This commit re-words the warning message produced for CMP0012 to avoid
the word 'you' since often the person reading the message is not the
author of the code. We also add an example of the bad OLD behavior to
the policy documentation.
These policies were originally developed during the 2.7.x series and
intended for 2.6.5. There was never a 2.6.5 release, so we should refer
to 2.8.0 instead.
This commit creates target and directory properties to enable the Intel
interprocedural optimization support on Linux. Enabling it adds the
compiler option '-ipo' and uses 'xiar' to create archives.
See issue #9615.
This creates cmTarget::GetFeature and cmMakefile::GetFeature methods to
query "build feature" properties. These methods handle local-to-global
scope and per-configuration property lookup. Specific build features
will be defined later.
We create cmMakefileTargetGenerator::AddFeatureFlags to consolidate
addition of language flags. Currently it just adds the flags from
generic per-language flag variables (AddLanguageFlags).
There is confusion whether the file "currently being processed" inside a
function or macro is the file containing the definition or not. This
commit explicitly describes the behavior. See issue #9646.
In VS 6, 7, and 7.1 solutions we implement
add_dependencies(myexe mylib) # depend without linking
by creating an intermediate mylib_UTILITY target with dependencies
myexe -> mylib_UTILITY -> mylib
to avoid linking myexe to mylib. Previously these extra targets were
only added to the solution files in an ancestor directory of that
defining mylib. For example, in the project:
# CMakeLists.txt
project(TOP)
add_subdirectory(A)
add_subdirectory(b)
# A/CMakeLists.txt
add_library(mylib ...)
# B/CMakeLists.txt
project(B)
add_executable(myexe ...)
add_dependencies(myexe mylib)
the solution for TOP would have mylib_UTILITY but the solution for B
would not even though it pulls in mylib through the dependency. This
commit fixes solutions generated in other directories so that any
solution that has mylib will get mylib_UTILITY also.
See issue #9568.
This commit cleans up the declaration, definition, and invocations of
the GetTargetSets method and related code. There is no change in
function except to make the method virtual.
This teaches the VS 6 IDE generator to use the transitive closure of
target dependencies. This re-uses much of the implementation already
done for the other VS>6 generators. See issue #8223 and issue #9568.
We move cmGlobalVisualStudio7Generator::OrderedTargetDependSet up to
cmGlobalVisualStudioGenerator so it can be re-used for other VS
versions. See issue #9568.
Some find-modules use get_filename_component() to expand registry
values. We need to look in both the 32-bit and 64-bit registry views
when expanding values. We prefer the one that the target application
would see. See issue #8792.
When building through NMake with VS 6, the module definition file must
be passed without spaces in the path. This is because 'cl -link' does
not escape the spaces when passing the value on to the linker.
Since Haiku does not have /usr (and therefore /usr/local), this commit
changes the default install prefix to the equivalent directory of
/boot/common.
See issue #9607.
We recognize .def source files and map them to the /DEF:<file> option in
the MSVC tools. Previously this worked only for shared libraries. This
commit cleans up the implementation and makes it work for executables
too. See issue #9613.
When constructing cmVisualStudioGeneratorOptions to parse options for
tools 'link' and 'lib' the tool type is now Linker, not Compiler. This
tells it not to recognize flags starting in '/D' as preprocessor macros,
such as the '/DEF:<file>' linker option. See issue #9613.
The commit "cmparseMSBuildXML should output StringProperty values too"
fixed the script that generated
Source/cmVS10CLFlagTable.h
Source/cmVS10LibFlagTable.h
Source/cmVS10LinkFlagTable.h
This commit updates the files with the new output.
Some older STL implementations invoke the comparison functor as a const
object, so the function call operator must be 'const' qualified. This
fixes the commit "Fix support for OLD behavior of policy CMP0002" to
compile on older STLs.
The commit "Cleanup make progress rule generation code" introduced a map
from target name to the progress.make file location. Policy CMP0002's
OLD behavior allows duplicate target names in different directories, so
only one ends up with a progress.make file. This commit fixes the map
to order by target name first and build directory second, restoring
support for duplicate target names.
This converts the CMake license to a pure 3-clause OSI-approved BSD
License. We drop the previous license clause requiring modified
versions to be plainly marked. We also update the CMake copyright to
cover the full development time range.
This converts the KWSys license to a pure 3-clause OSI-approved BSD
License. We drop the previous license clause requiring modified
versions to be plainly marked. We also update the KWSys copyright to
cover the full development time range.
This commit adds KWSys configuration option KWSYS_INSTALL_DOC_DIR to
specify the directory for installation of documentation. We use it to
put the KWSys Copyright.txt file at the location
${KWSYS_INSTALL_DOC_DIR}/${KWSYS_NAMESPACE}/Copyright.txt
in the project installation tree. This helps containing projects meet
the license requirement to distribute the copyright and license with
binary forms.
The commit "Generate proper Intel Fortran project version" replaced the
hard-coded 9.10 value with a runtime registry lookup of the real
version. Version 10.1 actually uses project file format 9.10, so this
commit switches it back for that version. See issue #9169.
Applications on Haiku are discouraged from storing their data in $HOME.
