PASS_REGULAR_EXPRESSION and FAIL_REGULAR_EXPRESSION both take a list of expressions.
Stop searching if the first of those has matched the output as the result will not
change anymore.
Because of clock scew between processors or just because of someone changing
the system time the end timestamp may be before the start time. Reporting a
negative time doesn't any sense, just report zero there as it already happens
for really fast tests.
The --workaround-gcc296-bugs has been part of the default Valgrind flags since
Valgrind support was added in commit 5b232ded15
(ENH: Add initial memory check support which works for Valgrind, 2003-12-15).
The Valgrind manpage says that this option should be avoided if not really
needed as it may cause real errors to get ignored. If someone uses a compiler
that really needs the flag this flag should be set by the user explicitely.
Most users will never set any flags and probably never notice that they use a
flag they shouldn't.
The memory checker command can't be quoted at this point, because previously it
has been tested that the given file exists, which will fail if the name is
quoted. The CTestTestMemcheckUnknown test aimed to test this case, has always
failed to do so and serves no useful purpose therefore.
The phrase "flag used" is somewhat imprecise, so extend it to stress
intentions.
Also correct:
- "Flag" => "Flags"
- "[CMAKE_BUILD_TYPE]" => "<CONFIG>"
dea1df4 Memoize usage requirement include directories in a config-specific map
26dba6a Fix include dir propagation from conditionally linked targets
b8259c3 Centralize maintenance of usage requirement include directories
Commit 42ebb188 (Memoize includes and defines from interface libraries.,
2013-02-22) introduced caching of the includes. Fix the memoization to
be configuration-specific so that we do not accumulate entries across
multiple evaluations in a multi-config generator.
Generator expressions, including configuration-specific expressions may
be used as link libraries of targets. The old-style keywords of
target_link_libraries are handled in terms of new generator expressions.
However, the generator expressions expect target names to be valid
against a regular expression, whereas target_link_libraries does not
require validation. In generator expression constructed without any
action from the user we need to ensure that only valid expressions are
generated. Ensure that strings which are not valid target names are not
used in generator expressions which validate the argument.
Code like
target_link_libraries(B debug A)
generates usage requirement references such as "$<$<CONFIG:DEBUG>:A>".
When cmTarget::GetIncludeDirectories uses such references it generates
expressions like:
$<TARGET_PROPERTY:$<$<CONFIG:DEBUG>:A>,INTERFACE_INCLUDE_DIRECTORIES>
When the conditions are false such references evaluate as an empty
string and the expression fails with an error such as:
$<TARGET_PROPERTY:tgt,prop> expression requires a non-empty target name.
Fix this by teaching cmTarget::GetIncludeDirectories to wrap the above
expression inside a conditional:
$<$<BOOL:$<$<CONFIG:DEBUG>:A>>:...>
so that $<TARGET_PROPERTY:...> will not be evaluated with an empty
target.
Maintain a target's internal list of usage requirement include
directories whenever the LINK_LIBRARIES property is set by either
target_link_libraries or set_property.
Re-word the documentation to make clear that CMake integrates usage
requirements during generation and not synchronously during
configuration or execution of target_link_libraries.
In commit 236133e7 (Handle targets in the LINK_LIBRARIES of try_compile,
2013-02-09) an error return case was added without closing the file in
progress. Add the missing fclose() call.
Spotted by sevenhill.
This allows the ctest_build command's TARGET option to name a target
in a subdirectory and still build properly with msbuild.
Add test case covering use of ctest_build() with such a TARGET.
In cmCTestHandlerCommand::InitialPass call InitializeHandler after setting
the CTest "SourceDirectory" and "BuildDirectory" configuration values
instead of before. This makes the values available to InitializeHandler
methods in subclasses, so also drop the duplicate configuration of those
values from cmCTestConfigureCommand::InitializeHandler.
Use cmVisualStudioSlnParser in GenerateBuildCommand() to provide correct
command line for MSBuild even when target project is stored in a
subdirectory.
Create class cmVisualStudioSlnParser as a generic parser for Visual
Studio .sln files. Implement minimum functionality but keep class
extensible. Add tests for the class.
Extend the cmGlobalGenerator::GenerateBuildCommand virtual method
signature with a "projectDir" parameter specifying the top of the
project build tree for which the build command will be generated.
Populate it from call sites in cmGlobalGenerator::Build where a
fully-generated build tree should be available.
Use the suggestion from http://support.microsoft.com/kb/2262855 to escape
semicolons in preprocessor definitions for VS >= 10. Update the
COMPILE_DEFINITIONS documentation disclaimer list of known limitations
accordingly. Update our "Preprocess" test to cover the case.
Suggested-by: Jean-Christophe Fillion-Robin <jchris.fillionr@kitware.com>
Transform the path using ConvertToNinjaPath just as we do for all other
paths. This fixes the OutOfSource test for objects in the ../OutOfBinary
directory by computing the proper full path for the /Fd option.
The MS tools create two types of PDB files as explained here:
http://msdn.microsoft.com/en-us/library/yd4f8bd1%28v=vs.71%29.aspxhttp://msdn.microsoft.com/en-us/library/yd4f8bd1%28v=vs.80%29.aspxhttp://msdn.microsoft.com/en-us/library/yd4f8bd1%28v=vs.90%29.aspxhttp://msdn.microsoft.com/en-us/library/yd4f8bd1%28v=vs.100%29.aspx
One is created by the compiler (/Fd) and the other by the linker (/pdb).
The two options should not specify the same file. Split them up.
In the VS IDE generators, simply drop ProgramDataBaseFileName to
take the VS default "/Fd$(IntDir)vc$(PlatformToolsetVersion).pdb".
In the Makefile generators, set "/Fd" on the compile line to be
the directory containing object files (with a trailing slash the
compiler will add the "vc$(PlatformToolsetVersion).pdb" filename
automatically). Drop the /Fd option from the exe link command
line and add "/pdb" instead (already done for dll linking).
Update these rules for both MSVC and Intel tools.
Drop support for PDB_OUTPUT_DIRECTORY and PDB_NAME in STATIC
libraries because the generated .pdb files are only from /Fd
and not real linker-generated .pdb files. Update documentation to
clarify that the PDB_* properties are only for linker .pdb files.
This regresses the PDBDirectoryAndName test for STATIC libraries.
Since it is not clear at this time what should be done for STATIC
library .pdb files, comment out the relevant portion of the test
and leave a TODO comment.
In commit 0c727b90 (install(EXPORT): Force absolute paths for usr-move,
2013-03-08) and commit d4774140 (configure_package_config_file: force
absolute paths for usr-move, 2013-01-24) we supported Linux
distributions implementing the "/usr move" by assuming that installation
to (/usr)?/lib(64)? represents a non-relocatable system package.
When cross-compiling one may prepare a package for installation into a
system location on a target machine but install the package files on the
*host* machine inside another path for use with CMAKE_FIND_ROOT_PATH.
In this case the package development files must still be relocatable.
Handle "/usr move" with a new approach that works with relocatable
files. Teach configure_package_config_file and install(EXPORT) to
generate special logic in a package configuration file or targets file
for installation under (/usr)?/lib(64)?. Teach the file to recognize
when it is loaded through a symlink that refers to the same realpath as
its original install destination. In such a case, use the original
install prefix. Otherwise, compute the prefix relative to the current
file location to make it relocatable.
In VS IDE generators add a pre-build event to perform automoc instead of
using a separate custom target. This reduces the number of targets in the
.sln that need to be loaded by the IDE.
This also works around a VS 11 bug as discussed in issue 13900.
Suggested-by: Hauke Heibel <hauke.heibel@gmail.com>
When called with a non-existent LHS target name the user may be trying
to add file-level dependencies. Clarify the error message to explain
the difference between target-level and file-level dependencies. Point
the reader at the commands and options needed for the latter.
We can do this check only if the TargetName is non-empty, which means
that we're evaluating INTERFACE_INCLUDE_DIRECTORIES from a linked
dependency which was set using target_link_libraries.
It is possible to have relative paths in INCLUDE_DIRECTORIES already
in CMake 2.8.10.2, so that part will require a policy to fix.
It is considered an error if the INTERFACE_INCLUDE_DIRECTORIES contains
a directory which does not exist, which indicates a programmer error
by the upstream, or a packaging error.
One of the RunCMake.CompatibleInterface tests also needs to be updated
due to this change. Non-existant includes were used in the test, but
are not needed.
Check that source and binary directories are not part of the
INTERFACE_INCLUDE_DIRECTORIES for installed IMPORTED targets.
This is limited to directories which do not contain generator
expressions to evaluate. Such paths can only be checked at time
of use of the imported target, which will be done in a follow up
patch.
The VS version we generate in the .sln header is used by VS when opening
the file through Windows Explorer and possibly elsewhere. Fix our
generators to use version strings known to VS to avoid a drop-down box.
For VS 10, since commit 4f96af44 (Fix VS 10 .sln files for Windows
Explorer, 2009-10-22) we use "Visual Studio 2010" instead of just
"Visual Studio 10". This is correct except that for the Express edition
we need "Visual C++ Express 2010".
For VS 11, since commit f0d66ab4 (VS11: Fix comment generated at the top
of *.sln files, 2011-10-20) we use "Visual Studio 11" in the .sln header
but the preferred value is "Visual Studio 2012" (just as the first
commit mentioned above fixed for VS 10). Also for the Express edition
we need "Visual Studio Express 2012 for Windows Desktop".
The API for retrieving per-config COMPILE_DEFINITIONS has long
existed because of the COMPILE_DEFINITIONS_<CONFIG> style
properties. Ensure that the provided configuration being generated
is also used to evaluate the generator expressions
in cmTarget::GetCompileDefinitions.
