Commit Graph

200 Commits

Author SHA1 Message Date
Stephen Kelly b5f5de70c0 cmGeneratorTarget: Copy IsFrameworkOnApple from cmTarget.
Leave the cmTarget method behind for now to implement cmInstallCommand.
2015-10-19 20:27:41 +02:00
Brad King f13521317a Merge topic 'clean-up-cmTarget'
55474e61 cmState: Move GetTargetTypeName from cmTarget.
38df5c36 Remove now-obsolete casts.
4ee2b267 cmGeneratorTarget: Use enum for GetType.
eac15298 cmState: Move TargetType enum from cmTarget.
482b3811 cmTarget: Move link type enum out.
2ee1cb85 cmTarget: Move ImportInfoMap out of internal class.
a48bcabd cmTarget: Move backtrace member out of internal class.
6694d993 cmTarget: Remove unneeded constructors.
983c00f8 Generators: Use GetType from the cmGeneratorTarget.
2015-10-16 09:35:34 -04:00
Stephen Kelly eac15298a8 cmState: Move TargetType enum from cmTarget.
Mostly automated:

 values=( "EXECUTABLE" "STATIC_LIBRARY" "SHARED_LIBRARY" "MODULE_LIBRARY" "OBJECT_LIBRARY" "UTILITY" "GLOBAL_TARGET" "INTERFACE_LIBRARY" "UNKNOWN_LIBRARY" "TargetType")
 for i in "${values[@]}"; do     git grep -l cmTarget::$i | xargs sed -i "s|cmTarget::$i|cmState::$i|g"; done
2015-10-15 00:41:39 +02:00
Stephen Kelly 7f5ec9f109 cmLocalGenerator: Port GetTargetDirectory to cmGeneratorTarget. 2015-10-15 00:33:12 +02:00
Stephen Kelly 12cb3bdce4 cmLocalGenerator: Add Home directory accessors.
Reduce reasons for cmLocalGenerator to have a cmMakefile.
2015-10-09 00:00:19 +02:00
Brad King 6e2a4087f2 Ninja: Centralize path conversion in global generator (#15757)
In the Ninja generator we run all build rules from the top of the build
tree rather than changing into each subdirectory.  Therefore we convert
all paths relative to the HOME_OUTPUT directory.  However, the Convert
method on cmLocalGenerator restricts relative path conversions to avoid
leaving the build tree with a "../" sequence.  Therefore conversions
performed for "subdirectories" that are outside the top of the build
tree always use full paths while conversions performed for
subdirectories that are inside the top of the build tree may use
relative paths to refer to the same files.

