Narrow down the decision if a CFBundle is built to one place.
This is a preparation patch to add another target property
which, if set, will imply BUNDLE. Having only one function
which will have to look at both properties helps to keep code
clean.
Signed-off-by: Gregor Jasny <gjasny@googlemail.com>
Also add a 'CMAKE_ANDROID_API_MIN' variable to set the property
default. Teach the VS generator to write the MIN API value into
Nsight Tegra project files.
In cmCTestMemCheckHandler::PostProcessBoundsCheckerTest return early
if the output file name is empty. We already do this in the similar
cmCTestMemCheckHandler::AppendMemTesterOutput method.
When install(EXPORT) is given an absolute destination we cannot compute
the install prefix relative to the installed export file location.
Previously we disallowed installation of targets in such exports with a
relative destination, but did not enforce this for target property
values besides the location of the main target file. This could lead to
broken installations when the EXPORT is installed to an absolute path
but usage requirements are specified relative to the install prefix.
Since an EXPORT installed to an absolute destination cannot be relocated
we can just hard-code the value of CMAKE_INSTALL_PREFIX as the base for
relative paths. This will allow absolute install(EXPORT) destinations
to work with relative destinations for targets and usage requirements.
Extend the ExportImport test with a case covering this behavior.
A few pieces of code have some ambiguous type deduction that seems to
resolve correctly for most compilers but not for the Oracle compiler.
This makes those few instances more explicit.
In the unlikely event that someone has a billion+ scripts (or some
codepath returns negative numbers), we could overflow and make a pile of
errors a non-error. This change also allows us to use flags for the
error in the future rather than just "something went wrong".
We use cmGlobalGenerator::GetDirectoryContent to avoid repeating
directory listings. However, GetDirectoryContent loads content from
disk at most once. This breaks find_library calls that occur when disk
content has changed since preceding find_library calls.
Teach cmGlobalGenerator::GetDirectoryContent to save the directory
modification time when content is loaded and re-load content if it
changes.
Create a RunCMake.find_library test with a case covering this.
Given a rule of the form
out1 out2: dep1
out1 out2: dep2
Borland Make complains that there are multiple rules for "out1"
even though this works when there is only one output. Instead
generate
out1 out2: dep1 dep2
for Borland Make, but only when there are multiple outputs.
Convert the StringToInt helper into a StringToLong helper with a 'long'
result type. This will make the helper more useful to other callers
that want to use strtol.
While at it, also check errno after calling strtol in case the
conversion fails with a range error.
Because ctest reads in binary but writes in text mode, Windows' newline
transformation can be applied multiple times causing '\n' in the source
application to be written out as '\r\r\n' instead.
Fix the generated makefiles for custom commands with multiple outputs to
list all the outputs on the left hand side of the build rule. This is
much simpler and more reliable than the old multiple-output-pair
infrastructure.
The Xcode generator uses Makefiles under a run-script build-phase to
drive custom commands. Fix the generated makefiles for custom commands
with multiple outputs to list all the outputs on the left hand side of
the build rule. This is much simpler and more reliable than the old
multiple-output-pair infrastructure.
If a source file COMPILE_FLAGS option adds "-wd", the .vcxproj file
will have a DisableSpecificWarnings setting for the source file.
Add to the setting a reference to %(DisableSpecificWarnings) to
inherit any such flags set for the whole target.
Copy CMAKE_EXE_LINKER_FLAGS into the test project generated by
try_compile, just like we already copy CMAKE_<LANG>_FLAGS.
Add CMake Policy CMP0056 to activate this behavior in a compatible way,
but do not warn by default when the policy is not set since it will
affect all try_compile calls.
Extend the RunCMake.try_compile test with a case covering this behavior
for each policy setting.
When compiling the ABI detection test project, do not override
CMAKE_EXE_LINKER_FLAGS completely. The normally selected value of this
variable may influence how the link is done and may be needed to be
representative of how the calling project will be built. Instead pass a
variable that try_compile will reference as additional flags. Leave
this behavior of try_compile undocumented for now.
With PushScope and PopScope, keeping track of another bit of data for
each scope isn't easy. Instead, store it as another CMake variable so it
gets implicitly tracked along with everything else.
