Commit Graph

391 Commits

Author SHA1 Message Date
Brad King 508504ab6f Merge topic 'per-config-EXCLUDE_FROM_DEFAULT_BUILD'
739f166 Serialize tests for EXCLUDE_FROM_DEFAULT_BUILD
e31d83b Define property EXCLUDE_FROM_DEFAULT_BUILD
d1f8828 Add property EXCLUDE_FROM_DEFAULT_BUILD_<CONFIG>
b777272 Add tests for EXCLUDE_FROM_DEFAULT_BUILD
2012-11-20 11:47:35 -05:00
Brad King bd52ff3ac9 Merge topic 'only-git-fetch-when-necessary'
a41d3a4 ExternalProjectUpdateTest: Only support Git 1.6.5 and greater.
de760c1 ExternalProject: Verify when a fetch occurs during update test.
0a34433 ExternalProject: Make sure the ExternalProjectUpdate setup is available.
9b66c8f ExternalProject: Always do a git fetch for a remote ref.
2619f4d ExternalProject: Add tests for UPDATE_COMMAND.
378aa12 ExternalProject: Do smoke tests for Git Tutorial builds.
d075829 ExternalProject: Only run 'git fetch' when required.
2012-11-13 14:31:58 -05:00
Matt McCormick 0a34433dfb ExternalProject: Make sure the ExternalProjectUpdate setup is available.
This prepares the numberous tests that occur in the ExternalProjectUpdate
test.  The tests were passing previously because a fresh build was not performed.
2012-11-13 13:34:44 -05:00
Matt McCormick 2619f4d87a ExternalProject: Add tests for UPDATE_COMMAND.
Tests are added for UPDATE_COMMAND to ensure it is working properly.  Testing
infrastructure is added along with tests for Git, but tests for other version
control systems could easily be added in the future.
2012-11-13 13:34:22 -05:00
Brad King 739f16653d Serialize tests for EXCLUDE_FROM_DEFAULT_BUILD
The tests share a single build directory and so should not run in
parallel.  While at it, add the build dir to the test_clean target.
2012-11-13 10:52:05 -05:00
Petr Kmoch b777272b0b Add tests for EXCLUDE_FROM_DEFAULT_BUILD
Add tests for EXCLUDE_FROM_DEFAULT_BUILD and its per-configuration
variants.
2012-11-13 09:08:42 -05:00
Stephen Kelly 9be64f34c2 GenEx: Use case insensitive comparison for $<CONFIG:...>
This fixes a regression introduced by commit f1eacf0e
(cmGeneratorExpression: Re-write for multi-stage evaluation).
2012-11-05 08:49:25 -05:00
David Cole a2871e93ee Merge topic 'test-ctest-memcheck'
995a35f CTest: add a check with a quoted memory checker
de8bffc CTest: add a test for CTEST_CUSTOM_MEMCHECK_IGNORE
d26c9b6 CTest: improve memory checker type detection
fcae1da CTest: add tests that simulate memcheck runs
6187876 CTest: fix pre and post test commands with spaces
95bc8aa CTest: fix usage of memory checker with spaces in path
2012-10-17 16:43:02 -04:00
Rolf Eike Beer fcae1dacea CTest: add tests that simulate memcheck runs 2012-10-04 23:07:31 +02:00
Brad King 2ccca05fad Run PDBDirectoryAndName test on MSVC and Intel
Move it out of the condition that also accepts MinGW/MSYS.
Teach the test to allow the Intel for Windows compiler but
do not verify the results because the compiler does not
seem to write PDB output in all cases.
2012-09-29 07:17:42 -04:00
Yuchen Deng 3f60dbf148 Add PDB_OUTPUT_DIRECTORY and PDB_NAME target properties (#10830)
This enables changing the name and output folder of the debug symbol
files produced by MS compilers.

Inspired-by: Thomas Bernard <thomas.bernard@ipetronik.com>
2012-09-25 15:23:35 -04:00
David Cole 05784dadc5 Merge topic 'compile-definitions-unique'
f0a1065 Rename files from main.cpp to more meaningful names.
ca7fb14 Fix the test setting COMPILE_DEFINITIONS target property
733deb6 Fix CompileDefinitions test on Visual Studio.
3dae652 Don't duplicate -D defines sent to the compiler.
2012-08-24 14:24:24 -04:00
Stephen Kelly 3dae652b4e Don't duplicate -D defines sent to the compiler.
There is no need to do so. Be consistent with include directories and
ensure uniqueness.

This requires changing the API of the cmLocalGenerator::AppendDefines
method, and changing the generators to match.