Since Ninja always runs rules from the top of the build tree we should
convert them using only the top-level cmLocalGenerator in order to
remain consistent.  Also extend the test suite with a case that fails
without this fix.
2015-09-25 14:36:30 -04:00
Stephen Kelly ff8ac8ee6a cmLocalGenerator: Create from already-constructed cmMakefile.
Don't manage the lifetime of the cmMakefile with cmLocalGenerator.
2015-08-28 18:44:39 +02:00
Stephen Kelly 9b6a743b80 cmLocalGenerator: Remove Parent pointer. 2015-08-28 18:44:38 +02:00
James Johnston 874e70bc57 Ninja: Prevent generating if installed Ninja version is too old. 2015-08-09 13:51:35 -04:00
James Johnston c5ac2b9df3 Ninja: Centralized required Ninja version numbers and comparisons. 2015-08-09 13:31:24 -04:00
Brad King 55706506c7 Merge topic 'use-generator-target'
a309409e cmOrderDirectories: Port to cmGeneratorTarget.
f83e8402 cmGeneratorTarget: Move CompileInfoMap from cmTarget.
b3f0e353 cmGeneratorTarget: Move GetCompilePDBDirectory from cmTarget.
34c43741 cmGeneratorTarget: Move GetOutputName from cmTarget.
4329a71c cmComputeLinkDepends: Port to cmGeneratorTarget.
c93230ac cmComputeLinkInformation: Port to cmGeneratorTarget.
ee26add4 cmGeneratorTarget: Move IsBundleOnApple from cmTarget.
c8a5f5ae cmMakefileTargetGenerator: Add accessor for GeneratorTarget.
f8076644 cmGeneratorTarget: Move GetLinkClosure from cmTarget.
7c809fa2 cmGeneratorTarget: Move GetLinkerLanguage from cmTarget.
6da99de3 cmGeneratorTarget: Move GetFrameworkDirectory from cmTarget.
d6bb319b cmGeneratorTarget: Move GetFullName from cmTarget.
7a460852 cmGeneratorTarget: Move GetAppBundleDirectory from cmTarget.
d560bfd2 cmGeneratorTarget: Move GetInstallNameDir* from cmTarget.
89e2a080 cmGeneratorTarget: Move GetMacContentDirectory from cmTarget.
62720e44 cmGeneratorTarget: Move GetFullNameComponents from cmTarget.
...
2015-08-06 09:38:27 -04:00
Stephen Kelly 1ab59f688f cmGlobalNinjaGenerator: Simplify usage of API. 2015-08-04 19:19:40 +02:00
Stephen Kelly 6c0e9ee276 cmMakefile: Store EvaluationFiles.
Relieve the cmGlobalGenerator of this responsibility.  Evaluate
the generator expressions in the context of the cmLocalGenerator.
2015-08-01 13:07:11 +02:00
Stephen Kelly ec38e4c84f Move GetFullPath to cmGeneratorTarget 2015-07-27 21:59:02 +02:00
Brad King 001f9b3617 Add common base classes to Makefile and Ninja generators
Provide a place to move functionality common to both.
2015-07-09 09:50:05 -04:00
Stephen Kelly faec4e611d cmComputeTargetDepends: Change API to use cmGeneratorTarget. 2015-07-01 19:46:19 +02:00
Brad King c12fc3573b Merge topic 'inject-state-snapshot'
3b880a07 cmLocalGenerator: Require a valid cmState::Snapshot in the ctor.
e12afe76 cmState: Host some state from the cmGlobalGenerator.
c7b79aa1 cmGlobalGenerator: Require a cmake instance in ctor.
01e1cd5c cmState: Move snapshot creation to the cmake instance.
2015-05-27 09:23:01 -04:00
Brad King af570e13fd Merge topic 'ninja-per-target-rules'
9da84ab6 Ninja: Fix regression in .rsp file support
2015-05-27 09:22:55 -04:00
Stephen Kelly 3b880a0741 cmLocalGenerator: Require a valid cmState::Snapshot in the ctor.
Refactor the local generator creation API to accept a
cmState::Snapshot.  Adjust MakeLocalGenerator to use the 'current'
snapshot in cases where there is no parent.  Create the snapshot
for subdirectories in cmMakefile::AddSubdirectory.

This means that snapshots are now created at the point of extending the tree,
as appropriate, and independently of the cmLocalGenerator and cmMakefile they
represent the state for.
2015-05-27 09:18:32 -04:00
Stephen Kelly e12afe766e cmState: Host some state from the cmGlobalGenerator. 2015-05-27 09:18:31 -04:00
Stephen Kelly c7b79aa16a cmGlobalGenerator: Require a cmake instance in ctor.
It is required anyway, so this makes it explicit.
2015-05-27 09:18:31 -04:00
Brad King 9da84ab64a Ninja: Fix regression in .rsp file support
In commit a390de65 (Ninja: Generate separate compile and link rules for
each target, 2015-05-18) we removed the _RSP_FILE suffix from rule names
meant for targets that need to build with a .rsp file because we now use
per-target rules anyway.  Remove this suffix from references to the rule
too.