This works in a revert of commit
7d674b5f0b.
Provide options to fail without blocking or to block up to a timeout.
Provide options to specify the scope containing the lock so it can be
released automatically at the end of a function, file, or process.
Extend the RunCMake.file test with cases covering the file(LOCK) command
usage and error cases.
Add a VS_DEPLOYMENT_LOCATION source file property to specify where to
put files that are part of the package. For example:
set_property(SOURCE ${ASSET_FILES} PROPERTY VS_DEPLOYMENT_LOCATION "assets")
Without this, sources marked with VS_DEPLOYMENT_CONTENT cannot be
located properly.
Create properties VS_SHADER_ENTRYPOINT and VS_SHADER_MODEL. Without
these many .hlsl source files may not be possible to use. Extend the
VSWinStorePhone test project to cover them.
When _UNICODE is defined VS uses wmain instead of main as the entry function.
To make this correctly work on WindowsCE EntryPointSymbol needs to be set to
mainWCRTStartup instead of mainACRTStartup for console applications and to
wWinMainCRTStartup instead of WinMainCRTStartup for GUI applications.
Signed-off-by: Pascal Bach <pascal.bach@siemens.com>
When checking target types for TARGET_SUPPORTS_SHARED_LIBS == false,
enumerate exactly the library types not supported rather than trying to
maintain a list of all the types that are supported. Otherwise
add_library(SomeImportedLib UNKNOWN IMPORTED)
warns on platforms that do not support shared libraries.
Reported-by: Kelly Thompson <kgt@lanl.gov>
Since commit v3.1.0-rc1~821^2 (Windows: Use response files to specify
link libraries for GNU tools, 2014-03-04) we use a response file to pass
possibly long linker flag lists to the GNU linker on Windows. On MinGW,
this may cause gfortran to use a response file to pass some flags to its
own internal invocation. This is okay except when we are parsing
implicit link flags from the compiler ABI detection build. If gfortran
uses a response file in that case then we may miss extracting some of
the implicit link flags, such as -lgfortran. Fortunately, in the
compiler ABI detection case we do not actually link to anything so the
response file is empty. Work around this problem by simply not using a
response file when the list of flags it is used to pass is empty (or
just whitespace).
Reported-by: Bill Somerville <bill@classdesign.com>
8a75c7ef Help: Document the export limitation of INTERFACE_SOURCES.
e1348056 Export: Disallow export of targets with INTERFACE_SOURCES
bb5905bb cmTarget: Don't allow relative paths in INTERFACE_SOURCES
808c77e2 Merge branch 'revert-cached-regex-clear' into revert-cached-regex-clear-for-master
7d674b5f Revert "ClearMatches: Only clear matches which were actually set" (#15261)
This can be allowed in the next release, but it needs to have some
features present and tested such as
* Ensuring that relative paths do not appear in the generated property.
* Ensuring that paths to the source or build directories do not appear.
* Generating a check in the file for CMake 3.1 or later so that the
resulting property will be consumed.
* Ensuring that any referenced targets are part of an export set and
generating a check for them.
* INSTALL_INTERFACE and BUILD_INTERFACE content.
All of these checks are already done for INTERFACE_INCLUDE_DIRECTORIES,
but it is too late to add them for INTERFACE_SOURCES for CMake 3.1.
As the checks introduce some new error conditions, it is better to
disallow exporting fully for this case and introduce proper error
conditions later instead of policies.
Follow the pattern of checks that are made for INTERFACE_INCLUDE_DIRECTORIES.
Existence is already checked by cmSourceFile::GetFullPath. Add a check
to disallow relative paths in source directories. Otherwise code such as
target_sources(lib1 INTERFACE foo.cpp)
would fail if consumed by a target in a different directory.
Unlike the INTERFACE_INCLUDE_DIRECTORIES behavior, we don't care whether
the entry comes from an IMPORTED target or not. In the include directories
case, the directory for a non-imported target might not exist yet but
might be created. In the sources case, a file which does not yet
exist in the filesystem must be explicitly marked with the GENERATED
property.
Adjust existing tests and add a new test for the error.
