Misc. fixes for the Oracle / Sun compiler."
4c69ec6f SolarisStudio: Use alternative standard library to build CMake.
2d738ce3 Help: Add notes for topic 'feature_record_msvc'
f73718c9 Features: Enable writing of MSVC compiler feature header.
64c30bdc Features: Record for MSVC C++ 2015 and MSVC C 2010-2015.
225c0ef8 Features: Record for MSVC 2010-2013.
Support was added in commit v3.1.0-rc1~475^2 (Features: Add support
for C++14 features., 2014-05-06), but the documentation for this
property was not amended.
AppleClang does not support the cxx_thread_local feature, even
though it is based on a Clang version which does support the
feature.
http://stackoverflow.com/a/23850891/2428389
A possible reason for that is that thread_local might be used as
a variable in existing Apple SDK headers.
Extend the WriteCompilerDetectionHeader module to generate a define
for that feature with portability fallbacks. For the avoidance of
making it easy to write code which looks correct but which has odd
runtime behavior, don't set the define symbol at all if no
equivalent keyword is known.
bb83cdaa Help: Add notes for topic 'AppleClang-5.1-features'
bd6b42c1 Features: Record for AppleClang 5.1
b341799e Tests: Fix RunCMake.CompileFeatures test NonValidTarget2 case
The change in commit v3.1.0-rc1~174^2 (Makefile: Handle '#' in
COMPILE_OPTIONS, 2014-08-12) was not compatible with code that
tries to workaround the original bug. Unfortunately there is no
good way to fix the bug in a compatible way. Add a release note
to call attention to the change.
On OS X, when CMAKE_USE_OPENSSL is OFF, use the OS implementation.
This will allow the OS-configured CA list to be trusted automatically.
This is supported on OS X 10.6 and above using AppleClang, Clang, and
GNU compilers.
Also add a 'CMAKE_ANDROID_API_MIN' variable to set the property
default. Teach the VS generator to write the MIN API value into
Nsight Tegra project files.
When install(EXPORT) is given an absolute destination we cannot compute
the install prefix relative to the installed export file location.
Previously we disallowed installation of targets in such exports with a
relative destination, but did not enforce this for target property
values besides the location of the main target file. This could lead to
broken installations when the EXPORT is installed to an absolute path
but usage requirements are specified relative to the install prefix.
Since an EXPORT installed to an absolute destination cannot be relocated
we can just hard-code the value of CMAKE_INSTALL_PREFIX as the base for
relative paths. This will allow absolute install(EXPORT) destinations
to work with relative destinations for targets and usage requirements.
Extend the ExportImport test with a case covering this behavior.
The use of FeatureSummary inside a find module is not a convention
yet used by upstream CMake modules. Drop the example from the
documentation about how to write find modules. If in the future
we add use of FeatureSummary to many of the upstream find modules
then this example can be restored as part of establishing the
convention.
The use of FeatureSummary inside a find module is not a convention
yet used by upstream CMake modules. Drop the example from the
documentation about how to write find modules. If in the future
we add use of FeatureSummary to many of the upstream find modules
then this example can be restored as part of establishing the
convention.
In commit v3.1.0-rc1~484^2 (Help: Format and revise file() command
documentation, 2014-05-23) the signature of file(GENERATE) was
accidentally simplified too much and dropped specification of the
required argument ordering. Restore the signature to make the order
clear.
If this option is enabled, the test step is created with the
EXCLUDE_FROM_MAIN option, and if TEST_BEFORE_INSTALL is enabled, the
install step does not depend on the test step.
This means that the test step is never executed, unless the test target
is explicitly created by calling ExternalProject_Add_StepTarget, or by
passing it with the STEP_TARGETS option, or with the EP_STEP_TARGETS
directory property.
An IMPORTED target in either type of package can equally depend on
an IMPORTED target in a Find module, which must be found as a
dependency, which is presumably the problem being implied. This is
not a distinction of creating an IMPORTED target in a Find module.
The FindXerces module was added in commit v3.1.0-rc1~155^2 (FindXerces:
New module to find Apache Xerces-C++, 2014-08-17). However, there are
two implementations of Xerces, one in C++:
http://xerces.apache.org/xerces-c/
and one in Java:
http://xerces.apache.org/xerces-j/
Rename FindXerces to FindXercesC to clarify that it is about the C++
implementation.
While at it, add the missing CMake 3.1 release note about this module.
Suggested-by: Erik Sjölund <erik.sjolund@gmail.com>
Copy CMAKE_EXE_LINKER_FLAGS into the test project generated by
try_compile, just like we already copy CMAKE_<LANG>_FLAGS.
