Use cmComputeLinkInformation::GetFrameworkPaths to get the list of
framework paths needed by the linker. Drop the now unused framework
information from the old-style cmTarget link dependency analysis.
The ComputePDBOutputDir added by commit 3f60dbf1 (Add
PDB_OUTPUT_DIRECTORY and PDB_NAME target properties, 2012-09-25) falls
back to the current binary directory instead of the target output
directory as before. When no PDB_OUTPUT_DIRECTORY property is set we
instead should fall back to the target output directory where .pdb files
used to go before the new property was added.
2ccca05 Run PDBDirectoryAndName test on MSVC and Intel
efc83b3 Document that PDB_(NAME|OUTPUT_DIRECTORY) are ignored for VS 6
b294457 Verify that PDB_(NAME|OUTPUT_DIRECTORY) are honored in test
3f60dbf Add PDB_OUTPUT_DIRECTORY and PDB_NAME target properties (#10830)
This enables changing the name and output folder of the debug symbol
files produced by MS compilers.
Inspired-by: Thomas Bernard <thomas.bernard@ipetronik.com>
This reverts commit 987e12e2f9.
GenerateTargetManifest is called by the global generator before it
creates the generator targets, so we can't move it to cmGeneratorTarget
yet.
Add a boolean target property NO_SONAME which may be used to disable
soname for the specified shared library or module even if the platform
supports it. This property should be useful for private shared
libraries or various plugins which live in private directories and have
not been designed to be found or loaded globally.
Replace references to <CMAKE_SHARED_LIBRARY_SONAME_${LANG}_FLAG> and
hard-coded -install_name flags with a conditional <SONAME_FLAG> which is
expanded to the value of the CMAKE_SHARED_LIBRARY_SONAME_${LANG}_FLAG
definition as long as soname supports is enabled for the target in
question. Keep expanding CMAKE_SHARED_LIBRARY_SONAME_${LANG}_FLAG in
rules in case third party projects still use it. Such projects would
not yet use NO_SONAME so the adjacent <TARGET_SONAME> will always be
expanded. Make <TARGET_INSTALLNAME_DIR> NO_SONAME aware as well. Since
-install_name is soname on OS X, this should not be a problem if this
variable is expanded only if soname is enabled.
The Ninja generator performs rule variable substitution only once
globally per rule to put its own placeholders. Final substitution is
performed by ninja at build time. Therefore we cannot conditionally
replace the soname placeholders on a per-target basis. Rather than
omitting $SONAME from rules.ninja, simply do not write its contents for
targets which have NO_SONAME. Since 3 variables are affected by
NO_SONAME ($SONAME, $SONAME_FLAG, $INSTALLNAME_DIR), set them only if
soname is enabled.
For now do not allow an OBJECT library to reference other object
libraries. Teach cmTarget::ComputeLinkImplementation to include the
languages of object libraries used by a target.
This library type can compile sources to object files but does not link
or archive them. It will be useful to reference from executable and
normal library targets for direct inclusion of object files in them.
Diagnose and reject the following as errors:
* An OBJECT library may not be referenced in target_link_libraries.
* An OBJECT library may contain only compiling sources and supporting
headers and custom commands. Other source types that are not normally
ignored are not allowed.
* An OBJECT library may not have PRE_BUILD, PRE_LINK, or POST_BUILD
commands.
* An OBJECT library may not be installed, exported, or imported.
Some of these cases may be supported in the future but are not for now.
Teach the VS generator that OBJECT_LIBRARY targets are "linkable" just
like STATIC_LIBRARY targets for the LinkLibraryDependencies behavior.
d662dff Fix shadowed variable warning on dashboard results
f66e735 Fix compiler warning reported on older Borland dashboard.
d90eed4 Fix compiler error reported on older Borland dashboard.
8233636 Update the documentation regarding INCLUDE_DIRECTORIES.
d899eb7 Call ExpandVariablesInString for each target's INCLUDE_DIRECTORIES
c21db87 Make search paths ordered and unique
22021f0 Remove cmMakefile::GetIncludeDirectories
9106b56 Extract and use the INCLUDE_DIRECTORIES target properties.
840509b Keep the INCLUDE_DIRECTORIES target property up to date.
a4d5f7b Add API to get the ordered includes for a target.
