CMake/Modules/FindQt4.cmake

1393 lines
59 KiB
CMake

# - Find Qt 4
# This module can be used to find Qt4.
# The most important issue is that the Qt4 qmake is available via the system path.
# This qmake is then used to detect basically everything else.
# This module defines a number of key variables and macros.
# The variable QT_USE_FILE is set which is the path to a CMake file that can be included
# to compile Qt 4 applications and libraries. It sets up the compilation
# environment for include directories, preprocessor defines and populates a
# QT_LIBRARIES variable.
#
# Typical usage could be something like:
# find_package(Qt4 4.4.3 REQUIRED QtCore QtGui QtXml)
# include(${QT_USE_FILE})
# add_executable(myexe main.cpp)
# target_link_libraries(myexe ${QT_LIBRARIES})
#
# The minimum required version can be specified using the standard find_package()-syntax
# (see example above).
# For compatibility with older versions of FindQt4.cmake it is also possible to
# set the variable QT_MIN_VERSION to the minimum required version of Qt4 before the
# find_package(Qt4) command.
# If both are used, the version used in the find_package() command overrides the
# one from QT_MIN_VERSION.
#
# When using the components argument, QT_USE_QT* variables are automatically set
# for the QT_USE_FILE to pick up. If one wishes to manually set them, the
# available ones to set include:
# QT_DONT_USE_QTCORE
# QT_DONT_USE_QTGUI
# QT_USE_QT3SUPPORT
# QT_USE_QTASSISTANT
# QT_USE_QAXCONTAINER
# QT_USE_QAXSERVER
# QT_USE_QTDESIGNER
# QT_USE_QTMOTIF
# QT_USE_QTMAIN
# QT_USE_QTMULTIMEDIA
# QT_USE_QTNETWORK
# QT_USE_QTNSPLUGIN
# QT_USE_QTOPENGL
# QT_USE_QTSQL
# QT_USE_QTXML
# QT_USE_QTSVG
# QT_USE_QTTEST
# QT_USE_QTUITOOLS
# QT_USE_QTDBUS
# QT_USE_QTSCRIPT
# QT_USE_QTASSISTANTCLIENT
# QT_USE_QTHELP
# QT_USE_QTWEBKIT
# QT_USE_QTXMLPATTERNS
# QT_USE_PHONON
# QT_USE_QTSCRIPTTOOLS
# QT_USE_QTDECLARATIVE
#
# QT_USE_IMPORTED_TARGETS
# If this variable is set to TRUE, FindQt4.cmake will create imported
# library targets for the various Qt libraries and set the
# library variables like QT_QTCORE_LIBRARY to point at these imported
# targets instead of the library file on disk. This provides much better
# handling of the release and debug versions of the Qt libraries and is
# also always backwards compatible, except for the case that dependencies
# of libraries are exported, these will then also list the names of the
# imported targets as dependency and not the file location on disk. This
# is much more flexible, but requires that FindQt4.cmake is executed before
# such an exported dependency file is processed.
#
# Note that if using IMPORTED targets, the qtmain.lib static library is
# automatically linked on Windows. To disable that globally, set the
# QT4_NO_LINK_QTMAIN variable before finding Qt4. To disable that for a
# particular executable, set the QT4_NO_LINK_QTMAIN target property to
# True on the executable.
#
# QT_INCLUDE_DIRS_NO_SYSTEM
# If this variable is set to TRUE, the Qt include directories
# in the QT_USE_FILE will NOT have the SYSTEM keyword set.
#
# There are also some files that need processing by some Qt tools such as moc
# and uic. Listed below are macros that may be used to process those files.
#
# macro QT4_WRAP_CPP(outfiles inputfile ... OPTIONS ...)
# create moc code from a list of files containing Qt class with
# the Q_OBJECT declaration. Per-directory preprocessor definitions
# are also added. Options may be given to moc, such as those found
# when executing "moc -help".
#
# macro QT4_WRAP_UI(outfiles inputfile ... OPTIONS ...)
# create code from a list of Qt designer ui files.
# Options may be given to uic, such as those found
# when executing "uic -help"
#
# macro QT4_ADD_RESOURCES(outfiles inputfile ... OPTIONS ...)
# create code from a list of Qt resource files.
# Options may be given to rcc, such as those found
# when executing "rcc -help"
#
# macro QT4_GENERATE_MOC(inputfile outputfile )
# creates a rule to run moc on infile and create outfile.
# Use this if for some reason QT4_WRAP_CPP() isn't appropriate, e.g.
# because you need a custom filename for the moc file or something similar.
#
# macro QT4_AUTOMOC(sourcefile1 sourcefile2 ... )
# This macro is still experimental.
# It can be used to have moc automatically handled.
# So if you have the files foo.h and foo.cpp, and in foo.h a
# a class uses the Q_OBJECT macro, moc has to run on it. If you don't
# want to use QT4_WRAP_CPP() (which is reliable and mature), you can insert
# #include "foo.moc"
# in foo.cpp and then give foo.cpp as argument to QT4_AUTOMOC(). This will the
# scan all listed files at cmake-time for such included moc files and if it finds
# them cause a rule to be generated to run moc at build time on the
# accompanying header file foo.h.
# If a source file has the SKIP_AUTOMOC property set it will be ignored by this macro.
#
# You should have a look on the AUTOMOC property for targets to achieve the same results.
#
# macro QT4_ADD_DBUS_INTERFACE(outfiles interface basename)
# Create the interface header and implementation files with the
# given basename from the given interface xml file and add it to
# the list of sources.
#
# You can pass additional parameters to the qdbusxml2cpp call by setting
# properties on the input file:
#
# INCLUDE the given file will be included in the generate interface header
#
# CLASSNAME the generated class is named accordingly
#
# NO_NAMESPACE the generated class is not wrapped in a namespace
#
# macro QT4_ADD_DBUS_INTERFACES(outfiles inputfile ... )
# Create the interface header and implementation files
# for all listed interface xml files.
# The basename will be automatically determined from the name of the xml file.
#
# The source file properties described for QT4_ADD_DBUS_INTERFACE also apply here.
#
# macro QT4_ADD_DBUS_ADAPTOR(outfiles xmlfile parentheader parentclassname [basename] [classname])
# create a dbus adaptor (header and implementation file) from the xml file
# describing the interface, and add it to the list of sources. The adaptor
# forwards the calls to a parent class, defined in parentheader and named
# parentclassname. The name of the generated files will be
# <basename>adaptor.{cpp,h} where basename defaults to the basename of the xml file.
# If <classname> is provided, then it will be used as the classname of the
# adaptor itself.
#
# macro QT4_GENERATE_DBUS_INTERFACE( header [interfacename] OPTIONS ...)
# generate the xml interface file from the given header.
# If the optional argument interfacename is omitted, the name of the
# interface file is constructed from the basename of the header with
# the suffix .xml appended.
# Options may be given to qdbuscpp2xml, such as those found when executing "qdbuscpp2xml --help"
#
# macro QT4_CREATE_TRANSLATION( qm_files directories ... sources ...
# ts_files ... OPTIONS ...)
# out: qm_files
# in: directories sources ts_files
# options: flags to pass to lupdate, such as -extensions to specify
# extensions for a directory scan.
# generates commands to create .ts (vie lupdate) and .qm
# (via lrelease) - files from directories and/or sources. The ts files are
# created and/or updated in the source tree (unless given with full paths).
# The qm files are generated in the build tree.
# Updating the translations can be done by adding the qm_files
# to the source list of your library/executable, so they are
# always updated, or by adding a custom target to control when
# they get updated/generated.
#
# macro QT4_ADD_TRANSLATION( qm_files ts_files ... )
# out: qm_files
# in: ts_files
# generates commands to create .qm from .ts - files. The generated
# filenames can be found in qm_files. The ts_files
# must exist and are not updated in any way.
#
# function QT4_USE_MODULES( target [link_type] modules...)
# Make <target> use the <modules> from Qt. Using a Qt module means
# to link to the library, add the relevant include directories for the module,
# and add the relevant compiler defines for using the module.
# Modules are roughly equivalent to components of Qt4, so usage would be
# something like:
# qt4_use_modules(myexe Core Gui Declarative)
# to use QtCore, QtGui and QtDeclarative. The optional <link_type> argument can
# be specified as either LINK_PUBLIC or LINK_PRIVATE to specify the same argument
# to the target_link_libraries call.
#
#
# Below is a detailed list of variables that FindQt4.cmake sets.
