In the `try_compile` source file signature we propagate the caller's
value of `CMAKE_<LANG>_FLAGS` into the test project. Extend this to
propagate `CMAKE_<LANG>_FLAGS_<CONFIG>` too instead of always using the
default value in the test project. This will be useful, for example, to
allow the MSVC runtime library to be changed (e.g. `-MDd` => `-MTd`).
The Custom-Symbolic-and-Byproduct case fails strangely on some
filesystems used by our nightly testing. Somehow on the first build the
`use-byproduct` output ends up with a timestamp older than
`gen-byproduct-stamp` even though the build log clearly shows them build
in the correct order (and must according to build system dependencies).
Work around this problem by adding an extra delay before building
`use-byproduct`.
Tested-by: Gerhard Grimm <gerhard.grimm@detec.com>
Teach CTestCoverageCollectGCOV to honor the
CTEST_EXTRA_COVERAGE_GLOB variable. When this variable is set,
this module will glob for matching source files that were not
covered and include them in the resulting tar file.
The change in commit v3.5.0-rc1~198^2 (Ninja: Always re-run custom
commands that have symbolic dependencies, 2015-11-19) broke the
byproducts feature added by commit v3.2.0-rc1~340^2~2 (Add an option for
explicit BYPRODUCTS of custom commands, 2014-11-13) when SYMBOLIC
outputs also appear. This case occurs with AUTORCC-generated custom
targets because the output is SYMBOLIC (to always run) and the generated
file is a byproduct (for restat so dependents do not run unnecessarily).
The two use cases conflict because Ninja does not support per-output
restat. Favor restat whenever byproducts are present because it is
required for byproducts to work correctly. In use cases where we want
an always-run chain we simply will not be able to also use byproducts.
Refactoring in commit v3.5.0-rc1~272^2~11 (cmTarget: Implement ALIAS in
terms of name mapping, 2015-10-25) accidentally introduced logic that
assumes ALIAS targets always reference targets in their own directory.
Fix this and add a test case.
The configure-step fix is that `cmMakefile::FindTarget` should not consider
aliases. The purpose of this method is just to look up targets local to
a directory. Since ALIAS and normal targets share a namespace we know a
locally defined target will never collide with an ALIAS target anyway.
The method has 3 call sites, and this change is safe for all of them:
* `cmInstallCommand::HandleTargetsMode`: Rejects aliases before the call.
* `cmFLTKWrapUICommand::FinalPass`: Should never have considered aliases.
* `cmMakefile::FindTargetToUse`: Falls back to a global lookup anyway.
The generate-step fix is that `cmLocalGenerator::FindGeneratorTarget`
should not consider aliases. This method is the generate-step
equivalent to the above. The method has 2 call sites, and this change
is safe for both of them:
* `cmInstallTargetGenerator::Compute`: Never uses an alias target name.
* `cmLocalGenerator::FindGeneratorTargetToUse`: Falls back to global lookup.
Reported-by: Matteo Settenvini <matteo@member.fsf.org>
Symbolic links that point to external
location no longer cause cmake to fail
with string out of bounds error but
are instead packaged as non relocatable
symlinks and print out a warning message.
This commit fixes the following warning originally introduced in
1325260 (Add macros cmake_push/pop_check_state() as discussed on the list.)
Argument not separated from preceding token by whitespace.
RPM supports setting of default user, group,
file and directory permissions that will be
applied for files in package unless specified
per file/dir with attr setting
This is related to bug report 14714
FindGTK2 adds compile features to GTK2::sigc++ so that clients will
compile as C++11 or above. However, our test case covers using just the
library list variables instead of the imported targets. Fix this case
by propagating the compile features manually.
b06e17da Help: Add notes for topic 'cmake-depend-in-project-only'
52540245 Tests: Add test for CMAKE_DEPENDS_IN_PROJECT_ONLY variable
b1e1aa1e Makefile: Optionally scan only source and build trees for dependencies
ad140c6e VS: Put ALL_BUILD in the PREDEFINED_TARGETS_FOLDER
f069be05 VS: Fix default target support for targets nested inside a folder
c05ea485 VS: Improve unit test macros
78ec0461 VS: Add option to choose the `.sln` startup project (#15578)
Add a `VS_STARTUP_PROJECT` directory property to specify the project
that should be placed first in the `.sln` file so that it will be
selected as the default startup project.