8adaee2 CMake: Eliminate cmMakefile::IncludeDirectories
7620932 Remove include flags memoization.
97a5faa Make it safe to call this method without creating duplicates.
edd5303 Refactor GetIncludeFlags to take includes instead of fetching them
Remove partial implementation added by commit ca0230a3 (check in initial
conv library stuff, 2007-02-16) since it was never finished. It does
not make sense for multi-configuration generators since no specific
build configuration is processed at CMake time.
The purpose of the TargetType enumeration was overloaded for install
type because install rules were once recorded as targets. Factor the
install types out into their own enumeration.
Teach the Windows-GNU.cmake platform file to look for Visual Studio
tools matching the target ABI. Add an extra step to the link command
for shared libraries and executables that export symbols and on which a
new GNUtoMS property is set (initialized by the CMAKE_GNUtoMS option).
Tell the GNU linker to output a module definition (.def) file listing
exported symbols in addition to the GNU-format import library (.dll.a).
Pass the .def file to the MS "lib" tool to construct a MS-format DLL
import library (.lib).
Teach the install(TARGETS) command to install the MS import library next
to the GNU one. Teach the install(EXPORT) and export() command to set
the IMPORTED_IMPLIB property pointing at the import library to use the
import library matching the tools in the importing project.
Make it a static method instead of an array. It is safer for the
type checking and if we add a new target type we will be warned to add
a case to the switch.
set_property() has APPEND, which creates a list. E.g. when
appending to COMPILE_FLAGS a string is needed, not a list.
With the APPEND_STRING option the value is append as string,
not as list.
Alex
The CMAKE_OSX_ARCHITECTURES variable works only as a global setting.
This commit defines target properties
OSX_ARCHITECTURES
OSX_ARCHITECTURES_<CONFIG>
to specify OS X architectures on a per-target and per-configuration
basis. See issue #8725.
In cmTarget we compute the link implementation, link interface, and link
closure structures on-demand and cache the results. This commit teaches
cmTarget to invalidate results after a LINK_INTERFACE_* property changes
or a new link library is added. We also clear the results at the end of
the Configure step to ensure the Generate step uses up-to-date results.
In cmTarget::SetProperty and cmTarget::AppendProperty we check whether
changing the property invalidates cached information. The check was
duplicated in the two methods, so this commit moves the check into a
helper method called from both.
This method is called during ConfigureFinalPass on every target. It
gives each target a chance to do some final processing after it is known
that no more commands will affect it. Currently we just call the old
AnalyzeLibDependencies that used to be called directly.
This creates cmTarget::GetFeature and cmMakefile::GetFeature methods to
query "build feature" properties. These methods handle local-to-global
scope and per-configuration property lookup. Specific build features
will be defined later.
This converts the CMake license to a pure 3-clause OSI-approved BSD
License. We drop the previous license clause requiring modified
versions to be plainly marked. We also update the CMake copyright to
cover the full development time range.
In each target we trace dependencies among custom commands to pull in
all source files and build rules necessary to complete the target. This
commit teaches cmTarget to save the inter-source dependencies found
during its analysis. Later this can be used by generators that need to
topologically order custom command rules.
This teaches cmTarget to use a set of cmSourceFile pointers to guarantee
unique insertion of source files in a target. The order of insertion is
still preserved in the SourceFiles vector.
We create target property "LINK_INTERFACE_MULTIPLICITY" and a per-config
version "LINK_INTERFACE_MULTIPLICITY_<CONFIG>". It sets the number of
times a linker should scan through a mutually dependent group of static
libraries. The largest value of this property on any target in the
group is used. This will help projects link even for extreme cases of
cyclic inter-target dependencies.
We creates methods IsDLLPlatform() and HasImportLibrary(). The former
returns true on Windows. The latter returns whether the target has a
DLL import library. It is true on Windows for shared libraries and
executables with exports.
This teaches cmTarget to account for the languages compiled into link
dependencies when determining the linker language for its target.
We list the languages compiled into a static archive in its link
interface. Any target linking to it knows that the runtime libraries
for the static archive's languages must be available at link time. For
now this affects only the linker language selection, but later it will
allow CMake to automatically list the language runtime libraries.
