The current file parser for a MUMPS routine uses a period "." as the
one of the signals that a line of MUMPS code is executable. This is not
a correct assumption. Add the period to the list of characters that CTest
will not consider the start of a line of code.
Update the test routine to have an entry point with code to match the scenario
mentioned above.
The generator name is "Xcode", not "XCode". Fix this typo. Explicitly
exclude the SubDirSpaces test on Xcode because it does not work. Also
tell the RunCMake.File_Generate test when Xcode is not multi-config so
it can exlcude the OutputConflict case.
Inspired-by: Daniele E. Domenichelli <daniele.domenichelli@iit.it>
Move the subtests that test with local projects into their own test. The reason
is that on slower or crowded machines the test may reach the limit of 25
minutes and therefore fail while it would pass if it was given enough time.
The split is roughly 3:1 with regard to the execution time, with the new
ExternalProjectLocal test being the faster one.
Add the ability to parse the XML output of the Jacoco tool.
Jacoco (www.eclemma.org/jacoco) is a Java coverage tool.
Add and integrate a class for the parser and
include a test which utilizes the new parser.
86be733f cmGeneratorExpression: Add workaround for Borland compiler
3495ab0a tests: update unused variable test expected output
2a1b2d84 backtrace: Convert to local paths in IssueMessage
a0829205 genex: remove the need for backtraces
efc20569 cmake: remove dummy backtraces for IssueMessage
d46c650d cmMakefile: return a backtrace
Add support for Cobertura coverage files written by Java.
Add a test which uses the report from a Java run of Cobertura to calculate coverage.
In the documentation of CTEST_COVERAGE_COMMAND, give a sample .sh file to merge
the Cobertura .ser files and generate the XML report from the merged file.
Write to the timeout test log file before sleeping and flush to be sure
it is created. Move the check that the after-sleep line is not written
out to the ctest script. Rename the CheckChild test to TestSleep since
it no longer checks. Do not try to read the log file if it does not
exist.
Fix the MUMPS coverage parser:
* Account for tabs after entry points
* Stop double incrementing lines that have explicit calls to the 0 line
* If a line has been previously marked as non executable, but then
contains a count, increment it an extra one to push it back into
the executable code set.
Add a custom routine and corresponding coverage files in the test case.
This file is smaller and has cmcov/mcov files that have data for only
that routine.
Provide a function to write a portable header to detect compiler
features. Generate a preprocessor #error for unknown compilers
and compiler versions whose features are not yet recorded. This
error condition might be relaxed in the future, but for now it
is useful for verification of expectations.
If creation of the global generator fails, return early with an error
message instead of trying to use the generator and crashing.
Add a CTestTestBadGenerator test to cover this case.
Reported-by: Mathieu Malaterre <malat@debian.org>
Bug-Debian: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=747306
This can be used to set the compiler features required by particular
targets. An error is issued at CMake time if the compiler does not
support the required feature. If a language dialect flag is required
by the features used, that will be added automatically.
Base the target_compile_features command on cmTargetPropCommandBase. This
gives us 'free' handling of IMPORTED, ALIAS, INTERFACE, non-compilable
and missing targets.
Record the availability of this feature for GNU 4.8 on (UNIX AND
NOT APPLE) only. In the future, availability can be recorded for
earlier GNU, for other platforms and for other compilers. Initially
the affected configurations are as restricted as possible to allow
for easy testing while extending the features vector in only one
dimension.
The error message when using the set_property API directly is not
very good, but follow up commits will provide origin debugging of
the property and a target_compile_features command which will
provide a configure-time backtrace when possible.
On OS X 10.9 the system libcurl has a different error message when
failing to connect:
Failed connect to :21; Connection refused
Match this message to pass the test.
Extend the cmGeneratorExpressionDAGChecker with an interface
returning the name of the top target. Use that to determine
when there is a DAG violation, as required by the RunCMake.Languages
tests.
Disallow the use of config-specific source files with
the Visual Studio and Xcode generators. They don't have
any way to represent the condition currently.
Use the same common-config API in cmQtAutoGenerators. While
it accepts config-specific files, it doesn't have to support
multiple configurations yet.
Loop over the configs in cmTargetTraceDependencies
and cmGlobalGenerator::WriteSummary and consume all source
files.
Loop over the configs in cmComputeTargetDepends and compute the
object library dependencies for each config.
b633b263 CPackWiX: Fix test to build with expected config
191f25e2 stringapi: Prevent a NULL dereference in WiX
219d6ad6 speedup: Avoid excess iterator dereferences
caaad357 speedup: Cache strings for comparisons
7abf4e31 stringapi: Use strings for dependency information
94fc63e2 stringapi: Use strings for cache iterator values
85fc9f26 stringapi: Command names
6557382d stringapi: Use strings for program paths
1a1b737c stringapi: Use strings for generator names
24b5e93d stringapi: Use strings for directories
11ed3e2c stringapi: Add string overload for the Def struct
b3bf31a5 stringapi: Miscellaneous char* parameters
5af95c39 typo: Match argument name with the header
2b17626e stringapi: Pass strings as install directories in CPack
3def29da stringapi: Use strings for feature arguments
acb116e3 stringapi: Return a string reference for the configuration
...
