This reverts commit 242c3966 (add_custom_command: Diagnose
MAIN_DEPENDENCY limitation, 2015-03-09) and the follow up commit
b372a99a (UseSWIG: Do not use MAIN_DEPENDENCY on custom commands,
2015-03-26).
I misdiagnosed the underlying issue that prompted creation of policy CMP0057.
The actual issue surfaces when a single custom command's MAIN_DEPENDENCY
is listed in more than one target; this issue will have to be addressed
independently.
The documentation of this variable in the CTest module is outdated
and has been superseded by the ctest(1) manual. In particular, the
latter mentions that it works with the Ninja generator as well as
makefile generators. Remove the documentation from the CTest module
and replace it with a link to the main variable documentation (which
already references the ctest(1) manual).
Fix the logic added by commit v3.0.0-rc5~9^2
(InstallRequiredSystemLibraries: MBCS MFC is optional on VS 12,
2014-05-06). Do not test content of MSVC${v}_MFC_DIR until after the
variable is set.
Use file(GENERATE) to write the logging wrapper scripts to evaluate
generator expressions. Use a per-config script names in case the
content varies by configuration.
Use file(GENERATE) to write the initial cache file so that we can
evaluate generator expressions. Use a per-config initial cache file
name in case the content varies by configuration.
Preparation for per component variables.
Patch makes sure we know which variables
will be set for per component generator
and also prevents accidental overflows
of variable values between components.
During compilation of the intermediate link file, the output directory
may not be present in Visual Studio builds. This fix makes sure the
output directory exists before generating the output file.
Suggested-by: Irwin Zaid
66b641f4 Help: Add notes for topic 'add-GreenHills-MULTI-generator'
48004d9d Add a 'Green Hills MULTI' generator on Windows
051d8be1 cmLocalGenerator: Constify some cmTarget and cmGeneratorTarget arguments
Green Hills MULTI is an IDE for embedded real-time systems. The IDE's
product page can be found here:
http://www.ghs.com/products/MULTI_IDE.html
It supports cross compiling on ARM, Intel x86, and other architectures
with various operating systems. The IDE exists on Linux and Windows
host systems, but CMake will currently only generate the project files
on Windows host systems.
Refactoring of content list that removes
use of find and sed to make listing algorithm
more clear and remove external dependencies.
Patch also limits man pages handling to
locations listed in brp-compress rpm script
by default - fixes bug report #14660.
The UPPERCASE name was inconsistent with config-packages, the
find_dependency macro, and even FPHSA itself, which expects
components to be specified with names matching ExactCase.
The FOUND_VAR was only permitted to have two possible values, and
now both are set for compatibility. Document it as obsolete, and
adjust the code for the same. Users of the variable should just
remove it.
When SWIG_GET_EXTRA_OUTPUT_FILES checks to see if a source file exists
for use in reading the module name, it must pass an absolute path to
the if(EXISTS) command. Teach SWIG_ADD_SOURCE_TO_MODULE to give it
the absolute path it already knows.
I was previously appending to nvcc_flags inside the file loop. This
caused the flag to be appended multiple times which freaks out nvcc.
Now the flag is specifically handled per file.
A previously undocumented feature allowed overriding the format
specified to CUDA_WRAP_SRCS with a source file property called
CUDA_SOURCE_PROPERTY_FORMAT. I added documentation for this feature as
well as added the ability to let nvcc compile any file regardless of
type if this property was found.
In addition, I also fixed a couple of bugs with the calls to
_cuda_get_important_host_flags that weren't garding the arguments with
"" to prevent empty values from causing errors.
If the host flags contain a c++11 flag (at least for gcc), then we can't
automatically propagate to nvcc it using -Xcompiler. This is because
nvcc can't use any C++ only flags. Instead we find this flag and add it
to nvcc's flags (it has a special flag for dealing with c++11 code) and
remove it from the host flags.
Co-Author: Guillermo Marcus <gmarcus@nvidia.com>
VS 2013 originally claimed to support initializer lists but a bug was
found in which it generated bad code silently. For this reason we
previously considered support to not be present. However, Update 3 adds
a hard error on cases that previously generated bad code, so it is now
safe to use initializer lists with VS 2013 Update 3 or greater. At
worst a compiler error will be issued in the cases that do not work, but
that is no different from any other compiler-specific workaround a
project code may need.
