Fix generation of tgt/fast build targets.
Commit 363caa2f (cmLocalGenerator: De-virtualize Configure().,
2015-05-30) moved the computation of HomeRelativeOutputPath from
Configure-time to Generate-time, because it is only used at
Generate-time. However, that commit caused the member for one
local generator to be computed immediately before generating with
that local generator, whereas previously the members of all local
generators were computed before generating any of them.
The HomeRelativeOutputPath is used by the GetRelativeTargetDirectory
method, which is called by the
cmGlobalUnixMakefileGenerator3::WriteConvenienceRules method. That
method is called by the
cmLocalUnixMakefileGenerator3::WriteLocalMakefile method when generating
for the top-most (ie, the first) local generator. At that point,
the HomeRelativeOutputPath is not yet computed.
Fix that by computing the member just before generating anything.
This will eventually be done in the cmLocalUnixMakefileGenerator3
constructor instead, but further refactoring is needed to make
that possible.
The chaining logic doesn't belong to the container, and the
CMakeInstance pointer doesn't need to be in cmPropertyMap.
Size goes from 56 to 48 bytes with GNU libstdc++-5.1.
7657e8b1 cmMakefile: Introduce a local cmMakefile variable.
4e8f242d cmMakefile: Store unconfigured cmMakefiles.
d65e0123 cmMakefile: Implement ConfigureSubDirectory in terms of cmMakefile.
f059ed16 cmMakefile: Move Configure responsibility from cmLocalGenerator.
a653611d cmake: Replace CurrentLocalGenerator concept with CurrentMakefile.
69a038a9 cmMakefile: Refactor directories specified with the subdirs command.
08637970 cmLocalGenerator: ComputeObjectMaxPath just before generating.
27e11c6f Merge Configure state with GeneratingBuildSystem state.
363caa2f cmLocalGenerator: De-virtualize Configure().
Refactor the local generator creation API to accept a
cmState::Snapshot. Adjust MakeLocalGenerator to use the 'current'
snapshot in cases where there is no parent. Create the snapshot
for subdirectories in cmMakefile::AddSubdirectory.
This means that snapshots are now created at the point of extending the tree,
as appropriate, and independently of the cmLocalGenerator and cmMakefile they
represent the state for.
d7923b82 Use std::unordered_map instead of hash_map where available.
820777af Tests: Don't rely on ordering of targets in maps.
921d74d8 AutoGen: Don't iterate over a container while populating it.
The InitializeAutogenTarget creates new targets and adds them to the
Targets container on the makefile. In this method, we have a reference
to that container and we are iterating over it. That happens to work
with hash_map, but it fails with undefined behavior when using the
std::unordered_map from libstdc++-4.9 (and likely others).
Revert the refactoring by commit v2.8.11~105^2~1 (Ninja: use MinGW
generator code in EnableLanguage, 2013-03-09) and move the MinGW-
specific logic back to the "MinGW Makefiles" generator. Instead teach
the platform information modules for GNU and MSVC on Windows to set the
preferred RC compiler just before enabling the RC language. This way
we choose the RC compiler based on the C/C++ toolchain that is actually
enabled.
In commit 74de9a73 (cmGlobalGenerator: Delegate storage of enabled
languages to cmState, 2015-04-11) the original LanguageEnabled
member of cmGlobalGenerator was left behind by mistake. One use
of it in EnableLanguagesFromGenerator (for try_compile) was left,
but the member is not populated anymore. Drop the member and
teach EnableLanguagesFromGenerator to copy the list of enabled
languages from one cmState to the other.
Reported-by: Matt McCormick <matt.mccormick@kitware.com>
8dc3a67c cmMakefile: Out-of-line the directory methods.
0f3c8cfa cmMakefile: Use method abstraction to access directories.
b288a997 cmMakefile: Rename SetStart* directory API to SetCurrent*.
932d53bc cmMakefile: Remove redundant method duplication.
32b8f03a cmMakefile: Port users of GetStart* methods to new names.
54d6a918 cmMakefile: Rename GetCurrent{Output,Binary}Directory.
55d80d0a cmMakefile: Rename GetCurrent{,Source}Directory.
b23cf06f cmake: Remove redundant start directories.
fcf246ac cmMakefile: Populate Home directories on initialize.
8878bea7 cmake: Initialize Home directories on cmake for find-package mode.
044dc815 Use the Home directories from the cmake class where intended.
d67e8f24 cmake: Fix directory used to find the cache
1ea085d1 cmMakefile: Initialize dir definitions early.
f034bb2f Remove redundant calls to MakeStartDirectoriesCurrent.
3a68c323 cmMakefile: Fix wrong parameter names.
Extend the RunSingleCommand signature to capture stdout and stderr
separately. Allow both to be captured to the same std::string
to preserve existing behavior. Update all call sites to do this
so that this refactoring does not introduce functional changes.