Co-Author: Taylor Braun-Jones <taylor.braunjones@avigilon.com>
The fix in commit v3.5.0-rc1~27^2 (FindPkgConfig: set standard variables
in the cache, 2016-01-20) added the wrong variable name to the cache.
The test was only testing that the cache variable existed, not that it
also had the correct value. Update the test to ensure that the cache
value matches the local variable value.
Reported-by: Bernd Lörwald
c089485d Utilities/Release: Skip spurious Qt5Autogen test for nightly binary
e903a9fc Utilities/Release: Create a Windows 64-bit binary
dd630075 Utilities/Release: Rename scripts to match target platform
6a6e5d89 GenerateExportHeader: Allow common NO_DEPRECATED_MACRO_NAME for multiple libs
be5a8973 GenerateExportHeader: Do not define DEFINE_NO_DEPRECATED (#16022)
Previously we allowed this definition to persist outside our header.
This would cause conflicts across multiple such headers because the name
was always the same. Fix this by avoiding the definition altogether.
Compile with `-D_WIN32_WINNT=0x502` to use a WinXP-compatible API.
Compile with `-D_USING_V110_SDK71_` to tell the VS standard library
headers that we are building with a WinXP-compatible Windows SDK. Link
executables with `-subsystem:console,5.02` to make them runnable on
Windows XP 64-bit. Ideally `cmake-gui` should instead be linked with
`-subsystem:windows,5.02` but with the Ninja and Makefile generators
CMake adds `-subsystem:windows` after our `-subsystem:console,5.02` flag
and the linker seems to interpret this combination as we need.
If list of valid target architectures is empty for given SDK then there will
be no VALID_ARCHS build setting returned by Xcode. Return "" (empty string)
explicitly in this case. This may happens if CMAKE_IOS_INSTALL_COMBINED is ON
but only one architecture used in target.
491b41dd Help: Add notes for topic 'vs-clang-cl'
ad6d27ac Tests: do not build PrecompiledHeader on Clang/C2
a0f0541f Tests: fix PDBDirectoryAndName on Clang/C2
3541af67 Tests: fix Plugin building on Clang/C2
1902c293 Tests: fix complexOneConfig building on Clang/C2
cab2ec11 Tests: fix Complex building on Clang/C2
ada3736c Tests: fix Module.GenerateExportHeader building on Clang/C2
123b7e13 Tests: fix AliasTarget building on Clang/C2
445d4d4b VS 14: Add flag map for -std= to CppLanguageStandard tag in project files
0a785eb4 Features: Clang has no cxx_decltype_incomplete_return_type in MSVC sim mode
2c2ec488 VS: in Clang/C2 toolset, setup correct compiler settings
37afe00f CMakeDetermineCompilerId: Add detection of clang.exe bundled with VS
Calling `project()` or `enable_language()` from a toolchain file will
infinitely recurse since those commands load the toolchain file.
Diagnose and reject this case with an error message instead of crashing
when the stack eventually overflows.
Use recommended case for variable names. i.e. matching name of the
module as passed to `find_package`.
For backwards compatibility, the upper case versions of both input and
output variables are used and defined when appropriate. Skip this for
the _FOUND variable because FPHSA already does it. Skip this for the
_VERSION variable because that was recently added and never available
with the old name in a release of CMake.
Also detect the library version number. Provide results as variables
and as an imported target, LTTng::UST.
Signed-off-by: Philippe Proulx <eeppeliteloop@gmail.com>
Although we fail with an error on a hash mismatch, it is not a fatal
error so the script may continue processing. If the download itself had
no error then report in the STATUS variable that the operation was not
successful due to the hash mismatch.
Suggested-by: Tobias Hieta <tobias@hieta.se>
Add regression tests for the arguments handling in
cmake_parse_arguments. The tests were run also against cmake 3.4.1
maint branch to verify that there are no regressions.
Signed-off-by: Dimitar Yordanov <dimitar.yordanov@sap.com>
Signed-off-by: Matthias Maennich <matthias.maennich@sap.com>
Create a `CMAKE_TRY_COMPILE_TARGET_TYPE` option to specify use
of `add_library(... STATIC ...)` for the generated test project.
This will be useful for cross-compiling toolchains that cannot
link a binary without custom flags or scripts.
We use the host OS X version as the deployment target for this test.
