Refactor the local generator creation API to accept a
cmState::Snapshot. Adjust MakeLocalGenerator to use the 'current'
snapshot in cases where there is no parent. Create the snapshot
for subdirectories in cmMakefile::AddSubdirectory.
This means that snapshots are now created at the point of extending the tree,
as appropriate, and independently of the cmLocalGenerator and cmMakefile they
represent the state for.
8dc3a67c cmMakefile: Out-of-line the directory methods.
0f3c8cfa cmMakefile: Use method abstraction to access directories.
b288a997 cmMakefile: Rename SetStart* directory API to SetCurrent*.
932d53bc cmMakefile: Remove redundant method duplication.
32b8f03a cmMakefile: Port users of GetStart* methods to new names.
54d6a918 cmMakefile: Rename GetCurrent{Output,Binary}Directory.
55d80d0a cmMakefile: Rename GetCurrent{,Source}Directory.
b23cf06f cmake: Remove redundant start directories.
fcf246ac cmMakefile: Populate Home directories on initialize.
8878bea7 cmake: Initialize Home directories on cmake for find-package mode.
044dc815 Use the Home directories from the cmake class where intended.
d67e8f24 cmake: Fix directory used to find the cache
1ea085d1 cmMakefile: Initialize dir definitions early.
f034bb2f Remove redundant calls to MakeStartDirectoriesCurrent.
3a68c323 cmMakefile: Fix wrong parameter names.
Extend the RunSingleCommand signature to capture stdout and stderr
separately. Allow both to be captured to the same std::string
to preserve existing behavior. Update all call sites to do this
so that this refactoring does not introduce functional changes.
6693590f Xcode: Refine quoting rules for Strings
a6331eb8 Xcode: Let PrintComment decide if the comment is non-empty
6e8952c1 Xcode: PrintComment will prepend a whitespace itself before the comment
4bd2544b Xcode: Do not add whitespace after attribute group opening brace
5cb4c838 Xcode: Properly indent PBXFileReference and PBXBuildFile
a723427b Xcode: Remove extra space in PBXProject comment
2fe8bca5 Xcode: Add comment after root object
2e0e205e Xcode: Indent using tabs
7b68c8df Xcode: Sort Xcode objects by Id
this patch series aims to minimize deltas between the CMake Xcode
generator and Xcode itself. It was started by the observation that
if one makes any change to the project within Xcode (e.g. to see
how a variable is called internally) the user cannot diff the CMake
project and the one stored by Xcode afterwards.
Xcode keeps the objects ordered by the object id.
Because cmake stores them into an unordered container
at creation time they must be sorted before writing the
pbxproj file.
I tested this series with Xcode 6.3 and Xcode 3.2. Both show a
reduced diff after this series was applied.
This topic was never tested without some follow-up commits. The
GetCacheEntryValue API returns a pointer to memory freed on return.
It will have to be revised along with the rest of the original topic.
Teach the Xcode generator that ONLY_ACTIVE_ARCH=YES means to use ARCHS,
and that the default of ONLY_ACTIVE_ARCH=NO means to use NATIVE_ARCH and
ignore ARCHS. In the latter case there is no reason to generate ARCHS.
The Ninja build system does not support a in-file verbositiy switch.
Instead teach 'cmake --build' to extract the CMAKE_VERBOSE_MAKEFILE
setting and pass it as an optional '-v' argument to Ninja. This can
serve as a reasonable fallback.
Signed-off-by: Gregor Jasny <gjasny@googlemail.com>
The "cmakexbuild" wrapper is not needed for Xcode 4 and above, and the
path to it may change when CMake moves. Avoid storing a specific path
to a build program in CMakeCache.txt and instead compute the value for
CMAKE_MAKE_PROGRAM on demand. However, if a user does set the value
explicitly then honor it.
This does for Xcode what commit v3.0.0-rc1~260^2~4 (VS: Switch to
internal CMAKE_MAKE_PROGRAM lookup by generators, 2013-11-15) did for
Visual Studio generators.
Extend the change made in commit v3.0.0-rc1~260^2~16 (Teach
GenerateBuildCommand to find its own make program, 2013-11-13) to have
the Xcode generator pick between "xcodebuild" and CMake's own copy of
"cmakexbuild" at build time based on the version of Xcode.
Teach the Xcode generator to compute the location of this tool or the
cmakexbuild wrapper. Add internal APIs to get the locations on demand.
Use the "cmakexbuild" wrapper for Xcode < 4, and "xcodebuild" for modern
Xcode.
The default target in XCode is the first one in the file.