Beginning in CUDA 5.5 a static version of the cuda runtime library
became available. Since nvcc defaults to using this library over the
shared version, FindCUDA will also default to using this version. There
are many advantages to using the static version (most importantly to
avoid conflicts with multiple versions when building a CUDA based
library). Offer a CUDA_USE_STATIC_CUDA_RUNTIME option to control
this behavior.
RPM packages can contain symbolic links to relative paths - including
support for multiple relocation paths through generation of post install
relocation scripts. Add basic support with limitations described in
documentation.
Add the dependency on the main swig input source file as a normal
DEPENDS option. We cannot use MAIN_DEPENDENCY because if there are
multiple target languages then multiple custom commands would want to
use the same MAIN_DEPENDENCY, but at most one custom command may specify
a given source file as its MAIN_DEPENDENCY. Exposed by a CMP0057
warning.
Extend the ``DATA{Dir/,...}`` syntax with a new ``RECURSE:`` option
to enable recursive matching of associated files. This will allow
an entire directory tree of data to be referenced at once.
Extend the _ExternalData_arg_find_files signature with an option to
specify the kind of file(GLOB) operation to be performed. Set
CMP0009 to NEW so that GLOB_RECURSE does not follow symlinks.
Teach the Xcode generator that ONLY_ACTIVE_ARCH=YES means to use ARCHS,
and that the default of ONLY_ACTIVE_ARCH=NO means to use NATIVE_ARCH and
ignore ARCHS. In the latter case there is no reason to generate ARCHS.
The `binary_dir` variable is never set, so this is invalid. Instead, use
"." which all the other build commands use anyways. Also only set the
--config option if it is meaningful.
The compiler documents that USE statements search for ".mod" files
in directories specified with -I, but not -isystem.
Reported-by: Hugh Sorby <h.sorby@auckland.ac.nz>
Replace an old hack of the form 'if("${VAR}" MATCHES "^${VAR}$")'
with the much simpler 'if(NOT DEFINED ${VAR})'. This was exposed
by a CMP0054 warning.
The Xcode 5 platform specific framework locations differ from the Xcode
6 ones. Look first for the Xcode 6 ones, then for iOS Xcode 5 ones and
last for the Xcode 5 OS X ones.
For reference, the XCTest.framework is located as follows:
Xcode511.app/Contents/Developer/Library/Frameworks/XCTest.framework
Xcode511.app/Contents/Developer/Platforms/iPhoneOS.platform/Developer/SDKs/iPhoneOS7.1.sdk/Developer/Library/Frameworks/XCTest.framework
Xcode511.app/Contents/Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhoneSimulator7.1.sdk/Developer/Library/Frameworks/XCTest.framework
Xcode601.app/Contents/Developer/Platforms/MacOSX.platform/Developer/Library/Frameworks/XCTest.framework
Xcode601.app/Contents/Developer/Platforms/iPhoneOS.platform/Developer/Library/Frameworks/XCTest.framework
Xcode601.app/Contents/Developer/Platforms/iPhoneSimulator.platform/Developer/Library/Frameworks/XCTest.framework
Signed-off-by: Gregor Jasny <gjasny@googlemail.com>
4178cd88 Help: Add notes for topic 'xcode-xctest'
87a4b858 Tests: Add XCTest example to test Frameworks and Cocoa App Bundles
ba14510b OS X: Add FindXCTest module
3714955b OS X: Add handling for XCTest bundles
54a5cdbb Tests: Compute Xcode version for any generator on OS X
Add a module to lookup XCTest Framework and xctest utility.
It also provides APIs for creating 'xctest' targets.
Signed-off-by: Gregor Jasny <gjasny@googlemail.com>
The PGI compilers on Linux do not have the -fPIE flag. Remove the table
entry added by commit v2.8.9~125^2~2 (Add platform variables for
position independent code flags, 2012-05-05), which likely included it
only as part of a sweeping introduction of such flags.
Since commit v2.8.11~63^2 (UseJava.cmake: require explicit request to
include jars, 2013-03-26) the argument parsing always overrides the
variable settings even if the corresponding arguments are not passed.
