.vimrc: F11 -> F3 set nu!

This reverts commit 2cb997e0ca.

.Xdefaults

@@ -0,0 +1,4 @@
+#include ".urxvt/Xdefaults"
+#include ".fonts/Xdefaults"
+
+! Xcursor.theme: gentoo-silver

.clang_complete

@@ -0,0 +1,12 @@
+-DDEBUG
+-I/usr/lib64/clang/3.1/include
+-I/usr/lib64/gcc/x86_64-pc-linux-gnu/4.5.3/include/g++-v4
+-I/usr/lib64/gcc/x86_64-pc-linux-gnu/4.5.3/include/g++-v4/x86_64-pc-linux-gnu
+-I/usr/include/linux
+-I/usr/lib64/gcc/x86_64-pc-linux-gnu/4.5.3/include
+-I/usr/include/glib-2.0
+-I/usr/include/glib-2.0/glib
+-I/usr/lib/glib-2.0/include
+-I/usr/include/glib-2.0/gio
+-I/usr/include/glib-2.0/gobject
+

.config/LyX/lyx.conf

@@ -0,0 +1,44 @@
+[ui_files]
+0=/usr/share/lyx/ui/default.ui
+0\date=@Variant(\0\0\0\x10\0%x\xcd\x3j_\xd8\x1)
+
+[views]
+0\pos=@Point(3 30)
+0\size=@Size(1672 998)
+0\layout=@ByteArray(\0\0\0\xff\0\0\0\0\xfd\0\0\0\x2\0\0\0\0\0\0\0\0\0\0\0\0\xfc\x2\0\0\0\x1\xfb\0\0\0\x6\0t\0o\0\x63\0\0\0\0\0\xff\xff\xff\xff\0\0\x1[\0\xff\xff\xff\0\0\0\x3\0\0\0\0\0\0\0\0\xfc\x1\0\0\0\x1\xfb\0\0\0\x16\0v\0i\0\x65\0w\0-\0s\0o\0u\0r\0\x63\0\x65\0\0\0\0\0\xff\xff\xff\xff\0\0\x1\xb6\0\xff\xff\xff\0\0\x6\x88\0\0\x3\xa0\0\0\0\x4\0\0\0\x4\0\0\0\b\0\0\0\b\xfc\0\0\0\x1d\0\0\0\x2\0\0\0\x3\0\0\0\x10\0s\0t\0\x61\0n\0\x64\0\x61\0r\0\x64\x1\0\0\0\0\xff\xff\xff\xff\0\0\0\0\0\0\0\0\0\0\0\n\0\x65\0x\0t\0r\0\x61\x1\0\0\x2s\xff\xff\xff\xff\0\0\0\0\0\0\0\0\0\0\0\x16\0v\0i\0\x65\0w\0/\0u\0p\0\x64\0\x61\0t\0\x65\x1\0\0\x4\xfb\0\0\0P\0\0\0\0\0\0\0\0\0\0\0\x2\0\0\0\0\0\0\0\x2\0\0\0\x1\0\0\0\f\0r\0\x65\0v\0i\0\x65\0w\0\0\0\0\0\xff\xff\xff\xff\0\0\0\0\0\0\0\0\0\0\0\x2\0\0\0\0\0\0\0\x2\0\0\0\x1\0\0\0\x6\0v\0\x63\0s\0\0\0\0\0\xff\xff\xff\xff\0\0\0\0\0\0\0\0\0\0\0\x3\0\0\0\x1\0\0\0\n\0t\0\x61\0\x62\0l\0\x65\0\0\0\0\0\xff\xff\xff\xff\0\0\0\0\0\0\0\0\0\0\0\x3\0\0\0\x1\0\0\0\b\0m\0\x61\0t\0h\0\0\0\0\0\xff\xff\xff\xff\0\0\0\0\0\0\0\0\0\0\0\x3\0\0\0\x1\0\0\0\"\0m\0\x61\0t\0h\0m\0\x61\0\x63\0r\0o\0t\0\x65\0m\0p\0l\0\x61\0t\0\x65\0\0\0\0\0\xff\xff\xff\xff\0\0\0\0\0\0\0\0\0\0\0\x3\0\0\0\x1\0\0\0\x14\0m\0i\0n\0i\0\x62\0u\0\x66\0\x66\0\x65\0r\0\0\0\0\0\xff\xff\xff\xff\0\0\0\0\0\0\0\0\0\0\0\x3\0\0\0\x1\0\0\0\x16\0m\0\x61\0t\0h\0_\0p\0\x61\0n\0\x65\0l\0s\0\0\0\0\0\xff\xff\xff\xff\0\0\0\0\0\0\0\0\0\0\0\x3\0\0\0\x1\0\0\0\x12\0\x66\0u\0n\0\x63\0t\0i\0o\0n\0s\0\0\0\0\0\xff\xff\xff\xff\0\0\0\0\0\0\0\0\0\0\0\x3\0\0\0\x1\0\0\0\n\0s\0p\0\x61\0\x63\0\x65\0\0\0\0\0\xff\xff\xff\xff\0\0\0\0\0\0\0\0\0\0\0\x3\0\0\0\x1\0\0\0\x16\0s\0q\0r\0t\0-\0s\0q\0u\0\x61\0r\0\x65\0\0\0\0\0\xff\xff\xff\xff\0\0\0\0\0\0\0\0\0\0\0\x3\0\0\0\x1\0\0\0\n\0s\0t\0y\0l\0\x65\0\0\0\0\0\xff\xff\xff\xff\0\0\0\0\0\0\0\0\0\0\0\x3\0\0\0\x1\0\0\0\x16\0\x66\0r\0\x61\0\x63\0-\0s\0q\0u\0\x61\0r\0\x65\0\0\0\0\0\xff\xff\xff\xff\0\0\0\0\0\0\0\0\0\0\0\x3\0\0\0\x1\0\0\0\b\0\x66\0o\0n\0t\0\0\0\0\0\xff\xff\xff\xff\0\0\0\0\0\0\0\0\0\0\0\x3\0\0\0\x1\0\0\0\x14\0l\0\x61\0t\0\x65\0x\0_\0\x64\0o\0t\0s\0\0\0\0\0\xff\xff\xff\xff\0\0\0\0\0\0\0\0\0\0\0\x3\0\0\0\x1\0\0\0\x14\0l\0\x61\0t\0\x65\0x\0_\0\x64\0\x65\0\x63\0o\0\0\0\0\0\xff\xff\xff\xff\0\0\0\0\0\0\0\0\0\0\0\x3\0\0\0\x1\0\0\0\x16\0l\0\x61\0t\0\x65\0x\0_\0\x61\0r\0r\0o\0w\0\0\0\0\0\xff\xff\xff\xff\0\0\0\0\0\0\0\0\0\0\0\x3\0\0\0\x1\0\0\0\x12\0l\0\x61\0t\0\x65\0x\0_\0\x62\0o\0p\0\0\0\0\0\xff\xff\xff\xff\0\0\0\0\0\0\0\0\0\0\0\x3\0\0\0\x1\0\0\0\x14\0l\0\x61\0t\0\x65\0x\0_\0\x62\0r\0\x65\0l\0\0\0\0\0\xff\xff\xff\xff\0\0\0\0\0\0\0\0\0\0\0\x3\0\0\0\x1\0\0\0\x16\0l\0\x61\0t\0\x65\0x\0_\0g\0r\0\x65\0\x65\0k\0\0\0\0\0\xff\xff\xff\xff\0\0\0\0\0\0\0\0\0\0\0\x3\0\0\0\x1\0\0\0\x14\0l\0\x61\0t\0\x65\0x\0_\0m\0i\0s\0\x63\0\0\0\0\0\xff\xff\xff\xff\0\0\0\0\0\0\0\0\0\0\0\x3\0\0\0\x1\0\0\0\x16\0l\0\x61\0t\0\x65\0x\0_\0v\0\x61\0r\0s\0z\0\0\0\0\0\xff\xff\xff\xff\0\0\0\0\0\0\0\0\0\0\0\x3\0\0\0\x1\0\0\0\x1c\0l\0\x61\0t\0\x65\0x\0_\0\x61\0m\0s\0_\0m\0i\0s\0\x63\0\0\0\0\0\xff\xff\xff\xff\0\0\0\0\0\0\0\0\0\0\0\x3\0\0\0\x1\0\0\0 \0l\0\x61\0t\0\x65\0x\0_\0\x61\0m\0s\0_\0\x61\0r\0r\0o\0w\0s\0\0\0\0\0\xff\xff\xff\xff\0\0\0\0\0\0\0\0\0\0\0\x3\0\0\0\x1\0\0\0\x1a\0l\0\x61\0t\0\x65\0x\0_\0\x61\0m\0s\0_\0r\0\x65\0l\0\0\0\0\0\xff\xff\xff\xff\0\0\0\0\0\0\0\0\0\0\0\x3\0\0\0\x1\0\0\0\x1c\0l\0\x61\0t\0\x65\0x\0_\0\x61\0m\0s\0_\0n\0r\0\x65\0l\0\0\0\0\0\xff\xff\xff\xff\0\0\0\0\0\0\0\0\0\0\0\x3\0\0\0\x1\0\0\0\x1a\0l\0\x61\0t\0\x65\0x\0_\0\x61\0m\0s\0_\0o\0p\0s\0\0\0\0\0\xff\xff\xff\xff\0\0\0\0\0\0\0\0)
+0\icon_size=@Size(14 14)
+0\extra\visibility=5
+0\font\visibility=10
+0\frac-square\visibility=10
+0\functions\visibility=10
+0\latex_ams_arrows\visibility=10
+0\latex_ams_misc\visibility=10
+0\latex_ams_nrel\visibility=10
+0\latex_ams_ops\visibility=10
+0\latex_ams_rel\visibility=10
+0\latex_arrow\visibility=10
+0\latex_bop\visibility=10
+0\latex_brel\visibility=10
+0\latex_deco\visibility=10
+0\latex_dots\visibility=10
+0\latex_greek\visibility=10
+0\latex_misc\visibility=10
+0\latex_varsz\visibility=10
+0\math\visibility=200
+0\math_panels\visibility=200
+0\mathmacrotemplate\visibility=1096
+0\minibuffer\visibility=10
+0\review\visibility=580
+0\space\visibility=10
+0\sqrt-square\visibility=10
+0\standard\visibility=5
+0\style\visibility=10
+0\table\visibility=328
+0\vcs\visibility=6
+0\view\update\visibility=5
+0\aboutlyx\geometry=@ByteArray(\x1\xd9\xd0\xcb\0\x1\0\0\0\0\x1\x2\0\0\0\xaa\0\0\x2J\0\0\x1\xd6\0\0\x1\x3\0\0\0\xbc\0\0\x2I\0\0\x1\xd5\0\0\0\0\0\0)
+0\prefs\geometry=@ByteArray(\x1\xd9\xd0\xcb\0\x1\0\0\0\0\0\xdd\0\0\0\x17\0\0\x3\xc7\0\0\x1\xf8\0\0\0\xde\0\0\0)\0\0\x3\xc6\0\0\x1\xf7\0\0\0\0\0\0)
+0\toc\geometry=@ByteArray(\x1\xd9\xd0\xcb\0\x1\0\0\0\0\0\0\0\0\0\0\0\0\0\xcf\0\0\x1Z\0\0\0\0\0\0\0\0\0\0\0\xcf\0\0\x1Z\0\0\0\0\0\0)
+0\view-source\geometry=@ByteArray(\x1\xd9\xd0\xcb\0\x1\0\0\0\0\0\0\0\0\0\0\0\0\x1\xb5\0\0\0[\0\0\0\0\0\0\0\0\0\0\x1\xb5\0\0\0[\0\0\0\0\0\0)
+0\view-source\fullsource=false
+0\view-source\autoupdate=true

.config/geany/geany.conf

@@ -0,0 +1,192 @@
+
+[geany]
+default_open_path=/home/kolan
+cmdline_new_files=true
+notebook_double_click_hides_widgets=false
+tab_pos_sidebar=2
+highlighting_invert_all=false
+pref_main_suppress_search_dialogs=false
+pref_main_search_use_current_word=true
+check_detect_indent=false
+use_tab_to_indent=true
+pref_editor_tab_width=8
+indent_hard_tab_width=8
+indent_mode=2
+indent_type=1
+autocomplete_doc_words=false
+completion_drops_rest_of_word=false
+autocompletion_max_entries=30
+mru_length=10
+disk_check_timeout=30
+show_editor_scrollbars=true
+brace_match_ltgt=false
+use_gtk_word_boundaries=true
+complete_snippets_whilst_editing=false
+show_symbol_list_expanders=true
+allow_always_save=false
+use_safe_file_saving=false
+documents_show_paths=true
+sidebar_page=2
+pref_main_load_session=true
+pref_main_project_session=true
+pref_main_project_file_in_basedir=true
+pref_main_save_winpos=true
+pref_main_confirm_exit=false
+pref_main_suppress_status_messages=false
+switch_msgwin_pages=false
+beep_on_errors=true
+auto_focus=false
+sidebar_symbol_visible=true
+sidebar_openfiles_visible=true
+editor_font=Liberation Mono 8
+tagbar_font=Sans 8
+msgwin_font=Sans 8
+show_notebook_tabs=true
+show_tab_cross=true
+tab_order_ltr=true
+tab_pos_editor=2
+tab_pos_msgwin=0
+show_indent_guide=false
+show_white_space=false
+show_line_endings=false
+show_markers_margin=true
+show_linenumber_margin=true
+long_line_type=0
+long_line_column=72
+long_line_color=#C2EBC2
+symbolcompletion_max_height=10
+symbolcompletion_min_chars=4
+use_folding=true
+unfold_all_children=true
+use_indicators=true
+line_wrapping=true
+auto_close_xml_tags=true
+complete_snippets=true
+auto_complete_symbols=true
+pref_editor_disable_dnd=false
+pref_editor_smart_home_key=true
+pref_editor_newline_strip=true
+line_break_column=72
+auto_continue_multiline=true
+comment_toggle_mark=~ 
+scroll_stop_at_last_line=true
+autoclose_chars=31
+pref_editor_default_new_encoding=UTF-8
+pref_editor_default_open_encoding=WINDOWS-1251
+default_eol_character=2
+pref_editor_new_line=true
+pref_editor_replace_tabs=false
+pref_editor_trail_space=true
+pref_toolbar_show=true
+pref_toolbar_append_to_menu=false
+pref_toolbar_icon_style=0
+pref_toolbar_icon_size=0
+pref_template_developer=Kolan Sh.
+pref_template_company=InSys Ltd
+pref_template_mail=mecareful@gmail.com
+pref_template_initial=SNS
+pref_template_version=1.0
+pref_template_year=%Y
+pref_template_date=%Y-%m-%d
+pref_template_datetime=%d.%m.%Y %H:%M:%S %Z
+context_action_cmd=
+sidebar_visible=true
+statusbar_visible=true
+msgwindow_visible=true
+fullscreen=false
+scribble_text=
+scribble_pos=0
+treeview_position=0
+msgwindow_position=687
+geometry=3;30;1672;968;0;
+custom_date_format=
+sidebar_pos=0
+virtualspace=1
+color_scheme=
+compiler_tab_autoscroll=true
+tab_order_beside=false
+msgwin_status_visible=true
+msgwin_compiler_visible=true
+msgwin_messages_visible=true
+msgwin_scribble_visible=true
+use_native_windows_dialogs=false
+long_line_enabled=true
+pref_toolbar_use_gtk_default_style=false
+pref_toolbar_use_gtk_default_icon=true
+gio_unsafe_save_backup=false
+find_selection_type=0
+statusbar_template=
+new_document_after_close=false
+pref_editor_ensure_convert_line_endings=false
+
+[search]
+pref_search_current_file_dir=true
+find_all_expanded=false
+replace_all_expanded=true
+fif_mode=0
+fif_extra_options=
+fif_case_sensitive=true
+fif_match_whole_word=false
+fif_invert_results=false
+fif_recursive=false
+fif_use_extra_options=false
+position_find_x=90
+position_find_y=386
+position_replace_x=800
+position_replace_y=464
+position_fif_x=1154
+position_fif_y=409
+fif_regexp=false
+fif_files=
+fif_use_files=false
+
+[plugins]
+load_plugins=true
+custom_plugin_path=/home/kolan/.geany/plugins
+active_plugins=/usr/lib64/geany/codenav.so;/usr/lib64/geany/geanyextrasel.so;/usr/lib64/geany/geanylatex.so;/usr/lib64/geany/spellcheck.so;/usr/lib64/geany/treebrowser.so;/usr/lib64/geany/classbuilder.so;/usr/lib64/geany/saveactions.so;/usr/lib64/geany/addons.so;/usr/lib64/geany/splitwindow.so;/usr/lib64/geany/shiftcolumn.so;/usr/lib64/geany/htmlchars.so;/usr/lib64/geany/export.so;
+
+[tools]
+make_cmd=make
+term_cmd=urxvt
+browser_cmd=firefox
+grep_cmd=grep
+
+[printing]
+print_cmd=
+use_gtk_printing=true
+print_line_numbers=true
+print_page_numbers=true
+print_page_header=true
+page_header_basename=false
+page_header_datefmt=%c
+
+[VTE]
+load_vte=true
+emulation=xterm
+font=Terminus 10
+scroll_on_key=true
+scroll_on_out=true
+enable_bash_keys=false
+ignore_menu_bar_accel=false
+follow_path=true
+run_in_vte=true
+skip_run_script=false
+cursor_blinks=true
+scrollback_lines=500
+shell=/bin/bash
+colour_fore=#FFFFFF
+colour_back=#000000
+last_dir=/home/kolan/projects/dataserver
+send_selection_unsafe=false
+
+[project]
+session_file=/home/kolan/projects/dataserver/dataserver.geany
+project_file_path=/home/kolan/projects
+
+[files]
+recent_files=/home/kolan/projects/dataserver/netfuncs.h;/home/kolan/projects/dataserver/netfuncs.c;/home/kolan/projects/dataserver/mpool.h;/home/kolan/projects/dataserver/mpool.c;/home/kolan/projects/dataserver/xerror.c;/home/kolan/projects/dataserver/xerror.h;/home/kolan/projects/dataserver/xmalloc.h;/home/kolan/projects/dataserver/xmalloc.c;/home/kolan/dev/c/malloc_speed_test/pool_list.c;/home/kolan/projects/dataserver/dataserver.c;
+recent_projects=/home/kolan/projects/dataserver/dataserver.geany;dataserver.geany;/home/kolan/Projects/cpp/sockets/sockets.geany;/home/kolan/Projects/cpp/multithreading/pthread_ex.geany;/home/kolan/Projects/c/tmp2/tmp2.geany;/home/kolan/Projects/c/tmp1/tmp1.geany;/home/kolan/Projects/CPP/hello/hello.geany;/home/kolan/Projects/CPP/multithreading/pthread_ex.geany;/home/kolan/Projects/C/hello/hello.geany;
+current_page=0
+FILE_NAME_0=6788;C;0;16;1;1;1;/home/kolan/projects/dataserver/dataserver.c;0
+FILE_NAME_1=0;C;0;16;1;1;1;/home/kolan/projects/dataserver/dataserver.h;0
+FILE_NAME_2=0;C;0;16;1;1;1;/home/kolan/projects/dataserver/echo-client.c;0