# QT_FOUND If false, don't try to use Qt.
# Qt4_FOUND If false, don't try to use Qt 4.
# QT4_FOUND If false, don't try to use Qt 4. This variable is for compatibility only.
#
# QT_VERSION_MAJOR The major version of Qt found.
# QT_VERSION_MINOR The minor version of Qt found.
# QT_VERSION_PATCH The patch version of Qt found.
#
# QT_EDITION Set to the edition of Qt (i.e. DesktopLight)
# QT_EDITION_DESKTOPLIGHT True if QT_EDITION == DesktopLight
# QT_QTCORE_FOUND True if QtCore was found.
# QT_QTGUI_FOUND True if QtGui was found.
# QT_QT3SUPPORT_FOUND True if Qt3Support was found.
# QT_QTASSISTANT_FOUND True if QtAssistant was found.
# QT_QTASSISTANTCLIENT_FOUND True if QtAssistantClient was found.
# QT_QAXCONTAINER_FOUND True if QAxContainer was found (Windows only).
# QT_QAXSERVER_FOUND True if QAxServer was found (Windows only).
# QT_QTDBUS_FOUND True if QtDBus was found.
# QT_QTDESIGNER_FOUND True if QtDesigner was found.
# QT_QTDESIGNERCOMPONENTS True if QtDesignerComponents was found.
# QT_QTHELP_FOUND True if QtHelp was found.
# QT_QTMOTIF_FOUND True if QtMotif was found.
# QT_QTMULTIMEDIA_FOUND True if QtMultimedia was found (since Qt 4.6.0).
# QT_QTNETWORK_FOUND True if QtNetwork was found.
# QT_QTNSPLUGIN_FOUND True if QtNsPlugin was found.
# QT_QTOPENGL_FOUND True if QtOpenGL was found.
# QT_QTSQL_FOUND True if QtSql was found.
# QT_QTSVG_FOUND True if QtSvg was found.
# QT_QTSCRIPT_FOUND True if QtScript was found.
# QT_QTSCRIPTTOOLS_FOUND True if QtScriptTools was found.
# QT_QTTEST_FOUND True if QtTest was found.
# QT_QTUITOOLS_FOUND True if QtUiTools was found.
# QT_QTWEBKIT_FOUND True if QtWebKit was found.
# QT_QTXML_FOUND True if QtXml was found.
# QT_QTXMLPATTERNS_FOUND True if QtXmlPatterns was found.
# QT_PHONON_FOUND True if phonon was found.
# QT_QTDECLARATIVE_FOUND True if QtDeclarative was found.
#
# QT_MAC_USE_COCOA For Mac OS X, its whether Cocoa or Carbon is used.
# In general, this should not be used, but its useful
# when having platform specific code.
#
# QT_DEFINITIONS Definitions to use when compiling code that uses Qt.
# You do not need to use this if you include QT_USE_FILE.
# The QT_USE_FILE will also define QT_DEBUG and QT_NO_DEBUG
# to fit your current build type. Those are not contained
# in QT_DEFINITIONS.
#
# QT_INCLUDES List of paths to all include directories of
# Qt4 QT_INCLUDE_DIR and QT_QTCORE_INCLUDE_DIR are
# always in this variable even if NOTFOUND,
# all other INCLUDE_DIRS are
# only added if they are found.
# You do not need to use this if you include QT_USE_FILE.
#
#
# Include directories for the Qt modules are listed here.
# You do not need to use these variables if you include QT_USE_FILE.
#
# QT_INCLUDE_DIR Path to "include" of Qt4
# QT_QT3SUPPORT_INCLUDE_DIR Path to "include/Qt3Support"
# QT_QTASSISTANT_INCLUDE_DIR Path to "include/QtAssistant"
# QT_QTASSISTANTCLIENT_INCLUDE_DIR Path to "include/QtAssistant"
# QT_QAXCONTAINER_INCLUDE_DIR Path to "include/ActiveQt" (Windows only)
# QT_QAXSERVER_INCLUDE_DIR Path to "include/ActiveQt" (Windows only)
# QT_QTCORE_INCLUDE_DIR Path to "include/QtCore"
# QT_QTDBUS_INCLUDE_DIR Path to "include/QtDBus"
# QT_QTDESIGNER_INCLUDE_DIR Path to "include/QtDesigner"
# QT_QTDESIGNERCOMPONENTS_INCLUDE_DIR Path to "include/QtDesigner"
# QT_QTGUI_INCLUDE_DIR Path to "include/QtGui"
# QT_QTHELP_INCLUDE_DIR Path to "include/QtHelp"
# QT_QTMOTIF_INCLUDE_DIR Path to "include/QtMotif"
# QT_QTMULTIMEDIA_INCLUDE_DIR Path to "include/QtMultimedia"
# QT_QTNETWORK_INCLUDE_DIR Path to "include/QtNetwork"
# QT_QTNSPLUGIN_INCLUDE_DIR Path to "include/QtNsPlugin"
# QT_QTOPENGL_INCLUDE_DIR Path to "include/QtOpenGL"
# QT_QTSCRIPT_INCLUDE_DIR Path to "include/QtScript"
# QT_QTSQL_INCLUDE_DIR Path to "include/QtSql"
# QT_QTSVG_INCLUDE_DIR Path to "include/QtSvg"
# QT_QTTEST_INCLUDE_DIR Path to "include/QtTest"
# QT_QTWEBKIT_INCLUDE_DIR Path to "include/QtWebKit"
# QT_QTXML_INCLUDE_DIR Path to "include/QtXml"
# QT_QTXMLPATTERNS_INCLUDE_DIR Path to "include/QtXmlPatterns"
# QT_PHONON_INCLUDE_DIR Path to "include/phonon"
# QT_QTSCRIPTTOOLS_INCLUDE_DIR Path to "include/QtScriptTools"
# QT_QTDECLARATIVE_INCLUDE_DIR Path to "include/QtDeclarative"
#
# QT_BINARY_DIR Path to "bin" of Qt4
# QT_LIBRARY_DIR Path to "lib" of Qt4
# QT_PLUGINS_DIR Path to "plugins" for Qt4
# QT_TRANSLATIONS_DIR Path to "translations" of Qt4
# QT_IMPORTS_DIR Path to "imports" of Qt4
# QT_DOC_DIR Path to "doc" of Qt4
# QT_MKSPECS_DIR Path to "mkspecs" of Qt4
#
#
# The Qt toolkit may contain both debug and release libraries.
# In that case, the following library variables will contain both.
# You do not need to use these variables if you include QT_USE_FILE,
# and use QT_LIBRARIES.
#
# QT_QT3SUPPORT_LIBRARY The Qt3Support library
# QT_QTASSISTANT_LIBRARY The QtAssistant library
# QT_QTASSISTANTCLIENT_LIBRARY The QtAssistantClient library
# QT_QAXCONTAINER_LIBRARY The QAxContainer library (Windows only)
# QT_QAXSERVER_LIBRARY The QAxServer library (Windows only)
# QT_QTCORE_LIBRARY The QtCore library
# QT_QTDBUS_LIBRARY The QtDBus library
# QT_QTDESIGNER_LIBRARY The QtDesigner library
# QT_QTDESIGNERCOMPONENTS_LIBRARY The QtDesignerComponents library
# QT_QTGUI_LIBRARY The QtGui library
# QT_QTHELP_LIBRARY The QtHelp library
# QT_QTMOTIF_LIBRARY The QtMotif library
# QT_QTMULTIMEDIA_LIBRARY The QtMultimedia library
# QT_QTNETWORK_LIBRARY The QtNetwork library
# QT_QTNSPLUGIN_LIBRARY The QtNsPLugin library
# QT_QTOPENGL_LIBRARY The QtOpenGL library
# QT_QTSCRIPT_LIBRARY The QtScript library
# QT_QTSQL_LIBRARY The QtSql library
# QT_QTSVG_LIBRARY The QtSvg library
# QT_QTTEST_LIBRARY The QtTest library
# QT_QTUITOOLS_LIBRARY The QtUiTools library
# QT_QTWEBKIT_LIBRARY The QtWebKit library
# QT_QTXML_LIBRARY The QtXml library
# QT_QTXMLPATTERNS_LIBRARY The QtXmlPatterns library
# QT_QTMAIN_LIBRARY The qtmain library for Windows
# QT_PHONON_LIBRARY The phonon library
# QT_QTSCRIPTTOOLS_LIBRARY The QtScriptTools library
#
# The QtDeclarative library: QT_QTDECLARATIVE_LIBRARY
#
# also defined, but NOT for general use are
# QT_MOC_EXECUTABLE Where to find the moc tool.
# QT_UIC_EXECUTABLE Where to find the uic tool.
# QT_UIC3_EXECUTABLE Where to find the uic3 tool.
# QT_RCC_EXECUTABLE Where to find the rcc tool
# QT_DBUSCPP2XML_EXECUTABLE Where to find the qdbuscpp2xml tool.
# QT_DBUSXML2CPP_EXECUTABLE Where to find the qdbusxml2cpp tool.
# QT_LUPDATE_EXECUTABLE Where to find the lupdate tool.
# QT_LRELEASE_EXECUTABLE Where to find the lrelease tool.
# QT_QCOLLECTIONGENERATOR_EXECUTABLE Where to find the qcollectiongenerator tool.
# QT_DESIGNER_EXECUTABLE Where to find the Qt designer tool.
# QT_LINGUIST_EXECUTABLE Where to find the Qt linguist tool.
#
#
# These are around for backwards compatibility
# they will be set
# QT_WRAP_CPP Set true if QT_MOC_EXECUTABLE is found
# QT_WRAP_UI Set true if QT_UIC_EXECUTABLE is found
#
# These variables do _NOT_ have any effect anymore (compared to FindQt.cmake)
# QT_MT_REQUIRED Qt4 is now always multithreaded
#
# These variables are set to "" Because Qt structure changed
# (They make no sense in Qt4)
# QT_QT_LIBRARY Qt-Library is now split
#=============================================================================
# Copyright 2005-2009 Kitware, Inc.
#
# Distributed under the OSI-approved BSD License (the "License");
# see accompanying file Copyright.txt for details.
#
# This software is distributed WITHOUT ANY WARRANTY; without even the
# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
# See the License for more information.
#=============================================================================
# (To distribute this file outside of CMake, substitute the full
# License text for the above reference.)
# Use find_package( Qt4 COMPONENTS ... ) to enable modules
if( Qt4_FIND_COMPONENTS )
foreach( component ${Qt4_FIND_COMPONENTS} )
string( TOUPPER ${component} _COMPONENT )
set( QT_USE_${_COMPONENT} 1 )
endforeach()
# To make sure we don't use QtCore or QtGui when not in COMPONENTS
if(NOT QT_USE_QTCORE)
set( QT_DONT_USE_QTCORE 1 )
endif()
if(NOT QT_USE_QTGUI)
set( QT_DONT_USE_QTGUI 1 )
endif()
endif()
# If Qt3 has already been found, fail.
if(QT_QT_LIBRARY)
if(Qt4_FIND_REQUIRED)
message( FATAL_ERROR "Qt3 and Qt4 cannot be used together in one project. If switching to Qt4, the CMakeCache.txt needs to be cleaned.")