Both the generic COMPILE_DEFINITIONS and the config-specific
variant need to be evaluated with the requested configuration. This
has the side-effect that the COMPILE_DEFINITIONS does not need to
be additionally evaluated with no configuration, so the callers can
be cleaned up a bit too.
In some languages the compiler may need to know the path of the final
target file for which an object is being compiled. Honor the <TARGET>
placeholder for compilation rules to support such cases.
Note that this cannot work with OBJECT library targets because the final
target path is not known during compilation (there can even be more than
one final target).
Suggested-by: Vittorio Giovara <vittorio.giovara@gmail.com>
The commit d2536579 (Automoc: fix regression #13667, broken build in
phonon, 2012-11-19) changed Automoc to try to re-add the Qt header dir
if it was stripped out as an implicit include from the moc command
line. When invoking a compiler, those directories are stripped out
because they are built-in, but for moc, there are no built-in directories.
The follow-up commit acc22400 (Automoc: get include dirs without
stripping implicit include dirs off, 2012-12-07) went further by not
removing the implicit include dirs, if they were specified specifically
by the user.
This had the remaining problem that the implicit include dirs appeared
in a different order of precedence for moc compared to the compiler.
Resolve that by stripping out the include dirs, where specified for
the moc command line to, and then appending them at the end. Note that
the order of the appended implicit include directories is the order
they are specified in the CMAKE_CXX_IMPLICIT_INCLUDE_DIRECTORIES, not
the order specified by the user.
Rename the variable added by commit 9ce1b9ef (Add
CMAKE_BUILD_INTERFACE_INCLUDES build-variable, 2012-11-25) to
CMAKE_INCLUDE_CURRENT_DIR_IN_INTERFACE to be more consistent with the
existing CMAKE_INCLUDE_CURRENT_DIR variable.
Suggested-by: Alex Neundorf <neundorf@kde.org>
If there is a Qt 5.0.3 release, it may or may not contain the patch
that fixes this issue.
http://thread.gmane.org/gmane.comp.lib.qt.releasing/882
Just use the workaround until 5.1.0 which certainly will contain the
fix. Don't use the workaround before Qt 5.0.0.
We can't find both preprocessing expressions at once, because then
the BUILD_INTERFACE will always be favored if both are present, even
if INSTALL_INTERFACE appears first.
This was affecting the behavior of install(EXPORT) because the
INTERFACE_INCLUDE_DIRECTORIES contained entries like
/foo/include;$<INSTALL_INTERFACE:/bar/include>
As the INSTALL_INTERFACE always evaluates to '0', it always needs
to be preprocessed properly.
27e6f6e TI compiler: add automatic detection of prefix and suffixes
b301586 rename TI_DSP toolchain to TI, since it works also for the ARM compiler
12b25df Determine C/CXX/Fortran compiler: fix indentation
7baa55a Determine C/CXX/Fortran compiler: minor restructuring
d90f49b CTest: Fail early without PROJECT_BINARY_DIR (#14005)
2e1c2bd build_command: Fail early without CMAKE_MAKE_PROGRAM (#14005)
4e5cb37 Refactor RunCMake.build_command test to allow more cases
ab079ee Avoid crash when checking property compatibility without link info
92a2ab7 Avoid crash when checking property link dependencies without link info
The commit in qtbase 9dfba89c (Add implementations of QAIM::sibling in
public APIs., 2012-09-26) added a buggy implementation of sibling(), and
the commit f136701b (Use the base implementation of
QAbstractItemModel::sibling in QSIM., 2013-02-21) resolves it.
Workaround the bug for Qt releases that have it.
If CMAKE_MAKE_PROGRAM is not set fail with an error message instead of
crashing. Suggest calling project() or enable_language() first to
ensure that CMAKE_MAKE_PROGRAM is set.
Commit 79568f95 (automoc: Add source file to target early to set the
linker language, 2013-02-20) changed automoc initialization to a two
step process. In the first step, the generated source file was added
to the target, which allows the link language to be determined.
However, this bypassed the check for the availability of Qt itself.
At build-time the automoc file could not be generated because the moc
tool was not available to create it.
The solution is to only add the automoc file to the target if Qt is
found.
Teach the compatibility check added by commit 042ecf04 (Add API to
calculate link-interface-dependent bool properties or error, 2013-01-06)
to return early if no link information is available. This avoids
crashing in a case that should fail with an error message.
Teach the isLinkDependentProperty helper added by commit e9879910 (Make
INTERFACE determined properties readable in generator expressions,
2013-01-19) to return early if no link information is available.
Extend the range of valid target names with the + sign. This character
can commonly be used for target names, such as those containing 'c++'.
Add a test but skip it for Borland and Watcom tools which do not support
the character.
Suggested-By: Benjamin Kloster
When the command is invoked without an explicit build directory path we
compute it from the source directory path. When either the source or
build tree is the root of a Windows drive letter it will have a trailing
slash. Handle slashes consistently when substituting the current output
directory for the current source directory.
While at it, use cmSystemTools::IsSubDirectory instead of FindLastString
to verify that the source directory is a subdirectory.
Inspired-by: Graham Menhennitt <graham@menhennitt.com.au>
* Clarify accepted values of <LANG> suffix in CMAKE_COMPILER_IS_GNU<LANG>.
* Clarify fact that target property GENERATOR_FILE_NAME usually cannot be
used at configure time.
* Clarify that enable_language() can only be used in global scope of
top-level project using language.
* State that enable_language(... OPTIONAL) currently doesn't work.
* Document regular expression operator precedence.
If the absolute install(EXPORT) destination for the CMAKE_INSTALL_PREFIX
used during configuration is under (/usr)?/lib(64)? then assume the
current build is for a system package installation instead of a
relocatable distribution. Generate an absolute path for _IMPORT_PREFIX
in the target exports file instead of generating code to compute the
value relative to the file location. This is necessary for
distributions implementing a move to /usr such as:
https://wiki.archlinux.org/index.php/DeveloperWiki:usrlib
"All files in the /lib directory have been moved to /usr/lib and now
/lib is a symlink to usr/lib."
The relative path computation is not reliable because the targets file
could be installed through cross-prefix a symlink and loaded without it
or vice versa.
A similar change was made for package configuration file generation by
commit d4774140 (configure_package_config_file: force absolute paths for
usr-move, 2013-01-24).
Teach the WriteGroup method return true if a group or any of its
children have source files. Have children write their output to a
temporay cmOStringStream. Add it to the real output only if not empty.
Only check a release version for the minimum required version. If NSIS
returns a CVS build version string (as when built by Macports), skip the
version check altogether and assume a sufficiently new version. Also
correctly handle the case where the version check fails and the
CPACK_TOPLEVEL_DIRECTORY option is not set.
Co-Author: Graham Menhennitt <graham@menhennitt.com.au>
Commit a1c4905f (Use the link information as a source of compile
definitions and includes., 2013-02-12) introduced the use of link
information as the source of target properties via the TARGET_PROPERTY
generator expression. This generator expression has a strict
interpretation of a valid target name and emits a fatal error for
invalid names.
Ensure that only targets with names valid for use with TARGET_PROPERTY
or targets which are determined by generator expressions are processed
by it. This means that at worst, invalid target names do not participate
in the transitive evaluation of properties, but the validation
generator expression can be extended where needed to resolve that.
cbf0756 Revert "Add the TARGET_DEFINED generator expression"
21a342c Remove use of TARGET_DEFINED from the target_link_libraries test.
47b8d32 Remove use of TARGET_DEFINED from the ExportImport test.
2e39d21 Remove use of TARGET_DEFINED from target_include_directories test.
Use the /STACK: flag to pass the value through flag parsing so that the
generator converts it to the StackReserveSize project file option. The
option was accidentally left out by commit 7491f529 (first pass at VS
10, 2009-06-25).
Suggested-by: goatboy160@yahoo.com
As of commit 1da75022 (Don't include generator expressions in
old-style link handling., 2012-12-23), such entries are not
included in the LinkLibraries member. Generator expressions in
LinkLibraries are not processed anyway, so port to the new way
of getting link information.
In the case of input like
foo$<1:bar>
the preGenex should be 'foo'. In that case, the search for a ';'
will not find one, and there is no preceding input to process as a
non-genex list.
Previously, the result of 'splitting' such a string would instead
be a vector containing the same string two times.
8dfdf1c Fix the tests for evaluating includes and defines.
98a6725 Fix constness of accessors.
7e70744 Expand includes and defines transitively in 'external' genexes.
d1a2729 Fix DAG checker finding cycling dependencies.
e72eaad Workaround broken code where a target has itself in its link iface.
ec2c67b Strip stray semicolons when evaluating generator expressions.
236133e Handle targets in the LINK_LIBRARIES of try_compile.
1c0597c Add a new Export generator for IMPORTED targets.
f2ab17d Keep track of all targets seen while evaluating a genex.
This reverts commit 2bee6f5ba5.
This expression is not used, and has a semantic which is not completely
optimal (namely considering utility targets to be targets, though
usually we are interested in linkable targets).
Remove it so that we have more freedom to define better expressions in
the future.
Conflicts:
Source/cmGeneratorExpressionEvaluator.cxx
Tests/CMakeCommands/target_compile_definitions/CMakeLists.txt
Tests/CMakeCommands/target_compile_definitions/consumer.cpp
This is similar in spirit to commit e48d8420 (Cache context-independent
includes on evaluation., 2013-02-03), but it is needed since commit
a1c4905f (Use the link information as a source of compile definitions
and includes., 2013-02-12), which changed how includes and defines
are determined. As they are now determined through the link interface,
we need to cache the result of evaluating them through that.
In the case of the includes, the result was already being cached
and then immediately disposed. Store the result as a member variable
instead to make use of the caching.
We should also check whether the INTERFACE_ variant of a property
is being read, and in the case of the compile definitions, we should
test the _<CONFIG> suffixed variants. That is already available
through the use of the methods.
