.vim updated

This reverts commit 8c4b8a3f96.

.Xdefaults

@@ -1,4 +0,0 @@
-#include ".urxvt/Xdefaults"
-#include ".fonts/Xdefaults"
-
-! Xcursor.theme: gentoo-silver

.clang_complete

@@ -1,12 +0,0 @@
--DDEBUG
--I/usr/lib64/clang/3.1/include
--I/usr/lib64/gcc/x86_64-pc-linux-gnu/4.5.3/include/g++-v4
--I/usr/lib64/gcc/x86_64-pc-linux-gnu/4.5.3/include/g++-v4/x86_64-pc-linux-gnu
--I/usr/include/linux
--I/usr/lib64/gcc/x86_64-pc-linux-gnu/4.5.3/include
--I/usr/include/glib-2.0
--I/usr/include/glib-2.0/glib
--I/usr/lib/glib-2.0/include
--I/usr/include/glib-2.0/gio
--I/usr/include/glib-2.0/gobject
-

.config/LyX/lyx.conf

@@ -1,44 +0,0 @@
-[ui_files]
-0=/usr/share/lyx/ui/default.ui
-0\date=@Variant(\0\0\0\x10\0%x\xcd\x3j_\xd8\x1)
-
-[views]
-0\pos=@Point(3 30)
-0\size=@Size(1672 998)
-0\layout=@ByteArray(\0\0\0\xff\0\0\0\0\xfd\0\0\0\x2\0\0\0\0\0\0\0\0\0\0\0\0\xfc\x2\0\0\0\x1\xfb\0\0\0\x6\0t\0o\0\x63\0\0\0\0\0\xff\xff\xff\xff\0\0\x1[\0\xff\xff\xff\0\0\0\x3\0\0\0\0\0\0\0\0\xfc\x1\0\0\0\x1\xfb\0\0\0\x16\0v\0i\0\x65\0w\0-\0s\0o\0u\0r\0\x63\0\x65\0\0\0\0\0\xff\xff\xff\xff\0\0\x1\xb6\0\xff\xff\xff\0\0\x6\x88\0\0\x3\xa0\0\0\0\x4\0\0\0\x4\0\0\0\b\0\0\0\b\xfc\0\0\0\x1d\0\0\0\x2\0\0\0\x3\0\0\0\x10\0s\0t\0\x61\0n\0\x64\0\x61\0r\0\x64\x1\0\0\0\0\xff\xff\xff\xff\0\0\0\0\0\0\0\0\0\0\0\n\0\x65\0x\0t\0r\0\x61\x1\0\0\x2s\xff\xff\xff\xff\0\0\0\0\0\0\0\0\0\0\0\x16\0v\0i\0\x65\0w\0/\0u\0p\0\x64\0\x61\0t\0\x65\x1\0\0\x4\xfb\0\0\0P\0\0\0\0\0\0\0\0\0\0\0\x2\0\0\0\0\0\0\0\x2\0\0\0\x1\0\0\0\f\0r\0\x65\0v\0i\0\x65\0w\0\0\0\0\0\xff\xff\xff\xff\0\0\0\0\0\0\0\0\0\0\0\x2\0\0\0\0\0\0\0\x2\0\0\0\x1\0\0\0\x6\0v\0\x63\0s\0\0\0\0\0\xff\xff\xff\xff\0\0\0\0\0\0\0\0\0\0\0\x3\0\0\0\x1\0\0\0\n\0t\0\x61\0\x62\0l\0\x65\0\0\0\0\0\xff\xff\xff\xff\0\0\0\0\0\0\0\0\0\0\0\x3\0\0\0\x1\0\0\0\b\0m\0\x61\0t\0h\0\0\0\0\0\xff\xff\xff\xff\0\0\0\0\0\0\0\0\0\0\0\x3\0\0\0\x1\0\0\0\"\0m\0\x61\0t\0h\0m\0\x61\0\x63\0r\0o\0t\0\x65\0m\0p\0l\0\x61\0t\0\x65\0\0\0\0\0\xff\xff\xff\xff\0\0\0\0\0\0\0\0\0\0\0\x3\0\0\0\x1\0\0\0\x14\0m\0i\0n\0i\0\x62\0u\0\x66\0\x66\0\x65\0r\0\0\0\0\0\xff\xff\xff\xff\0\0\0\0\0\0\0\0\0\0\0\x3\0\0\0\x1\0\0\0\x16\0m\0\x61\0t\0h\0_\0p\0\x61\0n\0\x65\0l\0s\0\0\0\0\0\xff\xff\xff\xff\0\0\0\0\0\0\0\0\0\0\0\x3\0\0\0\x1\0\0\0\x12\0\x66\0u\0n\0\x63\0t\0i\0o\0n\0s\0\0\0\0\0\xff\xff\xff\xff\0\0\0\0\0\0\0\0\0\0\0\x3\0\0\0\x1\0\0\0\n\0s\0p\0\x61\0\x63\0\x65\0\0\0\0\0\xff\xff\xff\xff\0\0\0\0\0\0\0\0\0\0\0\x3\0\0\0\x1\0\0\0\x16\0s\0q\0r\0t\0-\0s\0q\0u\0\x61\0r\0\x65\0\0\0\0\0\xff\xff\xff\xff\0\0\0\0\0\0\0\0\0\0\0\x3\0\0\0\x1\0\0\0\n\0s\0t\0y\0l\0\x65\0\0\0\0\0\xff\xff\xff\xff\0\0\0\0\0\0\0\0\0\0\0\x3\0\0\0\x1\0\0\0\x16\0\x66\0r\0\x61\0\x63\0-\0s\0q\0u\0\x61\0r\0\x65\0\0\0\0\0\xff\xff\xff\xff\0\0\0\0\0\0\0\0\0\0\0\x3\0\0\0\x1\0\0\0\b\0\x66\0o\0n\0t\0\0\0\0\0\xff\xff\xff\xff\0\0\0\0\0\0\0\0\0\0\0\x3\0\0\0\x1\0\0\0\x14\0l\0\x61\0t\0\x65\0x\0_\0\x64\0o\0t\0s\0\0\0\0\0\xff\xff\xff\xff\0\0\0\0\0\0\0\0\0\0\0\x3\0\0\0\x1\0\0\0\x14\0l\0\x61\0t\0\x65\0x\0_\0\x64\0\x65\0\x63\0o\0\0\0\0\0\xff\xff\xff\xff\0\0\0\0\0\0\0\0\0\0\0\x3\0\0\0\x1\0\0\0\x16\0l\0\x61\0t\0\x65\0x\0_\0\x61\0r\0r\0o\0w\0\0\0\0\0\xff\xff\xff\xff\0\0\0\0\0\0\0\0\0\0\0\x3\0\0\0\x1\0\0\0\x12\0l\0\x61\0t\0\x65\0x\0_\0\x62\0o\0p\0\0\0\0\0\xff\xff\xff\xff\0\0\0\0\0\0\0\0\0\0\0\x3\0\0\0\x1\0\0\0\x14\0l\0\x61\0t\0\x65\0x\0_\0\x62\0r\0\x65\0l\0\0\0\0\0\xff\xff\xff\xff\0\0\0\0\0\0\0\0\0\0\0\x3\0\0\0\x1\0\0\0\x16\0l\0\x61\0t\0\x65\0x\0_\0g\0r\0\x65\0\x65\0k\0\0\0\0\0\xff\xff\xff\xff\0\0\0\0\0\0\0\0\0\0\0\x3\0\0\0\x1\0\0\0\x14\0l\0\x61\0t\0\x65\0x\0_\0m\0i\0s\0\x63\0\0\0\0\0\xff\xff\xff\xff\0\0\0\0\0\0\0\0\0\0\0\x3\0\0\0\x1\0\0\0\x16\0l\0\x61\0t\0\x65\0x\0_\0v\0\x61\0r\0s\0z\0\0\0\0\0\xff\xff\xff\xff\0\0\0\0\0\0\0\0\0\0\0\x3\0\0\0\x1\0\0\0\x1c\0l\0\x61\0t\0\x65\0x\0_\0\x61\0m\0s\0_\0m\0i\0s\0\x63\0\0\0\0\0\xff\xff\xff\xff\0\0\0\0\0\0\0\0\0\0\0\x3\0\0\0\x1\0\0\0 \0l\0\x61\0t\0\x65\0x\0_\0\x61\0m\0s\0_\0\x61\0r\0r\0o\0w\0s\0\0\0\0\0\xff\xff\xff\xff\0\0\0\0\0\0\0\0\0\0\0\x3\0\0\0\x1\0\0\0\x1a\0l\0\x61\0t\0\x65\0x\0_\0\x61\0m\0s\0_\0r\0\x65\0l\0\0\0\0\0\xff\xff\xff\xff\0\0\0\0\0\0\0\0\0\0\0\x3\0\0\0\x1\0\0\0\x1c\0l\0\x61\0t\0\x65\0x\0_\0\x61\0m\0s\0_\0n\0r\0\x65\0l\0\0\0\0\0\xff\xff\xff\xff\0\0\0\0\0\0\0\0\0\0\0\x3\0\0\0\x1\0\0\0\x1a\0l\0\x61\0t\0\x65\0x\0_\0\x61\0m\0s\0_\0o\0p\0s\0\0\0\0\0\xff\xff\xff\xff\0\0\0\0\0\0\0\0)
-0\icon_size=@Size(14 14)
-0\extra\visibility=5
-0\font\visibility=10
-0\frac-square\visibility=10
-0\functions\visibility=10
-0\latex_ams_arrows\visibility=10
-0\latex_ams_misc\visibility=10
-0\latex_ams_nrel\visibility=10
-0\latex_ams_ops\visibility=10
-0\latex_ams_rel\visibility=10
-0\latex_arrow\visibility=10
-0\latex_bop\visibility=10
-0\latex_brel\visibility=10
-0\latex_deco\visibility=10
-0\latex_dots\visibility=10
-0\latex_greek\visibility=10
-0\latex_misc\visibility=10
-0\latex_varsz\visibility=10
-0\math\visibility=200
-0\math_panels\visibility=200
-0\mathmacrotemplate\visibility=1096
-0\minibuffer\visibility=10
-0\review\visibility=580
-0\space\visibility=10
-0\sqrt-square\visibility=10
-0\standard\visibility=5
-0\style\visibility=10
-0\table\visibility=328
-0\vcs\visibility=6
-0\view\update\visibility=5
-0\aboutlyx\geometry=@ByteArray(\x1\xd9\xd0\xcb\0\x1\0\0\0\0\x1\x2\0\0\0\xaa\0\0\x2J\0\0\x1\xd6\0\0\x1\x3\0\0\0\xbc\0\0\x2I\0\0\x1\xd5\0\0\0\0\0\0)
-0\prefs\geometry=@ByteArray(\x1\xd9\xd0\xcb\0\x1\0\0\0\0\0\xdd\0\0\0\x17\0\0\x3\xc7\0\0\x1\xf8\0\0\0\xde\0\0\0)\0\0\x3\xc6\0\0\x1\xf7\0\0\0\0\0\0)
-0\toc\geometry=@ByteArray(\x1\xd9\xd0\xcb\0\x1\0\0\0\0\0\0\0\0\0\0\0\0\0\xcf\0\0\x1Z\0\0\0\0\0\0\0\0\0\0\0\xcf\0\0\x1Z\0\0\0\0\0\0)
-0\view-source\geometry=@ByteArray(\x1\xd9\xd0\xcb\0\x1\0\0\0\0\0\0\0\0\0\0\0\0\x1\xb5\0\0\0[\0\0\0\0\0\0\0\0\0\0\x1\xb5\0\0\0[\0\0\0\0\0\0)
-0\view-source\fullsource=false
-0\view-source\autoupdate=true

.config/geany/geany.conf

@@ -1,192 +0,0 @@
-
-[geany]
-default_open_path=/home/kolan
-cmdline_new_files=true
-notebook_double_click_hides_widgets=false
-tab_pos_sidebar=2
-highlighting_invert_all=false
-pref_main_suppress_search_dialogs=false
-pref_main_search_use_current_word=true
-check_detect_indent=false
-use_tab_to_indent=true
-pref_editor_tab_width=8
-indent_hard_tab_width=8
-indent_mode=2
-indent_type=1
-autocomplete_doc_words=false
-completion_drops_rest_of_word=false
-autocompletion_max_entries=30
-mru_length=10
-disk_check_timeout=30
-show_editor_scrollbars=true
-brace_match_ltgt=false
-use_gtk_word_boundaries=true
-complete_snippets_whilst_editing=false
-show_symbol_list_expanders=true
-allow_always_save=false
-use_safe_file_saving=false
-documents_show_paths=true
-sidebar_page=2
-pref_main_load_session=true
-pref_main_project_session=true
-pref_main_project_file_in_basedir=true
-pref_main_save_winpos=true
-pref_main_confirm_exit=false
-pref_main_suppress_status_messages=false
-switch_msgwin_pages=false
-beep_on_errors=true
-auto_focus=false
-sidebar_symbol_visible=true
-sidebar_openfiles_visible=true
-editor_font=Liberation Mono 8
-tagbar_font=Sans 8
-msgwin_font=Sans 8
-show_notebook_tabs=true
-show_tab_cross=true
-tab_order_ltr=true
-tab_pos_editor=2
-tab_pos_msgwin=0
-show_indent_guide=false
-show_white_space=false
-show_line_endings=false
-show_markers_margin=true
-show_linenumber_margin=true
-long_line_type=0
-long_line_column=72
-long_line_color=#C2EBC2
-symbolcompletion_max_height=10
-symbolcompletion_min_chars=4
-use_folding=true
-unfold_all_children=true
-use_indicators=true
-line_wrapping=true
-auto_close_xml_tags=true
-complete_snippets=true
-auto_complete_symbols=true
-pref_editor_disable_dnd=false
-pref_editor_smart_home_key=true
-pref_editor_newline_strip=true
-line_break_column=72
-auto_continue_multiline=true
-comment_toggle_mark=~ 
-scroll_stop_at_last_line=true
-autoclose_chars=31
-pref_editor_default_new_encoding=UTF-8
-pref_editor_default_open_encoding=WINDOWS-1251
-default_eol_character=2
-pref_editor_new_line=true
-pref_editor_replace_tabs=false
-pref_editor_trail_space=true
-pref_toolbar_show=true
-pref_toolbar_append_to_menu=false
-pref_toolbar_icon_style=0
-pref_toolbar_icon_size=0
-pref_template_developer=Kolan Sh.
-pref_template_company=InSys Ltd
-pref_template_mail=mecareful@gmail.com
-pref_template_initial=SNS
-pref_template_version=1.0
-pref_template_year=%Y
-pref_template_date=%Y-%m-%d
-pref_template_datetime=%d.%m.%Y %H:%M:%S %Z
-context_action_cmd=
-sidebar_visible=true
-statusbar_visible=true
-msgwindow_visible=true
-fullscreen=false
-scribble_text=
-scribble_pos=0
-treeview_position=0
-msgwindow_position=687
-geometry=3;30;1672;968;0;
-custom_date_format=
-sidebar_pos=0
-virtualspace=1
-color_scheme=
-compiler_tab_autoscroll=true
-tab_order_beside=false
-msgwin_status_visible=true
-msgwin_compiler_visible=true
-msgwin_messages_visible=true
-msgwin_scribble_visible=true
-use_native_windows_dialogs=false
-long_line_enabled=true
-pref_toolbar_use_gtk_default_style=false
-pref_toolbar_use_gtk_default_icon=true
-gio_unsafe_save_backup=false
-find_selection_type=0
-statusbar_template=
-new_document_after_close=false
-pref_editor_ensure_convert_line_endings=false
-
-[search]
-pref_search_current_file_dir=true
-find_all_expanded=false
-replace_all_expanded=true
-fif_mode=0
-fif_extra_options=
-fif_case_sensitive=true
-fif_match_whole_word=false
-fif_invert_results=false
-fif_recursive=false
-fif_use_extra_options=false
-position_find_x=90
-position_find_y=386
-position_replace_x=800
-position_replace_y=464
-position_fif_x=1154
-position_fif_y=409
-fif_regexp=false
-fif_files=
-fif_use_files=false
-
-[plugins]
-load_plugins=true
-custom_plugin_path=/home/kolan/.geany/plugins
-active_plugins=/usr/lib64/geany/codenav.so;/usr/lib64/geany/geanyextrasel.so;/usr/lib64/geany/geanylatex.so;/usr/lib64/geany/spellcheck.so;/usr/lib64/geany/treebrowser.so;/usr/lib64/geany/classbuilder.so;/usr/lib64/geany/saveactions.so;/usr/lib64/geany/addons.so;/usr/lib64/geany/splitwindow.so;/usr/lib64/geany/shiftcolumn.so;/usr/lib64/geany/htmlchars.so;/usr/lib64/geany/export.so;
-
-[tools]
-make_cmd=make
-term_cmd=urxvt
-browser_cmd=firefox
-grep_cmd=grep
-
-[printing]
-print_cmd=
-use_gtk_printing=true
-print_line_numbers=true
-print_page_numbers=true
-print_page_header=true
-page_header_basename=false
-page_header_datefmt=%c
-
-[VTE]
-load_vte=true
-emulation=xterm
-font=Terminus 10
-scroll_on_key=true
-scroll_on_out=true
-enable_bash_keys=false
-ignore_menu_bar_accel=false
-follow_path=true
-run_in_vte=true
-skip_run_script=false
-cursor_blinks=true
-scrollback_lines=500
-shell=/bin/bash
-colour_fore=#FFFFFF
-colour_back=#000000
-last_dir=/home/kolan/projects/dataserver
-send_selection_unsafe=false
-
-[project]
-session_file=/home/kolan/projects/dataserver/dataserver.geany
-project_file_path=/home/kolan/projects
-
-[files]
-recent_files=/home/kolan/projects/dataserver/netfuncs.h;/home/kolan/projects/dataserver/netfuncs.c;/home/kolan/projects/dataserver/mpool.h;/home/kolan/projects/dataserver/mpool.c;/home/kolan/projects/dataserver/xerror.c;/home/kolan/projects/dataserver/xerror.h;/home/kolan/projects/dataserver/xmalloc.h;/home/kolan/projects/dataserver/xmalloc.c;/home/kolan/dev/c/malloc_speed_test/pool_list.c;/home/kolan/projects/dataserver/dataserver.c;
-recent_projects=/home/kolan/projects/dataserver/dataserver.geany;dataserver.geany;/home/kolan/Projects/cpp/sockets/sockets.geany;/home/kolan/Projects/cpp/multithreading/pthread_ex.geany;/home/kolan/Projects/c/tmp2/tmp2.geany;/home/kolan/Projects/c/tmp1/tmp1.geany;/home/kolan/Projects/CPP/hello/hello.geany;/home/kolan/Projects/CPP/multithreading/pthread_ex.geany;/home/kolan/Projects/C/hello/hello.geany;
-current_page=0
-FILE_NAME_0=6788;C;0;16;1;1;1;/home/kolan/projects/dataserver/dataserver.c;0
-FILE_NAME_1=0;C;0;16;1;1;1;/home/kolan/projects/dataserver/dataserver.h;0
-FILE_NAME_2=0;C;0;16;1;1;1;/home/kolan/projects/dataserver/echo-client.c;0