Reported-by: Herz Thomas <Thomas.Herz@kuka.com>
2015-05-26 09:15:10 -04:00
Brad King 6fbd4cae0d Use cmSystemTools::GetCMakeCommand() to get path to cmake internally
This is much simpler than finding a way to lookup "CMAKE_COMMAND"
everywhere.
2015-05-20 11:20:42 -04:00
Brad King a390de65e0 Ninja: Generate separate compile and link rules for each target
Our <LANG>_COMPILER and <LANG>_<TARGET_TYPE>_LINKER rule generation has
access to a specific cmTarget so the results may depend on it.  Instead
generate separate rules for each target using an encoded target name.
In particular, this makes CTEST_USE_LAUNCHERS report proper target
information.
2015-05-18 15:01:06 -04:00
Stephen Kelly b17686d2bb cmGlobalGenerator: Move some flags from cmLocalGenerator.
These flags are global, and so they belong here instead of being
set on each local generator.
2015-05-14 20:36:28 +02:00
Stephen Kelly 34c9ee2ed7 cmLocalGenerator: Require a global generator in the constructor.
Port generator factory methods to pass it.
2015-05-14 20:36:27 +02:00
Thomas Herz b3de0dfe93 Ninja: Use forward slashes for any GCC on Windows (#15439)
Any GCC compiler on a Windows host needs forward slashes, not just
those built for MinGW.
2015-05-07 14:07:20 -04:00
Brad King 378c2a0e86 Ninja: Refactor detection of MinGW tools on Windows
Check for CMAKE_COMPILER_IS_MINGW only after enabling a language when it
might actually be set.  Previously this worked by accident because the
check for working compiler or a second language enabled would cause the
code path to be taken.

Store UsingMinGW as an instance member of cmGlobalNinjaGenerator so that
it is reset on each reconfigure.  Otherwise cmake-gui cannot switch
between build trees for MinGW or non-MinGW tools.
2015-05-07 14:02:44 -04:00
Brad King 957c2aac7f RC: Simplify selection of resource compiler based on C/C++ toolchain
Revert the refactoring by commit v2.8.11~105^2~1 (Ninja: use MinGW
generator code in EnableLanguage, 2013-03-09) and move the MinGW-
specific logic back to the "MinGW Makefiles" generator.  Instead teach
the platform information modules for GNU and MSVC on Windows to set the
preferred RC compiler just before enabling the RC language.  This way
we choose the RC compiler based on the C/C++ toolchain that is actually
enabled.
2015-05-07 11:43:02 -04:00
Stephen Kelly de21168612 Port to static cmPolicies API. 2015-05-04 22:32:20 +02:00
Stephen Kelly a48aebcb67 cmLocalGenerator: Require a parent in the constructor.
Pass the parent though cmGlobalGenerator::CreateLocalGenerator.

This will make it easy to initialize state scopes independent of
cmMakefile.
2015-04-28 07:50:52 +02:00
Brad King 5a5ef00106 Merge topic 'clean-up-cmMakefile'
8dc3a67c cmMakefile: Out-of-line the directory methods.
0f3c8cfa cmMakefile: Use method abstraction to access directories.
b288a997 cmMakefile: Rename SetStart* directory API to SetCurrent*.
932d53bc cmMakefile: Remove redundant method duplication.
32b8f03a cmMakefile: Port users of GetStart* methods to new names.
54d6a918 cmMakefile: Rename GetCurrent{Output,Binary}Directory.
55d80d0a cmMakefile: Rename GetCurrent{,Source}Directory.
b23cf06f cmake: Remove redundant start directories.
fcf246ac cmMakefile: Populate Home directories on initialize.
8878bea7 cmake: Initialize Home directories on cmake for find-package mode.
044dc815 Use the Home directories from the cmake class where intended.
d67e8f24 cmake: Fix directory used to find the cache
1ea085d1 cmMakefile: Initialize dir definitions early.
f034bb2f Remove redundant calls to MakeStartDirectoriesCurrent.
3a68c323 cmMakefile: Fix wrong parameter names.
2015-04-21 09:42:07 -04:00
Stephen Kelly 32b8f03acc cmMakefile: Port users of GetStart* methods to new names. 2015-04-21 00:15:20 +02:00
Stephen Kelly 54d6a9187f cmMakefile: Rename GetCurrent{Output,Binary}Directory.
Match names used in CMake code.
2015-04-21 00:12:52 +02:00
Brad King 356c26ebdf cmSystemTools: Teach RunSingleCommand to separate stdout and stderr
Extend the RunSingleCommand signature to capture stdout and stderr
separately.  Allow both to be captured to the same std::string
to preserve existing behavior.  Update all call sites to do this
so that this refactoring does not introduce functional changes.
2015-04-20 15:47:50 -04:00
Brad King 5e0e65c189 Merge topic 'add-GreenHills-MULTI-generator'
66b641f4 Help: Add notes for topic 'add-GreenHills-MULTI-generator'
48004d9d Add a 'Green Hills MULTI' generator on Windows
051d8be1 cmLocalGenerator: Constify some cmTarget and cmGeneratorTarget arguments
2015-04-20 14:02:52 -04:00
Geoff Viola 48004d9dbe Add a 'Green Hills MULTI' generator on Windows
Green Hills MULTI is an IDE for embedded real-time systems.  The IDE's
product page can be found here:

 http://www.ghs.com/products/MULTI_IDE.html

It supports cross compiling on ARM, Intel x86, and other architectures
with various operating systems.  The IDE exists on Linux and Windows
host systems, but CMake will currently only generate the project files
on Windows host systems.
2015-04-20 13:55:40 -04:00
Brad King 9ac0568390 Ninja: Drop 'experimental' label in documentation
This generator is no longer experimental and has been fairly
mature for several releases already.
2015-04-14 13:14:50 -04:00
Brad King bd9c7f9b2c Ninja: Add policy to require explicit custom command byproducts
Add policy CMP0058 to avoid generating 'phony' ninja rules for unknown
custom command dependencies.  This requires projects to specify their
custom command byproducts explicitly.  With this requirement we no
longer have to assume that unknown custom command dependencies are
generated and can instead simply assume they are source files expected
to exist when the build starts.  This is particularly important in
in-source builds.  It is also helpful for out-of-source builds to allow
Ninja to diagnose missing files before running custom command rules that
depend on them.
2015-03-20 17:40:12 -04:00
Brad King ed8e30b00d cmGlobalNinjaGenerator: Optimize handling of known build outputs
Teach WriteUnknownExplicitDependencies to take ownership of the set of
WriteBuild outputs immediately since no other methods need the data.
This avoids re-inserting the whole set into another already populated
set.
2015-03-20 13:33:13 -04:00
Brad King ad094f435e cmGlobalNinjaGenerator: Fix spelling of "unknown" 2015-03-20 13:32:55 -04:00
Brad King 80afe28a10 Ninja: Do not generate circular phony rules (#15454)
The phony rules added by commit v2.8.12~248^2 (Ninja: Custom Command
file depends don't need to exist before building, 2013-06-07) are
circular, e.g.

  build side-effect: phony side-effect

This is not diagnosed by Ninja as of version 1.5, but the dependency
does not make sense.  Simply drop it and use phony rules of the form

  build side-effect: phony

instead.

Reported-by: Daniel Dunbar
2015-03-18 12:55:27 -04:00
Gregor Jasny ce935ebe50 cmake: Teach --build to honor CMAKE_VERBOSE_MAKEFILE for Ninja
The Ninja build system does not support a in-file verbositiy switch.
Instead teach 'cmake --build' to extract the CMAKE_VERBOSE_MAKEFILE
setting and pass it as an optional '-v' argument to Ninja.  This can
serve as a reasonable fallback.

