Define an empty string in CMAKE_<LANG>_STANDARD_DEFAULT to mean that
the toolchain has no notion of lanuage standard levels. In this case
the <LANG>_STANDARD[_REQUIRED] properties will have no effect.
Update the RunCMake.CompileFeatures test to exclude the
LinkImplementationFeatureCycle test when there is no standard default.
It can never fail because no use of specific features will adjust the
CXX_STANDARD level required for any target since the standard levels
have no meaning in this case.
65b81da4 cmVariableWatch: Use the cmDeleteAll algorithm with for_each.
30d2de9a cmGeneratorExpressionEvaluator: Replace own algorithm with cmDeleteAll.
4a6e795b Use the cmDeleteAll algorithm instead of trivial raw loops.
abb4a678 Add a generic algorithm for deleting items in a container.
55a73e6b Use the cmJoin algorithm where possible.
8dc8d756 cmStandardIncludes: Add a join algorithm for string containers.
b5813cee cmInstallCommand: Remove unused variable.
With PushScope and PopScope, keeping track of another bit of data for
each scope isn't easy. Instead, store it as another CMake variable so it
gets implicitly tracked along with everything else.
This works in a revert of commit
7d674b5f0b.
Provide options to fail without blocking or to block up to a timeout.
Provide options to specify the scope containing the lock so it can be
released automatically at the end of a function, file, or process.
Extend the RunCMake.file test with cases covering the file(LOCK) command
usage and error cases.
This reverts commit v3.1.0-rc1~557^2~2 (ClearMatches: Only clear matches
which were actually set, 2014-03-12). The optimization did not track
the match count in the same scope as the variables, allowing possible
inconsistency.
Resolve conflicts in Source/cmIfCommand.cxx, Source/cmMakefile.cxx,
and Source/cmMakefile.h by moving the changes to the new location
of the code involved.
It gets incremented while entering a loop block (e.g. foreach or while)
and gets decremented when leaving the block. Because scope borders for
example at function borders must be taken into account the counter is
put into a stack. With every new scope an empty counter is pushed on the
stack, when leaving the scope the original value is restored.
This will allow easy querying if the break command is properly nested
within a loop scope.
Signed-off-by: Gregor Jasny <gjasny@googlemail.com>
A common idiom in CMake-based build systems is to have custom commands
that generate files not listed explicitly as outputs so that these
files do not have to be newer than the inputs. The file modification
times of such "byproducts" are updated only when their content changes.
Then other build rules can depend on the byproducts explicitly so that
their dependents rebuild when the content of the original byproducts
really does change.
This "undeclared byproduct" approach is necessary for Makefile, VS, and
Xcode build tools because if a byproduct were listed as an output of a
rule then the rule would always rerun when the input is newer than the
byproduct but the byproduct may never be updated.
Ninja solves this problem by offering a 'restat' feature to check
whether an output was really modified after running a rule and tracking
the fact that it is up to date separately from its timestamp. However,
Ninja also stats all dependencies up front and will only restat files
that are listed as outputs of rules with the 'restat' option enabled.
Therefore an undeclared byproduct that does not exist at the start of
the build will be considered missing and the build will fail even if
other dependencies would cause the byproduct to be available before its
dependents build.
CMake works around this limitation by adding 'phony' build rules for
custom command dependencies in the build tree that do not have any
explicit specification of what produces them. This is not optimal
because it prevents Ninja from reporting an error when an input to a
rule really is missing. A better approach is to allow projects to
explicitly specify the byproducts of their custom commands so that no
phony rules are needed for them. In order to work with the non-Ninja
generators, the byproducts must be known separately from the outputs.
Add a new "BYPRODUCTS" option to the add_custom_command and
add_custom_target commands to specify byproducts explicitly. Teach the
Ninja generator to specify byproducts as outputs of the custom commands.
In the case of POST_BUILD, PRE_LINK, and PRE_BUILD events on targets
that link, the byproducts must be specified as outputs of the link rule
that runs the commands. Activate 'restat' for such rules so that Ninja
knows it needs to check the byproducts, but not for link rules that have
no byproducts.
Teach the add_custom_command and add_custom_target commands a new
USES_TERMINAL option. Use it to tell the generator to give the command
direct access to the terminal if possible.
d1b62185 Merge branch 'parent-scope-tests' into variable-pull-failure
5f414cef Revert "cmDefinitions: Don't store parent lookups"
e0c0b1ac test: add a test for PARENT_SCOPE with multiple scopes
064c415d test: add test for PARENT_SCOPE behavior
This reverts commit 5abfde6cb8.
