Installing large directories, e.g., the output of a doxygen run, prints
one line per file resulting in too much noise in the build output. Add
an option to the install(DIRECTORY) command to not print anything upon
make install.
Extend the RunCMake.install test with cases covering MESSAGE_NEVER
behavior of the install(DIRECTORY) command.
Suggested-by: Stefan Eilemann <Stefan.Eilemann@epfl.ch>
Create a variable to allow users to control which installation
messages are printed. In particular, provide a "LAZY" setting
that prints "Installing" messages but not "Up-to-date" messages.
This is desirable for incremental re-installations.
Suggested-by: J Decker <d3ck0r@gmail.com>
Create a cmInstallGenerator::MessageLevel enumeration for future use in
specifying install message verbosity. Thread values of the type through
constructors and save the value as a member of cmInstallGenerator.
Use only a "MessageDefault" value for now.
Create options "MESSAGE_ALWAYS", "MESSAGE_LAZY", and "MESSAGE_NEVER" to
specify whether to print the "Installing" and "Up-to-date" messages.
Extend the RunCMake.file test with cases covering these options.
Teach cmFileCopier::InstallDirectory to detect whether the destination
directory exists. If so, report it as "Up-to-date" instead of
"Installing". This resolves message asymmetry with file installations.
Extend the RunCMake.file and RunCMake.install tests to check the
installation output on both the first and second run.
Suggested-by: J Decker <d3ck0r@gmail.com>
When installing a DIRECTORY, do not pre-create the DESTINATION. The
cmFileCopier::InstallDirectory method will create the directory anyway.
Give it a chance to detect whether the directory already exists or not.
Extend the cmake command-line interface to support
cmake -E env [--unset=NAME]... [NAME=VALUE]... COMMAND [ARG]...
This will be useful to run processes with modified environments
without using a shell or a full "cmake -P" script to wrap it.
Extend the RunCMake.CommandLine test to cover success and failure cases.
Inspired-by: Jonathan Bohren <jbo@jhu.edu>
From the GCC 4.9 release notes for Fortran:
https://gcc.gnu.org/gcc-4.9/changes.html
"Module files: The version of the module files (.mod) has been
incremented; additionally, module files are now compressed."
Teach cmDependsFortran::ModulesDiffer to look for the gzip magic numbers
at the beginning of the module file. If found, assume the module was
produced by gfortran >= 4.9. The modules do not appear to contain the
date as earlier versions did so we can compare the content directly
and do not actually need to decompress.
Since commit 84fdc9921 (stringapi: Pass configuration names as strings,
2014-02-09), it is not safe to use GetDefinition("CMAKE_BUILD_TYPE")
without checking the return value. Use GetSafeDefinition instead so
that a missing definition is treated as an empty string like code paths
did prior to the above commit.
Reported-by: Richard Wirth <richard@califax.de>
Use GetLinkImplementationLibraries instead of GetDirectLinkLibraries
because it tells us whether there will be any libraries to link after
evaluating generator expressions. Also GetDirectLinkLibraries will be
dropped soon.
Instead of storing just the string names in these structures, lookup any
target associated with each item and store its cmTarget pointer. Use
the cmLinkItem class to hold the name and pointer together. Update
client sites to use the pre-stored lookup result instead of looking up
the target name again.
Create a cmTarget::LookupLinkItems helper method to handle the lookup.
Since lookups are now moving from cmComputeLinkDepends::AddLinkEntries
to cmTarget::LookupLinkItems, move use of CheckCMP0004 to the latter.
This drops use of CheckCMP0004 from entries added for _LIB_DEPENDS
variables by cmComputeLinkDepends::AddVarLinkEntries, but I do not
think that use was intentional originally anyway.
Add a method like GetUtilities but that provides the target names
already looked up and resolved to cmTarget pointers internally. Update
call site in cmComputeTargetDepends::AddTargetDepend to use the
already-found target instead of looking it up again.
Many items named in target_link_libraries calls are targets, but not
all. Create a cmLinkItem type that acts like std::string so it can name
an item but also has a pointer to a cmTarget that is the result of
looking up the item name in the referencing target's scope. This will
be useful to avoid duplicate lookup operations later.
In cmTarget, cmGeneratorTarget, and cmGeneratorExpressionEvaluator, fix
target name lookups to occur in the cmMakefile context of the target
that referenced the name, not the current 'head' target. The context
matters for imported targets because they are directory-scoped instead
of globally unique. We already do this in cmComputeLinkDepends and
cmComputeTargetDepends.