Since commit 71b14dcb (Utilities/Release: Do not upload doc staging
tarball, 2014-02-26) the prefix upload_release.cmake computes does not
match any files when used with -DVERSION=master as has been done for the
nightly binary builds. Since the version is not actually 'master'
anyway, change the nightly binary upload logic to explicitly pass the
destination directory. Do not pass any VERSION so the default is taken
and matches the binaries.
Add an undocumented CMake_TEST_EXTERNAL_CMAKE option to name an external
CMake 'bin' directory. Skip all main CMake binary builds and instead
configure the Tests directory to run using the external CMake provided.
This will provide a means to exercise the CMake test suite generating
for target platforms and compilers with which the CMake source does not
build. That will allow us to raise the level of C++ features required
of a compiler to build our source while retaining tests for generating
projects with older compiler tools.
In the ExportImport, Fortran, and MacRuntimePath tests the
CMAKE_TEST_MAKEPROGRAM variable is used to pass an explicit request for
a CMAKE_MAKE_PROGRAM value to be used when building the inner projects.
Rename these use cases to CMake_TEST_NESTED_MAKE_PROGRAM.
Follow the convention of naming variables related to the CMake build
itself as "CMake_" rather than "CMAKE_". While at it, consolidate the
code computing CMake_TEST_DEVENV to be more localized.
Drop the option to test with a different generator and make program than
was used to build. This was used only to test support for the Open
Watcom compiler which at one time could not build CMake. Instead we
will allow CMake to be configured to skip building binaries and just run
the test suite using an external CMake (in a future change).
For now leave the two option variables hard-coded to the old option
defaults until code can be updated to stop using them.
KWSys now has its own dashboard and test clients that run on all the
machines where we test CMake. We no longer need a test inside CMake to
test KWSys independently.
Commit 321e348e (QtAutogen: Use Qt 4 IMPORTED targets to find
executable locations., 2014-01-24) attempted to fix this problem,
but only solved it for a particular ordering of find_package for
Qt 4 and Qt 5.
Add a test to ensure that it works with both orderings.
The first regression resulted in endless looping due to unrun test
dependencies. The second regression prioritized all tests with dependencies
in serial test runs.
Commit b04f3b9a (Create make rules for INTERFACE_LIBRARY
targets., 2013-08-21) extended the makefile generator to create
build targets for INTERFACE_LIBRARY targets. No other generators
were extended with this feature.
This conflicts with the feature of whitelisting of target properties
read from INTERFACE_LIBRARY targets. The INTERFACE_* properties
of the INTERFACE_LIBRARY may legitimately contain TARGET_PROPERTY
generator expressions for reading properties from the 'head target'.
The 'head target' would be the INTERFACE_LIBRARY itself when creating
the build rules for it, which means that non-whitelisted properties
would be read.
Transitively consume the property from linked dependents.
Implement configuration-specific support by following the pattern
set out for compile definitions and includes in cmQtAutoGenerators.
Implement support for origin-tracking with CMAKE_DEBUG_TARGET_PROPERTIES.
This is motivated by the needs of KDE, which provides a separate
translation system based on gettext instead of the Qt linguist
translation system. The Qt uic tool provides command line options
for configuring the method used to translate text, and to add an
include directive to the generated file to provide the method.
http://thread.gmane.org/gmane.comp.kde.devel.frameworks/7930/focus=7992
Implement the interface to provide the uic options as a usage-requirement
on the KI18n target, as designed for KDE.
This variable can be useful in cross-compiling contexts where the
sysroot is read-only or where the sysroot should otherwise remain
pristine.
If the new CMAKE_STAGING_PREFIX variable is set, it is used instead
of CMAKE_INSTALL_PREFIX when generating the installation rules in
cmake_install.cmake.
This way, the CMAKE_INSTALL_PREFIX variable
always refers to the installation prefix on the target device, regardless
of whether host==target.
If any -rpath paths passed to the linker contain the CMAKE_STAGING_PREFIX,
the matching path fragments are replaced with the CMAKE_INSTALL_PREFIX.
Matching paths in the -rpath-link are not transformed.
The cross-prefix usr-move workaround is assumed not to require extension
regarding CMAKE_STAGING_PREFIX. The staging area is a single prefix, so
there is no scope for cross-prefix symlinks. The CMAKE_INSTALL_PREFIX
is still used to determine the workaround path, and that variable
remains the relevant one even if CMAKE_STAGING_PREFIX is used. If the
generated export files are deployed to the target, the workaround
will still be in place, and still be employed if required.
Pass the CMAKE_TEST_MAKEPROGRAM, if any, to each test at CMake time in
the CMAKE_MAKE_PROGRAM cache entry. Pass the CMAKE_TEST_MAKEPROGRAM
into the ExportImport, Fortran, and MacRuntimePath tests so that they
may do the same for the nested project configurations.