This way, we use the ALREADY_SEEN optimization when evaluating
the includes of a target in 'external' generator expressions, ie, those
used in a add_custom_command invokation, as opposed to evaluating the
INCLUDE_DIRECTORIES of a target itself via GetIncludeDirectories.
This means that we can use expressions of the form
$<TARGET_PROPERTY:foo,INTERFACE_INCLUDE_DIRECTORIES>
to get a list of the interface include directories of foo, including
those coming from dependencies.
We can't have a test of a target which has a single include directory in
its INCLUDE_DIRECTORIES because the shell on the MSYS platforms transforms
a single include directory to include a prefix, which is not what the test
expects. We test a target with two directories instead as a means to
test a target with no link dependencies.
Before this patch, the following is reported falsely as a self-reference:
target_link_libraries(empty2 LINK_PUBLIC empty3)
target_link_libraries(empty3 LINK_PUBLIC empty2)
add_custom_target(...
-DINCLUDES=$<TARGET_PROPERTY:empty2,INTERFACE_INCLUDE_DIRECTORIES>
)
The reason is that the existing code assumed that all reading of
include directories would be done through cmTarget::GetIncludeDirectories()
and would therefore be initialized with a DagChecker. That is not the case
if reading the property with an 'external' generator expression.
There is a test for this since commit 8e756d2b (Tolerate cycles in
shared library link interfaces (#12647), 2012-01-12), so make sure
it continues to pass, even as we require no self-references in new
INTERFACE_ property generator expressions.
In commit bed6c388 (VS,Xcode: Remove unused CMAKE_GENERATOR_* variables,
2013-02-19) we removed this variable among others from the VS generator
claiming they were all not used. In fact the Fortran compiler detection
module CMakeDetermineFortranCompiler.cmake uses CMAKE_GENERATOR_FC even
for the Visual Studio IDE generators because it does not use the full
IDE compiler id detection like the C and C++ language files do.
Imported targets are re-exported so that they can be used by the
try_compile generated code with target_link_libraries.
This makes the use of the cmake_expand_imported_targets macro
obsolete. The macro is not able to expand the generator expressions
which may appear in the IMPORTED_LINK_INTERFACE_LIBRARIES content.
Instead it just sees them as 'not a target'.
Previously, GetIncludeDirectories was called before calling
target->AddSourceFile(mocCppSource). Since commit a1c4905f (Use the
link information as a source of compile definitions and
includes., 2013-02-12), the include directories are determined by
the link information.
Valid link information requires that the linker language can be
determined, which depends on the source files languages and the
dependent targets languages. In the case of the no_link_languages
target in the unit test, there are no dependencies and the additional
source file no_link_languages_automoc.cpp is added to the target
at generate-time. That file can be used to determine the linker
language, but it must be added to the target before calling
GetIncludeDirectories.
Instead of generating a whole bunch of repeated if-statements
now a foreach()-loop is generated in the targets-file.
Also now a comment is inserted in the generated file if no
targets from other export sets are used, so if somebody looks
at the file he can see whether the information about missing
imported targets has been generated or not.
Alex
e83e6a1 Test Unix Makefiles generator support for changing compilers
c307e1c Tests/RunCMake: Allow tests to control build tree behavior
2963c98 Merge branch 'empty-compiler-crash' into compiler-change-cleanup
1df09e5 Delete entire CMakeFiles directory when deleting CMakeCache.txt (#13756)
Generate a unique PBXTargetDependency and PBXContainerItemProxy for
every edge in the dependency graph as required by the Xcode format.
Xcode only accidentally loads project files that re-use the same
PBXTargetDependency for every edge leading to a single target. If one
is removed by hand in the IDE then Xcode may crash due to dangling
references from the others.
Since cmGlobalXCodeGenerator::AddDependTarget is called exactly once for
every edge in the target dependency graph we do not need to keep track
of which edges have been visited to avoid generating duplicates.
The modern cmComputeTargetDepends guarantees there will by no cycles.
Drop the Xcode generator's check which only handled length 1 and 2
cycles anyway.
f616ff2 Update generator to use new cmGeneratorTarget api.
674bd6e Merge branch 'master' into sublime-text-2-generator
4760ead Remove ability to generate sublime clang files.
da0898e Correct missing parameter to CMP0018Flags call.
badb40d Merge branch 'master' into sublime-text-2-generator
b3ae61f Merge branch 'master' into sublime-text-2-generator
089d9cc SublimeText 2 Gen: Set the sublimeclang_options_script property.
44c2eee Merge branch 'master' into sublime-text-2-generator
304b885 Sublime Text 2 Gen: Per-source Compile flags are now saved in a separate file.
5b2aa3d SublimeText2 Gen: Fixed the issue where include directory flags used -D
90bcb77 SublimeText2 Gen: Improved use of define, include flags from CMAKE_C(XX)_FLAGS
cc84072 Merge branch 'master' into sublime-text-2-generator
8670cbe Define flags in CMAKE_C(XX)_FLAGS are now included in SublimeClang settings.
d022d4e Merge branch 'master' into sublime-text-2-generator
9cd3e70 Fixed Sublime Text project generation for in-source builds
44f35f7 Added a CMAKE_SUBLIMECLANG_DISABLED variable that disables SublimeClang.
...
SublimeClang is a optional plugin to SublimeText and I felt it
shouldn't be part of the generator for the following reasons:
1. Reduces the amount of sublime and sublimeClang specific
code we have to maintain inside CMake.
2. In testing the SublimeClang commands generated did not work
for the VTK project.
For people that do want this feature I recommend that they
looking into https://gist.github.com/robertmaynard/4724705 for a
way to use CMAKE_EXPORT_COMPILE_COMMANDS to generate JSON files
that can be used by SublimeClang.
Since the topic merged to master by commit 34a02846 (Merge topic
'ide-compiler-id', 2012-08-24), these variables are not used by
CMakeDetermine*Compiler.cmake for VS and Xcode generators. Drop the
code that sets them.
Since commit e015df7d (...delete CMakeFiles directory when cache is
deleted, 2006-02-20) we deleted the files in the CMakeFiles directory
when deleting CMakeCache.txt in order to reset the build tree to a fresh
state. This allowed commit fd33bf93 (fix for bug 6102, allow users to
change the compiler, 2007-12-13) to delete CMakeCache.txt when the user
changes the compiler and CMakeFiles/CMake<lang>Compiler.cmake and other
platform information files would go with it to allow a fresh start.
Then commit 7195aca5 (Make platform information files specific to the
CMake version, 2012-08-24) moved the platform information files to a
subdirectory e.g. CMakeFiles/<version>/CMake<lang>Compiler.cmake where
<version> is the current CMake version. This causes the compiler change
logic to fail to remove all old compiler information. Then on the next
configuration CMake<lang>Compiler.cmake would set CMAKE_<lang>_COMPILER
back to the old value and re-trigger the compiler change logic. This
causes an infinite loop of cache deletion and compiler reset.
Fix this simply by teaching cmCacheManager::DeleteCache to remove the
entire CMakeFiles directory recursively whenever it removes an existing
CMakeCache.txt. This fully resets the build tree to configure with a
fresh compiler.
Since Xcode doesn't sort the files on its own, let's sort them in our
generator to make navigation easier. Visual Studio, QtCreator, and
kdevelop all display files sorted.
fde949d Don't add target-specific interface includes and defines to Qt 4 targets.
79ae968 Revert "Add a way to exclude INTERFACE properties from exported targets."
71bf96e Revert "find_package: Reword <package>_NO_INTERFACES documentation"
3df36b5 Revert "Add the $<LINKED:...> generator expression."
e1f9080 Don't populate INTERFACE includes and defines properties in tll.
567c8d1 Revert "Don't allow utility or global targets in the LINKED expression."
a1c4905 Use the link information as a source of compile definitions and includes.
5c9f5e3 Don't use LINKED where not needed.
5b88504 Rename the IncludeDirectoriesEntry to be more generic.
b030323 Fix determination of when we're evaluating compile definitions.
The GNU compiler front-ends on AIX invoke the linker with flags of the
form "-L/path/to/gnu/runtime/lib" to tell ld where to find the language
runtime libraries. They depend on the default libpath behavior
documented in "man ld" to add the -L paths also to the runtime libpath
so the dynamic loader can find the language runtime libraries. This
differs from platforms whose linkers have distinct -rpath flags that
non-system compilers can use to tell the dynamic loader where to find
their language runtime libraries.
Since commit 96fd5909 (Implement linking with paths to library files,
2008-01-22) CMake always passes "-Wl,-blibpath:" followed by any
project-defined RPATH plus "/usr/lib:/lib" in order to explicitly set
the runtime libpath and avoid getting all the project -L paths in the
runtime libpath. The explicit libpath prevents the GNU compiler runtime
library -L paths from being placed in the libpath and then the dynamic
loader fails to find the language runtime libraries.
CMake already detects the implicit link directories for each language
since commit 07ea19ad (Implicit link info for C, CXX, and Fortran,
2009-07-23). Add the implicit link directories to the explicit runtime
libpath for GNU compilers on AIX to fix this use case.
This reverts commit 2c3654c3de.
The removal of some tests added in commit 77cecb77 (Add includes and compile
definitions with target_link_libraries., 2012-11-05) are also squashed
into this commit.
This is a partial revert of commit 77cecb77 (Add includes and compile
definitions with target_link_libraries., 2012-11-05).
As the interface includes and defines are now determined by the link
closure, there is no need to populate the corresponding properties
explicitly.
After evaluating the INTERFACE_INCLUDE_DIRECTORIES, of a target in a
generator expression, also read the INTERFACE_INCLUDE_DIRECTORIES of
its link interface dependencies.
