CMake/Modules/FindSDL_sound.cmake

# - Locates the SDL_sound library
# This module depends on SDL being found and 
# must be called AFTER FindSDL.cmake is called.
#
# This module defines
# SDL_SOUND_INCLUDE_DIR, where to find SDL_sound.h
# SDL_SOUND_FOUND, if false, do not try to link to SDL
# SDL_SOUND_LIBRARIES, this contains the list of libraries that you need 
# to link against. This is a read-only variable and is marked INTERNAL.
# SDL_SOUND_EXTRAS, this is an optional variable for you to add your own
# flags to SDL_SOUND_LIBRARIES. This is prepended to SDL_SOUND_LIBRARIES.
# This is available mostly for cases this module failed to anticipate for
# and you must add additional flags. This is marked as ADVANCED.
#
# This module also defines (but you shouldn't need to use directly)
# SDL_SOUND_LIBRARY, the name of just the SDL_sound library you would link
# against. Use SDL_SOUND_LIBRARIES for you link instructions and not this one.
# And might define the following as needed
#  MIKMOD_LIBRARY
#  MODPLUG_LIBRARY
#  OGG_LIBRARY
#  VORBIS_LIBRARY
#  SMPEG_LIBRARY
#  FLAC_LIBRARY
#  SPEEX_LIBRARY
#
# Typically, you should not use these variables directly, and you should use
# SDL_SOUND_LIBRARIES which contains SDL_SOUND_LIBRARY and the other audio
# libraries (if needed) to successfully compile on your system .
#
# Created by Eric Wing. 
#
# This module is a bit more complicated than the other FindSDL* family
# modules.  The reason is that SDL_sound can be compiled in a large variety
# of different ways which are independent of platform. SDL_sound may
# dynamically link against other 3rd party libraries to get additional codec
# support, such as Ogg Vorbis, SMPEG, ModPlug, MikMod, FLAC, Speex, and
# potentially others.  Under some circumstances which I don't fully
# understand, there seems to be a requirement that dependent libraries of
# libraries you use must also be explicitly linked against in order to
# successfully compile. SDL_sound does not currently have any system in place
# to know how it was compiled.  So this CMake module does the hard work in
# trying to discover which 3rd party libraries are required for building (if
# any).
#
# This module uses a brute force approach to create a test program that uses
# SDL_sound, and then tries to build it. If the build fails, it parses the
# error output for known symbol names to figure out which libraries are
# needed.  Responds to the $SDLDIR and $SDLSOUNDDIR environmental variable
# that would correspond to the ./configure --prefix=$SDLDIR used in building
# SDL.
#
# On OSX, this will prefer the Framework version (if found) over others.
# People will have to manually change the cache values of 
# SDL_LIBRARY to override this selection.
#


SET(SDL_SOUND_EXTRAS "" CACHE STRING "SDL_sound extra flags")
MARK_AS_ADVANCED(SDL_SOUND_EXTRAS)

# Find SDL_sound.h
FIND_PATH(SDL_SOUND_INCLUDE_DIR SDL_sound.h
  $ENV{SDLSOUNDDIR}/include
  $ENV{SDLDIR}/include
  ~/Library/Frameworks/SDL_sound.framework/Headers
  /Library/Frameworks/SDL_sound.framework/Headers # OS X
  /usr/local/include/SDL
  /usr/include/SDL
  /usr/local/include/SDL12
  /usr/local/include/SDL11 # FreeBSD ports
  /usr/include/SDL12
  /usr/include/SDL11
  /usr/local/include
  /usr/include
  /sw/include/SDL # Fink
  /sw/include
  /opt/local/include/SDL # DarwinPorts
  /opt/local/include
  /opt/csw/include/SDL # Blastwave
  /opt/csw/include 
  /opt/include/SDL
  /opt/include
  )
# Find the SDL_sound library
IF(${SDL_SOUND_INCLUDE_DIR} MATCHES ".framework")
  # Extract the path the framework resides in so we can use it for the -F flag
  STRING(REGEX REPLACE "(.*)/.*\\.framework/.*" "\\1" SDL_SOUND_FRAMEWORK_PATH_TMP ${SDL_SOUND_INCLUDE_DIR})
  IF("${SDL_SOUND_FRAMEWORK_PATH_TMP}" STREQUAL "/Library/Frameworks"
      OR "${SDL_SOUND_FRAMEWORK_PATH_TMP}" STREQUAL "/System/Library/Frameworks"
      )
    # String is in default search path, don't need to use -F
    SET (SDL_SOUND_LIBRARY "-framework SDL_sound" CACHE STRING "SDL_sound framework for OSX")
  ELSE("${SDL_SOUND_FRAMEWORK_PATH_TMP}" STREQUAL "/Library/Frameworks"
      OR "${SDL_SOUND_FRAMEWORK_PATH_TMP}" STREQUAL "/System/Library/Frameworks"
      )
    # String is not /Library/Frameworks, need to use -F
    SET(SDL_SOUND_LIBRARY "-F${SDL_SOUND_FRAMEWORK_PATH_TMP} -framework SDL_sound" CACHE STRING "SDL_sound framework for OSX")
  ENDIF("${SDL_SOUND_FRAMEWORK_PATH_TMP}" STREQUAL "/Library/Frameworks"
    OR "${SDL_SOUND_FRAMEWORK_PATH_TMP}" STREQUAL "/System/Library/Frameworks"
    )
  # Clear the temp variable so nobody can see it
  SET(SDL_SOUND_FRAMEWORK_PATH_TMP "" CACHE INTERNAL "")