Re-order logic to fix this.
Fixes mantis bug report with id 15169. Some
component specific attributes were leaking
to next component. Leakage handling was
implemented in different locations but there
were still attributes that leaked. Patch
encapsulates generator into function so all
current leaks are fixed and no future leaks
can occur.
Implement a brand new FindMatlab module:
- Add support for versions and components.
- Find Matlab and its version in a more precise and multiplatform way.
- Add API to create a new mex extension with documentation.
- Add API to add matlab unit tests (with or without the unit test framework).
- Find as much as possible based on a single Matlab_ROOT_DIR cache entry
and allow the user to change it to re-find everything.
Protect against variables named "CSHARP", "PERL", "PYTHON", or "UNKNOWN"
when CMP0054 is not set to NEW.
Reported-by: Tuukka Pasanen <tuukka@iocaste.ilmi.fi>
Previously the module did not support projects using installation
components because install(PROGRAMS) was never called with COMPONENT.
Add an option to specify the COMPONENT so that projects doing this do
not have to resort to using CMAKE_INSTALL_SYSTEM_RUNTIME_LIBS_SKIP and
writing the install rule by hand.
In commit 3ec02547 (CPackRPM: Allow multiple path relocation prefixes
for one package, 2015-01-21) a regression was introduced that causes
parent directories of relocation paths to be incorrectly included in
the rpm. Fix this and make the test case more strict to cover it.
In Platform/Windows-MSVC the C and CXX flags are initialized to
contain preprocessor definitions describing the platform. On
WinCE platforms this may not be just -DWIN32. This information
may be important to RC sources too, so add such preprocessor
definitions to the default RC flags.
Suggested-by: Gunnar Roth <gunnar.roth@gmx.de>
The RC language is special in that it is automatically enabled
on Windows-based platforms when another primary language is
enabled. Move enablement of RC from early in the enablement
of the other language to late. This will allow it to use
information detected as part of enabling C, CXX, or Fortran.
3d612c73 MSVC: Compile with arch-specific flags on ARM platforms (#14552)
886dcaa7 MSVC: Distinguish among ARM architectures more precisely (#14552)
ea986676 MSVC: Define /DWINCE when building for WinCE platforms (#14552)
Allow URL templates to contain a %(algo:<key>) placeholder that is
replaced by mapping the canonical hash algorithm name through a map
defined by the <key>.
Extend the Module.ExternalData test to cover the behavior.
Extend the RunCMake.ExternalData test to cover error cases.
Refactor the Check*CompilerFlag modules to pass the flags to
Check*SourceCompiles using CMAKE_REQUIRED_FLAGS instead of
CMAKE_REQUIRED_DEFINITIONS. Both end up being used, but the variable
for "FLAGS" is more precise.
The change in commit v2.8.12~218^2 (CPackRPM protect '@' character in
filename processed in the spec file, 2013-07-05) was not necessary after
commit v2.8.12~439^2 (Add support for componentized USER spec file,
2013-04-01). The latter replaced ${VAR} references in the spec file
template string with \@VAR\@ references, thus protecting '@' symbols
automatically. This caused CPackRPM to break paths with @ symbols.
Revert the change to fix the behavior, and add a test case.
Otherwise find_library is unable to lookup the XCTest framework which
is not located in the SDK serach path:
In the 10.10 SDK the SDK frameworks are located here:
$DEVELOPER_DIR/Platforms/MacOSX.platform/Developer/SDKs/MacOSX10.10.sdk/System/Library/Frameworks
whereas the Platform SDKs are located here:
$DEVELOPER_DIR/Platforms/MacOSX.platform/Developer/Library/Frameworks
Signed-off-by: Gregor Jasny <gjasny@googlemail.com>
If a feature is added multiple times via ADD_FEATURE_INFO it should
appear only once in FEATURE_SUMMARY.
Signed-off-by: Gregor Jasny <gjasny@googlemail.com>
CPACK_RPM_<component>_PACKAGE_ARCHITECTURE variable allows
the same project to support packages of different architectures
including noarch, native and foreign architectures.