The behaviors associated with implicit pulldown on variable lookup
seriously conflict with the optimizations made in these commits.
Basically, since values were copied upon variable lookup, not just on
PARENT_SCOPE, coupled with PARENT_SCOPE's behavior based on whether the
variable is in the current scope or not causes serious problems with not
storing a value for every variable at every scope.
The commit changed behavior of the following example, among other cases:
function(test_set)
set(blah "value2")
message("before PARENT_SCOPE blah=${blah}")
set(blah ${blah} PARENT_SCOPE)
message("after PARENT_SCOPE blah=${blah}")
endfunction()
set(blah value1)
test_set()
message("in parent scope, blah=${blah}")
Reported-by: Alex Merry <alex.merry@kde.org>
Reported-by: Ben Cooksley <bcooksley@kde.org>
858d5a0b Fix if() checks of CMAKE_SYSTEM_NAME on Cygwin
e177e7af FPHSA: Avoid if() dereferencing of quoted variable
425acc52 cmcurl: Use if(DEFINED) to simplify conditions
cede5cbd libarchive: Avoid depending on if() to dereference a quoted variable
2d97178b FindGTK2: Avoid depending on if() to dereference a quoted variable
0b12815d Modules/Test*.cmake: Use if(DEFINED) to simplify conditions
188a1f23 If: Introduce policy CMP0054 - don't dereference quoted variables in if()
b900c1cc If: Extract cmConditionEvaluator from if() implementation
Reject the option by default. It will be implemented on a per-generator
basis. Pass the setting into try_compile project generation. Add cache
entry CMAKE_GENERATOR_PLATFORM and associated variable documentation to
hold the value persistently.
Add a RunCMake.GeneratorPlatform test to cover basic use cases for the
option. Verify that CMAKE_GENERATOR_PLATFORM is empty by default, and
that it is rejected when the generator does not support a user setting.
No call sites pass NULL to the output argument, so take it by
reference to avoid the if(output) conditions. Propagate the
change through the TryCompile APIs that call it.
When CMP0053 is in WARN mode, variables get expanded twice, leaking the
fact that the string was expanded twice and changing behavior. Instead,
suppress variable watches when running the expansion to trigger the
CMP0053 warning.
The ALLOWED_UNKNOWN_VARIABLE_READ_ACCESS access type was switched on an
undocumented variable and its lookup caused an unnecessary performance
impact. Remove it.
Allow setting build properties based on the features available
for a target. The availability of features is determined at
generate-time by evaluating the link implementation.
Ensure that the <LANG>_STANDARD determined while evaluating
COMPILE_FEATURES in the link implementation is not lower than that
provided by the INTERFACE of the link implementation. This is
similar to handling of transitive properties such as
POSITION_INDEPENDENT_CODE.
Add properties and variables corresponding to CXX equivalents.
Add features for c_function_prototypes (C90), c_restrict (C99),
c_variadic_macros (C99) and c_static_assert (C11). This feature
set can be extended later.
Add a <PREFIX>_RESTRICT symbol define to WriteCompilerDetectionHeader
to conditionally represent the c_restrict feature.
Introduce a new implementation of ExpandVariablesInString and select
between the old and new implementations based on policy CMP0053.
Instead of cmCommandArgumentParserHelper, use a custom parser with our
own stack. This is much faster and works well for our simple grammar.
The new behavior of CMP0053 should expand @VAR@ syntax only in certain
contexts. All existing EVIS callers use "replaceAt == true" so
hard-code our call to the old implementation. Update the signature to
default to "replaceAt == false" and pass "replaceAt == true" explicitly
in the call sites for configure_file and string(CONFIGURE).
Testing the configure (no generate) step with ParaView shows ~20%
performance improvement.
In terms of complete configure/generate steps, further testing with
ParaView shows a 20% performance improvement over 2.8.12.2 with Unix
Makefiles and minimal with Ninja. Ninja is less because it generate step
is the expensive part (future work will address this) by a long shot and
these changes help the configure step for the most part.
3f517522 StoreMatches: Minor cleanups
ef62fbad ClearMatches: Store match variable names statically
f718b30a ClearMatches: Only clear matches which were actually set
ClearMatches was clearing many variables which were never set in the
first place. Instead, store how many matches were made last time and
only clear those. It is moved to the cmMakefile class since it is a
common utility used by multiple commands.