ELSE(${SDL_SOUND_INCLUDE_DIR} MATCHES ".framework")
  FIND_LIBRARY(SDL_SOUND_LIBRARY 
    NAMES SDL_sound
    PATHS
    $ENV{SDLSOUNDDIR}/lib
    $ENV{SDLDIR}/lib
    /usr/local/lib
    /usr/lib
    /sw/lib
    /opt/local/lib
    /opt/csw/lib
    /opt/lib
    )
ENDIF(${SDL_SOUND_INCLUDE_DIR} MATCHES ".framework")

SET(SDL_SOUND_FOUND "NO")
IF(SDL_FOUND AND SDL_SOUND_INCLUDE_DIR AND SDL_SOUND_LIBRARY)

  # CMake is giving me problems using TRY_COMPILE with the CMAKE_FLAGS
  # for the :STRING syntax if I have multiple values contained in a
  # single variable. This is a problem for the SDL_LIBRARY variable
  # because it does just that. When I feed this variable to the command,
  # only the first value gets the appropriate modifier (e.g. -I) and 
  # the rest get dropped.
  # To get multiple single variables to work, I must separate them with a "\;"
  # I could go back and modify the FindSDL.cmake module, but that's kind of painful.
  # The solution would be to try something like:
  # SET(SDL_TRY_COMPILE_LIBRARY_LIST "${SDL_TRY_COMPILE_LIBRARY_LIST}\;${CMAKE_THREAD_LIBS_INIT}")
  # Instead, it was suggested on the mailing list to write a temporary CMakeLists.txt
  # with a temporary test project and invoke that with TRY_COMPILE.
  # See message thread "Figuring out dependencies for a library in order to build"
  # 2005-07-16  
  #     TRY_COMPILE( 
  #             MY_RESULT
  #             ${CMAKE_BINARY_DIR}
  #             ${PROJECT_SOURCE_DIR}/DetermineSoundLibs.c
  #             CMAKE_FLAGS 
  #                     -DINCLUDE_DIRECTORIES:STRING=${SDL_INCLUDE_DIR}\;${SDL_SOUND_INCLUDE_DIR}
  #                     -DLINK_LIBRARIES:STRING=${SDL_SOUND_LIBRARY}\;${SDL_LIBRARY}
  #             OUTPUT_VARIABLE MY_OUTPUT
  #     )

  # To minimize external dependencies, create a sdlsound test program
  # which will be used to figure out if additional link dependencies are
  # required for the link phase.
  FILE(WRITE ${PROJECT_BINARY_DIR}/CMakeFiles/CMakeTmp/DetermineSoundLibs.c
    "#include \"SDL_sound.h\"
    #include \"SDL.h\"
    int main(int argc, char* argv[])
    {
        Sound_AudioInfo desired;
        Sound_Sample* sample;

        SDL_Init(0);
        Sound_Init();
        
        /* This doesn't actually have to work, but Init() is a no-op
         * for some of the decoders, so this should force more symbols
         * to be pulled in.
         */
        sample = Sound_NewSampleFromFile(argv[1], &desired, 4096);
        
        Sound_Quit();
        SDL_Quit();
        return 0;
     }"
     )


   # Write the CMakeLists.txt and test project
   # Weird, this is still sketchy. If I don't quote the variables
   # in the TARGET_LINK_LIBRARIES, I seem to loose everything 
   # in the SDL_LIBRARY string after the "-framework".
   # But if I quote the stuff in INCLUDE_DIRECTORIES, it doesn't work.
   FILE(WRITE ${PROJECT_BINARY_DIR}/CMakeFiles/CMakeTmp/CMakeLists.txt
     "PROJECT(DetermineSoundLibs)
        INCLUDE_DIRECTORIES(${SDL_INCLUDE_DIR} ${SDL_SOUND_INCLUDE_DIR})
        ADD_EXECUTABLE(DetermineSoundLibs DetermineSoundLibs.c)
        TARGET_LINK_LIBRARIES(DetermineSoundLibs \"${SDL_SOUND_LIBRARY} ${SDL_LIBRARY}\")"
     )

   TRY_COMPILE( 
     MY_RESULT
     ${PROJECT_BINARY_DIR}/CMakeFiles/CMakeTmp
     ${PROJECT_BINARY_DIR}/CMakeFiles/CMakeTmp
     DetermineSoundLibs
     OUTPUT_VARIABLE MY_OUTPUT
     )
   
   #MESSAGE("${MY_RESULT}")
   #MESSAGE(${MY_OUTPUT})
   
   IF(NOT MY_RESULT)
     
     # I expect that MPGLIB, VOC, WAV, AIFF, and SHN are compiled in statically.
     # I think Timidity is also compiled in statically.
     # I've never had to explcitly link against Quicktime, so I'll skip that for now.
     