Now "ctest --build-and-test" can get the make program from the test
build tree cache, so drop the explicit --build-makeprogram.
Fix the condition that adds the test to check CMAKE_TEST_GENERATOR
rather than the tools used to build CMake. Drop the test on Ninja
because the generator does not support subproject generation anyway.
Stop using the general build_generator_args and pass the
--build-generator options explicitly. Also pass --build-makeprogram
explicitly when CMAKE_TEST_MAKEPROGRAM is available because there is no
CMakeCache.txt in the test project subdirectory from which to pick up
the make program.
Create a CTEST_TEST_DEVENV variable that is set to the
CMAKE_MAKE_PROGRAM used for Visual Studio 7, 8, and 9. It will always
be either "devenv" or "VCExpress", and not "MSBuild". Add the
VSExcludeFromDefaultBuild test only when this variable is set, and use
its value as the --build-makeprogram value.
More work will be needed later to restore the test on VS 10 and above
when devenv is available, but this is the simplest approach for now.
The test is only enabled on VS 10 and above, where the generators now
select for "ctest --build-and-test" the MSBuild tool by default.
Simplify the test configuration by dropping the --build-makeprogram
option and all the logic needed to compute its value. The test will
automatically use MSBuild.
Some extra options are for "ctest --build-and-test" directly, and others
are values for "--build-options". Split these two roles out into two
separate variables and update existing uses.
Run the bootstrap script through "cmake -P" instead of
"ctest --build-and-test" so that we do not need to abuse
the --build-makeprogram option of the latter.
Since commit 7d47c693 (Drop compatibility with CMake < 2.4, 2013-10-08)
we no longer need to use the configure_file IMMEDIATE option to support
compatibility modes less than 2.0.
Add a CMake.Copyright test that, when the CMake version number knows the
year (as it does in development versions), checks that Copyright.txt has
been updated with the current version year.
9c87d9c Add automatic rcc invocation for Qt.
84218e1 Add automatic uic invocation for Qt.
94a0ca6 Record which files are skipped by automoc.
18fb758 Run the main executable created in the autogen tests.
e485ba1 Rename the QtAutomoc tests to QtAutogen.
7ce65c3 Add extra checks for the AUTOMOC target property.
32771fc Update output messages for generic use.
f371ab5 Rename RunAutomoc to RunAutogen.
85b3d6e Extract an SetupAutoMocTarget method.
ca124a1 Rename the AutomocInfo.cmake file to be more generic.
a342c9f Move some makefile definitions up away from moc-specific code.
98632ef Add the AUTOGEN_TARGETS_FOLDER and obsolete AUTOMOC_TARGETS_FOLDER.
63378ba Rename some variables to reflect broader scope.
97f1aa3 Rename method to reflect generic use.
4abb111 Rename local variable to reflect generic use.
03878c9 Move variable set to where it is used.
...
ff59365 CTest: fix dashboard issues associated with the ctest-fix-run-serial topic
7a665ae CTest: added test for RUN_SERIAL issue #14484384beff CTest: added comments that describe the basic test sorting approach
adbe00d CTest: removed redundant copy of test dependency set
1b750cb CTest: perform cycle test early
6d4d7ca CTest: consider previously failed tests before all others
e809d8c CTest: prioritize tests by their depth in the dependency graph
44017a4 CTest: handle dependent and non dependent test requirements equally
Teach the ctest_update implementation to use the p4 command-line
client to perform updates and extract the list of changes.
Add a CTest.UpdateP4 test like those that exist already for the other
version control tools. Make the test available when p4 and the p4d
server are found. During the test launch p4d in the background to
serve a repository from the test directory. Then direct the client
toward this server for the duration of the test.
Don't try to show the windows, which would require a gui capable test
machine, and that's not guaranteed.
Automatically link to qtmain.a on Windows to avoid a policy warning. Set
policy CMP0020 to NEW by increasing the required version.
Don't attempt to run the test when using Windows.
The result is that the depends of the target are created.
So,
add_library(somelib foo.cpp)
add_library(anotherlib EXCLUDE_FROM_ALL foo.cpp)
add_library(extra EXCLUDE_FROM_ALL foo.cpp)
target_link_libraries(anotherlib extra)
add_library(iface INTERFACE)
target_link_libraries(iface INTERFACE anotherlib)
Executing 'make iface' will result in the anotherlib and extra targets
being made.
Adding a regular executable to the INTERFACE of an INTERFACE_LIBRARY
will not result in the executable being built with 'make iface' because
of the logic in cmComputeTargetDepends::AddTargetDepend.
So far, this is implemented only for the Makefile generator. Other
generators will follow if this feature is possible for them.
Make INTERFACE_LIBRARY targets part of the all target by default.
Test this by building the all target and making the expected library
EXCLUDE_FROM_ALL.
With our modern development workflow it is less likely a property will
be added to C++ code without documentation. This mode only existed to
support the DocTest which had very limited coverage of the properties
anyway.