The test unfortunately can't test for uniqueness, but it at least verifies
that nothing gets lost.
2012-08-20 22:30:11 +02:00
David Cole 407ccb4957 Merge topic 'RemoveNonworkingKDE4Test'
11f23fe remove non-working KDE4 test
2012-08-20 15:41:06 -04:00
David Cole 14c8096ba8 Merge topic 'more-endif-closing-style-cleanups'
84b49be Remove CMake multiline block-end command arguments
2012-08-20 15:39:26 -04:00
Alex Neundorf 11f23fee52 remove non-working KDE4 test
Alex
2012-08-16 23:28:52 +02:00
Marcin Wojdyr 84b49be8f0 Remove CMake multiline block-end command arguments
removing arguments omitted in 9db3116226
2012-08-15 16:50:29 -04:00
Brad King ebf05abda1 Add boolean generator expressions
Add generator expressions that combine and use boolean test results:

 $<0:...>         = empty string (ignores "...")
 $<1:...>         = content of "..."
 $<AND:?[,?]...>  = '1' if all '?' are '1', else '0'
 $<OR:?[,?]...>   = '0' if all '?' are '0', else '1'
 $<NOT:?>         = '0' if '?' is '1', else '1'

These will be useful to evaluate (future) boolean query expressions and
condition content on the results.  Include tests and documentation.
2012-08-15 11:44:49 -04:00
Brad King 3c0488d7d3 Fix WarnUnusedUnusedViaUnset test pass/fail regex
After conversion of Modules .cmake files to lower case the
FAIL_REGULAR_EXPRESSION for this test matched warnings in modules other
than the test line itself.  Make the pass and fail regular expressions
specific to the file containing the lines they are testing.
2012-08-14 08:06:19 -04:00
Kitware Robot 9db3116226 Remove CMake-language block-end command arguments
Ancient versions of CMake required else(), endif(), and similar block
termination commands to have arguments matching the command starting the
block.  This is no longer the preferred style.

Run the following shell code:

for c in else endif endforeach endfunction endmacro endwhile; do
    echo 's/\b'"$c"'\(\s*\)(.\+)/'"$c"'\1()/'
done >convert.sed &&
git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' |
egrep -z -v '^(Utilities/cm|Source/kwsys/)' |
egrep -z -v 'Tests/CMakeTests/While-Endwhile-' |
xargs -0 sed -i -f convert.sed &&
rm convert.sed
2012-08-13 14:19:16 -04:00
Kitware Robot 77543bde41 Convert CMake-language commands to lower case
Ancient CMake versions required upper-case commands.  Later command
names became case-insensitive.  Now the preferred style is lower-case.

Run the following shell code:

cmake --help-command-list |
grep -v "cmake version" |
while read c; do
    echo 's/\b'"$(echo $c | tr '[:lower:]' '[:upper:]')"'\(\s*\)(/'"$c"'\1(/g'
done >convert.sed &&
git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' |
egrep -z -v '^(Utilities/cm|Source/kwsys/)' |
xargs -0 sed -i -f convert.sed &&
rm convert.sed
2012-08-13 14:19:16 -04:00
David Cole a51e1529e7 Merge topic 'ninja-fix-macosx'
1fc8df9 Add missing this->.
7a3ecf5 Fix memory leak in Makefile generator.
9f7dc83 Ninja: also bootstrap ninja files
5d365b2 Ninja: enable ninja support everywhere
d569f3e Ninja: void function can't return a value
52160bf Ninja: enable ninja on Mac so all Mac CDash-builds are tested, cleanup later
56aeac6 Ninja: fixes for bcc
7a6bc9e Ninja: remove 'this' from member initializer list
44ba4cf Ninja: remove warnings
7751966 Ninja: remove 'friend' in ninja code
c3988ee Re-factor OS X content generator start up.
f8e0a51 Re-factor framework directory computation.
f36c7b0 Re-factor Mac OS X content directory computation.
5d885db Re-factor bundle content copying rules generation.
3b2a01e Ninja: Use same echo message as makefiles.
7bb56c5 Re-factor CFBundle generation.
...
2012-07-24 17:03:46 -04:00
David Cole c1bbdbff57 Merge topic 'DoNotInvokeCPackAtCMakeTime-forCMakeTests'
b47cffa CPack: Use bin subdir when looking for dpkg and rpmbuild
a8c659c Find dpkg and rpmbuild in usual Fink and MacPort paths
848f220 Do not run cpack at CMake time it is not available.
2012-07-24 17:03:37 -04:00
Nicolas Despres 03bdaf5453 Enable BundleTest with CLang too. 2012-07-17 14:03:09 +02:00
Eric NOULARD 848f2201c5 Do not run cpack at CMake time it is not available.
cpack was used to get the list of available i.e. ACTIVE CPack generators
in the CMake tests suite. This was done in order to get dynamically
available CPack generators like DEB or RPM that may or may not be
available on some platform like MacOSX depending on the fact that
some command are installed or not. We may do that but not during
initial configuration.
The current patch fixes the problem and we may do better in the future
like configuring CPack tests later.
2012-06-28 13:49:49 +02:00
David Cole 361696ae20 CTest: Add test to verify -D variable definitions work 2012-06-25 08:25:51 -04:00
David Cole c95d1baa19 Merge topic 'position-independent-targets'
bd34963 Refactor generation of shared library flags
55d7aa4 Add platform variable for flags specific to shared libraries
31d7a0f Add platform variables for position independent code flags
2012-06-12 16:01:04 -04:00
Stephen Kelly bd34963002 Refactor generation of shared library flags
CMAKE_SHARED_LIBRARY_<lang>_FLAGS has flags on various platforms for a
variety of purposes that are correlated with shared libraries but not
exclusive to them.  Refactor generation of these flags to use new
purpose-specific platform variables