This breaks if the SDKROOT environment variable specifies an
incompatible SDK version. Explicitly specify `macosx` as the
SDK so that CMake will automatically select a version matching
the deployment target.
This reverts commit 9beb2744d7.
Our AUTOMOC documentation states that it should be possible to
`#include "moc_foo.cpp"` in `foo.cpp`, and this will not work if
the file is placed in a different directory. Another solution
will need to be found to the original problem.
Reported-by: Stephen Kelly <steveire@gmail.com>
The new `%s` format specifier is substituted by file()/string()
`TIMESTAMP` sub-commands with the number of seconds since unix-epoch
(1970-01-01 00:00:00 UTC).
Co-Author: Nils Gladitz <nilsgladitz@gmail.com>
In commit v3.5.0-rc1~43^2 (Fix export of STATIC library PRIVATE
dependencies with CMP0022 NEW, 2016-01-15) we taught
target_link_libraries to generate `$<LINK_ONLY:$<TARGET_NAME:dep>>` in
INTERFACE_LINK_LIBRARIES instead of `$<LINK_ONLY:dep>` so that `dep` can
be recognized as a target name and updated during export. However, this
approach does not work when `dep` is just a plain library name and not a
target because `$<TARGET_NAME:...>` requires the name of a reachable
target.
Since we do not know during target_link_libraries whether the name will
correspond to a reachable target or not, we cannot inject the
`$<TARGET_NAME:...>` expression. Revert this change and solve the
original problem instead by teaching the export logic to recognize and
update target names directly in `$<LINK_ONLY:...>` expressions.
Reported-by: Ben Boeckel <ben.boeckel@kitware.com>
Check found libraries version to match user required version.
Protobuf compiler executable version is checked to be aligned with found
libraries, raising a warning message otherwise.
CPACK_* variables expect component name in upper case.
CPACK_RPM_* variables expected component name to be
in same case as component name.
This patch adds support for CPACK_RPM_* variables with
upper case component names to match the convention with
CPACK_* variables and also preserves same case component
names for back compatibility.
There's no need to stringify the values, but instead just pass in
strings. The core problem is that the path may have tokens which are
replaced by the preprocessor which causes an invalid path to be used.
The re-implementation in commit v3.5.0-rc1~116^2~1 (CMakeParseArguments:
replace by native cmake_parse_arguments command, 2015-12-05) introduced
a regression when parsing the ARGN arguments with cmake_parse_arguments.
The original implementation used
foreach(currentArg ${ARGN})
to iterate over input arguments. This flattened ;-lists within the
arguments whether they were quoted or not. Fix our new implementation
to preserve this behavior and add a test case to cover it.
Signed-off-by: Dimitar Yordanov <dimitar.yordanov@sap.com>
Signed-off-by: Matthias Maennich <matthias.maennich@sap.com>
a1ad098d Tests: Avoid OS X 10.5 limitation warning in RunCMake.install test
47460f3e install(EXPORT): Fix crash on target in another directory
e86383e1 Tests: Use newer policy settings in RunCMake.install test
The EXPORT-OldIFace test case uses install(TARGETS) and so generates a
warning:
CMake Warning in CMakeLists.txt:
WARNING: Target "foo" has runtime paths which cannot be changed during
install. To change runtime paths, OS X version 10.6 or newer is required.
Therefore, runtime paths will not be changed when installing.
CMAKE_BUILD_WITH_INSTALL_RPATH may be used to work around this limitation.
Set CMAKE_BUILD_WITH_INSTALL_RPATH to avoid the warning since we do not
need to run the binaries from the build tree anyway.
Previously we did not clearly document that `--target` is only supported
to be specified once. Even worse, specifying it multiple times would
silently ignore any previously specified targets and only build the last
target.
Update the documentation to specify this. Update the implementation to
reject multiple `--target` options to prevent user errors.
Updates to Tests/Fortran by commit v3.2.0-rc1~501^2 (Avoid if() quoted
auto-dereference, 2014-10-14) changed our check
"${CMAKE_Fortran_COMPILER_ID}" MATCHES "${CMAKE_C_COMPILER_ID}"
to
CMAKE_Fortran_COMPILER_ID MATCHES CMAKE_C_COMPILER_ID
because CMP0054 warned about the LHS compiler id "MSVC" being expanded.
However, the RHS of if(MATCHES) does not auto-dereference so this check
has returned FALSE since then and the FortranCInterface part of the test
has not been running!