This allows the use of the $<TARGET_FILE:...> generator expression as a
replacement for the use of the LOCATION target property. The use of the
LOCATION target property is now deprecated for in-build targets.
Also drop other checks for older CMake versions:
* Simplify cmake_set_target_folder macro.
* Use find_package(LibArchive) unconditionally.
* Simplify condition for running testVisualStudioSlnParser test.
* Convert two macros to functions.
* Unconditionally run the CTestTestRerunFailed test.
7efef02 FindGTK2: Add tests for components and targets in gtk and gtkmm modules
95fc47a FindGTK2: Make pangocairo and cairo optional dependencies
26f790f FindGTK2: Change extra includes -> optional
24e0272 FindGTK2: do not skip target creation if optional dependencies are not found
d5f130c FindGTK2: Refactor _GTK2_ADJUST_LIB_VARS into _GTK2_ADD_TARGET
fffbd72 FindGTK2: Do not add freetype includes if they are not found
b69720d FindGTK2: Add libraries to the GTK2_LIBRARIES variable only when found
425ec40 FindGTK2: Do not link libfreetype
e9f46df FindGTK2: Add config directories only if different from include ones
56a79e1 FindGTK2: Set INTERFACE_COMPILE_DEFINITIONS target property only if not empty
4b47586 FindGTK2: Add check to ensure that target exists
61242cc FindGTK2: Fix gmodule, glibmm, pangoft2, and pangoxft targets
4b876de FindGTK2: Link freetype libs to targets including freetype includes
67e761f FindGTK2: Small cleanup
682eea3 FindGTK2: Do not require the GTK_ prefix in all the internal functions
0bc3763 FindGTK2: Better handling of include directories
...
This assumes that coverage.py has been run in such a way to produce its
standard XML output. This uses the Cobertura schema and should be somewhat
generalizable.
Add a new command line argument to ctest. This allows users to
rerun tests that failed during the previous call to ctest. This
is accomplished by analyzing the most recently modified file named
"^LastTestsFailed*" in the Testing/Temporary subdirectory of the
project's binary directory.
This target type only contains INTERFACE_* properties, so it can be
used as a structural node. The target-specific commands enforce
that they may only be used with the INTERFACE keyword when used
with INTERFACE_LIBRARY targets. The old-style target properties
matching LINK_INTERFACE_LIBRARIES_<CONFIG> are always ignored for
this target type.
The name of the INTERFACE_LIBRARY must match a validity generator
expression. The validity is similar to that of an ALIAS target,
but with the additional restriction that it may not contain
double colons. Double colons will carry the meaning of IMPORTED
or ALIAS targets in CMake 2.8.13.
An ALIAS target may be created for an INTERFACE library.
At this point it can not be exported and does not appear in the
buildsystem and project files are not created for them. That may
be added as a feature in a later commit.
The generators need some changes to handle the INTERFACE_LIBRARY
targets returned by cmComputeLinkInterface::GetItems. The Ninja
generator does not use that API, so it doesn't require changes
related to that.
The lack of Qt4 on a system should silently skip the corresponding tests
with no other messages. This is already the case for other find_package
calls in Tests/CMakeLists.txt.
This is useful for cases like:
add_test(NAME mytest COMMAND mydriver $<TARGET_FILE:myexe>)
set_tests_properties(mytest PROPERTIES
REQUIRED_FILES "$<TARGET_FILE:myexe>"
WORKING_DIRECTORY "${CMAKE_CURRENT_BINARY_DIR}/$<CONFIGURATION>"
)
In this example we require the actual test executable to exist to
run the test in addition to the test driver at argv[0]. Also the
$<CONFIGURATION> expression improves over \${CTEST_CONFIGURATION_TYPE}
because the latter is not normalized for case-sensitive filesystems.
The Borland-built CTest binary has trouble running many instances of
itself in parallel, making the test unreliable. No particular recent
change appears to be the culprit and the failure is not reliably
reproducible. Just silence the failure for now by skipping the test.
* The ALIAS name must match a validity regex.
* Executables and libraries may be aliased.
* An ALIAS acts immutable. It can not be used as the lhs
of target_link_libraries or other commands.
* An ALIAS can be used with add_custom_command, add_custom_target,
and add_test in the same way regular targets can.
* The target of an ALIAS can be retrieved with the ALIASED_TARGET
target property.
* An ALIAS does not appear in the generated buildsystem. It
is kept separate from cmMakefile::Targets for that reason.
* A target may have multiple aliases.
* An ALIAS target may not itself have an alias.
* An IMPORTED target may not have an alias.
* An ALIAS may not be exported or imported.
This property replaces the properties which
match (IMPORTED_)?LINK_INTERFACE_LIBRARIES(_<CONFIG>)?, and is enabled
for IMPORTED targets, and for non-IMPORTED targets only with a policy.
For static libraries, the INTERFACE_LINK_LIBRARIES property is
also used as the source of transitive usage requirements content.