Signed-off-by: Gregor Jasny <gjasny@googlemail.com>
2015-02-26 09:51:11 -05:00
Brad King b5a467262b Merge topic 'drop-ancient-workarounds'
0f7bdd61 Remove VS 6 special case.
5e92c826 Remove some obsolete stuff.
15e42bb2 cmStandardIncludes: Remove obsolete cmOStringStream.
931e055d Port all cmOStringStream to std::ostringstream.
f194a009 Remove unused cmIStringStream class.
3ec1bb15 cmStandardIncludes: Remove std namespace hack.
bb3bce70 cmStandardIncludes: Remove ANSI_FOR_SCOPE hack.
28fa4923 cmStandardIncludes: Remove iostreams workaround for obsolete Compaq compiler.
837a8a63 cmStandardIncludes: Drop Comeau-related workaround.
4030ddfd Remove Borland-related undef.
17d6a6fd cmStandardIncludes: Remove comment about Borland.
26fb5011 Drop SGI as a CMake host compiler.
2015-01-12 08:57:39 -05:00
Stephen Kelly 931e055d8c Port all cmOStringStream to std::ostringstream.
All compilers hosting CMake support the std class.
2015-01-11 17:06:03 +01:00
Stephen Kelly 6162c9194b Use two-iterator std::set::insert where appropriate. 2015-01-11 17:00:55 +01:00
Brad King 67bd514adc Ninja: Refactor restat to be a string internally
This will allow values other than "" and "1" to be generated in
the rules.ninja file.
2014-11-14 16:16:00 -05:00
Peter Collingbourne f42d86f0b8 Ninja: Implement USES_TERMINAL using the console pool if available 2014-11-14 11:56:33 -05:00
Peter Collingbourne d5eae5563f Ninja: factor out the test for console pool support 2014-11-14 11:56:33 -05:00
Nils Gladitz cc1139cc30 strings: Remove redundant calls to std::string::c_str()
Replacements were detected and performed by the clang tool
remove-cstr-calls on a linux build.
2014-10-15 14:54:05 +02:00
Brad King de8e534b41 Ninja: Limit custom command side-effects to build folder
Revert commit 7243c951 (Ninja: Don't limit custom cmd side-effects to
build folder, 2014-06-27) because it causes every custom command
dependency in the source tree to get a phony rule.  For large projects
these rules get too big for Ninja to handle efficiently.  While the
original change addressed a valid concern, it did not seem to occur
regularly in practice because well-behaved projects generate their
side-effects only in the build tree.  Until we support explicit
specification of side-effects (CMake issue #14963), we will have to use
this as a middle-ground.
2014-10-08 08:50:15 -04:00
Nils Gladitz 71da30cae0 Ninja: Fix variable duplication in RSP rules
Stream clear() resets stream state but does not actually clear its content.
2014-10-06 22:29:09 +02:00
Sylvain Joubert 9f32a2411b Ninja: Use 'console' pool for CMake re-run if possible (#14915)
The pre-defined 'console' pool is a non-buffered pool that runs with a
depth of 1.  CMake re-run cannot be run concurrently and it will
eventually output something.  A non-buffered pool allows to get it as
soon as possible

Also, generate the minimal required version of Ninja in the build file.
2014-10-03 08:48:47 -04:00
Sylvain Joubert 6120fca8e2 Ninja: Prevent compilers to be silently modified
Unlike with Unix Makefiles generator modifying compiler paths was not
protected with Ninja generator.  It was possible to modify them in the
cache without the expected effect on the generated solution.  Also
activate corresponding tests with Ninja.
2014-09-22 08:44:39 -04:00
Adam Strzelecki 7243c95129 Ninja: Don't limit custom cmd side-effects to build folder (#14972)
Actually custom command can write wherever it wants to, such as temporary
folder or source folder, possibly violating rules that only build folder should
be affected. Therefore we should consider custom command dependency at any path
as possible side effect adding phony rule.

We avoid adding phony rules for regular source files (since the paraent
commit) so we no longer need the in-build-tree test to avoid them.
2014-06-30 09:33:37 -04:00
Adam Strzelecki a33cf6d088 Ninja: Consider only custom commands deps as side-effects (#14972)
Since commit v2.8.12~248^2 (Ninja: Custom Command file depends don't
need to exist before building, 2013-06-07) all explicit dependencies
inside build folder were considered as possible build command
side-effects and phony rules were produced for them in case they don't
exist when starting to build. This is unnecessary since regular compile
inputs need to exist or cmake will fail.  Moreover the exception for
sources having GENERATED property that can be missing is already handled
by WriteAssumedSourceDependencies.

This fixes unwanted phony rules for all regular source files when doing
in-source build, causing Ninja not complain when such files gets missing,
i.e. during development. Also this reduces number of rules in ninja.build.

Now only custom command dependencies are considered as possible side-effects.
2014-06-30 09:33:37 -04:00
Brad King 0b028c6f0a Merge topic 'ninja-avoid-double-phony'
04377f1b Ninja: Remove CMake includes from explicit depends (#14972)
2014-06-16 08:54:46 -04:00
Adam Strzelecki 04377f1b31 Ninja: Remove CMake includes from explicit depends (#14972)
It may happen that CMake include is an explicit dependency for some command,
while all CMake includes are set phony in WriteTargetRebuildManifest, this may
lead to duplicate phony generate rules which causes ninja warnings.