else()
if(NOT Qt4_FIND_QUIETLY)
message( STATUS "Qt3 and Qt4 cannot be used together in one project. If switching to Qt4, the CMakeCache.txt needs to be cleaned.")
endif()
return()
endif()
endif()
include(${CMAKE_CURRENT_LIST_DIR}/CheckCXXSymbolExists.cmake)
include(${CMAKE_CURRENT_LIST_DIR}/MacroAddFileDependencies.cmake)
include(${CMAKE_CURRENT_LIST_DIR}/FindPackageHandleStandardArgs.cmake)
set(QT_USE_FILE ${CMAKE_ROOT}/Modules/UseQt4.cmake)
set( QT_DEFINITIONS "")
# convenience macro for dealing with debug/release library names
macro (_QT4_ADJUST_LIB_VARS _camelCaseBasename)
string(TOUPPER "${_camelCaseBasename}" basename)
# The name of the imported targets, i.e. the prefix "Qt4::" must not change,
# since it is stored in EXPORT-files as name of a required library. If the name would change
# here, this would lead to the imported Qt4-library targets not being resolved by cmake anymore.
if (QT_${basename}_LIBRARY_RELEASE OR QT_${basename}_LIBRARY_DEBUG)
if(NOT TARGET Qt4::${_camelCaseBasename})
add_library(Qt4::${_camelCaseBasename} UNKNOWN IMPORTED )
if (QT_${basename}_LIBRARY_RELEASE)
set_property(TARGET Qt4::${_camelCaseBasename} APPEND PROPERTY IMPORTED_CONFIGURATIONS RELEASE)
if(QT_USE_FRAMEWORKS)
set_property(TARGET Qt4::${_camelCaseBasename} PROPERTY IMPORTED_LOCATION_RELEASE "${QT_${basename}_LIBRARY_RELEASE}/${_camelCaseBasename}" )
else()
set_property(TARGET Qt4::${_camelCaseBasename} PROPERTY IMPORTED_LOCATION_RELEASE "${QT_${basename}_LIBRARY_RELEASE}" )
endif()
endif ()
if (QT_${basename}_LIBRARY_DEBUG)
set_property(TARGET Qt4::${_camelCaseBasename} APPEND PROPERTY IMPORTED_CONFIGURATIONS DEBUG)
if(QT_USE_FRAMEWORKS)
set_property(TARGET Qt4::${_camelCaseBasename} PROPERTY IMPORTED_LOCATION_DEBUG "${QT_${basename}_LIBRARY_DEBUG}/${_camelCaseBasename}" )
else()
set_property(TARGET Qt4::${_camelCaseBasename} PROPERTY IMPORTED_LOCATION_DEBUG "${QT_${basename}_LIBRARY_DEBUG}" )
endif()
endif ()
set_property(TARGET Qt4::${_camelCaseBasename} PROPERTY
INTERFACE_INCLUDE_DIRECTORIES
"${QT_${basename}_INCLUDE_DIR}"
)
string(REGEX REPLACE "^QT" "" _stemname ${basename})
set_property(TARGET Qt4::${_camelCaseBasename} PROPERTY
INTERFACE_COMPILE_DEFINITIONS
"QT_${_stemname}_LIB"
)
endif()
# If QT_USE_IMPORTED_TARGETS is enabled, the QT_QTFOO_LIBRARY variables are set to point at these
# imported targets. This works better in general, and is also in almost all cases fully
# backward compatible. The only issue is when a project A which had this enabled then exports its
# libraries via export or export_library_dependencies(). In this case the libraries from project
# A will depend on the imported Qt targets, and the names of these imported targets will be stored
# in the dependency files on disk. This means when a project B then uses project A, these imported
# targets must be created again, otherwise e.g. "Qt4__QtCore" will be interpreted as name of a
# library file on disk, and not as a target, and linking will fail:
if(QT_USE_IMPORTED_TARGETS)
set(QT_${basename}_LIBRARY Qt4::${_camelCaseBasename} )
set(QT_${basename}_LIBRARIES Qt4::${_camelCaseBasename} )
else()
# if the release- as well as the debug-version of the library have been found:
if (QT_${basename}_LIBRARY_DEBUG AND QT_${basename}_LIBRARY_RELEASE)
# if the generator supports configuration types then set
# optimized and debug libraries, or if the CMAKE_BUILD_TYPE has a value
if (CMAKE_CONFIGURATION_TYPES OR CMAKE_BUILD_TYPE)
set(QT_${basename}_LIBRARY optimized ${QT_${basename}_LIBRARY_RELEASE} debug ${QT_${basename}_LIBRARY_DEBUG})
else()
# if there are no configuration types and CMAKE_BUILD_TYPE has no value
# then just use the release libraries
set(QT_${basename}_LIBRARY ${QT_${basename}_LIBRARY_RELEASE} )
endif()
set(QT_${basename}_LIBRARIES optimized ${QT_${basename}_LIBRARY_RELEASE} debug ${QT_${basename}_LIBRARY_DEBUG})
endif ()
# if only the release version was found, set the debug variable also to the release version
if (QT_${basename}_LIBRARY_RELEASE AND NOT QT_${basename}_LIBRARY_DEBUG)
set(QT_${basename}_LIBRARY_DEBUG ${QT_${basename}_LIBRARY_RELEASE})
set(QT_${basename}_LIBRARY ${QT_${basename}_LIBRARY_RELEASE})
set(QT_${basename}_LIBRARIES ${QT_${basename}_LIBRARY_RELEASE})
endif ()
# if only the debug version was found, set the release variable also to the debug version
if (QT_${basename}_LIBRARY_DEBUG AND NOT QT_${basename}_LIBRARY_RELEASE)
set(QT_${basename}_LIBRARY_RELEASE ${QT_${basename}_LIBRARY_DEBUG})
set(QT_${basename}_LIBRARY ${QT_${basename}_LIBRARY_DEBUG})
set(QT_${basename}_LIBRARIES ${QT_${basename}_LIBRARY_DEBUG})
endif ()
# put the value in the cache:
set(QT_${basename}_LIBRARY ${QT_${basename}_LIBRARY} CACHE STRING "The Qt ${basename} library" FORCE)
endif()
set(QT_${basename}_FOUND 1)
else ()
set(QT_${basename}_LIBRARY "" CACHE STRING "The Qt ${basename} library" FORCE)
endif ()
if (QT_${basename}_INCLUDE_DIR)
#add the include directory to QT_INCLUDES
set(QT_INCLUDES "${QT_${basename}_INCLUDE_DIR}" ${QT_INCLUDES})
endif ()
# Make variables changeable to the advanced user
mark_as_advanced(QT_${basename}_LIBRARY QT_${basename}_LIBRARY_RELEASE QT_${basename}_LIBRARY_DEBUG QT_${basename}_INCLUDE_DIR)
endmacro ()
function(_QT4_QUERY_QMAKE VAR RESULT)
execute_process(COMMAND "${QT_QMAKE_EXECUTABLE}" -query ${VAR}
RESULT_VARIABLE return_code
OUTPUT_VARIABLE output
OUTPUT_STRIP_TRAILING_WHITESPACE ERROR_STRIP_TRAILING_WHITESPACE)
if(NOT return_code)
file(TO_CMAKE_PATH "${output}" output)
set(${RESULT} ${output} PARENT_SCOPE)
endif()
endfunction()
function(_QT4_GET_VERSION_COMPONENTS VERSION RESULT_MAJOR RESULT_MINOR RESULT_PATCH)
string(REGEX REPLACE "^([0-9]+)\\.[0-9]+\\.[0-9]+.*" "\\1" QT_VERSION_MAJOR "${QTVERSION}")
string(REGEX REPLACE "^[0-9]+\\.([0-9]+)\\.[0-9]+.*" "\\1" QT_VERSION_MINOR "${QTVERSION}")
string(REGEX REPLACE "^[0-9]+\\.[0-9]+\\.([0-9]+).*" "\\1" QT_VERSION_PATCH "${QTVERSION}")
set(${RESULT_MAJOR} ${QT_VERSION_MAJOR} PARENT_SCOPE)
set(${RESULT_MINOR} ${QT_VERSION_MINOR} PARENT_SCOPE)
set(${RESULT_PATCH} ${QT_VERSION_PATCH} PARENT_SCOPE)
endfunction()
function(_QT4_FIND_QMAKE QMAKE_NAMES QMAKE_RESULT VERSION_RESULT)
list(LENGTH QMAKE_NAMES QMAKE_NAMES_LEN)
if(${QMAKE_NAMES_LEN} EQUAL 0)
return()
endif()
list(GET QMAKE_NAMES 0 QMAKE_NAME)
get_filename_component(qt_install_version "[HKEY_CURRENT_USER\\Software\\trolltech\\Versions;DefaultQtVersion]" NAME)