In commit v3.1.0-rc1~286^2 (cmTarget: use a hash_map for cmTargets
typedef, 2014-06-10) the order of the targets stored in cmMakefile was
made non-deterministic instead of lexicographic. Teach the Xcode
generator to do its own sorting to restore a predictable order.
While at it, place ALL_BUILD first (as is done in VS IDE generators)
explicitly in the comparison function so that it is the default target
even if other targets sort earlier lexicographically (e.g. "AAA").
In commit v3.1.0-rc1~687^2~4 (cmTarget: Make the source files depend on
the config, 2014-02-13) an early termination case was added to the Xcode
generator. Fix handling of this case to actually abort all the
generation steps. Otherwise some of the later steps are attempted
without the preconditions normally established by earlier steps,
possibly leading to a crash.
Narrow down the decision if a CFBundle is built to one place.
This is a preparation patch to add another target property
which, if set, will imply BUNDLE. Having only one function
which will have to look at both properties helps to keep code
clean.
Signed-off-by: Gregor Jasny <gjasny@googlemail.com>
The Xcode generator uses Makefiles under a run-script build-phase to
drive custom commands. Fix the generated makefiles for custom commands
with multiple outputs to list all the outputs on the left hand side of
the build rule. This is much simpler and more reliable than the old
multiple-output-pair infrastructure.
A common idiom in CMake-based build systems is to have custom commands
that generate files not listed explicitly as outputs so that these
files do not have to be newer than the inputs. The file modification
times of such "byproducts" are updated only when their content changes.
Then other build rules can depend on the byproducts explicitly so that
their dependents rebuild when the content of the original byproducts
really does change.
This "undeclared byproduct" approach is necessary for Makefile, VS, and
Xcode build tools because if a byproduct were listed as an output of a
rule then the rule would always rerun when the input is newer than the
byproduct but the byproduct may never be updated.
Ninja solves this problem by offering a 'restat' feature to check
whether an output was really modified after running a rule and tracking
the fact that it is up to date separately from its timestamp. However,
Ninja also stats all dependencies up front and will only restat files
that are listed as outputs of rules with the 'restat' option enabled.
Therefore an undeclared byproduct that does not exist at the start of
the build will be considered missing and the build will fail even if
other dependencies would cause the byproduct to be available before its
dependents build.
CMake works around this limitation by adding 'phony' build rules for
custom command dependencies in the build tree that do not have any
explicit specification of what produces them. This is not optimal
because it prevents Ninja from reporting an error when an input to a
rule really is missing. A better approach is to allow projects to
explicitly specify the byproducts of their custom commands so that no
phony rules are needed for them. In order to work with the non-Ninja
generators, the byproducts must be known separately from the outputs.
Add a new "BYPRODUCTS" option to the add_custom_command and
add_custom_target commands to specify byproducts explicitly. Teach the
Ninja generator to specify byproducts as outputs of the custom commands.
In the case of POST_BUILD, PRE_LINK, and PRE_BUILD events on targets
that link, the byproducts must be specified as outputs of the link rule
that runs the commands. Activate 'restat' for such rules so that Ninja
knows it needs to check the byproducts, but not for link rules that have
no byproducts.
Move handling of an empty toolset name into the implementation of the
method. This simplifies the VS 10 implementation of default toolset
selection because it has one code path that is always called.
Xcode requires a separate PBXFileReference for each target source group
that references a source file. Xcode 6 now diagnoses re-use of the same
PBXFileReference from multiple source groups. Add the referencing
target name to our internal map key so we use a per-target reference.
Xcode 6 introduced an 'OTHER_LIBTOOLFLAGS' setting for the "Other
Librarian Flags" of a static library. Now 'OTHER_LDFLAGS' are ignored.
Teach the Xcode generator to choose the correct name for the build
setting based on the type of target and the version of Xcode.
Inspired-by: Jamie Kirkpatrick <jkp@spotify.com>
Many of the 'head' arguments added by commit v2.8.11~289^2~1 (Make
linking APIs aware of 'head' target, 2013-01-04) turned out not to be
needed. The "link implementation" of a target never needs to be
computed with anything but itself as the 'head' target (except for
CMP0022 OLD behavior because then it is the link interface).
Remove the unused 'head' target paths. Add "internal" versions of
cmTarget::GetDirectLinkLibraries and GetLinkImplementationLibraries
to support the CMP0022 OLD behavior without otherwise exposing the
'head' target option of these methods.
In commit 84fdc992 (stringapi: Pass configuration names as strings,
2014-02-09) a few code paths for the Xcode 1.5 single-configuration
generator were not updated to use an empty configuration name instead of
a NULL pointer when no configuration is specified in CMAKE_BUILD_TYPE.
Fix them now.
Stephen Kelly
Brad King
Gregor Jasny
Sean James
Ben Boeckel