Extend the cmGlobalGenerator::GenerateBuildCommand virtual method
signature with a "projectDir" parameter specifying the top of the
project build tree for which the build command will be generated.
Populate it from call sites in cmGlobalGenerator::Build where a
fully-generated build tree should be available.
Commit 79568f95 (automoc: Add source file to target early to set the
linker language, 2013-02-20) changed automoc initialization to a two
step process. In the first step, the generated source file was added
to the target, which allows the link language to be determined.
However, this bypassed the check for the availability of Qt itself.
At build-time the automoc file could not be generated because the moc
tool was not available to create it.
The solution is to only add the automoc file to the target if Qt is
found.
Previously, GetIncludeDirectories was called before calling
target->AddSourceFile(mocCppSource). Since commit a1c4905f (Use the
link information as a source of compile definitions and
includes., 2013-02-12), the include directories are determined by
the link information.
Valid link information requires that the linker language can be
determined, which depends on the source files languages and the
dependent targets languages. In the case of the no_link_languages
target in the unit test, there are no dependencies and the additional
source file no_link_languages_automoc.cpp is added to the target
at generate-time. That file can be used to determine the linker
language, but it must be added to the target before calling
GetIncludeDirectories.
Reject the option by default. It will be implemented on a per-generator
basis. Pass the setting into try_compile project generation. Add cache
entry CMAKE_GENERATOR_TOOLSET and associated variable documentation to
hold the value persistently.
Add a RunCMake.GeneratorToolset test to cover basic "-T" option cases.
Verify that CMAKE_GENERATOR_TOOLSET is empty without -T, that -T is
rejected when the generator doesn't support it, and that two -T options
are always rejected.
6063fef Output include directories as LOG messages, not warnings.
aa66748 Specify the target whose includes are being listed.
d70204a Only output includes once after the start of 'generate-time' when debugging.
0d46e9a Store includes from the same include_directories call together.
During configure-time, GetIncludeDirectories may be called too, for example
if using the export() command. As the content can be different, it should
be output each time then.
This makes
set(CMAKE_BUILD_INTERFACE_INCLUDES ON)
add the equivalent of
set_property(TARGET tgt APPEND PROPERTY
INTERFACE_INCLUDE_DIRECTORIES
$<BUILD_INTERFACE:${CMAKE_CURRENT_SOURCE_DIR};${CMAKE_CURRENT_BINARY_DIR}>
)
to every target.
If the headers are in CMAKE_CURRENT_SOURCE_DIR, and the generated headers
are in CMAKE_CURRENT_BINARY_DIR, this is a convenient way to build a target
bar, which depends on foo, just by using target_link_libraries() and adding
the INTERFACE_INCLUDE_DIRECTORIES to the INCLUDE_DIRECTORIES of the target
being linked. There will be more-convenient porcelain API to consume the
property in the future.
Solution folders are supported as read-only in the VS11 Express
Edition, so do not prohibit their use just because we detect the
express edition (as we did in the VS10 generator).
Inspired-by: Paris
75ebebc VS: Remove platform specific generator files
8b62080 VS: Remove EnableLanguage from platform-specific generators
5bdf011 VS: Remove GetPlatformName from platform-specific generators
8d42ab4 VS: Fix ArchitectureId of Visual Studio 10 IA64 generator
6f439b3 VS: Remove AddPlatformDefinitions from platform-specific generators
5170a88 Make cmGlobalGenerator::GetDocumentation() a static function
04ff866 Allow a GeneratorFactory handling of more than one generator
984ebc3 Search generator in cmake::ExtraGenerators before in cmake::Generators
30a6950 Add cmGlobalGeneratorFactory::GetGenerators()
e8f8414 Introduce the abstract class cmGlobalGeneratorFactory
Since commit ca39c5cd (Optionally allow IMPORTED targets to be globally
visible, 2012-01-25) cmGlobalGenerator has a second member that tracks
targets with global scope. We must initialize the new 'ImportedTargets'
member wherever the old 'TotalTargets' member is initialized. Without
this initialization the ImportedTargets member is left with dangling
pointers during a same-process re-configuration.
We're going to need to link to them, and all the linking API is moving
to cmGeneratorTarget.
Skip imported targets when iterating over cmGeneratorTargets in places
where we only want targets we build. The GetGeneratorTargets result now
includes IMPORTED targets where it didn't before. The GetTargets
result, which was what used to be called in these methods does not
include IMPORTED targets. This doesn't relate to any known bugs, but in
some future uses of GetGeneratorTargets it will be important, so
starting the convention and being deliberate now is a good idea.
This fixes a regression introduced in commit 290e92ad (Move
GetIncludeDirectories to cmGeneratorTarget, 2012-09-16) which loops over
cmGeneratorTargets before they get created, so the container is empty.
4ad0233 Remove period at the end of the check message.
50b1ea5 Fix minor typos.
19c3206 Remove unused parameter marker and the unused parameter.
9d462b2 Document that generator expressions can be used in target properties.
daf88c3 Fix punctuation in some variables documentation.
3172cde Fix the layout of the generator expression documentation.
This way we don't need to check the definitions from the Makefile when
generating later, and can more easily add generator expressions.
Duplication is not a problem as the definitions are de-duplicated before
generating.
At the top of a build tree we configure inside the CMakeFiles directory
files such as "CMakeSystem.cmake" and "CMake<lang>Compiler.cmake" to
save information detected about the system and compilers in use. The
method of detection and the exact results store varies across CMake
versions as things improve. This leads to problems when loading files
configured by a different version of CMake. Previously we ignored such
existing files only if the major.minor part of the CMake version
component changed, and depended on the CMakeCache.txt to tell us the
last version of CMake that wrote the files. This led to problems if the
user deletes the CMakeCache.txt or we add required information to the
files in a patch-level release of CMake (still a "feature point" release
by modern CMake versioning convention).