That means that code such as this will result in the 'user' target
using /bar/include and /foo/include:
add_library(foo ...)
target_include_directories(foo INTERFACE /foo/include)
add_library(bar ...)
target_include_directories(bar INTERFACE /bar/include)
target_link_libraries(bar LINK_PUBLIC foo)
add_executable(user ...)
target_include_directories(user PRIVATE
$<TARGET_PROPERTY:bar,INTERFACE_INCLUDE_DIRECTORIES>)
Also process the interface include directories from direct link
dependencies for in-build targets.
The situation is similar for the INTERFACE_COMPILE_DEFINITIONS. The
include directories related code is currently more complex because
we also need to store a backtrace at configure-time for the purpose
of debugging includes. The compile definitions related code will use
the same pattern in the future.
This is not a change in behavior, as existing code has the same effect,
but that existing code will be removed in follow-up commits.
Since commit 34c882a9 (Allow VS 7 project Rebuild and Solution Rebuild to
work, 2007-11-10) we use a "CMakeFiles/generated.stamp" and some
associated files in the build tree to avoid re-running CMake when the
inputs have not changed but VS has cleaned the outputs it knows about.
When we do not really need to re-run we restore the generated.stamp file.
The non-re-run case can happen in multiple targets in parallel in VS >= 10
so we must restore the file atomically to avoid races. Write the stamp
file to a random temporary name and then atomically rename it to the real
stamp file.
ba48e63 Generate config-specific interface link libraries propeties.
deb51a7 Remove unused forward declarations.
9712362 Don't allow utility or global targets in the LINKED expression.
faa927e Make sure INTERFACE properties work with OBJECT libraries.
510fdcb Whitelist target types in target_{include_directories,compile_definitions}
4de7178 Ensure that the build interface includes have been added.
df74bc3 Only append build interface include dirs to particular targets.
d4e5c67 Don't keep track of content determined by target property values.
1fb545a Move a special case for PIC from the genex to the cmTarget code.
57175d5 Only use early evaluation termination for transitive properties.
4cf161a Fix determination of evaluating link libraries.
3a298c0 Fix generation of COMPILE_DEFINITIONS in DependInfo.cmake.
655e98b Ensure type specific compatible interface properties do not intersect.
46e2896 The COMPATIBLE_INTERFACE does not affect the target it is set on.
5f926a5 Test printing origin of include dirs from tll().
7c0ec75 De-duplicate validation of genex target names.
...
Since commit fd33bf93 (fix for bug 6102, allow users to change the
compiler, 2007-12-13) we keep an internal ;-list of language compiler
variable and value pairs. Preserve empty values on expansion to ensure
that the key/value pairing remains consistent.
This is needed in the case that Automoc is used, as that calls
GetIncludeDirectories, which may cache the resulting include dirs
too early in the generate step.
Also, because the automoc step is so early, we can't cache the
include directories at that point. At that point the build interface
of all dependencies are not populated yet, so we'd be caching the
includes before appending the build interface. Only start caching
when we're definitely generating the buildsystem. At that point, the
includes should be stable.
We still need to invoke AppendBuildInterfaceIncludes
in the GlobalGenerator because the build interface includes affect
mostly the dependencies of targets (such as the automoc targets),
rather than the targets themselves, so the build interface needs
to be appended for all targets before generation is done.
The ctest_configure command already reads the CTEST_CMAKE_GENERATOR
variable to get the value for the cmake -G option. Read new variable
CTEST_CMAKE_GENERATOR_TOOLSET for -T.
The "ctest --build-and-test" mode already has "--build-generator" to
specify the -G option to CMake. Add a "--build-generator-toolset" option
to specify the -T value.
Implement generator toolset selection (cmake -T) for VS >= 10 by setting
the PlatformToolset. Extend the RunCMake.GeneratorToolset test case to
verify CMAKE_GENERATOR_TOOLSET when the generator supports -T.
Since commit 485a940e (VS: Simplify MSVC version reporting, 2012-08-23)
all MSVC version information is detected during the compiler id step
from the actual compiler invoked by generated build systems rather than
hard-coded in VS generators. Therefore we can set the PlatformToolset
in VS >= 10 project files and support toolsets from other VS versions.
Reject the option by default. It will be implemented on a per-generator
basis. Pass the setting into try_compile project generation. Add cache
entry CMAKE_GENERATOR_TOOLSET and associated variable documentation to
hold the value persistently.
Add a RunCMake.GeneratorToolset test to cover basic "-T" option cases.
Verify that CMAKE_GENERATOR_TOOLSET is empty without -T, that -T is
rejected when the generator doesn't support it, and that two -T options
are always rejected.
This tracking was added during the development of commit 042ecf04
(Add API to calculate link-interface-dependent bool properties
or error., 2013-01-06), but was never used.
It was not necessary to use the content because what is really
useful in that logic is to determine if a property has been implied
to be null by appearing in a LINK_LIBRARIES genex.
I think the motivating usecase for developing the feature of
keeping track of the targets relevant to a property was that I
thought it would make it possible to allow requiring granular
compatibility of interface properties only for targets which
depended on the interface property. Eg:
add_library(foo ...)
add_library(bar ...)
add_executable(user ...)
# Read the INTERFACE_POSITION_INDEPENDENT_CODE from bar, but not
# from foo:
target_link_libraries(user foo $<$<TARGET_PROPERTY:POSTITION_INDEPENDENT_CODE>:bar>)
This obviously doesn't make sense. We require that INTERFACE
properties are consistent across all linked targets instead.
We need to make sure expressions which evaluate TARGET_PROPERTY:TYPE
multiple times for example get the correct result each time, and
not an empty string instead.
As INTERFACE_COMPILE_DEFINITIONS are now possible, we can have
situations like this:
add_library(foo ...)
add_library(bar ...)
target_link_libraries(foo bar)
target_compile_definitions(bar INTERFACE SOME_DEF)
The INTERFACE_COMPILE_DEFINITIONS of bar determine how foo should be
compiled, and if they change, foo should be rebuilt.
Additionally, as of commit d1446ca7 (Append the COMPILE_DEFINITIONS
from the Makefile to all targets., 2012-09-17), we don't need to
read definitions from the makefile if we read them from the target,
so also de-duplicate the cached info.
The DependInfo for INTERFACE_INCLUDE_DIRECTORIES is already handled
correctly.
Remove the old "nocwd" behavior that attempts to provide the "--help"
output when no working directory is available. The long help output
scrolls the real error message out of typical terminal sizes. Also
execute as little code as possible when no working directory exists.
Since commit 08cb4fa4 (Process generator expressions in the
INCLUDE_DIRECTORIES property., 2012-09-18), it is possible to use
generator expressions with the include_directories command.
As that command can also have a SYSTEM argument, ensure that the
result of using that argument with generator expressions gives a
sane result.
e48d842 Cache context-independent includes on evaluation.
089fe1c Optimize genex evaluation for includes and defines.
179f495 find_package: Reword <package>_NO_INTERFACES documentation
e7b579b Test workaround of bad interface include directories from depends.
77cecb7 Add includes and compile definitions with target_link_libraries.
0b92602 Add the $<LINKED:...> generator expression.
0fa7f69 Add API to check if we're reading a includes or defines property.
2c3654c Add a way to exclude INTERFACE properties from exported targets.
d4297d5 Export targets to a targets file, not a Config file.
df4d2b2 Make it an error for INSTALL_PREFIX to be evaluated.
7ceeba9 Advance more when preprocessing exported strings.
30268b4 Handle reading empty properties defined by the link interface.
The commit 18a3195a ('Keep track of INCLUDE_DIRECTORIES as a vector
of structs.', 2012-11-19) moved the handling of includes from
cmGeneratorTarget to cmTarget, but in the process introduced this
bug.
link.exe has problems with very very long lines in rsp files too.
Use $in_newline instead of $in variable for rspcontent which
separates the arguments with a newline instead of a simple space
and was specially made for this purpose.
Since commit d46d8df0 (Re-implemented cmGeneratedFileStream to look like a
real stream and replace the destination file atomically, 2004-11-03) our
RenameFile implementation tries to deal with MoveFile not replacing
read-only files. In order to avoid the Get/SetFileAttributes pair we used
stat to test for existence of the destination file. This has a race in
which the destination could be created between the test for existence and
the MoveFile call.
Remove the stat call and use GetFileAttributes to detect whether the file
exists. This shortens the race but does not eliminate it. Use a loop to
try multiple times in case we lose the race. While at it, drop Win9x
support and always use MoveFileEx.
Generator expressions whose output depends on the configuration
now record that fact. The GetIncludeDirectories method can use
that result to cache the include directories for later calls.
GetIncludeDirectories is called multiple times for a target
for each configuration, so this should restore performance for
multi-config generators.
While porting boost to use these features, the generation step took
too long (several minutes before I stopped it). The reason was that
the boost libraries form a large interdependent mesh. The libraries
list their dependencies in their INTERFACE such as:
$<LINKED:boost::core>;$<LINKED:boost::config>;$<LINKED:boost::mpl>
As boost::core already depends on the boost::config libraries, that
expression has no impact on the end-content, as it is removed after
the generation step. There is no DAG issue though, so the generator
expression evaluation would fully evaluate them. In the case of the
config library, it also depends on the core library, so all depends
are followed through that again, despite the fact that they've just
been evaluated. After this patch, the evaluation skips libraries if
they have already been seen via depends or directly in the content.
This patch keeps track of targets whose INTERFACE has been consumed
already. The INCLUDE_DIRECTORIES and COMPILE_DEFINITIONS properties
are whitelisted because repeated content will be stripped out later
during generation. For other properties now and in the future, that
may not be the case.
This establishes that linking is used to propagate usage-requirements
between targets in CMake code. The use of the target_link_libraries
command as the API for this is chosen because introducing a new command
would introduce confusion due to multiple commands which differ only in
a subtle way.
This is both a short form of using a TARGET_DEFINED expression
together with a TARGET_PROPERTY definition, and a way to strip
non-target content from interface properties when exporting.