.config/geany/keybindings.conf

@@ -1,245 +0,0 @@
-#Keybindings for Geany
-#The format looks like "<Control>a" or "<Shift><Alt>F1".
-#But you can also change the keys in Geany's preferences dialog.
-
-[Bindings]
-menu_new=<Control>n
-menu_open=<Control>o
-menu_open_selected=<Shift><Control>o
-menu_save=<Control>s
-menu_saveas=
-menu_saveall=<Shift><Control>s
-menu_print=<Control>p
-menu_close=<Control>w
-menu_closeall=<Shift><Control>w
-menu_reloadfile=<Control>r
-project_properties=
-menu_undo=<Control>z
-menu_redo=<Control>y
-edit_deleteline=<Control>k
-edit_duplicateline=<Control>d
-edit_transposeline=<Control>t
-edit_scrolltoline=<Shift><Control>l
-edit_scrolllineup=<Alt>Up
-edit_scrolllinedown=<Alt>Down
-edit_completesnippet=Tab
-edit_suppresssnippetcompletion=
-move_snippetnextcursor=
-popup_contextaction=
-edit_autocomplete=<Control>space
-edit_calltip=<Shift><Control>space
-edit_macrolist=<Control>Return
-edit_deletelinetoend=<Shift><Control>Delete
-menu_cut=<Control>x
-menu_copy=<Control>c
-menu_paste=<Control>v
-edit_cutline=<Shift><Control>x
-edit_copyline=<Shift><Control>c
-menu_selectall=<Control>a
-edit_selectword=<Shift><Alt>w
-edit_selectline=<Shift><Alt>l
-edit_selectparagraph=<Shift><Alt>p
-edit_togglecase=<Control><Alt>u
-edit_commentlinetoggle=<Control>e
-edit_commentline=
-edit_uncommentline=
-edit_increaseindent=<Control>i
-edit_decreaseindent=<Control>u
-edit_increaseindentbyspace=
-edit_decreaseindentbyspace=
-edit_autoindent=
-edit_sendtocmd1=<Control>1
-edit_sendtocmd2=<Control>2
-edit_sendtocmd3=<Control>3
-edit_sendtovte=
-format_reflowparagraph=<Control>j
-menu_insert_date=<Shift><Alt>d
-edit_insertwhitespace=
-menu_preferences=<Control><Alt>p
-menu_find=<Control>f
-menu_findnext=<Control>g
-menu_findprevious=<Shift><Control>g
-menu_findinfiles=<Shift><Control>f
-menu_replace=<Control>h
-menu_findnextsel=
-menu_findprevsel=
-menu_nextmessage=
-menu_previousmessage=
-popup_findusage=
-popup_finddocumentusage=
-find_markall=<Shift><Control>m
-nav_forward=
-nav_back=
-menu_gotoline=<Control>l
-edit_gotolinestart=Home
-edit_gotolineend=End
-edit_gotomatchingbrace=<Control>b
-edit_togglemarker=<Control>m
-edit_gotonextmarker=<Control>period
-edit_gotopreviousmarker=<Control>comma
-edit_prevwordstart=<Control>slash
-edit_nextwordstart=<Control>backslash
-popup_gototagdefinition=
-popup_gototagdeclaration=
-edit_gotolineendvisual=<Alt>End
-menu_toggleall=
-menu_fullscreen=F11
-menu_messagewindow=
-toggle_sidebar=
-menu_zoomin=<Control>plus
-menu_zoomout=<Control>minus
-switch_editor=F2
-switch_scribble=F6
-switch_vte=F4
-switch_search_bar=F7
-switch_sidebar=
-switch_compiler=
-switch_tableft=<Control>Page_Up
-switch_tabright=<Control>Page_Down
-switch_tablastused=<Control>Tab
-move_tableft=<Alt>Page_Up
-move_tabright=<Alt>Page_Down
-move_tabfirst=
-move_tablast=
-menu_replacetabs=
-menu_replacespaces=
-menu_togglefold=
-menu_foldall=
-menu_unfoldall=
-reloadtaglist=<Shift><Control>r
-menu_linewrap=
-menu_linebreak=
-build_compile=F8
-build_link=F9
-build_make=<Shift>F9
-build_makeowntarget=<Shift><Control>F9
-build_makeobject=
-build_nexterror=
-build_previouserror=
-build_run=F5
-build_run2=
-build_options=
-menu_opencolorchooser=
-menu_help=F1
-
-file_openlasttab=
-edit_wordpartcompletion=Tab
-edit_movelineup=
-edit_movelinedown=
-edit_selectwordpartleft=
-edit_selectwordpartright=
-menu_pluginpreferences=
-normal_size=<Control>0
-switch_messages=
-switch_message_window=
-switch_sidebar_doc_list=
-switch_sidebar_symbol_list=
-remove_markers=
-remove_error_indicators=
-
-[file_browser]
-focus_file_list=
-focus_path_entry=
-
-[split_window]
-split_horizontal=
-split_vertical=
-split_unsplit=
-
-[html_chars]
-insert_html_chars=
-replace_special_characters=
-htmltoogle_toggle_plugin_status=
-
-[code_navigation]
-switch_head_impl=<Shift><Alt>s
-goto_file=<Shift><Alt>g
-
-[extra_select]
-column_mode=
-goto_line_extend=
-brace_match_extend=
-
-[debug]
-"_Load"=
-"_Unload"=
-"_Run"=
-"_Kill"=
-"_Pause"=
-"_Continue"=
-"_Step"=
-"Step _Into"=
-"_Next"=
-"Ne_xt in"=
-"Run _To"=
-"Sta_ck"=
-"_Break"=
-"_Watches"=
-"_Finish"=
-"_Return"=
-"En_vironment"=
-"_Options"=
-
-[geanylatex]
-run_latex_wizard=
-insert_latex_label=
-insert_latex_ref=
-insert_new_line=
-latex_toggle_status=
-latex_insert_environment=
-latex_insert_item=
-latex_replace_chars=
-format_bold=
-format_italic=
-format_typewriter=
-format_center=
-format_left=
-format_right=
-insert_description_list=
-insert_itemize_list=
-insert_enumerate_list=
-structure_lvl_up=
-structure_lvl_down=
-usepackage_dialog=
-latex_insert_command=
-
-[geanylipsum]
-insert_lipsum=
-
-[sendmail]
-send_file_as_attachment=
-
-[geanyvc]
-vc_show_diff_of_file=
-vc_show_diff_of_dir=
-vc_show_diff_of_basedir=
-vc_commit=
-vc_status=
-vc_update=
-vc_revert_file=
-vc_revert_dir=
-vc_revert_basedir=
-
-[insert_numbers]
-insert_numbers=
-
-[spellcheck]
-spell_check=
-spell_toggle_typing=
-
-[prettyprinter]
-run_pretty_printer_xml=
-
-[doc_chars]
-Документация на слово под курсором=
-Document interactive=
-
-[addons]
-focus_bookmark_list=
-focus_tasks=
-update_tasks=
-xml_tagging=
-
-[shiftcolumn]
-shift_left=<Control>9
-shift_right=<Control>0

.config/geeqie/applications/Awesome BG 1.desktop

@@ -1,105 +0,0 @@
-[Desktop Entry]
-Version=1.0
-Type=Application
-
-# The name which appears in the menu:
-Name=Awesome BG 1
-#Name[cs]=Šablona
-#Name[fr]=Modèle
-#Name[de]=Vorlage
-
-# Replace "command" with the actual command or script:
-Exec=rm -f ~/.config/awesome/wallpaper1.slink ; ln -sf "%f" ~/.config/awesome/wallpaper1.slink ;  killall -s SIGHUP awesome
-
-# Where <param> may be:
-# omitted	If no parameter is given the command will be executed in the
-#        current folder. If a parameter is given but the current folder
-#        does not contain any files, the command will not be run.
-#
-# %f	 A single file name, even if multiple files are selected. The
-#        system reading the desktop entry should recognize that the program in
-#        question cannot handle multiple file arguments, and it should should
-#        probably spawn and execute multiple copies of a program for each
-#        selected file if the program is not able to handle additional file
-#        arguments. If files are not on the local file system (i.e. are on HTTP
-#        or FTP locations), the files will be copied to the local file system
-#        and %f will be expanded to point at the temporary file. Used for
-#        programs that do not understand the URL syntax.
-#
-# %F	A list of files. Use for apps that can open several local files
-#       at once. Each file is passed as a separate argument to the executable
-#       program.
-#
-# %u	A single URL. Local files may either be passed as file: URLs or
-#       as file path.
-#
-# %U	A list of URLs. Each URL is passed as a separate argument to
-#       the executable program. Local files may either be passed as file: URLs
-#       or as file path.
-#
-# %%    Percent sign. Use anywhere you want '%' to appear in your command.
-
-# Change the following line to point to an icon of your choosing
-Icon=gtk-file
-
-# Use the following to only show this menu entry if the command is installed
-#TryExec=command
-
-# Desktop files that are usable only in Geeqie should be marked like this:
-Categories=X-Geeqie;
-OnlyShowIn=X-Geeqie;
-
-# Uncomment the following line to include in a Geeqie menu
-# other than in the default path of PluginsMenu
-#X-Geeqie-Menu-Path=<FileMenuPath>
-
-# e.g.
-#X-Geeqie-Menu-Path=SelectMenu/SelectSection
-
-# Valid sections are:
-#    FileMenu
-#    FileMenu/OpenSection
-#    FileMenu/SearchSection
-#    FileMenu/PrintSection
-#    FileMenu/FileOpsSection
-#    FileMenu/QuitSection
-#    GoMenu
-#    SelectMenu
-#    SelectMenu/SelectSection
-#    SelectMenu/ClipboardSection
-#    SelectMenu/MarksSection
-#    EditMenu
-#    EditMenu/EditSection
-#    EditMenu/OrientationMenu
-#    EditMenu/RatingMenu
-#    EditMenu/PropertiesSection
-#    EditMenu/PreferencesSection
-#    PluginsMenu
-#    ViewMenu
-#    ViewMenu/WindowSection
-#    ViewMenu/FileDirMenu
-#    ViewMenu/FileDirMenu/FolderSection
-#    ViewMenu/FileDirMenu/ListSection
-#    ViewMenu/DirSection
-#    ViewMenu/ZoomMenu
-#    ViewMenu/ZoomMenu/ConnectZoomMenu
-#    ViewMenu/SplitMenu
-#    ViewMenu/StereoMenu
-#    ViewMenu/ColorMenu
-#    ViewMenu/OverlayMenu
-#    ViewMenu/ViewSection
-#    ViewMenu/ToolsSection
-#    ViewMenu/SlideShowSection
-#    WindowsMenu
-#    WindowsMenu/NewWindow
-#    HelpMenu
-#    HelpMenu/HelpSection
-
-# This is a filter - see symlink.desktop and geeqie-symlink for an example
-# of how to use this feature, or the Plugins section of the Help file.
-#X-Geeqie-Filter=true
-
-# It can be made verbose
-#X-Geeqie-Verbose=true
-
-# For other keys such as MimeType see https://developer.gnome.org/desktop-entry-spec/

.config/geeqie/applications/Awesome BG 2.desktop

@@ -1,105 +0,0 @@
-[Desktop Entry]
-Version=1.0
-Type=Application
-
-# The name which appears in the menu:
-Name=Awesome BG 2
-#Name[cs]=Šablona
-#Name[fr]=Modèle
-#Name[de]=Vorlage
-
-# Replace "command" with the actual command or script:
-Exec=rm -f ~/.config/awesome/wallpaper2.slink ; ln -sf "%f" ~/.config/awesome/wallpaper2.slink ;  killall -s SIGHUP awesome
-
-# Where <param> may be:
-# omitted	If no parameter is given the command will be executed in the
-#        current folder. If a parameter is given but the current folder
-#        does not contain any files, the command will not be run.
-#
-# %f	 A single file name, even if multiple files are selected. The
-#        system reading the desktop entry should recognize that the program in
-#        question cannot handle multiple file arguments, and it should should
-#        probably spawn and execute multiple copies of a program for each
-#        selected file if the program is not able to handle additional file
-#        arguments. If files are not on the local file system (i.e. are on HTTP
-#        or FTP locations), the files will be copied to the local file system
-#        and %f will be expanded to point at the temporary file. Used for
-#        programs that do not understand the URL syntax.
-#
-# %F	A list of files. Use for apps that can open several local files
-#       at once. Each file is passed as a separate argument to the executable
-#       program.
-#
-# %u	A single URL. Local files may either be passed as file: URLs or
-#       as file path.
-#
-# %U	A list of URLs. Each URL is passed as a separate argument to
-#       the executable program. Local files may either be passed as file: URLs
-#       or as file path.
-#
-# %%    Percent sign. Use anywhere you want '%' to appear in your command.
-
-# Change the following line to point to an icon of your choosing
-Icon=gtk-file
-
-# Use the following to only show this menu entry if the command is installed
-#TryExec=command
-
-# Desktop files that are usable only in Geeqie should be marked like this:
-Categories=X-Geeqie;
-OnlyShowIn=X-Geeqie;
-
-# Uncomment the following line to include in a Geeqie menu
-# other than in the default path of PluginsMenu
-#X-Geeqie-Menu-Path=<FileMenuPath>
-
-# e.g.
-#X-Geeqie-Menu-Path=SelectMenu/SelectSection
-
-# Valid sections are:
-#    FileMenu
-#    FileMenu/OpenSection
-#    FileMenu/SearchSection
-#    FileMenu/PrintSection
-#    FileMenu/FileOpsSection
-#    FileMenu/QuitSection
-#    GoMenu
-#    SelectMenu
-#    SelectMenu/SelectSection
-#    SelectMenu/ClipboardSection
-#    SelectMenu/MarksSection
-#    EditMenu
-#    EditMenu/EditSection
-#    EditMenu/OrientationMenu
-#    EditMenu/RatingMenu
-#    EditMenu/PropertiesSection
-#    EditMenu/PreferencesSection
-#    PluginsMenu
-#    ViewMenu
-#    ViewMenu/WindowSection
-#    ViewMenu/FileDirMenu
-#    ViewMenu/FileDirMenu/FolderSection
-#    ViewMenu/FileDirMenu/ListSection
-#    ViewMenu/DirSection
-#    ViewMenu/ZoomMenu
-#    ViewMenu/ZoomMenu/ConnectZoomMenu
-#    ViewMenu/SplitMenu
-#    ViewMenu/StereoMenu
-#    ViewMenu/ColorMenu
-#    ViewMenu/OverlayMenu
-#    ViewMenu/ViewSection
-#    ViewMenu/ToolsSection
-#    ViewMenu/SlideShowSection
-#    WindowsMenu
-#    WindowsMenu/NewWindow
-#    HelpMenu
-#    HelpMenu/HelpSection
-
-# This is a filter - see symlink.desktop and geeqie-symlink for an example
-# of how to use this feature, or the Plugins section of the Help file.
-#X-Geeqie-Filter=true
-
-# It can be made verbose
-#X-Geeqie-Verbose=true
-
-# For other keys such as MimeType see https://developer.gnome.org/desktop-entry-spec/

.config/geeqie/applications/Awesome BG 3.desktop

@@ -1,105 +0,0 @@
-[Desktop Entry]
-Version=1.0
-Type=Application
-
-# The name which appears in the menu:
-Name=Awesome BG 3
-#Name[cs]=Šablona
-#Name[fr]=Modèle
-#Name[de]=Vorlage
-
-# Replace "command" with the actual command or script:
-Exec=rm -f ~/.config/awesome/wallpaper3.slink ; ln -sf "%f" ~/.config/awesome/wallpaper3.slink ;  killall -s SIGHUP awesome
-
-# Where <param> may be:
-# omitted	If no parameter is given the command will be executed in the
-#        current folder. If a parameter is given but the current folder
-#        does not contain any files, the command will not be run.
-#
-# %f	 A single file name, even if multiple files are selected. The
-#        system reading the desktop entry should recognize that the program in
-#        question cannot handle multiple file arguments, and it should should
-#        probably spawn and execute multiple copies of a program for each
-#        selected file if the program is not able to handle additional file
-#        arguments. If files are not on the local file system (i.e. are on HTTP
-#        or FTP locations), the files will be copied to the local file system
-#        and %f will be expanded to point at the temporary file. Used for
-#        programs that do not understand the URL syntax.
-#
-# %F	A list of files. Use for apps that can open several local files
-#       at once. Each file is passed as a separate argument to the executable
-#       program.
-#
-# %u	A single URL. Local files may either be passed as file: URLs or
-#       as file path.
-#
-# %U	A list of URLs. Each URL is passed as a separate argument to
-#       the executable program. Local files may either be passed as file: URLs
-#       or as file path.
-#
-# %%    Percent sign. Use anywhere you want '%' to appear in your command.
-
-# Change the following line to point to an icon of your choosing
-Icon=gtk-file
-
-# Use the following to only show this menu entry if the command is installed
-#TryExec=command
-
-# Desktop files that are usable only in Geeqie should be marked like this:
-Categories=X-Geeqie;
-OnlyShowIn=X-Geeqie;
-
-# Uncomment the following line to include in a Geeqie menu
-# other than in the default path of PluginsMenu
-#X-Geeqie-Menu-Path=<FileMenuPath>
-
-# e.g.
-#X-Geeqie-Menu-Path=SelectMenu/SelectSection
-
-# Valid sections are:
-#    FileMenu
-#    FileMenu/OpenSection
-#    FileMenu/SearchSection
-#    FileMenu/PrintSection
-#    FileMenu/FileOpsSection
-#    FileMenu/QuitSection
-#    GoMenu
-#    SelectMenu
-#    SelectMenu/SelectSection
-#    SelectMenu/ClipboardSection
-#    SelectMenu/MarksSection
-#    EditMenu
-#    EditMenu/EditSection
-#    EditMenu/OrientationMenu
-#    EditMenu/RatingMenu
-#    EditMenu/PropertiesSection
-#    EditMenu/PreferencesSection
-#    PluginsMenu
-#    ViewMenu
-#    ViewMenu/WindowSection
-#    ViewMenu/FileDirMenu
-#    ViewMenu/FileDirMenu/FolderSection
-#    ViewMenu/FileDirMenu/ListSection
-#    ViewMenu/DirSection
-#    ViewMenu/ZoomMenu
-#    ViewMenu/ZoomMenu/ConnectZoomMenu
-#    ViewMenu/SplitMenu
-#    ViewMenu/StereoMenu
-#    ViewMenu/ColorMenu
-#    ViewMenu/OverlayMenu
-#    ViewMenu/ViewSection
-#    ViewMenu/ToolsSection
-#    ViewMenu/SlideShowSection
-#    WindowsMenu
-#    WindowsMenu/NewWindow
-#    HelpMenu
-#    HelpMenu/HelpSection
-
-# This is a filter - see symlink.desktop and geeqie-symlink for an example
-# of how to use this feature, or the Plugins section of the Help file.
-#X-Geeqie-Filter=true
-
-# It can be made verbose
-#X-Geeqie-Verbose=true
-
-# For other keys such as MimeType see https://developer.gnome.org/desktop-entry-spec/