     SET(SDL_SOUND_LIBRARIES_TMP ${SDL_SOUND_LIBRARY})
     
     # Find MikMod
     IF("${MY_OUTPUT}" MATCHES "MikMod_")
       FIND_FILE(TEMP_SDLSOUND_FIND_MIKMOD_FRAMEWORK 
         libmikmod-coreaudio 
         ~/Library/Frameworks/libmikmod-coreaudio.framework
         /Library/Frameworks/libmikmod-coreaudio.framework
         )
       IF(TEMP_SDLSOUND_FIND_MIKMOD_FRAMEWORK)
         # Extract the path the framework resides in so we can use it for the -F flag
         STRING(REGEX REPLACE "(.*)/.*\\.framework/.*" "\\1" TEMP_SDLSOUND_MIKMOD_FRAMEWORK_PATH_TMP ${TEMP_SDLSOUND_FIND_MIKMOD_FRAMEWORK})
         IF("${TEMP_SDLSOUND_MIKMOD_FRAMEWORK_PATH_TMP}" STREQUAL "/Library/Frameworks"
             OR "${TEMP_SDLSOUND_MIKMOD_FRAMEWORK_PATH_TMP}" STREQUAL "/System/Library/Frameworks"
             )
           # It's in the default search path so I don't need to use -F
           SET(MIKMOD_LIBRARY "-framework libmikmod-coreaudio" CACHE STRING "MikMod framework for OSX")
         ELSE("${TEMP_SDLSOUND_MIKMOD_FRAMEWORK_PATH_TMP}" STREQUAL "/Library/Frameworks"
             OR "${TEMP_SDLSOUND_MIKMOD_FRAMEWORK_PATH_TMP}" STREQUAL "/System/Library/Frameworks"
             )
           # It's not in the default search path so I need to use -F
           SET(MIKMOD_LIBRARY "-F${TEMP_SDLSOUND_MIKMOD_FRAMEWORK_PATH_TMP} -framework libmikmod-coreaudio" CACHE STRING "MikMod framework for OSX")
         ENDIF("${TEMP_SDLSOUND_MIKMOD_FRAMEWORK_PATH_TMP}" STREQUAL "/Library/Frameworks"
           OR "${TEMP_SDLSOUND_MIKMOD_FRAMEWORK_PATH_TMP}" STREQUAL "/System/Library/Frameworks"
           )
         # Clear the temp variable so nobody can see it
         SET(TEMP_SDLSOUND_MIKMOD_FRAMEWORK_PATH_TMP "" CACHE INTERNAL "")

       ELSE(TEMP_SDLSOUND_FIND_MIKMOD_FRAMEWORK)
         FIND_LIBRARY(MIKMOD_LIBRARY
           NAMES mikmod
           PATHS
           $ENV{MIKMODDIR}/lib
           $ENV{SDLSOUNDDIR}/lib
           $ENV{SDLDIR}/lib
           /usr/local/lib
           /usr/lib
           /sw/lib
           /opt/local/lib
           /opt/csw/lib
           /opt/lib
           )
       ENDIF(TEMP_SDLSOUND_FIND_MIKMOD_FRAMEWORK)
       # Clear the temp variable so nobody can see it
       SET(TEMP_SDLSOUND_FIND_MIKMOD_FRAMEWORK "" CACHE INTERNAL "")
       IF(MIKMOD_LIBRARY)
         SET(SDL_SOUND_LIBRARIES_TMP ${SDL_SOUND_LIBRARIES_TMP} ${MIKMOD_LIBRARY})
       ENDIF(MIKMOD_LIBRARY)
     ENDIF("${MY_OUTPUT}" MATCHES "MikMod_")
     