Projects set interface requirements upstream, and existing
downstreams use of target_link_libraries will consume those interfaces.
This can create a backward compatibility concern as the result may
be changing the order of include directories of downstreams, or another
side-effect of using the INTERFACE properties.
Provide a way for them to emulate the behavior of a version-based
policy in the config file.
Both commit 8a37ebec (Add the target_include_directories command,
2013-01-01) and commit fc61a7a7 (Add the target_compile_definitions
command, 2013-01-08) added command implementations deriving from the new
cmTargetPropCommandBase class. Fix cmTypeMacro declarations of the
inheritance relationship.
7bf490e Make subclasses responsible for joining content.
f6b16d4 Don't allow targets args in the new target commands.
b3a7e19 Make the Property name protected so that subclasses can use it.
We need to make sure we can export targets which have content such
as $<0:$<TARGET_PROPERTY:not_a_target,INTERFACE_INCLUDE_DIRECTORIES>
That means making not finding a target non-fatal here.
Explain in the documentation for the legacy signature
target_link_libraries(foo bar)
that the other signatures like
target_link_libraries(foo LINK_INTERFACE_LIBRARIES ...)
target_link_libraries(foo LINK_PRIVATE ...)
will set the LINK_INTERFACE_LIBRARIES target property and therefore make
libraries specified only by the legacy signature private.
These interface-related link-libraries properties are used to determine
the value of the other INTERFACE properties, so we were getting infinite
recursion and segfaults otherwise.
6063fef Output include directories as LOG messages, not warnings.
aa66748 Specify the target whose includes are being listed.
d70204a Only output includes once after the start of 'generate-time' when debugging.
0d46e9a Store includes from the same include_directories call together.
830246e Export the COMPATIBLE_INTERFACE_BOOL content properties
bd82bb4 Clear the link information in ClearLinkMaps.
e987991 Make INTERFACE determined properties readable in generator expressions.
d9afacc Exit early if we find an inconsistent property.
1800f70 Populate the link information cache before checking dependent properties.
With similar reasoning to the parent commit, as downstreams, we can't
determine what $<CONFIG> generator expressions would be appropriate.
Upstream would have populated the INTERFACE_INCLUDE_DIRECTORIES with
config-specific generator expressions, possibly appropriate for
their DEBUG_CONFIGURATIONS. In theory, if we would add include
directories for a DEBUG intent, we would have to match the upstream
configurations for that.
Rather than attempting to discover the appropriate configurations
at this time, simplify the feature instead. The use of IMPORTED targets
with these commands could still be added in the future if targets
would export their DEBUG_CONFIGURATIONS somehow.
This reverts commit 9cfe4f1b76.
It turns out that correctly adding the content to
the IMPORTED_LINK_INTERFACE_LIBARIES_<CONFIG> of an upstream target
from the buildsystem of a downstream project is not simple.
If upstream had added the INTERFACE content, the config-specific
properties would be determined by the DEBUG_CONFIGURATIONS of
upstream.
As downstream, we don't have any information about what
the DEBUG_CONFIGURATIONS of upstream were, so we can't determine
which configuration-specific properties to populate. The best we can do
is add it to all of them or add it to the ones downstream considers to
be DEBUG_CONFIGURATIONS, neither of which is a good solution.
So, removing the porcelain API for that is the best approach. A human
can still determine which properties to populate and use
the set_property API to populate the desired properies.
Another solution to this would be for upstream targets to publish
what they consider DEBUG_CONFIGURATIONS, but that can be added in
a future release.
During configure-time, GetIncludeDirectories may be called too, for example
if using the export() command. As the content can be different, it should
be output each time then.
Otherwise, we get a separate IncludeDirectoriesEntry for each include,
and that causes unnecessary and confusing splitting in the output when
debugging the INCLUDE_DIRECTORIES property.
The cache here needs to be cleared if GetLinkInformation is called
at configure-time, such as during an export().
The next commit does exactly that, and without this patch,
the LinkLanguage test would fail.
It is not necessary and the current state is unintentional. Before
this patch,
target_link_libraries(foo bar)
causes the LINK_LIBRARIES property of foo to contain
$<TARGET_NAME:bar>
instead of just
bar
This new expression allows checking how a policy was set when a target
was created. That information is only recorded for a subset of policies,
so a whitelist is used.
1d74ba2 Test evaluation target via export for generator expressions
522bdac Export the INTERFACE_PIC property.
4ee872c Make the BUILD_INTERFACE of export()ed targets work.
1d47cd9 Add a test for the interfaces in targets exported from the build tree.
6c828f9 Move the exported check for file existence.
cfd4f0a Move the exported check for dependencies of targets
d8fe1fc Only generate one check per missing target.
f623d37 Don't write a comment in the export file without the code.
b279f2b Strip consecutive semicolons when preprocessing genex strings.
Don't add generator expressions to variables which are used
for CMP0003, CMP0004, and the old-style _LIB_DEPENDS content. They
will not be evaluated when read anyway and would probably confuse
the code reading them.
This makes it legitimate to use target_link_libraries with generator
expressions as arguments.
77d2646 Allow generator expressions in LINK_INTERFACE_LIBRARIES.
94aeaf7 Split LINK_INTERFACE_LIBRARIES export handling into dedicated method.
a3aedb8 Split the generator expression before extracting targets.
b6036d1 Extract the AddTargetNamespace method.
cb1afbf Don't pass a position when determining if a target name is a literal.
f99196d Add cmGeneratorExpression::Split() API.
In the implementation of "cmake -E cmake_link_script", skip lines from
the input file that are empty or contain only whitespace. Do not try to
run a child with no command line.
The Config and IMPORTED_ variants may also contain generator
expressions.
If 'the implementation is the interface', then the result of
evaluating the expressions at generate time is used to populate
the IMPORTED_LINK_INTERFACE_LIBRARIES property.
1) In the case of non-static libraries, this is fine because the
user still has the option to populate the LINK_INTERFACE_LIBRARIES
with generator expressions if that is what is wanted.
2) In the case of static libraries, this prevents a footgun,
enforcing that the interface and the implementation are really
the same.
Otherwise, the LINK_LIBRARIES could contain a generator
expression which is evaluated with a different context at build
time, and when used as an imported target. That would mean that the
result of evaluating the INTERFACE_LINK_LIBRARIES property for
a static library would not necessarily be the 'link implementation'.
For example:
add_library(libone STATIC libone.cpp)
add_library(libtwo STATIC libtwo.cpp)
add_library(libthree STATIC libthree.cpp)
target_link_libraries(libtwo
$<$<STREQUAL:$<TARGET_PROPERTY:TYPE>,STATIC_LIBRARY>:libone>)
target_link_libraries(libthree libtwo)
If the LINK_LIBRARIES content was simply copied to the
IMPORTED_LINK_INTERFACE_LIBRARIES, then libthree links to libone, but
executables linking to libthree will not link to libone.
3) As the 'implementation is the interface' concept is to be
deprecated in the future anyway, this should be fine.
Now that we're processing a LINK_INTERFACE_LIBRARIES string, it
can contain targets. Make sure they are extracted for
namespacing purposes.
This needs to be restricted to strings which can actually have
targets named in them. For example, this is not done for
INTERFACE_COMPILE_DEFINITIONS, because even if there is a target
named 'foo', the string 'foo' in that property means that '-Dfoo'
will be set when compiling.
3581b96 Process the INTERFACE_PIC property from linked dependencies
042ecf0 Add API to calculate link-interface-dependent bool properties or error.
bf5ece5 Keep track of properties used to determine linker libraries.
0380f36 FindOpenGL: add Haiku paths
8e9630c FindGLUT: BeOS does not have libXi and libXmu
50bfedf FindLua51: do not try to link libm on BeOS
3d2e6a0 check for Haiku only with __HAIKU__
7a1b961 Haiku no longer defines __BEOS__
ed96d9a bootstrap: use better defaults for Haiku
This allows a dependee to inform a target that it should have its
POSITION_INDEPENDENT_CODE property set to ON, or OFF. The value of
the POSITION_INDEPENDENT_CODE property, if set, must be consistent
with any INTERFACE_POSITION_INDEPENDENT_CODE properties on dependees.
Add a test covering the consistency checks on platforms where they run.
This new method checks that the property FOO on a target is consistent
with the INTERFACE_FOO properties of its dependees. If they are not the
consistent, an error is reported. 'Consistent' means that iff the
property is set, it must have the same boolean value as all other
related properties.
This makes
set(CMAKE_BUILD_INTERFACE_INCLUDES ON)
add the equivalent of
set_property(TARGET tgt APPEND PROPERTY
INTERFACE_INCLUDE_DIRECTORIES
$<BUILD_INTERFACE:${CMAKE_CURRENT_SOURCE_DIR};${CMAKE_CURRENT_BINARY_DIR}>
)
to every target.
If the headers are in CMAKE_CURRENT_SOURCE_DIR, and the generated headers
are in CMAKE_CURRENT_BINARY_DIR, this is a convenient way to build a target
bar, which depends on foo, just by using target_link_libraries() and adding
the INTERFACE_INCLUDE_DIRECTORIES to the INCLUDE_DIRECTORIES of the target
being linked. There will be more-convenient porcelain API to consume the
property in the future.
This makes it possible to use:
target_link_libraries(foo LINK_INTERFACE_LIBRARIES bar)
where foo is an IMPORTED target. Other tll() signatures are not
allowed.
Previously we kept direct link dependencies in OriginalLinkLibraries.
The property exposes the information in the CMake language through the
get/set_property commands. We preserve the OriginalLinkLibraries value
internally to support old APIs like that for CMP0003's OLD behavior, but
the property is now authoritative. This follows up from commit d5cf644a
(Split link information processing into two steps, 2012-11-01).
This will be used later to populate the link interface properties when
exporting targets, and will later allow use of generator expressions
when linking to libraries with target_link_libraries.