BuildArch must only be added to a spec file for a "noarch" package or
rpmbuild will fail. For all others, the --target argument sets the
package architecture. In the process of Fixing rpm architecture, we
make it mandatory, adding a default value of native architecture (the
same as if no --target argument is present). Update the documentation
at the top of the file to make it mandatory.
Clang Static Analyzer is so smart that it reports a defect when this
intended null-deref is encountered. Use sizeof instead which has no
runtime effects.
This check was first added by commit v3.0.0-rc5~6^2 (FindCurses: Detect
and satisfy ncurses dependency on tinfo, 2014-01-17), but it is not
correctly conditioned on existence of the tinfo library and fails if the
code path is taken but tinfo is not found. However, since commit
v3.2.0-rc1~369^2 (FindCurses: Drop search for deprecated HP-UX cur_colr
library, 2014-11-17) the result of the check is not used, so simply drop
it.
Since jsoncpp 0.7.0 (2014-11-20) the upstream may provide a CMake
package configuration file such that find_package(jsoncpp) will find a
jsoncppConfig.cmake file. In order to avoid conflicting with this
(especially on case-insensitive filesystems), and since we always prefer
projects to provide package config files (that they maintain), it is
better to not provide FindJsonCpp publicly.
Move FindJsonCpp into a private source directory that is not installed
so that we can still use it for building CMake itself.
Reported-by: Ryan Pavlik <ryan.pavlik@gmail.com>
4cf3589e Help: Add notes for topic 'compiler-version-Fortran'
f611406f Fortran: Test that CMAKE_Fortran_COMPILER_VERSION is set (#15372)
c6e1f464 Fortran: Detect G95 compiler version
0033faac Fortran: Detect PGI compiler version
302d47b1 Fortran: Detect XL and VisualAge compiler versions
8c8b77a5 Fortran: Detect GNU compiler version
49562a77 Fortran: Detect PathScale compiler version
aa77b631 Fortran: Detect SunPro compiler version
2e09c423 Fortran: Detect Intel compiler version
e6ebc814 Fortran: Add infrastructure to detect compiler version (#15372)
Fortran does not offer syntax to compose a string literal at
preprocessing time from numeric compuations. Instead encode each digit
of each component as a separate INFO string and compose them in CMake
code after extraction. Support MAJOR, MINOR, PATCH, and TWEAK
components with up to 8 digits each.
When matching implicit library names, use a sentinel "x" to avoid
ever expanding the library name as a variable. This was detected
by a CMP0054 warning.
The project has moved from <http://www.coin3d.org/> to
<https://bitbucket.org/Coin3D/coin/wiki/Home>. Simply drop the
out-dated link. Few find modules have links to the project sites.
Anyone looking to use a given find module likely already knows about the
project it finds and can use a search engine to find its homepage.
The file(GLOB_RECURSE) call added by commit 3ec02547 (CPackRPM: Allow
multiple path relocation prefixes for one package, 2015-01-21) should
not follow directory symlinks, so make sure CMP0009 is set to NEW.
1814cf74 Help: Add notes for topic 'add-CheckFortranCompilerFlag'
54e900ab CheckFortranCompilerFlag: Add test case
393a45e2 CheckFortranCompilerFlag: Add module to check Fortran flag existence
This bug caused c_function_prototypes to not be recorded at configure
time when compiling with -std=gnu99 or similar. In the case of feature
recording, that was not a problem, because the logic in
CMakeDetermineCompileFeatures.cmake currently assumes that a feature
present for an earlier standard is present for a later standard.
However, the detection strings are also used in WriteCompilerDetectionHeader,
so the feature macro has been defined to '0' when using a later language
dialect.
Fix that by not checking the existence of the __STDC_VERSION__ macro at
all when detecting C90 features.
If no compiler feature information is known for a given compiler
version, do not set a language standard default either. The two
settings must be recorded consistently.
When targeting Windows with a 64-bit architecture, use "$PROGRAMFILES64"
to get the Program Files folder. Use CMAKE_SIZEOF_VOID_P to check for
the architecture size instead of CMAKE_CL_64 because the latter is not
defined for all compilers.