We need to remove implicit CMake includes in WriteUnknownExplicitDependencies.

This fixes FindCUDA ninja warnings.
2014-06-16 08:51:38 -04:00
Ben Boeckel 01b79c6385 ninja: Don't use a stringstream to build an argument list
Streams are expensive to construct (looks like some locale-related
stuff), so use strings instead.
2014-05-02 13:22:19 -04:00
Stephen Kelly d83ef53a12 Rename local 'dir_max' variables to 'dir'
The code is not computing the maximum length directory, as is the
case in cmLocalVisualStudioGenerator::ComputeLongestObjectDirectory.
2014-03-17 15:27:01 +01:00
Stephen Kelly 6c9dd0ec7b cmGlobalGenerator: Make ComputeTargetObjects non-virtual
Implement it in terms of the ComputeObjectFilenames virtual method
on the local generators.

Remove the reimplementation from the global generators which are
now all functionally identical.
2014-03-15 09:30:24 +01:00
Stephen Kelly f6da044080 cmLocalGenerator: Add ComputeObjectFilenames interface.
Implement it in the local generators and use it in the global
generators.
2014-03-13 15:28:02 +01:00
Stephen Kelly 9ad804ac7b cmGeneratorTarget: Constify cmSourceFile* in containers.
Some of them will be used with other APIs which require value_type
to be cmSourceFile const*.
2014-03-13 15:27:23 +01:00
Stephen Kelly cd43433de5 cmGlobalGenerator: Extract a ComputeTargetObjectDirectory interface.
Make it public for future external calls.
2014-03-13 15:27:23 +01:00
Stephen Kelly 21c573f682 Remove some c_str() calls.
Use the clang RemoveCStrCalls tool to automatically migrate the
code. This was only run on linux, so does not have any positive or
negative effect on other platforms.
2014-03-11 15:03:50 +01:00
Ben Boeckel 6557382dcf stringapi: Use strings for program paths 2014-03-08 13:05:38 -05:00
Ben Boeckel 24b5e93de2 stringapi: Use strings for directories 2014-03-08 13:05:38 -05:00
Ben Boeckel 84fdc9921c stringapi: Pass configuration names as strings 2014-03-08 13:05:36 -05:00
Ben Boeckel 270eb96df0 strings: Remove cmStdString references
Casts from std::string -> cmStdString were high on the list of things
taking up time. Avoid such implicit casts across function calls by just
using std::string everywhere.

The comment that the symbol name is too long is no longer relevant since
modern debuggers alias the templates anyways and the size is a
non-issue since the underlying methods are generated since it's
inherited.
2014-03-08 13:05:35 -05:00
Ben Boeckel c3833c7da4 stringapi: Use strings for VS project names 2014-03-08 13:05:33 -05:00
Ben Boeckel fabf1fbabb stringapi: Use strings in target name 2014-03-08 13:05:31 -05:00
Brad King 2c426bfb2d Ninja: Normalize paths of CMake re-run rule dependencies
Send all implicit dependencies through ConvertToNinjaPath.
Add CMakeCache.txt before uniquifying the list.
2014-01-21 14:29:55 -05:00
Brad King 9465242d01 Merge topic 'ninja_fix_rerun'
20e595ab Revert "Ninja: Track configured files so we can regenerate them."
2014-01-16 09:24:15 -05:00
Brad King ce362f27d6 Merge topic 'revert-ninja_fix_rerun'
79859689 Revert "Ninja: Avoid re-running CMake on next build after regeneration"
2014-01-16 09:24:13 -05:00
Brad King 20e595aba8 Revert "Ninja: Track configured files so we can regenerate them."
Revert commit 4a6397a7 (Ninja: Track configured files so we can
regenerate them, 2013-06-17).  The files reported by the method
cmMakefile::GetOutputFiles() must cause CMake to re-run only if they are
missing and without considering a timestamp.  This is not the meaning of
the implicit dependencies field so Ninja re-runs CMake too often.