Static libraries still require users to link to all entries in
their LINK_LIBRARIES, but usage requirements such as INCLUDE_DIRECTORIES
COMPILE_DEFINITIONS and COMPILE_OPTIONS can be restricted to only
certain interface libraries.
Because the INTERFACE_LINK_LIBRARIES property is populated unconditionally,
we need to compare the evaluated result of it with the link implementation
to determine whether to issue the policy warning for static libraries. For
shared libraries, the policy warning is issued if the contents of
the INTERFACE_LINK_LIBRARIES property differs from the contents of the
relevant config-specific old LINK_INTERFACE_LIBRARIES property.
If the CTest make program is not msbuild we find the msbuild
corresponding to the current test generator. In the case of
VS 12 search for the msbuild it provides.
Even with the NMake Makefiles generator, it is not able to properly
clean up after the test.
http://open.cdash.org/testDetails.php?test=193424220&build=2934501
Internal cmake changing into directory: C:/Dashboards/My Tests/CMake-nmake10-x64-continuous/Tests/WarnUnusedCliUnused
Error: cmake execution failed
CMake Error: Error: generator : NMake Makefiles
Does not match the generator used previously: Visual Studio 10
Either remove the CMakeCache.txt file or choose a different binary directory.
It is common to specify a CMAKE_TOOLCHAIN_FILE and get a warning
for using it despite it not being used.
The WarnUnusedCliUnused test relies on the warning being emitted
each time cmake is run on an existing build. That behavior is changed
by this patch to warn only on the first invokation of CMake, and not
on subsequent invokations (because the variable is in the cache with
the same value). For that test, a clean target is added which clears
the cache and cause the warning to be emitted each time.
As the Ninja generator does not support the feature needed to test
this, it is not tested with that generator.
Checkout [1] as an example of the test failures. In that particular cases, the
failures is caused by the plus sign in the path being pass unescaped
(buildd-cmake_2.8.9-1~bpo60+1-armel-3Lvkef) to the regexp.
In addition to failures in the log, the following new tests also fail in 2.8.11:
243 - CTestTestMemcheckUnknown (Failed)
244 - CTestTestMemcheckUnknownQuoted (Failed)
248 - CTestTestMemcheckDummyValgrindFailPre (Failed)
249 - CTestTestMemcheckDummyValgrindFailPost (Failed)
250 - CTestTestMemcheckDummyPurify (Failed)
251 - CTestTestMemcheckDummyBC (Failed)
253 - CMake.List (Failed)
[1] https://buildd.debian.org/status/fetch.php?pkg=cmake&arch=armel&ver=2.8.9-1~bpo60%2B1&stamp=1369243896
dc1d025 OS X: Add test for rpaths on Mac.
8576b3f OS X: Add support for @rpath in export files.
00d71bd Xcode: Add rpath support in Xcode generator.
94e7fef OS X: Add RPATH support for Mac.
In Qt 5.1, Qt5::Core has a INTERFACE_QT_MAJOR_VERSION property
of '5', and since CMake 2.8.11, Qt4::QtCore has an
INTERFACE_QT_MAJOR_VERSION of '4'. This was introduced in
commit 4aa10cd6 (FindQt4: Set the INTERFACE_QT_MAJOR_VERSION for
Qt4::QtCore, 2013-03-16), to produce an error if Qt 4 and Qt 5
are erroneously used by the same target. This can also be used
however to determine the Qt major version, and therefore the
particular moc executable to use during automoc steps. This means
that targets in a single buildsystem can use a selection of Qt 4
and Qt 5, and still take advantage of the CMAKE_AUTOMOC feature
without conflicting.
6489015 Remove an endif() followed by an if() for the same condition.
e7813b1 Add a test for Qt5Automoc
27fb96b Make the QtAutomoc test compile with either Qt 4 or Qt 5
ac9a5f4 ctest_build: Pass projectDir to GenerateBuildCommand
a6c0299 CTest: Simplify ctest_* command source/build dir lookup
1ca9318 VS: Add test for building MSBuild project in subdir
3cd4000 VS: Use .sln parser to build targets in subdirs with msbuild (#13623)
df035e4 VS: Create parser for Visual Studio .sln files
de8be9e Add projectDir parameter to GenerateBuildCommand
Add support to maintain designer functionality for Visual Studio C++
Windows Forms projects. Also add a test project showing how to use
the CMakeLists.txt file and, when successfully configured, will allow
use of the designer for the included form.
This allows the ctest_build command's TARGET option to name a target
in a subdirectory and still build properly with msbuild.
Add test case covering use of ctest_build() with such a TARGET.
Add test covering cmGlobalGenerator::GenerateBuildCommand for VS
solutions with MSBuild and building a target defined in a subdirectory
and not part of ALL.
In particular, this checks that CTest's use of select() has a sufficient
file descriptor set size limit (FD_SETSIZE) to handle many child
processes at the same time. Running 20 tests requires more than 64
descriptors, the Cygwin default that we override.