This passes the build configuration to most GetLinkerLanguage calls. In
the future the linker language will account for targets linked in each
configuration.
The new method centralizes loops that process raw OriginalLinkLibraries
to extract the link implementation (libraries linked into the target)
for each configuration. Results are computed on demand and then cached.
This simplifies link interface computation because the default case
trivially copies the link implementation.
These member structures are accessed only in the cmTarget implementation
so they do not need to be defined in the header. This cleanup also aids
Visual Studio 6 in compiling them.
This method previously required the global generator to be passed, but
that was left from before cmTarget had its Makefile member. Now the
global generator can be retrieved automatically, so we can drop the
method argument.
When LINK_INTERFACE_LIBRARIES is not set we use the link implementation
to implicitly define the link interface. These changes centralize the
decision so that all linkable targets internally have a link interface.
This moves code implementing policy CMP0004 into cmTarget::CheckCMP0004.
The implementation is slightly simpler and can be re-used outside of
cmComputeLinkDepends.
This fixes cmTarget::GetLinkInterface to compute and return the link
interface in an exception-safe manner. We manage the link interface
returned by cmTarget::ComputeLinkInterface using auto_ptr.
This creates cmTarget::GetOutputInfo to compute, cache, and lookup
target output directory information on a per-configuration basis. It
avoids re-computing the information every time it is needed.
Internally cmTarget was passing the target type in several name
computation signatures to support computation of both shared and static
library names for one target. We no longer need to compute both names,
so this change simplifies the internals by using the GetType method and
dropping the type from method signatures.
This property was left from before CMake always linked using full path
library names for targets it builds. In order to safely link with
"-lfoo" we needed to avoid having both shared and static libraries in
the build tree for targets that switch on BUILD_SHARED_LIBS. This meant
cleaning both shared and static names before creating the library, which
led to the creation of CLEAN_DIRECT_OUTPUT to disable the behavior.
Now that we always link with a full path we do not need to clean old
library names left from an alternate setting of BUILD_SHARED_LIBS. This
change removes the CLEAN_DIRECT_OUTPUT property and instead uses its
behavior always. It removes some complexity from cmTarget internally.
This creates target properties ARCHIVE_OUTPUT_NAME, LIBRARY_OUTPUT_NAME,
and RUNTIME_OUTPUT_NAME, and per-configuration equivalent properties
ARCHIVE_OUTPUT_NAME_<CONFIG>, LIBRARY_OUTPUT_NAME_<CONFIG>, and
RUNTIME_OUTPUT_NAME_<CONFIG>. They allow specification of target output
file names on a per-type, per-configuration basis. For example, a .dll
and its .lib import library may have different base names.
For consistency and to avoid ambiguity, the old <CONFIG>_OUTPUT_NAME
property is now also available as OUTPUT_NAME_<CONFIG>.
See issue #8920.
This creates method cmTarget::GetOutputTargetType to compute the output
file type 'ARCHIVE', 'LIBRARY', or 'RUNTIME' from the platform and
target type. It factors out logic from the target output directory
computation code for later re-use.
This creates method cmTarget::GetSupportDirectory to compute a
target-specific support directory in the build tree. It uses the
"CMakeFiles/<name>.dir" convention already used by the Makefile
generators. The method will be useful for any code that needs to
generate per-target information into the build tree for use by CMake
tools that do not run at generate time.
The LINK_INTERFACE_LIBRARIES target property may not contain the
"debug", "optimized", or "general" keywords. These keywords are
supported only by the target_link_libraries (and link_libraries) command
and are not a generic library list feature in CMake. When a user
attempts to add one of these keywords to the property value, we now
produce an error message that refers users to alternative means.
When creating an IMPORTED target for a library that has been found on
disk, it may not be known whether the library is STATIC or SHARED.
However, the library may still be linked using the file found from disk.
Use of an IMPORTED target is still important to allow per-configuration
files to be specified for the library.
This change creates an UNKNOWN type for IMPORTED library targets. The
IMPORTED_LOCATION property (and its per-config equivalents) specifies
the location of the library. CMake makes no assumptions about the
library that cannot be inferred from the file on disk. This will help
projects and find-modules import targets found on disk or specified by
the user.