Another solution will have to be found to the original problem.
2014-01-15 16:37:25 -05:00
Brad King 7985968900 Revert "Ninja: Avoid re-running CMake on next build after regeneration"
Revert commit 6fac24d7 (Ninja: Avoid re-running CMake on next build
after regeneration, 2014-01-09).  The files reported by the method
cmMakefile::GetOutputFiles() must cause CMake to re-run only if they are
missing and without considering a timestamp.  Therefore they cannot be
listed as outputs of the re-run rule or Ninja will re-run CMake every
time because the timestamp of configure_file outputs does not change.

Another solution will have to be found to the original problem.
2014-01-15 16:33:22 -05:00
Brad King 020006f936 Merge topic 'ninja_fix_rerun'
6fac24d7 Ninja: Avoid re-running CMake on next build after regeneration
2014-01-13 10:23:23 -05:00
Robert Maynard 6fac24d750 Ninja: Avoid re-running CMake on next build after regeneration
In commit 4a6397a7 (Ninja: Track configured files so we can regenerate
them, 2013-06-17) we accidentally started listing files generated by
CMake as inputs to the configuration process instead of outputs from it.
Move the list of files generated by CMake to the regeneration rule
outputs section and tell Ninja to restat after running it.
2014-01-13 10:09:48 -05:00
Stephen Kelly 38de54cf6f cmGeneratorTarget: Add methods to access source file groups.
These methods and others will be able to get a config parameter
later to implement the INTERFACE_SOURCES feature.
2014-01-09 19:38:07 +01:00
Stephen Kelly ef25ba8d06 Constify handling of target dependencies. 2013-12-11 15:30:11 +01:00
Brad King 123a0608df Teach GenerateBuildCommand to find its own make program
Add a cmGlobalGenerator::SelectMakeProgram method to select a
caller-provided make program, the CMAKE_MAKE_PROGRAM cache entry, or a
generator-provided default.  Call it from all implementations of the
GenerateBuildCommand method with the corresponding generator's default,
if any.
2013-11-18 11:30:48 -05:00
Brad King 8904d1410b cmGlobalGenerator: Cleanup GenerateBuildCommand API
All cmGlobalGenerator::GenerateBuildCommand call sites that need to
produce a string now generate "cmake --build" commands.  The remaining
call sites immediately pass the result to cmSystemTools::RunSingleCommand.
Avoid the intermediate string and argument parsing by directly producing a
vector of strings.  Also drop the ignoreErrors argument because no call
sites remain that use it.
2013-11-18 08:26:21 -05:00
Brad King 684063c036 Refactor tool selection for edit_cache (#14544)
Refactor edit_cache tool selection to ask each global generator for its
preference.  Teach the Ninja generator to always use cmake-gui because
Ninja by design cannot run interactive terminal dialogs like ccmake.
Teach the Makefile generator to use cmake-gui when also using an "extra"
generator whose IDE has no terminal to run ccmake, and otherwise fall
back to CMAKE_EDIT_COMMAND selection for normal Makefile build systems.
2013-11-12 08:47:19 -05:00
Brad King e378bc6441 Merge topic 'ninja-use-deps'
eeb4aec Ninja: use deps = gcc/msvc feature
2013-10-28 08:38:40 -04:00
Peter Kümmel eeb4aece1c Ninja: use deps = gcc/msvc feature
cmcldeps is now only used for .rc file processing
2013-10-24 19:48:18 +02:00
Brad King 0c39a757da Drop the 'Full' field from cmDocumentationEntry
We need only 'Brief' for usage documentation.  We no longer have builtin
'Full' documentation, which is now in Help/*/*.rst files.
2013-10-16 09:22:37 -04:00
Stephen Kelly fe732264e9 Add the INTERFACE_LIBRARY target type.
This target type only contains INTERFACE_* properties, so it can be
used as a structural node. The target-specific commands enforce
that they may only be used with the INTERFACE keyword when used
with INTERFACE_LIBRARY targets. The old-style target properties
matching LINK_INTERFACE_LIBRARIES_<CONFIG> are always ignored for
this target type.