.config/geeqie/applications/Awesome BG 4.desktop

@@ -1,105 +0,0 @@
-[Desktop Entry]
-Version=1.0
-Type=Application
-
-# The name which appears in the menu:
-Name=Awesome BG 4
-#Name[cs]=Šablona
-#Name[fr]=Modèle
-#Name[de]=Vorlage
-
-# Replace "command" with the actual command or script:
-Exec=rm -f ~/.config/awesome/wallpaper4.slink ; ln -sf "%f" ~/.config/awesome/wallpaper4.slink ;  killall -s SIGHUP awesome
-
-# Where <param> may be:
-# omitted	If no parameter is given the command will be executed in the
-#        current folder. If a parameter is given but the current folder
-#        does not contain any files, the command will not be run.
-#
-# %f	 A single file name, even if multiple files are selected. The
-#        system reading the desktop entry should recognize that the program in
-#        question cannot handle multiple file arguments, and it should should
-#        probably spawn and execute multiple copies of a program for each
-#        selected file if the program is not able to handle additional file
-#        arguments. If files are not on the local file system (i.e. are on HTTP
-#        or FTP locations), the files will be copied to the local file system
-#        and %f will be expanded to point at the temporary file. Used for
-#        programs that do not understand the URL syntax.
-#
-# %F	A list of files. Use for apps that can open several local files
-#       at once. Each file is passed as a separate argument to the executable
-#       program.
-#
-# %u	A single URL. Local files may either be passed as file: URLs or
-#       as file path.
-#
-# %U	A list of URLs. Each URL is passed as a separate argument to
-#       the executable program. Local files may either be passed as file: URLs
-#       or as file path.
-#
-# %%    Percent sign. Use anywhere you want '%' to appear in your command.
-
-# Change the following line to point to an icon of your choosing
-Icon=gtk-file
-
-# Use the following to only show this menu entry if the command is installed
-#TryExec=command
-
-# Desktop files that are usable only in Geeqie should be marked like this:
-Categories=X-Geeqie;
-OnlyShowIn=X-Geeqie;
-
-# Uncomment the following line to include in a Geeqie menu
-# other than in the default path of PluginsMenu
-#X-Geeqie-Menu-Path=<FileMenuPath>
-
-# e.g.
-#X-Geeqie-Menu-Path=SelectMenu/SelectSection
-
-# Valid sections are:
-#    FileMenu
-#    FileMenu/OpenSection
-#    FileMenu/SearchSection
-#    FileMenu/PrintSection
-#    FileMenu/FileOpsSection
-#    FileMenu/QuitSection
-#    GoMenu
-#    SelectMenu
-#    SelectMenu/SelectSection
-#    SelectMenu/ClipboardSection
-#    SelectMenu/MarksSection
-#    EditMenu
-#    EditMenu/EditSection
-#    EditMenu/OrientationMenu
-#    EditMenu/RatingMenu
-#    EditMenu/PropertiesSection
-#    EditMenu/PreferencesSection
-#    PluginsMenu
-#    ViewMenu
-#    ViewMenu/WindowSection
-#    ViewMenu/FileDirMenu
-#    ViewMenu/FileDirMenu/FolderSection
-#    ViewMenu/FileDirMenu/ListSection
-#    ViewMenu/DirSection
-#    ViewMenu/ZoomMenu
-#    ViewMenu/ZoomMenu/ConnectZoomMenu
-#    ViewMenu/SplitMenu
-#    ViewMenu/StereoMenu
-#    ViewMenu/ColorMenu
-#    ViewMenu/OverlayMenu
-#    ViewMenu/ViewSection
-#    ViewMenu/ToolsSection
-#    ViewMenu/SlideShowSection
-#    WindowsMenu
-#    WindowsMenu/NewWindow
-#    HelpMenu
-#    HelpMenu/HelpSection
-
-# This is a filter - see symlink.desktop and geeqie-symlink for an example
-# of how to use this feature, or the Plugins section of the Help file.
-#X-Geeqie-Filter=true
-
-# It can be made verbose
-#X-Geeqie-Verbose=true
-
-# For other keys such as MimeType see https://developer.gnome.org/desktop-entry-spec/

.config/geeqie/applications/Awesome BG.desktop

@@ -1,105 +0,0 @@
-[Desktop Entry]
-Version=1.0
-Type=Application
-
-# The name which appears in the menu:
-Name=Awesome BG
-#Name[cs]=Šablona
-#Name[fr]=Modèle
-#Name[de]=Vorlage
-
-# Replace "command" with the actual command or script:
-Exec=rm -f ~/.config/awesome/wallpaper.slink ; ln -sf "%f" ~/.config/awesome/wallpaper.slink ; ~/.config/awesome/set_wall.sh ~/.config/awesome/wallpaper.slink
-
-# Where <param> may be:
-# omitted	If no parameter is given the command will be executed in the
-#        current folder. If a parameter is given but the current folder
-#        does not contain any files, the command will not be run.
-#
-# %f	 A single file name, even if multiple files are selected. The
-#        system reading the desktop entry should recognize that the program in
-#        question cannot handle multiple file arguments, and it should should
-#        probably spawn and execute multiple copies of a program for each
-#        selected file if the program is not able to handle additional file
-#        arguments. If files are not on the local file system (i.e. are on HTTP
-#        or FTP locations), the files will be copied to the local file system
-#        and %f will be expanded to point at the temporary file. Used for
-#        programs that do not understand the URL syntax.
-#
-# %F	A list of files. Use for apps that can open several local files
-#       at once. Each file is passed as a separate argument to the executable
-#       program.
-#
-# %u	A single URL. Local files may either be passed as file: URLs or
-#       as file path.
-#
-# %U	A list of URLs. Each URL is passed as a separate argument to
-#       the executable program. Local files may either be passed as file: URLs
-#       or as file path.
-#
-# %%    Percent sign. Use anywhere you want '%' to appear in your command.
-
-# Change the following line to point to an icon of your choosing
-Icon=gtk-file
-
-# Use the following to only show this menu entry if the command is installed
-#TryExec=command
-
-# Desktop files that are usable only in Geeqie should be marked like this:
-Categories=X-Geeqie;
-OnlyShowIn=X-Geeqie;
-
-# Uncomment the following line to include in a Geeqie menu
-# other than in the default path of PluginsMenu
-#X-Geeqie-Menu-Path=<FileMenuPath>
-
-# e.g.
-#X-Geeqie-Menu-Path=SelectMenu/SelectSection
-
-# Valid sections are:
-#    FileMenu
-#    FileMenu/OpenSection
-#    FileMenu/SearchSection
-#    FileMenu/PrintSection
-#    FileMenu/FileOpsSection
-#    FileMenu/QuitSection
-#    GoMenu
-#    SelectMenu
-#    SelectMenu/SelectSection
-#    SelectMenu/ClipboardSection
-#    SelectMenu/MarksSection
-#    EditMenu
-#    EditMenu/EditSection
-#    EditMenu/OrientationMenu
-#    EditMenu/RatingMenu
-#    EditMenu/PropertiesSection
-#    EditMenu/PreferencesSection
-#    PluginsMenu
-#    ViewMenu
-#    ViewMenu/WindowSection
-#    ViewMenu/FileDirMenu
-#    ViewMenu/FileDirMenu/FolderSection
-#    ViewMenu/FileDirMenu/ListSection
-#    ViewMenu/DirSection
-#    ViewMenu/ZoomMenu
-#    ViewMenu/ZoomMenu/ConnectZoomMenu
-#    ViewMenu/SplitMenu
-#    ViewMenu/StereoMenu
-#    ViewMenu/ColorMenu
-#    ViewMenu/OverlayMenu
-#    ViewMenu/ViewSection
-#    ViewMenu/ToolsSection
-#    ViewMenu/SlideShowSection
-#    WindowsMenu
-#    WindowsMenu/NewWindow
-#    HelpMenu
-#    HelpMenu/HelpSection
-
-# This is a filter - see symlink.desktop and geeqie-symlink for an example
-# of how to use this feature, or the Plugins section of the Help file.
-#X-Geeqie-Filter=true
-
-# It can be made verbose
-#X-Geeqie-Verbose=true
-
-# For other keys such as MimeType see https://developer.gnome.org/desktop-entry-spec/

.config/gtk-3.0/gtk.css

@@ -1,12 +0,0 @@
-.window-frame {
-  box-shadow: none;
-  margin: 0;
-}
-.scrollbar.vertical slider,
-scrollbar.vertical slider {
-min-width: 12px;
-}
-.scrollbar.horizontal slider,
-scrollbar.horizontal slider {
-min-height: 12px;
-}

.config/gtk-3.0/settings.ini

@@ -1,22 +0,0 @@
-[Settings]
-#gtk-theme-name = Zukitwo
-
-gtk-font-name=Liberation Sans 12
-gtk-toolbar-style=GTK_TOOLBAR_ICONS
-
-gtk-enable-animations = 0
-
-gtk-menu-images=0
-gtk-button-images=0
-
-#gtk-icon-theme-name= oxygen
-#gtk-fallback-icon-theme=oxygen
-
-#gtk-cursor-theme-name = gentoo-silver
-gtk-cursor-theme-size = 24
-
-#gtk-xft-antialias = 1
-#gtk-xft-dpi = 90
-#gtk-xft-hinting = 1
-#gtk-xft-hintstyle = hintslight
-#gtk-xft-rgba = rgb

.config/mc/ini

@@ -101,16 +101,13 @@ filepos_max_saved_entries=1024
 preallocate_space=false
 editor_group_undo=false
 
+editor_drop_selection_on_copy=true
 editor_cursor_after_inserted_block=false
-
+editor_state_full_filename=false
 editor_ask_filename_before_edit=false
 editor_filesize_threshold=64M
-
-editor_drop_selection_on_copy=true
 editor_stop_format_chars=-+*\\,.;:&>
 
-editor_state_full_filename=false
-
 safe_overwrite=false
 
 shadows=true
@@ -196,9 +193,6 @@ select_flags=6
 
 panel_scroll_center=false
 
-[HotlistConfig]
-expanded_view_of_groups=0
-
 [Panelize]
 Найти корректуры, отвергнутые командой patch=find . -name \\*.rej -print
 Найти оригиналы (*.orig) после команды patch=find . -name \\*.orig -print

.config/mpv/config

@@ -1,13 +0,0 @@
-# Write your default config options here!
-[default]
-stop-screensaver="yes"
-#heartbeat-cmd="xscreensaver-command -deactivate &"
-
-save-position-on-quit=yes
-#subcp=enca:ru:utf8
-#hwdec=vaapi
-#hwdec=vdpau
-#fullscreen=yes
-vo=gpu
-
-#osd-status-msg=${playback-time/full} / ${duration} (${percent-pos}%)\nframe: ${estimated-frame-number} / ${estimated-frame-count}

.config/mpv/input.conf

@@ -1,4 +0,0 @@
-Esc quit
-Enter quit
-WHEEL_UP seek 1
-WHEEL_DOWN seek -1

.config/tumbler/tumbler.rc

@@ -1,97 +0,0 @@
-###
-# [TypeNameOfPlugin]
-# Disabled:    Set to true to avoid loading the plugin. By default all
-#              plugins are loaded.
-# Priority:    Priority of the plugin if more plugins support the same
-#              uri-scheme / mime-type combination.
-# Locations:   ;-separated path list the plugin will be used in. If the
-#              source file is not a child of one of the locations, the
-#              plugin won't be used and another plugin with a lower
-#              priority will be tried.
-#              Absolute paths, environement variables, ~/ and ~username/
-#              are allowed. Leave empty to allow all locations.
-# MaxFileSize: Maximum size of the source file the plugin will still
-#              try to generate a plugin for. The size is in bytes,
-#              0 disabled the check.
-#
-# For more information see http://docs.xfce.org/xfce/thunar/tumbler
-###
-
-###
-# Image Thumbnailers
-###
-
-# Jpeg thumbnailer (from exif data if possible)
-[JPEGThumbnailer]
-Disabled=false
-Priority=3
-Locations=
-MaxFileSize=0
-
-# Supports all type GdkPixbuf supports
-[PixbufThumbnailer]
-Disabled=false
-Priority=2
-Locations=
-MaxFileSize=0
-
-# RAW image files using libopenraw
-[RawThumbnailer]
-Disabled=false
-Priority=1
-Locations=
-MaxFileSize=0
-
-###
-# Video Thumbnailers
-###
-
-# Download cover from omdbapi.com or themoviedb.org if an
-# API key is given. This plugin is disabled because it
-# sends your (private) movie names over the internet.
-[CoverThumbnailer]
-Disabled=true
-Priority=3
-Locations=~/movies
-MaxFileSize=0
-#APIKey=your-api-key-from-themoviedb.org
-
-# ffmpegthumbnailer plugin
-[FfmegThumbnailer]
-Disabled=false
-Priority=2
-Locations=
-MaxFileSize=0
-
-# GStreamer plugin
-[GstThumbnailer]
-Disabled=true
-Priority=1
-Locations=
-MaxFileSize=0
-
-###
-# Other Thumbnailers
-###
-
-# FreeType thumbnailer
-[FontThumbnailer]
-Disabled=false
-Priority=1
-Locations=
-MaxFileSize=0
-
-
-# PDF/PS thumbnailer
-[PopplerThumbnailer]
-Disabled=false
-Priority=1
-Locations=
-MaxFileSize=0
-
-# Open document thumbnailer (ODF)
-[OdfThumbnailer]
-Disabled=false
-Priority=1
-Locations=
-MaxFileSize=0

.config/user-dirs.dirs

@@ -1,8 +0,0 @@
-XDG_DESKTOP_DIR="$HOME/.big/tmp/desktop/"
-XDG_DOCUMENTS_DIR="$HOME/.big/tmp/documents"
-XDG_MUSIC_DIR="$HOME/.big/tmp/music"
-XDG_PICTURES_DIR="$HOME/.big/tmp/pictures"
-XDG_VIDEOS_DIR="$HOME/.big/tmp/videos"
-XDG_DOWNLOAD_DIR="$HOME/.big/download"
-XDG_TEMPLATES_DIR="$HOME/.big/templates"
-XDG_PUBLICSHARE_DIR="$HOME/.big/shares"

.fonts/Xdefaults

@@ -1,6 +0,0 @@
-! Xft.dpi: 99.0
-Xft.rgba: none
-Xft.antialias: true
-Xft.autohint: false
-Xft.hinting: true
-Xft.hintstyle: hintfull