  CMAKE_<lang>_COMPILE_OPTIONS_DLL
  CMAKE_<lang>_COMPILE_OPTIONS_PIC
  CMAKE_<lang>_COMPILE_OPTIONS_PIE

Activate the DLL flags specifically for shared libraries.  Add a new
POSITION_INDEPENDENT_CODE target property to activate PIC/PIE flags, and
default to true for shared libraries to preserve default behavior.
Initialize the new property from CMAKE_POSITION_INDEPENDENT_CODE to
allow easy global configuration in projects.

Although the default behavior is unchanged by this refactoring, the new
approach ignores CMAKE_SHARED_LIBRARY_<lang>_FLAGS completely.  We must
leave it set in case projects reference the value.  Furthermore, if a
project modifies CMAKE_SHARED_LIBRARY_<lang>_FLAGS it expects the new
value to be used.  Add policy CMP0018 to handle compatibility with
projects that modify this platform variable.

Add a PositionIndependentCode test on platforms where we can get
meaningful results.
2012-06-12 15:38:48 -04:00
Stephen Kelly 3545645c1b Exclude the CompileCommandOutput test on WIN32. 2012-06-05 00:12:16 +02:00
Stephen Kelly db839bec7d Make the CMAKE_EXPORT_COMPILE_COMMANDS option work with Ninja. 2012-06-04 23:42:37 +02:00
David Cole 3e23da0688 Merge topic 'CPack-activateRPM-DEB-onMacOS'
801ea70 Calm down Borland compiler warning about "always true"
2a34b57 CPack allow RPM and DEB generator to be used on OSX.
2012-05-24 13:38:13 -04:00
Eric NOULARD 2a34b57938 CPack allow RPM and DEB generator to be used on OSX.
More generally add the check for possible generator "activation" at
runtime depending on a generator specific check.
The dynamic behavior is currently implemented only for MacOS
and should be fully backward compatible for other system.

Inspired-By Tom Hughes <tomtheengineer@gmail.com>
2012-05-20 22:04:32 +02:00
Bill Hoffman b0c07a13d1 Disable bullseye coverage for mumps coverage test. 2012-05-04 11:41:15 -04:00
Bill Hoffman 220afcaf84 Use <TARGET_FILE> expression to run ctest so it works with Xcode and VS IDE.
Also add -crlf to the .gitconfig to handle the coverage data.
2012-05-02 11:51:38 -04:00
Bill Hoffman 62f6bce7a5 Use a script to run the test because WORKING_DIRECTORY is not in 2.8.2.
add_test with WORKING_DIRECTORY is too new to use in cmake.  This change
uses a configured script to run the command in the right directory.
2012-05-02 10:45:06 -04:00
Bill Hoffman 7955e995ec Add support for Cache coverage.
This adds support for Cache coverage parsing. A test is added
that does a basic run of the coverage on a small bit of data.
2012-05-01 17:00:43 -04:00
Bill Hoffman 319eeb0247 Add test for mumps coverage. Also refactor code to prepare for cache coverage.
Add a simple test to make sure the GTM mumps coverage is working.
Also refactor the code so that cache coverage can be added.
2012-05-01 13:35:07 -04:00
Brad King 2693dbe085 Merge branch 'object-library' into ninja-object-library 2012-03-16 10:20:20 -04:00
Brad King c68cc06612 Merge branch 'object-library' into ninja-object-library 2012-03-16 10:18:01 -04:00
Brad King 69d3d1835c Test OBJECT library success cases
Add "ObjectLibrary" test to build and use OBJECT libraries.  Build
multiple object libraries in separate directories with different flags.
Use a custom command to generate a source file in one OBJECT library.