Add CMake Policy CMP0056 to activate this behavior in a compatible way,
but do not warn by default when the policy is not set since it will
affect all try_compile calls.
Extend the RunCMake.try_compile test with a case covering this behavior
for each policy setting.
With PushScope and PopScope, keeping track of another bit of data for
each scope isn't easy. Instead, store it as another CMake variable so it
gets implicitly tracked along with everything else.
This works in a revert of commit
7d674b5f0b.
Provide options to fail without blocking or to block up to a timeout.
Provide options to specify the scope containing the lock so it can be
released automatically at the end of a function, file, or process.
Extend the RunCMake.file test with cases covering the file(LOCK) command
usage and error cases.
Add a VS_DEPLOYMENT_LOCATION source file property to specify where to
put files that are part of the package. For example:
set_property(SOURCE ${ASSET_FILES} PROPERTY VS_DEPLOYMENT_LOCATION "assets")
Without this, sources marked with VS_DEPLOYMENT_CONTENT cannot be
located properly.
Create properties VS_SHADER_ENTRYPOINT and VS_SHADER_MODEL. Without
these many .hlsl source files may not be possible to use. Extend the
VSWinStorePhone test project to cover them.
Revert the feature added by commit v3.1.0-rc1~420^2~2 (FindOpenGL:
Provide imported targets for GL and GLU, 2014-05-31). Unfortunately it
does not work on Windows because the full path to each library file is
not actually known. The IMPORTED_LOCATION of an imported target must be
a full path, but OPENGL_gl_LIBRARY is just 'opengl32' on Windows because
the actual library file is in some implicit link directory that we may
know know.
More infrastructure will be needed in CMake to allow a name-only
imported library. Until that exists, we will not be able to provide
imported targets in FindOpenGL.
In commit 079e8469ab (... OpenGL always needs X11 on Unix, 2002-09-05)
the FindOpenGL module was taught to search for X11 as a dependency of
the OpenGL library. This was done without a detailed explanation, and
the dependency should not be explicitly needed because OpenGL headers
should not expose applications to X11 APIs directly.
Unfortunately the only way to know if anything legitimately depends on
this behavior (perhaps in static library cases) is to simply remove it
and wait for issues to be reported. If so, then we can add some kind of
compatibility setting for this later. Add a release note to draw
attention to this change.
Reported-by: Dainius "GreatEmerald" Masiliūnas <pastas4@gmail.com>
Some applications only need the OpenSSL crypto library and want to avoid
linking against the SSL library. Set OPENSSL_CRYPTO_LIBRARY and
OPENSSL_SSL_LIBRARY in the code paths that do not need to find them
separately, and document them publicly. This allows applications to be
more specific when linking against OpenSSL.
8a75c7ef Help: Document the export limitation of INTERFACE_SOURCES.
e1348056 Export: Disallow export of targets with INTERFACE_SOURCES
bb5905bb cmTarget: Don't allow relative paths in INTERFACE_SOURCES
Since commit v3.1.0-rc1~479^2~1 (Add an "installed file" property
scope, 2014-05-15) the get_property and set_property commands
support an 'INSTALL' scope. Add documentation for this scope.
bb1111ea Help: Warn that paths should not be used in INTERFACE_ build properties.
96691d12 Help: Fix typo in genex in documentation.
f8f02451 Help: Use a property-specific command instead of the generic one.
8609a884 Help: Make remaining build property docs consistent.
bcface39 Help: Link to target_link_libraries from target properies.
e12926e7 Help: Format the LINK_INTERFACE_LIBRARIES target properies.
c8540e94 Help: Unify the help text of INTERFACE_ build properties.
Since commit v2.8.11~227^2~1 (Don't allow targets args in the new target
commands, 2013-01-29) the target_include_directories command does not
support target names on the right hand side, but that commit forgot to
remove it from the docs. It was never released with such support.
Update the command documentation now.
2d75d7e5 Help: Add notes for topic 'console-pool'
f42d86f0 Ninja: Implement USES_TERMINAL using the console pool if available
f281ae01 Ninja: Remove unused declaration
d5eae556 Ninja: factor out the test for console pool support
4d1fedf4 Give the interactive cache editor the USES_TERMINAL property
fe5d6e8c Add USES_TERMINAL option for custom commands
ad6ee426 Rename doing_verbatim to doing_nothing
A common idiom in CMake-based build systems is to have custom commands
that generate files not listed explicitly as outputs so that these
files do not have to be newer than the inputs. The file modification
times of such "byproducts" are updated only when their content changes.