     # Find ModPlug
     IF("${MY_OUTPUT}" MATCHES "MODPLUG_")
       FIND_FILE(TEMP_SDLSOUND_FIND_MODPLUG_FRAMEWORK 
         modplug
         ~/Library/Frameworks/modplug.framework
         /Library/Frameworks/modplug.framework
         )
       IF(TEMP_SDLSOUND_FIND_MODPLUG_FRAMEWORK)
         # Extract the path the framework resides in so we can use it for the -F flag
         STRING(REGEX REPLACE "(.*)/.*\\.framework/.*" "\\1" TEMP_SDLSOUND_MODPLUG_FRAMEWORK_PATH_TMP ${TEMP_SDLSOUND_FIND_MODPLUG_FRAMEWORK})
         MESSAGE("HELLO")
         IF("${TEMP_SDLSOUND_MODPLUG_FRAMEWORK_PATH_TMP}" STREQUAL "/Library/Frameworks"
             OR "${TEMP_SDLSOUND_MODPLUG_FRAMEWORK_PATH_TMP}" STREQUAL "/System/Library/Frameworks"
             )
           # It's in the default search path so I don't need to use -F
           SET(MODPLUG_LIBRARY "-framework modplug" CACHE STRING "MODPLUG framework for OSX")
         ELSE("${TEMP_SDLSOUND_MODPLUG_FRAMEWORK_PATH_TMP}" STREQUAL "/Library/Frameworks"
             OR "${TEMP_SDLSOUND_MODPLUG_FRAMEWORK_PATH_TMP}" STREQUAL "/System/Library/Frameworks"
             )
           # It's not in the default search path so I need to use -F
           SET(MODPLUG_LIBRARY "-F${TEMP_SDLSOUND_MODPLUG_FRAMEWORK_PATH_TMP} -framework modplug" CACHE STRING "MODPLUG framework for OSX")
         ENDIF("${TEMP_SDLSOUND_MODPLUG_FRAMEWORK_PATH_TMP}" STREQUAL "/Library/Frameworks"
           OR "${TEMP_SDLSOUND_MODPLUG_FRAMEWORK_PATH_TMP}" STREQUAL "/System/Library/Frameworks"
           )
         # Clear the temp variable so nobody can see it
         SET(TEMP_SDLSOUND_MODPLUG_FRAMEWORK_PATH_TMP "" CACHE INTERNAL "")
         
       ELSE(TEMP_SDLSOUND_FIND_MODPLUG_FRAMEWORK)
         FIND_LIBRARY(MODPLUG_LIBRARY
           NAMES modplug
           PATHS
           $ENV{MODPLUGDIR}/lib
           $ENV{SDLSOUNDDIR}/lib
           $ENV{SDLDIR}/lib
           /usr/local/lib
           /usr/lib
           /sw/lib
           /opt/local/lib
           /opt/csw/lib
           /opt/lib
           )
       ENDIF(TEMP_SDLSOUND_FIND_MODPLUG_FRAMEWORK)
       # Clear the temp variable so nobody can see it
       SET(TEMP_SDLSOUND_FIND_MODPLUG_FRAMEWORK "" CACHE INTERNAL "")
       IF(MODPLUG_LIBRARY)
         SET(SDL_SOUND_LIBRARIES_TMP ${SDL_SOUND_LIBRARIES_TMP} ${MODPLUG_LIBRARY})
       ENDIF(MODPLUG_LIBRARY)
     ENDIF("${MY_OUTPUT}" MATCHES "MODPLUG_")

     
     # Find Ogg and Vorbis
     IF("${MY_OUTPUT}" MATCHES "ov_")
       FIND_FILE(TEMP_SDLSOUND_FIND_VORBIS_FRAMEWORK
         Vorbis
         ~/Library/Frameworks/Vorbis.framework
         /Library/Frameworks/Vorbis.framework
         )
       IF(TEMP_SDLSOUND_FIND_VORBIS_FRAMEWORK)
         # Extract the path the framework resides in so we can use it for the -F flag
         STRING(REGEX REPLACE "(.*)/.*\\.framework/.*" "\\1" TEMP_SDLSOUND_VORBIS_FRAMEWORK_PATH_TMP ${TEMP_SDLSOUND_FIND_VORBIS_FRAMEWORK})
         IF("${TEMP_SDLSOUND_VORBIS_FRAMEWORK_PATH_TMP}" STREQUAL "/Library/Frameworks"
             OR "${TEMP_SDLSOUND_VORBIS_FRAMEWORK_PATH_TMP}" STREQUAL "/System/Library/Frameworks"
             )
           # It's in the default search path so I don't need to use -F
           SET(VORBIS_LIBRARY "-framework Vorbis" CACHE STRING "Vorbis framework for OSX")
         ELSE("${TEMP_SDLSOUND_VORBIS_FRAMEWORK_PATH_TMP}" STREQUAL "/Library/Frameworks"
             OR "${TEMP_SDLSOUND_VORBIS_FRAMEWORK_PATH_TMP}" STREQUAL "/System/Library/Frameworks"
             )
           # It's not in the default search path so I need to use -F
           SET(VORBIS_LIBRARY "-F${TEMP_SDLSOUND_VORBIS_FRAMEWORK_PATH_TMP} -framework Vorbis" CACHE STRING "Vorbis framework for OSX")
         ENDIF("${TEMP_SDLSOUND_VORBIS_FRAMEWORK_PATH_TMP}" STREQUAL "/Library/Frameworks"
           OR "${TEMP_SDLSOUND_VORBIS_FRAMEWORK_PATH_TMP}" STREQUAL "/System/Library/Frameworks"
           )
         # Clear the temp variable so nobody can see it
         SET(TEMP_SDLSOUND_VORBIS_FRAMEWORK_PATH_TMP "" CACHE INTERNAL "")