Reference the OBJECT libraries for inclusion in a STATIC library, a
SHARED library, and an EXECUTABLE target.  Use the static and shared
libraries each in executables that end up using the object library
symbols.  Verify that object library symbols are exported from the
shared library.
2012-03-16 10:12:30 -04:00
Brad King 55b2aa884c Use generalized RunCMake test infrastrucure for build_command test
The CMakeCommands.build_command test performs output/error checking
so move it over to RunCMake to re-use the generalized infrastrucure.
This is the only test left using Tests/CMakeCommands/CMakeLists.txt
so remove it.
2012-03-12 09:33:21 -04:00
Brad King 42a81e7119 Add stronger infrastructure for CMake-only tests
The CMakeOnly directory added by commit 9a20abf0 (Add infrastructure for
CMake-only tests, 2012-01-11) was sufficient only for tests that always
run CMake to successfully configure a project.  Later commit eeaaffcb
(find_package: Test error and warning messages in failure cases,
2012-02-28) added a sample test that covers failure cases.

Generalize the above to create new "RunCMake" test infrastructure that
can run CMake multiple times for a single project with different
variations and check for expected result/stdout/stderr.  Allow for both
successful and failing CMake project configuration cases.  This will be
useful to test error messages and failure behavior.
2012-03-12 09:33:21 -04:00
David Cole f55119e63b Merge topic 'fix-12189-support-SBCS-in-VS'
b28e7fa VS6: Avoid SBCS test on VS6 (#12189)
df19b9c VS6: Avoid _MBCS define when _SBCS is defined (#12189)
ba89e92 Visual Studio: Allow setting Single Byte Character Set (#12189)
2012-03-08 15:14:03 -05:00
David Cole b28e7fa174 VS6: Avoid SBCS test on VS6 (#12189)
The previous commit, df19b9ca, assumed that the corresponding
_UNICODE functionality in the VS6 generator actually worked.
That turns out not to be the case. Unicode definition does not
actually suppress _MBCS definition, so neither does this new
code...

Don't test it here, since the patch submitter for _SBCS does
not need VS6 support.

If somebody needs _UNICODE and _SBCS support to suppress the
definition of _MBCS in the VS6 generator, it is work yet to do.
Patches welcome.
2012-03-06 18:45:51 -05:00
David Cole b22f2f18c1 Merge topic 'qt4-deploy'
4689eed reflect that the QtAutomoc depends on QtGui
ab9661c Remove QtGui dependency in Qt4Deploy test and verify QtSql existance.
52e8279 Fix for Qt4Deploy on some test machines.
672e3bb Add test for DeployQt4.cmake
4853e1e Fix plugin installation issues.
35cbf23 Ensure libs are passed to BundleUtilities.
0ac1535 Fix bad plugin paths.
a2123e8 Fix mismatched arguments.
fc6f340 Don't use QT_LIBRARIES_PLUGINS by default.
2012-03-06 15:25:02 -05:00
David Cole a1860aaf1a Merge topic 'test-CMakeCommands'
5e1a5c4 Add infrastructure for CMakeCommands tests
2012-03-02 11:48:22 -05:00
Rolf Eike Beer 4689eedcc0 reflect that the QtAutomoc depends on QtGui 2012-02-29 21:35:20 +01:00
Clinton Stimpson ab9661c1dd Remove QtGui dependency in Qt4Deploy test and verify QtSql existance. 2012-02-29 07:55:31 -07:00
Brad King 5e1a5c44da Add infrastructure for CMakeCommands tests
Generalize the build_command test framework as a macro to add the
test.  Process the CMakeCommands subdirectory explicitly.
2012-02-28 11:34:10 -05:00
Modestas Vainius f5cf8f9897 Tests: Escape metachars before embedding paths into the regex (#12999)
${CMake_SOURCE_DIR} and ${CMake_BINARY_DIR} cannot be embedded into regex
directly. If they contain special regex metacharacters like +, the regex
will break. So just escape such metacharacters with a backslash before
embedding the path into the regex.

The issue affected the following tests: CTestTestConfigFileInBuildDir1 and
CTestTestConfigFileInBuildDir2.
2012-02-27 09:01:10 -05:00