Organize the documentation into subsections to separate the signatures.
Refactor the discussion of allowed link items into bullet points and
expand into more detail on each.
3af13782 Help: Update discussion of relocable packages in cmake-packages(7)
227992c3 Help: Reorganize and refine discussion of relocatable packages
031d894f Help: Place relocatable package notes in their own subsections
6e331ce9 Help: Fix typo in cmake-packages(7) manual
ba9b9d79 Help: Fix syntax in non-relocatable usage requirements example
These notes apply only for the use case of creating a package for
redistribution on machines other than that where it is built. Clarify
this to readers by placing the discussion in dedicated sections titled
accordingly.
Much of the information in the old set() command documentation is now
covered in the cmake-language(7) manual. Rewrite the documentation
with this in mind. Split up the signatures for each kind of variable
into different subsections.
Revert commit v3.0.0-rc1~175^2~20 (add_dependencies: Disallow use with
INTERFACE_LIBRARY, 2013-12-25). Teach our dependency analysis to
transitively follow INTERFACE target utility dependencies as was done or
IMPORTED targets in commit v2.8.6~127^2~1 (Allow add_dependencies() on
imported targets, 2010-11-19). Extend the InterfaceLibrary test with a
case to cover header generation for a header-only INTERFACE library via
a custom target.
GLOB lists directories by default and GLOB_RECURSE does not.
LIST_DIRECTORIES enables user to control the behavior explicitly for
consistently for both GLOB and GLOB_RECURSE.
The find_package command already knows how to compute installation
prefixes from PATH. Use the same approach to establish prefixes for
find_library, find_file, and find_path to use to look in directories
like "<prefix>/lib[/<arch>]" and "<prefix>/include" for libraries and
headers. This will reduce the amount of configuration end users need to
do to establish a work environment rooted under a specific prefix.
This will allow per-config destinations for targets in EXPORT sets.
Using multiple install(TARGETS) with separate CONFIGURATIONS is
rejected as a target appearing more than once in an export set.
Now instead one can write
install(TARGETS foo EXPORT exp DESTINATION lib/$<CONFIG>)
to get a single logical membership of the target in the export set
while still having a per-config destination.
d0adcccb try_run: Add tests for LINK_LIBRARIES with mock libraries.
223c5cb7 try_run: Add test for bad link libraries.
e2b1f058 try_run: Add support for LINK_LIBRARIES option.
Most functionality is already implemented in Source/cmCoreTryCompile.{h,cxx}.
Document and improve argument parsing.
This functionality is already being used by a number of modules, like
CheckCSourceCompiles.cmake, but it is not documented.
The command has been documented as 'deprecated', but it is not really
slated for removal and can still be used. Clarify this in the
documentation. While at it, revise the documentation to use wording
more consistent with that now in target_link_libraries.
Suggested-by: Christoph Grüninger <foss@grueninger.de>
This adds support for the new cdash API where arbitrary files can be
uploaded to the CDash server. This CDash API communicates via json
files so the json parser jsoncpp was added to the Utilities directory.
In commit v3.1.0-rc1~484^2 (Help: Format and revise file() command
documentation, 2014-05-23) the signature of file(GENERATE) was
accidentally simplified too much and dropped specification of the
required argument ordering. Restore the signature to make the order
clear.
Provide options to fail without blocking or to block up to a timeout.
Provide options to specify the scope containing the lock so it can be
released automatically at the end of a function, file, or process.
Extend the RunCMake.file test with cases covering the file(LOCK) command
usage and error cases.
8a75c7ef Help: Document the export limitation of INTERFACE_SOURCES.
e1348056 Export: Disallow export of targets with INTERFACE_SOURCES
bb5905bb cmTarget: Don't allow relative paths in INTERFACE_SOURCES
Since commit v3.1.0-rc1~479^2~1 (Add an "installed file" property
scope, 2014-05-15) the get_property and set_property commands
support an 'INSTALL' scope. Add documentation for this scope.
bb1111ea Help: Warn that paths should not be used in INTERFACE_ build properties.
96691d12 Help: Fix typo in genex in documentation.
f8f02451 Help: Use a property-specific command instead of the generic one.
8609a884 Help: Make remaining build property docs consistent.
bcface39 Help: Link to target_link_libraries from target properies.
e12926e7 Help: Format the LINK_INTERFACE_LIBRARIES target properies.
c8540e94 Help: Unify the help text of INTERFACE_ build properties.
Since commit v2.8.11~227^2~1 (Don't allow targets args in the new target
commands, 2013-01-29) the target_include_directories command does not
support target names on the right hand side, but that commit forgot to
remove it from the docs. It was never released with such support.
Update the command documentation now.