Since commit e03f83f3 (ProcessorCount test: fix path to cmsysTestsCxx
executable, 2013-01-24) the directory references a target that is not
built when BUILD_TESTING is OFF. It makes no sense to add tests without
BUILD_TESTING anyway.
While at it, use add_subdirectory instead of subdirs to add CMakeTests.
Commit 79568f95 (automoc: Add source file to target early to set the
linker language, 2013-02-20) changed automoc initialization to a two
step process. In the first step, the generated source file was added
to the target, which allows the link language to be determined.
However, this bypassed the check for the availability of Qt itself.
At build-time the automoc file could not be generated because the moc
tool was not available to create it.
The solution is to only add the automoc file to the target if Qt is
found.
Extend the Module.ExternalData test to cover a DATA{} reference whose
name contains a space. Skip the case when the native build tool does
not support spaces.
Some make tools do not support spaces inside the source tree paths.
Decide early whether to add tests that depend on support for spaces so
we can use the result in a decision for any test.
All ctest --build-and-test invocations require the options
--build-generator ${CMAKE_GENERATOR}
--build-makeprogram ${CMAKE_TEST_MAKEPROGRAM}
to be passed and have consistent values, except for a few special cases.
Collect the generator options in a variable instead of repeating the
options everywhere explicitly.
5484c60 Merge branch 'vs6-rule-files' into add-ExternalData-module
1fd8d01 ExternalData: Attach download rules to content links in IDEs
a6d3ffc Fix Module.ExternalData test on VS 6
aed590a Fix Module.ExternalData test on Cygwin
06e8ded Merge branch 'fix-atomic-rename-on-Windows' into add-ExternalData-module
e2e0d2e ExternalData: Collapse ../ components in DATA{} paths
ee2abfd ExternalData: Add support for SHA 1 and 2 hash algorithms
aa8b228 ExternalData: Generalize hash algo/ext handling
9e518a8 ExternalData: Allow DATA{} syntax to reference directories
175ed02 ExternalData: Allow ()-groups in series match regex
4befecc ExternalData: Add tests covering interfaces and errors
bcd2580 ExternalData: Improve series matching using an explicit syntax
c0cebcb ExternalData: Remove unused private interface
5275993 ExternalData: Cleanup stray TODO and typo in comments
7bb8344 ExternalData: Do not match directory names when resolving DATA{}
00d801f ExternalData: Remove compatibility with CMake < 2.8.5
...
Run the test with the ctest --build-noclean option. The test
CMakeLists.txt file already uses file(REMOVE_RECURSE) to clean out
downloaded data anyway. Some file removed by "msdev ... /clean" causes
CMake to re-run in the middle of the build step and file(REMOVE_RECURSE)
wipes out already-generated files.
The test added by commit e378ba5f (Add CTestLimitDashJ test, 2012-12-26)
crashes with CTest compiled by Borland 5.8. There seems to be interaction
among the large number of internal ctest runs. It is probably related to
the undiscovered underlying issue mentioned in commit 32478069 (CTest:
Prevent creation of unbounded number of tests in ctest, 2012-12-18) when
fixing the symptom covered by the CTestLimitDashJ test.
Add --force-new-ctest-process to avoid the crash. Further investigation
will still be needed to identify the true problem.
Add a Module.ExternalData test to verify data retrieval and test
argument DATA{} references.
Add a RunCMake.ExternalData test to verify error handling and automatic
transformation of a raw data to a content link and staged object.
This means for example, that consumers can use:
target_link_libraries(foo ${QT_QTGUI_LIBRARIES})
instead of also needing to specify all 'public' dependencies:
target_link_libraries(foo ${QT_QTGUI_LIBRARIES} ${QT_QTCORE_LIBRARIES} )
when using the IMPORTED targets. Also populate the
IMPORTED_LINK_DEPENDENT_LIBRARIES property so CMake can help the linker
find shared library dependencies.
Add a test that verifies that when ctest -j 4 is called, at most, 4 tests
are executed at any one time.
The test works by running the same script as each of 100 tests. And then setting
up test properties for DEPENDS, RUN_SERIAL, PROCESSORS and COST in order to get
the tests to run in a semi-deterministic ordering, even in parallel. The script
writes a file, sleeps for a bit, and then deletes the file. In the meantime, it
counts files that currently exist, and emits output that triggers a test failure
if the count of files is ever greater than 4.
Prior to the commit that fixed bug #12904, this would result in a failed test
because the output of some of the tests would indicate that more than 4 tests
were running simultaneously.
Now that this issue is resolved, this test will help guarantee that it stays
resolved moving forward.
This new CPack generator produces an *.msi installer file.
Requires having the WiX Toolset installed in order to work
properly.