This teaches export(PACKAGE) and find_package() to use the BeAPI on
Haiku to store the package registry instead of using ~/.cmake/packages.
See issue #9603.
Set the working_dir entry in the codeblocks project file of executable
targets to the directory where the executable is created. Then when running
CB, executing the target (not building), will run it from that directory.
Alex
CMake policies CMP0014 and CMP0015 were implemented in the development
series version 2.7.x but will be first released in 2.8.0. Now that the
development version number is higher than that (2.9.x) we can update
their version of introduction to the actual release number.
In CMake Policy documentation we specify the default behavior for the
current version of CMake. This commit fixes that version by reporting
the full version number instead of just major and minor.
The commit "Fix KWSys SystemTools build on cygwin with -mwin32" tried to
restore the state of the _WIN32 definition that was broken by the commit
"Optimize KWSys SystemTools::FileExists on Windows". It did so for the
case of building with -mwin32 on cygwin, but since including <windows.h>
defines _WIN32, it failed for the case of not using -mwin32.
This commit restores the state of _WIN32 in all cases by undefining it
after including <windows.h> if it was not defined beforehand.
Xcode 1.5 writes helper scripts at the projectDirPath location for
targets that do not set SYMROOT. We now add SYMROOT to custom targets
so that all targets set it. This prevents Xcode 1.5 from touching the
source directory now that we always set projectDirPath.
See issue #8481.
Now only the dependencies for the file where the dependencies actually may
have changed are rescanned, before that this was done for all source files
even if only one source file had changed.
This reduces e.g. on my machine the time for scanning the dependencies
of kdelibs/khtml/ when only one file (khtml_global.cpp) has changed from
around 7.5 seconds to 1.2 seconds.
The tests succeed, it does what I expected it to do on kdelibs, and Brad
also reviewed the patch, so I think it should be ok.
Alex
Commit "Optimize KWSys SystemTools::FileExists on Windows" accidentally
added "#undef _WIN32" when including <windows.h> on cygwin, which breaks
builds using the -mwin32 flag. This commit removes that line and fixes
the real error it was intended to avoid.
Xcode project source file references need to always be relative to the
top of the source tree in order for SCM and debug symbols to work right.
We must even allow the relative paths to cross outside of the top source
or build directories.
For subdirectory project() command Xcode projects we use the source
directory containing the project() command as the top. Relative paths
are generated accordingly for each subproject.
See issue #8481.
In cmLocalGenerator::ConvertToRelativePath we normally convert to
relative path only if the local and remote paths both lie inside the
source tree or both lie inside the build tree. This commit adds an
optional 'force' argument to allow conversion even when this rule is
violated.
If CMakeDirectoryInformation.cmake is newer than depend.internal the include
directories may have changed, so dependencies need to be scanned again.
Ok by Brad.
Alex
We optimize this method by using the GetFileAttributesExA native Windows
API to check for file existence when possible. For real Windows builds
we always use it. For Cygwin we use cygwin_conv_to_win32_path to get a
native Windows path if possible and otherwise fall back to 'access'.
Cygwin-to-Windows path conversion and cache by Wojciech Migda.
See issue #8826.
When reading the depend.internal file, check only once for every depender
whether it exists, instead of repeatedly in a loop for each dependee. Within
that function it can only change of the depender is removed. This is taken
care of.
This reduces the number of access() calls in kdelibs/khtml from 180000 to
90000 (i.e. 50%), and reduces the time for that (without the actual
scanning) from 0.3 s to 0.21 s on my system.
Alex
This subclass of cmGlobalXCodeGenerator only provided two virtual method
overrides, and it made construction of the Xcode generator instance
complicated. This commit removes it and replaces the virtual methods
with tests of the Xcode version. The change removes duplicate code.
Previously we checked for this flag by parsing the version number of GCC
out of 'gcc --version', but this is not reliable because the format can
vary greatly. Now we run 'gcc -v --help' and look for '-isysroot' in
the list of options.
We also now store the result on a per-language basis in the per-compiler
info file "CMake<LANG>Compiler.cmake". This is necessary to make it
accessible from try-compile projects so that they generate correctly.
Some vendor tools convert PDB file names given on the command line to
lower-case before creating the file. When CMake places a mixed-case PDB
file name into the build system, the file does not exist the first time
and it is written with mixed case. After the first build though the
native tool has created a lower-case version of the file. If CMake does
CollapseFullPath again, the file exists so the actual-case lookup gets
the lower-case name. This causes the build files to change so the
project rebuilds.
The solution is to avoid calling CollapseFullPath for files generated by
the build. In the case of PDB files we already construct them from
paths that have been collapsed, so we can just skip the call altogether.
See issue #9350.
In cmMakefile::AddSubDirectory we were checking for addition of the same
source directory multiple times. However, the check code was incorrect
because it compared pointers instetad of pointed-to strings. Since the
check was written, a better check was added right after it to enforce
unique binary directories (in which case duplicate sources are fine).
This commit simply removes the old-style check code.
KWSys Robot
Alexander Neundorf
Bill Hoffman
David Cole
Brad King
Zack Galbreath
Zach Mullen
Clinton Stimpson