find_program(QT_QMAKE_EXECUTABLE NAMES ${QMAKE_NAME}
PATHS
ENV QTDIR
"[HKEY_CURRENT_USER\\Software\\Trolltech\\Versions\\${qt_install_version};InstallDir]"
PATH_SUFFIXES bin
DOC "The qmake executable for the Qt installation to use"
)
set(major 0)
if (QT_QMAKE_EXECUTABLE)
_qt4_query_qmake(QT_VERSION QTVERSION)
_qt4_get_version_components("${QTVERSION}" major minor patch)
endif()
if (NOT QT_QMAKE_EXECUTABLE OR NOT "${major}" EQUAL 4)
set(curr_qmake "${QT_QMAKE_EXECUTABLE}")
set(curr_qt_version "${QTVERSION}")
set(QT_QMAKE_EXECUTABLE NOTFOUND CACHE FILEPATH "" FORCE)
list(REMOVE_AT QMAKE_NAMES 0)
_qt4_find_qmake("${QMAKE_NAMES}" QMAKE QTVERSION)
_qt4_get_version_components("${QTVERSION}" major minor patch)
if (NOT ${major} EQUAL 4)
# Restore possibly found qmake and it's version; these are used later
# in error message if incorrect version is found
set(QT_QMAKE_EXECUTABLE "${curr_qmake}" CACHE FILEPATH "" FORCE)
set(QTVERSION "${curr_qt_version}")
endif()
endif()
set(${QMAKE_RESULT} "${QT_QMAKE_EXECUTABLE}" PARENT_SCOPE)
set(${VERSION_RESULT} "${QTVERSION}" PARENT_SCOPE)
endfunction()
set(QT4_INSTALLED_VERSION_TOO_OLD FALSE)
set(_QT4_QMAKE_NAMES qmake qmake4 qmake-qt4 qmake-mac)
_qt4_find_qmake("${_QT4_QMAKE_NAMES}" QT_QMAKE_EXECUTABLE QTVERSION)
if (QT_QMAKE_EXECUTABLE AND QTVERSION)
_qt4_get_version_components("${QTVERSION}" QT_VERSION_MAJOR QT_VERSION_MINOR QT_VERSION_PATCH)
# ask qmake for the mkspecs directory
# we do this first because QT_LIBINFIX might be set
if (NOT QT_MKSPECS_DIR OR QT_QMAKE_CHANGED)
_qt4_query_qmake(QMAKE_MKSPECS qt_mkspecs_dirs)
# do not replace : on windows as it might be a drive letter
# and windows should already use ; as a separator
if(NOT WIN32)
string(REPLACE ":" ";" qt_mkspecs_dirs "${qt_mkspecs_dirs}")
endif()
set(qt_cross_paths)
foreach(qt_cross_path ${CMAKE_FIND_ROOT_PATH})
set(qt_cross_paths ${qt_cross_paths} "${qt_cross_path}/mkspecs")
endforeach()
set(QT_MKSPECS_DIR NOTFOUND)
find_path(QT_MKSPECS_DIR NAMES qconfig.pri
HINTS ${qt_cross_paths} ${qt_mkspecs_dirs}
DOC "The location of the Qt mkspecs containing qconfig.pri")
endif()
if(EXISTS "${QT_MKSPECS_DIR}/qconfig.pri")
file(READ ${QT_MKSPECS_DIR}/qconfig.pri _qconfig_FILE_contents)
string(REGEX MATCH "QT_CONFIG[^\n]+" QT_QCONFIG "${_qconfig_FILE_contents}")
string(REGEX MATCH "CONFIG[^\n]+" QT_CONFIG "${_qconfig_FILE_contents}")
string(REGEX MATCH "EDITION[^\n]+" QT_EDITION "${_qconfig_FILE_contents}")
string(REGEX MATCH "QT_LIBINFIX[^\n]+" _qconfig_qt_libinfix "${_qconfig_FILE_contents}")
string(REGEX REPLACE "QT_LIBINFIX *= *([^\n]*)" "\\1" QT_LIBINFIX "${_qconfig_qt_libinfix}")
endif()
if("${QT_EDITION}" MATCHES "DesktopLight")
set(QT_EDITION_DESKTOPLIGHT 1)
endif()
# ask qmake for the library dir as a hint, then search for QtCore library and use that as a reference for finding the
# others and for setting QT_LIBRARY_DIR
if (NOT (QT_QTCORE_LIBRARY_RELEASE OR QT_QTCORE_LIBRARY_DEBUG) OR QT_QMAKE_CHANGED)
_qt4_query_qmake(QT_INSTALL_LIBS QT_LIBRARY_DIR_TMP)
set(QT_QTCORE_LIBRARY_RELEASE NOTFOUND)
set(QT_QTCORE_LIBRARY_DEBUG NOTFOUND)
find_library(QT_QTCORE_LIBRARY_RELEASE
NAMES QtCore${QT_LIBINFIX} QtCore${QT_LIBINFIX}4
HINTS ${QT_LIBRARY_DIR_TMP}
NO_DEFAULT_PATH
)
find_library(QT_QTCORE_LIBRARY_DEBUG
NAMES QtCore${QT_LIBINFIX}_debug QtCore${QT_LIBINFIX}d QtCore${QT_LIBINFIX}d4
HINTS ${QT_LIBRARY_DIR_TMP}
NO_DEFAULT_PATH
)
if(NOT QT_QTCORE_LIBRARY_RELEASE AND NOT QT_QTCORE_LIBRARY_DEBUG)
find_library(QT_QTCORE_LIBRARY_RELEASE
NAMES QtCore${QT_LIBINFIX} QtCore${QT_LIBINFIX}4
HINTS ${QT_LIBRARY_DIR_TMP}
)
find_library(QT_QTCORE_LIBRARY_DEBUG
NAMES QtCore${QT_LIBINFIX}_debug QtCore${QT_LIBINFIX}d QtCore${QT_LIBINFIX}d4
HINTS ${QT_LIBRARY_DIR_TMP}
)
endif()
# try dropping a hint if trying to use Visual Studio with Qt built by MinGW
if(NOT QT_QTCORE_LIBRARY_RELEASE AND MSVC)
if(EXISTS ${QT_LIBRARY_DIR_TMP}/libqtmain.a)
message( FATAL_ERROR "It appears you're trying to use Visual Studio with Qt built by MinGW. Those compilers do not produce code compatible with each other.")
endif()
endif()
endif ()
# set QT_LIBRARY_DIR based on location of QtCore found.
if(QT_QTCORE_LIBRARY_RELEASE)
get_filename_component(QT_LIBRARY_DIR_TMP "${QT_QTCORE_LIBRARY_RELEASE}" PATH)
set(QT_LIBRARY_DIR ${QT_LIBRARY_DIR_TMP} CACHE INTERNAL "Qt library dir" FORCE)
set(QT_QTCORE_FOUND 1)
elseif(QT_QTCORE_LIBRARY_DEBUG)
get_filename_component(QT_LIBRARY_DIR_TMP "${QT_QTCORE_LIBRARY_DEBUG}" PATH)
set(QT_LIBRARY_DIR ${QT_LIBRARY_DIR_TMP} CACHE INTERNAL "Qt library dir" FORCE)
set(QT_QTCORE_FOUND 1)
else()
message(WARNING "${QT_QMAKE_EXECUTABLE} reported QT_INSTALL_LIBS as \"${QT_LIBRARY_DIR_TMP}\" "
"but QtCore could not be found there. "
"Qt is NOT installed correctly for the target build environment.")
if(Qt4_FIND_REQUIRED)
message( FATAL_ERROR "Could NOT find QtCore. Check ${CMAKE_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/CMakeError.log for more details.")
endif()
endif()
# ask qmake for the binary dir
if (NOT QT_BINARY_DIR OR QT_QMAKE_CHANGED)
_qt4_query_qmake(QT_INSTALL_BINS qt_bins)
set(QT_BINARY_DIR ${qt_bins} CACHE INTERNAL "" FORCE)
endif ()
if (APPLE)
set(CMAKE_FIND_FRAMEWORK_OLD ${CMAKE_FIND_FRAMEWORK})
if (EXISTS ${QT_LIBRARY_DIR}/QtCore.framework)
set(QT_USE_FRAMEWORKS ON CACHE INTERNAL "" FORCE)
set(CMAKE_FIND_FRAMEWORK FIRST)
else ()
set(QT_USE_FRAMEWORKS OFF CACHE INTERNAL "" FORCE)
set(CMAKE_FIND_FRAMEWORK LAST)
endif ()
endif ()
# ask qmake for the include dir
if (QT_LIBRARY_DIR AND (NOT QT_QTCORE_INCLUDE_DIR OR NOT QT_HEADERS_DIR OR QT_QMAKE_CHANGED))
_qt4_query_qmake(QT_INSTALL_HEADERS qt_headers)
set(QT_QTCORE_INCLUDE_DIR NOTFOUND)
find_path(QT_QTCORE_INCLUDE_DIR QtCore
HINTS ${qt_headers} ${QT_LIBRARY_DIR}
PATH_SUFFIXES QtCore qt4/QtCore
NO_DEFAULT_PATH
)
if(NOT QT_QTCORE_INCLUDE_DIR)
find_path(QT_QTCORE_INCLUDE_DIR QtCore
HINTS ${qt_headers} ${QT_LIBRARY_DIR}
PATH_SUFFIXES QtCore qt4/QtCore
)
endif()
# Set QT_HEADERS_DIR based on finding QtCore header
if(QT_QTCORE_INCLUDE_DIR)
if(QT_USE_FRAMEWORKS)
set(QT_HEADERS_DIR "${qt_headers}" CACHE INTERNAL "" FORCE)
else()
get_filename_component(qt_headers "${QT_QTCORE_INCLUDE_DIR}/../" ABSOLUTE)
set(QT_HEADERS_DIR "${qt_headers}" CACHE INTERNAL "" FORCE)
endif()
elseif()
message("Warning: QT_QMAKE_EXECUTABLE reported QT_INSTALL_HEADERS as ${qt_headers}")
message("Warning: But QtCore couldn't be found. Qt must NOT be installed correctly.")
