Add ctest command-line options:
--test-output-size-passed <n>
--test-output-size-failed <n>
to set the amount of test output to store in Test.xml as a command-line
dashboard client.
Add documentation and tests for the existing
CTEST_CUSTOM_MAXIMUM_PASSED_TEST_OUTPUT_SIZE
CTEST_CUSTOM_MAXIMUM_FAILED_TEST_OUTPUT_SIZE
CTest variables.
In CMake 3.0, the load_command command was deprecated. However, the
position of load_command in the help TOC was not fixed at that time:
it was still listed as a "Normal Command".
Improve formatting, primarily by:
* Adding links to relevant commands, properties, generators, and so on.
* Converting code, symbols, paths, and so on to fixed-width fonts.
* Hard wrapping lines to 80 characters or less.
Use the CMAKE_LINK_SEARCH_START_STATIC and CMAKE_LINK_SEARCH_END_STATIC
variables to initialize the LINK_SEARCH_START_STATIC and
LINK_SEARCH_END_STATIC target properties respectively.
if(TEST TestNameThatExists) will return true if a test with the name
TestNameThatExists has been added with add_test. The syntax is similar
to if(TARGET TargetName). Since use of "TEST" as an argument to if()
could previously be interpreted as a non-keyword argument, add policy
CMP0064 to treat it as a keyword as NEW behavior.
Refactor the -Wdev and -Wno-dev to use a generic -W parser that follows
the GCC pattern. Include support for setting CMAKE_ERROR_DEPRECATED and
CMAKE_WARN_DEPRECATED via the deprecated warning. Add -Werror=dev and
-Wno-error=dev options so that dev warning options are in line with
deprecated warning options. Use a new CMAKE_SUPPRESS_DEVELOPER_ERRORS
internal cache entry to store the above new dev options persistently.
Add tests for new options and updated cmake documentation and release
notes to list new options.
The --trace option is helpful, but sometimes, what you're looking for is
deep under many layers of function calls and figuring out what instance
of the function call you're looking at is tedious to determine (usually
involving patching and message()). Instead, add a --trace-expand option
to trace while expanding commands into what CMake actually sees.
Add variable CTEST_CHANGE_ID to configure the setting. This allows
CTest clients to give CDash information about what change is being
tested so that CDash can take actions to report the results (e.g. to a
pull request page).
Extend the Nsight Tegra project generator to add bunch of properties
with the backing variables to fine-tune the generated projects.
Add target properties that map to all "Configuration" PropertyGroups for
each configuration:
* ANDROID_ARCH
* ANDROID_STL_TYPE
Add target properties that map to the AntBuild section of vcxproj files:
* ANDROID_ANT_ADDITIONAL_OPTIONS
* ANDROID_ASSETS_DIRECTORIES
* ANDROID_JAR_DEPENDENCIES
* ANDROID_JAR_DIRECTORIES
* ANDROID_JAVA_SOURCE_DIR
* ANDROID_NATIVE_LIB_DEPENDENCIES
* ANDROID_NATIVE_LIB_DIRECTORIES
* ANDROID_PROCESS_MAX
* ANDROID_PROGUARD
* ANDROID_PROGUARD_CONFIG_PATH
* ANDROID_SECURE_PROPS_PATH
* ANDROID_SKIP_ANT_STEP
Reviewed-by: Dmitry Polyanitsa <dpolyanitsa@nvidia.com>
Add a TARGET_MESSAGES property to control whether Makefile targets print
the "Built target " completion messages. Default to ON to preserve
existing behavior.
8f86407c Windows: Optionally generate DLL module definition files automatically
069aa93b bindexplib: Add support for "/bigobj" format objects
61bbbdcf bindexplib: Fix treatment of some symbols
de70c922 bindexplib: Teach DumpFile to return errors
8ea69dfe bindexplib: Build source as part of CMakeLib
2963cb2a bindexplib: Wrap long lines
4ff09893 bindexplib: Drop code that CMake does not need
7de8276c bindexplib: Add copyright/license notice block
65086ad7 bindexplib: Import original implementation from CERN
Create target property WINDOWS_EXPORT_ALL_SYMBOLS to automatically
generate a module definition file from MS-compatible .obj files and give
it to the linker in order to export all symbols from the .dll part of a
SHARED library.