.config/geany/keybindings.conf

@@ -0,0 +1,245 @@
+#Keybindings for Geany
+#The format looks like "<Control>a" or "<Shift><Alt>F1".
+#But you can also change the keys in Geany's preferences dialog.
+
+[Bindings]
+menu_new=<Control>n
+menu_open=<Control>o
+menu_open_selected=<Shift><Control>o
+menu_save=<Control>s
+menu_saveas=
+menu_saveall=<Shift><Control>s
+menu_print=<Control>p
+menu_close=<Control>w
+menu_closeall=<Shift><Control>w
+menu_reloadfile=<Control>r
+project_properties=
+menu_undo=<Control>z
+menu_redo=<Control>y
+edit_deleteline=<Control>k
+edit_duplicateline=<Control>d
+edit_transposeline=<Control>t
+edit_scrolltoline=<Shift><Control>l
+edit_scrolllineup=<Alt>Up
+edit_scrolllinedown=<Alt>Down
+edit_completesnippet=Tab
+edit_suppresssnippetcompletion=
+move_snippetnextcursor=
+popup_contextaction=
+edit_autocomplete=<Control>space
+edit_calltip=<Shift><Control>space
+edit_macrolist=<Control>Return
+edit_deletelinetoend=<Shift><Control>Delete
+menu_cut=<Control>x
+menu_copy=<Control>c
+menu_paste=<Control>v
+edit_cutline=<Shift><Control>x
+edit_copyline=<Shift><Control>c
+menu_selectall=<Control>a
+edit_selectword=<Shift><Alt>w
+edit_selectline=<Shift><Alt>l
+edit_selectparagraph=<Shift><Alt>p
+edit_togglecase=<Control><Alt>u
+edit_commentlinetoggle=<Control>e
+edit_commentline=
+edit_uncommentline=
+edit_increaseindent=<Control>i
+edit_decreaseindent=<Control>u
+edit_increaseindentbyspace=
+edit_decreaseindentbyspace=
+edit_autoindent=
+edit_sendtocmd1=<Control>1
+edit_sendtocmd2=<Control>2
+edit_sendtocmd3=<Control>3
+edit_sendtovte=
+format_reflowparagraph=<Control>j
+menu_insert_date=<Shift><Alt>d
+edit_insertwhitespace=
+menu_preferences=<Control><Alt>p
+menu_find=<Control>f
+menu_findnext=<Control>g
+menu_findprevious=<Shift><Control>g
+menu_findinfiles=<Shift><Control>f
+menu_replace=<Control>h
+menu_findnextsel=
+menu_findprevsel=
+menu_nextmessage=
+menu_previousmessage=
+popup_findusage=
+popup_finddocumentusage=
+find_markall=<Shift><Control>m
+nav_forward=
+nav_back=
+menu_gotoline=<Control>l
+edit_gotolinestart=Home
+edit_gotolineend=End
+edit_gotomatchingbrace=<Control>b
+edit_togglemarker=<Control>m
+edit_gotonextmarker=<Control>period
+edit_gotopreviousmarker=<Control>comma
+edit_prevwordstart=<Control>slash
+edit_nextwordstart=<Control>backslash
+popup_gototagdefinition=
+popup_gototagdeclaration=
+edit_gotolineendvisual=<Alt>End
+menu_toggleall=
+menu_fullscreen=F11
+menu_messagewindow=
+toggle_sidebar=
+menu_zoomin=<Control>plus
+menu_zoomout=<Control>minus
+switch_editor=F2
+switch_scribble=F6
+switch_vte=F4
+switch_search_bar=F7
+switch_sidebar=
+switch_compiler=
+switch_tableft=<Control>Page_Up
+switch_tabright=<Control>Page_Down
+switch_tablastused=<Control>Tab
+move_tableft=<Alt>Page_Up
+move_tabright=<Alt>Page_Down
+move_tabfirst=
+move_tablast=
+menu_replacetabs=
+menu_replacespaces=
+menu_togglefold=
+menu_foldall=
+menu_unfoldall=
+reloadtaglist=<Shift><Control>r
+menu_linewrap=
+menu_linebreak=
+build_compile=F8
+build_link=F9
+build_make=<Shift>F9
+build_makeowntarget=<Shift><Control>F9
+build_makeobject=
+build_nexterror=
+build_previouserror=
+build_run=F5
+build_run2=
+build_options=
+menu_opencolorchooser=
+menu_help=F1
+
+file_openlasttab=
+edit_wordpartcompletion=Tab
+edit_movelineup=
+edit_movelinedown=
+edit_selectwordpartleft=
+edit_selectwordpartright=
+menu_pluginpreferences=
+normal_size=<Control>0
+switch_messages=
+switch_message_window=
+switch_sidebar_doc_list=
+switch_sidebar_symbol_list=
+remove_markers=
+remove_error_indicators=
+
+[file_browser]
+focus_file_list=
+focus_path_entry=
+
+[split_window]
+split_horizontal=
+split_vertical=
+split_unsplit=
+
+[html_chars]
+insert_html_chars=
+replace_special_characters=
+htmltoogle_toggle_plugin_status=
+
+[code_navigation]
+switch_head_impl=<Shift><Alt>s
+goto_file=<Shift><Alt>g
+
+[extra_select]
+column_mode=
+goto_line_extend=
+brace_match_extend=
+
+[debug]
+"_Load"=
+"_Unload"=
+"_Run"=
+"_Kill"=
+"_Pause"=
+"_Continue"=
+"_Step"=
+"Step _Into"=
+"_Next"=
+"Ne_xt in"=
+"Run _To"=
+"Sta_ck"=
+"_Break"=
+"_Watches"=
+"_Finish"=
+"_Return"=
+"En_vironment"=
+"_Options"=
+
+[geanylatex]
+run_latex_wizard=
+insert_latex_label=
+insert_latex_ref=
+insert_new_line=
+latex_toggle_status=
+latex_insert_environment=
+latex_insert_item=
+latex_replace_chars=
+format_bold=
+format_italic=
+format_typewriter=
+format_center=
+format_left=
+format_right=
+insert_description_list=
+insert_itemize_list=
+insert_enumerate_list=
+structure_lvl_up=
+structure_lvl_down=
+usepackage_dialog=
+latex_insert_command=
+
+[geanylipsum]
+insert_lipsum=
+
+[sendmail]
+send_file_as_attachment=
+
+[geanyvc]
+vc_show_diff_of_file=
+vc_show_diff_of_dir=
+vc_show_diff_of_basedir=
+vc_commit=
+vc_status=
+vc_update=
+vc_revert_file=
+vc_revert_dir=
+vc_revert_basedir=
+
+[insert_numbers]
+insert_numbers=
+
+[spellcheck]
+spell_check=
+spell_toggle_typing=
+
+[prettyprinter]
+run_pretty_printer_xml=
+
+[doc_chars]
+Документация на слово под курсором=
+Document interactive=
+
+[addons]
+focus_bookmark_list=
+focus_tasks=
+update_tasks=
+xml_tagging=
+
+[shiftcolumn]
+shift_left=<Control>9
+shift_right=<Control>0

.config/geeqie/applications/Awesome BG 1.desktop

@@ -0,0 +1,105 @@
+[Desktop Entry]
+Version=1.0
+Type=Application
+
+# The name which appears in the menu:
+Name=Awesome BG 1
+#Name[cs]=Šablona
+#Name[fr]=Modèle
+#Name[de]=Vorlage
+
+# Replace "command" with the actual command or script:
+Exec=rm -f ~/.config/awesome/wallpaper1.slink ; ln -sf "%f" ~/.config/awesome/wallpaper1.slink ;  killall -s SIGHUP awesome
+
+# Where <param> may be:
+# omitted	If no parameter is given the command will be executed in the
+#        current folder. If a parameter is given but the current folder
+#        does not contain any files, the command will not be run.
+#
+# %f	 A single file name, even if multiple files are selected. The
+#        system reading the desktop entry should recognize that the program in
+#        question cannot handle multiple file arguments, and it should should
+#        probably spawn and execute multiple copies of a program for each
+#        selected file if the program is not able to handle additional file
+#        arguments. If files are not on the local file system (i.e. are on HTTP
+#        or FTP locations), the files will be copied to the local file system
+#        and %f will be expanded to point at the temporary file. Used for
+#        programs that do not understand the URL syntax.
+#
+# %F	A list of files. Use for apps that can open several local files
+#       at once. Each file is passed as a separate argument to the executable
+#       program.
+#
+# %u	A single URL. Local files may either be passed as file: URLs or
+#       as file path.
+#
+# %U	A list of URLs. Each URL is passed as a separate argument to
+#       the executable program. Local files may either be passed as file: URLs
+#       or as file path.
+#
+# %%    Percent sign. Use anywhere you want '%' to appear in your command.
+
+# Change the following line to point to an icon of your choosing
+Icon=gtk-file
+
+# Use the following to only show this menu entry if the command is installed
+#TryExec=command
+
+# Desktop files that are usable only in Geeqie should be marked like this:
+Categories=X-Geeqie;
+OnlyShowIn=X-Geeqie;
+
+# Uncomment the following line to include in a Geeqie menu
+# other than in the default path of PluginsMenu
+#X-Geeqie-Menu-Path=<FileMenuPath>
+
+# e.g.
+#X-Geeqie-Menu-Path=SelectMenu/SelectSection
+
+# Valid sections are:
+#    FileMenu
+#    FileMenu/OpenSection
+#    FileMenu/SearchSection
+#    FileMenu/PrintSection
+#    FileMenu/FileOpsSection
+#    FileMenu/QuitSection
+#    GoMenu
+#    SelectMenu
+#    SelectMenu/SelectSection
+#    SelectMenu/ClipboardSection
+#    SelectMenu/MarksSection
+#    EditMenu
+#    EditMenu/EditSection
+#    EditMenu/OrientationMenu
+#    EditMenu/RatingMenu
+#    EditMenu/PropertiesSection
+#    EditMenu/PreferencesSection
+#    PluginsMenu
+#    ViewMenu
+#    ViewMenu/WindowSection
+#    ViewMenu/FileDirMenu
+#    ViewMenu/FileDirMenu/FolderSection
+#    ViewMenu/FileDirMenu/ListSection
+#    ViewMenu/DirSection
+#    ViewMenu/ZoomMenu
+#    ViewMenu/ZoomMenu/ConnectZoomMenu
+#    ViewMenu/SplitMenu
+#    ViewMenu/StereoMenu
+#    ViewMenu/ColorMenu
+#    ViewMenu/OverlayMenu
+#    ViewMenu/ViewSection
+#    ViewMenu/ToolsSection
+#    ViewMenu/SlideShowSection
+#    WindowsMenu
+#    WindowsMenu/NewWindow
+#    HelpMenu
+#    HelpMenu/HelpSection
+
+# This is a filter - see symlink.desktop and geeqie-symlink for an example
+# of how to use this feature, or the Plugins section of the Help file.
+#X-Geeqie-Filter=true
+
+# It can be made verbose
+#X-Geeqie-Verbose=true
+
+# For other keys such as MimeType see https://developer.gnome.org/desktop-entry-spec/

.config/geeqie/applications/Awesome BG 2.desktop

@@ -0,0 +1,105 @@
+[Desktop Entry]
+Version=1.0
+Type=Application
+
+# The name which appears in the menu:
+Name=Awesome BG 2
+#Name[cs]=Šablona
+#Name[fr]=Modèle
+#Name[de]=Vorlage
+
+# Replace "command" with the actual command or script:
+Exec=rm -f ~/.config/awesome/wallpaper2.slink ; ln -sf "%f" ~/.config/awesome/wallpaper2.slink ;  killall -s SIGHUP awesome
+
+# Where <param> may be:
+# omitted	If no parameter is given the command will be executed in the
+#        current folder. If a parameter is given but the current folder
+#        does not contain any files, the command will not be run.
+#
+# %f	 A single file name, even if multiple files are selected. The
+#        system reading the desktop entry should recognize that the program in
+#        question cannot handle multiple file arguments, and it should should
+#        probably spawn and execute multiple copies of a program for each
+#        selected file if the program is not able to handle additional file
+#        arguments. If files are not on the local file system (i.e. are on HTTP
+#        or FTP locations), the files will be copied to the local file system
+#        and %f will be expanded to point at the temporary file. Used for
+#        programs that do not understand the URL syntax.
+#
+# %F	A list of files. Use for apps that can open several local files
+#       at once. Each file is passed as a separate argument to the executable
+#       program.
+#
+# %u	A single URL. Local files may either be passed as file: URLs or
+#       as file path.
+#
+# %U	A list of URLs. Each URL is passed as a separate argument to
+#       the executable program. Local files may either be passed as file: URLs
+#       or as file path.
+#
+# %%    Percent sign. Use anywhere you want '%' to appear in your command.
+
+# Change the following line to point to an icon of your choosing
+Icon=gtk-file
+
+# Use the following to only show this menu entry if the command is installed
+#TryExec=command
+
+# Desktop files that are usable only in Geeqie should be marked like this:
+Categories=X-Geeqie;
+OnlyShowIn=X-Geeqie;
+
+# Uncomment the following line to include in a Geeqie menu
+# other than in the default path of PluginsMenu
+#X-Geeqie-Menu-Path=<FileMenuPath>
+
+# e.g.
+#X-Geeqie-Menu-Path=SelectMenu/SelectSection
+
+# Valid sections are:
+#    FileMenu
+#    FileMenu/OpenSection
+#    FileMenu/SearchSection
+#    FileMenu/PrintSection
+#    FileMenu/FileOpsSection
+#    FileMenu/QuitSection
+#    GoMenu
+#    SelectMenu
+#    SelectMenu/SelectSection
+#    SelectMenu/ClipboardSection
+#    SelectMenu/MarksSection
+#    EditMenu
+#    EditMenu/EditSection
+#    EditMenu/OrientationMenu
+#    EditMenu/RatingMenu
+#    EditMenu/PropertiesSection
+#    EditMenu/PreferencesSection
+#    PluginsMenu
+#    ViewMenu
+#    ViewMenu/WindowSection
+#    ViewMenu/FileDirMenu
+#    ViewMenu/FileDirMenu/FolderSection
+#    ViewMenu/FileDirMenu/ListSection
+#    ViewMenu/DirSection
+#    ViewMenu/ZoomMenu
+#    ViewMenu/ZoomMenu/ConnectZoomMenu
+#    ViewMenu/SplitMenu
+#    ViewMenu/StereoMenu
+#    ViewMenu/ColorMenu
+#    ViewMenu/OverlayMenu
+#    ViewMenu/ViewSection
+#    ViewMenu/ToolsSection
+#    ViewMenu/SlideShowSection
+#    WindowsMenu
+#    WindowsMenu/NewWindow
+#    HelpMenu
+#    HelpMenu/HelpSection
+
+# This is a filter - see symlink.desktop and geeqie-symlink for an example
+# of how to use this feature, or the Plugins section of the Help file.
+#X-Geeqie-Filter=true
+
+# It can be made verbose
+#X-Geeqie-Verbose=true
+
+# For other keys such as MimeType see https://developer.gnome.org/desktop-entry-spec/

.config/geeqie/applications/Awesome BG 3.desktop

@@ -0,0 +1,105 @@
+[Desktop Entry]
+Version=1.0
+Type=Application
+
+# The name which appears in the menu:
+Name=Awesome BG 3
+#Name[cs]=Šablona
+#Name[fr]=Modèle
+#Name[de]=Vorlage
+
+# Replace "command" with the actual command or script:
+Exec=rm -f ~/.config/awesome/wallpaper3.slink ; ln -sf "%f" ~/.config/awesome/wallpaper3.slink ;  killall -s SIGHUP awesome
+
+# Where <param> may be:
+# omitted	If no parameter is given the command will be executed in the
+#        current folder. If a parameter is given but the current folder
+#        does not contain any files, the command will not be run.
+#
+# %f	 A single file name, even if multiple files are selected. The
+#        system reading the desktop entry should recognize that the program in
+#        question cannot handle multiple file arguments, and it should should
+#        probably spawn and execute multiple copies of a program for each
+#        selected file if the program is not able to handle additional file
+#        arguments. If files are not on the local file system (i.e. are on HTTP
+#        or FTP locations), the files will be copied to the local file system
+#        and %f will be expanded to point at the temporary file. Used for
+#        programs that do not understand the URL syntax.
+#
+# %F	A list of files. Use for apps that can open several local files
+#       at once. Each file is passed as a separate argument to the executable
+#       program.
+#
+# %u	A single URL. Local files may either be passed as file: URLs or
+#       as file path.
+#
+# %U	A list of URLs. Each URL is passed as a separate argument to
+#       the executable program. Local files may either be passed as file: URLs
+#       or as file path.
+#
+# %%    Percent sign. Use anywhere you want '%' to appear in your command.
+
+# Change the following line to point to an icon of your choosing
+Icon=gtk-file
+
+# Use the following to only show this menu entry if the command is installed
+#TryExec=command
+
+# Desktop files that are usable only in Geeqie should be marked like this:
+Categories=X-Geeqie;
+OnlyShowIn=X-Geeqie;
+
+# Uncomment the following line to include in a Geeqie menu
+# other than in the default path of PluginsMenu
+#X-Geeqie-Menu-Path=<FileMenuPath>
+
+# e.g.
+#X-Geeqie-Menu-Path=SelectMenu/SelectSection
+
+# Valid sections are:
+#    FileMenu
+#    FileMenu/OpenSection
+#    FileMenu/SearchSection
+#    FileMenu/PrintSection
+#    FileMenu/FileOpsSection
+#    FileMenu/QuitSection
+#    GoMenu
+#    SelectMenu
+#    SelectMenu/SelectSection
+#    SelectMenu/ClipboardSection
+#    SelectMenu/MarksSection
+#    EditMenu
+#    EditMenu/EditSection
+#    EditMenu/OrientationMenu
+#    EditMenu/RatingMenu
+#    EditMenu/PropertiesSection
+#    EditMenu/PreferencesSection
+#    PluginsMenu
+#    ViewMenu
+#    ViewMenu/WindowSection
+#    ViewMenu/FileDirMenu
+#    ViewMenu/FileDirMenu/FolderSection
+#    ViewMenu/FileDirMenu/ListSection
+#    ViewMenu/DirSection
+#    ViewMenu/ZoomMenu
+#    ViewMenu/ZoomMenu/ConnectZoomMenu
+#    ViewMenu/SplitMenu
+#    ViewMenu/StereoMenu
+#    ViewMenu/ColorMenu
+#    ViewMenu/OverlayMenu
+#    ViewMenu/ViewSection
+#    ViewMenu/ToolsSection
+#    ViewMenu/SlideShowSection
+#    WindowsMenu
+#    WindowsMenu/NewWindow
+#    HelpMenu
+#    HelpMenu/HelpSection
+
+# This is a filter - see symlink.desktop and geeqie-symlink for an example
+# of how to use this feature, or the Plugins section of the Help file.
+#X-Geeqie-Filter=true
+
+# It can be made verbose
+#X-Geeqie-Verbose=true
+
+# For other keys such as MimeType see https://developer.gnome.org/desktop-entry-spec/