This topic was never tested without some follow-up commits. The
GetCacheEntryValue API returns a pointer to memory freed on return.
It will have to be revised along with the rest of the original topic.
VCExpress does not produce output if its pipes are connected to
an interactive terminal. Add a special case to 'cmake --build'
to capture the output through a pipe and re-print it instead of
sharing output pipes with VCExpress.
The Ninja build system does not support a in-file verbositiy switch.
Instead teach 'cmake --build' to extract the CMAKE_VERBOSE_MAKEFILE
setting and pass it as an optional '-v' argument to Ninja. This can
serve as a reasonable fallback.
Signed-off-by: Gregor Jasny <gjasny@googlemail.com>
Port some existing cmJoin to use it.
cmJoin is cumbersome to use in cases where the objective is to
somehow 'quote' each item and then join it with a separator. In that
case, the joiner string is harder to read and reason about. cmWrap
aims to solve that.
Provide an overload taking char wrappers to simplify the case
of surrounding every element in quotes without needing to escape
the quote character.
This reverts commit ae6fc555a7.
Use the more-natural make_pair algorithm. The compiler motivating
the need for this is not supported as a host anymore.
The "cmakexbuild" wrapper is not needed for Xcode 4 and above, and the
path to it may change when CMake moves. Avoid storing a specific path
to a build program in CMakeCache.txt and instead compute the value for
CMAKE_MAKE_PROGRAM on demand. However, if a user does set the value
explicitly then honor it.
This does for Xcode what commit v3.0.0-rc1~260^2~4 (VS: Switch to
internal CMAKE_MAKE_PROGRAM lookup by generators, 2013-11-15) did for
Visual Studio generators.
This will make them use the 'console' pool with the Ninja generator.
Impacted targets are:
- Built-in targets: install, install/local, install/strip, tests,
package, package_source, rebuild_cache
- Targets provided by the CTestTargets module: Nightly, Continuous,
Experimental,
and all their variants (*Start, *Configure, ...)
In each internal target directory we generate a "Labels.txt" file
containing labels for that target and its sources, but it uses an
internal format. In order to make the list of labels easier to
publish, use a json format and call it "Labels.json".
Since we now use jsoncpp headers, link CMakeLib to the jsoncpp library.
We use cmGlobalGenerator::GetDirectoryContent to avoid repeating
directory listings. However, GetDirectoryContent loads content from
disk at most once. This breaks find_library calls that occur when disk
content has changed since preceding find_library calls.
Teach cmGlobalGenerator::GetDirectoryContent to save the directory
modification time when content is loaded and re-load content if it
changes.
Create a RunCMake.find_library test with a case covering this.
A common idiom in CMake-based build systems is to have custom commands
that generate files not listed explicitly as outputs so that these
files do not have to be newer than the inputs. The file modification
times of such "byproducts" are updated only when their content changes.
Then other build rules can depend on the byproducts explicitly so that
their dependents rebuild when the content of the original byproducts
really does change.
This "undeclared byproduct" approach is necessary for Makefile, VS, and
Xcode build tools because if a byproduct were listed as an output of a
rule then the rule would always rerun when the input is newer than the
byproduct but the byproduct may never be updated.
Ninja solves this problem by offering a 'restat' feature to check
whether an output was really modified after running a rule and tracking
the fact that it is up to date separately from its timestamp. However,
Ninja also stats all dependencies up front and will only restat files
that are listed as outputs of rules with the 'restat' option enabled.
Therefore an undeclared byproduct that does not exist at the start of
the build will be considered missing and the build will fail even if
other dependencies would cause the byproduct to be available before its
dependents build.
CMake works around this limitation by adding 'phony' build rules for
custom command dependencies in the build tree that do not have any
explicit specification of what produces them. This is not optimal
because it prevents Ninja from reporting an error when an input to a
rule really is missing. A better approach is to allow projects to
explicitly specify the byproducts of their custom commands so that no
phony rules are needed for them. In order to work with the non-Ninja
generators, the byproducts must be known separately from the outputs.
Add a new "BYPRODUCTS" option to the add_custom_command and
add_custom_target commands to specify byproducts explicitly. Teach the
Ninja generator to specify byproducts as outputs of the custom commands.
In the case of POST_BUILD, PRE_LINK, and PRE_BUILD events on targets
that link, the byproducts must be specified as outputs of the link rule
that runs the commands. Activate 'restat' for such rules so that Ninja
knows it needs to check the byproducts, but not for link rules that have
no byproducts.
The special case added by commit v2.4.0~3051 (When building CMake
itself, use the new cmake to install so that the current cmake can be
overwritten, 2004-06-09) does not make sense when cross-compiling.