       ELSE(TEMP_SDLSOUND_FIND_VORBIS_FRAMEWORK)
         FIND_LIBRARY(VORBIS_LIBRARY
           NAMES vorbis Vorbis VORBIS
           PATHS
           $ENV{VORBISDIR}/lib
           $ENV{OGGDIR}/lib
           $ENV{SDLSOUNDDIR}/lib
           $ENV{SDLDIR}/lib
           /usr/local/lib
           /usr/lib
           /sw/lib
           /opt/local/lib
           /opt/csw/lib
           /opt/lib
           )
       ENDIF(TEMP_SDLSOUND_FIND_VORBIS_FRAMEWORK)
       # Clear the temp variable so nobody can see it
       SET(TEMP_SDLSOUND_FIND_VORBIS_FRAMEWORK "" CACHE INTERNAL "")
       IF(VORBIS_LIBRARY)
         SET(SDL_SOUND_LIBRARIES_TMP ${SDL_SOUND_LIBRARIES_TMP} ${VORBIS_LIBRARY})
       ENDIF(VORBIS_LIBRARY)
       
       FIND_FILE(TEMP_SDLSOUND_FIND_OGG_FRAMEWORK 
         Ogg
         ~/Library/Frameworks/Ogg.framework
         /Library/Frameworks/Ogg.framework
         )
       IF(TEMP_SDLSOUND_FIND_OGG_FRAMEWORK)
         # Extract the path the framework resides in so we can use it for the -F flag
         STRING(REGEX REPLACE "(.*)/.*\\.framework/.*" "\\1" TEMP_SDLSOUND_OGG_FRAMEWORK_PATH_TMP ${TEMP_SDLSOUND_FIND_OGG_FRAMEWORK})
         IF("${TEMP_SDLSOUND_OGG_FRAMEWORK_PATH_TMP}" STREQUAL "/Library/Frameworks"
             OR "${TEMP_SDLSOUND_OGG_FRAMEWORK_PATH_TMP}" STREQUAL "/System/Library/Frameworks"
             )
           # It's in the default search path so I don't need to use -F
           SET(OGG_LIBRARY "-framework Ogg" CACHE STRING "Ogg framework for OSX")
         ELSE("${TEMP_SDLSOUND_OGG_FRAMEWORK_PATH_TMP}" STREQUAL "/Library/Frameworks"
             OR "${TEMP_SDLSOUND_OGG_FRAMEWORK_PATH_TMP}" STREQUAL "/System/Library/Frameworks"
             )
           # It's not in the default search path so I need to use -F
           SET(OGG_LIBRARY "-F${TEMP_SDLSOUND_OGG_FRAMEWORK_PATH_TMP} -framework Ogg" CACHE STRING "Ogg framework for OSX")
         ENDIF("${TEMP_SDLSOUND_OGG_FRAMEWORK_PATH_TMP}" STREQUAL "/Library/Frameworks"
           OR "${TEMP_SDLSOUND_OGG_FRAMEWORK_PATH_TMP}" STREQUAL "/System/Library/Frameworks"
           )
         # Clear the temp variable so nobody can see it
         SET(TEMP_SDLSOUND_OGG_FRAMEWORK_PATH_TMP "" CACHE INTERNAL "")

       ELSE(TEMP_SDLSOUND_FIND_OGG_FRAMEWORK)
         FIND_LIBRARY(OGG_LIBRARY
           NAMES ogg Ogg OGG
           PATHS
           $ENV{OGGDIR}/lib
           $ENV{VORBISDIR}/lib
           $ENV{SDLSOUNDDIR}/lib
           $ENV{SDLDIR}/lib
           /usr/local/lib
           /usr/lib
           /sw/lib
           /opt/local/lib
           /opt/csw/lib
           /opt/lib
           )
       ENDIF(TEMP_SDLSOUND_FIND_OGG_FRAMEWORK)
       # Clear the temp variable so nobody can see it
       SET(TEMP_SDLSOUND_FIND_OGG_FRAMEWORK "" CACHE INTERNAL "")
       IF(OGG_LIBRARY)
         SET(SDL_SOUND_LIBRARIES_TMP ${SDL_SOUND_LIBRARIES_TMP} ${OGG_LIBRARY})
       ENDIF(OGG_LIBRARY)
     ENDIF("${MY_OUTPUT}" MATCHES "ov_")
     