Extend the InterfaceLibrary test with an example covering this behavior.
Move generator expression evaluation for imported library lists out of
GetImportInfo and into a new GetImportLinkInterface helper. This avoids
duplicating the computation and storage of all imported target info just
because some of it is parameterized on the 'head' target.
Many of the 'head' arguments added by commit v2.8.11~289^2~1 (Make
linking APIs aware of 'head' target, 2013-01-04) turned out not to be
needed. The "link implementation" of a target never needs to be
computed with anything but itself as the 'head' target (except for
CMP0022 OLD behavior because then it is the link interface).
Remove the unused 'head' target paths. Add "internal" versions of
cmTarget::GetDirectLinkLibraries and GetLinkImplementationLibraries
to support the CMP0022 OLD behavior without otherwise exposing the
'head' target option of these methods.
Create an ExpandLinkItems method to handle evaluation of generator
expressions in a library list and expansion of the ;-list into a vector.
Replace some duplicate copies of the implementation with calls to the
new helper.
f0a0f3dc WCDH: Fix compiler id test for compatibility macros.
627ad96b Project: Detect other compilers before detecting Clang.
bc950169 WCDH: Remove noise from generated defines.
eecd93fc Features: Escape the COMPILE_OPTIONS for dialects.
cb67509b VS: Remove unused parameter of WriteTargetConfigurations
790e1677 VS: Fix subproject .sln dependencies on custom targets
5fba44cf VS: Move VS-only API out of cmGlobalGenerator
It may happen that CMake include is an explicit dependency for some command,
while all CMake includes are set phony in WriteTargetRebuildManifest, this may
lead to duplicate phony generate rules which causes ninja warnings.
We need to remove implicit CMake includes in WriteUnknownExplicitDependencies.
This fixes FindCUDA ninja warnings.
For testing purposes CMake creates dummy memory checkers. The dummy checkers
are in the CMake build tree. Before this change when the path contained the
string valgrind, such as CMake-valgrind, all the checkers were thought to
be valgrind, and this caused tests to fail.
Instead printing complete help cmake/ccmake now prints only Usage section and
extra information how to get more help or start your build.
Implementation Details:
Usage help type was renamed to Help, and new Usage was introduces that prints
only command line usage information without any extra details.
Commands add some extra information when no arguments are passed.
e17a69bc cmDefinitions: Use a hashmap for faster checks
3b21705d cmDefinitions: Avoid a find-then-insert when setting variables
5abfde6c cmDefinitions: Don't store parent lookups
Since commit v2.8.12~300^2~1 (CLI: Suppress the unused warning if the
key value pair is cached, 2013-05-16), cmake::SetCacheArgs saves a
cachedValue pointer and may cause the memory to be freed (by setting the
cache entry) before reading it again. Fix this by saving the old value
in a separate string.
Each project listed in a .sln must be marked (or not) as part of the
"default build" for each configuration. For targets created by the
add_custom_target() command we add them to the default build if they
are not excluded in some way or if another target depends on them.
In the top-level .sln, a custom target is excluded if it is not
created with the ALL option to add_custom_target. In subdirectory
.sln files, a target may also be excluded if it is not within the
directory and is brought into the solution only due to a dependency
from another target in the solution.
Fix the "IsPartOfDefaultBuild" and "IsDependedOn" methods to check
every target to be included in the .sln for a dependency on the
custom target. Otherwise transitive dependencies through targets
not in the current subdirectory will not be considered.
Extend the SubProject test with a custom target to cover this case.
Reported-by: William Deurwaarder <William.Deurwaarder@tomtom.com>
Reported-by: Dirk Steenpass <dirk.steenpass@gmail.com>
Add the ability to parse the XML output of the Jacoco tool.
Jacoco (www.eclemma.org/jacoco) is a Java coverage tool.
Add and integrate a class for the parser and
include a test which utilizes the new parser.
Changing all categories with LC_ALL causes test failures in some locales.
For example, in some locales, the decimal characer could be a comma instead of period.
Factor a WriteMSToolConfigurationValues helper method out of the
cmVisualStudio10TargetGenerator::WriteProjectConfigurationValues method
to isolate the configuration settings specific to MS tools.