.gqview/gqviewrc

@@ -1,243 +0,0 @@
-######################################################################
-#                         GQview config file         version   2.1.5 #
-######################################################################
-
-# Note: This file is autogenerated. Options can be changed here,
-#       but user comments and formatting will be lost.
-
-##### General Options #####
-
-layout_style: 0
-
-layout_order: "123"
-
-layout_view_as_icons: true
-
-layout_view_as_tree: true
-
-show_icon_names: true
-
-
-tree_descend_folders: false
-
-lazy_image_sync: false
-
-update_on_time_change: true
-
-exif_auto_rotate: true
-
-
-enable_startup_path: false
-
-startup_path: 
-
-zoom_mode: fit
-two_pass_scaling: true
-
-zoom_to_fit_allow_expand: true
-
-
-fit_window_to_image: true
-
-limit_window_size: false
-
-max_window_size: 100
-
-
-progressive_keyboard_scrolling: false
-
-scroll_reset_method: 0
-
-
-enable_thumbnails: false
-
-thumbnail_width: 96
-
-thumbnail_height: 72
-
-cache_thumbnails: true
-
-cache_thumbnails_into_dirs: false
-
-thumbnail_fast: true
-
-use_xvpics_thumbnails: true
-
-thumbnail_spec_standard: true
-
-
-local_metadata: false
-
-
-sort_method: 1
-
-sort_ascending: true
-
-sort_case_sensitive: false
-
-
-confirm_delete: true
-
-enable_delete_key: true
-
-safe_delete: false
-
-safe_delete_path: "/home/kolan/.gqview/trash"
-safe_delete_size: 20
-
-
-tools_float: false
-
-tools_hidden: false
-
-restore_tool_state: false
-
-toolbar_hidden: false
-
-mouse_wheel_scrolls: false
-
-in_place_rename: true
-
-open_recent_max: 10
-
-image_cache_size_max: 10
-
-thumbnail_quality: 1
-
-zoom_quality: 2
-
-dither_quality: 1
-
-zoom_increment: 5
-
-enable_read_ahead: true
-
-display_dialogs_under_mouse: false
-
-black_window_background: false
-
-fullscreen_screen: -1
-
-fullscreen_clean_flip: false
-
-fullscreen_disable_saver: true
-
-fullscreen_above: false
-
-custom_similarity_threshold: 99
-
-
-##### Slideshow Options #####
-
-slideshow_delay: 15.0
-
-slideshow_random: false
-
-slideshow_repeat: false
-
-
-##### Filtering Options #####
-
-show_dotfiles: false
-
-disable_filtering: false
-
-filter_ext: "icns" ".icns" "Формат изображений ICNS"
-filter_ext: "gif" ".gif" "Формат изображений GIF"
-filter_ext: "bmp" ".bmp" "Формат изображений BMP"
-filter_ext: "pnm" ".pnm;.pbm;.pgm;.ppm" "Семейство форматов изображений PNM/PBM/PGM/PPM"
-filter_ext: "ico" ".ico;.cur" "Формат изображений ICO"
-filter_ext: "ani" ".ani" "Формат изображений ANI"
-filter_ext: "tga" ".tga;.targa" "Формат изображений Targa"
-filter_ext: "ras" ".ras" "Формат растровых изображений компании Sun"
-filter_ext: "jpeg" ".jpeg;.jpe;.jpg" "Формат изображений JPEG"
-filter_ext: "qtif" ".qtif;.qif" "Формат изображений QTIF"
-filter_ext: "xbm" ".xbm" "Формат изображений XBM"
-filter_ext: "pcx" ".pcx" "Формат изображений PCX"
-filter_ext: "xpm" ".xpm" "Формат изображения XPM"
-filter_ext: "wbmp" ".wbmp" "Формат изображений WBMP"
-filter_ext: "png" ".png" "Формат изображений PNG"
-filter_ext: "#tiff" ".tif;.tiff" "Tiff"
-filter_ext: "#svg" ".svg" "Scalable Vector Graphics"
-filter_ext: "crw" ".crw;.cr2" "Canon raw format"
-filter_ext: "raf" ".raf" "Fujifilm raw format"
-filter_ext: "nef" ".nef" "Nikon raw format"
-filter_ext: "orf" ".orf" "Olympus raw format"
-filter_ext: "pef" ".pef" "Pentax raw format"
-
-##### Color Profiles #####
-
-# NOTICE: GQview was not built with support for color profiles,
-#         color profile options will have no effect.
-
-color_profile_enabled: false
-
-color_profile_use_image: true
-
-color_profile_input_type: 0
-
-color_profile_input_file_1: 
-color_profile_input_name_1: 
-color_profile_input_file_2: 
-color_profile_input_name_2: 
-color_profile_input_file_3: 
-color_profile_input_name_3: 
-color_profile_input_file_4: 
-color_profile_input_name_4: 
-
-color_profile_screen_type: 0
-
-color_profile_screen_file_1: 
-
-##### External Programs #####
-# Maximum of 10 programs (external_1 through external_10)
-# format: external_n: "menu name" "command line"
-
-external_1: "The Gimp" "gimp -n %f"
-external_2: "XV" "xv %f"
-external_3: "Xpaint" "xpaint %f"
-external_4: "Awesome BG" "rm ~/.config/awesome/wallpaper.slink; ln -sf %f ~/.config/awesome/wallpaper.slink && ~/.config/awesome/set_wall.sh ~/.config/awesome/wallpaper.slink"
-external_5: "Awesome 1 BG" "rm ~/.config/awesome/wallpaper1.slink; ln -sf %f ~/.config/awesome/wallpaper1.slink; killall -s SIGHUP awesome"
-external_6: "Awesome 2 BG" "rm ~/.config/awesome/wallpaper2.slink; ln -sf %f ~/.config/awesome/wallpaper2.slink; killall -s SIGHUP awesome"
-external_7: "Awesome 3 BG" "rm ~/.config/awesome/wallpaper3.slink; ln -sf %f ~/.config/awesome/wallpaper3.slink; killall -s SIGHUP awesome"
-external_8: "" ""
-external_9: "Повернуть jpeg по часовой стрелк" "%vif jpegtran -rotate 90 -copy all -outfile %p_tmp %p; then mv %p_tmp %p;else rm %p_tmp;fi"
-external_10: "Повернуть jpeg против часовой ст" "%vif jpegtran -rotate 270 -copy all -outfile %p_tmp %p; then mv %p_tmp %p;else rm %p_tmp;fi"
-
-##### Collection Options #####
-
-rectangular_selections: false
-
-
-##### Window Positions #####
-
-restore_window_positions: false
-
-
-main_window_x: 219
-
-main_window_y: 43
-
-main_window_width: 700
-
-main_window_height: 500
-
-main_window_maximized: false
-
-float_window_x: 0
-
-float_window_y: 0
-
-float_window_width: 260
-
-float_window_height: 450
-
-float_window_divider: 200
-
-divider_position_h: 270
-
-divider_position_v: 200
-
-######################################################################
-#                      end of GQview config file                     #
-######################################################################

.gtkrc-2.0

@@ -1,18 +1,16 @@
 # -- THEME AUTO-WRITTEN DO NOT EDIT
-include "/usr/share/themes/Adwaita/gtk-2.0/gtkrc"
+include "/usr/share/themes/Equinox/gtk-2.0/gtkrc"
 
 style "user-font" {
-	font_name = "Liberation Sans 12"
+	font_name = "Liberation Sans 8"
 }
 
 widget_class "*" style "user-font"
 
-gtk-font-name="Liberation Sans 12"
+gtk-font-name="Liberation Sans 8"
 
-gtk-theme-name  = "Adwaita"
+gtk-theme-name  = "Equinox"
 
 include "/home/kolan/.gtkrc.mine"
 
-#gtk-cursor-theme-name = "gentoo-silver"
-
 # -- THEME AUTO-WRITTEN DO NOT EDIT

.hgrc

@@ -5,7 +5,6 @@ username = Kolan Sh <backbone@backbone.ws>
 bitbucket.org=3f:d3:c5:17:23:3c:cd:f5:2d:17:76:06:93:7e:ee:97:42:21:14:aa
 hg.backbone.ws=1d:5d:e2:95:c6:ee:1a:63:9a:9b:09:79:f6:30:a9:2a:50:7d:4e:09
 hg.insysltd.ru=ec:ff:06:cf:59:88:ae:58:eb:f4:79:30:56:f7:36:c2:dd:52:a9:41
-hg.insysltd.org=ec:ff:06:cf:59:88:ae:58:eb:f4:79:30:56:f7:36:c2:dd:52:a9:41
 
 [ui]
 verbose = true

.local/share/Trash

@@ -1 +0,0 @@
-/dev/null

.mplayer/config

@@ -1,19 +0,0 @@
-[default]
-# Write your default config options here!
-#heartbeat-cmd="(nice -n 20 /usr/bin/xscreensaver-command -deactivate >/dev/null 2>&1)&"
-#heartbeat-cmd="xset dpms force on"
-heartbeat-cmd="xscreensaver-command -deactivate"
-#stop-xscreensaver=no
-audiofile-cache=5000
-cache=16000
-cache-min=30
-cache-seek-min=30
-#af=equalizer=5:5:5:0:0:0:-2:-2:-2
-
-
-[gnome-mplayer]
-#vo=vdpau
-ao=alsa
-alang=Russian,rus,ru
-slang=Russian,rus,ru
-msglevel=all=5

.urxvt/Xdefaults

@@ -1,33 +0,0 @@
-URxvt.cursorBlink:      true
-URxvt*font:-xos4-terminus-medium-r-normal--14-*-*-*-*-*-*
-URxvt*scrollstyle:      next
-URxvt.url-launcher:      firefox
-URxvt.matcher.button:   1
-URxvt.colorUL:          blue
-URxvt*saveLines:        32768
-URxvt.tabbed.tabbar-fg:     7
-URxvt.tabbed.tabbar-bg:     8
-URxvt.tabbed.tab-fg:        0
-URxvt.tabbed.tab-bg:        15
-URxvt.geometry:         96x32
-URxvt*perl-ext: tabbedex,matcher
-
-URxvt*color0: #444444
-URxvt*color1: #aa0000
-URxvt*color2: #00aa00
-URxvt*color3: #999900
-URxvt*color4: #0000aa
-URxvt*color5: #990099
-URxvt*color6: #009999
-URxvt*color7: grey
-
-URxvt*color8: #1E2320
-URxvt*color9: #cc0000
-URxvt*color10: #00cc00
-URxvt*color11: #bbbb00
-URxvt*color12: #0000cc
-URxvt*color13: #bb00bb
-URxvt*color14: #00bbbb
-URxvt*color15: white
-
-Xcursor.size: 24