     
     # Find SMPEG
     IF("${MY_OUTPUT}" MATCHES "SMPEG_")
       FIND_FILE(TEMP_SDLSOUND_FIND_SMPEG_FRAMEWORK 
         SMPEG
         ~/Library/Frameworks/smpeg.framework
         /Library/Frameworks/smpeg.framework
         )
       IF(TEMP_SDLSOUND_FIND_SMPEG_FRAMEWORK)
         # Extract the path the framework resides in so we can use it for the -F flag
         STRING(REGEX REPLACE "(.*)/.*\\.framework/.*" "\\1" TEMP_SDLSOUND_SMPEG_FRAMEWORK_PATH_TMP ${TEMP_SDLSOUND_FIND_SMPEG_FRAMEWORK})
         IF("${TEMP_SDLSOUND_SMPEG_FRAMEWORK_PATH_TMP}" STREQUAL "/Library/Frameworks"
             OR "${TEMP_SDLSOUND_SMPEG_FRAMEWORK_PATH_TMP}" STREQUAL "/System/Library/Frameworks"
             )
           # It's in the default search path so I don't need to use -F
           SET(SMPEG_LIBRARY "-framework smpeg" CACHE STRING "SMPEG framework for OSX")
         ELSE("${TEMP_SDLSOUND_SMPEG_FRAMEWORK_PATH_TMP}" STREQUAL "/Library/Frameworks"
             OR "${TEMP_SDLSOUND_SMPEG_FRAMEWORK_PATH_TMP}" STREQUAL "/System/Library/Frameworks"
             )
           # It's not in the default search path so I need to use -F
           SET(SMPEG_LIBRARY "-F${TEMP_SDLSOUND_SMPEG_FRAMEWORK_PATH_TMP} -framework smpeg" CACHE STRING "SMPEG framework for OSX")
         ENDIF("${TEMP_SDLSOUND_SMPEG_FRAMEWORK_PATH_TMP}" STREQUAL "/Library/Frameworks"
           OR "${TEMP_SDLSOUND_SMPEG_FRAMEWORK_PATH_TMP}" STREQUAL "/System/Library/Frameworks"
           )
         # Clear the temp variable so nobody can see it
         SET(TEMP_SDLSOUND_SMPEG_FRAMEWORK_PATH_TMP "" CACHE INTERNAL "")

       ELSE(TEMP_SDLSOUND_FIND_SMPEG_FRAMEWORK)
         FIND_LIBRARY(SMPEG_LIBRARY
           NAMES smpeg SMPEG Smpeg SMpeg
           PATHS
           $ENV{SMPEGDIR}/lib
           $ENV{SDLSOUNDDIR}/lib
           $ENV{SDLDIR}/lib
           /usr/local/lib
           /usr/lib
           /sw/lib
           /opt/local/lib
           /opt/csw/lib
           /opt/lib
           )
       ENDIF(TEMP_SDLSOUND_FIND_SMPEG_FRAMEWORK)
       # Clear the temp variable so nobody can see it
       SET(TEMP_SDLSOUND_FIND_SMPEG_FRAMEWORK "" CACHE INTERNAL "")
       IF(SMPEG_LIBRARY)
         SET(SDL_SOUND_LIBRARIES_TMP ${SDL_SOUND_LIBRARIES_TMP} ${SMPEG_LIBRARY})
       ENDIF(SMPEG_LIBRARY)
     ENDIF("${MY_OUTPUT}" MATCHES "SMPEG_")
     
     
     # Find FLAC
     IF("${MY_OUTPUT}" MATCHES "FLAC_")
       FIND_FILE(TEMP_SDLSOUND_FIND_FLAC_FRAMEWORK 
         FLAC
         ~/Library/Frameworks/FLAC.framework
         /Library/Frameworks/FLAC.framework
         )
       IF(TEMP_SDLSOUND_FIND_FLAC_FRAMEWORK)
         # Extract the path the framework resides in so we can use it for the -F flag
         STRING(REGEX REPLACE "(.*)/.*\\.framework/.*" "\\1" TEMP_SDLSOUND_FLAC_FRAMEWORK_PATH_TMP ${TEMP_SDLSOUND_FIND_FLAC_FRAMEWORK})
         IF("${TEMP_SDLSOUND_FLAC_FRAMEWORK_PATH_TMP}" STREQUAL "/Library/Frameworks"
             OR "${TEMP_SDLSOUND_FLAC_FRAMEWORK_PATH_TMP}" STREQUAL "/System/Library/Frameworks"
             )
           # It's in the default search path so I don't need to use -F
           SET(FLAC_LIBRARY "-framework FLAC" CACHE STRING "FLAC framework for OSX")
         ELSE("${TEMP_SDLSOUND_FLAC_FRAMEWORK_PATH_TMP}" STREQUAL "/Library/Frameworks"
             OR "${TEMP_SDLSOUND_FLAC_FRAMEWORK_PATH_TMP}" STREQUAL "/System/Library/Frameworks"
             )
           # It's not in the default search path so I need to use -F
           SET(FLAC_LIBRARY "-F${TEMP_SDLSOUND_FLAC_FRAMEWORK_PATH_TMP} -framework FLAC" CACHE STRING "FLAC framework for OSX")
         ENDIF("${TEMP_SDLSOUND_FLAC_FRAMEWORK_PATH_TMP}" STREQUAL "/Library/Frameworks"
           OR "${TEMP_SDLSOUND_FLAC_FRAMEWORK_PATH_TMP}" STREQUAL "/System/Library/Frameworks"
           )
         # Clear the temp variable so nobody can see it
         SET(TEMP_SDLSOUND_FLAC_FRAMEWORK_PATH_TMP "" CACHE INTERNAL "")