Also make targets depend on the (config-specific) union of dependencies.
CMake now allows linking to dependencies or not depending on the config.
However, generated build systems are not all capable of processing
config-specific dependencies, so the targets depend on the union of
dependencies for all configs.
The 'head' is the dependent target to be linked with the current target.
It will be used to evaluate generator expressions with proper handling
of mapped configurations and is used as the source target of properties.
This requires that memoization is done with a key of a pair of target
and config, instead of just config, because now the result also depends
on the target. Removing the memoization entirely is not an option
because it slows cmake down considerably.
cc676c3 OS X: Detect implicit linker framework search paths
2dd67c7 OS X: Detect implicit link directories on modern toolchains
ba58d0c OS X: Link with all framework search paths, not just the last
894f52f Handle INTERFACE properties transitively for includes and defines.
f5b1980 Populate the ExportedTargets member early in GenerateMainFile
c67b812 Make cycles in target properties ignored, not an error.
d0f950f Use mapped config properties to evaluate $<CONFIG>
26def17 Make all relevant targets available in the genex context.
0c657dc Add API to populate INTERFACE properties in exported targets.
e04f737 Add API to extract target names from a genex string.
b0c8f73 Add the TARGET_NAME generator expression.
77475fe Allow generator expressions to require literals.
b2f1700 GenEx: Add expressions to specify build- or install-only values
Since commit 9a6ff950 (Fix for bug where VS2010 did not use .obj files as
part of the build, 2011-04-01) and commit b291d9e7 (VS10: Fix external
objects generated outside target, 2012-03-19) we try to detect whether an
external object file is also a custom command output in the same target.
This is because VS10 includes .obj custom command outputs on the link line
by default.
VS 11 supports a "<LinkObjects ...>false</LinkObjects>" setting in custom
command rules to tell VS not to link the outputs. From the VS help:
Specify whether the Inputs and output files with specific extensions (.obj,
.lib, .res, .rsc) are passed to the linker.
Treat all external object files the same and add "<Object>" settings for them.
The member variable is checked to determine whether to call
HandleMissingTarget(). As that could be called during the loop in
the comming commits, ensure that it contains all targets being
exported.
Constructs such as these are an error as they are direct self-references:
set_property(TARGET foo APPEND PROPERTY
INCLUDE_DIRECTORIES $<TARGET_PROPERTY:foo,INCLUDE_DIRECTORIES>)
set_property(TARGET foo APPEND PROPERTY
INCLUDE_DIRECTORIES $<TARGET_PROPERTY:INCLUDE_DIRECTORIES>)
However, this is an indirect self-reference in a cycle, and not an error:
set_property(TARGET foo APPEND PROPERTY
INCLUDE_DIRECTORIES $<TARGET_PROPERTY:bar,INCLUDE_DIRECTORIES>)
set_property(TARGET bar APPEND PROPERTY
INCLUDE_DIRECTORIES $<TARGET_PROPERTY:foo,INCLUDE_DIRECTORIES>)
The TARGET_NAME expression, which requires a literal, provides
target names. $<TARGET_PROPERTY:tgt,prop> also provides target
names in the cases where tgt is a literal, so that TARGET_NAME is
not needed then in addition.
This is for specifying INCLUDE_DIRECTORIES relevant to the build-location
or the install location for example:
set_property(TARGET foo PROPERTY
INTERFACE_INCLUDE_DIRECTORIES
"$<BUILD_INTERFACE:${CMAKE_CURRENT_BINARY_DIR};${CMAKE_CURRENT_SOURCE_DIR}>"
"$<INSTALL_INTERFACE:${CMAKE_INSTALL_PREFIX}/include>"
)
A 'bar' target can then use:
set_property(TARGET bar PROPERTY
INCLUDE_DIRECTORIES
"$<TARGET_PROPERTY:foo,INTERFACE_INCLUDE_DIRECTORIES>"
)
and it will work whether foo is in the same project, or an imported target
from an installation location, or an imported target from a build location
generated by the export() command.
Because the generator expressions are only evaluated at build-time, these
new expressions are equivalent to the ZeroNode and OneNode.
The GeneratorExpression test is split into parts. Some shells can't run
the custom command as it is getting too long.
Xcode and VS <= 7.1 will not build targets that have no source files
besides $<TARGET_OBJECTS:...>. Suggest in the documentation that
projects always add at least one real source file.
0941d62 Add a way to print the origins of used include directories.
18a3195 Keep track of INCLUDE_DIRECTORIES as a vector of structs.
76ea420 Use cmsys::auto_ptr to manage cmCompiledGeneratorExpressions
Note it is still possible for CTest to start more than the number of
processes specified by PARALLEL_LEVEL, but this prevents the number of
tests to start from being unbounded because of overflow.
Previously we hard-coded a list of implicit framework directories but
did not account for CMAKE_OSX_SYSROOT or for changes to the list across
OS X versions. Instead we should automatically detect the framework
directories for the active toolchain.
The parent commit added the "-Wl,-v" option to ask "ld" to print its
implicit directories. It displays a block such as:
Framework search paths:
/...
Parse this block to extract the list of framework directories.
Detection may fail on toolchains that do not list their framework
directories, such as older OS X linkers. Always treat the paths
<sdk>/Library/Frameworks
<sdk>/System/Library/Frameworks
<sdk>/Network/Library/Frameworks # Older OS X only
/System/Library/Frameworks
as implicit. Note that /System/Library/Frameworks should always be
considered implicit so that frameworks CMake finds there will not
override the SDK copies.
Refactoring in commit 8d674e78 (Ninja: move -LIBPATH behind -link
option, 2012-09-26) accidentally added code that overwrites the
framework search path flags on each iteration instead of appending.
Change '=' to '+=' to fix it. This affects Makefile and Ninja
generators.
Extend documentation for CMAKE_<LANG>_IMPLICIT_LINK_DIRECTORIES to
explain how it is used by CMake and how it can be influenced by
environment variables.
Inspired-by: Alex Neundorf <neundorf@kde.org>
f0d9385 Makefile: Use modern link information for framework search paths
2bc22bd Xcode: Add frameworks search paths from link dependeny closure (#13397)
Use cmComputeLinkInformation::GetFrameworkPaths to get the list of
framework paths needed by the linker. Drop the now unused framework
information from the old-style cmTarget link dependency analysis.
This should finally fix#13667 and #13762.
Instead of adding special handling to guess whether implicit include dirs
may have been removed, simply make it possible to query the include dirs
without removing the implicit ones.
Alex
The Xcode generator produces FRAMEWORK_SEARCH_PATHS from:
(1) Include directories of the form /path/to/Foo.framework become
-F/path/to so '#include <Foo/H>' can find H in the framework.
(2) Linked frameworks of the form /path/to/Foo.framework become
-F/path/to -framework Foo so the linker can find the framework.
Originally commit 82bb6fae (add framework support to FIND_FILE,
2005-12-27) added these and used the (then current) old-style link
dependency analysis results to get the frameworks. Later a second
setting was added by commit 2ed6191f (add initial xcode framework stuff,
2007-05-08) to transform -F/path/to linker options produced by the old
link line generation into entries appended to FRAMEWORK_SEARCH_PATHS.
Then commit 96fd5909 (Implement linking with paths to library files,
2008-01-22) updated the second setting to directly use the results of
full modern link dependency analysis, but forgot to remove the use of
old-style link results from the original setting location.
The two settings worked together for a while, with the second one
appending to the first. Then commit f33a27ab (Generate native Xcode 3.0
and 3.1 projects, 2009-06-29) changed the internal representation format
produced by the first setting but did not update the second setting to
append to the new representation. As a result, if the first setting
added any paths (usually via the old-style link analysis) then the
second setting containing the modern link analysis results would not be
applied at all.
Fix this by removing use of the old-style link analysis results.
Replace it using the modern link dependencies and remove the second
setting altogether. Now all values for FRAMEWORK_SEARCH_PATHS are
collected in one place so no special append logic is needed.
Historically CMake has always expanded ${} variable references in the
values given to include_directories(), link_directories(), and
link_libraries(). This has been unnecessary since general ${}
evaluation syntax was added to the language a LONG time ago, but has
remained for compatibility with VERY early CMake versions.
For a long time the re-expansion was a lightweight operation because it
was only processed once at the directory level and the fast-path of
cmMakefile::ExpandVariablesInString was usually taken because values did
not have any '$' in them. Then commit d899eb71 (Call
ExpandVariablesInString for each target's INCLUDE_DIRECTORIES,
2012-02-22) made the operation a bit heavier because the expansion is
now needed on a per-target basis. In the future we will support
generator expressions in INCLUDE_DIRECTORIES with $<> syntax, so the
fast-path in cmMakefile::ExpandVariablesInString will no longer be taken
and re-expansion will be very expensive.
Add policy CMP0019 to skip the re-expansion altogether in NEW behavior.
In OLD behavior perform the expansion but improve the fast-path
heuristic to match ${} but not $<>. If the policy is not set then warn
if expansion actually does anything. We expect this to be encountered
very rarely in practice.
Eliminate the platform difference in calling stat. We call stat normally
in other places in the CMake code base just fine. Works everywhere we
work. Will hopefully also fix the Borland Continuous dashboard failure
that is occurring with respect to correctly measuring the modification
time of a freshly generated file.
...revealed by the Nightly dashboard runs last night.
Use "size_t" instead of "std::size_t" so that it compiles with
Visual Studio 6, too.
Fix warnings about shadowed "tmp" local variable and ordering of
member variables vs. lines of code in the constructor initializer
list.
Solution folders are supported as read-only in the VS11 Express
Edition, so do not prohibit their use just because we detect the
express edition (as we did in the VS10 generator).
Inspired-by: Paris
Use same technique here with UuidToString as already found in
cmGlobalVisualStudio7Generator::CreateGUID to avoid using a type
that is not defined on older systems... (VS 7.0 and Borland)
This new CPack generator produces an *.msi installer file.