Download the WiX Toolset installer "WiX36.exe" here:
http://wix.codeplex.com/releases/view/93929
These tests were not running properly on Visual Studio or
Xcode dashboards before this commit because of the "Debug"
or "Release" sub-directory. The scripts already have
CMAKE_CPACK_COMMAND since the correct CMake executable is
used to run the scripts, so just use that, rather than
passing down an incorrect path to the CPack executable.
a41d3a4 ExternalProjectUpdateTest: Only support Git 1.6.5 and greater.
de760c1 ExternalProject: Verify when a fetch occurs during update test.
0a34433 ExternalProject: Make sure the ExternalProjectUpdate setup is available.
9b66c8f ExternalProject: Always do a git fetch for a remote ref.
2619f4d ExternalProject: Add tests for UPDATE_COMMAND.
378aa12 ExternalProject: Do smoke tests for Git Tutorial builds.
d075829 ExternalProject: Only run 'git fetch' when required.
This prepares the numberous tests that occur in the ExternalProjectUpdate
test. The tests were passing previously because a fresh build was not performed.
Tests are added for UPDATE_COMMAND to ensure it is working properly. Testing
infrastructure is added along with tests for Git, but tests for other version
control systems could easily be added in the future.
995a35f CTest: add a check with a quoted memory checker
de8bffc CTest: add a test for CTEST_CUSTOM_MEMCHECK_IGNORE
d26c9b6 CTest: improve memory checker type detection
fcae1da CTest: add tests that simulate memcheck runs
6187876 CTest: fix pre and post test commands with spaces
95bc8aa CTest: fix usage of memory checker with spaces in path
Move it out of the condition that also accepts MinGW/MSYS.
Teach the test to allow the Intel for Windows compiler but
do not verify the results because the compiler does not
seem to write PDB output in all cases.
This enables changing the name and output folder of the debug symbol
files produced by MS compilers.
Inspired-by: Thomas Bernard <thomas.bernard@ipetronik.com>
f0a1065 Rename files from main.cpp to more meaningful names.
ca7fb14 Fix the test setting COMPILE_DEFINITIONS target property
733deb6 Fix CompileDefinitions test on Visual Studio.
3dae652 Don't duplicate -D defines sent to the compiler.
There is no need to do so. Be consistent with include directories and
ensure uniqueness.
This requires changing the API of the cmLocalGenerator::AppendDefines
method, and changing the generators to match.
The test unfortunately can't test for uniqueness, but it at least verifies
that nothing gets lost.
Add generator expressions that combine and use boolean test results:
$<0:...> = empty string (ignores "...")
$<1:...> = content of "..."
$<AND:?[,?]...> = '1' if all '?' are '1', else '0'
$<OR:?[,?]...> = '0' if all '?' are '0', else '1'
$<NOT:?> = '0' if '?' is '1', else '1'
These will be useful to evaluate (future) boolean query expressions and
condition content on the results. Include tests and documentation.
After conversion of Modules .cmake files to lower case the
FAIL_REGULAR_EXPRESSION for this test matched warnings in modules other
than the test line itself. Make the pass and fail regular expressions
specific to the file containing the lines they are testing.
Ancient versions of CMake required else(), endif(), and similar block
termination commands to have arguments matching the command starting the
block. This is no longer the preferred style.
Run the following shell code:
for c in else endif endforeach endfunction endmacro endwhile; do
echo 's/\b'"$c"'\(\s*\)(.\+)/'"$c"'\1()/'
done >convert.sed &&
git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' |
egrep -z -v '^(Utilities/cm|Source/kwsys/)' |
egrep -z -v 'Tests/CMakeTests/While-Endwhile-' |
xargs -0 sed -i -f convert.sed &&
rm convert.sed
1fc8df9 Add missing this->.
7a3ecf5 Fix memory leak in Makefile generator.
9f7dc83 Ninja: also bootstrap ninja files
5d365b2 Ninja: enable ninja support everywhere
d569f3e Ninja: void function can't return a value
52160bf Ninja: enable ninja on Mac so all Mac CDash-builds are tested, cleanup later
56aeac6 Ninja: fixes for bcc
7a6bc9e Ninja: remove 'this' from member initializer list
44ba4cf Ninja: remove warnings
7751966 Ninja: remove 'friend' in ninja code
c3988ee Re-factor OS X content generator start up.
f8e0a51 Re-factor framework directory computation.
f36c7b0 Re-factor Mac OS X content directory computation.
5d885db Re-factor bundle content copying rules generation.
3b2a01e Ninja: Use same echo message as makefiles.
7bb56c5 Re-factor CFBundle generation.
...
b47cffa CPack: Use bin subdir when looking for dpkg and rpmbuild
a8c659c Find dpkg and rpmbuild in usual Fink and MacPort paths
848f220 Do not run cpack at CMake time it is not available.
cpack was used to get the list of available i.e. ACTIVE CPack generators
in the CMake tests suite. This was done in order to get dynamically
available CPack generators like DEB or RPM that may or may not be
available on some platform like MacOSX depending on the fact that
some command are installed or not. We may do that but not during
initial configuration.