Users of the new target_compile_features command are expected to
check the existence of the CMAKE_CXX_COMPILE_FEATURES variable before
attempting to use it to require features.
Expect cxx_variadic_templates to implement N2555.
N2555 is essentially a bugfix and predates most compiler releases which
aimed to experimentally support variadic templates.
Record the availability of this feature for GNU 4.8 on (UNIX AND
NOT APPLE) only. In the future, availability can be recorded for
earlier GNU, for other platforms and for other compilers. Initially
the affected configurations are as restricted as possible to allow
for easy testing while extending the features vector in only one
dimension.
The error message when using the set_property API directly is not
very good, but follow up commits will provide origin debugging of
the property and a target_compile_features command which will
provide a configure-time backtrace when possible.
Use the contents of it to upgrade the CXX_STANDARD target property,
if appropriate. This will have the effect of adding the -std=c++11
compile flag or other language specification on GNU when that is
needed for the feature.
5de63265 Genex: Only evaluate TARGET_OBJECTS to determine target sources.
aa0a3562 cmGeneratorTarget: Compute target objects on demand
042c1c83 cmTarget: Compute languages from object libraries on demand.
fdcefe3c cmGeneratorTarget: Compute consumed object libraries on demand.
c355d108 cmComputeTargetDepends: Track object library depends.
e5da9e51 cmTarget: Allow any generator expression in SOURCES property.
5702e106 cmTarget: Include TARGET_OBJECTS genex in target SOURCES property.
857d30b5 cmGlobalGenerator: Add interface to call ForceLinkerLanguages
28e1d2f8 cmStringCommand: Add GENEX_STRIP subcommand.
bf98cc25 Genex: Evaluate TARGET_OBJECTS as a normal expression.
8cd113ad cmTarget: Store strings instead of cmSourceFile* to represent SOURCES.
4959f341 cmSourceFileLocation: Collapse full path for directory comparisons.
fcc92878 cmSourceFileLocation: Remove unused Update method.
59e8740a cmTarget: Remove AddSourceFile method
26d494ba cmTarget: Use string API to add sources to cmTarget objects.
d38423ec cmTarget: Add a method to obtain list of filenames for sources.
...
This method was added in a commit based on a release branch that
pre-dated the std::string API changes. Port the implementation to use
the string APIs instead of c_str().
These policies are triggered by the use of a particular compiler rather
than outdated CMake code in a project. Avoid warning in every project
that enables a language by not displaying the policy warning by default.
Add variable CMAKE_POLICY_WARNING_CMP<NNNN> to control the warning
explicitly; otherwise enable the warning with --debug-output or --trace.
This breaks with strict policy convention because it does not provide
developers with any warning about the behavior change by default.
Existing projects will continue to build without a warning or change in
behavior. When a developer changes the minimum required version of
CMake in a project to a sufficiently high value (3.0), the project will
suddenly get the new compiler id and may break, but at least the
breakage comes with a change to the project rather than the version of
CMake used to build it.
Breaking strict policy convention is worthwhile in this case because
very few projects will be affected by the behavior change but every
project would have to see the warning if it were enabled by default.
Use the clang RemoveCStrCalls tool to automatically migrate the
code. This was only run on linux, so does not have any positive or
negative effect on other platforms.
Casts from std::string -> cmStdString were high on the list of things
taking up time. Avoid such implicit casts across function calls by just
using std::string everywhere.
The comment that the symbol name is too long is no longer relevant since
modern debuggers alias the templates anyways and the size is a
non-issue since the underlying methods are generated since it's
inherited.
When running CMake from the build tree the CMAKE_ROOT is the
entire source tree. Fix the CMP0017 check to be specific to
the Modules/ directory under CMAKE_ROOT so that Tests/ does
not count. Fix the FindPackageTest modules to include FPHSA
by full path from CMAKE_ROOT so that they do not include the
local FPHSA which reports an error meant to test that CMP0017
works.
Define a new 'CMAKE_CONFIGURE_DEPENDS' directory property that projects
can use to specify input files to the CMake configuration process.
Extend the RunCMake.Configure test to verify that the build system
re-runs CMake when this input changes.
Most callers already have a std::string, on which they called c_str() to pass it
into these methods, which internally converted it back to std::string. Pass a
std::string directly to these methods now, avoiding all these conversions.
Those methods that only pass in a const char* will get the conversion to
std::string now only once.