endif()
endif()
if(APPLE)
set(CMAKE_FIND_FRAMEWORK ${CMAKE_FIND_FRAMEWORK_OLD})
endif()
# Set QT_INCLUDE_DIR based on QT_HEADERS_DIR
if(QT_HEADERS_DIR)
if(QT_USE_FRAMEWORKS)
# Qt/Mac frameworks has two include dirs.
# One is the framework include for which CMake will add a -F flag
# and the other is an include dir for non-framework Qt modules
set(QT_INCLUDE_DIR ${QT_HEADERS_DIR} ${QT_QTCORE_LIBRARY_RELEASE} )
else()
set(QT_INCLUDE_DIR ${QT_HEADERS_DIR})
endif()
endif()
# Set QT_INCLUDES
set( QT_INCLUDES ${QT_MKSPECS_DIR}/default ${QT_INCLUDE_DIR} ${QT_QTCORE_INCLUDE_DIR})
# ask qmake for the documentation directory
if (QT_LIBRARY_DIR AND NOT QT_DOC_DIR OR QT_QMAKE_CHANGED)
_qt4_query_qmake(QT_INSTALL_DOCS qt_doc_dir)
set(QT_DOC_DIR ${qt_doc_dir} CACHE PATH "The location of the Qt docs" FORCE)
endif ()
# ask qmake for the plugins directory
if (QT_LIBRARY_DIR AND NOT QT_PLUGINS_DIR OR QT_QMAKE_CHANGED)
_qt4_query_qmake(QT_INSTALL_PLUGINS qt_plugins_dir)
set(QT_PLUGINS_DIR NOTFOUND)
foreach(qt_cross_path ${CMAKE_FIND_ROOT_PATH})
set(qt_cross_paths ${qt_cross_paths} "${qt_cross_path}/plugins")
endforeach()
find_path(QT_PLUGINS_DIR NAMES accessible imageformats sqldrivers codecs designer
HINTS ${qt_cross_paths} ${qt_plugins_dir}
DOC "The location of the Qt plugins")
endif ()
# ask qmake for the translations directory
if (QT_LIBRARY_DIR AND NOT QT_TRANSLATIONS_DIR OR QT_QMAKE_CHANGED)
_qt4_query_qmake(QT_INSTALL_TRANSLATIONS qt_translations_dir)
set(QT_TRANSLATIONS_DIR ${qt_translations_dir} CACHE PATH "The location of the Qt translations" FORCE)
endif ()
# ask qmake for the imports directory
if (QT_LIBRARY_DIR AND NOT QT_IMPORTS_DIR OR QT_QMAKE_CHANGED)
_qt4_query_qmake(QT_INSTALL_IMPORTS qt_imports_dir)
if(qt_imports_dir)
set(QT_IMPORTS_DIR NOTFOUND)
foreach(qt_cross_path ${CMAKE_FIND_ROOT_PATH})
set(qt_cross_paths ${qt_cross_paths} "${qt_cross_path}/imports")
endforeach()
find_path(QT_IMPORTS_DIR NAMES Qt
HINTS ${qt_cross_paths} ${qt_imports_dir}
DOC "The location of the Qt imports"
NO_CMAKE_PATH NO_CMAKE_ENVIRONMENT_PATH NO_SYSTEM_ENVIRONMENT_PATH
NO_CMAKE_SYSTEM_PATH)
mark_as_advanced(QT_IMPORTS_DIR)
endif()
endif ()
# Make variables changeable to the advanced user
mark_as_advanced( QT_LIBRARY_DIR QT_DOC_DIR QT_MKSPECS_DIR
QT_PLUGINS_DIR QT_TRANSLATIONS_DIR)
#############################################
#
# Find out what window system we're using
#
#############################################
# Save required variable
set(CMAKE_REQUIRED_INCLUDES_SAVE ${CMAKE_REQUIRED_INCLUDES})
set(CMAKE_REQUIRED_FLAGS_SAVE ${CMAKE_REQUIRED_FLAGS})
# Add QT_INCLUDE_DIR to CMAKE_REQUIRED_INCLUDES
set(CMAKE_REQUIRED_INCLUDES "${CMAKE_REQUIRED_INCLUDES};${QT_INCLUDE_DIR}")
# Check for Window system symbols (note: only one should end up being set)
CHECK_CXX_SYMBOL_EXISTS(Q_WS_X11 "QtCore/qglobal.h" Q_WS_X11)
CHECK_CXX_SYMBOL_EXISTS(Q_WS_WIN "QtCore/qglobal.h" Q_WS_WIN)
CHECK_CXX_SYMBOL_EXISTS(Q_WS_QWS "QtCore/qglobal.h" Q_WS_QWS)
CHECK_CXX_SYMBOL_EXISTS(Q_WS_MAC "QtCore/qglobal.h" Q_WS_MAC)
if(Q_WS_MAC)
if(QT_QMAKE_CHANGED)
unset(QT_MAC_USE_COCOA CACHE)
endif()
CHECK_CXX_SYMBOL_EXISTS(QT_MAC_USE_COCOA "QtCore/qconfig.h" QT_MAC_USE_COCOA)
endif()
if (QT_QTCOPY_REQUIRED)
CHECK_CXX_SYMBOL_EXISTS(QT_IS_QTCOPY "QtCore/qglobal.h" QT_KDE_QT_COPY)
if (NOT QT_IS_QTCOPY)
message(FATAL_ERROR "qt-copy is required, but hasn't been found")
endif ()
endif ()
# Restore CMAKE_REQUIRED_INCLUDES and CMAKE_REQUIRED_FLAGS variables
set(CMAKE_REQUIRED_INCLUDES ${CMAKE_REQUIRED_INCLUDES_SAVE})
set(CMAKE_REQUIRED_FLAGS ${CMAKE_REQUIRED_FLAGS_SAVE})
#
#############################################
########################################
#
# Setting the INCLUDE-Variables
#
########################################
set(QT_MODULES QtGui Qt3Support QtSvg QtScript QtTest QtUiTools
QtHelp QtWebKit QtXmlPatterns phonon QtNetwork QtMultimedia
QtNsPlugin QtOpenGL QtSql QtXml QtDesigner QtDBus QtScriptTools
QtDeclarative)
if(Q_WS_X11)
set(QT_MODULES ${QT_MODULES} QtMotif)
endif()
if(QT_QMAKE_CHANGED)
foreach(QT_MODULE ${QT_MODULES})
string(TOUPPER ${QT_MODULE} _upper_qt_module)
set(QT_${_upper_qt_module}_INCLUDE_DIR NOTFOUND)
set(QT_${_upper_qt_module}_LIBRARY_RELEASE NOTFOUND)
set(QT_${_upper_qt_module}_LIBRARY_DEBUG NOTFOUND)
endforeach()
set(QT_QTDESIGNERCOMPONENTS_INCLUDE_DIR NOTFOUND)
set(QT_QTDESIGNERCOMPONENTS_LIBRARY_RELEASE NOTFOUND)
set(QT_QTDESIGNERCOMPONENTS_LIBRARY_DEBUG NOTFOUND)
set(QT_QTASSISTANTCLIENT_INCLUDE_DIR NOTFOUND)
set(QT_QTASSISTANTCLIENT_LIBRARY_RELEASE NOTFOUND)
set(QT_QTASSISTANTCLIENT_LIBRARY_DEBUG NOTFOUND)
set(QT_QTASSISTANT_INCLUDE_DIR NOTFOUND)
set(QT_QTASSISTANT_LIBRARY_RELEASE NOTFOUND)
set(QT_QTASSISTANT_LIBRARY_DEBUG NOTFOUND)
set(QT_QTCLUCENE_LIBRARY_RELEASE NOTFOUND)
set(QT_QTCLUCENE_LIBRARY_DEBUG NOTFOUND)
set(QT_QAXCONTAINER_INCLUDE_DIR NOTFOUND)
set(QT_QAXCONTAINER_LIBRARY_RELEASE NOTFOUND)
set(QT_QAXCONTAINER_LIBRARY_DEBUG NOTFOUND)
set(QT_QAXSERVER_INCLUDE_DIR NOTFOUND)
set(QT_QAXSERVER_LIBRARY_RELEASE NOTFOUND)
set(QT_QAXSERVER_LIBRARY_DEBUG NOTFOUND)
if(Q_WS_WIN)
set(QT_QTMAIN_LIBRARY_DEBUG NOTFOUND)
set(QT_QTMAIN_LIBRARY_RELEASE NOTFOUND)
endif()
endif()
foreach(QT_MODULE ${QT_MODULES})
string(TOUPPER ${QT_MODULE} _upper_qt_module)
find_path(QT_${_upper_qt_module}_INCLUDE_DIR ${QT_MODULE}
PATHS
${QT_HEADERS_DIR}/${QT_MODULE}
${QT_LIBRARY_DIR}/${QT_MODULE}.framework/Headers
NO_DEFAULT_PATH NO_CMAKE_FIND_ROOT_PATH
)
# phonon doesn't seem consistent, let's try phonondefs.h for some
# installations
if(${QT_MODULE} STREQUAL "phonon")
find_path(QT_${_upper_qt_module}_INCLUDE_DIR phonondefs.h
PATHS
${QT_HEADERS_DIR}/${QT_MODULE}
${QT_LIBRARY_DIR}/${QT_MODULE}.framework/Headers
NO_DEFAULT_PATH NO_CMAKE_FIND_ROOT_PATH
)
endif()
endforeach()
if(Q_WS_WIN)
set(QT_MODULES ${QT_MODULES} QAxContainer QAxServer)
# Set QT_AXCONTAINER_INCLUDE_DIR and QT_AXSERVER_INCLUDE_DIR
find_path(QT_QAXCONTAINER_INCLUDE_DIR ActiveQt
PATHS ${QT_HEADERS_DIR}/ActiveQt
NO_DEFAULT_PATH NO_CMAKE_FIND_ROOT_PATH
)
find_path(QT_QAXSERVER_INCLUDE_DIR ActiveQt
PATHS ${QT_HEADERS_DIR}/ActiveQt
NO_DEFAULT_PATH NO_CMAKE_FIND_ROOT_PATH
)
endif()
# Set QT_QTDESIGNERCOMPONENTS_INCLUDE_DIR
find_path(QT_QTDESIGNERCOMPONENTS_INCLUDE_DIR QDesignerComponents
PATHS
${QT_HEADERS_DIR}/QtDesigner
${QT_LIBRARY_DIR}/QtDesigner.framework/Headers
NO_DEFAULT_PATH NO_CMAKE_FIND_ROOT_PATH
)
# Set QT_QTASSISTANT_INCLUDE_DIR
find_path(QT_QTASSISTANT_INCLUDE_DIR QtAssistant
PATHS