This change introduces policy CMP0008 to decide how to treat full path
libraries that do not appear to be valid library file names. Such
libraries worked by accident in the VS IDE and Xcode generators with
CMake 2.4 and below. We support them in CMake 2.6 by introducing this
policy. See policy documentation added by this change for details.
- Previously this was done implicitly by the check for a target
link language which checked all source full paths.
- The recent change to support computing a link language without
finding all the source files skipped the implicit check.
- This change adds an explicit check to find all source files.
- Place the built library in foo.framework/Versions/A/foo
- Do not create unused content symlinks (like PrivateHeaders)
- Do not use VERSION/SOVERSION properties for frameworks
- Make cmTarget::GetDirectory return by value
- Remove the foo.framework part from cmTarget::GetDirectory
- Correct install_name construction and conversion on install
- Fix MACOSX_PACKAGE_LOCATION under Xcode to use the
Versions/<version> directory for frameworks
- Update the Framework test to try these things
- Policy is WARN by default so projects will build
as they did in 2.4 without user intervention
- Remove CMAKE_LINK_OLD_PATHS variable since it was
never in a release and the policy supercedes it
- Report target creation backtrace in warning message
since policy should be set by that point
- Add cmListFileBacktrace to record stack traces
- Move main IssueMessage method to the cmake class instance
(make the backtrace an explicit argument)
- Change cmMakefile::IssueMessage to construct a backtrace
and call the cmake instance version
- Record a backtrace at the point a target is created
(useful later for messages issued by generators)
- Add cmSystemTools::ChangeRPath method
- Add undocumented file(CHRPATH) command
- When installing use file(CHRPATH) to change the rpath
instead of relinking
- Remove CMAKE_CHRPATH lookup from CMakeFindBinUtils
- Remove CMAKE_USE_CHRPATH option since this should
always work
- Use linker search path -L.. -lfoo for lib w/out soname
when platform sets CMAKE_PLATFORM_USES_PATH_WHEN_NO_SONAME
- Rename cmOrderRuntimeDirectories to cmOrderDirectories
and generalize it for both soname constraints and link
library constraints
- Use cmOrderDirectories to order -L directories based
on all needed constraints
- Avoid processing implicit link directories
- For CMAKE_OLD_LINK_PATHS add constraints from libs
producing them to produce old ordering
- Motivation:
- It depended on the order of installation
- It supported only a single destination for each target
- It created directory portions of an install name without user request
- Updated ExportImport test to install targets in an order that expoed
this bug
- Split IMPORTED_LINK_LIBRARIES into two parts:
IMPORTED_LINK_INTERFACE_LIBRARIES
IMPORTED_LINK_DEPENDENT_LIBRARIES
- Add CMAKE_DEPENDENT_SHARED_LIBRARY_MODE to select behavior
- Set mode to LINK for Darwin (fixes universal binary problem)
- Update ExportImport test to account for changes
- Shared libs and executables with exports may now have
explicit transitive link dependencies specified
- Created LINK_INTERFACE_LIBRARIES and related properties
- Exported targets get the interface libraries as their
IMPORTED_LINK_LIBRARIES property.
- The export() and install(EXPORT) commands now give
an error when a linked target is not included since
the user can change the interface libraries instead
of adding the target.
- Imported bundles have the MACOSX_BUNDLE property set
- Added cmTarget::IsAppBundleOnApple method to simplify checks
- Document BUNDLE keyword in INSTALL command
- Updated IMPORTED_LOCATION property documentation for bundles
- Updated ExportImport test to test bundles
- Imported frameworks have the FRAMEWORK property set
- Added cmTarget::IsFrameworkOnApple method to simplify checks
- Also remove separate IMPORTED_ENABLE_EXPORTS property and just use ENABLE_EXPORTS since, like FRAMEWORK, it just represents the target type.
- Document FRAMEWORK keyword in INSTALL command.
- Updated IMPORTED_LOCATION property documentation for Frameworks
- Created cmExportFileGenerator hierarchy to implement export file generation
- Installed exports use per-config import files loaded by a central one.