Fix this by using STREQUAL with quoted arguments and setting CMP0054 to
NEW (by requiring 3.1).
Refactoring merged by commit v3.5.0-rc1~299 (Merge topic
'use-generator-target', 2015-10-20) in and around
commit v3.5.0-rc1~299^2~13 (cmExportSet: Store a cmGeneratorTarget,
2015-10-17) changed export sets to delay looking up actual targets and
stores only their names. However, in InstallCommand::HandleExportMode
we need to lookup targets immediately to check them for
EXPORT_LINK_INTERFACE_LIBRARIES. The check was accidentally made local
to the current directory, so if an export set contains a target from
another directory the lookup fails and CMake crashes. Fix the check to
look up the target name globally, and tolerate when no target is found
just in case.
Reported-by: Kelly Thompson <kgt@lanl.gov>
Refactoring in commit v3.5.0-rc1~347^2~2 (Set the current dirs on the
snapshot before creating the cmMakefile) accidentally changed the
source and binary directories configured in `cmake -E cmake_depends`
for use during dependency scanning. This can cause the wrong directory
information to be loaded. It also breaks Fortran module dependency
scanning for modules provided by targets in subdirectories that do
not have Fortran_MODULE_DIRECTORY set.
Fix the dependency scanning directory configuration and add a test to
cover the Fortran module case in which the breakage was observed.
Reported-by: Kelly Thompson <kgt@lanl.gov>
While evaluating `if(MATCHES)` we get a `const char*` pointer to the
string to be matched. On code like
if(CMAKE_MATCH_COUNT MATCHES "Y")
the string to be matched may be owned by our own result variables.
We must move the value to our own buffer before clearing them.
Otherwise we risk reading freed storage.
The add_custom_command(TARGET) signature only works for targets defined
in the current directory. Clarify this in the error message when the
target exists but was defined elsewhere.
Inspired-by: Bartosz Kosiorek <gang65@poczta.onet.pl>
Imported targets are now the recommended way of dealing with external
library dependencies. Add one for FindPNG and update documentation
accordingly. Also add a test case activated by CMake_TEST_FindPNG.
CMake 3.4 may crash on this case. The problem seems to have been
fixed since then, but keep it working by adding a test case now.
Reported-by: Gonzalo Garramuño <ggarra13@gmail.com>
Since this command was introduced in 2002 it has incorrectly constructed
the child process command line by concatenating arguments separated by
spaces with no quoting. Fix this by passing the command argument vector
directly to RunSingleCommand without an intermediate quoting and
re-parsing step.
Reported-by: Andrey Pokrovskiy <wonder.mice@gmail.com>
The target_link_libraries command records the PRIVATE dependencies of a
STATIC library in INTERFACE_LINK_LIBRARIES as "$<LINK_ONLY:dep>". This
hides the target name from export namespacing logic inside a generator
expression. When user-written generator expressions reference a target
name they must put it inside a "$<TARGET_NAME:dep>" expression to allow
the export logic to rename the target. In the case that the private
dependency is not already a generator expression, target_link_libraries
must use "$<LINK_ONLY:$<TARGET_NAME:dep>>" to allow the export logic to
rename the target.
Reported-by: Tamás Kenéz <tamas.kenez@gmail.com>
Expand the -W set of cmake options to include support for the -Werror
and -Wno-error format, which is used to control upgrading and
downgrading warning and error messages. Implement support for these new
formats for the dev and deprecated message types.
Add tests and updated documentation for new options.
fae47798 Utilities/Release: Configure Windows binary to support Windows XP
083312a8 Utilities/Release: Switch to .msi builder for Windows binary
240b065f Utilities/Release: Optionally load environment on remote build server
a95b4715 Utilities/Release: Add optional remote launcher to ssh calls
d8bc26a0 Xcode: Parse variant and genex for CMAKE_XCODE_ATTRIBUTE (#14947)
dc0ddb9e Xcode: Store configuration name along with XcodeObject (#14947)
28f98cee Xcode: Make CMAKE_XCODE_ATTRIBUTE calculation last step (#14947)
28db2268 Xcode: Factor out XCODE_ATTRIBUTE_ variant filter (#14947)
Before this change backslashes in strings were escaped during compile
flags adds via AppendFlag(). But global flags like OTHER_CPLUSPLUSFLAGS
are not added as flags but as plain strings so they were not escaped
properly.