${QT_HEADERS_DIR}/QtAssistant
${QT_LIBRARY_DIR}/QtAssistant.framework/Headers
NO_DEFAULT_PATH NO_CMAKE_FIND_ROOT_PATH
)
# Set QT_QTASSISTANTCLIENT_INCLUDE_DIR
find_path(QT_QTASSISTANTCLIENT_INCLUDE_DIR QAssistantClient
PATHS
${QT_HEADERS_DIR}/QtAssistant
${QT_LIBRARY_DIR}/QtAssistant.framework/Headers
NO_DEFAULT_PATH NO_CMAKE_FIND_ROOT_PATH
)
########################################
#
# Setting the LIBRARY-Variables
#
########################################
# find the libraries
foreach(QT_MODULE ${QT_MODULES})
string(TOUPPER ${QT_MODULE} _upper_qt_module)
find_library(QT_${_upper_qt_module}_LIBRARY_RELEASE
NAMES ${QT_MODULE}${QT_LIBINFIX} ${QT_MODULE}${QT_LIBINFIX}4
PATHS ${QT_LIBRARY_DIR} NO_DEFAULT_PATH NO_CMAKE_FIND_ROOT_PATH
)
find_library(QT_${_upper_qt_module}_LIBRARY_DEBUG
NAMES ${QT_MODULE}${QT_LIBINFIX}_debug ${QT_MODULE}${QT_LIBINFIX}d ${QT_MODULE}${QT_LIBINFIX}d4
PATHS ${QT_LIBRARY_DIR} NO_DEFAULT_PATH NO_CMAKE_FIND_ROOT_PATH
)
if(QT_${_upper_qt_module}_LIBRARY_RELEASE MATCHES "/${QT_MODULE}\\.framework$")
if(NOT EXISTS "${QT_${_upper_qt_module}_LIBRARY_RELEASE}/${QT_MODULE}")
# Release framework library file does not exist... Force to NOTFOUND:
set(QT_${_upper_qt_module}_LIBRARY_RELEASE "QT_${_upper_qt_module}_LIBRARY_RELEASE-NOTFOUND" CACHE FILEPATH "Path to a library." FORCE)
endif()
endif()
if(QT_${_upper_qt_module}_LIBRARY_DEBUG MATCHES "/${QT_MODULE}\\.framework$")
if(NOT EXISTS "${QT_${_upper_qt_module}_LIBRARY_DEBUG}/${QT_MODULE}")
# Debug framework library file does not exist... Force to NOTFOUND:
set(QT_${_upper_qt_module}_LIBRARY_DEBUG "QT_${_upper_qt_module}_LIBRARY_DEBUG-NOTFOUND" CACHE FILEPATH "Path to a library." FORCE)
endif()
endif()
endforeach()
# QtUiTools is sometimes not in the same directory as the other found libraries
# e.g. on Mac, its never a framework like the others are
if(QT_QTCORE_LIBRARY_RELEASE AND NOT QT_QTUITOOLS_LIBRARY_RELEASE)
find_library(QT_QTUITOOLS_LIBRARY_RELEASE NAMES QtUiTools${QT_LIBINFIX} PATHS ${QT_LIBRARY_DIR})
endif()
# Set QT_QTDESIGNERCOMPONENTS_LIBRARY
find_library(QT_QTDESIGNERCOMPONENTS_LIBRARY_RELEASE NAMES QtDesignerComponents${QT_LIBINFIX} QtDesignerComponents${QT_LIBINFIX}4 PATHS ${QT_LIBRARY_DIR} NO_DEFAULT_PATH NO_CMAKE_FIND_ROOT_PATH)
find_library(QT_QTDESIGNERCOMPONENTS_LIBRARY_DEBUG NAMES QtDesignerComponents${QT_LIBINFIX}_debug QtDesignerComponents${QT_LIBINFIX}d QtDesignerComponents${QT_LIBINFIX}d4 PATHS ${QT_LIBRARY_DIR} NO_DEFAULT_PATH NO_CMAKE_FIND_ROOT_PATH)
# Set QT_QTMAIN_LIBRARY
if(Q_WS_WIN)
find_library(QT_QTMAIN_LIBRARY_RELEASE NAMES qtmain${QT_LIBINFIX} PATHS ${QT_LIBRARY_DIR} NO_DEFAULT_PATH NO_CMAKE_FIND_ROOT_PATH)
find_library(QT_QTMAIN_LIBRARY_DEBUG NAMES qtmain${QT_LIBINFIX}d PATHS ${QT_LIBRARY_DIR} NO_DEFAULT_PATH NO_CMAKE_FIND_ROOT_PATH)
endif()
# Set QT_QTASSISTANTCLIENT_LIBRARY
find_library(QT_QTASSISTANTCLIENT_LIBRARY_RELEASE NAMES QtAssistantClient${QT_LIBINFIX} QtAssistantClient${QT_LIBINFIX}4 PATHS ${QT_LIBRARY_DIR} NO_DEFAULT_PATH NO_CMAKE_FIND_ROOT_PATH)
find_library(QT_QTASSISTANTCLIENT_LIBRARY_DEBUG NAMES QtAssistantClient${QT_LIBINFIX}_debug QtAssistantClient${QT_LIBINFIX}d QtAssistantClient${QT_LIBINFIX}d4 PATHS ${QT_LIBRARY_DIR} NO_DEFAULT_PATH NO_CMAKE_FIND_ROOT_PATH)
# Set QT_QTASSISTANT_LIBRARY
find_library(QT_QTASSISTANT_LIBRARY_RELEASE NAMES QtAssistantClient${QT_LIBINFIX} QtAssistantClient${QT_LIBINFIX}4 QtAssistant${QT_LIBINFIX} QtAssistant${QT_LIBINFIX}4 PATHS ${QT_LIBRARY_DIR} NO_DEFAULT_PATH NO_CMAKE_FIND_ROOT_PATH)
find_library(QT_QTASSISTANT_LIBRARY_DEBUG NAMES QtAssistantClient${QT_LIBINFIX}_debug QtAssistantClient${QT_LIBINFIX}d QtAssistantClient${QT_LIBINFIX}d4 QtAssistant${QT_LIBINFIX}_debug QtAssistant${QT_LIBINFIX}d4 PATHS ${QT_LIBRARY_DIR} NO_DEFAULT_PATH NO_CMAKE_FIND_ROOT_PATH)
# Set QT_QTHELP_LIBRARY
find_library(QT_QTCLUCENE_LIBRARY_RELEASE NAMES QtCLucene${QT_LIBINFIX} QtCLucene${QT_LIBINFIX}4 PATHS ${QT_LIBRARY_DIR} NO_DEFAULT_PATH NO_CMAKE_FIND_ROOT_PATH)
find_library(QT_QTCLUCENE_LIBRARY_DEBUG NAMES QtCLucene${QT_LIBINFIX}_debug QtCLucene${QT_LIBINFIX}d QtCLucene${QT_LIBINFIX}d4 PATHS ${QT_LIBRARY_DIR} NO_DEFAULT_PATH NO_CMAKE_FIND_ROOT_PATH)
if(Q_WS_MAC AND QT_QTCORE_LIBRARY_RELEASE AND NOT QT_QTCLUCENE_LIBRARY_RELEASE)
find_library(QT_QTCLUCENE_LIBRARY_RELEASE NAMES QtCLucene${QT_LIBINFIX} PATHS ${QT_LIBRARY_DIR})
endif()
############################################
#
# Check the existence of the libraries.
#
############################################
macro(_qt4_add_target_depends_internal _QT_MODULE _PROPERTY)
if (TARGET Qt4::${_QT_MODULE})
foreach(_DEPEND ${ARGN})
set(_VALID_DEPENDS)
if (TARGET Qt4::Qt${_DEPEND})
list(APPEND _VALID_DEPENDS Qt4::Qt${_DEPEND})
endif()
if (_VALID_DEPENDS)
set_property(TARGET Qt4::${_QT_MODULE} APPEND PROPERTY
${_PROPERTY}
"${_VALID_DEPENDS}"
)
endif()
set(_VALID_DEPENDS)
endforeach()
endif()
endmacro()
macro(_qt4_add_target_depends _QT_MODULE)
get_target_property(_configs Qt4::${_QT_MODULE} IMPORTED_CONFIGURATIONS)
foreach(_config ${_configs})
_qt4_add_target_depends_internal(${_QT_MODULE} IMPORTED_LINK_INTERFACE_LIBRARIES_${_config} ${ARGN})
endforeach()
set(_configs)
endmacro()
macro(_qt4_add_target_private_depends _QT_MODULE)
get_target_property(_configs ${_QT_MODULE} IMPORTED_CONFIGURATIONS)
foreach(_config ${_configs})
_qt4_add_target_depends_internal(${_QT_MODULE} IMPORTED_LINK_DEPENDENT_LIBRARIES_${_config} ${ARGN})
endforeach()
set(_configs)
endmacro()
# Set QT_xyz_LIBRARY variable and add
# library include path to QT_INCLUDES
_QT4_ADJUST_LIB_VARS(QtCore)
set_property(TARGET Qt4::QtCore APPEND PROPERTY
INTERFACE_INCLUDE_DIRECTORIES
"${QT_MKSPECS_DIR}/default"
${QT_INCLUDE_DIR}
)
set_property(TARGET Qt4::QtCore PROPERTY
INTERFACE_QT_MAJOR_VERSION 4
)
set_property(TARGET Qt4::QtCore APPEND PROPERTY
COMPATIBLE_INTERFACE_STRING QT_MAJOR_VERSION
)
foreach(QT_MODULE ${QT_MODULES})
_QT4_ADJUST_LIB_VARS(${QT_MODULE})
_qt4_add_target_depends(${QT_MODULE} Core)
endforeach()
_QT4_ADJUST_LIB_VARS(QtAssistant)
_QT4_ADJUST_LIB_VARS(QtAssistantClient)
_QT4_ADJUST_LIB_VARS(QtCLucene)
_QT4_ADJUST_LIB_VARS(QtDesignerComponents)
# platform dependent libraries
if(Q_WS_WIN)
_QT4_ADJUST_LIB_VARS(qtmain)
_QT4_ADJUST_LIB_VARS(QAxServer)
set_property(TARGET Qt4::QAxServer PROPERTY
INTERFACE_QT4_NO_LINK_QTMAIN ON
)
set_property(TARGET Qt4::QAxServer APPEND PROPERTY
COMPATIBLE_INTERFACE_BOOL QT4_NO_LINK_QTMAIN)
_QT4_ADJUST_LIB_VARS(QAxContainer)
endif()