The evaluation files must be known before cmTargetTraceDependencies
attempts to find them, but we must actually generate the files after
cmTargetTraceDependencies, as that can add to target SOURCES. The
limitation is that the generated output name must not depend on the
SOURCES of a target if the generated file is used by that target.
Mark the output files as GENERATED so that trace dependencies does
not expect them to already exist in the filesystem.
Move the invokation of ForceLinkerLanguage in the Generate logic
to after the generated file names are known. ForceLinkerLanguage
tries to determine the sources of a target (in order to determine
an already-known language) and otherwise fails to get information
about the generated file.
Test that the output of file(GENERATE) can be used as a target source
file and that accessing the target SOURCES in the name of the output
file is an error. Accessing the TARGET_OBJECTS would be a similar
error if it was legal to use that generator expression in this
context. That is not currently possible and is a different error
condition, so test the current error output as a reminder to change
the expected output if that becomes possible in the future. Test
that generated rule files resulting from cmTargetTraceDependencies
appear in the SOURCES generated in the output file.
Visual Studio 12 (2013) deprecated GetVersionEx:
warning C4996: 'GetVersionExW': was declared deprecated
in favor of either "versionhelpers.h" or VerifyVersionInfo, neither of
which exist in some of the older compilers we support. Rather than
try to port conditionally to VerifyVersionInfo, simply suppress the
warning for now.
In cmGlobalGenerator::EnableLanguage, fix error messages for missing
module files to actually name the missing module instead of using the
empty string returned by GetModulesFile.
Call SetSystemName, SetGeneratorPlatform, and SetGeneratorToolset
exactly once after reading CMakeSystem.cmake, and not again on another
call to enable_language() or project().
Reject the option by default. It will be implemented on a per-generator
basis. Pass the setting into try_compile project generation. Add cache
entry CMAKE_GENERATOR_PLATFORM and associated variable documentation to
hold the value persistently.
Add a RunCMake.GeneratorPlatform test to cover basic use cases for the
option. Verify that CMAKE_GENERATOR_PLATFORM is empty by default, and
that it is rejected when the generator does not support a user setting.
Move handling of an empty toolset name into the implementation of the
method. This simplifies the VS 10 implementation of default toolset
selection because it has one code path that is always called.
The implementation of CMP0047 detects the QNX compiler id internally,
then changes it to GNU after the language is fully enabled. This is too
late to correctly set the old IS_GNU variables, so set them as part of
the policy OLD behavior.
Reported-by: Mike Lattanzio <mlattanzio@blackberry.com>
No call sites pass NULL to the output argument, so take it by
reference to avoid the if(output) conditions. Propagate the
change through the TryCompile APIs that call it.
The cmGlobalGenerator::ResolveLanguageCompiler method, invoked only by
Makefile generators, contains code originally added by commit v2.4.0~796
(..., add new generators for msys and mingw, 2005-12-22) to compute the
full path to the compiler and save the result back into the cache value.
Since then the CMakeDetermine*Compiler modules have learned to resolve
the full path to the compiler and save it in CMake*Compiler.cmake files
configured in the build tree. The value of CMAKE_<LANG>_COMPILER in the
cache is now only for reference of what the user originally specified.
The full path is now available in a normal variable of the same name,
and this is used by project code and the generators.
When the user specifies -DCMAKE_<LANG>_COMPILER=name on the command-line
of an existing build tree that uses a Makefile generator, it is first
stored in the cache with an uninitialized type. Then later when
ResolveLanguageCompiler updates the cache entry and sets the type to
FILEPATH, cmMakefile::AddCacheDefinition does CollapseFullPath on the
"name" and ends up with something like "$PWD/name" which is unlikely to
be correct. Furthermore, cmMakefile::AddCacheDefinition proceeds to
remove the normal variable of the same name, so the value originally
saved in CMake<LANG>Compiler.cmake is ignored and the generators use the
wrong path to the compiler.
Resolve this by dropping the code from ResolveLanguageCompiler that
touches the cache value of CMAKE_<LANG>_COMPILER. As explained above it
is no longer needed anyway.
Make the virtual 'Generate' method protected. Make 'DoGenerate'
the main entry point to generation. This gives cmGlobalGenerator
a chance to do some early operations before the individual
generator-specific implementations take over.
Add a cmGlobalGenerator::SetSystemName virtual method. Call it from
cmGlobalGenerator::EnableLanguage as soon as CMAKE_SYSTEM_NAME is known.
This will give generators a chance to adapt themselves to the target
system. Pass the cmMakefile instance to the method so that the
generator can update it accordingly. Return early from EnableLanguage
if SetSystemName returns false.
Stephen Kelly
Brad King
Gregor Jasny
Sylvain Joubert
Peter Collingbourne
Nils Gladitz
Geoff Viola