Now the escaping is performed within cmXCodeObject::PrintString() which
ensures that strings are always encoded.
The behaviour of double specified keywords is rather undefined or at
least not clearly documented. This change introduces a strict check and
emits a warning in case a keyword has been specified more than once.
Implement a native `cmake_parse_arguments` command that is fully
compatible with the documented behaviour of the previous implementation.
Leave the CMakeParseArguments module empty but existing for
compatibility.
This patch solves the problem of installing both: Device and Simulator
libraries on iOS. Before only one of them was installed.
If the IOS_INSTALL_COMBINED property is set on a target, a
special install hook will be activated which builds the corresponding
target and combines both at the install location.
The original patch was contributed by Ruslan Baratov, and polished by
Gregor Jasny.
Avoid constructing full paths to .git repositories in the test. Use
relative paths and let Git convert them to absolute paths internally.
This is simpler and also avoids trouble with various absolute path root
component conventions on Windows (`c:/`, `/c/`, `/cygdrive/c/`).
- Add TIFF::TIFF imported target
- Document imported target
- Add testcase to test the standard variables and the imported
target
Also:
- Add TIFF_INCLUDE_DIRS to match common practice
- Update documentation generally, including documenting
TIFF_INCLUDE_DIRS
If multiple input files are provided then the destination must be a
directory. If only one input file is provided then destination may be
either a file or directory.
7a327727 Embarcadero: Fix erroneous interpretation of __CODEGEARC_VERSION__.
25211d75 Compiler ID: Compiler versions must be a valid, numeric version string.
060442c2 Embarcadero: Check code using CMAKE_CXX_COMPILER_ID and CMAKE_C_COMPILER_ID.
f3b3219c Embarcadero/Watcom: Properly skip VSResource test for other generators.
ddbda722 Embarcadero: Fix bug where duplicate Ninja job pools would be created.
The CMAKE_CXX_COMPILER_ID and CMAKE_C_COMPILER_ID variables are set to
"Borland" for older versions of the compiler. Newer CodeGear/Embarcadero
compilers will have those variables set to "Embarcadero". Search for lines of
code referencing both the variable name and Borland to be sure that they also
refer to Embarcadero.
A typical iOS application bundle (also Framework Bundle) contains the
application executable and any resources used by the application (for
instance, the application icon, other images, and localized content) in
the top-level bundle directory. The same rule applies to Framework
Bundles.
Explicitly enable deprecated warnings by default, via the
cmake::GetSuppressDeprecatedWarnings method, which signals
suppression is turned off unless the CMake variables are set
as required.
Add tests and update the documentation for the new
functionality.
Change the '-Wdev' and '-Wno-dev' options to also enable and
suppress the deprecated warnings output, via the
'CMAKE_WARN_DEPRECATED' CMake variable, by default. This
action does not happen if the user specifies a deprecated
warning message option.
Add tests and update the documentation for the new
functionality.
Add 'deprecated' warning options type, to allow setting
CMAKE_WARN_DEPRECATED via the -W '-Wdeprecated' and
'-Wno-deprecated' options.
Add tests for new options and updated documentation.
Refactor the -Wdev and -Wno-dev options parser to use a generic -W
parser that follows the GCC pattern, excluding support for
-Werror=TYPE and -Wno-error=TYPE formats for now.
Explicitly enable author warnings by default, via the
cmake::GetSuppressDevWarnings method, which signals suppression
is turned off unless the CMake variables are set as required.
Add test cases for author and deprecated messages displayed by
default.
Make the message suppression more consistent, by adding a check
for the message related CMake variables in cmake::IssueMessage,
which allows callers of IssueMessage other than the message
command to behave as expected. Also added a check for
CMAKE_SUPPRESS_DEVELOPER_WARNINGS in the message command to
mirror the deprecated message type behaviour.
Added a 'force' flag to the cmake::IssueMessage method, to
make the message suppression consistent, when setting the
message related CMake variables directly in a CMake file.
Expand message command tests to cover the AUTHOR_WARNING message
type as well.
Change the Cobertura handler to look for an environment variable
called "COBERTURADIR" which contains the directory where the
coverage.xml file is found. If that variable doesn't exist,
continue to use the default of the binary directory.
Update the test to use an appropriate value in the environment
variables.