Add a TestLoad setting to CTest that can be set via a new --test-load
command-line option, CTEST_TEST_LOAD variable, or TEST_LOAD option to
the ctest_test command. Teach cmCTestMultiProcessHandler to measure
the CPU load and avoid starting tests that may take more than the
spare load currently available. The expression
<current_load> + <test_processors> <= <max-load>
must be true to start a new test.
Co-Author: Zack Galbreath <zack.galbreath@kitware.com>
Create a <LANG>_COMPILER_LAUNCHER target property (initialized by a
CMAKE_<LANG>_COMPILER_LAUNCHER variable) to specify a compiler launcher
tool. This will supersede the CMAKE_<LANG>_COMPILER_ARG1 approach to
using such tools. The old approach set CMAKE_<LANG>_COMPILER to the
launcher tool while the new approach leaves this variable set to the
actual compiler.
Implement this property for Makefile and Ninja generators. It cannot be
implemented for VS or Xcode generators as the IDE build tools offer no
such hooks.
The most likely documentation page a project author will read in
response to a policy warning is the page for the policy itself.
Add to every policy documentation page a note explicitly stating
that the OLD behavior is deprecated. Also mention this in the
cmake_policy() command documentation that explains how to set a
policy to OLD.
Suggested-by: Fraser Hutchison <fraser.hutchison@gmail.com>
target_link_libraries() is being used in the example code but
target_include_directories() was probably meant to be used. The sentence
that starts with "Consuming code then" indicates that the example is
about using the appropriate include directory.
The <LANG>_VISIBILITY_PRESET and VISIBILITY_INLINES_HIDDEN were first
merged in commit v2.8.12~322 (Merge topic 'VISIBILITY_PRESET-property',
2013-06-05) but worked only for shared libraries and executables with
exports. Prior to commit v3.0.0-rc1~581^2 (GenerateExportHeader:
Deprecate add_compiler_export_flags function., 2013-09-02) the
add_compiler_export_flags function was used to add visibility flags to
all targets.
The visibility flags are useful for sources in all target types because
they may be later linked into shared libraries or executables with
exports. Introduce policy CMP0063 to enable them for all target types
while preserving compatibility with existing projects that do not expect
this.
This reverts commit f85db2f323.
Discussion by the QtCreator community at
https://bugreports.qt.io/browse/QTCREATORBUG-13695
raises concerns about this particular approach to working with CMake
projects using QtCreator. Also, the functionality and design of the QBS
extra generator was never discussed on the CMake mailing list or with
QtCreator developers. There may be better ways to make the two tools
work together.
In order to avoid committing to long-term support of this generator
prior to such discussion taking place, revert it from CMake for now.
We may restore this or use an alternative design based on results of
such discussion.
Always show the option with its argument separate in summary text.
State in the main documentation that the option and its argument can be
given together too.
Create a <LANG>_INCLUDE_WHAT_YOU_USE target property (initialized by a
CMAKE_<LANG>_INCLUDE_WHAT_YOU_USE variable) to specify an IWYU command
line to be run along with the compiler.
Add sections to the cmake-buildsystem(7) manual and cross-reference
them with relevant variables and target properties. This avoids
duplicating the information and allows it to be more detailed.
The documentation of this variable in the CTest module is outdated
and has been superseded by the ctest(1) manual. In particular, the
latter mentions that it works with the Ninja generator as well as
makefile generators. Remove the documentation from the CTest module
and replace it with a link to the main variable documentation (which
already references the ctest(1) manual).
66b641f4 Help: Add notes for topic 'add-GreenHills-MULTI-generator'
48004d9d Add a 'Green Hills MULTI' generator on Windows
051d8be1 cmLocalGenerator: Constify some cmTarget and cmGeneratorTarget arguments
Brad King
Roman Wüger
Stephen Kelly
James Johnston
Chuck Atkins
Matt McCormick
Michael Scott
Ben Boeckel
Clifford Yapp
Zack Galbreath
Mikhail Filimonov
Michael Ensslin
Bill Hoffman
Betsy McPhail
Erik Sjölund
Robert Goulet