.config/geeqie/applications/Awesome BG 4.desktop

@@ -0,0 +1,105 @@
+[Desktop Entry]
+Version=1.0
+Type=Application
+
+# The name which appears in the menu:
+Name=Awesome BG 4
+#Name[cs]=Šablona
+#Name[fr]=Modèle
+#Name[de]=Vorlage
+
+# Replace "command" with the actual command or script:
+Exec=rm -f ~/.config/awesome/wallpaper4.slink ; ln -sf "%f" ~/.config/awesome/wallpaper4.slink ;  killall -s SIGHUP awesome
+
+# Where <param> may be:
+# omitted	If no parameter is given the command will be executed in the
+#        current folder. If a parameter is given but the current folder
+#        does not contain any files, the command will not be run.
+#
+# %f	 A single file name, even if multiple files are selected. The
+#        system reading the desktop entry should recognize that the program in
+#        question cannot handle multiple file arguments, and it should should
+#        probably spawn and execute multiple copies of a program for each
+#        selected file if the program is not able to handle additional file
+#        arguments. If files are not on the local file system (i.e. are on HTTP
+#        or FTP locations), the files will be copied to the local file system
+#        and %f will be expanded to point at the temporary file. Used for
+#        programs that do not understand the URL syntax.
+#
+# %F	A list of files. Use for apps that can open several local files
+#       at once. Each file is passed as a separate argument to the executable
+#       program.
+#
+# %u	A single URL. Local files may either be passed as file: URLs or
+#       as file path.
+#
+# %U	A list of URLs. Each URL is passed as a separate argument to
+#       the executable program. Local files may either be passed as file: URLs
+#       or as file path.
+#
+# %%    Percent sign. Use anywhere you want '%' to appear in your command.
+
+# Change the following line to point to an icon of your choosing
+Icon=gtk-file
+
+# Use the following to only show this menu entry if the command is installed
+#TryExec=command
+
+# Desktop files that are usable only in Geeqie should be marked like this:
+Categories=X-Geeqie;
+OnlyShowIn=X-Geeqie;
+
+# Uncomment the following line to include in a Geeqie menu
+# other than in the default path of PluginsMenu
+#X-Geeqie-Menu-Path=<FileMenuPath>
+
+# e.g.
+#X-Geeqie-Menu-Path=SelectMenu/SelectSection
+
+# Valid sections are:
+#    FileMenu
+#    FileMenu/OpenSection
+#    FileMenu/SearchSection
+#    FileMenu/PrintSection
+#    FileMenu/FileOpsSection
+#    FileMenu/QuitSection
+#    GoMenu
+#    SelectMenu
+#    SelectMenu/SelectSection
+#    SelectMenu/ClipboardSection
+#    SelectMenu/MarksSection
+#    EditMenu
+#    EditMenu/EditSection
+#    EditMenu/OrientationMenu
+#    EditMenu/RatingMenu
+#    EditMenu/PropertiesSection
+#    EditMenu/PreferencesSection
+#    PluginsMenu
+#    ViewMenu
+#    ViewMenu/WindowSection
+#    ViewMenu/FileDirMenu
+#    ViewMenu/FileDirMenu/FolderSection
+#    ViewMenu/FileDirMenu/ListSection
+#    ViewMenu/DirSection
+#    ViewMenu/ZoomMenu
+#    ViewMenu/ZoomMenu/ConnectZoomMenu
+#    ViewMenu/SplitMenu
+#    ViewMenu/StereoMenu
+#    ViewMenu/ColorMenu
+#    ViewMenu/OverlayMenu
+#    ViewMenu/ViewSection
+#    ViewMenu/ToolsSection
+#    ViewMenu/SlideShowSection
+#    WindowsMenu
+#    WindowsMenu/NewWindow
+#    HelpMenu
+#    HelpMenu/HelpSection
+
+# This is a filter - see symlink.desktop and geeqie-symlink for an example
+# of how to use this feature, or the Plugins section of the Help file.
+#X-Geeqie-Filter=true
+
+# It can be made verbose
+#X-Geeqie-Verbose=true
+
+# For other keys such as MimeType see https://developer.gnome.org/desktop-entry-spec/

.config/geeqie/applications/Awesome BG.desktop

@@ -0,0 +1,105 @@
+[Desktop Entry]
+Version=1.0
+Type=Application
+
+# The name which appears in the menu:
+Name=Awesome BG
+#Name[cs]=Šablona
+#Name[fr]=Modèle
+#Name[de]=Vorlage
+
+# Replace "command" with the actual command or script:
+Exec=rm -f ~/.config/awesome/wallpaper.slink ; ln -sf "%f" ~/.config/awesome/wallpaper.slink ; ~/.config/awesome/set_wall.sh ~/.config/awesome/wallpaper.slink
+
+# Where <param> may be:
+# omitted	If no parameter is given the command will be executed in the
+#        current folder. If a parameter is given but the current folder
+#        does not contain any files, the command will not be run.
+#
+# %f	 A single file name, even if multiple files are selected. The
+#        system reading the desktop entry should recognize that the program in
+#        question cannot handle multiple file arguments, and it should should
+#        probably spawn and execute multiple copies of a program for each
+#        selected file if the program is not able to handle additional file
+#        arguments. If files are not on the local file system (i.e. are on HTTP
+#        or FTP locations), the files will be copied to the local file system
+#        and %f will be expanded to point at the temporary file. Used for
+#        programs that do not understand the URL syntax.
+#
+# %F	A list of files. Use for apps that can open several local files
+#       at once. Each file is passed as a separate argument to the executable
+#       program.
+#
+# %u	A single URL. Local files may either be passed as file: URLs or
+#       as file path.
+#
+# %U	A list of URLs. Each URL is passed as a separate argument to
+#       the executable program. Local files may either be passed as file: URLs
+#       or as file path.
+#
+# %%    Percent sign. Use anywhere you want '%' to appear in your command.
+
+# Change the following line to point to an icon of your choosing
+Icon=gtk-file
+
+# Use the following to only show this menu entry if the command is installed
+#TryExec=command
+
+# Desktop files that are usable only in Geeqie should be marked like this:
+Categories=X-Geeqie;
+OnlyShowIn=X-Geeqie;
+
+# Uncomment the following line to include in a Geeqie menu
+# other than in the default path of PluginsMenu
+#X-Geeqie-Menu-Path=<FileMenuPath>
+
+# e.g.
+#X-Geeqie-Menu-Path=SelectMenu/SelectSection
+
+# Valid sections are:
+#    FileMenu
+#    FileMenu/OpenSection
+#    FileMenu/SearchSection
+#    FileMenu/PrintSection
+#    FileMenu/FileOpsSection
+#    FileMenu/QuitSection
+#    GoMenu
+#    SelectMenu
+#    SelectMenu/SelectSection
+#    SelectMenu/ClipboardSection
+#    SelectMenu/MarksSection
+#    EditMenu
+#    EditMenu/EditSection
+#    EditMenu/OrientationMenu
+#    EditMenu/RatingMenu
+#    EditMenu/PropertiesSection
+#    EditMenu/PreferencesSection
+#    PluginsMenu
+#    ViewMenu
+#    ViewMenu/WindowSection
+#    ViewMenu/FileDirMenu
+#    ViewMenu/FileDirMenu/FolderSection
+#    ViewMenu/FileDirMenu/ListSection
+#    ViewMenu/DirSection
+#    ViewMenu/ZoomMenu
+#    ViewMenu/ZoomMenu/ConnectZoomMenu
+#    ViewMenu/SplitMenu
+#    ViewMenu/StereoMenu
+#    ViewMenu/ColorMenu
+#    ViewMenu/OverlayMenu
+#    ViewMenu/ViewSection
+#    ViewMenu/ToolsSection
+#    ViewMenu/SlideShowSection
+#    WindowsMenu
+#    WindowsMenu/NewWindow
+#    HelpMenu
+#    HelpMenu/HelpSection
+
+# This is a filter - see symlink.desktop and geeqie-symlink for an example
+# of how to use this feature, or the Plugins section of the Help file.
+#X-Geeqie-Filter=true
+
+# It can be made verbose
+#X-Geeqie-Verbose=true
+
+# For other keys such as MimeType see https://developer.gnome.org/desktop-entry-spec/

.config/gtk-3.0/gtk.css

@@ -0,0 +1,12 @@
+.window-frame {
+  box-shadow: none;
+  margin: 0;
+}
+.scrollbar.vertical slider,
+scrollbar.vertical slider {
+min-width: 12px;
+}
+.scrollbar.horizontal slider,
+scrollbar.horizontal slider {
+min-height: 12px;
+}

.config/gtk-3.0/settings.ini

@@ -0,0 +1,22 @@
+[Settings]
+#gtk-theme-name = Zukitwo
+
+gtk-font-name=Liberation Sans 12
+gtk-toolbar-style=GTK_TOOLBAR_ICONS
+
+gtk-enable-animations = 0
+
+gtk-menu-images=0
+gtk-button-images=0
+
+#gtk-icon-theme-name= oxygen
+#gtk-fallback-icon-theme=oxygen
+
+#gtk-cursor-theme-name = gentoo-silver
+gtk-cursor-theme-size = 24
+
+#gtk-xft-antialias = 1
+#gtk-xft-dpi = 90
+#gtk-xft-hinting = 1
+#gtk-xft-hintstyle = hintslight
+#gtk-xft-rgba = rgb

.config/mc/ini

@@ -101,13 +101,16 @@ filepos_max_saved_entries=1024
 preallocate_space=false
 editor_group_undo=false
 
-editor_drop_selection_on_copy=true
 editor_cursor_after_inserted_block=false
-editor_state_full_filename=false
+
 editor_ask_filename_before_edit=false
 editor_filesize_threshold=64M
+
+editor_drop_selection_on_copy=true
 editor_stop_format_chars=-+*\\,.;:&>
 
+editor_state_full_filename=false
+
 safe_overwrite=false
 
 shadows=true
@@ -193,6 +196,9 @@ select_flags=6
 
 panel_scroll_center=false
 
+[HotlistConfig]
+expanded_view_of_groups=0
+
 [Panelize]
 Найти корректуры, отвергнутые командой patch=find . -name \\*.rej -print
 Найти оригиналы (*.orig) после команды patch=find . -name \\*.orig -print

.config/mpv/config

@@ -0,0 +1,13 @@
+# Write your default config options here!
+[default]
+stop-screensaver="yes"
+#heartbeat-cmd="xscreensaver-command -deactivate &"
+
+save-position-on-quit=yes
+#subcp=enca:ru:utf8
+#hwdec=vaapi
+#hwdec=vdpau
+#fullscreen=yes
+vo=gpu
+
+#osd-status-msg=${playback-time/full} / ${duration} (${percent-pos}%)\nframe: ${estimated-frame-number} / ${estimated-frame-count}

.config/mpv/input.conf

@@ -0,0 +1,4 @@
+Esc quit
+Enter quit
+WHEEL_UP seek 1
+WHEEL_DOWN seek -1

.config/tumbler/tumbler.rc

@@ -0,0 +1,97 @@
+###
+# [TypeNameOfPlugin]
+# Disabled:    Set to true to avoid loading the plugin. By default all
+#              plugins are loaded.
+# Priority:    Priority of the plugin if more plugins support the same
+#              uri-scheme / mime-type combination.
+# Locations:   ;-separated path list the plugin will be used in. If the
+#              source file is not a child of one of the locations, the
+#              plugin won't be used and another plugin with a lower
+#              priority will be tried.
+#              Absolute paths, environement variables, ~/ and ~username/
+#              are allowed. Leave empty to allow all locations.
+# MaxFileSize: Maximum size of the source file the plugin will still
+#              try to generate a plugin for. The size is in bytes,
+#              0 disabled the check.
+#
+# For more information see http://docs.xfce.org/xfce/thunar/tumbler
+###
+
+###
+# Image Thumbnailers
+###
+
+# Jpeg thumbnailer (from exif data if possible)
+[JPEGThumbnailer]
+Disabled=false
+Priority=3
+Locations=
+MaxFileSize=0
+
+# Supports all type GdkPixbuf supports
+[PixbufThumbnailer]
+Disabled=false
+Priority=2
+Locations=
+MaxFileSize=0
+
+# RAW image files using libopenraw
+[RawThumbnailer]
+Disabled=false
+Priority=1
+Locations=
+MaxFileSize=0
+
+###
+# Video Thumbnailers
+###
+
+# Download cover from omdbapi.com or themoviedb.org if an
+# API key is given. This plugin is disabled because it
+# sends your (private) movie names over the internet.
+[CoverThumbnailer]
+Disabled=true
+Priority=3
+Locations=~/movies
+MaxFileSize=0
+#APIKey=your-api-key-from-themoviedb.org
+
+# ffmpegthumbnailer plugin
+[FfmegThumbnailer]
+Disabled=false
+Priority=2
+Locations=
+MaxFileSize=0
+
+# GStreamer plugin
+[GstThumbnailer]
+Disabled=true
+Priority=1
+Locations=
+MaxFileSize=0
+
+###
+# Other Thumbnailers
+###
+
+# FreeType thumbnailer
+[FontThumbnailer]
+Disabled=false
+Priority=1
+Locations=
+MaxFileSize=0
+
+
+# PDF/PS thumbnailer
+[PopplerThumbnailer]
+Disabled=false
+Priority=1
+Locations=
+MaxFileSize=0
+
+# Open document thumbnailer (ODF)
+[OdfThumbnailer]
+Disabled=false
+Priority=1
+Locations=
+MaxFileSize=0

.config/user-dirs.dirs

@@ -0,0 +1,8 @@
+XDG_DESKTOP_DIR="$HOME/.big/tmp/desktop/"
+XDG_DOCUMENTS_DIR="$HOME/.big/tmp/documents"
+XDG_MUSIC_DIR="$HOME/.big/tmp/music"
+XDG_PICTURES_DIR="$HOME/.big/tmp/pictures"
+XDG_VIDEOS_DIR="$HOME/.big/tmp/videos"
+XDG_DOWNLOAD_DIR="$HOME/.big/download"
+XDG_TEMPLATES_DIR="$HOME/.big/templates"
+XDG_PUBLICSHARE_DIR="$HOME/.big/shares"

.fonts/Xdefaults

@@ -0,0 +1,6 @@
+! Xft.dpi: 99.0
+Xft.rgba: none
+Xft.antialias: true
+Xft.autohint: false
+Xft.hinting: true
+Xft.hintstyle: hintfull