       ELSE(TEMP_SDLSOUND_FIND_FLAC_FRAMEWORK)
         FIND_LIBRARY(FLAC_LIBRARY
           NAMES flac FLAC
           PATHS
           $ENV{FLACDIR}/lib
           $ENV{SDLSOUNDDIR}/lib
           $ENV{SDLDIR}/lib
           /usr/local/lib
           /usr/lib
           /sw/lib
           /opt/local/lib
           /opt/csw/lib
           /opt/lib
           )
       ENDIF(TEMP_SDLSOUND_FIND_FLAC_FRAMEWORK)
       # Clear the temp variable so nobody can see it
       SET(TEMP_SDLSOUND_FIND_FLAC_FRAMEWORK "" CACHE INTERNAL "")
       IF(FLAC_LIBRARY)
         SET(SDL_SOUND_LIBRARIES_TMP ${SDL_SOUND_LIBRARIES_TMP} ${FLAC_LIBRARY})
       ENDIF(FLAC_LIBRARY)
     ENDIF("${MY_OUTPUT}" MATCHES "FLAC_")
     
     
     # Hmmm...Speex seems to depend on Ogg. This might be a problem if
     # the TRY_COMPILE attempt gets blocked at SPEEX before it can pull
     # in the Ogg symbols. I'm not sure if I should duplicate the ogg stuff
     # above for here or if two ogg entries will screw up things.
     IF("${MY_OUTPUT}" MATCHES "speex_")
       FIND_FILE(TEMP_SDLSOUND_FIND_SPEEX_FRAMEWORK 
         speex
         ~/Library/Frameworks/speex.framework
         /Library/Frameworks/speex.framework
         )
       IF(TEMP_SDLSOUND_FIND_SPEEX_FRAMEWORK)
         # Extract the path the framework resides in so we can use it for the -F flag
         STRING(REGEX REPLACE "(.*)/.*\\.framework/.*" "\\1" TEMP_SDLSOUND_SPEEX_FRAMEWORK_PATH_TMP ${TEMP_SDLSOUND_FIND_SPEEX_FRAMEWORK})
         IF("${TEMP_SDLSOUND_SPEEX_FRAMEWORK_PATH_TMP}" STREQUAL "/Library/Frameworks"
             OR "${TEMP_SDLSOUND_SPEEX_FRAMEWORK_PATH_TMP}" STREQUAL "/System/Library/Frameworks"
             )
           # It's in the default search path so I don't need to use -F
           SET(SPEEX_LIBRARY "-framework speex" CACHE STRING "SPEEX framework for OSX")
         ELSE("${TEMP_SDLSOUND_SPEEX_FRAMEWORK_PATH_TMP}" STREQUAL "/Library/Frameworks"
             OR "${TEMP_SDLSOUND_SPEEX_FRAMEWORK_PATH_TMP}" STREQUAL "/System/Library/Frameworks"
             )
           # It's not in the default search path so I need to use -F
           SET(SPEEX_LIBRARY "-F${TEMP_SDLSOUND_SPEEX_FRAMEWORK_PATH_TMP} -framework speex" CACHE STRING "SPEEX framework for OSX")
         ENDIF("${TEMP_SDLSOUND_SPEEX_FRAMEWORK_PATH_TMP}" STREQUAL "/Library/Frameworks"
           OR "${TEMP_SDLSOUND_SPEEX_FRAMEWORK_PATH_TMP}" STREQUAL "/System/Library/Frameworks"
           )
         # Clear the temp variable so nobody can see it
         SET(TEMP_SDLSOUND_SPEEX_FRAMEWORK_PATH_TMP "" CACHE INTERNAL "")