.urxvt/ext/tabbedex

@@ -1,697 +0,0 @@
-#! perl
-# This program is free software: you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation, either version 3 of the License, or
-# (at your option) any later version.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-
-# You should have received a copy of the GNU General Public License
-# along with this program.  If not, see <http://www.gnu.org/licenses/>.
-#
-##
-## Tabbed plugin for rxvt-unicode
-## Modified by Michal Nazarewicz (mina86/AT/mina86.com), StephenB
-## (mail4stb/AT/gmail.com), Steven Merrill
-## <steven dot merrill at gmail.com>, Mark Pustjens
-## <pustjens@dds.nl> and more...
-##
-## The following has been added:
-##
-## 1. Depending on time of last activity, activity character differs.
-##    By default, after 4 seconds an asterisk becomes a plus sing,
-##    after next 4 it becomes a colon, and finally, after another 8
-##    seconds it becomes a dot.  This can be configured via
-##    tabbar-timeouts resource.  It's format is:
-##
-##      ( <timeout> ":" <character> ":" )* <timeout> ":" <character> ":"
-##
-##    where <timeout> is timeout in seconds and <character> is
-##    a single activity character.
-##
-## 2. The "[NEW]" button can be disabled (who on Earth uses mouse to
-##    create new tab anyways?) by setting new-button resource to yes.
-##
-## 3. If title resource is true, tab's title is displayed after last
-##    button.  This is handy if you have terminal with no window
-##    decorations.  Colours can be configured via title-fg and
-##    title-bg.
-##
-## 4. Incorporated Alexey Semenko <asemenko at gmail.com> patch adding
-##    autohide resource.  If it's true tab bar is hidden if there is
-##    no more then one tab opened.
-##
-## 5. Tabs are indexed in starting with zero hex. :] If you're such
-##    a geek to use urxvt it shouldn't be a problem for you and it
-##    saves few character when many tabs are opened.
-##
-## 6. As a minor modification: Final pipe character is removed (unless
-##    title is displayed).  This make tab bar look nicer.
-##
-## Added by StephenB:
-## 
-## 7. Tabs can be named with Shift+Up (Enter to confirm, Escape to
-##    cancel).
-##
-## 8. "[NEW]" button disabled by default.
-##
-## Added by Steven Merrill <steven dot merrill at gmail.com>
-##
-## 9. Ability to start a new tab or cycle through tabs via user
-##    commands: tabbedex:(new|next|prev)_tab .
-##    e.g. (in .Xdefaults) URxvt.keysym.M-t: perl:tabbedex:new_tab
-##    (see the urxvt man file for more info about keysym)
-##
-## 10. Fix an issue whereby on_user_command would not properly get sent
-##     to other extension packages if the mouse was not over the urxvt
-##     window.
-##
-## Added by Thomas Jost:
-##
-## 11. Add several user commands: tabbedex:rename_tab,
-##     tabbedex:move_tab_(left|right).
-##     e.g. (see 9.) URxvt.keysym.C-S-Left: perl:tabbex:move_tab_left
-##
-## 12. Ability to disable the default keybindings using the
-##     no-tabbedex-keys resource.
-##
-## Added by xanf (Illya Klymov):
-##
-## 13. Ability to display non-latin characters in tab title.
-##
-## Added by jpkotta:
-##
-## 14. Tabs inherit command line options.
-##
-## Added by Mark Pustjens <pustjens@dds.nl>
-##
-## 15. Resources are now read respecting the -name option.
-##
-## 16. Ability to prevent the last tab from closing.
-##     Use the following in your ~/.Xdefaults to enable:
-##     URXvt.tabbed.reopen-on-close: yes
-##
-
-use Encode qw(decode);
-
-sub update_autohide {
-   my ($self, $reconfigure) = @_;
-   my $oldh = $self->{tabheight};
-   if ($self->{autohide} && @{ $self->{tabs} } <= 1 &&
-         ! (@{ $self->{tabs} } == 1 && $self->{tabs}[-1]->{name})) {
-      $self->{tabheight} = 0;
-   } else {
-      $self->{tabheight} = $self->{maxtabheight};
-   }
-   if ($reconfigure && $self->{tabheight} != $oldh) {
-      $self->configure;
-      $self->copy_properties;
-   }
-}
-
-
-sub tab_activity_mark ($$) {
-   my ($self, $tab) = @_;
-   return ' ' unless defined $tab->{lastActivity};
-   return ' ' if $tab == $self->{cur};
-   if (defined $self->{timeouts}) {
-      my $diff = int urxvt::NOW - $tab->{lastActivity};
-      for my $spec (@{ $self->{timeouts} }) {
-         return $spec->[1] if $diff > $spec->[0];
-      }
-   }
-   '*';
-}
-
-
-sub refresh {
-   my ($self) = @_;
-
-   # autohide makes it zero
-   return unless $self->{tabheight};
-
-   my $ncol = $self->ncol;
-
-   my $text = " " x $ncol;
-   my $rend = [($self->{rs_tabbar}) x $ncol];
-
-   my ($ofs, $idx, @ofs) = (0, 0);
-
-   if ($self->{new_button}) {
-      substr $text, 0, 7, "[NEW] |";
-      @$rend[0 .. 5] = ($self->{rs_tab}) x 6;
-      push @ofs, [0, 6, -1 ];
-      $ofs = 7;
-   }
-
-   for my $tab (@{ $self->{tabs} }) {
-      my $name = $tab->{name} ? $tab->{name} : $idx;
-      my $act = $self->tab_activity_mark($tab);
-      my $txt = sprintf "%s%s%s", $act, $name, $act;
-      my $len = length $txt;
-
-      substr $text, $ofs, $len + 1, "$txt|";
-      @$rend[$ofs .. $ofs + $len - 1] = ($self->{rs_tab}) x $len
-         if $tab == $self->{cur};
-
-      push @ofs, [ $ofs, $ofs + $len, $idx ];
-      ++$idx;
-      $ofs += $len + 1;
-   }
-
-   substr $text, --$ofs, 1, ' '; # remove last '|'
-
-   if ($self->{tab_title} && $ofs + 3 < $ncol) {
-      my $term = $self->{term};
-      my @str = $term->XGetWindowProperty($term->parent, $self->{tab_title});
-      if (@str && $str[2]) {
-         my $str = '| ' . decode("utf8", $str[2]);
-         my $len = length $str;
-         $len = $ncol - $ofs if $ofs + $len > $ncol;
-         substr $text, $ofs, $len, substr $str, 0, $len;
-         @$rend[$ofs + 2 .. $ofs + $len - 1] = ($self->{rs_title}) x ($len - 2);
-      }
-   }
-
-   $self->{tabofs} = \@ofs;
-
-   $self->ROW_t (0, $text, 0, 0, $ncol);
-   $self->ROW_r (0, $rend, 0, 0, $ncol);
-
-   $self->want_refresh;
-}
-
-
-sub new_tab {
-   my ($self, @argv) = @_;
-
-   my $offset = $self->fheight;
-
-   $self->{tabheight} = $self->{maxtabheight}
-   unless $self->{autohide} && !(defined $self->{tabs} && @{ $self->{tabs} });
-
-   # save a backlink to us, make sure tabbedex is inactive
-   push @urxvt::TERM_INIT, sub {
-      my ($term) = @_;
-      $term->{parent} = $self;
-
-      for (0 .. urxvt::NUM_RESOURCES - 1) {
-         my $value = $self->{resource}[$_];
-
-         $term->resource ("+$_" => $value)
-            if defined $value;
-      }
-
-      $term->resource (perl_ext_2 => $term->resource ("perl_ext_2") . ",-tabbedex");
-   };
-
-   push @urxvt::TERM_EXT, urxvt::ext::tabbedex::tab::;
-
-   my $term = new urxvt::term
-      $self->env, $urxvt::RXVTNAME,
-      -embed => $self->parent,
-      @argv;
-}
-
-
-sub configure {
-   my ($self) = @_;
-
-   my $tab = $self->{cur};
-
-   # this is an extremely dirty way to force a configurenotify, but who cares
-   $tab->XMoveResizeWindow (
-      $tab->parent,
-      0, $self->{tabheight} + 1,
-      $self->width, $self->height - $self->{tabheight}
-   );
-   $tab->XMoveResizeWindow (
-      $tab->parent,
-      0, $self->{tabheight},
-      $self->width, $self->height - $self->{tabheight}
-   );
-}
-
-
-sub copy_properties {
-   my ($self) = @_;
-   my $tab = $self->{cur};
-
-   my $wm_normal_hints = $self->XInternAtom ("WM_NORMAL_HINTS");
-
-   my $current = delete $self->{current_properties};
-
-   # pass 1: copy over properties different or nonexisting
-   for my $atom ($tab->XListProperties ($tab->parent)) {
-      my ($type, $format, $items) = $self->XGetWindowProperty ($tab->parent, $atom);
-
-      # fix up size hints
-      if ($atom == $wm_normal_hints) {
-         my (@hints) = unpack "l!*", $items;
-
-         $hints[$_] += $self->{tabheight} for (4, 6, 16);
-
-         $items = pack "l!*", @hints;
-      }
-
-      my $cur = delete $current->{$atom};
-
-      # update if changed, we assume empty items and zero type and format will not happen
-      $self->XChangeProperty ($self->parent, $atom, $type, $format, $items)
-         if $cur->[0] != $type or $cur->[1] != $format or $cur->[2] ne $items;
-
-      $self->{current_properties}{$atom} = [$type, $format, $items];
-   }
-
-   # pass 2, delete all extraneous properties
-   $self->XDeleteProperty ($self->parent, $_) for keys %$current;
-}
-
-
-sub my_resource {
-   my $self = shift;
-   $self->x_resource ("tabbed.$_[0]");
-}
-
-
-sub make_current {
-   my ($self, $tab) = @_;
-
-   if (my $cur = $self->{cur}) {
-      delete $cur->{lastActivity};
-      $cur->XUnmapWindow ($cur->parent) if $cur->mapped;
-      $cur->focus_out;
-   }
-
-   $self->{cur} = $tab;
-
-   $self->configure;
-   $self->copy_properties;
-
-   $tab->focus_out; # just in case, should be a nop
-   $tab->focus_in if $self->focus;
-
-   $tab->XMapWindow ($tab->parent);
-   delete $tab->{lastActivity};
-   $self->refresh;
-
-   ();
-}
-
-
-sub on_focus_in {
-   my ($self, $event) = @_;
-   $self->{cur}->focus_in;
-   ();
-}
-
-sub on_focus_out {
-   my ($self, $event) = @_;
-   $self->{cur}->focus_out;
-   ();
-}
-
-sub on_key_press {
-   my ($self, $event) = @_;
-   $self->{cur}->key_press ($event->{state}, $event->{keycode}, $event->{time});
-   1;
-}
-
-sub on_key_release {
-   my ($self, $event) = @_;
-   $self->{cur}->key_release ($event->{state}, $event->{keycode}, $event->{time});
-   1;
-}
-
-sub on_button_release {
-   my ($self, $event) = @_;
-
-   if ($event->{row} == 0) {
-      my $col = $event->{col};
-      for my $button (@{ $self->{tabofs} }) {
-         last if     $col <  $button->[0];
-         next unless $col <= $button->[1];
-         if ($button->[2] == -1) {
-            $self->new_tab;
-         } else {
-            $self->make_current($self->{tabs}[$button->[2]]);
-         }
-      }
-      return 1;
-   }
-
-   ();
-}
-
-sub on_init {
-   my ($self) = @_;
-
-   $self->{resource} = [map $self->resource ("+$_"), 0 .. urxvt::NUM_RESOURCES - 1];
-
-   $self->resource (int_bwidth => 0);
-   $self->resource (pty_fd => -1);
-
-   $self->{option} = {};
-   for my $key (keys %urxvt::OPTION) {
-       $self->{option}{$key} = $self->option($urxvt::OPTION{$key});
-   }
-
-   # this is for the tabs terminal; order is important
-   $self->option ($urxvt::OPTION{scrollBar}, 0);
-
-   my $fg    = $self->my_resource ("tabbar-fg");
-   my $bg    = $self->my_resource ("tabbar-bg");
-   my $tabfg = $self->my_resource ("tab-fg");
-   my $tabbg = $self->my_resource ("tab-bg");
-   my $titfg = $self->my_resource ("title-fg");
-   my $titbg = $self->my_resource ("title-bg");
-
-   defined $fg    or $fg    = 3;
-   defined $bg    or $bg    = 0;
-   defined $tabfg or $tabfg = 0;
-   defined $tabbg or $tabbg = 1;
-   defined $titfg or $titfg = 15;
-   defined $titbg or $titbg = 8;
-
-   $self->{rs_tabbar} = urxvt::SET_COLOR (urxvt::DEFAULT_RSTYLE, $fg    + 2, $bg    + 2);
-   $self->{rs_tab}    = urxvt::SET_COLOR (urxvt::DEFAULT_RSTYLE, $tabfg + 2, $tabbg + 2);
-   $self->{rs_title}  = urxvt::SET_COLOR (urxvt::DEFAULT_RSTYLE, $titfg + 2, $titbg + 2);
-
-
-   my $timeouts = $self->my_resource ("tabbar-timeouts");
-   $timeouts = '16:.:8:::4:+' unless defined $timeouts;
-   if ($timeouts ne '') {
-      my @timeouts;
-      while ($timeouts =~ /^(\d+):(.)(?::(.*))?$/) {
-         push @timeouts, [ int $1, $2 ];
-         $timeouts = defined $3 ? $3 : '';
-      }
-      if (@timeouts) {
-         $self->{timeouts} = [ sort { $b->[0] <=> $a-> [0] } @timeouts ];
-      }
-   }
-
-   $self->{new_button} =
-      ($self->my_resource ('new-button') or 'false') !~ /^(?:false|0|no)/i;
-   $self->{tab_title} =
-      ($self->my_resource ('title') or 'true') !~ /^(?:false|0|no)/i;
-   $self->{autohide} =
-      ($self->my_resource ('autohide') or 'false') !~ /^(?:false|0|no)/i;
-   $self->{no_default_keys} =
-      ($self->my_resource ('no-tabbedex-keys') or 'false') !~ /^(?:false|0|no)/i;
-    $self->{reopen_on_close} =
-      ($self->my_resource ('reopen-on-close') or 'false') !~ /^(?:false|0|no)/i;
-
-   ();
-}
-
-
-sub on_start {
-   my ($self) = @_;
-
-   $self->{maxtabheight} = $self->int_bwidth + $self->fheight + $self->lineSpace;
-   $self->{tabheight} = $self->{autohide} ? 0 : $self->{maxtabheight};
-
-   $self->{running_user_command} = 0;
-
-   $self->cmd_parse ("\033[?25l");
-
-   my @argv = $self->argv;
-
-   do {
-      shift @argv;
-   } while @argv && $argv[0] ne "-e";
-
-   if ($self->{tab_title}) {
-      $self->{tab_title} = $self->{term}->XInternAtom("_NET_WM_NAME", 1);
-   }
-
-   $self->new_tab (@argv);
-
-   if (defined $self->{timeouts}) {
-      my $interval = ($self->{timeouts}[@{ $self->{timeouts} } - 1]->[0]);
-      $interval = int($interval / 4);
-      $self->{timer} = urxvt::timer->new
-                                   ->interval($interval < 1 ? 1 : $interval)
-                                   ->cb ( sub { $self->refresh; } );
-   }
-
-   ();
-}
-
-
-sub on_configure_notify {
-   my ($self, $event) = @_;
-
-   $self->configure;
-   $self->refresh;
-
-   ();
-}
-
-
-sub on_user_command {
-  my ($self, $event) = @_;
-
-  $self->{cur}->{term}->{parent}->tab_user_command($self->{cur}, $event, 1);
-
-  ();
-}
-
-
-sub on_wm_delete_window {
-   my ($self) = @_;
-   $_->destroy for @{ $self->{tabs} };
-   1;
-}
-
-
-sub tab_start {
-   my ($self, $tab) = @_;
-
-   $tab->XChangeInput ($tab->parent, urxvt::PropertyChangeMask);
-
-   push @{ $self->{tabs} }, $tab;
-
-#   $tab->{name} ||= scalar @{ $self->{tabs} };
-   $self->make_current ($tab);
-
-   ();
-}
-
-
-sub tab_destroy {
-   my ($self, $tab) = @_;
-
-   if ($self->{reopen_on_close} && $#{ $self->{tabs} } == 0) {
-      $self->new_tab;
-      $self->make_current ($self->{tabs}[-1]);
-   }
-
-   $self->{tabs} = [ grep $_ != $tab, @{ $self->{tabs} } ];
-   $self->update_autohide ();
-
-   if (@{ $self->{tabs} }) {
-      if ($self->{cur} == $tab) {
-         delete $self->{cur};
-         $self->make_current ($self->{tabs}[-1]);
-      } else {
-         $self->refresh;
-      }
-   } else {
-      # delay destruction a tiny bit
-      $self->{destroy} = urxvt::iw->new->start->cb (sub { $self->destroy });
-   }
-
-   ();
-}
-
-
-sub tab_key_press {
-   my ($self, $tab, $event, $keysym, $str) = @_;
-
-   # setting binding keys
-   #open FILE, ">/tmp/key.txt" or die $!;
-   #printf FILE $keysym;
-   #close FILE;
-
-   if ($tab->{is_inputting_name}) {
-      if ($keysym == 0xff0d || $keysym == 0xff8d) { # enter
-         $tab->{name} = $tab->{new_name};
-         $tab->{is_inputting_name} = 0;
-         $self->update_autohide (1);
-      } elsif ($keysym == 0xff1b) { # escape
-         $tab->{name} = $tab->{old_name};
-         $tab->{is_inputting_name} = 0;
-         $self->update_autohide (1);
-      } elsif ($keysym == 0xff08) { # backspace
-         substr $tab->{new_name}, -1, 1, "";
-         $tab->{name} = "$tab->{new_name}█";
-      } elsif ($str !~ /[\x00-\x1f\x80-\xaf]/) {
-         $tab->{new_name} .= $str;
-         $tab->{name} = "$tab->{new_name}█";
-      }
-      $self->refresh;
-      return 1;
-   }
-
-   return () if ($self->{no_default_keys});
-
-   if ($event->{state} & urxvt::ControlMask) {
-      if ($keysym == 0x004a || $keysym == 0x006a) {
-         if (@{ $self->{tabs} } > 1) {
-            $self->change_tab($tab, -1);
-         }
-         return 1;
-
-      } elsif ($keysym == 0x004b || $keysym == 0x006b) {
-         if (@{ $self->{tabs} } > 1) {
-            $self->change_tab($tab, 1);
-         }
-         return 1;
-      } elsif ($keysym == 0x003b) {
-         $self->new_tab;
-         return 1;
-
-      } elsif ($keysym == 0xff52) {
-         $self->rename_tab($tab);
-         return 1;
-      } elsif ($keysym == 0x0047 || $keysym == 0x0067) {
-         $self->move_tab($tab, 1);
-         return 1;
-      } elsif ($keysym == 0x0048 || $keysym == 0x0068) {
-         $self->move_tab($tab, -1);
-         return 1;
-      } elsif ($keysym == 0x0044) {
-         $tab->destroy;
-         return 1;
-      } elsif ($keysym == 0x0054 || $keysym == 0x0074) {
-         $tab->{is_inputting_name} = 1;
-         $tab->{old_name} = $tab->{name} ? $tab->{name} : "";
-         $tab->{new_name} = "";
-         $tab->{name} = "█";
-         $self->update_autohide (1);
-         $self->refresh;
-         return 1;
-      }
-
-
-   }
-
-   ();
-}
-
-
-sub tab_property_notify {
-   my ($self, $tab, $event) = @_;
-
-   $self->copy_properties
-      if $event->{window} == $tab->parent;
-
-   ();
-}
-
-
-sub tab_add_lines {
-   my ($self, $tab) = @_;
-   my $mark = $self->tab_activity_mark($tab);
-   $tab->{lastActivity} = int urxvt::NOW;
-   $self->refresh if $mark ne $self->tab_activity_mark($tab);
-   ();
-}
-
-
-sub tab_user_command {
-  my ($self, $tab, $cmd, $proxy_events) = @_;
-
-  if ($cmd eq 'tabbedex:new_tab') {
-    $self->new_tab;
-  }
-  elsif ($cmd eq 'tabbedex:next_tab') {
-    $self->change_tab($tab, 1);
-  }
-  elsif ($cmd eq 'tabbedex:prev_tab') {
-    $self->change_tab($tab, -1);
-  }
-  elsif ($cmd eq 'tabbedex:move_tab_left') {
-    $self->move_tab($tab, -1);
-  }
-  elsif ($cmd eq 'tabbedex:move_tab_right') {
-    $self->move_tab($tab, 1);
-  }
-  elsif ($cmd eq 'tabbedex:rename_tab') {
-    $self->rename_tab($tab);
-  }
-  else {
-    # Proxy the user command through to the tab's term, while taking care not
-    # to get caught in an infinite loop.
-    if ($proxy_events && $self->{running_user_command} == 0) {
-      $self->{running_user_command} = 1;
-      urxvt::invoke($tab->{term}, 20, $cmd);
-      $self->{running_user_command} = 0;
-    }
-  }
-
-  ();
-}
-
-sub change_tab {
-  my ($self, $tab, $direction) = @_;
-
-  my $idx = 0;
-  ++$idx while $self->{tabs}[$idx] != $tab;
-  $idx += $direction;
-  $self->make_current ($self->{tabs}[$idx % @{ $self->{tabs}}]);
-
-  ();
-}
-
-sub move_tab {
-  my ($self, $tab, $direction) = @_;
-
-  if (@{ $self->{tabs} } > 1) {
-    my $idx1 = 0;
-    ++$idx1 while $self->{tabs}[$idx1] != $tab;
-    my $idx2 = ($idx1 + $direction) % @{ $self->{tabs} };
-
-    ($self->{tabs}[$idx1], $self->{tabs}[$idx2]) =
-      ($self->{tabs}[$idx2], $self->{tabs}[$idx1]);
-    $self->make_current ($self->{tabs}[$idx2]);
-  }
-
-  ();
-}
-
-sub rename_tab {
-  my ($self, $tab) = @_;
-
-  $tab->{is_inputting_name} = 1;
-  $tab->{old_name} = $tab->{name} ? $tab->{name} : "";
-  $tab->{new_name} = "";
-  $tab->{name} = "█";
-  $self->update_autohide (1);
-  $self->refresh;
-
-  ();
-}
-
-package urxvt::ext::tabbedex::tab;
-
-# helper extension implementing the subwindows of a tabbed terminal.
-# simply proxies all interesting calls back to the tabbedex class.
-
-{
-   for my $hook (qw(start destroy user_command key_press property_notify add_lines)) {
-      eval qq{
-         sub on_$hook {
-            my \$parent = \$_[0]{term}{parent}
-               or return;
-            \$parent->tab_$hook (\@_)
-         }
-      };
-      die if $@;
-   }
-}