.gqview/gqviewrc

@@ -0,0 +1,243 @@
+######################################################################
+#                         GQview config file         version   2.1.5 #
+######################################################################
+
+# Note: This file is autogenerated. Options can be changed here,
+#       but user comments and formatting will be lost.
+
+##### General Options #####
+
+layout_style: 0
+
+layout_order: "123"
+
+layout_view_as_icons: true
+
+layout_view_as_tree: true
+
+show_icon_names: true
+
+
+tree_descend_folders: false
+
+lazy_image_sync: false
+
+update_on_time_change: true
+
+exif_auto_rotate: true
+
+
+enable_startup_path: false
+
+startup_path: 
+
+zoom_mode: fit
+two_pass_scaling: true
+
+zoom_to_fit_allow_expand: true
+
+
+fit_window_to_image: true
+
+limit_window_size: false
+
+max_window_size: 100
+
+
+progressive_keyboard_scrolling: false
+
+scroll_reset_method: 0
+
+
+enable_thumbnails: false
+
+thumbnail_width: 96
+
+thumbnail_height: 72
+
+cache_thumbnails: true
+
+cache_thumbnails_into_dirs: false
+
+thumbnail_fast: true
+
+use_xvpics_thumbnails: true
+
+thumbnail_spec_standard: true
+
+
+local_metadata: false
+
+
+sort_method: 1
+
+sort_ascending: true
+
+sort_case_sensitive: false
+
+
+confirm_delete: true
+
+enable_delete_key: true
+
+safe_delete: false
+
+safe_delete_path: "/home/kolan/.gqview/trash"
+safe_delete_size: 20
+
+
+tools_float: false
+
+tools_hidden: false
+
+restore_tool_state: false
+
+toolbar_hidden: false
+
+mouse_wheel_scrolls: false
+
+in_place_rename: true
+
+open_recent_max: 10
+
+image_cache_size_max: 10
+
+thumbnail_quality: 1
+
+zoom_quality: 2
+
+dither_quality: 1
+
+zoom_increment: 5
+
+enable_read_ahead: true
+
+display_dialogs_under_mouse: false
+
+black_window_background: false
+
+fullscreen_screen: -1
+
+fullscreen_clean_flip: false
+
+fullscreen_disable_saver: true
+
+fullscreen_above: false
+
+custom_similarity_threshold: 99
+
+
+##### Slideshow Options #####
+
+slideshow_delay: 15.0
+
+slideshow_random: false
+
+slideshow_repeat: false
+
+
+##### Filtering Options #####
+
+show_dotfiles: false
+
+disable_filtering: false
+
+filter_ext: "icns" ".icns" "Формат изображений ICNS"
+filter_ext: "gif" ".gif" "Формат изображений GIF"
+filter_ext: "bmp" ".bmp" "Формат изображений BMP"
+filter_ext: "pnm" ".pnm;.pbm;.pgm;.ppm" "Семейство форматов изображений PNM/PBM/PGM/PPM"
+filter_ext: "ico" ".ico;.cur" "Формат изображений ICO"
+filter_ext: "ani" ".ani" "Формат изображений ANI"
+filter_ext: "tga" ".tga;.targa" "Формат изображений Targa"
+filter_ext: "ras" ".ras" "Формат растровых изображений компании Sun"
+filter_ext: "jpeg" ".jpeg;.jpe;.jpg" "Формат изображений JPEG"
+filter_ext: "qtif" ".qtif;.qif" "Формат изображений QTIF"
+filter_ext: "xbm" ".xbm" "Формат изображений XBM"
+filter_ext: "pcx" ".pcx" "Формат изображений PCX"
+filter_ext: "xpm" ".xpm" "Формат изображения XPM"
+filter_ext: "wbmp" ".wbmp" "Формат изображений WBMP"
+filter_ext: "png" ".png" "Формат изображений PNG"
+filter_ext: "#tiff" ".tif;.tiff" "Tiff"
+filter_ext: "#svg" ".svg" "Scalable Vector Graphics"
+filter_ext: "crw" ".crw;.cr2" "Canon raw format"
+filter_ext: "raf" ".raf" "Fujifilm raw format"
+filter_ext: "nef" ".nef" "Nikon raw format"
+filter_ext: "orf" ".orf" "Olympus raw format"
+filter_ext: "pef" ".pef" "Pentax raw format"
+
+##### Color Profiles #####
+
+# NOTICE: GQview was not built with support for color profiles,
+#         color profile options will have no effect.
+
+color_profile_enabled: false
+
+color_profile_use_image: true
+
+color_profile_input_type: 0
+
+color_profile_input_file_1: 
+color_profile_input_name_1: 
+color_profile_input_file_2: 
+color_profile_input_name_2: 
+color_profile_input_file_3: 
+color_profile_input_name_3: 
+color_profile_input_file_4: 
+color_profile_input_name_4: 
+
+color_profile_screen_type: 0
+
+color_profile_screen_file_1: 
+
+##### External Programs #####
+# Maximum of 10 programs (external_1 through external_10)
+# format: external_n: "menu name" "command line"
+
+external_1: "The Gimp" "gimp -n %f"
+external_2: "XV" "xv %f"
+external_3: "Xpaint" "xpaint %f"
+external_4: "Awesome BG" "rm ~/.config/awesome/wallpaper.slink; ln -sf %f ~/.config/awesome/wallpaper.slink && ~/.config/awesome/set_wall.sh ~/.config/awesome/wallpaper.slink"
+external_5: "Awesome 1 BG" "rm ~/.config/awesome/wallpaper1.slink; ln -sf %f ~/.config/awesome/wallpaper1.slink; killall -s SIGHUP awesome"
+external_6: "Awesome 2 BG" "rm ~/.config/awesome/wallpaper2.slink; ln -sf %f ~/.config/awesome/wallpaper2.slink; killall -s SIGHUP awesome"
+external_7: "Awesome 3 BG" "rm ~/.config/awesome/wallpaper3.slink; ln -sf %f ~/.config/awesome/wallpaper3.slink; killall -s SIGHUP awesome"
+external_8: "" ""
+external_9: "Повернуть jpeg по часовой стрелк" "%vif jpegtran -rotate 90 -copy all -outfile %p_tmp %p; then mv %p_tmp %p;else rm %p_tmp;fi"
+external_10: "Повернуть jpeg против часовой ст" "%vif jpegtran -rotate 270 -copy all -outfile %p_tmp %p; then mv %p_tmp %p;else rm %p_tmp;fi"
+
+##### Collection Options #####
+
+rectangular_selections: false
+
+
+##### Window Positions #####
+
+restore_window_positions: false
+
+
+main_window_x: 219
+
+main_window_y: 43
+
+main_window_width: 700
+
+main_window_height: 500
+
+main_window_maximized: false
+
+float_window_x: 0
+
+float_window_y: 0
+
+float_window_width: 260
+
+float_window_height: 450
+
+float_window_divider: 200
+
+divider_position_h: 270
+
+divider_position_v: 200
+
+######################################################################
+#                      end of GQview config file                     #
+######################################################################

.gtkrc-2.0

@@ -1,16 +1,18 @@
 # -- THEME AUTO-WRITTEN DO NOT EDIT
-include "/usr/share/themes/Equinox/gtk-2.0/gtkrc"
+include "/usr/share/themes/Adwaita/gtk-2.0/gtkrc"
 
 style "user-font" {
-	font_name = "Liberation Sans 8"
+	font_name = "Liberation Sans 12"
 }
 
 widget_class "*" style "user-font"
 
-gtk-font-name="Liberation Sans 8"
+gtk-font-name="Liberation Sans 12"
 
-gtk-theme-name  = "Equinox"
+gtk-theme-name  = "Adwaita"
 
 include "/home/kolan/.gtkrc.mine"
 
+#gtk-cursor-theme-name = "gentoo-silver"
+
 # -- THEME AUTO-WRITTEN DO NOT EDIT

.hgrc

@@ -5,6 +5,7 @@ username = Kolan Sh <backbone@backbone.ws>
 bitbucket.org=3f:d3:c5:17:23:3c:cd:f5:2d:17:76:06:93:7e:ee:97:42:21:14:aa
 hg.backbone.ws=1d:5d:e2:95:c6:ee:1a:63:9a:9b:09:79:f6:30:a9:2a:50:7d:4e:09
 hg.insysltd.ru=ec:ff:06:cf:59:88:ae:58:eb:f4:79:30:56:f7:36:c2:dd:52:a9:41
+hg.insysltd.org=ec:ff:06:cf:59:88:ae:58:eb:f4:79:30:56:f7:36:c2:dd:52:a9:41
 
 [ui]
 verbose = true

.local/share/Trash

@@ -0,0 +1 @@
+/dev/null

.mplayer/config

@@ -0,0 +1,19 @@
+[default]
+# Write your default config options here!
+#heartbeat-cmd="(nice -n 20 /usr/bin/xscreensaver-command -deactivate >/dev/null 2>&1)&"
+#heartbeat-cmd="xset dpms force on"
+heartbeat-cmd="xscreensaver-command -deactivate"
+#stop-xscreensaver=no
+audiofile-cache=5000
+cache=16000
+cache-min=30
+cache-seek-min=30
+#af=equalizer=5:5:5:0:0:0:-2:-2:-2
+
+
+[gnome-mplayer]
+#vo=vdpau
+ao=alsa
+alang=Russian,rus,ru
+slang=Russian,rus,ru
+msglevel=all=5

.urxvt/Xdefaults

@@ -0,0 +1,33 @@
+URxvt.cursorBlink:      true
+URxvt*font:-xos4-terminus-medium-r-normal--14-*-*-*-*-*-*
+URxvt*scrollstyle:      next
+URxvt.url-launcher:      firefox
+URxvt.matcher.button:   1
+URxvt.colorUL:          blue
+URxvt*saveLines:        32768
+URxvt.tabbed.tabbar-fg:     7
+URxvt.tabbed.tabbar-bg:     8
+URxvt.tabbed.tab-fg:        0
+URxvt.tabbed.tab-bg:        15
+URxvt.geometry:         96x32
+URxvt*perl-ext: tabbedex,matcher
+
+URxvt*color0: #444444
+URxvt*color1: #aa0000
+URxvt*color2: #00aa00
+URxvt*color3: #999900
+URxvt*color4: #0000aa
+URxvt*color5: #990099
+URxvt*color6: #009999
+URxvt*color7: grey
+
+URxvt*color8: #1E2320
+URxvt*color9: #cc0000
+URxvt*color10: #00cc00
+URxvt*color11: #bbbb00
+URxvt*color12: #0000cc
+URxvt*color13: #bb00bb
+URxvt*color14: #00bbbb
+URxvt*color15: white
+
+Xcursor.size: 24