The cmVisualStudio10TargetGenerator::ComputeClOptions method is
only called when the target type compiles, so do not duplicate
that check in the implementation.
When a binary output file is to have no extension, the TargetExt
element in the vcxproj cannot be left empty because VS will choose
a default extension. Instead use "." because the Windows filesystem
will treat that as an empty extension.
In cmVisualStudio10TargetGenerator, convert the static functions
currently used to lookup the flag table for each tool into class
methods. This avoids passing the this->LocalGenerator member and
gives the methods access to other information that may be useful
in the future.
86be733f cmGeneratorExpression: Add workaround for Borland compiler
3495ab0a tests: update unused variable test expected output
2a1b2d84 backtrace: Convert to local paths in IssueMessage
a0829205 genex: remove the need for backtraces
efc20569 cmake: remove dummy backtraces for IssueMessage
d46c650d cmMakefile: return a backtrace
Create a Platform/Android module that includes Platform/Linux since
Android is based on Linux. Provide only the minimal settings needed to
get builds with Android NDK toolchains to work.
Disable use of RPATH since the Android loader ignores it and we cannot
predict the install destination anyway.
Android supports soname but shared library names must end in ".so" and
we cannot represent the versioned names with associated symlinks on all
host operating systems anyway. However, we do want the SONAME of
library files to be set so that linking to them by path to the library
file produces NEEDED entries with the soname and not the path. Add a
new CMAKE_PLATFORM_NO_VERSIONED_SONAME setting to tell the
cmTarget::GetLibraryNames method that not to use the VERSION or
SOVERSION target properties in the soname.
In commit 84fdc992 (stringapi: Pass configuration names as strings,
2014-02-09) a few code paths for the Xcode 1.5 single-configuration
generator were not updated to use an empty configuration name instead of
a NULL pointer when no configuration is specified in CMAKE_BUILD_TYPE.
Fix them now.
Some compilers do not offer an option to specify the path to the object
file, but rather only to the directory in which to place the object
file. See issue 14876 for some examples. Add a new OBJECT_FILE_DIR
placeholder to specify the directory containing the object file for the
current compilation. This may differ from the main target OBJECT_DIR
when the object corresponds to a source in a subdirectory.
Delay use of CMAKE_GENERATOR_TOOLSET until the CMakeSystem.cmake
file has been configured and loaded during the first project() or
enable_language() command. This gives the toolchain file named by
CMAKE_TOOLCHAIN_FILE a chance to set CMAKE_GENERATOR_TOOLSET. This
point is still early enough to set the generator toolset prior to
the initialization of any languages that might use the toolset.
The cmake::GeneratorToolset member variable remains an indication
of what was specified by the -T option or loaded from the cache.
It does not need to be updated based on the toolchain file setting.
The cmMakefile::TryCompile can still pass cmake::GeneratorToolset
into the inner instance because the try-compiled project will do
platform and language initialization using the CMakeSystem module
configured for the outer project.
Extend the RunCMake.GeneratorToolset test with cases that use a
toolchain file to set CMAKE_GENERATOR_TOOLSET.
Divide the cmGlobalVisualStudio10Generator "PlatformToolset" member into
two members representing the generator-selected default toolset and the
user-specified CMAKE_GENERATOR_TOOLSET value. Prefer the user-specified
value, if any, and then fall back to the generator-selected default.
Add support for Cobertura coverage files written by Java.
Add a test which uses the report from a Java run of Cobertura to calculate coverage.
In the documentation of CTEST_COVERAGE_COMMAND, give a sample .sh file to merge
the Cobertura .ser files and generate the XML report from the merged file.
The coverage.py tool writes out an XML that conforms to the Cobertura
Coverage tool standard. Rename the cmParsePythonCoverage files to
instead be cmParseCoberturaCoverage.
If we fail to create the generator named by CMAKE_GENERATOR, exit
with an error message instead of crashing. While at it, fix the
wording of the error message when CMAKE_GENERATOR is not set.
Extend the RunCMake.CommandLine test with cases covering the
"cmake --build" option when the named directory does not provide
a CMakeCache.txt with a valid CMAKE_GENERATOR.
The VS 7-9 IDEs parse .vcproj file boolean values in lower or upper
case. The .NET XML parsing chokes on anything but "true", "false", "0",
"1". Teach our generators to use lower-case names since they will work
for both parsers. Our VS >= 10 flag tables already use lower-case.