2d75d7e5 Help: Add notes for topic 'console-pool'
f42d86f0 Ninja: Implement USES_TERMINAL using the console pool if available
f281ae01 Ninja: Remove unused declaration
d5eae556 Ninja: factor out the test for console pool support
4d1fedf4 Give the interactive cache editor the USES_TERMINAL property
fe5d6e8c Add USES_TERMINAL option for custom commands
ad6ee426 Rename doing_verbatim to doing_nothing
A common idiom in CMake-based build systems is to have custom commands
that generate files not listed explicitly as outputs so that these
files do not have to be newer than the inputs. The file modification
times of such "byproducts" are updated only when their content changes.
Then other build rules can depend on the byproducts explicitly so that
their dependents rebuild when the content of the original byproducts
really does change.
This "undeclared byproduct" approach is necessary for Makefile, VS, and
Xcode build tools because if a byproduct were listed as an output of a
rule then the rule would always rerun when the input is newer than the
byproduct but the byproduct may never be updated.
Ninja solves this problem by offering a 'restat' feature to check
whether an output was really modified after running a rule and tracking
the fact that it is up to date separately from its timestamp. However,
Ninja also stats all dependencies up front and will only restat files
that are listed as outputs of rules with the 'restat' option enabled.
Therefore an undeclared byproduct that does not exist at the start of
the build will be considered missing and the build will fail even if
other dependencies would cause the byproduct to be available before its
dependents build.
CMake works around this limitation by adding 'phony' build rules for
custom command dependencies in the build tree that do not have any
explicit specification of what produces them. This is not optimal
because it prevents Ninja from reporting an error when an input to a
rule really is missing. A better approach is to allow projects to
explicitly specify the byproducts of their custom commands so that no
phony rules are needed for them. In order to work with the non-Ninja
generators, the byproducts must be known separately from the outputs.
Add a new "BYPRODUCTS" option to the add_custom_command and
add_custom_target commands to specify byproducts explicitly. Teach the
Ninja generator to specify byproducts as outputs of the custom commands.
In the case of POST_BUILD, PRE_LINK, and PRE_BUILD events on targets
that link, the byproducts must be specified as outputs of the link rule
that runs the commands. Activate 'restat' for such rules so that Ninja
knows it needs to check the byproducts, but not for link rules that have
no byproducts.
Teach the add_custom_command and add_custom_target commands a new
USES_TERMINAL option. Use it to tell the generator to give the command
direct access to the terminal if possible.
Format the reStructuredText markup manually. Organize the command
options into a definition list. Use inline markup to cross-reference
related documents.
string SUBSTRING command now ignores length if it points
past end of string and uses end of string instead.
String SUBSTRING tests now cover more corner cases.
When we explain in add_definitions documentation that it is intended
only for preprocessor definitions, link to add_compile_options for
adding other flags. Also explicitly mention that the order of
add_definitions calls with respect to target creation does not matter.
This differs from the behavior now explicitly stated in the
documentation of add_compile_options.
Explain that it affects only targets added after the call. Fix the link
to the COMPILE_OPTIONS directory propert documentation. Update the
latter to explain that it is used to initialize the corresponding target
property when a target is created.
858d5a0b Fix if() checks of CMAKE_SYSTEM_NAME on Cygwin
e177e7af FPHSA: Avoid if() dereferencing of quoted variable
425acc52 cmcurl: Use if(DEFINED) to simplify conditions
cede5cbd libarchive: Avoid depending on if() to dereference a quoted variable
2d97178b FindGTK2: Avoid depending on if() to dereference a quoted variable
0b12815d Modules/Test*.cmake: Use if(DEFINED) to simplify conditions
188a1f23 If: Introduce policy CMP0054 - don't dereference quoted variables in if()
b900c1cc If: Extract cmConditionEvaluator from if() implementation
Explain that try_compile calls need to be protected with conditions to
avoid running more than once so that it is easy to isolate a single
try_compile to perform with --debug-trycompile.
5bf1c5cc Help: Document add_custom_command PRE_BUILD/PRE_LINK for exe/lib only (#15059)
2a58c872 Help: Revise and format 'add_custom_command' docs
cb88742d Help: Remove stray content from 'add_custom_command' docs
State explicitly that the PRE_LINK mode is not for targets created by
the add_custom_target command. The existing wording for PRE_BUILD being
treated as PRE_LINK by non-VS generators will now imply this restriction
for PRE_BUILD too.
Format the reStructuredText markup manually. Organize the command
options into a definition list. Use inline markup to cross-reference
related documents.
Loosen this restriction on OBJECT libraries to allow source files of any
name to be generated by custom commands or listed for reference in IDE
projects so long as they would not affect linking of a normal library.
Update the rejection message to be more specific about the looser
restriction.
Extend the ObjectLibrary test to cover a ".cmake" file generated by a
custom command in an OBJECT library.
Installing large directories, e.g., the output of a doxygen run, prints
one line per file resulting in too much noise in the build output. Add
an option to the install(DIRECTORY) command to not print anything upon
make install.
Extend the RunCMake.install test with cases covering MESSAGE_NEVER
behavior of the install(DIRECTORY) command.