Inspired-by: Hugh Sorby <h.sorby@auckland.ac.nz>
Inspired-by: İsmail Dönmez <ismail@donmez.ws>
809a5a5e Help: Add notes for topic 'CTestCoverageCollectGCOV-refinements'
03c0812c CTestCoverageCollectGCOV: Fix handling of international characters
8caa4e72 CTestCoverageCollectGCOV: Add test case
5c828cc8 CTestCoverageCollectGCOV: Allow custom flags to gcov
30cb628e CTestCoverageCollectGCOV: Fix handling of large file counts
Initialize CMAKE_SHARED_LINKER_FLAGS_RELWITHDEBINFO_INIT from the value
of CMAKE_EXE_LINKER_FLAGS_RELWITHDEBINFO_INIT rather than the one for
the DEBUG configuration. This typo has been present since the logic was
first added in commit 36db45082e (ENH: fix up several problems with new
stuff, 2002-11-11).
Reported-by: Gunnar Roth <gunnar.roth@gmx.de>
When loading the list of target support directories, read the file
with UTF-8 encoding since that is what CMake writes into the file.
This allows us to support international characters in the path to
the build tree containing the target support directories.
Add a GCOV_OPTIONS option to allow specification of custom flags. In
ctest_coverage gcov support, if you set CTEST_COVERAGE_EXTRA_FLAGS, they
get put on the command line before the -o. In this case we remove the
-b and replace it with GCOV_OPTIONS. All other arguments remain the
same.
The "cmakexbuild" wrapper is not needed for Xcode 4 and above, and the
path to it may change when CMake moves. Avoid storing a specific path
to a build program in CMakeCache.txt and instead compute the value for
CMAKE_MAKE_PROGRAM on demand. However, if a user does set the value
explicitly then honor it.
This does for Xcode what commit v3.0.0-rc1~260^2~4 (VS: Switch to
internal CMAKE_MAKE_PROGRAM lookup by generators, 2013-11-15) did for
Visual Studio generators.
This will make them use the 'console' pool with the Ninja generator.
Impacted targets are:
- Built-in targets: install, install/local, install/strip, tests,
package, package_source, rebuild_cache
- Targets provided by the CTestTargets module: Nightly, Continuous,
Experimental,
and all their variants (*Start, *Configure, ...)
Within an existing build tree, if the stamp for a step already exists
when one activates the ALWAYS option, we still want it to always build.
Remove the step stamp file during CMake configuration to ensure it does
not exist when the ALWAYS option is enabled.
f3e0b6f1 CTestCoverageCollectGCOV: Add module to run gcov
6dd980e0 ctest_submit: Make CDASH_UPLOAD mode arguments more strict
5dc33f89 ctest_submit: Add CDASH_UPLOAD mode to upload files to CDash
Provide a function to run gcov and create a tarball of results.
Since CDash tracks the md5sum of the files uploaded, use the
--mtime option with "cmake -E tar" so that tar files could be
created that would have the same md5sum with the same content.
965a50dc Features: Fix GNU 4.4 and 4.5 C standard level flags
7f4154a4 Features: Fix CompileFeatures non-feature tests for space in path
f40c19b5 Features: Fix CompileFeatures test for C non-features
Thomas Orozco
Brad King
Nils Gladitz
Felix Geyer
Orion Poplawski
Raffi Enficiaud
Bjoern Thiel
Andrey Pokrovskiy
Dan Kegel
Domen Vrankar
James Bigler
Geoff Viola
Stephen Kelly
Tuukka Pasanen
Daniele E. Domenichelli
Felix Schwitzer
Ben Boeckel
Gregor Jasny
Steven Vancoillie
Zack Galbreath
André Klitzing
Steven Vancoillie
Mark Studenka
Todd Gamblin
Roman Wüger
Raffi Enficiaud
Gaëtan Lehmann
Johan Andruejol
Роман Донченко
Mark Abraham
Gunnar Roth
Marcus Meissner
Joshua A Clayton
Peter Wu
Tiago Stürmer Daitx
Ruslan Baratov
Michael Smith
Nicolas Bock
Gunther Laure
Bill Hoffman
Robert Maynard
Guillaume Belz
Sylvain Joubert
Christoph Grüninger
Andrew Seidl