.urxvt/ext/tabbedex

@@ -0,0 +1,697 @@
+#! perl
+# This program is free software: you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation, either version 3 of the License, or
+# (at your option) any later version.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+##
+## Tabbed plugin for rxvt-unicode
+## Modified by Michal Nazarewicz (mina86/AT/mina86.com), StephenB
+## (mail4stb/AT/gmail.com), Steven Merrill
+## <steven dot merrill at gmail.com>, Mark Pustjens
+## <pustjens@dds.nl> and more...
+##
+## The following has been added:
+##
+## 1. Depending on time of last activity, activity character differs.
+##    By default, after 4 seconds an asterisk becomes a plus sing,
+##    after next 4 it becomes a colon, and finally, after another 8
+##    seconds it becomes a dot.  This can be configured via
+##    tabbar-timeouts resource.  It's format is:
+##
+##      ( <timeout> ":" <character> ":" )* <timeout> ":" <character> ":"
+##
+##    where <timeout> is timeout in seconds and <character> is
+##    a single activity character.
+##
+## 2. The "[NEW]" button can be disabled (who on Earth uses mouse to
+##    create new tab anyways?) by setting new-button resource to yes.
+##
+## 3. If title resource is true, tab's title is displayed after last
+##    button.  This is handy if you have terminal with no window
+##    decorations.  Colours can be configured via title-fg and
+##    title-bg.
+##
+## 4. Incorporated Alexey Semenko <asemenko at gmail.com> patch adding
+##    autohide resource.  If it's true tab bar is hidden if there is
+##    no more then one tab opened.
+##
+## 5. Tabs are indexed in starting with zero hex. :] If you're such
+##    a geek to use urxvt it shouldn't be a problem for you and it
+##    saves few character when many tabs are opened.
+##
+## 6. As a minor modification: Final pipe character is removed (unless
+##    title is displayed).  This make tab bar look nicer.
+##
+## Added by StephenB:
+## 
+## 7. Tabs can be named with Shift+Up (Enter to confirm, Escape to
+##    cancel).
+##
+## 8. "[NEW]" button disabled by default.
+##
+## Added by Steven Merrill <steven dot merrill at gmail.com>
+##
+## 9. Ability to start a new tab or cycle through tabs via user
+##    commands: tabbedex:(new|next|prev)_tab .
+##    e.g. (in .Xdefaults) URxvt.keysym.M-t: perl:tabbedex:new_tab
+##    (see the urxvt man file for more info about keysym)
+##
+## 10. Fix an issue whereby on_user_command would not properly get sent
+##     to other extension packages if the mouse was not over the urxvt
+##     window.
+##
+## Added by Thomas Jost:
+##
+## 11. Add several user commands: tabbedex:rename_tab,
+##     tabbedex:move_tab_(left|right).
+##     e.g. (see 9.) URxvt.keysym.C-S-Left: perl:tabbex:move_tab_left
+##
+## 12. Ability to disable the default keybindings using the
+##     no-tabbedex-keys resource.
+##
+## Added by xanf (Illya Klymov):
+##
+## 13. Ability to display non-latin characters in tab title.
+##
+## Added by jpkotta:
+##
+## 14. Tabs inherit command line options.
+##
+## Added by Mark Pustjens <pustjens@dds.nl>
+##
+## 15. Resources are now read respecting the -name option.
+##
+## 16. Ability to prevent the last tab from closing.
+##     Use the following in your ~/.Xdefaults to enable:
+##     URXvt.tabbed.reopen-on-close: yes
+##
+
+use Encode qw(decode);
+
+sub update_autohide {
+   my ($self, $reconfigure) = @_;
+   my $oldh = $self->{tabheight};
+   if ($self->{autohide} && @{ $self->{tabs} } <= 1 &&
+         ! (@{ $self->{tabs} } == 1 && $self->{tabs}[-1]->{name})) {
+      $self->{tabheight} = 0;
+   } else {
+      $self->{tabheight} = $self->{maxtabheight};
+   }
+   if ($reconfigure && $self->{tabheight} != $oldh) {
+      $self->configure;
+      $self->copy_properties;
+   }
+}
+
+
+sub tab_activity_mark ($$) {
+   my ($self, $tab) = @_;
+   return ' ' unless defined $tab->{lastActivity};
+   return ' ' if $tab == $self->{cur};
+   if (defined $self->{timeouts}) {
+      my $diff = int urxvt::NOW - $tab->{lastActivity};
+      for my $spec (@{ $self->{timeouts} }) {
+         return $spec->[1] if $diff > $spec->[0];
+      }
+   }
+   '*';
+}
+
+
+sub refresh {
+   my ($self) = @_;
+
+   # autohide makes it zero
+   return unless $self->{tabheight};
+
+   my $ncol = $self->ncol;
+
+   my $text = " " x $ncol;
+   my $rend = [($self->{rs_tabbar}) x $ncol];
+
+   my ($ofs, $idx, @ofs) = (0, 0);
+
+   if ($self->{new_button}) {
+      substr $text, 0, 7, "[NEW] |";
+      @$rend[0 .. 5] = ($self->{rs_tab}) x 6;
+      push @ofs, [0, 6, -1 ];
+      $ofs = 7;
+   }
+
+   for my $tab (@{ $self->{tabs} }) {
+      my $name = $tab->{name} ? $tab->{name} : $idx;
+      my $act = $self->tab_activity_mark($tab);
+      my $txt = sprintf "%s%s%s", $act, $name, $act;
+      my $len = length $txt;
+
+      substr $text, $ofs, $len + 1, "$txt|";
+      @$rend[$ofs .. $ofs + $len - 1] = ($self->{rs_tab}) x $len
+         if $tab == $self->{cur};
+
+      push @ofs, [ $ofs, $ofs + $len, $idx ];
+      ++$idx;
+      $ofs += $len + 1;
+   }
+
+   substr $text, --$ofs, 1, ' '; # remove last '|'
+
+   if ($self->{tab_title} && $ofs + 3 < $ncol) {
+      my $term = $self->{term};
+      my @str = $term->XGetWindowProperty($term->parent, $self->{tab_title});
+      if (@str && $str[2]) {
+         my $str = '| ' . decode("utf8", $str[2]);
+         my $len = length $str;
+         $len = $ncol - $ofs if $ofs + $len > $ncol;
+         substr $text, $ofs, $len, substr $str, 0, $len;
+         @$rend[$ofs + 2 .. $ofs + $len - 1] = ($self->{rs_title}) x ($len - 2);
+      }
+   }
+
+   $self->{tabofs} = \@ofs;
+
+   $self->ROW_t (0, $text, 0, 0, $ncol);
+   $self->ROW_r (0, $rend, 0, 0, $ncol);
+
+   $self->want_refresh;
+}
+
+
+sub new_tab {
+   my ($self, @argv) = @_;
+
+   my $offset = $self->fheight;
+
+   $self->{tabheight} = $self->{maxtabheight}
+   unless $self->{autohide} && !(defined $self->{tabs} && @{ $self->{tabs} });
+
+   # save a backlink to us, make sure tabbedex is inactive
+   push @urxvt::TERM_INIT, sub {
+      my ($term) = @_;
+      $term->{parent} = $self;
+
+      for (0 .. urxvt::NUM_RESOURCES - 1) {
+         my $value = $self->{resource}[$_];
+
+         $term->resource ("+$_" => $value)
+            if defined $value;
+      }
+
+      $term->resource (perl_ext_2 => $term->resource ("perl_ext_2") . ",-tabbedex");
+   };
+
+   push @urxvt::TERM_EXT, urxvt::ext::tabbedex::tab::;
+
+   my $term = new urxvt::term
+      $self->env, $urxvt::RXVTNAME,
+      -embed => $self->parent,
+      @argv;
+}
+
+
+sub configure {
+   my ($self) = @_;
+
+   my $tab = $self->{cur};
+
+   # this is an extremely dirty way to force a configurenotify, but who cares
+   $tab->XMoveResizeWindow (
+      $tab->parent,
+      0, $self->{tabheight} + 1,
+      $self->width, $self->height - $self->{tabheight}
+   );
+   $tab->XMoveResizeWindow (
+      $tab->parent,
+      0, $self->{tabheight},
+      $self->width, $self->height - $self->{tabheight}
+   );
+}
+
+
+sub copy_properties {
+   my ($self) = @_;
+   my $tab = $self->{cur};
+
+   my $wm_normal_hints = $self->XInternAtom ("WM_NORMAL_HINTS");
+
+   my $current = delete $self->{current_properties};
+
+   # pass 1: copy over properties different or nonexisting
+   for my $atom ($tab->XListProperties ($tab->parent)) {
+      my ($type, $format, $items) = $self->XGetWindowProperty ($tab->parent, $atom);
+
+      # fix up size hints
+      if ($atom == $wm_normal_hints) {
+         my (@hints) = unpack "l!*", $items;
+
+         $hints[$_] += $self->{tabheight} for (4, 6, 16);
+
+         $items = pack "l!*", @hints;
+      }
+
+      my $cur = delete $current->{$atom};
+
+      # update if changed, we assume empty items and zero type and format will not happen
+      $self->XChangeProperty ($self->parent, $atom, $type, $format, $items)
+         if $cur->[0] != $type or $cur->[1] != $format or $cur->[2] ne $items;
+
+      $self->{current_properties}{$atom} = [$type, $format, $items];
+   }
+
+   # pass 2, delete all extraneous properties
+   $self->XDeleteProperty ($self->parent, $_) for keys %$current;
+}
+
+
+sub my_resource {
+   my $self = shift;
+   $self->x_resource ("tabbed.$_[0]");
+}
+
+
+sub make_current {
+   my ($self, $tab) = @_;
+
+   if (my $cur = $self->{cur}) {
+      delete $cur->{lastActivity};
+      $cur->XUnmapWindow ($cur->parent) if $cur->mapped;
+      $cur->focus_out;
+   }
+
+   $self->{cur} = $tab;
+
+   $self->configure;
+   $self->copy_properties;
+
+   $tab->focus_out; # just in case, should be a nop
+   $tab->focus_in if $self->focus;
+
+   $tab->XMapWindow ($tab->parent);
+   delete $tab->{lastActivity};
+   $self->refresh;
+
+   ();
+}
+
+
+sub on_focus_in {
+   my ($self, $event) = @_;
+   $self->{cur}->focus_in;
+   ();
+}
+
+sub on_focus_out {
+   my ($self, $event) = @_;
+   $self->{cur}->focus_out;
+   ();
+}
+
+sub on_key_press {
+   my ($self, $event) = @_;
+   $self->{cur}->key_press ($event->{state}, $event->{keycode}, $event->{time});
+   1;
+}
+
+sub on_key_release {
+   my ($self, $event) = @_;
+   $self->{cur}->key_release ($event->{state}, $event->{keycode}, $event->{time});
+   1;
+}
+
+sub on_button_release {
+   my ($self, $event) = @_;
+
+   if ($event->{row} == 0) {
+      my $col = $event->{col};
+      for my $button (@{ $self->{tabofs} }) {
+         last if     $col <  $button->[0];
+         next unless $col <= $button->[1];
+         if ($button->[2] == -1) {
+            $self->new_tab;
+         } else {
+            $self->make_current($self->{tabs}[$button->[2]]);
+         }
+      }
+      return 1;
+   }
+
+   ();
+}
+
+sub on_init {
+   my ($self) = @_;
+
+   $self->{resource} = [map $self->resource ("+$_"), 0 .. urxvt::NUM_RESOURCES - 1];
+
+   $self->resource (int_bwidth => 0);
+   $self->resource (pty_fd => -1);
+
+   $self->{option} = {};
+   for my $key (keys %urxvt::OPTION) {
+       $self->{option}{$key} = $self->option($urxvt::OPTION{$key});
+   }
+
+   # this is for the tabs terminal; order is important
+   $self->option ($urxvt::OPTION{scrollBar}, 0);
+
+   my $fg    = $self->my_resource ("tabbar-fg");
+   my $bg    = $self->my_resource ("tabbar-bg");
+   my $tabfg = $self->my_resource ("tab-fg");
+   my $tabbg = $self->my_resource ("tab-bg");
+   my $titfg = $self->my_resource ("title-fg");
+   my $titbg = $self->my_resource ("title-bg");
+
+   defined $fg    or $fg    = 3;
+   defined $bg    or $bg    = 0;
+   defined $tabfg or $tabfg = 0;
+   defined $tabbg or $tabbg = 1;
+   defined $titfg or $titfg = 15;
+   defined $titbg or $titbg = 8;
+
+   $self->{rs_tabbar} = urxvt::SET_COLOR (urxvt::DEFAULT_RSTYLE, $fg    + 2, $bg    + 2);
+   $self->{rs_tab}    = urxvt::SET_COLOR (urxvt::DEFAULT_RSTYLE, $tabfg + 2, $tabbg + 2);
+   $self->{rs_title}  = urxvt::SET_COLOR (urxvt::DEFAULT_RSTYLE, $titfg + 2, $titbg + 2);
+
+
+   my $timeouts = $self->my_resource ("tabbar-timeouts");
+   $timeouts = '16:.:8:::4:+' unless defined $timeouts;
+   if ($timeouts ne '') {
+      my @timeouts;
+      while ($timeouts =~ /^(\d+):(.)(?::(.*))?$/) {
+         push @timeouts, [ int $1, $2 ];
+         $timeouts = defined $3 ? $3 : '';
+      }
+      if (@timeouts) {
+         $self->{timeouts} = [ sort { $b->[0] <=> $a-> [0] } @timeouts ];
+      }
+   }
+
+   $self->{new_button} =
+      ($self->my_resource ('new-button') or 'false') !~ /^(?:false|0|no)/i;
+   $self->{tab_title} =
+      ($self->my_resource ('title') or 'true') !~ /^(?:false|0|no)/i;
+   $self->{autohide} =
+      ($self->my_resource ('autohide') or 'false') !~ /^(?:false|0|no)/i;
+   $self->{no_default_keys} =
+      ($self->my_resource ('no-tabbedex-keys') or 'false') !~ /^(?:false|0|no)/i;
+    $self->{reopen_on_close} =
+      ($self->my_resource ('reopen-on-close') or 'false') !~ /^(?:false|0|no)/i;
+
+   ();
+}
+
+
+sub on_start {
+   my ($self) = @_;
+
+   $self->{maxtabheight} = $self->int_bwidth + $self->fheight + $self->lineSpace;
+   $self->{tabheight} = $self->{autohide} ? 0 : $self->{maxtabheight};
+
+   $self->{running_user_command} = 0;
+
+   $self->cmd_parse ("\033[?25l");
+
+   my @argv = $self->argv;
+
+   do {
+      shift @argv;
+   } while @argv && $argv[0] ne "-e";
+
+   if ($self->{tab_title}) {
+      $self->{tab_title} = $self->{term}->XInternAtom("_NET_WM_NAME", 1);
+   }
+
+   $self->new_tab (@argv);
+
+   if (defined $self->{timeouts}) {
+      my $interval = ($self->{timeouts}[@{ $self->{timeouts} } - 1]->[0]);
+      $interval = int($interval / 4);
+      $self->{timer} = urxvt::timer->new
+                                   ->interval($interval < 1 ? 1 : $interval)
+                                   ->cb ( sub { $self->refresh; } );
+   }
+
+   ();
+}
+
+
+sub on_configure_notify {
+   my ($self, $event) = @_;
+
+   $self->configure;
+   $self->refresh;
+
+   ();
+}
+
+
+sub on_user_command {
+  my ($self, $event) = @_;
+
+  $self->{cur}->{term}->{parent}->tab_user_command($self->{cur}, $event, 1);
+
+  ();
+}
+
+
+sub on_wm_delete_window {
+   my ($self) = @_;
+   $_->destroy for @{ $self->{tabs} };
+   1;
+}
+
+
+sub tab_start {
+   my ($self, $tab) = @_;
+
+   $tab->XChangeInput ($tab->parent, urxvt::PropertyChangeMask);
+
+   push @{ $self->{tabs} }, $tab;
+
+#   $tab->{name} ||= scalar @{ $self->{tabs} };
+   $self->make_current ($tab);
+
+   ();
+}
+
+
+sub tab_destroy {
+   my ($self, $tab) = @_;
+
+   if ($self->{reopen_on_close} && $#{ $self->{tabs} } == 0) {
+      $self->new_tab;
+      $self->make_current ($self->{tabs}[-1]);
+   }
+
+   $self->{tabs} = [ grep $_ != $tab, @{ $self->{tabs} } ];
+   $self->update_autohide ();
+
+   if (@{ $self->{tabs} }) {
+      if ($self->{cur} == $tab) {
+         delete $self->{cur};
+         $self->make_current ($self->{tabs}[-1]);
+      } else {
+         $self->refresh;
+      }
+   } else {
+      # delay destruction a tiny bit
+      $self->{destroy} = urxvt::iw->new->start->cb (sub { $self->destroy });
+   }
+
+   ();
+}
+
+
+sub tab_key_press {
+   my ($self, $tab, $event, $keysym, $str) = @_;
+
+   # setting binding keys
+   #open FILE, ">/tmp/key.txt" or die $!;
+   #printf FILE $keysym;
+   #close FILE;
+
+   if ($tab->{is_inputting_name}) {
+      if ($keysym == 0xff0d || $keysym == 0xff8d) { # enter
+         $tab->{name} = $tab->{new_name};
+         $tab->{is_inputting_name} = 0;
+         $self->update_autohide (1);
+      } elsif ($keysym == 0xff1b) { # escape
+         $tab->{name} = $tab->{old_name};
+         $tab->{is_inputting_name} = 0;
+         $self->update_autohide (1);
+      } elsif ($keysym == 0xff08) { # backspace
+         substr $tab->{new_name}, -1, 1, "";
+         $tab->{name} = "$tab->{new_name}█";
+      } elsif ($str !~ /[\x00-\x1f\x80-\xaf]/) {
+         $tab->{new_name} .= $str;
+         $tab->{name} = "$tab->{new_name}█";
+      }
+      $self->refresh;
+      return 1;
+   }
+
+   return () if ($self->{no_default_keys});
+
+   if ($event->{state} & urxvt::ControlMask) {
+      if ($keysym == 0x004a || $keysym == 0x006a) {
+         if (@{ $self->{tabs} } > 1) {
+            $self->change_tab($tab, -1);
+         }
+         return 1;
+
+      } elsif ($keysym == 0x004b || $keysym == 0x006b) {
+         if (@{ $self->{tabs} } > 1) {
+            $self->change_tab($tab, 1);
+         }
+         return 1;
+      } elsif ($keysym == 0x003b) {
+         $self->new_tab;
+         return 1;
+
+      } elsif ($keysym == 0xff52) {
+         $self->rename_tab($tab);
+         return 1;
+      } elsif ($keysym == 0x0047 || $keysym == 0x0067) {
+         $self->move_tab($tab, 1);
+         return 1;
+      } elsif ($keysym == 0x0048 || $keysym == 0x0068) {
+         $self->move_tab($tab, -1);
+         return 1;
+      } elsif ($keysym == 0x0044) {
+         $tab->destroy;
+         return 1;
+      } elsif ($keysym == 0x0054 || $keysym == 0x0074) {
+         $tab->{is_inputting_name} = 1;
+         $tab->{old_name} = $tab->{name} ? $tab->{name} : "";
+         $tab->{new_name} = "";
+         $tab->{name} = "█";
+         $self->update_autohide (1);
+         $self->refresh;
+         return 1;
+      }
+
+
+   }
+
+   ();
+}
+
+
+sub tab_property_notify {
+   my ($self, $tab, $event) = @_;
+
+   $self->copy_properties
+      if $event->{window} == $tab->parent;
+
+   ();
+}
+
+
+sub tab_add_lines {
+   my ($self, $tab) = @_;
+   my $mark = $self->tab_activity_mark($tab);
+   $tab->{lastActivity} = int urxvt::NOW;
+   $self->refresh if $mark ne $self->tab_activity_mark($tab);
+   ();
+}
+
+
+sub tab_user_command {
+  my ($self, $tab, $cmd, $proxy_events) = @_;
+
+  if ($cmd eq 'tabbedex:new_tab') {
+    $self->new_tab;
+  }
+  elsif ($cmd eq 'tabbedex:next_tab') {
+    $self->change_tab($tab, 1);
+  }
+  elsif ($cmd eq 'tabbedex:prev_tab') {
+    $self->change_tab($tab, -1);
+  }
+  elsif ($cmd eq 'tabbedex:move_tab_left') {
+    $self->move_tab($tab, -1);
+  }
+  elsif ($cmd eq 'tabbedex:move_tab_right') {
+    $self->move_tab($tab, 1);
+  }
+  elsif ($cmd eq 'tabbedex:rename_tab') {
+    $self->rename_tab($tab);
+  }
+  else {
+    # Proxy the user command through to the tab's term, while taking care not
+    # to get caught in an infinite loop.
+    if ($proxy_events && $self->{running_user_command} == 0) {
+      $self->{running_user_command} = 1;
+      urxvt::invoke($tab->{term}, 20, $cmd);
+      $self->{running_user_command} = 0;
+    }
+  }
+
+  ();
+}
+
+sub change_tab {
+  my ($self, $tab, $direction) = @_;
+
+  my $idx = 0;
+  ++$idx while $self->{tabs}[$idx] != $tab;
+  $idx += $direction;
+  $self->make_current ($self->{tabs}[$idx % @{ $self->{tabs}}]);
+
+  ();
+}
+
+sub move_tab {
+  my ($self, $tab, $direction) = @_;
+
+  if (@{ $self->{tabs} } > 1) {
+    my $idx1 = 0;
+    ++$idx1 while $self->{tabs}[$idx1] != $tab;
+    my $idx2 = ($idx1 + $direction) % @{ $self->{tabs} };
+
+    ($self->{tabs}[$idx1], $self->{tabs}[$idx2]) =
+      ($self->{tabs}[$idx2], $self->{tabs}[$idx1]);
+    $self->make_current ($self->{tabs}[$idx2]);
+  }
+
+  ();
+}
+
+sub rename_tab {
+  my ($self, $tab) = @_;
+
+  $tab->{is_inputting_name} = 1;
+  $tab->{old_name} = $tab->{name} ? $tab->{name} : "";
+  $tab->{new_name} = "";
+  $tab->{name} = "█";
+  $self->update_autohide (1);
+  $self->refresh;
+
+  ();
+}
+
+package urxvt::ext::tabbedex::tab;
+
+# helper extension implementing the subwindows of a tabbed terminal.
+# simply proxies all interesting calls back to the tabbedex class.
+
+{
+   for my $hook (qw(start destroy user_command key_press property_notify add_lines)) {
+      eval qq{
+         sub on_$hook {
+            my \$parent = \$_[0]{term}{parent}
+               or return;
+            \$parent->tab_$hook (\@_)
+         }
+      };
+      die if $@;
+   }
+}