# Only public dependencies are listed here.
# Eg, QtDBus links to QtXml, but users of QtDBus do not need to
# link to QtXml because QtDBus only uses it internally, not in public
# headers.
# Everything depends on QtCore, but that is covered above already
_qt4_add_target_depends(Qt3Support Sql Gui Network)
if (TARGET Qt4::Qt3Support)
# An additional define is required for QT3_SUPPORT
set_property(TARGET Qt4::Qt3Support APPEND PROPERTY INTERFACE_COMPILE_DEFINITIONS QT3_SUPPORT)
endif()
_qt4_add_target_depends(QtDeclarative Script Gui)
_qt4_add_target_depends(QtDesigner Gui)
_qt4_add_target_depends(QtHelp Gui)
_qt4_add_target_depends(QtMultimedia Gui)
_qt4_add_target_depends(QtOpenGL Gui)
_qt4_add_target_depends(QtSvg Gui)
_qt4_add_target_depends(QtWebKit Gui Network)
_qt4_add_target_private_depends(Qt3Support Xml)
_qt4_add_target_private_depends(QtSvg Xml)
_qt4_add_target_private_depends(QtDBus Xml)
_qt4_add_target_private_depends(QtUiTools Xml Gui)
_qt4_add_target_private_depends(QtHelp Sql Xml Network)
_qt4_add_target_private_depends(QtXmlPatterns Network)
_qt4_add_target_private_depends(QtScriptTools Gui)
_qt4_add_target_private_depends(QtWebKit XmlPatterns)
_qt4_add_target_private_depends(QtDeclarative XmlPatterns Svg Sql Gui)
_qt4_add_target_private_depends(QtMultimedia Gui)
_qt4_add_target_private_depends(QtOpenGL Gui)
_qt4_add_target_private_depends(QAxServer Gui)
_qt4_add_target_private_depends(QAxContainer Gui)
_qt4_add_target_private_depends(phonon Gui)
if(QT_QTDBUS_FOUND)
_qt4_add_target_private_depends(phonon DBus)
endif()
if (WIN32 AND NOT QT4_NO_LINK_QTMAIN)
set(_isExe $<STREQUAL:$<TARGET_PROPERTY:TYPE>,EXECUTABLE>)
set(_isWin32 $<BOOL:$<TARGET_PROPERTY:WIN32_EXECUTABLE>>)
set(_isNotExcluded $<NOT:$<BOOL:$<TARGET_PROPERTY:QT4_NO_LINK_QTMAIN>>>)
set(_isPolicyNEW $<TARGET_POLICY:CMP0020>)
get_target_property(_configs Qt4::QtCore IMPORTED_CONFIGURATIONS)
foreach(_config ${_configs})
set_property(TARGET Qt4::QtCore APPEND PROPERTY
IMPORTED_LINK_INTERFACE_LIBRARIES_${_config}
$<$<AND:${_isExe},${_isWin32},${_isNotExcluded},${_isPolicyNEW}>:Qt4::qtmain>
)
endforeach()
unset(_configs)
unset(_isExe)
unset(_isWin32)
unset(_isNotExcluded)
unset(_isPolicyNEW)
endif()
#######################################
#
# Check the executables of Qt
# ( moc, uic, rcc )
#
#######################################
if(QT_QMAKE_CHANGED)
set(QT_UIC_EXECUTABLE NOTFOUND)
set(QT_MOC_EXECUTABLE NOTFOUND)
set(QT_UIC3_EXECUTABLE NOTFOUND)
set(QT_RCC_EXECUTABLE NOTFOUND)
set(QT_DBUSCPP2XML_EXECUTABLE NOTFOUND)
set(QT_DBUSXML2CPP_EXECUTABLE NOTFOUND)
set(QT_LUPDATE_EXECUTABLE NOTFOUND)
set(QT_LRELEASE_EXECUTABLE NOTFOUND)
set(QT_QCOLLECTIONGENERATOR_EXECUTABLE NOTFOUND)
set(QT_DESIGNER_EXECUTABLE NOTFOUND)
set(QT_LINGUIST_EXECUTABLE NOTFOUND)
endif()
find_program(QT_MOC_EXECUTABLE
NAMES moc-qt4 moc moc4
PATHS ${QT_BINARY_DIR}
NO_DEFAULT_PATH NO_CMAKE_FIND_ROOT_PATH
)
find_program(QT_UIC_EXECUTABLE
NAMES uic-qt4 uic uic4
PATHS ${QT_BINARY_DIR}
NO_DEFAULT_PATH NO_CMAKE_FIND_ROOT_PATH
)
find_program(QT_UIC3_EXECUTABLE
NAMES uic3
PATHS ${QT_BINARY_DIR}
NO_DEFAULT_PATH NO_CMAKE_FIND_ROOT_PATH
)
find_program(QT_RCC_EXECUTABLE
NAMES rcc
PATHS ${QT_BINARY_DIR}
NO_DEFAULT_PATH NO_CMAKE_FIND_ROOT_PATH
)
find_program(QT_DBUSCPP2XML_EXECUTABLE
NAMES qdbuscpp2xml
PATHS ${QT_BINARY_DIR}
NO_DEFAULT_PATH NO_CMAKE_FIND_ROOT_PATH
)
find_program(QT_DBUSXML2CPP_EXECUTABLE
NAMES qdbusxml2cpp
PATHS ${QT_BINARY_DIR}
NO_DEFAULT_PATH NO_CMAKE_FIND_ROOT_PATH
)
find_program(QT_LUPDATE_EXECUTABLE
NAMES lupdate-qt4 lupdate lupdate4
PATHS ${QT_BINARY_DIR}
NO_DEFAULT_PATH NO_CMAKE_FIND_ROOT_PATH
)
find_program(QT_LRELEASE_EXECUTABLE
NAMES lrelease-qt4 lrelease lrelease4
PATHS ${QT_BINARY_DIR}
NO_DEFAULT_PATH NO_CMAKE_FIND_ROOT_PATH
)
find_program(QT_QCOLLECTIONGENERATOR_EXECUTABLE
NAMES qcollectiongenerator-qt4 qcollectiongenerator
PATHS ${QT_BINARY_DIR}
NO_DEFAULT_PATH NO_CMAKE_FIND_ROOT_PATH
)
find_program(QT_DESIGNER_EXECUTABLE
NAMES designer-qt4 designer designer4
PATHS ${QT_BINARY_DIR}
NO_DEFAULT_PATH NO_CMAKE_FIND_ROOT_PATH
)
find_program(QT_LINGUIST_EXECUTABLE
NAMES linguist-qt4 linguist linguist4
PATHS ${QT_BINARY_DIR}
NO_DEFAULT_PATH NO_CMAKE_FIND_ROOT_PATH
)
if (QT_MOC_EXECUTABLE)
set(QT_WRAP_CPP "YES")
endif ()
if (QT_UIC_EXECUTABLE)
set(QT_WRAP_UI "YES")
endif ()
mark_as_advanced( QT_UIC_EXECUTABLE QT_UIC3_EXECUTABLE QT_MOC_EXECUTABLE
QT_RCC_EXECUTABLE QT_DBUSXML2CPP_EXECUTABLE QT_DBUSCPP2XML_EXECUTABLE
QT_LUPDATE_EXECUTABLE QT_LRELEASE_EXECUTABLE QT_QCOLLECTIONGENERATOR_EXECUTABLE
QT_DESIGNER_EXECUTABLE QT_LINGUIST_EXECUTABLE)
# get the directory of the current file, used later on in the file
get_filename_component( _qt4_current_dir "${CMAKE_CURRENT_LIST_FILE}" PATH)
###############################################
#
# configuration/system dependent settings
#
###############################################
include("${_qt4_current_dir}/Qt4ConfigDependentSettings.cmake")
#######################################
#
# Check the plugins of Qt
#
#######################################
set( QT_PLUGIN_TYPES accessible bearer codecs decorations designer gfxdrivers graphicssystems iconengines imageformats inputmethods mousedrivers phonon_backend script sqldrivers )
set( QT_ACCESSIBLE_PLUGINS qtaccessiblecompatwidgets qtaccessiblewidgets )
set( QT_BEARER_PLUGINS qcorewlanbearer qgenericbearer )
set( QT_CODECS_PLUGINS qcncodecs qjpcodecs qkrcodecs qtwcodecs )
set( QT_DECORATIONS_PLUGINS qdecorationdefault qdecorationwindows )
set( QT_DESIGNER_PLUGINS arthurplugin containerextension customwidgetplugin phononwidgets qdeclarativeview qt3supportwidgets qwebview taskmenuextension worldtimeclockplugin )