Requires having the WiX Toolset installed in order to work
properly.
Download the WiX Toolset installer "WiX36.exe" here:
http://wix.codeplex.com/releases/view/93929
Previously it was necessary for writers of Config files
which incude exported target files to write the guard themselves, but
this was not immediately obvious or documented. Options for them
would be to use a variable, or an INHERITED directory property in an
effort to avoid accidental name clashes in all contexts in
which find_package can be used.
Getting this right requires boiler plate code, so generate a simpler
check automatically instead.
3a1006e VS: Added "Deploy" at project configuration for WindowsCE targets
40c36c9 VS: Make DetermineCompilerId working with WinCE too
038df9e VS: Allow setting the name of the target platform
6fe4fcb VS: Add parser for WCE.VCPlatform.config to read WinCE platforms
2118a20 VS: Support setting correct subsystem and entry point for WinCE
6920fed VS: Change variable type of Name from const char* to string
102521b VS: Change variable type of ArchitectureId from const char* to string
332dc09 VS: Add static method to get the base of the registry
d41d4d3 VS: Add CMAKE_VS_PLATFORM_NAME definition to cmMakefile
14861f8 VS: Remove TargetMachine for linker when checking compiler id
0bbae6f Revert "Move GetLinkInformation to cmGeneratorTarget"
d5cf644 Split link information processing into two steps.
d8a59ea Port cmGeneratorExpression to cmTarget from cmGeneratorTarget.
Add a dummy mainCRTStartup() function, since the linker searches for
it instead of main() and set the CMAKE_SYSTEM_* variables depending
on the MSVC_C_ARCHITECTURE_ID and CMAKE_VS_WINCE_VERSION variables.
Parse the WCE.VCPlatform.config file, which contains the installed
WindowsCE SDKs in XML format, and add possibility to generate
Visual Studio generators for them.
Implement support for multiarch include directories as specified here:
https://wiki.ubuntu.com/MultiarchCross
Generalize the multiarch feature added in commit b41ad3b3 (Teach
find_(library|package) about Linux multiarch, 2011-06-08) to the
find_path and find_file commands. Teach them to search
<prefix>/include/<arch> whenever they would search <prefix>/include.
When adding more platforms to the Visual Studio generators a simple
regular expressing can not handle all cases anymore. This new
define holds the name of the Visual Studio target platform.
The sublimeclang_options_script property is now set in the project
file. It is set to execute a python script that reads the JSON options
file to get options per source file. Python must be installed and in the
path for this feature to work from Sublime Text.
add_custom_command can have empty DEPENDS arguments, which
was triggering invalid makefile generation for the NMake
Makefiles generator. We were mistakenly emitting the build
directory appended with "/" plus the empty string... which
was then translated to a string ending in \" in build.make...
which nmake choked on.
The solution is not to emit any dependency when the input
DEPENDS is the empty string. Return early from GetRealDependency
in this empty input case.
This is for consistency throughout cmake. The cmsys version exists
becaues uses of auto_ptr types as return types does not work with
some implementations in ancient compilers.
Following from the discussion here:
http://thread.gmane.org/gmane.comp.programming.tools.cmake.devel/3615/focus=5170
(Re: Generator expressisons in target properties, 26 Oct 12:10)
we can't split cmTarget API for linking into cmGeneratorTarget. In
the future we will probably also need to move the include and compile
definitions API back to cmTarget so that it can be used by export().
75ebebc VS: Remove platform specific generator files
8b62080 VS: Remove EnableLanguage from platform-specific generators
5bdf011 VS: Remove GetPlatformName from platform-specific generators
8d42ab4 VS: Fix ArchitectureId of Visual Studio 10 IA64 generator
6f439b3 VS: Remove AddPlatformDefinitions from platform-specific generators
5170a88 Make cmGlobalGenerator::GetDocumentation() a static function
04ff866 Allow a GeneratorFactory handling of more than one generator
984ebc3 Search generator in cmake::ExtraGenerators before in cmake::Generators
30a6950 Add cmGlobalGeneratorFactory::GetGenerators()
e8f8414 Introduce the abstract class cmGlobalGeneratorFactory
On some systems, ${QT_INCLUDE_DIR} is reported by gcc as a builtin
include search dir. Some projects use this information to extend
CMAKE_CXX_IMPLICIT_INCLUDE_DIRECTORIES.
In cmake 2.8.10 now the targets are queried for the include directories
they use. When they return the result, the include dirs contained in
CMAKE_CXX_IMPLICIT_INCLUDE_DIRECTORIES have been removed.
In cmake 2.8.9 and below the INCLUDE_DIRECTORIES directory property
was queried, where this had not been stripped.
So, in those projects which modify the implicit include dirs variable,
on systems where ${QT_INCLUDE_DIR} is reported by gcc, this directory,
e.g. /usr/lib/include/qt/, was not given anymore to moc. This made moc
not find required headers, so the build broke.
Simply giving the full CMAKE_CXX_IMPLICIT_INCLUDE_DIRECTORIES to moc
is no solution either, since moc can't handle some of the headers it
finds then (https://bugreports.qt-project.org/browse/QTBUG-28045).
So now cmake checks CMAKE_CXX_IMPLICIT_INCLUDE_DIRECTORIES, and if this
contains ${QT_INCLUDE_DIR}, and the target reports that it uses
${QT_QTCORE_INCLUDE_DIR} but not ${QT_INCLUDE_DIR}, ${QT_INCLUDE_DIR}
is added to the include dirs given to moc.
Alex
Pass the name of the requested generator to the generator factory,
which is now responsible to check if it can create a matching
generator for the name. This allows us to add more logic to the
factory in a next step, so that not every possible generator needs
to get registered explicit in cmake::AddDefaultGenerators().
Since ExtraGenerators does not contain items, which are in Generators
too, there is not change in behaviour. The benefit of this change is,
that the lookup in the Generators map is now only done once.
Since commit ca39c5cd (Optionally allow IMPORTED targets to be globally
visible, 2012-01-25) cmGlobalGenerator has a second member that tracks
targets with global scope. We must initialize the new 'ImportedTargets'
member wherever the old 'TotalTargets' member is initialized. Without
this initialization the ImportedTargets member is left with dangling
pointers during a same-process re-configuration.
This patch sets the FOLDER target property for the automoc target
to the same value as of the actual target. This organizes the targets
in IDEs with folders better.
Inspired-by: Mike Gelfand
Alex
737534c Remove references to ancient and removed parts of the code.
21e8a08 Resolve ambiguity warning regarding use of && and ||.
5f6432f Resolve warnings about shadowing parameters and local variables.
9f16d42 Resolve warnings about used enum values in switch blocks.
bd8bdb6 Resolve warnings about unused variables.
Change test if DEL key is allowed from 'curcol > 0' to 'curcol >= 0', as
deleting forward is reasonable in the first column (and probably
expected by users to work).
Support for DEL was first added in commit b3b43508 (BUG: fix for 6462,
delete key should delete the current char, 2008-08-19). The commit
appears to have copied the original logic from the backspace code so the
old 'curcol > 0' logic was accidental rather than intentional.
This is not ambiguous to the compiler, but it may seem ambiguous to
the reader.
From reading 3a53005f (Build object library targets in VS), 5484550a
(Detect and set Unicode character set in VS 10), and 9e01aefd (VS:
Add support for WinRT project properties (#12930)), this appears to
be the intentional semantic.
We no longer write sublimeclang_options to the project file, but instead
write a separate .sublimeclang-options JSON file that contains a map
of source file paths to compile flags for that file.
- file(WRITE): add configure_file() decoupling hint
- function(): definitely mention PARENT_SCOPE
- include_directories(): mention possible results of SYSTEM setting
- macro(): mention scope specifics of function()
- message(): improve SEND_ERROR / FATAL_ERROR docs, since people said it's not obvious
This command works only when building projects using the same
architecture as the running CMake binary. Since it was introduced
CMake has learned macro() and function() to add commands, and the
execute_process() command to launch advanced external computations.
Add a RunCMake.load_command test to verify the warning appears.
828d4f5 Add several get_property() tests
82106e3 GetProperty test: move doc property tests into main process
56125a3 list: add tests for CMP0007 behavior
48ed48f Add test to secure the file(GLOB empty) behavior.
c2a6cb6 file: remove dead code
07251a8 Consolidate list() argument count testing
1b078c3 Add tests for list() invalid arguments
f560977 Add tests for list() argument count
d211e5d CMakeTests: allow to call the check_cmake_test macro with a given file
The code handling IMPLICIT_DEPENDS was only able to track a single file,
the latest file replaced earlier files in the list.
The documentation now mentions that the language has to be prefixed to
every file and the test now uses two implicit dependencies, where only
the second is modified to trigger re-running of the custom command.
Alex
Inspired-by: Michael Wild <themiwi@users.sourceforge.net>
Some dependency-generators (such as cmDependsFortran) generate multiple
entries per depender, so erasing the dependency vector for each depender
found loses earlier dependencies.
Signed-off-by: Michael Wild <themiwi@users.sourceforge.net>
This patch is heavily inspired by Michael Wild.
The interfaces cmDepends::Write and cmDepends::WriteDependencies where
extended to allow multiple dependees (sources) per depender (object).
cmDepends::Write first collect all dependencies into a std::set before
passing it to cmDepends::WriteDependencies.
cmDependsC::WriteDependencies also first collects all explicit and
implicit dependencies into a std::set and only then writes
depend.{internal,make}. The implementation of cmDependsFortran simply
loops over all sources and proceeds as before, whereas the cmDependsJava
implementation is as trivial as before.
This is for preventing exponential growth of depend.{internal,make} in
the next commit which fixes dependency-vector erasure in
cmDepends::CheckDependencies.