Suggested-by: Stefan Eilemann <Stefan.Eilemann@epfl.ch>
Create a variable to allow users to control which installation
messages are printed. In particular, provide a "LAZY" setting
that prints "Installing" messages but not "Up-to-date" messages.
This is desirable for incremental re-installations.
Suggested-by: J Decker <d3ck0r@gmail.com>
The add_library(INTERFACE) and Interface Libraries documentation
list all the INTERFACE_* properties and target_* commands that
can be used to define the interface. Add INTERFACE_SOURCES
and target_sources() to these lists for completeness.
In the ctest(1) manual and ctest_start() command documentation, convert
mentions of CTest Script variables to cross-references so they will be
rendered as links.
This is the convention suggested in the Sphinx documentation and is
already used in several other places in the CMake documentation.
Update a few places where we were using other characters.
Explain how to use $<BUILD_INTERFACE> and $<INSTALL_INTERFACE> directly
in the documentation of the target_include_directories command and
INTERFACE_INCLUDE_DIRECTORIES target property. Otherwise readers need
to notice the link to the cmake-buildsystem(7) manual and find the
example in that to understand the need for these expressions.
Also fix the explanation in cmake-buildsystem(7) to not claim that
relative paths may be used inside a BUILD_INTERFACE expression.
Note in a few places of the cmake_policy() command documentation
that the cmake_minimum_required() command can set policies too.
Inspired-by: Peter Kümmel <syntheticpp@gmx.net>
Link to it from the documentation of related properties, variables
and commands.
Extend the cmake-developer(7) documentation with notes on
extending feature support for compilers.
Organize the documentation by sub-command to keep the signatures and
their descriptions nearby. Use inline and explicit reST markup. Revise
wording as necessary for the updated layout. Clarify behavior of the
file(GENERATE) command w.r.t. conflicting file names.
Add properties and variables corresponding to CXX equivalents.
Add features for c_function_prototypes (C90), c_restrict (C99),
c_variadic_macros (C99) and c_static_assert (C11). This feature
set can be extended later.
Add a <PREFIX>_RESTRICT symbol define to WriteCompilerDetectionHeader
to conditionally represent the c_restrict feature.
When a project is packaged for redistribution the local package
registries should not be updated or consulted. They are for developers.
Add variables to disable use of package registries globally:
* CMAKE_EXPORT_NO_PACKAGE_REGISTRY that disables the export(PACKAGE)
command
* CMAKE_FIND_PACKAGE_NO_PACKAGE_REGISTRY that disables the User Package
Registry in all the find_package calls.
* CMAKE_FIND_PACKAGE_NO_SYSTEM_PACKAGE_REGISTRY that disables the
System Package Registry in all the find_package calls.
Update documentation and unit tests.
This can be used to set the compiler features required by particular
targets. An error is issued at CMake time if the compiler does not
support the required feature. If a language dialect flag is required
by the features used, that will be added automatically.
Base the target_compile_features command on cmTargetPropCommandBase. This
gives us 'free' handling of IMPORTED, ALIAS, INTERFACE, non-compilable
and missing targets.
Remove use of UseObjectLibraries from Makefile and Ninja generators. It
is not needed now because those generators use GetExternalObjects
which already contains the objects from object libraries.
The VS10 generator calls both the UseObjectLibraries and the GetExternalObjects
methods. Ensure that duplicates are not created by skipping objects
from object libraries in handling of GetExternalObjects.
Similarly, fix VS6, VS7 and Xcode object handling by skipping
external objects from OBJECT_LIBRARY usage as appropriate.
The error message in the BadSourceExpression1 test is now reported
by the generator expression evaluator, so it has different text.
Rely on evaluation in cmCustomCommandGenerator for the generators.
When tracing target dependencies, depend on the union of dependencies
for all configurations.
Recently used cmake-gui locations are searched only on Windows because
the Windows registry is used to record the values. This behavior is
historical and may be removed by a policy in the future so rather than
implementing it on other platforms simply document the current behavior.
This command does not support generator expressions. The documentation
was mistakenly extended to claim it in commit v3.0.0-rc1~60^2~3 (Help: Mark
up the buildsystem commands documentation, 2014-02-03).
6e89c8a5 install: Support generator expressions in FILES and PROGRAMS mode
f11f7b34 cmInstallFilesGenerator: Add reference to calling cmMakefile
e190236c Help: Format install() command documentation
Teach the install(FILES) and install(PROGRAMS) commands to evaluate
generator expressions in the list of files.
Extend the ExportImport test to cover installation cases involving
generator expressions.
Brad King
Domen Vrankar
Daniele E. Domenichelli
Zack Galbreath
Stephen Kelly
Justin Borodinsky
Matt McCormick
Bill Hoffman
Gregor Jasny
Ben Boeckel
Ruslan Baratov
Nils Gladitz
Peter Collingbourne
Andrew Bauer
Alan W. Irwin
Clinton Stimpson
Rolf Eike Beer