.vim/autoload/pathogen.vim

@@ -0,0 +1,326 @@
+" pathogen.vim - path option manipulation
+" Maintainer:   Tim Pope <http://tpo.pe/>
+" Version:      2.2
+
+" Install in ~/.vim/autoload (or ~\vimfiles\autoload).
+"
+" For management of individually installed plugins in ~/.vim/bundle (or
+" ~\vimfiles\bundle), adding `call pathogen#infect()` to the top of your
+" .vimrc is the only other setup necessary.
+"
+" The API is documented inline below.  For maximum ease of reading,
+" :set foldmethod=marker
+
+if exists("g:loaded_pathogen") || &cp
+  finish
+endif
+let g:loaded_pathogen = 1
+
+function! s:warn(msg)
+  echohl WarningMsg
+  echomsg a:msg
+  echohl NONE
+endfunction
+
+" Point of entry for basic default usage.  Give a relative path to invoke
+" pathogen#incubate() (defaults to "bundle/{}"), or an absolute path to invoke
+" pathogen#surround().  For backwards compatibility purposes, a full path that
+" does not end in {} or * is given to pathogen#runtime_prepend_subdirectories()
+" instead.
+function! pathogen#infect(...) abort " {{{1
+  for path in a:0 ? reverse(copy(a:000)) : ['bundle/{}']
+    if path =~# '^[^\\/]\+$'
+      call s:warn('Change pathogen#infect('.string(path).') to pathogen#infect('.string(path.'/{}').')')
+      call pathogen#incubate(path . '/{}')
+    elseif path =~# '^[^\\/]\+[\\/]\%({}\|\*\)$'
+      call pathogen#incubate(path)
+    elseif path =~# '[\\/]\%({}\|\*\)$'
+      call pathogen#surround(path)
+    else
+      call s:warn('Change pathogen#infect('.string(path).') to pathogen#infect('.string(path.'/{}').')')
+      call pathogen#surround(path . '/{}')
+    endif
+  endfor
+  call pathogen#cycle_filetype()
+  return ''
+endfunction " }}}1
+
+" Split a path into a list.
+function! pathogen#split(path) abort " {{{1
+  if type(a:path) == type([]) | return a:path | endif
+  let split = split(a:path,'\\\@<!\%(\\\\\)*\zs,')
+  return map(split,'substitute(v:val,''\\\([\\,]\)'',''\1'',"g")')
+endfunction " }}}1
+
+" Convert a list to a path.
+function! pathogen#join(...) abort " {{{1
+  if type(a:1) == type(1) && a:1
+    let i = 1
+    let space = ' '
+  else
+    let i = 0
+    let space = ''
+  endif
+  let path = ""
+  while i < a:0
+    if type(a:000[i]) == type([])
+      let list = a:000[i]
+      let j = 0
+      while j < len(list)
+        let escaped = substitute(list[j],'[,'.space.']\|\\[\,'.space.']\@=','\\&','g')
+        let path .= ',' . escaped
+        let j += 1
+      endwhile
+    else
+      let path .= "," . a:000[i]
+    endif
+    let i += 1
+  endwhile
+  return substitute(path,'^,','','')
+endfunction " }}}1
+
+" Convert a list to a path with escaped spaces for 'path', 'tag', etc.
+function! pathogen#legacyjoin(...) abort " {{{1
+  return call('pathogen#join',[1] + a:000)
+endfunction " }}}1
+
+" Remove duplicates from a list.
+function! pathogen#uniq(list) abort " {{{1
+  let i = 0
+  let seen = {}
+  while i < len(a:list)
+    if (a:list[i] ==# '' && exists('empty')) || has_key(seen,a:list[i])
+      call remove(a:list,i)
+    elseif a:list[i] ==# ''
+      let i += 1
+      let empty = 1
+    else
+      let seen[a:list[i]] = 1
+      let i += 1
+    endif
+  endwhile
+  return a:list
+endfunction " }}}1
+
+" \ on Windows unless shellslash is set, / everywhere else.
+function! pathogen#separator() abort " {{{1
+  return !exists("+shellslash") || &shellslash ? '/' : '\'
+endfunction " }}}1
+
+" Convenience wrapper around glob() which returns a list.
+function! pathogen#glob(pattern) abort " {{{1
+  let files = split(glob(a:pattern),"\n")
+  return map(files,'substitute(v:val,"[".pathogen#separator()."/]$","","")')
+endfunction "}}}1
+
+" Like pathogen#glob(), only limit the results to directories.
+function! pathogen#glob_directories(pattern) abort " {{{1
+  return filter(pathogen#glob(a:pattern),'isdirectory(v:val)')
+endfunction "}}}1
+
+" Turn filetype detection off and back on again if it was already enabled.
+function! pathogen#cycle_filetype() " {{{1
+  if exists('g:did_load_filetypes')
+    filetype off
+    filetype on
+  endif
+endfunction " }}}1
+
+" Check if a bundle is disabled.  A bundle is considered disabled if it ends
+" in a tilde or its basename or full name is included in the list
+" g:pathogen_disabled.
+function! pathogen#is_disabled(path) " {{{1
+  if a:path =~# '\~$'
+    return 1
+  elseif !exists("g:pathogen_disabled")
+    return 0
+  endif
+  let sep = pathogen#separator()
+  let blacklist = g:pathogen_disabled
+  return index(blacklist, strpart(a:path, strridx(a:path, sep)+1)) != -1 && index(blacklist, a:path) != 1
+endfunction "}}}1
+
+" Prepend the given directory to the runtime path and append its corresponding
+" after directory.  If the directory is already included, move it to the
+" outermost position.  Wildcards are added as is.  Ending a path in /{} causes
+" all subdirectories to be added (except those in g:pathogen_disabled).
+function! pathogen#surround(path) abort " {{{1
+  let sep = pathogen#separator()
+  let rtp = pathogen#split(&rtp)
+  if a:path =~# '[\\/]{}$'
+    let path = fnamemodify(a:path[0:-4], ':p:s?[\\/]\=$??')
+    let before = filter(pathogen#glob_directories(path.sep.'*'), '!pathogen#is_disabled(v:val)')
+    let after  = filter(reverse(pathogen#glob_directories(path.sep."*".sep."after")), '!pathogen#is_disabled(v:val[0:-7])')
+    call filter(rtp,'v:val[0:strlen(path)-1] !=# path')
+  else
+    let path = fnamemodify(a:path, ':p:s?[\\/]\=$??')
+    let before = [path]
+    let after = [path . sep . 'after']
+    call filter(rtp, 'index(before + after, v:val) == -1')
+  endif
+  let &rtp = pathogen#join(before, rtp, after)
+  return &rtp
+endfunction " }}}1
+
+" Prepend all subdirectories of path to the rtp, and append all 'after'
+" directories in those subdirectories.  Deprecated.
+function! pathogen#runtime_prepend_subdirectories(path) " {{{1
+  call s:warn('Change pathogen#runtime_prepend_subdirectories('.string(a:path).') to pathogen#surround('.string(a:path.'/{}').')')
+  return pathogen#surround(a:path . pathogen#separator() . '{}')
+endfunction " }}}1
+
+" For each directory in the runtime path, add a second entry with the given
+" argument appended.  If the argument ends in '/{}', add a separate entry for
+" each subdirectory.  The default argument is 'bundle/{}', which means that
+" .vim/bundle/*, $VIM/vimfiles/bundle/*, $VIMRUNTIME/bundle/*,
+" $VIM/vim/files/bundle/*/after, and .vim/bundle/*/after will be added (on
+" UNIX).
+function! pathogen#incubate(...) abort " {{{1
+  let sep = pathogen#separator()
+  let name = a:0 ? a:1 : 'bundle/{}'
+  if "\n".s:done_bundles =~# "\\M\n".name."\n"
+    return ""
+  endif
+  let s:done_bundles .= name . "\n"
+  let list = []
+  for dir in pathogen#split(&rtp)
+    if dir =~# '\<after$'
+      if name =~# '{}$'
+        let list +=  filter(pathogen#glob_directories(substitute(dir,'after$',name[0:-3],'').'*'.sep.'after'), '!pathogen#is_disabled(v:val[0:-7])') + [dir]
+      else
+        let list += [dir, substitute(dir, 'after$', '', '') . name . sep . 'after']
+      endif
+    else
+      if name =~# '{}$'
+        let list +=  [dir] + filter(pathogen#glob_directories(dir.sep.name[0:-3].'*'), '!pathogen#is_disabled(v:val)')
+      else
+        let list += [dir . sep . name, dir]
+      endif
+    endif
+  endfor
+  let &rtp = pathogen#join(pathogen#uniq(list))
+  return 1
+endfunction " }}}1
+
+" Deprecated alias for pathogen#incubate().
+function! pathogen#runtime_append_all_bundles(...) abort " {{{1
+  if a:0
+    call s:warn('Change pathogen#runtime_append_all_bundles('.string(a:1).') to pathogen#incubate('.string(a:1.'/{}').')')
+  else
+    call s:warn('Change pathogen#runtime_append_all_bundles() to pathogen#incubate()')
+  endif
+  return call('pathogen#incubate', map(copy(a:000),'v:val . "/{}"'))
+endfunction
+
+let s:done_bundles = ''
+" }}}1
+
+" Invoke :helptags on all non-$VIM doc directories in runtimepath.
+function! pathogen#helptags() abort " {{{1
+  let sep = pathogen#separator()
+  for glob in pathogen#split(&rtp)
+    for dir in split(glob(glob), "\n")
+      if (dir.sep)[0 : strlen($VIMRUNTIME)] !=# $VIMRUNTIME.sep && filewritable(dir.sep.'doc') == 2 && !empty(filter(split(glob(dir.sep.'doc'.sep.'*'),"\n>"),'!isdirectory(v:val)')) && (!filereadable(dir.sep.'doc'.sep.'tags') || filewritable(dir.sep.'doc'.sep.'tags'))
+        silent! execute 'helptags' pathogen#fnameescape(dir.'/doc')
+      endif
+    endfor
+  endfor
+endfunction " }}}1
+
+command! -bar Helptags :call pathogen#helptags()
+
+" Execute the given command.  This is basically a backdoor for --remote-expr.
+function! pathogen#execute(...) abort " {{{1
+  for command in a:000
+    execute command
+  endfor
+  return ''
+endfunction " }}}1
+
+" Like findfile(), but hardcoded to use the runtimepath.
+function! pathogen#runtime_findfile(file,count) abort "{{{1
+  let rtp = pathogen#join(1,pathogen#split(&rtp))
+  let file = findfile(a:file,rtp,a:count)
+  if file ==# ''
+    return ''
+  else
+    return fnamemodify(file,':p')
+  endif
+endfunction " }}}1
+
+" Backport of fnameescape().
+function! pathogen#fnameescape(string) abort " {{{1
+  if exists('*fnameescape')
+    return fnameescape(a:string)
+  elseif a:string ==# '-'
+    return '\-'
+  else
+    return substitute(escape(a:string," \t\n*?[{`$\\%#'\"|!<"),'^[+>]','\\&','')
+  endif
+endfunction " }}}1
+
+if exists(':Vedit')
+  finish
+endif
+
+let s:vopen_warning = 0
+
+function! s:find(count,cmd,file,lcd) " {{{1
+  let rtp = pathogen#join(1,pathogen#split(&runtimepath))
+  let file = pathogen#runtime_findfile(a:file,a:count)
+  if file ==# ''
+    return "echoerr 'E345: Can''t find file \"".a:file."\" in runtimepath'"
+  endif
+  if !s:vopen_warning
+    let s:vopen_warning = 1
+    let warning = '|echohl WarningMsg|echo "Install scriptease.vim to continue using :V'.a:cmd.'"|echohl NONE'
+  else
+    let warning = ''
+  endif
+  if a:lcd
+    let path = file[0:-strlen(a:file)-2]
+    execute 'lcd `=path`'
+    return a:cmd.' '.pathogen#fnameescape(a:file) . warning
+  else
+    return a:cmd.' '.pathogen#fnameescape(file) . warning
+  endif
+endfunction " }}}1
+
+function! s:Findcomplete(A,L,P) " {{{1
+  let sep = pathogen#separator()
+  let cheats = {
+        \'a': 'autoload',
+        \'d': 'doc',
+        \'f': 'ftplugin',
+        \'i': 'indent',
+        \'p': 'plugin',
+        \'s': 'syntax'}
+  if a:A =~# '^\w[\\/]' && has_key(cheats,a:A[0])
+    let request = cheats[a:A[0]].a:A[1:-1]
+  else
+    let request = a:A
+  endif
+  let pattern = substitute(request,'/\|\'.sep,'*'.sep,'g').'*'
+  let found = {}
+  for path in pathogen#split(&runtimepath)
+    let path = expand(path, ':p')
+    let matches = split(glob(path.sep.pattern),"\n")
+    call map(matches,'isdirectory(v:val) ? v:val.sep : v:val')
+    call map(matches,'expand(v:val, ":p")[strlen(path)+1:-1]')
+    for match in matches
+      let found[match] = 1
+    endfor
+  endfor
+  return sort(keys(found))
+endfunction " }}}1
+
+command! -bar -bang -range=1 -nargs=1 -complete=customlist,s:Findcomplete Ve       :execute s:find(<count>,'edit<bang>',<q-args>,0)
+command! -bar -bang -range=1 -nargs=1 -complete=customlist,s:Findcomplete Vedit    :execute s:find(<count>,'edit<bang>',<q-args>,0)
+command! -bar -bang -range=1 -nargs=1 -complete=customlist,s:Findcomplete Vopen    :execute s:find(<count>,'edit<bang>',<q-args>,1)
+command! -bar -bang -range=1 -nargs=1 -complete=customlist,s:Findcomplete Vsplit   :execute s:find(<count>,'split',<q-args>,<bang>1)
+command! -bar -bang -range=1 -nargs=1 -complete=customlist,s:Findcomplete Vvsplit  :execute s:find(<count>,'vsplit',<q-args>,<bang>1)
+command! -bar -bang -range=1 -nargs=1 -complete=customlist,s:Findcomplete Vtabedit :execute s:find(<count>,'tabedit',<q-args>,<bang>1)
+command! -bar -bang -range=1 -nargs=1 -complete=customlist,s:Findcomplete Vpedit   :execute s:find(<count>,'pedit',<q-args>,<bang>1)
+command! -bar -bang -range=1 -nargs=1 -complete=customlist,s:Findcomplete Vread    :execute s:find(<count>,'read',<q-args>,<bang>1)
+
+" vim:set et sw=2:

.vim/plugin/AutoFenc.vim

@@ -0,0 +1,698 @@
+" File:        AutoFenc.vim
+" Brief:       Tries to automatically detect file encoding
+" Author:      Petr Zemek, s3rvac AT gmail DOT com
+" Version:     1.5
+" Last Change: Sat Mar 17 11:39:56 CET 2012
+"
+" License:
+"   Copyright (C) 2009-2012 Petr Zemek
+"   This program is free software; you can redistribute it and/or modify it
+"   under the terms of the GNU General Public License as published by the Free
+"   Software Foundation; either version 2 of the License, or (at your option)
+"   any later version.
+"
+"   This program is distributed in the hope that it will be useful, but
+"   WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+"   or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+"   for more details.
+"
+"   You should have received a copy of the GNU General Public License along
+"   with this program; if not, write to the Free Software Foundation, Inc.,
+"   59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
+"
+" Description:
+"   This script tries to automatically detect and set file encoding when
+"   opening a file in Vim. It does this in several possible ways (according
+"   to the configuration) in this order (when a method fails, it tries
+"   the following one):
+"     (1) detection of BOM (byte-order-mark) at the beginning of the file,
+"         only for some multibyte encodings
+"     (2) HTML way of encoding detection (via <meta> tag), only for HTML based
+"         file types
+"     (3) XML way of encoding detection (via <?xml ... ?> declaration), only
+"         for XML based file types
+"     (4) CSS way of encoding detection (via @charset 'at-rule'), only for
+"         CSS files
+"     (5) checks whether the encoding is specified in a comment (like
+"         '# Encoding: latin2'), for all file types
+"     (6) tries to detect the encoding via specified external program
+"         (the default one is enca), for all file types
+"
+"   If the autodetection fails, it's up to Vim (and your configuration)
+"   to set the encoding.
+"
+"   Configuration options for this plugin (you can set them in your $HOME/.vimrc):
+"    - g:autofenc_enable (0 or 1, default 1)
+"        Enables/disables this plugin.
+"    - g:autofenc_emit_messages (0 or 1, default 0)
+"        Emits messages about the detected/used encoding upon opening a file.
+"    - g:autofenc_max_file_size (number >= 0, default 10485760)
+"        If the size of a file is higher than this value (in bytes), then
+"        the autodetection will not be performed.
+"    - g:autofenc_disable_for_files_matching (regular expression, see below)
+"        If the file (with complete path) matches this regular expression,
+"        then the autodetection will not be performed. It is by default set
+"        to disable autodetection for non-local files (e.g. accessed via ftp,
+"        scp etc., because the script can't handle some kind of autodetection
+"        for these files). The regular expression is matched case-sensitively.
+"    - g:autofenc_disable_for_file_types (list of strings, default [])
+"        If the file type matches some of the filetypes specified in this list,
+"        then the autodetection will not be performed. Comparison is done
+"        case-sensitively.
+"    - g:autofenc_autodetect_bom (0 or 1, default 0 if 'ucs-bom' is in
+"                                 'fileencodings', 1 otherwise)
+"        Enables/disables detection of encoding by BOM.
+"    - g:autofenc_autodetect_html (0 or 1, default 1)
+"        Enables/disables detection of encoding for HTML based documents.
+"    - g:autofenc_autodetect_html_filetypes (regular expression, see below)
+"        Regular expression for all supported HTML file types.
+"    - g:autofenc_autodetect_xml (0 or 1, default 1)
+"        Enables/disables detection of encoding for XML based documents.
+"    - g:autofenc_autodetect_xml_filetypes (regular expression, see below)
+"        Regular expression for all supported XML file types.
+"    - g:autofenc_autodetect_css (0 or 1, default 1)
+"        Enables/disables detection of encoding for CSS documents.
+"    - g:autofenc_autodetect_css_filetypes (regular expression, see below)
+"        Regular expression for all supported CSS file types.
+"    - g:autofenc_autodetect_comment (0 or 1, default 1)
+"        Enables/disables detection of encoding in comments.
+"    - g:autofenc_autodetect_commentexpr (regular expression, see below)
+"        Pattern for detection of encodings specified in a comment.
+"    - g:autofenc_autodetect_num_of_lines (number >= 0, default 5)
+"        How many lines from the beginning and from the end of the file should
+"        be searched for the possible encoding declaration.
+"    - g:autofenc_autodetect_ext_prog (0 or 1, default 1)
+"        Enables/disables detection of encoding via external program
+"        (see additional settings below).
+"    - g:autofenc_ext_prog_path (string, default 'enca')
+"        Path to the external program. It can be either relative or absolute.
+"        The external program can take any number of arguments, but
+"        the last one must be a path to the file for which the encoding
+"        is to be detected (it will be supplied by this plugin).
+"        Output of the program must be the name of encoding in which the file
+"        is saved (string on a single line).
+"    - g:autofenc_ext_prog_args (string, default '-i -L czech')
+"        Additional program arguments (can be none, i.e. '').
+"    - g:autofenc_ext_prog_unknown_fenc (string, default '???')
+"        If the output of the external program is this string, then it means
+"        that the file encoding was not detected successfully. The string must
+"        be case-sensitive.
+"    - g:autofenc_enc_blacklist (regular expression, default '')
+"        If the detected encoding matches this regular expression, it is
+"        ignored.
+"
+" Requirements:
+"   - filetype plugin must be enabled (a line like 'filetype plugin on' must
+"     be in your $HOME/.vimrc [*nix] or %UserProfile%\_vimrc [MS Windows])
+"
+" Installation Details:
+"   Put this file into your $HOME/.vim/plugin directory [*nix]
+"   or %UserProfile%\vimfiles\plugin folder [MS Windows].
+"
+" Notes:
+"  This script is by all means NOT perfect, but it works for me and suits my
+"  needs very well, so it might be also useful for you. Your feedback,
+"  opinion, suggestions, bug reports, patches, simply anything you have
+"  to say is welcomed!
+"
+"  There are similar plugins to this one, so if you don't like this one,
+"  you can test these:
+"    - FencView.vim (http://www.vim.org/scripts/script.php?script_id=1708)
+"        Mainly supports detection of encodings for asian languages.
+"    - MultiEnc.vim (http://www.vim.org/scripts/script.php?script_id=1806)
+"        Obsolete, merged with the previous one.
+"    - charset.vim (http://www.vim.org/scripts/script.php?script_id=199)
+"        Not very complete/correct and last update in 2002.
+"    - http://vim.wikia.com/wiki/Detect_encoding_from_the_charset_specified_in_HTML_files
+"        Same basic ideas but only for HTML files.
+"  Let me know if there are others and I'll add them here.
+"
+" Changelog:
+"   1.5 (2012-03-17) Thanks to Ingo Karkat for the updates in this version.
+"     - Supported HTML/XML/CSS file types have been made configurable and added more defaults.
+"     - Do not emit the "unrecognized charset" message when the encoding is known.
+"
+"   1.4 (2012-03-11) Thanks to Ingo Karkat for the updates in this version.
+"     - Improved the detection regexp for comments:
+"         - added "fileencoding" and "charset";
+"         - demands that there is a whitespace in front of the keyword, so that
+"           "daycoding" doesn't match;
+"         - g:autofenc_autodetect_commentexpr allows to configure the pattern
+"           for comment detection.
+"     - Introduced g:autofenc_enc_blacklist to disable some encodings. For
+"       example, the enca tool has a tendency to detect plain text files as
+"       UTF-7. With the blacklist, AutoFenc can be instructed to ignore those
+"       encodings.
+"     - The check for ASCII is set to be case-insensitive because enca reports
+"       this in uppercase, so the condition fails unless ignorecase is set.
+"     - Keeps changed CWD with 'autochdir' setting by temporarily disabling it.
+"       For example, suppose that a user has ":lcd .." in
+"       after/ftplugin/gitcommit.vim and that he is in the Git root directory,
+"       not the .git subdir when composing a commit message. The reload of the
+"       buffer by AutoFenc (via :edit) again triggered the automatic change of
+"       the working dir, and therefore the customization was lost. The
+"       'autochdir' setting needs to be temporarily disabled to avoid that.
+"     - Added a support for plain Vim 7.0 in the shellescape() emulation from
+"       version 1.3.4. Otherwise, there were errors in Vim 7.0.
+"
+"   1.3.4 (2012-02-27)
+"     - Don't override when the user explicitly sets file encoding with ++enc
+"       (thanks to Benjamin Fritz).
+"     - Fixed TOhtml version detection (again) and made sure line continuations
+"       can actually be used (thanks to Benjamin Fritz and Ingo Karkat).
+"     - Disabled the option shellslash on Windows before calling shellescape()
+"       (it may cause problems on Windows, thanks for the tip goes to Benjamin
+"       Fritz).
+"
+"   1.3.3 (2011-11-29) Thanks to Ingo Karkat for the updates in this version.
+"     - Fixed a problem in the TOhtml detection when, for example,
+"       g:loaded_2html_plugin = 'vim7.3_v6'.
+"     - The return code of the call of an external program via
+"       system(ext_prog_cmd) is now checked. This prevents Vim interpreting an
+"       error message as an encoding.
+"     - shellescape() is now used instead of quoting file_path manually.
+"
+"   1.3.2 (2011-11-24) Thanks to Benjamin Fritz for the updates in this version.
+"     - Fixed the detection of the version of the TOhtml plugin.
+"
+"   1.3.1 (2011-07-23) Thanks to Benjamin Fritz for the updates in this version.
+"     - Fixed the plugin behavior when reloading a file with different settings.
+"
+"   1.3 (2011-04-22) Thanks to Benjamin Fritz for the updates in this version.
+"     - Added support for HTML version 5 encoding detection.
+"     - The script now dies gracefully in old Vims.
+"     - 'g:autofenc_autodetect_comment_num_of_lines' renamed to 'g:autofenc_autodetect_num_of_lines'
+"
+"   1.2.1 (2011-04-13)
+"     - Fixed a typo in a variable name (this resulted in an error in some
+"       occasions). Thanks to Charles Lee for pointing this bug out.
+"
+"   1.2 (2011-03-31) Thanks to Benjamin Fritz for the updates in this version.
+"     - TOhtml's IANA name/Vim encoding conversion functions are now used.
+"     - Changed BOM detection so it does not duplicate a check Vim already did by
+"       default (i.e. default to off if ucs-bom is in the 'fileencodings').
+"     - Put autocmds in the AutoFenc augroup for easier handling.
+"     - Made autocmd nested so we don't need to worry about restoring everything
+"       that other autocmds may set (e.g. syntax).
+"     - Jumplist or cursor position during detection are not affected.
+"     - The g:autofenc_autodetect_num_of_lines option is now used also in
+"       HTML/XML/CSS detection routines (previously only used for encoding
+"       specified in comments).
+"     - Improved HTML charset line regex.
+"     - Added an option (g:autofenc_emit_message) to emit messages about the
+"       detected/used encoding upon opening a file.
+"
+"   1.1.1 (2009-10-03)
+"     - Fixed the comment encoding detection function (the encoding was not
+"       detected if there were some alphanumeric characters before
+"       the "encoding" string, like in "# vim:fileencoding=<encoding-name>").
+"
+"   1.1 (2009-08-16)
+"     - Added three configuration possibilites to disable autodetection for
+"       specific files (based on file size, file type and file path).
+"       See script description for more info.
+"
+"   1.0.2 (2009-08-11)
+"     - Fixed the XML encoding detection function.
+"     - Minor code and documentation fixes.
+"
+"   1.0.1 (2009-08-02)
+"     - Encoding autodetection is now performed only if the opened file
+"       exists (is stored somewhere). So, for example, the autodetection
+"       is now not performed when a new file is opened.
+"     - Correctly works with .viminfo, where the last cursor position
+"       in the file is stored when exiting the file. In the previous version
+"       of this script, this information was sometimes ignored and the cursor
+"       was initially on the very last line in a file. If the user does not
+"       use this .viminfo feature (or he does not use .viminfo at all),
+"       then the cursor will be initially placed on the very first line.
+"     - (Hopefully) fixed the implementation of the function which sets
+"       the detected encoding.
+"
+"   1.0 (2009-07-26)
+"     - Initial release version of this script.
+"
+
+" Check if the plugin was already loaded. Also, die gracefully if the used Vim
+" version is too old.
+if exists('autofenc_loaded') || v:version < 700
+	finish
+endif
+" Make the loaded variable actually useful by including the version number
+let autofenc_loaded = '1.5'
+
+" This plugin uses line continuations
+if &cpo =~ 'C'
+	let s:oldcpo = &cpo
+	set cpo-=C
+endif
+
+"-------------------------------------------------------------------------------
+" Checks whether the selected variable (first parameter) is already set and
+" if not, it sets it to the value of the second parameter.
+"-------------------------------------------------------------------------------
+function s:CheckAndSetVar(var, value)
+	if !exists(a:var)
+		exec 'let ' . a:var . ' = ' . string(a:value)
+	endif
+endfunction
+
+" Variables initialization (see script description for more information)
+call s:CheckAndSetVar('g:autofenc_enable', 1)
+call s:CheckAndSetVar('g:autofenc_emit_messages', 0)
+call s:CheckAndSetVar('g:autofenc_max_file_size', 10485760)
+call s:CheckAndSetVar('g:autofenc_disable_for_files_matching', '^[-_a-zA-Z0-9]\+://')
+call s:CheckAndSetVar('g:autofenc_disable_for_file_types', [])
+call s:CheckAndSetVar('g:autofenc_autodetect_bom', (&fileencodings !~# 'ucs-bom'))
+call s:CheckAndSetVar('g:autofenc_autodetect_html', 1)
+call s:CheckAndSetVar('g:autofenc_autodetect_html_filetypes', '^\(html.*\|xhtml\|aspperl\|aspvbs\|cf\|dtml\|gsp\|jsp\|mason\|php\|plp\|smarty\|spyce\|webmacro\)$')
+call s:CheckAndSetVar('g:autofenc_autodetect_xml', 1)
+call s:CheckAndSetVar('g:autofenc_autodetect_xml_filetypes', '^\(xml\|xquery\|xsd\|xslt\?\|ant\|dsl\|mxml\|svg\|wsh\|xbl\)$')
+call s:CheckAndSetVar('g:autofenc_autodetect_css', 1)
+call s:CheckAndSetVar('g:autofenc_autodetect_css_filetypes', '^\(css\|sass\)$')
+call s:CheckAndSetVar('g:autofenc_autodetect_comment', 1)
+call s:CheckAndSetVar('g:autofenc_autodetect_commentexpr', '\c^\A\(.*\s\)\?\(\(\(file\)\?en\)\?coding\|charset\)[:=]\?\s*\zs[-A-Za-z0-9_]\+')
+call s:CheckAndSetVar('g:autofenc_autodetect_num_of_lines', 5)
+call s:CheckAndSetVar('g:autofenc_autodetect_ext_prog', 1)
+call s:CheckAndSetVar('g:autofenc_ext_prog_path', 'enca')
+call s:CheckAndSetVar('g:autofenc_ext_prog_args', '-i -L czech')
+call s:CheckAndSetVar('g:autofenc_ext_prog_unknown_fenc', '???')
+call s:CheckAndSetVar('g:autofenc_enc_blacklist', '')
+
+"-------------------------------------------------------------------------------
+" Normalizes selected encoding and returns it, so it can be safely used as
+" a new encoding. This function should be called before a new encoding is set.
+"-------------------------------------------------------------------------------
+function s:NormalizeEncoding(enc)
+	let nenc = tolower(a:enc)
+
+	" Recent versions of TOhtml runtime plugin have some nice charset to encoding
+	" functions which even allow user overrides. Use them if available.
+	let nenc2 = ""
+	silent! let nenc2 = tohtml#EncodingFromCharset(nenc)
+	if nenc2 != ""
+		return nenc2
+	" If the TOhtml function is unavailable, at least handle some canonical
+	" encoding names in Vim.
+	elseif nenc =~ 'iso[-_]8859-1'
+		return 'latin1'
+	elseif nenc =~ 'iso[-_]8859-2'
+		return 'latin2'
+	elseif nenc ==? 'gb2312'
+		return 'cp936' " GB2312 imprecisely means CP936 in HTML
+	elseif nenc =~ '\(cp\|win\(dows\)\?\)-125\d'
+		return 'cp125'.nenc[strlen(nenc)-1]
+	elseif nenc == 'utf8'
+		return 'utf-8'
+	elseif g:autofenc_emit_messages && nenc !~ '^\%(8bit-\|2byte-\)\?\%(latin[12]\|utf-8\|utf-16\%(le\)\?\|ucs-[24]\%(le\)\?\|iso-8859-\d\{1,2}\|cp\d\{3,4}\)$'
+		echomsg 'AutoFenc: detected unrecognized charset, trying fenc='.nenc
+	endif
+
+	return nenc
+endfunction
+
+"-------------------------------------------------------------------------------
+" Sets the selected file encoding. Returns 1 if the file was reloaded,
+" 0 otherwise.
+"-------------------------------------------------------------------------------
+function s:SetFileEncoding(enc)
+	let nenc = s:NormalizeEncoding(a:enc)
+
+	" Check whether we're not trying to set the current file encoding
+	if nenc != "" && nenc !=? &fenc
+		if exists('&autochdir') && &autochdir
+			" Other autocmds may have changed the window's working directory;
+			" when 'autochdir' is set, the :edit will reset that, so temporarily
+			" disable the setting.
+			let old_autochdir = &autochdir
+			set noautochdir
+		endif
+		try
+			" Set the file encoding and reload it, keeping any user-specified
+			" fileformat, and keeping any bad bytes in case the header is wrong
+			" (this won't let the user save if a conversion error happened on
+			" read)
+			exec 'edit ++enc='.nenc.' ++ff='.&ff.' ++bad=keep'
+		finally
+			if exists('old_autochdir')
+				let &autochdir = old_autochdir
+			endif
+		endtry
+
+		" File was reloaded
+		return 1
+	else
+		" File was not reloaded
+		return 0
+	endif
+endfunction
+
+"-------------------------------------------------------------------------------
+" Tries to detect a BOM (byte order mark) at the beginning of the file to
+" detect a multibyte encoding. If there is a BOM, it returns the appropriate
+" encoding, otherwise the empty string is returned.
+"-------------------------------------------------------------------------------
+function s:BOMEncodingDetection()
+	" Implementation of this function is based on a part of the FencsView.vim
+	" plugin by Ming Bai (http://www.vim.org/scripts/script.php?script_id=1708)
+
+	" Get the first line of the file
+	let file_content = readfile(expand('%:p'), 'b', 1)
+	if file_content == []
+		" Empty file
+		return ''
+	endif
+	let first_line = file_content[0]
+
+	" Check whether it contains BOM and if so, return appropriate encoding
+	" Note: If the index is out of bounds, ahx is set to '' automatically
+	let ah1 = first_line[0]
+	let ah2 = first_line[1]
+	let ah3 = first_line[2]
+	let ah4 = first_line[3]
+	" TODO: I don't know why but if there is a NUL byte, the char2nr()
+	" function transforms it to a newline (0x0A) instead of 0x00...
+	let a1  = char2nr(ah1) == 0x0A ? 0x00 : char2nr(ah1)
+	let a2  = char2nr(ah2) == 0x0A ? 0x00 : char2nr(ah2)
+	let a3  = char2nr(ah3) == 0x0A ? 0x00 : char2nr(ah3)
+	let a4  = char2nr(ah4) == 0x0A ? 0x00 : char2nr(ah4)
+	if a1.a2.a3.a4 == 0x00.0x00.0xfe.0xff
+		return 'utf-32'
+	elseif a1.a2.a3.a4 == 0xff.0xfe.0x00.0x00
+		return 'utf-32le'
+	elseif a1.a2.a3 == 0xef.0xbb.0xbf
+		return 'utf-8'
+	elseif a1.a2 == 0xfe.0xff
+		return 'utf-16'
+	elseif a1.a2 == 0xff.0xfe
+		return 'utf-16le'
+	endif
+
+	" There was no legal BOM
+	return ''
+endfunction
+
+"-------------------------------------------------------------------------------
+" Tries the HTML way of encoding detection of the current file and returns the
+" detected encoding (or the empty string, if the encoding was not detected).
+"-------------------------------------------------------------------------------
+function s:HTMLEncodingDetection()
+	" This method is based on the meta tag in the head of the HTML document
+	" (<meta http-equiv="Content-Type" ...)
+
+	" Store the actual position in the file and move to the very first line
+	" in the file
+	let curpos=getpos('.')
+	keepjumps 1
+
+	let enc = ''
+
+	" The following regexp is a modified version of the regexp found here:
+	" http://vim.wikia.com/wiki/Detect_encoding_from_the_charset_specified_in_HTML_files
+	let charset_line = search('\c<meta\_s\+http-equiv=\([''"]\?\)Content-Type\1\_s\+content=\([''"]\)[A-Za-z]\+/[+A-Za-z]\+;\_s*charset=[-A-Za-z0-9_]\+\2', 'nc', g:autofenc_autodetect_num_of_lines)
+	" If charset line was not found, try attributes in reverse order since order is
+	" not actually important.
+	if charset_line == 0
+		let charset_line = search('\c<meta\_s\+content=\([''"]\)[A-Za-z]\+/[+A-Za-z]\+;\_s*charset=[-A-Za-z0-9_]\+\1\_s\+http-equiv=\([''"]\?\)Content-Type\2', 'nc', g:autofenc_autodetect_num_of_lines)
+	endif
+	" Detect in HTML version 5
+	if charset_line == 0
+		let charset_line = search('\c<meta\_s\+charset=\([''"]\)[-A-Za-z0-9_]\+\1', 'nc', g:autofenc_autodetect_num_of_lines)
+	endif
+	if charset_line != 0
+		let enc = matchstr(getline(charset_line), 'charset=\([''"]\)\?\zs[-A-Za-z0-9_]\+\ze\1')
+	endif
+
+	" Restore the original position in the file
+
+	call setpos('.', curpos)
+
+	return enc
+endfunction
+
+"-------------------------------------------------------------------------------
+" Tries the XML way of encoding detection of the current file and returns the
+" detected encoding (or the empty string, if the encoding was not detected).
+"-------------------------------------------------------------------------------
+function s:XMLEncodingDetection()
+	" The first part of this method is based on the first line of XML files
+	" (<?xml version="..." encoding="..."?>)
+
+	" Store the actual position in the file and move to the very first line
+	" in the file
+	let curpos=getpos('.')
+	keepjumps 1
+
+	let enc = ''
+
+	let charset_line = search('\c<?xml\s\+version="[.0-9]\+"\s\+encoding="[-A-Za-z0-9_]\+"', 'nc', g:autofenc_autodetect_num_of_lines)
+	if charset_line != 0
+		let enc = matchstr(getline(charset_line), 'encoding="\zs[-A-Za-z0-9_]\+')
+	endif
+
+	" Restore the original position in the file
+	call setpos('.', curpos)
+
+	" If there was no encoding specified, return utf-8 (the check for BOM
+	" should be done in another function - if the user wish that)
+	return enc != '' ? enc : 'utf-8'
+endfunction
+
+"-------------------------------------------------------------------------------
+" Tries the CSS way of encoding detection of the current file and returns the
+" detected encoding (or the empty string, if the encoding was not detected).
+"-------------------------------------------------------------------------------
+function s:CSSEncodingDetection()
+	" This method is based on the @charset 'at-rule'
+	" (see http://www.w3.org/International/questions/qa-css-charset)
+
+	" Store the actual position in the file and move to the very first line
+	" in the file
+	let curpos=getpos('.')
+	keepjumps 1
+
+	let enc = ''
+
+	" Note: The specs says that this line should be the first line in the file,
+	" but I'm searching every line in the file (some comments could perhaps
+	" precede the @charset in practice). If you don't like it, you are
+	" encouraged to change the code :).
+	let charset_line = search('\c^\s*@charset\s\+"[-A-Za-z0-9_]\+"', 'nc', g:autofenc_autodetect_num_of_lines)
+	if charset_line != 0
+		let enc = matchstr(getline(charset_line), '^\s*@charset\s\+"\zs[-A-Za-z0-9_]\+')
+	endif
+
+	" Restore the original position in the file
+	call setpos('.', curpos)
+
+	return enc
+endfunction
+
+"-------------------------------------------------------------------------------
+" Tries to detect encoding via encoding specified in a comment. The file is
+" searched for a line like '# encoding: utf-8' and the file encoding is
+" returned according to this line. If there is no such line, the empty string
+" is returned.
+"
+" The default format of the comment that specifies encoding is some
+" non-alphabetic characters at the beginning of the line, then 'charset'
+" or '[[file]en]coding' (without quotes, case insensitive), which is followed
+" by optional ':' (and whitespace) and the name of the encoding.
+"-------------------------------------------------------------------------------
+function s:CommentEncodingDetection()
+	" Get first and last X lines from the file (according to the configuration)
+	let num_of_lines = g:autofenc_autodetect_num_of_lines
+	let lines_to_search_enc = readfile(expand('%:p'), '', num_of_lines)
+	let lines_to_search_enc += readfile(expand('%:p'), '', -num_of_lines)
+
+	" Check all of the returned lines
+	for line in lines_to_search_enc
+		let enc = matchstr(line, g:autofenc_autodetect_commentexpr)
+		if enc != ''
+			return enc
+		endif
+	endfor
+
+	return ''
+endfunction
+
+"-------------------------------------------------------------------------------
+" A safe version of shellescape. Use it instead of shellescape().
+"-------------------------------------------------------------------------------
+function s:SafeShellescape(path)
+	try
+		if exists('*shellescape')
+			" On MS Windows, we need to disable the option shellslash before calling
+			" shellescape() because otherwise, it may do stupid things (see, e.g.,
+			" http://vim.1045645.n5.nabble.com/shellescape-doesn-t-work-in-Windows-with-shellslash-set-td1211618.html).
+			if has("win32") || has("win64")
+				let old_ssl = &shellslash
+				set noshellslash
+			endif
+			return shellescape(a:path)
+		else
+			" The shellescape({string}) function only exists since Vim 7.0.111
+			" Try to crudely support plain Vim 7.0, too.
+			return '"'.substitute(a:path, '"', '\\"', 'g').'"'
+		endif
+	finally
+		if exists('old_ssl')
+			let &shellslash = old_ssl
+		endif
+	endtry
+endfunction
+
+"-------------------------------------------------------------------------------
+" Tries to detect the file encoding via selected external program.
+" If the program is not executable or there is some error, it returns
+" the empty string. Otherwise, the detected encoding is returned.
+"-------------------------------------------------------------------------------
+function s:ExtProgEncodingDetection()
+	if executable(g:autofenc_ext_prog_path)
+		" Get full path of the currently edited file
+		let file_path = expand('%:p')
+
+		" Create the complete external program command by appending program
+		" arguments and the current file path to the external program.
+		"
+		let ext_prog_cmd = g:autofenc_ext_prog_path.' '.g:autofenc_ext_prog_args.' '.s:SafeShellescape(file_path)
+
+		" Run it to get the encoding
+		let enc = system(ext_prog_cmd)
+		if v:shell_error != 0
+			" An error occurred
+			return ''
+		endif
+
+		" Remove trailing newline from the output
+		" (system() removes any \r from the result automatically)
+		let enc = substitute(enc, '\n', '', '')
+
+		if enc != g:autofenc_ext_prog_unknown_fenc
+			" Encoding was (probably) detected successfully
+			return enc
+		endif
+	endif
+
+	return ''
+endfunction
+
+"-------------------------------------------------------------------------------
+" Tries to detect encoding of the current file via several ways (according
+" to the configuration) and returns it. If the encoding was not detected
+" successfully, it returns the empty string - this can happen because:
+"  - the file is in unknown encoding
+"  - the file is not stored anywhere (e.g. a new file was opened)
+"  - autodetection is disabled for this file (either the file is too large
+"    or autodetection is disabled for this file, see configuration)
+"-------------------------------------------------------------------------------
+function s:DetectFileEncoding()
+	" Check whether the autodetection should be performed
+	" (see function description for more information)
+	let file_path = expand('%:p')
+	let file_size = getfsize(file_path)
+	if file_path == '' ||
+			\ file_size > g:autofenc_max_file_size || file_size < 0 ||
+			\ file_path =~ g:autofenc_disable_for_files_matching ||
+			\ index(g:autofenc_disable_for_file_types, &ft, 0, 1) != -1
+		return ''
+	endif
+
+	" BOM encoding detection
+	if g:autofenc_autodetect_bom
+		let enc = s:BOMEncodingDetection()
+		if enc != ''
+			return enc
+		endif
+	endif
+
+	" HTML encoding detection
+	if g:autofenc_autodetect_html && &filetype =~? g:autofenc_autodetect_html_filetypes
+		let enc = s:HTMLEncodingDetection()
+		if enc != ''
+			return enc
+		endif
+	endif
+
+	" XML encoding detection
+	if g:autofenc_autodetect_xml && &filetype =~? g:autofenc_autodetect_xml_filetypes
+		let enc = s:XMLEncodingDetection()
+		if enc != ''
+			return enc
+		endif
+	endif
+
+	" CSS encoding detection
+	if g:autofenc_autodetect_css && &filetype =~? g:autofenc_autodetect_css_filetypes
+		let enc = s:CSSEncodingDetection()
+		if enc != ''
+			return enc
+		endif
+	endif
+
+	" Comment encoding detection
+	if g:autofenc_autodetect_comment
+		let enc = s:CommentEncodingDetection()
+		if enc != ''
+			return enc
+		endif
+	endif
+
+	" External program encoding detection
+	if g:autofenc_autodetect_ext_prog
+		let enc = s:ExtProgEncodingDetection()
+		if enc != ''
+			return enc
+		endif
+	endif
+
+	" Encoding was not detected
+	return ''
+endfunction
+
+"-------------------------------------------------------------------------------
+" Main plugin function. Tries to autodetect the correct file encoding
+" and sets the detected one (if any). If the ASCII encoding is detected,
+" it does nothing so allow Vim to set its internal encoding instead.
+"-------------------------------------------------------------------------------
+function s:DetectAndSetFileEncoding()
+	let enc = s:DetectFileEncoding()
+
+	" don't call again on the nested trigger from the edit
+	let b:autofenc_done = enc
+
+	if (enc != '') && (enc !=? 'ascii') &&
+			\ (g:autofenc_enc_blacklist == '' || enc !~? g:autofenc_enc_blacklist)
+		if s:SetFileEncoding(enc)
+			if g:autofenc_emit_messages
+				echomsg "AutoFenc: Detected [".enc."] from file, loaded with fenc=".&fenc
+			endif
+		endif
+	endif
+endfunction
+
+" Set the detected file encoding
+if g:autofenc_enable
+	augroup AutoFenc
+		au!
+		" We need to check that we're not in the middle of a reload due to this
+		" plugin otherwise can recurse forever. But unlet the variable to allow
+		" re-detection on the next read of this buffer if it is just unloaded.
+		au BufRead * nested
+			\ if !exists('b:autofenc_done') |
+			\   if v:cmdarg !~ '++enc' |
+			\     call s:DetectAndSetFileEncoding() |
+			\   endif |
+			\ else |
+			\   unlet b:autofenc_done |
+			\ endif
+	augroup END
+endif
+
+" Restore line continuations (and the rest of &cpo) when done
+if exists('s:oldcpo')
+	let &cpo = s:oldcpo
+	unlet s:oldcpo
+endif
+
+" vim: noet