Inspired-by: Michael Wild <themiwi@users.sourceforge.net>
This is intentionally a separate commit, so the parent commit which
changes the logic is small and not mixed with formatting (indentation)
changes. So, this patch here does not change any logic.
Alex
Since CMake 2.8.7 no src-path entry was generated anymore, in response to
http://www.cmake.org/Bug/view.php?id=12213
Before that a src-path entry was added for each linked resource.
Now only one src-path entry is added, for the ${CMAKE_SOURCE_DIR}.
According to
http://www.cmake.org/Bug/view.php?id=13596
this makes the indexer behave better.
Alex
Both define and include flags from CMAKE_C(XX)_FLAGS are now included in
SublimeClang options.
Include directories are now used with absolute paths instead of relative
paths since CMake generated build trees cannot be moved anyway.
This patch reduces a bit code duplication by changing the way how the
case that we already have valid dependencies for a file is handled.
Instead of having the code for writing the depend-files twice,
we now fill the existing dependencies into the same set and then
write it out once at the end of cmDependsC::WriteDependencies()
Alex
Inspired-by: Michael Wild <themiwi@users.sourceforge.net>
The ComputePDBOutputDir added by commit 3f60dbf1 (Add
PDB_OUTPUT_DIRECTORY and PDB_NAME target properties, 2012-09-25) falls
back to the current binary directory instead of the target output
directory as before. When no PDB_OUTPUT_DIRECTORY property is set we
instead should fall back to the target output directory where .pdb files
used to go before the new property was added.
The file command requires at least two arguments, so guarding the GLOB and
MAKE_DIRECTORY command is not necessary. Changed it for an assert to keep the
protection.
66759ee find_library: Optionally consider all names in each directory
9cb68b1 find_library: Generalize helper macro in test case
b64dd76 find_library: Simplify framework search logic
531c71b find_library: Refactor internal name iteration
Previously, setting CPACK_POSTFLIGHT_SCRIPT had no effect in
component mode, when CPACK_COMPONENTS_ALL was set.
In component mode, a .mpkg is created that contains multiple .pkg's.
Because postflight scripts only work in a .pkg, add another .pkg to the
.mpkg and put the postflight script in that.
This is the same approach taken by the PackageMaker GUI when adding
a postflight script to a metapackage.
Fix the VS 10 link flag map to name the project file entries correctly.
The VS 11 link flag map already has the correct names. Generate the
entries in the <PropertyGroup> along with incremental linking options.
Drop them from the <Link> element because VS does not use them.
Avoid collecting the link options twice. Collect them once in a
LinkOptions member and use it from both places. We already do this for
compiler options with the ClOptions member.
...in generated sub-directory sln files.
Thanks to rlandert for the bug report and proposed patch.
The method WriteTargetsToSolution gets called possibly multiple times,
once per sln file, (-> once per "project" command).
Before accumulating folder names in VisualStudioFolders, clear it
first, so it doesn't have stale entries in it from the previous
sln file.
The path must be either absolute or relative to the working directory
from which the makefile will be loaded. In subprojects this is not
relative to the top of the build tree.
Reported-by: David Weese <tre@gmx.de>
e386992 GexEx: Validate Target names and property names differently.
95d590d GenEx: Create cmGeneratorTargets for imported targets.
0442104 GenEx: Add an accessor for imported targets in a makefile.
We're going to need to link to them, and all the linking API is moving
to cmGeneratorTarget.
Skip imported targets when iterating over cmGeneratorTargets in places
where we only want targets we build. The GetGeneratorTargets result now
includes IMPORTED targets where it didn't before. The GetTargets
result, which was what used to be called in these methods does not
include IMPORTED targets. This doesn't relate to any known bugs, but in
some future uses of GetGeneratorTargets it will be important, so
starting the convention and being deliberate now is a good idea.
Changed the the SublimeText2 generator name to Sublime Text 2.
Fixed a minor issue where if the build directory was outside of the source
directory an unnecessary folder_exclude_pattern was generated in the
Sublime Text 2 project file.
Eclipse may get confused by these linked resources, because it sees
the same source file multiple times then and doesn't recognize
that it's the same file actually.
Alex
79edd00 GenEx: Fix reporting about not-found include directories and libraries.
f7ef32b GenEx: Replace some failing tests with Borland and NMake makefiles.
fd59b10 GenEx: Add some more asserts to verify code-sanity.
6dd2b36 GenEx: Break if there are no more commas in the container
e7230c7 GenEx: Fix termination bugs in generator expression parser.
145a4af GenEx: Test the use of generator expressions to generate lists.
e2d141d GenEx: Parse colon after arguments separator colon specially.
995a35f CTest: add a check with a quoted memory checker
de8bffc CTest: add a test for CTEST_CUSTOM_MEMCHECK_IGNORE
d26c9b6 CTest: improve memory checker type detection
fcae1da CTest: add tests that simulate memcheck runs
6187876 CTest: fix pre and post test commands with spaces
95bc8aa CTest: fix usage of memory checker with spaces in path
Commit 08cb4fa4 (Process generator expressions in the
INCLUDE_DIRECTORIES property, 2012-09-18) contained an incorrect
assumption that CMAKE_BUILD_TYPE was set on the makefile for each
generated configuration in multi-config generators. Fix that by making
the GetIncludeDirectories API depend on the config.
This fixes a regression introduced in commit 290e92ad (Move
GetIncludeDirectories to cmGeneratorTarget, 2012-09-16) which loops over
cmGeneratorTargets before they get created, so the container is empty.
Content which is incomplete as a generator expression could cause
segfaults by advancing an iterator beyond end() and dereferencing
it. Such incomplete generator expressions should be treated as
plain text instead.
The rationale is similar to that in commit b3d8f5da (GenEx: Parse comma
after colon tokens specially, 2012-10-04), in that colon tokens should
not be parsed as identifier-argument delimiters after the first colon.
Now automoc always uses GetRealPath() so symbolic links are always
resolved and it doesn't end up with twice the same file, once with the real
path and once with the symlinked path in some setups where the source dir
can be accessed directly and via a symlink
Alex
If the CMAKE_SUBLIMECLANG_DISABLED variable is on then SublimeClang
is disabled in the generated project file. This is useful in large
projects where SublimeClang might run slowly or perform poorly.
This adds -I include path flags and -D define flags for sublimeclang.
The current problem with this is that these flags cannot be set per
target (build_system in sublime text), it can only be set project
wide. Currently all of the include paths and compiler definitions from
ALL of the targets are used (with duplicates removed). This could be
problematic in some cases (conflicting compiler definitions among targets).
The generator adds all list and source files for each defined
project. The generated project files also include build_system
entries that run the platform-specific make on the generated
Makefiles. A build_system entry is created for each target
that was defined in the CMakeLists.txt files.
At the moment this has only been tested with C/C++ projects.
7aa9927 GenEx: Don't use std::vector::at(int).
78e54b9 GenEx: Add tests for "0" and "1" expressions with literal commas.
d729e8b GenEx: Add test for $<BOOL:> with empty parameter.
354face GenEx: Ensure that the empty CONFIGURATION can be used conditionally.
8b3b88a GenEx: Validate target and property names.
b3d8f5d GenEx: Parse comma after colon tokens specially
a4985a9 GenEx: Report actual target name not found, not "0" each time.
d70650d GenEx: Return after error reported.
4801eb6 GenEx: It is not an error to specify an empty parameter
Otherwise the comma is treated as plain text by ParseContent.
$<STREQUAL:,> should be valid and true.
$<STREQUAL:,something> should be valid and false.
$<STREQUAL:,,> should be non-valid as it is 3 parameters.
$<STREQUAL:something,,> should be non-valid as it is 3 parameters.
Additionally, this allows reporting the correct error for other
expressions. For example $<TARGET_PROPERTY:,> should be invalid
because it has an empty target and empty property. It shouldn't
attempt to read the property ',' on the 'implicit this' target.
If the checker was explicitely set with a "TypeCommand" variable (e.g.
ValgrindCommand) then we now just believe that this is valgrind, even if
nothing in the path matches "valgrind". Only when "MemoryCheckCommand" was used
we still scan the path to find out what checker we have.
Hack access to cmCTestVC::Revision on this compiler to avoid errors like
Source/CTest/cmCTestSVN.cxx, line 23: Error: cmCTestSVN::SVNInfo is not accessible from cmCTestSVN::Revision.
Source/CTest/cmCTestSVN.cxx, line 22: Error: cmCTestVC::Revision is not accessible from file level.
1e47ccb Ninja: add option to enforce usage of response files
e31df03 Ninja: move <OBJECTS> in front of the first linker option
8d674e7 Ninja: move -LIBPATH behind -link option
In the response file also linker options could be passed,
and because <OBJECTS> is replaced by a response file, it
is necessary that no compiler option follows <OBJECTS>.
This reverts commit 5598d9b2a0.
Since commit f1670ab1 (Ninja: don't confuse ninja's rsp files with
nmake's, 2012-09-26) Ninja generator response files are placed in
CMakeFiles/ so the previously existing check already avoids expanding
them.
Rolf Eike Beer
Kitware Robot
Robert Maynard
Andreas Mohr
Brad King
Stephen Kelly
Jack O'Connor
Victor Zverovich
Alex Neundorf
Marc Bartholomaeus
Ian Monroe
Petr Kmoch
Paul Kunysch
Jean-Christophe Fillion-Robin
Peter Kümmel
Anton Helwart
Gerald Hofmann
Alexander Chehovsky
Mark Salisbury
Patrick Gansterer
Yury G. Kudryashov
Eric LaFranchi
David Cole
Casey Goodlett
Nils Gladitz
Mathias Gaunard
Morné Chamberlain
Clemens Heppner
David Golub
Matthew Woehlke
Michael Wild
Clinton Stimpson
Amine Chadly
Eric NOULARD
Bill Hoffman