Since commit v3.1.0-rc1~688^2~15 (cmTarget: Add a method to obtain list of
filenames for sources, 2014-03-17) we have code paths that lookup sources by
strings containing their own full path after normalization to the actual case
on disk. This fails in the case that a cmSourceFile has already been created
with a different case in the filename. The comparison of the directory works
because it is always normalized. Only the comparison of the file name fails.
Fix this by using a case-insensitive comparison of source file names on
platforms that do not have case-sensitive filesystems.
Extract a new method to encapsulate the requirements of evaluating
dependent-expressions, namely, propagation of the
EvaluateForBuildsystem setting, which is missing from the
getLinkedTargetsContent implementation.
Commit v3.1.0-rc1~688^2 (Genex: Only evaluate TARGET_OBJECTS to determine
target sources., 2014-03-20) introduced an error case for use of
TARGET_OBJECTS outside of the context of generating the buildsystem,
as the path to object files may be dependent on buildsystem
variables (See bug #15226).
Commit v3.1.0-rc1~314^2 (Allow INTERFACE_SOURCES to specify
$<TARGET_OBJECTS> (#14970), 2014-07-09) made it possible to
propagate such content to dependent targets.
While that commit propagated the EvaluateForBuildsystem setting
for the case of a TARGET_PROPERTY expression, as generated for
direct dependencies of a target in
cmTargetInternals::AddInterfaceEntries, it did not add propagation
for content from further transitive target dependencies, as determined
by getLinkedTargetsContent.
This reverts commit v3.1.0-rc1~557^2~2 (ClearMatches: Only clear matches
which were actually set, 2014-03-12). The optimization did not track
the match count in the same scope as the variables, allowing possible
inconsistency.
Resolve conflicts in Source/cmIfCommand.cxx, Source/cmMakefile.cxx,
and Source/cmMakefile.h by moving the changes to the new location
of the code involved.
It gets incremented while entering a loop block (e.g. foreach or while)
and gets decremented when leaving the block. Because scope borders for
example at function borders must be taken into account the counter is
put into a stack. With every new scope an empty counter is pushed on the
stack, when leaving the scope the original value is restored.
This will allow easy querying if the break command is properly nested
within a loop scope.
Signed-off-by: Gregor Jasny <gjasny@googlemail.com>
7a687292 ccmake: Cleanup and simplify conditional blocks for HP-UX
44f02b42 ccmake: Use standard getmaxyx instead of non-standard getmax[xy]
ee3d06a4 ccmake: Remove incomplete support for cur_colr on old HP-UX
This commit fixes a bug where it was impossible to specify
/INCREMENTAL to Fortran projects built with Visual Studio.
The problem was due to the fact that .vfproj files expect
the value of this flag to be "linkIncremental{No,Yes},
whereas .vcproj files expect this value to be 0, 1, or 2.
The implementation of this fix adds a new data structure for
Visual Studio linker flags specific to Fortran. This can
easily be extended in the future if more such discrepencies
between C/C++ and Fortran linking are discovered.
Re-run if the input file changes or if the output file is removed.
This only works with the Makefile generators currently. The limitation
of the Ninja generator is tracked as issue #15256. The IDE
generators will need larger refactoring as they currently rely on
being able to determine the depends and output files at the start of
generate-time, which is too early for the file(GENERATE) case.
67bd514a Ninja: Refactor restat to be a string internally
ef42e57d Ninja: Use a TARGET_FILE variable to hold the link output file
592644c4 Tests/BuildDepends: Drop unneeded help for Ninja
2d75d7e5 Help: Add notes for topic 'console-pool'
f42d86f0 Ninja: Implement USES_TERMINAL using the console pool if available
f281ae01 Ninja: Remove unused declaration
d5eae556 Ninja: factor out the test for console pool support
4d1fedf4 Give the interactive cache editor the USES_TERMINAL property
fe5d6e8c Add USES_TERMINAL option for custom commands
ad6ee426 Rename doing_verbatim to doing_nothing
Brad King
Kitware Robot
Sean McBride
Gregor Jasny
Dmitry Polyanitsa
Joseph Snyder
Chuck Atkins
Ben Boeckel
Ruslan Baratov
Gilles Khouzam
Cedric Perthuis
Pascal Bach
Stephen Kelly
Ådne Hovda
Zack Galbreath