The name of the INTERFACE_LIBRARY must match a validity generator
expression. The validity is similar to that of an ALIAS target,
but with the additional restriction that it may not contain
double colons. Double colons will carry the meaning of IMPORTED
or ALIAS targets in CMake 2.8.13.

An ALIAS target may be created for an INTERFACE library.

At this point it can not be exported and does not appear in the
buildsystem and project files are not created for them. That may
be added as a feature in a later commit.

The generators need some changes to handle the INTERFACE_LIBRARY
targets returned by cmComputeLinkInterface::GetItems. The Ninja
generator does not use that API, so it doesn't require changes
related to that.
2013-10-07 19:56:31 -04:00
Brad King e6f93dc560 Merge topic 'windows_ninja_duplicate_paths'
a11da72 Ninja: Properly convert all paths to unix style before we do set intersection.
2013-07-24 11:02:33 -04:00
Robert Maynard a11da72e7b Ninja: Properly convert all paths to unix style before we do set intersection.
On windows we had a subset of the paths as unix style and a subset as windows
so when doing the set intersection it resulted in the same file being
found twice.
2013-07-22 10:42:37 -04:00
Clinton Stimpson 603bc5998f OS X: Fix regression handling frameworks for Ninja
Fix a regression created by commit 373faae5 (Refactor how bundles and
frameworks are supported, 2013-05-05).

Since the ninja file isn't aware of how framework symlinks work, we
suppress symlink creation and let cmOSXBundleGenerator handle it.  Also,
use the real name of framework library in build rules as was done
before, instead of the symlink.
2013-07-22 09:40:11 -04:00
Robert Maynard 539356f128 Ninja: Custom Command file depends don't need to exist before building
When converting custom commands for the ninja build system we
need to make sure that any file dependencies that exist in the build
tree are converted to phony targets. This tells ninja that these
files might not exist when starting the build, but could be generated
during the build.

This is done by tracking all dependencies for custom command targets.
After all have been written out we remove all items from the set
that have been seen as a target, custom command output, an alias,
or a file in the source directory. Anything that is left is considered
to be a file that will be generated as a side effect of another
custom command.
2013-07-01 09:01:01 -04:00
Robert Maynard 874e17120d Ninja: GlobalNinjaGenerator WriteBuild and WritePhonyBuild non static
To properly track the usage of dependencies that are generated at
compile time as the side effect of other build steps we need
to make the WriteBuild and WritePhonyBuild commands non static
2013-07-01 08:59:38 -04:00
Robert Maynard 4a6397a70c Ninja: Track configured files so we can regenerate them.
Unlike the Makefile generator the ninja generator did not tack any of
its output files, so if they are deleted the generator would not run.
2013-06-25 08:51:20 -04:00
Petr Kmoch de8be9ef7d Add projectDir parameter to GenerateBuildCommand
Extend the cmGlobalGenerator::GenerateBuildCommand virtual method
signature with a "projectDir" parameter specifying the top of the
project build tree for which the build command will be generated.
Populate it from call sites in cmGlobalGenerator::Build where a
fully-generated build tree should be available.
2013-04-12 11:35:35 -04:00
Brad King a95968fec9 Merge topic 'ninja-escape-line-breaks'
3b4436a Ninja: escape line breaks in literals
2013-03-13 13:42:00 -04:00
Peter Kümmel 2271ca3496 Ninja: the Ninja generator does not support Fortran yet. 2013-03-10 11:36:57 +01:00
Peter Kümmel 3b4436aa90 Ninja: escape line breaks in literals
BUG: 13591
2013-03-09 12:06:24 +01:00
Peter Kümmel 751f712e1a Ninja: use MinGW generator code in EnableLanguage() 2013-03-09 11:28:45 +01:00
Patrick Gansterer 5170a8800f Make cmGlobalGenerator::GetDocumentation() a static function
Making the function static allows us to call it directly,
without creating and removing an instance of the generator.
2012-11-19 12:54:50 -05:00
Peter Kümmel f1670ab18a Ninja: don't confuse ninja's rsp files with nmake's
Move response files into CMakeFiles/ which makes them different to nmake's.
2012-09-28 12:33:57 +02:00