This fixes a bug where 64 bit builds with /bigobj incorrectly determined
that the object files were not 64 bit. This manifested itself with
printf type functions showing up as undefined because the leading
underscore was being removed and should not be removed.
If a custom command has a SYMBOLIC output (that is never actually
created) then do not mark the custom command build statement as
'restat'. Otherwise other custom commands that depend on the symbolic
output may not always re-run because after running the first custom
command Ninja 'restat' will detect that the output timestamp did not
change and skip its dependents.
This was observed with the ExternalProject BUILD_ALWAYS option where
Ninja would not re-run the 'install' step each time 'build' re-runs.
Refactoring in commit v3.4.0-rc1~74^2~1 (MSVC: Rewrite manifest file
handling with Makefile and Ninja, 2015-09-15) broke handling of this
option. Fix it and add a test case.
Commit c389f8bb (cmLocalGenerator: Port Find method away from
GetGeneratorTarget, 2015-10-25) ported the implementation of
FindGeneratorTargetToUse away from the FindTargetToUse method,
but neglected to handle alias targets.
The latter method has a parameter to determine whether to
include alias targets in the search, but as that is only
needed at configure time, this generate-time equivalent does
not need the condition.
Changes in commit v3.4.0-rc1~124^2~1 (cmFindProgramCommand: Re-implement
search using more flexible approach, 2015-09-01) did not preserve the
behavior of looking for the given name with no search path at all.
Fix this and add a test case covering finding an absolute path with
no search directories.
In some cases, CMake returned the following error:
-- Checking for module 'foo'
-- Package 'foo' not found
When the actual error returned by pkg-config was:
Package 'bar', required by 'foo', not found
Now, the actual error is forwarded to the user.
-- Checking for module 'foo'
-- Package 'bar', required by 'foo', not found
For the standard case (i.e. the package was indeed not found), the
CMake error was:
-- Checking for module 'foo'
-- Package 'foo' not found
But it now prints:
-- Checking for module 'foo'
-- No package 'foo' found
The associated test was also updated. ${last} refers to the last
CLI argument.
Refactoring in commit v3.4.0-rc1~390^2~1 (cmCTestMultiProcessHandler:
Refactor RUN_SERIAL implementation, 2015-06-01) forgot to update a code
path for cleaning up after a failed RUN_SERIAL test. This causes an
infinite loop after a RUN_SERIAL test fails. Fix it and add a test.
a4bbdc5e cmLocalGenerator: Remove cmGeneratorTargetsType from setter API.
04b6bb16 cmLocalGenerator: Simplify semantic of adding generator targets.
400e3d19 cmLocalGenerator: Don't store imported generator targets
726e461b CMP0063: Split unit test by target type.
Commit v3.4.0-rc1~494^2~4 (cmMakefile: Add API for elseif to create
backtrace., 2015-05-29) removed the use of cmMakefileCall to push/pop
execution context in favor of a new way to create backtraces.
However, a call to cmMakefile::GetExecutionContext is still invoked to
issue a contextual CMP0054 warning through cmConditionEvaluator. As
the elseif is not part of the call stack, this resulted in trying to
access an empty vector.
Avoid the attempt at getting execution context when evaluating elseif by
constructing a context and backtrace on behalf of the cmConditionEvaluator
in all cases.
The HTML file for the Delphi Code coverage was being found by the
Dashboard coverage run of CMake itself. Switch it to be a configured
file to eliminate this extra reading.
Add new API for the subdirs command to cmState.
This fixes a regression introduced in commit f716460e (cmMakefile: Move
invokation to initialize snapshot., 2015-10-06).
Brad King
Zack Galbreath
Domen Vrankar
Jean-Christophe Fillion-Robin
Felix Geyer
Taylor Braun-Jones
Davy Durham
Ben Boeckel
Andreas Schuh
Ruslan Baratov
Mariusz Pluciński
Gregor Jasny
Antonio Perez Barrero
Philippe Proulx
Fabian Otto
Dimitar Yordanov
Jose-Luis Blanco-Claraco
Orion Poplawski
Sebastian Schuberth
Ashley Whetter
Sam Thursfield
Roger Leigh
Marc Chevrier
Yves Frederix
Michael Scott
James Johnston
Matthias Maennich
Bartosz Kosiorek
Bartosz Kosiorek
Roger Leigh
Joseph Snyder
Bill Hoffman
Stephen Kelly
Raffi Enficiaud
Benjamin Chrétien