Ensure that we always have version-consistent platform information files
by storing them in a subdirectory named with the CMake version. Every
version of CMake will do its own system and compiler identification
checks even when a build tree has already been configured by another
version of CMake. Stored results will not clobber those from other
versions of CMake which may be run again on the same tree in the future.
Loaded results will match what the system and language modules expect.
Rename the undocumented variable CMAKE_PLATFORM_ROOT_BIN to
CMAKE_PLATFORM_INFO_DIR to clarify its purpose. The new variable points
at the version-specific directory while the old variable did not.
When a language is not enabled at the top level of a project but is
enabled in multiple disjoint subdirectories we should re-use the
CMake<lang>Compiler.cmake file from the first directory. Load the file
whenever it exists and is not left from a different version of CMake.
bd34963 Refactor generation of shared library flags
55d7aa4 Add platform variable for flags specific to shared libraries
31d7a0f Add platform variables for position independent code flags
CMAKE_SHARED_LIBRARY_<lang>_FLAGS has flags on various platforms for a
variety of purposes that are correlated with shared libraries but not
exclusive to them. Refactor generation of these flags to use new
purpose-specific platform variables
CMAKE_<lang>_COMPILE_OPTIONS_DLL
CMAKE_<lang>_COMPILE_OPTIONS_PIC
CMAKE_<lang>_COMPILE_OPTIONS_PIE
Activate the DLL flags specifically for shared libraries. Add a new
POSITION_INDEPENDENT_CODE target property to activate PIC/PIE flags, and
default to true for shared libraries to preserve default behavior.
Initialize the new property from CMAKE_POSITION_INDEPENDENT_CODE to
allow easy global configuration in projects.
Although the default behavior is unchanged by this refactoring, the new
approach ignores CMAKE_SHARED_LIBRARY_<lang>_FLAGS completely. We must
leave it set in case projects reference the value. Furthermore, if a
project modifies CMAKE_SHARED_LIBRARY_<lang>_FLAGS it expects the new
value to be used. Add policy CMP0018 to handle compatibility with
projects that modify this platform variable.
Add a PositionIndependentCode test on platforms where we can get
meaningful results.
Add cmGlobalGenerator::GenerateRuleFile to compute a generator-specific
rule file location. This will allow specific generators to override the
location of .rule files without changing the behavior of other
generators.
Rename cmGlobalGenerator::GetCMakeCFG{InitDirectory => IntDir} to
have a shorter name without a typo. Add a 'const' qualifier since
the method is only for lookup and never needs to modify anything.
Add a virtual cmGlobalGenerator::ComputeTargetObjects method invoked
during cmGeneratorTarget construction. Implement it in the Makefile
generator to pre-compute all object file names for each target. Use
the results during generation instead of re-computing it later.
Construct the instances after the final set of targets is known but
before computing inter-target dependencies. This order will allow
initialization of cmGeneratorTarget instances to adjust and finalize
declared inter-target dependencies.
Eliminate callers of cmMakefile::GetIncludeDirectories.
All callers of GetIncludeDirectories should go through the local generator
object.
Only the local generator calls cmTarget::GetIncludeDirectories directly.
Consider the case motivating commit e01cce28 (Allow add_dependencies()
on imported targets, 2010-11-19). An imported target references a file
generated at build time by a custom target on which it depends. Had the
file been built directly using add_library or add_executable its target
name would have been visible globally. Therefore the imported target
representing the file should be globally visible also.
Teach the IMPORTED signature of add_(executable|library) to accept a new
"GLOBAL" option to make the imported target visible globally.
59238dc Fix --find-package mode on Cygwin, where enable_language(RC) is called
98472e4 Require the current cmake version in --find-package mode
a6ccf3c Use $(CXXFLAGS) and $(LDFLAGS) in the --find-package test Makefile
4386918 Fix line length
7d69310 Only enable the test when using GNU make
3011149 Make the test harder by always having a space in the include dirs
ab57ff6 Make the --find-package test harder
626fc71 Much improved test, should now be executed on all UNIXes
ec6982d Disable any STATUS output in --find-package mode
e552ae7 Dont check for -isysroot and -mmacosx-version on OSX in --find-package mode
e589589 Rename helper macros print_compile_flags() to set_compile_flags_var()
aecfc1f Fix test on OpenBSD with BSD make
6bb4ca3 The makefile for the test was kindof wrong
fd15b5e Only run the test if we are using a makefile generator under UNIX
9fc87c6 Add a test for the new --find-package mode
d3ae0ff Improve documentation for --find-package mode
bf07375 Add a cmake.m4 for using cmake in autoconf projects instead of pkgconfig
b0e3578 Use the file-utility to test for 64bit if there is no /usr/lib64
53edfb2 Better support for lib64 and Debian multiarch
b8fdaa1 Fix copyright notice in new CMakeFindPackageMode.cmake
7690edf Replace cmake::GetScriptMode() with GetWorkingMode()
e4f603b Implement find-package mode of cmake
a91d662 Add find-package mode, which does nothing yet
b976e70 Make clLocalGenerator::GetTargetFlags() public
Brad King
Andreas Mohr
Petr Kmoch
Stephen Kelly
Peter Kümmel
Yury G. Kudryashov
David Cole
Patrick Gansterer
Alex Neundorf
Peter Collingbourne