The current patch fixes the problem and we may do better in the future
like configuring CPack tests later.
bd34963 Refactor generation of shared library flags
55d7aa4 Add platform variable for flags specific to shared libraries
31d7a0f Add platform variables for position independent code flags
CMAKE_SHARED_LIBRARY_<lang>_FLAGS has flags on various platforms for a
variety of purposes that are correlated with shared libraries but not
exclusive to them. Refactor generation of these flags to use new
purpose-specific platform variables
CMAKE_<lang>_COMPILE_OPTIONS_DLL
CMAKE_<lang>_COMPILE_OPTIONS_PIC
CMAKE_<lang>_COMPILE_OPTIONS_PIE
Activate the DLL flags specifically for shared libraries. Add a new
POSITION_INDEPENDENT_CODE target property to activate PIC/PIE flags, and
default to true for shared libraries to preserve default behavior.
Initialize the new property from CMAKE_POSITION_INDEPENDENT_CODE to
allow easy global configuration in projects.
Although the default behavior is unchanged by this refactoring, the new
approach ignores CMAKE_SHARED_LIBRARY_<lang>_FLAGS completely. We must
leave it set in case projects reference the value. Furthermore, if a
project modifies CMAKE_SHARED_LIBRARY_<lang>_FLAGS it expects the new
value to be used. Add policy CMP0018 to handle compatibility with
projects that modify this platform variable.
Add a PositionIndependentCode test on platforms where we can get
meaningful results.
More generally add the check for possible generator "activation" at
runtime depending on a generator specific check.
The dynamic behavior is currently implemented only for MacOS
and should be fully backward compatible for other system.
Inspired-By Tom Hughes <tomtheengineer@gmail.com>
Add "ObjectLibrary" test to build and use OBJECT libraries. Build
multiple object libraries in separate directories with different flags.
Use a custom command to generate a source file in one OBJECT library.
Reference the OBJECT libraries for inclusion in a STATIC library, a
SHARED library, and an EXECUTABLE target. Use the static and shared
libraries each in executables that end up using the object library
symbols. Verify that object library symbols are exported from the
shared library.
The CMakeCommands.build_command test performs output/error checking
so move it over to RunCMake to re-use the generalized infrastrucure.
This is the only test left using Tests/CMakeCommands/CMakeLists.txt
so remove it.
The CMakeOnly directory added by commit 9a20abf0 (Add infrastructure for
CMake-only tests, 2012-01-11) was sufficient only for tests that always
run CMake to successfully configure a project. Later commit eeaaffcb
(find_package: Test error and warning messages in failure cases,
2012-02-28) added a sample test that covers failure cases.
Generalize the above to create new "RunCMake" test infrastructure that
can run CMake multiple times for a single project with different
variations and check for expected result/stdout/stderr. Allow for both
successful and failing CMake project configuration cases. This will be
useful to test error messages and failure behavior.
b28e7fa VS6: Avoid SBCS test on VS6 (#12189)
df19b9c VS6: Avoid _MBCS define when _SBCS is defined (#12189)
ba89e92 Visual Studio: Allow setting Single Byte Character Set (#12189)
The previous commit, df19b9ca, assumed that the corresponding
_UNICODE functionality in the VS6 generator actually worked.
That turns out not to be the case. Unicode definition does not
actually suppress _MBCS definition, so neither does this new
code...
Don't test it here, since the patch submitter for _SBCS does
not need VS6 support.
If somebody needs _UNICODE and _SBCS support to suppress the
definition of _MBCS in the VS6 generator, it is work yet to do.
Patches welcome.
4689eed reflect that the QtAutomoc depends on QtGui
ab9661c Remove QtGui dependency in Qt4Deploy test and verify QtSql existance.
52e8279 Fix for Qt4Deploy on some test machines.
672e3bb Add test for DeployQt4.cmake
4853e1e Fix plugin installation issues.
35cbf23 Ensure libs are passed to BundleUtilities.
0ac1535 Fix bad plugin paths.
a2123e8 Fix mismatched arguments.
fc6f340 Don't use QT_LIBRARIES_PLUGINS by default.
${CMake_SOURCE_DIR} and ${CMake_BINARY_DIR} cannot be embedded into regex
directly. If they contain special regex metacharacters like +, the regex
will break. So just escape such metacharacters with a backslash before
embedding the path into the regex.
The issue affected the following tests: CTestTestConfigFileInBuildDir1 and
CTestTestConfigFileInBuildDir2.
Brad King
Joseph Snyder
Rolf Eike Beer
Ben Boeckel
Nils Gladitz
Stephen Kelly
Alex Ciobanu
Daniele E. Domenichelli
Pedro Navarro
Patrick Reynolds
Zack Galbreath
Ben Boeckel
Patrick Gansterer
Modestas Vainius
Clinton Stimpson
John Farrier
Petr Kmoch
Paul Kunysch
Michael Tänzer
David Cole
Nils Gladitz
Matt McCormick
Yuchen Deng
Alex Neundorf
Marcin Wojdyr
Kitware Robot
Nicolas Despres
Eric NOULARD
Bill Hoffman