While tracing dependencies of a target, cmTargetTraceDependencies
follows sources by full path to determine if the source is to be
produced by a custom command. Commit 4959f341 (cmSourceFileLocation:
Collapse full path for directory comparisons., 2014-03-27) changed
the storage of target sources to be in the form of a normalized
path instead of an unnormalized path.
The path is followed by looking it up in a mapping via
cmMakefile::GetSourceFileWithOutput to acquire an appropriate
cmSourceFile. The mapping is populated with the OUTPUT components
of add_custom_command invocations, however it is populated with
unnormalized paths. This means that the tracing logic does not
find appropriate cmSourceFiles, and does not generate appropriate
build rules for the generated sources.
Normalize the paths in the OUTPUT components of add_custom_command
to resolve this.
The paths in the DEPENDS component of add_custom_command are also
not normalized, leading to the same problem again. Normalize the
depends paths after generator evaluation and expansion.
Teach set_property and get_property an "INSTALL" property type to be
associated with install-tree file paths. Make the properties available
to CPack for use during packaging. Add a "prop_inst" Sphinx domain
object type for documentation of such properties.
If the coverage.py source file is not found in the source directory, the
build directory is first searched before raising an error.
This is necessary because it is a valid workflow to build a Python
package from source, then install this package to a virtualenv that
lives in the build directory. Tests will run against this deployed
package and therefore the covered source files will be found in a
subdirectory of the build directory, and not anywhere in the source
directory.
Since commit bef93dc5 (Couple of changes: cache variables now have a map
of properties, 2002-09-11) the cmCacheManager::AddCacheDefinition method
accesses its map entry by reference. However, the commit left the
original entry assignment at the end of the method. With Apple Clang
5.1 and libc++ this self-assignment destroys the cache entry property
map.
Drop the self assignment. Also drop the condition around the call to
UnwatchUnusedCli since it was a self-comparison that must always have
been true.
Teach cmake::HandleDeleteCacheVariables to tolerate a missing HELPSTRING
(NULL pointer) when saving cache entries. In the absence of other bugs
this should not be possible, but avoid the crash just in case.
When CMP0053 is in WARN mode, variables get expanded twice, leaking the
fact that the string was expanded twice and changing behavior. Instead,
suppress variable watches when running the expansion to trigger the
CMP0053 warning.
The ALLOWED_UNKNOWN_VARIABLE_READ_ACCESS access type was switched on an
undocumented variable and its lookup caused an unnecessary performance
impact. Remove it.
Allow setting build properties based on the features available
for a target. The availability of features is determined at
generate-time by evaluating the link implementation.
Ensure that the <LANG>_STANDARD determined while evaluating
COMPILE_FEATURES in the link implementation is not lower than that
provided by the INTERFACE of the link implementation. This is
similar to handling of transitive properties such as
POSITION_INDEPENDENT_CODE.
d1035bd5 cmTarget: Avoid copying container we don't need to copy.
96eb97f8 Help: Fix whitespace in doc link.
0dffbb93 Features: Ensure that list exists to remove from.
When we kill a child we send SIGSTOP first so that we can traverse its
child processes recursively. On unwinding the recursion we then send
SIGKILL. Current Cygwin has trouble when both signals are sent in quick
succession by the parent process. Add a usleep(1) after sending the
first signal to give up our time slice and give Cygwin a chance to
process the first signal before sending the second.
31b3bbd7 Merge branch 'backport-fix-CMP0022-language-propagation' into fix-CMP0022-language-propagation
40b9cd0f CMP0022: Fix link language propagation in NEW behavior
42bbf130 CMP0022: Fix link language propagation in NEW behavior
The languages used in compiling STATIC libraries need to be propagated
to dependents regardless of the settings of INTERFACE_LINK_LIBRARIES or
CMP0022. They are independent of the libraries in the link interface.
Prior to commit v2.8.12~192^2~2 (Introduce the INTERFACE_LINK_LIBRARIES
property, 2013-06-04) the cmTarget::ComputeLinkInterface code path for
"explicitLibraries" could never be taken for STATIC libraries, so the
logic to propagate languages existed only in the non-explicitLibraries
code path. After that commit, INTERFACE_LINK_LIBRARIES could be set for
STATIC libraries to cause the "explicitLibraries" code path to be taken.