- Include soname of shared libraries in import information
- Renamed PREFIX to NAMESPACE in INSTALL(EXPORT) and EXPORT() commands
- Move addition of CMAKE_INSTALL_PREFIX to destinations to install generators
- Import files compute the installation prefix relative to their location when loaded
- Add mapping of importer configurations to importee configurations
- Rename IMPORT targets to IMPORTED targets to distinguish from windows import libraries
- Scope IMPORTED targets within directories to isolate them
- Place all properties created by import files in the IMPORTED namespace
- Document INSTALL(EXPORT) and EXPORT() commands.
- Document IMPORTED signature of add_executable and add_library
- Enable finding of imported targets in cmComputeLinkDepends
- This is purely an implementation improvement. No interface has changed.
- Create cmComputeLinkInformation class
- Move and re-implement logic from:
cmLocalGenerator::ComputeLinkInformation
cmOrderLinkDirectories
- Link libraries to targets with their full path (if it is known)
- Dirs specified with link_directories command still added with -L
- Make link type specific to library names without paths
(name libfoo.a without path becomes -Wl,-Bstatic -lfoo)
- Make directory ordering specific to a runtime path computation feature
(look for conflicting SONAMEs instead of library names)
- Implement proper rpath support on HP-UX and AIX.
installing without having to link the target again -> can save a lot of time
chrpath is handled very similar to install_name_tool on the mac. If the
RPATH in the build tree file is to short, it is padded using the separator
character.
This is currently disabled by default, it can be enabled using the option
CMAKE_USE_CHRPATH. There are additional checks whether it is safe to enable
it. I will rework them and use FILE(READ) instead to detect whether the
binaries are actually ELF files.
chrpath is available here
http://www.tux.org/pub/X-Windows/ftp.hungry.com/chrpath/
or kde svn (since a few days): http://websvn.kde.org/trunk/kdesupport/chrpath/
Alex
CMake-SourceFile2-bp and CMake-SourceFile2-b-mp1 to trunk. This
commit is surrounded by tags CMake-SourceFile2-b-mp1-pre and
CMake-SourceFile2-b-mp1-post on the trunk.
The changes re-implement cmSourceFile and the use of it to allow
instances to be created much earlier. The use of cmSourceFileLocation
allows locating a source file referenced by a user to be much simpler
and more robust. The two SetName methods are no longer needed so some
duplicate code has been removed. The strange "SourceName" stuff is
gone. Code that created cmSourceFile instances on the stack and then
sent them to cmMakefile::AddSource has been simplified and converted
to getting cmSourceFile instances from cmMakefile. The CPluginAPI has
preserved the old API through a compatibility interface.
Source lists are gone. Targets now get real instances of cmSourceFile
right away instead of storing a list of strings until the final pass.
TraceVSDependencies has been re-written to avoid the use of
SourceName. It is now called TraceDependencies since it is not just
for VS. It is now implemented with a helper object which makes the
code simpler.
GetLocaGenerators(cmLocalGenerators) from cmGlobalGenerator(). Now there is
one const accessor which is even faster since it returns a reference
(instead of copying a vector)
-more const to ensure that this the returned local generators don't actually
get modified
-removed duplicated code in GetCTestCommand() and GetCPackCommand()
-added some const accessors
Alex
"imported" executable target. This can then be used e.g. with
ADD_CUSTOM_COMMAND() to generate stuff. It adds a second container for
"imported" targets, and FindTarget() now takes an additional argument bool
useImportedTargets to specify whether you also want to search in the
imported targets or only in the "normal" targets.
Alex
add_custom_target() as COMMAND, and cmake will recognize them and replace
them with the actual output path of these executables. Also the dependency
will be added automatically. Test included.
ENH: moved TraceVSDependencies() to the end of GlobalGenerator::Configure(),
so it is done now in one central place
Alex
fix many bugs related to target names being computed inconsistently.
- Centralized computation of a target's file name to a method in
cmTarget. Now that global knowledge is always available the
*_CMAKE_PATH cache variables are no longer needed.
- Centralized computation of link library command lines and link
directory search order.
- Moved computation of link directories needed to link CMake targets
to be after evaluation of linking dependencies.
This also removed alot of duplicate code in which each version had its
own bugs.
This commit is surrounded by the tags
CMake-TargetNameCentralization1-pre
and
CMake-TargetNameCentralization1-post
so make the large set of changes easy to identify.