Then other build rules can depend on the byproducts explicitly so that
their dependents rebuild when the content of the original byproducts
really does change.
This "undeclared byproduct" approach is necessary for Makefile, VS, and
Xcode build tools because if a byproduct were listed as an output of a
rule then the rule would always rerun when the input is newer than the
byproduct but the byproduct may never be updated.
Ninja solves this problem by offering a 'restat' feature to check
whether an output was really modified after running a rule and tracking
the fact that it is up to date separately from its timestamp. However,
Ninja also stats all dependencies up front and will only restat files
that are listed as outputs of rules with the 'restat' option enabled.
Therefore an undeclared byproduct that does not exist at the start of
the build will be considered missing and the build will fail even if
other dependencies would cause the byproduct to be available before its
dependents build.
CMake works around this limitation by adding 'phony' build rules for
custom command dependencies in the build tree that do not have any
explicit specification of what produces them. This is not optimal
because it prevents Ninja from reporting an error when an input to a
rule really is missing. A better approach is to allow projects to
explicitly specify the byproducts of their custom commands so that no
phony rules are needed for them. In order to work with the non-Ninja
generators, the byproducts must be known separately from the outputs.
Add a new "BYPRODUCTS" option to the add_custom_command and
add_custom_target commands to specify byproducts explicitly. Teach the
Ninja generator to specify byproducts as outputs of the custom commands.
In the case of POST_BUILD, PRE_LINK, and PRE_BUILD events on targets
that link, the byproducts must be specified as outputs of the link rule
that runs the commands. Activate 'restat' for such rules so that Ninja
knows it needs to check the byproducts, but not for link rules that have
no byproducts.
Now that we know the year component of this VS version we
can add it to the generator name. For convenience, map
the name without the year to the name with the year.
Teach the add_custom_command and add_custom_target commands a new
USES_TERMINAL option. Use it to tell the generator to give the command
direct access to the terminal if possible.
Format the reStructuredText markup manually. Organize the command
options into a definition list. Use inline markup to cross-reference
related documents.
string SUBSTRING command now ignores length if it points
past end of string and uses end of string instead.
String SUBSTRING tests now cover more corner cases.
3c497f11 Help: Add notes for topic 'ExternalProject_UPDATE_DISCONNECTED'
aba5cec6 ExternalProject: Add unit tests for UPDATE_DISCONNECTED
3f606fa7 ExternalProject: Add UPDATE_DISCONNECTED option
c0b749cf ExternalProject: Always add a command to a step
Add support for Sun/Uniforum/GNU gettext libintl. This belongs in CMake
rather than upstream because:
* There are multiple upstreams (Sun, GNU).
* It may or may not be in the glibc C library depending
upon the platform and build options used.
Although we already have a FindGettext module, that is for the tools.
This module is for the library, and is independent because it's
perfectly OK to use libintl without the gettext tools (and vice versa),
and they might not all be found. Add cross references between the two
modules in notes to make the relationship clearer.
The changes made by commit v3.1.0-rc1~46^2~1 (FindITK: Drop this ancient
compatibility module, 2014-10-02) and commit v3.1.0-rc1~46^2 (FindVTK:
Drop this ancient compatibility module, 2014-10-02) need to come with
release notes explaining that the modules were dropped. Also remove a
release not related to an update made to FindVTK that was never
released.
1531df2b configure_file: Warn about unknown arguments
4abbb140 Qt4: Fix configure_file call to use COPYONLY, not COPY_ONLY
bd7ba8e2 KWSys: Fix configure_file call to use COPYONLY, not COPY_ONLY
e9282782 Help: Fix configure_file call to use COPYONLY, not COPY_ONLY
Brad King
Raffi Enficiaud
Ben Boeckel
Robert Goulet
Nils Gladitz
Tamás Kenéz
Geoff Viola
Stephen Kelly
Matt McCormick
Robert Maynard
Gilles Khouzam
James Bigler
Gregor Jasny
Bill Hoffman
Stanislav Ionascu
Domen Vrankar
Raffi Enficiaud
Gaëtan Lehmann
Johan Andruejol
Daniele E. Domenichelli
Zack Galbreath
Nicolas Bock
Justin Borodinsky
Sylvain Joubert
William Lynch
Clinton Stimpson
Christoph Grüninger
Tim Blechmann
Dmitry Polyanitsa
Kelly Thompson
Ruslan Baratov
Cedric Perthuis
David Demelier
Hannes Mezger
Christopher Dembia
Christoph Grüninger
Peter Collingbourne
Roger Leigh
Iosif Neitzke