.vim/autoload/pathogen.vim

@@ -1,326 +0,0 @@
-" pathogen.vim - path option manipulation
-" Maintainer:   Tim Pope <http://tpo.pe/>
-" Version:      2.2
-
-" Install in ~/.vim/autoload (or ~\vimfiles\autoload).
-"
-" For management of individually installed plugins in ~/.vim/bundle (or
-" ~\vimfiles\bundle), adding `call pathogen#infect()` to the top of your
-" .vimrc is the only other setup necessary.
-"
-" The API is documented inline below.  For maximum ease of reading,
-" :set foldmethod=marker
-
-if exists("g:loaded_pathogen") || &cp
-  finish
-endif
-let g:loaded_pathogen = 1
-
-function! s:warn(msg)
-  echohl WarningMsg
-  echomsg a:msg
-  echohl NONE
-endfunction
-
-" Point of entry for basic default usage.  Give a relative path to invoke
-" pathogen#incubate() (defaults to "bundle/{}"), or an absolute path to invoke
-" pathogen#surround().  For backwards compatibility purposes, a full path that
-" does not end in {} or * is given to pathogen#runtime_prepend_subdirectories()
-" instead.
-function! pathogen#infect(...) abort " {{{1
-  for path in a:0 ? reverse(copy(a:000)) : ['bundle/{}']
-    if path =~# '^[^\\/]\+$'
-      call s:warn('Change pathogen#infect('.string(path).') to pathogen#infect('.string(path.'/{}').')')
-      call pathogen#incubate(path . '/{}')
-    elseif path =~# '^[^\\/]\+[\\/]\%({}\|\*\)$'
-      call pathogen#incubate(path)
-    elseif path =~# '[\\/]\%({}\|\*\)$'
-      call pathogen#surround(path)
-    else
-      call s:warn('Change pathogen#infect('.string(path).') to pathogen#infect('.string(path.'/{}').')')
-      call pathogen#surround(path . '/{}')
-    endif
-  endfor
-  call pathogen#cycle_filetype()
-  return ''
-endfunction " }}}1
-
-" Split a path into a list.
-function! pathogen#split(path) abort " {{{1
-  if type(a:path) == type([]) | return a:path | endif
-  let split = split(a:path,'\\\@<!\%(\\\\\)*\zs,')
-  return map(split,'substitute(v:val,''\\\([\\,]\)'',''\1'',"g")')
-endfunction " }}}1
-
-" Convert a list to a path.
-function! pathogen#join(...) abort " {{{1
-  if type(a:1) == type(1) && a:1
-    let i = 1
-    let space = ' '
-  else
-    let i = 0
-    let space = ''
-  endif
-  let path = ""
-  while i < a:0
-    if type(a:000[i]) == type([])
-      let list = a:000[i]
-      let j = 0
-      while j < len(list)
-        let escaped = substitute(list[j],'[,'.space.']\|\\[\,'.space.']\@=','\\&','g')
-        let path .= ',' . escaped
-        let j += 1
-      endwhile
-    else
-      let path .= "," . a:000[i]
-    endif
-    let i += 1
-  endwhile
-  return substitute(path,'^,','','')
-endfunction " }}}1
-
-" Convert a list to a path with escaped spaces for 'path', 'tag', etc.
-function! pathogen#legacyjoin(...) abort " {{{1
-  return call('pathogen#join',[1] + a:000)
-endfunction " }}}1
-
-" Remove duplicates from a list.
-function! pathogen#uniq(list) abort " {{{1
-  let i = 0
-  let seen = {}
-  while i < len(a:list)
-    if (a:list[i] ==# '' && exists('empty')) || has_key(seen,a:list[i])
-      call remove(a:list,i)
-    elseif a:list[i] ==# ''
-      let i += 1
-      let empty = 1
-    else
-      let seen[a:list[i]] = 1
-      let i += 1
-    endif
-  endwhile
-  return a:list
-endfunction " }}}1
-
-" \ on Windows unless shellslash is set, / everywhere else.
-function! pathogen#separator() abort " {{{1
-  return !exists("+shellslash") || &shellslash ? '/' : '\'
-endfunction " }}}1
-
-" Convenience wrapper around glob() which returns a list.
-function! pathogen#glob(pattern) abort " {{{1
-  let files = split(glob(a:pattern),"\n")
-  return map(files,'substitute(v:val,"[".pathogen#separator()."/]$","","")')
-endfunction "}}}1
-
-" Like pathogen#glob(), only limit the results to directories.
-function! pathogen#glob_directories(pattern) abort " {{{1
-  return filter(pathogen#glob(a:pattern),'isdirectory(v:val)')
-endfunction "}}}1
-
-" Turn filetype detection off and back on again if it was already enabled.
-function! pathogen#cycle_filetype() " {{{1
-  if exists('g:did_load_filetypes')
-    filetype off
-    filetype on
-  endif
-endfunction " }}}1
-
-" Check if a bundle is disabled.  A bundle is considered disabled if it ends
-" in a tilde or its basename or full name is included in the list
-" g:pathogen_disabled.
-function! pathogen#is_disabled(path) " {{{1
-  if a:path =~# '\~$'
-    return 1
-  elseif !exists("g:pathogen_disabled")
-    return 0
-  endif
-  let sep = pathogen#separator()
-  let blacklist = g:pathogen_disabled
-  return index(blacklist, strpart(a:path, strridx(a:path, sep)+1)) != -1 && index(blacklist, a:path) != 1
-endfunction "}}}1
-
-" Prepend the given directory to the runtime path and append its corresponding
-" after directory.  If the directory is already included, move it to the
-" outermost position.  Wildcards are added as is.  Ending a path in /{} causes
-" all subdirectories to be added (except those in g:pathogen_disabled).
-function! pathogen#surround(path) abort " {{{1
-  let sep = pathogen#separator()
-  let rtp = pathogen#split(&rtp)
-  if a:path =~# '[\\/]{}$'
-    let path = fnamemodify(a:path[0:-4], ':p:s?[\\/]\=$??')
-    let before = filter(pathogen#glob_directories(path.sep.'*'), '!pathogen#is_disabled(v:val)')
-    let after  = filter(reverse(pathogen#glob_directories(path.sep."*".sep."after")), '!pathogen#is_disabled(v:val[0:-7])')
-    call filter(rtp,'v:val[0:strlen(path)-1] !=# path')
-  else
-    let path = fnamemodify(a:path, ':p:s?[\\/]\=$??')
-    let before = [path]
-    let after = [path . sep . 'after']
-    call filter(rtp, 'index(before + after, v:val) == -1')
-  endif
-  let &rtp = pathogen#join(before, rtp, after)
-  return &rtp
-endfunction " }}}1
-
-" Prepend all subdirectories of path to the rtp, and append all 'after'
-" directories in those subdirectories.  Deprecated.
-function! pathogen#runtime_prepend_subdirectories(path) " {{{1
-  call s:warn('Change pathogen#runtime_prepend_subdirectories('.string(a:path).') to pathogen#surround('.string(a:path.'/{}').')')
-  return pathogen#surround(a:path . pathogen#separator() . '{}')
-endfunction " }}}1
-
-" For each directory in the runtime path, add a second entry with the given
-" argument appended.  If the argument ends in '/{}', add a separate entry for
-" each subdirectory.  The default argument is 'bundle/{}', which means that
-" .vim/bundle/*, $VIM/vimfiles/bundle/*, $VIMRUNTIME/bundle/*,
-" $VIM/vim/files/bundle/*/after, and .vim/bundle/*/after will be added (on
-" UNIX).
-function! pathogen#incubate(...) abort " {{{1
-  let sep = pathogen#separator()
-  let name = a:0 ? a:1 : 'bundle/{}'
-  if "\n".s:done_bundles =~# "\\M\n".name."\n"
-    return ""
-  endif
-  let s:done_bundles .= name . "\n"
-  let list = []
-  for dir in pathogen#split(&rtp)
-    if dir =~# '\<after$'
-      if name =~# '{}$'
-        let list +=  filter(pathogen#glob_directories(substitute(dir,'after$',name[0:-3],'').'*'.sep.'after'), '!pathogen#is_disabled(v:val[0:-7])') + [dir]
-      else
-        let list += [dir, substitute(dir, 'after$', '', '') . name . sep . 'after']
-      endif
-    else
-      if name =~# '{}$'
-        let list +=  [dir] + filter(pathogen#glob_directories(dir.sep.name[0:-3].'*'), '!pathogen#is_disabled(v:val)')
-      else
-        let list += [dir . sep . name, dir]
-      endif
-    endif
-  endfor
-  let &rtp = pathogen#join(pathogen#uniq(list))
-  return 1
-endfunction " }}}1
-
-" Deprecated alias for pathogen#incubate().
-function! pathogen#runtime_append_all_bundles(...) abort " {{{1
-  if a:0
-    call s:warn('Change pathogen#runtime_append_all_bundles('.string(a:1).') to pathogen#incubate('.string(a:1.'/{}').')')
-  else
-    call s:warn('Change pathogen#runtime_append_all_bundles() to pathogen#incubate()')
-  endif
-  return call('pathogen#incubate', map(copy(a:000),'v:val . "/{}"'))
-endfunction
-
-let s:done_bundles = ''
-" }}}1
-
-" Invoke :helptags on all non-$VIM doc directories in runtimepath.
-function! pathogen#helptags() abort " {{{1
-  let sep = pathogen#separator()
-  for glob in pathogen#split(&rtp)
-    for dir in split(glob(glob), "\n")
-      if (dir.sep)[0 : strlen($VIMRUNTIME)] !=# $VIMRUNTIME.sep && filewritable(dir.sep.'doc') == 2 && !empty(filter(split(glob(dir.sep.'doc'.sep.'*'),"\n>"),'!isdirectory(v:val)')) && (!filereadable(dir.sep.'doc'.sep.'tags') || filewritable(dir.sep.'doc'.sep.'tags'))
-        silent! execute 'helptags' pathogen#fnameescape(dir.'/doc')
-      endif
-    endfor
-  endfor
-endfunction " }}}1
-
-command! -bar Helptags :call pathogen#helptags()
-
-" Execute the given command.  This is basically a backdoor for --remote-expr.
-function! pathogen#execute(...) abort " {{{1
-  for command in a:000
-    execute command
-  endfor
-  return ''
-endfunction " }}}1
-
-" Like findfile(), but hardcoded to use the runtimepath.
-function! pathogen#runtime_findfile(file,count) abort "{{{1
-  let rtp = pathogen#join(1,pathogen#split(&rtp))
-  let file = findfile(a:file,rtp,a:count)
-  if file ==# ''
-    return ''
-  else
-    return fnamemodify(file,':p')
-  endif
-endfunction " }}}1
-
-" Backport of fnameescape().
-function! pathogen#fnameescape(string) abort " {{{1
-  if exists('*fnameescape')
-    return fnameescape(a:string)
-  elseif a:string ==# '-'
-    return '\-'
-  else
-    return substitute(escape(a:string," \t\n*?[{`$\\%#'\"|!<"),'^[+>]','\\&','')
-  endif
-endfunction " }}}1
-
-if exists(':Vedit')
-  finish
-endif
-
-let s:vopen_warning = 0
-
-function! s:find(count,cmd,file,lcd) " {{{1
-  let rtp = pathogen#join(1,pathogen#split(&runtimepath))
-  let file = pathogen#runtime_findfile(a:file,a:count)
-  if file ==# ''
-    return "echoerr 'E345: Can''t find file \"".a:file."\" in runtimepath'"
-  endif
-  if !s:vopen_warning
-    let s:vopen_warning = 1
-    let warning = '|echohl WarningMsg|echo "Install scriptease.vim to continue using :V'.a:cmd.'"|echohl NONE'
-  else
-    let warning = ''
-  endif
-  if a:lcd
-    let path = file[0:-strlen(a:file)-2]
-    execute 'lcd `=path`'
-    return a:cmd.' '.pathogen#fnameescape(a:file) . warning
-  else
-    return a:cmd.' '.pathogen#fnameescape(file) . warning
-  endif
-endfunction " }}}1
-
-function! s:Findcomplete(A,L,P) " {{{1
-  let sep = pathogen#separator()
-  let cheats = {
-        \'a': 'autoload',
-        \'d': 'doc',
-        \'f': 'ftplugin',
-        \'i': 'indent',
-        \'p': 'plugin',
-        \'s': 'syntax'}
-  if a:A =~# '^\w[\\/]' && has_key(cheats,a:A[0])
-    let request = cheats[a:A[0]].a:A[1:-1]
-  else
-    let request = a:A
-  endif
-  let pattern = substitute(request,'/\|\'.sep,'*'.sep,'g').'*'
-  let found = {}
-  for path in pathogen#split(&runtimepath)
-    let path = expand(path, ':p')
-    let matches = split(glob(path.sep.pattern),"\n")
-    call map(matches,'isdirectory(v:val) ? v:val.sep : v:val')
-    call map(matches,'expand(v:val, ":p")[strlen(path)+1:-1]')
-    for match in matches
-      let found[match] = 1
-    endfor
-  endfor
-  return sort(keys(found))
-endfunction " }}}1
-
-command! -bar -bang -range=1 -nargs=1 -complete=customlist,s:Findcomplete Ve       :execute s:find(<count>,'edit<bang>',<q-args>,0)
-command! -bar -bang -range=1 -nargs=1 -complete=customlist,s:Findcomplete Vedit    :execute s:find(<count>,'edit<bang>',<q-args>,0)
-command! -bar -bang -range=1 -nargs=1 -complete=customlist,s:Findcomplete Vopen    :execute s:find(<count>,'edit<bang>',<q-args>,1)
-command! -bar -bang -range=1 -nargs=1 -complete=customlist,s:Findcomplete Vsplit   :execute s:find(<count>,'split',<q-args>,<bang>1)
-command! -bar -bang -range=1 -nargs=1 -complete=customlist,s:Findcomplete Vvsplit  :execute s:find(<count>,'vsplit',<q-args>,<bang>1)
-command! -bar -bang -range=1 -nargs=1 -complete=customlist,s:Findcomplete Vtabedit :execute s:find(<count>,'tabedit',<q-args>,<bang>1)
-command! -bar -bang -range=1 -nargs=1 -complete=customlist,s:Findcomplete Vpedit   :execute s:find(<count>,'pedit',<q-args>,<bang>1)
-command! -bar -bang -range=1 -nargs=1 -complete=customlist,s:Findcomplete Vread    :execute s:find(<count>,'read',<q-args>,<bang>1)
-
-" vim:set et sw=2:

.vim/plugin/AutoFenc.vim

@@ -1,698 +0,0 @@
-" File:        AutoFenc.vim
-" Brief:       Tries to automatically detect file encoding
-" Author:      Petr Zemek, s3rvac AT gmail DOT com
-" Version:     1.5
-" Last Change: Sat Mar 17 11:39:56 CET 2012
-"
-" License:
-"   Copyright (C) 2009-2012 Petr Zemek
-"   This program is free software; you can redistribute it and/or modify it
-"   under the terms of the GNU General Public License as published by the Free
-"   Software Foundation; either version 2 of the License, or (at your option)
-"   any later version.
-"
-"   This program is distributed in the hope that it will be useful, but
-"   WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
-"   or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
-"   for more details.
-"
-"   You should have received a copy of the GNU General Public License along
-"   with this program; if not, write to the Free Software Foundation, Inc.,
-"   59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
-"
-" Description:
-"   This script tries to automatically detect and set file encoding when
-"   opening a file in Vim. It does this in several possible ways (according
-"   to the configuration) in this order (when a method fails, it tries
-"   the following one):
-"     (1) detection of BOM (byte-order-mark) at the beginning of the file,
-"         only for some multibyte encodings
-"     (2) HTML way of encoding detection (via <meta> tag), only for HTML based
-"         file types
-"     (3) XML way of encoding detection (via <?xml ... ?> declaration), only
-"         for XML based file types
-"     (4) CSS way of encoding detection (via @charset 'at-rule'), only for
-"         CSS files
-"     (5) checks whether the encoding is specified in a comment (like
-"         '# Encoding: latin2'), for all file types
-"     (6) tries to detect the encoding via specified external program
-"         (the default one is enca), for all file types
-"
-"   If the autodetection fails, it's up to Vim (and your configuration)
-"   to set the encoding.
-"
-"   Configuration options for this plugin (you can set them in your $HOME/.vimrc):
-"    - g:autofenc_enable (0 or 1, default 1)
-"        Enables/disables this plugin.
-"    - g:autofenc_emit_messages (0 or 1, default 0)
-"        Emits messages about the detected/used encoding upon opening a file.
-"    - g:autofenc_max_file_size (number >= 0, default 10485760)
-"        If the size of a file is higher than this value (in bytes), then
-"        the autodetection will not be performed.
-"    - g:autofenc_disable_for_files_matching (regular expression, see below)
-"        If the file (with complete path) matches this regular expression,
-"        then the autodetection will not be performed. It is by default set
-"        to disable autodetection for non-local files (e.g. accessed via ftp,
-"        scp etc., because the script can't handle some kind of autodetection
-"        for these files). The regular expression is matched case-sensitively.
-"    - g:autofenc_disable_for_file_types (list of strings, default [])
-"        If the file type matches some of the filetypes specified in this list,
-"        then the autodetection will not be performed. Comparison is done
-"        case-sensitively.
-"    - g:autofenc_autodetect_bom (0 or 1, default 0 if 'ucs-bom' is in
-"                                 'fileencodings', 1 otherwise)
-"        Enables/disables detection of encoding by BOM.
-"    - g:autofenc_autodetect_html (0 or 1, default 1)
-"        Enables/disables detection of encoding for HTML based documents.
-"    - g:autofenc_autodetect_html_filetypes (regular expression, see below)
-"        Regular expression for all supported HTML file types.
-"    - g:autofenc_autodetect_xml (0 or 1, default 1)
-"        Enables/disables detection of encoding for XML based documents.
-"    - g:autofenc_autodetect_xml_filetypes (regular expression, see below)
-"        Regular expression for all supported XML file types.
-"    - g:autofenc_autodetect_css (0 or 1, default 1)
-"        Enables/disables detection of encoding for CSS documents.
-"    - g:autofenc_autodetect_css_filetypes (regular expression, see below)
-"        Regular expression for all supported CSS file types.
-"    - g:autofenc_autodetect_comment (0 or 1, default 1)
-"        Enables/disables detection of encoding in comments.
-"    - g:autofenc_autodetect_commentexpr (regular expression, see below)
-"        Pattern for detection of encodings specified in a comment.
-"    - g:autofenc_autodetect_num_of_lines (number >= 0, default 5)
-"        How many lines from the beginning and from the end of the file should
-"        be searched for the possible encoding declaration.
-"    - g:autofenc_autodetect_ext_prog (0 or 1, default 1)
-"        Enables/disables detection of encoding via external program
-"        (see additional settings below).
-"    - g:autofenc_ext_prog_path (string, default 'enca')
-"        Path to the external program. It can be either relative or absolute.
-"        The external program can take any number of arguments, but
-"        the last one must be a path to the file for which the encoding
-"        is to be detected (it will be supplied by this plugin).
-"        Output of the program must be the name of encoding in which the file
-"        is saved (string on a single line).
-"    - g:autofenc_ext_prog_args (string, default '-i -L czech')
-"        Additional program arguments (can be none, i.e. '').
-"    - g:autofenc_ext_prog_unknown_fenc (string, default '???')
-"        If the output of the external program is this string, then it means
-"        that the file encoding was not detected successfully. The string must
-"        be case-sensitive.
-"    - g:autofenc_enc_blacklist (regular expression, default '')
-"        If the detected encoding matches this regular expression, it is
-"        ignored.
-"
-" Requirements:
-"   - filetype plugin must be enabled (a line like 'filetype plugin on' must
-"     be in your $HOME/.vimrc [*nix] or %UserProfile%\_vimrc [MS Windows])
-"
-" Installation Details:
-"   Put this file into your $HOME/.vim/plugin directory [*nix]
-"   or %UserProfile%\vimfiles\plugin folder [MS Windows].
-"
-" Notes:
-"  This script is by all means NOT perfect, but it works for me and suits my
-"  needs very well, so it might be also useful for you. Your feedback,
-"  opinion, suggestions, bug reports, patches, simply anything you have
-"  to say is welcomed!
-"
-"  There are similar plugins to this one, so if you don't like this one,
-"  you can test these:
-"    - FencView.vim (http://www.vim.org/scripts/script.php?script_id=1708)
-"        Mainly supports detection of encodings for asian languages.
-"    - MultiEnc.vim (http://www.vim.org/scripts/script.php?script_id=1806)
-"        Obsolete, merged with the previous one.
-"    - charset.vim (http://www.vim.org/scripts/script.php?script_id=199)
-"        Not very complete/correct and last update in 2002.
-"    - http://vim.wikia.com/wiki/Detect_encoding_from_the_charset_specified_in_HTML_files
-"        Same basic ideas but only for HTML files.
-"  Let me know if there are others and I'll add them here.
-"
-" Changelog:
-"   1.5 (2012-03-17) Thanks to Ingo Karkat for the updates in this version.
-"     - Supported HTML/XML/CSS file types have been made configurable and added more defaults.
-"     - Do not emit the "unrecognized charset" message when the encoding is known.
-"
-"   1.4 (2012-03-11) Thanks to Ingo Karkat for the updates in this version.
-"     - Improved the detection regexp for comments:
-"         - added "fileencoding" and "charset";
-"         - demands that there is a whitespace in front of the keyword, so that
-"           "daycoding" doesn't match;
-"         - g:autofenc_autodetect_commentexpr allows to configure the pattern
-"           for comment detection.
-"     - Introduced g:autofenc_enc_blacklist to disable some encodings. For
-"       example, the enca tool has a tendency to detect plain text files as
-"       UTF-7. With the blacklist, AutoFenc can be instructed to ignore those
-"       encodings.
-"     - The check for ASCII is set to be case-insensitive because enca reports
-"       this in uppercase, so the condition fails unless ignorecase is set.
-"     - Keeps changed CWD with 'autochdir' setting by temporarily disabling it.
-"       For example, suppose that a user has ":lcd .." in
-"       after/ftplugin/gitcommit.vim and that he is in the Git root directory,
-"       not the .git subdir when composing a commit message. The reload of the
-"       buffer by AutoFenc (via :edit) again triggered the automatic change of
-"       the working dir, and therefore the customization was lost. The
-"       'autochdir' setting needs to be temporarily disabled to avoid that.
-"     - Added a support for plain Vim 7.0 in the shellescape() emulation from
-"       version 1.3.4. Otherwise, there were errors in Vim 7.0.
-"
-"   1.3.4 (2012-02-27)
-"     - Don't override when the user explicitly sets file encoding with ++enc
-"       (thanks to Benjamin Fritz).
-"     - Fixed TOhtml version detection (again) and made sure line continuations
-"       can actually be used (thanks to Benjamin Fritz and Ingo Karkat).
-"     - Disabled the option shellslash on Windows before calling shellescape()
-"       (it may cause problems on Windows, thanks for the tip goes to Benjamin
-"       Fritz).
-"
-"   1.3.3 (2011-11-29) Thanks to Ingo Karkat for the updates in this version.
-"     - Fixed a problem in the TOhtml detection when, for example,
-"       g:loaded_2html_plugin = 'vim7.3_v6'.
-"     - The return code of the call of an external program via
-"       system(ext_prog_cmd) is now checked. This prevents Vim interpreting an
-"       error message as an encoding.
-"     - shellescape() is now used instead of quoting file_path manually.
-"
-"   1.3.2 (2011-11-24) Thanks to Benjamin Fritz for the updates in this version.
-"     - Fixed the detection of the version of the TOhtml plugin.
-"
-"   1.3.1 (2011-07-23) Thanks to Benjamin Fritz for the updates in this version.
-"     - Fixed the plugin behavior when reloading a file with different settings.
-"
-"   1.3 (2011-04-22) Thanks to Benjamin Fritz for the updates in this version.
-"     - Added support for HTML version 5 encoding detection.
-"     - The script now dies gracefully in old Vims.
-"     - 'g:autofenc_autodetect_comment_num_of_lines' renamed to 'g:autofenc_autodetect_num_of_lines'
-"
-"   1.2.1 (2011-04-13)
-"     - Fixed a typo in a variable name (this resulted in an error in some
-"       occasions). Thanks to Charles Lee for pointing this bug out.
-"
-"   1.2 (2011-03-31) Thanks to Benjamin Fritz for the updates in this version.
-"     - TOhtml's IANA name/Vim encoding conversion functions are now used.
-"     - Changed BOM detection so it does not duplicate a check Vim already did by
-"       default (i.e. default to off if ucs-bom is in the 'fileencodings').
-"     - Put autocmds in the AutoFenc augroup for easier handling.
-"     - Made autocmd nested so we don't need to worry about restoring everything
-"       that other autocmds may set (e.g. syntax).
-"     - Jumplist or cursor position during detection are not affected.
-"     - The g:autofenc_autodetect_num_of_lines option is now used also in
-"       HTML/XML/CSS detection routines (previously only used for encoding
-"       specified in comments).
-"     - Improved HTML charset line regex.
-"     - Added an option (g:autofenc_emit_message) to emit messages about the
-"       detected/used encoding upon opening a file.
-"
-"   1.1.1 (2009-10-03)
-"     - Fixed the comment encoding detection function (the encoding was not
-"       detected if there were some alphanumeric characters before
-"       the "encoding" string, like in "# vim:fileencoding=<encoding-name>").
-"
-"   1.1 (2009-08-16)
-"     - Added three configuration possibilites to disable autodetection for
-"       specific files (based on file size, file type and file path).
-"       See script description for more info.
-"
-"   1.0.2 (2009-08-11)
-"     - Fixed the XML encoding detection function.
-"     - Minor code and documentation fixes.
-"
-"   1.0.1 (2009-08-02)
-"     - Encoding autodetection is now performed only if the opened file
-"       exists (is stored somewhere). So, for example, the autodetection
-"       is now not performed when a new file is opened.
-"     - Correctly works with .viminfo, where the last cursor position
-"       in the file is stored when exiting the file. In the previous version
-"       of this script, this information was sometimes ignored and the cursor
-"       was initially on the very last line in a file. If the user does not
-"       use this .viminfo feature (or he does not use .viminfo at all),
-"       then the cursor will be initially placed on the very first line.
-"     - (Hopefully) fixed the implementation of the function which sets
-"       the detected encoding.
-"
-"   1.0 (2009-07-26)
-"     - Initial release version of this script.
-"
-
-" Check if the plugin was already loaded. Also, die gracefully if the used Vim
-" version is too old.
-if exists('autofenc_loaded') || v:version < 700
-	finish
-endif
-" Make the loaded variable actually useful by including the version number
-let autofenc_loaded = '1.5'
-
-" This plugin uses line continuations
-if &cpo =~ 'C'
-	let s:oldcpo = &cpo
-	set cpo-=C
-endif
-
-"-------------------------------------------------------------------------------
-" Checks whether the selected variable (first parameter) is already set and
-" if not, it sets it to the value of the second parameter.
-"-------------------------------------------------------------------------------
-function s:CheckAndSetVar(var, value)
-	if !exists(a:var)
-		exec 'let ' . a:var . ' = ' . string(a:value)
-	endif
-endfunction
-
-" Variables initialization (see script description for more information)
-call s:CheckAndSetVar('g:autofenc_enable', 1)
-call s:CheckAndSetVar('g:autofenc_emit_messages', 0)
-call s:CheckAndSetVar('g:autofenc_max_file_size', 10485760)
-call s:CheckAndSetVar('g:autofenc_disable_for_files_matching', '^[-_a-zA-Z0-9]\+://')
-call s:CheckAndSetVar('g:autofenc_disable_for_file_types', [])
-call s:CheckAndSetVar('g:autofenc_autodetect_bom', (&fileencodings !~# 'ucs-bom'))
-call s:CheckAndSetVar('g:autofenc_autodetect_html', 1)
-call s:CheckAndSetVar('g:autofenc_autodetect_html_filetypes', '^\(html.*\|xhtml\|aspperl\|aspvbs\|cf\|dtml\|gsp\|jsp\|mason\|php\|plp\|smarty\|spyce\|webmacro\)$')
-call s:CheckAndSetVar('g:autofenc_autodetect_xml', 1)
-call s:CheckAndSetVar('g:autofenc_autodetect_xml_filetypes', '^\(xml\|xquery\|xsd\|xslt\?\|ant\|dsl\|mxml\|svg\|wsh\|xbl\)$')
-call s:CheckAndSetVar('g:autofenc_autodetect_css', 1)
-call s:CheckAndSetVar('g:autofenc_autodetect_css_filetypes', '^\(css\|sass\)$')
-call s:CheckAndSetVar('g:autofenc_autodetect_comment', 1)
-call s:CheckAndSetVar('g:autofenc_autodetect_commentexpr', '\c^\A\(.*\s\)\?\(\(\(file\)\?en\)\?coding\|charset\)[:=]\?\s*\zs[-A-Za-z0-9_]\+')
-call s:CheckAndSetVar('g:autofenc_autodetect_num_of_lines', 5)
-call s:CheckAndSetVar('g:autofenc_autodetect_ext_prog', 1)
-call s:CheckAndSetVar('g:autofenc_ext_prog_path', 'enca')
-call s:CheckAndSetVar('g:autofenc_ext_prog_args', '-i -L czech')
-call s:CheckAndSetVar('g:autofenc_ext_prog_unknown_fenc', '???')
-call s:CheckAndSetVar('g:autofenc_enc_blacklist', '')
-
-"-------------------------------------------------------------------------------
-" Normalizes selected encoding and returns it, so it can be safely used as
-" a new encoding. This function should be called before a new encoding is set.
-"-------------------------------------------------------------------------------
-function s:NormalizeEncoding(enc)
-	let nenc = tolower(a:enc)
-
-	" Recent versions of TOhtml runtime plugin have some nice charset to encoding
-	" functions which even allow user overrides. Use them if available.
-	let nenc2 = ""
-	silent! let nenc2 = tohtml#EncodingFromCharset(nenc)
-	if nenc2 != ""
-		return nenc2
-	" If the TOhtml function is unavailable, at least handle some canonical
-	" encoding names in Vim.
-	elseif nenc =~ 'iso[-_]8859-1'
-		return 'latin1'
-	elseif nenc =~ 'iso[-_]8859-2'
-		return 'latin2'
-	elseif nenc ==? 'gb2312'
-		return 'cp936' " GB2312 imprecisely means CP936 in HTML
-	elseif nenc =~ '\(cp\|win\(dows\)\?\)-125\d'
-		return 'cp125'.nenc[strlen(nenc)-1]
-	elseif nenc == 'utf8'
-		return 'utf-8'
-	elseif g:autofenc_emit_messages && nenc !~ '^\%(8bit-\|2byte-\)\?\%(latin[12]\|utf-8\|utf-16\%(le\)\?\|ucs-[24]\%(le\)\?\|iso-8859-\d\{1,2}\|cp\d\{3,4}\)$'
-		echomsg 'AutoFenc: detected unrecognized charset, trying fenc='.nenc
-	endif
-
-	return nenc
-endfunction
-
-"-------------------------------------------------------------------------------
-" Sets the selected file encoding. Returns 1 if the file was reloaded,
-" 0 otherwise.
-"-------------------------------------------------------------------------------
-function s:SetFileEncoding(enc)
-	let nenc = s:NormalizeEncoding(a:enc)
-
-	" Check whether we're not trying to set the current file encoding
-	if nenc != "" && nenc !=? &fenc
-		if exists('&autochdir') && &autochdir
-			" Other autocmds may have changed the window's working directory;
-			" when 'autochdir' is set, the :edit will reset that, so temporarily
-			" disable the setting.
-			let old_autochdir = &autochdir
-			set noautochdir
-		endif
-		try
-			" Set the file encoding and reload it, keeping any user-specified
-			" fileformat, and keeping any bad bytes in case the header is wrong
-			" (this won't let the user save if a conversion error happened on
-			" read)
-			exec 'edit ++enc='.nenc.' ++ff='.&ff.' ++bad=keep'
-		finally
-			if exists('old_autochdir')
-				let &autochdir = old_autochdir
-			endif
-		endtry
-
-		" File was reloaded
-		return 1
-	else
-		" File was not reloaded
-		return 0
-	endif
-endfunction
-
-"-------------------------------------------------------------------------------
-" Tries to detect a BOM (byte order mark) at the beginning of the file to
-" detect a multibyte encoding. If there is a BOM, it returns the appropriate
-" encoding, otherwise the empty string is returned.
-"-------------------------------------------------------------------------------
-function s:BOMEncodingDetection()
-	" Implementation of this function is based on a part of the FencsView.vim
-	" plugin by Ming Bai (http://www.vim.org/scripts/script.php?script_id=1708)
-
-	" Get the first line of the file
-	let file_content = readfile(expand('%:p'), 'b', 1)
-	if file_content == []
-		" Empty file
-		return ''
-	endif
-	let first_line = file_content[0]
-
-	" Check whether it contains BOM and if so, return appropriate encoding
-	" Note: If the index is out of bounds, ahx is set to '' automatically
-	let ah1 = first_line[0]
-	let ah2 = first_line[1]
-	let ah3 = first_line[2]
-	let ah4 = first_line[3]
-	" TODO: I don't know why but if there is a NUL byte, the char2nr()
-	" function transforms it to a newline (0x0A) instead of 0x00...
-	let a1  = char2nr(ah1) == 0x0A ? 0x00 : char2nr(ah1)
-	let a2  = char2nr(ah2) == 0x0A ? 0x00 : char2nr(ah2)
-	let a3  = char2nr(ah3) == 0x0A ? 0x00 : char2nr(ah3)
-	let a4  = char2nr(ah4) == 0x0A ? 0x00 : char2nr(ah4)
-	if a1.a2.a3.a4 == 0x00.0x00.0xfe.0xff
-		return 'utf-32'
-	elseif a1.a2.a3.a4 == 0xff.0xfe.0x00.0x00
-		return 'utf-32le'
-	elseif a1.a2.a3 == 0xef.0xbb.0xbf
-		return 'utf-8'
-	elseif a1.a2 == 0xfe.0xff
-		return 'utf-16'
-	elseif a1.a2 == 0xff.0xfe
-		return 'utf-16le'
-	endif
-
-	" There was no legal BOM
-	return ''
-endfunction
-
-"-------------------------------------------------------------------------------
-" Tries the HTML way of encoding detection of the current file and returns the
-" detected encoding (or the empty string, if the encoding was not detected).
-"-------------------------------------------------------------------------------
-function s:HTMLEncodingDetection()
-	" This method is based on the meta tag in the head of the HTML document
-	" (<meta http-equiv="Content-Type" ...)
-
-	" Store the actual position in the file and move to the very first line
-	" in the file
-	let curpos=getpos('.')
-	keepjumps 1
-
-	let enc = ''
-
-	" The following regexp is a modified version of the regexp found here:
-	" http://vim.wikia.com/wiki/Detect_encoding_from_the_charset_specified_in_HTML_files
-	let charset_line = search('\c<meta\_s\+http-equiv=\([''"]\?\)Content-Type\1\_s\+content=\([''"]\)[A-Za-z]\+/[+A-Za-z]\+;\_s*charset=[-A-Za-z0-9_]\+\2', 'nc', g:autofenc_autodetect_num_of_lines)
-	" If charset line was not found, try attributes in reverse order since order is
-	" not actually important.
-	if charset_line == 0
-		let charset_line = search('\c<meta\_s\+content=\([''"]\)[A-Za-z]\+/[+A-Za-z]\+;\_s*charset=[-A-Za-z0-9_]\+\1\_s\+http-equiv=\([''"]\?\)Content-Type\2', 'nc', g:autofenc_autodetect_num_of_lines)
-	endif
-	" Detect in HTML version 5
-	if charset_line == 0
-		let charset_line = search('\c<meta\_s\+charset=\([''"]\)[-A-Za-z0-9_]\+\1', 'nc', g:autofenc_autodetect_num_of_lines)
-	endif
-	if charset_line != 0
-		let enc = matchstr(getline(charset_line), 'charset=\([''"]\)\?\zs[-A-Za-z0-9_]\+\ze\1')
-	endif
-
-	" Restore the original position in the file
-
-	call setpos('.', curpos)
-
-	return enc
-endfunction
-
-"-------------------------------------------------------------------------------
-" Tries the XML way of encoding detection of the current file and returns the
-" detected encoding (or the empty string, if the encoding was not detected).
-"-------------------------------------------------------------------------------
-function s:XMLEncodingDetection()
-	" The first part of this method is based on the first line of XML files
-	" (<?xml version="..." encoding="..."?>)
-
-	" Store the actual position in the file and move to the very first line
-	" in the file
-	let curpos=getpos('.')
-	keepjumps 1
-
-	let enc = ''
-
-	let charset_line = search('\c<?xml\s\+version="[.0-9]\+"\s\+encoding="[-A-Za-z0-9_]\+"', 'nc', g:autofenc_autodetect_num_of_lines)
-	if charset_line != 0
-		let enc = matchstr(getline(charset_line), 'encoding="\zs[-A-Za-z0-9_]\+')
-	endif
-
-	" Restore the original position in the file
-	call setpos('.', curpos)
-
-	" If there was no encoding specified, return utf-8 (the check for BOM
-	" should be done in another function - if the user wish that)
-	return enc != '' ? enc : 'utf-8'
-endfunction
-
-"-------------------------------------------------------------------------------
-" Tries the CSS way of encoding detection of the current file and returns the
-" detected encoding (or the empty string, if the encoding was not detected).
-"-------------------------------------------------------------------------------
-function s:CSSEncodingDetection()
-	" This method is based on the @charset 'at-rule'
-	" (see http://www.w3.org/International/questions/qa-css-charset)
-
-	" Store the actual position in the file and move to the very first line
-	" in the file
-	let curpos=getpos('.')
-	keepjumps 1
-
-	let enc = ''
-
-	" Note: The specs says that this line should be the first line in the file,
-	" but I'm searching every line in the file (some comments could perhaps
-	" precede the @charset in practice). If you don't like it, you are
-	" encouraged to change the code :).
-	let charset_line = search('\c^\s*@charset\s\+"[-A-Za-z0-9_]\+"', 'nc', g:autofenc_autodetect_num_of_lines)
-	if charset_line != 0
-		let enc = matchstr(getline(charset_line), '^\s*@charset\s\+"\zs[-A-Za-z0-9_]\+')
-	endif
-
-	" Restore the original position in the file
-	call setpos('.', curpos)
-
-	return enc
-endfunction
-
-"-------------------------------------------------------------------------------
-" Tries to detect encoding via encoding specified in a comment. The file is
-" searched for a line like '# encoding: utf-8' and the file encoding is
-" returned according to this line. If there is no such line, the empty string
-" is returned.
-"
-" The default format of the comment that specifies encoding is some
-" non-alphabetic characters at the beginning of the line, then 'charset'
-" or '[[file]en]coding' (without quotes, case insensitive), which is followed
-" by optional ':' (and whitespace) and the name of the encoding.
-"-------------------------------------------------------------------------------
-function s:CommentEncodingDetection()
-	" Get first and last X lines from the file (according to the configuration)
-	let num_of_lines = g:autofenc_autodetect_num_of_lines
-	let lines_to_search_enc = readfile(expand('%:p'), '', num_of_lines)
-	let lines_to_search_enc += readfile(expand('%:p'), '', -num_of_lines)
-
-	" Check all of the returned lines
-	for line in lines_to_search_enc
-		let enc = matchstr(line, g:autofenc_autodetect_commentexpr)
-		if enc != ''
-			return enc
-		endif
-	endfor
-
-	return ''
-endfunction
-
-"-------------------------------------------------------------------------------
-" A safe version of shellescape. Use it instead of shellescape().
-"-------------------------------------------------------------------------------
-function s:SafeShellescape(path)
-	try
-		if exists('*shellescape')
-			" On MS Windows, we need to disable the option shellslash before calling
-			" shellescape() because otherwise, it may do stupid things (see, e.g.,
-			" http://vim.1045645.n5.nabble.com/shellescape-doesn-t-work-in-Windows-with-shellslash-set-td1211618.html).
-			if has("win32") || has("win64")
-				let old_ssl = &shellslash
-				set noshellslash
-			endif
-			return shellescape(a:path)
-		else
-			" The shellescape({string}) function only exists since Vim 7.0.111
-			" Try to crudely support plain Vim 7.0, too.
-			return '"'.substitute(a:path, '"', '\\"', 'g').'"'
-		endif
-	finally
-		if exists('old_ssl')
-			let &shellslash = old_ssl
-		endif
-	endtry
-endfunction
-
-"-------------------------------------------------------------------------------
-" Tries to detect the file encoding via selected external program.
-" If the program is not executable or there is some error, it returns
-" the empty string. Otherwise, the detected encoding is returned.
-"-------------------------------------------------------------------------------
-function s:ExtProgEncodingDetection()
-	if executable(g:autofenc_ext_prog_path)
-		" Get full path of the currently edited file
-		let file_path = expand('%:p')
-
-		" Create the complete external program command by appending program
-		" arguments and the current file path to the external program.
-		"
-		let ext_prog_cmd = g:autofenc_ext_prog_path.' '.g:autofenc_ext_prog_args.' '.s:SafeShellescape(file_path)
-
-		" Run it to get the encoding
-		let enc = system(ext_prog_cmd)
-		if v:shell_error != 0
-			" An error occurred
-			return ''
-		endif
-
-		" Remove trailing newline from the output
-		" (system() removes any \r from the result automatically)
-		let enc = substitute(enc, '\n', '', '')
-
-		if enc != g:autofenc_ext_prog_unknown_fenc
-			" Encoding was (probably) detected successfully
-			return enc
-		endif
-	endif
-
-	return ''
-endfunction
-
-"-------------------------------------------------------------------------------
-" Tries to detect encoding of the current file via several ways (according
-" to the configuration) and returns it. If the encoding was not detected
-" successfully, it returns the empty string - this can happen because:
-"  - the file is in unknown encoding
-"  - the file is not stored anywhere (e.g. a new file was opened)
-"  - autodetection is disabled for this file (either the file is too large
-"    or autodetection is disabled for this file, see configuration)
-"-------------------------------------------------------------------------------
-function s:DetectFileEncoding()
-	" Check whether the autodetection should be performed
-	" (see function description for more information)
-	let file_path = expand('%:p')
-	let file_size = getfsize(file_path)
-	if file_path == '' ||
-			\ file_size > g:autofenc_max_file_size || file_size < 0 ||
-			\ file_path =~ g:autofenc_disable_for_files_matching ||
-			\ index(g:autofenc_disable_for_file_types, &ft, 0, 1) != -1
-		return ''
-	endif
-
-	" BOM encoding detection
-	if g:autofenc_autodetect_bom
-		let enc = s:BOMEncodingDetection()
-		if enc != ''
-			return enc
-		endif
-	endif
-
-	" HTML encoding detection
-	if g:autofenc_autodetect_html && &filetype =~? g:autofenc_autodetect_html_filetypes
-		let enc = s:HTMLEncodingDetection()
-		if enc != ''
-			return enc
-		endif
-	endif
-
-	" XML encoding detection
-	if g:autofenc_autodetect_xml && &filetype =~? g:autofenc_autodetect_xml_filetypes
-		let enc = s:XMLEncodingDetection()
-		if enc != ''
-			return enc
-		endif
-	endif
-
-	" CSS encoding detection
-	if g:autofenc_autodetect_css && &filetype =~? g:autofenc_autodetect_css_filetypes
-		let enc = s:CSSEncodingDetection()
-		if enc != ''
-			return enc
-		endif
-	endif
-
-	" Comment encoding detection
-	if g:autofenc_autodetect_comment
-		let enc = s:CommentEncodingDetection()
-		if enc != ''
-			return enc
-		endif
-	endif
-
-	" External program encoding detection
-	if g:autofenc_autodetect_ext_prog
-		let enc = s:ExtProgEncodingDetection()
-		if enc != ''
-			return enc
-		endif
-	endif
-
-	" Encoding was not detected
-	return ''
-endfunction
-
-"-------------------------------------------------------------------------------
-" Main plugin function. Tries to autodetect the correct file encoding
-" and sets the detected one (if any). If the ASCII encoding is detected,
-" it does nothing so allow Vim to set its internal encoding instead.
-"-------------------------------------------------------------------------------
-function s:DetectAndSetFileEncoding()
-	let enc = s:DetectFileEncoding()
-
-	" don't call again on the nested trigger from the edit
-	let b:autofenc_done = enc
-
-	if (enc != '') && (enc !=? 'ascii') &&
-			\ (g:autofenc_enc_blacklist == '' || enc !~? g:autofenc_enc_blacklist)
-		if s:SetFileEncoding(enc)
-			if g:autofenc_emit_messages
-				echomsg "AutoFenc: Detected [".enc."] from file, loaded with fenc=".&fenc
-			endif
-		endif
-	endif
-endfunction
-
-" Set the detected file encoding
-if g:autofenc_enable
-	augroup AutoFenc
-		au!
-		" We need to check that we're not in the middle of a reload due to this
-		" plugin otherwise can recurse forever. But unlet the variable to allow
-		" re-detection on the next read of this buffer if it is just unloaded.
-		au BufRead * nested
-			\ if !exists('b:autofenc_done') |
-			\   if v:cmdarg !~ '++enc' |
-			\     call s:DetectAndSetFileEncoding() |
-			\   endif |
-			\ else |
-			\   unlet b:autofenc_done |
-			\ endif
-	augroup END
-endif
-
-" Restore line continuations (and the rest of &cpo) when done
-if exists('s:oldcpo')
-	let &cpo = s:oldcpo
-	unlet s:oldcpo
-endif
-
-" vim: noet