The include_directories() and add_compile_options() commands
should not append to the corresponding target property for IMPORTED
targets. This is already the case for add_definitions().
As an INTERFACE_LIBRARY has no direct link dependencies, we can
short-circuit in cmGeneratorExpressionEvaluator and
in cmGlobalGenerator::CheckLocalGenerators.
As they do not generate any output directly, any generate- or install-
related code acn also be short-circuited. Many of the local generators
already do this.
Because only INTERFACE related properties make sense on INTERFACE_LIBRARY
targets, avoid setting other properties, for example via defaults.
Rename cmSystemTools::FindExecutableDirectory to FindCMakeResources.
Teach it to compute the locations of cmake, ctest, cpack, ccmake, and
cmake-gui executables, and the location of CMAKE_ROOT. Provide this
information from static cmSystemTools::Get<resource>() methods.
Refactor code that needs these locations to use the new APIs.
Teach FindCMakeResources to use the OS X system API to lookup the
executable location. When running from the CMake build tree itself,
leave a file in the tree that FindCMakeResources can use to read the
location of the source tree. This avoids the need to compile the source
tree location into a binary that may be installed and used without the
source tree.
Teach the QtDialog on OS X to create a "cmake-gui" symlink in the build
tree next to "cmake" and the other tools, as is already done in the
install tree for the application bundle. This ensures a consistent set
of executables are available in one directory.
9c87d9c Add automatic rcc invocation for Qt.
84218e1 Add automatic uic invocation for Qt.
94a0ca6 Record which files are skipped by automoc.
18fb758 Run the main executable created in the autogen tests.
e485ba1 Rename the QtAutomoc tests to QtAutogen.
7ce65c3 Add extra checks for the AUTOMOC target property.
32771fc Update output messages for generic use.
f371ab5 Rename RunAutomoc to RunAutogen.
85b3d6e Extract an SetupAutoMocTarget method.
ca124a1 Rename the AutomocInfo.cmake file to be more generic.
a342c9f Move some makefile definitions up away from moc-specific code.
98632ef Add the AUTOGEN_TARGETS_FOLDER and obsolete AUTOMOC_TARGETS_FOLDER.
63378ba Rename some variables to reflect broader scope.
97f1aa3 Rename method to reflect generic use.
4abb111 Rename local variable to reflect generic use.
03878c9 Move variable set to where it is used.
...
The source files are already processed by cmQtAutomoc to look for
moc includes, so extend that to also look for ui_ includes and
find corresponding .ui files to process.
This replaces the need to invoke qt4_wrap_ui().
As the ui files are not likely to be part of the SOURCES of the
target, store the options associated with them separately in the
cmMakefile for querying during the autogen run.
Drop all behavior activated by setting CMAKE_BACKWARDS_COMPATIBILITY to
a value lower than 2.4, and generate an error when projects or the user
attempt to do so. In the error suggest using a CMake 2.8.x release.
Teach cmake_minimum_required to warn about projects that do not require
at least CMake 2.4. They are not supported by CMake >= 3.0.
Replace the documentation of CMAKE_BACKWARDS_COMPATIBILITY with a
reference to policy CMP0001.
Teach the CMake language parser to recognize Lua-style "long bracket"
arguments. These start with two '[' separated by zero or more '='
characters e.g. "[[" or "[=[" or "[==[". They end with two ']'
separated by the same number of '=' as the opening bracket. There is no
nesting of brackets of the same level (number of '='). No escapes,
variable expansion, or other processing is performed on the content
between such brackets so they always represent exactly one argument.
Also teach CMake to parse and ignore "long comment" syntax. A long
comment starts with "#" immediately followed by an opening long bracket.
It ends at the matching close long bracket.
Teach the RunCMake.Syntax test to cover long bracket and long comment
cases.
Drop all DefineProperty calls for non-chained properties. Drop the
documentation from the chained ones. The documentation for all
properties is now in Help/prop_*/*.rst files.
With our modern development workflow it is less likely a property will
be added to C++ code without documentation. This mode only existed to
support the DocTest which had very limited coverage of the properties
anyway.
This target type only contains INTERFACE_* properties, so it can be
used as a structural node. The target-specific commands enforce
that they may only be used with the INTERFACE keyword when used
with INTERFACE_LIBRARY targets. The old-style target properties
matching LINK_INTERFACE_LIBRARIES_<CONFIG> are always ignored for
this target type.