The commit also left the old non-explicitLibraries code path conditional
on CMP0022 not being set to NEW. Thus link language propagation was
left missing from two cases by that commit.
The explicitLibraries code path was fixed to propagate languages by
commit v2.8.12~149^2~1 (cmTarget: Fix iface libraries and languages for
static libraries, 2013-07-26). However, the non-explicitLibraries case
was never taught to propagate languages when CMP0022 is set to NEW. Fix
that now. Factor the logic to propagate link languages out of the link
interface libraries conditions so that it always occurs. Update
Tests/Fortran to set CMP0022 to NEW to test this case (because the test
passes only if link language propagation works).
The languages used in compiling STATIC libraries need to be propagated
to dependents regardless of the settings of INTERFACE_LINK_LIBRARIES or
CMP0022. They are independent of the libraries in the link interface.
Prior to commit v2.8.12~192^2~2 (Introduce the INTERFACE_LINK_LIBRARIES
property, 2013-06-04) the cmTarget::ComputeLinkInterface code path for
"explicitLibraries" could never be taken for STATIC libraries, so the
logic to propagate languages existed only in the non-explicitLibraries
code path. After that commit, INTERFACE_LINK_LIBRARIES could be set for
STATIC libraries to cause the "explicitLibraries" code path to be taken.
The commit also left the old non-explicitLibraries code path conditional
on CMP0022 not being set to NEW. Thus link language propagation was
left missing from two cases by that commit.
The explicitLibraries code path was fixed to propagate languages by
commit v2.8.12~149^2~1 (cmTarget: Fix iface libraries and languages for
static libraries, 2013-07-26). However, the non-explicitLibraries case
was never taught to propagate languages when CMP0022 is set to NEW. Fix
that now. Factor the logic to propagate link languages out of the link
interface libraries conditions so that it always occurs. Update
Tests/Fortran to set CMP0022 to NEW to test this case (because the test
passes only if link language propagation works).
Fix the MUMPS coverage parser:
* Account for tabs after entry points
* Stop double incrementing lines that have explicit calls to the 0 line
* If a line has been previously marked as non executable, but then
contains a count, increment it an extra one to push it back into
the executable code set.
Add a custom routine and corresponding coverage files in the test case.
This file is smaller and has cmcov/mcov files that have data for only
that routine.
Add source file properties to control Xcode file type attributes:
XCODE_EXPLICIT_FILE_TYPE => explicitFileType
XCODE_LAST_KNOWN_FILE_TYPE => lastKnownFileType
Add a RunCMake.XcodeProject test to verify generated project content.
Choose the attribute name and file type and send them through a single
attribute generation code path. Compute the file extension only when
needed. Leave the file type selection logic indented in a block so it
can be made conditional later.
Output sent through these APIs is logically part of the CMake process
output. Capture it with callbacks and display it in the cmake-gui
output window along with other messages.
Factor a common callback type out of StdoutCallback. Add an equivalent
StderrCallback. While at it, use "size_t" for the data length instead
of "int".
Teach "ctest --build-and-test" to capture the Stderr callback because
output sent through it is part of the logical CMake process output.
Add properties and variables corresponding to CXX equivalents.
Add features for c_function_prototypes (C90), c_restrict (C99),
c_variadic_macros (C99) and c_static_assert (C11). This feature
set can be extended later.
Add a <PREFIX>_RESTRICT symbol define to WriteCompilerDetectionHeader
to conditionally represent the c_restrict feature.
Add ERROR_SHARING_VIOLATION to the set of errors (previously including
only ERROR_ACCESS_DENIED) that cause a rename (MoveFile) on Windows to
retry. The condition was observed when two renames to the same target
file name were happening simultaneously.
ba387cb8 Help: Add notes for topic 'package-disable-registry'
be8ae960 Allow the Package Registry to be disabled (#14849)
d09fda5d Tests: Improve FindPackageTest for in-source builds
ac24a1c0 Tests: Improve FindPackageTest exported package version
When a project is packaged for redistribution the local package
registries should not be updated or consulted. They are for developers.
Add variables to disable use of package registries globally:
* CMAKE_EXPORT_NO_PACKAGE_REGISTRY that disables the export(PACKAGE)
command
* CMAKE_FIND_PACKAGE_NO_PACKAGE_REGISTRY that disables the User Package
Registry in all the find_package calls.
* CMAKE_FIND_PACKAGE_NO_SYSTEM_PACKAGE_REGISTRY that disables the
System Package Registry in all the find_package calls.