       ELSE(TEMP_SDLSOUND_FIND_SPEEX_FRAMEWORK)
         FIND_LIBRARY(SPEEX_LIBRARY
           NAMES speex SPEEX
           PATHS
           $ENV{SPEEXDIR}/lib
           $ENV{SDLSOUNDDIR}/lib
           $ENV{SDLDIR}/lib
           /usr/local/lib
           /usr/lib
           /sw/lib
           /opt/local/lib
           /opt/csw/lib
           /opt/lib
           )
       ENDIF(TEMP_SDLSOUND_FIND_SPEEX_FRAMEWORK)
       # Clear the temp variable so nobody can see it
       SET(TEMP_SDLSOUND_FIND_SPEEX_FRAMEWORK "" CACHE INTERNAL "")
       SET(SDL_SOUND_LIBRARIES_TMP ${SDL_SOUND_LIBRARIES_TMP} ${SPEEX_LIBRARY})
       
       # Find OGG (needed for Speex)
       FIND_FILE(TEMP_SDLSOUND_FIND_OGG_FRAMEWORK 
         Ogg
         ~/Library/Frameworks/Ogg.framework
         /Library/Frameworks/Ogg.framework
         )
       IF(TEMP_SDLSOUND_FIND_OGG_FRAMEWORK)
         # Extract the path the framework resides in so we can use it for the -F flag
         STRING(REGEX REPLACE "(.*)/.*\\.framework/.*" "\\1" TEMP_SDLSOUND_OGG_FRAMEWORK_PATH_TMP ${TEMP_SDLSOUND_FIND_OGG_FRAMEWORK})
         IF("${TEMP_SDLSOUND_OGG_FRAMEWORK_PATH_TMP}" STREQUAL "/Library/Frameworks"
             OR "${TEMP_SDLSOUND_OGG_FRAMEWORK_PATH_TMP}" STREQUAL "/System/Library/Frameworks"
             )
           # It's in the default search path so I don't need to use -F
           SET(OGG_LIBRARY "-framework Ogg" CACHE STRING "Ogg framework for OSX")
         ELSE("${TEMP_SDLSOUND_OGG_FRAMEWORK_PATH_TMP}" STREQUAL "/Library/Frameworks"
             OR "${TEMP_SDLSOUND_OGG_FRAMEWORK_PATH_TMP}" STREQUAL "/System/Library/Frameworks"
             )
           # It's not in the default search path so I need to use -F
           SET(OGG_LIBRARY "-F${TEMP_SDLSOUND_OGG_FRAMEWORK_PATH_TMP} -framework Ogg" CACHE STRING "Ogg framework for OSX")
         ENDIF("${TEMP_SDLSOUND_OGG_FRAMEWORK_PATH_TMP}" STREQUAL "/Library/Frameworks"
           OR "${TEMP_SDLSOUND_OGG_FRAMEWORK_PATH_TMP}" STREQUAL "/System/Library/Frameworks"
           )
         # Clear the temp variable so nobody can see it
         SET(TEMP_SDLSOUND_OGG_FRAMEWORK_PATH_TMP "" CACHE INTERNAL "")
         
       ELSE(TEMP_SDLSOUND_FIND_OGG_FRAMEWORK)
         FIND_LIBRARY(OGG_LIBRARY
           NAMES ogg Ogg OGG
           PATHS
           $ENV{OGGDIR}/lib
           $ENV{VORBISDIR}/lib
           $ENV{SPEEXDIR}/lib
           $ENV{SDLSOUNDDIR}/lib
           $ENV{SDLDIR}/lib
           /usr/local/lib
           /usr/lib
           /sw/lib
           /opt/local/lib
           /opt/csw/lib
           /opt/lib
           )
       ENDIF(TEMP_SDLSOUND_FIND_OGG_FRAMEWORK)
       # Clear the temp variable so nobody can see it
       SET(TEMP_SDLSOUND_FIND_OGG_FRAMEWORK "" CACHE INTERNAL "")
       IF(OGG_LIBRARY)
         SET(SDL_SOUND_LIBRARIES_TMP ${SDL_SOUND_LIBRARIES_TMP} ${OGG_LIBRARY})
       ENDIF(OGG_LIBRARY)
     ENDIF("${MY_OUTPUT}" MATCHES "speex_")
     
     
     
   ELSE(NOT MY_RESULT)
     SET(SDL_SOUND_LIBRARIES "${SDL_SOUND_EXTRAS} ${SDL_SOUND_LIBRARY}" CACHE INTERNAL "SDL_sound and dependent libraries")
   ENDIF(NOT MY_RESULT)

   SET(SDL_SOUND_LIBRARIES "${SDL_SOUND_EXTRAS} ${SDL_SOUND_LIBRARIES_TMP}" CACHE INTERNAL "SDL_sound and dependent libraries")
   SET(SDL_SOUND_FOUND "YES")
 ENDIF(SDL_FOUND AND SDL_SOUND_INCLUDE_DIR AND SDL_SOUND_LIBRARY)

 # MESSAGE("SDL_SOUND_LIBRARIES is ${SDL_SOUND_LIBRARIES}")