The name of the INTERFACE_LIBRARY must match a validity generator
expression. The validity is similar to that of an ALIAS target,
but with the additional restriction that it may not contain
double colons. Double colons will carry the meaning of IMPORTED
or ALIAS targets in CMake 2.8.13.
An ALIAS target may be created for an INTERFACE library.
At this point it can not be exported and does not appear in the
buildsystem and project files are not created for them. That may
be added as a feature in a later commit.
The generators need some changes to handle the INTERFACE_LIBRARY
targets returned by cmComputeLinkInterface::GetItems. The Ninja
generator does not use that API, so it doesn't require changes
related to that.
In buggy code like
add_custom_command(
OUTPUT ${CMAKE_CURRENT_BINARY_DIR}/out.h
MAIN_DEPENDENCY ${CMAKE_CURRENT_SOURCE_DIR}/out.h.in
...)
add_custom_command(
OUTPUT ${CMAKE_CURRENT_BINARY_DIR}/out.h
...)
that has more than one rule to generate the same output CMake has always
used the first rule. However, since commit 2268c41a (Optimize custom
command full-path dependency lookup, 2013-08-06) we update the map from
output to cmSourceFile for every rule generating an output, effectively
keeping the last command instead of the first.
Fix this regression by checking for each map update if the output
already has an entry. If so, keep only the original entry. The VS 8
generator triggers this with a special case for generate.stamp rules
that differ between ZERO_CHECK and normal targets, so do not warn for
now. Leave a TODO comment for warning in the future.
Since commit ad502502 (cmMakefile: Track configured files so we can
regenerate them, 2013-06-18) cmMakefile::ConfigureFile records the
configured file as an output file generated by CMake. The intention is
that for make and ninja we can re-run CMake when one of the files it
generates goes missing. However, files configured temporarily in
CMakeTmp directories by Check* modules do not live past the CMake
invocation.
We have to also track input files to the configure command. In theory
the input to a configure command could it self be a file that is going
to be deleted later (output from a custom command or configure_file).
Since commit ad502502 (cmMakefile: Track configured files so we can
regenerate them, 2013-06-18) cmMakefile::ConfigureFile records the
configured file as an output file generated by CMake. The intention is
that for make and ninja we can re-run CMake when one of the files it
generates goes missing. However, files configured temporarily in
CMakeTmp directories by Check* modules do not live past the CMake
invocation.
Teach cmMakefile::FinalPass to stop tracking files that don't
exist after we are finished generation.
b93982f Merge branch 'dev/fix-variable-watch-crash' into cmake-syntax
c50f7ed cmListFileLexer: Modify flex output to avoid Borland warning
bf73264 Warn about unquoted arguments that look like long brackets
58e5241 Warn about arguments not separated by whitespace
e75b69f cmListFileCache: Convert CMake language parser to class
e945949 Add RunCMake.Syntax test cases for command invocation styles
0546484 cmListFileArgument: Generalize 'Quoted' bool to 'Delimeter' enum
28685ad cmListFileLexer: Split normal and legacy unquoted arguments
1eafa3e cmListFileLexer: Fix line number after backslash in string
f3155cd Add RunCMake.Syntax test to cover argument parsing
Replace the boolean value that indicates whether an argument is unquoted
or quoted with a generalized enumeration of possible argument types.
For now "Quoted" and "Unquoted" remain the only types.
In the common case of custom command dependencies specified via full
path optimize the implementation of GetSourceFileWithOutput using a
(hash) map. This is significantly faster than the existing linear
search. In the non-full-path case fall back to the existing linear
suffix search.
* The ALIAS name must match a validity regex.
* Executables and libraries may be aliased.
* An ALIAS acts immutable. It can not be used as the lhs
of target_link_libraries or other commands.
* An ALIAS can be used with add_custom_command, add_custom_target,
and add_test in the same way regular targets can.
* The target of an ALIAS can be retrieved with the ALIASED_TARGET
target property.
* An ALIAS does not appear in the generated buildsystem. It
is kept separate from cmMakefile::Targets for that reason.
* A target may have multiple aliases.
* An ALIAS target may not itself have an alias.
* An IMPORTED target may not have an alias.
* An ALIAS may not be exported or imported.
Stephen Kelly
Brad King
Ben Boeckel
Ruslan Baratov
Gregor Jasny
Peter Collingbourne
Nils Gladitz
Clinton Stimpson
Rolf Eike Beer
Robert Maynard
Nicolas Despres