.vimperatorrc

@@ -5,3 +5,9 @@ source! /home/kolan/.vimperatorrc.local
 " vim: set ft=vimperator:
 map <C-S-p> :tabm -1<CR>
 map <C-S-n> :tabm +1<CR>
+
+" Valadoc.org: disable 'new window' in 'edit mode'
+:imap <C-n> <Esc>gt<Esc>
+:imap <C-S-n> <Esc>gt<Esc>
+:imap <C-p> <Esc>gT<Esc>
+:imap <C-S-p> <Esc>gT<Esc>

.vimrc

@@ -6,7 +6,7 @@ set ts=4              " у меня табуляция (tabstop) 4 символ
 set tabstop=4
 set shiftwidth=4
 set textwidth=79
-set tw=79
+set tw=159
 set colorcolumn=80,120,160
 "set expandtab
 set autoindent
@@ -27,7 +27,7 @@ nmap <F6> :set invlist<cr>
 " set breakindent " https://www.linux.org.ru/forum/general/10615635?lastmod=1403800233259
 
 " https://ru.wikibooks.org/wiki/Vim#%D0%A1%D0%BF%D0%BE%D1%81%D0%BE%D0%B1_2
-set langmap=ёйцукенгшщзхъфывапролджэячсмитьбю;`qwertyuiop[]asdfghjkl\\;'zxcvbnm\\,.,ЙЦУКЕHГШЩЗХЪФЫВАПРОЛДЖЭЯЧСМИТЬБЮ;QWERTYUIOP{}ASDFGHJKL:\\"ZXCVBNM<>
+set langmap=ёйцукенгшщзхъфывапролджэячсмитьбю;`qwertyuiop[]asdfghjkl\\;'zxcvbnm\\,.,ЙЦУКЕНГШЩЗХЪФЫВАПРОЛДЖЭЯЧСМИТЬБЮ;QWERTYUIOP{}ASDFGHJKL:\\"ZXCVBNM<>
 
 " Setup for the GNU coding format standard
 function! GnuIndent()
@@ -191,7 +191,7 @@ map <F4> [I:let nr = input("Which one: ")<Bar>exe "normal " . nr ."[\t"<CR>
 
 " Foldging
 set foldenable
-set foldmethod=syntax
+" set foldmethod=syntax
 
 " VUNDLE "
 set nocompatible               " be iMproved
@@ -209,7 +209,7 @@ Bundle 'gmarik/vundle'
 " original repos on github
 Bundle 'tpope/vim-fugitive'
 Bundle 'Lokaltog/vim-easymotion'
-"Bundle 'rstacruz/sparkup', {'rtp': 'vim/'}
+" Bundle 'rstacruz/sparkup', {'rtp': 'vim/'}
 Bundle 'tpope/vim-rails.git'
 " vim-scripts repos
 Bundle 'L9'

.xinitrc

@@ -0,0 +1,27 @@
+DEFAULT_SESSION=awesome
+
+case $1 in
+urxvt)
+	exec urxvt
+	;;
+awesome)
+	exec awesome
+	;;
+fvwm-crystal)
+	exec fvwm-crystal
+	;;
+fvwm)	exec fvwm
+	;;
+kde)
+	exec startkde
+	;;
+xfce4)
+	exec startxfce4
+	;;
+fluxbox)
+	exec startfluxbox
+	;;
+*)
+	exec $DEFAULT_SESSION
+	;;
+esac

.xprofile

@@ -0,0 +1 @@
+[[ -f ~/.bashrc ]] && . ~/.bashrc

.xscreensaver

@@ -0,0 +1,299 @@
+# XScreenSaver Preferences File
+# Written by xscreensaver-settings 6.07 for kolan on Fri Nov 17 11:56:11 2023.
+# https://www.jwz.org/xscreensaver/
+
+timeout:	0:08:00
+cycle:		0:00:00
+lock:		True
+lockTimeout:	0:30:00
+passwdTimeout:	0:00:30
+visualID:	default
+installColormap:    True
+verbose:	False
+splash:		True
+splashDuration:	0:00:05
+demoCommand:	xscreensaver-settings
+nice:		10
+fade:		True
+unfade:		False
+fadeSeconds:	0:00:03
+ignoreUninstalledPrograms:False
+dpmsEnabled:	True
+dpmsQuickOff:	True
+dpmsStandby:	0:08:00
+dpmsSuspend:	0:08:00
+dpmsOff:	0:08:00
+grabDesktopImages:  False
+grabVideoFrames:    False
+chooseRandomImages: False
+imageDirectory:	
+
+mode:		blank
+selected:	-1
+
+textMode:	date
+textLiteral:	XScreenSaver
+textFile:	/etc/gentoo-release
+textProgram:	fortune
+textURL:	https://planet.gentoo.org/rss20.xml
+dialogTheme:	default
+settingsGeom:	1920,15 -1,-1
+
+programs:								      \
+				maze --root				    \n\
+  GL: 				superquadrics --root			    \n\
+				attraction --root			    \n\
+				blitspin --root				    \n\
+				greynetic --root			    \n\
+				helix --root				    \n\
+				hopalong --root				    \n\
+				imsmap --root				    \n\
+-				noseguy --root				    \n\
+-				pyro --root				    \n\
+				qix --root				    \n\
+-				rocks --root				    \n\
+				rorschach --root			    \n\
+				decayscreen --root			    \n\
+				flame --root				    \n\
+				halo --root				    \n\
+				slidescreen --root			    \n\
+				pedal --root				    \n\
+				bouboule --root				    \n\
+-				braid --root				    \n\
+				coral --root				    \n\
+				deco --root				    \n\
+				drift --root				    \n\
+-				fadeplot --root				    \n\
+				galaxy --root				    \n\
+				goop --root				    \n\
+				grav --root				    \n\
+				ifs --root				    \n\
+  GL: 				jigsaw --root				    \n\
+				julia --root				    \n\
+-				kaleidescope --root			    \n\
+  GL: 				moebius --root				    \n\
+				moire --root				    \n\
+  GL: 				morph3d --root				    \n\
+				mountain --root				    \n\
+				munch --root				    \n\
+				penrose --root				    \n\
+  GL: 				pipes --root				    \n\
+				rdbomb --root				    \n\
+  GL: 				rubik --root				    \n\
+-				sierpinski --root			    \n\
+				slip --root				    \n\
+  GL: 				sproingies --root			    \n\
+				starfish --root				    \n\
+				strange --root				    \n\
+				swirl --root				    \n\
+				triangle --root				    \n\
+				xjack --root				    \n\
+				xlyap --root				    \n\
+  GL: 				atlantis --root				    \n\
+				bsod --root				    \n\
+  GL: 				bubble3d --root				    \n\
+  GL: 				cage --root				    \n\
+-				crystal --root				    \n\
+				cynosure --root				    \n\
+				discrete --root				    \n\
+				distort --root				    \n\
+				epicycle --root				    \n\
+				flow --root				    \n\
+  GL: 				glplanet --root				    \n\
+				interference --root			    \n\
+				kumppa --root				    \n\
+  GL: 				lament --root				    \n\
+				moire2 --root				    \n\
+  GL: 				sonar --root				    \n\
+  GL: 				stairs --root				    \n\
+				truchet --root				    \n\
+-				vidwhacker --root			    \n\
+-				webcollage --root			    \n\
+				blaster --root				    \n\
+				bumps --root				    \n\
+				ccurve --root				    \n\
+				compass --root				    \n\
+				deluxe --root				    \n\
+-				demon --root				    \n\
+- GL: 				extrusion --root			    \n\
+-				loop --root				    \n\
+				penetrate --root			    \n\
+				petri --root				    \n\
+				phosphor --root				    \n\
+  GL: 				pulsar --root				    \n\
+				ripples --root				    \n\
+				shadebobs --root			    \n\
+  GL: 				sierpinski3d --root			    \n\
+				spotlight --root			    \n\
+				squiral --root				    \n\
+				wander --root				    \n\
+				xflame --root				    \n\
+				xmatrix --root				    \n\
+  GL: 				gflux --root				    \n\
+-				nerverot --root				    \n\
+				xrayswarm --root			    \n\
+				xspirograph --root			    \n\
+  GL: 				circuit --root				    \n\
+  GL: 				dangerball --root			    \n\
+- GL: 				dnalogo --root				    \n\
+  GL: 				engine --root				    \n\
+  GL: 				flipscreen3d --root			    \n\
+  GL: 				gltext --root				    \n\
+  GL: 				menger --root				    \n\
+  GL: 				molecule --root				    \n\
+				rotzoomer --root			    \n\
+				scooter --root				    \n\
+				speedmine --root			    \n\
+  GL: 				starwars --root				    \n\
+  GL: 				stonerview --root			    \n\
+				vermiculate --root			    \n\
+				whirlwindwarp --root			    \n\
+				zoom --root				    \n\
+				anemone --root				    \n\
+				apollonian --root			    \n\
+  GL: 				boxed --root				    \n\
+  GL: 				cubenetic --root			    \n\
+  GL: 				endgame --root				    \n\
+				euler2d --root				    \n\
+				fluidballs --root			    \n\
+  GL: 				flurry --root				    \n\
+- GL: 				glblur --root				    \n\
+  GL: 				glsnake --root				    \n\
+				halftone --root				    \n\
+  GL: 				juggler3d --root			    \n\
+  GL: 				lavalite --root				    \n\
+-				polyominoes --root			    \n\
+  GL: 				queens --root				    \n\
+- GL: 				sballs --root				    \n\
+  GL: 				spheremonics --root			    \n\
+				twang --root				    \n\
+- GL: 				antspotlight --root			    \n\
+				apple2 --root				    \n\
+  GL: 				atunnel --root				    \n\
+				barcode --root				    \n\
+  GL: 				blinkbox --root				    \n\
+  GL: 				blocktube --root			    \n\
+  GL: 				bouncingcow --root			    \n\
+				cloudlife --root			    \n\
+  GL: 				cubestorm --root			    \n\
+				eruption --root				    \n\
+  GL: 				flipflop --root				    \n\
+  GL: 				flyingtoasters --root			    \n\
+				fontglide --root			    \n\
+  GL: 				gleidescope --root			    \n\
+  GL: 				glknots --root				    \n\
+  GL: 				glmatrix --root				    \n\
+- GL: 				glslideshow --root			    \n\
+  GL: 				hypertorus --root			    \n\
+- GL: 				jigglypuff --root			    \n\
+				metaballs --root			    \n\
+  GL: 				mirrorblob --root			    \n\
+				piecewise --root			    \n\
+  GL: 				polytopes --root			    \n\
+				pong --root				    \n\
+				popsquares --root			    \n\
+  GL: 				surfaces --root				    \n\
+				xanalogtv --root			    \n\
+				abstractile --root			    \n\
+				anemotaxis --root			    \n\
+- GL: 				antinspect --root			    \n\
+				fireworkx --root			    \n\
+				fuzzyflakes --root			    \n\
+				interaggregate --root			    \n\
+				intermomentary --root			    \n\
+				memscroller --root			    \n\
+  GL: 				noof --root				    \n\
+				pacman --root				    \n\
+  GL: 				pinion --root				    \n\
+  GL: 				polyhedra --root			    \n\
+- GL: 				providence --root			    \n\
+				substrate --root			    \n\
+				wormhole --root				    \n\
+- GL: 				antmaze --root				    \n\
+  GL: 				boing --root				    \n\
+				boxfit --root				    \n\
+  GL: 				carousel --root				    \n\
+				celtic --root				    \n\
+  GL: 				crackberg --root			    \n\
+  GL: 				cube21 --root				    \n\
+				fiberlamp --root			    \n\
+  GL: 				fliptext --root				    \n\
+  GL: 				glhanoi --root				    \n\
+  GL: 				tangram --root				    \n\
+  GL: 				timetunnel --root			    \n\
+  GL: 				glschool --root				    \n\
+  GL: 				topblock --root				    \n\
+  GL: 				cubicgrid --root			    \n\
+				cwaves --root				    \n\
+  GL: 				gears --root				    \n\
+  GL: 				glcells --root				    \n\
+  GL: 				lockward --root				    \n\
+				m6502 --root				    \n\
+  GL: 				moebiusgears --root			    \n\
+  GL: 				voronoi --root				    \n\
+  GL: 				hypnowheel --root			    \n\
+  GL: 				klein --root				    \n\
+-				lcdscrub --root				    \n\
+  GL: 				photopile --root			    \n\
+  GL: 				skytentacles --root			    \n\
+  GL: 				rubikblocks --root			    \n\
+  GL: 				companioncube --root			    \n\
+  GL: 				hilbert --root				    \n\
+  GL: 				tronbit --root				    \n\
+  GL: 				geodesic --root				    \n\
+				hexadrop --root				    \n\
+  GL: 				kaleidocycle --root			    \n\
+  GL: 				quasicrystal --root			    \n\
+  GL: 				unknownpleasures --root			    \n\
+				binaryring --root			    \n\
+  GL: 				cityflow --root				    \n\
+  GL: 				geodesicgears --root			    \n\
+  GL: 				projectiveplane --root			    \n\
+  GL: 				romanboy --root				    \n\
+				tessellimage --root			    \n\
+  GL: 				winduprobot --root			    \n\
+  GL: 				splitflap --root			    \n\
+  GL: 				cubestack --root			    \n\
+  GL: 				cubetwist --root			    \n\
+  GL: 				discoball --root			    \n\
+  GL: 				dymaxionmap --root			    \n\
+  GL: 				energystream --root			    \n\
+  GL: 				hexstrut --root				    \n\
+  GL: 				hydrostat --root			    \n\
+  GL: 				raverhoop --root			    \n\
+  GL: 				splodesic --root			    \n\
+  GL: 				unicrud --root				    \n\
+  GL: 				esper --root				    \n\
+  GL: 				vigilance --root			    \n\
+  GL: 				crumbler --root				    \n\
+				filmleader --root			    \n\
+				glitchpeg --root			    \n\
+  GL: 				handsy --root				    \n\
+  GL: 				maze3d --root				    \n\
+  GL: 				peepers --root				    \n\
+  GL: 				razzledazzle --root			    \n\
+				vfeedback --root			    \n\
+  GL: 				deepstars --root			    \n\
+  GL: 				gravitywell --root			    \n\
+  GL: 				beats --root				    \n\
+  GL: 				covid19 --root				    \n\
+  GL: 				etruscanvenus --root			    \n\
+  GL: 				gibson --root				    \n\
+  GL: 				headroom --root				    \n\
+  GL: 				sphereeversion --root			    \n\
+				binaryhorizon --root			    \n\
+				marbling --root				    \n\
+  GL: 				chompytower --root			    \n\
+  GL: 				hextrail --root				    \n\
+  GL: 				mapscroller --root			    \n\
+  GL: 				nakagin --root				    \n\
+  GL: 				squirtorus --root			    \n\
+  GL: 				cubocteversion --root			    \n\
+				droste --root				    \n\
+  GL: 				papercube --root			    \n\
+  GL: 				skulloop --root				    \n\
+
+
+pointerHysteresis:  10
+authWarningSlack:   20
+