Update documentation and unit tests.
bc9a8bba Makefile: Undef FEATURE_STRING iteration define after use.
eb638c75 Tests: Make CompileFeatures feature list lang-specific.
e2f09aff CMakeConfigurableFile: Remove excess newline.
5109b042 Features: Fix GNU 4.8.1 version test.
6a9fdbeb Test: Parameterize the language in the CompileFeature test.
f5bf9d43 Tests: Make CompileFeature tests use highest standard known.
Since commit v3.0.0-rc1~305^2 (Ninja: deptype msvc for Intel's compiler
on Windows, 2013-11-25) we used "deps = msvc" for the Intel compiler.
This is correct only on Windows. On Linux we still want "deps = gcc".
Fix the logic to use "deps = msvc" when the compiler id or the "simulate
id" is "MSVC". This will preserve the behavior on Intel for Windows and
fix the behavior on Intel for Linux. In the future this should be
converted to a platform information module variable.
These policies should be checked at the call site that tries to access
the LOCATION or SOURCES property, not the directory scope containing the
target. Thread the caller context through cmTarget::GetProperty to use
for checking the policy setting and emitting a diagnostic with proper
backtrace.
Extend the RunCMake.CMP0026 and RunCMake.CMP0051 tests with
cross-directory cases.
This policy should be checked at the call site that tries to access the
LOCATION property, not the directory scope containing the target.
Thread the caller context through cmTarget::GetProperty to use for
checking the policy setting and emitting a diagnostic with proper
backtrace.
Extend the RunCMake.CMP0026 test with a cross-directory case.
Use the CPack DragNDrop generator instead of the deprecated PackageMaker
tool to package CMake itself. This provides an installation experience
that is more consistent with other products on OS X and allows users to
select the destination directory easily. It also avoids installing
"/private/var/db/receipts/com.Kitware.CMake.*" receipts that must be
removed by "pkgutil --forget com.Kitware.CMake" before another version
of CMake can be installed.
The DragNDrop installer does not support a post-flight script, so drop
our configuration of it. The cmake-gui has an option for installing
symbolic links to enable command-line use. In practice users may simply
add "/Applications/CMake.app/Contents/bin" to their PATH instead.
Introduce a new implementation of ExpandVariablesInString and select
between the old and new implementations based on policy CMP0053.
Instead of cmCommandArgumentParserHelper, use a custom parser with our
own stack. This is much faster and works well for our simple grammar.
The new behavior of CMP0053 should expand @VAR@ syntax only in certain
contexts. All existing EVIS callers use "replaceAt == true" so
hard-code our call to the old implementation. Update the signature to
default to "replaceAt == false" and pass "replaceAt == true" explicitly
in the call sites for configure_file and string(CONFIGURE).
Testing the configure (no generate) step with ParaView shows ~20%
performance improvement.
In terms of complete configure/generate steps, further testing with
ParaView shows a 20% performance improvement over 2.8.12.2 with Unix
Makefiles and minimal with Ninja. Ninja is less because it generate step
is the expensive part (future work will address this) by a long shot and
these changes help the configure step for the most part.
205215fb cmTarget: Add CXX_STANDARD_REQUIRED to control decay.
1df2116b Features: Decay language flag if requested is not available.
c4f4dac2 Project: Fix exit-on-error with compile feature tests.
5bb7ce72 Project: Use nullary form of main for compile feature tests.
64254e7a Project: Remove extern from static string in feature tests.
0d9c99bf Help: Fix order of help entries.
dc7639bd Tests: Fix name of cache variable.
77b37965 cmSourceFile: Take a string
7b8a9904 perf: Cache the language property string
10baf00f cmSourceFile: Cache the isUiFile check
14e7a8ae cmSourceFileLocation: Return a string reference
b4cb543e cmSourceFileLocation: Save some string copies
e8e1f3a1 cmSourceFileLocation: Simplify logic in Matches
5554910e cmSourceFileLocation: Avoid string allocation in extension checking
Brad King
Kitware Robot
Clinton Stimpson
Adam Strzelecki
Bill Hoffman
Stephen Kelly
Joseph Snyder
Ben Boeckel
Ben Boeckel
Nils Gladitz
Mark Salisbury
Zach Mullen
Roni Choudhury
Eric Berge
Daniele E. Domenichelli