set( QT_GRAPHICSDRIVERS_PLUGINS qgfxtransformed qgfxvnc qscreenvfb )
set( QT_GRAPHICSSYSTEMS_PLUGINS qglgraphicssystem qtracegraphicssystem )
set( QT_ICONENGINES_PLUGINS qsvgicon )
set( QT_IMAGEFORMATS_PLUGINS qgif qjpeg qmng qico qsvg qtiff )
set( QT_INPUTMETHODS_PLUGINS qimsw_multi )
set( QT_MOUSEDRIVERS_PLUGINS qwstslibmousehandler )
if(APPLE)
set( QT_PHONON_BACKEND_PLUGINS phonon_qt7 )
elseif(WIN32)
set( QT_PHONON_BACKEND_PLUGINS phonon_ds9 )
endif()
set( QT_SCRIPT_PLUGINS qtscriptdbus )
set( QT_SQLDRIVERS_PLUGINS qsqldb2 qsqlibase qsqlite qsqlite2 qsqlmysql qsqloci qsqlodbc qsqlpsql qsqltds )
set( QT_PHONON_PLUGINS ${QT_PHONON_BACKEND_PLUGINS} )
set( QT_QT3SUPPORT_PLUGINS qtaccessiblecompatwidgets )
set( QT_QTCORE_PLUGINS ${QT_BEARER_PLUGINS} ${QT_CODECS_PLUGINS} )
set( QT_QTGUI_PLUGINS qtaccessiblewidgets qgif qjpeg qmng qico qtiff ${QT_DECORATIONS_PLUGINS} ${QT_GRAPHICSDRIVERS_PLUGINS} ${QT_GRAPHICSSYSTEMS_PLUGINS} ${QT_INPUTMETHODS_PLUGINS} ${QT_MOUSEDRIVERS_PLUGINS} )
set( QT_QTSCRIPT_PLUGINS ${QT_SCRIPT_PLUGINS} )
set( QT_QTSQL_PLUGINS ${QT_SQLDRIVERS_PLUGINS} )
set( QT_QTSVG_PLUGINS qsvg qsvgicon )
if(QT_QMAKE_CHANGED)
foreach(QT_PLUGIN_TYPE ${QT_PLUGIN_TYPES})
string(TOUPPER ${QT_PLUGIN_TYPE} _upper_qt_plugin_type)
set(QT_${_upper_qt_plugin_type}_PLUGINS_DIR ${QT_PLUGINS_DIR}/${QT_PLUGIN_TYPE})
foreach(QT_PLUGIN ${QT_${_upper_qt_plugin_type}_PLUGINS})
string(TOUPPER ${QT_PLUGIN} _upper_qt_plugin)
unset(QT_${_upper_qt_plugin}_LIBRARY_RELEASE CACHE)
unset(QT_${_upper_qt_plugin}_LIBRARY_DEBUG CACHE)
unset(QT_${_upper_qt_plugin}_LIBRARY CACHE)
unset(QT_${_upper_qt_plugin}_PLUGIN_RELEASE CACHE)
unset(QT_${_upper_qt_plugin}_PLUGIN_DEBUG CACHE)
unset(QT_${_upper_qt_plugin}_PLUGIN CACHE)
endforeach()
endforeach()
endif()
# find_library works better than find_file but we need to set prefixes to only match plugins
foreach(QT_PLUGIN_TYPE ${QT_PLUGIN_TYPES})
string(TOUPPER ${QT_PLUGIN_TYPE} _upper_qt_plugin_type)
set(QT_${_upper_qt_plugin_type}_PLUGINS_DIR ${QT_PLUGINS_DIR}/${QT_PLUGIN_TYPE})
foreach(QT_PLUGIN ${QT_${_upper_qt_plugin_type}_PLUGINS})
string(TOUPPER ${QT_PLUGIN} _upper_qt_plugin)
if(QT_IS_STATIC)
find_library(QT_${_upper_qt_plugin}_LIBRARY_RELEASE
NAMES ${QT_PLUGIN}${QT_LIBINFIX} ${QT_PLUGIN}${QT_LIBINFIX}4
PATHS ${QT_${_upper_qt_plugin_type}_PLUGINS_DIR} NO_DEFAULT_PATH NO_CMAKE_FIND_ROOT_PATH
)
find_library(QT_${_upper_qt_plugin}_LIBRARY_DEBUG
NAMES ${QT_PLUGIN}${QT_LIBINFIX}_debug ${QT_PLUGIN}${QT_LIBINFIX}d ${QT_PLUGIN}${QT_LIBINFIX}d4
PATHS ${QT_${_upper_qt_plugin_type}_PLUGINS_DIR} NO_DEFAULT_PATH NO_CMAKE_FIND_ROOT_PATH
)
_QT4_ADJUST_LIB_VARS(${QT_PLUGIN})
else()
# find_library works easier/better than find_file but we need to set suffixes to only match plugins
set(CMAKE_FIND_LIBRARY_SUFFIXES_DEFAULT ${CMAKE_FIND_LIBRARY_SUFFIXES})
set(CMAKE_FIND_LIBRARY_SUFFIXES ${CMAKE_SHARED_MODULE_SUFFIX} ${CMAKE_SHARED_LIBRARY_SUFFIX})
find_library(QT_${_upper_qt_plugin}_PLUGIN_RELEASE
NAMES ${QT_PLUGIN}${QT_LIBINFIX} ${QT_PLUGIN}${QT_LIBINFIX}4
PATHS ${QT_${_upper_qt_plugin_type}_PLUGINS_DIR} NO_DEFAULT_PATH NO_CMAKE_FIND_ROOT_PATH
)
find_library(QT_${_upper_qt_plugin}_PLUGIN_DEBUG
NAMES ${QT_PLUGIN}${QT_LIBINFIX}_debug ${QT_PLUGIN}${QT_LIBINFIX}d ${QT_PLUGIN}${QT_LIBINFIX}d4
PATHS ${QT_${_upper_qt_plugin_type}_PLUGINS_DIR} NO_DEFAULT_PATH NO_CMAKE_FIND_ROOT_PATH
)
mark_as_advanced(QT_${_upper_qt_plugin}_PLUGIN_RELEASE QT_${_upper_qt_plugin}_PLUGIN_DEBUG)
set(CMAKE_FIND_LIBRARY_SUFFIXES ${CMAKE_FIND_LIBRARY_SUFFIXES_DEFAULT})
endif()
endforeach()
endforeach()
######################################
#
# Macros for building Qt files
#
######################################
include("${_qt4_current_dir}/Qt4Macros.cmake")
endif()
#support old QT_MIN_VERSION if set, but not if version is supplied by find_package()
if(NOT Qt4_FIND_VERSION AND QT_MIN_VERSION)
set(Qt4_FIND_VERSION ${QT_MIN_VERSION})
endif()
if( Qt4_FIND_COMPONENTS )
# if components specified in find_package(), make sure each of those pieces were found
set(_QT4_FOUND_REQUIRED_VARS QT_QMAKE_EXECUTABLE QT_MOC_EXECUTABLE QT_RCC_EXECUTABLE QT_INCLUDE_DIR QT_LIBRARY_DIR)
foreach( component ${Qt4_FIND_COMPONENTS} )
string( TOUPPER ${component} _COMPONENT )
if(${_COMPONENT} STREQUAL "QTMAIN")
if(Q_WS_WIN)
set(_QT4_FOUND_REQUIRED_VARS ${_QT4_FOUND_REQUIRED_VARS} QT_${_COMPONENT}_LIBRARY)
endif()
else()
set(_QT4_FOUND_REQUIRED_VARS ${_QT4_FOUND_REQUIRED_VARS} QT_${_COMPONENT}_INCLUDE_DIR QT_${_COMPONENT}_LIBRARY)
endif()
endforeach()
if(Qt4_FIND_COMPONENTS MATCHES QtGui)
set(_QT4_FOUND_REQUIRED_VARS ${_QT4_FOUND_REQUIRED_VARS} QT_UIC_EXECUTABLE)
endif()
else()
# if no components specified, we'll make a default set of required variables to say Qt is found
set(_QT4_FOUND_REQUIRED_VARS QT_QMAKE_EXECUTABLE QT_MOC_EXECUTABLE QT_RCC_EXECUTABLE QT_UIC_EXECUTABLE QT_INCLUDE_DIR
QT_LIBRARY_DIR QT_QTCORE_LIBRARY)
endif()
if (NOT QT_VERSION_MAJOR EQUAL 4)
set(VERSION_MSG "Found unsuitable Qt version \"${QTVERSION}\" from ${QT_QMAKE_EXECUTABLE}")
set(QT4_FOUND FALSE)
if(Qt4_FIND_REQUIRED)
message( FATAL_ERROR "${VERSION_MSG}, this code requires Qt 4.x")
else()
if(NOT Qt4_FIND_QUIETLY)
message( STATUS "${VERSION_MSG}")
endif()
endif()
else()
FIND_PACKAGE_HANDLE_STANDARD_ARGS(Qt4 FOUND_VAR Qt4_FOUND
REQUIRED_VARS ${_QT4_FOUND_REQUIRED_VARS}
VERSION_VAR QTVERSION
)
endif()
#######################################
#
# compatibility settings
#
#######################################
# Backwards compatibility for CMake1.4 and 1.2
set (QT_MOC_EXE ${QT_MOC_EXECUTABLE} )
set (QT_UIC_EXE ${QT_UIC_EXECUTABLE} )
set( QT_QT_LIBRARY "")
set(QT4_FOUND ${Qt4_FOUND})
set(QT_FOUND ${Qt4_FOUND})