.vimperatorrc

@@ -5,9 +5,3 @@ source! /home/kolan/.vimperatorrc.local
 " vim: set ft=vimperator:
 map <C-S-p> :tabm -1<CR>
 map <C-S-n> :tabm +1<CR>
-
-" Valadoc.org: disable 'new window' in 'edit mode'
-:imap <C-n> <Esc>gt<Esc>
-:imap <C-S-n> <Esc>gt<Esc>
-:imap <C-p> <Esc>gT<Esc>
-:imap <C-S-p> <Esc>gT<Esc>

.vimrc

@@ -6,7 +6,7 @@ set ts=4              " у меня табуляция (tabstop) 4 символ
 set tabstop=4
 set shiftwidth=4
 set textwidth=79
-set tw=159
+set tw=79
 set colorcolumn=80,120,160
 "set expandtab
 set autoindent
@@ -27,7 +27,7 @@ nmap <F6> :set invlist<cr>
 " set breakindent " https://www.linux.org.ru/forum/general/10615635?lastmod=1403800233259
 
 " https://ru.wikibooks.org/wiki/Vim#%D0%A1%D0%BF%D0%BE%D1%81%D0%BE%D0%B1_2
-set langmap=ёйцукенгшщзхъфывапролджэячсмитьбю;`qwertyuiop[]asdfghjkl\\;'zxcvbnm\\,.,ЙЦУКЕНГШЩЗХЪФЫВАПРОЛДЖЭЯЧСМИТЬБЮ;QWERTYUIOP{}ASDFGHJKL:\\"ZXCVBNM<>
+set langmap=ёйцукенгшщзхъфывапролджэячсмитьбю;`qwertyuiop[]asdfghjkl\\;'zxcvbnm\\,.,ЙЦУКЕHГШЩЗХЪФЫВАПРОЛДЖЭЯЧСМИТЬБЮ;QWERTYUIOP{}ASDFGHJKL:\\"ZXCVBNM<>
 
 " Setup for the GNU coding format standard
 function! GnuIndent()
@@ -191,7 +191,7 @@ map <F4> [I:let nr = input("Which one: ")<Bar>exe "normal " . nr ."[\t"<CR>
 
 " Foldging
 set foldenable
-" set foldmethod=syntax
+set foldmethod=syntax
 
 " VUNDLE "
 set nocompatible               " be iMproved
@@ -209,7 +209,7 @@ Bundle 'gmarik/vundle'
 " original repos on github
 Bundle 'tpope/vim-fugitive'
 Bundle 'Lokaltog/vim-easymotion'
-" Bundle 'rstacruz/sparkup', {'rtp': 'vim/'}
+"Bundle 'rstacruz/sparkup', {'rtp': 'vim/'}
 Bundle 'tpope/vim-rails.git'
 " vim-scripts repos
 Bundle 'L9'

.xinitrc

@@ -1,27 +0,0 @@
-DEFAULT_SESSION=awesome
-
-case $1 in
-urxvt)
-	exec urxvt
-	;;
-awesome)
-	exec awesome
-	;;
-fvwm-crystal)
-	exec fvwm-crystal
-	;;
-fvwm)	exec fvwm
-	;;
-kde)
-	exec startkde
-	;;
-xfce4)
-	exec startxfce4
-	;;
-fluxbox)
-	exec startfluxbox
-	;;
-*)
-	exec $DEFAULT_SESSION
-	;;
-esac

.xprofile

@@ -1 +0,0 @@
-[[ -f ~/.bashrc ]] && . ~/.bashrc

.xscreensaver

@@ -1,299 +0,0 @@
-# XScreenSaver Preferences File
-# Written by xscreensaver-settings 6.07 for kolan on Fri Nov 17 11:56:11 2023.
-# https://www.jwz.org/xscreensaver/
-
-timeout:	0:08:00
-cycle:		0:00:00
-lock:		True
-lockTimeout:	0:30:00
-passwdTimeout:	0:00:30
-visualID:	default
-installColormap:    True
-verbose:	False
-splash:		True
-splashDuration:	0:00:05
-demoCommand:	xscreensaver-settings
-nice:		10
-fade:		True
-unfade:		False
-fadeSeconds:	0:00:03
-ignoreUninstalledPrograms:False
-dpmsEnabled:	True
-dpmsQuickOff:	True
-dpmsStandby:	0:08:00
-dpmsSuspend:	0:08:00
-dpmsOff:	0:08:00
-grabDesktopImages:  False
-grabVideoFrames:    False
-chooseRandomImages: False
-imageDirectory:	
-
-mode:		blank
-selected:	-1
-
-textMode:	date
-textLiteral:	XScreenSaver
-textFile:	/etc/gentoo-release
-textProgram:	fortune
-textURL:	https://planet.gentoo.org/rss20.xml
-dialogTheme:	default
-settingsGeom:	1920,15 -1,-1
-
-programs:								      \
-				maze --root				    \n\
-  GL: 				superquadrics --root			    \n\
-				attraction --root			    \n\
-				blitspin --root				    \n\
-				greynetic --root			    \n\
-				helix --root				    \n\
-				hopalong --root				    \n\
-				imsmap --root				    \n\
--				noseguy --root				    \n\
--				pyro --root				    \n\
-				qix --root				    \n\
--				rocks --root				    \n\
-				rorschach --root			    \n\
-				decayscreen --root			    \n\
-				flame --root				    \n\
-				halo --root				    \n\
-				slidescreen --root			    \n\
-				pedal --root				    \n\
-				bouboule --root				    \n\
--				braid --root				    \n\
-				coral --root				    \n\
-				deco --root				    \n\
-				drift --root				    \n\
--				fadeplot --root				    \n\
-				galaxy --root				    \n\
-				goop --root				    \n\
-				grav --root				    \n\
-				ifs --root				    \n\
-  GL: 				jigsaw --root				    \n\
-				julia --root				    \n\
--				kaleidescope --root			    \n\
-  GL: 				moebius --root				    \n\
-				moire --root				    \n\
-  GL: 				morph3d --root				    \n\
-				mountain --root				    \n\
-				munch --root				    \n\
-				penrose --root				    \n\
-  GL: 				pipes --root				    \n\
-				rdbomb --root				    \n\
-  GL: 				rubik --root				    \n\
--				sierpinski --root			    \n\
-				slip --root				    \n\
-  GL: 				sproingies --root			    \n\
-				starfish --root				    \n\
-				strange --root				    \n\
-				swirl --root				    \n\
-				triangle --root				    \n\
-				xjack --root				    \n\
-				xlyap --root				    \n\
-  GL: 				atlantis --root				    \n\
-				bsod --root				    \n\
-  GL: 				bubble3d --root				    \n\
-  GL: 				cage --root				    \n\
--				crystal --root				    \n\
-				cynosure --root				    \n\
-				discrete --root				    \n\
-				distort --root				    \n\
-				epicycle --root				    \n\
-				flow --root				    \n\
-  GL: 				glplanet --root				    \n\
-				interference --root			    \n\
-				kumppa --root				    \n\
-  GL: 				lament --root				    \n\
-				moire2 --root				    \n\
-  GL: 				sonar --root				    \n\
-  GL: 				stairs --root				    \n\
-				truchet --root				    \n\
--				vidwhacker --root			    \n\
--				webcollage --root			    \n\
-				blaster --root				    \n\
-				bumps --root				    \n\
-				ccurve --root				    \n\
-				compass --root				    \n\
-				deluxe --root				    \n\
--				demon --root				    \n\
-- GL: 				extrusion --root			    \n\
--				loop --root				    \n\
-				penetrate --root			    \n\
-				petri --root				    \n\
-				phosphor --root				    \n\
-  GL: 				pulsar --root				    \n\
-				ripples --root				    \n\
-				shadebobs --root			    \n\
-  GL: 				sierpinski3d --root			    \n\
-				spotlight --root			    \n\
-				squiral --root				    \n\
-				wander --root				    \n\
-				xflame --root				    \n\
-				xmatrix --root				    \n\
-  GL: 				gflux --root				    \n\
--				nerverot --root				    \n\
-				xrayswarm --root			    \n\
-				xspirograph --root			    \n\
-  GL: 				circuit --root				    \n\
-  GL: 				dangerball --root			    \n\
-- GL: 				dnalogo --root				    \n\
-  GL: 				engine --root				    \n\
-  GL: 				flipscreen3d --root			    \n\
-  GL: 				gltext --root				    \n\
-  GL: 				menger --root				    \n\
-  GL: 				molecule --root				    \n\
-				rotzoomer --root			    \n\
-				scooter --root				    \n\
-				speedmine --root			    \n\
-  GL: 				starwars --root				    \n\
-  GL: 				stonerview --root			    \n\
-				vermiculate --root			    \n\
-				whirlwindwarp --root			    \n\
-				zoom --root				    \n\
-				anemone --root				    \n\
-				apollonian --root			    \n\
-  GL: 				boxed --root				    \n\
-  GL: 				cubenetic --root			    \n\
-  GL: 				endgame --root				    \n\
-				euler2d --root				    \n\
-				fluidballs --root			    \n\
-  GL: 				flurry --root				    \n\
-- GL: 				glblur --root				    \n\
-  GL: 				glsnake --root				    \n\
-				halftone --root				    \n\
-  GL: 				juggler3d --root			    \n\
-  GL: 				lavalite --root				    \n\
--				polyominoes --root			    \n\
-  GL: 				queens --root				    \n\
-- GL: 				sballs --root				    \n\
-  GL: 				spheremonics --root			    \n\
-				twang --root				    \n\
-- GL: 				antspotlight --root			    \n\
-				apple2 --root				    \n\
-  GL: 				atunnel --root				    \n\
-				barcode --root				    \n\
-  GL: 				blinkbox --root				    \n\
-  GL: 				blocktube --root			    \n\
-  GL: 				bouncingcow --root			    \n\
-				cloudlife --root			    \n\
-  GL: 				cubestorm --root			    \n\
-				eruption --root				    \n\
-  GL: 				flipflop --root				    \n\
-  GL: 				flyingtoasters --root			    \n\
-				fontglide --root			    \n\
-  GL: 				gleidescope --root			    \n\
-  GL: 				glknots --root				    \n\
-  GL: 				glmatrix --root				    \n\
-- GL: 				glslideshow --root			    \n\
-  GL: 				hypertorus --root			    \n\
-- GL: 				jigglypuff --root			    \n\
-				metaballs --root			    \n\
-  GL: 				mirrorblob --root			    \n\
-				piecewise --root			    \n\
-  GL: 				polytopes --root			    \n\
-				pong --root				    \n\
-				popsquares --root			    \n\
-  GL: 				surfaces --root				    \n\
-				xanalogtv --root			    \n\
-				abstractile --root			    \n\
-				anemotaxis --root			    \n\
-- GL: 				antinspect --root			    \n\
-				fireworkx --root			    \n\
-				fuzzyflakes --root			    \n\
-				interaggregate --root			    \n\
-				intermomentary --root			    \n\
-				memscroller --root			    \n\
-  GL: 				noof --root				    \n\
-				pacman --root				    \n\
-  GL: 				pinion --root				    \n\
-  GL: 				polyhedra --root			    \n\
-- GL: 				providence --root			    \n\
-				substrate --root			    \n\
-				wormhole --root				    \n\
-- GL: 				antmaze --root				    \n\
-  GL: 				boing --root				    \n\
-				boxfit --root				    \n\
-  GL: 				carousel --root				    \n\
-				celtic --root				    \n\
-  GL: 				crackberg --root			    \n\
-  GL: 				cube21 --root				    \n\
-				fiberlamp --root			    \n\
-  GL: 				fliptext --root				    \n\
-  GL: 				glhanoi --root				    \n\
-  GL: 				tangram --root				    \n\
-  GL: 				timetunnel --root			    \n\
-  GL: 				glschool --root				    \n\
-  GL: 				topblock --root				    \n\
-  GL: 				cubicgrid --root			    \n\
-				cwaves --root				    \n\
-  GL: 				gears --root				    \n\
-  GL: 				glcells --root				    \n\
-  GL: 				lockward --root				    \n\
-				m6502 --root				    \n\
-  GL: 				moebiusgears --root			    \n\
-  GL: 				voronoi --root				    \n\
-  GL: 				hypnowheel --root			    \n\
-  GL: 				klein --root				    \n\
--				lcdscrub --root				    \n\
-  GL: 				photopile --root			    \n\
-  GL: 				skytentacles --root			    \n\
-  GL: 				rubikblocks --root			    \n\
-  GL: 				companioncube --root			    \n\
-  GL: 				hilbert --root				    \n\
-  GL: 				tronbit --root				    \n\
-  GL: 				geodesic --root				    \n\
-				hexadrop --root				    \n\
-  GL: 				kaleidocycle --root			    \n\
-  GL: 				quasicrystal --root			    \n\
-  GL: 				unknownpleasures --root			    \n\
-				binaryring --root			    \n\
-  GL: 				cityflow --root				    \n\
-  GL: 				geodesicgears --root			    \n\
-  GL: 				projectiveplane --root			    \n\
-  GL: 				romanboy --root				    \n\
-				tessellimage --root			    \n\
-  GL: 				winduprobot --root			    \n\
-  GL: 				splitflap --root			    \n\
-  GL: 				cubestack --root			    \n\
-  GL: 				cubetwist --root			    \n\
-  GL: 				discoball --root			    \n\
-  GL: 				dymaxionmap --root			    \n\
-  GL: 				energystream --root			    \n\
-  GL: 				hexstrut --root				    \n\
-  GL: 				hydrostat --root			    \n\
-  GL: 				raverhoop --root			    \n\
-  GL: 				splodesic --root			    \n\
-  GL: 				unicrud --root				    \n\
-  GL: 				esper --root				    \n\
-  GL: 				vigilance --root			    \n\
-  GL: 				crumbler --root				    \n\
-				filmleader --root			    \n\
-				glitchpeg --root			    \n\
-  GL: 				handsy --root				    \n\
-  GL: 				maze3d --root				    \n\
-  GL: 				peepers --root				    \n\
-  GL: 				razzledazzle --root			    \n\
-				vfeedback --root			    \n\
-  GL: 				deepstars --root			    \n\
-  GL: 				gravitywell --root			    \n\
-  GL: 				beats --root				    \n\
-  GL: 				covid19 --root				    \n\
-  GL: 				etruscanvenus --root			    \n\
-  GL: 				gibson --root				    \n\
-  GL: 				headroom --root				    \n\
-  GL: 				sphereeversion --root			    \n\
-				binaryhorizon --root			    \n\
-				marbling --root				    \n\
-  GL: 				chompytower --root			    \n\
-  GL: 				hextrail --root				    \n\
-  GL: 				mapscroller --root			    \n\
-  GL: 				nakagin --root				    \n\
-  GL: 				squirtorus --root			    \n\
-  GL: 				cubocteversion --root			    \n\
-				droste --root				    \n\
-  GL: 				papercube --root			    \n\
-  GL: 				skulloop --root				    \n\
-
-
-pointerHysteresis:  10
-authWarningSlack:   20
-